Loading...
1/*
2
3 mii.c: MII interface library
4
5 Maintained by Jeff Garzik <jgarzik@pobox.com>
6 Copyright 2001,2002 Jeff Garzik
7
8 Various code came from myson803.c and other files by
9 Donald Becker. Copyright:
10
11 Written 1998-2002 by Donald Becker.
12
13 This software may be used and distributed according
14 to the terms of the GNU General Public License (GPL),
15 incorporated herein by reference. Drivers based on
16 or derived from this code fall under the GPL and must
17 retain the authorship, copyright and license notice.
18 This file is not a complete program and may only be
19 used when the entire operating system is licensed
20 under the GPL.
21
22 The author may be reached as becker@scyld.com, or C/O
23 Scyld Computing Corporation
24 410 Severn Ave., Suite 210
25 Annapolis MD 21403
26
27
28 */
29
30#include <linux/kernel.h>
31#include <linux/module.h>
32#include <linux/netdevice.h>
33#include <linux/ethtool.h>
34#include <linux/mii.h>
35
36static u32 mii_get_an(struct mii_if_info *mii, u16 addr)
37{
38 int advert;
39
40 advert = mii->mdio_read(mii->dev, mii->phy_id, addr);
41
42 return mii_lpa_to_ethtool_lpa_t(advert);
43}
44
45/**
46 * mii_ethtool_gset - get settings that are specified in @ecmd
47 * @mii: MII interface
48 * @ecmd: requested ethtool_cmd
49 *
50 * The @ecmd parameter is expected to have been cleared before calling
51 * mii_ethtool_gset().
52 */
53void mii_ethtool_gset(struct mii_if_info *mii, struct ethtool_cmd *ecmd)
54{
55 struct net_device *dev = mii->dev;
56 u16 bmcr, bmsr, ctrl1000 = 0, stat1000 = 0;
57 u32 nego;
58
59 ecmd->supported =
60 (SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full |
61 SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full |
62 SUPPORTED_Autoneg | SUPPORTED_TP | SUPPORTED_MII);
63 if (mii->supports_gmii)
64 ecmd->supported |= SUPPORTED_1000baseT_Half |
65 SUPPORTED_1000baseT_Full;
66
67 /* only supports twisted-pair */
68 ecmd->port = PORT_MII;
69
70 /* only supports internal transceiver */
71 ecmd->transceiver = XCVR_INTERNAL;
72
73 /* this isn't fully supported at higher layers */
74 ecmd->phy_address = mii->phy_id;
75 ecmd->mdio_support = ETH_MDIO_SUPPORTS_C22;
76
77 ecmd->advertising = ADVERTISED_TP | ADVERTISED_MII;
78
79 bmcr = mii->mdio_read(dev, mii->phy_id, MII_BMCR);
80 bmsr = mii->mdio_read(dev, mii->phy_id, MII_BMSR);
81 if (mii->supports_gmii) {
82 ctrl1000 = mii->mdio_read(dev, mii->phy_id, MII_CTRL1000);
83 stat1000 = mii->mdio_read(dev, mii->phy_id, MII_STAT1000);
84 }
85
86 ecmd->advertising |= mii_get_an(mii, MII_ADVERTISE);
87 if (mii->supports_gmii)
88 ecmd->advertising |=
89 mii_ctrl1000_to_ethtool_adv_t(ctrl1000);
90
91 if (bmcr & BMCR_ANENABLE) {
92 ecmd->advertising |= ADVERTISED_Autoneg;
93 ecmd->autoneg = AUTONEG_ENABLE;
94
95 if (bmsr & BMSR_ANEGCOMPLETE) {
96 ecmd->lp_advertising = mii_get_an(mii, MII_LPA);
97 ecmd->lp_advertising |=
98 mii_stat1000_to_ethtool_lpa_t(stat1000);
99 } else {
100 ecmd->lp_advertising = 0;
101 }
102
103 nego = ecmd->advertising & ecmd->lp_advertising;
104
105 if (nego & (ADVERTISED_1000baseT_Full |
106 ADVERTISED_1000baseT_Half)) {
107 ethtool_cmd_speed_set(ecmd, SPEED_1000);
108 ecmd->duplex = !!(nego & ADVERTISED_1000baseT_Full);
109 } else if (nego & (ADVERTISED_100baseT_Full |
110 ADVERTISED_100baseT_Half)) {
111 ethtool_cmd_speed_set(ecmd, SPEED_100);
112 ecmd->duplex = !!(nego & ADVERTISED_100baseT_Full);
113 } else {
114 ethtool_cmd_speed_set(ecmd, SPEED_10);
115 ecmd->duplex = !!(nego & ADVERTISED_10baseT_Full);
116 }
117 } else {
118 ecmd->autoneg = AUTONEG_DISABLE;
119
120 ethtool_cmd_speed_set(ecmd,
121 ((bmcr & BMCR_SPEED1000 &&
122 (bmcr & BMCR_SPEED100) == 0) ?
123 SPEED_1000 :
124 ((bmcr & BMCR_SPEED100) ?
125 SPEED_100 : SPEED_10)));
126 ecmd->duplex = (bmcr & BMCR_FULLDPLX) ? DUPLEX_FULL : DUPLEX_HALF;
127 }
128
129 mii->full_duplex = ecmd->duplex;
130
131 /* ignore maxtxpkt, maxrxpkt for now */
132}
133
134/**
135 * mii_ethtool_get_link_ksettings - get settings that are specified in @cmd
136 * @mii: MII interface
137 * @cmd: requested ethtool_link_ksettings
138 *
139 * The @cmd parameter is expected to have been cleared before calling
140 * mii_ethtool_get_link_ksettings().
