Loading...
1// SPDX-License-Identifier: GPL-2.0+
2/******************************************************************************
3 * cxacru.c - driver for USB ADSL modems based on
4 * Conexant AccessRunner chipset
5 *
6 * Copyright (C) 2004 David Woodhouse, Duncan Sands, Roman Kagan
7 * Copyright (C) 2005 Duncan Sands, Roman Kagan (rkagan % mail ! ru)
8 * Copyright (C) 2007 Simon Arlott
9 * Copyright (C) 2009 Simon Arlott
10 ******************************************************************************/
11
12/*
13 * Credit is due for Josep Comas, who created the original patch to speedtch.c
14 * to support the different padding used by the AccessRunner (now generalized
15 * into usbatm), and the userspace firmware loading utility.
16 */
17
18#include <linux/module.h>
19#include <linux/moduleparam.h>
20#include <linux/kernel.h>
21#include <linux/timer.h>
22#include <linux/errno.h>
23#include <linux/slab.h>
24#include <linux/device.h>
25#include <linux/firmware.h>
26#include <linux/mutex.h>
27#include <asm/unaligned.h>
28
29#include "usbatm.h"
30
31#define DRIVER_AUTHOR "Roman Kagan, David Woodhouse, Duncan Sands, Simon Arlott"
32#define DRIVER_DESC "Conexant AccessRunner ADSL USB modem driver"
33
34static const char cxacru_driver_name[] = "cxacru";
35
36#define CXACRU_EP_CMD 0x01 /* Bulk/interrupt in/out */
37#define CXACRU_EP_DATA 0x02 /* Bulk in/out */
38
39#define CMD_PACKET_SIZE 64 /* Should be maxpacket(ep)? */
40#define CMD_MAX_CONFIG ((CMD_PACKET_SIZE / 4 - 1) / 2)
41
42/* Addresses */
43#define PLLFCLK_ADDR 0x00350068
44#define PLLBCLK_ADDR 0x0035006c
45#define SDRAMEN_ADDR 0x00350010
46#define FW_ADDR 0x00801000
47#define BR_ADDR 0x00180600
48#define SIG_ADDR 0x00180500
49#define BR_STACK_ADDR 0x00187f10
50
51/* Values */
52#define SDRAM_ENA 0x1
53
54#define CMD_TIMEOUT 2000 /* msecs */
55#define POLL_INTERVAL 1 /* secs */
56
57/* commands for interaction with the modem through the control channel before
58 * firmware is loaded */
59enum cxacru_fw_request {
60 FW_CMD_ERR,
61 FW_GET_VER,
62 FW_READ_MEM,
63 FW_WRITE_MEM,
64 FW_RMW_MEM,
65 FW_CHECKSUM_MEM,
66 FW_GOTO_MEM,
67};
68
69/* commands for interaction with the modem through the control channel once
70 * firmware is loaded */
71enum cxacru_cm_request {
72 CM_REQUEST_UNDEFINED = 0x80,
73 CM_REQUEST_TEST,
74 CM_REQUEST_CHIP_GET_MAC_ADDRESS,
75 CM_REQUEST_CHIP_GET_DP_VERSIONS,
76 CM_REQUEST_CHIP_ADSL_LINE_START,
77 CM_REQUEST_CHIP_ADSL_LINE_STOP,
78 CM_REQUEST_CHIP_ADSL_LINE_GET_STATUS,
79 CM_REQUEST_CHIP_ADSL_LINE_GET_SPEED,
80 CM_REQUEST_CARD_INFO_GET,
81 CM_REQUEST_CARD_DATA_GET,
82 CM_REQUEST_CARD_DATA_SET,
83 CM_REQUEST_COMMAND_HW_IO,
84 CM_REQUEST_INTERFACE_HW_IO,
85 CM_REQUEST_CARD_SERIAL_DATA_PATH_GET,
86 CM_REQUEST_CARD_SERIAL_DATA_PATH_SET,
87 CM_REQUEST_CARD_CONTROLLER_VERSION_GET,
88 CM_REQUEST_CARD_GET_STATUS,
89 CM_REQUEST_CARD_GET_MAC_ADDRESS,
90 CM_REQUEST_CARD_GET_DATA_LINK_STATUS,
91 CM_REQUEST_MAX,
92};
93
94/* commands for interaction with the flash memory
95 *
96 * read: response is the contents of the first 60 bytes of flash memory
97 * write: request contains the 60 bytes of data to write to flash memory
98 * response is the contents of the first 60 bytes of flash memory
99 *
100 * layout: PP PP VV VV MM MM MM MM MM MM ?? ?? SS SS SS SS SS SS SS SS
101 * SS SS SS SS SS SS SS SS 00 00 00 00 00 00 00 00 00 00 00 00
102 * 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
103 *
104 * P: le16 USB Product ID
105 * V: le16 USB Vendor ID
106 * M: be48 MAC Address
107 * S: le16 ASCII Serial Number
108 */
109enum cxacru_cm_flash {
110 CM_FLASH_READ = 0xa1,
111 CM_FLASH_WRITE = 0xa2
112};
113
114/* reply codes to the commands above */
115enum cxacru_cm_status {
116 CM_STATUS_UNDEFINED,
117 CM_STATUS_SUCCESS,
118 CM_STATUS_ERROR,
119 CM_STATUS_UNSUPPORTED,
120 CM_STATUS_UNIMPLEMENTED,
121 CM_STATUS_PARAMETER_ERROR,
122 CM_STATUS_DBG_LOOPBACK,
123 CM_STATUS_MAX,
124};
125
126/* indices into CARD_INFO_GET return array */
127enum cxacru_info_idx {
128 CXINF_DOWNSTREAM_RATE,
129 CXINF_UPSTREAM_RATE,
130 CXINF_LINK_STATUS,
131 CXINF_LINE_STATUS,
132 CXINF_MAC_ADDRESS_HIGH,
133 CXINF_MAC_ADDRESS_LOW,
134 CXINF_UPSTREAM_SNR_MARGIN,
135 CXINF_DOWNSTREAM_SNR_MARGIN,
136 CXINF_UPSTREAM_ATTENUATION,
137 CXINF_DOWNSTREAM_ATTENUATION,
138 CXINF_TRANSMITTER_POWER,
139 CXINF_UPSTREAM_BITS_PER_FRAME,
140 CXINF_DOWNSTREAM_BITS_PER_FRAME,
141 CXINF_STARTUP_ATTEMPTS,
142 CXINF_UPSTREAM_CRC_ERRORS,
143 CXINF_DOWNSTREAM_CRC_ERRORS,
144 CXINF_UPSTREAM_FEC_ERRORS,
145 CXINF_DOWNSTREAM_FEC_ERRORS,
146 CXINF_UPSTREAM_HEC_ERRORS,
147 CXINF_DOWNSTREAM_HEC_ERRORS,
148 CXINF_LINE_STARTABLE,
149 CXINF_MODULATION,
150 CXINF_ADSL_HEADEND,
151 CXINF_ADSL_HEADEND_ENVIRONMENT,
152 CXINF_CONTROLLER_VERSION,
153 /* dunno what the missing two mean */
154 CXINF_MAX = 0x1c,
155};
156
157enum cxacru_poll_state {
158 CXPOLL_STOPPING,
159 CXPOLL_STOPPED,
160 CXPOLL_POLLING,
161 CXPOLL_SHUTDOWN
162};
163
164struct cxacru_modem_type {
165 u32 pll_f_clk;
166 u32 pll_b_clk;
167 int boot_rom_patch;
168};
169
170struct cxacru_data {
171 struct usbatm_data *usbatm;
172
173 const struct cxacru_modem_type *modem_type;
174
175 int line_status;
176 struct mutex adsl_state_serialize;
177 int adsl_status;
178 struct delayed_work poll_work;
179 u32 card_info[CXINF_MAX];
180 struct mutex poll_state_serialize;
181 enum cxacru_poll_state poll_state;
182
183 /* control handles */
184 struct mutex cm_serialize;
185 u8 *rcv_buf;
186 u8 *snd_buf;
187 struct urb *rcv_urb;
188 struct urb *snd_urb;
189 struct completion rcv_done;
190 struct completion snd_done;
191};
192
193static int cxacru_cm(struct cxacru_data *instance, enum cxacru_cm_request cm,
194 u8 *wdata, int wsize, u8 *rdata, int rsize);
195static void cxacru_poll_status(struct work_struct *work);
196
197/* Card info exported through sysfs */
198#define CXACRU__ATTR_INIT(_name) \
199static DEVICE_ATTR_RO(_name)
200
201#define CXACRU_CMD_INIT(_name) \
202static DEVICE_ATTR_RW(_name)
203
204#define CXACRU_SET_INIT(_name) \
205static DEVICE_ATTR_WO(_name)
206
207#define CXACRU_ATTR_INIT(_value, _type, _name) \
208static ssize_t _name##_show(struct device *dev, \
209 struct device_attribute *attr, char *buf) \
210{ \
211 struct cxacru_data *instance = to_usbatm_driver_data(\
212 to_usb_interface(dev)); \
213\
214 if (instance == NULL) \
215 return -ENODEV; \
216\
217 return cxacru_sysfs_showattr_##_type(instance->card_info[_value], buf); \
218} \
219CXACRU__ATTR_INIT(_name)
220
221#define CXACRU_ATTR_CREATE(_v, _t, _name) CXACRU_DEVICE_CREATE_FILE(_name)
222#define CXACRU_CMD_CREATE(_name) CXACRU_DEVICE_CREATE_FILE(_name)
223#define CXACRU_SET_CREATE(_name) CXACRU_DEVICE_CREATE_FILE(_name)
224#define CXACRU__ATTR_CREATE(_name) CXACRU_DEVICE_CREATE_FILE(_name)
225
226#define CXACRU_ATTR_REMOVE(_v, _t, _name) CXACRU_DEVICE_REMOVE_FILE(_name)
227#define CXACRU_CMD_REMOVE(_name) CXACRU_DEVICE_REMOVE_FILE(_name)
228#define CXACRU_SET_REMOVE(_name) CXACRU_DEVICE_REMOVE_FILE(_name)
229#define CXACRU__ATTR_REMOVE(_name) CXACRU_DEVICE_REMOVE_FILE(_name)
230
231static ssize_t cxacru_sysfs_showattr_u32(u32 value, char *buf)
232{
233 return sprintf(buf, "%u\n", value);
234}
235
236static ssize_t cxacru_sysfs_showattr_s8(s8 value, char *buf)
237{
238 return sprintf(buf, "%d\n", value);
239}
240
241static ssize_t cxacru_sysfs_showattr_dB(s16 value, char *buf)
242{
243 if (likely(value >= 0)) {
244 return snprintf(buf, PAGE_SIZE, "%u.%02u\n",
245 value / 100, value % 100);
246 } else {
247 value = -value;
248 return snprintf(buf, PAGE_SIZE, "-%u.%02u\n",
249 value / 100, value % 100);
250 }
251}
252
253static ssize_t cxacru_sysfs_showattr_bool(u32 value, char *buf)
254{
255 static char *str[] = { "no", "yes" };
256
257 if (unlikely(value >= ARRAY_SIZE(str)))
258 return sprintf(buf, "%u\n", value);
259 return sprintf(buf, "%s\n", str[value]);
260}
261
262static ssize_t cxacru_sysfs_showattr_LINK(u32 value, char *buf)
263{
264 static char *str[] = { NULL, "not connected", "connected", "lost" };
265
266 if (unlikely(value >= ARRAY_SIZE(str) || str[value] == NULL))
267 return sprintf(buf, "%u\n", value);
268 return sprintf(buf, "%s\n", str[value]);
269}
270
271static ssize_t cxacru_sysfs_showattr_LINE(u32 value, char *buf)
272{
273 static char *str[] = { "down", "attempting to activate",
274 "training", "channel analysis", "exchange", "up",
275 "waiting", "initialising"
276 };
277 if (unlikely(value >= ARRAY_SIZE(str)))
278 return sprintf(buf, "%u\n", value);
279 return sprintf(buf, "%s\n", str[value]);
280}
281
282static ssize_t cxacru_sysfs_showattr_MODU(u32 value, char *buf)
283{
284 static char *str[] = {
285 "",
286 "ANSI T1.413",
287 "ITU-T G.992.1 (G.DMT)",
288 "ITU-T G.992.2 (G.LITE)"
289 };
290 if (unlikely(value >= ARRAY_SIZE(str)))
291 return sprintf(buf, "%u\n", value);
292 return sprintf(buf, "%s\n", str[value]);
293}
294
295/*
296 * This could use MAC_ADDRESS_HIGH and MAC_ADDRESS_LOW, but since
297 * this data is already in atm_dev there's no point.
298 *
299 * MAC_ADDRESS_HIGH = 0x????5544
300 * MAC_ADDRESS_LOW = 0x33221100
301 * Where 00-55 are bytes 0-5 of the MAC.
