Loading...
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * lm83.c - Part of lm_sensors, Linux kernel modules for hardware
4 * monitoring
5 * Copyright (C) 2003-2009 Jean Delvare <jdelvare@suse.de>
6 *
7 * Heavily inspired from the lm78, lm75 and adm1021 drivers. The LM83 is
8 * a sensor chip made by National Semiconductor. It reports up to four
9 * temperatures (its own plus up to three external ones) with a 1 deg
10 * resolution and a 3-4 deg accuracy. Complete datasheet can be obtained
11 * from National's website at:
12 * http://www.national.com/pf/LM/LM83.html
13 * Since the datasheet omits to give the chip stepping code, I give it
14 * here: 0x03 (at register 0xff).
15 *
16 * Also supports the LM82 temp sensor, which is basically a stripped down
17 * model of the LM83. Datasheet is here:
18 * http://www.national.com/pf/LM/LM82.html
19 */
20
21#include <linux/bits.h>
22#include <linux/err.h>
23#include <linux/i2c.h>
24#include <linux/init.h>
25#include <linux/hwmon.h>
26#include <linux/module.h>
27#include <linux/regmap.h>
28#include <linux/slab.h>
29
30/*
31 * Addresses to scan
32 * Address is selected using 2 three-level pins, resulting in 9 possible
33 * addresses.
34 */
35
36static const unsigned short normal_i2c[] = {
37 0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b, 0x4c, 0x4d, 0x4e, I2C_CLIENT_END };
38
39enum chips { lm83, lm82 };
40
41/*
42 * The LM83 registers
43 * Manufacturer ID is 0x01 for National Semiconductor.
44 */
45
46#define LM83_REG_R_MAN_ID 0xFE
47#define LM83_REG_R_CHIP_ID 0xFF
48#define LM83_REG_R_CONFIG 0x03
49#define LM83_REG_W_CONFIG 0x09
50#define LM83_REG_R_STATUS1 0x02
51#define LM83_REG_R_STATUS2 0x35
52#define LM83_REG_R_LOCAL_TEMP 0x00
53#define LM83_REG_R_LOCAL_HIGH 0x05
54#define LM83_REG_W_LOCAL_HIGH 0x0B
55#define LM83_REG_R_REMOTE1_TEMP 0x30
56#define LM83_REG_R_REMOTE1_HIGH 0x38
57#define LM83_REG_W_REMOTE1_HIGH 0x50
58#define LM83_REG_R_REMOTE2_TEMP 0x01
59#define LM83_REG_R_REMOTE2_HIGH 0x07
60#define LM83_REG_W_REMOTE2_HIGH 0x0D
61#define LM83_REG_R_REMOTE3_TEMP 0x31
62#define LM83_REG_R_REMOTE3_HIGH 0x3A
63#define LM83_REG_W_REMOTE3_HIGH 0x52
64#define LM83_REG_R_TCRIT 0x42
65#define LM83_REG_W_TCRIT 0x5A
66
67static const u8 LM83_REG_TEMP[] = {
68 LM83_REG_R_LOCAL_TEMP,
69 LM83_REG_R_REMOTE1_TEMP,
70 LM83_REG_R_REMOTE2_TEMP,
71 LM83_REG_R_REMOTE3_TEMP,
72};
73
74static const u8 LM83_REG_MAX[] = {
75 LM83_REG_R_LOCAL_HIGH,
76 LM83_REG_R_REMOTE1_HIGH,
77 LM83_REG_R_REMOTE2_HIGH,
78 LM83_REG_R_REMOTE3_HIGH,
79};
80
81/* alarm and fault registers and bits, indexed by channel */
82static const u8 LM83_ALARM_REG[] = {
83 LM83_REG_R_STATUS1, LM83_REG_R_STATUS2, LM83_REG_R_STATUS1, LM83_REG_R_STATUS2
84};
85
86static const u8 LM83_MAX_ALARM_BIT[] = {
87 BIT(6), BIT(7), BIT(4), BIT(4)
88};
89
90static const u8 LM83_CRIT_ALARM_BIT[] = {
91 BIT(0), BIT(0), BIT(1), BIT(1)
92};
93
94static const u8 LM83_FAULT_BIT[] = {
95 0, BIT(5), BIT(2), BIT(2)
96};
97
98/*
99 * Client data (each client gets its own)
100 */
101
102struct lm83_data {
103 struct regmap *regmap;
104 enum chips type;
105};
106
107/* regmap code */
108
109static int lm83_regmap_reg_read(void *context, unsigned int reg, unsigned int *val)
110{
111 struct i2c_client *client = context;
112 int ret;
113
114 ret = i2c_smbus_read_byte_data(client, reg);
115 if (ret < 0)
116 return ret;
117
118 *val = ret;
119 return 0;
120}
121
122/*
123 * The regmap write function maps read register addresses to write register
124 * addresses. This is necessary for regmap register caching to work.
