Loading...
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * This file contains code to reset and initialize USB host controllers.
4 * Some of it includes work-arounds for PCI hardware and BIOS quirks.
5 * It may need to run early during booting -- before USB would normally
6 * initialize -- to ensure that Linux doesn't use any legacy modes.
7 *
8 * Copyright (c) 1999 Martin Mares <mj@ucw.cz>
9 * (and others)
10 */
11
12#include <linux/types.h>
13#include <linux/kernel.h>
14#include <linux/pci.h>
15#include <linux/delay.h>
16#include <linux/export.h>
17#include <linux/acpi.h>
18#include <linux/dmi.h>
19#include <linux/of.h>
20#include <linux/iopoll.h>
21
22#include "pci-quirks.h"
23#include "xhci-ext-caps.h"
24
25
26#define UHCI_USBLEGSUP 0xc0 /* legacy support */
27#define UHCI_USBCMD 0 /* command register */
28#define UHCI_USBINTR 4 /* interrupt register */
29#define UHCI_USBLEGSUP_RWC 0x8f00 /* the R/WC bits */
30#define UHCI_USBLEGSUP_RO 0x5040 /* R/O and reserved bits */
31#define UHCI_USBCMD_RUN 0x0001 /* RUN/STOP bit */
32#define UHCI_USBCMD_HCRESET 0x0002 /* Host Controller reset */
33#define UHCI_USBCMD_EGSM 0x0008 /* Global Suspend Mode */
34#define UHCI_USBCMD_CONFIGURE 0x0040 /* Config Flag */
35#define UHCI_USBINTR_RESUME 0x0002 /* Resume interrupt enable */
36
37#define OHCI_CONTROL 0x04
38#define OHCI_CMDSTATUS 0x08
39#define OHCI_INTRSTATUS 0x0c
40#define OHCI_INTRENABLE 0x10
41#define OHCI_INTRDISABLE 0x14
42#define OHCI_FMINTERVAL 0x34
43#define OHCI_HCFS (3 << 6) /* hc functional state */
44#define OHCI_HCR (1 << 0) /* host controller reset */
45#define OHCI_OCR (1 << 3) /* ownership change request */
46#define OHCI_CTRL_RWC (1 << 9) /* remote wakeup connected */
47#define OHCI_CTRL_IR (1 << 8) /* interrupt routing */
48#define OHCI_INTR_OC (1 << 30) /* ownership change */
49
50#define EHCI_HCC_PARAMS 0x08 /* extended capabilities */
51#define EHCI_USBCMD 0 /* command register */
52#define EHCI_USBCMD_RUN (1 << 0) /* RUN/STOP bit */
53#define EHCI_USBSTS 4 /* status register */
54#define EHCI_USBSTS_HALTED (1 << 12) /* HCHalted bit */
55#define EHCI_USBINTR 8 /* interrupt register */
56#define EHCI_CONFIGFLAG 0x40 /* configured flag register */
57#define EHCI_USBLEGSUP 0 /* legacy support register */
58#define EHCI_USBLEGSUP_BIOS (1 << 16) /* BIOS semaphore */
59#define EHCI_USBLEGSUP_OS (1 << 24) /* OS semaphore */
60#define EHCI_USBLEGCTLSTS 4 /* legacy control/status */
61#define EHCI_USBLEGCTLSTS_SOOE (1 << 13) /* SMI on ownership change */
62
63/* ASMEDIA quirk use */
64#define ASMT_DATA_WRITE0_REG 0xF8
65#define ASMT_DATA_WRITE1_REG 0xFC
66#define ASMT_CONTROL_REG 0xE0
67#define ASMT_CONTROL_WRITE_BIT 0x02
68#define ASMT_WRITEREG_CMD 0x10423
69#define ASMT_FLOWCTL_ADDR 0xFA30
70#define ASMT_FLOWCTL_DATA 0xBA
71#define ASMT_PSEUDO_DATA 0
72
73/* Intel quirk use */
74#define USB_INTEL_XUSB2PR 0xD0
75#define USB_INTEL_USB2PRM 0xD4
76#define USB_INTEL_USB3_PSSEN 0xD8
77#define USB_INTEL_USB3PRM 0xDC
78
79#ifdef CONFIG_USB_PCI_AMD
80/* AMD quirk use */
81#define AB_REG_BAR_LOW 0xe0
82#define AB_REG_BAR_HIGH 0xe1
83#define AB_REG_BAR_SB700 0xf0
84#define AB_INDX(addr) ((addr) + 0x00)
85#define AB_DATA(addr) ((addr) + 0x04)
86#define AX_INDXC 0x30
87#define AX_DATAC 0x34
88
89#define PT_ADDR_INDX 0xE8
90#define PT_READ_INDX 0xE4
91#define PT_SIG_1_ADDR 0xA520
92#define PT_SIG_2_ADDR 0xA521
93#define PT_SIG_3_ADDR 0xA522
94#define PT_SIG_4_ADDR 0xA523
95#define PT_SIG_1_DATA 0x78
96#define PT_SIG_2_DATA 0x56
97#define PT_SIG_3_DATA 0x34
98#define PT_SIG_4_DATA 0x12
99#define PT4_P1_REG 0xB521
100#define PT4_P2_REG 0xB522
101#define PT2_P1_REG 0xD520
102#define PT2_P2_REG 0xD521
103#define PT1_P1_REG 0xD522
104#define PT1_P2_REG 0xD523
105
106#define NB_PCIE_INDX_ADDR 0xe0
107#define NB_PCIE_INDX_DATA 0xe4
108#define PCIE_P_CNTL 0x10040
109#define BIF_NB 0x10002
110#define NB_PIF0_PWRDOWN_0 0x01100012
111#define NB_PIF0_PWRDOWN_1 0x01100013
112
113/*
114 * amd_chipset_gen values represent AMD different chipset generations
115 */
116enum amd_chipset_gen {
117 NOT_AMD_CHIPSET = 0,
118 AMD_CHIPSET_SB600,
119 AMD_CHIPSET_SB700,
120 AMD_CHIPSET_SB800,
121 AMD_CHIPSET_HUDSON2,
122 AMD_CHIPSET_BOLTON,
123 AMD_CHIPSET_YANGTZE,
124 AMD_CHIPSET_TAISHAN,
125 AMD_CHIPSET_UNKNOWN,
126};
127
128struct amd_chipset_type {
129 enum amd_chipset_gen gen;
130 u8 rev;
131};
132
133static struct amd_chipset_info {
134 struct pci_dev *nb_dev;
135 struct pci_dev *smbus_dev;
136 int nb_type;
137 struct amd_chipset_type sb_type;
138 int isoc_reqs;
139 int probe_count;
140 bool need_pll_quirk;
141} amd_chipset;
142
143static DEFINE_SPINLOCK(amd_lock);
144
145/*
146 * amd_chipset_sb_type_init - initialize amd chipset southbridge type
147 *
148 * AMD FCH/SB generation and revision is identified by SMBus controller
149 * vendor, device and revision IDs.
150 *
151 * Returns: 1 if it is an AMD chipset, 0 otherwise.
152 */
153static int amd_chipset_sb_type_init(struct amd_chipset_info *pinfo)
154{
155 u8 rev = 0;
156 pinfo->sb_type.gen = AMD_CHIPSET_UNKNOWN;
157
158 pinfo->smbus_dev = pci_get_device(PCI_VENDOR_ID_ATI,
159 PCI_DEVICE_ID_ATI_SBX00_SMBUS, NULL);
160 if (pinfo->smbus_dev) {
161 rev = pinfo->smbus_dev->revision;
162 if (rev >= 0x10 && rev <= 0x1f)
163 pinfo->sb_type.gen = AMD_CHIPSET_SB600;
164 else if (rev >= 0x30 && rev <= 0x3f)
165 pinfo->sb_type.gen = AMD_CHIPSET_SB700;
166 else if (rev >= 0x40 && rev <= 0x4f)
167 pinfo->sb_type.gen = AMD_CHIPSET_SB800;
168 } else {
169 pinfo->smbus_dev = pci_get_device(PCI_VENDOR_ID_AMD,
170 PCI_DEVICE_ID_AMD_HUDSON2_SMBUS, NULL);
171
172 if (pinfo->smbus_dev) {
173 rev = pinfo->smbus_dev->revision;
174 if (rev >= 0x11 && rev <= 0x14)
175 pinfo->sb_type.gen = AMD_CHIPSET_HUDSON2;
176 else if (rev >= 0x15 && rev <= 0x18)
177 pinfo->sb_type.gen = AMD_CHIPSET_BOLTON;
178 else if (rev >= 0x39 && rev <= 0x3a)
179 pinfo->sb_type.gen = AMD_CHIPSET_YANGTZE;
180 } else {
181 pinfo->smbus_dev = pci_get_device(PCI_VENDOR_ID_AMD,
182 0x145c, NULL);
183 if (pinfo->smbus_dev) {
184 rev = pinfo->smbus_dev->revision;
185 pinfo->sb_type.gen = AMD_CHIPSET_TAISHAN;
186 } else {
187 pinfo->sb_type.gen = NOT_AMD_CHIPSET;
188 return 0;
189 }
190 }
191 }
192 pinfo->sb_type.rev = rev;
193 return 1;
194}
195
196void sb800_prefetch(struct device *dev, int on)
197{
198 u16 misc;
199 struct pci_dev *pdev = to_pci_dev(dev);
200
201 pci_read_config_word(pdev, 0x50, &misc);
202 if (on == 0)
203 pci_write_config_word(pdev, 0x50, misc & 0xfcff);
204 else
205 pci_write_config_word(pdev, 0x50, misc | 0x0300);
206}
207EXPORT_SYMBOL_GPL(sb800_prefetch);
208
209static void usb_amd_find_chipset_info(void)
210{
211 unsigned long flags;
212 struct amd_chipset_info info = { };
213
214 spin_lock_irqsave(&amd_lock, flags);
215
216 /* probe only once */
217 if (amd_chipset.probe_count > 0) {
218 amd_chipset.probe_count++;
219 spin_unlock_irqrestore(&amd_lock, flags);
220 return;
221 }
222 spin_unlock_irqrestore(&amd_lock, flags);
223
224 if (!amd_chipset_sb_type_init(&info)) {
225 goto commit;
226 }
227
228 switch (info.sb_type.gen) {
229 case AMD_CHIPSET_SB700:
230 info.need_pll_quirk = info.sb_type.rev <= 0x3B;
231 break;
232 case AMD_CHIPSET_SB800:
233 case AMD_CHIPSET_HUDSON2:
234 case AMD_CHIPSET_BOLTON:
235 info.need_pll_quirk = true;
236 break;
237 default:
238 info.need_pll_quirk = false;
239 break;
240 }
241
242 if (!info.need_pll_quirk) {
243 if (info.smbus_dev) {
244 pci_dev_put(info.smbus_dev);
245 info.smbus_dev = NULL;
246 }
247 goto commit;
248 }
249
250 info.nb_dev = pci_get_device(PCI_VENDOR_ID_AMD, 0x9601, NULL);
251 if (info.nb_dev) {
252 info.nb_type = 1;
253 } else {
254 info.nb_dev = pci_get_device(PCI_VENDOR_ID_AMD, 0x1510, NULL);
255 if (info.nb_dev) {
256 info.nb_type = 2;
257 } else {
258 info.nb_dev = pci_get_device(PCI_VENDOR_ID_AMD,
259 0x9600, NULL);
260 if (info.nb_dev)
261 info.nb_type = 3;
262 }
263 }
264
265 printk(KERN_DEBUG "QUIRK: Enable AMD PLL fix\n");
266
267commit:
268
269 spin_lock_irqsave(&amd_lock, flags);
270 if (amd_chipset.probe_count > 0) {
271 /* race - someone else was faster - drop devices */
272
273 /* Mark that we where here */
274 amd_chipset.probe_count++;
275
276 spin_unlock_irqrestore(&amd_lock, flags);
277
278 pci_dev_put(info.nb_dev);
279 pci_dev_put(info.smbus_dev);
280
281 } else {
282 /* no race - commit the result */
283 info.probe_count++;
284 amd_chipset = info;
285 spin_unlock_irqrestore(&amd_lock, flags);
286 }
287}
288
289int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *pdev)
290{
291 /* Make sure amd chipset type has already been initialized */
292 usb_amd_find_chipset_info();
293 if (amd_chipset.sb_type.gen == AMD_CHIPSET_YANGTZE ||
294 amd_chipset.sb_type.gen == AMD_CHIPSET_TAISHAN) {
295 dev_dbg(&pdev->dev, "QUIRK: Enable AMD remote wakeup fix\n");
296 return 1;
297 }
298 return 0;
299}
300EXPORT_SYMBOL_GPL(usb_hcd_amd_remote_wakeup_quirk);
301
302bool usb_amd_hang_symptom_quirk(void)
303{
304 u8 rev;
305
306 usb_amd_find_chipset_info();
307 rev = amd_chipset.sb_type.rev;
308 /* SB600 and old version of SB700 have hang symptom bug */
309 return amd_chipset.sb_type.gen == AMD_CHIPSET_SB600 ||
310 (amd_chipset.sb_type.gen == AMD_CHIPSET_SB700 &&
311 rev >= 0x3a && rev <= 0x3b);
312}
313EXPORT_SYMBOL_GPL(usb_amd_hang_symptom_quirk);
314
315bool usb_amd_prefetch_quirk(void)
316{
317 usb_amd_find_chipset_info();
318 /* SB800 needs pre-fetch fix */
319 return amd_chipset.sb_type.gen == AMD_CHIPSET_SB800;
320}
321EXPORT_SYMBOL_GPL(usb_amd_prefetch_quirk);
322
323bool usb_amd_quirk_pll_check(void)
324{
325 usb_amd_find_chipset_info();
326 return amd_chipset.need_pll_quirk;
327}
328EXPORT_SYMBOL_GPL(usb_amd_quirk_pll_check);
329
330/*
331 * The hardware normally enables the A-link power management feature, which
332 * lets the system lower the power consumption in idle states.