302 */
303static ssize_t mac_address_show(struct device *dev,
304 struct device_attribute *attr, char *buf)
305{
306 struct cxacru_data *instance = to_usbatm_driver_data(
307 to_usb_interface(dev));
308
309 if (instance == NULL || instance->usbatm->atm_dev == NULL)
310 return -ENODEV;
311
312 return sprintf(buf, "%pM\n", instance->usbatm->atm_dev->esi);
313}
314
315static ssize_t adsl_state_show(struct device *dev,
316 struct device_attribute *attr, char *buf)
317{
318 static char *str[] = { "running", "stopped" };
319 struct cxacru_data *instance = to_usbatm_driver_data(
320 to_usb_interface(dev));
321 u32 value;
322
323 if (instance == NULL)
324 return -ENODEV;
325
326 value = instance->card_info[CXINF_LINE_STARTABLE];
327 if (unlikely(value >= ARRAY_SIZE(str)))
328 return sprintf(buf, "%u\n", value);
329 return sprintf(buf, "%s\n", str[value]);
330}
331
332static ssize_t adsl_state_store(struct device *dev,
333 struct device_attribute *attr, const char *buf, size_t count)
334{
335 struct cxacru_data *instance = to_usbatm_driver_data(
336 to_usb_interface(dev));
337 int ret;
338 int poll = -1;
339 char str_cmd[8];
340 int len = strlen(buf);
341
342 if (!capable(CAP_NET_ADMIN))
343 return -EACCES;
344
345 ret = sscanf(buf, "%7s", str_cmd);
346 if (ret != 1)
347 return -EINVAL;
348 ret = 0;
349
350 if (instance == NULL)
351 return -ENODEV;
352
353 if (mutex_lock_interruptible(&instance->adsl_state_serialize))
354 return -ERESTARTSYS;
355
356 if (!strcmp(str_cmd, "stop") || !strcmp(str_cmd, "restart")) {
357 ret = cxacru_cm(instance, CM_REQUEST_CHIP_ADSL_LINE_STOP, NULL, 0, NULL, 0);
358 if (ret < 0) {
359 atm_err(instance->usbatm, "change adsl state:"
360 " CHIP_ADSL_LINE_STOP returned %d\n", ret);
361
362 ret = -EIO;
363 } else {
364 ret = len;
365 poll = CXPOLL_STOPPED;
366 }
367 }
368
369 /* Line status is only updated every second
370 * and the device appears to only react to
371 * START/STOP every second too. Wait 1.5s to
372 * be sure that restart will have an effect. */
373 if (!strcmp(str_cmd, "restart"))
374 msleep(1500);
375
376 if (!strcmp(str_cmd, "start") || !strcmp(str_cmd, "restart")) {
377 ret = cxacru_cm(instance, CM_REQUEST_CHIP_ADSL_LINE_START, NULL, 0, NULL, 0);
378 if (ret < 0) {
379 atm_err(instance->usbatm, "change adsl state:"
380 " CHIP_ADSL_LINE_START returned %d\n", ret);
381
382 ret = -EIO;
383 } else {
384 ret = len;
385 poll = CXPOLL_POLLING;
386 }
387 }
388
389 if (!strcmp(str_cmd, "poll")) {
390 ret = len;
391 poll = CXPOLL_POLLING;
392 }
393
394 if (ret == 0) {
395 ret = -EINVAL;
396 poll = -1;
397 }
398
399 if (poll == CXPOLL_POLLING) {
400 mutex_lock(&instance->poll_state_serialize);
401 switch (instance->poll_state) {
402 case CXPOLL_STOPPED:
403 /* start polling */
404 instance->poll_state = CXPOLL_POLLING;
405 break;
406
407 case CXPOLL_STOPPING:
408 /* abort stop request */
409 instance->poll_state = CXPOLL_POLLING;
410 fallthrough;
411 case CXPOLL_POLLING:
412 case CXPOLL_SHUTDOWN:
413 /* don't start polling */
414 poll = -1;
415 }
416 mutex_unlock(&instance->poll_state_serialize);
417 } else if (poll == CXPOLL_STOPPED) {
418 mutex_lock(&instance->poll_state_serialize);
419 /* request stop */
420 if (instance->poll_state == CXPOLL_POLLING)
421 instance->poll_state = CXPOLL_STOPPING;
422 mutex_unlock(&instance->poll_state_serialize);
423 }
424
425 mutex_unlock(&instance->adsl_state_serialize);
426
427 if (poll == CXPOLL_POLLING)
428 cxacru_poll_status(&instance->poll_work.work);
429
430 return ret;
431}
432
433/* CM_REQUEST_CARD_DATA_GET times out, so no show attribute */
434
435static ssize_t adsl_config_store(struct device *dev,
436 struct device_attribute *attr, const char *buf, size_t count)
437{
438 struct cxacru_data *instance = to_usbatm_driver_data(
439 to_usb_interface(dev));
440 int len = strlen(buf);
441 int ret, pos, num;
442 __le32 data[CMD_PACKET_SIZE / 4];
443
444 if (!capable(CAP_NET_ADMIN))
445 return -EACCES;
446
447 if (instance == NULL)
448 return -ENODEV;
449
450 pos = 0;
451 num = 0;
452 while (pos < len) {
453 int tmp;
454 u32 index;
455 u32 value;
456
457 ret = sscanf(buf + pos, "%x=%x%n", &index, &value, &tmp);
458 if (ret < 2)
459 return -EINVAL;
460 if (index > 0x7f)
461 return -EINVAL;
462 if (tmp < 0 || tmp > len - pos)
463 return -EINVAL;
464 pos += tmp;
465
466 /* skip trailing newline */
467 if (buf[pos] == '\n' && pos == len-1)
468 pos++;
469
470 data[num * 2 + 1] = cpu_to_le32(index);
471 data[num * 2 + 2] = cpu_to_le32(value);
472 num++;
473
474 /* send config values when data buffer is full
475 * or no more data
476 */
477 if (pos >= len || num >= CMD_MAX_CONFIG) {
478 char log[CMD_MAX_CONFIG * 12 + 1]; /* %02x=%08x */
479
480 data[0] = cpu_to_le32(num);
481 ret = cxacru_cm(instance, CM_REQUEST_CARD_DATA_SET,
482 (u8 *) data, 4 + num * 8, NULL, 0);
483 if (ret < 0) {
484 atm_err(instance->usbatm,
485 "set card data returned %d\n", ret);
486 return -EIO;
487 }
488
489 for (tmp = 0; tmp < num; tmp++)
490 snprintf(log + tmp*12, 13, " %02x=%08x",
491 le32_to_cpu(data[tmp * 2 + 1]),
492 le32_to_cpu(data[tmp * 2 + 2]));
493 atm_info(instance->usbatm, "config%s\n", log);
494 num = 0;
495 }
496 }
497
498 return len;
499}
500
501/*
502 * All device attributes are included in CXACRU_ALL_FILES
503 * so that the same list can be used multiple times:
504 * INIT (define the device attributes)
505 * CREATE (create all the device files)
506 * REMOVE (remove all the device files)
507 *
508 * With the last two being defined as needed in the functions
509 * they are used in before calling CXACRU_ALL_FILES()
510 */
511#define CXACRU_ALL_FILES(_action) \
512CXACRU_ATTR_##_action(CXINF_DOWNSTREAM_RATE, u32, downstream_rate); \
513CXACRU_ATTR_##_action(CXINF_UPSTREAM_RATE, u32, upstream_rate); \
514CXACRU_ATTR_##_action(CXINF_LINK_STATUS, LINK, link_status); \
515CXACRU_ATTR_##_action(CXINF_LINE_STATUS, LINE, line_status); \
516CXACRU__ATTR_##_action( mac_address); \
517CXACRU_ATTR_##_action(CXINF_UPSTREAM_SNR_MARGIN, dB, upstream_snr_margin); \
518CXACRU_ATTR_##_action(CXINF_DOWNSTREAM_SNR_MARGIN, dB, downstream_snr_margin); \
519CXACRU_ATTR_##_action(CXINF_UPSTREAM_ATTENUATION, dB, upstream_attenuation); \
520CXACRU_ATTR_##_action(CXINF_DOWNSTREAM_ATTENUATION, dB, downstream_attenuation); \
521CXACRU_ATTR_##_action(CXINF_TRANSMITTER_POWER, s8, transmitter_power); \
522CXACRU_ATTR_##_action(CXINF_UPSTREAM_BITS_PER_FRAME, u32, upstream_bits_per_frame); \
523CXACRU_ATTR_##_action(CXINF_DOWNSTREAM_BITS_PER_FRAME, u32, downstream_bits_per_frame); \
524CXACRU_ATTR_##_action(CXINF_STARTUP_ATTEMPTS, u32, startup_attempts); \
525CXACRU_ATTR_##_action(CXINF_UPSTREAM_CRC_ERRORS, u32, upstream_crc_errors); \
526CXACRU_ATTR_##_action(CXINF_DOWNSTREAM_CRC_ERRORS, u32, downstream_crc_errors); \
527CXACRU_ATTR_##_action(CXINF_UPSTREAM_FEC_ERRORS, u32, upstream_fec_errors); \
528CXACRU_ATTR_##_action(CXINF_DOWNSTREAM_FEC_ERRORS, u32, downstream_fec_errors); \
529CXACRU_ATTR_##_action(CXINF_UPSTREAM_HEC_ERRORS, u32, upstream_hec_errors); \
530CXACRU_ATTR_##_action(CXINF_DOWNSTREAM_HEC_ERRORS, u32, downstream_hec_errors); \
531CXACRU_ATTR_##_action(CXINF_LINE_STARTABLE, bool, line_startable); \
532CXACRU_ATTR_##_action(CXINF_MODULATION, MODU, modulation); \
533CXACRU_ATTR_##_action(CXINF_ADSL_HEADEND, u32, adsl_headend); \
534CXACRU_ATTR_##_action(CXINF_ADSL_HEADEND_ENVIRONMENT, u32, adsl_headend_environment); \
535CXACRU_ATTR_##_action(CXINF_CONTROLLER_VERSION, u32, adsl_controller_version); \
536CXACRU_CMD_##_action( adsl_state); \
537CXACRU_SET_##_action( adsl_config);
538
539CXACRU_ALL_FILES(INIT);
540
541static struct attribute *cxacru_attrs[] = {
542 &dev_attr_adsl_config.attr,
543 &dev_attr_adsl_state.attr,
544 &dev_attr_adsl_controller_version.attr,
545 &dev_attr_adsl_headend_environment.attr,
546 &dev_attr_adsl_headend.attr,
547 &dev_attr_modulation.attr,
548 &dev_attr_line_startable.attr,
549 &dev_attr_downstream_hec_errors.attr,
550 &dev_attr_upstream_hec_errors.attr,
551 &dev_attr_downstream_fec_errors.attr,
552 &dev_attr_upstream_fec_errors.attr,
553 &dev_attr_downstream_crc_errors.attr,
554 &dev_attr_upstream_crc_errors.attr,
555 &dev_attr_startup_attempts.attr,
556 &dev_attr_downstream_bits_per_frame.attr,
557 &dev_attr_upstream_bits_per_frame.attr,
558 &dev_attr_transmitter_power.attr,
559 &dev_attr_downstream_attenuation.attr,
560 &dev_attr_upstream_attenuation.attr,
561 &dev_attr_downstream_snr_margin.attr,
562 &dev_attr_upstream_snr_margin.attr,
563 &dev_attr_mac_address.attr,
564 &dev_attr_line_status.attr,
565 &dev_attr_link_status.attr,
566 &dev_attr_upstream_rate.attr,
567 &dev_attr_downstream_rate.attr,
568 NULL,
569};
570ATTRIBUTE_GROUPS(cxacru);
571
572/* the following three functions are stolen from drivers/usb/core/message.c */
573static void cxacru_blocking_completion(struct urb *urb)
574{
575 complete(urb->context);
576}
577
578struct cxacru_timer {
579 struct timer_list timer;
580 struct urb *urb;
581};
582
583static void cxacru_timeout_kill(struct timer_list *t)
584{
585 struct cxacru_timer *timer = from_timer(timer, t, timer);
586
587 usb_unlink_urb(timer->urb);
588}
589
590static int cxacru_start_wait_urb(struct urb *urb, struct completion *done,
591 int *actual_length)
592{
593 struct cxacru_timer timer = {
594 .urb = urb,
595 };
596
597 timer_setup_on_stack(&timer.timer, cxacru_timeout_kill, 0);
598 mod_timer(&timer.timer, jiffies + msecs_to_jiffies(CMD_TIMEOUT));
599 wait_for_completion(done);
600 del_timer_sync(&timer.timer);
601 destroy_timer_on_stack(&timer.timer);
602
603 if (actual_length)
604 *actual_length = urb->actual_length;
605 return urb->status; /* must read status after completion */
606}
607
608static int cxacru_cm(struct cxacru_data *instance, enum cxacru_cm_request cm,
609 u8 *wdata, int wsize, u8 *rdata, int rsize)
610{
611 int ret, actlen;
612 int offb, offd;
613 const int stride = CMD_PACKET_SIZE - 4;
614 u8 *wbuf = instance->snd_buf;
615 u8 *rbuf = instance->rcv_buf;
616 int wbuflen = ((wsize - 1) / stride + 1) * CMD_PACKET_SIZE;
617 int rbuflen = ((rsize - 1) / stride + 1) * CMD_PACKET_SIZE;
618
619 if (wbuflen > PAGE_SIZE || rbuflen > PAGE_SIZE) {
620 if (printk_ratelimit())
621 usb_err(instance->usbatm, "requested transfer size too large (%d, %d)\n",
622 wbuflen, rbuflen);
623 ret = -ENOMEM;
624 goto err;
625 }
626
627 mutex_lock(&instance->cm_serialize);
628
629 /* submit reading urb before the writing one */
630 init_completion(&instance->rcv_done);
631 ret = usb_submit_urb(instance->rcv_urb, GFP_KERNEL);
632 if (ret < 0) {
633 if (printk_ratelimit())
634 usb_err(instance->usbatm, "submit of read urb for cm %#x failed (%d)\n",
635 cm, ret);
636 goto fail;
637 }
638
639 memset(wbuf, 0, wbuflen);
640 /* handle wsize == 0 */
641 wbuf[0] = cm;
642 for (offb = offd = 0; offd < wsize; offd += stride, offb += CMD_PACKET_SIZE) {
643 wbuf[offb] = cm;
644 memcpy(wbuf + offb + 4, wdata + offd, min_t(int, stride, wsize - offd));
645 }
646
647 instance->snd_urb->transfer_buffer_length = wbuflen;
648 init_completion(&instance->snd_done);
649 ret = usb_submit_urb(instance->snd_urb, GFP_KERNEL);
650 if (ret < 0) {
651 if (printk_ratelimit())
652 usb_err(instance->usbatm, "submit of write urb for cm %#x failed (%d)\n",
653 cm, ret);
654 goto fail;
655 }
656
657 ret = cxacru_start_wait_urb(instance->snd_urb, &instance->snd_done, NULL);
658 if (ret < 0) {
659 if (printk_ratelimit())