141 */
142void mii_ethtool_get_link_ksettings(struct mii_if_info *mii,
143 struct ethtool_link_ksettings *cmd)
144{
145 struct net_device *dev = mii->dev;
146 u16 bmcr, bmsr, ctrl1000 = 0, stat1000 = 0;
147 u32 nego, supported, advertising, lp_advertising;
148
149 supported = (SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full |
150 SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full |
151 SUPPORTED_Autoneg | SUPPORTED_TP | SUPPORTED_MII);
152 if (mii->supports_gmii)
153 supported |= SUPPORTED_1000baseT_Half |
154 SUPPORTED_1000baseT_Full;
155
156 /* only supports twisted-pair */
157 cmd->base.port = PORT_MII;
158
159 /* this isn't fully supported at higher layers */
160 cmd->base.phy_address = mii->phy_id;
161 cmd->base.mdio_support = ETH_MDIO_SUPPORTS_C22;
162
163 advertising = ADVERTISED_TP | ADVERTISED_MII;
164
165 bmcr = mii->mdio_read(dev, mii->phy_id, MII_BMCR);
166 bmsr = mii->mdio_read(dev, mii->phy_id, MII_BMSR);
167 if (mii->supports_gmii) {
168 ctrl1000 = mii->mdio_read(dev, mii->phy_id, MII_CTRL1000);
169 stat1000 = mii->mdio_read(dev, mii->phy_id, MII_STAT1000);
170 }
171
172 advertising |= mii_get_an(mii, MII_ADVERTISE);
173 if (mii->supports_gmii)
174 advertising |= mii_ctrl1000_to_ethtool_adv_t(ctrl1000);
175
176 if (bmcr & BMCR_ANENABLE) {
177 advertising |= ADVERTISED_Autoneg;
178 cmd->base.autoneg = AUTONEG_ENABLE;
179
180 if (bmsr & BMSR_ANEGCOMPLETE) {
181 lp_advertising = mii_get_an(mii, MII_LPA);
182 lp_advertising |=
183 mii_stat1000_to_ethtool_lpa_t(stat1000);
184 } else {
185 lp_advertising = 0;
186 }
187
188 nego = advertising & lp_advertising;
189
190 if (nego & (ADVERTISED_1000baseT_Full |
191 ADVERTISED_1000baseT_Half)) {
192 cmd->base.speed = SPEED_1000;
193 cmd->base.duplex = !!(nego & ADVERTISED_1000baseT_Full);
194 } else if (nego & (ADVERTISED_100baseT_Full |
195 ADVERTISED_100baseT_Half)) {
196 cmd->base.speed = SPEED_100;
197 cmd->base.duplex = !!(nego & ADVERTISED_100baseT_Full);
198 } else {
199 cmd->base.speed = SPEED_10;
200 cmd->base.duplex = !!(nego & ADVERTISED_10baseT_Full);
201 }
202 } else {
203 cmd->base.autoneg = AUTONEG_DISABLE;
204
205 cmd->base.speed = ((bmcr & BMCR_SPEED1000 &&
206 (bmcr & BMCR_SPEED100) == 0) ?
207 SPEED_1000 :
208 ((bmcr & BMCR_SPEED100) ?
209 SPEED_100 : SPEED_10));
210 cmd->base.duplex = (bmcr & BMCR_FULLDPLX) ?
211 DUPLEX_FULL : DUPLEX_HALF;
212
213 lp_advertising = 0;
214 }
215
216 mii->full_duplex = cmd->base.duplex;
217
218 ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.supported,
219 supported);
220 ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.advertising,
221 advertising);
222 ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.lp_advertising,
223 lp_advertising);
224
225 /* ignore maxtxpkt, maxrxpkt for now */
226}
227
228/**
229 * mii_ethtool_sset - set settings that are specified in @ecmd
230 * @mii: MII interface
231 * @ecmd: requested ethtool_cmd
232 *
233 * Returns 0 for success, negative on error.
234 */
235int mii_ethtool_sset(struct mii_if_info *mii, struct ethtool_cmd *ecmd)
236{
237 struct net_device *dev = mii->dev;
238 u32 speed = ethtool_cmd_speed(ecmd);
239
240 if (speed != SPEED_10 &&
241 speed != SPEED_100 &&
242 speed != SPEED_1000)
243 return -EINVAL;
244 if (ecmd->duplex != DUPLEX_HALF && ecmd->duplex != DUPLEX_FULL)
245 return -EINVAL;
246 if (ecmd->port != PORT_MII)
247 return -EINVAL;
248 if (ecmd->transceiver != XCVR_INTERNAL)
249 return -EINVAL;
250 if (ecmd->phy_address != mii->phy_id)
251 return -EINVAL;
252 if (ecmd->autoneg != AUTONEG_DISABLE && ecmd->autoneg != AUTONEG_ENABLE)
253 return -EINVAL;
254 if ((speed == SPEED_1000) && (!mii->supports_gmii))
255 return -EINVAL;
256
257 /* ignore supported, maxtxpkt, maxrxpkt */
258
259 if (ecmd->autoneg == AUTONEG_ENABLE) {
260 u32 bmcr, advert, tmp;
261 u32 advert2 = 0, tmp2 = 0;
262
263 if ((ecmd->advertising & (ADVERTISED_10baseT_Half |
264 ADVERTISED_10baseT_Full |
265 ADVERTISED_100baseT_Half |
266 ADVERTISED_100baseT_Full |
267 ADVERTISED_1000baseT_Half |
268 ADVERTISED_1000baseT_Full)) == 0)
269 return -EINVAL;
270
271 /* advertise only what has been requested */
272 advert = mii->mdio_read(dev, mii->phy_id, MII_ADVERTISE);
273 tmp = advert & ~(ADVERTISE_ALL | ADVERTISE_100BASE4);
274 if (mii->supports_gmii) {
275 advert2 = mii->mdio_read(dev, mii->phy_id, MII_CTRL1000);
276 tmp2 = advert2 & ~(ADVERTISE_1000HALF | ADVERTISE_1000FULL);
277 }
278 tmp |= ethtool_adv_to_mii_adv_t(ecmd->advertising);
279
280 if (mii->supports_gmii)
281 tmp2 |=
282 ethtool_adv_to_mii_ctrl1000_t(ecmd->advertising);
283 if (advert != tmp) {
284 mii->mdio_write(dev, mii->phy_id, MII_ADVERTISE, tmp);
285 mii->advertising = tmp;
286 }
287 if ((mii->supports_gmii) && (advert2 != tmp2))
288 mii->mdio_write(dev, mii->phy_id, MII_CTRL1000, tmp2);
289
290 /* turn on autonegotiation, and force a renegotiate */
291 bmcr = mii->mdio_read(dev, mii->phy_id, MII_BMCR);
292 bmcr |= (BMCR_ANENABLE | BMCR_ANRESTART);
293 mii->mdio_write(dev, mii->phy_id, MII_BMCR, bmcr);
294
295 mii->force_media = 0;
296 } else {
297 u32 bmcr, tmp;
298
299 /* turn off auto negotiation, set speed and duplexity */
300 bmcr = mii->mdio_read(dev, mii->phy_id, MII_BMCR);
301 tmp = bmcr & ~(BMCR_ANENABLE | BMCR_SPEED100 |
302 BMCR_SPEED1000 | BMCR_FULLDPLX);
303 if (speed == SPEED_1000)
304 tmp |= BMCR_SPEED1000;
305 else if (speed == SPEED_100)
306 tmp |= BMCR_SPEED100;
307 if (ecmd->duplex == DUPLEX_FULL) {
308 tmp |= BMCR_FULLDPLX;
309 mii->full_duplex = 1;
310 } else
311 mii->full_duplex = 0;
312 if (bmcr != tmp)
313 mii->mdio_write(dev, mii->phy_id, MII_BMCR, tmp);
314
315 mii->force_media = 1;
316 }
317 return 0;
318}
319
320/**
321 * mii_ethtool_set_link_ksettings - set settings that are specified in @cmd
322 * @mii: MII interfaces
323 * @cmd: requested ethtool_link_ksettings
324 *
325 * Returns 0 for success, negative on error.
