Loading...
1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * REINER SCT cyberJack pinpad/e-com USB Chipcard Reader Driver
4 *
5 * Copyright (C) 2001 REINER SCT
6 * Author: Matthias Bruestle
7 *
8 * Contact: support@reiner-sct.com (see MAINTAINERS)
9 *
10 * This program is largely derived from work by the linux-usb group
11 * and associated source files. Please see the usb/serial files for
12 * individual credits and copyrights.
13 *
14 * Thanks to Greg Kroah-Hartman (greg@kroah.com) for his help and
15 * patience.
16 *
17 * In case of problems, please write to the contact e-mail address
18 * mentioned above.
19 *
20 * Please note that later models of the cyberjack reader family are
21 * supported by a libusb-based userspace device driver.
22 *
23 * Homepage: http://www.reiner-sct.de/support/treiber_cyberjack.php#linux
24 */
25
26
27#include <linux/kernel.h>
28#include <linux/errno.h>
29#include <linux/slab.h>
30#include <linux/tty.h>
31#include <linux/tty_driver.h>
32#include <linux/tty_flip.h>
33#include <linux/module.h>
34#include <linux/spinlock.h>
35#include <linux/uaccess.h>
36#include <linux/usb.h>
37#include <linux/usb/serial.h>
38
39#define CYBERJACK_LOCAL_BUF_SIZE 32
40
41#define DRIVER_AUTHOR "Matthias Bruestle"
42#define DRIVER_DESC "REINER SCT cyberJack pinpad/e-com USB Chipcard Reader Driver"
43
44
45#define CYBERJACK_VENDOR_ID 0x0C4B
46#define CYBERJACK_PRODUCT_ID 0x0100
47
48/* Function prototypes */
49static int cyberjack_port_probe(struct usb_serial_port *port);
50static void cyberjack_port_remove(struct usb_serial_port *port);
51static int cyberjack_open(struct tty_struct *tty,
52 struct usb_serial_port *port);
53static void cyberjack_close(struct usb_serial_port *port);
54static int cyberjack_write(struct tty_struct *tty,
55 struct usb_serial_port *port, const unsigned char *buf, int count);
56static unsigned int cyberjack_write_room(struct tty_struct *tty);
57static void cyberjack_read_int_callback(struct urb *urb);
58static void cyberjack_read_bulk_callback(struct urb *urb);
59static void cyberjack_write_bulk_callback(struct urb *urb);
60
61static const struct usb_device_id id_table[] = {
62 { USB_DEVICE(CYBERJACK_VENDOR_ID, CYBERJACK_PRODUCT_ID) },
63 { } /* Terminating entry */
64};
65
66MODULE_DEVICE_TABLE(usb, id_table);
67
68static struct usb_serial_driver cyberjack_device = {
69 .driver = {
70 .owner = THIS_MODULE,
71 .name = "cyberjack",
72 },
73 .description = "Reiner SCT Cyberjack USB card reader",
74 .id_table = id_table,
75 .num_ports = 1,
76 .num_bulk_out = 1,
77 .port_probe = cyberjack_port_probe,
78 .port_remove = cyberjack_port_remove,
79 .open = cyberjack_open,
80 .close = cyberjack_close,
81 .write = cyberjack_write,
82 .write_room = cyberjack_write_room,
83 .read_int_callback = cyberjack_read_int_callback,
84 .read_bulk_callback = cyberjack_read_bulk_callback,
85 .write_bulk_callback = cyberjack_write_bulk_callback,
86};
87
88static struct usb_serial_driver * const serial_drivers[] = {
89 &cyberjack_device, NULL
90};
91
92struct cyberjack_private {
93 spinlock_t lock; /* Lock for SMP */
