Linux Audio

Check our new training course

Loading...
v6.8
  1/*
  2 * Copyright (c) 2008-2011 Atheros Communications Inc.
  3 *
  4 * Permission to use, copy, modify, and/or distribute this software for any
  5 * purpose with or without fee is hereby granted, provided that the above
  6 * copyright notice and this permission notice appear in all copies.
  7 *
  8 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
  9 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
 10 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
 11 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
 12 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
 13 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
 14 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 15 */
 16
 17#include <linux/dma-mapping.h>
 18#include "ath9k.h"
 19
 20#define FUDGE 2
 21
 22static void ath9k_reset_beacon_status(struct ath_softc *sc)
 23{
 24	sc->beacon.tx_processed = false;
 25	sc->beacon.tx_last = false;
 26}
 27
 28/*
 29 *  This function will modify certain transmit queue properties depending on
 30 *  the operating mode of the station (AP or AdHoc).  Parameters are AIFS
 31 *  settings and channel width min/max
 32*/
 33static void ath9k_beaconq_config(struct ath_softc *sc)
 34{
 35	struct ath_hw *ah = sc->sc_ah;
 36	struct ath_common *common = ath9k_hw_common(ah);
 37	struct ath9k_tx_queue_info qi, qi_be;
 38	struct ath_txq *txq;
 39
 40	ath9k_hw_get_txq_props(ah, sc->beacon.beaconq, &qi);
 41
 42	if (sc->sc_ah->opmode == NL80211_IFTYPE_AP ||
 43	    sc->sc_ah->opmode == NL80211_IFTYPE_MESH_POINT) {
 44		/* Always burst out beacon and CAB traffic. */
 45		qi.tqi_aifs = 1;
 46		qi.tqi_cwmin = 0;
 47		qi.tqi_cwmax = 0;
 48	} else {
 49		/* Adhoc mode; important thing is to use 2x cwmin. */
 50		txq = sc->tx.txq_map[IEEE80211_AC_BE];
 51		ath9k_hw_get_txq_props(ah, txq->axq_qnum, &qi_be);
 52		qi.tqi_aifs = qi_be.tqi_aifs;
 53		if (ah->slottime == 20)
 54			qi.tqi_cwmin = 2*qi_be.tqi_cwmin;
 55		else
 56			qi.tqi_cwmin = 4*qi_be.tqi_cwmin;
 57		qi.tqi_cwmax = qi_be.tqi_cwmax;
 58	}
 59
 60	if (!ath9k_hw_set_txq_props(ah, sc->beacon.beaconq, &qi)) {
 61		ath_err(common, "Unable to update h/w beacon queue parameters\n");
 62	} else {
 63		ath9k_hw_resettxqueue(ah, sc->beacon.beaconq);
 64	}
 65}
 66
 67/*
 68 *  Associates the beacon frame buffer with a transmit descriptor.  Will set
 69 *  up rate codes, and channel flags. Beacons are always sent out at the
 70 *  lowest rate, and are not retried.
 71*/
 72static void ath9k_beacon_setup(struct ath_softc *sc, struct ieee80211_vif *vif,
 73			     struct ath_buf *bf, int rateidx)
 74{
 75	struct sk_buff *skb = bf->bf_mpdu;
 76	struct ath_hw *ah = sc->sc_ah;
 77	struct ath_common *common = ath9k_hw_common(ah);
 78	struct ath_tx_info info;
 79	struct ieee80211_supported_band *sband;
 80	u8 chainmask = ah->txchainmask;
 81	u8 i, rate = 0;
 82
 83	sband = &common->sbands[sc->cur_chandef.chan->band];
 84	rate = sband->bitrates[rateidx].hw_value;
 85	if (vif->bss_conf.use_short_preamble)
 86		rate |= sband->bitrates[rateidx].hw_value_short;
 87
 88	memset(&info, 0, sizeof(info));
 89	info.pkt_len = skb->len + FCS_LEN;
 90	info.type = ATH9K_PKT_TYPE_BEACON;
 91	for (i = 0; i < 4; i++)
 92		info.txpower[i] = MAX_RATE_POWER;
 93	info.keyix = ATH9K_TXKEYIX_INVALID;
 94	info.keytype = ATH9K_KEY_TYPE_CLEAR;
 95	info.flags = ATH9K_TXDESC_NOACK | ATH9K_TXDESC_CLRDMASK;
 96
 97	info.buf_addr[0] = bf->bf_buf_addr;
 98	info.buf_len[0] = roundup(skb->len, 4);
 99
100	info.is_first = true;
101	info.is_last = true;
102
103	info.qcu = sc->beacon.beaconq;
104
105	info.rates[0].Tries = 1;
106	info.rates[0].Rate = rate;
107	info.rates[0].ChSel = ath_txchainmask_reduction(sc, chainmask, rate);
108
109	ath9k_hw_set_txdesc(ah, bf->bf_desc, &info);
110}
111
112static struct ath_buf *ath9k_beacon_generate(struct ieee80211_hw *hw,
113					     struct ieee80211_vif *vif)
114{
115	struct ath_softc *sc = hw->priv;
116	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
117	struct ath_buf *bf;
118	struct ath_vif *avp = (void *)vif->drv_priv;
119	struct sk_buff *skb;
120	struct ath_txq *cabq = sc->beacon.cabq;
121	struct ieee80211_tx_info *info;
122	struct ieee80211_mgmt *mgmt_hdr;
123	int cabq_depth;
124
125	if (avp->av_bcbuf == NULL)
126		return NULL;
127
128	bf = avp->av_bcbuf;
129	skb = bf->bf_mpdu;
130	if (skb) {
131		dma_unmap_single(sc->dev, bf->bf_buf_addr,
132				 skb->len, DMA_TO_DEVICE);
133		dev_kfree_skb_any(skb);
134		bf->bf_buf_addr = 0;
135		bf->bf_mpdu = NULL;
136	}
137
138	skb = ieee80211_beacon_get(hw, vif, 0);
139	if (skb == NULL)
140		return NULL;
141
142	bf->bf_mpdu = skb;
143
144	mgmt_hdr = (struct ieee80211_mgmt *)skb->data;
145	mgmt_hdr->u.beacon.timestamp = avp->tsf_adjust;
146
147	info = IEEE80211_SKB_CB(skb);
148
149	ath_assign_seq(common, skb);
150
151	/* Always assign NOA attr when MCC enabled */
152	if (ath9k_is_chanctx_enabled())
153		ath9k_beacon_add_noa(sc, avp, skb);
154
155	bf->bf_buf_addr = dma_map_single(sc->dev, skb->data,
156					 skb->len, DMA_TO_DEVICE);
157	if (unlikely(dma_mapping_error(sc->dev, bf->bf_buf_addr))) {
158		dev_kfree_skb_any(skb);
159		bf->bf_mpdu = NULL;
160		bf->bf_buf_addr = 0;
161		ath_err(common, "dma_mapping_error on beaconing\n");
162		return NULL;
163	}
164
165	skb = ieee80211_get_buffered_bc(hw, vif);
166
167	/*
168	 * if the CABQ traffic from previous DTIM is pending and the current
169	 *  beacon is also a DTIM.
170	 *  1) if there is only one vif let the cab traffic continue.
171	 *  2) if there are more than one vif and we are using staggered
172	 *     beacons, then drain the cabq by dropping all the frames in
173	 *     the cabq so that the current vifs cab traffic can be scheduled.
174	 */
175	spin_lock_bh(&cabq->axq_lock);
176	cabq_depth = cabq->axq_depth;
177	spin_unlock_bh(&cabq->axq_lock);
178
179	if (skb && cabq_depth) {
180		if (sc->cur_chan->nvifs > 1) {
181			ath_dbg(common, BEACON,
182				"Flushing previous cabq traffic\n");
183			ath_draintxq(sc, cabq);
184		}
185	}
186
187	ath9k_beacon_setup(sc, vif, bf, info->control.rates[0].idx);
188
189	if (skb)
190		ath_tx_cabq(hw, vif, skb);
191
192	return bf;
193}
194
195void ath9k_beacon_assign_slot(struct ath_softc *sc, struct ieee80211_vif *vif)
196{
197	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
198	struct ath_vif *avp = (void *)vif->drv_priv;
199	int slot;
200
201	avp->av_bcbuf = list_first_entry(&sc->beacon.bbuf, struct ath_buf, list);
202	list_del(&avp->av_bcbuf->list);
203
204	for (slot = 0; slot < ATH_BCBUF; slot++) {
205		if (sc->beacon.bslot[slot] == NULL) {
206			avp->av_bslot = slot;
207			break;
208		}
209	}
210
211	sc->beacon.bslot[avp->av_bslot] = vif;
 