125 * An alternative would be to clear the regmap cache whenever a register is
126 * written, but that would be much more expensive.
127 */
128static int lm83_regmap_reg_write(void *context, unsigned int reg, unsigned int val)
129{
130 struct i2c_client *client = context;
131
132 switch (reg) {
133 case LM83_REG_R_CONFIG:
134 case LM83_REG_R_LOCAL_HIGH:
135 case LM83_REG_R_REMOTE2_HIGH:
136 reg += 0x06;
137 break;
138 case LM83_REG_R_REMOTE1_HIGH:
139 case LM83_REG_R_REMOTE3_HIGH:
140 case LM83_REG_R_TCRIT:
141 reg += 0x18;
142 break;
143 default:
144 break;
145 }
146
147 return i2c_smbus_write_byte_data(client, reg, val);
148}
149
150static bool lm83_regmap_is_volatile(struct device *dev, unsigned int reg)
151{
152 switch (reg) {
153 case LM83_REG_R_LOCAL_TEMP:
154 case LM83_REG_R_REMOTE1_TEMP:
155 case LM83_REG_R_REMOTE2_TEMP:
156 case LM83_REG_R_REMOTE3_TEMP:
157 case LM83_REG_R_STATUS1:
158 case LM83_REG_R_STATUS2:
159 return true;
160 default:
161 return false;
162 }
163}
164
165static const struct regmap_config lm83_regmap_config = {
166 .reg_bits = 8,
167 .val_bits = 8,
168 .cache_type = REGCACHE_RBTREE,
169 .volatile_reg = lm83_regmap_is_volatile,
170 .reg_read = lm83_regmap_reg_read,
171 .reg_write = lm83_regmap_reg_write,
172};
173
174/* hwmon API */
175
176static int lm83_temp_read(struct device *dev, u32 attr, int channel, long *val)
177{
178 struct lm83_data *data = dev_get_drvdata(dev);
179 unsigned int regval;
180 int err;
181
182 switch (attr) {
183 case hwmon_temp_input:
184 err = regmap_read(data->regmap, LM83_REG_TEMP[channel], ®val);
185 if (err < 0)
186 return err;
187 *val = (s8)regval * 1000;
188 break;
189 case hwmon_temp_max:
190 err = regmap_read(data->regmap, LM83_REG_MAX[channel], ®val);
191 if (err < 0)
192 return err;
193 *val = (s8)regval * 1000;
194 break;
195 case hwmon_temp_crit:
196 err = regmap_read(data->regmap, LM83_REG_R_TCRIT, ®val);
197 if (err < 0)
198 return err;
199 *val = (s8)regval * 1000;
200 break;
201 case hwmon_temp_max_alarm:
202 err = regmap_read(data->regmap, LM83_ALARM_REG[channel], ®val);
203 if (err < 0)
204 return err;
205 *val = !!(regval & LM83_MAX_ALARM_BIT[channel]);
206 break;
207 case hwmon_temp_crit_alarm:
208 err = regmap_read(data->regmap, LM83_ALARM_REG[channel], ®val);
209 if (err < 0)
210 return err;
211 *val = !!(regval & LM83_CRIT_ALARM_BIT[channel]);
212 break;
213 case hwmon_temp_fault:
214 err = regmap_read(data->regmap, LM83_ALARM_REG[channel], ®val);
215 if (err < 0)
216 return err;
217 *val = !!(regval & LM83_FAULT_BIT[channel]);
218 break;
219 default:
220 return -EOPNOTSUPP;
221 }
222 return 0;
223}
224
225static int lm83_temp_write(struct device *dev, u32 attr, int channel, long val)
226{
227 struct lm83_data *data = dev_get_drvdata(dev);
228 unsigned int regval;
229 int err;
230
231 regval = DIV_ROUND_CLOSEST(clamp_val(val, -128000, 127000), 1000);
232
233 switch (attr) {
234 case hwmon_temp_max:
235 err = regmap_write(data->regmap, LM83_REG_MAX[channel], regval);
236 if (err < 0)
237 return err;
238 break;
239 case hwmon_temp_crit:
240 err = regmap_write(data->regmap, LM83_REG_R_TCRIT, regval);
241 if (err < 0)
242 return err;
243 break;
244 default:
245 return -EOPNOTSUPP;
246 }
247 return 0;
