Loading...
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * ASIX AX8817X based USB 2.0 Ethernet Devices
4 * Copyright (C) 2003-2006 David Hollis <dhollis@davehollis.com>
5 * Copyright (C) 2005 Phil Chang <pchang23@sbcglobal.net>
6 * Copyright (C) 2006 James Painter <jamie.painter@iname.com>
7 * Copyright (c) 2002-2003 TiVo Inc.
8 */
9
10#include "asix.h"
11
12#define PHY_MODE_MARVELL 0x0000
13#define MII_MARVELL_LED_CTRL 0x0018
14#define MII_MARVELL_STATUS 0x001b
15#define MII_MARVELL_CTRL 0x0014
16
17#define MARVELL_LED_MANUAL 0x0019
18
19#define MARVELL_STATUS_HWCFG 0x0004
20
21#define MARVELL_CTRL_TXDELAY 0x0002
22#define MARVELL_CTRL_RXDELAY 0x0080
23
24#define PHY_MODE_RTL8211CL 0x000C
25
26#define AX88772A_PHY14H 0x14
27#define AX88772A_PHY14H_DEFAULT 0x442C
28
29#define AX88772A_PHY15H 0x15
30#define AX88772A_PHY15H_DEFAULT 0x03C8
31
32#define AX88772A_PHY16H 0x16
33#define AX88772A_PHY16H_DEFAULT 0x4044
34
35struct ax88172_int_data {
36 __le16 res1;
37 u8 link;
38 __le16 res2;
39 u8 status;
40 __le16 res3;
41} __packed;
42
43static void asix_status(struct usbnet *dev, struct urb *urb)
44{
45 struct ax88172_int_data *event;
46 int link;
47
48 if (urb->actual_length < 8)
49 return;
50
51 event = urb->transfer_buffer;
52 link = event->link & 0x01;
53 if (netif_carrier_ok(dev->net) != link) {
54 usbnet_link_change(dev, link, 1);
55 netdev_dbg(dev->net, "Link Status is: %d\n", link);
56 }
57}
58
59static void asix_set_netdev_dev_addr(struct usbnet *dev, u8 *addr)
60{
61 if (is_valid_ether_addr(addr)) {
62 eth_hw_addr_set(dev->net, addr);
63 } else {
64 netdev_info(dev->net, "invalid hw address, using random\n");
65 eth_hw_addr_random(dev->net);
66 }
67}
68
69/* Get the PHY Identifier from the PHYSID1 & PHYSID2 MII registers */
70static u32 asix_get_phyid(struct usbnet *dev)
71{
72 int phy_reg;
73 u32 phy_id;
74 int i;
75
76 /* Poll for the rare case the FW or phy isn't ready yet. */
77 for (i = 0; i < 100; i++) {
78 phy_reg = asix_mdio_read(dev->net, dev->mii.phy_id, MII_PHYSID1);
79 if (phy_reg < 0)
80 return 0;
81 if (phy_reg != 0 && phy_reg != 0xFFFF)
82 break;
83 mdelay(1);
84 }
85
86 if (phy_reg <= 0 || phy_reg == 0xFFFF)
87 return 0;
88
89 phy_id = (phy_reg & 0xffff) << 16;
90
91 phy_reg = asix_mdio_read(dev->net, dev->mii.phy_id, MII_PHYSID2);
92 if (phy_reg < 0)
93 return 0;
94
95 phy_id |= (phy_reg & 0xffff);
96
97 return phy_id;
98}
99
100static u32 asix_get_link(struct net_device *net)
101{
102 struct usbnet *dev = netdev_priv(net);
103
104 return mii_link_ok(&dev->mii);
105}
106
107static int asix_ioctl (struct net_device *net, struct ifreq *rq, int cmd)
108{
109 struct usbnet *dev = netdev_priv(net);
110
111 return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
112}
113
114/* We need to override some ethtool_ops so we require our
115 own structure so we don't interfere with other usbnet
116 devices that may be connected at the same time. */
117static const struct ethtool_ops ax88172_ethtool_ops = {
118 .get_drvinfo = asix_get_drvinfo,
119 .get_link = asix_get_link,
120 .get_msglevel = usbnet_get_msglevel,
121 .set_msglevel = usbnet_set_msglevel,
122 .get_wol = asix_get_wol,
123 .set_wol = asix_set_wol,
124 .get_eeprom_len = asix_get_eeprom_len,
125 .get_eeprom = asix_get_eeprom,
126 .set_eeprom = asix_set_eeprom,
127 .nway_reset = usbnet_nway_reset,
128 .get_link_ksettings = usbnet_get_link_ksettings_mii,
129 .set_link_ksettings = usbnet_set_link_ksettings_mii,
130};
131
132static void ax88172_set_multicast(struct net_device *net)
133{
134 struct usbnet *dev = netdev_priv(net);
135 struct asix_data *data = (struct asix_data *)&dev->data;
136 u8 rx_ctl = 0x8c;
137
138 if (net->flags & IFF_PROMISC) {
139 rx_ctl |= 0x01;
140 } else if (net->flags & IFF_ALLMULTI ||
141 netdev_mc_count(net) > AX_MAX_MCAST) {
142 rx_ctl |= 0x02;
143 } else if (netdev_mc_empty(net)) {
144 /* just broadcast and directed */
145 } else {
146 /* We use the 20 byte dev->data
147 * for our 8 byte filter buffer
148 * to avoid allocating memory that
149 * is tricky to free later */
150 struct netdev_hw_addr *ha;
151 u32 crc_bits;
152
153 memset(data->multi_filter, 0, AX_MCAST_FILTER_SIZE);
154
155 /* Build the multicast hash filter. */
156 netdev_for_each_mc_addr(ha, net) {
157 crc_bits = ether_crc(ETH_ALEN, ha->addr) >> 26;
158 data->multi_filter[crc_bits >> 3] |=
159 1 << (crc_bits & 7);
160 }
161
162 asix_write_cmd_async(dev, AX_CMD_WRITE_MULTI_FILTER, 0, 0,
163 AX_MCAST_FILTER_SIZE, data->multi_filter);
164
165 rx_ctl |= 0x10;
166 }
167
168 asix_write_cmd_async(dev, AX_CMD_WRITE_RX_CTL, rx_ctl, 0, 0, NULL);
169}
170
171static int ax88172_link_reset(struct usbnet *dev)
172{
173 u8 mode;
174 struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET };
175
176 mii_check_media(&dev->mii, 1, 1);
177 mii_ethtool_gset(&dev->mii, &ecmd);
178 mode = AX88172_MEDIUM_DEFAULT;
179
180 if (ecmd.duplex != DUPLEX_FULL)
181 mode |= ~AX88172_MEDIUM_FD;
182
183 netdev_dbg(dev->net, "ax88172_link_reset() speed: %u duplex: %d setting mode to 0x%04x\n",
184 ethtool_cmd_speed(&ecmd), ecmd.duplex, mode);
185
186 asix_write_medium_mode(dev, mode, 0);
187
188 return 0;
189}
190
191static const struct net_device_ops ax88172_netdev_ops = {
192 .ndo_open = usbnet_open,
193 .ndo_stop = usbnet_stop,
194 .ndo_start_xmit = usbnet_start_xmit,
195 .ndo_tx_timeout = usbnet_tx_timeout,
196 .ndo_change_mtu = usbnet_change_mtu,
197 .ndo_get_stats64 = dev_get_tstats64,
198 .ndo_set_mac_address = eth_mac_addr,
199 .ndo_validate_addr = eth_validate_addr,
200 .ndo_eth_ioctl = asix_ioctl,
201 .ndo_set_rx_mode = ax88172_set_multicast,
202};
203
204static void asix_phy_reset(struct usbnet *dev, unsigned int reset_bits)
205{
206 unsigned int timeout = 5000;
207
208 asix_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, reset_bits);
209
210 /* give phy_id a chance to process reset */
211 udelay(500);
212
213 /* See IEEE 802.3 "22.2.4.1.1 Reset": 500ms max */
214 while (timeout--) {
215 if (asix_mdio_read(dev->net, dev->mii.phy_id, MII_BMCR)
216 & BMCR_RESET)
217 udelay(100);
218 else
219 return;
220 }
221
222 netdev_err(dev->net, "BMCR_RESET timeout on phy_id %d\n",
223 dev->mii.phy_id);
224}
225
226static int ax88172_bind(struct usbnet *dev, struct usb_interface *intf)
227{
228 int ret = 0;
229 u8 buf[ETH_ALEN] = {0};
230 int i;
231 unsigned long gpio_bits = dev->driver_info->data;
232
233 usbnet_get_endpoints(dev,intf);
234
235 /* Toggle the GPIOs in a manufacturer/model specific way */
236 for (i = 2; i >= 0; i--) {
237 ret = asix_write_cmd(dev, AX_CMD_WRITE_GPIOS,
238 (gpio_bits >> (i * 8)) & 0xff, 0, 0, NULL, 0);
239 if (ret < 0)
240 goto out;
241 msleep(5);
242 }
243
244 ret = asix_write_rx_ctl(dev, 0x80, 0);
245 if (ret < 0)
246 goto out;
247
248 /* Get the MAC address */
249 ret = asix_read_cmd(dev, AX88172_CMD_READ_NODE_ID,
250 0, 0, ETH_ALEN, buf, 0);
251 if (ret < 0) {
252 netdev_dbg(dev->net, "read AX_CMD_READ_NODE_ID failed: %d\n",
253 ret);
254 goto out;
255 }
256
257 asix_set_netdev_dev_addr(dev, buf);
258
259 /* Initialize MII structure */
260 dev->mii.dev = dev->net;
261 dev->mii.mdio_read = asix_mdio_read;
262 dev->mii.mdio_write = asix_mdio_write;
263 dev->mii.phy_id_mask = 0x3f;
264 dev->mii.reg_num_mask = 0x1f;
265
266 dev->mii.phy_id = asix_read_phy_addr(dev, true);
267 if (dev->mii.phy_id < 0)
268 return dev->mii.phy_id;
269
270 dev->net->netdev_ops = &ax88172_netdev_ops;
271 dev->net->ethtool_ops = &ax88172_ethtool_ops;
272 dev->net->needed_headroom = 4; /* cf asix_tx_fixup() */
273 dev->net->needed_tailroom = 4; /* cf asix_tx_fixup() */
274
275 asix_phy_reset(dev, BMCR_RESET);
276 asix_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
277 ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP);
278 mii_nway_restart(&dev->mii);
279
280 return 0;
281
282out:
283 return ret;
284}
285
286static void ax88772_ethtool_get_strings(struct net_device *netdev, u32 sset,
287 u8 *data)
288{
289 switch (sset) {
290 case ETH_SS_TEST:
291 net_selftest_get_strings(data);
292 break;
293 }
294}
295
296static int ax88772_ethtool_get_sset_count(struct net_device *ndev, int sset)
297{
298 switch (sset) {
299 case ETH_SS_TEST:
300 return net_selftest_get_count();
301 default:
302 return -EOPNOTSUPP;
303 }
304}
305
306static void ax88772_ethtool_get_pauseparam(struct net_device *ndev,
307 struct ethtool_pauseparam *pause)
308{
309 struct usbnet *dev = netdev_priv(ndev);
310 struct asix_common_private *priv = dev->driver_priv;
311
312 phylink_ethtool_get_pauseparam(priv->phylink, pause);
313}
314
315static int ax88772_ethtool_set_pauseparam(struct net_device *ndev,
316 struct ethtool_pauseparam *pause)
317{
318 struct usbnet *dev = netdev_priv(ndev);
319 struct asix_common_private *priv = dev->driver_priv;
320
321 return phylink_ethtool_set_pauseparam(priv->phylink, pause);
322}
323
324static const struct ethtool_ops ax88772_ethtool_ops = {
325 .get_drvinfo = asix_get_drvinfo,
326 .get_link = usbnet_get_link,
327 .get_msglevel = usbnet_get_msglevel,
328 .set_msglevel = usbnet_set_msglevel,
329 .get_wol = asix_get_wol,
330 .set_wol = asix_set_wol,
331 .get_eeprom_len = asix_get_eeprom_len,
332 .get_eeprom = asix_get_eeprom,
333 .set_eeprom = asix_set_eeprom,
334 .nway_reset = phy_ethtool_nway_reset,
335 .get_link_ksettings = phy_ethtool_get_link_ksettings,
336 .set_link_ksettings = phy_ethtool_set_link_ksettings,
337 .self_test = net_selftest,
338 .get_strings = ax88772_ethtool_get_strings,
339 .get_sset_count = ax88772_ethtool_get_sset_count,
340 .get_pauseparam = ax88772_ethtool_get_pauseparam,
341 .set_pauseparam = ax88772_ethtool_set_pauseparam,
342};
343
344static int ax88772_reset(struct usbnet *dev)
345{
346 struct asix_data *data = (struct asix_data *)&dev->data;
347 struct asix_common_private *priv = dev->driver_priv;
348 int ret;
349
350 /* Rewrite MAC address */
351 ether_addr_copy(data->mac_addr, dev->net->dev_addr);
352 ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0,
353 ETH_ALEN, data->mac_addr, 0);
354 if (ret < 0)
