1# SPDX-License-Identifier: GPL-2.0-only
  2#
  3# Phy drivers for Broadcom platforms
  4#
  5menu "PHY drivers for Broadcom platforms"
  6
  7config PHY_BCM63XX_USBH
  8	tristate "BCM63xx USBH PHY driver"
  9	depends on BMIPS_GENERIC || COMPILE_TEST
 10	select GENERIC_PHY
 11	help
 12	  Enable this to support the BCM63xx USBH PHY driver.
 13	  If unsure, say N.
 14
 15config PHY_CYGNUS_PCIE
 16	tristate "Broadcom Cygnus PCIe PHY driver"
 17	depends on OF && (ARCH_BCM_CYGNUS || COMPILE_TEST)
 18	select GENERIC_PHY
 19	default ARCH_BCM_CYGNUS
 20	help
 21	  Enable this to support the Broadcom Cygnus PCIe PHY.
 22	  If unsure, say N.
 23
 24config PHY_BCM_SR_USB
 25	tristate "Broadcom Stingray USB PHY driver"
 26	depends on OF && (ARCH_BCM_IPROC || COMPILE_TEST)
 27	select GENERIC_PHY
 28	default ARCH_BCM_IPROC
 29	help
 30	  Enable this to support the Broadcom Stingray USB PHY
 31	  driver. It supports all versions of Superspeed and
 32	  Highspeed PHYs.
 33	  If unsure, say N.
 34
 35config BCM_KONA_USB2_PHY
 36	tristate "Broadcom Kona USB2 PHY Driver"
 37	depends on HAS_IOMEM
 38	select GENERIC_PHY
 39	help
 40	  Enable this to support the Broadcom Kona USB 2.0 PHY.
 41
 42config PHY_BCM_NS_USB2
 43	tristate "Broadcom Northstar USB 2.0 PHY Driver"
 44	depends on ARCH_BCM_IPROC || COMPILE_TEST
 45	depends on HAS_IOMEM && OF
 46	select GENERIC_PHY
 47	help
 48	  Enable this to support Broadcom USB 2.0 PHY connected to the USB
 49	  controller on Northstar family.
 50
 51config PHY_BCM_NS_USB3
 52	tristate "Broadcom Northstar USB 3.0 PHY Driver"
 53	depends on ARCH_BCM_IPROC || COMPILE_TEST
 54	depends on HAS_IOMEM && OF
 55	depends on MDIO_BUS
 56	select GENERIC_PHY
 57	help
 58	  Enable this to support Broadcom USB 3.0 PHY connected to the USB
 59	  controller on Northstar family.
 60
 61config PHY_NS2_PCIE
 62	tristate "Broadcom Northstar2 PCIe PHY driver"
 63	depends on (OF && MDIO_BUS_MUX_BCM_IPROC) || (COMPILE_TEST && MDIO_BUS)
 64	select GENERIC_PHY
 65	default ARCH_BCM_IPROC
 66	help
 67	  Enable this to support the Broadcom Northstar2 PCIe PHY.
 68	  If unsure, say N.
 69
 70config PHY_NS2_USB_DRD
 71	tristate "Broadcom Northstar2 USB DRD PHY support"
 72	depends on OF && (ARCH_BCM_IPROC || COMPILE_TEST)
 73	select GENERIC_PHY
 74	select EXTCON
 75	default ARCH_BCM_IPROC
 76	help
 77	  Enable this to support the Broadcom Northstar2 USB DRD PHY.
 78	  This driver initializes the PHY in either HOST or DEVICE mode.
 79	  The host or device configuration is read from device tree.
 80
 81	  If unsure, say N.
 82
 83config PHY_BRCM_SATA
 84	tristate "Broadcom SATA PHY driver"
 85	depends on ARCH_BRCMSTB || ARCH_BCM_IPROC || BMIPS_GENERIC || \
 86		   ARCH_BCMBCA || COMPILE_TEST
 87	depends on OF
 88	select GENERIC_PHY
 89	default ARCH_BCM_IPROC
 90	help
 91	  Enable this to support the Broadcom SATA PHY.
 92	  If unsure, say N.
 93
 94config PHY_BRCM_USB
 95	tristate "Broadcom STB USB PHY driver"
 96	depends on ARCH_BCMBCA || ARCH_BRCMSTB || COMPILE_TEST
 97	depends on OF
 98	select GENERIC_PHY
 99	select SOC_BRCMSTB if ARCH_BRCMSTB
100	default ARCH_BCMBCA || ARCH_BRCMSTB
101	help
102	  Enable this to support the Broadcom STB USB PHY.
103	  This driver is required by the USB XHCI, EHCI and OHCI
104	  drivers.
105	  If unsure, say N.
106
107config PHY_BCM_SR_PCIE
108	tristate "Broadcom Stingray PCIe PHY driver"
109	depends on OF && (ARCH_BCM_IPROC || COMPILE_TEST)
110	select GENERIC_PHY
111	select MFD_SYSCON
112	default ARCH_BCM_IPROC
113	help
114	  Enable this to support the Broadcom Stingray PCIe PHY
115	  If unsure, say N.
116
117endmenu