333 *
334 * This USB quirk prevents the link going into that lower power state
335 * during isochronous transfers.
336 *
337 * Without this quirk, isochronous stream on OHCI/EHCI/xHCI controllers of
338 * some AMD platforms may stutter or have breaks occasionally.
339 */
340static void usb_amd_quirk_pll(int disable)
341{
342 u32 addr, addr_low, addr_high, val;
343 u32 bit = disable ? 0 : 1;
344 unsigned long flags;
345
346 spin_lock_irqsave(&amd_lock, flags);
347
348 if (disable) {
349 amd_chipset.isoc_reqs++;
350 if (amd_chipset.isoc_reqs > 1) {
351 spin_unlock_irqrestore(&amd_lock, flags);
352 return;
353 }
354 } else {
355 amd_chipset.isoc_reqs--;
356 if (amd_chipset.isoc_reqs > 0) {
357 spin_unlock_irqrestore(&amd_lock, flags);
358 return;
359 }
360 }
361
362 if (amd_chipset.sb_type.gen == AMD_CHIPSET_SB800 ||
363 amd_chipset.sb_type.gen == AMD_CHIPSET_HUDSON2 ||
364 amd_chipset.sb_type.gen == AMD_CHIPSET_BOLTON) {
365 outb_p(AB_REG_BAR_LOW, 0xcd6);
366 addr_low = inb_p(0xcd7);
367 outb_p(AB_REG_BAR_HIGH, 0xcd6);
368 addr_high = inb_p(0xcd7);
369 addr = addr_high << 8 | addr_low;
370
371 outl_p(0x30, AB_INDX(addr));
372 outl_p(0x40, AB_DATA(addr));
373 outl_p(0x34, AB_INDX(addr));
374 val = inl_p(AB_DATA(addr));
375 } else if (amd_chipset.sb_type.gen == AMD_CHIPSET_SB700 &&
376 amd_chipset.sb_type.rev <= 0x3b) {
377 pci_read_config_dword(amd_chipset.smbus_dev,
378 AB_REG_BAR_SB700, &addr);
379 outl(AX_INDXC, AB_INDX(addr));
380 outl(0x40, AB_DATA(addr));
381 outl(AX_DATAC, AB_INDX(addr));
382 val = inl(AB_DATA(addr));
383 } else {
384 spin_unlock_irqrestore(&amd_lock, flags);
385 return;
386 }
387
388 if (disable) {
389 val &= ~0x08;
390 val |= (1 << 4) | (1 << 9);
391 } else {
392 val |= 0x08;
393 val &= ~((1 << 4) | (1 << 9));
394 }
395 outl_p(val, AB_DATA(addr));
396
397 if (!amd_chipset.nb_dev) {
398 spin_unlock_irqrestore(&amd_lock, flags);
399 return;
400 }
401
402 if (amd_chipset.nb_type == 1 || amd_chipset.nb_type == 3) {
403 addr = PCIE_P_CNTL;
404 pci_write_config_dword(amd_chipset.nb_dev,
405 NB_PCIE_INDX_ADDR, addr);
406 pci_read_config_dword(amd_chipset.nb_dev,
407 NB_PCIE_INDX_DATA, &val);
408
409 val &= ~(1 | (1 << 3) | (1 << 4) | (1 << 9) | (1 << 12));
410 val |= bit | (bit << 3) | (bit << 12);
411 val |= ((!bit) << 4) | ((!bit) << 9);
412 pci_write_config_dword(amd_chipset.nb_dev,
413 NB_PCIE_INDX_DATA, val);
414
415 addr = BIF_NB;
416 pci_write_config_dword(amd_chipset.nb_dev,
417 NB_PCIE_INDX_ADDR, addr);
418 pci_read_config_dword(amd_chipset.nb_dev,
419 NB_PCIE_INDX_DATA, &val);
420 val &= ~(1 << 8);
421 val |= bit << 8;
422
423 pci_write_config_dword(amd_chipset.nb_dev,
424 NB_PCIE_INDX_DATA, val);
425 } else if (amd_chipset.nb_type == 2) {
426 addr = NB_PIF0_PWRDOWN_0;
427 pci_write_config_dword(amd_chipset.nb_dev,
428 NB_PCIE_INDX_ADDR, addr);
429 pci_read_config_dword(amd_chipset.nb_dev,
430 NB_PCIE_INDX_DATA, &val);
431 if (disable)
432 val &= ~(0x3f << 7);
433 else
434 val |= 0x3f << 7;
435
436 pci_write_config_dword(amd_chipset.nb_dev,
437 NB_PCIE_INDX_DATA, val);
438
439 addr = NB_PIF0_PWRDOWN_1;
440 pci_write_config_dword(amd_chipset.nb_dev,
441 NB_PCIE_INDX_ADDR, addr);
442 pci_read_config_dword(amd_chipset.nb_dev,
443 NB_PCIE_INDX_DATA, &val);
444 if (disable)
445 val &= ~(0x3f << 7);
446 else
447 val |= 0x3f << 7;
448
449 pci_write_config_dword(amd_chipset.nb_dev,
450 NB_PCIE_INDX_DATA, val);
451 }
452
453 spin_unlock_irqrestore(&amd_lock, flags);
454 return;
455}
456
457void usb_amd_quirk_pll_disable(void)
458{
459 usb_amd_quirk_pll(1);
460}
461EXPORT_SYMBOL_GPL(usb_amd_quirk_pll_disable);
462
463void usb_amd_quirk_pll_enable(void)
464{
465 usb_amd_quirk_pll(0);
466}
467EXPORT_SYMBOL_GPL(usb_amd_quirk_pll_enable);
468
469void usb_amd_dev_put(void)
470{
471 struct pci_dev *nb, *smbus;
472 unsigned long flags;
473
474 spin_lock_irqsave(&amd_lock, flags);
475
476 amd_chipset.probe_count--;
477 if (amd_chipset.probe_count > 0) {
478 spin_unlock_irqrestore(&amd_lock, flags);
479 return;
480 }
481
482 /* save them to pci_dev_put outside of spinlock */
483 nb = amd_chipset.nb_dev;
484 smbus = amd_chipset.smbus_dev;
485
486 amd_chipset.nb_dev = NULL;
487 amd_chipset.smbus_dev = NULL;
488 amd_chipset.nb_type = 0;
489 memset(&amd_chipset.sb_type, 0, sizeof(amd_chipset.sb_type));
490 amd_chipset.isoc_reqs = 0;
491 amd_chipset.need_pll_quirk = false;
492
493 spin_unlock_irqrestore(&amd_lock, flags);
494
495 pci_dev_put(nb);
496 pci_dev_put(smbus);
497}
498EXPORT_SYMBOL_GPL(usb_amd_dev_put);
499
500/*
501 * Check if port is disabled in BIOS on AMD Promontory host.
502 * BIOS Disabled ports may wake on connect/disconnect and need
503 * driver workaround to keep them disabled.
504 * Returns true if port is marked disabled.
505 */
506bool usb_amd_pt_check_port(struct device *device, int port)
507{
508 unsigned char value, port_shift;
509 struct pci_dev *pdev;
510 u16 reg;
511
512 pdev = to_pci_dev(device);
513 pci_write_config_word(pdev, PT_ADDR_INDX, PT_SIG_1_ADDR);
514
515 pci_read_config_byte(pdev, PT_READ_INDX, &value);
516 if (value != PT_SIG_1_DATA)
517 return false;
518
519 pci_write_config_word(pdev, PT_ADDR_INDX, PT_SIG_2_ADDR);
520
521 pci_read_config_byte(pdev, PT_READ_INDX, &value);
522 if (value != PT_SIG_2_DATA)
523 return false;
524
525 pci_write_config_word(pdev, PT_ADDR_INDX, PT_SIG_3_ADDR);
526
527 pci_read_config_byte(pdev, PT_READ_INDX, &value);
528 if (value != PT_SIG_3_DATA)
529 return false;
530
531 pci_write_config_word(pdev, PT_ADDR_INDX, PT_SIG_4_ADDR);
532
533 pci_read_config_byte(pdev, PT_READ_INDX, &value);
534 if (value != PT_SIG_4_DATA)
535 return false;
536
537 /* Check disabled port setting, if bit is set port is enabled */
538 switch (pdev->device) {
539 case 0x43b9:
540 case 0x43ba:
541 /*
542 * device is AMD_PROMONTORYA_4(0x43b9) or PROMONTORYA_3(0x43ba)
543 * PT4_P1_REG bits[7..1] represents USB2.0 ports 6 to 0
544 * PT4_P2_REG bits[6..0] represents ports 13 to 7
545 */
546 if (port > 6) {
547 reg = PT4_P2_REG;
548 port_shift = port - 7;
549 } else {
550 reg = PT4_P1_REG;
551 port_shift = port + 1;
552 }
553 break;
554 case 0x43bb:
555 /*
556 * device is AMD_PROMONTORYA_2(0x43bb)
557 * PT2_P1_REG bits[7..5] represents USB2.0 ports 2 to 0
558 * PT2_P2_REG bits[5..0] represents ports 9 to 3
559 */
560 if (port > 2) {
561 reg = PT2_P2_REG;
562 port_shift = port - 3;
563 } else {
564 reg = PT2_P1_REG;
565 port_shift = port + 5;
566 }
567 break;
568 case 0x43bc:
569 /*
570 * device is AMD_PROMONTORYA_1(0x43bc)
571 * PT1_P1_REG[7..4] represents USB2.0 ports 3 to 0
572 * PT1_P2_REG[5..0] represents ports 9 to 4
573 */
574 if (port > 3) {
575 reg = PT1_P2_REG;
576 port_shift = port - 4;
577 } else {
578 reg = PT1_P1_REG;
579 port_shift = port + 4;
580 }
581 break;
582 default:
583 return false;
584 }
585 pci_write_config_word(pdev, PT_ADDR_INDX, reg);
586 pci_read_config_byte(pdev, PT_READ_INDX, &value);
587
588 return !(value & BIT(port_shift));
589}
590EXPORT_SYMBOL_GPL(usb_amd_pt_check_port);
591#endif /* CONFIG_USB_PCI_AMD */
592
593static int usb_asmedia_wait_write(struct pci_dev *pdev)
594{
595 unsigned long retry_count;
596 unsigned char value;
597
598 for (retry_count = 1000; retry_count > 0; --retry_count) {
599
600 pci_read_config_byte(pdev, ASMT_CONTROL_REG, &value);
601
602 if (value == 0xff) {
603 dev_err(&pdev->dev, "%s: check_ready ERROR", __func__);
604 return -EIO;
605 }
606
607 if ((value & ASMT_CONTROL_WRITE_BIT) == 0)
608 return 0;
609
610 udelay(50);
611 }
612
613 dev_warn(&pdev->dev, "%s: check_write_ready timeout", __func__);
614 return -ETIMEDOUT;
615}
616
617void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev)
618{
619 if (usb_asmedia_wait_write(pdev) != 0)
620 return;
621
622 /* send command and address to device */
623 pci_write_config_dword(pdev, ASMT_DATA_WRITE0_REG, ASMT_WRITEREG_CMD);
624 pci_write_config_dword(pdev, ASMT_DATA_WRITE1_REG, ASMT_FLOWCTL_ADDR);
625 pci_write_config_byte(pdev, ASMT_CONTROL_REG, ASMT_CONTROL_WRITE_BIT);
626
627 if (usb_asmedia_wait_write(pdev) != 0)
628 return;
629
630 /* send data to device */
631 pci_write_config_dword(pdev, ASMT_DATA_WRITE0_REG, ASMT_FLOWCTL_DATA);
632 pci_write_config_dword(pdev, ASMT_DATA_WRITE1_REG, ASMT_PSEUDO_DATA);
633 pci_write_config_byte(pdev, ASMT_CONTROL_REG, ASMT_CONTROL_WRITE_BIT);
634}
635EXPORT_SYMBOL_GPL(usb_asmedia_modifyflowcontrol);
636
637static inline int io_type_enabled(struct pci_dev *pdev, unsigned int mask)
638{
639 u16 cmd;
640
641 return !pci_read_config_word(pdev, PCI_COMMAND, &cmd) && (cmd & mask);
642}
643
644#define mmio_enabled(dev) io_type_enabled(dev, PCI_COMMAND_MEMORY)
645
646#if defined(CONFIG_HAS_IOPORT) && IS_ENABLED(CONFIG_USB_UHCI_HCD)
647/*
648 * Make sure the controller is completely inactive, unable to
649 * generate interrupts or do DMA.
650 */
651void uhci_reset_hc(struct pci_dev *pdev, unsigned long base)
652{
653 /* Turn off PIRQ enable and SMI enable. (This also turns off the
654 * BIOS's USB Legacy Support.) Turn off all the R/WC bits too.