326 */
327int mii_ethtool_set_link_ksettings(struct mii_if_info *mii,
328 const struct ethtool_link_ksettings *cmd)
329{
330 struct net_device *dev = mii->dev;
331 u32 speed = cmd->base.speed;
332
333 if (speed != SPEED_10 &&
334 speed != SPEED_100 &&
335 speed != SPEED_1000)
336 return -EINVAL;
337 if (cmd->base.duplex != DUPLEX_HALF && cmd->base.duplex != DUPLEX_FULL)
338 return -EINVAL;
339 if (cmd->base.port != PORT_MII)
340 return -EINVAL;
341 if (cmd->base.phy_address != mii->phy_id)
342 return -EINVAL;
343 if (cmd->base.autoneg != AUTONEG_DISABLE &&
344 cmd->base.autoneg != AUTONEG_ENABLE)
345 return -EINVAL;
346 if ((speed == SPEED_1000) && (!mii->supports_gmii))
347 return -EINVAL;
348
349 /* ignore supported, maxtxpkt, maxrxpkt */
350
351 if (cmd->base.autoneg == AUTONEG_ENABLE) {
352 u32 bmcr, advert, tmp;
353 u32 advert2 = 0, tmp2 = 0;
354 u32 advertising;
355
356 ethtool_convert_link_mode_to_legacy_u32(
357 &advertising, cmd->link_modes.advertising);
358
359 if ((advertising & (ADVERTISED_10baseT_Half |
360 ADVERTISED_10baseT_Full |
361 ADVERTISED_100baseT_Half |
362 ADVERTISED_100baseT_Full |
363 ADVERTISED_1000baseT_Half |
364 ADVERTISED_1000baseT_Full)) == 0)
365 return -EINVAL;
366
367 /* advertise only what has been requested */
368 advert = mii->mdio_read(dev, mii->phy_id, MII_ADVERTISE);
369 tmp = advert & ~(ADVERTISE_ALL | ADVERTISE_100BASE4);
370 if (mii->supports_gmii) {
371 advert2 = mii->mdio_read(dev, mii->phy_id,
372 MII_CTRL1000);
373 tmp2 = advert2 &
374 ~(ADVERTISE_1000HALF | ADVERTISE_1000FULL);
375 }
376 tmp |= ethtool_adv_to_mii_adv_t(advertising);
377
378 if (mii->supports_gmii)
379 tmp2 |= ethtool_adv_to_mii_ctrl1000_t(advertising);
380 if (advert != tmp) {
381 mii->mdio_write(dev, mii->phy_id, MII_ADVERTISE, tmp);
382 mii->advertising = tmp;
383 }
384 if ((mii->supports_gmii) && (advert2 != tmp2))
385 mii->mdio_write(dev, mii->phy_id, MII_CTRL1000, tmp2);
386
387 /* turn on autonegotiation, and force a renegotiate */
388 bmcr = mii->mdio_read(dev, mii->phy_id, MII_BMCR);
389 bmcr |= (BMCR_ANENABLE | BMCR_ANRESTART);
390 mii->mdio_write(dev, mii->phy_id, MII_BMCR, bmcr);
391
392 mii->force_media = 0;
393 } else {
394 u32 bmcr, tmp;
395
396 /* turn off auto negotiation, set speed and duplexity */
397 bmcr = mii->mdio_read(dev, mii->phy_id, MII_BMCR);
398 tmp = bmcr & ~(BMCR_ANENABLE | BMCR_SPEED100 |
399 BMCR_SPEED1000 | BMCR_FULLDPLX);
400 if (speed == SPEED_1000)
401 tmp |= BMCR_SPEED1000;
402 else if (speed == SPEED_100)
403 tmp |= BMCR_SPEED100;
404 if (cmd->base.duplex == DUPLEX_FULL) {
405 tmp |= BMCR_FULLDPLX;
406 mii->full_duplex = 1;
407 } else {
408 mii->full_duplex = 0;
409 }
410 if (bmcr != tmp)
411 mii->mdio_write(dev, mii->phy_id, MII_BMCR, tmp);
412
413 mii->force_media = 1;
414 }
415 return 0;
416}
417
418/**
419 * mii_check_gmii_support - check if the MII supports Gb interfaces
420 * @mii: the MII interface
421 */
422int mii_check_gmii_support(struct mii_if_info *mii)
423{
424 int reg;
425
426 reg = mii->mdio_read(mii->dev, mii->phy_id, MII_BMSR);
427 if (reg & BMSR_ESTATEN) {
428 reg = mii->mdio_read(mii->dev, mii->phy_id, MII_ESTATUS);
429 if (reg & (ESTATUS_1000_TFULL | ESTATUS_1000_THALF))
430 return 1;
431 }
432
433 return 0;
434}
435
436/**
437 * mii_link_ok - is link status up/ok
438 * @mii: the MII interface
439 *
440 * Returns 1 if the MII reports link status up/ok, 0 otherwise.
441 */
442int mii_link_ok (struct mii_if_info *mii)
443{
444 /* first, a dummy read, needed to latch some MII phys */
445 mii->mdio_read(mii->dev, mii->phy_id, MII_BMSR);
446 if (mii->mdio_read(mii->dev, mii->phy_id, MII_BMSR) & BMSR_LSTATUS)
447 return 1;
448 return 0;
449}
450
451/**
452 * mii_nway_restart - restart NWay (autonegotiation) for this interface
453 * @mii: the MII interface
454 *
455 * Returns 0 on success, negative on error.
456 */
457int mii_nway_restart (struct mii_if_info *mii)
458{
459 int bmcr;
460 int r = -EINVAL;
461
462 /* if autoneg is off, it's an error */
463 bmcr = mii->mdio_read(mii->dev, mii->phy_id, MII_BMCR);
464
465 if (bmcr & BMCR_ANENABLE) {
466 bmcr |= BMCR_ANRESTART;
467 mii->mdio_write(mii->dev, mii->phy_id, MII_BMCR, bmcr);
468 r = 0;
469 }
470
471 return r;
472}
473
474/**
475 * mii_check_link - check MII link status
476 * @mii: MII interface
477 *
478 * If the link status changed (previous != current), call
479 * netif_carrier_on() if current link status is Up or call
480 * netif_carrier_off() if current link status is Down.