248}
249
250static int lm83_chip_read(struct device *dev, u32 attr, int channel, long *val)
251{
252 struct lm83_data *data = dev_get_drvdata(dev);
253 unsigned int regval;
254 int err;
255
256 switch (attr) {
257 case hwmon_chip_alarms:
258 err = regmap_read(data->regmap, LM83_REG_R_STATUS1, ®val);
259 if (err < 0)
260 return err;
261 *val = regval;
262 err = regmap_read(data->regmap, LM83_REG_R_STATUS2, ®val);
263 if (err < 0)
264 return err;
265 *val |= regval << 8;
266 return 0;
267 default:
268 return -EOPNOTSUPP;
269 }
270
271 return 0;
272}
273
274static int lm83_read(struct device *dev, enum hwmon_sensor_types type,
275 u32 attr, int channel, long *val)
276{
277 switch (type) {
278 case hwmon_chip:
279 return lm83_chip_read(dev, attr, channel, val);
280 case hwmon_temp:
281 return lm83_temp_read(dev, attr, channel, val);
282 default:
283 return -EOPNOTSUPP;
284 }
285}
286
287static int lm83_write(struct device *dev, enum hwmon_sensor_types type,
288 u32 attr, int channel, long val)
289{
290 switch (type) {
291 case hwmon_temp:
292 return lm83_temp_write(dev, attr, channel, val);
293 default:
294 return -EOPNOTSUPP;
295 }
296}
297
298static umode_t lm83_is_visible(const void *_data, enum hwmon_sensor_types type,
299 u32 attr, int channel)
300{
301 const struct lm83_data *data = _data;
302
303 /*
304 * LM82 only supports a single external channel, modeled as channel 2.
305 */
306 if (data->type == lm82 && (channel == 1 || channel == 3))
307 return 0;
308
309 switch (type) {
310 case hwmon_chip:
311 if (attr == hwmon_chip_alarms)
312 return 0444;
313 break;
314 case hwmon_temp:
315 switch (attr) {
316 case hwmon_temp_input:
317 case hwmon_temp_max_alarm:
318 case hwmon_temp_crit_alarm:
319 return 0444;
320 case hwmon_temp_fault:
321 if (channel)
322 return 0444;
323 break;
324 case hwmon_temp_max:
325 return 0644;
326 case hwmon_temp_crit:
327 if (channel == 2)
328 return 0644;
329 return 0444;
330 default:
331 break;
332 }
333 break;
334 default:
335 break;
336 }
337 return 0;
338}
339
340static const struct hwmon_channel_info * const lm83_info[] = {
341 HWMON_CHANNEL_INFO(chip, HWMON_C_ALARMS),
342 HWMON_CHANNEL_INFO(temp,
343 HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT |
344 HWMON_T_MAX_ALARM | HWMON_T_CRIT_ALARM,
345 HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT |
346 HWMON_T_MAX_ALARM | HWMON_T_CRIT_ALARM | HWMON_T_FAULT,
347 HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT |
348 HWMON_T_MAX_ALARM | HWMON_T_CRIT_ALARM | HWMON_T_FAULT,
349 HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT |
350 HWMON_T_MAX_ALARM | HWMON_T_CRIT_ALARM | HWMON_T_FAULT
351 ),
352 NULL
353};
354
355static const struct hwmon_ops lm83_hwmon_ops = {
356 .is_visible = lm83_is_visible,
357 .read = lm83_read,
358 .write = lm83_write,
359};
360
361static const struct hwmon_chip_info lm83_chip_info = {
362 .ops = &lm83_hwmon_ops,
363 .info = lm83_info,
364};
365
366/* Return 0 if detection is successful, -ENODEV otherwise */
367static int lm83_detect(struct i2c_client *client,
368 struct i2c_board_info *info)
369{
370 struct i2c_adapter *adapter = client->adapter;
371 const char *name;
372 u8 man_id, chip_id;
373
374 if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