212
213	ath_dbg(common, CONFIG, "Added interface at beacon slot: %d\n",
214		avp->av_bslot);
215}
216
217void ath9k_beacon_remove_slot(struct ath_softc *sc, struct ieee80211_vif *vif)
218{
219	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
220	struct ath_vif *avp = (void *)vif->drv_priv;
221	struct ath_buf *bf = avp->av_bcbuf;
 
222
223	ath_dbg(common, CONFIG, "Removing interface at beacon slot: %d\n",
224		avp->av_bslot);
225
226	tasklet_disable(&sc->bcon_tasklet);
227
 
 
228	if (bf && bf->bf_mpdu) {
229		struct sk_buff *skb = bf->bf_mpdu;
230		dma_unmap_single(sc->dev, bf->bf_buf_addr,
231				 skb->len, DMA_TO_DEVICE);
232		dev_kfree_skb_any(skb);
233		bf->bf_mpdu = NULL;
234		bf->bf_buf_addr = 0;
235	}
236
237	avp->av_bcbuf = NULL;
238	sc->beacon.bslot[avp->av_bslot] = NULL;
 
239	list_add_tail(&bf->list, &sc->beacon.bbuf);
240
241	tasklet_enable(&sc->bcon_tasklet);
242}
243
244void ath9k_beacon_ensure_primary_slot(struct ath_softc *sc)
245{
246	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
247	struct ieee80211_vif *vif;
248	struct ath_vif *avp;
249	s64 tsfadjust;
250	u32 offset;
251	int first_slot = ATH_BCBUF;
252	int slot;
253
254	tasklet_disable_in_atomic(&sc->bcon_tasklet);
255
256	/* Find first taken slot. */
257	for (slot = 0; slot < ATH_BCBUF; slot++) {
258		if (sc->beacon.bslot[slot]) {
259			first_slot = slot;
260			break;
261		}
262	}
263	if (first_slot == 0)
264		goto out;
265
266	/* Re-enumarate all slots, moving them forward. */
267	for (slot = 0; slot < ATH_BCBUF; slot++) {
268		if (slot + first_slot < ATH_BCBUF) {
269			vif = sc->beacon.bslot[slot + first_slot];
270			sc->beacon.bslot[slot] = vif;
271
272			if (vif) {
273				avp = (void *)vif->drv_priv;
274				avp->av_bslot = slot;
275			}
276		} else {
277			sc->beacon.bslot[slot] = NULL;
278		}
279	}
280
281	vif = sc->beacon.bslot[0];
282	if (WARN_ON(!vif))
283		goto out;
284
285	/* Get the tsf_adjust value for the new first slot. */
286	avp = (void *)vif->drv_priv;
287	tsfadjust = le64_to_cpu(avp->tsf_adjust);
288
289	ath_dbg(common, CONFIG,
290		"Adjusting global TSF after beacon slot reassignment: %lld\n",
291		(signed long long)tsfadjust);
292
293	/* Modify TSF as required and update the HW. */
294	avp->chanctx->tsf_val += tsfadjust;
295	if (sc->cur_chan == avp->chanctx) {
296		offset = ath9k_hw_get_tsf_offset(&avp->chanctx->tsf_ts, NULL);
297		ath9k_hw_settsf64(sc->sc_ah, avp->chanctx->tsf_val + offset);
298	}
299
300	/* The slots tsf_adjust will be updated by ath9k_beacon_config later. */
301
302out:
303	tasklet_enable(&sc->bcon_tasklet);
304}
305
306static int ath9k_beacon_choose_slot(struct ath_softc *sc)
307{
308	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
309	struct ath_beacon_config *cur_conf = &sc->cur_chan->beacon;
310	u16 intval;
311	u32 tsftu;
312	u64 tsf;
313	int slot;
314
315	if (sc->sc_ah->opmode != NL80211_IFTYPE_AP &&
316	    sc->sc_ah->opmode != NL80211_IFTYPE_MESH_POINT) {
317		ath_dbg(common, BEACON, "slot 0, tsf: %llu\n",
318			ath9k_hw_gettsf64(sc->sc_ah));
319		return 0;
320	}
321
322	intval = cur_conf->beacon_interval ? : ATH_DEFAULT_BINTVAL;
323	tsf = ath9k_hw_gettsf64(sc->sc_ah);
324	tsf += TU_TO_USEC(sc->sc_ah->config.sw_beacon_response_time);
325	tsftu = TSF_TO_TU((tsf * ATH_BCBUF) >>32, tsf * ATH_BCBUF);
326	slot = (tsftu % (intval * ATH_BCBUF)) / intval;
327
328	ath_dbg(common, BEACON, "slot: %d tsf: %llu tsftu: %u\n",
329		slot, tsf, tsftu / ATH_BCBUF);
330
331	return slot;
332}
333
334static void ath9k_set_tsfadjust(struct ath_softc *sc,
335				struct ath_beacon_config *cur_conf)
336{
337	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
338	s64 tsfadjust;
339	int slot;
340
341	for (slot = 0; slot < ATH_BCBUF; slot++) {
342		struct ath_vif *avp;
343
344		if (!sc->beacon.bslot[slot])
345			continue;
346
347		avp = (void *)sc->beacon.bslot[slot]->drv_priv;
 
