Loading...
1# SPDX-License-Identifier: GPL-2.0-only
2
3menuconfig CAN_DEV
4 tristate "CAN Device Drivers"
5 default y
6 depends on CAN
7 help
8 Controller Area Network (CAN) is serial communications protocol up to
9 1Mbit/s for its original release (now known as Classical CAN) and up
10 to 8Mbit/s for the more recent CAN with Flexible Data-Rate
11 (CAN-FD). The CAN bus was originally mainly for automotive, but is now
12 widely used in marine (NMEA2000), industrial, and medical
13 applications. More information on the CAN network protocol family
14 PF_CAN is contained in <Documentation/networking/can.rst>.
15
16 This section contains all the CAN(-FD) device drivers including the
17 virtual ones. If you own such devices or plan to use the virtual CAN
18 interfaces to develop applications, say Y here.
19
20 To compile as a module, choose M here: the module will be called
21 can-dev.
22
23if CAN_DEV
24
25config CAN_VCAN
26 tristate "Virtual Local CAN Interface (vcan)"
27 help
28 Similar to the network loopback devices, vcan offers a
29 virtual local CAN interface.
30
31 This driver can also be built as a module. If so, the module
32 will be called vcan.
33
34config CAN_VXCAN
35 tristate "Virtual CAN Tunnel (vxcan)"
36 help
37 Similar to the virtual ethernet driver veth, vxcan implements a
38 local CAN traffic tunnel between two virtual CAN network devices.
39 When creating a vxcan, two vxcan devices are created as pair.
40 When one end receives the packet it appears on its pair and vice
41 versa. The vxcan can be used for cross namespace communication.
42
43 In opposite to vcan loopback devices the vxcan only forwards CAN
44 frames to its pair and does *not* provide a local echo of sent
45 CAN frames. To disable a potential echo in af_can.c the vxcan driver
46 announces IFF_ECHO in the interface flags. To have a clean start
47 in each namespace the CAN GW hop counter is set to zero.
48
49 This driver can also be built as a module. If so, the module
50 will be called vxcan.
51
52config CAN_NETLINK
53 bool "CAN device drivers with Netlink support"
54 default y
55 help
56 Enables the common framework for CAN device drivers. This is the
57 standard library and provides features for the Netlink interface such
58 as bittiming validation, support of CAN error states, device restart
59 and others.
60
61 The additional features selected by this option will be added to the
62 can-dev module.
63
64 This is required by all platform and hardware CAN drivers. If you
65 plan to use such devices or if unsure, say Y.
66
67if CAN_NETLINK
68
69config CAN_CALC_BITTIMING
70 bool "CAN bit-timing calculation"
71 default y
72 help
73 If enabled, CAN bit-timing parameters will be calculated for the
74 bit-rate specified via Netlink argument "bitrate" when the device
75 get started. This works fine for the most common CAN controllers
76 with standard bit-rates but may fail for exotic bit-rates or CAN
77 source clock frequencies. Disabling saves some space, but then the
78 bit-timing parameters must be specified directly using the Netlink
79 arguments "tq", "prop_seg", "phase_seg1", "phase_seg2" and "sjw".
80
81 The additional features selected by this option will be added to the
82 can-dev module.
83
84 If unsure, say Y.
85
86config CAN_RX_OFFLOAD
87 bool
88
89config CAN_AT91
90 tristate "Atmel AT91 onchip CAN controller"
91 depends on (ARCH_AT91 || COMPILE_TEST) && HAS_IOMEM
92 select CAN_RX_OFFLOAD
93 help
94 This is a driver for the SoC CAN controller in Atmel's AT91SAM9263
95 and AT91SAM9X5 processors.
96
97config CAN_BXCAN
98 tristate "STM32 Basic Extended CAN (bxCAN) devices"
99 depends on ARCH_STM32 || COMPILE_TEST
100 depends on HAS_IOMEM
101 select CAN_RX_OFFLOAD
102 help
103 Say yes here to build support for the STMicroelectronics STM32 basic
104 extended CAN Controller (bxCAN).
105
106 This driver can also be built as a module. If so, the module
107 will be called bxcan.
