Loading...
Note: File does not exist in v6.8.
1/*
2 * C-Brick Serial Port (and console) driver for SGI Altix machines.
3 *
4 * This driver is NOT suitable for talking to the l1-controller for
5 * anything other than 'console activities' --- please use the l1
6 * driver for that.
7 *
8 *
9 * Copyright (c) 2004-2006 Silicon Graphics, Inc. All Rights Reserved.
10 *
11 * Contact information: Silicon Graphics, Inc., 1500 Crittenden Lane,
12 * Mountain View, CA 94043, or:
13 *
14 * http://www.sgi.com
15 *
16 * For further information regarding this notice, see:
17 *
18 * http://oss.sgi.com/projects/GenInfo/NoticeExplan
19 */
20
21#include <linux/interrupt.h>
22#include <linux/tty.h>
23#include <linux/tty_flip.h>
24#include <linux/serial.h>
25#include <linux/console.h>
26#include <linux/init.h>
27#include <linux/sysrq.h>
28#include <linux/circ_buf.h>
29#include <linux/serial_reg.h>
30#include <linux/delay.h> /* for mdelay */
31#include <linux/miscdevice.h>
32#include <linux/serial_core.h>
33
34#include <asm/io.h>
35#include <asm/sn/simulator.h>
36#include <asm/sn/sn_sal.h>
37
38/* number of characters we can transmit to the SAL console at a time */
39#define SN_SAL_MAX_CHARS 120
40
41/* 64K, when we're asynch, it must be at least printk's LOG_BUF_LEN to
42 * avoid losing chars, (always has to be a power of 2) */
43#define SN_SAL_BUFFER_SIZE (64 * (1 << 10))
44
45#define SN_SAL_UART_FIFO_DEPTH 16
46#define SN_SAL_UART_FIFO_SPEED_CPS (9600/10)
47
48/* sn_transmit_chars() calling args */
49#define TRANSMIT_BUFFERED 0
50#define TRANSMIT_RAW 1
51
52/* To use dynamic numbers only and not use the assigned major and minor,
53 * define the following.. */
54 /* #define USE_DYNAMIC_MINOR 1 *//* use dynamic minor number */
55#define USE_DYNAMIC_MINOR 0 /* Don't rely on misc_register dynamic minor */
56
57/* Device name we're using */
58#define DEVICE_NAME "ttySG"
59#define DEVICE_NAME_DYNAMIC "ttySG0" /* need full name for misc_register */
60/* The major/minor we are using, ignored for USE_DYNAMIC_MINOR */
61#define DEVICE_MAJOR 204
62#define DEVICE_MINOR 40
63
64#ifdef CONFIG_MAGIC_SYSRQ
65static char sysrq_serial_str[] = "\eSYS";
66static char *sysrq_serial_ptr = sysrq_serial_str;
67static unsigned long sysrq_requested;
68#endif /* CONFIG_MAGIC_SYSRQ */
69
70/*
71 * Port definition - this kinda drives it all
72 */
73struct sn_cons_port {
74 struct timer_list sc_timer;
75 struct uart_port sc_port;
76 struct sn_sal_ops {
77 int (*sal_puts_raw) (const char *s, int len);
78 int (*sal_puts) (const char *s, int len);
79 int (*sal_getc) (void);
80 int (*sal_input_pending) (void);
81 void (*sal_wakeup_transmit) (struct sn_cons_port *, int);
82 } *sc_ops;
83 unsigned long sc_interrupt_timeout;
84 int sc_is_asynch;
85};
86
87static struct sn_cons_port sal_console_port;
88static int sn_process_input;
89
90/* Only used if USE_DYNAMIC_MINOR is set to 1 */
91static struct miscdevice misc; /* used with misc_register for dynamic */
92
93extern void early_sn_setup(void);
94
95#undef DEBUG
96#ifdef DEBUG
97static int sn_debug_printf(const char *fmt, ...);
98#define DPRINTF(x...) sn_debug_printf(x)
99#else
100#define DPRINTF(x...) do { } while (0)
101#endif
102
103/* Prototypes */
104static int snt_hw_puts_raw(const char *, int);
105static int snt_hw_puts_buffered(const char *, int);
106static int snt_poll_getc(void);
107static int snt_poll_input_pending(void);
108static int snt_intr_getc(void);
109static int snt_intr_input_pending(void);
110static void sn_transmit_chars(struct sn_cons_port *, int);
111
112/* A table for polling:
113 */
114static struct sn_sal_ops poll_ops = {
115 .sal_puts_raw = snt_hw_puts_raw,
116 .sal_puts = snt_hw_puts_raw,
117 .sal_getc = snt_poll_getc,
118 .sal_input_pending = snt_poll_input_pending
119};
120
121/* A table for interrupts enabled */
122static struct sn_sal_ops intr_ops = {
123 .sal_puts_raw = snt_hw_puts_raw,
124 .sal_puts = snt_hw_puts_buffered,
125 .sal_getc = snt_intr_getc,
126 .sal_input_pending = snt_intr_input_pending,
127 .sal_wakeup_transmit = sn_transmit_chars
128};
129
130/* the console does output in two distinctly different ways:
131 * synchronous (raw) and asynchronous (buffered). initially, early_printk
132 * does synchronous output. any data written goes directly to the SAL
133 * to be output (incidentally, it is internally buffered by the SAL)
134 * after interrupts and timers are initialized and available for use,
135 * the console init code switches to asynchronous output. this is
136 * also the earliest opportunity to begin polling for console input.