375 return -ENODEV;
376
377 /* Detection */
378 if ((i2c_smbus_read_byte_data(client, LM83_REG_R_STATUS1) & 0xA8) ||
379 (i2c_smbus_read_byte_data(client, LM83_REG_R_STATUS2) & 0x48) ||
380 (i2c_smbus_read_byte_data(client, LM83_REG_R_CONFIG) & 0x41)) {
381 dev_dbg(&adapter->dev, "LM83 detection failed at 0x%02x\n",
382 client->addr);
383 return -ENODEV;
384 }
385
386 /* Identification */
387 man_id = i2c_smbus_read_byte_data(client, LM83_REG_R_MAN_ID);
388 if (man_id != 0x01) /* National Semiconductor */
389 return -ENODEV;
390
391 chip_id = i2c_smbus_read_byte_data(client, LM83_REG_R_CHIP_ID);
392 switch (chip_id) {
393 case 0x03:
394 /*
395 * According to the LM82 datasheet dated March 2013, recent
396 * revisions of LM82 have a die revision of 0x03. This was
397 * confirmed with a real chip. Further details in this revision
398 * of the LM82 datasheet strongly suggest that LM82 is just a
399 * repackaged LM83. It is therefore impossible to distinguish
400 * those chips from LM83, and they will be misdetected as LM83.
401 */
402 name = "lm83";
403 break;
404 case 0x01:
405 name = "lm82";
406 break;
407 default:
408 /* identification failed */
409 dev_dbg(&adapter->dev,
410 "Unsupported chip (man_id=0x%02X, chip_id=0x%02X)\n",
411 man_id, chip_id);
412 return -ENODEV;
413 }
414
415 strscpy(info->type, name, I2C_NAME_SIZE);
416
417 return 0;
418}
419
420static const struct i2c_device_id lm83_id[] = {
421 { "lm83", lm83 },
422 { "lm82", lm82 },
423 { }
424};
425MODULE_DEVICE_TABLE(i2c, lm83_id);
426
427static int lm83_probe(struct i2c_client *client)
428{
429 struct device *dev = &client->dev;
430 struct device *hwmon_dev;
431 struct lm83_data *data;
432
433 data = devm_kzalloc(dev, sizeof(struct lm83_data), GFP_KERNEL);
434 if (!data)
435 return -ENOMEM;
436
437 data->regmap = devm_regmap_init(dev, NULL, client, &lm83_regmap_config);
438 if (IS_ERR(data->regmap))
439 return PTR_ERR(data->regmap);
440
441 data->type = i2c_match_id(lm83_id, client)->driver_data;
442
443 hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name,
444 data, &lm83_chip_info, NULL);
445 return PTR_ERR_OR_ZERO(hwmon_dev);
446}
447
448/*
449 * Driver data (common to all clients)
450 */
451
452static struct i2c_driver lm83_driver = {
453 .class = I2C_CLASS_HWMON,
454 .driver = {
455 .name = "lm83",
456 },
457 .probe = lm83_probe,
458 .id_table = lm83_id,
459 .detect = lm83_detect,
460 .address_list = normal_i2c,
461};
462
463module_i2c_driver(lm83_driver);
464
465MODULE_AUTHOR("Jean Delvare <jdelvare@suse.de>");
466MODULE_DESCRIPTION("LM83 driver");
467MODULE_LICENSE("GPL");
1/*
2 * lm83.c - Part of lm_sensors, Linux kernel modules for hardware
3 * monitoring
4 * Copyright (C) 2003-2009 Jean Delvare <jdelvare@suse.de>
5 *
6 * Heavily inspired from the lm78, lm75 and adm1021 drivers. The LM83 is
7 * a sensor chip made by National Semiconductor. It reports up to four
8 * temperatures (its own plus up to three external ones) with a 1 deg
9 * resolution and a 3-4 deg accuracy. Complete datasheet can be obtained
10 * from National's website at:
11 * http://www.national.com/pf/LM/LM83.html
12 * Since the datasheet omits to give the chip stepping code, I give it
13 * here: 0x03 (at register 0xff).