 
348
349		/* tsf_adjust is added to the TSF value. We send out the
350		 * beacon late, so need to adjust the TSF starting point to be
351		 * later in time (i.e. the theoretical first beacon has a TSF
352		 * of 0 after correction).
353		 */
354		tsfadjust = cur_conf->beacon_interval * avp->av_bslot;
355		tsfadjust = -TU_TO_USEC(tsfadjust) / ATH_BCBUF;
356		avp->tsf_adjust = cpu_to_le64(tsfadjust);
357
358		ath_dbg(common, CONFIG, "tsfadjust is: %lld for bslot: %d\n",
359			(signed long long)tsfadjust, avp->av_bslot);
360	}
361}
362
363bool ath9k_csa_is_finished(struct ath_softc *sc, struct ieee80211_vif *vif)
364{
365	if (!vif || !vif->bss_conf.csa_active)
366		return false;
367
368	if (!ieee80211_beacon_cntdwn_is_complete(vif))
369		return false;
370
371	ieee80211_csa_finish(vif);
372	return true;
373}
374
375static void ath9k_csa_update_vif(void *data, u8 *mac, struct ieee80211_vif *vif)
376{
377	struct ath_softc *sc = data;
378	ath9k_csa_is_finished(sc, vif);
379}
380
381void ath9k_csa_update(struct ath_softc *sc)
382{
383	ieee80211_iterate_active_interfaces_atomic(sc->hw,
384						   IEEE80211_IFACE_ITER_NORMAL,
385						   ath9k_csa_update_vif, sc);
386}
387
388void ath9k_beacon_tasklet(struct tasklet_struct *t)
389{
390	struct ath_softc *sc = from_tasklet(sc, t, bcon_tasklet);
391	struct ath_hw *ah = sc->sc_ah;
392	struct ath_common *common = ath9k_hw_common(ah);
393	struct ath_buf *bf = NULL;
394	struct ieee80211_vif *vif;
395	bool edma = !!(ah->caps.hw_caps & ATH9K_HW_CAP_EDMA);
396	int slot;
397
398	if (test_bit(ATH_OP_HW_RESET, &common->op_flags)) {
399		ath_dbg(common, RESET,
400			"reset work is pending, skip beaconing now\n");
401		return;
402	}
403
404	/*
405	 * Check if the previous beacon has gone out.  If
406	 * not don't try to post another, skip this period
407	 * and wait for the next.  Missed beacons indicate
408	 * a problem and should not occur.  If we miss too
409	 * many consecutive beacons reset the device.
410	 */
411	if (ath9k_hw_numtxpending(ah, sc->beacon.beaconq) != 0) {
412		sc->beacon.bmisscnt++;
413
414		ath9k_hw_check_nav(ah);
415
416		/*
417		 * If the previous beacon has not been transmitted
418		 * and a MAC/BB hang has been identified, return
419		 * here because a chip reset would have been
420		 * initiated.
421		 */
422		if (!ath_hw_check(sc))
423			return;
424
425		if (sc->beacon.bmisscnt < BSTUCK_THRESH * sc->nbcnvifs) {
426			ath_dbg(common, BSTUCK,
427				"missed %u consecutive beacons\n",
428				sc->beacon.bmisscnt);
429			ath9k_hw_stop_dma_queue(ah, sc->beacon.beaconq);
430			if (sc->beacon.bmisscnt > 3)
431				ath9k_hw_bstuck_nfcal(ah);
432		} else if (sc->beacon.bmisscnt >= BSTUCK_THRESH) {
433			ath_dbg(common, BSTUCK, "beacon is officially stuck\n");
434			sc->beacon.bmisscnt = 0;
435			ath9k_queue_reset(sc, RESET_TYPE_BEACON_STUCK);
436		}
437
438		return;
439	}
440
441	slot = ath9k_beacon_choose_slot(sc);
442	vif = sc->beacon.bslot[slot];
443
444	/* EDMA devices check that in the tx completion function. */
445	if (!edma) {
446		if (ath9k_is_chanctx_enabled()) {
447			ath_chanctx_beacon_sent_ev(sc,
448					  ATH_CHANCTX_EVENT_BEACON_SENT);
449		}
450
451		if (ath9k_csa_is_finished(sc, vif))
452			return;
453	}
454
455	if (!vif || !vif->bss_conf.enable_beacon)
456		return;
457
458	if (ath9k_is_chanctx_enabled()) {
459		ath_chanctx_event(sc, vif, ATH_CHANCTX_EVENT_BEACON_PREPARE);
460	}
461
462	bf = ath9k_beacon_generate(sc->hw, vif);
463
464	if (sc->beacon.bmisscnt != 0) {
465		ath_dbg(common, BSTUCK, "resume beacon xmit after %u misses\n",
466			sc->beacon.bmisscnt);
467		sc->beacon.bmisscnt = 0;
468	}
469
470	/*
471	 * Handle slot time change when a non-ERP station joins/leaves
472	 * an 11g network.  The 802.11 layer notifies us via callback,
473	 * we mark updateslot, then wait one beacon before effecting
474	 * the change.  This gives associated stations at least one
475	 * beacon interval to note the state change.
476	 *
477	 * NB: The slot time change state machine is clocked according
478	 *     to whether we are bursting or staggering beacons.  We
479	 *     recognize the request to update and record the current
480	 *     slot then don't transition until that slot is reached
481	 *     again.  If we miss a beacon for that slot then we'll be
482	 *     slow to transition but we'll be sure at least one beacon
483	 *     interval has passed.  When bursting slot is always left
484	 *     set to ATH_BCBUF so this check is a noop.
485	 */
486	if (sc->beacon.updateslot == UPDATE) {
487		sc->beacon.updateslot = COMMIT;
488		sc->beacon.slotupdate = slot;
489	} else if (sc->beacon.updateslot == COMMIT &&
490		   sc->beacon.slotupdate == slot) {
491		ah->slottime = sc->beacon.slottime;
492		ath9k_hw_init_global_settings(ah);
493		sc->beacon.updateslot = OK;
494	}
495
496	if (bf) {
497		ath9k_reset_beacon_status(sc);
498
499		ath_dbg(common, BEACON,
500			"Transmitting beacon for slot: %d\n", slot);
501
502		/* NB: cabq traffic should already be queued and primed */
503		ath9k_hw_puttxbuf(ah, sc->beacon.beaconq, bf->bf_daddr);
504
505		if (!edma)
506			ath9k_hw_txstart(ah, sc->beacon.beaconq);
507	}
508}
509
510/*
511 * Both nexttbtt and intval have to be in usecs.
512 */
513static void ath9k_beacon_init(struct ath_softc *sc, u32 nexttbtt,
514			      u32 intval)
515{
516	struct ath_hw *ah = sc->sc_ah;
517
518	ath9k_hw_disable_interrupts(ah);
 