355 goto out;
356
357 /* Set RX_CTL to default values with 2k buffer, and enable cactus */
358 ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL, 0);
359 if (ret < 0)
360 goto out;
361
362 ret = asix_write_medium_mode(dev, AX88772_MEDIUM_DEFAULT, 0);
363 if (ret < 0)
364 goto out;
365
366 phylink_start(priv->phylink);
367
368 return 0;
369
370out:
371 return ret;
372}
373
374static int ax88772_hw_reset(struct usbnet *dev, int in_pm)
375{
376 struct asix_data *data = (struct asix_data *)&dev->data;
377 struct asix_common_private *priv = dev->driver_priv;
378 u16 rx_ctl;
379 int ret;
380
381 ret = asix_write_gpio(dev, AX_GPIO_RSE | AX_GPIO_GPO_2 |
382 AX_GPIO_GPO2EN, 5, in_pm);
383 if (ret < 0)
384 goto out;
385
386 ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, priv->embd_phy,
387 0, 0, NULL, in_pm);
388 if (ret < 0) {
389 netdev_dbg(dev->net, "Select PHY #1 failed: %d\n", ret);
390 goto out;
391 }
392
393 if (priv->embd_phy) {
394 ret = asix_sw_reset(dev, AX_SWRESET_IPPD, in_pm);
395 if (ret < 0)
396 goto out;
397
398 usleep_range(10000, 11000);
399
400 ret = asix_sw_reset(dev, AX_SWRESET_CLEAR, in_pm);
401 if (ret < 0)
402 goto out;
403
404 msleep(60);
405
406 ret = asix_sw_reset(dev, AX_SWRESET_IPRL | AX_SWRESET_PRL,
407 in_pm);
408 if (ret < 0)
409 goto out;
410 } else {
411 ret = asix_sw_reset(dev, AX_SWRESET_IPPD | AX_SWRESET_PRL,
412 in_pm);
413 if (ret < 0)
414 goto out;
415 }
416
417 msleep(150);
418
419 if (in_pm && (!asix_mdio_read_nopm(dev->net, dev->mii.phy_id,
420 MII_PHYSID1))){
421 ret = -EIO;
422 goto out;
423 }
424
425 ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL, in_pm);
426 if (ret < 0)
427 goto out;
428
429 ret = asix_write_medium_mode(dev, AX88772_MEDIUM_DEFAULT, in_pm);
430 if (ret < 0)
431 goto out;
432
433 ret = asix_write_cmd(dev, AX_CMD_WRITE_IPG0,
434 AX88772_IPG0_DEFAULT | AX88772_IPG1_DEFAULT,
435 AX88772_IPG2_DEFAULT, 0, NULL, in_pm);
436 if (ret < 0) {
437 netdev_dbg(dev->net, "Write IPG,IPG1,IPG2 failed: %d\n", ret);
438 goto out;
439 }
440
441 /* Rewrite MAC address */
442 ether_addr_copy(data->mac_addr, dev->net->dev_addr);
443 ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0,
444 ETH_ALEN, data->mac_addr, in_pm);
445 if (ret < 0)
446 goto out;
447
448 /* Set RX_CTL to default values with 2k buffer, and enable cactus */
449 ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL, in_pm);
450 if (ret < 0)
451 goto out;
452
453 rx_ctl = asix_read_rx_ctl(dev, in_pm);
454 netdev_dbg(dev->net, "RX_CTL is 0x%04x after all initializations\n",
455 rx_ctl);
456
457 rx_ctl = asix_read_medium_status(dev, in_pm);
458 netdev_dbg(dev->net,
459 "Medium Status is 0x%04x after all initializations\n",
460 rx_ctl);
461
462 return 0;
463
464out:
465 return ret;
466}
467
468static int ax88772a_hw_reset(struct usbnet *dev, int in_pm)
469{
470 struct asix_data *data = (struct asix_data *)&dev->data;
471 struct asix_common_private *priv = dev->driver_priv;
472 u16 rx_ctl, phy14h, phy15h, phy16h;
473 int ret;
474
475 ret = asix_write_gpio(dev, AX_GPIO_RSE, 5, in_pm);
476 if (ret < 0)
477 goto out;
478
479 ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, priv->embd_phy |
480 AX_PHYSEL_SSEN, 0, 0, NULL, in_pm);
481 if (ret < 0) {
482 netdev_dbg(dev->net, "Select PHY #1 failed: %d\n", ret);
483 goto out;
484 }
485 usleep_range(10000, 11000);
486
487 ret = asix_sw_reset(dev, AX_SWRESET_IPPD | AX_SWRESET_IPRL, in_pm);
488 if (ret < 0)
489 goto out;
490
491 usleep_range(10000, 11000);
492
493 ret = asix_sw_reset(dev, AX_SWRESET_IPRL, in_pm);
494 if (ret < 0)
495 goto out;
496
497 msleep(160);
498
499 ret = asix_sw_reset(dev, AX_SWRESET_CLEAR, in_pm);
500 if (ret < 0)
501 goto out;
502
503 ret = asix_sw_reset(dev, AX_SWRESET_IPRL, in_pm);
504 if (ret < 0)
505 goto out;
506
507 msleep(200);
508
509 if (in_pm && (!asix_mdio_read_nopm(dev->net, dev->mii.phy_id,
510 MII_PHYSID1))) {
511 ret = -1;
512 goto out;
513 }
514
515 if (priv->chipcode == AX_AX88772B_CHIPCODE) {
516 ret = asix_write_cmd(dev, AX_QCTCTRL, 0x8000, 0x8001,
517 0, NULL, in_pm);
518 if (ret < 0) {
519 netdev_dbg(dev->net, "Write BQ setting failed: %d\n",
520 ret);
521 goto out;
522 }
523 } else if (priv->chipcode == AX_AX88772A_CHIPCODE) {
524 /* Check if the PHY registers have default settings */
525 phy14h = asix_mdio_read_nopm(dev->net, dev->mii.phy_id,
526 AX88772A_PHY14H);
527 phy15h = asix_mdio_read_nopm(dev->net, dev->mii.phy_id,
528 AX88772A_PHY15H);
529 phy16h = asix_mdio_read_nopm(dev->net, dev->mii.phy_id,
530 AX88772A_PHY16H);
531
532 netdev_dbg(dev->net,
533 "772a_hw_reset: MR20=0x%x MR21=0x%x MR22=0x%x\n",
534 phy14h, phy15h, phy16h);
535
536 /* Restore PHY registers default setting if not */
537 if (phy14h != AX88772A_PHY14H_DEFAULT)
538 asix_mdio_write_nopm(dev->net, dev->mii.phy_id,
539 AX88772A_PHY14H,
540 AX88772A_PHY14H_DEFAULT);
541 if (phy15h != AX88772A_PHY15H_DEFAULT)
542 asix_mdio_write_nopm(dev->net, dev->mii.phy_id,
543 AX88772A_PHY15H,
544 AX88772A_PHY15H_DEFAULT);
545 if (phy16h != AX88772A_PHY16H_DEFAULT)
546 asix_mdio_write_nopm(dev->net, dev->mii.phy_id,
547 AX88772A_PHY16H,
548 AX88772A_PHY16H_DEFAULT);
549 }
550
551 ret = asix_write_cmd(dev, AX_CMD_WRITE_IPG0,
552 AX88772_IPG0_DEFAULT | AX88772_IPG1_DEFAULT,
553 AX88772_IPG2_DEFAULT, 0, NULL, in_pm);
554 if (ret < 0) {
555 netdev_dbg(dev->net, "Write IPG,IPG1,IPG2 failed: %d\n", ret);
556 goto out;
557 }
558
559 /* Rewrite MAC address */
560 memcpy(data->mac_addr, dev->net->dev_addr, ETH_ALEN);
561 ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN,
562 data->mac_addr, in_pm);
563 if (ret < 0)
564 goto out;
565
566 /* Set RX_CTL to default values with 2k buffer, and enable cactus */
567 ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL, in_pm);
568 if (ret < 0)
569 goto out;
570
571 ret = asix_write_medium_mode(dev, AX88772_MEDIUM_DEFAULT, in_pm);
572 if (ret < 0)
573 return ret;
574
575 /* Set RX_CTL to default values with 2k buffer, and enable cactus */
576 ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL, in_pm);
577 if (ret < 0)
578 goto out;
579
580 rx_ctl = asix_read_rx_ctl(dev, in_pm);
581 netdev_dbg(dev->net, "RX_CTL is 0x%04x after all initializations\n",
582 rx_ctl);
583
584 rx_ctl = asix_read_medium_status(dev, in_pm);
585 netdev_dbg(dev->net,
586 "Medium Status is 0x%04x after all initializations\n",
587 rx_ctl);
588
589 return 0;
590
591out:
592 return ret;
593}
594
595static const struct net_device_ops ax88772_netdev_ops = {
596 .ndo_open = usbnet_open,
597 .ndo_stop = usbnet_stop,
598 .ndo_start_xmit = usbnet_start_xmit,
599 .ndo_tx_timeout = usbnet_tx_timeout,
600 .ndo_change_mtu = usbnet_change_mtu,
601 .ndo_get_stats64 = dev_get_tstats64,
602 .ndo_set_mac_address = asix_set_mac_address,
603 .ndo_validate_addr = eth_validate_addr,
604 .ndo_eth_ioctl = phy_do_ioctl_running,
605 .ndo_set_rx_mode = asix_set_multicast,
606};
607
608static void ax88772_suspend(struct usbnet *dev)
609{
610 struct asix_common_private *priv = dev->driver_priv;
611 u16 medium;
612
613 if (netif_running(dev->net)) {
614 rtnl_lock();
615 phylink_suspend(priv->phylink, false);
616 rtnl_unlock();
617 }
618
619 /* Stop MAC operation */
620 medium = asix_read_medium_status(dev, 1);
621 medium &= ~AX_MEDIUM_RE;
622 asix_write_medium_mode(dev, medium, 1);
623
624 netdev_dbg(dev->net, "ax88772_suspend: medium=0x%04x\n",
625 asix_read_medium_status(dev, 1));
626}
627
628static int asix_suspend(struct usb_interface *intf, pm_message_t message)
629{
630 struct usbnet *dev = usb_get_intfdata(intf);
631 struct asix_common_private *priv = dev->driver_priv;
632
633 if (priv && priv->suspend)
634 priv->suspend(dev);
635
636 return usbnet_suspend(intf, message);
637}
638
639static void ax88772_resume(struct usbnet *dev)
640{
641 struct asix_common_private *priv = dev->driver_priv;
642 int i;
643
644 for (i = 0; i < 3; i++)
645 if (!priv->reset(dev, 1))
646 break;
647
648 if (netif_running(dev->net)) {
649 rtnl_lock();
650 phylink_resume(priv->phylink);
651 rtnl_unlock();
652 }
653}
654
655static int asix_resume(struct usb_interface *intf)
656{
657 struct usbnet *dev = usb_get_intfdata(intf);
658 struct asix_common_private *priv = dev->driver_priv;
659
660 if (priv && priv->resume)
661 priv->resume(dev);
662
663 return usbnet_resume(intf);
664}
665
666static int ax88772_init_mdio(struct usbnet *dev)
667{
668 struct asix_common_private *priv = dev->driver_priv;
669 int ret;
670
671 priv->mdio = mdiobus_alloc();
672 if (!priv->mdio)
673 return -ENOMEM;
674
675 priv->mdio->priv = dev;
676 priv->mdio->read = &asix_mdio_bus_read;
677 priv->mdio->write = &asix_mdio_bus_write;
678 priv->mdio->name = "Asix MDIO Bus";
679 /* mii bus name is usb-<usb bus number>-<usb device number> */
680 snprintf(priv->mdio->id, MII_BUS_ID_SIZE, "usb-%03d:%03d",
681 dev->udev->bus->busnum, dev->udev->devnum);
682
683 ret = mdiobus_register(priv->mdio);
684 if (ret) {
685 netdev_err(dev->net, "Could not register MDIO bus (err %d)\n", ret);
686 mdiobus_free(priv->mdio);
687 priv->mdio = NULL;
688 }
689
690 return ret;
691}
692
693static void ax88772_mdio_unregister(struct asix_common_private *priv)
694{
695 mdiobus_unregister(priv->mdio);
696 mdiobus_free(priv->mdio);
697}
698
699static int ax88772_init_phy(struct usbnet *dev)
700{
701 struct asix_common_private *priv = dev->driver_priv;
702 int ret;
703
704 priv->phydev = mdiobus_get_phy(priv->mdio, priv->phy_addr);
705 if (!priv->phydev) {
706 netdev_err(dev->net, "Could not find PHY\n");
707 return -ENODEV;
708 }
709
710 ret = phylink_connect_phy(priv->phylink, priv->phydev);
711 if (ret) {
712 netdev_err(dev->net, "Could not connect PHY\n");
713 return ret;
714 }
715
716 phy_suspend(priv->phydev);
717 priv->phydev->mac_managed_pm = true;
718
719 phy_attached_info(priv->phydev);
720
721 if (priv->embd_phy)
722 return 0;
723
724 /* In case main PHY is not the embedded PHY and MAC is RMII clock
725 * provider, we need to suspend embedded PHY by keeping PLL enabled
726 * (AX_SWRESET_IPPD == 0).