94 short rdtodo; /* Bytes still to read */
95 unsigned char wrbuf[5*64]; /* Buffer for collecting data to write */
96 short wrfilled; /* Overall data size we already got */
97 short wrsent; /* Data already sent */
98};
99
100static int cyberjack_port_probe(struct usb_serial_port *port)
101{
102 struct cyberjack_private *priv;
103 int result;
104
105 priv = kmalloc(sizeof(struct cyberjack_private), GFP_KERNEL);
106 if (!priv)
107 return -ENOMEM;
108
109 spin_lock_init(&priv->lock);
110 priv->rdtodo = 0;
111 priv->wrfilled = 0;
112 priv->wrsent = 0;
113
114 usb_set_serial_port_data(port, priv);
115
116 result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
117 if (result)
118 dev_err(&port->dev, "usb_submit_urb(read int) failed\n");
119
120 return 0;
121}
122
123static void cyberjack_port_remove(struct usb_serial_port *port)
124{
125 struct cyberjack_private *priv;
126
127 usb_kill_urb(port->interrupt_in_urb);
128
129 priv = usb_get_serial_port_data(port);
130 kfree(priv);
131}
132
133static int cyberjack_open(struct tty_struct *tty,
134 struct usb_serial_port *port)
135{
136 struct cyberjack_private *priv;
137 unsigned long flags;
138
139 dev_dbg(&port->dev, "%s - usb_clear_halt\n", __func__);
140 usb_clear_halt(port->serial->dev, port->write_urb->pipe);
141
142 priv = usb_get_serial_port_data(port);
143 spin_lock_irqsave(&priv->lock, flags);
144 priv->rdtodo = 0;
145 priv->wrfilled = 0;
146 priv->wrsent = 0;
147 spin_unlock_irqrestore(&priv->lock, flags);
148
149 return 0;
150}
151
152static void cyberjack_close(struct usb_serial_port *port)
153{
154 usb_kill_urb(port->write_urb);
155 usb_kill_urb(port->read_urb);
156}
157
158static int cyberjack_write(struct tty_struct *tty,
159 struct usb_serial_port *port, const unsigned char *buf, int count)
160{
161 struct device *dev = &port->dev;
162 struct cyberjack_private *priv = usb_get_serial_port_data(port);
163 unsigned long flags;
164 int result;
165 int wrexpected;
166
167 if (count == 0) {
168 dev_dbg(dev, "%s - write request of 0 bytes\n", __func__);
169 return 0;
170 }
171
172 if (!test_and_clear_bit(0, &port->write_urbs_free)) {
173 dev_dbg(dev, "%s - already writing\n", __func__);
174 return 0;
175 }
176
177 spin_lock_irqsave(&priv->lock, flags);
178
179 if (count+priv->wrfilled > sizeof(priv->wrbuf)) {
180 /* To much data for buffer. Reset buffer. */
181 priv->wrfilled = 0;
182 spin_unlock_irqrestore(&priv->lock, flags);
183 set_bit(0, &port->write_urbs_free);
184 return 0;
185 }
186
187 /* Copy data */
188 memcpy(priv->wrbuf + priv->wrfilled, buf, count);
189
190 usb_serial_debug_data(dev, __func__, count, priv->wrbuf + priv->wrfilled);
191 priv->wrfilled += count;
192
193 if (priv->wrfilled >= 3) {
194 wrexpected = ((int)priv->wrbuf[2]<<8)+priv->wrbuf[1]+3;
195 dev_dbg(dev, "%s - expected data: %d\n", __func__, wrexpected);
196 } else
197 wrexpected = sizeof(priv->wrbuf);
198
199 if (priv->wrfilled >= wrexpected) {
200 /* We have enough data to begin transmission */
201 int length;
202
203 dev_dbg(dev, "%s - transmitting data (frame 1)\n", __func__);
204 length = (wrexpected > port->bulk_out_size) ?
