Loading...
1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * ehci-omap.c - driver for USBHOST on OMAP3/4 processors
4 *
5 * Bus Glue for the EHCI controllers in OMAP3/4
6 * Tested on several OMAP3 boards, and OMAP4 Pandaboard
7 *
8 * Copyright (C) 2007-2013 Texas Instruments, Inc.
9 * Author: Vikram Pandita <vikram.pandita@ti.com>
10 * Author: Anand Gadiyar <gadiyar@ti.com>
11 * Author: Keshava Munegowda <keshava_mgowda@ti.com>
12 * Author: Roger Quadros <rogerq@ti.com>
13 *
14 * Copyright (C) 2009 Nokia Corporation
15 * Contact: Felipe Balbi <felipe.balbi@nokia.com>
16 *
17 * Based on "ehci-fsl.c" and "ehci-au1xxx.c" ehci glue layers
18 */
19
20#include <linux/kernel.h>
21#include <linux/module.h>
22#include <linux/io.h>
23#include <linux/platform_device.h>
24#include <linux/slab.h>
25#include <linux/usb/ulpi.h>
26#include <linux/pm_runtime.h>
27#include <linux/clk.h>
28#include <linux/usb.h>
29#include <linux/usb/hcd.h>
30#include <linux/of.h>
31#include <linux/dma-mapping.h>
32
33#include "ehci.h"
34
35#include <linux/platform_data/usb-omap.h>
36
37/* EHCI Register Set */
38#define EHCI_INSNREG04 (0xA0)
39#define EHCI_INSNREG04_DISABLE_UNSUSPEND (1 << 5)
40#define EHCI_INSNREG05_ULPI (0xA4)
41#define EHCI_INSNREG05_ULPI_CONTROL_SHIFT 31
42#define EHCI_INSNREG05_ULPI_PORTSEL_SHIFT 24
43#define EHCI_INSNREG05_ULPI_OPSEL_SHIFT 22
44#define EHCI_INSNREG05_ULPI_REGADD_SHIFT 16
45#define EHCI_INSNREG05_ULPI_EXTREGADD_SHIFT 8
46#define EHCI_INSNREG05_ULPI_WRDATA_SHIFT 0
47
48#define DRIVER_DESC "OMAP-EHCI Host Controller driver"
49
50static const char hcd_name[] = "ehci-omap";
51
52/*-------------------------------------------------------------------------*/
53
54struct omap_hcd {
55 struct usb_phy *phy[OMAP3_HS_USB_PORTS]; /* one PHY for each port */
56 int nports;
57};
58
59static inline void ehci_write(void __iomem *base, u32 reg, u32 val)
60{
61 __raw_writel(val, base + reg);
62}
63
64/* configure so an HC device and id are always provided */
65/* always called with process context; sleeping is OK */
66
67static struct hc_driver __read_mostly ehci_omap_hc_driver;
68
69static const struct ehci_driver_overrides ehci_omap_overrides __initconst = {
70 .extra_priv_size = sizeof(struct omap_hcd),
71};
72
73/**
74 * ehci_hcd_omap_probe - initialize TI-based HCDs
75 * @pdev: Pointer to this platform device's information
76 *
77 * Allocates basic resources for this USB host controller, and
78 * then invokes the start() method for the HCD associated with it
79 * through the hotplug entry's driver_data.
80 */
81static int ehci_hcd_omap_probe(struct platform_device *pdev)
82{
83 struct device *dev = &pdev->dev;
84 struct usbhs_omap_platform_data *pdata = dev_get_platdata(dev);
85 struct resource *res;
86 struct usb_hcd *hcd;
87 void __iomem *regs;
88 int ret;
89 int irq;
90 int i;
91 struct omap_hcd *omap;
92
93 if (usb_disabled())
94 return -ENODEV;
95
96 if (!dev->parent) {
97 dev_err(dev, "Missing parent device\n");
98 return -ENODEV;
99 }
100
101 /* For DT boot, get platform data from parent. i.e. usbhshost */
102 if (dev->of_node) {
103 pdata = dev_get_platdata(dev->parent);
104 dev->platform_data = pdata;
105 }
106
107 if (!pdata) {
108 dev_err(dev, "Missing platform data\n");
109 return -ENODEV;
110 }
111
112 irq = platform_get_irq(pdev, 0);
113 if (irq < 0)
114 return irq;
115
116 regs = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
117 if (IS_ERR(regs))
118 return PTR_ERR(regs);
119
120 /*
121 * Right now device-tree probed devices don't get dma_mask set.