655 */
656 pci_write_config_word(pdev, UHCI_USBLEGSUP, UHCI_USBLEGSUP_RWC);
657
658 /* Reset the HC - this will force us to get a
659 * new notification of any already connected
660 * ports due to the virtual disconnect that it
661 * implies.
662 */
663 outw(UHCI_USBCMD_HCRESET, base + UHCI_USBCMD);
664 mb();
665 udelay(5);
666 if (inw(base + UHCI_USBCMD) & UHCI_USBCMD_HCRESET)
667 dev_warn(&pdev->dev, "HCRESET not completed yet!\n");
668
669 /* Just to be safe, disable interrupt requests and
670 * make sure the controller is stopped.
671 */
672 outw(0, base + UHCI_USBINTR);
673 outw(0, base + UHCI_USBCMD);
674}
675EXPORT_SYMBOL_GPL(uhci_reset_hc);
676
677/*
678 * Initialize a controller that was newly discovered or has just been
679 * resumed. In either case we can't be sure of its previous state.
680 *
681 * Returns: 1 if the controller was reset, 0 otherwise.
682 */
683int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base)
684{
685 u16 legsup;
686 unsigned int cmd, intr;
687
688 /*
689 * When restarting a suspended controller, we expect all the
690 * settings to be the same as we left them:
691 *
692 * PIRQ and SMI disabled, no R/W bits set in USBLEGSUP;
693 * Controller is stopped and configured with EGSM set;
694 * No interrupts enabled except possibly Resume Detect.
695 *
696 * If any of these conditions are violated we do a complete reset.
697 */
698 pci_read_config_word(pdev, UHCI_USBLEGSUP, &legsup);
699 if (legsup & ~(UHCI_USBLEGSUP_RO | UHCI_USBLEGSUP_RWC)) {
700 dev_dbg(&pdev->dev, "%s: legsup = 0x%04x\n",
701 __func__, legsup);
702 goto reset_needed;
703 }
704
705 cmd = inw(base + UHCI_USBCMD);
706 if ((cmd & UHCI_USBCMD_RUN) || !(cmd & UHCI_USBCMD_CONFIGURE) ||
707 !(cmd & UHCI_USBCMD_EGSM)) {
708 dev_dbg(&pdev->dev, "%s: cmd = 0x%04x\n",
709 __func__, cmd);
710 goto reset_needed;
711 }
712
713 intr = inw(base + UHCI_USBINTR);
714 if (intr & (~UHCI_USBINTR_RESUME)) {
715 dev_dbg(&pdev->dev, "%s: intr = 0x%04x\n",
716 __func__, intr);
717 goto reset_needed;
718 }
719 return 0;
720
721reset_needed:
722 dev_dbg(&pdev->dev, "Performing full reset\n");
723 uhci_reset_hc(pdev, base);
724 return 1;
725}
726EXPORT_SYMBOL_GPL(uhci_check_and_reset_hc);
727
728#define pio_enabled(dev) io_type_enabled(dev, PCI_COMMAND_IO)
729
730static void quirk_usb_handoff_uhci(struct pci_dev *pdev)
731{
732 unsigned long base = 0;
733 int i;
734
735 if (!pio_enabled(pdev))
736 return;
737
738 for (i = 0; i < PCI_STD_NUM_BARS; i++)
739 if ((pci_resource_flags(pdev, i) & IORESOURCE_IO)) {
740 base = pci_resource_start(pdev, i);
741 break;
742 }
743
744 if (base)
745 uhci_check_and_reset_hc(pdev, base);
746}
747
748#else /* defined(CONFIG_HAS_IOPORT && IS_ENABLED(CONFIG_USB_UHCI_HCD) */
749
750static void quirk_usb_handoff_uhci(struct pci_dev *pdev) {}
751
752#endif /* defined(CONFIG_HAS_IOPORT && IS_ENABLED(CONFIG_USB_UHCI_HCD) */
753
754static int mmio_resource_enabled(struct pci_dev *pdev, int idx)
755{
756 return pci_resource_start(pdev, idx) && mmio_enabled(pdev);
757}
758
759static void quirk_usb_handoff_ohci(struct pci_dev *pdev)
760{
761 void __iomem *base;
762 u32 control;
763 u32 fminterval = 0;
764 bool no_fminterval = false;
765 int cnt;
766
767 if (!mmio_resource_enabled(pdev, 0))
768 return;
769
770 base = pci_ioremap_bar(pdev, 0);
771 if (base == NULL)
772 return;
773
774 /*
775 * ULi M5237 OHCI controller locks the whole system when accessing
776 * the OHCI_FMINTERVAL offset.
777 */
778 if (pdev->vendor == PCI_VENDOR_ID_AL && pdev->device == 0x5237)
779 no_fminterval = true;
780
781 control = readl(base + OHCI_CONTROL);
782
783/* On PA-RISC, PDC can leave IR set incorrectly; ignore it there. */
784#ifdef __hppa__
785#define OHCI_CTRL_MASK (OHCI_CTRL_RWC | OHCI_CTRL_IR)
786#else
787#define OHCI_CTRL_MASK OHCI_CTRL_RWC
788
789 if (control & OHCI_CTRL_IR) {
790 int wait_time = 500; /* arbitrary; 5 seconds */
791 writel(OHCI_INTR_OC, base + OHCI_INTRENABLE);
792 writel(OHCI_OCR, base + OHCI_CMDSTATUS);
793 while (wait_time > 0 &&
794 readl(base + OHCI_CONTROL) & OHCI_CTRL_IR) {
795 wait_time -= 10;
796 msleep(10);
797 }
798 if (wait_time <= 0)
799 dev_warn(&pdev->dev,
800 "OHCI: BIOS handoff failed (BIOS bug?) %08x\n",
801 readl(base + OHCI_CONTROL));
802 }
803#endif
804
805 /* disable interrupts */
806 writel((u32) ~0, base + OHCI_INTRDISABLE);
807
808 /* Go into the USB_RESET state, preserving RWC (and possibly IR) */
809 writel(control & OHCI_CTRL_MASK, base + OHCI_CONTROL);
810 readl(base + OHCI_CONTROL);
811
812 /* software reset of the controller, preserving HcFmInterval */
813 if (!no_fminterval)
814 fminterval = readl(base + OHCI_FMINTERVAL);
815
816 writel(OHCI_HCR, base + OHCI_CMDSTATUS);
817
818 /* reset requires max 10 us delay */
819 for (cnt = 30; cnt > 0; --cnt) { /* ... allow extra time */
820 if ((readl(base + OHCI_CMDSTATUS) & OHCI_HCR) == 0)
821 break;
822 udelay(1);
823 }
824
825 if (!no_fminterval)
826 writel(fminterval, base + OHCI_FMINTERVAL);
827
828 /* Now the controller is safely in SUSPEND and nothing can wake it up */
829 iounmap(base);
830}
831
832static const struct dmi_system_id ehci_dmi_nohandoff_table[] = {
833 {
834 /* Pegatron Lucid (ExoPC) */
835 .matches = {
836 DMI_MATCH(DMI_BOARD_NAME, "EXOPG06411"),
837 DMI_MATCH(DMI_BIOS_VERSION, "Lucid-CE-133"),
838 },
839 },
840 {
841 /* Pegatron Lucid (Ordissimo AIRIS) */
842 .matches = {
843 DMI_MATCH(DMI_BOARD_NAME, "M11JB"),
844 DMI_MATCH(DMI_BIOS_VERSION, "Lucid-"),
845 },
846 },
847 {
848 /* Pegatron Lucid (Ordissimo) */
849 .matches = {
850 DMI_MATCH(DMI_BOARD_NAME, "Ordissimo"),
851 DMI_MATCH(DMI_BIOS_VERSION, "Lucid-"),
852 },
853 },
854 {
855 /* HASEE E200 */
856 .matches = {
857 DMI_MATCH(DMI_BOARD_VENDOR, "HASEE"),
858 DMI_MATCH(DMI_BOARD_NAME, "E210"),
859 DMI_MATCH(DMI_BIOS_VERSION, "6.00"),
860 },
861 },
862 { }
863};
864
865static void ehci_bios_handoff(struct pci_dev *pdev,
866 void __iomem *op_reg_base,
867 u32 cap, u8 offset)
868{
869 int try_handoff = 1, tried_handoff = 0;
870
871 /*
872 * The Pegatron Lucid tablet sporadically waits for 98 seconds trying
873 * the handoff on its unused controller. Skip it.
874 *
875 * The HASEE E200 hangs when the semaphore is set (bugzilla #77021).
876 */
877 if (pdev->vendor == 0x8086 && (pdev->device == 0x283a ||
878 pdev->device == 0x27cc)) {
879 if (dmi_check_system(ehci_dmi_nohandoff_table))
880 try_handoff = 0;
881 }
882
883 if (try_handoff && (cap & EHCI_USBLEGSUP_BIOS)) {
884 dev_dbg(&pdev->dev, "EHCI: BIOS handoff\n");
885
886#if 0
887/* aleksey_gorelov@phoenix.com reports that some systems need SMI forced on,
888 * but that seems dubious in general (the BIOS left it off intentionally)
889 * and is known to prevent some systems from booting. so we won't do this
890 * unless maybe we can determine when we're on a system that needs SMI forced.
891 */
892 /* BIOS workaround (?): be sure the pre-Linux code
893 * receives the SMI
894 */
895 pci_read_config_dword(pdev, offset + EHCI_USBLEGCTLSTS, &val);
896 pci_write_config_dword(pdev, offset + EHCI_USBLEGCTLSTS,
897 val | EHCI_USBLEGCTLSTS_SOOE);
898#endif
899
900 /* some systems get upset if this semaphore is
901 * set for any other reason than forcing a BIOS
902 * handoff..
903 */
904 pci_write_config_byte(pdev, offset + 3, 1);
905 }
906
907 /* if boot firmware now owns EHCI, spin till it hands it over. */
908 if (try_handoff) {
909 int msec = 1000;
910 while ((cap & EHCI_USBLEGSUP_BIOS) && (msec > 0)) {
911 tried_handoff = 1;
912 msleep(10);
913 msec -= 10;
914 pci_read_config_dword(pdev, offset, &cap);
915 }
916 }
917
918 if (cap & EHCI_USBLEGSUP_BIOS) {
919 /* well, possibly buggy BIOS... try to shut it down,
920 * and hope nothing goes too wrong
921 */
922 if (try_handoff)
923 dev_warn(&pdev->dev,
924 "EHCI: BIOS handoff failed (BIOS bug?) %08x\n",
925 cap);
926 pci_write_config_byte(pdev, offset + 2, 0);
927 }
928
929 /* just in case, always disable EHCI SMIs */
930 pci_write_config_dword(pdev, offset + EHCI_USBLEGCTLSTS, 0);
931
932 /* If the BIOS ever owned the controller then we can't expect
933 * any power sessions to remain intact.
934 */
935 if (tried_handoff)
936 writel(0, op_reg_base + EHCI_CONFIGFLAG);
937}
938
939static void quirk_usb_disable_ehci(struct pci_dev *pdev)
940{
941 void __iomem *base, *op_reg_base;
942 u32 hcc_params, cap, val;
943 u8 offset, cap_length;
944 int wait_time, count = 256/4;
945
946 if (!mmio_resource_enabled(pdev, 0))
947 return;
948
949 base = pci_ioremap_bar(pdev, 0);
950 if (base == NULL)
951 return;
952
953 cap_length = readb(base);
954 op_reg_base = base + cap_length;
955
956 /* EHCI 0.96 and later may have "extended capabilities"
957 * spec section 5.1 explains the bios handoff, e.g. for
958 * booting from USB disk or using a usb keyboard
959 */
960 hcc_params = readl(base + EHCI_HCC_PARAMS);
961 offset = (hcc_params >> 8) & 0xff;
962 while (offset && --count) {
963 pci_read_config_dword(pdev, offset, &cap);
964
965 switch (cap & 0xff) {
966 case 1:
967 ehci_bios_handoff(pdev, op_reg_base, cap, offset);
968 break;
969 case 0: /* Illegal reserved cap, set cap=0 so we exit */
970 cap = 0;
971 fallthrough;
972 default:
973 dev_warn(&pdev->dev,
974 "EHCI: unrecognized capability %02x\n",
975 cap & 0xff);
976 }
977 offset = (cap >> 8) & 0xff;
978 }
979 if (!count)
980 dev_printk(KERN_DEBUG, &pdev->dev, "EHCI: capability loop?\n");
981
982 /*
983 * halt EHCI & disable its interrupts in any case
984 */
985 val = readl(op_reg_base + EHCI_USBSTS);
986 if ((val & EHCI_USBSTS_HALTED) == 0) {
987 val = readl(op_reg_base + EHCI_USBCMD);
988 val &= ~EHCI_USBCMD_RUN;
989 writel(val, op_reg_base + EHCI_USBCMD);
990
991 wait_time = 2000;
992 do {
993 writel(0x3f, op_reg_base + EHCI_USBSTS);
994 udelay(100);
995 wait_time -= 100;
996 val = readl(op_reg_base + EHCI_USBSTS);
997 if ((val == ~(u32)0) || (val & EHCI_USBSTS_HALTED)) {
998 break;
999 }
1000 } while (wait_time > 0);
1001 }
1002 writel(0, op_reg_base + EHCI_USBINTR);
1003 writel(0x3f, op_reg_base + EHCI_USBSTS);
1004
1005 iounmap(base);
1006}
1007
1008/*
1009 * handshake - spin reading a register until handshake completes
1010 * @ptr: address of hc register to be read
1011 * @mask: bits to look at in result of read
1012 * @done: value of those bits when handshake succeeds
1013 * @wait_usec: timeout in microseconds
1014 * @delay_usec: delay in microseconds to wait between polling
1015 *
1016 * Polls a register every delay_usec microseconds.
