Loading...
1/*
2 * net/tipc/core.c: TIPC module code
3 *
4 * Copyright (c) 2003-2006, 2013, Ericsson AB
5 * Copyright (c) 2005-2006, 2010-2013, Wind River Systems
6 * All rights reserved.
7 *
8 * Redistribution and use in source and binary forms, with or without
9 * modification, are permitted provided that the following conditions are met:
10 *
11 * 1. Redistributions of source code must retain the above copyright
12 * notice, this list of conditions and the following disclaimer.
13 * 2. Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in the
15 * documentation and/or other materials provided with the distribution.
16 * 3. Neither the names of the copyright holders nor the names of its
17 * contributors may be used to endorse or promote products derived from
18 * this software without specific prior written permission.
19 *
20 * Alternatively, this software may be distributed under the terms of the
21 * GNU General Public License ("GPL") version 2 as published by the Free
22 * Software Foundation.
23 *
24 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
25 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
26 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
27 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
28 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
29 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
30 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
31 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
32 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
33 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
34 * POSSIBILITY OF SUCH DAMAGE.
35 */
36
37#include "core.h"
38#include "name_table.h"
39#include "subscr.h"
40#include "bearer.h"
41#include "net.h"
42#include "socket.h"
43#include "bcast.h"
44#include "node.h"
45#include "crypto.h"
46
47#include <linux/module.h>
48
49/* configurable TIPC parameters */
50unsigned int tipc_net_id __read_mostly;
51int sysctl_tipc_rmem[3] __read_mostly; /* min/default/max */
52
53static int __net_init tipc_init_net(struct net *net)
54{
55 struct tipc_net *tn = net_generic(net, tipc_net_id);
56 int err;
57
58 tn->net_id = 4711;
59 tn->node_addr = 0;
60 tn->trial_addr = 0;
61 tn->addr_trial_end = 0;
62 tn->capabilities = TIPC_NODE_CAPABILITIES;
63 INIT_WORK(&tn->work, tipc_net_finalize_work);
64 memset(tn->node_id, 0, sizeof(tn->node_id));
65 memset(tn->node_id_string, 0, sizeof(tn->node_id_string));
66 tn->mon_threshold = TIPC_DEF_MON_THRESHOLD;
67 get_random_bytes(&tn->random, sizeof(int));
68 INIT_LIST_HEAD(&tn->node_list);
69 spin_lock_init(&tn->node_list_lock);
70
71#ifdef CONFIG_TIPC_CRYPTO
72 err = tipc_crypto_start(&tn->crypto_tx, net, NULL);
73 if (err)
74 goto out_crypto;
75#endif
76 err = tipc_sk_rht_init(net);
77 if (err)
78 goto out_sk_rht;
79
80 err = tipc_nametbl_init(net);
81 if (err)
82 goto out_nametbl;
83
84 err = tipc_bcast_init(net);
85 if (err)
86 goto out_bclink;
87
88 err = tipc_attach_loopback(net);
89 if (err)
90 goto out_bclink;
91
92 return 0;
93
94out_bclink:
95 tipc_nametbl_stop(net);
96out_nametbl:
97 tipc_sk_rht_destroy(net);
98out_sk_rht:
99
100#ifdef CONFIG_TIPC_CRYPTO
101 tipc_crypto_stop(&tn->crypto_tx);
102out_crypto:
103#endif
104 return err;
105}
106
107static void __net_exit tipc_exit_net(struct net *net)
108{
109 struct tipc_net *tn = tipc_net(net);
110
111 tipc_detach_loopback(net);
112 tipc_net_stop(net);
113 /* Make sure the tipc_net_finalize_work() finished */
114 cancel_work_sync(&tn->work);
115 tipc_bcast_stop(net);
116 tipc_nametbl_stop(net);
117 tipc_sk_rht_destroy(net);
118#ifdef CONFIG_TIPC_CRYPTO
119 tipc_crypto_stop(&tipc_net(net)->crypto_tx);
120#endif
121 while (atomic_read(&tn->wq_count))
122 cond_resched();
123}
124
125static void __net_exit tipc_pernet_pre_exit(struct net *net)
126{
127 tipc_node_pre_cleanup_net(net);
128}
129
130static struct pernet_operations tipc_pernet_pre_exit_ops = {
131 .pre_exit = tipc_pernet_pre_exit,
132};
133