205 port->bulk_out_size : wrexpected;
206
207 memcpy(port->write_urb->transfer_buffer, priv->wrbuf, length);
208 priv->wrsent = length;
209
210 /* set up our urb */
211 port->write_urb->transfer_buffer_length = length;
212
213 /* send the data out the bulk port */
214 result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
215 if (result) {
216 dev_err(&port->dev,
217 "%s - failed submitting write urb, error %d\n",
218 __func__, result);
219 /* Throw away data. No better idea what to do with it. */
220 priv->wrfilled = 0;
221 priv->wrsent = 0;
222 spin_unlock_irqrestore(&priv->lock, flags);
223 set_bit(0, &port->write_urbs_free);
224 return 0;
225 }
226
227 dev_dbg(dev, "%s - priv->wrsent=%d\n", __func__, priv->wrsent);
228 dev_dbg(dev, "%s - priv->wrfilled=%d\n", __func__, priv->wrfilled);
229
230 if (priv->wrsent >= priv->wrfilled) {
231 dev_dbg(dev, "%s - buffer cleaned\n", __func__);
232 memset(priv->wrbuf, 0, sizeof(priv->wrbuf));
233 priv->wrfilled = 0;
234 priv->wrsent = 0;
235 }
236 }
237
238 spin_unlock_irqrestore(&priv->lock, flags);
239
240 return count;
241}
242
243static unsigned int cyberjack_write_room(struct tty_struct *tty)
244{
245 /* FIXME: .... */
246 return CYBERJACK_LOCAL_BUF_SIZE;
247}
248
249static void cyberjack_read_int_callback(struct urb *urb)
250{
251 struct usb_serial_port *port = urb->context;
252 struct cyberjack_private *priv = usb_get_serial_port_data(port);
253 struct device *dev = &port->dev;
254 unsigned char *data = urb->transfer_buffer;
255 int status = urb->status;
256 unsigned long flags;
257 int result;
258
259 /* the urb might have been killed. */
260 if (status)
261 return;
262
263 usb_serial_debug_data(dev, __func__, urb->actual_length, data);
264
265 /* React only to interrupts signaling a bulk_in transfer */
266 if (urb->actual_length == 4 && data[0] == 0x01) {
267 short old_rdtodo;
268
269 /* This is a announcement of coming bulk_ins. */
270 unsigned short size = ((unsigned short)data[3]<<8)+data[2]+3;
271
272 spin_lock_irqsave(&priv->lock, flags);
273
274 old_rdtodo = priv->rdtodo;
275
276 if (old_rdtodo > SHRT_MAX - size) {
277 dev_dbg(dev, "Too many bulk_in urbs to do.\n");
278 spin_unlock_irqrestore(&priv->lock, flags);
279 goto resubmit;
280 }
281
282 /* "+=" is probably more fault tolerant than "=" */
283 priv->rdtodo += size;
284
285 dev_dbg(dev, "%s - rdtodo: %d\n", __func__, priv->rdtodo);
286
287 spin_unlock_irqrestore(&priv->lock, flags);
288
289 if (!old_rdtodo) {
290 result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
291 if (result)
292 dev_err(dev, "%s - failed resubmitting read urb, error %d\n",
293 __func__, result);
294 dev_dbg(dev, "%s - usb_submit_urb(read urb)\n", __func__);
295 }
296 }
297
298resubmit:
299 result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
300 if (result)
301 dev_err(&port->dev, "usb_submit_urb(read int) failed\n");
302 dev_dbg(dev, "%s - usb_submit_urb(int urb)\n", __func__);
303}
304
305static void cyberjack_read_bulk_callback(struct urb *urb)
306{
307 struct usb_serial_port *port = urb->context;
308 struct cyberjack_private *priv = usb_get_serial_port_data(port);
309 struct device *dev = &port->dev;
310 unsigned char *data = urb->transfer_buffer;
311 unsigned long flags;
312 short todo;
313 int result;
314 int status = urb->status;
315
316 usb_serial_debug_data(dev, __func__, urb->actual_length, data);
317 if (status) {
318 dev_dbg(dev, "%s - nonzero read bulk status received: %d\n",
319 __func__, status);
320 return;
321 }
322
323 if (urb->actual_length) {
324 tty_insert_flip_string(&port->port, data, urb->actual_length);
325 tty_flip_buffer_push(&port->port);
326 }
327
328 spin_lock_irqsave(&priv->lock, flags);
329
330 /* Reduce urbs to do by one. */
331 priv->rdtodo -= urb->actual_length;
332 /* Just to be sure */
333 if (priv->rdtodo < 0)
334 priv->rdtodo = 0;
335 todo = priv->rdtodo;
336
337 spin_unlock_irqrestore(&priv->lock, flags);
338
339 dev_dbg(dev, "%s - rdtodo: %d\n", __func__, todo);
340
341 /* Continue to read if we have still urbs to do. */
342 if (todo /* || (urb->actual_length==port->bulk_in_endpointAddress)*/) {
343 result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
344 if (result)
345 dev_err(dev, "%s - failed resubmitting read urb, error %d\n",
346 __func__, result);
347 dev_dbg(dev, "%s - usb_submit_urb(read urb)\n", __func__);
348 }
349}
350
351static void cyberjack_write_bulk_callback(struct urb *urb)
352{
353 struct usb_serial_port *port = urb->context;
354 struct cyberjack_private *priv = usb_get_serial_port_data(port);
355 struct device *dev = &port->dev;
356 int status = urb->status;
357 unsigned long flags;
358 bool resubmitted = false;
359
360 if (status) {
361 dev_dbg(dev, "%s - nonzero write bulk status received: %d\n",
362 __func__, status);
363 set_bit(0, &port->write_urbs_free);
364 return;
365 }
366
367 spin_lock_irqsave(&priv->lock, flags);
368
369 /* only do something if we have more data to send */
370 if (priv->wrfilled) {
371 int length, blksize, result;
372
373 dev_dbg(dev, "%s - transmitting data (frame n)\n", __func__);
374
375 length = ((priv->wrfilled - priv->wrsent) > port->bulk_out_size) ?