137 * after console initialization, console output and tty (serial port)
138 * output is buffered and sent to the SAL asynchronously (either by
139 * timer callback or by UART interrupt) */
140
141/* routines for running the console in polling mode */
142
143/**
144 * snt_poll_getc - Get a character from the console in polling mode
145 *
146 */
147static int snt_poll_getc(void)
148{
149 int ch;
150
151 ia64_sn_console_getc(&ch);
152 return ch;
153}
154
155/**
156 * snt_poll_input_pending - Check if any input is waiting - polling mode.
157 *
158 */
159static int snt_poll_input_pending(void)
160{
161 int status, input;
162
163 status = ia64_sn_console_check(&input);
164 return !status && input;
165}
166
167/* routines for an interrupt driven console (normal) */
168
169/**
170 * snt_intr_getc - Get a character from the console, interrupt mode
171 *
172 */
173static int snt_intr_getc(void)
174{
175 return ia64_sn_console_readc();
176}
177
178/**
179 * snt_intr_input_pending - Check if input is pending, interrupt mode
180 *
181 */
182static int snt_intr_input_pending(void)
183{
184 return ia64_sn_console_intr_status() & SAL_CONSOLE_INTR_RECV;
185}
186
187/* these functions are polled and interrupt */
188
189/**
190 * snt_hw_puts_raw - Send raw string to the console, polled or interrupt mode
191 * @s: String
192 * @len: Length
193 *
194 */
195static int snt_hw_puts_raw(const char *s, int len)
196{
197 /* this will call the PROM and not return until this is done */
198 return ia64_sn_console_putb(s, len);
199}
200
201/**
202 * snt_hw_puts_buffered - Send string to console, polled or interrupt mode
203 * @s: String
204 * @len: Length
205 *
206 */
207static int snt_hw_puts_buffered(const char *s, int len)
208{
209 /* queue data to the PROM */
210 return ia64_sn_console_xmit_chars((char *)s, len);
211}
212
213/* uart interface structs
214 * These functions are associated with the uart_port that the serial core
215 * infrastructure calls.
216 *
217 * Note: Due to how the console works, many routines are no-ops.
218 */
219
220/**
221 * snp_type - What type of console are we?