660 usb_err(instance->usbatm, "send of cm %#x failed (%d)\n", cm, ret);
661 goto fail;
662 }
663
664 ret = cxacru_start_wait_urb(instance->rcv_urb, &instance->rcv_done, &actlen);
665 if (ret < 0) {
666 if (printk_ratelimit())
667 usb_err(instance->usbatm, "receive of cm %#x failed (%d)\n", cm, ret);
668 goto fail;
669 }
670 if (actlen % CMD_PACKET_SIZE || !actlen) {
671 if (printk_ratelimit())
672 usb_err(instance->usbatm, "invalid response length to cm %#x: %d\n",
673 cm, actlen);
674 ret = -EIO;
675 goto fail;
676 }
677
678 /* check the return status and copy the data to the output buffer, if needed */
679 for (offb = offd = 0; offd < rsize && offb < actlen; offb += CMD_PACKET_SIZE) {
680 if (rbuf[offb] != cm) {
681 if (printk_ratelimit())
682 usb_err(instance->usbatm, "wrong cm %#x in response to cm %#x\n",
683 rbuf[offb], cm);
684 ret = -EIO;
685 goto fail;
686 }
687 if (rbuf[offb + 1] != CM_STATUS_SUCCESS) {
688 if (printk_ratelimit())
689 usb_err(instance->usbatm, "response to cm %#x failed: %#x\n",
690 cm, rbuf[offb + 1]);
691 ret = -EIO;
692 goto fail;
693 }
694 if (offd >= rsize)
695 break;
696 memcpy(rdata + offd, rbuf + offb + 4, min_t(int, stride, rsize - offd));
697 offd += stride;
698 }
699
700 ret = offd;
701 usb_dbg(instance->usbatm, "cm %#x\n", cm);
702fail:
703 mutex_unlock(&instance->cm_serialize);
704err:
705 return ret;
706}
707
708static int cxacru_cm_get_array(struct cxacru_data *instance, enum cxacru_cm_request cm,
709 u32 *data, int size)
710{
711 int ret, len;
712 __le32 *buf;
713 int offb;
714 unsigned int offd;
715 const int stride = CMD_PACKET_SIZE / (4 * 2) - 1;
716 int buflen = ((size - 1) / stride + 1 + size * 2) * 4;
717
718 buf = kmalloc(buflen, GFP_KERNEL);
719 if (!buf)
720 return -ENOMEM;
721
722 ret = cxacru_cm(instance, cm, NULL, 0, (u8 *) buf, buflen);
723 if (ret < 0)
724 goto cleanup;
725
726 /* len > 0 && len % 4 == 0 guaranteed by cxacru_cm() */
727 len = ret / 4;
728 for (offb = 0; offb < len; ) {
729 int l = le32_to_cpu(buf[offb++]);
730
731 if (l < 0 || l > stride || l > (len - offb) / 2) {
732 if (printk_ratelimit())
733 usb_err(instance->usbatm, "invalid data length from cm %#x: %d\n",
734 cm, l);
735 ret = -EIO;
736 goto cleanup;
737 }
738 while (l--) {
739 offd = le32_to_cpu(buf[offb++]);
740 if (offd >= size) {
741 if (printk_ratelimit())
742 usb_err(instance->usbatm, "wrong index %#x in response to cm %#x\n",
743 offd, cm);
744 ret = -EIO;
745 goto cleanup;
746 }
747 data[offd] = le32_to_cpu(buf[offb++]);
748 }
749 }
750
751 ret = 0;
752
753cleanup:
754 kfree(buf);
755 return ret;
756}
757
758static int cxacru_card_status(struct cxacru_data *instance)
759{
760 int ret = cxacru_cm(instance, CM_REQUEST_CARD_GET_STATUS, NULL, 0, NULL, 0);
761
762 if (ret < 0) { /* firmware not loaded */
763 usb_dbg(instance->usbatm, "cxacru_adsl_start: CARD_GET_STATUS returned %d\n", ret);
764 return ret;
765 }
766 return 0;
767}
768
769static int cxacru_atm_start(struct usbatm_data *usbatm_instance,
770 struct atm_dev *atm_dev)
771{
772 struct cxacru_data *instance = usbatm_instance->driver_data;
773 struct usb_interface *intf = usbatm_instance->usb_intf;
774 int ret;
775 int start_polling = 1;
776
777 dev_dbg(&intf->dev, "%s\n", __func__);
778
779 /* Read MAC address */
780 ret = cxacru_cm(instance, CM_REQUEST_CARD_GET_MAC_ADDRESS, NULL, 0,
781 atm_dev->esi, sizeof(atm_dev->esi));
782 if (ret < 0) {
783 atm_err(usbatm_instance, "cxacru_atm_start: CARD_GET_MAC_ADDRESS returned %d\n", ret);
784 return ret;
785 }
786
787 /* start ADSL */
788 mutex_lock(&instance->adsl_state_serialize);
789 ret = cxacru_cm(instance, CM_REQUEST_CHIP_ADSL_LINE_START, NULL, 0, NULL, 0);
790 if (ret < 0)
791 atm_err(usbatm_instance, "cxacru_atm_start: CHIP_ADSL_LINE_START returned %d\n", ret);
792
793 /* Start status polling */
794 mutex_lock(&instance->poll_state_serialize);
795 switch (instance->poll_state) {
796 case CXPOLL_STOPPED:
797 /* start polling */
798 instance->poll_state = CXPOLL_POLLING;
799 break;
800
801 case CXPOLL_STOPPING:
802 /* abort stop request */
803 instance->poll_state = CXPOLL_POLLING;
804 fallthrough;
805 case CXPOLL_POLLING:
806 case CXPOLL_SHUTDOWN:
807 /* don't start polling */
808 start_polling = 0;
809 }
810 mutex_unlock(&instance->poll_state_serialize);
811 mutex_unlock(&instance->adsl_state_serialize);
812
813 if (start_polling)
814 cxacru_poll_status(&instance->poll_work.work);
815 return 0;
816}
817
818static void cxacru_poll_status(struct work_struct *work)
819{
820 struct cxacru_data *instance =
821 container_of(work, struct cxacru_data, poll_work.work);
822 u32 buf[CXINF_MAX] = {};
823 struct usbatm_data *usbatm = instance->usbatm;
824 struct atm_dev *atm_dev = usbatm->atm_dev;
825 int keep_polling = 1;
826 int ret;
827
828 ret = cxacru_cm_get_array(instance, CM_REQUEST_CARD_INFO_GET, buf, CXINF_MAX);
829 if (ret < 0) {
830 if (ret != -ESHUTDOWN)
831 atm_warn(usbatm, "poll status: error %d\n", ret);
832
833 mutex_lock(&instance->poll_state_serialize);
834 if (instance->poll_state != CXPOLL_SHUTDOWN) {
835 instance->poll_state = CXPOLL_STOPPED;
836
837 if (ret != -ESHUTDOWN)
838 atm_warn(usbatm, "polling disabled, set adsl_state"
839 " to 'start' or 'poll' to resume\n");
840 }
841 mutex_unlock(&instance->poll_state_serialize);
842 goto reschedule;
843 }
844
845 memcpy(instance->card_info, buf, sizeof(instance->card_info));
846
847 if (instance->adsl_status != buf[CXINF_LINE_STARTABLE]) {
848 instance->adsl_status = buf[CXINF_LINE_STARTABLE];
849
850 switch (instance->adsl_status) {
851 case 0:
852 atm_info(usbatm, "ADSL state: running\n");
853 break;
854
855 case 1:
856 atm_info(usbatm, "ADSL state: stopped\n");
857 break;
858
859 default:
860 atm_info(usbatm, "Unknown adsl status %02x\n", instance->adsl_status);
861 break;
862 }
863 }
864
865 if (instance->line_status == buf[CXINF_LINE_STATUS])
866 goto reschedule;
867
868 instance->line_status = buf[CXINF_LINE_STATUS];
869 switch (instance->line_status) {
870 case 0:
871 atm_dev_signal_change(atm_dev, ATM_PHY_SIG_LOST);
872 atm_info(usbatm, "ADSL line: down\n");
873 break;
874
875 case 1:
876 atm_dev_signal_change(atm_dev, ATM_PHY_SIG_LOST);
877 atm_info(usbatm, "ADSL line: attempting to activate\n");
878 break;
879
880 case 2:
881 atm_dev_signal_change(atm_dev, ATM_PHY_SIG_LOST);
882 atm_info(usbatm, "ADSL line: training\n");
883 break;
884
885 case 3:
886 atm_dev_signal_change(atm_dev, ATM_PHY_SIG_LOST);
887 atm_info(usbatm, "ADSL line: channel analysis\n");
888 break;
889
890 case 4:
891 atm_dev_signal_change(atm_dev, ATM_PHY_SIG_LOST);
892 atm_info(usbatm, "ADSL line: exchange\n");
893 break;
894
895 case 5:
896 atm_dev->link_rate = buf[CXINF_DOWNSTREAM_RATE] * 1000 / 424;
897 atm_dev_signal_change(atm_dev, ATM_PHY_SIG_FOUND);
898
899 atm_info(usbatm, "ADSL line: up (%d kb/s down | %d kb/s up)\n",
900 buf[CXINF_DOWNSTREAM_RATE], buf[CXINF_UPSTREAM_RATE]);
901 break;
902
903 case 6:
904 atm_dev_signal_change(atm_dev, ATM_PHY_SIG_LOST);
905 atm_info(usbatm, "ADSL line: waiting\n");
906 break;
907
908 case 7:
909 atm_dev_signal_change(atm_dev, ATM_PHY_SIG_LOST);
910 atm_info(usbatm, "ADSL line: initializing\n");
911 break;
912
913 default:
914 atm_dev_signal_change(atm_dev, ATM_PHY_SIG_UNKNOWN);
915 atm_info(usbatm, "Unknown line state %02x\n", instance->line_status);
916 break;
917 }
918reschedule:
919
920 mutex_lock(&instance->poll_state_serialize);
921 if (instance->poll_state == CXPOLL_STOPPING &&
922 instance->adsl_status == 1 && /* stopped */
923 instance->line_status == 0) /* down */
924 instance->poll_state = CXPOLL_STOPPED;
925
926 if (instance->poll_state == CXPOLL_STOPPED)
927 keep_polling = 0;
928 mutex_unlock(&instance->poll_state_serialize);
929
930 if (keep_polling)
931 schedule_delayed_work(&instance->poll_work,
932 round_jiffies_relative(POLL_INTERVAL*HZ));
933}
934
935static int cxacru_fw(struct usb_device *usb_dev, enum cxacru_fw_request fw,
936 u8 code1, u8 code2, u32 addr, const u8 *data, int size)
937{
938 int ret;
939 u8 *buf;
940 int offd, offb;
941 const int stride = CMD_PACKET_SIZE - 8;
942
943 buf = (u8 *) __get_free_page(GFP_KERNEL);
944 if (!buf)
945 return -ENOMEM;
946
947 offb = offd = 0;
948 do {
949 int l = min_t(int, stride, size - offd);
950
951 buf[offb++] = fw;
952 buf[offb++] = l;
953 buf[offb++] = code1;
954 buf[offb++] = code2;
955 put_unaligned(cpu_to_le32(addr), (__le32 *)(buf + offb));
956 offb += 4;
957 addr += l;
958 if (l)
959 memcpy(buf + offb, data + offd, l);
960 if (l < stride)
961 memset(buf + offb + l, 0, stride - l);
962 offb += stride;
963 offd += stride;
964 if ((offb >= PAGE_SIZE) || (offd >= size)) {
965 ret = usb_bulk_msg(usb_dev, usb_sndbulkpipe(usb_dev, CXACRU_EP_CMD),
966 buf, offb, NULL, CMD_TIMEOUT);
967 if (ret < 0) {
968 dev_dbg(&usb_dev->dev, "sending fw %#x failed\n", fw);
969 goto cleanup;
970 }
971 offb = 0;
972 }
973 } while (offd < size);
974 dev_dbg(&usb_dev->dev, "sent fw %#x\n", fw);
975
976 ret = 0;
977
978cleanup:
979 free_page((unsigned long) buf);
980 return ret;
981}
982
983static void cxacru_upload_firmware(struct cxacru_data *instance,
984 const struct firmware *fw,
985 const struct firmware *bp)
986{
987 int ret;
988 struct usbatm_data *usbatm = instance->usbatm;
989 struct usb_device *usb_dev = usbatm->usb_dev;
990 __le16 signature[] = { usb_dev->descriptor.idVendor,
991 usb_dev->descriptor.idProduct };
992 __le32 val;
993
994 usb_dbg(usbatm, "%s\n", __func__);
995
996 /* FirmwarePllFClkValue */
997 val = cpu_to_le32(instance->modem_type->pll_f_clk);
998 ret = cxacru_fw(usb_dev, FW_WRITE_MEM, 0x2, 0x0, PLLFCLK_ADDR, (u8 *) &val, 4);
999 if (ret) {
1000 usb_err(usbatm, "FirmwarePllFClkValue failed: %d\n", ret);
1001 return;
1002 }
1003
1004 /* FirmwarePllBClkValue */
1005 val = cpu_to_le32(instance->modem_type->pll_b_clk);
1006 ret = cxacru_fw(usb_dev, FW_WRITE_MEM, 0x2, 0x0, PLLBCLK_ADDR, (u8 *) &val, 4);
1007 if (ret) {
1008 usb_err(usbatm, "FirmwarePllBClkValue failed: %d\n", ret);
1009 return;
1010 }
1011
1012 /* Enable SDRAM */
1013 val = cpu_to_le32(SDRAM_ENA);
1014 ret = cxacru_fw(usb_dev, FW_WRITE_MEM, 0x2, 0x0, SDRAMEN_ADDR, (u8 *) &val, 4);
1015 if (ret) {
1016 usb_err(usbatm, "Enable SDRAM failed: %d\n", ret);
1017 return;
1018 }
1019
1020 /* Firmware */
1021 usb_info(usbatm, "loading firmware\n");
1022 ret = cxacru_fw(usb_dev, FW_WRITE_MEM, 0x2, 0x0, FW_ADDR, fw->data, fw->size);
1023 if (ret) {
1024 usb_err(usbatm, "Firmware upload failed: %d\n", ret);
1025 return;
1026 }
1027
1028 /* Boot ROM patch */
1029 if (instance->modem_type->boot_rom_patch) {
1030 usb_info(usbatm, "loading boot ROM patch\n");
1031 ret = cxacru_fw(usb_dev, FW_WRITE_MEM, 0x2, 0x0, BR_ADDR, bp->data, bp->size);
1032 if (ret) {
1033 usb_err(usbatm, "Boot ROM patching failed: %d\n", ret);
1034 return;
1035 }
1036 }
1037
1038 /* Signature */
1039 ret = cxacru_fw(usb_dev, FW_WRITE_MEM, 0x2, 0x0, SIG_ADDR, (u8 *) signature, 4);
1040 if (ret) {
1041 usb_err(usbatm, "Signature storing failed: %d\n", ret);
1042 return;
1043 }
1044
1045 usb_info(usbatm, "starting device\n");
1046 if (instance->modem_type->boot_rom_patch) {
1047 val = cpu_to_le32(BR_ADDR);
1048 ret = cxacru_fw(usb_dev, FW_WRITE_MEM, 0x2, 0x0, BR_STACK_ADDR, (u8 *) &val, 4);
1049 } else {
1050 ret = cxacru_fw(usb_dev, FW_GOTO_MEM, 0x0, 0x0, FW_ADDR, NULL, 0);
1051 }
1052 if (ret) {
1053 usb_err(usbatm, "Passing control to firmware failed: %d\n", ret);
1054 return;