376 port->bulk_out_size : (priv->wrfilled - priv->wrsent);
377
378 memcpy(port->write_urb->transfer_buffer,
379 priv->wrbuf + priv->wrsent, length);
380 priv->wrsent += length;
381
382 /* set up our urb */
383 port->write_urb->transfer_buffer_length = length;
384
385 /* send the data out the bulk port */
386 result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
387 if (result) {
388 dev_err(dev, "%s - failed submitting write urb, error %d\n",
389 __func__, result);
390 /* Throw away data. No better idea what to do with it. */
391 priv->wrfilled = 0;
392 priv->wrsent = 0;
393 goto exit;
394 }
395
396 resubmitted = true;
397
398 dev_dbg(dev, "%s - priv->wrsent=%d\n", __func__, priv->wrsent);
399 dev_dbg(dev, "%s - priv->wrfilled=%d\n", __func__, priv->wrfilled);
400
401 blksize = ((int)priv->wrbuf[2]<<8)+priv->wrbuf[1]+3;
402
403 if (priv->wrsent >= priv->wrfilled ||
404 priv->wrsent >= blksize) {
405 dev_dbg(dev, "%s - buffer cleaned\n", __func__);
406 memset(priv->wrbuf, 0, sizeof(priv->wrbuf));
407 priv->wrfilled = 0;
408 priv->wrsent = 0;
409 }
410 }
411
412exit:
413 spin_unlock_irqrestore(&priv->lock, flags);
414 if (!resubmitted)
415 set_bit(0, &port->write_urbs_free);
416 usb_serial_port_softint(port);
417}
418
419module_usb_serial_driver(serial_drivers, id_table);
420
421MODULE_AUTHOR(DRIVER_AUTHOR);
422MODULE_DESCRIPTION(DRIVER_DESC);
423MODULE_LICENSE("GPL");
1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * REINER SCT cyberJack pinpad/e-com USB Chipcard Reader Driver
4 *
5 * Copyright (C) 2001 REINER SCT
6 * Author: Matthias Bruestle
7 *
8 * Contact: support@reiner-sct.com (see MAINTAINERS)
9 *
10 * This program is largely derived from work by the linux-usb group
11 * and associated source files. Please see the usb/serial files for
12 * individual credits and copyrights.
13 *
14 * Thanks to Greg Kroah-Hartman (greg@kroah.com) for his help and
15 * patience.
16 *
17 * In case of problems, please write to the contact e-mail address
18 * mentioned above.
19 *
20 * Please note that later models of the cyberjack reader family are
21 * supported by a libusb-based userspace device driver.