222 * @port: Port to operate with (we ignore since we only have one port)
223 *
224 */
225static const char *snp_type(struct uart_port *port)
226{
227 return ("SGI SN L1");
228}
229
230/**
231 * snp_tx_empty - Is the transmitter empty? We pretend we're always empty
232 * @port: Port to operate on (we ignore since we only have one port)
233 *
234 */
235static unsigned int snp_tx_empty(struct uart_port *port)
236{
237 return 1;
238}
239
240/**
241 * snp_stop_tx - stop the transmitter - no-op for us
242 * @port: Port to operat eon - we ignore - no-op function
243 *
244 */
245static void snp_stop_tx(struct uart_port *port)
246{
247}
248
249/**
250 * snp_release_port - Free i/o and resources for port - no-op for us
251 * @port: Port to operate on - we ignore - no-op function
252 *
253 */
254static void snp_release_port(struct uart_port *port)
255{
256}
257
258/**
259 * snp_shutdown - shut down the port - free irq and disable - no-op for us
260 * @port: Port to shut down - we ignore
261 *
262 */
263static void snp_shutdown(struct uart_port *port)
264{
265}
266
267/**
268 * snp_set_mctrl - set control lines (dtr, rts, etc) - no-op for our console
269 * @port: Port to operate on - we ignore
270 * @mctrl: Lines to set/unset - we ignore
271 *
272 */
273static void snp_set_mctrl(struct uart_port *port, unsigned int mctrl)
274{
275}
276
277/**
278 * snp_get_mctrl - get contorl line info, we just return a static value
279 * @port: port to operate on - we only have one port so we ignore this
280 *
281 */
282static unsigned int snp_get_mctrl(struct uart_port *port)
283{
284 return TIOCM_CAR | TIOCM_RNG | TIOCM_DSR | TIOCM_CTS;
285}
286
287/**
288 * snp_stop_rx - Stop the receiver - we ignor ethis
289 * @port: Port to operate on - we ignore
290 *
291 */
292static void snp_stop_rx(struct uart_port *port)
293{
294}
295
296/**
297 * snp_start_tx - Start transmitter
298 * @port: Port to operate on
299 *
300 */
301static void snp_start_tx(struct uart_port *port)
302{
303 if (sal_console_port.sc_ops->sal_wakeup_transmit)
304 sal_console_port.sc_ops->sal_wakeup_transmit(&sal_console_port,
305 TRANSMIT_BUFFERED);
306
307}
308
309/**
310 * snp_break_ctl - handle breaks - ignored by us
311 * @port: Port to operate on
312 * @break_state: Break state
313 *
314 */
315static void snp_break_ctl(struct uart_port *port, int break_state)
316{
317}
318
319/**
320 * snp_startup - Start up the serial port - always return 0 (We're always on)
321 * @port: Port to operate on
322 *
323 */
324static int snp_startup(struct uart_port *port)
325{
326 return 0;
327}
328
329/**
330 * snp_set_termios - set termios stuff - we ignore these
331 * @port: port to operate on
332 * @termios: New settings
333 * @termios: Old
334 *
335 */
336static void
337snp_set_termios(struct uart_port *port, struct ktermios *termios,
338 struct ktermios *old)
339{
340}
341
342/**
343 * snp_request_port - allocate resources for port - ignored by us
344 * @port: port to operate on
345 *
346 */
347static int snp_request_port(struct uart_port *port)
348{
349 return 0;
350}
351
352/**
353 * snp_config_port - allocate resources, set up - we ignore, we're always on
354 * @port: Port to operate on
355 * @flags: flags used for port setup
356 *
357 */
358static void snp_config_port(struct uart_port *port, int flags)
359{
360}
361
362/* Associate the uart functions above - given to serial core */
363
364static const struct uart_ops sn_console_ops = {
365 .tx_empty = snp_tx_empty,
366 .set_mctrl = snp_set_mctrl,
367 .get_mctrl = snp_get_mctrl,
368 .stop_tx = snp_stop_tx,
369 .start_tx = snp_start_tx,
370 .stop_rx = snp_stop_rx,
371 .break_ctl = snp_break_ctl,
372 .startup = snp_startup,
373 .shutdown = snp_shutdown,
374 .set_termios = snp_set_termios,
375 .pm = NULL,
376 .type = snp_type,
377 .release_port = snp_release_port,
378 .request_port = snp_request_port,
379 .config_port = snp_config_port,
380 .verify_port = NULL,
381};
382
383/* End of uart struct functions and defines */
384
385#ifdef DEBUG
386
387/**
388 * sn_debug_printf - close to hardware debugging printf
389 * @fmt: printf format
390 *
391 * This is as "close to the metal" as we can get, used when the driver
392 * itself may be broken.
393 *
394 */
395static int sn_debug_printf(const char *fmt, ...)
396{
397 static char printk_buf[1024];
398 int printed_len;
399 va_list args;
400
401 va_start(args, fmt);
402 printed_len = vsnprintf(printk_buf, sizeof(printk_buf), fmt, args);
403
404 if (!sal_console_port.sc_ops) {
405 sal_console_port.sc_ops = &poll_ops;
406 early_sn_setup();
407 }
408 sal_console_port.sc_ops->sal_puts_raw(printk_buf, printed_len);
409
410 va_end(args);
411 return printed_len;
412}
413#endif /* DEBUG */
414
415/*
416 * Interrupt handling routines.