 
519	ath9k_beaconq_config(sc);
520	ath9k_hw_beaconinit(ah, nexttbtt, intval);
521	ah->imask |= ATH9K_INT_SWBA;
522	sc->beacon.bmisscnt = 0;
523	ath9k_hw_set_interrupts(ah);
524	ath9k_hw_enable_interrupts(ah);
525}
526
527static void ath9k_beacon_stop(struct ath_softc *sc)
528{
529	ath9k_hw_disable_interrupts(sc->sc_ah);
530	sc->sc_ah->imask &= ~(ATH9K_INT_SWBA | ATH9K_INT_BMISS);
531	sc->beacon.bmisscnt = 0;
532	ath9k_hw_set_interrupts(sc->sc_ah);
533	ath9k_hw_enable_interrupts(sc->sc_ah);
534}
535
536/*
537 * For multi-bss ap support beacons are either staggered evenly over N slots or
538 * burst together.  For the former arrange for the SWBA to be delivered for each
539 * slot. Slots that are not occupied will generate nothing.
540 */
541static void ath9k_beacon_config_ap(struct ath_softc *sc,
542				   struct ath_beacon_config *conf)
543{
544	struct ath_hw *ah = sc->sc_ah;
545
546	ath9k_cmn_beacon_config_ap(ah, conf, ATH_BCBUF);
547	ath9k_beacon_init(sc, conf->nexttbtt, conf->intval);
548}
549
550static void ath9k_beacon_config_sta(struct ath_hw *ah,
551				    struct ath_beacon_config *conf)
552{
553	struct ath9k_beacon_state bs;
554
555	if (ath9k_cmn_beacon_config_sta(ah, conf, &bs) == -EPERM)
556		return;
557
558	ath9k_hw_disable_interrupts(ah);
559	ath9k_hw_set_sta_beacon_timers(ah, &bs);
560	ah->imask |= ATH9K_INT_BMISS;
561
562	ath9k_hw_set_interrupts(ah);
563	ath9k_hw_enable_interrupts(ah);
564}
565
566static void ath9k_beacon_config_adhoc(struct ath_softc *sc,
567				      struct ath_beacon_config *conf)
568{
569	struct ath_hw *ah = sc->sc_ah;
570	struct ath_common *common = ath9k_hw_common(ah);
571
572	ath9k_reset_beacon_status(sc);
573
574	ath9k_cmn_beacon_config_adhoc(ah, conf);
575
576	ath9k_beacon_init(sc, conf->nexttbtt, conf->intval);
577
578	/*
579	 * Set the global 'beacon has been configured' flag for the
580	 * joiner case in IBSS mode.
581	 */
582	if (!conf->ibss_creator && conf->enable_beacon)
583		set_bit(ATH_OP_BEACONS, &common->op_flags);
584}
585
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
586static void ath9k_cache_beacon_config(struct ath_softc *sc,
587				      struct ath_chanctx *ctx,
588				      struct ieee80211_vif *vif)
589{
590	struct ieee80211_bss_conf *bss_conf = &vif->bss_conf;
591	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
592	struct ath_beacon_config *cur_conf = &ctx->beacon;
593
594	ath_dbg(common, BEACON,
595		"Caching beacon data for BSS: %pM\n", bss_conf->bssid);
596
597	cur_conf->beacon_interval = bss_conf->beacon_int;
598	cur_conf->dtim_period = bss_conf->dtim_period;
599	cur_conf->dtim_count = 1;
600	cur_conf->ibss_creator = vif->cfg.ibss_creator;
601
602	/*
603	 * It looks like mac80211 may end up using beacon interval of zero in
604	 * some cases (at least for mesh point). Avoid getting into an
605	 * infinite loop by using a bit safer value instead. To be safe,
606	 * do sanity check on beacon interval for all operating modes.
607	 */
608	if (cur_conf->beacon_interval == 0)
609		cur_conf->beacon_interval = 100;
610
611	cur_conf->bmiss_timeout =
612		ATH_DEFAULT_BMISS_LIMIT * cur_conf->beacon_interval;
613
614	/*
615	 * We don't parse dtim period from mac80211 during the driver
616	 * initialization as it breaks association with hidden-ssid
617	 * AP and it causes latency in roaming
618	 */
619	if (cur_conf->dtim_period == 0)
620		cur_conf->dtim_period = 1;
621
622	ath9k_set_tsfadjust(sc, cur_conf);
623}
624
625void ath9k_beacon_config(struct ath_softc *sc, struct ieee80211_vif *main_vif,
626			 bool beacons)
627{
628	struct ath_hw *ah = sc->sc_ah;
629	struct ath_common *common = ath9k_hw_common(ah);
630	struct ath_vif *avp;
631	struct ath_chanctx *ctx;
 
632	struct ath_beacon_config *cur_conf;
633	unsigned long flags;
634	bool enabled;
635	bool skip_beacon = false;
636
637	if (!beacons) {
638		clear_bit(ATH_OP_BEACONS, &common->op_flags);
639		ath9k_beacon_stop(sc);
640		return;
641	}
642
643	if (WARN_ON(!main_vif))
644		return;
 
645
646	avp = (void *)main_vif->drv_priv;
647	ctx = avp->chanctx;
648	cur_conf = &ctx->beacon;
649	enabled = cur_conf->enable_beacon;
650	cur_conf->enable_beacon = beacons;
651
652	if (sc->sc_ah->opmode == NL80211_IFTYPE_STATION) {
653		ath9k_cache_beacon_config(sc, ctx, main_vif);
 
 
654
655		ath9k_set_beacon(sc);
656		set_bit(ATH_OP_BEACONS, &common->op_flags);
657		return;
658	}
659
660	/* Update the beacon configuration. */
661	ath9k_cache_beacon_config(sc, ctx, main_vif);
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
662
663	/*
664	 * Configure the HW beacon registers only when we have a valid
665	 * beacon interval.
666	 */
667	if (cur_conf->beacon_interval) {
668		/* Special case to sync the TSF when joining an existing IBSS.
669		 * This is only done if no AP interface is active.
670		 * Note that mac80211 always resets the TSF when creating a new
671		 * IBSS interface.
672		 */
673		if (sc->sc_ah->opmode == NL80211_IFTYPE_ADHOC &&
674		    !enabled && beacons && !main_vif->cfg.ibss_creator) {
675			spin_lock_irqsave(&sc->sc_pm_lock, flags);
676			sc->ps_flags |= PS_BEACON_SYNC | PS_WAIT_FOR_BEACON;
677			spin_unlock_irqrestore(&sc->sc_pm_lock, flags);
678			skip_beacon = true;
 