727 */
728 priv->phydev_int = mdiobus_get_phy(priv->mdio, AX_EMBD_PHY_ADDR);
729 if (!priv->phydev_int) {
730 rtnl_lock();
731 phylink_disconnect_phy(priv->phylink);
732 rtnl_unlock();
733 netdev_err(dev->net, "Could not find internal PHY\n");
734 return -ENODEV;
735 }
736
737 priv->phydev_int->mac_managed_pm = true;
738 phy_suspend(priv->phydev_int);
739
740 return 0;
741}
742
743static void ax88772_mac_config(struct phylink_config *config, unsigned int mode,
744 const struct phylink_link_state *state)
745{
746 /* Nothing to do */
747}
748
749static void ax88772_mac_link_down(struct phylink_config *config,
750 unsigned int mode, phy_interface_t interface)
751{
752 struct usbnet *dev = netdev_priv(to_net_dev(config->dev));
753
754 asix_write_medium_mode(dev, 0, 0);
755 usbnet_link_change(dev, false, false);
756}
757
758static void ax88772_mac_link_up(struct phylink_config *config,
759 struct phy_device *phy,
760 unsigned int mode, phy_interface_t interface,
761 int speed, int duplex,
762 bool tx_pause, bool rx_pause)
763{
764 struct usbnet *dev = netdev_priv(to_net_dev(config->dev));
765 u16 m = AX_MEDIUM_AC | AX_MEDIUM_RE;
766
767 m |= duplex ? AX_MEDIUM_FD : 0;
768
769 switch (speed) {
770 case SPEED_100:
771 m |= AX_MEDIUM_PS;
772 break;
773 case SPEED_10:
774 break;
775 default:
776 return;
777 }
778
779 if (tx_pause)
780 m |= AX_MEDIUM_TFC;
781
782 if (rx_pause)
783 m |= AX_MEDIUM_RFC;
784
785 asix_write_medium_mode(dev, m, 0);
786 usbnet_link_change(dev, true, false);
787}
788
789static const struct phylink_mac_ops ax88772_phylink_mac_ops = {
790 .mac_config = ax88772_mac_config,
791 .mac_link_down = ax88772_mac_link_down,
792 .mac_link_up = ax88772_mac_link_up,
793};
794
795static int ax88772_phylink_setup(struct usbnet *dev)
796{
797 struct asix_common_private *priv = dev->driver_priv;
798 phy_interface_t phy_if_mode;
799 struct phylink *phylink;
800
801 priv->phylink_config.dev = &dev->net->dev;
802 priv->phylink_config.type = PHYLINK_NETDEV;
803 priv->phylink_config.mac_capabilities = MAC_SYM_PAUSE | MAC_ASYM_PAUSE |
804 MAC_10 | MAC_100;
805
806 __set_bit(PHY_INTERFACE_MODE_INTERNAL,
807 priv->phylink_config.supported_interfaces);
808 __set_bit(PHY_INTERFACE_MODE_RMII,
809 priv->phylink_config.supported_interfaces);
810
811 if (priv->embd_phy)
812 phy_if_mode = PHY_INTERFACE_MODE_INTERNAL;
813 else
814 phy_if_mode = PHY_INTERFACE_MODE_RMII;
815
816 phylink = phylink_create(&priv->phylink_config, dev->net->dev.fwnode,
817 phy_if_mode, &ax88772_phylink_mac_ops);
818 if (IS_ERR(phylink))
819 return PTR_ERR(phylink);
820
821 priv->phylink = phylink;
822 return 0;
823}
824
825static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
826{
827 struct asix_common_private *priv;
828 u8 buf[ETH_ALEN] = {0};
829 int ret, i;
830
831 priv = devm_kzalloc(&dev->udev->dev, sizeof(*priv), GFP_KERNEL);
832 if (!priv)
833 return -ENOMEM;
834
835 dev->driver_priv = priv;
836
837 usbnet_get_endpoints(dev, intf);
838
839 /* Maybe the boot loader passed the MAC address via device tree */
840 if (!eth_platform_get_mac_address(&dev->udev->dev, buf)) {
841 netif_dbg(dev, ifup, dev->net,
842 "MAC address read from device tree");
843 } else {
844 /* Try getting the MAC address from EEPROM */
845 if (dev->driver_info->data & FLAG_EEPROM_MAC) {
846 for (i = 0; i < (ETH_ALEN >> 1); i++) {
847 ret = asix_read_cmd(dev, AX_CMD_READ_EEPROM,
848 0x04 + i, 0, 2, buf + i * 2,
849 0);
850 if (ret < 0)
851 break;
852 }
853 } else {
854 ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID,
855 0, 0, ETH_ALEN, buf, 0);
856 }
857
858 if (ret < 0) {
859 netdev_dbg(dev->net, "Failed to read MAC address: %d\n",
860 ret);
861 return ret;
862 }
863 }
864
865 asix_set_netdev_dev_addr(dev, buf);
866
867 dev->net->netdev_ops = &ax88772_netdev_ops;
868 dev->net->ethtool_ops = &ax88772_ethtool_ops;
869 dev->net->needed_headroom = 4; /* cf asix_tx_fixup() */
870 dev->net->needed_tailroom = 4; /* cf asix_tx_fixup() */
871
872 ret = asix_read_phy_addr(dev, true);
873 if (ret < 0)
874 return ret;
875
876 priv->phy_addr = ret;
877 priv->embd_phy = ((priv->phy_addr & 0x1f) == AX_EMBD_PHY_ADDR);
878
879 ret = asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, 0, 0, 1,
880 &priv->chipcode, 0);
881 if (ret < 0) {
882 netdev_dbg(dev->net, "Failed to read STATMNGSTS_REG: %d\n", ret);
883 return ret;
884 }
885
886 priv->chipcode &= AX_CHIPCODE_MASK;
887
888 priv->resume = ax88772_resume;
889 priv->suspend = ax88772_suspend;
890 if (priv->chipcode == AX_AX88772_CHIPCODE)
891 priv->reset = ax88772_hw_reset;
892 else
893 priv->reset = ax88772a_hw_reset;
894
895 ret = priv->reset(dev, 0);
896 if (ret < 0) {
897 netdev_dbg(dev->net, "Failed to reset AX88772: %d\n", ret);
898 return ret;
899 }
900
901 /* Asix framing packs multiple eth frames into a 2K usb bulk transfer */
902 if (dev->driver_info->flags & FLAG_FRAMING_AX) {
903 /* hard_mtu is still the default - the device does not support
904 jumbo eth frames */
905 dev->rx_urb_size = 2048;
906 }
907
908 priv->presvd_phy_bmcr = 0;
909 priv->presvd_phy_advertise = 0;
910
911 ret = ax88772_init_mdio(dev);
912 if (ret)
913 goto mdio_err;
914
915 ret = ax88772_phylink_setup(dev);
916 if (ret)
917 goto phylink_err;
918
919 ret = ax88772_init_phy(dev);
920 if (ret)
921 goto initphy_err;
922
923 return 0;
924
925initphy_err:
926 phylink_destroy(priv->phylink);
927phylink_err:
928 ax88772_mdio_unregister(priv);
929mdio_err:
930 return ret;
931}
932
933static int ax88772_stop(struct usbnet *dev)
934{
935 struct asix_common_private *priv = dev->driver_priv;
936
937 phylink_stop(priv->phylink);
938
939 return 0;
940}
941
942static void ax88772_unbind(struct usbnet *dev, struct usb_interface *intf)
943{
944 struct asix_common_private *priv = dev->driver_priv;
945
946 rtnl_lock();
947 phylink_disconnect_phy(priv->phylink);
948 rtnl_unlock();
949 phylink_destroy(priv->phylink);
950 ax88772_mdio_unregister(priv);
951 asix_rx_fixup_common_free(dev->driver_priv);
952}
953
954static void ax88178_unbind(struct usbnet *dev, struct usb_interface *intf)
955{
956 asix_rx_fixup_common_free(dev->driver_priv);
957 kfree(dev->driver_priv);
958}
959
960static const struct ethtool_ops ax88178_ethtool_ops = {
961 .get_drvinfo = asix_get_drvinfo,
962 .get_link = asix_get_link,
963 .get_msglevel = usbnet_get_msglevel,
964 .set_msglevel = usbnet_set_msglevel,
965 .get_wol = asix_get_wol,
966 .set_wol = asix_set_wol,
967 .get_eeprom_len = asix_get_eeprom_len,
968 .get_eeprom = asix_get_eeprom,
969 .set_eeprom = asix_set_eeprom,
970 .nway_reset = usbnet_nway_reset,
971 .get_link_ksettings = usbnet_get_link_ksettings_mii,
972 .set_link_ksettings = usbnet_set_link_ksettings_mii,
973};
974
975static int marvell_phy_init(struct usbnet *dev)
976{
977 struct asix_data *data = (struct asix_data *)&dev->data;
978 u16 reg;
979
980 netdev_dbg(dev->net, "marvell_phy_init()\n");
981
982 reg = asix_mdio_read(dev->net, dev->mii.phy_id, MII_MARVELL_STATUS);
983 netdev_dbg(dev->net, "MII_MARVELL_STATUS = 0x%04x\n", reg);
984
985 asix_mdio_write(dev->net, dev->mii.phy_id, MII_MARVELL_CTRL,
986 MARVELL_CTRL_RXDELAY | MARVELL_CTRL_TXDELAY);
987
988 if (data->ledmode) {
989 reg = asix_mdio_read(dev->net, dev->mii.phy_id,
990 MII_MARVELL_LED_CTRL);
991 netdev_dbg(dev->net, "MII_MARVELL_LED_CTRL (1) = 0x%04x\n", reg);
992
993 reg &= 0xf8ff;
994 reg |= (1 + 0x0100);
995 asix_mdio_write(dev->net, dev->mii.phy_id,
996 MII_MARVELL_LED_CTRL, reg);
997
998 reg = asix_mdio_read(dev->net, dev->mii.phy_id,
999 MII_MARVELL_LED_CTRL);
1000 netdev_dbg(dev->net, "MII_MARVELL_LED_CTRL (2) = 0x%04x\n", reg);
1001 }
1002
1003 return 0;
1004}
1005
1006static int rtl8211cl_phy_init(struct usbnet *dev)
1007{
1008 struct asix_data *data = (struct asix_data *)&dev->data;
1009
1010 netdev_dbg(dev->net, "rtl8211cl_phy_init()\n");
1011
1012 asix_mdio_write (dev->net, dev->mii.phy_id, 0x1f, 0x0005);
1013 asix_mdio_write (dev->net, dev->mii.phy_id, 0x0c, 0);
1014 asix_mdio_write (dev->net, dev->mii.phy_id, 0x01,
1015 asix_mdio_read (dev->net, dev->mii.phy_id, 0x01) | 0x0080);
1016 asix_mdio_write (dev->net, dev->mii.phy_id, 0x1f, 0);
1017
1018 if (data->ledmode == 12) {
1019 asix_mdio_write (dev->net, dev->mii.phy_id, 0x1f, 0x0002);
1020 asix_mdio_write (dev->net, dev->mii.phy_id, 0x1a, 0x00cb);
1021 asix_mdio_write (dev->net, dev->mii.phy_id, 0x1f, 0);
1022 }
1023
1024 return 0;
1025}
1026
1027static int marvell_led_status(struct usbnet *dev, u16 speed)
1028{
1029 u16 reg = asix_mdio_read(dev->net, dev->mii.phy_id, MARVELL_LED_MANUAL);
1030
1031 netdev_dbg(dev->net, "marvell_led_status() read 0x%04x\n", reg);
1032
1033 /* Clear out the center LED bits - 0x03F0 */
1034 reg &= 0xfc0f;
1035
1036 switch (speed) {
1037 case SPEED_1000:
1038 reg |= 0x03e0;
1039 break;
1040 case SPEED_100:
1041 reg |= 0x03b0;
1042 break;
1043 default:
1044 reg |= 0x02f0;
1045 }
1046
1047 netdev_dbg(dev->net, "marvell_led_status() writing 0x%04x\n", reg);
1048 asix_mdio_write(dev->net, dev->mii.phy_id, MARVELL_LED_MANUAL, reg);
1049
1050 return 0;
1051}
1052
1053static int ax88178_reset(struct usbnet *dev)
1054{
1055 struct asix_data *data = (struct asix_data *)&dev->data;
1056 int ret;
1057 __le16 eeprom;
1058 u8 status;
1059 int gpio0 = 0;
1060 u32 phyid;
1061
1062 ret = asix_read_cmd(dev, AX_CMD_READ_GPIOS, 0, 0, 1, &status, 0);
1063 if (ret < 0) {
1064 netdev_dbg(dev->net, "Failed to read GPIOS: %d\n", ret);
1065 return ret;
1066 }
1067
1068 netdev_dbg(dev->net, "GPIO Status: 0x%04x\n", status);
1069
1070 asix_write_cmd(dev, AX_CMD_WRITE_ENABLE, 0, 0, 0, NULL, 0);
1071 ret = asix_read_cmd(dev, AX_CMD_READ_EEPROM, 0x0017, 0, 2, &eeprom, 0);
1072 if (ret < 0) {
1073 netdev_dbg(dev->net, "Failed to read EEPROM: %d\n", ret);
1074 return ret;
1075 }
1076
1077 asix_write_cmd(dev, AX_CMD_WRITE_DISABLE, 0, 0, 0, NULL, 0);
1078
1079 netdev_dbg(dev->net, "EEPROM index 0x17 is 0x%04x\n", eeprom);
1080
1081 if (eeprom == cpu_to_le16(0xffff)) {
1082 data->phymode = PHY_MODE_MARVELL;
1083 data->ledmode = 0;
1084 gpio0 = 1;
1085 } else {
1086 data->phymode = le16_to_cpu(eeprom) & 0x7F;
1087 data->ledmode = le16_to_cpu(eeprom) >> 8;
1088 gpio0 = (le16_to_cpu(eeprom) & 0x80) ? 0 : 1;
1089 }
1090 netdev_dbg(dev->net, "GPIO0: %d, PhyMode: %d\n", gpio0, data->phymode);
1091
1092 /* Power up external GigaPHY through AX88178 GPIO pin */
1093 asix_write_gpio(dev, AX_GPIO_RSE | AX_GPIO_GPO_1 |
1094 AX_GPIO_GPO1EN, 40, 0);
1095 if ((le16_to_cpu(eeprom) >> 8) != 1) {
1096 asix_write_gpio(dev, 0x003c, 30, 0);
1097 asix_write_gpio(dev, 0x001c, 300, 0);
1098 asix_write_gpio(dev, 0x003c, 30, 0);
1099 } else {
1100 netdev_dbg(dev->net, "gpio phymode == 1 path\n");
1101 asix_write_gpio(dev, AX_GPIO_GPO1EN, 30, 0);
1102 asix_write_gpio(dev, AX_GPIO_GPO1EN | AX_GPIO_GPO_1, 30, 0);
1103 }
1104
1105 /* Read PHYID register *AFTER* powering up PHY */
1106 phyid = asix_get_phyid(dev);
1107 netdev_dbg(dev->net, "PHYID=0x%08x\n", phyid);
1108
1109 /* Set AX88178 to enable MII/GMII/RGMII interface for external PHY */
1110 asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, 0, 0, 0, NULL, 0);
1111
1112 asix_sw_reset(dev, 0, 0);
1113 msleep(150);
1114
1115 asix_sw_reset(dev, AX_SWRESET_PRL | AX_SWRESET_IPPD, 0);
1116 msleep(150);
1117
1118 asix_write_rx_ctl(dev, 0, 0);
1119
1120 if (data->phymode == PHY_MODE_MARVELL) {
1121 marvell_phy_init(dev);
1122 msleep(60);
1123 } else if (data->phymode == PHY_MODE_RTL8211CL)
1124 rtl8211cl_phy_init(dev);
1125
1126 asix_phy_reset(dev, BMCR_RESET | BMCR_ANENABLE);
1127 asix_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
1128 ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP);
1129 asix_mdio_write(dev->net, dev->mii.phy_id, MII_CTRL1000,
1130 ADVERTISE_1000FULL);
1131
1132 asix_write_medium_mode(dev, AX88178_MEDIUM_DEFAULT, 0);
1133 mii_nway_restart(&dev->mii);
1134
1135 /* Rewrite MAC address */
1136 memcpy(data->mac_addr, dev->net->dev_addr, ETH_ALEN);
1137 ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN,
1138 data->mac_addr, 0);
1139 if (ret < 0)
1140 return ret;
1141
1142 ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL, 0);
1143 if (ret < 0)
1144 return ret;
1145
1146 return 0;
1147}
1148
1149static int ax88178_link_reset(struct usbnet *dev)
1150{
1151 u16 mode;
1152 struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET };
1153 struct asix_data *data = (struct asix_data *)&dev->data;
1154 u32 speed;
1155
1156 netdev_dbg(dev->net, "ax88178_link_reset()\n");
1157
1158 mii_check_media(&dev->mii, 1, 1);
1159 mii_ethtool_gset(&dev->mii, &ecmd);
1160 mode = AX88178_MEDIUM_DEFAULT;
1161 speed = ethtool_cmd_speed(&ecmd);
1162
1163 if (speed == SPEED_1000)
1164 mode |= AX_MEDIUM_GM;
1165 else if (speed == SPEED_100)