1055 }
1056
1057 /* Delay to allow firmware to start up. */
1058 msleep_interruptible(1000);
1059
1060 usb_clear_halt(usb_dev, usb_sndbulkpipe(usb_dev, CXACRU_EP_CMD));
1061 usb_clear_halt(usb_dev, usb_rcvbulkpipe(usb_dev, CXACRU_EP_CMD));
1062 usb_clear_halt(usb_dev, usb_sndbulkpipe(usb_dev, CXACRU_EP_DATA));
1063 usb_clear_halt(usb_dev, usb_rcvbulkpipe(usb_dev, CXACRU_EP_DATA));
1064
1065 ret = cxacru_cm(instance, CM_REQUEST_CARD_GET_STATUS, NULL, 0, NULL, 0);
1066 if (ret < 0) {
1067 usb_err(usbatm, "modem failed to initialize: %d\n", ret);
1068 return;
1069 }
1070}
1071
1072static int cxacru_find_firmware(struct cxacru_data *instance,
1073 char *phase, const struct firmware **fw_p)
1074{
1075 struct usbatm_data *usbatm = instance->usbatm;
1076 struct device *dev = &usbatm->usb_intf->dev;
1077 char buf[16];
1078
1079 sprintf(buf, "cxacru-%s.bin", phase);
1080 usb_dbg(usbatm, "cxacru_find_firmware: looking for %s\n", buf);
1081
1082 if (request_firmware(fw_p, buf, dev)) {
1083 usb_dbg(usbatm, "no stage %s firmware found\n", phase);
1084 return -ENOENT;
1085 }
1086
1087 usb_info(usbatm, "found firmware %s\n", buf);
1088
1089 return 0;
1090}
1091
1092static int cxacru_heavy_init(struct usbatm_data *usbatm_instance,
1093 struct usb_interface *usb_intf)
1094{
1095 const struct firmware *fw, *bp;
1096 struct cxacru_data *instance = usbatm_instance->driver_data;
1097 int ret = cxacru_find_firmware(instance, "fw", &fw);
1098
1099 if (ret) {
1100 usb_warn(usbatm_instance, "firmware (cxacru-fw.bin) unavailable (system misconfigured?)\n");
1101 return ret;
1102 }
1103
1104 if (instance->modem_type->boot_rom_patch) {
1105 ret = cxacru_find_firmware(instance, "bp", &bp);
1106 if (ret) {
1107 usb_warn(usbatm_instance, "boot ROM patch (cxacru-bp.bin) unavailable (system misconfigured?)\n");
1108 release_firmware(fw);
1109 return ret;
1110 }
1111 }
1112
1113 cxacru_upload_firmware(instance, fw, bp);
1114
1115 if (instance->modem_type->boot_rom_patch)
1116 release_firmware(bp);
1117 release_firmware(fw);
1118
1119 ret = cxacru_card_status(instance);
1120 if (ret)
1121 usb_dbg(usbatm_instance, "modem initialisation failed\n");
1122 else
1123 usb_dbg(usbatm_instance, "done setting up the modem\n");
1124
1125 return ret;
1126}
1127
1128static int cxacru_bind(struct usbatm_data *usbatm_instance,
1129 struct usb_interface *intf, const struct usb_device_id *id)
1130{
1131 struct cxacru_data *instance;
1132 struct usb_device *usb_dev = interface_to_usbdev(intf);
1133 struct usb_host_endpoint *cmd_ep = usb_dev->ep_in[CXACRU_EP_CMD];
1134 int ret;
1135
1136 /* instance init */
1137 instance = kzalloc(sizeof(*instance), GFP_KERNEL);
1138 if (!instance)
1139 return -ENOMEM;
1140
1141 instance->usbatm = usbatm_instance;
1142 instance->modem_type = (struct cxacru_modem_type *) id->driver_info;
1143
1144 mutex_init(&instance->poll_state_serialize);
1145 instance->poll_state = CXPOLL_STOPPED;
1146 instance->line_status = -1;
1147 instance->adsl_status = -1;
1148
1149 mutex_init(&instance->adsl_state_serialize);
1150
1151 instance->rcv_buf = (u8 *) __get_free_page(GFP_KERNEL);
1152 if (!instance->rcv_buf) {
1153 usb_dbg(usbatm_instance, "cxacru_bind: no memory for rcv_buf\n");
1154 ret = -ENOMEM;
1155 goto fail;
1156 }
1157 instance->snd_buf = (u8 *) __get_free_page(GFP_KERNEL);
1158 if (!instance->snd_buf) {
1159 usb_dbg(usbatm_instance, "cxacru_bind: no memory for snd_buf\n");
1160 ret = -ENOMEM;
1161 goto fail;
1162 }
1163 instance->rcv_urb = usb_alloc_urb(0, GFP_KERNEL);
1164 if (!instance->rcv_urb) {
1165 ret = -ENOMEM;
1166 goto fail;
1167 }
1168 instance->snd_urb = usb_alloc_urb(0, GFP_KERNEL);
1169 if (!instance->snd_urb) {
1170 ret = -ENOMEM;
1171 goto fail;
1172 }
1173
1174 if (!cmd_ep) {
1175 usb_dbg(usbatm_instance, "cxacru_bind: no command endpoint\n");
1176 ret = -ENODEV;
1177 goto fail;
1178 }
1179
1180 if ((cmd_ep->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
1181 == USB_ENDPOINT_XFER_INT) {
1182 usb_fill_int_urb(instance->rcv_urb,
1183 usb_dev, usb_rcvintpipe(usb_dev, CXACRU_EP_CMD),
1184 instance->rcv_buf, PAGE_SIZE,
1185 cxacru_blocking_completion, &instance->rcv_done, 1);
1186
1187 usb_fill_int_urb(instance->snd_urb,
1188 usb_dev, usb_sndintpipe(usb_dev, CXACRU_EP_CMD),
1189 instance->snd_buf, PAGE_SIZE,
1190 cxacru_blocking_completion, &instance->snd_done, 4);
1191 } else {
1192 usb_fill_bulk_urb(instance->rcv_urb,
1193 usb_dev, usb_rcvbulkpipe(usb_dev, CXACRU_EP_CMD),
1194 instance->rcv_buf, PAGE_SIZE,
1195 cxacru_blocking_completion, &instance->rcv_done);
1196
1197 usb_fill_bulk_urb(instance->snd_urb,
1198 usb_dev, usb_sndbulkpipe(usb_dev, CXACRU_EP_CMD),
1199 instance->snd_buf, PAGE_SIZE,
1200 cxacru_blocking_completion, &instance->snd_done);
1201 }
1202
1203 mutex_init(&instance->cm_serialize);
1204
1205 INIT_DELAYED_WORK(&instance->poll_work, cxacru_poll_status);
1206
1207 usbatm_instance->driver_data = instance;
1208
1209 usbatm_instance->flags = (cxacru_card_status(instance) ? 0 : UDSL_SKIP_HEAVY_INIT);
1210
1211 return 0;
1212
1213 fail:
1214 free_page((unsigned long) instance->snd_buf);
1215 free_page((unsigned long) instance->rcv_buf);
1216 usb_free_urb(instance->snd_urb);
1217 usb_free_urb(instance->rcv_urb);
1218 kfree(instance);
1219
1220 return ret;
1221}
1222
1223static void cxacru_unbind(struct usbatm_data *usbatm_instance,
1224 struct usb_interface *intf)
1225{
1226 struct cxacru_data *instance = usbatm_instance->driver_data;
1227 int is_polling = 1;
1228
1229 usb_dbg(usbatm_instance, "cxacru_unbind entered\n");
1230
1231 if (!instance) {
1232 usb_dbg(usbatm_instance, "cxacru_unbind: NULL instance!\n");
1233 return;
1234 }
1235
1236 mutex_lock(&instance->poll_state_serialize);
1237 BUG_ON(instance->poll_state == CXPOLL_SHUTDOWN);
1238
1239 /* ensure that status polling continues unless
1240 * it has already stopped */
1241 if (instance->poll_state == CXPOLL_STOPPED)
1242 is_polling = 0;
1243
1244 /* stop polling from being stopped or started */
1245 instance->poll_state = CXPOLL_SHUTDOWN;
1246 mutex_unlock(&instance->poll_state_serialize);
1247
1248 if (is_polling)
1249 cancel_delayed_work_sync(&instance->poll_work);
1250
1251 usb_kill_urb(instance->snd_urb);
1252 usb_kill_urb(instance->rcv_urb);
1253 usb_free_urb(instance->snd_urb);
1254 usb_free_urb(instance->rcv_urb);
1255
1256 free_page((unsigned long) instance->snd_buf);
1257 free_page((unsigned long) instance->rcv_buf);
1258
1259 kfree(instance);
1260
1261 usbatm_instance->driver_data = NULL;
1262}
1263
1264static const struct cxacru_modem_type cxacru_cafe = {
1265 .pll_f_clk = 0x02d874df,
1266 .pll_b_clk = 0x0196a51a,
1267 .boot_rom_patch = 1,
1268};
1269
1270static const struct cxacru_modem_type cxacru_cb00 = {
1271 .pll_f_clk = 0x5,
1272 .pll_b_clk = 0x3,
1273 .boot_rom_patch = 0,
1274};
1275
1276static const struct usb_device_id cxacru_usb_ids[] = {
1277 { /* V = Conexant P = ADSL modem (Euphrates project) */
1278 USB_DEVICE(0x0572, 0xcafe), .driver_info = (unsigned long) &cxacru_cafe
1279 },
1280 { /* V = Conexant P = ADSL modem (Hasbani project) */
1281 USB_DEVICE(0x0572, 0xcb00), .driver_info = (unsigned long) &cxacru_cb00
1282 },
1283 { /* V = Conexant P = ADSL modem */
1284 USB_DEVICE(0x0572, 0xcb01), .driver_info = (unsigned long) &cxacru_cb00
1285 },
1286 { /* V = Conexant P = ADSL modem (Well PTI-800) */
1287 USB_DEVICE(0x0572, 0xcb02), .driver_info = (unsigned long) &cxacru_cb00
1288 },
1289 { /* V = Conexant P = ADSL modem */
1290 USB_DEVICE(0x0572, 0xcb06), .driver_info = (unsigned long) &cxacru_cb00
1291 },
1292 { /* V = Conexant P = ADSL modem (ZTE ZXDSL 852) */
1293 USB_DEVICE(0x0572, 0xcb07), .driver_info = (unsigned long) &cxacru_cb00
1294 },
1295 { /* V = Olitec P = ADSL modem version 2 */
1296 USB_DEVICE(0x08e3, 0x0100), .driver_info = (unsigned long) &cxacru_cafe
1297 },
1298 { /* V = Olitec P = ADSL modem version 3 */
1299 USB_DEVICE(0x08e3, 0x0102), .driver_info = (unsigned long) &cxacru_cb00
1300 },
1301 { /* V = Trust/Amigo Technology Co. P = AMX-CA86U */
1302 USB_DEVICE(0x0eb0, 0x3457), .driver_info = (unsigned long) &cxacru_cafe
1303 },
1304 { /* V = Zoom P = 5510 */
1305 USB_DEVICE(0x1803, 0x5510), .driver_info = (unsigned long) &cxacru_cb00
1306 },
1307 { /* V = Draytek P = Vigor 318 */
1308 USB_DEVICE(0x0675, 0x0200), .driver_info = (unsigned long) &cxacru_cb00
1309 },
1310 { /* V = Zyxel P = 630-C1 aka OMNI ADSL USB (Annex A) */
1311 USB_DEVICE(0x0586, 0x330a), .driver_info = (unsigned long) &cxacru_cb00
1312 },
1313 { /* V = Zyxel P = 630-C3 aka OMNI ADSL USB (Annex B) */
1314 USB_DEVICE(0x0586, 0x330b), .driver_info = (unsigned long) &cxacru_cb00
1315 },
1316 { /* V = Aethra P = Starmodem UM1020 */
1317 USB_DEVICE(0x0659, 0x0020), .driver_info = (unsigned long) &cxacru_cb00
1318 },
1319 { /* V = Aztech Systems P = ? AKA Pirelli AUA-010 */
1320 USB_DEVICE(0x0509, 0x0812), .driver_info = (unsigned long) &cxacru_cb00
1321 },
1322 { /* V = Netopia P = Cayman 3341(Annex A)/3351(Annex B) */
1323 USB_DEVICE(0x100d, 0xcb01), .driver_info = (unsigned long) &cxacru_cb00
1324 },
1325 { /* V = Netopia P = Cayman 3342(Annex A)/3352(Annex B) */
1326 USB_DEVICE(0x100d, 0x3342), .driver_info = (unsigned long) &cxacru_cb00
1327 },
1328 {}
1329};
1330
1331MODULE_DEVICE_TABLE(usb, cxacru_usb_ids);
1332
1333static struct usbatm_driver cxacru_driver = {
1334 .driver_name = cxacru_driver_name,
1335 .bind = cxacru_bind,
1336 .heavy_init = cxacru_heavy_init,
1337 .unbind = cxacru_unbind,
1338 .atm_start = cxacru_atm_start,
1339 .bulk_in = CXACRU_EP_DATA,
1340 .bulk_out = CXACRU_EP_DATA,
1341 .rx_padding = 3,
1342 .tx_padding = 11,
1343};
1344
1345static int cxacru_usb_probe(struct usb_interface *intf,
1346 const struct usb_device_id *id)
1347{
1348 struct usb_device *usb_dev = interface_to_usbdev(intf);
1349 char buf[15];
1350
1351 /* Avoid ADSL routers (cx82310_eth).
1352 * Abort if bDeviceClass is 0xff and iProduct is "USB NET CARD".
1353 */
1354 if (usb_dev->descriptor.bDeviceClass == USB_CLASS_VENDOR_SPEC
1355 && usb_string(usb_dev, usb_dev->descriptor.iProduct,
1356 buf, sizeof(buf)) > 0) {
1357 if (!strcmp(buf, "USB NET CARD")) {
1358 dev_info(&intf->dev, "ignoring cx82310_eth device\n");
1359 return -ENODEV;
1360 }
1361 }
1362
1363 return usbatm_usb_probe(intf, id, &cxacru_driver);
1364}
1365
1366static struct usb_driver cxacru_usb_driver = {
1367 .name = cxacru_driver_name,
1368 .probe = cxacru_usb_probe,
1369 .disconnect = usbatm_usb_disconnect,
1370 .id_table = cxacru_usb_ids,
1371 .dev_groups = cxacru_groups,
1372};
1373
1374module_usb_driver(cxacru_usb_driver);
1375
1376MODULE_AUTHOR(DRIVER_AUTHOR);
1377MODULE_DESCRIPTION(DRIVER_DESC);
1378MODULE_LICENSE("GPL");
1// SPDX-License-Identifier: GPL-2.0+
2/******************************************************************************
3 * cxacru.c - driver for USB ADSL modems based on
4 * Conexant AccessRunner chipset
5 *
6 * Copyright (C) 2004 David Woodhouse, Duncan Sands, Roman Kagan
7 * Copyright (C) 2005 Duncan Sands, Roman Kagan (rkagan % mail ! ru)
8 * Copyright (C) 2007 Simon Arlott
9 * Copyright (C) 2009 Simon Arlott
10 ******************************************************************************/
11
12/*
13 * Credit is due for Josep Comas, who created the original patch to speedtch.c
14 * to support the different padding used by the AccessRunner (now generalized
15 * into usbatm), and the userspace firmware loading utility.