481 */
482void mii_check_link (struct mii_if_info *mii)
483{
484 int cur_link = mii_link_ok(mii);
485 int prev_link = netif_carrier_ok(mii->dev);
486
487 if (cur_link && !prev_link)
488 netif_carrier_on(mii->dev);
489 else if (prev_link && !cur_link)
490 netif_carrier_off(mii->dev);
491}
492
493/**
494 * mii_check_media - check the MII interface for a carrier/speed/duplex change
495 * @mii: the MII interface
496 * @ok_to_print: OK to print link up/down messages
497 * @init_media: OK to save duplex mode in @mii
498 *
499 * Returns 1 if the duplex mode changed, 0 if not.
500 * If the media type is forced, always returns 0.
501 */
502unsigned int mii_check_media (struct mii_if_info *mii,
503 unsigned int ok_to_print,
504 unsigned int init_media)
505{
506 unsigned int old_carrier, new_carrier;
507 int advertise, lpa, media, duplex;
508 int lpa2 = 0;
509
510 /* check current and old link status */
511 old_carrier = netif_carrier_ok(mii->dev) ? 1 : 0;
512 new_carrier = (unsigned int) mii_link_ok(mii);
513
514 /* if carrier state did not change, this is a "bounce",
515 * just exit as everything is already set correctly
516 */
517 if ((!init_media) && (old_carrier == new_carrier))
518 return 0; /* duplex did not change */
519
520 /* no carrier, nothing much to do */
521 if (!new_carrier) {
522 netif_carrier_off(mii->dev);
523 if (ok_to_print)
524 netdev_info(mii->dev, "link down\n");
525 return 0; /* duplex did not change */
526 }
527
528 /*
529 * we have carrier, see who's on the other end
530 */
531 netif_carrier_on(mii->dev);
532
533 if (mii->force_media) {
534 if (ok_to_print)
535 netdev_info(mii->dev, "link up\n");
536 return 0; /* duplex did not change */
537 }
538
539 /* get MII advertise and LPA values */
540 if ((!init_media) && (mii->advertising))
541 advertise = mii->advertising;
542 else {
543 advertise = mii->mdio_read(mii->dev, mii->phy_id, MII_ADVERTISE);
544 mii->advertising = advertise;
545 }
546 lpa = mii->mdio_read(mii->dev, mii->phy_id, MII_LPA);
547 if (mii->supports_gmii)
548 lpa2 = mii->mdio_read(mii->dev, mii->phy_id, MII_STAT1000);
549
550 /* figure out media and duplex from advertise and LPA values */
551 media = mii_nway_result(lpa & advertise);
552 duplex = (media & ADVERTISE_FULL) ? 1 : 0;
553 if (lpa2 & LPA_1000FULL)
554 duplex = 1;
555
556 if (ok_to_print)
557 netdev_info(mii->dev, "link up, %uMbps, %s-duplex, lpa 0x%04X\n",
558 lpa2 & (LPA_1000FULL | LPA_1000HALF) ? 1000 :
559 media & (ADVERTISE_100FULL | ADVERTISE_100HALF) ?
560 100 : 10,
561 duplex ? "full" : "half",
562 lpa);
563
564 if ((init_media) || (mii->full_duplex != duplex)) {
565 mii->full_duplex = duplex;
566 return 1; /* duplex changed */
567 }
568
569 return 0; /* duplex did not change */
570}
571
572/**
573 * generic_mii_ioctl - main MII ioctl interface
574 * @mii_if: the MII interface
575 * @mii_data: MII ioctl data structure
576 * @cmd: MII ioctl command
577 * @duplex_chg_out: pointer to @duplex_changed status if there was no
578 * ioctl error
579 *
580 * Returns 0 on success, negative on error.
581 */
582int generic_mii_ioctl(struct mii_if_info *mii_if,
583 struct mii_ioctl_data *mii_data, int cmd,
584 unsigned int *duplex_chg_out)
585{
586 int rc = 0;
587 unsigned int duplex_changed = 0;
588
589 if (duplex_chg_out)
590 *duplex_chg_out = 0;
591
592 mii_data->phy_id &= mii_if->phy_id_mask;
593 mii_data->reg_num &= mii_if->reg_num_mask;
594
595 switch(cmd) {
596 case SIOCGMIIPHY:
597 mii_data->phy_id = mii_if->phy_id;
598 fallthrough;
599
600 case SIOCGMIIREG:
601 mii_data->val_out =
602 mii_if->mdio_read(mii_if->dev, mii_data->phy_id,
603 mii_data->reg_num);
604 break;
605
606 case SIOCSMIIREG: {
607 u16 val = mii_data->val_in;
608
609 if (mii_data->phy_id == mii_if->phy_id) {
610 switch(mii_data->reg_num) {
611 case MII_BMCR: {
612 unsigned int new_duplex = 0;
613 if (val & (BMCR_RESET|BMCR_ANENABLE))
614 mii_if->force_media = 0;
615 else
616 mii_if->force_media = 1;
617 if (mii_if->force_media &&
618 (val & BMCR_FULLDPLX))
619 new_duplex = 1;
620 if (mii_if->full_duplex != new_duplex) {
621 duplex_changed = 1;
622 mii_if->full_duplex = new_duplex;
623 }
624 break;
625 }
626 case MII_ADVERTISE:
627 mii_if->advertising = val;
628 break;
629 default:
630 /* do nothing */
631 break;
632 }
633 }
634
635 mii_if->mdio_write(mii_if->dev, mii_data->phy_id,
636 mii_data->reg_num, val);
637 break;
638 }
639
640 default:
641 rc = -EOPNOTSUPP;
642 break;
643 }
644
645 if ((rc == 0) && (duplex_chg_out) && (duplex_changed))
646 *duplex_chg_out = 1;
647
648 return rc;
649}
650
651MODULE_AUTHOR ("Jeff Garzik <jgarzik@pobox.com>");
652MODULE_DESCRIPTION ("MII hardware support library");
653MODULE_LICENSE("GPL");
654
655EXPORT_SYMBOL(mii_link_ok);
656EXPORT_SYMBOL(mii_nway_restart);
657EXPORT_SYMBOL(mii_ethtool_gset);
658EXPORT_SYMBOL(mii_ethtool_get_link_ksettings);
659EXPORT_SYMBOL(mii_ethtool_sset);
660EXPORT_SYMBOL(mii_ethtool_set_link_ksettings);
661EXPORT_SYMBOL(mii_check_link);
662EXPORT_SYMBOL(mii_check_media);
663EXPORT_SYMBOL(mii_check_gmii_support);
664EXPORT_SYMBOL(generic_mii_ioctl);
665
1/*
2
3 mii.c: MII interface library
4
5 Maintained by Jeff Garzik <jgarzik@pobox.com>
6 Copyright 2001,2002 Jeff Garzik
7
8 Various code came from myson803.c and other files by
9 Donald Becker. Copyright:
10
11 Written 1998-2002 by Donald Becker.
12
13 This software may be used and distributed according
14 to the terms of the GNU General Public License (GPL),
15 incorporated herein by reference. Drivers based on
16 or derived from this code fall under the GPL and must
17 retain the authorship, copyright and license notice.
