Loading...
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Driver for simulating a mouse on GPIO lines.
4 *
5 * Copyright (C) 2007 Atmel Corporation
6 * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
7 */
8
9#include <linux/module.h>
10#include <linux/platform_device.h>
11#include <linux/input.h>
12#include <linux/gpio/consumer.h>
13#include <linux/property.h>
14#include <linux/of.h>
15
16/**
17 * struct gpio_mouse
18 * @scan_ms: the scan interval in milliseconds.
19 * @up: GPIO line for up value.
20 * @down: GPIO line for down value.
21 * @left: GPIO line for left value.
22 * @right: GPIO line for right value.
23 * @bleft: GPIO line for left button.
24 * @bmiddle: GPIO line for middle button.
25 * @bright: GPIO line for right button.
26 *
27 * This struct must be added to the platform_device in the board code.
28 * It is used by the gpio_mouse driver to setup GPIO lines and to
29 * calculate mouse movement.
30 */
31struct gpio_mouse {
32 u32 scan_ms;
33 struct gpio_desc *up;
34 struct gpio_desc *down;
35 struct gpio_desc *left;
36 struct gpio_desc *right;
37 struct gpio_desc *bleft;
38 struct gpio_desc *bmiddle;
39 struct gpio_desc *bright;
40};
41
42/*
43 * Timer function which is run every scan_ms ms when the device is opened.
44 * The dev input variable is set to the input_dev pointer.
45 */
46static void gpio_mouse_scan(struct input_dev *input)
47{
48 struct gpio_mouse *gpio = input_get_drvdata(input);
49 int x, y;
50
51 if (gpio->bleft)
52 input_report_key(input, BTN_LEFT,
53 gpiod_get_value(gpio->bleft));
54 if (gpio->bmiddle)
55 input_report_key(input, BTN_MIDDLE,
56 gpiod_get_value(gpio->bmiddle));
57 if (gpio->bright)
58 input_report_key(input, BTN_RIGHT,
59 gpiod_get_value(gpio->bright));
60
61 x = gpiod_get_value(gpio->right) - gpiod_get_value(gpio->left);
62 y = gpiod_get_value(gpio->down) - gpiod_get_value(gpio->up);
63
64 input_report_rel(input, REL_X, x);
65 input_report_rel(input, REL_Y, y);
66 input_sync(input);
67}
68
69static int gpio_mouse_probe(struct platform_device *pdev)
70{
71 struct device *dev = &pdev->dev;
72 struct gpio_mouse *gmouse;
73 struct input_dev *input;
74 int error;
75
76 gmouse = devm_kzalloc(dev, sizeof(*gmouse), GFP_KERNEL);
77 if (!gmouse)
78 return -ENOMEM;
79
80 /* Assign some default scanning time */
81 error = device_property_read_u32(dev, "scan-interval-ms",
82 &gmouse->scan_ms);
83 if (error || gmouse->scan_ms == 0) {
84 dev_warn(dev, "invalid scan time, set to 50 ms\n");
85 gmouse->scan_ms = 50;
86 }
87
88 gmouse->up = devm_gpiod_get(dev, "up", GPIOD_IN);
89 if (IS_ERR(gmouse->up))
90 return PTR_ERR(gmouse->up);
91 gmouse->down = devm_gpiod_get(dev, "down", GPIOD_IN);
92 if (IS_ERR(gmouse->down))
93 return PTR_ERR(gmouse->down);
94 gmouse->left = devm_gpiod_get(dev, "left", GPIOD_IN);
95 if (IS_ERR(gmouse->left))
96 return PTR_ERR(gmouse->left);
97 gmouse->right = devm_gpiod_get(dev, "right", GPIOD_IN);
98 if (IS_ERR(gmouse->right))
99 return PTR_ERR(gmouse->right);
100
101 gmouse->bleft = devm_gpiod_get_optional(dev, "button-left", GPIOD_IN);
102 if (IS_ERR(gmouse->bleft))
103 return PTR_ERR(gmouse->bleft);
104 gmouse->bmiddle = devm_gpiod_get_optional(dev, "button-middle",
105 GPIOD_IN);