417 */
418
419/**
420 * sn_receive_chars - Grab characters, pass them to tty layer
421 * @port: Port to operate on
422 * @flags: irq flags
423 *
424 * Note: If we're not registered with the serial core infrastructure yet,
425 * we don't try to send characters to it...
426 *
427 */
428static void
429sn_receive_chars(struct sn_cons_port *port, unsigned long flags)
430{
431 struct tty_port *tport = NULL;
432 int ch;
433
434 if (!port) {
435 printk(KERN_ERR "sn_receive_chars - port NULL so can't receive\n");
436 return;
437 }
438
439 if (!port->sc_ops) {
440 printk(KERN_ERR "sn_receive_chars - port->sc_ops NULL so can't receive\n");
441 return;
442 }
443
444 if (port->sc_port.state) {
445 /* The serial_core stuffs are initialized, use them */
446 tport = &port->sc_port.state->port;
447 }
448
449 while (port->sc_ops->sal_input_pending()) {
450 ch = port->sc_ops->sal_getc();
451 if (ch < 0) {
452 printk(KERN_ERR "sn_console: An error occurred while "
453 "obtaining data from the console (0x%0x)\n", ch);
454 break;
455 }
456#ifdef CONFIG_MAGIC_SYSRQ
457 if (sysrq_requested) {
458 unsigned long sysrq_timeout = sysrq_requested + HZ*5;
459
460 sysrq_requested = 0;
461 if (ch && time_before(jiffies, sysrq_timeout)) {
462 spin_unlock_irqrestore(&port->sc_port.lock, flags);
463 handle_sysrq(ch);
464 spin_lock_irqsave(&port->sc_port.lock, flags);
465 /* ignore actual sysrq command char */
466 continue;
467 }
468 }
469 if (ch == *sysrq_serial_ptr) {
470 if (!(*++sysrq_serial_ptr)) {
471 sysrq_requested = jiffies;
472 sysrq_serial_ptr = sysrq_serial_str;
473 }
474 /*
475 * ignore the whole sysrq string except for the
476 * leading escape
477 */
478 if (ch != '\e')
479 continue;
480 }
481 else
482 sysrq_serial_ptr = sysrq_serial_str;
483#endif /* CONFIG_MAGIC_SYSRQ */
484
485 /* record the character to pass up to the tty layer */
486 if (tport) {
487 if (tty_insert_flip_char(tport, ch, TTY_NORMAL) == 0)
488 break;
489 }
490 port->sc_port.icount.rx++;
491 }
492
493 if (tport)
494 tty_flip_buffer_push(tport);
495}
496
497/**
498 * sn_transmit_chars - grab characters from serial core, send off
499 * @port: Port to operate on
500 * @raw: Transmit raw or buffered
501 *
502 * Note: If we're early, before we're registered with serial core, the
503 * writes are going through sn_sal_console_write because that's how
504 * register_console has been set up. We currently could have asynch
505 * polls calling this function due to sn_sal_switch_to_asynch but we can
506 * ignore them until we register with the serial core stuffs.
507 *
508 */
509static void sn_transmit_chars(struct sn_cons_port *port, int raw)
510{
511 int xmit_count, tail, head, loops, ii;
512 int result;
513 char *start;
514 struct circ_buf *xmit;
515
516 if (!port)
517 return;
518
519 BUG_ON(!port->sc_is_asynch);
520
521 if (port->sc_port.state) {
522 /* We're initialized, using serial core infrastructure */
523 xmit = &port->sc_port.state->xmit;
524 } else {
525 /* Probably sn_sal_switch_to_asynch has been run but serial core isn't
526 * initialized yet. Just return. Writes are going through
527 * sn_sal_console_write (due to register_console) at this time.
528 */
529 return;
530 }
531
532 if (uart_circ_empty(xmit) || uart_tx_stopped(&port->sc_port)) {
533 /* Nothing to do. */
534 ia64_sn_console_intr_disable(SAL_CONSOLE_INTR_XMIT);
535 return;
536 }
537
538 head = xmit->head;
539 tail = xmit->tail;
540 start = &xmit->buf[tail];
541
542 /* twice around gets the tail to the end of the buffer and
543 * then to the head, if needed */
544 loops = (head < tail) ? 2 : 1;
545
546 for (ii = 0; ii < loops; ii++) {
547 xmit_count = (head < tail) ?