18 This file is not a complete program and may only be
19 used when the entire operating system is licensed
20 under the GPL.
21
22 The author may be reached as becker@scyld.com, or C/O
23 Scyld Computing Corporation
24 410 Severn Ave., Suite 210
25 Annapolis MD 21403
26
27
28 */
29
30#include <linux/kernel.h>
31#include <linux/module.h>
32#include <linux/netdevice.h>
33#include <linux/ethtool.h>
34#include <linux/mii.h>
35
36static u32 mii_get_an(struct mii_if_info *mii, u16 addr)
37{
38 int advert;
39
40 advert = mii->mdio_read(mii->dev, mii->phy_id, addr);
41
42 return mii_lpa_to_ethtool_lpa_t(advert);
43}
44
45/**
46 * mii_ethtool_gset - get settings that are specified in @ecmd
47 * @mii: MII interface
48 * @ecmd: requested ethtool_cmd
49 *
50 * The @ecmd parameter is expected to have been cleared before calling
51 * mii_ethtool_gset().
52 *
53 * Returns 0 for success, negative on error.
54 */
55int mii_ethtool_gset(struct mii_if_info *mii, struct ethtool_cmd *ecmd)
56{
57 struct net_device *dev = mii->dev;
58 u16 bmcr, bmsr, ctrl1000 = 0, stat1000 = 0;
59 u32 nego;
60
61 ecmd->supported =
62 (SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full |
63 SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full |
64 SUPPORTED_Autoneg | SUPPORTED_TP | SUPPORTED_MII);
65 if (mii->supports_gmii)
66 ecmd->supported |= SUPPORTED_1000baseT_Half |
67 SUPPORTED_1000baseT_Full;
68
69 /* only supports twisted-pair */
70 ecmd->port = PORT_MII;
71
72 /* only supports internal transceiver */
73 ecmd->transceiver = XCVR_INTERNAL;
74
75 /* this isn't fully supported at higher layers */
76 ecmd->phy_address = mii->phy_id;
77 ecmd->mdio_support = ETH_MDIO_SUPPORTS_C22;
78
79 ecmd->advertising = ADVERTISED_TP | ADVERTISED_MII;
80
81 bmcr = mii->mdio_read(dev, mii->phy_id, MII_BMCR);
82 bmsr = mii->mdio_read(dev, mii->phy_id, MII_BMSR);
83 if (mii->supports_gmii) {
84 ctrl1000 = mii->mdio_read(dev, mii->phy_id, MII_CTRL1000);
85 stat1000 = mii->mdio_read(dev, mii->phy_id, MII_STAT1000);
86 }
87 if (bmcr & BMCR_ANENABLE) {
88 ecmd->advertising |= ADVERTISED_Autoneg;
89 ecmd->autoneg = AUTONEG_ENABLE;
90
91 ecmd->advertising |= mii_get_an(mii, MII_ADVERTISE);
92 if (mii->supports_gmii)
93 ecmd->advertising |=
94 mii_ctrl1000_to_ethtool_adv_t(ctrl1000);
95
96 if (bmsr & BMSR_ANEGCOMPLETE) {
97 ecmd->lp_advertising = mii_get_an(mii, MII_LPA);
98 ecmd->lp_advertising |=
99 mii_stat1000_to_ethtool_lpa_t(stat1000);
100 } else {
101 ecmd->lp_advertising = 0;
102 }
103
104 nego = ecmd->advertising & ecmd->lp_advertising;
105
106 if (nego & (ADVERTISED_1000baseT_Full |
107 ADVERTISED_1000baseT_Half)) {
108 ethtool_cmd_speed_set(ecmd, SPEED_1000);
109 ecmd->duplex = !!(nego & ADVERTISED_1000baseT_Full);
110 } else if (nego & (ADVERTISED_100baseT_Full |
111 ADVERTISED_100baseT_Half)) {
112 ethtool_cmd_speed_set(ecmd, SPEED_100);
113 ecmd->duplex = !!(nego & ADVERTISED_100baseT_Full);
114 } else {
115 ethtool_cmd_speed_set(ecmd, SPEED_10);
116 ecmd->duplex = !!(nego & ADVERTISED_10baseT_Full);
117 }
118 } else {
119 ecmd->autoneg = AUTONEG_DISABLE;
120
121 ethtool_cmd_speed_set(ecmd,
122 ((bmcr & BMCR_SPEED1000 &&
123 (bmcr & BMCR_SPEED100) == 0) ?
124 SPEED_1000 :
125 ((bmcr & BMCR_SPEED100) ?
126 SPEED_100 : SPEED_10)));
127 ecmd->duplex = (bmcr & BMCR_FULLDPLX) ? DUPLEX_FULL : DUPLEX_HALF;
128 }
129
130 mii->full_duplex = ecmd->duplex;
131
132 /* ignore maxtxpkt, maxrxpkt for now */
133
134 return 0;
135}
136
137/**
138 * mii_ethtool_get_link_ksettings - get settings that are specified in @cmd
139 * @mii: MII interface
140 * @cmd: requested ethtool_link_ksettings
141 *
142 * The @cmd parameter is expected to have been cleared before calling
143 * mii_ethtool_get_link_ksettings().