16 */
17
18#include <linux/module.h>
19#include <linux/moduleparam.h>
20#include <linux/kernel.h>
21#include <linux/timer.h>
22#include <linux/errno.h>
23#include <linux/slab.h>
24#include <linux/device.h>
25#include <linux/firmware.h>
26#include <linux/mutex.h>
27#include <asm/unaligned.h>
28
29#include "usbatm.h"
30
31#define DRIVER_AUTHOR "Roman Kagan, David Woodhouse, Duncan Sands, Simon Arlott"
32#define DRIVER_DESC "Conexant AccessRunner ADSL USB modem driver"
33
34static const char cxacru_driver_name[] = "cxacru";
35
36#define CXACRU_EP_CMD 0x01 /* Bulk/interrupt in/out */
37#define CXACRU_EP_DATA 0x02 /* Bulk in/out */
38
39#define CMD_PACKET_SIZE 64 /* Should be maxpacket(ep)? */
40#define CMD_MAX_CONFIG ((CMD_PACKET_SIZE / 4 - 1) / 2)
41
42/* Addresses */
43#define PLLFCLK_ADDR 0x00350068
44#define PLLBCLK_ADDR 0x0035006c
45#define SDRAMEN_ADDR 0x00350010
46#define FW_ADDR 0x00801000
47#define BR_ADDR 0x00180600
48#define SIG_ADDR 0x00180500
49#define BR_STACK_ADDR 0x00187f10
50
51/* Values */
52#define SDRAM_ENA 0x1
53
54#define CMD_TIMEOUT 2000 /* msecs */
55#define POLL_INTERVAL 1 /* secs */
56
57/* commands for interaction with the modem through the control channel before
58 * firmware is loaded */
59enum cxacru_fw_request {
60 FW_CMD_ERR,
61 FW_GET_VER,
62 FW_READ_MEM,
63 FW_WRITE_MEM,
64 FW_RMW_MEM,
65 FW_CHECKSUM_MEM,
66 FW_GOTO_MEM,
67};
68
69/* commands for interaction with the modem through the control channel once
70 * firmware is loaded */
71enum cxacru_cm_request {
72 CM_REQUEST_UNDEFINED = 0x80,
73 CM_REQUEST_TEST,
74 CM_REQUEST_CHIP_GET_MAC_ADDRESS,
75 CM_REQUEST_CHIP_GET_DP_VERSIONS,
76 CM_REQUEST_CHIP_ADSL_LINE_START,
77 CM_REQUEST_CHIP_ADSL_LINE_STOP,
78 CM_REQUEST_CHIP_ADSL_LINE_GET_STATUS,
79 CM_REQUEST_CHIP_ADSL_LINE_GET_SPEED,
80 CM_REQUEST_CARD_INFO_GET,
81 CM_REQUEST_CARD_DATA_GET,
82 CM_REQUEST_CARD_DATA_SET,
83 CM_REQUEST_COMMAND_HW_IO,
84 CM_REQUEST_INTERFACE_HW_IO,
85 CM_REQUEST_CARD_SERIAL_DATA_PATH_GET,
86 CM_REQUEST_CARD_SERIAL_DATA_PATH_SET,
87 CM_REQUEST_CARD_CONTROLLER_VERSION_GET,
88 CM_REQUEST_CARD_GET_STATUS,
89 CM_REQUEST_CARD_GET_MAC_ADDRESS,
90 CM_REQUEST_CARD_GET_DATA_LINK_STATUS,
91 CM_REQUEST_MAX,
92};
93
94/* commands for interaction with the flash memory
95 *
96 * read: response is the contents of the first 60 bytes of flash memory
97 * write: request contains the 60 bytes of data to write to flash memory
98 * response is the contents of the first 60 bytes of flash memory
99 *
100 * layout: PP PP VV VV MM MM MM MM MM MM ?? ?? SS SS SS SS SS SS SS SS
101 * SS SS SS SS SS SS SS SS 00 00 00 00 00 00 00 00 00 00 00 00
102 * 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
103 *
104 * P: le16 USB Product ID
105 * V: le16 USB Vendor ID
106 * M: be48 MAC Address
107 * S: le16 ASCII Serial Number
108 */
109enum cxacru_cm_flash {
110 CM_FLASH_READ = 0xa1,
111 CM_FLASH_WRITE = 0xa2
112};
113
114/* reply codes to the commands above */
115enum cxacru_cm_status {
116 CM_STATUS_UNDEFINED,
117 CM_STATUS_SUCCESS,
118 CM_STATUS_ERROR,
119 CM_STATUS_UNSUPPORTED,
120 CM_STATUS_UNIMPLEMENTED,
121 CM_STATUS_PARAMETER_ERROR,
122 CM_STATUS_DBG_LOOPBACK,
123 CM_STATUS_MAX,
124};
125
126/* indices into CARD_INFO_GET return array */
127enum cxacru_info_idx {
128 CXINF_DOWNSTREAM_RATE,
129 CXINF_UPSTREAM_RATE,
130 CXINF_LINK_STATUS,
131 CXINF_LINE_STATUS,
132 CXINF_MAC_ADDRESS_HIGH,
133 CXINF_MAC_ADDRESS_LOW,
134 CXINF_UPSTREAM_SNR_MARGIN,
135 CXINF_DOWNSTREAM_SNR_MARGIN,
136 CXINF_UPSTREAM_ATTENUATION,
137 CXINF_DOWNSTREAM_ATTENUATION,
138 CXINF_TRANSMITTER_POWER,
139 CXINF_UPSTREAM_BITS_PER_FRAME,
140 CXINF_DOWNSTREAM_BITS_PER_FRAME,
141 CXINF_STARTUP_ATTEMPTS,
142 CXINF_UPSTREAM_CRC_ERRORS,
143 CXINF_DOWNSTREAM_CRC_ERRORS,
144 CXINF_UPSTREAM_FEC_ERRORS,
145 CXINF_DOWNSTREAM_FEC_ERRORS,
146 CXINF_UPSTREAM_HEC_ERRORS,
147 CXINF_DOWNSTREAM_HEC_ERRORS,
148 CXINF_LINE_STARTABLE,
149 CXINF_MODULATION,
150 CXINF_ADSL_HEADEND,
151 CXINF_ADSL_HEADEND_ENVIRONMENT,
152 CXINF_CONTROLLER_VERSION,
153 /* dunno what the missing two mean */
154 CXINF_MAX = 0x1c,
155};
156
157enum cxacru_poll_state {
158 CXPOLL_STOPPING,
159 CXPOLL_STOPPED,
160 CXPOLL_POLLING,
161 CXPOLL_SHUTDOWN
162};
163
164struct cxacru_modem_type {
165 u32 pll_f_clk;
166 u32 pll_b_clk;
167 int boot_rom_patch;
168};
169
170struct cxacru_data {
171 struct usbatm_data *usbatm;
172
173 const struct cxacru_modem_type *modem_type;
174
175 int line_status;
176 struct mutex adsl_state_serialize;
177 int adsl_status;
178 struct delayed_work poll_work;
179 u32 card_info[CXINF_MAX];
180 struct mutex poll_state_serialize;
181 enum cxacru_poll_state poll_state;
182
183 /* contol handles */
184 struct mutex cm_serialize;
185 u8 *rcv_buf;
186 u8 *snd_buf;
187 struct urb *rcv_urb;
188 struct urb *snd_urb;
189 struct completion rcv_done;
190 struct completion snd_done;
191};
192
193static int cxacru_cm(struct cxacru_data *instance, enum cxacru_cm_request cm,
194 u8 *wdata, int wsize, u8 *rdata, int rsize);
195static void cxacru_poll_status(struct work_struct *work);
196
197/* Card info exported through sysfs */
198#define CXACRU__ATTR_INIT(_name) \
199static DEVICE_ATTR_RO(_name)
200
201#define CXACRU_CMD_INIT(_name) \
202static DEVICE_ATTR_RW(_name)
203
204#define CXACRU_SET_INIT(_name) \
205static DEVICE_ATTR_WO(_name)
206
207#define CXACRU_ATTR_INIT(_value, _type, _name) \
208static ssize_t _name##_show(struct device *dev, \
209 struct device_attribute *attr, char *buf) \
210{ \
211 struct cxacru_data *instance = to_usbatm_driver_data(\
212 to_usb_interface(dev)); \
213\
214 if (instance == NULL) \
215 return -ENODEV; \
216\
217 return cxacru_sysfs_showattr_##_type(instance->card_info[_value], buf); \
218} \
219CXACRU__ATTR_INIT(_name)
220
221#define CXACRU_ATTR_CREATE(_v, _t, _name) CXACRU_DEVICE_CREATE_FILE(_name)
222#define CXACRU_CMD_CREATE(_name) CXACRU_DEVICE_CREATE_FILE(_name)
223#define CXACRU_SET_CREATE(_name) CXACRU_DEVICE_CREATE_FILE(_name)
224#define CXACRU__ATTR_CREATE(_name) CXACRU_DEVICE_CREATE_FILE(_name)
225
226#define CXACRU_ATTR_REMOVE(_v, _t, _name) CXACRU_DEVICE_REMOVE_FILE(_name)
227#define CXACRU_CMD_REMOVE(_name) CXACRU_DEVICE_REMOVE_FILE(_name)
228#define CXACRU_SET_REMOVE(_name) CXACRU_DEVICE_REMOVE_FILE(_name)
229#define CXACRU__ATTR_REMOVE(_name) CXACRU_DEVICE_REMOVE_FILE(_name)
230
231static ssize_t cxacru_sysfs_showattr_u32(u32 value, char *buf)
232{
233 return snprintf(buf, PAGE_SIZE, "%u\n", value);
234}
235
236static ssize_t cxacru_sysfs_showattr_s8(s8 value, char *buf)
237{
238 return snprintf(buf, PAGE_SIZE, "%d\n", value);
239}
240
241static ssize_t cxacru_sysfs_showattr_dB(s16 value, char *buf)
242{
243 if (likely(value >= 0)) {
244 return snprintf(buf, PAGE_SIZE, "%u.%02u\n",
245 value / 100, value % 100);
246 } else {
247 value = -value;
248 return snprintf(buf, PAGE_SIZE, "-%u.%02u\n",
249 value / 100, value % 100);
250 }
251}
252
253static ssize_t cxacru_sysfs_showattr_bool(u32 value, char *buf)
254{
255 static char *str[] = { "no", "yes" };
256
257 if (unlikely(value >= ARRAY_SIZE(str)))
258 return snprintf(buf, PAGE_SIZE, "%u\n", value);
259 return snprintf(buf, PAGE_SIZE, "%s\n", str[value]);
260}
261
262static ssize_t cxacru_sysfs_showattr_LINK(u32 value, char *buf)
263{
264 static char *str[] = { NULL, "not connected", "connected", "lost" };
265
266 if (unlikely(value >= ARRAY_SIZE(str) || str[value] == NULL))
267 return snprintf(buf, PAGE_SIZE, "%u\n", value);
268 return snprintf(buf, PAGE_SIZE, "%s\n", str[value]);
269}
270
271static ssize_t cxacru_sysfs_showattr_LINE(u32 value, char *buf)
272{
273 static char *str[] = { "down", "attempting to activate",
274 "training", "channel analysis", "exchange", "up",
275 "waiting", "initialising"
276 };
277 if (unlikely(value >= ARRAY_SIZE(str)))
278 return snprintf(buf, PAGE_SIZE, "%u\n", value);
279 return snprintf(buf, PAGE_SIZE, "%s\n", str[value]);
280}
281
282static ssize_t cxacru_sysfs_showattr_MODU(u32 value, char *buf)
283{
284 static char *str[] = {
285 "",
286 "ANSI T1.413",
287 "ITU-T G.992.1 (G.DMT)",
288 "ITU-T G.992.2 (G.LITE)"
289 };
290 if (unlikely(value >= ARRAY_SIZE(str)))
291 return snprintf(buf, PAGE_SIZE, "%u\n", value);
292 return snprintf(buf, PAGE_SIZE, "%s\n", str[value]);
293}
294
295/*
296 * This could use MAC_ADDRESS_HIGH and MAC_ADDRESS_LOW, but since
297 * this data is already in atm_dev there's no point.
298 *
299 * MAC_ADDRESS_HIGH = 0x????5544
300 * MAC_ADDRESS_LOW = 0x33221100
301 * Where 00-55 are bytes 0-5 of the MAC.