14 *
15 * Also supports the LM82 temp sensor, which is basically a stripped down
16 * model of the LM83. Datasheet is here:
17 * http://www.national.com/pf/LM/LM82.html
18 *
19 * This program is free software; you can redistribute it and/or modify
20 * it under the terms of the GNU General Public License as published by
21 * the Free Software Foundation; either version 2 of the License, or
22 * (at your option) any later version.
23 *
24 * This program is distributed in the hope that it will be useful,
25 * but WITHOUT ANY WARRANTY; without even the implied warranty of
26 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
27 * GNU General Public License for more details.
28 */
29
30#include <linux/module.h>
31#include <linux/init.h>
32#include <linux/slab.h>
33#include <linux/jiffies.h>
34#include <linux/i2c.h>
35#include <linux/hwmon-sysfs.h>
36#include <linux/hwmon.h>
37#include <linux/err.h>
38#include <linux/mutex.h>
39#include <linux/sysfs.h>
40
41/*
42 * Addresses to scan
43 * Address is selected using 2 three-level pins, resulting in 9 possible
44 * addresses.
45 */
46
47static const unsigned short normal_i2c[] = {
48 0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b, 0x4c, 0x4d, 0x4e, I2C_CLIENT_END };
49
50enum chips { lm83, lm82 };
51
52/*
53 * The LM83 registers
54 * Manufacturer ID is 0x01 for National Semiconductor.
55 */
56
57#define LM83_REG_R_MAN_ID 0xFE
58#define LM83_REG_R_CHIP_ID 0xFF
59#define LM83_REG_R_CONFIG 0x03
60#define LM83_REG_W_CONFIG 0x09
61#define LM83_REG_R_STATUS1 0x02
62#define LM83_REG_R_STATUS2 0x35
63#define LM83_REG_R_LOCAL_TEMP 0x00
64#define LM83_REG_R_LOCAL_HIGH 0x05
65#define LM83_REG_W_LOCAL_HIGH 0x0B
66#define LM83_REG_R_REMOTE1_TEMP 0x30
67#define LM83_REG_R_REMOTE1_HIGH 0x38
68#define LM83_REG_W_REMOTE1_HIGH 0x50
69#define LM83_REG_R_REMOTE2_TEMP 0x01
70#define LM83_REG_R_REMOTE2_HIGH 0x07
71#define LM83_REG_W_REMOTE2_HIGH 0x0D
72#define LM83_REG_R_REMOTE3_TEMP 0x31
73#define LM83_REG_R_REMOTE3_HIGH 0x3A
74#define LM83_REG_W_REMOTE3_HIGH 0x52
75#define LM83_REG_R_TCRIT 0x42
76#define LM83_REG_W_TCRIT 0x5A
77
78/*
79 * Conversions and various macros
80 * The LM83 uses signed 8-bit values with LSB = 1 degree Celsius.