 
679		}
680
681		/*
682		 * Do not set the ATH_OP_BEACONS flag for IBSS joiner mode
683		 * here, it is done in ath9k_beacon_config_adhoc().
684		 */
685		if (beacons && !skip_beacon) {
686			set_bit(ATH_OP_BEACONS, &common->op_flags);
687			ath9k_set_beacon(sc);
688		} else {
689			clear_bit(ATH_OP_BEACONS, &common->op_flags);
690			ath9k_beacon_stop(sc);
691		}
692	} else {
693		clear_bit(ATH_OP_BEACONS, &common->op_flags);
694		ath9k_beacon_stop(sc);
695	}
696}
697
698void ath9k_set_beacon(struct ath_softc *sc)
699{
700	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
701	struct ath_beacon_config *cur_conf = &sc->cur_chan->beacon;
702
703	switch (sc->sc_ah->opmode) {
704	case NL80211_IFTYPE_AP:
705	case NL80211_IFTYPE_MESH_POINT:
706		ath9k_beacon_config_ap(sc, cur_conf);
707		break;
708	case NL80211_IFTYPE_ADHOC:
709		ath9k_beacon_config_adhoc(sc, cur_conf);
710		break;
711	case NL80211_IFTYPE_STATION:
712		ath9k_beacon_config_sta(sc->sc_ah, cur_conf);
713		break;
714	default:
715		ath_dbg(common, CONFIG, "Unsupported beaconing mode\n");
716		return;
717	}
718}
v4.6
  1/*
  2 * Copyright (c) 2008-2011 Atheros Communications Inc.
  3 *
  4 * Permission to use, copy, modify, and/or distribute this software for any
  5 * purpose with or without fee is hereby granted, provided that the above
  6 * copyright notice and this permission notice appear in all copies.
  7 *
  8 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
  9 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
 10 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
 11 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
 12 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
 13 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
 14 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 15 */
 16
 17#include <linux/dma-mapping.h>
 18#include "ath9k.h"
 19
 20#define FUDGE 2
 21
 22static void ath9k_reset_beacon_status(struct ath_softc *sc)
 23{
 24	sc->beacon.tx_processed = false;
 25	sc->beacon.tx_last = false;
 26}
 27
 28/*
 29 *  This function will modify certain transmit queue properties depending on
 30 *  the operating mode of the station (AP or AdHoc).  Parameters are AIFS
 31 *  settings and channel width min/max
 32*/
 33static void ath9k_beaconq_config(struct ath_softc *sc)
 34{
 35	struct ath_hw *ah = sc->sc_ah;
 36	struct ath_common *common = ath9k_hw_common(ah);
 37	struct ath9k_tx_queue_info qi, qi_be;
 38	struct ath_txq *txq;
 39
 40	ath9k_hw_get_txq_props(ah, sc->beacon.beaconq, &qi);
 41
 42	if (sc->sc_ah->opmode == NL80211_IFTYPE_AP ||
 43	    sc->sc_ah->opmode == NL80211_IFTYPE_MESH_POINT) {
 44		/* Always burst out beacon and CAB traffic. */
 45		qi.tqi_aifs = 1;
 46		qi.tqi_cwmin = 0;
 47		qi.tqi_cwmax = 0;
 48	} else {
 49		/* Adhoc mode; important thing is to use 2x cwmin. */
 50		txq = sc->tx.txq_map[IEEE80211_AC_BE];
 51		ath9k_hw_get_txq_props(ah, txq->axq_qnum, &qi_be);
 52		qi.tqi_aifs = qi_be.tqi_aifs;
 53		if (ah->slottime == ATH9K_SLOT_TIME_20)
 54			qi.tqi_cwmin = 2*qi_be.tqi_cwmin;
 55		else
 56			qi.tqi_cwmin = 4*qi_be.tqi_cwmin;
 57		qi.tqi_cwmax = qi_be.tqi_cwmax;
 58	}
 59
 60	if (!ath9k_hw_set_txq_props(ah, sc->beacon.beaconq, &qi)) {
 61		ath_err(common, "Unable to update h/w beacon queue parameters\n");
 62	} else {
 63		ath9k_hw_resettxqueue(ah, sc->beacon.beaconq);
 64	}
 65}
 66
 67/*
 68 *  Associates the beacon frame buffer with a transmit descriptor.  Will set
 69 *  up rate codes, and channel flags. Beacons are always sent out at the
 70 *  lowest rate, and are not retried.
 71*/
 72static void ath9k_beacon_setup(struct ath_softc *sc, struct ieee80211_vif *vif,
 73			     struct ath_buf *bf, int rateidx)
 74{
 75	struct sk_buff *skb = bf->bf_mpdu;
 76	struct ath_hw *ah = sc->sc_ah;
 77	struct ath_common *common = ath9k_hw_common(ah);
 78	struct ath_tx_info info;
 79	struct ieee80211_supported_band *sband;
 80	u8 chainmask = ah->txchainmask;
 81	u8 i, rate = 0;
 82
 83	sband = &common->sbands[sc->cur_chandef.chan->band];
 84	rate = sband->bitrates[rateidx].hw_value;
 85	if (vif->bss_conf.use_short_preamble)
 86		rate |= sband->bitrates[rateidx].hw_value_short;
 87
 88	memset(&info, 0, sizeof(info));
 89	info.pkt_len = skb->len + FCS_LEN;
 90	info.type = ATH9K_PKT_TYPE_BEACON;
 91	for (i = 0; i < 4; i++)
 92		info.txpower[i] = MAX_RATE_POWER;
 93	info.keyix = ATH9K_TXKEYIX_INVALID;
 94	info.keytype = ATH9K_KEY_TYPE_CLEAR;
 95	info.flags = ATH9K_TXDESC_NOACK | ATH9K_TXDESC_CLRDMASK;
 96
 97	info.buf_addr[0] = bf->bf_buf_addr;
 98	info.buf_len[0] = roundup(skb->len, 4);
 99
100	info.is_first = true;
101	info.is_last = true;
102
103	info.qcu = sc->beacon.beaconq;
104
105	info.rates[0].Tries = 1;
106	info.rates[0].Rate = rate;
107	info.rates[0].ChSel = ath_txchainmask_reduction(sc, chainmask, rate);
108
109	ath9k_hw_set_txdesc(ah, bf->bf_desc, &info);
110}
111
112static struct ath_buf *ath9k_beacon_generate(struct ieee80211_hw *hw,