1166 mode |= AX_MEDIUM_PS;
1167 else
1168 mode &= ~(AX_MEDIUM_PS | AX_MEDIUM_GM);
1169
1170 mode |= AX_MEDIUM_ENCK;
1171
1172 if (ecmd.duplex == DUPLEX_FULL)
1173 mode |= AX_MEDIUM_FD;
1174 else
1175 mode &= ~AX_MEDIUM_FD;
1176
1177 netdev_dbg(dev->net, "ax88178_link_reset() speed: %u duplex: %d setting mode to 0x%04x\n",
1178 speed, ecmd.duplex, mode);
1179
1180 asix_write_medium_mode(dev, mode, 0);
1181
1182 if (data->phymode == PHY_MODE_MARVELL && data->ledmode)
1183 marvell_led_status(dev, speed);
1184
1185 return 0;
1186}
1187
1188static void ax88178_set_mfb(struct usbnet *dev)
1189{
1190 u16 mfb = AX_RX_CTL_MFB_16384;
1191 u16 rxctl;
1192 u16 medium;
1193 int old_rx_urb_size = dev->rx_urb_size;
1194
1195 if (dev->hard_mtu < 2048) {
1196 dev->rx_urb_size = 2048;
1197 mfb = AX_RX_CTL_MFB_2048;
1198 } else if (dev->hard_mtu < 4096) {
1199 dev->rx_urb_size = 4096;
1200 mfb = AX_RX_CTL_MFB_4096;
1201 } else if (dev->hard_mtu < 8192) {
1202 dev->rx_urb_size = 8192;
1203 mfb = AX_RX_CTL_MFB_8192;
1204 } else if (dev->hard_mtu < 16384) {
1205 dev->rx_urb_size = 16384;
1206 mfb = AX_RX_CTL_MFB_16384;
1207 }
1208
1209 rxctl = asix_read_rx_ctl(dev, 0);
1210 asix_write_rx_ctl(dev, (rxctl & ~AX_RX_CTL_MFB_16384) | mfb, 0);
1211
1212 medium = asix_read_medium_status(dev, 0);
1213 if (dev->net->mtu > 1500)
1214 medium |= AX_MEDIUM_JFE;
1215 else
1216 medium &= ~AX_MEDIUM_JFE;
1217 asix_write_medium_mode(dev, medium, 0);
1218
1219 if (dev->rx_urb_size > old_rx_urb_size)
1220 usbnet_unlink_rx_urbs(dev);
1221}
1222
1223static int ax88178_change_mtu(struct net_device *net, int new_mtu)
1224{
1225 struct usbnet *dev = netdev_priv(net);
1226 int ll_mtu = new_mtu + net->hard_header_len + 4;
1227
1228 netdev_dbg(dev->net, "ax88178_change_mtu() new_mtu=%d\n", new_mtu);
1229
1230 if ((ll_mtu % dev->maxpacket) == 0)
1231 return -EDOM;
1232
1233 net->mtu = new_mtu;
1234 dev->hard_mtu = net->mtu + net->hard_header_len;
1235 ax88178_set_mfb(dev);
1236
1237 /* max qlen depend on hard_mtu and rx_urb_size */
1238 usbnet_update_max_qlen(dev);
1239
1240 return 0;
1241}
1242
1243static const struct net_device_ops ax88178_netdev_ops = {
1244 .ndo_open = usbnet_open,
1245 .ndo_stop = usbnet_stop,
1246 .ndo_start_xmit = usbnet_start_xmit,
1247 .ndo_tx_timeout = usbnet_tx_timeout,
1248 .ndo_get_stats64 = dev_get_tstats64,
1249 .ndo_set_mac_address = asix_set_mac_address,
1250 .ndo_validate_addr = eth_validate_addr,
1251 .ndo_set_rx_mode = asix_set_multicast,
1252 .ndo_eth_ioctl = asix_ioctl,
1253 .ndo_change_mtu = ax88178_change_mtu,
1254};
1255
1256static int ax88178_bind(struct usbnet *dev, struct usb_interface *intf)
1257{
1258 int ret;
1259 u8 buf[ETH_ALEN] = {0};
1260
1261 usbnet_get_endpoints(dev,intf);
1262
1263 /* Get the MAC address */
1264 ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf, 0);
1265 if (ret < 0) {
1266 netdev_dbg(dev->net, "Failed to read MAC address: %d\n", ret);
1267 return ret;
1268 }
1269
1270 asix_set_netdev_dev_addr(dev, buf);
1271
1272 /* Initialize MII structure */
1273 dev->mii.dev = dev->net;
1274 dev->mii.mdio_read = asix_mdio_read;
1275 dev->mii.mdio_write = asix_mdio_write;
1276 dev->mii.phy_id_mask = 0x1f;
1277 dev->mii.reg_num_mask = 0xff;
1278 dev->mii.supports_gmii = 1;
1279
1280 dev->mii.phy_id = asix_read_phy_addr(dev, true);
1281 if (dev->mii.phy_id < 0)
1282 return dev->mii.phy_id;
1283
1284 dev->net->netdev_ops = &ax88178_netdev_ops;
1285 dev->net->ethtool_ops = &ax88178_ethtool_ops;
1286 dev->net->max_mtu = 16384 - (dev->net->hard_header_len + 4);
1287
1288 /* Blink LEDS so users know driver saw dongle */
1289 asix_sw_reset(dev, 0, 0);
1290 msleep(150);
1291
1292 asix_sw_reset(dev, AX_SWRESET_PRL | AX_SWRESET_IPPD, 0);
1293 msleep(150);
1294
1295 /* Asix framing packs multiple eth frames into a 2K usb bulk transfer */
1296 if (dev->driver_info->flags & FLAG_FRAMING_AX) {
1297 /* hard_mtu is still the default - the device does not support
1298 jumbo eth frames */
1299 dev->rx_urb_size = 2048;
1300 }
1301
1302 dev->driver_priv = kzalloc(sizeof(struct asix_common_private), GFP_KERNEL);
1303 if (!dev->driver_priv)
1304 return -ENOMEM;
1305
1306 return 0;
1307}
1308
1309static const struct driver_info ax8817x_info = {
1310 .description = "ASIX AX8817x USB 2.0 Ethernet",
1311 .bind = ax88172_bind,
1312 .status = asix_status,
1313 .link_reset = ax88172_link_reset,
1314 .reset = ax88172_link_reset,
1315 .flags = FLAG_ETHER | FLAG_LINK_INTR,
1316 .data = 0x00130103,
1317};
1318
1319static const struct driver_info dlink_dub_e100_info = {
1320 .description = "DLink DUB-E100 USB Ethernet",
1321 .bind = ax88172_bind,
1322 .status = asix_status,
1323 .link_reset = ax88172_link_reset,
1324 .reset = ax88172_link_reset,
1325 .flags = FLAG_ETHER | FLAG_LINK_INTR,
1326 .data = 0x009f9d9f,
1327};
1328
1329static const struct driver_info netgear_fa120_info = {
1330 .description = "Netgear FA-120 USB Ethernet",
1331 .bind = ax88172_bind,
1332 .status = asix_status,
1333 .link_reset = ax88172_link_reset,
1334 .reset = ax88172_link_reset,
1335 .flags = FLAG_ETHER | FLAG_LINK_INTR,
1336 .data = 0x00130103,
1337};
1338
1339static const struct driver_info hawking_uf200_info = {
1340 .description = "Hawking UF200 USB Ethernet",
1341 .bind = ax88172_bind,
1342 .status = asix_status,
1343 .link_reset = ax88172_link_reset,
1344 .reset = ax88172_link_reset,
1345 .flags = FLAG_ETHER | FLAG_LINK_INTR,
1346 .data = 0x001f1d1f,
1347};
1348
1349static const struct driver_info ax88772_info = {
1350 .description = "ASIX AX88772 USB 2.0 Ethernet",
1351 .bind = ax88772_bind,
1352 .unbind = ax88772_unbind,
1353 .status = asix_status,
1354 .reset = ax88772_reset,
1355 .stop = ax88772_stop,
1356 .flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR | FLAG_MULTI_PACKET,
1357 .rx_fixup = asix_rx_fixup_common,
1358 .tx_fixup = asix_tx_fixup,
1359};
1360
1361static const struct driver_info ax88772b_info = {
1362 .description = "ASIX AX88772B USB 2.0 Ethernet",
1363 .bind = ax88772_bind,
1364 .unbind = ax88772_unbind,
1365 .status = asix_status,
1366 .reset = ax88772_reset,
1367 .stop = ax88772_stop,
1368 .flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR |
1369 FLAG_MULTI_PACKET,
1370 .rx_fixup = asix_rx_fixup_common,
1371 .tx_fixup = asix_tx_fixup,
1372 .data = FLAG_EEPROM_MAC,
1373};
1374
1375static const struct driver_info lxausb_t1l_info = {
1376 .description = "Linux Automation GmbH USB 10Base-T1L",
1377 .bind = ax88772_bind,
1378 .unbind = ax88772_unbind,
1379 .status = asix_status,
1380 .reset = ax88772_reset,
1381 .stop = ax88772_stop,
1382 .flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR |
1383 FLAG_MULTI_PACKET,
1384 .rx_fixup = asix_rx_fixup_common,
1385 .tx_fixup = asix_tx_fixup,
1386 .data = FLAG_EEPROM_MAC,
1387};
1388
1389static const struct driver_info ax88178_info = {
1390 .description = "ASIX AX88178 USB 2.0 Ethernet",
1391 .bind = ax88178_bind,
1392 .unbind = ax88178_unbind,
1393 .status = asix_status,
1394 .link_reset = ax88178_link_reset,
1395 .reset = ax88178_reset,
1396 .flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR |
1397 FLAG_MULTI_PACKET,
1398 .rx_fixup = asix_rx_fixup_common,
1399 .tx_fixup = asix_tx_fixup,
1400};
1401
1402/*
1403 * USBLINK 20F9 "USB 2.0 LAN" USB ethernet adapter, typically found in
1404 * no-name packaging.
1405 * USB device strings are:
1406 * 1: Manufacturer: USBLINK
1407 * 2: Product: HG20F9 USB2.0
1408 * 3: Serial: 000003
1409 * Appears to be compatible with Asix 88772B.
1410 */
1411static const struct driver_info hg20f9_info = {
1412 .description = "HG20F9 USB 2.0 Ethernet",
1413 .bind = ax88772_bind,
1414 .unbind = ax88772_unbind,
1415 .status = asix_status,
1416 .reset = ax88772_reset,
1417 .flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR |
1418 FLAG_MULTI_PACKET,
1419 .rx_fixup = asix_rx_fixup_common,
1420 .tx_fixup = asix_tx_fixup,
1421 .data = FLAG_EEPROM_MAC,
1422};
1423
1424static const struct usb_device_id products [] = {
1425{
1426 // Linksys USB200M
1427 USB_DEVICE (0x077b, 0x2226),
1428 .driver_info = (unsigned long) &ax8817x_info,
1429}, {
1430 // Netgear FA120
1431 USB_DEVICE (0x0846, 0x1040),
1432 .driver_info = (unsigned long) &netgear_fa120_info,
1433}, {
1434 // DLink DUB-E100
1435 USB_DEVICE (0x2001, 0x1a00),
1436 .driver_info = (unsigned long) &dlink_dub_e100_info,
1437}, {
1438 // Intellinet, ST Lab USB Ethernet
1439 USB_DEVICE (0x0b95, 0x1720),
1440 .driver_info = (unsigned long) &ax8817x_info,
1441}, {
1442 // Hawking UF200, TrendNet TU2-ET100
1443 USB_DEVICE (0x07b8, 0x420a),
1444 .driver_info = (unsigned long) &hawking_uf200_info,
1445}, {
1446 // Billionton Systems, USB2AR
1447 USB_DEVICE (0x08dd, 0x90ff),
1448 .driver_info = (unsigned long) &ax8817x_info,
1449}, {
1450 // Billionton Systems, GUSB2AM-1G-B
1451 USB_DEVICE(0x08dd, 0x0114),
1452 .driver_info = (unsigned long) &ax88178_info,
1453}, {
1454 // ATEN UC210T
1455 USB_DEVICE (0x0557, 0x2009),
1456 .driver_info = (unsigned long) &ax8817x_info,
1457}, {
1458 // Buffalo LUA-U2-KTX
1459 USB_DEVICE (0x0411, 0x003d),
1460 .driver_info = (unsigned long) &ax8817x_info,
1461}, {
1462 // Buffalo LUA-U2-GT 10/100/1000
1463 USB_DEVICE (0x0411, 0x006e),
1464 .driver_info = (unsigned long) &ax88178_info,
1465}, {
1466 // Sitecom LN-029 "USB 2.0 10/100 Ethernet adapter"
1467 USB_DEVICE (0x6189, 0x182d),
1468 .driver_info = (unsigned long) &ax8817x_info,
1469}, {
1470 // Sitecom LN-031 "USB 2.0 10/100/1000 Ethernet adapter"
1471 USB_DEVICE (0x0df6, 0x0056),
1472 .driver_info = (unsigned long) &ax88178_info,
1473}, {
1474 // Sitecom LN-028 "USB 2.0 10/100/1000 Ethernet adapter"
1475 USB_DEVICE (0x0df6, 0x061c),
1476 .driver_info = (unsigned long) &ax88178_info,
1477}, {
1478 // corega FEther USB2-TX
1479 USB_DEVICE (0x07aa, 0x0017),
1480 .driver_info = (unsigned long) &ax8817x_info,
1481}, {
1482 // Surecom EP-1427X-2
1483 USB_DEVICE (0x1189, 0x0893),
1484 .driver_info = (unsigned long) &ax8817x_info,
1485}, {
1486 // goodway corp usb gwusb2e
1487 USB_DEVICE (0x1631, 0x6200),
1488 .driver_info = (unsigned long) &ax8817x_info,
1489}, {
1490 // JVC MP-PRX1 Port Replicator
1491 USB_DEVICE (0x04f1, 0x3008),
1492 .driver_info = (unsigned long) &ax8817x_info,
1493}, {
1494 // Lenovo U2L100P 10/100
1495 USB_DEVICE (0x17ef, 0x7203),
1496 .driver_info = (unsigned long)&ax88772b_info,
1497}, {
1498 // ASIX AX88772B 10/100
1499 USB_DEVICE (0x0b95, 0x772b),
1500 .driver_info = (unsigned long) &ax88772b_info,
1501}, {
1502 // ASIX AX88772 10/100
1503 USB_DEVICE (0x0b95, 0x7720),
1504 .driver_info = (unsigned long) &ax88772_info,
1505}, {
1506 // ASIX AX88178 10/100/1000
1507 USB_DEVICE (0x0b95, 0x1780),
1508 .driver_info = (unsigned long) &ax88178_info,
1509}, {
1510 // Logitec LAN-GTJ/U2A
1511 USB_DEVICE (0x0789, 0x0160),
1512 .driver_info = (unsigned long) &ax88178_info,
1513}, {
1514 // Linksys USB200M Rev 2
1515 USB_DEVICE (0x13b1, 0x0018),
1516 .driver_info = (unsigned long) &ax88772_info,
1517}, {
1518 // 0Q0 cable ethernet
1519 USB_DEVICE (0x1557, 0x7720),
1520 .driver_info = (unsigned long) &ax88772_info,
1521}, {
1522 // DLink DUB-E100 H/W Ver B1
1523 USB_DEVICE (0x07d1, 0x3c05),
1524 .driver_info = (unsigned long) &ax88772_info,
1525}, {
1526 // DLink DUB-E100 H/W Ver B1 Alternate
1527 USB_DEVICE (0x2001, 0x3c05),
1528 .driver_info = (unsigned long) &ax88772_info,
1529}, {
1530 // DLink DUB-E100 H/W Ver C1
1531 USB_DEVICE (0x2001, 0x1a02),
1532 .driver_info = (unsigned long) &ax88772_info,
1533}, {
1534 // Linksys USB1000
1535 USB_DEVICE (0x1737, 0x0039),
1536 .driver_info = (unsigned long) &ax88178_info,
1537}, {
1538 // IO-DATA ETG-US2
1539 USB_DEVICE (0x04bb, 0x0930),
1540 .driver_info = (unsigned long) &ax88178_info,
1541}, {
1542 // Belkin F5D5055
1543 USB_DEVICE(0x050d, 0x5055),
1544 .driver_info = (unsigned long) &ax88178_info,
1545}, {
1546 // Apple USB Ethernet Adapter
1547 USB_DEVICE(0x05ac, 0x1402),
1548 .driver_info = (unsigned long) &ax88772_info,
1549}, {
1550 // Cables-to-Go USB Ethernet Adapter
1551 USB_DEVICE(0x0b95, 0x772a),
1552 .driver_info = (unsigned long) &ax88772_info,
1553}, {
1554 // ABOCOM for pci
1555 USB_DEVICE(0x14ea, 0xab11),
1556 .driver_info = (unsigned long) &ax88178_info,
1557}, {
1558 // ASIX 88772a
1559 USB_DEVICE(0x0db0, 0xa877),
1560 .driver_info = (unsigned long) &ax88772_info,
1561}, {
1562 // Asus USB Ethernet Adapter
1563 USB_DEVICE (0x0b95, 0x7e2b),
1564 .driver_info = (unsigned long)&ax88772b_info,
1565}, {
1566 /* ASIX 88172a demo board */
1567 USB_DEVICE(0x0b95, 0x172a),
1568 .driver_info = (unsigned long) &ax88172a_info,
1569}, {
1570 /*
1571 * USBLINK HG20F9 "USB 2.0 LAN"
1572 * Appears to have gazumped Linksys's manufacturer ID but
1573 * doesn't (yet) conflict with any known Linksys product.