548 (UART_XMIT_SIZE - tail) : (head - tail);
549
550 if (xmit_count > 0) {
551 if (raw == TRANSMIT_RAW)
552 result =
553 port->sc_ops->sal_puts_raw(start,
554 xmit_count);
555 else
556 result =
557 port->sc_ops->sal_puts(start, xmit_count);
558#ifdef DEBUG
559 if (!result)
560 DPRINTF("`");
561#endif
562 if (result > 0) {
563 xmit_count -= result;
564 port->sc_port.icount.tx += result;
565 tail += result;
566 tail &= UART_XMIT_SIZE - 1;
567 xmit->tail = tail;
568 start = &xmit->buf[tail];
569 }
570 }
571 }
572
573 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
574 uart_write_wakeup(&port->sc_port);
575
576 if (uart_circ_empty(xmit))
577 snp_stop_tx(&port->sc_port); /* no-op for us */
578}
579
580/**
581 * sn_sal_interrupt - Handle console interrupts
582 * @irq: irq #, useful for debug statements
583 * @dev_id: our pointer to our port (sn_cons_port which contains the uart port)
584 *
585 */
586static irqreturn_t sn_sal_interrupt(int irq, void *dev_id)
587{
588 struct sn_cons_port *port = (struct sn_cons_port *)dev_id;
589 unsigned long flags;
590 int status = ia64_sn_console_intr_status();
591
592 if (!port)
593 return IRQ_NONE;
594
595 spin_lock_irqsave(&port->sc_port.lock, flags);
596 if (status & SAL_CONSOLE_INTR_RECV) {
597 sn_receive_chars(port, flags);
598 }
599 if (status & SAL_CONSOLE_INTR_XMIT) {
600 sn_transmit_chars(port, TRANSMIT_BUFFERED);
601 }
602 spin_unlock_irqrestore(&port->sc_port.lock, flags);
603 return IRQ_HANDLED;
604}
605
606/**
607 * sn_sal_timer_poll - this function handles polled console mode
608 * @data: A pointer to our sn_cons_port (which contains the uart port)
609 *
610 * data is the pointer that init_timer will store for us. This function is
611 * associated with init_timer to see if there is any console traffic.
612 * Obviously not used in interrupt mode
613 *
614 */
615static void sn_sal_timer_poll(struct timer_list *t)
616{
617 struct sn_cons_port *port = from_timer(port, t, sc_timer);
618 unsigned long flags;
619
620 if (!port)
621 return;
622
623 if (!port->sc_port.irq) {
624 spin_lock_irqsave(&port->sc_port.lock, flags);
625 if (sn_process_input)
626 sn_receive_chars(port, flags);
627 sn_transmit_chars(port, TRANSMIT_RAW);
628 spin_unlock_irqrestore(&port->sc_port.lock, flags);
629 mod_timer(&port->sc_timer,
630 jiffies + port->sc_interrupt_timeout);
631 }
632}
633
634/*
635 * Boot-time initialization code
636 */
637
638/**
639 * sn_sal_switch_to_asynch - Switch to async mode (as opposed to synch)
640 * @port: Our sn_cons_port (which contains the uart port)
641 *
642 * So this is used by sn_sal_serial_console_init (early on, before we're
643 * registered with serial core). It's also used by sn_sal_init
644 * right after we've registered with serial core. The later only happens
645 * if we didn't already come through here via sn_sal_serial_console_init.
646 *
647 */
648static void __init sn_sal_switch_to_asynch(struct sn_cons_port *port)
649{
650 unsigned long flags;
651
652 if (!port)
653 return;
654
655 DPRINTF("sn_console: about to switch to asynchronous console\n");
656
657 /* without early_printk, we may be invoked late enough to race
658 * with other cpus doing console IO at this point, however
659 * console interrupts will never be enabled */
660 spin_lock_irqsave(&port->sc_port.lock, flags);
661
662 /* early_printk invocation may have done this for us */
663 if (!port->sc_ops)
664 port->sc_ops = &poll_ops;
665
666 /* we can't turn on the console interrupt (as request_irq
667 * calls kmalloc, which isn't set up yet), so we rely on a
668 * timer to poll for input and push data from the console
669 * buffer.