22 *
23 * Homepage: http://www.reiner-sct.de/support/treiber_cyberjack.php#linux
24 */
25
26
27#include <linux/kernel.h>
28#include <linux/errno.h>
29#include <linux/slab.h>
30#include <linux/tty.h>
31#include <linux/tty_driver.h>
32#include <linux/tty_flip.h>
33#include <linux/module.h>
34#include <linux/spinlock.h>
35#include <linux/uaccess.h>
36#include <linux/usb.h>
37#include <linux/usb/serial.h>
38
39#define CYBERJACK_LOCAL_BUF_SIZE 32
40
41#define DRIVER_AUTHOR "Matthias Bruestle"
42#define DRIVER_DESC "REINER SCT cyberJack pinpad/e-com USB Chipcard Reader Driver"
43
44
45#define CYBERJACK_VENDOR_ID 0x0C4B
46#define CYBERJACK_PRODUCT_ID 0x0100
47
48/* Function prototypes */
49static int cyberjack_port_probe(struct usb_serial_port *port);
50static int cyberjack_port_remove(struct usb_serial_port *port);
51static int cyberjack_open(struct tty_struct *tty,
52 struct usb_serial_port *port);
53static void cyberjack_close(struct usb_serial_port *port);
54static int cyberjack_write(struct tty_struct *tty,
55 struct usb_serial_port *port, const unsigned char *buf, int count);
56static int cyberjack_write_room(struct tty_struct *tty);
57static void cyberjack_read_int_callback(struct urb *urb);
58static void cyberjack_read_bulk_callback(struct urb *urb);
59static void cyberjack_write_bulk_callback(struct urb *urb);
60
61static const struct usb_device_id id_table[] = {
62 { USB_DEVICE(CYBERJACK_VENDOR_ID, CYBERJACK_PRODUCT_ID) },
63 { } /* Terminating entry */
64};
65
66MODULE_DEVICE_TABLE(usb, id_table);
67
68static struct usb_serial_driver cyberjack_device = {
69 .driver = {
70 .owner = THIS_MODULE,
71 .name = "cyberjack",
72 },
73 .description = "Reiner SCT Cyberjack USB card reader",
74 .id_table = id_table,
75 .num_ports = 1,
76 .num_bulk_out = 1,
77 .port_probe = cyberjack_port_probe,
78 .port_remove = cyberjack_port_remove,
79 .open = cyberjack_open,
80 .close = cyberjack_close,
81 .write = cyberjack_write,
82 .write_room = cyberjack_write_room,
83 .read_int_callback = cyberjack_read_int_callback,
84 .read_bulk_callback = cyberjack_read_bulk_callback,
85 .write_bulk_callback = cyberjack_write_bulk_callback,
86};
87
88static struct usb_serial_driver * const serial_drivers[] = {
89 &cyberjack_device, NULL
90};
91
92struct cyberjack_private {
93 spinlock_t lock; /* Lock for SMP */
94 short rdtodo; /* Bytes still to read */
95 unsigned char wrbuf[5*64]; /* Buffer for collecting data to write */
96 short wrfilled; /* Overall data size we already got */
97 short wrsent; /* Data already sent */
98};
99
100static int cyberjack_port_probe(struct usb_serial_port *port)
101{
102 struct cyberjack_private *priv;
103 int result;
104
105 priv = kmalloc(sizeof(struct cyberjack_private), GFP_KERNEL);
106 if (!priv)
107 return -ENOMEM;
108
109 spin_lock_init(&priv->lock);
110 priv->rdtodo = 0;
111 priv->wrfilled = 0;
112 priv->wrsent = 0;
113
114 usb_set_serial_port_data(port, priv);
115
116 result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
117 if (result)
118 dev_err(&port->dev, "usb_submit_urb(read int) failed\n");
119
120 return 0;
121}
122
123static int cyberjack_port_remove(struct usb_serial_port *port)
124{
125 struct cyberjack_private *priv;
126
127 usb_kill_urb(port->interrupt_in_urb);
128
129 priv = usb_get_serial_port_data(port);
130 kfree(priv);
131
132 return 0;
133}
134
135static int cyberjack_open(struct tty_struct *tty,
136 struct usb_serial_port *port)
137{
138 struct cyberjack_private *priv;
139 unsigned long flags;
140
141 dev_dbg(&port->dev, "%s - usb_clear_halt\n", __func__);
142 usb_clear_halt(port->serial->dev, port->write_urb->pipe);
143
144 priv = usb_get_serial_port_data(port);
145 spin_lock_irqsave(&priv->lock, flags);
146 priv->rdtodo = 0;
147 priv->wrfilled = 0;
148 priv->wrsent = 0;
149 spin_unlock_irqrestore(&priv->lock, flags);
150
151 return 0;
152}
153
154static void cyberjack_close(struct usb_serial_port *port)
155{
156 usb_kill_urb(port->write_urb);
157 usb_kill_urb(port->read_urb);
158}
159
160static int cyberjack_write(struct tty_struct *tty,
161 struct usb_serial_port *port, const unsigned char *buf, int count)
162{
163 struct device *dev = &port->dev;
164 struct cyberjack_private *priv = usb_get_serial_port_data(port);
165 unsigned long flags;
166 int result;
167 int wrexpected;
168
169 if (count == 0) {
170 dev_dbg(dev, "%s - write request of 0 bytes\n", __func__);
171 return 0;
172 }
173
174 if (!test_and_clear_bit(0, &port->write_urbs_free)) {
175 dev_dbg(dev, "%s - already writing\n", __func__);
176 return 0;
177 }
178
179 spin_lock_irqsave(&priv->lock, flags);
180
181 if (count+priv->wrfilled > sizeof(priv->wrbuf)) {
182 /* To much data for buffer. Reset buffer. */
183 priv->wrfilled = 0;
184 spin_unlock_irqrestore(&priv->lock, flags);
185 set_bit(0, &port->write_urbs_free);
186 return 0;
187 }
188
189 /* Copy data */
190 memcpy(priv->wrbuf + priv->wrfilled, buf, count);
191
192 usb_serial_debug_data(dev, __func__, count, priv->wrbuf + priv->wrfilled);
193 priv->wrfilled += count;
194
195 if (priv->wrfilled >= 3) {
196 wrexpected = ((int)priv->wrbuf[2]<<8)+priv->wrbuf[1]+3;
197 dev_dbg(dev, "%s - expected data: %d\n", __func__, wrexpected);
198 } else
199 wrexpected = sizeof(priv->wrbuf);
200
201 if (priv->wrfilled >= wrexpected) {
202 /* We have enough data to begin transmission */
203 int length;
204
205 dev_dbg(dev, "%s - transmitting data (frame 1)\n", __func__);
206 length = (wrexpected > port->bulk_out_size) ?