1017 * Returns 0 when the mask bits have the value done.
1018 * Returns -ETIMEDOUT if this condition is not true after
1019 * wait_usec microseconds have passed.
1020 */
1021static int handshake(void __iomem *ptr, u32 mask, u32 done,
1022 int wait_usec, int delay_usec)
1023{
1024 u32 result;
1025
1026 return readl_poll_timeout_atomic(ptr, result,
1027 ((result & mask) == done),
1028 delay_usec, wait_usec);
1029}
1030
1031/*
1032 * Intel's Panther Point chipset has two host controllers (EHCI and xHCI) that
1033 * share some number of ports. These ports can be switched between either
1034 * controller. Not all of the ports under the EHCI host controller may be
1035 * switchable.
1036 *
1037 * The ports should be switched over to xHCI before PCI probes for any device
1038 * start. This avoids active devices under EHCI being disconnected during the
1039 * port switchover, which could cause loss of data on USB storage devices, or
1040 * failed boot when the root file system is on a USB mass storage device and is
1041 * enumerated under EHCI first.
1042 *
1043 * We write into the xHC's PCI configuration space in some Intel-specific
1044 * registers to switch the ports over. The USB 3.0 terminations and the USB
1045 * 2.0 data wires are switched separately. We want to enable the SuperSpeed
1046 * terminations before switching the USB 2.0 wires over, so that USB 3.0
1047 * devices connect at SuperSpeed, rather than at USB 2.0 speeds.
1048 */
1049void usb_enable_intel_xhci_ports(struct pci_dev *xhci_pdev)
1050{
1051 u32 ports_available;
1052 bool ehci_found = false;
1053 struct pci_dev *companion = NULL;
1054
1055 /* Sony VAIO t-series with subsystem device ID 90a8 is not capable of
1056 * switching ports from EHCI to xHCI
1057 */
1058 if (xhci_pdev->subsystem_vendor == PCI_VENDOR_ID_SONY &&
1059 xhci_pdev->subsystem_device == 0x90a8)
1060 return;
1061
1062 /* make sure an intel EHCI controller exists */
1063 for_each_pci_dev(companion) {
1064 if (companion->class == PCI_CLASS_SERIAL_USB_EHCI &&
1065 companion->vendor == PCI_VENDOR_ID_INTEL) {
1066 ehci_found = true;
1067 break;
1068 }
1069 }
1070
1071 if (!ehci_found)
1072 return;
1073
1074 /* Don't switchover the ports if the user hasn't compiled the xHCI
1075 * driver. Otherwise they will see "dead" USB ports that don't power
1076 * the devices.
1077 */
1078 if (!IS_ENABLED(CONFIG_USB_XHCI_HCD)) {
1079 dev_warn(&xhci_pdev->dev,
1080 "CONFIG_USB_XHCI_HCD is turned off, defaulting to EHCI.\n");
1081 dev_warn(&xhci_pdev->dev,
1082 "USB 3.0 devices will work at USB 2.0 speeds.\n");
1083 usb_disable_xhci_ports(xhci_pdev);
1084 return;
1085 }
1086
1087 /* Read USB3PRM, the USB 3.0 Port Routing Mask Register
1088 * Indicate the ports that can be changed from OS.
1089 */
1090 pci_read_config_dword(xhci_pdev, USB_INTEL_USB3PRM,
1091 &ports_available);
1092
1093 dev_dbg(&xhci_pdev->dev, "Configurable ports to enable SuperSpeed: 0x%x\n",
1094 ports_available);
1095
1096 /* Write USB3_PSSEN, the USB 3.0 Port SuperSpeed Enable
1097 * Register, to turn on SuperSpeed terminations for the
1098 * switchable ports.
1099 */
1100 pci_write_config_dword(xhci_pdev, USB_INTEL_USB3_PSSEN,
1101 ports_available);
1102
1103 pci_read_config_dword(xhci_pdev, USB_INTEL_USB3_PSSEN,
1104 &ports_available);
1105 dev_dbg(&xhci_pdev->dev,
1106 "USB 3.0 ports that are now enabled under xHCI: 0x%x\n",
1107 ports_available);
1108
1109 /* Read XUSB2PRM, xHCI USB 2.0 Port Routing Mask Register
1110 * Indicate the USB 2.0 ports to be controlled by the xHCI host.
1111 */
1112
1113 pci_read_config_dword(xhci_pdev, USB_INTEL_USB2PRM,
1114 &ports_available);
1115
1116 dev_dbg(&xhci_pdev->dev, "Configurable USB 2.0 ports to hand over to xCHI: 0x%x\n",
1117 ports_available);
1118
1119 /* Write XUSB2PR, the xHC USB 2.0 Port Routing Register, to
1120 * switch the USB 2.0 power and data lines over to the xHCI
1121 * host.
1122 */
1123 pci_write_config_dword(xhci_pdev, USB_INTEL_XUSB2PR,
1124 ports_available);
1125
1126 pci_read_config_dword(xhci_pdev, USB_INTEL_XUSB2PR,
1127 &ports_available);
1128 dev_dbg(&xhci_pdev->dev,
1129 "USB 2.0 ports that are now switched over to xHCI: 0x%x\n",
1130 ports_available);
1131}
1132EXPORT_SYMBOL_GPL(usb_enable_intel_xhci_ports);
1133
1134void usb_disable_xhci_ports(struct pci_dev *xhci_pdev)
1135{
1136 pci_write_config_dword(xhci_pdev, USB_INTEL_USB3_PSSEN, 0x0);
1137 pci_write_config_dword(xhci_pdev, USB_INTEL_XUSB2PR, 0x0);
1138}
1139EXPORT_SYMBOL_GPL(usb_disable_xhci_ports);
1140
1141/*
1142 * PCI Quirks for xHCI.
1143 *
1144 * Takes care of the handoff between the Pre-OS (i.e. BIOS) and the OS.
1145 * It signals to the BIOS that the OS wants control of the host controller,
1146 * and then waits 1 second for the BIOS to hand over control.
1147 * If we timeout, assume the BIOS is broken and take control anyway.
1148 */
1149static void quirk_usb_handoff_xhci(struct pci_dev *pdev)
1150{
1151 void __iomem *base;
1152 int ext_cap_offset;
1153 void __iomem *op_reg_base;
1154 u32 val;
1155 int timeout;
1156 int len = pci_resource_len(pdev, 0);
1157
1158 if (!mmio_resource_enabled(pdev, 0))
1159 return;
1160
1161 base = ioremap(pci_resource_start(pdev, 0), len);
1162 if (base == NULL)
1163 return;
1164
1165 /*
1166 * Find the Legacy Support Capability register -
1167 * this is optional for xHCI host controllers.
1168 */
1169 ext_cap_offset = xhci_find_next_ext_cap(base, 0, XHCI_EXT_CAPS_LEGACY);
1170
1171 if (!ext_cap_offset)
1172 goto hc_init;
1173
1174 if ((ext_cap_offset + sizeof(val)) > len) {
1175 /* We're reading garbage from the controller */
1176 dev_warn(&pdev->dev, "xHCI controller failing to respond");
1177 goto iounmap;
1178 }
1179 val = readl(base + ext_cap_offset);
1180
1181 /* Auto handoff never worked for these devices. Force it and continue */
1182 if ((pdev->vendor == PCI_VENDOR_ID_TI && pdev->device == 0x8241) ||
1183 (pdev->vendor == PCI_VENDOR_ID_RENESAS
1184 && pdev->device == 0x0014)) {
1185 val = (val | XHCI_HC_OS_OWNED) & ~XHCI_HC_BIOS_OWNED;
1186 writel(val, base + ext_cap_offset);
1187 }
1188
1189 /* If the BIOS owns the HC, signal that the OS wants it, and wait */
1190 if (val & XHCI_HC_BIOS_OWNED) {
1191 writel(val | XHCI_HC_OS_OWNED, base + ext_cap_offset);
1192
1193 /* Wait for 1 second with 10 microsecond polling interval */
1194 timeout = handshake(base + ext_cap_offset, XHCI_HC_BIOS_OWNED,
1195 0, 1000000, 10);
1196
1197 /* Assume a buggy BIOS and take HC ownership anyway */
1198 if (timeout) {
1199 dev_warn(&pdev->dev,
1200 "xHCI BIOS handoff failed (BIOS bug ?) %08x\n",
1201 val);
1202 writel(val & ~XHCI_HC_BIOS_OWNED, base + ext_cap_offset);
1203 }
1204 }
1205
1206 val = readl(base + ext_cap_offset + XHCI_LEGACY_CONTROL_OFFSET);
1207 /* Mask off (turn off) any enabled SMIs */
1208 val &= XHCI_LEGACY_DISABLE_SMI;
1209 /* Mask all SMI events bits, RW1C */
1210 val |= XHCI_LEGACY_SMI_EVENTS;
1211 /* Disable any BIOS SMIs and clear all SMI events*/
1212 writel(val, base + ext_cap_offset + XHCI_LEGACY_CONTROL_OFFSET);
1213
1214hc_init:
1215 if (pdev->vendor == PCI_VENDOR_ID_INTEL)
1216 usb_enable_intel_xhci_ports(pdev);
1217
1218 op_reg_base = base + XHCI_HC_LENGTH(readl(base));
1219
1220 /* Wait for the host controller to be ready before writing any
1221 * operational or runtime registers. Wait 5 seconds and no more.
1222 */
1223 timeout = handshake(op_reg_base + XHCI_STS_OFFSET, XHCI_STS_CNR, 0,
1224 5000000, 10);
1225 /* Assume a buggy HC and start HC initialization anyway */
1226 if (timeout) {
1227 val = readl(op_reg_base + XHCI_STS_OFFSET);
1228 dev_warn(&pdev->dev,
1229 "xHCI HW not ready after 5 sec (HC bug?) status = 0x%x\n",
1230 val);
1231 }
1232
1233 /* Send the halt and disable interrupts command */
1234 val = readl(op_reg_base + XHCI_CMD_OFFSET);
1235 val &= ~(XHCI_CMD_RUN | XHCI_IRQS);
1236 writel(val, op_reg_base + XHCI_CMD_OFFSET);
1237
1238 /* Wait for the HC to halt - poll every 125 usec (one microframe). */
1239 timeout = handshake(op_reg_base + XHCI_STS_OFFSET, XHCI_STS_HALT, 1,
1240 XHCI_MAX_HALT_USEC, 125);
1241 if (timeout) {
1242 val = readl(op_reg_base + XHCI_STS_OFFSET);
1243 dev_warn(&pdev->dev,
1244 "xHCI HW did not halt within %d usec status = 0x%x\n",
1245 XHCI_MAX_HALT_USEC, val);
1246 }
1247
1248iounmap:
1249 iounmap(base);
1250}
1251
1252static void quirk_usb_early_handoff(struct pci_dev *pdev)
1253{
1254 struct device_node *parent;
1255 bool is_rpi;
1256
1257 /* Skip Netlogic mips SoC's internal PCI USB controller.
1258 * This device does not need/support EHCI/OHCI handoff
1259 */
1260 if (pdev->vendor == 0x184e) /* vendor Netlogic */
1261 return;
1262
1263 /*
1264 * Bypass the Raspberry Pi 4 controller xHCI controller, things are
1265 * taken care of by the board's co-processor.
1266 */
1267 if (pdev->vendor == PCI_VENDOR_ID_VIA && pdev->device == 0x3483) {
1268 parent = of_get_parent(pdev->bus->dev.of_node);
1269 is_rpi = of_device_is_compatible(parent, "brcm,bcm2711-pcie");
1270 of_node_put(parent);
1271 if (is_rpi)
1272 return;
1273 }
1274
1275 if (pdev->class != PCI_CLASS_SERIAL_USB_UHCI &&
1276 pdev->class != PCI_CLASS_SERIAL_USB_OHCI &&
1277 pdev->class != PCI_CLASS_SERIAL_USB_EHCI &&
1278 pdev->class != PCI_CLASS_SERIAL_USB_XHCI)
1279 return;
1280
1281 if (pci_enable_device(pdev) < 0) {
1282 dev_warn(&pdev->dev,
1283 "Can't enable PCI device, BIOS handoff failed.\n");
1284 return;
1285 }
1286 if (pdev->class == PCI_CLASS_SERIAL_USB_UHCI)
1287 quirk_usb_handoff_uhci(pdev);
1288 else if (pdev->class == PCI_CLASS_SERIAL_USB_OHCI)
1289 quirk_usb_handoff_ohci(pdev);
1290 else if (pdev->class == PCI_CLASS_SERIAL_USB_EHCI)
1291 quirk_usb_disable_ehci(pdev);
1292 else if (pdev->class == PCI_CLASS_SERIAL_USB_XHCI)
1293 quirk_usb_handoff_xhci(pdev);
1294 pci_disable_device(pdev);
1295}
1296DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_ANY_ID, PCI_ANY_ID,
1297 PCI_CLASS_SERIAL_USB, 8, quirk_usb_early_handoff);
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * This file contains code to reset and initialize USB host controllers.