1574 */
1575 USB_DEVICE(0x066b, 0x20f9),
1576 .driver_info = (unsigned long) &hg20f9_info,
1577}, {
1578 // Linux Automation GmbH USB 10Base-T1L
1579 USB_DEVICE(0x33f7, 0x0004),
1580 .driver_info = (unsigned long) &lxausb_t1l_info,
1581},
1582 { }, // END
1583};
1584MODULE_DEVICE_TABLE(usb, products);
1585
1586static struct usb_driver asix_driver = {
1587 .name = DRIVER_NAME,
1588 .id_table = products,
1589 .probe = usbnet_probe,
1590 .suspend = asix_suspend,
1591 .resume = asix_resume,
1592 .reset_resume = asix_resume,
1593 .disconnect = usbnet_disconnect,
1594 .supports_autosuspend = 1,
1595 .disable_hub_initiated_lpm = 1,
1596};
1597
1598module_usb_driver(asix_driver);
1599
1600MODULE_AUTHOR("David Hollis");
1601MODULE_VERSION(DRIVER_VERSION);
1602MODULE_DESCRIPTION("ASIX AX8817X based USB 2.0 Ethernet Devices");
1603MODULE_LICENSE("GPL");
1604
1/*
2 * ASIX AX8817X based USB 2.0 Ethernet Devices
3 * Copyright (C) 2003-2006 David Hollis <dhollis@davehollis.com>
4 * Copyright (C) 2005 Phil Chang <pchang23@sbcglobal.net>
5 * Copyright (C) 2006 James Painter <jamie.painter@iname.com>
6 * Copyright (c) 2002-2003 TiVo Inc.
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, see <http://www.gnu.org/licenses/>.
20 */
21
22#include "asix.h"
23
24#define PHY_MODE_MARVELL 0x0000
25#define MII_MARVELL_LED_CTRL 0x0018
26#define MII_MARVELL_STATUS 0x001b
27#define MII_MARVELL_CTRL 0x0014
28
29#define MARVELL_LED_MANUAL 0x0019
30
31#define MARVELL_STATUS_HWCFG 0x0004
32
33#define MARVELL_CTRL_TXDELAY 0x0002
34#define MARVELL_CTRL_RXDELAY 0x0080
35
36#define PHY_MODE_RTL8211CL 0x000C
37
38#define AX88772A_PHY14H 0x14
39#define AX88772A_PHY14H_DEFAULT 0x442C
40
41#define AX88772A_PHY15H 0x15
42#define AX88772A_PHY15H_DEFAULT 0x03C8
43
44#define AX88772A_PHY16H 0x16
45#define AX88772A_PHY16H_DEFAULT 0x4044
46
47struct ax88172_int_data {
48 __le16 res1;
49 u8 link;
50 __le16 res2;
51 u8 status;
52 __le16 res3;
53} __packed;
54
55static void asix_status(struct usbnet *dev, struct urb *urb)
56{
57 struct ax88172_int_data *event;
58 int link;
59
60 if (urb->actual_length < 8)
61 return;
62
63 event = urb->transfer_buffer;
64 link = event->link & 0x01;
65 if (netif_carrier_ok(dev->net) != link) {
66 usbnet_link_change(dev, link, 1);
67 netdev_dbg(dev->net, "Link Status is: %d\n", link);
68 }
69}
70
71static void asix_set_netdev_dev_addr(struct usbnet *dev, u8 *addr)
72{
73 if (is_valid_ether_addr(addr)) {
74 memcpy(dev->net->dev_addr, addr, ETH_ALEN);
75 } else {
76 netdev_info(dev->net, "invalid hw address, using random\n");
77 eth_hw_addr_random(dev->net);
78 }
79}
80
81/* Get the PHY Identifier from the PHYSID1 & PHYSID2 MII registers */
82static u32 asix_get_phyid(struct usbnet *dev)
83{
84 int phy_reg;
85 u32 phy_id;
86 int i;
87
88 /* Poll for the rare case the FW or phy isn't ready yet. */
89 for (i = 0; i < 100; i++) {
90 phy_reg = asix_mdio_read(dev->net, dev->mii.phy_id, MII_PHYSID1);
91 if (phy_reg < 0)
92 return 0;
93 if (phy_reg != 0 && phy_reg != 0xFFFF)
94 break;
95 mdelay(1);
96 }
97
98 if (phy_reg <= 0 || phy_reg == 0xFFFF)
99 return 0;
100
101 phy_id = (phy_reg & 0xffff) << 16;
102
103 phy_reg = asix_mdio_read(dev->net, dev->mii.phy_id, MII_PHYSID2);
104 if (phy_reg < 0)
105 return 0;
106
107 phy_id |= (phy_reg & 0xffff);
108
109 return phy_id;
110}
111
112static u32 asix_get_link(struct net_device *net)
113{
114 struct usbnet *dev = netdev_priv(net);
115
116 return mii_link_ok(&dev->mii);
117}
118
119static int asix_ioctl (struct net_device *net, struct ifreq *rq, int cmd)
120{
121 struct usbnet *dev = netdev_priv(net);
122
123 return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
124}
125
126/* We need to override some ethtool_ops so we require our
127 own structure so we don't interfere with other usbnet
128 devices that may be connected at the same time. */
129static const struct ethtool_ops ax88172_ethtool_ops = {
130 .get_drvinfo = asix_get_drvinfo,
131 .get_link = asix_get_link,
132 .get_msglevel = usbnet_get_msglevel,
133 .set_msglevel = usbnet_set_msglevel,
134 .get_wol = asix_get_wol,
135 .set_wol = asix_set_wol,
136 .get_eeprom_len = asix_get_eeprom_len,
137 .get_eeprom = asix_get_eeprom,
138 .set_eeprom = asix_set_eeprom,
139 .nway_reset = usbnet_nway_reset,
140 .get_link_ksettings = usbnet_get_link_ksettings,
141 .set_link_ksettings = usbnet_set_link_ksettings,
142};
143
144static void ax88172_set_multicast(struct net_device *net)
145{
146 struct usbnet *dev = netdev_priv(net);
147 struct asix_data *data = (struct asix_data *)&dev->data;
148 u8 rx_ctl = 0x8c;
149
150 if (net->flags & IFF_PROMISC) {
151 rx_ctl |= 0x01;
152 } else if (net->flags & IFF_ALLMULTI ||
153 netdev_mc_count(net) > AX_MAX_MCAST) {
154 rx_ctl |= 0x02;
155 } else if (netdev_mc_empty(net)) {
156 /* just broadcast and directed */
157 } else {
158 /* We use the 20 byte dev->data
159 * for our 8 byte filter buffer
160 * to avoid allocating memory that
161 * is tricky to free later */
162 struct netdev_hw_addr *ha;
163 u32 crc_bits;
164
165 memset(data->multi_filter, 0, AX_MCAST_FILTER_SIZE);
166
167 /* Build the multicast hash filter. */
168 netdev_for_each_mc_addr(ha, net) {
169 crc_bits = ether_crc(ETH_ALEN, ha->addr) >> 26;
170 data->multi_filter[crc_bits >> 3] |=
171 1 << (crc_bits & 7);
172 }
173
174 asix_write_cmd_async(dev, AX_CMD_WRITE_MULTI_FILTER, 0, 0,
175 AX_MCAST_FILTER_SIZE, data->multi_filter);
176
177 rx_ctl |= 0x10;
178 }
179
180 asix_write_cmd_async(dev, AX_CMD_WRITE_RX_CTL, rx_ctl, 0, 0, NULL);
181}
182
183static int ax88172_link_reset(struct usbnet *dev)
184{
185 u8 mode;
186 struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET };
187
188 mii_check_media(&dev->mii, 1, 1);
189 mii_ethtool_gset(&dev->mii, &ecmd);
190 mode = AX88172_MEDIUM_DEFAULT;
191
192 if (ecmd.duplex != DUPLEX_FULL)
193 mode |= ~AX88172_MEDIUM_FD;
194
195 netdev_dbg(dev->net, "ax88172_link_reset() speed: %u duplex: %d setting mode to 0x%04x\n",
196 ethtool_cmd_speed(&ecmd), ecmd.duplex, mode);
197
198 asix_write_medium_mode(dev, mode, 0);
199
200 return 0;
201}
202
203static const struct net_device_ops ax88172_netdev_ops = {
204 .ndo_open = usbnet_open,
205 .ndo_stop = usbnet_stop,
206 .ndo_start_xmit = usbnet_start_xmit,
207 .ndo_tx_timeout = usbnet_tx_timeout,
208 .ndo_change_mtu = usbnet_change_mtu,
209 .ndo_get_stats64 = usbnet_get_stats64,
210 .ndo_set_mac_address = eth_mac_addr,
211 .ndo_validate_addr = eth_validate_addr,
212 .ndo_do_ioctl = asix_ioctl,
213 .ndo_set_rx_mode = ax88172_set_multicast,
214};
215
216static void asix_phy_reset(struct usbnet *dev, unsigned int reset_bits)
217{
218 unsigned int timeout = 5000;
219
220 asix_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, reset_bits);
221
222 /* give phy_id a chance to process reset */
223 udelay(500);
224
225 /* See IEEE 802.3 "22.2.4.1.1 Reset": 500ms max */
226 while (timeout--) {
227 if (asix_mdio_read(dev->net, dev->mii.phy_id, MII_BMCR)
228 & BMCR_RESET)
229 udelay(100);
230 else
231 return;
232 }
233
234 netdev_err(dev->net, "BMCR_RESET timeout on phy_id %d\n",
235 dev->mii.phy_id);
236}
237
238static int ax88172_bind(struct usbnet *dev, struct usb_interface *intf)
239{
240 int ret = 0;
241 u8 buf[ETH_ALEN];
242 int i;
243 unsigned long gpio_bits = dev->driver_info->data;
244
245 usbnet_get_endpoints(dev,intf);
246
247 /* Toggle the GPIOs in a manufacturer/model specific way */
248 for (i = 2; i >= 0; i--) {
249 ret = asix_write_cmd(dev, AX_CMD_WRITE_GPIOS,
250 (gpio_bits >> (i * 8)) & 0xff, 0, 0, NULL, 0);
251 if (ret < 0)
252 goto out;
253 msleep(5);
254 }
255
256 ret = asix_write_rx_ctl(dev, 0x80, 0);
257 if (ret < 0)
258 goto out;
259
260 /* Get the MAC address */
261 ret = asix_read_cmd(dev, AX88172_CMD_READ_NODE_ID,
262 0, 0, ETH_ALEN, buf, 0);
263 if (ret < 0) {
264 netdev_dbg(dev->net, "read AX_CMD_READ_NODE_ID failed: %d\n",
265 ret);
266 goto out;
267 }
268
269 asix_set_netdev_dev_addr(dev, buf);
270
271 /* Initialize MII structure */
272 dev->mii.dev = dev->net;
273 dev->mii.mdio_read = asix_mdio_read;
274 dev->mii.mdio_write = asix_mdio_write;
275 dev->mii.phy_id_mask = 0x3f;
276 dev->mii.reg_num_mask = 0x1f;
277 dev->mii.phy_id = asix_get_phy_addr(dev);
278
279 dev->net->netdev_ops = &ax88172_netdev_ops;
280 dev->net->ethtool_ops = &ax88172_ethtool_ops;
281 dev->net->needed_headroom = 4; /* cf asix_tx_fixup() */
282 dev->net->needed_tailroom = 4; /* cf asix_tx_fixup() */
283
284 asix_phy_reset(dev, BMCR_RESET);
285 asix_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
286 ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP);
287 mii_nway_restart(&dev->mii);
288
289 return 0;
290
291out:
292 return ret;
293}
294
295static const struct ethtool_ops ax88772_ethtool_ops = {
296 .get_drvinfo = asix_get_drvinfo,
297 .get_link = asix_get_link,
298 .get_msglevel = usbnet_get_msglevel,
299 .set_msglevel = usbnet_set_msglevel,
300 .get_wol = asix_get_wol,
301 .set_wol = asix_set_wol,
302 .get_eeprom_len = asix_get_eeprom_len,
303 .get_eeprom = asix_get_eeprom,
304 .set_eeprom = asix_set_eeprom,
305 .nway_reset = usbnet_nway_reset,
306 .get_link_ksettings = usbnet_get_link_ksettings,
307 .set_link_ksettings = usbnet_set_link_ksettings,
308};
309
310static int ax88772_link_reset(struct usbnet *dev)
311{
312 u16 mode;
313 struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET };
314
315 mii_check_media(&dev->mii, 1, 1);
316 mii_ethtool_gset(&dev->mii, &ecmd);
317 mode = AX88772_MEDIUM_DEFAULT;
318
319 if (ethtool_cmd_speed(&ecmd) != SPEED_100)
320 mode &= ~AX_MEDIUM_PS;
321
322 if (ecmd.duplex != DUPLEX_FULL)
323 mode &= ~AX_MEDIUM_FD;
324
325 netdev_dbg(dev->net, "ax88772_link_reset() speed: %u duplex: %d setting mode to 0x%04x\n",
326 ethtool_cmd_speed(&ecmd), ecmd.duplex, mode);
327
328 asix_write_medium_mode(dev, mode, 0);
329
330 return 0;
331}
332
333static int ax88772_reset(struct usbnet *dev)
334{
335 struct asix_data *data = (struct asix_data *)&dev->data;
336 int ret;
337
338 /* Rewrite MAC address */
339 ether_addr_copy(data->mac_addr, dev->net->dev_addr);
340 ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0,
341 ETH_ALEN, data->mac_addr, 0);
342 if (ret < 0)
343 goto out;
344
345 /* Set RX_CTL to default values with 2k buffer, and enable cactus */