134static struct pernet_operations tipc_net_ops = {
135 .init = tipc_init_net,
136 .exit = tipc_exit_net,
137 .id = &tipc_net_id,
138 .size = sizeof(struct tipc_net),
139};
140
141static struct pernet_operations tipc_topsrv_net_ops = {
142 .init = tipc_topsrv_init_net,
143 .exit = tipc_topsrv_exit_net,
144};
145
146static int __init tipc_init(void)
147{
148 int err;
149
150 pr_info("Activated (version " TIPC_MOD_VER ")\n");
151
152 sysctl_tipc_rmem[0] = RCVBUF_MIN;
153 sysctl_tipc_rmem[1] = RCVBUF_DEF;
154 sysctl_tipc_rmem[2] = RCVBUF_MAX;
155
156 err = tipc_register_sysctl();
157 if (err)
158 goto out_sysctl;
159
160 err = register_pernet_device(&tipc_net_ops);
161 if (err)
162 goto out_pernet;
163
164 err = tipc_socket_init();
165 if (err)
166 goto out_socket;
167
168 err = register_pernet_device(&tipc_topsrv_net_ops);
169 if (err)
170 goto out_pernet_topsrv;
171
172 err = register_pernet_subsys(&tipc_pernet_pre_exit_ops);
173 if (err)
174 goto out_register_pernet_subsys;
175
176 err = tipc_bearer_setup();
177 if (err)
178 goto out_bearer;
179
180 err = tipc_netlink_start();
181 if (err)
182 goto out_netlink;
183
184 err = tipc_netlink_compat_start();
185 if (err)
186 goto out_netlink_compat;
187
188 pr_info("Started in single node mode\n");
189 return 0;
190
191out_netlink_compat:
192 tipc_netlink_stop();
193out_netlink:
194 tipc_bearer_cleanup();
195out_bearer:
196 unregister_pernet_subsys(&tipc_pernet_pre_exit_ops);
197out_register_pernet_subsys:
198 unregister_pernet_device(&tipc_topsrv_net_ops);
199out_pernet_topsrv:
200 tipc_socket_stop();
201out_socket:
202 unregister_pernet_device(&tipc_net_ops);
203out_pernet:
204 tipc_unregister_sysctl();
205out_sysctl:
206 pr_err("Unable to start in single node mode\n");
207 return err;
208}
209
210static void __exit tipc_exit(void)
211{
212 tipc_netlink_compat_stop();
213 tipc_netlink_stop();
214 tipc_bearer_cleanup();
215 unregister_pernet_subsys(&tipc_pernet_pre_exit_ops);
216 unregister_pernet_device(&tipc_topsrv_net_ops);
217 tipc_socket_stop();
218 unregister_pernet_device(&tipc_net_ops);
219 tipc_unregister_sysctl();
220
221 pr_info("Deactivated\n");
222}
223
224module_init(tipc_init);
225module_exit(tipc_exit);
226
227MODULE_DESCRIPTION("TIPC: Transparent Inter Process Communication");
228MODULE_LICENSE("Dual BSD/GPL");
229MODULE_VERSION(TIPC_MOD_VER);
1/*
2 * net/tipc/core.c: TIPC module code
3 *
4 * Copyright (c) 2003-2006, 2013, Ericsson AB
5 * Copyright (c) 2005-2006, 2010-2013, Wind River Systems
6 * All rights reserved.
7 *
8 * Redistribution and use in source and binary forms, with or without
9 * modification, are permitted provided that the following conditions are met:
10 *
11 * 1. Redistributions of source code must retain the above copyright
12 * notice, this list of conditions and the following disclaimer.
13 * 2. Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in the
15 * documentation and/or other materials provided with the distribution.
16 * 3. Neither the names of the copyright holders nor the names of its
17 * contributors may be used to endorse or promote products derived from
18 * this software without specific prior written permission.
19 *
20 * Alternatively, this software may be distributed under the terms of the
21 * GNU General Public License ("GPL") version 2 as published by the Free
22 * Software Foundation.
23 *
24 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
25 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
26 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
27 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
28 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
29 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
30 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
31 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
32 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
33 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
34 * POSSIBILITY OF SUCH DAMAGE.