122 * Since shared usb code relies on it, set it here for now.
123 * Once we have dma capability bindings this can go away.
124 */
125 ret = dma_coerce_mask_and_coherent(dev, DMA_BIT_MASK(32));
126 if (ret)
127 return ret;
128
129 ret = -ENODEV;
130 hcd = usb_create_hcd(&ehci_omap_hc_driver, dev,
131 dev_name(dev));
132 if (!hcd) {
133 dev_err(dev, "Failed to create HCD\n");
134 return -ENOMEM;
135 }
136
137 hcd->rsrc_start = res->start;
138 hcd->rsrc_len = resource_size(res);
139 hcd->regs = regs;
140 hcd_to_ehci(hcd)->caps = regs;
141
142 omap = (struct omap_hcd *)hcd_to_ehci(hcd)->priv;
143 omap->nports = pdata->nports;
144
145 platform_set_drvdata(pdev, hcd);
146
147 /* get the PHY devices if needed */
148 for (i = 0 ; i < omap->nports ; i++) {
149 struct usb_phy *phy;
150
151 /* get the PHY device */
152 phy = devm_usb_get_phy_by_phandle(dev, "phys", i);
153 if (IS_ERR(phy)) {
154 ret = PTR_ERR(phy);
155 if (ret == -ENODEV) { /* no PHY */
156 phy = NULL;
157 continue;
158 }
159
160 if (ret != -EPROBE_DEFER)
161 dev_err(dev, "Can't get PHY for port %d: %d\n",
162 i, ret);
163 goto err_phy;
164 }
165
166 omap->phy[i] = phy;
167
168 if (pdata->port_mode[i] == OMAP_EHCI_PORT_MODE_PHY) {
169 usb_phy_init(omap->phy[i]);
170 /* bring PHY out of suspend */
171 usb_phy_set_suspend(omap->phy[i], 0);
172 }
173 }
174
175 pm_runtime_enable(dev);
176 pm_runtime_get_sync(dev);
177
178 /*
179 * An undocumented "feature" in the OMAP3 EHCI controller,
180 * causes suspended ports to be taken out of suspend when
181 * the USBCMD.Run/Stop bit is cleared (for example when
182 * we do ehci_bus_suspend).
183 * This breaks suspend-resume if the root-hub is allowed
184 * to suspend. Writing 1 to this undocumented register bit
185 * disables this feature and restores normal behavior.
186 */
187 ehci_write(regs, EHCI_INSNREG04,
188 EHCI_INSNREG04_DISABLE_UNSUSPEND);
189
190 ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
191 if (ret) {
192 dev_err(dev, "failed to add hcd with err %d\n", ret);
193 goto err_pm_runtime;
194 }
195 device_wakeup_enable(hcd->self.controller);
196
197 /*
198 * Bring PHYs out of reset for non PHY modes.
199 * Even though HSIC mode is a PHY-less mode, the reset
200 * line exists between the chips and can be modelled
201 * as a PHY device for reset control.
202 */
203 for (i = 0; i < omap->nports; i++) {
204 if (!omap->phy[i] ||
205 pdata->port_mode[i] == OMAP_EHCI_PORT_MODE_PHY)
206 continue;
207
208 usb_phy_init(omap->phy[i]);
209 /* bring PHY out of suspend */
210 usb_phy_set_suspend(omap->phy[i], 0);
211 }
212
213 return 0;
214
215err_pm_runtime:
216 pm_runtime_put_sync(dev);
217 pm_runtime_disable(dev);
218
219err_phy:
220 for (i = 0; i < omap->nports; i++) {
221 if (omap->phy[i])
222 usb_phy_shutdown(omap->phy[i]);
223 }
224
225 usb_put_hcd(hcd);
226
227 return ret;
228}
229
230
231/**
232 * ehci_hcd_omap_remove - shutdown processing for EHCI HCDs
233 * @pdev: USB Host Controller being removed
234 *
235 * Reverses the effect of usb_ehci_hcd_omap_probe(), first invoking
236 * the HCD's stop() method. It is always called from a thread
237 * context, normally "rmmod", "apmd", or something similar.