4 * Some of it includes work-arounds for PCI hardware and BIOS quirks.
5 * It may need to run early during booting -- before USB would normally
6 * initialize -- to ensure that Linux doesn't use any legacy modes.
7 *
8 * Copyright (c) 1999 Martin Mares <mj@ucw.cz>
9 * (and others)
10 */
11
12#include <linux/types.h>
13#include <linux/kernel.h>
14#include <linux/pci.h>
15#include <linux/delay.h>
16#include <linux/export.h>
17#include <linux/acpi.h>
18#include <linux/dmi.h>
19#include "pci-quirks.h"
20#include "xhci-ext-caps.h"
21
22
23#define UHCI_USBLEGSUP 0xc0 /* legacy support */
24#define UHCI_USBCMD 0 /* command register */
25#define UHCI_USBINTR 4 /* interrupt register */
26#define UHCI_USBLEGSUP_RWC 0x8f00 /* the R/WC bits */
27#define UHCI_USBLEGSUP_RO 0x5040 /* R/O and reserved bits */
28#define UHCI_USBCMD_RUN 0x0001 /* RUN/STOP bit */
29#define UHCI_USBCMD_HCRESET 0x0002 /* Host Controller reset */
30#define UHCI_USBCMD_EGSM 0x0008 /* Global Suspend Mode */
31#define UHCI_USBCMD_CONFIGURE 0x0040 /* Config Flag */
32#define UHCI_USBINTR_RESUME 0x0002 /* Resume interrupt enable */
33
34#define OHCI_CONTROL 0x04
35#define OHCI_CMDSTATUS 0x08
36#define OHCI_INTRSTATUS 0x0c
37#define OHCI_INTRENABLE 0x10
38#define OHCI_INTRDISABLE 0x14
39#define OHCI_FMINTERVAL 0x34
40#define OHCI_HCFS (3 << 6) /* hc functional state */
41#define OHCI_HCR (1 << 0) /* host controller reset */
42#define OHCI_OCR (1 << 3) /* ownership change request */
43#define OHCI_CTRL_RWC (1 << 9) /* remote wakeup connected */
44#define OHCI_CTRL_IR (1 << 8) /* interrupt routing */
45#define OHCI_INTR_OC (1 << 30) /* ownership change */
46
47#define EHCI_HCC_PARAMS 0x08 /* extended capabilities */
48#define EHCI_USBCMD 0 /* command register */
49#define EHCI_USBCMD_RUN (1 << 0) /* RUN/STOP bit */
50#define EHCI_USBSTS 4 /* status register */
51#define EHCI_USBSTS_HALTED (1 << 12) /* HCHalted bit */
52#define EHCI_USBINTR 8 /* interrupt register */
53#define EHCI_CONFIGFLAG 0x40 /* configured flag register */
54#define EHCI_USBLEGSUP 0 /* legacy support register */
55#define EHCI_USBLEGSUP_BIOS (1 << 16) /* BIOS semaphore */
56#define EHCI_USBLEGSUP_OS (1 << 24) /* OS semaphore */
57#define EHCI_USBLEGCTLSTS 4 /* legacy control/status */
58#define EHCI_USBLEGCTLSTS_SOOE (1 << 13) /* SMI on ownership change */
59
60/* AMD quirk use */
61#define AB_REG_BAR_LOW 0xe0
62#define AB_REG_BAR_HIGH 0xe1
63#define AB_REG_BAR_SB700 0xf0
64#define AB_INDX(addr) ((addr) + 0x00)
65#define AB_DATA(addr) ((addr) + 0x04)
66#define AX_INDXC 0x30
67#define AX_DATAC 0x34
68
69#define PT_ADDR_INDX 0xE8
70#define PT_READ_INDX 0xE4
71#define PT_SIG_1_ADDR 0xA520
72#define PT_SIG_2_ADDR 0xA521
73#define PT_SIG_3_ADDR 0xA522
74#define PT_SIG_4_ADDR 0xA523
75#define PT_SIG_1_DATA 0x78
76#define PT_SIG_2_DATA 0x56
77#define PT_SIG_3_DATA 0x34
78#define PT_SIG_4_DATA 0x12
79#define PT4_P1_REG 0xB521
80#define PT4_P2_REG 0xB522
81#define PT2_P1_REG 0xD520
82#define PT2_P2_REG 0xD521
83#define PT1_P1_REG 0xD522
84#define PT1_P2_REG 0xD523
85
86#define NB_PCIE_INDX_ADDR 0xe0
87#define NB_PCIE_INDX_DATA 0xe4
88#define PCIE_P_CNTL 0x10040
89#define BIF_NB 0x10002
90#define NB_PIF0_PWRDOWN_0 0x01100012
91#define NB_PIF0_PWRDOWN_1 0x01100013
92
93#define USB_INTEL_XUSB2PR 0xD0
94#define USB_INTEL_USB2PRM 0xD4
95#define USB_INTEL_USB3_PSSEN 0xD8
96#define USB_INTEL_USB3PRM 0xDC
97
98/* ASMEDIA quirk use */
99#define ASMT_DATA_WRITE0_REG 0xF8
100#define ASMT_DATA_WRITE1_REG 0xFC
101#define ASMT_CONTROL_REG 0xE0
102#define ASMT_CONTROL_WRITE_BIT 0x02
103#define ASMT_WRITEREG_CMD 0x10423
104#define ASMT_FLOWCTL_ADDR 0xFA30
105#define ASMT_FLOWCTL_DATA 0xBA
106#define ASMT_PSEUDO_DATA 0
107
108/*
109 * amd_chipset_gen values represent AMD different chipset generations
110 */
111enum amd_chipset_gen {
112 NOT_AMD_CHIPSET = 0,
113 AMD_CHIPSET_SB600,
114 AMD_CHIPSET_SB700,
115 AMD_CHIPSET_SB800,
116 AMD_CHIPSET_HUDSON2,
117 AMD_CHIPSET_BOLTON,
118 AMD_CHIPSET_YANGTZE,
119 AMD_CHIPSET_TAISHAN,
120 AMD_CHIPSET_UNKNOWN,
121};
122
123struct amd_chipset_type {
124 enum amd_chipset_gen gen;
125 u8 rev;
126};
127
128static struct amd_chipset_info {
129 struct pci_dev *nb_dev;
130 struct pci_dev *smbus_dev;
131 int nb_type;
132 struct amd_chipset_type sb_type;
133 int isoc_reqs;
134 int probe_count;
135 int probe_result;
136} amd_chipset;
137
138static DEFINE_SPINLOCK(amd_lock);
139
140/*
141 * amd_chipset_sb_type_init - initialize amd chipset southbridge type
142 *
143 * AMD FCH/SB generation and revision is identified by SMBus controller
144 * vendor, device and revision IDs.
145 *
146 * Returns: 1 if it is an AMD chipset, 0 otherwise.
147 */
148static int amd_chipset_sb_type_init(struct amd_chipset_info *pinfo)
149{
150 u8 rev = 0;
151 pinfo->sb_type.gen = AMD_CHIPSET_UNKNOWN;
152
153 pinfo->smbus_dev = pci_get_device(PCI_VENDOR_ID_ATI,
154 PCI_DEVICE_ID_ATI_SBX00_SMBUS, NULL);
155 if (pinfo->smbus_dev) {
156 rev = pinfo->smbus_dev->revision;
157 if (rev >= 0x10 && rev <= 0x1f)
158 pinfo->sb_type.gen = AMD_CHIPSET_SB600;
159 else if (rev >= 0x30 && rev <= 0x3f)
160 pinfo->sb_type.gen = AMD_CHIPSET_SB700;
161 else if (rev >= 0x40 && rev <= 0x4f)
162 pinfo->sb_type.gen = AMD_CHIPSET_SB800;
163 } else {
164 pinfo->smbus_dev = pci_get_device(PCI_VENDOR_ID_AMD,
165 PCI_DEVICE_ID_AMD_HUDSON2_SMBUS, NULL);
166
167 if (pinfo->smbus_dev) {
168 rev = pinfo->smbus_dev->revision;
169 if (rev >= 0x11 && rev <= 0x14)
170 pinfo->sb_type.gen = AMD_CHIPSET_HUDSON2;
171 else if (rev >= 0x15 && rev <= 0x18)
172 pinfo->sb_type.gen = AMD_CHIPSET_BOLTON;
173 else if (rev >= 0x39 && rev <= 0x3a)
174 pinfo->sb_type.gen = AMD_CHIPSET_YANGTZE;
175 } else {
176 pinfo->smbus_dev = pci_get_device(PCI_VENDOR_ID_AMD,
177 0x145c, NULL);
178 if (pinfo->smbus_dev) {
179 rev = pinfo->smbus_dev->revision;
180 pinfo->sb_type.gen = AMD_CHIPSET_TAISHAN;
181 } else {
182 pinfo->sb_type.gen = NOT_AMD_CHIPSET;
183 return 0;
184 }
185 }
186 }
187 pinfo->sb_type.rev = rev;
188 return 1;
189}
190
191void sb800_prefetch(struct device *dev, int on)
192{
193 u16 misc;
194 struct pci_dev *pdev = to_pci_dev(dev);
195
196 pci_read_config_word(pdev, 0x50, &misc);
197 if (on == 0)
198 pci_write_config_word(pdev, 0x50, misc & 0xfcff);
199 else
200 pci_write_config_word(pdev, 0x50, misc | 0x0300);
201}
202EXPORT_SYMBOL_GPL(sb800_prefetch);
203
204int usb_amd_find_chipset_info(void)
205{
206 unsigned long flags;
207 struct amd_chipset_info info;
208 int ret;
209
210 spin_lock_irqsave(&amd_lock, flags);
211
212 /* probe only once */
213 if (amd_chipset.probe_count > 0) {
214 amd_chipset.probe_count++;
215 spin_unlock_irqrestore(&amd_lock, flags);
216 return amd_chipset.probe_result;
217 }
218 memset(&info, 0, sizeof(info));
219 spin_unlock_irqrestore(&amd_lock, flags);
220
221 if (!amd_chipset_sb_type_init(&info)) {
222 ret = 0;
223 goto commit;
224 }
225
226 /* Below chipset generations needn't enable AMD PLL quirk */
227 if (info.sb_type.gen == AMD_CHIPSET_UNKNOWN ||
228 info.sb_type.gen == AMD_CHIPSET_SB600 ||
229 info.sb_type.gen == AMD_CHIPSET_YANGTZE ||
230 (info.sb_type.gen == AMD_CHIPSET_SB700 &&
231 info.sb_type.rev > 0x3b)) {
232 if (info.smbus_dev) {
233 pci_dev_put(info.smbus_dev);
234 info.smbus_dev = NULL;
235 }
236 ret = 0;
237 goto commit;
238 }
239
240 info.nb_dev = pci_get_device(PCI_VENDOR_ID_AMD, 0x9601, NULL);
241 if (info.nb_dev) {
242 info.nb_type = 1;
243 } else {
244 info.nb_dev = pci_get_device(PCI_VENDOR_ID_AMD, 0x1510, NULL);
245 if (info.nb_dev) {
246 info.nb_type = 2;
247 } else {
248 info.nb_dev = pci_get_device(PCI_VENDOR_ID_AMD,
249 0x9600, NULL);
250 if (info.nb_dev)
251 info.nb_type = 3;
252 }
253 }
254
255 ret = info.probe_result = 1;
256 printk(KERN_DEBUG "QUIRK: Enable AMD PLL fix\n");
257
258commit:
259
260 spin_lock_irqsave(&amd_lock, flags);
261 if (amd_chipset.probe_count > 0) {
262 /* race - someone else was faster - drop devices */
263
264 /* Mark that we where here */
265 amd_chipset.probe_count++;
266 ret = amd_chipset.probe_result;
267
268 spin_unlock_irqrestore(&amd_lock, flags);
269
270 pci_dev_put(info.nb_dev);
271 pci_dev_put(info.smbus_dev);
272
273 } else {
274 /* no race - commit the result */
275 info.probe_count++;
276 amd_chipset = info;
277 spin_unlock_irqrestore(&amd_lock, flags);
278 }
279
280 return ret;
281}
282EXPORT_SYMBOL_GPL(usb_amd_find_chipset_info);
283
284int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *pdev)
285{
286 /* Make sure amd chipset type has already been initialized */
287 usb_amd_find_chipset_info();
288 if (amd_chipset.sb_type.gen == AMD_CHIPSET_YANGTZE ||
289 amd_chipset.sb_type.gen == AMD_CHIPSET_TAISHAN) {
290 dev_dbg(&pdev->dev, "QUIRK: Enable AMD remote wakeup fix\n");
291 return 1;
292 }
293 return 0;
294}
295EXPORT_SYMBOL_GPL(usb_hcd_amd_remote_wakeup_quirk);
296
297bool usb_amd_hang_symptom_quirk(void)
298{
299 u8 rev;
300
301 usb_amd_find_chipset_info();
302 rev = amd_chipset.sb_type.rev;
303 /* SB600 and old version of SB700 have hang symptom bug */
304 return amd_chipset.sb_type.gen == AMD_CHIPSET_SB600 ||
305 (amd_chipset.sb_type.gen == AMD_CHIPSET_SB700 &&
306 rev >= 0x3a && rev <= 0x3b);
307}
308EXPORT_SYMBOL_GPL(usb_amd_hang_symptom_quirk);
309
310bool usb_amd_prefetch_quirk(void)
311{
312 usb_amd_find_chipset_info();
313 /* SB800 needs pre-fetch fix */
314 return amd_chipset.sb_type.gen == AMD_CHIPSET_SB800;
315}
316EXPORT_SYMBOL_GPL(usb_amd_prefetch_quirk);
317
318/*
319 * The hardware normally enables the A-link power management feature, which
320 * lets the system lower the power consumption in idle states.