81 */
82
83#define TEMP_FROM_REG(val) ((val) * 1000)
84#define TEMP_TO_REG(val) ((val) <= -128000 ? -128 : \
85 (val) >= 127000 ? 127 : \
86 (val) < 0 ? ((val) - 500) / 1000 : \
87 ((val) + 500) / 1000)
88
89static const u8 LM83_REG_R_TEMP[] = {
90 LM83_REG_R_LOCAL_TEMP,
91 LM83_REG_R_REMOTE1_TEMP,
92 LM83_REG_R_REMOTE2_TEMP,
93 LM83_REG_R_REMOTE3_TEMP,
94 LM83_REG_R_LOCAL_HIGH,
95 LM83_REG_R_REMOTE1_HIGH,
96 LM83_REG_R_REMOTE2_HIGH,
97 LM83_REG_R_REMOTE3_HIGH,
98 LM83_REG_R_TCRIT,
99};
100
101static const u8 LM83_REG_W_HIGH[] = {
102 LM83_REG_W_LOCAL_HIGH,
103 LM83_REG_W_REMOTE1_HIGH,
104 LM83_REG_W_REMOTE2_HIGH,
105 LM83_REG_W_REMOTE3_HIGH,
106 LM83_REG_W_TCRIT,
107};
108
109/*
110 * Client data (each client gets its own)
111 */
112
113struct lm83_data {
114 struct i2c_client *client;
115 const struct attribute_group *groups[3];
116 struct mutex update_lock;
117 char valid; /* zero until following fields are valid */
118 unsigned long last_updated; /* in jiffies */
119
120 /* registers values */
121 s8 temp[9]; /* 0..3: input 1-4,
122 4..7: high limit 1-4,
123 8 : critical limit */
124 u16 alarms; /* bitvector, combined */
125};
126
127static struct lm83_data *lm83_update_device(struct device *dev)
128{
129 struct lm83_data *data = dev_get_drvdata(dev);
130 struct i2c_client *client = data->client;
131
132 mutex_lock(&data->update_lock);
133
134 if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) {
135 int nr;
136
137 dev_dbg(&client->dev, "Updating lm83 data.\n");
138 for (nr = 0; nr < 9; nr++) {
139 data->temp[nr] =
140 i2c_smbus_read_byte_data(client,
141 LM83_REG_R_TEMP[nr]);
142 }
143 data->alarms =
144 i2c_smbus_read_byte_data(client, LM83_REG_R_STATUS1)
145 + (i2c_smbus_read_byte_data(client, LM83_REG_R_STATUS2)
146 << 8);
147
148 data->last_updated = jiffies;
149 data->valid = 1;
150 }
151
152 mutex_unlock(&data->update_lock);
153
154 return data;
155}
156
157/*
158 * Sysfs stuff
159 */
160
161static ssize_t show_temp(struct device *dev, struct device_attribute *devattr,
162 char *buf)
163{
164 struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
165 struct lm83_data *data = lm83_update_device(dev);
166 return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[attr->index]));
167}
168
169static ssize_t set_temp(struct device *dev, struct device_attribute *devattr,
170 const char *buf, size_t count)
171{
172 struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
173 struct lm83_data *data = dev_get_drvdata(dev);
174 struct i2c_client *client = data->client;
175 long val;
176 int nr = attr->index;
177 int err;
178
179 err = kstrtol(buf, 10, &val);
180 if (err < 0)
181 return err;
182
183 mutex_lock(&data->update_lock);
184 data->temp[nr] = TEMP_TO_REG(val);
185 i2c_smbus_write_byte_data(client, LM83_REG_W_HIGH[nr - 4],
186 data->temp[nr]);
187 mutex_unlock(&data->update_lock);
188 return count;
189}
190
191static ssize_t show_alarms(struct device *dev, struct device_attribute *dummy,
192 char *buf)
193{
194 struct lm83_data *data = lm83_update_device(dev);
195 return sprintf(buf, "%d\n", data->alarms);
196}
197
198static ssize_t show_alarm(struct device *dev, struct device_attribute
199 *devattr, char *buf)
200{
201 struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