302 */
303static ssize_t mac_address_show(struct device *dev,
304 struct device_attribute *attr, char *buf)
305{
306 struct cxacru_data *instance = to_usbatm_driver_data(
307 to_usb_interface(dev));
308
309 if (instance == NULL || instance->usbatm->atm_dev == NULL)
310 return -ENODEV;
311
312 return snprintf(buf, PAGE_SIZE, "%pM\n",
313 instance->usbatm->atm_dev->esi);
314}
315
316static ssize_t adsl_state_show(struct device *dev,
317 struct device_attribute *attr, char *buf)
318{
319 static char *str[] = { "running", "stopped" };
320 struct cxacru_data *instance = to_usbatm_driver_data(
321 to_usb_interface(dev));
322 u32 value;
323
324 if (instance == NULL)
325 return -ENODEV;
326
327 value = instance->card_info[CXINF_LINE_STARTABLE];
328 if (unlikely(value >= ARRAY_SIZE(str)))
329 return snprintf(buf, PAGE_SIZE, "%u\n", value);
330 return snprintf(buf, PAGE_SIZE, "%s\n", str[value]);
331}
332
333static ssize_t adsl_state_store(struct device *dev,
334 struct device_attribute *attr, const char *buf, size_t count)
335{
336 struct cxacru_data *instance = to_usbatm_driver_data(
337 to_usb_interface(dev));
338 int ret;
339 int poll = -1;
340 char str_cmd[8];
341 int len = strlen(buf);
342
343 if (!capable(CAP_NET_ADMIN))
344 return -EACCES;
345
346 ret = sscanf(buf, "%7s", str_cmd);
347 if (ret != 1)
348 return -EINVAL;
349 ret = 0;
350
351 if (instance == NULL)
352 return -ENODEV;
353
354 if (mutex_lock_interruptible(&instance->adsl_state_serialize))
355 return -ERESTARTSYS;
356
357 if (!strcmp(str_cmd, "stop") || !strcmp(str_cmd, "restart")) {
358 ret = cxacru_cm(instance, CM_REQUEST_CHIP_ADSL_LINE_STOP, NULL, 0, NULL, 0);
359 if (ret < 0) {
360 atm_err(instance->usbatm, "change adsl state:"
361 " CHIP_ADSL_LINE_STOP returned %d\n", ret);
362
363 ret = -EIO;
364 } else {
365 ret = len;
366 poll = CXPOLL_STOPPED;
367 }
368 }
369
370 /* Line status is only updated every second
371 * and the device appears to only react to
372 * START/STOP every second too. Wait 1.5s to
373 * be sure that restart will have an effect. */
374 if (!strcmp(str_cmd, "restart"))
375 msleep(1500);
376
377 if (!strcmp(str_cmd, "start") || !strcmp(str_cmd, "restart")) {
378 ret = cxacru_cm(instance, CM_REQUEST_CHIP_ADSL_LINE_START, NULL, 0, NULL, 0);
379 if (ret < 0) {
380 atm_err(instance->usbatm, "change adsl state:"
381 " CHIP_ADSL_LINE_START returned %d\n", ret);
382
383 ret = -EIO;
384 } else {
385 ret = len;
386 poll = CXPOLL_POLLING;
387 }
388 }
389
390 if (!strcmp(str_cmd, "poll")) {
391 ret = len;
392 poll = CXPOLL_POLLING;
393 }
394
395 if (ret == 0) {
396 ret = -EINVAL;
397 poll = -1;
398 }
399
400 if (poll == CXPOLL_POLLING) {
401 mutex_lock(&instance->poll_state_serialize);
402 switch (instance->poll_state) {
403 case CXPOLL_STOPPED:
404 /* start polling */
405 instance->poll_state = CXPOLL_POLLING;
406 break;
407
408 case CXPOLL_STOPPING:
409 /* abort stop request */
410 instance->poll_state = CXPOLL_POLLING;
411 /* fall through */
412 case CXPOLL_POLLING:
413 case CXPOLL_SHUTDOWN:
414 /* don't start polling */
415 poll = -1;
416 }
417 mutex_unlock(&instance->poll_state_serialize);
418 } else if (poll == CXPOLL_STOPPED) {
419 mutex_lock(&instance->poll_state_serialize);
420 /* request stop */
421 if (instance->poll_state == CXPOLL_POLLING)
422 instance->poll_state = CXPOLL_STOPPING;
423 mutex_unlock(&instance->poll_state_serialize);
424 }
425
426 mutex_unlock(&instance->adsl_state_serialize);
427
428 if (poll == CXPOLL_POLLING)
429 cxacru_poll_status(&instance->poll_work.work);
430
431 return ret;
432}
433
434/* CM_REQUEST_CARD_DATA_GET times out, so no show attribute */
435
436static ssize_t adsl_config_store(struct device *dev,
437 struct device_attribute *attr, const char *buf, size_t count)
438{
439 struct cxacru_data *instance = to_usbatm_driver_data(
440 to_usb_interface(dev));
441 int len = strlen(buf);
442 int ret, pos, num;
443 __le32 data[CMD_PACKET_SIZE / 4];
444
445 if (!capable(CAP_NET_ADMIN))
446 return -EACCES;
447
448 if (instance == NULL)
449 return -ENODEV;
450
451 pos = 0;
452 num = 0;
453 while (pos < len) {
454 int tmp;
455 u32 index;
456 u32 value;
457
458 ret = sscanf(buf + pos, "%x=%x%n", &index, &value, &tmp);
459 if (ret < 2)
460 return -EINVAL;
461 if (index > 0x7f)
462 return -EINVAL;
463 if (tmp < 0 || tmp > len - pos)
464 return -EINVAL;
465 pos += tmp;
466
467 /* skip trailing newline */
468 if (buf[pos] == '\n' && pos == len-1)
469 pos++;
470
471 data[num * 2 + 1] = cpu_to_le32(index);
472 data[num * 2 + 2] = cpu_to_le32(value);
473 num++;
474
475 /* send config values when data buffer is full
476 * or no more data
477 */
478 if (pos >= len || num >= CMD_MAX_CONFIG) {
479 char log[CMD_MAX_CONFIG * 12 + 1]; /* %02x=%08x */
480
481 data[0] = cpu_to_le32(num);
482 ret = cxacru_cm(instance, CM_REQUEST_CARD_DATA_SET,
483 (u8 *) data, 4 + num * 8, NULL, 0);
484 if (ret < 0) {
485 atm_err(instance->usbatm,
486 "set card data returned %d\n", ret);
487 return -EIO;
488 }
489
490 for (tmp = 0; tmp < num; tmp++)
491 snprintf(log + tmp*12, 13, " %02x=%08x",
492 le32_to_cpu(data[tmp * 2 + 1]),
493 le32_to_cpu(data[tmp * 2 + 2]));
494 atm_info(instance->usbatm, "config%s\n", log);
495 num = 0;
496 }
497 }
498
499 return len;
500}
501
502/*
503 * All device attributes are included in CXACRU_ALL_FILES
504 * so that the same list can be used multiple times:
505 * INIT (define the device attributes)
506 * CREATE (create all the device files)
507 * REMOVE (remove all the device files)
508 *
509 * With the last two being defined as needed in the functions
510 * they are used in before calling CXACRU_ALL_FILES()
511 */
512#define CXACRU_ALL_FILES(_action) \
513CXACRU_ATTR_##_action(CXINF_DOWNSTREAM_RATE, u32, downstream_rate); \
514CXACRU_ATTR_##_action(CXINF_UPSTREAM_RATE, u32, upstream_rate); \
515CXACRU_ATTR_##_action(CXINF_LINK_STATUS, LINK, link_status); \
516CXACRU_ATTR_##_action(CXINF_LINE_STATUS, LINE, line_status); \
517CXACRU__ATTR_##_action( mac_address); \
518CXACRU_ATTR_##_action(CXINF_UPSTREAM_SNR_MARGIN, dB, upstream_snr_margin); \
519CXACRU_ATTR_##_action(CXINF_DOWNSTREAM_SNR_MARGIN, dB, downstream_snr_margin); \
520CXACRU_ATTR_##_action(CXINF_UPSTREAM_ATTENUATION, dB, upstream_attenuation); \
521CXACRU_ATTR_##_action(CXINF_DOWNSTREAM_ATTENUATION, dB, downstream_attenuation); \
522CXACRU_ATTR_##_action(CXINF_TRANSMITTER_POWER, s8, transmitter_power); \
523CXACRU_ATTR_##_action(CXINF_UPSTREAM_BITS_PER_FRAME, u32, upstream_bits_per_frame); \
524CXACRU_ATTR_##_action(CXINF_DOWNSTREAM_BITS_PER_FRAME, u32, downstream_bits_per_frame); \
525CXACRU_ATTR_##_action(CXINF_STARTUP_ATTEMPTS, u32, startup_attempts); \
526CXACRU_ATTR_##_action(CXINF_UPSTREAM_CRC_ERRORS, u32, upstream_crc_errors); \
527CXACRU_ATTR_##_action(CXINF_DOWNSTREAM_CRC_ERRORS, u32, downstream_crc_errors); \
528CXACRU_ATTR_##_action(CXINF_UPSTREAM_FEC_ERRORS, u32, upstream_fec_errors); \
529CXACRU_ATTR_##_action(CXINF_DOWNSTREAM_FEC_ERRORS, u32, downstream_fec_errors); \
530CXACRU_ATTR_##_action(CXINF_UPSTREAM_HEC_ERRORS, u32, upstream_hec_errors); \
531CXACRU_ATTR_##_action(CXINF_DOWNSTREAM_HEC_ERRORS, u32, downstream_hec_errors); \
532CXACRU_ATTR_##_action(CXINF_LINE_STARTABLE, bool, line_startable); \
533CXACRU_ATTR_##_action(CXINF_MODULATION, MODU, modulation); \
534CXACRU_ATTR_##_action(CXINF_ADSL_HEADEND, u32, adsl_headend); \
535CXACRU_ATTR_##_action(CXINF_ADSL_HEADEND_ENVIRONMENT, u32, adsl_headend_environment); \
536CXACRU_ATTR_##_action(CXINF_CONTROLLER_VERSION, u32, adsl_controller_version); \
537CXACRU_CMD_##_action( adsl_state); \
538CXACRU_SET_##_action( adsl_config);
539
540CXACRU_ALL_FILES(INIT);
541
542/* the following three functions are stolen from drivers/usb/core/message.c */
543static void cxacru_blocking_completion(struct urb *urb)
544{
545 complete(urb->context);
546}
547
548struct cxacru_timer {
549 struct timer_list timer;
550 struct urb *urb;
551};
552
553static void cxacru_timeout_kill(struct timer_list *t)
554{
555 struct cxacru_timer *timer = from_timer(timer, t, timer);
556
557 usb_unlink_urb(timer->urb);
558}
559
560static int cxacru_start_wait_urb(struct urb *urb, struct completion *done,
561 int *actual_length)
562{
563 struct cxacru_timer timer = {
564 .urb = urb,
565 };
566
567 timer_setup_on_stack(&timer.timer, cxacru_timeout_kill, 0);
568 mod_timer(&timer.timer, jiffies + msecs_to_jiffies(CMD_TIMEOUT));
569 wait_for_completion(done);
570 del_timer_sync(&timer.timer);
571 destroy_timer_on_stack(&timer.timer);
572
573 if (actual_length)
574 *actual_length = urb->actual_length;
575 return urb->status; /* must read status after completion */
576}
577
578static int cxacru_cm(struct cxacru_data *instance, enum cxacru_cm_request cm,
579 u8 *wdata, int wsize, u8 *rdata, int rsize)
580{
581 int ret, actlen;
582 int offb, offd;
583 const int stride = CMD_PACKET_SIZE - 4;
584 u8 *wbuf = instance->snd_buf;
585 u8 *rbuf = instance->rcv_buf;
586 int wbuflen = ((wsize - 1) / stride + 1) * CMD_PACKET_SIZE;
587 int rbuflen = ((rsize - 1) / stride + 1) * CMD_PACKET_SIZE;
588
589 if (wbuflen > PAGE_SIZE || rbuflen > PAGE_SIZE) {
590 if (printk_ratelimit())
591 usb_err(instance->usbatm, "requested transfer size too large (%d, %d)\n",
592 wbuflen, rbuflen);
593 ret = -ENOMEM;
594 goto err;
595 }
596
597 mutex_lock(&instance->cm_serialize);
598
599 /* submit reading urb before the writing one */
600 init_completion(&instance->rcv_done);
601 ret = usb_submit_urb(instance->rcv_urb, GFP_KERNEL);
602 if (ret < 0) {
603 if (printk_ratelimit())
604 usb_err(instance->usbatm, "submit of read urb for cm %#x failed (%d)\n",
605 cm, ret);
606 goto fail;
607 }
608
609 memset(wbuf, 0, wbuflen);
610 /* handle wsize == 0 */
611 wbuf[0] = cm;
612 for (offb = offd = 0; offd < wsize; offd += stride, offb += CMD_PACKET_SIZE) {
613 wbuf[offb] = cm;
614 memcpy(wbuf + offb + 4, wdata + offd, min_t(int, stride, wsize - offd));
615 }
616
617 instance->snd_urb->transfer_buffer_length = wbuflen;
618 init_completion(&instance->snd_done);
619 ret = usb_submit_urb(instance->snd_urb, GFP_KERNEL);
620 if (ret < 0) {
621 if (printk_ratelimit())
622 usb_err(instance->usbatm, "submit of write urb for cm %#x failed (%d)\n",
623 cm, ret);
624 goto fail;
625 }
626
627 ret = cxacru_start_wait_urb(instance->snd_urb, &instance->snd_done, NULL);
628 if (ret < 0) {
629 if (printk_ratelimit())
630 usb_err(instance->usbatm, "send of cm %#x failed (%d)\n", cm, ret);
631 goto fail;
632 }
633
634 ret = cxacru_start_wait_urb(instance->rcv_urb, &instance->rcv_done, &actlen);
635 if (ret < 0) {
636 if (printk_ratelimit())
637 usb_err(instance->usbatm, "receive of cm %#x failed (%d)\n", cm, ret);
638 goto fail;
639 }
640 if (actlen % CMD_PACKET_SIZE || !actlen) {
641 if (printk_ratelimit())
642 usb_err(instance->usbatm, "invalid response length to cm %#x: %d\n",
643 cm, actlen);
644 ret = -EIO;
645 goto fail;
646 }
647
648 /* check the return status and copy the data to the output buffer, if needed */
649 for (offb = offd = 0; offd < rsize && offb < actlen; offb += CMD_PACKET_SIZE) {
650 if (rbuf[offb] != cm) {
651 if (printk_ratelimit())