113					     struct ieee80211_vif *vif)
114{
115	struct ath_softc *sc = hw->priv;
116	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
117	struct ath_buf *bf;
118	struct ath_vif *avp = (void *)vif->drv_priv;
119	struct sk_buff *skb;
120	struct ath_txq *cabq = sc->beacon.cabq;
121	struct ieee80211_tx_info *info;
122	struct ieee80211_mgmt *mgmt_hdr;
123	int cabq_depth;
124
125	if (avp->av_bcbuf == NULL)
126		return NULL;
127
128	bf = avp->av_bcbuf;
129	skb = bf->bf_mpdu;
130	if (skb) {
131		dma_unmap_single(sc->dev, bf->bf_buf_addr,
132				 skb->len, DMA_TO_DEVICE);
133		dev_kfree_skb_any(skb);
134		bf->bf_buf_addr = 0;
135		bf->bf_mpdu = NULL;
136	}
137
138	skb = ieee80211_beacon_get(hw, vif);
139	if (skb == NULL)
140		return NULL;
141
142	bf->bf_mpdu = skb;
143
144	mgmt_hdr = (struct ieee80211_mgmt *)skb->data;
145	mgmt_hdr->u.beacon.timestamp = avp->tsf_adjust;
146
147	info = IEEE80211_SKB_CB(skb);
148
149	ath_assign_seq(common, skb);
150
151	/* Always assign NOA attr when MCC enabled */
152	if (ath9k_is_chanctx_enabled())
153		ath9k_beacon_add_noa(sc, avp, skb);
154
155	bf->bf_buf_addr = dma_map_single(sc->dev, skb->data,
156					 skb->len, DMA_TO_DEVICE);
157	if (unlikely(dma_mapping_error(sc->dev, bf->bf_buf_addr))) {
158		dev_kfree_skb_any(skb);
159		bf->bf_mpdu = NULL;
160		bf->bf_buf_addr = 0;
161		ath_err(common, "dma_mapping_error on beaconing\n");
162		return NULL;
163	}
164
165	skb = ieee80211_get_buffered_bc(hw, vif);
166
167	/*
168	 * if the CABQ traffic from previous DTIM is pending and the current
169	 *  beacon is also a DTIM.
170	 *  1) if there is only one vif let the cab traffic continue.
171	 *  2) if there are more than one vif and we are using staggered
172	 *     beacons, then drain the cabq by dropping all the frames in
173	 *     the cabq so that the current vifs cab traffic can be scheduled.
174	 */
175	spin_lock_bh(&cabq->axq_lock);
176	cabq_depth = cabq->axq_depth;
177	spin_unlock_bh(&cabq->axq_lock);
178
179	if (skb && cabq_depth) {
180		if (sc->cur_chan->nvifs > 1) {
181			ath_dbg(common, BEACON,
182				"Flushing previous cabq traffic\n");
183			ath_draintxq(sc, cabq);
184		}
185	}
186
187	ath9k_beacon_setup(sc, vif, bf, info->control.rates[0].idx);
188
189	if (skb)
190		ath_tx_cabq(hw, vif, skb);
191
192	return bf;
193}
194
195void ath9k_beacon_assign_slot(struct ath_softc *sc, struct ieee80211_vif *vif)
196{
197	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
198	struct ath_vif *avp = (void *)vif->drv_priv;
199	int slot;
200
201	avp->av_bcbuf = list_first_entry(&sc->beacon.bbuf, struct ath_buf, list);
202	list_del(&avp->av_bcbuf->list);
203
204	for (slot = 0; slot < ATH_BCBUF; slot++) {
205		if (sc->beacon.bslot[slot] == NULL) {
206			avp->av_bslot = slot;
207			break;
208		}
209	}
210
211	sc->beacon.bslot[avp->av_bslot] = vif;
212	sc->nbcnvifs++;
213
214	ath_dbg(common, CONFIG, "Added interface at beacon slot: %d\n",
215		avp->av_bslot);
216}
217
218void ath9k_beacon_remove_slot(struct ath_softc *sc, struct ieee80211_vif *vif)
219{
220	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
221	struct ath_vif *avp = (void *)vif->drv_priv;
222	struct ath_buf *bf = avp->av_bcbuf;
223	struct ath_beacon_config *cur_conf = &sc->cur_chan->beacon;
224
225	ath_dbg(common, CONFIG, "Removing interface at beacon slot: %d\n",
226		avp->av_bslot);
227
228	tasklet_disable(&sc->bcon_tasklet);
229
230	cur_conf->enable_beacon &= ~BIT(avp->av_bslot);
231
232	if (bf && bf->bf_mpdu) {
233		struct sk_buff *skb = bf->bf_mpdu;
234		dma_unmap_single(sc->dev, bf->bf_buf_addr,
235				 skb->len, DMA_TO_DEVICE);
236		dev_kfree_skb_any(skb);
237		bf->bf_mpdu = NULL;
238		bf->bf_buf_addr = 0;
239	}
240
241	avp->av_bcbuf = NULL;
242	sc->beacon.bslot[avp->av_bslot] = NULL;
243	sc->nbcnvifs--;
244	list_add_tail(&bf->list, &sc->beacon.bbuf);
245
246	tasklet_enable(&sc->bcon_tasklet);
247}
248
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
249static int ath9k_beacon_choose_slot(struct ath_softc *sc)
250{
251	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
252	struct ath_beacon_config *cur_conf = &sc->cur_chan->beacon;
253	u16 intval;
254	u32 tsftu;
255	u64 tsf;
256	int slot;
257
258	if (sc->sc_ah->opmode != NL80211_IFTYPE_AP &&
259	    sc->sc_ah->opmode != NL80211_IFTYPE_MESH_POINT) {
260		ath_dbg(common, BEACON, "slot 0, tsf: %llu\n",
261			ath9k_hw_gettsf64(sc->sc_ah));
262		return 0;
263	}
264
265	intval = cur_conf->beacon_interval ? : ATH_DEFAULT_BINTVAL;
266	tsf = ath9k_hw_gettsf64(sc->sc_ah);
267	tsf += TU_TO_USEC(sc->sc_ah->config.sw_beacon_response_time);
268	tsftu = TSF_TO_TU((tsf * ATH_BCBUF) >>32, tsf * ATH_BCBUF);
269	slot = (tsftu % (intval * ATH_BCBUF)) / intval;
270
271	ath_dbg(common, BEACON, "slot: %d tsf: %llu tsftu: %u\n",
272		slot, tsf, tsftu / ATH_BCBUF);
273
274	return slot;
275}
276
277static void ath9k_set_tsfadjust(struct ath_softc *sc, struct ieee80211_vif *vif)
 