108
109config CAN_CAN327
110 tristate "Serial / USB serial ELM327 based OBD-II Interfaces (can327)"
111 depends on TTY
112 select CAN_RX_OFFLOAD
113 help
114 CAN driver for several 'low cost' OBD-II interfaces based on the
115 ELM327 OBD-II interpreter chip.
116
117 This is a best effort driver - the ELM327 interface was never
118 designed to be used as a standalone CAN interface. However, it can
119 still be used for simple request-response protocols (such as OBD II),
120 and to monitor broadcast messages on a bus (such as in a vehicle).
121
122 Please refer to the documentation for information on how to use it:
123 Documentation/networking/device_drivers/can/can327.rst
124
125 If this driver is built as a module, it will be called can327.
126
127config CAN_FLEXCAN
128 tristate "Support for Freescale FLEXCAN based chips"
129 depends on OF || COLDFIRE || COMPILE_TEST
130 depends on HAS_IOMEM
131 select CAN_RX_OFFLOAD
132 help
133 Say Y here if you want to support for Freescale FlexCAN.
134
135config CAN_GRCAN
136 tristate "Aeroflex Gaisler GRCAN and GRHCAN CAN devices"
137 depends on OF && HAS_DMA && HAS_IOMEM
138 help
139 Say Y here if you want to use Aeroflex Gaisler GRCAN or GRHCAN.
140 Note that the driver supports little endian, even though little
141 endian syntheses of the cores would need some modifications on
142 the hardware level to work.
143
144config CAN_JANZ_ICAN3
145 tristate "Janz VMOD-ICAN3 Intelligent CAN controller"
146 depends on MFD_JANZ_CMODIO
147 help
148 Driver for Janz VMOD-ICAN3 Intelligent CAN controller module, which
149 connects to a MODULbus carrier board.
150
151 This driver can also be built as a module. If so, the module will be
152 called janz-ican3.ko.
153
154config CAN_KVASER_PCIEFD
155 depends on PCI
156 tristate "Kvaser PCIe FD cards"
157 help
158 This is a driver for the Kvaser PCI Express CAN FD family.
159
160 Supported devices:
161 Kvaser PCIEcan 4xHS
162 Kvaser PCIEcan 2xHS v2
163 Kvaser PCIEcan HS v2
164 Kvaser PCIEcan 1xCAN v3
165 Kvaser PCIEcan 2xCAN v3
166 Kvaser PCIEcan 4xCAN v2
167 Kvaser Mini PCI Express HS v2
168 Kvaser Mini PCI Express 2xHS v2
169 Kvaser Mini PCI Express 1xCAN v3
170 Kvaser Mini PCI Express 2xCAN v3
171
172config CAN_SLCAN
173 tristate "Serial / USB serial CAN Adaptors (slcan)"
174 depends on TTY
175 help
176 CAN driver for several 'low cost' CAN interfaces that are attached
177 via serial lines or via USB-to-serial adapters using the LAWICEL
178 ASCII protocol. The driver implements the tty linediscipline N_SLCAN.
179
180 As only the sending and receiving of CAN frames is implemented, this
181 driver should work with the (serial/USB) CAN hardware from:
182 www.canusb.com / www.can232.com / www.mictronics.de / www.canhack.de
183
184 Userspace tools to attach the SLCAN line discipline (slcan_attach,
185 slcand) can be found in the can-utils at the linux-can project, see
186 https://github.com/linux-can/can-utils for details.
187
188 The slcan driver supports up to 10 CAN netdevices by default which
189 can be changed by the 'maxdev=xx' module option. This driver can
190 also be built as a module. If so, the module will be called slcan.
191
192config CAN_SUN4I
193 tristate "Allwinner A10 CAN controller"
194 depends on MACH_SUN4I || MACH_SUN7I || (RISCV && ARCH_SUNXI) || COMPILE_TEST
195 help
196 Say Y here if you want to use CAN controller found on Allwinner
197 A10/A20/D1 SoCs.
198
199 To compile this driver as a module, choose M here: the module will
200 be called sun4i_can.