346 ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL, 0);
347 if (ret < 0)
348 goto out;
349
350 ret = asix_write_medium_mode(dev, AX88772_MEDIUM_DEFAULT, 0);
351 if (ret < 0)
352 goto out;
353
354 return 0;
355
356out:
357 return ret;
358}
359
360static int ax88772_hw_reset(struct usbnet *dev, int in_pm)
361{
362 struct asix_data *data = (struct asix_data *)&dev->data;
363 int ret, embd_phy;
364 u16 rx_ctl;
365
366 ret = asix_write_gpio(dev, AX_GPIO_RSE | AX_GPIO_GPO_2 |
367 AX_GPIO_GPO2EN, 5, in_pm);
368 if (ret < 0)
369 goto out;
370
371 embd_phy = ((dev->mii.phy_id & 0x1f) == 0x10 ? 1 : 0);
372
373 ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, embd_phy,
374 0, 0, NULL, in_pm);
375 if (ret < 0) {
376 netdev_dbg(dev->net, "Select PHY #1 failed: %d\n", ret);
377 goto out;
378 }
379
380 if (embd_phy) {
381 ret = asix_sw_reset(dev, AX_SWRESET_IPPD, in_pm);
382 if (ret < 0)
383 goto out;
384
385 usleep_range(10000, 11000);
386
387 ret = asix_sw_reset(dev, AX_SWRESET_CLEAR, in_pm);
388 if (ret < 0)
389 goto out;
390
391 msleep(60);
392
393 ret = asix_sw_reset(dev, AX_SWRESET_IPRL | AX_SWRESET_PRL,
394 in_pm);
395 if (ret < 0)
396 goto out;
397 } else {
398 ret = asix_sw_reset(dev, AX_SWRESET_IPPD | AX_SWRESET_PRL,
399 in_pm);
400 if (ret < 0)
401 goto out;
402 }
403
404 msleep(150);
405
406 if (in_pm && (!asix_mdio_read_nopm(dev->net, dev->mii.phy_id,
407 MII_PHYSID1))){
408 ret = -EIO;
409 goto out;
410 }
411
412 ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL, in_pm);
413 if (ret < 0)
414 goto out;
415
416 ret = asix_write_medium_mode(dev, AX88772_MEDIUM_DEFAULT, in_pm);
417 if (ret < 0)
418 goto out;
419
420 ret = asix_write_cmd(dev, AX_CMD_WRITE_IPG0,
421 AX88772_IPG0_DEFAULT | AX88772_IPG1_DEFAULT,
422 AX88772_IPG2_DEFAULT, 0, NULL, in_pm);
423 if (ret < 0) {
424 netdev_dbg(dev->net, "Write IPG,IPG1,IPG2 failed: %d\n", ret);
425 goto out;
426 }
427
428 /* Rewrite MAC address */
429 ether_addr_copy(data->mac_addr, dev->net->dev_addr);
430 ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0,
431 ETH_ALEN, data->mac_addr, in_pm);
432 if (ret < 0)
433 goto out;
434
435 /* Set RX_CTL to default values with 2k buffer, and enable cactus */
436 ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL, in_pm);
437 if (ret < 0)
438 goto out;
439
440 rx_ctl = asix_read_rx_ctl(dev, in_pm);
441 netdev_dbg(dev->net, "RX_CTL is 0x%04x after all initializations\n",
442 rx_ctl);
443
444 rx_ctl = asix_read_medium_status(dev, in_pm);
445 netdev_dbg(dev->net,
446 "Medium Status is 0x%04x after all initializations\n",
447 rx_ctl);
448
449 return 0;
450
451out:
452 return ret;
453}
454
455static int ax88772a_hw_reset(struct usbnet *dev, int in_pm)
456{
457 struct asix_data *data = (struct asix_data *)&dev->data;
458 int ret, embd_phy;
459 u16 rx_ctl, phy14h, phy15h, phy16h;
460 u8 chipcode = 0;
461
462 ret = asix_write_gpio(dev, AX_GPIO_RSE, 5, in_pm);
463 if (ret < 0)
464 goto out;
465
466 embd_phy = ((dev->mii.phy_id & 0x1f) == 0x10 ? 1 : 0);
467
468 ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, embd_phy |
469 AX_PHYSEL_SSEN, 0, 0, NULL, in_pm);
470 if (ret < 0) {
471 netdev_dbg(dev->net, "Select PHY #1 failed: %d\n", ret);
472 goto out;
473 }
474 usleep_range(10000, 11000);
475
476 ret = asix_sw_reset(dev, AX_SWRESET_IPPD | AX_SWRESET_IPRL, in_pm);
477 if (ret < 0)
478 goto out;
479
480 usleep_range(10000, 11000);
481
482 ret = asix_sw_reset(dev, AX_SWRESET_IPRL, in_pm);
483 if (ret < 0)
484 goto out;
485
486 msleep(160);
487
488 ret = asix_sw_reset(dev, AX_SWRESET_CLEAR, in_pm);
489 if (ret < 0)
490 goto out;
491
492 ret = asix_sw_reset(dev, AX_SWRESET_IPRL, in_pm);
493 if (ret < 0)
494 goto out;
495
496 msleep(200);
497
498 if (in_pm && (!asix_mdio_read_nopm(dev->net, dev->mii.phy_id,
499 MII_PHYSID1))) {
500 ret = -1;
501 goto out;
502 }
503
504 ret = asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, 0,
505 0, 1, &chipcode, in_pm);
506 if (ret < 0)
507 goto out;
508
509 if ((chipcode & AX_CHIPCODE_MASK) == AX_AX88772B_CHIPCODE) {
510 ret = asix_write_cmd(dev, AX_QCTCTRL, 0x8000, 0x8001,
511 0, NULL, in_pm);
512 if (ret < 0) {
513 netdev_dbg(dev->net, "Write BQ setting failed: %d\n",
514 ret);
515 goto out;
516 }
517 } else if ((chipcode & AX_CHIPCODE_MASK) == AX_AX88772A_CHIPCODE) {
518 /* Check if the PHY registers have default settings */
519 phy14h = asix_mdio_read_nopm(dev->net, dev->mii.phy_id,
520 AX88772A_PHY14H);
521 phy15h = asix_mdio_read_nopm(dev->net, dev->mii.phy_id,
522 AX88772A_PHY15H);
523 phy16h = asix_mdio_read_nopm(dev->net, dev->mii.phy_id,
524 AX88772A_PHY16H);
525
526 netdev_dbg(dev->net,
527 "772a_hw_reset: MR20=0x%x MR21=0x%x MR22=0x%x\n",
528 phy14h, phy15h, phy16h);
529
530 /* Restore PHY registers default setting if not */
531 if (phy14h != AX88772A_PHY14H_DEFAULT)
532 asix_mdio_write_nopm(dev->net, dev->mii.phy_id,
533 AX88772A_PHY14H,
534 AX88772A_PHY14H_DEFAULT);
535 if (phy15h != AX88772A_PHY15H_DEFAULT)
536 asix_mdio_write_nopm(dev->net, dev->mii.phy_id,
537 AX88772A_PHY15H,
538 AX88772A_PHY15H_DEFAULT);
539 if (phy16h != AX88772A_PHY16H_DEFAULT)
540 asix_mdio_write_nopm(dev->net, dev->mii.phy_id,
541 AX88772A_PHY16H,
542 AX88772A_PHY16H_DEFAULT);
543 }
544
545 ret = asix_write_cmd(dev, AX_CMD_WRITE_IPG0,
546 AX88772_IPG0_DEFAULT | AX88772_IPG1_DEFAULT,
547 AX88772_IPG2_DEFAULT, 0, NULL, in_pm);
548 if (ret < 0) {
549 netdev_dbg(dev->net, "Write IPG,IPG1,IPG2 failed: %d\n", ret);
550 goto out;
551 }
552
553 /* Rewrite MAC address */
554 memcpy(data->mac_addr, dev->net->dev_addr, ETH_ALEN);
555 ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN,
556 data->mac_addr, in_pm);
557 if (ret < 0)
558 goto out;
559
560 /* Set RX_CTL to default values with 2k buffer, and enable cactus */
561 ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL, in_pm);
562 if (ret < 0)
563 goto out;
564
565 ret = asix_write_medium_mode(dev, AX88772_MEDIUM_DEFAULT, in_pm);
566 if (ret < 0)
567 return ret;
568
569 /* Set RX_CTL to default values with 2k buffer, and enable cactus */
570 ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL, in_pm);
571 if (ret < 0)
572 goto out;
573
574 rx_ctl = asix_read_rx_ctl(dev, in_pm);
575 netdev_dbg(dev->net, "RX_CTL is 0x%04x after all initializations\n",
576 rx_ctl);
577
578 rx_ctl = asix_read_medium_status(dev, in_pm);
579 netdev_dbg(dev->net,
580 "Medium Status is 0x%04x after all initializations\n",
581 rx_ctl);
582
583 return 0;
584
585out:
586 return ret;
587}
588
589static const struct net_device_ops ax88772_netdev_ops = {
590 .ndo_open = usbnet_open,
591 .ndo_stop = usbnet_stop,
592 .ndo_start_xmit = usbnet_start_xmit,
593 .ndo_tx_timeout = usbnet_tx_timeout,
594 .ndo_change_mtu = usbnet_change_mtu,
595 .ndo_get_stats64 = usbnet_get_stats64,
596 .ndo_set_mac_address = asix_set_mac_address,
597 .ndo_validate_addr = eth_validate_addr,
598 .ndo_do_ioctl = asix_ioctl,
599 .ndo_set_rx_mode = asix_set_multicast,
600};
601
602static void ax88772_suspend(struct usbnet *dev)
603{
604 struct asix_common_private *priv = dev->driver_priv;
605 u16 medium;
606
607 /* Stop MAC operation */
608 medium = asix_read_medium_status(dev, 1);
609 medium &= ~AX_MEDIUM_RE;
610 asix_write_medium_mode(dev, medium, 1);
611
612 netdev_dbg(dev->net, "ax88772_suspend: medium=0x%04x\n",
613 asix_read_medium_status(dev, 1));
614
615 /* Preserve BMCR for restoring */
616 priv->presvd_phy_bmcr =
617 asix_mdio_read_nopm(dev->net, dev->mii.phy_id, MII_BMCR);
618
619 /* Preserve ANAR for restoring */
620 priv->presvd_phy_advertise =
621 asix_mdio_read_nopm(dev->net, dev->mii.phy_id, MII_ADVERTISE);
622}
623
624static int asix_suspend(struct usb_interface *intf, pm_message_t message)
625{
626 struct usbnet *dev = usb_get_intfdata(intf);
627 struct asix_common_private *priv = dev->driver_priv;
628
629 if (priv && priv->suspend)
630 priv->suspend(dev);
631
632 return usbnet_suspend(intf, message);
633}
634
635static void ax88772_restore_phy(struct usbnet *dev)
636{
637 struct asix_common_private *priv = dev->driver_priv;
638
639 if (priv->presvd_phy_advertise) {
640 /* Restore Advertisement control reg */
641 asix_mdio_write_nopm(dev->net, dev->mii.phy_id, MII_ADVERTISE,
642 priv->presvd_phy_advertise);
643
644 /* Restore BMCR */
645 asix_mdio_write_nopm(dev->net, dev->mii.phy_id, MII_BMCR,
646 priv->presvd_phy_bmcr);
647
648 mii_nway_restart(&dev->mii);
649 priv->presvd_phy_advertise = 0;
650 priv->presvd_phy_bmcr = 0;
651 }
652}
653
654static void ax88772_resume(struct usbnet *dev)
655{
656 int i;
657
658 for (i = 0; i < 3; i++)
659 if (!ax88772_hw_reset(dev, 1))
660 break;
661 ax88772_restore_phy(dev);
662}
663
664static void ax88772a_resume(struct usbnet *dev)
665{
666 int i;
667
668 for (i = 0; i < 3; i++) {
669 if (!ax88772a_hw_reset(dev, 1))
670 break;
671 }
672
673 ax88772_restore_phy(dev);
674}
675
676static int asix_resume(struct usb_interface *intf)
677{
678 struct usbnet *dev = usb_get_intfdata(intf);
679 struct asix_common_private *priv = dev->driver_priv;
680
681 if (priv && priv->resume)
682 priv->resume(dev);
683
684 return usbnet_resume(intf);
685}
686
687static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
688{
689 int ret, i;
690 u8 buf[ETH_ALEN], chipcode = 0;
691 u32 phyid;
692 struct asix_common_private *priv;
693
694 usbnet_get_endpoints(dev,intf);
695
696 /* Get the MAC address */
697 if (dev->driver_info->data & FLAG_EEPROM_MAC) {
698 for (i = 0; i < (ETH_ALEN >> 1); i++) {
699 ret = asix_read_cmd(dev, AX_CMD_READ_EEPROM, 0x04 + i,
700 0, 2, buf + i * 2, 0);
701 if (ret < 0)
702 break;
703 }
704 } else {
705 ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID,
706 0, 0, ETH_ALEN, buf, 0);
707 }
708
709 if (ret < 0) {
710 netdev_dbg(dev->net, "Failed to read MAC address: %d\n", ret);
711 return ret;
712 }
713
714 asix_set_netdev_dev_addr(dev, buf);
715
716 /* Initialize MII structure */
717 dev->mii.dev = dev->net;
718 dev->mii.mdio_read = asix_mdio_read;
719 dev->mii.mdio_write = asix_mdio_write;
720 dev->mii.phy_id_mask = 0x1f;
721 dev->mii.reg_num_mask = 0x1f;
722 dev->mii.phy_id = asix_get_phy_addr(dev);
723
724 dev->net->netdev_ops = &ax88772_netdev_ops;
725 dev->net->ethtool_ops = &ax88772_ethtool_ops;
726 dev->net->needed_headroom = 4; /* cf asix_tx_fixup() */