278{
279	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
280	struct ath_vif *avp = (void *)vif->drv_priv;
281	struct ath_beacon_config *cur_conf = &avp->chanctx->beacon;
282	u32 tsfadjust;
 
 
283
284	if (avp->av_bslot == 0)
285		return;
286
287	tsfadjust = cur_conf->beacon_interval * avp->av_bslot;
288	tsfadjust = TU_TO_USEC(tsfadjust) / ATH_BCBUF;
289	avp->tsf_adjust = cpu_to_le64(tsfadjust);
290
291	ath_dbg(common, CONFIG, "tsfadjust is: %llu for bslot: %d\n",
292		(unsigned long long)tsfadjust, avp->av_bslot);
 
 
 
 
 
 
 
 
 
 
293}
294
295bool ath9k_csa_is_finished(struct ath_softc *sc, struct ieee80211_vif *vif)
296{
297	if (!vif || !vif->csa_active)
298		return false;
299
300	if (!ieee80211_csa_is_complete(vif))
301		return false;
302
303	ieee80211_csa_finish(vif);
304	return true;
305}
306
307static void ath9k_csa_update_vif(void *data, u8 *mac, struct ieee80211_vif *vif)
308{
309	struct ath_softc *sc = data;
310	ath9k_csa_is_finished(sc, vif);
311}
312
313void ath9k_csa_update(struct ath_softc *sc)
314{
315	ieee80211_iterate_active_interfaces_atomic(sc->hw,
316						   IEEE80211_IFACE_ITER_NORMAL,
317						   ath9k_csa_update_vif, sc);
318}
319
320void ath9k_beacon_tasklet(unsigned long data)
321{
322	struct ath_softc *sc = (struct ath_softc *)data;
323	struct ath_hw *ah = sc->sc_ah;
324	struct ath_common *common = ath9k_hw_common(ah);
325	struct ath_buf *bf = NULL;
326	struct ieee80211_vif *vif;
327	bool edma = !!(ah->caps.hw_caps & ATH9K_HW_CAP_EDMA);
328	int slot;
329
330	if (test_bit(ATH_OP_HW_RESET, &common->op_flags)) {
331		ath_dbg(common, RESET,
332			"reset work is pending, skip beaconing now\n");
333		return;
334	}
335
336	/*
337	 * Check if the previous beacon has gone out.  If
338	 * not don't try to post another, skip this period
339	 * and wait for the next.  Missed beacons indicate
340	 * a problem and should not occur.  If we miss too
341	 * many consecutive beacons reset the device.
342	 */
343	if (ath9k_hw_numtxpending(ah, sc->beacon.beaconq) != 0) {
344		sc->beacon.bmisscnt++;
345
346		ath9k_hw_check_nav(ah);
347
348		/*
349		 * If the previous beacon has not been transmitted
350		 * and a MAC/BB hang has been identified, return
351		 * here because a chip reset would have been
352		 * initiated.
353		 */
354		if (!ath_hw_check(sc))
355			return;
356
357		if (sc->beacon.bmisscnt < BSTUCK_THRESH * sc->nbcnvifs) {
358			ath_dbg(common, BSTUCK,
359				"missed %u consecutive beacons\n",
360				sc->beacon.bmisscnt);
361			ath9k_hw_stop_dma_queue(ah, sc->beacon.beaconq);
362			if (sc->beacon.bmisscnt > 3)
363				ath9k_hw_bstuck_nfcal(ah);
364		} else if (sc->beacon.bmisscnt >= BSTUCK_THRESH) {
365			ath_dbg(common, BSTUCK, "beacon is officially stuck\n");
366			sc->beacon.bmisscnt = 0;
367			ath9k_queue_reset(sc, RESET_TYPE_BEACON_STUCK);
368		}
369
370		return;
371	}
372
373	slot = ath9k_beacon_choose_slot(sc);
374	vif = sc->beacon.bslot[slot];
375
376	/* EDMA devices check that in the tx completion function. */
377	if (!edma) {
378		if (ath9k_is_chanctx_enabled()) {
379			ath_chanctx_beacon_sent_ev(sc,
380					  ATH_CHANCTX_EVENT_BEACON_SENT);
381		}
382
383		if (ath9k_csa_is_finished(sc, vif))
384			return;
385	}
386
387	if (!vif || !vif->bss_conf.enable_beacon)
388		return;
389
390	if (ath9k_is_chanctx_enabled()) {
391		ath_chanctx_event(sc, vif, ATH_CHANCTX_EVENT_BEACON_PREPARE);
392	}
393
394	bf = ath9k_beacon_generate(sc->hw, vif);
395
396	if (sc->beacon.bmisscnt != 0) {
397		ath_dbg(common, BSTUCK, "resume beacon xmit after %u misses\n",
398			sc->beacon.bmisscnt);
399		sc->beacon.bmisscnt = 0;
400	}
401
402	/*
403	 * Handle slot time change when a non-ERP station joins/leaves
404	 * an 11g network.  The 802.11 layer notifies us via callback,
405	 * we mark updateslot, then wait one beacon before effecting
406	 * the change.  This gives associated stations at least one
407	 * beacon interval to note the state change.
408	 *
409	 * NB: The slot time change state machine is clocked according
410	 *     to whether we are bursting or staggering beacons.  We
411	 *     recognize the request to update and record the current
412	 *     slot then don't transition until that slot is reached
413	 *     again.  If we miss a beacon for that slot then we'll be
414	 *     slow to transition but we'll be sure at least one beacon
415	 *     interval has passed.  When bursting slot is always left
416	 *     set to ATH_BCBUF so this check is a noop.
417	 */
418	if (sc->beacon.updateslot == UPDATE) {
419		sc->beacon.updateslot = COMMIT;
420		sc->beacon.slotupdate = slot;
421	} else if (sc->beacon.updateslot == COMMIT &&
422		   sc->beacon.slotupdate == slot) {
423		ah->slottime = sc->beacon.slottime;
424		ath9k_hw_init_global_settings(ah);
425		sc->beacon.updateslot = OK;
426	}
427
428	if (bf) {
429		ath9k_reset_beacon_status(sc);
430
431		ath_dbg(common, BEACON,
432			"Transmitting beacon for slot: %d\n", slot);
433
434		/* NB: cabq traffic should already be queued and primed */
435		ath9k_hw_puttxbuf(ah, sc->beacon.beaconq, bf->bf_daddr);
436
437		if (!edma)
438			ath9k_hw_txstart(ah, sc->beacon.beaconq);
439	}
440}
441
442/*
443 * Both nexttbtt and intval have to be in usecs.
444 */
445static void ath9k_beacon_init(struct ath_softc *sc, u32 nexttbtt,
446			      u32 intval, bool reset_tsf)
447{
448	struct ath_hw *ah = sc->sc_ah;
449
450	ath9k_hw_disable_interrupts(ah);
451	if (reset_tsf)
452		ath9k_hw_reset_tsf(ah);
453	ath9k_beaconq_config(sc);
454	ath9k_hw_beaconinit(ah, nexttbtt, intval);
 
455	sc->beacon.bmisscnt = 0;
456	ath9k_hw_set_interrupts(ah);
457	ath9k_hw_enable_interrupts(ah);
458}
459
 
 
 
 
 
 
 
 
 