670 */
671 timer_setup(&port->sc_timer, sn_sal_timer_poll, 0);
672
673 if (IS_RUNNING_ON_SIMULATOR())
674 port->sc_interrupt_timeout = 6;
675 else {
676 /* 960cps / 16 char FIFO = 60HZ
677 * HZ / (SN_SAL_FIFO_SPEED_CPS / SN_SAL_FIFO_DEPTH) */
678 port->sc_interrupt_timeout =
679 HZ * SN_SAL_UART_FIFO_DEPTH / SN_SAL_UART_FIFO_SPEED_CPS;
680 }
681 mod_timer(&port->sc_timer, jiffies + port->sc_interrupt_timeout);
682
683 port->sc_is_asynch = 1;
684 spin_unlock_irqrestore(&port->sc_port.lock, flags);
685}
686
687/**
688 * sn_sal_switch_to_interrupts - Switch to interrupt driven mode
689 * @port: Our sn_cons_port (which contains the uart port)
690 *
691 * In sn_sal_init, after we're registered with serial core and
692 * the port is added, this function is called to switch us to interrupt
693 * mode. We were previously in asynch/polling mode (using init_timer).
694 *
695 * We attempt to switch to interrupt mode here by calling
696 * request_irq. If that works out, we enable receive interrupts.
697 */
698static void __init sn_sal_switch_to_interrupts(struct sn_cons_port *port)
699{
700 unsigned long flags;
701
702 if (port) {
703 DPRINTF("sn_console: switching to interrupt driven console\n");
704
705 if (request_irq(SGI_UART_VECTOR, sn_sal_interrupt,
706 IRQF_SHARED,
707 "SAL console driver", port) >= 0) {
708 spin_lock_irqsave(&port->sc_port.lock, flags);
709 port->sc_port.irq = SGI_UART_VECTOR;
710 port->sc_ops = &intr_ops;
711 irq_set_handler(port->sc_port.irq, handle_level_irq);
712
713 /* turn on receive interrupts */
714 ia64_sn_console_intr_enable(SAL_CONSOLE_INTR_RECV);
715 spin_unlock_irqrestore(&port->sc_port.lock, flags);
716 }
717 else {
718 printk(KERN_INFO
719 "sn_console: console proceeding in polled mode\n");
720 }
721 }
722}
723
724/*
725 * Kernel console definitions
726 */
727
728static void sn_sal_console_write(struct console *, const char *, unsigned);
729static int sn_sal_console_setup(struct console *, char *);
730static struct uart_driver sal_console_uart;
731extern struct tty_driver *uart_console_device(struct console *, int *);
732
733static struct console sal_console = {
734 .name = DEVICE_NAME,
735 .write = sn_sal_console_write,
736 .device = uart_console_device,
737 .setup = sn_sal_console_setup,
738 .index = -1, /* unspecified */
739 .data = &sal_console_uart,
740};
741
742#define SAL_CONSOLE &sal_console
743
744static struct uart_driver sal_console_uart = {
745 .owner = THIS_MODULE,
746 .driver_name = "sn_console",
747 .dev_name = DEVICE_NAME,
748 .major = 0, /* major/minor set at registration time per USE_DYNAMIC_MINOR */
749 .minor = 0,
750 .nr = 1, /* one port */
751 .cons = SAL_CONSOLE,
752};
753
754/**
755 * sn_sal_init - When the kernel loads us, get us rolling w/ serial core
756 *
757 * Before this is called, we've been printing kernel messages in a special
758 * early mode not making use of the serial core infrastructure. When our
759 * driver is loaded for real, we register the driver and port with serial
760 * core and try to enable interrupt driven mode.