202 struct lm83_data *data = lm83_update_device(dev);
203 int bitnr = attr->index;
204
205 return sprintf(buf, "%d\n", (data->alarms >> bitnr) & 1);
206}
207
208static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0);
209static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1);
210static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_temp, NULL, 2);
211static SENSOR_DEVICE_ATTR(temp4_input, S_IRUGO, show_temp, NULL, 3);
212static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp,
213 set_temp, 4);
214static SENSOR_DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_temp,
215 set_temp, 5);
216static SENSOR_DEVICE_ATTR(temp3_max, S_IWUSR | S_IRUGO, show_temp,
217 set_temp, 6);
218static SENSOR_DEVICE_ATTR(temp4_max, S_IWUSR | S_IRUGO, show_temp,
219 set_temp, 7);
220static SENSOR_DEVICE_ATTR(temp1_crit, S_IRUGO, show_temp, NULL, 8);
221static SENSOR_DEVICE_ATTR(temp2_crit, S_IRUGO, show_temp, NULL, 8);
222static SENSOR_DEVICE_ATTR(temp3_crit, S_IWUSR | S_IRUGO, show_temp,
223 set_temp, 8);
224static SENSOR_DEVICE_ATTR(temp4_crit, S_IRUGO, show_temp, NULL, 8);
225
226/* Individual alarm files */
227static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, show_alarm, NULL, 0);
228static SENSOR_DEVICE_ATTR(temp3_crit_alarm, S_IRUGO, show_alarm, NULL, 1);
229static SENSOR_DEVICE_ATTR(temp3_fault, S_IRUGO, show_alarm, NULL, 2);
230static SENSOR_DEVICE_ATTR(temp3_max_alarm, S_IRUGO, show_alarm, NULL, 4);
231static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, show_alarm, NULL, 6);
232static SENSOR_DEVICE_ATTR(temp2_crit_alarm, S_IRUGO, show_alarm, NULL, 8);
233static SENSOR_DEVICE_ATTR(temp4_crit_alarm, S_IRUGO, show_alarm, NULL, 9);
234static SENSOR_DEVICE_ATTR(temp4_fault, S_IRUGO, show_alarm, NULL, 10);
235static SENSOR_DEVICE_ATTR(temp4_max_alarm, S_IRUGO, show_alarm, NULL, 12);
236static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO, show_alarm, NULL, 13);
237static SENSOR_DEVICE_ATTR(temp2_max_alarm, S_IRUGO, show_alarm, NULL, 15);
238/* Raw alarm file for compatibility */
239static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
240
241static struct attribute *lm83_attributes[] = {
242 &sensor_dev_attr_temp1_input.dev_attr.attr,
243 &sensor_dev_attr_temp3_input.dev_attr.attr,
244 &sensor_dev_attr_temp1_max.dev_attr.attr,
245 &sensor_dev_attr_temp3_max.dev_attr.attr,
246 &sensor_dev_attr_temp1_crit.dev_attr.attr,
247 &sensor_dev_attr_temp3_crit.dev_attr.attr,
248
249 &sensor_dev_attr_temp1_crit_alarm.dev_attr.attr,
250 &sensor_dev_attr_temp3_crit_alarm.dev_attr.attr,
251 &sensor_dev_attr_temp3_fault.dev_attr.attr,
252 &sensor_dev_attr_temp3_max_alarm.dev_attr.attr,
253 &sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
254 &dev_attr_alarms.attr,
255 NULL
256};
257
258static const struct attribute_group lm83_group = {
259 .attrs = lm83_attributes,
260};
261
262static struct attribute *lm83_attributes_opt[] = {
263 &sensor_dev_attr_temp2_input.dev_attr.attr,
264 &sensor_dev_attr_temp4_input.dev_attr.attr,
265 &sensor_dev_attr_temp2_max.dev_attr.attr,
266 &sensor_dev_attr_temp4_max.dev_attr.attr,
267 &sensor_dev_attr_temp2_crit.dev_attr.attr,
268 &sensor_dev_attr_temp4_crit.dev_attr.attr,
269