238 */
239static void ehci_hcd_omap_remove(struct platform_device *pdev)
240{
241 struct device *dev = &pdev->dev;
242 struct usb_hcd *hcd = dev_get_drvdata(dev);
243 struct omap_hcd *omap = (struct omap_hcd *)hcd_to_ehci(hcd)->priv;
244 int i;
245
246 usb_remove_hcd(hcd);
247
248 for (i = 0; i < omap->nports; i++) {
249 if (omap->phy[i])
250 usb_phy_shutdown(omap->phy[i]);
251 }
252
253 usb_put_hcd(hcd);
254 pm_runtime_put_sync(dev);
255 pm_runtime_disable(dev);
256}
257
258static const struct of_device_id omap_ehci_dt_ids[] = {
259 { .compatible = "ti,ehci-omap" },
260 { }
261};
262
263MODULE_DEVICE_TABLE(of, omap_ehci_dt_ids);
264
265static struct platform_driver ehci_hcd_omap_driver = {
266 .probe = ehci_hcd_omap_probe,
267 .remove_new = ehci_hcd_omap_remove,
268 .shutdown = usb_hcd_platform_shutdown,
269 /*.suspend = ehci_hcd_omap_suspend, */
270 /*.resume = ehci_hcd_omap_resume, */
271 .driver = {
272 .name = hcd_name,
273 .of_match_table = omap_ehci_dt_ids,
274 }
275};
276
277/*-------------------------------------------------------------------------*/
278
279static int __init ehci_omap_init(void)
280{
281 if (usb_disabled())
282 return -ENODEV;
283
284 ehci_init_driver(&ehci_omap_hc_driver, &ehci_omap_overrides);
285 return platform_driver_register(&ehci_hcd_omap_driver);
286}
287module_init(ehci_omap_init);
288
289static void __exit ehci_omap_cleanup(void)
290{
291 platform_driver_unregister(&ehci_hcd_omap_driver);
292}
293module_exit(ehci_omap_cleanup);
294
295MODULE_ALIAS("platform:ehci-omap");
296MODULE_AUTHOR("Texas Instruments, Inc.");
297MODULE_AUTHOR("Felipe Balbi <felipe.balbi@nokia.com>");
298MODULE_AUTHOR("Roger Quadros <rogerq@ti.com>");
299
300MODULE_DESCRIPTION(DRIVER_DESC);
301MODULE_LICENSE("GPL");
1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * ehci-omap.c - driver for USBHOST on OMAP3/4 processors
4 *
5 * Bus Glue for the EHCI controllers in OMAP3/4
6 * Tested on several OMAP3 boards, and OMAP4 Pandaboard
7 *
8 * Copyright (C) 2007-2013 Texas Instruments, Inc.
9 * Author: Vikram Pandita <vikram.pandita@ti.com>
10 * Author: Anand Gadiyar <gadiyar@ti.com>
11 * Author: Keshava Munegowda <keshava_mgowda@ti.com>
12 * Author: Roger Quadros <rogerq@ti.com>
13 *
14 * Copyright (C) 2009 Nokia Corporation
15 * Contact: Felipe Balbi <felipe.balbi@nokia.com>
16 *
17 * Based on "ehci-fsl.c" and "ehci-au1xxx.c" ehci glue layers
18 */
19
20#include <linux/kernel.h>
21#include <linux/module.h>
22#include <linux/io.h>
23#include <linux/platform_device.h>
24#include <linux/slab.h>
25#include <linux/usb/ulpi.h>
26#include <linux/pm_runtime.h>
27#include <linux/gpio.h>
28#include <linux/clk.h>
29#include <linux/usb.h>
30#include <linux/usb/hcd.h>
31#include <linux/of.h>
32#include <linux/dma-mapping.h>
33
34#include "ehci.h"
35
36#include <linux/platform_data/usb-omap.h>
37
38/* EHCI Register Set */
39#define EHCI_INSNREG04 (0xA0)
40#define EHCI_INSNREG04_DISABLE_UNSUSPEND (1 << 5)
41#define EHCI_INSNREG05_ULPI (0xA4)
42#define EHCI_INSNREG05_ULPI_CONTROL_SHIFT 31
43#define EHCI_INSNREG05_ULPI_PORTSEL_SHIFT 24
44#define EHCI_INSNREG05_ULPI_OPSEL_SHIFT 22
45#define EHCI_INSNREG05_ULPI_REGADD_SHIFT 16
46#define EHCI_INSNREG05_ULPI_EXTREGADD_SHIFT 8
47#define EHCI_INSNREG05_ULPI_WRDATA_SHIFT 0
48
49#define DRIVER_DESC "OMAP-EHCI Host Controller driver"
50
51static const char hcd_name[] = "ehci-omap";
52
53/*-------------------------------------------------------------------------*/
54
55struct omap_hcd {
56 struct usb_phy *phy[OMAP3_HS_USB_PORTS]; /* one PHY for each port */
57 int nports;
58};
59
60static inline void ehci_write(void __iomem *base, u32 reg, u32 val)
61{
62 __raw_writel(val, base + reg);
63}
64
65static inline u32 ehci_read(void __iomem *base, u32 reg)
66{
67 return __raw_readl(base + reg);
68}
69
70/* configure so an HC device and id are always provided */
71/* always called with process context; sleeping is OK */
72
73static struct hc_driver __read_mostly ehci_omap_hc_driver;
74
75static const struct ehci_driver_overrides ehci_omap_overrides __initconst = {
76 .extra_priv_size = sizeof(struct omap_hcd),
77};
78
79/**
80 * ehci_hcd_omap_probe - initialize TI-based HCDs
81 *
82 * Allocates basic resources for this USB host controller, and
83 * then invokes the start() method for the HCD associated with it
84 * through the hotplug entry's driver_data.