761 *
762 */
763static int __init sn_sal_init(void)
764{
765 int retval;
766
767 if (!ia64_platform_is("sn2"))
768 return 0;
769
770 printk(KERN_INFO "sn_console: Console driver init\n");
771
772 if (USE_DYNAMIC_MINOR == 1) {
773 misc.minor = MISC_DYNAMIC_MINOR;
774 misc.name = DEVICE_NAME_DYNAMIC;
775 retval = misc_register(&misc);
776 if (retval != 0) {
777 printk(KERN_WARNING "Failed to register console "
778 "device using misc_register.\n");
779 return -ENODEV;
780 }
781 sal_console_uart.major = MISC_MAJOR;
782 sal_console_uart.minor = misc.minor;
783 } else {
784 sal_console_uart.major = DEVICE_MAJOR;
785 sal_console_uart.minor = DEVICE_MINOR;
786 }
787
788 /* We register the driver and the port before switching to interrupts
789 * or async above so the proper uart structures are populated */
790
791 if (uart_register_driver(&sal_console_uart) < 0) {
792 printk
793 ("ERROR sn_sal_init failed uart_register_driver, line %d\n",
794 __LINE__);
795 return -ENODEV;
796 }
797
798 spin_lock_init(&sal_console_port.sc_port.lock);
799
800 /* Setup the port struct with the minimum needed */
801 sal_console_port.sc_port.membase = (char *)1; /* just needs to be non-zero */
802 sal_console_port.sc_port.type = PORT_16550A;
803 sal_console_port.sc_port.fifosize = SN_SAL_MAX_CHARS;
804 sal_console_port.sc_port.ops = &sn_console_ops;
805 sal_console_port.sc_port.line = 0;
806
807 if (uart_add_one_port(&sal_console_uart, &sal_console_port.sc_port) < 0) {
808 /* error - not sure what I'd do - so I'll do nothing */
809 printk(KERN_ERR "%s: unable to add port\n", __func__);
810 }
811
812 /* when this driver is compiled in, the console initialization
813 * will have already switched us into asynchronous operation
814 * before we get here through the initcalls */
815 if (!sal_console_port.sc_is_asynch) {
816 sn_sal_switch_to_asynch(&sal_console_port);
817 }
818
819 /* at this point (device_init) we can try to turn on interrupts */
820 if (!IS_RUNNING_ON_SIMULATOR()) {
821 sn_sal_switch_to_interrupts(&sal_console_port);
822 }
823 sn_process_input = 1;
824 return 0;
825}
826device_initcall(sn_sal_init);
827
828/**
829 * puts_raw_fixed - sn_sal_console_write helper for adding \r's as required
830 * @puts_raw : puts function to do the writing
831 * @s: input string
832 * @count: length
833 *
834 * We need a \r ahead of every \n for direct writes through
835 * ia64_sn_console_putb (what sal_puts_raw below actually does).
836 *
837 */
838
839static void puts_raw_fixed(int (*puts_raw) (const char *s, int len),
840 const char *s, int count)
841{
842 const char *s1;
843
844 /* Output '\r' before each '\n' */
845 while ((s1 = memchr(s, '\n', count)) != NULL) {
846 puts_raw(s, s1 - s);
847 puts_raw("\r\n", 2);
848 count -= s1 + 1 - s;
849 s = s1 + 1;
850 }
851 puts_raw(s, count);
852}
853
854/**
855 * sn_sal_console_write - Print statements before serial core available
856 * @console: Console to operate on - we ignore since we have just one
857 * @s: String to send
858 * @count: length
859 *
860 * This is referenced in the console struct. It is used for early
861 * console printing before we register with serial core and for things
862 * such as kdb. The console_lock must be held when we get here.
863 *
864 * This function has some code for trying to print output even if the lock
865 * is held. We try to cover the case where a lock holder could have died.
866 * We don't use this special case code if we're not registered with serial
867 * core yet. After we're registered with serial core, the only time this
868 * function would be used is for high level kernel output like magic sys req,
869 * kdb, and printk's.
870 */
871static void
872sn_sal_console_write(struct console *co, const char *s, unsigned count)
873{
874 unsigned long flags = 0;
875 struct sn_cons_port *port = &sal_console_port;
876 static int stole_lock = 0;
877
878 BUG_ON(!port->sc_is_asynch);
879
880 /* We can't look at the xmit buffer if we're not registered with serial core
881 * yet. So only do the fancy recovery after registering
882 */
883 if (!port->sc_port.state) {
884 /* Not yet registered with serial core - simple case */
885 puts_raw_fixed(port->sc_ops->sal_puts_raw, s, count);
886 return;
887 }
888
889 /* somebody really wants this output, might be an
890 * oops, kdb, panic, etc. make sure they get it. */
891 if (spin_is_locked(&port->sc_port.lock)) {
892 int lhead = port->sc_port.state->xmit.head;
893 int ltail = port->sc_port.state->xmit.tail;
894 int counter, got_lock = 0;
895
896 /*
897 * We attempt to determine if someone has died with the
898 * lock. We wait ~20 secs after the head and tail ptrs
899 * stop moving and assume the lock holder is not functional
900 * and plow ahead. If the lock is freed within the time out
901 * period we re-get the lock and go ahead normally. We also
902 * remember if we have plowed ahead so that we don't have
903 * to wait out the time out period again - the asumption
904 * is that we will time out again.