144 */
145void mii_ethtool_get_link_ksettings(struct mii_if_info *mii,
146 struct ethtool_link_ksettings *cmd)
147{
148 struct net_device *dev = mii->dev;
149 u16 bmcr, bmsr, ctrl1000 = 0, stat1000 = 0;
150 u32 nego, supported, advertising, lp_advertising;
151
152 supported = (SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full |
153 SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full |
154 SUPPORTED_Autoneg | SUPPORTED_TP | SUPPORTED_MII);
155 if (mii->supports_gmii)
156 supported |= SUPPORTED_1000baseT_Half |
157 SUPPORTED_1000baseT_Full;
158
159 /* only supports twisted-pair */
160 cmd->base.port = PORT_MII;
161
162 /* this isn't fully supported at higher layers */
163 cmd->base.phy_address = mii->phy_id;
164 cmd->base.mdio_support = ETH_MDIO_SUPPORTS_C22;
165
166 advertising = ADVERTISED_TP | ADVERTISED_MII;
167
168 bmcr = mii->mdio_read(dev, mii->phy_id, MII_BMCR);
169 bmsr = mii->mdio_read(dev, mii->phy_id, MII_BMSR);
170 if (mii->supports_gmii) {
171 ctrl1000 = mii->mdio_read(dev, mii->phy_id, MII_CTRL1000);
172 stat1000 = mii->mdio_read(dev, mii->phy_id, MII_STAT1000);
173 }
174 if (bmcr & BMCR_ANENABLE) {
175 advertising |= ADVERTISED_Autoneg;
176 cmd->base.autoneg = AUTONEG_ENABLE;
177
178 advertising |= mii_get_an(mii, MII_ADVERTISE);
179 if (mii->supports_gmii)
180 advertising |= mii_ctrl1000_to_ethtool_adv_t(ctrl1000);
181
182 if (bmsr & BMSR_ANEGCOMPLETE) {
183 lp_advertising = mii_get_an(mii, MII_LPA);
184 lp_advertising |=
185 mii_stat1000_to_ethtool_lpa_t(stat1000);
186 } else {
187 lp_advertising = 0;
188 }
189
190 nego = advertising & lp_advertising;
191
192 if (nego & (ADVERTISED_1000baseT_Full |
193 ADVERTISED_1000baseT_Half)) {
194 cmd->base.speed = SPEED_1000;
195 cmd->base.duplex = !!(nego & ADVERTISED_1000baseT_Full);
196 } else if (nego & (ADVERTISED_100baseT_Full |
197 ADVERTISED_100baseT_Half)) {
198 cmd->base.speed = SPEED_100;
199 cmd->base.duplex = !!(nego & ADVERTISED_100baseT_Full);
200 } else {
201 cmd->base.speed = SPEED_10;
202 cmd->base.duplex = !!(nego & ADVERTISED_10baseT_Full);
203 }
204 } else {
205 cmd->base.autoneg = AUTONEG_DISABLE;
206
207 cmd->base.speed = ((bmcr & BMCR_SPEED1000 &&
208 (bmcr & BMCR_SPEED100) == 0) ?
209 SPEED_1000 :
210 ((bmcr & BMCR_SPEED100) ?
211 SPEED_100 : SPEED_10));
212 cmd->base.duplex = (bmcr & BMCR_FULLDPLX) ?
213 DUPLEX_FULL : DUPLEX_HALF;
214
215 lp_advertising = 0;
216 }
217
218 mii->full_duplex = cmd->base.duplex;
219
220 ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.supported,
221 supported);
222 ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.advertising,
223 advertising);
224 ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.lp_advertising,
225 lp_advertising);
226
227 /* ignore maxtxpkt, maxrxpkt for now */
228}
229
230/**
231 * mii_ethtool_sset - set settings that are specified in @ecmd
232 * @mii: MII interface
233 * @ecmd: requested ethtool_cmd
234 *
235 * Returns 0 for success, negative on error.
236 */
237int mii_ethtool_sset(struct mii_if_info *mii, struct ethtool_cmd *ecmd)
238{
239 struct net_device *dev = mii->dev;
240 u32 speed = ethtool_cmd_speed(ecmd);
241
242 if (speed != SPEED_10 &&
243 speed != SPEED_100 &&
244 speed != SPEED_1000)
245 return -EINVAL;
246 if (ecmd->duplex != DUPLEX_HALF && ecmd->duplex != DUPLEX_FULL)
247 return -EINVAL;
248 if (ecmd->port != PORT_MII)
249 return -EINVAL;
250 if (ecmd->transceiver != XCVR_INTERNAL)
251 return -EINVAL;
252 if (ecmd->phy_address != mii->phy_id)
253 return -EINVAL;
254 if (ecmd->autoneg != AUTONEG_DISABLE && ecmd->autoneg != AUTONEG_ENABLE)
255 return -EINVAL;
256 if ((speed == SPEED_1000) && (!mii->supports_gmii))
257 return -EINVAL;
258
259 /* ignore supported, maxtxpkt, maxrxpkt */
260
261 if (ecmd->autoneg == AUTONEG_ENABLE) {
262 u32 bmcr, advert, tmp;
263 u32 advert2 = 0, tmp2 = 0;
264
265 if ((ecmd->advertising & (ADVERTISED_10baseT_Half |
266 ADVERTISED_10baseT_Full |
267 ADVERTISED_100baseT_Half |
268 ADVERTISED_100baseT_Full |
269 ADVERTISED_1000baseT_Half |
270 ADVERTISED_1000baseT_Full)) == 0)
271 return -EINVAL;
272
273 /* advertise only what has been requested */
274 advert = mii->mdio_read(dev, mii->phy_id, MII_ADVERTISE);
275 tmp = advert & ~(ADVERTISE_ALL | ADVERTISE_100BASE4);
276 if (mii->supports_gmii) {
277 advert2 = mii->mdio_read(dev, mii->phy_id, MII_CTRL1000);
278 tmp2 = advert2 & ~(ADVERTISE_1000HALF | ADVERTISE_1000FULL);
279 }
280 tmp |= ethtool_adv_to_mii_adv_t(ecmd->advertising);
281
282 if (mii->supports_gmii)
283 tmp2 |=
284 ethtool_adv_to_mii_ctrl1000_t(ecmd->advertising);
285 if (advert != tmp) {
286 mii->mdio_write(dev, mii->phy_id, MII_ADVERTISE, tmp);
287 mii->advertising = tmp;
288 }
289 if ((mii->supports_gmii) && (advert2 != tmp2))
290 mii->mdio_write(dev, mii->phy_id, MII_CTRL1000, tmp2);
291
292 /* turn on autonegotiation, and force a renegotiate */
293 bmcr = mii->mdio_read(dev, mii->phy_id, MII_BMCR);
294 bmcr |= (BMCR_ANENABLE | BMCR_ANRESTART);
295 mii->mdio_write(dev, mii->phy_id, MII_BMCR, bmcr);
296
297 mii->force_media = 0;
298 } else {
299 u32 bmcr, tmp;
300
301 /* turn off auto negotiation, set speed and duplexity */
302 bmcr = mii->mdio_read(dev, mii->phy_id, MII_BMCR);
303 tmp = bmcr & ~(BMCR_ANENABLE | BMCR_SPEED100 |
304 BMCR_SPEED1000 | BMCR_FULLDPLX);
305 if (speed == SPEED_1000)
306 tmp |= BMCR_SPEED1000;
307 else if (speed == SPEED_100)
308 tmp |= BMCR_SPEED100;
309 if (ecmd->duplex == DUPLEX_FULL) {
310 tmp |= BMCR_FULLDPLX;
311 mii->full_duplex = 1;
312 } else
313 mii->full_duplex = 0;
314 if (bmcr != tmp)
315 mii->mdio_write(dev, mii->phy_id, MII_BMCR, tmp);
316
317 mii->force_media = 1;
318 }
319 return 0;
320}
321
322/**
323 * mii_ethtool_set_link_ksettings - set settings that are specified in @cmd
324 * @mii: MII interfaces
325 * @cmd: requested ethtool_link_ksettings
326 *
327 * Returns 0 for success, negative on error.