460/*
461 * For multi-bss ap support beacons are either staggered evenly over N slots or
462 * burst together.  For the former arrange for the SWBA to be delivered for each
463 * slot. Slots that are not occupied will generate nothing.
464 */
465static void ath9k_beacon_config_ap(struct ath_softc *sc,
466				   struct ath_beacon_config *conf)
467{
468	struct ath_hw *ah = sc->sc_ah;
469
470	ath9k_cmn_beacon_config_ap(ah, conf, ATH_BCBUF);
471	ath9k_beacon_init(sc, conf->nexttbtt, conf->intval, false);
472}
473
474static void ath9k_beacon_config_sta(struct ath_hw *ah,
475				    struct ath_beacon_config *conf)
476{
477	struct ath9k_beacon_state bs;
478
479	if (ath9k_cmn_beacon_config_sta(ah, conf, &bs) == -EPERM)
480		return;
481
482	ath9k_hw_disable_interrupts(ah);
483	ath9k_hw_set_sta_beacon_timers(ah, &bs);
484	ah->imask |= ATH9K_INT_BMISS;
485
486	ath9k_hw_set_interrupts(ah);
487	ath9k_hw_enable_interrupts(ah);
488}
489
490static void ath9k_beacon_config_adhoc(struct ath_softc *sc,
491				      struct ath_beacon_config *conf)
492{
493	struct ath_hw *ah = sc->sc_ah;
494	struct ath_common *common = ath9k_hw_common(ah);
495
496	ath9k_reset_beacon_status(sc);
497
498	ath9k_cmn_beacon_config_adhoc(ah, conf);
499
500	ath9k_beacon_init(sc, conf->nexttbtt, conf->intval, conf->ibss_creator);
501
502	/*
503	 * Set the global 'beacon has been configured' flag for the
504	 * joiner case in IBSS mode.
505	 */
506	if (!conf->ibss_creator && conf->enable_beacon)
507		set_bit(ATH_OP_BEACONS, &common->op_flags);
508}
509
510static bool ath9k_allow_beacon_config(struct ath_softc *sc,
511				      struct ieee80211_vif *vif)
512{
513	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
514	struct ath_vif *avp = (void *)vif->drv_priv;
515
516	if (ath9k_is_chanctx_enabled()) {
517		/*
518		 * If the VIF is not present in the current channel context,
519		 * then we can't do the usual opmode checks. Allow the
520		 * beacon config for the VIF to be updated in this case and
521		 * return immediately.
522		 */
523		if (sc->cur_chan != avp->chanctx)
524			return true;
525	}
526
527	if (sc->sc_ah->opmode == NL80211_IFTYPE_AP) {
528		if (vif->type != NL80211_IFTYPE_AP) {
529			ath_dbg(common, CONFIG,
530				"An AP interface is already present !\n");
531			return false;
532		}
533	}
534
535	if (sc->sc_ah->opmode == NL80211_IFTYPE_STATION) {
536		if ((vif->type == NL80211_IFTYPE_STATION) &&
537		    test_bit(ATH_OP_BEACONS, &common->op_flags) &&
538		    vif != sc->cur_chan->primary_sta) {
539			ath_dbg(common, CONFIG,
540				"Beacon already configured for a station interface\n");
541			return false;
542		}
543	}
544
545	return true;
546}
547
548static void ath9k_cache_beacon_config(struct ath_softc *sc,
549				      struct ath_chanctx *ctx,
550				      struct ieee80211_bss_conf *bss_conf)
551{
 
552	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
553	struct ath_beacon_config *cur_conf = &ctx->beacon;
554
555	ath_dbg(common, BEACON,
556		"Caching beacon data for BSS: %pM\n", bss_conf->bssid);
557
558	cur_conf->beacon_interval = bss_conf->beacon_int;
559	cur_conf->dtim_period = bss_conf->dtim_period;
560	cur_conf->dtim_count = 1;
561	cur_conf->ibss_creator = bss_conf->ibss_creator;
562
563	/*
564	 * It looks like mac80211 may end up using beacon interval of zero in
565	 * some cases (at least for mesh point). Avoid getting into an
566	 * infinite loop by using a bit safer value instead. To be safe,
567	 * do sanity check on beacon interval for all operating modes.
568	 */
569	if (cur_conf->beacon_interval == 0)
570		cur_conf->beacon_interval = 100;
571
572	cur_conf->bmiss_timeout =
573		ATH_DEFAULT_BMISS_LIMIT * cur_conf->beacon_interval;
574
575	/*
576	 * We don't parse dtim period from mac80211 during the driver
577	 * initialization as it breaks association with hidden-ssid
578	 * AP and it causes latency in roaming
579	 */
580	if (cur_conf->dtim_period == 0)
581		cur_conf->dtim_period = 1;
582
 
583}
584
585void ath9k_beacon_config(struct ath_softc *sc, struct ieee80211_vif *vif,
586			 u32 changed)
587{
588	struct ieee80211_bss_conf *bss_conf = &vif->bss_conf;
589        struct ath_hw *ah = sc->sc_ah;
590        struct ath_common *common = ath9k_hw_common(ah);
591	struct ath_vif *avp = (void *)vif->drv_priv;
592	struct ath_chanctx *ctx = avp->chanctx;
593	struct ath_beacon_config *cur_conf;
594	unsigned long flags;
 
595	bool skip_beacon = false;
596
597	if (!ctx)
 
 
598		return;
 
599
600	cur_conf = &avp->chanctx->beacon;
601	if (vif->type == NL80211_IFTYPE_AP)
602		ath9k_set_tsfadjust(sc, vif);
603
604	if (!ath9k_allow_beacon_config(sc, vif))
605		return;
 
 
 
606
607	if (vif->type == NL80211_IFTYPE_STATION) {
608		ath9k_cache_beacon_config(sc, ctx, bss_conf);
609		if (ctx != sc->cur_chan)
610			return;
611
612		ath9k_set_beacon(sc);
613		set_bit(ATH_OP_BEACONS, &common->op_flags);
614		return;
615	}
616
617	/*
618	 * Take care of multiple interfaces when
619	 * enabling/disabling SWBA.
620	 */
621	if (changed & BSS_CHANGED_BEACON_ENABLED) {
622		bool enabled = cur_conf->enable_beacon;
623
624		if (!bss_conf->enable_beacon) {
625			cur_conf->enable_beacon &= ~BIT(avp->av_bslot);
626		} else {
627			cur_conf->enable_beacon |= BIT(avp->av_bslot);
628			if (!enabled)
629				ath9k_cache_beacon_config(sc, ctx, bss_conf);
630		}
631	}
632
633	if (ctx != sc->cur_chan)
634		return;
635
636	/*
637	 * Configure the HW beacon registers only when we have a valid
638	 * beacon interval.
639	 */
640	if (cur_conf->beacon_interval) {
641		/*
642		 * If we are joining an existing IBSS network, start beaconing
643		 * only after a TSF-sync has taken place. Ensure that this
644		 * happens by setting the appropriate flags.
645		 */
646		if ((changed & BSS_CHANGED_IBSS) && !bss_conf->ibss_creator &&
647		    bss_conf->enable_beacon) {
648			spin_lock_irqsave(&sc->sc_pm_lock, flags);
649			sc->ps_flags |= PS_BEACON_SYNC | PS_WAIT_FOR_BEACON;
650			spin_unlock_irqrestore(&sc->sc_pm_lock, flags);
651			skip_beacon = true;
652		} else {
653			ath9k_set_beacon(sc);
654		}
655
656		/*
657		 * Do not set the ATH_OP_BEACONS flag for IBSS joiner mode
658		 * here, it is done in ath9k_beacon_config_adhoc().
659		 */
660		if (cur_conf->enable_beacon && !skip_beacon)
661			set_bit(ATH_OP_BEACONS, &common->op_flags);
662		else
 
663			clear_bit(ATH_OP_BEACONS, &common->op_flags);
 
 
 
 
 
664	}
665}
666
667void ath9k_set_beacon(struct ath_softc *sc)
668{
669	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
670	struct ath_beacon_config *cur_conf = &sc->cur_chan->beacon;
671
672	switch (sc->sc_ah->opmode) {
673	case NL80211_IFTYPE_AP:
674	case NL80211_IFTYPE_MESH_POINT:
675		ath9k_beacon_config_ap(sc, cur_conf);
676		break;
677	case NL80211_IFTYPE_ADHOC:
678		ath9k_beacon_config_adhoc(sc, cur_conf);
679		break;
680	case NL80211_IFTYPE_STATION:
681		ath9k_beacon_config_sta(sc->sc_ah, cur_conf);
682		break;
683	default:
684		ath_dbg(common, CONFIG, "Unsupported beaconing mode\n");
685		return;
686	}
687}