321 *
322 * This USB quirk prevents the link going into that lower power state
323 * during isochronous transfers.
324 *
325 * Without this quirk, isochronous stream on OHCI/EHCI/xHCI controllers of
326 * some AMD platforms may stutter or have breaks occasionally.
327 */
328static void usb_amd_quirk_pll(int disable)
329{
330 u32 addr, addr_low, addr_high, val;
331 u32 bit = disable ? 0 : 1;
332 unsigned long flags;
333
334 spin_lock_irqsave(&amd_lock, flags);
335
336 if (disable) {
337 amd_chipset.isoc_reqs++;
338 if (amd_chipset.isoc_reqs > 1) {
339 spin_unlock_irqrestore(&amd_lock, flags);
340 return;
341 }
342 } else {
343 amd_chipset.isoc_reqs--;
344 if (amd_chipset.isoc_reqs > 0) {
345 spin_unlock_irqrestore(&amd_lock, flags);
346 return;
347 }
348 }
349
350 if (amd_chipset.sb_type.gen == AMD_CHIPSET_SB800 ||
351 amd_chipset.sb_type.gen == AMD_CHIPSET_HUDSON2 ||
352 amd_chipset.sb_type.gen == AMD_CHIPSET_BOLTON) {
353 outb_p(AB_REG_BAR_LOW, 0xcd6);
354 addr_low = inb_p(0xcd7);
355 outb_p(AB_REG_BAR_HIGH, 0xcd6);
356 addr_high = inb_p(0xcd7);
357 addr = addr_high << 8 | addr_low;
358
359 outl_p(0x30, AB_INDX(addr));
360 outl_p(0x40, AB_DATA(addr));
361 outl_p(0x34, AB_INDX(addr));
362 val = inl_p(AB_DATA(addr));
363 } else if (amd_chipset.sb_type.gen == AMD_CHIPSET_SB700 &&
364 amd_chipset.sb_type.rev <= 0x3b) {
365 pci_read_config_dword(amd_chipset.smbus_dev,
366 AB_REG_BAR_SB700, &addr);
367 outl(AX_INDXC, AB_INDX(addr));
368 outl(0x40, AB_DATA(addr));
369 outl(AX_DATAC, AB_INDX(addr));
370 val = inl(AB_DATA(addr));
371 } else {
372 spin_unlock_irqrestore(&amd_lock, flags);
373 return;
374 }
375
376 if (disable) {
377 val &= ~0x08;
378 val |= (1 << 4) | (1 << 9);
379 } else {
380 val |= 0x08;
381 val &= ~((1 << 4) | (1 << 9));
382 }
383 outl_p(val, AB_DATA(addr));
384
385 if (!amd_chipset.nb_dev) {
386 spin_unlock_irqrestore(&amd_lock, flags);
387 return;
388 }
389
390 if (amd_chipset.nb_type == 1 || amd_chipset.nb_type == 3) {
391 addr = PCIE_P_CNTL;
392 pci_write_config_dword(amd_chipset.nb_dev,
393 NB_PCIE_INDX_ADDR, addr);
394 pci_read_config_dword(amd_chipset.nb_dev,
395 NB_PCIE_INDX_DATA, &val);
396
397 val &= ~(1 | (1 << 3) | (1 << 4) | (1 << 9) | (1 << 12));
398 val |= bit | (bit << 3) | (bit << 12);
399 val |= ((!bit) << 4) | ((!bit) << 9);
400 pci_write_config_dword(amd_chipset.nb_dev,
401 NB_PCIE_INDX_DATA, val);
402
403 addr = BIF_NB;
404 pci_write_config_dword(amd_chipset.nb_dev,
405 NB_PCIE_INDX_ADDR, addr);
406 pci_read_config_dword(amd_chipset.nb_dev,
407 NB_PCIE_INDX_DATA, &val);
408 val &= ~(1 << 8);
409 val |= bit << 8;
410
411 pci_write_config_dword(amd_chipset.nb_dev,
412 NB_PCIE_INDX_DATA, val);
413 } else if (amd_chipset.nb_type == 2) {
414 addr = NB_PIF0_PWRDOWN_0;
415 pci_write_config_dword(amd_chipset.nb_dev,
416 NB_PCIE_INDX_ADDR, addr);
417 pci_read_config_dword(amd_chipset.nb_dev,
418 NB_PCIE_INDX_DATA, &val);
419 if (disable)
420 val &= ~(0x3f << 7);
421 else
422 val |= 0x3f << 7;
423
424 pci_write_config_dword(amd_chipset.nb_dev,
425 NB_PCIE_INDX_DATA, val);
426
427 addr = NB_PIF0_PWRDOWN_1;
428 pci_write_config_dword(amd_chipset.nb_dev,
429 NB_PCIE_INDX_ADDR, addr);
430 pci_read_config_dword(amd_chipset.nb_dev,
431 NB_PCIE_INDX_DATA, &val);
432 if (disable)
433 val &= ~(0x3f << 7);
434 else
435 val |= 0x3f << 7;
436
437 pci_write_config_dword(amd_chipset.nb_dev,
438 NB_PCIE_INDX_DATA, val);
439 }
440
441 spin_unlock_irqrestore(&amd_lock, flags);
442 return;
443}
444
445void usb_amd_quirk_pll_disable(void)
446{
447 usb_amd_quirk_pll(1);
448}
449EXPORT_SYMBOL_GPL(usb_amd_quirk_pll_disable);
450
451static int usb_asmedia_wait_write(struct pci_dev *pdev)
452{
453 unsigned long retry_count;
454 unsigned char value;
455
456 for (retry_count = 1000; retry_count > 0; --retry_count) {
457
458 pci_read_config_byte(pdev, ASMT_CONTROL_REG, &value);
459
460 if (value == 0xff) {
461 dev_err(&pdev->dev, "%s: check_ready ERROR", __func__);
462 return -EIO;
463 }
464
465 if ((value & ASMT_CONTROL_WRITE_BIT) == 0)
466 return 0;
467
468 udelay(50);
469 }
470
471 dev_warn(&pdev->dev, "%s: check_write_ready timeout", __func__);
472 return -ETIMEDOUT;
473}
474
475void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev)
476{
477 if (usb_asmedia_wait_write(pdev) != 0)
478 return;
479
480 /* send command and address to device */
481 pci_write_config_dword(pdev, ASMT_DATA_WRITE0_REG, ASMT_WRITEREG_CMD);
482 pci_write_config_dword(pdev, ASMT_DATA_WRITE1_REG, ASMT_FLOWCTL_ADDR);
483 pci_write_config_byte(pdev, ASMT_CONTROL_REG, ASMT_CONTROL_WRITE_BIT);
484
485 if (usb_asmedia_wait_write(pdev) != 0)
486 return;
487
488 /* send data to device */
489 pci_write_config_dword(pdev, ASMT_DATA_WRITE0_REG, ASMT_FLOWCTL_DATA);
490 pci_write_config_dword(pdev, ASMT_DATA_WRITE1_REG, ASMT_PSEUDO_DATA);
491 pci_write_config_byte(pdev, ASMT_CONTROL_REG, ASMT_CONTROL_WRITE_BIT);
492}
493EXPORT_SYMBOL_GPL(usb_asmedia_modifyflowcontrol);
494
495void usb_amd_quirk_pll_enable(void)
496{
497 usb_amd_quirk_pll(0);
498}
499EXPORT_SYMBOL_GPL(usb_amd_quirk_pll_enable);
500
501void usb_amd_dev_put(void)
502{
503 struct pci_dev *nb, *smbus;
504 unsigned long flags;
505
506 spin_lock_irqsave(&amd_lock, flags);
507
508 amd_chipset.probe_count--;
509 if (amd_chipset.probe_count > 0) {
510 spin_unlock_irqrestore(&amd_lock, flags);
511 return;
512 }
513
514 /* save them to pci_dev_put outside of spinlock */
515 nb = amd_chipset.nb_dev;
516 smbus = amd_chipset.smbus_dev;
517
518 amd_chipset.nb_dev = NULL;
519 amd_chipset.smbus_dev = NULL;
520 amd_chipset.nb_type = 0;
521 memset(&amd_chipset.sb_type, 0, sizeof(amd_chipset.sb_type));
522 amd_chipset.isoc_reqs = 0;
523 amd_chipset.probe_result = 0;
524
525 spin_unlock_irqrestore(&amd_lock, flags);
526
527 pci_dev_put(nb);
528 pci_dev_put(smbus);
529}
530EXPORT_SYMBOL_GPL(usb_amd_dev_put);
531
532/*
533 * Check if port is disabled in BIOS on AMD Promontory host.
534 * BIOS Disabled ports may wake on connect/disconnect and need
535 * driver workaround to keep them disabled.
536 * Returns true if port is marked disabled.
537 */
538bool usb_amd_pt_check_port(struct device *device, int port)
539{
540 unsigned char value, port_shift;
541 struct pci_dev *pdev;
542 u16 reg;
543
544 pdev = to_pci_dev(device);
545 pci_write_config_word(pdev, PT_ADDR_INDX, PT_SIG_1_ADDR);
546
547 pci_read_config_byte(pdev, PT_READ_INDX, &value);
548 if (value != PT_SIG_1_DATA)
549 return false;
550
551 pci_write_config_word(pdev, PT_ADDR_INDX, PT_SIG_2_ADDR);
552
553 pci_read_config_byte(pdev, PT_READ_INDX, &value);
554 if (value != PT_SIG_2_DATA)
555 return false;
556
557 pci_write_config_word(pdev, PT_ADDR_INDX, PT_SIG_3_ADDR);
558
559 pci_read_config_byte(pdev, PT_READ_INDX, &value);
560 if (value != PT_SIG_3_DATA)
561 return false;
562
563 pci_write_config_word(pdev, PT_ADDR_INDX, PT_SIG_4_ADDR);
564
565 pci_read_config_byte(pdev, PT_READ_INDX, &value);
566 if (value != PT_SIG_4_DATA)
567 return false;
568
569 /* Check disabled port setting, if bit is set port is enabled */
570 switch (pdev->device) {
571 case 0x43b9:
572 case 0x43ba:
573 /*
574 * device is AMD_PROMONTORYA_4(0x43b9) or PROMONTORYA_3(0x43ba)
575 * PT4_P1_REG bits[7..1] represents USB2.0 ports 6 to 0
576 * PT4_P2_REG bits[6..0] represents ports 13 to 7
577 */
578 if (port > 6) {
579 reg = PT4_P2_REG;
580 port_shift = port - 7;
581 } else {
582 reg = PT4_P1_REG;
583 port_shift = port + 1;
584 }
585 break;
586 case 0x43bb:
587 /*
588 * device is AMD_PROMONTORYA_2(0x43bb)
589 * PT2_P1_REG bits[7..5] represents USB2.0 ports 2 to 0
590 * PT2_P2_REG bits[5..0] represents ports 9 to 3
591 */
592 if (port > 2) {
593 reg = PT2_P2_REG;
594 port_shift = port - 3;
595 } else {
596 reg = PT2_P1_REG;
597 port_shift = port + 5;
598 }
599 break;
600 case 0x43bc:
601 /*
602 * device is AMD_PROMONTORYA_1(0x43bc)
603 * PT1_P1_REG[7..4] represents USB2.0 ports 3 to 0
604 * PT1_P2_REG[5..0] represents ports 9 to 4
605 */
606 if (port > 3) {
607 reg = PT1_P2_REG;
608 port_shift = port - 4;
609 } else {
610 reg = PT1_P1_REG;
611 port_shift = port + 4;
612 }
613 break;
614 default:
615 return false;
616 }
617 pci_write_config_word(pdev, PT_ADDR_INDX, reg);
618 pci_read_config_byte(pdev, PT_READ_INDX, &value);
619
620 return !(value & BIT(port_shift));
621}
622EXPORT_SYMBOL_GPL(usb_amd_pt_check_port);
623
624/*
625 * Make sure the controller is completely inactive, unable to
626 * generate interrupts or do DMA.
627 */
628void uhci_reset_hc(struct pci_dev *pdev, unsigned long base)
629{
630 /* Turn off PIRQ enable and SMI enable. (This also turns off the
631 * BIOS's USB Legacy Support.) Turn off all the R/WC bits too.
632 */
633 pci_write_config_word(pdev, UHCI_USBLEGSUP, UHCI_USBLEGSUP_RWC);
634
635 /* Reset the HC - this will force us to get a
636 * new notification of any already connected
637 * ports due to the virtual disconnect that it
638 * implies.
639 */
640 outw(UHCI_USBCMD_HCRESET, base + UHCI_USBCMD);
641 mb();
642 udelay(5);
643 if (inw(base + UHCI_USBCMD) & UHCI_USBCMD_HCRESET)
644 dev_warn(&pdev->dev, "HCRESET not completed yet!\n");
645
646 /* Just to be safe, disable interrupt requests and
647 * make sure the controller is stopped.