207 port->bulk_out_size : wrexpected;
208
209 memcpy(port->write_urb->transfer_buffer, priv->wrbuf, length);
210 priv->wrsent = length;
211
212 /* set up our urb */
213 port->write_urb->transfer_buffer_length = length;
214
215 /* send the data out the bulk port */
216 result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
217 if (result) {
218 dev_err(&port->dev,
219 "%s - failed submitting write urb, error %d\n",
220 __func__, result);
221 /* Throw away data. No better idea what to do with it. */
222 priv->wrfilled = 0;
223 priv->wrsent = 0;
224 spin_unlock_irqrestore(&priv->lock, flags);
225 set_bit(0, &port->write_urbs_free);
226 return 0;
227 }
228
229 dev_dbg(dev, "%s - priv->wrsent=%d\n", __func__, priv->wrsent);
230 dev_dbg(dev, "%s - priv->wrfilled=%d\n", __func__, priv->wrfilled);
231
232 if (priv->wrsent >= priv->wrfilled) {
233 dev_dbg(dev, "%s - buffer cleaned\n", __func__);
234 memset(priv->wrbuf, 0, sizeof(priv->wrbuf));
235 priv->wrfilled = 0;
236 priv->wrsent = 0;
237 }
238 }
239
240 spin_unlock_irqrestore(&priv->lock, flags);
241
242 return count;
243}
244
245static int cyberjack_write_room(struct tty_struct *tty)
246{
247 /* FIXME: .... */
248 return CYBERJACK_LOCAL_BUF_SIZE;
249}
250
251static void cyberjack_read_int_callback(struct urb *urb)
252{
253 struct usb_serial_port *port = urb->context;
254 struct cyberjack_private *priv = usb_get_serial_port_data(port);
255 struct device *dev = &port->dev;
256 unsigned char *data = urb->transfer_buffer;
257 int status = urb->status;
258 int result;
259
260 /* the urb might have been killed. */
261 if (status)
262 return;
263
264 usb_serial_debug_data(dev, __func__, urb->actual_length, data);
265
266 /* React only to interrupts signaling a bulk_in transfer */
267 if (urb->actual_length == 4 && data[0] == 0x01) {
268 short old_rdtodo;
269
270 /* This is a announcement of coming bulk_ins. */
271 unsigned short size = ((unsigned short)data[3]<<8)+data[2]+3;
272
273 spin_lock(&priv->lock);
274
275 old_rdtodo = priv->rdtodo;
276
277 if (old_rdtodo > SHRT_MAX - size) {
278 dev_dbg(dev, "To many bulk_in urbs to do.\n");
279 spin_unlock(&priv->lock);
280 goto resubmit;
281 }
282
283 /* "+=" is probably more fault tolerant than "=" */
284 priv->rdtodo += size;
285
286 dev_dbg(dev, "%s - rdtodo: %d\n", __func__, priv->rdtodo);
287
288 spin_unlock(&priv->lock);
289
290 if (!old_rdtodo) {
291 result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
292 if (result)
293 dev_err(dev, "%s - failed resubmitting read urb, error %d\n",
294 __func__, result);
295 dev_dbg(dev, "%s - usb_submit_urb(read urb)\n", __func__);
296 }
297 }
298
299resubmit:
300 result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
301 if (result)
302 dev_err(&port->dev, "usb_submit_urb(read int) failed\n");
303 dev_dbg(dev, "%s - usb_submit_urb(int urb)\n", __func__);
304}
305
306static void cyberjack_read_bulk_callback(struct urb *urb)
307{
308 struct usb_serial_port *port = urb->context;
309 struct cyberjack_private *priv = usb_get_serial_port_data(port);
310 struct device *dev = &port->dev;
311 unsigned char *data = urb->transfer_buffer;