652 usb_err(instance->usbatm, "wrong cm %#x in response to cm %#x\n",
653 rbuf[offb], cm);
654 ret = -EIO;
655 goto fail;
656 }
657 if (rbuf[offb + 1] != CM_STATUS_SUCCESS) {
658 if (printk_ratelimit())
659 usb_err(instance->usbatm, "response to cm %#x failed: %#x\n",
660 cm, rbuf[offb + 1]);
661 ret = -EIO;
662 goto fail;
663 }
664 if (offd >= rsize)
665 break;
666 memcpy(rdata + offd, rbuf + offb + 4, min_t(int, stride, rsize - offd));
667 offd += stride;
668 }
669
670 ret = offd;
671 usb_dbg(instance->usbatm, "cm %#x\n", cm);
672fail:
673 mutex_unlock(&instance->cm_serialize);
674err:
675 return ret;
676}
677
678static int cxacru_cm_get_array(struct cxacru_data *instance, enum cxacru_cm_request cm,
679 u32 *data, int size)
680{
681 int ret, len;
682 __le32 *buf;
683 int offb;
684 unsigned int offd;
685 const int stride = CMD_PACKET_SIZE / (4 * 2) - 1;
686 int buflen = ((size - 1) / stride + 1 + size * 2) * 4;
687
688 buf = kmalloc(buflen, GFP_KERNEL);
689 if (!buf)
690 return -ENOMEM;
691
692 ret = cxacru_cm(instance, cm, NULL, 0, (u8 *) buf, buflen);
693 if (ret < 0)
694 goto cleanup;
695
696 /* len > 0 && len % 4 == 0 guaranteed by cxacru_cm() */
697 len = ret / 4;
698 for (offb = 0; offb < len; ) {
699 int l = le32_to_cpu(buf[offb++]);
700
701 if (l < 0 || l > stride || l > (len - offb) / 2) {
702 if (printk_ratelimit())
703 usb_err(instance->usbatm, "invalid data length from cm %#x: %d\n",
704 cm, l);
705 ret = -EIO;
706 goto cleanup;
707 }
708 while (l--) {
709 offd = le32_to_cpu(buf[offb++]);
710 if (offd >= size) {
711 if (printk_ratelimit())
712 usb_err(instance->usbatm, "wrong index %#x in response to cm %#x\n",
713 offd, cm);
714 ret = -EIO;
715 goto cleanup;
716 }
717 data[offd] = le32_to_cpu(buf[offb++]);
718 }
719 }
720
721 ret = 0;
722
723cleanup:
724 kfree(buf);
725 return ret;
726}
727
728static int cxacru_card_status(struct cxacru_data *instance)
729{
730 int ret = cxacru_cm(instance, CM_REQUEST_CARD_GET_STATUS, NULL, 0, NULL, 0);
731
732 if (ret < 0) { /* firmware not loaded */
733 usb_dbg(instance->usbatm, "cxacru_adsl_start: CARD_GET_STATUS returned %d\n", ret);
734 return ret;
735 }
736 return 0;
737}
738
739static void cxacru_remove_device_files(struct usbatm_data *usbatm_instance,
740 struct atm_dev *atm_dev)
741{
742 struct usb_interface *intf = usbatm_instance->usb_intf;
743
744 #define CXACRU_DEVICE_REMOVE_FILE(_name) \
745 device_remove_file(&intf->dev, &dev_attr_##_name);
746 CXACRU_ALL_FILES(REMOVE);
747 #undef CXACRU_DEVICE_REMOVE_FILE
748}
749
750static int cxacru_atm_start(struct usbatm_data *usbatm_instance,
751 struct atm_dev *atm_dev)
752{
753 struct cxacru_data *instance = usbatm_instance->driver_data;
754 struct usb_interface *intf = usbatm_instance->usb_intf;
755 int ret;
756 int start_polling = 1;
757
758 dev_dbg(&intf->dev, "%s\n", __func__);
759
760 /* Read MAC address */
761 ret = cxacru_cm(instance, CM_REQUEST_CARD_GET_MAC_ADDRESS, NULL, 0,
762 atm_dev->esi, sizeof(atm_dev->esi));
763 if (ret < 0) {
764 atm_err(usbatm_instance, "cxacru_atm_start: CARD_GET_MAC_ADDRESS returned %d\n", ret);
765 return ret;
766 }
767
768 #define CXACRU_DEVICE_CREATE_FILE(_name) \
769 ret = device_create_file(&intf->dev, &dev_attr_##_name); \
770 if (unlikely(ret)) \
771 goto fail_sysfs;
772 CXACRU_ALL_FILES(CREATE);
773 #undef CXACRU_DEVICE_CREATE_FILE
774
775 /* start ADSL */
776 mutex_lock(&instance->adsl_state_serialize);
777 ret = cxacru_cm(instance, CM_REQUEST_CHIP_ADSL_LINE_START, NULL, 0, NULL, 0);
778 if (ret < 0)
779 atm_err(usbatm_instance, "cxacru_atm_start: CHIP_ADSL_LINE_START returned %d\n", ret);
780
781 /* Start status polling */
782 mutex_lock(&instance->poll_state_serialize);
783 switch (instance->poll_state) {
784 case CXPOLL_STOPPED:
785 /* start polling */
786 instance->poll_state = CXPOLL_POLLING;
787 break;
788
789 case CXPOLL_STOPPING:
790 /* abort stop request */
791 instance->poll_state = CXPOLL_POLLING;
792 /* fall through */
793 case CXPOLL_POLLING:
794 case CXPOLL_SHUTDOWN:
795 /* don't start polling */
796 start_polling = 0;
797 }
798 mutex_unlock(&instance->poll_state_serialize);
799 mutex_unlock(&instance->adsl_state_serialize);
800
801 printk(KERN_INFO "%s%d: %s %pM\n", atm_dev->type, atm_dev->number,
802 usbatm_instance->description, atm_dev->esi);
803
804 if (start_polling)
805 cxacru_poll_status(&instance->poll_work.work);
806 return 0;
807
808fail_sysfs:
809 usb_err(usbatm_instance, "cxacru_atm_start: device_create_file failed (%d)\n", ret);
810 cxacru_remove_device_files(usbatm_instance, atm_dev);
811 return ret;
812}
813
814static void cxacru_poll_status(struct work_struct *work)
815{
816 struct cxacru_data *instance =
817 container_of(work, struct cxacru_data, poll_work.work);
818 u32 buf[CXINF_MAX] = {};
819 struct usbatm_data *usbatm = instance->usbatm;
820 struct atm_dev *atm_dev = usbatm->atm_dev;
821 int keep_polling = 1;
822 int ret;
823
824 ret = cxacru_cm_get_array(instance, CM_REQUEST_CARD_INFO_GET, buf, CXINF_MAX);
825 if (ret < 0) {
826 if (ret != -ESHUTDOWN)
827 atm_warn(usbatm, "poll status: error %d\n", ret);
828
829 mutex_lock(&instance->poll_state_serialize);
830 if (instance->poll_state != CXPOLL_SHUTDOWN) {
831 instance->poll_state = CXPOLL_STOPPED;
832
833 if (ret != -ESHUTDOWN)
834 atm_warn(usbatm, "polling disabled, set adsl_state"
835 " to 'start' or 'poll' to resume\n");
836 }
837 mutex_unlock(&instance->poll_state_serialize);
838 goto reschedule;
839 }
840
841 memcpy(instance->card_info, buf, sizeof(instance->card_info));
842
843 if (instance->adsl_status != buf[CXINF_LINE_STARTABLE]) {
844 instance->adsl_status = buf[CXINF_LINE_STARTABLE];
845
846 switch (instance->adsl_status) {
847 case 0:
848 atm_printk(KERN_INFO, usbatm, "ADSL state: running\n");
849 break;
850
851 case 1:
852 atm_printk(KERN_INFO, usbatm, "ADSL state: stopped\n");
853 break;
854
855 default:
856 atm_printk(KERN_INFO, usbatm, "Unknown adsl status %02x\n", instance->adsl_status);
857 break;
858 }
859 }
860
861 if (instance->line_status == buf[CXINF_LINE_STATUS])
862 goto reschedule;
863
864 instance->line_status = buf[CXINF_LINE_STATUS];
865 switch (instance->line_status) {
866 case 0:
867 atm_dev_signal_change(atm_dev, ATM_PHY_SIG_LOST);
868 atm_info(usbatm, "ADSL line: down\n");
869 break;
870
871 case 1:
872 atm_dev_signal_change(atm_dev, ATM_PHY_SIG_LOST);
873 atm_info(usbatm, "ADSL line: attempting to activate\n");
874 break;
875
876 case 2:
877 atm_dev_signal_change(atm_dev, ATM_PHY_SIG_LOST);
878 atm_info(usbatm, "ADSL line: training\n");
879 break;
880
881 case 3:
882 atm_dev_signal_change(atm_dev, ATM_PHY_SIG_LOST);
883 atm_info(usbatm, "ADSL line: channel analysis\n");
884 break;
885
886 case 4:
887 atm_dev_signal_change(atm_dev, ATM_PHY_SIG_LOST);
888 atm_info(usbatm, "ADSL line: exchange\n");
889 break;
890
891 case 5:
892 atm_dev->link_rate = buf[CXINF_DOWNSTREAM_RATE] * 1000 / 424;
893 atm_dev_signal_change(atm_dev, ATM_PHY_SIG_FOUND);
894
895 atm_info(usbatm, "ADSL line: up (%d kb/s down | %d kb/s up)\n",
896 buf[CXINF_DOWNSTREAM_RATE], buf[CXINF_UPSTREAM_RATE]);
897 break;
898
899 case 6:
900 atm_dev_signal_change(atm_dev, ATM_PHY_SIG_LOST);
901 atm_info(usbatm, "ADSL line: waiting\n");
902 break;
903
904 case 7:
905 atm_dev_signal_change(atm_dev, ATM_PHY_SIG_LOST);
906 atm_info(usbatm, "ADSL line: initializing\n");
907 break;
908
909 default:
910 atm_dev_signal_change(atm_dev, ATM_PHY_SIG_UNKNOWN);
911 atm_info(usbatm, "Unknown line state %02x\n", instance->line_status);
912 break;
913 }
914reschedule:
915
916 mutex_lock(&instance->poll_state_serialize);
917 if (instance->poll_state == CXPOLL_STOPPING &&
918 instance->adsl_status == 1 && /* stopped */
919 instance->line_status == 0) /* down */
920 instance->poll_state = CXPOLL_STOPPED;
921
922 if (instance->poll_state == CXPOLL_STOPPED)
923 keep_polling = 0;
924 mutex_unlock(&instance->poll_state_serialize);
925
926 if (keep_polling)
927 schedule_delayed_work(&instance->poll_work,
928 round_jiffies_relative(POLL_INTERVAL*HZ));
929}
930
931static int cxacru_fw(struct usb_device *usb_dev, enum cxacru_fw_request fw,
932 u8 code1, u8 code2, u32 addr, const u8 *data, int size)
933{
934 int ret;
935 u8 *buf;
936 int offd, offb;
937 const int stride = CMD_PACKET_SIZE - 8;
938
939 buf = (u8 *) __get_free_page(GFP_KERNEL);
940 if (!buf)
941 return -ENOMEM;
942
943 offb = offd = 0;
944 do {
945 int l = min_t(int, stride, size - offd);
946
947 buf[offb++] = fw;
948 buf[offb++] = l;
949 buf[offb++] = code1;
950 buf[offb++] = code2;
951 put_unaligned(cpu_to_le32(addr), (__le32 *)(buf + offb));
952 offb += 4;
953 addr += l;
954 if (l)
955 memcpy(buf + offb, data + offd, l);
956 if (l < stride)
957 memset(buf + offb + l, 0, stride - l);
958 offb += stride;
959 offd += stride;
960 if ((offb >= PAGE_SIZE) || (offd >= size)) {
961 ret = usb_bulk_msg(usb_dev, usb_sndbulkpipe(usb_dev, CXACRU_EP_CMD),
962 buf, offb, NULL, CMD_TIMEOUT);
963 if (ret < 0) {
964 dev_dbg(&usb_dev->dev, "sending fw %#x failed\n", fw);
965 goto cleanup;
966 }
967 offb = 0;
968 }
969 } while (offd < size);
970 dev_dbg(&usb_dev->dev, "sent fw %#x\n", fw);
971
972 ret = 0;
973
974cleanup:
975 free_page((unsigned long) buf);
976 return ret;
977}
978
979static void cxacru_upload_firmware(struct cxacru_data *instance,
980 const struct firmware *fw,
981 const struct firmware *bp)
982{
983 int ret;
984 struct usbatm_data *usbatm = instance->usbatm;
985 struct usb_device *usb_dev = usbatm->usb_dev;
986 __le16 signature[] = { usb_dev->descriptor.idVendor,
987 usb_dev->descriptor.idProduct };
988 __le32 val;
989
990 usb_dbg(usbatm, "%s\n", __func__);
991
992 /* FirmwarePllFClkValue */
993 val = cpu_to_le32(instance->modem_type->pll_f_clk);
994 ret = cxacru_fw(usb_dev, FW_WRITE_MEM, 0x2, 0x0, PLLFCLK_ADDR, (u8 *) &val, 4);
995 if (ret) {
996 usb_err(usbatm, "FirmwarePllFClkValue failed: %d\n", ret);
997 return;
998 }
999
1000 /* FirmwarePllBClkValue */
1001 val = cpu_to_le32(instance->modem_type->pll_b_clk);
1002 ret = cxacru_fw(usb_dev, FW_WRITE_MEM, 0x2, 0x0, PLLBCLK_ADDR, (u8 *) &val, 4);
1003 if (ret) {
1004 usb_err(usbatm, "FirmwarePllBClkValue failed: %d\n", ret);
1005 return;
1006 }
1007
1008 /* Enable SDRAM */
1009 val = cpu_to_le32(SDRAM_ENA);
1010 ret = cxacru_fw(usb_dev, FW_WRITE_MEM, 0x2, 0x0, SDRAMEN_ADDR, (u8 *) &val, 4);
1011 if (ret) {
1012 usb_err(usbatm, "Enable SDRAM failed: %d\n", ret);
1013 return;
1014 }
1015
1016 /* Firmware */
1017 usb_info(usbatm, "loading firmware\n");
1018 ret = cxacru_fw(usb_dev, FW_WRITE_MEM, 0x2, 0x0, FW_ADDR, fw->data, fw->size);
1019 if (ret) {
1020 usb_err(usbatm, "Firmware upload failed: %d\n", ret);
1021 return;
1022 }
1023
1024 /* Boot ROM patch */
1025 if (instance->modem_type->boot_rom_patch) {
1026 usb_info(usbatm, "loading boot ROM patch\n");
1027 ret = cxacru_fw(usb_dev, FW_WRITE_MEM, 0x2, 0x0, BR_ADDR, bp->data, bp->size);
1028 if (ret) {
1029 usb_err(usbatm, "Boot ROM patching failed: %d\n", ret);
1030 return;
1031 }
1032 }
1033
1034 /* Signature */
1035 ret = cxacru_fw(usb_dev, FW_WRITE_MEM, 0x2, 0x0, SIG_ADDR, (u8 *) signature, 4);
1036 if (ret) {
1037 usb_err(usbatm, "Signature storing failed: %d\n", ret);