201
202config CAN_TI_HECC
203 depends on ARM
204 tristate "TI High End CAN Controller"
205 select CAN_RX_OFFLOAD
206 help
207 Driver for TI HECC (High End CAN Controller) module found on many
208 TI devices. The device specifications are available from www.ti.com
209
210config CAN_XILINXCAN
211 tristate "Xilinx CAN"
212 depends on ARCH_ZYNQ || ARM64 || MICROBLAZE || COMPILE_TEST
213 depends on COMMON_CLK && HAS_IOMEM
214 help
215 Xilinx CAN driver. This driver supports both soft AXI CAN IP and
216 Zynq CANPS IP.
217
218source "drivers/net/can/c_can/Kconfig"
219source "drivers/net/can/cc770/Kconfig"
220source "drivers/net/can/ctucanfd/Kconfig"
221source "drivers/net/can/ifi_canfd/Kconfig"
222source "drivers/net/can/m_can/Kconfig"
223source "drivers/net/can/mscan/Kconfig"
224source "drivers/net/can/peak_canfd/Kconfig"
225source "drivers/net/can/rcar/Kconfig"
226source "drivers/net/can/sja1000/Kconfig"
227source "drivers/net/can/softing/Kconfig"
228source "drivers/net/can/spi/Kconfig"
229source "drivers/net/can/usb/Kconfig"
230
231endif #CAN_NETLINK
232
233config CAN_DEBUG_DEVICES
234 bool "CAN devices debugging messages"
235 help
236 Say Y here if you want the CAN device drivers to produce a bunch of
237 debug messages to the system log. Select this if you are having
238 a problem with CAN support and want to see more of what is going
239 on.
240
241endif #CAN_DEV
1menu "CAN Device Drivers"
2
3config CAN_VCAN
4 tristate "Virtual Local CAN Interface (vcan)"
5 ---help---
6 Similar to the network loopback devices, vcan offers a
7 virtual local CAN interface.
8
9 This driver can also be built as a module. If so, the module
10 will be called vcan.
11
12config CAN_VXCAN
13 tristate "Virtual CAN Tunnel (vxcan)"
14 ---help---
15 Similar to the virtual ethernet driver veth, vxcan implements a
16 local CAN traffic tunnel between two virtual CAN network devices.
17 When creating a vxcan, two vxcan devices are created as pair.
18 When one end receives the packet it appears on its pair and vice
19 versa. The vxcan can be used for cross namespace communication.
20
21 In opposite to vcan loopback devices the vxcan only forwards CAN
22 frames to its pair and does *not* provide a local echo of sent
23 CAN frames. To disable a potential echo in af_can.c the vxcan driver
24 announces IFF_ECHO in the interface flags. To have a clean start
25 in each namespace the CAN GW hop counter is set to zero.
26
27 This driver can also be built as a module. If so, the module
28 will be called vxcan.
29
30config CAN_SLCAN
31 tristate "Serial / USB serial CAN Adaptors (slcan)"
32 depends on TTY
33 ---help---
34 CAN driver for several 'low cost' CAN interfaces that are attached
35 via serial lines or via USB-to-serial adapters using the LAWICEL
36 ASCII protocol. The driver implements the tty linediscipline N_SLCAN.
37
38 As only the sending and receiving of CAN frames is implemented, this
39 driver should work with the (serial/USB) CAN hardware from:
40 www.canusb.com / www.can232.com / www.mictronics.de / www.canhack.de
41
42 Userspace tools to attach the SLCAN line discipline (slcan_attach,
43 slcand) can be found in the can-utils at the SocketCAN SVN, see
44 http://developer.berlios.de/projects/socketcan for details.
45
46 The slcan driver supports up to 10 CAN netdevices by default which
47 can be changed by the 'maxdev=xx' module option. This driver can
48 also be built as a module. If so, the module will be called slcan.
49
50config CAN_DEV
51 tristate "Platform CAN drivers with Netlink support"
52 default y
53 ---help---
54 Enables the common framework for platform CAN drivers with Netlink
55 support. This is the standard library for CAN drivers.
56 If unsure, say Y.
57
58if CAN_DEV
59
60config CAN_CALC_BITTIMING
61 bool "CAN bit-timing calculation"
62 default y
63 ---help---
64 If enabled, CAN bit-timing parameters will be calculated for the
65 bit-rate specified via Netlink argument "bitrate" when the device
66 get started. This works fine for the most common CAN controllers
67 with standard bit-rates but may fail for exotic bit-rates or CAN
68 source clock frequencies. Disabling saves some space, but then the
69 bit-timing parameters must be specified directly using the Netlink
70 arguments "tq", "prop_seg", "phase_seg1", "phase_seg2" and "sjw".