727 dev->net->needed_tailroom = 4; /* cf asix_tx_fixup() */
728
729 asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, 0, 0, 1, &chipcode, 0);
730 chipcode &= AX_CHIPCODE_MASK;
731
732 (chipcode == AX_AX88772_CHIPCODE) ? ax88772_hw_reset(dev, 0) :
733 ax88772a_hw_reset(dev, 0);
734
735 /* Read PHYID register *AFTER* the PHY was reset properly */
736 phyid = asix_get_phyid(dev);
737 netdev_dbg(dev->net, "PHYID=0x%08x\n", phyid);
738
739 /* Asix framing packs multiple eth frames into a 2K usb bulk transfer */
740 if (dev->driver_info->flags & FLAG_FRAMING_AX) {
741 /* hard_mtu is still the default - the device does not support
742 jumbo eth frames */
743 dev->rx_urb_size = 2048;
744 }
745
746 dev->driver_priv = kzalloc(sizeof(struct asix_common_private), GFP_KERNEL);
747 if (!dev->driver_priv)
748 return -ENOMEM;
749
750 priv = dev->driver_priv;
751
752 priv->presvd_phy_bmcr = 0;
753 priv->presvd_phy_advertise = 0;
754 if (chipcode == AX_AX88772_CHIPCODE) {
755 priv->resume = ax88772_resume;
756 priv->suspend = ax88772_suspend;
757 } else {
758 priv->resume = ax88772a_resume;
759 priv->suspend = ax88772_suspend;
760 }
761
762 return 0;
763}
764
765static void ax88772_unbind(struct usbnet *dev, struct usb_interface *intf)
766{
767 asix_rx_fixup_common_free(dev->driver_priv);
768 kfree(dev->driver_priv);
769}
770
771static const struct ethtool_ops ax88178_ethtool_ops = {
772 .get_drvinfo = asix_get_drvinfo,
773 .get_link = asix_get_link,
774 .get_msglevel = usbnet_get_msglevel,
775 .set_msglevel = usbnet_set_msglevel,
776 .get_wol = asix_get_wol,
777 .set_wol = asix_set_wol,
778 .get_eeprom_len = asix_get_eeprom_len,
779 .get_eeprom = asix_get_eeprom,
780 .set_eeprom = asix_set_eeprom,
781 .nway_reset = usbnet_nway_reset,
782 .get_link_ksettings = usbnet_get_link_ksettings,
783 .set_link_ksettings = usbnet_set_link_ksettings,
784};
785
786static int marvell_phy_init(struct usbnet *dev)
787{
788 struct asix_data *data = (struct asix_data *)&dev->data;
789 u16 reg;
790
791 netdev_dbg(dev->net, "marvell_phy_init()\n");
792
793 reg = asix_mdio_read(dev->net, dev->mii.phy_id, MII_MARVELL_STATUS);
794 netdev_dbg(dev->net, "MII_MARVELL_STATUS = 0x%04x\n", reg);
795
796 asix_mdio_write(dev->net, dev->mii.phy_id, MII_MARVELL_CTRL,
797 MARVELL_CTRL_RXDELAY | MARVELL_CTRL_TXDELAY);
798
799 if (data->ledmode) {
800 reg = asix_mdio_read(dev->net, dev->mii.phy_id,
801 MII_MARVELL_LED_CTRL);
802 netdev_dbg(dev->net, "MII_MARVELL_LED_CTRL (1) = 0x%04x\n", reg);
803
804 reg &= 0xf8ff;
805 reg |= (1 + 0x0100);
806 asix_mdio_write(dev->net, dev->mii.phy_id,
807 MII_MARVELL_LED_CTRL, reg);
808
809 reg = asix_mdio_read(dev->net, dev->mii.phy_id,
810 MII_MARVELL_LED_CTRL);
811 netdev_dbg(dev->net, "MII_MARVELL_LED_CTRL (2) = 0x%04x\n", reg);
812 reg &= 0xfc0f;
813 }
814
815 return 0;
816}
817
818static int rtl8211cl_phy_init(struct usbnet *dev)
819{
820 struct asix_data *data = (struct asix_data *)&dev->data;
821
822 netdev_dbg(dev->net, "rtl8211cl_phy_init()\n");
823
824 asix_mdio_write (dev->net, dev->mii.phy_id, 0x1f, 0x0005);
825 asix_mdio_write (dev->net, dev->mii.phy_id, 0x0c, 0);
826 asix_mdio_write (dev->net, dev->mii.phy_id, 0x01,
827 asix_mdio_read (dev->net, dev->mii.phy_id, 0x01) | 0x0080);
828 asix_mdio_write (dev->net, dev->mii.phy_id, 0x1f, 0);
829
830 if (data->ledmode == 12) {
831 asix_mdio_write (dev->net, dev->mii.phy_id, 0x1f, 0x0002);
832 asix_mdio_write (dev->net, dev->mii.phy_id, 0x1a, 0x00cb);
833 asix_mdio_write (dev->net, dev->mii.phy_id, 0x1f, 0);
834 }
835
836 return 0;
837}
838
839static int marvell_led_status(struct usbnet *dev, u16 speed)
840{
841 u16 reg = asix_mdio_read(dev->net, dev->mii.phy_id, MARVELL_LED_MANUAL);
842
843 netdev_dbg(dev->net, "marvell_led_status() read 0x%04x\n", reg);
844
845 /* Clear out the center LED bits - 0x03F0 */
846 reg &= 0xfc0f;
847
848 switch (speed) {
849 case SPEED_1000:
850 reg |= 0x03e0;
851 break;
852 case SPEED_100:
853 reg |= 0x03b0;
854 break;
855 default:
856 reg |= 0x02f0;
857 }
858
859 netdev_dbg(dev->net, "marvell_led_status() writing 0x%04x\n", reg);
860 asix_mdio_write(dev->net, dev->mii.phy_id, MARVELL_LED_MANUAL, reg);
861
862 return 0;
863}
864
865static int ax88178_reset(struct usbnet *dev)
866{
867 struct asix_data *data = (struct asix_data *)&dev->data;
868 int ret;
869 __le16 eeprom;
870 u8 status;
871 int gpio0 = 0;
872 u32 phyid;
873
874 asix_read_cmd(dev, AX_CMD_READ_GPIOS, 0, 0, 1, &status, 0);
875 netdev_dbg(dev->net, "GPIO Status: 0x%04x\n", status);
876
877 asix_write_cmd(dev, AX_CMD_WRITE_ENABLE, 0, 0, 0, NULL, 0);
878 asix_read_cmd(dev, AX_CMD_READ_EEPROM, 0x0017, 0, 2, &eeprom, 0);
879 asix_write_cmd(dev, AX_CMD_WRITE_DISABLE, 0, 0, 0, NULL, 0);
880
881 netdev_dbg(dev->net, "EEPROM index 0x17 is 0x%04x\n", eeprom);
882
883 if (eeprom == cpu_to_le16(0xffff)) {
884 data->phymode = PHY_MODE_MARVELL;
885 data->ledmode = 0;
886 gpio0 = 1;
887 } else {
888 data->phymode = le16_to_cpu(eeprom) & 0x7F;
889 data->ledmode = le16_to_cpu(eeprom) >> 8;
890 gpio0 = (le16_to_cpu(eeprom) & 0x80) ? 0 : 1;
891 }
892 netdev_dbg(dev->net, "GPIO0: %d, PhyMode: %d\n", gpio0, data->phymode);
893
894 /* Power up external GigaPHY through AX88178 GPIO pin */
895 asix_write_gpio(dev, AX_GPIO_RSE | AX_GPIO_GPO_1 |
896 AX_GPIO_GPO1EN, 40, 0);
897 if ((le16_to_cpu(eeprom) >> 8) != 1) {
898 asix_write_gpio(dev, 0x003c, 30, 0);
899 asix_write_gpio(dev, 0x001c, 300, 0);
900 asix_write_gpio(dev, 0x003c, 30, 0);
901 } else {
902 netdev_dbg(dev->net, "gpio phymode == 1 path\n");
903 asix_write_gpio(dev, AX_GPIO_GPO1EN, 30, 0);
904 asix_write_gpio(dev, AX_GPIO_GPO1EN | AX_GPIO_GPO_1, 30, 0);
905 }
906
907 /* Read PHYID register *AFTER* powering up PHY */
908 phyid = asix_get_phyid(dev);
909 netdev_dbg(dev->net, "PHYID=0x%08x\n", phyid);
910
911 /* Set AX88178 to enable MII/GMII/RGMII interface for external PHY */
912 asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, 0, 0, 0, NULL, 0);
913
914 asix_sw_reset(dev, 0, 0);
915 msleep(150);
916
917 asix_sw_reset(dev, AX_SWRESET_PRL | AX_SWRESET_IPPD, 0);
918 msleep(150);
919
920 asix_write_rx_ctl(dev, 0, 0);
921
922 if (data->phymode == PHY_MODE_MARVELL) {
923 marvell_phy_init(dev);
924 msleep(60);
925 } else if (data->phymode == PHY_MODE_RTL8211CL)
926 rtl8211cl_phy_init(dev);
927
928 asix_phy_reset(dev, BMCR_RESET | BMCR_ANENABLE);
929 asix_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
930 ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP);
931 asix_mdio_write(dev->net, dev->mii.phy_id, MII_CTRL1000,
932 ADVERTISE_1000FULL);
933
934 asix_write_medium_mode(dev, AX88178_MEDIUM_DEFAULT, 0);
935 mii_nway_restart(&dev->mii);
936
937 /* Rewrite MAC address */
938 memcpy(data->mac_addr, dev->net->dev_addr, ETH_ALEN);
939 ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN,
940 data->mac_addr, 0);
941 if (ret < 0)
942 return ret;
943
944 ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL, 0);
945 if (ret < 0)
946 return ret;
947
948 return 0;
949}
950
951static int ax88178_link_reset(struct usbnet *dev)
952{
953 u16 mode;
954 struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET };
955 struct asix_data *data = (struct asix_data *)&dev->data;
956 u32 speed;
957
958 netdev_dbg(dev->net, "ax88178_link_reset()\n");
959
960 mii_check_media(&dev->mii, 1, 1);
961 mii_ethtool_gset(&dev->mii, &ecmd);
962 mode = AX88178_MEDIUM_DEFAULT;
963 speed = ethtool_cmd_speed(&ecmd);
964
965 if (speed == SPEED_1000)
966 mode |= AX_MEDIUM_GM;
967 else if (speed == SPEED_100)
968 mode |= AX_MEDIUM_PS;
969 else
970 mode &= ~(AX_MEDIUM_PS | AX_MEDIUM_GM);
971
972 mode |= AX_MEDIUM_ENCK;
973
974 if (ecmd.duplex == DUPLEX_FULL)
975 mode |= AX_MEDIUM_FD;
976 else
977 mode &= ~AX_MEDIUM_FD;
978
979 netdev_dbg(dev->net, "ax88178_link_reset() speed: %u duplex: %d setting mode to 0x%04x\n",
980 speed, ecmd.duplex, mode);
981
982 asix_write_medium_mode(dev, mode, 0);
983
984 if (data->phymode == PHY_MODE_MARVELL && data->ledmode)
985 marvell_led_status(dev, speed);
986
987 return 0;
988}
989
990static void ax88178_set_mfb(struct usbnet *dev)
991{
992 u16 mfb = AX_RX_CTL_MFB_16384;
993 u16 rxctl;
994 u16 medium;
995 int old_rx_urb_size = dev->rx_urb_size;
996
997 if (dev->hard_mtu < 2048) {
998 dev->rx_urb_size = 2048;
999 mfb = AX_RX_CTL_MFB_2048;
1000 } else if (dev->hard_mtu < 4096) {
1001 dev->rx_urb_size = 4096;
1002 mfb = AX_RX_CTL_MFB_4096;
1003 } else if (dev->hard_mtu < 8192) {
1004 dev->rx_urb_size = 8192;
1005 mfb = AX_RX_CTL_MFB_8192;
1006 } else if (dev->hard_mtu < 16384) {
1007 dev->rx_urb_size = 16384;
1008 mfb = AX_RX_CTL_MFB_16384;
1009 }
1010
1011 rxctl = asix_read_rx_ctl(dev, 0);
1012 asix_write_rx_ctl(dev, (rxctl & ~AX_RX_CTL_MFB_16384) | mfb, 0);
1013
1014 medium = asix_read_medium_status(dev, 0);
1015 if (dev->net->mtu > 1500)
1016 medium |= AX_MEDIUM_JFE;
1017 else
1018 medium &= ~AX_MEDIUM_JFE;
1019 asix_write_medium_mode(dev, medium, 0);
1020
1021 if (dev->rx_urb_size > old_rx_urb_size)
1022 usbnet_unlink_rx_urbs(dev);
1023}
1024
1025static int ax88178_change_mtu(struct net_device *net, int new_mtu)
1026{
1027 struct usbnet *dev = netdev_priv(net);
1028 int ll_mtu = new_mtu + net->hard_header_len + 4;
1029
1030 netdev_dbg(dev->net, "ax88178_change_mtu() new_mtu=%d\n", new_mtu);
1031
1032 if ((ll_mtu % dev->maxpacket) == 0)
1033 return -EDOM;
1034
1035 net->mtu = new_mtu;
1036 dev->hard_mtu = net->mtu + net->hard_header_len;
1037 ax88178_set_mfb(dev);
1038
1039 /* max qlen depend on hard_mtu and rx_urb_size */
1040 usbnet_update_max_qlen(dev);
1041
1042 return 0;
1043}
1044
1045static const struct net_device_ops ax88178_netdev_ops = {
1046 .ndo_open = usbnet_open,
1047 .ndo_stop = usbnet_stop,
1048 .ndo_start_xmit = usbnet_start_xmit,
1049 .ndo_tx_timeout = usbnet_tx_timeout,
1050 .ndo_get_stats64 = usbnet_get_stats64,
1051 .ndo_set_mac_address = asix_set_mac_address,
1052 .ndo_validate_addr = eth_validate_addr,
1053 .ndo_set_rx_mode = asix_set_multicast,
1054 .ndo_do_ioctl = asix_ioctl,
1055 .ndo_change_mtu = ax88178_change_mtu,
1056};
1057
1058static int ax88178_bind(struct usbnet *dev, struct usb_interface *intf)
1059{
1060 int ret;
1061 u8 buf[ETH_ALEN];
1062
1063 usbnet_get_endpoints(dev,intf);
1064