106 if (IS_ERR(gmouse->bmiddle))
107 return PTR_ERR(gmouse->bmiddle);
108 gmouse->bright = devm_gpiod_get_optional(dev, "button-right",
109 GPIOD_IN);
110 if (IS_ERR(gmouse->bright))
111 return PTR_ERR(gmouse->bright);
112
113 input = devm_input_allocate_device(dev);
114 if (!input)
115 return -ENOMEM;
116
117 input->name = pdev->name;
118 input->id.bustype = BUS_HOST;
119
120 input_set_drvdata(input, gmouse);
121
122 input_set_capability(input, EV_REL, REL_X);
123 input_set_capability(input, EV_REL, REL_Y);
124 if (gmouse->bleft)
125 input_set_capability(input, EV_KEY, BTN_LEFT);
126 if (gmouse->bmiddle)
127 input_set_capability(input, EV_KEY, BTN_MIDDLE);
128 if (gmouse->bright)
129 input_set_capability(input, EV_KEY, BTN_RIGHT);
130
131 error = input_setup_polling(input, gpio_mouse_scan);
132 if (error)
133 return error;
134
135 input_set_poll_interval(input, gmouse->scan_ms);
136
137 error = input_register_device(input);
138 if (error) {
139 dev_err(dev, "could not register input device\n");
140 return error;
141 }
142
143 dev_dbg(dev, "%d ms scan time, buttons: %s%s%s\n",
144 gmouse->scan_ms,
145 gmouse->bleft ? "" : "left ",
146 gmouse->bmiddle ? "" : "middle ",
147 gmouse->bright ? "" : "right");
148
149 return 0;
150}
151
152static const struct of_device_id gpio_mouse_of_match[] = {
153 { .compatible = "gpio-mouse", },
154 { },
155};
156MODULE_DEVICE_TABLE(of, gpio_mouse_of_match);
157
158static struct platform_driver gpio_mouse_device_driver = {
159 .probe = gpio_mouse_probe,
160 .driver = {
161 .name = "gpio_mouse",
162 .of_match_table = gpio_mouse_of_match,
163 }
164};
165module_platform_driver(gpio_mouse_device_driver);
166
167MODULE_AUTHOR("Hans-Christian Egtvedt <egtvedt@samfundet.no>");
168MODULE_DESCRIPTION("GPIO mouse driver");
169MODULE_LICENSE("GPL");
170MODULE_ALIAS("platform:gpio_mouse"); /* work with hotplug and coldplug */
1/*
2 * Driver for simulating a mouse on GPIO lines.
3 *
4 * Copyright (C) 2007 Atmel Corporation
5 * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2 as
9 * published by the Free Software Foundation.
10 */
11
12#include <linux/module.h>
13#include <linux/platform_device.h>
14#include <linux/input-polldev.h>
15#include <linux/gpio/consumer.h>
16#include <linux/property.h>
17#include <linux/of.h>
18
19/**
20 * struct gpio_mouse
21 * @scan_ms: the scan interval in milliseconds.
22 * @up: GPIO line for up value.
23 * @down: GPIO line for down value.
24 * @left: GPIO line for left value.
25 * @right: GPIO line for right value.
26 * @bleft: GPIO line for left button.
27 * @bmiddle: GPIO line for middle button.
28 * @bright: GPIO line for right button.
29 *
30 * This struct must be added to the platform_device in the board code.
31 * It is used by the gpio_mouse driver to setup GPIO lines and to
32 * calculate mouse movement.
33 */
34struct gpio_mouse {
35 u32 scan_ms;
36 struct gpio_desc *up;
37 struct gpio_desc *down;
38 struct gpio_desc *left;
39 struct gpio_desc *right;
40 struct gpio_desc *bleft;
41 struct gpio_desc *bmiddle;
42 struct gpio_desc *bright;
43};
44
45/*
46 * Timer function which is run every scan_ms ms when the device is opened.
47 * The dev input variable is set to the the input_dev pointer.