 
 1#
 2# Phy drivers for Broadcom platforms
 3#
 
 
 
 
 
 
 
 
 
 
 4config PHY_CYGNUS_PCIE
 5	tristate "Broadcom Cygnus PCIe PHY driver"
 6	depends on OF && (ARCH_BCM_CYGNUS || COMPILE_TEST)
 7	select GENERIC_PHY
 8	default ARCH_BCM_CYGNUS
 9	help
10	  Enable this to support the Broadcom Cygnus PCIe PHY.
11	  If unsure, say N.
12
 
 
 
 
 
 
 
 
 
 
 
13config BCM_KONA_USB2_PHY
14	tristate "Broadcom Kona USB2 PHY Driver"
15	depends on HAS_IOMEM
16	select GENERIC_PHY
17	help
18	  Enable this to support the Broadcom Kona USB 2.0 PHY.
19
20config PHY_BCM_NS_USB2
21	tristate "Broadcom Northstar USB 2.0 PHY Driver"
22	depends on ARCH_BCM_IPROC || COMPILE_TEST
23	depends on HAS_IOMEM && OF
24	select GENERIC_PHY
25	help
26	  Enable this to support Broadcom USB 2.0 PHY connected to the USB
27	  controller on Northstar family.
28
29config PHY_BCM_NS_USB3
30	tristate "Broadcom Northstar USB 3.0 PHY Driver"
31	depends on ARCH_BCM_IPROC || COMPILE_TEST
32	depends on HAS_IOMEM && OF
33	depends on MDIO_BUS
34	select GENERIC_PHY
35	help
36	  Enable this to support Broadcom USB 3.0 PHY connected to the USB
37	  controller on Northstar family.
38
39config PHY_NS2_PCIE
40	tristate "Broadcom Northstar2 PCIe PHY driver"
41	depends on OF && MDIO_BUS_MUX_BCM_IPROC
42	select GENERIC_PHY
43	default ARCH_BCM_IPROC
44	help
45	  Enable this to support the Broadcom Northstar2 PCIe PHY.
46	  If unsure, say N.
47
48config PHY_NS2_USB_DRD
49	tristate "Broadcom Northstar2 USB DRD PHY support"
50	depends on OF && (ARCH_BCM_IPROC || COMPILE_TEST)
51	select GENERIC_PHY
52	select EXTCON
53	default ARCH_BCM_IPROC
54	help
55	  Enable this to support the Broadcom Northstar2 USB DRD PHY.
56	  This driver initializes the PHY in either HOST or DEVICE mode.
57	  The host or device configuration is read from device tree.
58
59	  If unsure, say N.
60
61config PHY_BRCM_SATA
62	tristate "Broadcom SATA PHY driver"
63	depends on ARCH_BRCMSTB || ARCH_BCM_IPROC || BMIPS_GENERIC || COMPILE_TEST
 
64	depends on OF
65	select GENERIC_PHY
66	default ARCH_BCM_IPROC
67	help
68	  Enable this to support the Broadcom SATA PHY.
69	  If unsure, say N.
70
71config PHY_BRCM_USB
72	tristate "Broadcom STB USB PHY driver"
73	depends on ARCH_BRCMSTB
74	depends on OF
75	select GENERIC_PHY
76	select SOC_BRCMSTB
77	default ARCH_BRCMSTB
78	help
79	  Enable this to support the Broadcom STB USB PHY.
80	  This driver is required by the USB XHCI, EHCI and OHCI
81	  drivers.
82	  If unsure, say N.