328 */
329int mii_ethtool_set_link_ksettings(struct mii_if_info *mii,
330 const struct ethtool_link_ksettings *cmd)
331{
332 struct net_device *dev = mii->dev;
333 u32 speed = cmd->base.speed;
334
335 if (speed != SPEED_10 &&
336 speed != SPEED_100 &&
337 speed != SPEED_1000)
338 return -EINVAL;
339 if (cmd->base.duplex != DUPLEX_HALF && cmd->base.duplex != DUPLEX_FULL)
340 return -EINVAL;
341 if (cmd->base.port != PORT_MII)
342 return -EINVAL;
343 if (cmd->base.phy_address != mii->phy_id)
344 return -EINVAL;
345 if (cmd->base.autoneg != AUTONEG_DISABLE &&
346 cmd->base.autoneg != AUTONEG_ENABLE)
347 return -EINVAL;
348 if ((speed == SPEED_1000) && (!mii->supports_gmii))
349 return -EINVAL;
350
351 /* ignore supported, maxtxpkt, maxrxpkt */
352
353 if (cmd->base.autoneg == AUTONEG_ENABLE) {
354 u32 bmcr, advert, tmp;
355 u32 advert2 = 0, tmp2 = 0;
356 u32 advertising;
357
358 ethtool_convert_link_mode_to_legacy_u32(
359 &advertising, cmd->link_modes.advertising);
360
361 if ((advertising & (ADVERTISED_10baseT_Half |
362 ADVERTISED_10baseT_Full |
363 ADVERTISED_100baseT_Half |
364 ADVERTISED_100baseT_Full |
365 ADVERTISED_1000baseT_Half |
366 ADVERTISED_1000baseT_Full)) == 0)
367 return -EINVAL;
368
369 /* advertise only what has been requested */
370 advert = mii->mdio_read(dev, mii->phy_id, MII_ADVERTISE);
371 tmp = advert & ~(ADVERTISE_ALL | ADVERTISE_100BASE4);
372 if (mii->supports_gmii) {
373 advert2 = mii->mdio_read(dev, mii->phy_id,
374 MII_CTRL1000);
375 tmp2 = advert2 &
376 ~(ADVERTISE_1000HALF | ADVERTISE_1000FULL);
377 }
378 tmp |= ethtool_adv_to_mii_adv_t(advertising);
379
380 if (mii->supports_gmii)
381 tmp2 |= ethtool_adv_to_mii_ctrl1000_t(advertising);
382 if (advert != tmp) {
383 mii->mdio_write(dev, mii->phy_id, MII_ADVERTISE, tmp);
384 mii->advertising = tmp;
385 }
386 if ((mii->supports_gmii) && (advert2 != tmp2))
387 mii->mdio_write(dev, mii->phy_id, MII_CTRL1000, tmp2);
388
389 /* turn on autonegotiation, and force a renegotiate */
390 bmcr = mii->mdio_read(dev, mii->phy_id, MII_BMCR);
391 bmcr |= (BMCR_ANENABLE | BMCR_ANRESTART);
392 mii->mdio_write(dev, mii->phy_id, MII_BMCR, bmcr);
393
394 mii->force_media = 0;
395 } else {
396 u32 bmcr, tmp;
397
398 /* turn off auto negotiation, set speed and duplexity */
399 bmcr = mii->mdio_read(dev, mii->phy_id, MII_BMCR);
400 tmp = bmcr & ~(BMCR_ANENABLE | BMCR_SPEED100 |
401 BMCR_SPEED1000 | BMCR_FULLDPLX);
402 if (speed == SPEED_1000)
403 tmp |= BMCR_SPEED1000;
404 else if (speed == SPEED_100)
405 tmp |= BMCR_SPEED100;
406 if (cmd->base.duplex == DUPLEX_FULL) {
407 tmp |= BMCR_FULLDPLX;
408 mii->full_duplex = 1;
409 } else {
410 mii->full_duplex = 0;
411 }
412 if (bmcr != tmp)
413 mii->mdio_write(dev, mii->phy_id, MII_BMCR, tmp);
414
415 mii->force_media = 1;
416 }
417 return 0;
418}
419
420/**
421 * mii_check_gmii_support - check if the MII supports Gb interfaces
422 * @mii: the MII interface
423 */
424int mii_check_gmii_support(struct mii_if_info *mii)
425{
426 int reg;
427
428 reg = mii->mdio_read(mii->dev, mii->phy_id, MII_BMSR);
429 if (reg & BMSR_ESTATEN) {
430 reg = mii->mdio_read(mii->dev, mii->phy_id, MII_ESTATUS);
431 if (reg & (ESTATUS_1000_TFULL | ESTATUS_1000_THALF))
432 return 1;
433 }
434
435 return 0;
436}
437
438/**
439 * mii_link_ok - is link status up/ok
440 * @mii: the MII interface
441 *
442 * Returns 1 if the MII reports link status up/ok, 0 otherwise.
443 */
444int mii_link_ok (struct mii_if_info *mii)
445{
446 /* first, a dummy read, needed to latch some MII phys */
447 mii->mdio_read(mii->dev, mii->phy_id, MII_BMSR);
448 if (mii->mdio_read(mii->dev, mii->phy_id, MII_BMSR) & BMSR_LSTATUS)
449 return 1;
450 return 0;
451}
452
453/**
454 * mii_nway_restart - restart NWay (autonegotiation) for this interface
455 * @mii: the MII interface
456 *
457 * Returns 0 on success, negative on error.
458 */
459int mii_nway_restart (struct mii_if_info *mii)
460{
461 int bmcr;
462 int r = -EINVAL;
463
464 /* if autoneg is off, it's an error */
465 bmcr = mii->mdio_read(mii->dev, mii->phy_id, MII_BMCR);
466
467 if (bmcr & BMCR_ANENABLE) {
468 bmcr |= BMCR_ANRESTART;
469 mii->mdio_write(mii->dev, mii->phy_id, MII_BMCR, bmcr);
470 r = 0;
471 }
472
473 return r;
474}
475
476/**
477 * mii_check_link - check MII link status
478 * @mii: MII interface
479 *
480 * If the link status changed (previous != current), call
481 * netif_carrier_on() if current link status is Up or call
482 * netif_carrier_off() if current link status is Down.