1065 /* Get the MAC address */
1066 ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf, 0);
1067 if (ret < 0) {
1068 netdev_dbg(dev->net, "Failed to read MAC address: %d\n", ret);
1069 return ret;
1070 }
1071
1072 asix_set_netdev_dev_addr(dev, buf);
1073
1074 /* Initialize MII structure */
1075 dev->mii.dev = dev->net;
1076 dev->mii.mdio_read = asix_mdio_read;
1077 dev->mii.mdio_write = asix_mdio_write;
1078 dev->mii.phy_id_mask = 0x1f;
1079 dev->mii.reg_num_mask = 0xff;
1080 dev->mii.supports_gmii = 1;
1081 dev->mii.phy_id = asix_get_phy_addr(dev);
1082
1083 dev->net->netdev_ops = &ax88178_netdev_ops;
1084 dev->net->ethtool_ops = &ax88178_ethtool_ops;
1085 dev->net->max_mtu = 16384 - (dev->net->hard_header_len + 4);
1086
1087 /* Blink LEDS so users know driver saw dongle */
1088 asix_sw_reset(dev, 0, 0);
1089 msleep(150);
1090
1091 asix_sw_reset(dev, AX_SWRESET_PRL | AX_SWRESET_IPPD, 0);
1092 msleep(150);
1093
1094 /* Asix framing packs multiple eth frames into a 2K usb bulk transfer */
1095 if (dev->driver_info->flags & FLAG_FRAMING_AX) {
1096 /* hard_mtu is still the default - the device does not support
1097 jumbo eth frames */
1098 dev->rx_urb_size = 2048;
1099 }
1100
1101 dev->driver_priv = kzalloc(sizeof(struct asix_common_private), GFP_KERNEL);
1102 if (!dev->driver_priv)
1103 return -ENOMEM;
1104
1105 return 0;
1106}
1107
1108static const struct driver_info ax8817x_info = {
1109 .description = "ASIX AX8817x USB 2.0 Ethernet",
1110 .bind = ax88172_bind,
1111 .status = asix_status,
1112 .link_reset = ax88172_link_reset,
1113 .reset = ax88172_link_reset,
1114 .flags = FLAG_ETHER | FLAG_LINK_INTR,
1115 .data = 0x00130103,
1116};
1117
1118static const struct driver_info dlink_dub_e100_info = {
1119 .description = "DLink DUB-E100 USB Ethernet",
1120 .bind = ax88172_bind,
1121 .status = asix_status,
1122 .link_reset = ax88172_link_reset,
1123 .reset = ax88172_link_reset,
1124 .flags = FLAG_ETHER | FLAG_LINK_INTR,
1125 .data = 0x009f9d9f,
1126};
1127
1128static const struct driver_info netgear_fa120_info = {
1129 .description = "Netgear FA-120 USB Ethernet",
1130 .bind = ax88172_bind,
1131 .status = asix_status,
1132 .link_reset = ax88172_link_reset,
1133 .reset = ax88172_link_reset,
1134 .flags = FLAG_ETHER | FLAG_LINK_INTR,
1135 .data = 0x00130103,
1136};
1137
1138static const struct driver_info hawking_uf200_info = {
1139 .description = "Hawking UF200 USB Ethernet",
1140 .bind = ax88172_bind,
1141 .status = asix_status,
1142 .link_reset = ax88172_link_reset,
1143 .reset = ax88172_link_reset,
1144 .flags = FLAG_ETHER | FLAG_LINK_INTR,
1145 .data = 0x001f1d1f,
1146};
1147
1148static const struct driver_info ax88772_info = {
1149 .description = "ASIX AX88772 USB 2.0 Ethernet",
1150 .bind = ax88772_bind,
1151 .unbind = ax88772_unbind,
1152 .status = asix_status,
1153 .link_reset = ax88772_link_reset,
1154 .reset = ax88772_reset,
1155 .flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR | FLAG_MULTI_PACKET,
1156 .rx_fixup = asix_rx_fixup_common,
1157 .tx_fixup = asix_tx_fixup,
1158};
1159
1160static const struct driver_info ax88772b_info = {
1161 .description = "ASIX AX88772B USB 2.0 Ethernet",
1162 .bind = ax88772_bind,
1163 .unbind = ax88772_unbind,
1164 .status = asix_status,
1165 .link_reset = ax88772_link_reset,
1166 .reset = ax88772_reset,
1167 .flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR |
1168 FLAG_MULTI_PACKET,
1169 .rx_fixup = asix_rx_fixup_common,
1170 .tx_fixup = asix_tx_fixup,
1171 .data = FLAG_EEPROM_MAC,
1172};
1173
1174static const struct driver_info ax88178_info = {
1175 .description = "ASIX AX88178 USB 2.0 Ethernet",
1176 .bind = ax88178_bind,
1177 .unbind = ax88772_unbind,
1178 .status = asix_status,
1179 .link_reset = ax88178_link_reset,
1180 .reset = ax88178_reset,
1181 .flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR |
1182 FLAG_MULTI_PACKET,
1183 .rx_fixup = asix_rx_fixup_common,
1184 .tx_fixup = asix_tx_fixup,
1185};
1186
1187/*
1188 * USBLINK 20F9 "USB 2.0 LAN" USB ethernet adapter, typically found in
1189 * no-name packaging.
1190 * USB device strings are:
1191 * 1: Manufacturer: USBLINK
1192 * 2: Product: HG20F9 USB2.0
1193 * 3: Serial: 000003
1194 * Appears to be compatible with Asix 88772B.
1195 */
1196static const struct driver_info hg20f9_info = {
1197 .description = "HG20F9 USB 2.0 Ethernet",
1198 .bind = ax88772_bind,
1199 .unbind = ax88772_unbind,
1200 .status = asix_status,
1201 .link_reset = ax88772_link_reset,
1202 .reset = ax88772_reset,
1203 .flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR |
1204 FLAG_MULTI_PACKET,
1205 .rx_fixup = asix_rx_fixup_common,
1206 .tx_fixup = asix_tx_fixup,
1207 .data = FLAG_EEPROM_MAC,
1208};
1209
1210static const struct usb_device_id products [] = {
1211{
1212 // Linksys USB200M
1213 USB_DEVICE (0x077b, 0x2226),
1214 .driver_info = (unsigned long) &ax8817x_info,
1215}, {
1216 // Netgear FA120
1217 USB_DEVICE (0x0846, 0x1040),
1218 .driver_info = (unsigned long) &netgear_fa120_info,
1219}, {
1220 // DLink DUB-E100
1221 USB_DEVICE (0x2001, 0x1a00),
1222 .driver_info = (unsigned long) &dlink_dub_e100_info,
1223}, {
1224 // Intellinet, ST Lab USB Ethernet
1225 USB_DEVICE (0x0b95, 0x1720),
1226 .driver_info = (unsigned long) &ax8817x_info,
1227}, {
1228 // Hawking UF200, TrendNet TU2-ET100
1229 USB_DEVICE (0x07b8, 0x420a),
1230 .driver_info = (unsigned long) &hawking_uf200_info,
1231}, {
1232 // Billionton Systems, USB2AR
1233 USB_DEVICE (0x08dd, 0x90ff),
1234 .driver_info = (unsigned long) &ax8817x_info,
1235}, {
1236 // Billionton Systems, GUSB2AM-1G-B
1237 USB_DEVICE(0x08dd, 0x0114),
1238 .driver_info = (unsigned long) &ax88178_info,
1239}, {
1240 // ATEN UC210T
1241 USB_DEVICE (0x0557, 0x2009),
1242 .driver_info = (unsigned long) &ax8817x_info,
1243}, {
1244 // Buffalo LUA-U2-KTX
1245 USB_DEVICE (0x0411, 0x003d),
1246 .driver_info = (unsigned long) &ax8817x_info,
1247}, {
1248 // Buffalo LUA-U2-GT 10/100/1000
1249 USB_DEVICE (0x0411, 0x006e),
1250 .driver_info = (unsigned long) &ax88178_info,
1251}, {
1252 // Sitecom LN-029 "USB 2.0 10/100 Ethernet adapter"
1253 USB_DEVICE (0x6189, 0x182d),
1254 .driver_info = (unsigned long) &ax8817x_info,
1255}, {
1256 // Sitecom LN-031 "USB 2.0 10/100/1000 Ethernet adapter"
1257 USB_DEVICE (0x0df6, 0x0056),
1258 .driver_info = (unsigned long) &ax88178_info,
1259}, {
1260 // Sitecom LN-028 "USB 2.0 10/100/1000 Ethernet adapter"
1261 USB_DEVICE (0x0df6, 0x061c),
1262 .driver_info = (unsigned long) &ax88178_info,
1263}, {
1264 // corega FEther USB2-TX
1265 USB_DEVICE (0x07aa, 0x0017),
1266 .driver_info = (unsigned long) &ax8817x_info,
1267}, {
1268 // Surecom EP-1427X-2
1269 USB_DEVICE (0x1189, 0x0893),
1270 .driver_info = (unsigned long) &ax8817x_info,
1271}, {
1272 // goodway corp usb gwusb2e
1273 USB_DEVICE (0x1631, 0x6200),
1274 .driver_info = (unsigned long) &ax8817x_info,
1275}, {
1276 // JVC MP-PRX1 Port Replicator
1277 USB_DEVICE (0x04f1, 0x3008),
1278 .driver_info = (unsigned long) &ax8817x_info,
1279}, {
1280 // Lenovo U2L100P 10/100
1281 USB_DEVICE (0x17ef, 0x7203),
1282 .driver_info = (unsigned long)&ax88772b_info,
1283}, {
1284 // ASIX AX88772B 10/100
1285 USB_DEVICE (0x0b95, 0x772b),
1286 .driver_info = (unsigned long) &ax88772b_info,
1287}, {
1288 // ASIX AX88772 10/100
1289 USB_DEVICE (0x0b95, 0x7720),
1290 .driver_info = (unsigned long) &ax88772_info,
1291}, {
1292 // ASIX AX88178 10/100/1000
1293 USB_DEVICE (0x0b95, 0x1780),
1294 .driver_info = (unsigned long) &ax88178_info,
1295}, {
1296 // Logitec LAN-GTJ/U2A
1297 USB_DEVICE (0x0789, 0x0160),
1298 .driver_info = (unsigned long) &ax88178_info,
1299}, {
1300 // Linksys USB200M Rev 2
1301 USB_DEVICE (0x13b1, 0x0018),
1302 .driver_info = (unsigned long) &ax88772_info,
1303}, {
1304 // 0Q0 cable ethernet
1305 USB_DEVICE (0x1557, 0x7720),
1306 .driver_info = (unsigned long) &ax88772_info,
1307}, {
1308 // DLink DUB-E100 H/W Ver B1
1309 USB_DEVICE (0x07d1, 0x3c05),
1310 .driver_info = (unsigned long) &ax88772_info,
1311}, {
1312 // DLink DUB-E100 H/W Ver B1 Alternate
1313 USB_DEVICE (0x2001, 0x3c05),
1314 .driver_info = (unsigned long) &ax88772_info,
1315}, {
1316 // DLink DUB-E100 H/W Ver C1
1317 USB_DEVICE (0x2001, 0x1a02),
1318 .driver_info = (unsigned long) &ax88772_info,
1319}, {
1320 // Linksys USB1000
1321 USB_DEVICE (0x1737, 0x0039),
1322 .driver_info = (unsigned long) &ax88178_info,
1323}, {
1324 // IO-DATA ETG-US2
1325 USB_DEVICE (0x04bb, 0x0930),
1326 .driver_info = (unsigned long) &ax88178_info,
1327}, {
1328 // Belkin F5D5055
1329 USB_DEVICE(0x050d, 0x5055),
1330 .driver_info = (unsigned long) &ax88178_info,
1331}, {
1332 // Apple USB Ethernet Adapter
1333 USB_DEVICE(0x05ac, 0x1402),
1334 .driver_info = (unsigned long) &ax88772_info,
1335}, {
1336 // Cables-to-Go USB Ethernet Adapter
1337 USB_DEVICE(0x0b95, 0x772a),
1338 .driver_info = (unsigned long) &ax88772_info,
1339}, {
1340 // ABOCOM for pci
1341 USB_DEVICE(0x14ea, 0xab11),
1342 .driver_info = (unsigned long) &ax88178_info,
1343}, {
1344 // ASIX 88772a
1345 USB_DEVICE(0x0db0, 0xa877),
1346 .driver_info = (unsigned long) &ax88772_info,
1347}, {
1348 // Asus USB Ethernet Adapter
1349 USB_DEVICE (0x0b95, 0x7e2b),
1350 .driver_info = (unsigned long)&ax88772b_info,
1351}, {
1352 /* ASIX 88172a demo board */
1353 USB_DEVICE(0x0b95, 0x172a),
1354 .driver_info = (unsigned long) &ax88172a_info,
1355}, {
1356 /*
1357 * USBLINK HG20F9 "USB 2.0 LAN"
1358 * Appears to have gazumped Linksys's manufacturer ID but
1359 * doesn't (yet) conflict with any known Linksys product.
1360 */
1361 USB_DEVICE(0x066b, 0x20f9),
1362 .driver_info = (unsigned long) &hg20f9_info,
1363},
1364 { }, // END
1365};
1366MODULE_DEVICE_TABLE(usb, products);
1367
1368static struct usb_driver asix_driver = {
1369 .name = DRIVER_NAME,
1370 .id_table = products,
1371 .probe = usbnet_probe,
1372 .suspend = asix_suspend,
1373 .resume = asix_resume,
1374 .reset_resume = asix_resume,
1375 .disconnect = usbnet_disconnect,
1376 .supports_autosuspend = 1,
1377 .disable_hub_initiated_lpm = 1,
1378};
1379
1380module_usb_driver(asix_driver);
1381
1382MODULE_AUTHOR("David Hollis");
1383MODULE_VERSION(DRIVER_VERSION);
1384MODULE_DESCRIPTION("ASIX AX8817X based USB 2.0 Ethernet Devices");
1385MODULE_LICENSE("GPL");
1386