71 If unsure, say Y.
72
73config CAN_LEDS
74 bool "Enable LED triggers for Netlink based drivers"
75 depends on LEDS_CLASS
76 select LEDS_TRIGGERS
77 ---help---
78 This option adds two LED triggers for packet receive and transmit
79 events on each supported CAN device.
80
81 Say Y here if you are working on a system with led-class supported
82 LEDs and you want to use them as canbus activity indicators.
83
84config CAN_AT91
85 tristate "Atmel AT91 onchip CAN controller"
86 depends on (ARCH_AT91 || COMPILE_TEST) && HAS_IOMEM
87 ---help---
88 This is a driver for the SoC CAN controller in Atmel's AT91SAM9263
89 and AT91SAM9X5 processors.
90
91config CAN_FLEXCAN
92 tristate "Support for Freescale FLEXCAN based chips"
93 depends on ARM || PPC
94 ---help---
95 Say Y here if you want to support for Freescale FlexCAN.
96
97config CAN_GRCAN
98 tristate "Aeroflex Gaisler GRCAN and GRHCAN CAN devices"
99 depends on OF && HAS_DMA
100 ---help---
101 Say Y here if you want to use Aeroflex Gaisler GRCAN or GRHCAN.
102 Note that the driver supports little endian, even though little
103 endian syntheses of the cores would need some modifications on
104 the hardware level to work.
105
106config CAN_JANZ_ICAN3
107 tristate "Janz VMOD-ICAN3 Intelligent CAN controller"
108 depends on MFD_JANZ_CMODIO
109 ---help---
110 Driver for Janz VMOD-ICAN3 Intelligent CAN controller module, which
111 connects to a MODULbus carrier board.
112
113 This driver can also be built as a module. If so, the module will be
114 called janz-ican3.ko.
115
116config CAN_SUN4I
117 tristate "Allwinner A10 CAN controller"
118 depends on MACH_SUN4I || MACH_SUN7I || COMPILE_TEST
119 ---help---
120 Say Y here if you want to use CAN controller found on Allwinner
121 A10/A20 SoCs.
122
123 To compile this driver as a module, choose M here: the module will
124 be called sun4i_can.
125
126config CAN_TI_HECC
127 depends on ARM
128 tristate "TI High End CAN Controller"
129 ---help---
130 Driver for TI HECC (High End CAN Controller) module found on many
131 TI devices. The device specifications are available from www.ti.com
132
133config CAN_XILINXCAN
134 tristate "Xilinx CAN"
135 depends on ARCH_ZYNQ || ARM64 || MICROBLAZE || COMPILE_TEST
136 depends on COMMON_CLK && HAS_IOMEM
137 ---help---
138 Xilinx CAN driver. This driver supports both soft AXI CAN IP and
139 Zynq CANPS IP.
140
141config PCH_CAN
142 tristate "Intel EG20T PCH CAN controller"
143 depends on PCI && (X86_32 || COMPILE_TEST)
144 ---help---
145 This driver is for PCH CAN of Topcliff (Intel EG20T PCH) which
146 is an IOH for x86 embedded processor (Intel Atom E6xx series).
147 This driver can access CAN bus.
148
149source "drivers/net/can/c_can/Kconfig"
150source "drivers/net/can/cc770/Kconfig"
151source "drivers/net/can/ifi_canfd/Kconfig"
152source "drivers/net/can/m_can/Kconfig"
153source "drivers/net/can/mscan/Kconfig"
154source "drivers/net/can/peak_canfd/Kconfig"
155source "drivers/net/can/rcar/Kconfig"
156source "drivers/net/can/sja1000/Kconfig"
157source "drivers/net/can/softing/Kconfig"
158source "drivers/net/can/spi/Kconfig"
159source "drivers/net/can/usb/Kconfig"
160
161endif
162
163config CAN_DEBUG_DEVICES
164 bool "CAN devices debugging messages"
165 ---help---
166 Say Y here if you want the CAN device drivers to produce a bunch of
167 debug messages to the system log. Select this if you are having
168 a problem with CAN support and want to see more of what is going
169 on.
170
171endmenu