270 &sensor_dev_attr_temp2_crit_alarm.dev_attr.attr,
271 &sensor_dev_attr_temp4_crit_alarm.dev_attr.attr,
272 &sensor_dev_attr_temp4_fault.dev_attr.attr,
273 &sensor_dev_attr_temp4_max_alarm.dev_attr.attr,
274 &sensor_dev_attr_temp2_fault.dev_attr.attr,
275 &sensor_dev_attr_temp2_max_alarm.dev_attr.attr,
276 NULL
277};
278
279static const struct attribute_group lm83_group_opt = {
280 .attrs = lm83_attributes_opt,
281};
282
283/*
284 * Real code
285 */
286
287/* Return 0 if detection is successful, -ENODEV otherwise */
288static int lm83_detect(struct i2c_client *new_client,
289 struct i2c_board_info *info)
290{
291 struct i2c_adapter *adapter = new_client->adapter;
292 const char *name;
293 u8 man_id, chip_id;
294
295 if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
296 return -ENODEV;
297
298 /* Detection */
299 if ((i2c_smbus_read_byte_data(new_client, LM83_REG_R_STATUS1) & 0xA8) ||
300 (i2c_smbus_read_byte_data(new_client, LM83_REG_R_STATUS2) & 0x48) ||
301 (i2c_smbus_read_byte_data(new_client, LM83_REG_R_CONFIG) & 0x41)) {
302 dev_dbg(&adapter->dev, "LM83 detection failed at 0x%02x\n",
303 new_client->addr);
304 return -ENODEV;
305 }
306
307 /* Identification */
308 man_id = i2c_smbus_read_byte_data(new_client, LM83_REG_R_MAN_ID);
309 if (man_id != 0x01) /* National Semiconductor */
310 return -ENODEV;
311
312 chip_id = i2c_smbus_read_byte_data(new_client, LM83_REG_R_CHIP_ID);
313 switch (chip_id) {
314 case 0x03:
315 name = "lm83";
316 break;
317 case 0x01:
318 name = "lm82";
319 break;
320 default:
321 /* identification failed */
322 dev_info(&adapter->dev,
323 "Unsupported chip (man_id=0x%02X, chip_id=0x%02X)\n",
324 man_id, chip_id);
325 return -ENODEV;
326 }
327
328 strlcpy(info->type, name, I2C_NAME_SIZE);
329
330 return 0;
331}
332
333static int lm83_probe(struct i2c_client *new_client,
334 const struct i2c_device_id *id)
335{
336 struct device *hwmon_dev;
337 struct lm83_data *data;
338
339 data = devm_kzalloc(&new_client->dev, sizeof(struct lm83_data),
340 GFP_KERNEL);
341 if (!data)
342 return -ENOMEM;
343
344 data->client = new_client;
345 mutex_init(&data->update_lock);
346
347 /*
348 * Register sysfs hooks
349 * The LM82 can only monitor one external diode which is
350 * at the same register as the LM83 temp3 entry - so we
351 * declare 1 and 3 common, and then 2 and 4 only for the LM83.
352 */
353 data->groups[0] = &lm83_group;
354 if (id->driver_data == lm83)
355 data->groups[1] = &lm83_group_opt;
356
357 hwmon_dev = devm_hwmon_device_register_with_groups(&new_client->dev,
358 new_client->name,
359 data, data->groups);
360 return PTR_ERR_OR_ZERO(hwmon_dev);
361}
362
363/*
364 * Driver data (common to all clients)
365 */
366
367static const struct i2c_device_id lm83_id[] = {
368 { "lm83", lm83 },
369 { "lm82", lm82 },
370 { }
371};
372MODULE_DEVICE_TABLE(i2c, lm83_id);
373
374static struct i2c_driver lm83_driver = {
375 .class = I2C_CLASS_HWMON,
376 .driver = {
377 .name = "lm83",
378 },
379 .probe = lm83_probe,
380 .id_table = lm83_id,
381 .detect = lm83_detect,
382 .address_list = normal_i2c,
383};
384
385module_i2c_driver(lm83_driver);
386
387MODULE_AUTHOR("Jean Delvare <jdelvare@suse.de>");
388MODULE_DESCRIPTION("LM83 driver");
389MODULE_LICENSE("GPL");