48 */
49static void gpio_mouse_scan(struct input_polled_dev *dev)
50{
51 struct gpio_mouse *gpio = dev->private;
52 struct input_dev *input = dev->input;
53 int x, y;
54
55 if (gpio->bleft)
56 input_report_key(input, BTN_LEFT,
57 gpiod_get_value(gpio->bleft));
58 if (gpio->bmiddle)
59 input_report_key(input, BTN_MIDDLE,
60 gpiod_get_value(gpio->bmiddle));
61 if (gpio->bright)
62 input_report_key(input, BTN_RIGHT,
63 gpiod_get_value(gpio->bright));
64
65 x = gpiod_get_value(gpio->right) - gpiod_get_value(gpio->left);
66 y = gpiod_get_value(gpio->down) - gpiod_get_value(gpio->up);
67
68 input_report_rel(input, REL_X, x);
69 input_report_rel(input, REL_Y, y);
70 input_sync(input);
71}
72
73static int gpio_mouse_probe(struct platform_device *pdev)
74{
75 struct device *dev = &pdev->dev;
76 struct gpio_mouse *gmouse;
77 struct input_polled_dev *input_poll;
78 struct input_dev *input;
79 int ret;
80
81 gmouse = devm_kzalloc(dev, sizeof(*gmouse), GFP_KERNEL);
82 if (!gmouse)
83 return -ENOMEM;
84
85 /* Assign some default scanning time */
86 ret = device_property_read_u32(dev, "scan-interval-ms",
87 &gmouse->scan_ms);
88 if (ret || gmouse->scan_ms == 0) {
89 dev_warn(dev, "invalid scan time, set to 50 ms\n");
90 gmouse->scan_ms = 50;
91 }
92
93 gmouse->up = devm_gpiod_get(dev, "up", GPIOD_IN);
94 if (IS_ERR(gmouse->up))
95 return PTR_ERR(gmouse->up);
96 gmouse->down = devm_gpiod_get(dev, "down", GPIOD_IN);
97 if (IS_ERR(gmouse->down))
98 return PTR_ERR(gmouse->down);
99 gmouse->left = devm_gpiod_get(dev, "left", GPIOD_IN);
100 if (IS_ERR(gmouse->left))
101 return PTR_ERR(gmouse->left);
102 gmouse->right = devm_gpiod_get(dev, "right", GPIOD_IN);
103 if (IS_ERR(gmouse->right))
104 return PTR_ERR(gmouse->right);
105
106 gmouse->bleft = devm_gpiod_get_optional(dev, "button-left", GPIOD_IN);
107 if (IS_ERR(gmouse->bleft))
108 return PTR_ERR(gmouse->bleft);
109 gmouse->bmiddle = devm_gpiod_get_optional(dev, "button-middle",
110 GPIOD_IN);
111 if (IS_ERR(gmouse->bmiddle))
112 return PTR_ERR(gmouse->bmiddle);
113 gmouse->bright = devm_gpiod_get_optional(dev, "button-right",
114 GPIOD_IN);
115 if (IS_ERR(gmouse->bright))
116 return PTR_ERR(gmouse->bright);
117
118 input_poll = devm_input_allocate_polled_device(dev);
119 if (!input_poll) {
120 dev_err(dev, "not enough memory for input device\n");
121 return -ENOMEM;
122 }
123
124 platform_set_drvdata(pdev, input_poll);
125
126 /* set input-polldev handlers */
127 input_poll->private = gmouse;
128 input_poll->poll = gpio_mouse_scan;
129 input_poll->poll_interval = gmouse->scan_ms;
130
131 input = input_poll->input;
132 input->name = pdev->name;
133 input->id.bustype = BUS_HOST;
134 input->dev.parent = &pdev->dev;
135
136 input_set_capability(input, EV_REL, REL_X);
137 input_set_capability(input, EV_REL, REL_Y);
138 if (gmouse->bleft)
139 input_set_capability(input, EV_KEY, BTN_LEFT);
140 if (gmouse->bmiddle)
141 input_set_capability(input, EV_KEY, BTN_MIDDLE);
142 if (gmouse->bright)
143 input_set_capability(input, EV_KEY, BTN_RIGHT);
144
145 ret = input_register_polled_device(input_poll);
146 if (ret) {
147 dev_err(dev, "could not register input device\n");
148 return ret;
149 }
150
151 dev_dbg(dev, "%d ms scan time, buttons: %s%s%s\n",
152 gmouse->scan_ms,
153 gmouse->bleft ? "" : "left ",
154 gmouse->bmiddle ? "" : "middle ",
155 gmouse->bright ? "" : "right");
156
157 return 0;
158}
159
160static const struct of_device_id gpio_mouse_of_match[] = {
161 { .compatible = "gpio-mouse", },
162 { },
163};
164MODULE_DEVICE_TABLE(of, gpio_mouse_of_match);
165
166static struct platform_driver gpio_mouse_device_driver = {
167 .probe = gpio_mouse_probe,
168 .driver = {
169 .name = "gpio_mouse",
170 .of_match_table = gpio_mouse_of_match,
171 }
172};
173module_platform_driver(gpio_mouse_device_driver);
174
175MODULE_AUTHOR("Hans-Christian Egtvedt <egtvedt@samfundet.no>");
176MODULE_DESCRIPTION("GPIO mouse driver");
177MODULE_LICENSE("GPL");
178MODULE_ALIAS("platform:gpio_mouse"); /* work with hotplug and coldplug */