648 */
649 outw(0, base + UHCI_USBINTR);
650 outw(0, base + UHCI_USBCMD);
651}
652EXPORT_SYMBOL_GPL(uhci_reset_hc);
653
654/*
655 * Initialize a controller that was newly discovered or has just been
656 * resumed. In either case we can't be sure of its previous state.
657 *
658 * Returns: 1 if the controller was reset, 0 otherwise.
659 */
660int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base)
661{
662 u16 legsup;
663 unsigned int cmd, intr;
664
665 /*
666 * When restarting a suspended controller, we expect all the
667 * settings to be the same as we left them:
668 *
669 * PIRQ and SMI disabled, no R/W bits set in USBLEGSUP;
670 * Controller is stopped and configured with EGSM set;
671 * No interrupts enabled except possibly Resume Detect.
672 *
673 * If any of these conditions are violated we do a complete reset.
674 */
675 pci_read_config_word(pdev, UHCI_USBLEGSUP, &legsup);
676 if (legsup & ~(UHCI_USBLEGSUP_RO | UHCI_USBLEGSUP_RWC)) {
677 dev_dbg(&pdev->dev, "%s: legsup = 0x%04x\n",
678 __func__, legsup);
679 goto reset_needed;
680 }
681
682 cmd = inw(base + UHCI_USBCMD);
683 if ((cmd & UHCI_USBCMD_RUN) || !(cmd & UHCI_USBCMD_CONFIGURE) ||
684 !(cmd & UHCI_USBCMD_EGSM)) {
685 dev_dbg(&pdev->dev, "%s: cmd = 0x%04x\n",
686 __func__, cmd);
687 goto reset_needed;
688 }
689
690 intr = inw(base + UHCI_USBINTR);
691 if (intr & (~UHCI_USBINTR_RESUME)) {
692 dev_dbg(&pdev->dev, "%s: intr = 0x%04x\n",
693 __func__, intr);
694 goto reset_needed;
695 }
696 return 0;
697
698reset_needed:
699 dev_dbg(&pdev->dev, "Performing full reset\n");
700 uhci_reset_hc(pdev, base);
701 return 1;
702}
703EXPORT_SYMBOL_GPL(uhci_check_and_reset_hc);
704
705static inline int io_type_enabled(struct pci_dev *pdev, unsigned int mask)
706{
707 u16 cmd;
708 return !pci_read_config_word(pdev, PCI_COMMAND, &cmd) && (cmd & mask);
709}
710
711#define pio_enabled(dev) io_type_enabled(dev, PCI_COMMAND_IO)
712#define mmio_enabled(dev) io_type_enabled(dev, PCI_COMMAND_MEMORY)
713
714static void quirk_usb_handoff_uhci(struct pci_dev *pdev)
715{
716 unsigned long base = 0;
717 int i;
718
719 if (!pio_enabled(pdev))
720 return;
721
722 for (i = 0; i < PCI_ROM_RESOURCE; i++)
723 if ((pci_resource_flags(pdev, i) & IORESOURCE_IO)) {
724 base = pci_resource_start(pdev, i);
725 break;
726 }
727
728 if (base)
729 uhci_check_and_reset_hc(pdev, base);
730}
731
732static int mmio_resource_enabled(struct pci_dev *pdev, int idx)
733{
734 return pci_resource_start(pdev, idx) && mmio_enabled(pdev);
735}
736
737static void quirk_usb_handoff_ohci(struct pci_dev *pdev)
738{
739 void __iomem *base;
740 u32 control;
741 u32 fminterval = 0;
742 bool no_fminterval = false;
743 int cnt;
744
745 if (!mmio_resource_enabled(pdev, 0))
746 return;
747
748 base = pci_ioremap_bar(pdev, 0);
749 if (base == NULL)
750 return;
751
752 /*
753 * ULi M5237 OHCI controller locks the whole system when accessing
754 * the OHCI_FMINTERVAL offset.
755 */
756 if (pdev->vendor == PCI_VENDOR_ID_AL && pdev->device == 0x5237)
757 no_fminterval = true;
758
759 control = readl(base + OHCI_CONTROL);
760
761/* On PA-RISC, PDC can leave IR set incorrectly; ignore it there. */
762#ifdef __hppa__
763#define OHCI_CTRL_MASK (OHCI_CTRL_RWC | OHCI_CTRL_IR)
764#else
765#define OHCI_CTRL_MASK OHCI_CTRL_RWC
766
767 if (control & OHCI_CTRL_IR) {
768 int wait_time = 500; /* arbitrary; 5 seconds */
769 writel(OHCI_INTR_OC, base + OHCI_INTRENABLE);
770 writel(OHCI_OCR, base + OHCI_CMDSTATUS);
771 while (wait_time > 0 &&
772 readl(base + OHCI_CONTROL) & OHCI_CTRL_IR) {
773 wait_time -= 10;
774 msleep(10);
775 }
776 if (wait_time <= 0)
777 dev_warn(&pdev->dev,
778 "OHCI: BIOS handoff failed (BIOS bug?) %08x\n",
779 readl(base + OHCI_CONTROL));
780 }
781#endif
782
783 /* disable interrupts */
784 writel((u32) ~0, base + OHCI_INTRDISABLE);
785
786 /* Reset the USB bus, if the controller isn't already in RESET */
787 if (control & OHCI_HCFS) {
788 /* Go into RESET, preserving RWC (and possibly IR) */
789 writel(control & OHCI_CTRL_MASK, base + OHCI_CONTROL);
790 readl(base + OHCI_CONTROL);
791
792 /* drive bus reset for at least 50 ms (7.1.7.5) */
793 msleep(50);
794 }
795
796 /* software reset of the controller, preserving HcFmInterval */
797 if (!no_fminterval)
798 fminterval = readl(base + OHCI_FMINTERVAL);
799
800 writel(OHCI_HCR, base + OHCI_CMDSTATUS);
801
802 /* reset requires max 10 us delay */
803 for (cnt = 30; cnt > 0; --cnt) { /* ... allow extra time */
804 if ((readl(base + OHCI_CMDSTATUS) & OHCI_HCR) == 0)
805 break;
806 udelay(1);
807 }
808
809 if (!no_fminterval)
810 writel(fminterval, base + OHCI_FMINTERVAL);
811
812 /* Now the controller is safely in SUSPEND and nothing can wake it up */
813 iounmap(base);
814}
815
816static const struct dmi_system_id ehci_dmi_nohandoff_table[] = {
817 {
818 /* Pegatron Lucid (ExoPC) */
819 .matches = {
820 DMI_MATCH(DMI_BOARD_NAME, "EXOPG06411"),
821 DMI_MATCH(DMI_BIOS_VERSION, "Lucid-CE-133"),
822 },
823 },
824 {
825 /* Pegatron Lucid (Ordissimo AIRIS) */
826 .matches = {
827 DMI_MATCH(DMI_BOARD_NAME, "M11JB"),
828 DMI_MATCH(DMI_BIOS_VERSION, "Lucid-"),
829 },
830 },
831 {
832 /* Pegatron Lucid (Ordissimo) */
833 .matches = {
834 DMI_MATCH(DMI_BOARD_NAME, "Ordissimo"),
835 DMI_MATCH(DMI_BIOS_VERSION, "Lucid-"),
836 },
837 },
838 {
839 /* HASEE E200 */
840 .matches = {
841 DMI_MATCH(DMI_BOARD_VENDOR, "HASEE"),
842 DMI_MATCH(DMI_BOARD_NAME, "E210"),
843 DMI_MATCH(DMI_BIOS_VERSION, "6.00"),
844 },
845 },
846 { }
847};
848
849static void ehci_bios_handoff(struct pci_dev *pdev,
850 void __iomem *op_reg_base,
851 u32 cap, u8 offset)
852{
853 int try_handoff = 1, tried_handoff = 0;
854
855 /*
856 * The Pegatron Lucid tablet sporadically waits for 98 seconds trying
857 * the handoff on its unused controller. Skip it.
858 *
859 * The HASEE E200 hangs when the semaphore is set (bugzilla #77021).
860 */
861 if (pdev->vendor == 0x8086 && (pdev->device == 0x283a ||
862 pdev->device == 0x27cc)) {
863 if (dmi_check_system(ehci_dmi_nohandoff_table))
864 try_handoff = 0;
865 }
866
867 if (try_handoff && (cap & EHCI_USBLEGSUP_BIOS)) {
868 dev_dbg(&pdev->dev, "EHCI: BIOS handoff\n");
869
870#if 0
871/* aleksey_gorelov@phoenix.com reports that some systems need SMI forced on,
872 * but that seems dubious in general (the BIOS left it off intentionally)
873 * and is known to prevent some systems from booting. so we won't do this
874 * unless maybe we can determine when we're on a system that needs SMI forced.
875 */
876 /* BIOS workaround (?): be sure the pre-Linux code
877 * receives the SMI
878 */
879 pci_read_config_dword(pdev, offset + EHCI_USBLEGCTLSTS, &val);
880 pci_write_config_dword(pdev, offset + EHCI_USBLEGCTLSTS,
881 val | EHCI_USBLEGCTLSTS_SOOE);
882#endif
883
884 /* some systems get upset if this semaphore is
885 * set for any other reason than forcing a BIOS
886 * handoff..
887 */
888 pci_write_config_byte(pdev, offset + 3, 1);
889 }
890
891 /* if boot firmware now owns EHCI, spin till it hands it over. */
892 if (try_handoff) {
893 int msec = 1000;
894 while ((cap & EHCI_USBLEGSUP_BIOS) && (msec > 0)) {
895 tried_handoff = 1;
896 msleep(10);
897 msec -= 10;
898 pci_read_config_dword(pdev, offset, &cap);
899 }
900 }
901
902 if (cap & EHCI_USBLEGSUP_BIOS) {
903 /* well, possibly buggy BIOS... try to shut it down,
904 * and hope nothing goes too wrong
905 */
906 if (try_handoff)
907 dev_warn(&pdev->dev,
908 "EHCI: BIOS handoff failed (BIOS bug?) %08x\n",
909 cap);
910 pci_write_config_byte(pdev, offset + 2, 0);
911 }
912
913 /* just in case, always disable EHCI SMIs */
914 pci_write_config_dword(pdev, offset + EHCI_USBLEGCTLSTS, 0);
915
916 /* If the BIOS ever owned the controller then we can't expect
917 * any power sessions to remain intact.
918 */
919 if (tried_handoff)
920 writel(0, op_reg_base + EHCI_CONFIGFLAG);
921}
922
923static void quirk_usb_disable_ehci(struct pci_dev *pdev)
924{
925 void __iomem *base, *op_reg_base;
926 u32 hcc_params, cap, val;
927 u8 offset, cap_length;
928 int wait_time, count = 256/4;
929
930 if (!mmio_resource_enabled(pdev, 0))
931 return;
932
933 base = pci_ioremap_bar(pdev, 0);
934 if (base == NULL)
935 return;
936
937 cap_length = readb(base);
938 op_reg_base = base + cap_length;
939
940 /* EHCI 0.96 and later may have "extended capabilities"
941 * spec section 5.1 explains the bios handoff, e.g. for
942 * booting from USB disk or using a usb keyboard
943 */
944 hcc_params = readl(base + EHCI_HCC_PARAMS);
945 offset = (hcc_params >> 8) & 0xff;
946 while (offset && --count) {
947 pci_read_config_dword(pdev, offset, &cap);
948
949 switch (cap & 0xff) {
950 case 1:
951 ehci_bios_handoff(pdev, op_reg_base, cap, offset);
952 break;
953 case 0: /* Illegal reserved cap, set cap=0 so we exit */
954 cap = 0; /* fall through */
955 default:
956 dev_warn(&pdev->dev,
957 "EHCI: unrecognized capability %02x\n",
958 cap & 0xff);
959 }
960 offset = (cap >> 8) & 0xff;
961 }
962 if (!count)
963 dev_printk(KERN_DEBUG, &pdev->dev, "EHCI: capability loop?\n");
964
965 /*
966 * halt EHCI & disable its interrupts in any case
967 */
968 val = readl(op_reg_base + EHCI_USBSTS);
969 if ((val & EHCI_USBSTS_HALTED) == 0) {
970 val = readl(op_reg_base + EHCI_USBCMD);
971 val &= ~EHCI_USBCMD_RUN;
972 writel(val, op_reg_base + EHCI_USBCMD);
973
974 wait_time = 2000;
975 do {
976 writel(0x3f, op_reg_base + EHCI_USBSTS);
977 udelay(100);
978 wait_time -= 100;
979 val = readl(op_reg_base + EHCI_USBSTS);
980 if ((val == ~(u32)0) || (val & EHCI_USBSTS_HALTED)) {
981 break;
982 }
983 } while (wait_time > 0);
984 }
985 writel(0, op_reg_base + EHCI_USBINTR);
986 writel(0x3f, op_reg_base + EHCI_USBSTS);
987
988 iounmap(base);
989}
990
991/*
992 * handshake - spin reading a register until handshake completes
993 * @ptr: address of hc register to be read
994 * @mask: bits to look at in result of read
995 * @done: value of those bits when handshake succeeds
996 * @wait_usec: timeout in microseconds
997 * @delay_usec: delay in microseconds to wait between polling
998 *
999 * Polls a register every delay_usec microseconds.