483 */
484void mii_check_link (struct mii_if_info *mii)
485{
486 int cur_link = mii_link_ok(mii);
487 int prev_link = netif_carrier_ok(mii->dev);
488
489 if (cur_link && !prev_link)
490 netif_carrier_on(mii->dev);
491 else if (prev_link && !cur_link)
492 netif_carrier_off(mii->dev);
493}
494
495/**
496 * mii_check_media - check the MII interface for a carrier/speed/duplex change
497 * @mii: the MII interface
498 * @ok_to_print: OK to print link up/down messages
499 * @init_media: OK to save duplex mode in @mii
500 *
501 * Returns 1 if the duplex mode changed, 0 if not.
502 * If the media type is forced, always returns 0.
503 */
504unsigned int mii_check_media (struct mii_if_info *mii,
505 unsigned int ok_to_print,
506 unsigned int init_media)
507{
508 unsigned int old_carrier, new_carrier;
509 int advertise, lpa, media, duplex;
510 int lpa2 = 0;
511
512 /* check current and old link status */
513 old_carrier = netif_carrier_ok(mii->dev) ? 1 : 0;
514 new_carrier = (unsigned int) mii_link_ok(mii);
515
516 /* if carrier state did not change, this is a "bounce",
517 * just exit as everything is already set correctly
518 */
519 if ((!init_media) && (old_carrier == new_carrier))
520 return 0; /* duplex did not change */
521
522 /* no carrier, nothing much to do */
523 if (!new_carrier) {
524 netif_carrier_off(mii->dev);
525 if (ok_to_print)
526 netdev_info(mii->dev, "link down\n");
527 return 0; /* duplex did not change */
528 }
529
530 /*
531 * we have carrier, see who's on the other end
532 */
533 netif_carrier_on(mii->dev);
534
535 if (mii->force_media) {
536 if (ok_to_print)
537 netdev_info(mii->dev, "link up\n");
538 return 0; /* duplex did not change */
539 }
540
541 /* get MII advertise and LPA values */
542 if ((!init_media) && (mii->advertising))
543 advertise = mii->advertising;
544 else {
545 advertise = mii->mdio_read(mii->dev, mii->phy_id, MII_ADVERTISE);
546 mii->advertising = advertise;
547 }
548 lpa = mii->mdio_read(mii->dev, mii->phy_id, MII_LPA);
549 if (mii->supports_gmii)
550 lpa2 = mii->mdio_read(mii->dev, mii->phy_id, MII_STAT1000);
551
552 /* figure out media and duplex from advertise and LPA values */
553 media = mii_nway_result(lpa & advertise);
554 duplex = (media & ADVERTISE_FULL) ? 1 : 0;
555 if (lpa2 & LPA_1000FULL)
556 duplex = 1;
557
558 if (ok_to_print)
559 netdev_info(mii->dev, "link up, %uMbps, %s-duplex, lpa 0x%04X\n",
560 lpa2 & (LPA_1000FULL | LPA_1000HALF) ? 1000 :
561 media & (ADVERTISE_100FULL | ADVERTISE_100HALF) ?
562 100 : 10,
563 duplex ? "full" : "half",
564 lpa);
565
566 if ((init_media) || (mii->full_duplex != duplex)) {
567 mii->full_duplex = duplex;
568 return 1; /* duplex changed */
569 }
570
571 return 0; /* duplex did not change */
572}
573
574/**
575 * generic_mii_ioctl - main MII ioctl interface
576 * @mii_if: the MII interface
577 * @mii_data: MII ioctl data structure
578 * @cmd: MII ioctl command
579 * @duplex_chg_out: pointer to @duplex_changed status if there was no
580 * ioctl error
581 *
582 * Returns 0 on success, negative on error.
583 */
584int generic_mii_ioctl(struct mii_if_info *mii_if,
585 struct mii_ioctl_data *mii_data, int cmd,
586 unsigned int *duplex_chg_out)
587{
588 int rc = 0;
589 unsigned int duplex_changed = 0;
590
591 if (duplex_chg_out)
592 *duplex_chg_out = 0;
593
594 mii_data->phy_id &= mii_if->phy_id_mask;
595 mii_data->reg_num &= mii_if->reg_num_mask;
596
597 switch(cmd) {
598 case SIOCGMIIPHY:
599 mii_data->phy_id = mii_if->phy_id;
600 /* fall through */
601
602 case SIOCGMIIREG:
603 mii_data->val_out =
604 mii_if->mdio_read(mii_if->dev, mii_data->phy_id,
605 mii_data->reg_num);
606 break;
607
608 case SIOCSMIIREG: {
609 u16 val = mii_data->val_in;
610
611 if (mii_data->phy_id == mii_if->phy_id) {
612 switch(mii_data->reg_num) {
613 case MII_BMCR: {
614 unsigned int new_duplex = 0;
615 if (val & (BMCR_RESET|BMCR_ANENABLE))
616 mii_if->force_media = 0;
617 else
618 mii_if->force_media = 1;
619 if (mii_if->force_media &&
620 (val & BMCR_FULLDPLX))
621 new_duplex = 1;
622 if (mii_if->full_duplex != new_duplex) {
623 duplex_changed = 1;
624 mii_if->full_duplex = new_duplex;
625 }
626 break;
627 }
628 case MII_ADVERTISE:
629 mii_if->advertising = val;
630 break;
631 default:
632 /* do nothing */
633 break;
634 }
635 }
636
637 mii_if->mdio_write(mii_if->dev, mii_data->phy_id,
638 mii_data->reg_num, val);
639 break;
640 }
641
642 default:
643 rc = -EOPNOTSUPP;
644 break;
645 }
646
647 if ((rc == 0) && (duplex_chg_out) && (duplex_changed))
648 *duplex_chg_out = 1;
649
650 return rc;
651}
652
653MODULE_AUTHOR ("Jeff Garzik <jgarzik@pobox.com>");
654MODULE_DESCRIPTION ("MII hardware support library");
655MODULE_LICENSE("GPL");
656
657EXPORT_SYMBOL(mii_link_ok);
658EXPORT_SYMBOL(mii_nway_restart);
659EXPORT_SYMBOL(mii_ethtool_gset);
660EXPORT_SYMBOL(mii_ethtool_get_link_ksettings);
661EXPORT_SYMBOL(mii_ethtool_sset);
662EXPORT_SYMBOL(mii_ethtool_set_link_ksettings);
663EXPORT_SYMBOL(mii_check_link);
664EXPORT_SYMBOL(mii_check_media);
665EXPORT_SYMBOL(mii_check_gmii_support);
666EXPORT_SYMBOL(generic_mii_ioctl);
667