85 */
86static int ehci_hcd_omap_probe(struct platform_device *pdev)
87{
88 struct device *dev = &pdev->dev;
89 struct usbhs_omap_platform_data *pdata = dev_get_platdata(dev);
90 struct resource *res;
91 struct usb_hcd *hcd;
92 void __iomem *regs;
93 int ret;
94 int irq;
95 int i;
96 struct omap_hcd *omap;
97
98 if (usb_disabled())
99 return -ENODEV;
100
101 if (!dev->parent) {
102 dev_err(dev, "Missing parent device\n");
103 return -ENODEV;
104 }
105
106 /* For DT boot, get platform data from parent. i.e. usbhshost */
107 if (dev->of_node) {
108 pdata = dev_get_platdata(dev->parent);
109 dev->platform_data = pdata;
110 }
111
112 if (!pdata) {
113 dev_err(dev, "Missing platform data\n");
114 return -ENODEV;
115 }
116
117 irq = platform_get_irq(pdev, 0);
118 if (irq < 0) {
119 dev_err(dev, "EHCI irq failed: %d\n", irq);
120 return irq;
121 }
122
123 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
124 regs = devm_ioremap_resource(dev, res);
125 if (IS_ERR(regs))
126 return PTR_ERR(regs);
127
128 /*
129 * Right now device-tree probed devices don't get dma_mask set.
130 * Since shared usb code relies on it, set it here for now.
131 * Once we have dma capability bindings this can go away.
132 */
133 ret = dma_coerce_mask_and_coherent(dev, DMA_BIT_MASK(32));
134 if (ret)
135 return ret;
136
137 ret = -ENODEV;
138 hcd = usb_create_hcd(&ehci_omap_hc_driver, dev,
139 dev_name(dev));
140 if (!hcd) {
141 dev_err(dev, "Failed to create HCD\n");
142 return -ENOMEM;
143 }
144
145 hcd->rsrc_start = res->start;
146 hcd->rsrc_len = resource_size(res);
147 hcd->regs = regs;
148 hcd_to_ehci(hcd)->caps = regs;
149
150 omap = (struct omap_hcd *)hcd_to_ehci(hcd)->priv;
151 omap->nports = pdata->nports;
152
153 platform_set_drvdata(pdev, hcd);
154
155 /* get the PHY devices if needed */
156 for (i = 0 ; i < omap->nports ; i++) {
157 struct usb_phy *phy;
158
159 /* get the PHY device */
160 if (dev->of_node)
161 phy = devm_usb_get_phy_by_phandle(dev, "phys", i);
162 else
163 phy = devm_usb_get_phy_dev(dev, i);
164 if (IS_ERR(phy)) {
165 /* Don't bail out if PHY is not absolutely necessary */
166 if (pdata->port_mode[i] != OMAP_EHCI_PORT_MODE_PHY)
167 continue;
168
169 ret = PTR_ERR(phy);
170 if (ret != -EPROBE_DEFER)
171 dev_err(dev, "Can't get PHY for port %d: %d\n",
172 i, ret);
173 goto err_phy;
174 }
175
176 omap->phy[i] = phy;
177
178 if (pdata->port_mode[i] == OMAP_EHCI_PORT_MODE_PHY) {
179 usb_phy_init(omap->phy[i]);
180 /* bring PHY out of suspend */
181 usb_phy_set_suspend(omap->phy[i], 0);
182 }
183 }
184
185 pm_runtime_enable(dev);
186 pm_runtime_get_sync(dev);
187
188 /*
189 * An undocumented "feature" in the OMAP3 EHCI controller,
190 * causes suspended ports to be taken out of suspend when
191 * the USBCMD.Run/Stop bit is cleared (for example when
192 * we do ehci_bus_suspend).