1038 return;
1039 }
1040
1041 usb_info(usbatm, "starting device\n");
1042 if (instance->modem_type->boot_rom_patch) {
1043 val = cpu_to_le32(BR_ADDR);
1044 ret = cxacru_fw(usb_dev, FW_WRITE_MEM, 0x2, 0x0, BR_STACK_ADDR, (u8 *) &val, 4);
1045 } else {
1046 ret = cxacru_fw(usb_dev, FW_GOTO_MEM, 0x0, 0x0, FW_ADDR, NULL, 0);
1047 }
1048 if (ret) {
1049 usb_err(usbatm, "Passing control to firmware failed: %d\n", ret);
1050 return;
1051 }
1052
1053 /* Delay to allow firmware to start up. */
1054 msleep_interruptible(1000);
1055
1056 usb_clear_halt(usb_dev, usb_sndbulkpipe(usb_dev, CXACRU_EP_CMD));
1057 usb_clear_halt(usb_dev, usb_rcvbulkpipe(usb_dev, CXACRU_EP_CMD));
1058 usb_clear_halt(usb_dev, usb_sndbulkpipe(usb_dev, CXACRU_EP_DATA));
1059 usb_clear_halt(usb_dev, usb_rcvbulkpipe(usb_dev, CXACRU_EP_DATA));
1060
1061 ret = cxacru_cm(instance, CM_REQUEST_CARD_GET_STATUS, NULL, 0, NULL, 0);
1062 if (ret < 0) {
1063 usb_err(usbatm, "modem failed to initialize: %d\n", ret);
1064 return;
1065 }
1066}
1067
1068static int cxacru_find_firmware(struct cxacru_data *instance,
1069 char *phase, const struct firmware **fw_p)
1070{
1071 struct usbatm_data *usbatm = instance->usbatm;
1072 struct device *dev = &usbatm->usb_intf->dev;
1073 char buf[16];
1074
1075 sprintf(buf, "cxacru-%s.bin", phase);
1076 usb_dbg(usbatm, "cxacru_find_firmware: looking for %s\n", buf);
1077
1078 if (request_firmware(fw_p, buf, dev)) {
1079 usb_dbg(usbatm, "no stage %s firmware found\n", phase);
1080 return -ENOENT;
1081 }
1082
1083 usb_info(usbatm, "found firmware %s\n", buf);
1084
1085 return 0;
1086}
1087
1088static int cxacru_heavy_init(struct usbatm_data *usbatm_instance,
1089 struct usb_interface *usb_intf)
1090{
1091 const struct firmware *fw, *bp;
1092 struct cxacru_data *instance = usbatm_instance->driver_data;
1093 int ret = cxacru_find_firmware(instance, "fw", &fw);
1094
1095 if (ret) {
1096 usb_warn(usbatm_instance, "firmware (cxacru-fw.bin) unavailable (system misconfigured?)\n");
1097 return ret;
1098 }
1099
1100 if (instance->modem_type->boot_rom_patch) {
1101 ret = cxacru_find_firmware(instance, "bp", &bp);
1102 if (ret) {
1103 usb_warn(usbatm_instance, "boot ROM patch (cxacru-bp.bin) unavailable (system misconfigured?)\n");
1104 release_firmware(fw);
1105 return ret;
1106 }
1107 }
1108
1109 cxacru_upload_firmware(instance, fw, bp);
1110
1111 if (instance->modem_type->boot_rom_patch)
1112 release_firmware(bp);
1113 release_firmware(fw);
1114
1115 ret = cxacru_card_status(instance);
1116 if (ret)
1117 usb_dbg(usbatm_instance, "modem initialisation failed\n");
1118 else
1119 usb_dbg(usbatm_instance, "done setting up the modem\n");
1120
1121 return ret;
1122}
1123
1124static int cxacru_bind(struct usbatm_data *usbatm_instance,
1125 struct usb_interface *intf, const struct usb_device_id *id)
1126{
1127 struct cxacru_data *instance;
1128 struct usb_device *usb_dev = interface_to_usbdev(intf);
1129 struct usb_host_endpoint *cmd_ep = usb_dev->ep_in[CXACRU_EP_CMD];
1130 int ret;
1131
1132 /* instance init */
1133 instance = kzalloc(sizeof(*instance), GFP_KERNEL);
1134 if (!instance)
1135 return -ENOMEM;
1136
1137 instance->usbatm = usbatm_instance;
1138 instance->modem_type = (struct cxacru_modem_type *) id->driver_info;
1139
1140 mutex_init(&instance->poll_state_serialize);
1141 instance->poll_state = CXPOLL_STOPPED;
1142 instance->line_status = -1;
1143 instance->adsl_status = -1;
1144
1145 mutex_init(&instance->adsl_state_serialize);
1146
1147 instance->rcv_buf = (u8 *) __get_free_page(GFP_KERNEL);
1148 if (!instance->rcv_buf) {
1149 usb_dbg(usbatm_instance, "cxacru_bind: no memory for rcv_buf\n");
1150 ret = -ENOMEM;
1151 goto fail;
1152 }
1153 instance->snd_buf = (u8 *) __get_free_page(GFP_KERNEL);
1154 if (!instance->snd_buf) {
1155 usb_dbg(usbatm_instance, "cxacru_bind: no memory for snd_buf\n");
1156 ret = -ENOMEM;
1157 goto fail;
1158 }
1159 instance->rcv_urb = usb_alloc_urb(0, GFP_KERNEL);
1160 if (!instance->rcv_urb) {
1161 ret = -ENOMEM;
1162 goto fail;
1163 }
1164 instance->snd_urb = usb_alloc_urb(0, GFP_KERNEL);
1165 if (!instance->snd_urb) {
1166 ret = -ENOMEM;
1167 goto fail;
1168 }
1169
1170 if (!cmd_ep) {
1171 usb_dbg(usbatm_instance, "cxacru_bind: no command endpoint\n");
1172 ret = -ENODEV;
1173 goto fail;
1174 }
1175
1176 if ((cmd_ep->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
1177 == USB_ENDPOINT_XFER_INT) {
1178 usb_fill_int_urb(instance->rcv_urb,
1179 usb_dev, usb_rcvintpipe(usb_dev, CXACRU_EP_CMD),
1180 instance->rcv_buf, PAGE_SIZE,
1181 cxacru_blocking_completion, &instance->rcv_done, 1);
1182
1183 usb_fill_int_urb(instance->snd_urb,
1184 usb_dev, usb_sndintpipe(usb_dev, CXACRU_EP_CMD),
1185 instance->snd_buf, PAGE_SIZE,
1186 cxacru_blocking_completion, &instance->snd_done, 4);
1187 } else {
1188 usb_fill_bulk_urb(instance->rcv_urb,
1189 usb_dev, usb_rcvbulkpipe(usb_dev, CXACRU_EP_CMD),
1190 instance->rcv_buf, PAGE_SIZE,
1191 cxacru_blocking_completion, &instance->rcv_done);
1192
1193 usb_fill_bulk_urb(instance->snd_urb,
1194 usb_dev, usb_sndbulkpipe(usb_dev, CXACRU_EP_CMD),
1195 instance->snd_buf, PAGE_SIZE,
1196 cxacru_blocking_completion, &instance->snd_done);
1197 }
1198
1199 mutex_init(&instance->cm_serialize);
1200
1201 INIT_DELAYED_WORK(&instance->poll_work, cxacru_poll_status);
1202
1203 usbatm_instance->driver_data = instance;
1204
1205 usbatm_instance->flags = (cxacru_card_status(instance) ? 0 : UDSL_SKIP_HEAVY_INIT);
1206
1207 return 0;
1208
1209 fail:
1210 free_page((unsigned long) instance->snd_buf);
1211 free_page((unsigned long) instance->rcv_buf);
1212 usb_free_urb(instance->snd_urb);
1213 usb_free_urb(instance->rcv_urb);
1214 kfree(instance);
1215
1216 return ret;
1217}
1218
1219static void cxacru_unbind(struct usbatm_data *usbatm_instance,
1220 struct usb_interface *intf)
1221{
1222 struct cxacru_data *instance = usbatm_instance->driver_data;
1223 int is_polling = 1;
1224
1225 usb_dbg(usbatm_instance, "cxacru_unbind entered\n");
1226
1227 if (!instance) {
1228 usb_dbg(usbatm_instance, "cxacru_unbind: NULL instance!\n");
1229 return;
1230 }
1231
1232 mutex_lock(&instance->poll_state_serialize);
1233 BUG_ON(instance->poll_state == CXPOLL_SHUTDOWN);
1234
1235 /* ensure that status polling continues unless
1236 * it has already stopped */
1237 if (instance->poll_state == CXPOLL_STOPPED)
1238 is_polling = 0;
1239
1240 /* stop polling from being stopped or started */
1241 instance->poll_state = CXPOLL_SHUTDOWN;
1242 mutex_unlock(&instance->poll_state_serialize);
1243
1244 if (is_polling)
1245 cancel_delayed_work_sync(&instance->poll_work);
1246
1247 usb_kill_urb(instance->snd_urb);
1248 usb_kill_urb(instance->rcv_urb);
1249 usb_free_urb(instance->snd_urb);
1250 usb_free_urb(instance->rcv_urb);
1251
1252 free_page((unsigned long) instance->snd_buf);
1253 free_page((unsigned long) instance->rcv_buf);
1254
1255 kfree(instance);
1256
1257 usbatm_instance->driver_data = NULL;
1258}
1259
1260static const struct cxacru_modem_type cxacru_cafe = {
1261 .pll_f_clk = 0x02d874df,
1262 .pll_b_clk = 0x0196a51a,
1263 .boot_rom_patch = 1,
1264};
1265
1266static const struct cxacru_modem_type cxacru_cb00 = {
1267 .pll_f_clk = 0x5,
1268 .pll_b_clk = 0x3,
1269 .boot_rom_patch = 0,
1270};
1271
1272static const struct usb_device_id cxacru_usb_ids[] = {
1273 { /* V = Conexant P = ADSL modem (Euphrates project) */
1274 USB_DEVICE(0x0572, 0xcafe), .driver_info = (unsigned long) &cxacru_cafe
1275 },
1276 { /* V = Conexant P = ADSL modem (Hasbani project) */
1277 USB_DEVICE(0x0572, 0xcb00), .driver_info = (unsigned long) &cxacru_cb00
1278 },
1279 { /* V = Conexant P = ADSL modem */
1280 USB_DEVICE(0x0572, 0xcb01), .driver_info = (unsigned long) &cxacru_cb00
1281 },
1282 { /* V = Conexant P = ADSL modem (Well PTI-800) */
1283 USB_DEVICE(0x0572, 0xcb02), .driver_info = (unsigned long) &cxacru_cb00
1284 },
1285 { /* V = Conexant P = ADSL modem */
1286 USB_DEVICE(0x0572, 0xcb06), .driver_info = (unsigned long) &cxacru_cb00
1287 },
1288 { /* V = Conexant P = ADSL modem (ZTE ZXDSL 852) */
1289 USB_DEVICE(0x0572, 0xcb07), .driver_info = (unsigned long) &cxacru_cb00
1290 },
1291 { /* V = Olitec P = ADSL modem version 2 */
1292 USB_DEVICE(0x08e3, 0x0100), .driver_info = (unsigned long) &cxacru_cafe
1293 },
1294 { /* V = Olitec P = ADSL modem version 3 */
1295 USB_DEVICE(0x08e3, 0x0102), .driver_info = (unsigned long) &cxacru_cb00
1296 },
1297 { /* V = Trust/Amigo Technology Co. P = AMX-CA86U */
1298 USB_DEVICE(0x0eb0, 0x3457), .driver_info = (unsigned long) &cxacru_cafe
1299 },
1300 { /* V = Zoom P = 5510 */
1301 USB_DEVICE(0x1803, 0x5510), .driver_info = (unsigned long) &cxacru_cb00
1302 },
1303 { /* V = Draytek P = Vigor 318 */
1304 USB_DEVICE(0x0675, 0x0200), .driver_info = (unsigned long) &cxacru_cb00
1305 },
1306 { /* V = Zyxel P = 630-C1 aka OMNI ADSL USB (Annex A) */
1307 USB_DEVICE(0x0586, 0x330a), .driver_info = (unsigned long) &cxacru_cb00
1308 },
1309 { /* V = Zyxel P = 630-C3 aka OMNI ADSL USB (Annex B) */
1310 USB_DEVICE(0x0586, 0x330b), .driver_info = (unsigned long) &cxacru_cb00
1311 },
1312 { /* V = Aethra P = Starmodem UM1020 */
1313 USB_DEVICE(0x0659, 0x0020), .driver_info = (unsigned long) &cxacru_cb00
1314 },
1315 { /* V = Aztech Systems P = ? AKA Pirelli AUA-010 */
1316 USB_DEVICE(0x0509, 0x0812), .driver_info = (unsigned long) &cxacru_cb00
1317 },
1318 { /* V = Netopia P = Cayman 3341(Annex A)/3351(Annex B) */
1319 USB_DEVICE(0x100d, 0xcb01), .driver_info = (unsigned long) &cxacru_cb00
1320 },
1321 { /* V = Netopia P = Cayman 3342(Annex A)/3352(Annex B) */
1322 USB_DEVICE(0x100d, 0x3342), .driver_info = (unsigned long) &cxacru_cb00
1323 },
1324 {}
1325};
1326
1327MODULE_DEVICE_TABLE(usb, cxacru_usb_ids);
1328
1329static struct usbatm_driver cxacru_driver = {
1330 .driver_name = cxacru_driver_name,
1331 .bind = cxacru_bind,
1332 .heavy_init = cxacru_heavy_init,
1333 .unbind = cxacru_unbind,
1334 .atm_start = cxacru_atm_start,
1335 .atm_stop = cxacru_remove_device_files,
1336 .bulk_in = CXACRU_EP_DATA,
1337 .bulk_out = CXACRU_EP_DATA,
1338 .rx_padding = 3,
1339 .tx_padding = 11,
1340};
1341
1342static int cxacru_usb_probe(struct usb_interface *intf,
1343 const struct usb_device_id *id)
1344{
1345 struct usb_device *usb_dev = interface_to_usbdev(intf);
1346 char buf[15];
1347
1348 /* Avoid ADSL routers (cx82310_eth).
1349 * Abort if bDeviceClass is 0xff and iProduct is "USB NET CARD".
1350 */
1351 if (usb_dev->descriptor.bDeviceClass == USB_CLASS_VENDOR_SPEC
1352 && usb_string(usb_dev, usb_dev->descriptor.iProduct,
1353 buf, sizeof(buf)) > 0) {
1354 if (!strcmp(buf, "USB NET CARD")) {
1355 dev_info(&intf->dev, "ignoring cx82310_eth device\n");
1356 return -ENODEV;
1357 }
1358 }
1359
1360 return usbatm_usb_probe(intf, id, &cxacru_driver);
1361}
1362
1363static struct usb_driver cxacru_usb_driver = {
1364 .name = cxacru_driver_name,
1365 .probe = cxacru_usb_probe,
1366 .disconnect = usbatm_usb_disconnect,
1367 .id_table = cxacru_usb_ids
1368};
1369
1370module_usb_driver(cxacru_usb_driver);
1371
1372MODULE_AUTHOR(DRIVER_AUTHOR);
1373MODULE_DESCRIPTION(DRIVER_DESC);
1374MODULE_LICENSE("GPL");