312 short todo;
313 int result;
314 int status = urb->status;
315
316 usb_serial_debug_data(dev, __func__, urb->actual_length, data);
317 if (status) {
318 dev_dbg(dev, "%s - nonzero read bulk status received: %d\n",
319 __func__, status);
320 return;
321 }
322
323 if (urb->actual_length) {
324 tty_insert_flip_string(&port->port, data, urb->actual_length);
325 tty_flip_buffer_push(&port->port);
326 }
327
328 spin_lock(&priv->lock);
329
330 /* Reduce urbs to do by one. */
331 priv->rdtodo -= urb->actual_length;
332 /* Just to be sure */
333 if (priv->rdtodo < 0)
334 priv->rdtodo = 0;
335 todo = priv->rdtodo;
336
337 spin_unlock(&priv->lock);
338
339 dev_dbg(dev, "%s - rdtodo: %d\n", __func__, todo);
340
341 /* Continue to read if we have still urbs to do. */
342 if (todo /* || (urb->actual_length==port->bulk_in_endpointAddress)*/) {
343 result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
344 if (result)
345 dev_err(dev, "%s - failed resubmitting read urb, error %d\n",
346 __func__, result);
347 dev_dbg(dev, "%s - usb_submit_urb(read urb)\n", __func__);
348 }
349}
350
351static void cyberjack_write_bulk_callback(struct urb *urb)
352{
353 struct usb_serial_port *port = urb->context;
354 struct cyberjack_private *priv = usb_get_serial_port_data(port);
355 struct device *dev = &port->dev;
356 int status = urb->status;
357
358 set_bit(0, &port->write_urbs_free);
359 if (status) {
360 dev_dbg(dev, "%s - nonzero write bulk status received: %d\n",
361 __func__, status);
362 return;
363 }
364
365 spin_lock(&priv->lock);
366
367 /* only do something if we have more data to send */
368 if (priv->wrfilled) {
369 int length, blksize, result;
370
371 dev_dbg(dev, "%s - transmitting data (frame n)\n", __func__);
372
373 length = ((priv->wrfilled - priv->wrsent) > port->bulk_out_size) ?
374 port->bulk_out_size : (priv->wrfilled - priv->wrsent);
375
376 memcpy(port->write_urb->transfer_buffer,
377 priv->wrbuf + priv->wrsent, length);
378 priv->wrsent += length;
379
380 /* set up our urb */
381 port->write_urb->transfer_buffer_length = length;
382
383 /* send the data out the bulk port */
384 result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
385 if (result) {
386 dev_err(dev, "%s - failed submitting write urb, error %d\n",
387 __func__, result);
388 /* Throw away data. No better idea what to do with it. */
389 priv->wrfilled = 0;
390 priv->wrsent = 0;
391 goto exit;
392 }
393
394 dev_dbg(dev, "%s - priv->wrsent=%d\n", __func__, priv->wrsent);
395 dev_dbg(dev, "%s - priv->wrfilled=%d\n", __func__, priv->wrfilled);
396
397 blksize = ((int)priv->wrbuf[2]<<8)+priv->wrbuf[1]+3;
398
399 if (priv->wrsent >= priv->wrfilled ||
400 priv->wrsent >= blksize) {
401 dev_dbg(dev, "%s - buffer cleaned\n", __func__);
402 memset(priv->wrbuf, 0, sizeof(priv->wrbuf));
403 priv->wrfilled = 0;
404 priv->wrsent = 0;
405 }
406 }
407
408exit:
409 spin_unlock(&priv->lock);
410 usb_serial_port_softint(port);
411}
412
413module_usb_serial_driver(serial_drivers, id_table);
414
415MODULE_AUTHOR(DRIVER_AUTHOR);
416MODULE_DESCRIPTION(DRIVER_DESC);
417MODULE_LICENSE("GPL");