905 */
906
907 for (counter = 0; counter < 150; mdelay(125), counter++) {
908 if (!spin_is_locked(&port->sc_port.lock)
909 || stole_lock) {
910 if (!stole_lock) {
911 spin_lock_irqsave(&port->sc_port.lock,
912 flags);
913 got_lock = 1;
914 }
915 break;
916 } else {
917 /* still locked */
918 if ((lhead != port->sc_port.state->xmit.head)
919 || (ltail !=
920 port->sc_port.state->xmit.tail)) {
921 lhead =
922 port->sc_port.state->xmit.head;
923 ltail =
924 port->sc_port.state->xmit.tail;
925 counter = 0;
926 }
927 }
928 }
929 /* flush anything in the serial core xmit buffer, raw */
930 sn_transmit_chars(port, 1);
931 if (got_lock) {
932 spin_unlock_irqrestore(&port->sc_port.lock, flags);
933 stole_lock = 0;
934 } else {
935 /* fell thru */
936 stole_lock = 1;
937 }
938 puts_raw_fixed(port->sc_ops->sal_puts_raw, s, count);
939 } else {
940 stole_lock = 0;
941 spin_lock_irqsave(&port->sc_port.lock, flags);
942 sn_transmit_chars(port, 1);
943 spin_unlock_irqrestore(&port->sc_port.lock, flags);
944
945 puts_raw_fixed(port->sc_ops->sal_puts_raw, s, count);
946 }
947}
948
949
950/**
951 * sn_sal_console_setup - Set up console for early printing
952 * @co: Console to work with
953 * @options: Options to set
954 *
955 * Altix console doesn't do anything with baud rates, etc, anyway.
956 *
957 * This isn't required since not providing the setup function in the
958 * console struct is ok. However, other patches like KDB plop something
959 * here so providing it is easier.
960 *
961 */
962static int sn_sal_console_setup(struct console *co, char *options)
963{
964 return 0;
965}
966
967/**
968 * sn_sal_console_write_early - simple early output routine
969 * @co - console struct
970 * @s - string to print
971 * @count - count
972 *
973 * Simple function to provide early output, before even
974 * sn_sal_serial_console_init is called. Referenced in the
975 * console struct registerd in sn_serial_console_early_setup.
976 *
977 */
978static void __init
979sn_sal_console_write_early(struct console *co, const char *s, unsigned count)
980{
981 puts_raw_fixed(sal_console_port.sc_ops->sal_puts_raw, s, count);
982}
983
984/* Used for very early console printing - again, before
985 * sn_sal_serial_console_init is run */
986static struct console sal_console_early __initdata = {
987 .name = "sn_sal",
988 .write = sn_sal_console_write_early,
989 .flags = CON_PRINTBUFFER,
990 .index = -1,
991};
992
993/**
994 * sn_serial_console_early_setup - Sets up early console output support
995 *
996 * Register a console early on... This is for output before even
997 * sn_sal_serial_cosnole_init is called. This function is called from
998 * setup.c. This allows us to do really early polled writes. When
999 * sn_sal_serial_console_init is called, this console is unregistered
1000 * and a new one registered.
1001 */
1002int __init sn_serial_console_early_setup(void)
1003{
1004 if (!ia64_platform_is("sn2"))
1005 return -1;
1006
1007 sal_console_port.sc_ops = &poll_ops;
1008 spin_lock_init(&sal_console_port.sc_port.lock);
1009 early_sn_setup(); /* Find SAL entry points */
1010 register_console(&sal_console_early);
1011
1012 return 0;
1013}
1014
1015/**
1016 * sn_sal_serial_console_init - Early console output - set up for register
1017 *
1018 * This function is called when regular console init happens. Because we
1019 * support even earlier console output with sn_serial_console_early_setup
1020 * (called from setup.c directly), this function unregisters the really
1021 * early console.
1022 *
1023 * Note: Even if setup.c doesn't register sal_console_early, unregistering
1024 * it here doesn't hurt anything.
1025 *
1026 */
1027static int __init sn_sal_serial_console_init(void)
1028{
1029 if (ia64_platform_is("sn2")) {
1030 sn_sal_switch_to_asynch(&sal_console_port);
1031 DPRINTF("sn_sal_serial_console_init : register console\n");
1032 register_console(&sal_console);
1033 unregister_console(&sal_console_early);
1034 }
1035 return 0;
1036}
1037
1038console_initcall(sn_sal_serial_console_init);