193 * This breaks suspend-resume if the root-hub is allowed
194 * to suspend. Writing 1 to this undocumented register bit
195 * disables this feature and restores normal behavior.
196 */
197 ehci_write(regs, EHCI_INSNREG04,
198 EHCI_INSNREG04_DISABLE_UNSUSPEND);
199
200 ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
201 if (ret) {
202 dev_err(dev, "failed to add hcd with err %d\n", ret);
203 goto err_pm_runtime;
204 }
205 device_wakeup_enable(hcd->self.controller);
206
207 /*
208 * Bring PHYs out of reset for non PHY modes.
209 * Even though HSIC mode is a PHY-less mode, the reset
210 * line exists between the chips and can be modelled
211 * as a PHY device for reset control.
212 */
213 for (i = 0; i < omap->nports; i++) {
214 if (!omap->phy[i] ||
215 pdata->port_mode[i] == OMAP_EHCI_PORT_MODE_PHY)
216 continue;
217
218 usb_phy_init(omap->phy[i]);
219 /* bring PHY out of suspend */
220 usb_phy_set_suspend(omap->phy[i], 0);
221 }
222
223 return 0;
224
225err_pm_runtime:
226 pm_runtime_put_sync(dev);
227
228err_phy:
229 for (i = 0; i < omap->nports; i++) {
230 if (omap->phy[i])
231 usb_phy_shutdown(omap->phy[i]);
232 }
233
234 usb_put_hcd(hcd);
235
236 return ret;
237}
238
239
240/**
241 * ehci_hcd_omap_remove - shutdown processing for EHCI HCDs
242 * @pdev: USB Host Controller being removed
243 *
244 * Reverses the effect of usb_ehci_hcd_omap_probe(), first invoking
245 * the HCD's stop() method. It is always called from a thread
246 * context, normally "rmmod", "apmd", or something similar.
247 */
248static int ehci_hcd_omap_remove(struct platform_device *pdev)
249{
250 struct device *dev = &pdev->dev;
251 struct usb_hcd *hcd = dev_get_drvdata(dev);
252 struct omap_hcd *omap = (struct omap_hcd *)hcd_to_ehci(hcd)->priv;
253 int i;
254
255 usb_remove_hcd(hcd);
256
257 for (i = 0; i < omap->nports; i++) {
258 if (omap->phy[i])
259 usb_phy_shutdown(omap->phy[i]);
260 }
261
262 usb_put_hcd(hcd);
263 pm_runtime_put_sync(dev);
264 pm_runtime_disable(dev);
265
266 return 0;
267}
268
269static const struct of_device_id omap_ehci_dt_ids[] = {
270 { .compatible = "ti,ehci-omap" },
271 { }
272};
273
274MODULE_DEVICE_TABLE(of, omap_ehci_dt_ids);
275
276static struct platform_driver ehci_hcd_omap_driver = {
277 .probe = ehci_hcd_omap_probe,
278 .remove = ehci_hcd_omap_remove,
279 .shutdown = usb_hcd_platform_shutdown,
280 /*.suspend = ehci_hcd_omap_suspend, */
281 /*.resume = ehci_hcd_omap_resume, */
282 .driver = {
283 .name = hcd_name,
284 .of_match_table = omap_ehci_dt_ids,
285 }
286};
287
288/*-------------------------------------------------------------------------*/
289
290static int __init ehci_omap_init(void)
291{
292 if (usb_disabled())
293 return -ENODEV;
294
295 pr_info("%s: " DRIVER_DESC "\n", hcd_name);
296
297 ehci_init_driver(&ehci_omap_hc_driver, &ehci_omap_overrides);
298 return platform_driver_register(&ehci_hcd_omap_driver);
299}
300module_init(ehci_omap_init);
301
302static void __exit ehci_omap_cleanup(void)
303{
304 platform_driver_unregister(&ehci_hcd_omap_driver);
305}
306module_exit(ehci_omap_cleanup);
307
308MODULE_ALIAS("platform:ehci-omap");
309MODULE_AUTHOR("Texas Instruments, Inc.");
310MODULE_AUTHOR("Felipe Balbi <felipe.balbi@nokia.com>");
311MODULE_AUTHOR("Roger Quadros <rogerq@ti.com>");
312
313MODULE_DESCRIPTION(DRIVER_DESC);
314MODULE_LICENSE("GPL");