35 */
36
37#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
38
39#include "core.h"
40#include "name_table.h"
41#include "subscr.h"
42#include "bearer.h"
43#include "net.h"
44#include "socket.h"
45#include "bcast.h"
46
47#include <linux/module.h>
48
49/* configurable TIPC parameters */
50unsigned int tipc_net_id __read_mostly;
51int sysctl_tipc_rmem[3] __read_mostly; /* min/default/max */
52
53static int __net_init tipc_init_net(struct net *net)
54{
55 struct tipc_net *tn = net_generic(net, tipc_net_id);
56 int err;
57
58 tn->net_id = 4711;
59 tn->node_addr = 0;
60 tn->trial_addr = 0;
61 tn->addr_trial_end = 0;
62 memset(tn->node_id, 0, sizeof(tn->node_id));
63 memset(tn->node_id_string, 0, sizeof(tn->node_id_string));
64 tn->mon_threshold = TIPC_DEF_MON_THRESHOLD;
65 get_random_bytes(&tn->random, sizeof(int));
66 INIT_LIST_HEAD(&tn->node_list);
67 spin_lock_init(&tn->node_list_lock);
68
69 err = tipc_sk_rht_init(net);
70 if (err)
71 goto out_sk_rht;
72
73 err = tipc_nametbl_init(net);
74 if (err)
75 goto out_nametbl;
76
77 INIT_LIST_HEAD(&tn->dist_queue);
78 err = tipc_topsrv_start(net);
79 if (err)
80 goto out_subscr;
81
82 err = tipc_bcast_init(net);
83 if (err)
84 goto out_bclink;
85
86 return 0;
87
88out_bclink:
89 tipc_bcast_stop(net);
90out_subscr:
91 tipc_nametbl_stop(net);
92out_nametbl:
93 tipc_sk_rht_destroy(net);
94out_sk_rht:
95 return err;
96}
97
98static void __net_exit tipc_exit_net(struct net *net)
99{
100 tipc_topsrv_stop(net);
101 tipc_net_stop(net);
102 tipc_bcast_stop(net);
103 tipc_nametbl_stop(net);
104 tipc_sk_rht_destroy(net);
105}
106
107static struct pernet_operations tipc_net_ops = {
108 .init = tipc_init_net,
109 .exit = tipc_exit_net,
110 .id = &tipc_net_id,
111 .size = sizeof(struct tipc_net),
112};
113
114static int __init tipc_init(void)
115{
116 int err;
117
118 pr_info("Activated (version " TIPC_MOD_VER ")\n");
119
120 sysctl_tipc_rmem[0] = RCVBUF_MIN;
121 sysctl_tipc_rmem[1] = RCVBUF_DEF;
122 sysctl_tipc_rmem[2] = RCVBUF_MAX;
123
124 err = tipc_netlink_start();
125 if (err)
126 goto out_netlink;
127
128 err = tipc_netlink_compat_start();
129 if (err)
130 goto out_netlink_compat;
131
132 err = tipc_socket_init();
133 if (err)
134 goto out_socket;
135
136 err = tipc_register_sysctl();
137 if (err)
138 goto out_sysctl;
139
140 err = register_pernet_subsys(&tipc_net_ops);
141 if (err)
142 goto out_pernet;
143
144 err = tipc_bearer_setup();
145 if (err)
146 goto out_bearer;
147
148 pr_info("Started in single node mode\n");
149 return 0;
150out_bearer:
151 unregister_pernet_subsys(&tipc_net_ops);
152out_pernet:
153 tipc_unregister_sysctl();
154out_sysctl:
155 tipc_socket_stop();
156out_socket:
157 tipc_netlink_compat_stop();
158out_netlink_compat:
159 tipc_netlink_stop();
160out_netlink:
161 pr_err("Unable to start in single node mode\n");
162 return err;
163}
164
165static void __exit tipc_exit(void)
166{
167 tipc_bearer_cleanup();
168 unregister_pernet_subsys(&tipc_net_ops);
169 tipc_netlink_stop();
170 tipc_netlink_compat_stop();
171 tipc_socket_stop();
172 tipc_unregister_sysctl();
173
174 pr_info("Deactivated\n");
175}
176
177module_init(tipc_init);
178module_exit(tipc_exit);
179
180MODULE_DESCRIPTION("TIPC: Transparent Inter Process Communication");
181MODULE_LICENSE("Dual BSD/GPL");
182MODULE_VERSION(TIPC_MOD_VER);