1000 * Returns 0 when the mask bits have the value done.
1001 * Returns -ETIMEDOUT if this condition is not true after
1002 * wait_usec microseconds have passed.
1003 */
1004static int handshake(void __iomem *ptr, u32 mask, u32 done,
1005 int wait_usec, int delay_usec)
1006{
1007 u32 result;
1008
1009 do {
1010 result = readl(ptr);
1011 result &= mask;
1012 if (result == done)
1013 return 0;
1014 udelay(delay_usec);
1015 wait_usec -= delay_usec;
1016 } while (wait_usec > 0);
1017 return -ETIMEDOUT;
1018}
1019
1020/*
1021 * Intel's Panther Point chipset has two host controllers (EHCI and xHCI) that
1022 * share some number of ports. These ports can be switched between either
1023 * controller. Not all of the ports under the EHCI host controller may be
1024 * switchable.
1025 *
1026 * The ports should be switched over to xHCI before PCI probes for any device
1027 * start. This avoids active devices under EHCI being disconnected during the
1028 * port switchover, which could cause loss of data on USB storage devices, or
1029 * failed boot when the root file system is on a USB mass storage device and is
1030 * enumerated under EHCI first.
1031 *
1032 * We write into the xHC's PCI configuration space in some Intel-specific
1033 * registers to switch the ports over. The USB 3.0 terminations and the USB
1034 * 2.0 data wires are switched separately. We want to enable the SuperSpeed
1035 * terminations before switching the USB 2.0 wires over, so that USB 3.0
1036 * devices connect at SuperSpeed, rather than at USB 2.0 speeds.
1037 */
1038void usb_enable_intel_xhci_ports(struct pci_dev *xhci_pdev)
1039{
1040 u32 ports_available;
1041 bool ehci_found = false;
1042 struct pci_dev *companion = NULL;
1043
1044 /* Sony VAIO t-series with subsystem device ID 90a8 is not capable of
1045 * switching ports from EHCI to xHCI
1046 */
1047 if (xhci_pdev->subsystem_vendor == PCI_VENDOR_ID_SONY &&
1048 xhci_pdev->subsystem_device == 0x90a8)
1049 return;
1050
1051 /* make sure an intel EHCI controller exists */
1052 for_each_pci_dev(companion) {
1053 if (companion->class == PCI_CLASS_SERIAL_USB_EHCI &&
1054 companion->vendor == PCI_VENDOR_ID_INTEL) {
1055 ehci_found = true;
1056 break;
1057 }
1058 }
1059
1060 if (!ehci_found)
1061 return;
1062
1063 /* Don't switchover the ports if the user hasn't compiled the xHCI
1064 * driver. Otherwise they will see "dead" USB ports that don't power
1065 * the devices.
1066 */
1067 if (!IS_ENABLED(CONFIG_USB_XHCI_HCD)) {
1068 dev_warn(&xhci_pdev->dev,
1069 "CONFIG_USB_XHCI_HCD is turned off, defaulting to EHCI.\n");
1070 dev_warn(&xhci_pdev->dev,
1071 "USB 3.0 devices will work at USB 2.0 speeds.\n");
1072 usb_disable_xhci_ports(xhci_pdev);
1073 return;
1074 }
1075
1076 /* Read USB3PRM, the USB 3.0 Port Routing Mask Register
1077 * Indicate the ports that can be changed from OS.
1078 */
1079 pci_read_config_dword(xhci_pdev, USB_INTEL_USB3PRM,
1080 &ports_available);
1081
1082 dev_dbg(&xhci_pdev->dev, "Configurable ports to enable SuperSpeed: 0x%x\n",
1083 ports_available);
1084
1085 /* Write USB3_PSSEN, the USB 3.0 Port SuperSpeed Enable
1086 * Register, to turn on SuperSpeed terminations for the
1087 * switchable ports.
1088 */
1089 pci_write_config_dword(xhci_pdev, USB_INTEL_USB3_PSSEN,
1090 ports_available);
1091
1092 pci_read_config_dword(xhci_pdev, USB_INTEL_USB3_PSSEN,
1093 &ports_available);
1094 dev_dbg(&xhci_pdev->dev,
1095 "USB 3.0 ports that are now enabled under xHCI: 0x%x\n",
1096 ports_available);
1097
1098 /* Read XUSB2PRM, xHCI USB 2.0 Port Routing Mask Register
1099 * Indicate the USB 2.0 ports to be controlled by the xHCI host.
1100 */
1101
1102 pci_read_config_dword(xhci_pdev, USB_INTEL_USB2PRM,
1103 &ports_available);
1104
1105 dev_dbg(&xhci_pdev->dev, "Configurable USB 2.0 ports to hand over to xCHI: 0x%x\n",
1106 ports_available);
1107
1108 /* Write XUSB2PR, the xHC USB 2.0 Port Routing Register, to
1109 * switch the USB 2.0 power and data lines over to the xHCI
1110 * host.
1111 */
1112 pci_write_config_dword(xhci_pdev, USB_INTEL_XUSB2PR,
1113 ports_available);
1114
1115 pci_read_config_dword(xhci_pdev, USB_INTEL_XUSB2PR,
1116 &ports_available);
1117 dev_dbg(&xhci_pdev->dev,
1118 "USB 2.0 ports that are now switched over to xHCI: 0x%x\n",
1119 ports_available);
1120}
1121EXPORT_SYMBOL_GPL(usb_enable_intel_xhci_ports);
1122
1123void usb_disable_xhci_ports(struct pci_dev *xhci_pdev)
1124{
1125 pci_write_config_dword(xhci_pdev, USB_INTEL_USB3_PSSEN, 0x0);
1126 pci_write_config_dword(xhci_pdev, USB_INTEL_XUSB2PR, 0x0);
1127}
1128EXPORT_SYMBOL_GPL(usb_disable_xhci_ports);
1129
1130/**
1131 * PCI Quirks for xHCI.
1132 *
1133 * Takes care of the handoff between the Pre-OS (i.e. BIOS) and the OS.
1134 * It signals to the BIOS that the OS wants control of the host controller,
1135 * and then waits 1 second for the BIOS to hand over control.
1136 * If we timeout, assume the BIOS is broken and take control anyway.
1137 */
1138static void quirk_usb_handoff_xhci(struct pci_dev *pdev)
1139{
1140 void __iomem *base;
1141 int ext_cap_offset;
1142 void __iomem *op_reg_base;
1143 u32 val;
1144 int timeout;
1145 int len = pci_resource_len(pdev, 0);
1146
1147 if (!mmio_resource_enabled(pdev, 0))
1148 return;
1149
1150 base = ioremap_nocache(pci_resource_start(pdev, 0), len);
1151 if (base == NULL)
1152 return;
1153
1154 /*
1155 * Find the Legacy Support Capability register -
1156 * this is optional for xHCI host controllers.
1157 */
1158 ext_cap_offset = xhci_find_next_ext_cap(base, 0, XHCI_EXT_CAPS_LEGACY);
1159
1160 if (!ext_cap_offset)
1161 goto hc_init;
1162
1163 if ((ext_cap_offset + sizeof(val)) > len) {
1164 /* We're reading garbage from the controller */
1165 dev_warn(&pdev->dev, "xHCI controller failing to respond");
1166 goto iounmap;
1167 }
1168 val = readl(base + ext_cap_offset);
1169
1170 /* Auto handoff never worked for these devices. Force it and continue */
1171 if ((pdev->vendor == PCI_VENDOR_ID_TI && pdev->device == 0x8241) ||
1172 (pdev->vendor == PCI_VENDOR_ID_RENESAS
1173 && pdev->device == 0x0014)) {
1174 val = (val | XHCI_HC_OS_OWNED) & ~XHCI_HC_BIOS_OWNED;
1175 writel(val, base + ext_cap_offset);
1176 }
1177
1178 /* If the BIOS owns the HC, signal that the OS wants it, and wait */
1179 if (val & XHCI_HC_BIOS_OWNED) {
1180 writel(val | XHCI_HC_OS_OWNED, base + ext_cap_offset);
1181
1182 /* Wait for 1 second with 10 microsecond polling interval */
1183 timeout = handshake(base + ext_cap_offset, XHCI_HC_BIOS_OWNED,
1184 0, 1000000, 10);
1185
1186 /* Assume a buggy BIOS and take HC ownership anyway */
1187 if (timeout) {
1188 dev_warn(&pdev->dev,
1189 "xHCI BIOS handoff failed (BIOS bug ?) %08x\n",
1190 val);
1191 writel(val & ~XHCI_HC_BIOS_OWNED, base + ext_cap_offset);
1192 }
1193 }
1194
1195 val = readl(base + ext_cap_offset + XHCI_LEGACY_CONTROL_OFFSET);
1196 /* Mask off (turn off) any enabled SMIs */
1197 val &= XHCI_LEGACY_DISABLE_SMI;
1198 /* Mask all SMI events bits, RW1C */
1199 val |= XHCI_LEGACY_SMI_EVENTS;
1200 /* Disable any BIOS SMIs and clear all SMI events*/
1201 writel(val, base + ext_cap_offset + XHCI_LEGACY_CONTROL_OFFSET);
1202
1203hc_init:
1204 if (pdev->vendor == PCI_VENDOR_ID_INTEL)
1205 usb_enable_intel_xhci_ports(pdev);
1206
1207 op_reg_base = base + XHCI_HC_LENGTH(readl(base));
1208
1209 /* Wait for the host controller to be ready before writing any
1210 * operational or runtime registers. Wait 5 seconds and no more.
1211 */
1212 timeout = handshake(op_reg_base + XHCI_STS_OFFSET, XHCI_STS_CNR, 0,
1213 5000000, 10);
1214 /* Assume a buggy HC and start HC initialization anyway */
1215 if (timeout) {
1216 val = readl(op_reg_base + XHCI_STS_OFFSET);
1217 dev_warn(&pdev->dev,
1218 "xHCI HW not ready after 5 sec (HC bug?) status = 0x%x\n",
1219 val);
1220 }
1221
1222 /* Send the halt and disable interrupts command */
1223 val = readl(op_reg_base + XHCI_CMD_OFFSET);
1224 val &= ~(XHCI_CMD_RUN | XHCI_IRQS);
1225 writel(val, op_reg_base + XHCI_CMD_OFFSET);
1226
1227 /* Wait for the HC to halt - poll every 125 usec (one microframe). */
1228 timeout = handshake(op_reg_base + XHCI_STS_OFFSET, XHCI_STS_HALT, 1,
1229 XHCI_MAX_HALT_USEC, 125);
1230 if (timeout) {
1231 val = readl(op_reg_base + XHCI_STS_OFFSET);
1232 dev_warn(&pdev->dev,
1233 "xHCI HW did not halt within %d usec status = 0x%x\n",
1234 XHCI_MAX_HALT_USEC, val);
1235 }
1236
1237iounmap:
1238 iounmap(base);
1239}
1240
1241static void quirk_usb_early_handoff(struct pci_dev *pdev)
1242{
1243 /* Skip Netlogic mips SoC's internal PCI USB controller.
1244 * This device does not need/support EHCI/OHCI handoff
1245 */
1246 if (pdev->vendor == 0x184e) /* vendor Netlogic */
1247 return;
1248 if (pdev->class != PCI_CLASS_SERIAL_USB_UHCI &&
1249 pdev->class != PCI_CLASS_SERIAL_USB_OHCI &&
1250 pdev->class != PCI_CLASS_SERIAL_USB_EHCI &&
1251 pdev->class != PCI_CLASS_SERIAL_USB_XHCI)
1252 return;
1253
1254 if (pci_enable_device(pdev) < 0) {
1255 dev_warn(&pdev->dev,
1256 "Can't enable PCI device, BIOS handoff failed.\n");
1257 return;
1258 }
1259 if (pdev->class == PCI_CLASS_SERIAL_USB_UHCI)
1260 quirk_usb_handoff_uhci(pdev);
1261 else if (pdev->class == PCI_CLASS_SERIAL_USB_OHCI)
1262 quirk_usb_handoff_ohci(pdev);
1263 else if (pdev->class == PCI_CLASS_SERIAL_USB_EHCI)
1264 quirk_usb_disable_ehci(pdev);
1265 else if (pdev->class == PCI_CLASS_SERIAL_USB_XHCI)
1266 quirk_usb_handoff_xhci(pdev);
1267 pci_disable_device(pdev);
1268}
1269DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_ANY_ID, PCI_ANY_ID,
1270 PCI_CLASS_SERIAL_USB, 8, quirk_usb_early_handoff);
1271
1272bool usb_xhci_needs_pci_reset(struct pci_dev *pdev)
1273{
1274 /*
1275 * Our dear uPD72020{1,2} friend only partially resets when
1276 * asked to via the XHCI interface, and may end up doing DMA
1277 * at the wrong addresses, as it keeps the top 32bit of some
1278 * addresses from its previous programming under obscure
1279 * circumstances.
1280 * Give it a good wack at probe time. Unfortunately, this
1281 * needs to happen before we've had a chance to discover any
1282 * quirk, or the system will be in a rather bad state.
1283 */
1284 if (pdev->vendor == PCI_VENDOR_ID_RENESAS &&
1285 (pdev->device == 0x0014 || pdev->device == 0x0015))
1286 return true;
1287
1288 return false;
1289}
1290EXPORT_SYMBOL_GPL(usb_xhci_needs_pci_reset);