Loading...
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * zs.c: Serial port driver for IOASIC DECstations.
4 *
5 * Derived from drivers/sbus/char/sunserial.c by Paul Mackerras.
6 * Derived from drivers/macintosh/macserial.c by Harald Koerfgen.
7 *
8 * DECstation changes
9 * Copyright (C) 1998-2000 Harald Koerfgen
10 * Copyright (C) 2000, 2001, 2002, 2003, 2004, 2005, 2007 Maciej W. Rozycki
11 *
12 * For the rest of the code the original Copyright applies:
13 * Copyright (C) 1996 Paul Mackerras (Paul.Mackerras@cs.anu.edu.au)
14 * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
15 *
16 *
17 * Note: for IOASIC systems the wiring is as follows:
18 *
19 * mouse/keyboard:
20 * DIN-7 MJ-4 signal SCC
21 * 2 1 TxD <- A.TxD
22 * 3 4 RxD -> A.RxD
23 *
24 * EIA-232/EIA-423:
25 * DB-25 MMJ-6 signal SCC
26 * 2 2 TxD <- B.TxD
27 * 3 5 RxD -> B.RxD
28 * 4 RTS <- ~A.RTS
29 * 5 CTS -> ~B.CTS
30 * 6 6 DSR -> ~A.SYNC
31 * 8 CD -> ~B.DCD
32 * 12 DSRS(DCE) -> ~A.CTS (*)
33 * 15 TxC -> B.TxC
34 * 17 RxC -> B.RxC
35 * 20 1 DTR <- ~A.DTR
36 * 22 RI -> ~A.DCD
37 * 23 DSRS(DTE) <- ~B.RTS
38 *
39 * (*) EIA-232 defines the signal at this pin to be SCD, while DSRS(DCE)
40 * is shared with DSRS(DTE) at pin 23.
41 *
42 * As you can immediately notice the wiring of the RTS, DTR and DSR signals
43 * is a bit odd. This makes the handling of port B unnecessarily
44 * complicated and prevents the use of some automatic modes of operation.
45 */
46
47#include <linux/bug.h>
48#include <linux/console.h>
49#include <linux/delay.h>
50#include <linux/errno.h>
51#include <linux/init.h>
52#include <linux/interrupt.h>
53#include <linux/io.h>
54#include <linux/ioport.h>
55#include <linux/irqflags.h>
56#include <linux/kernel.h>
57#include <linux/module.h>
58#include <linux/major.h>
59#include <linux/serial.h>
60#include <linux/serial_core.h>
61#include <linux/spinlock.h>
62#include <linux/sysrq.h>
63#include <linux/tty.h>
64#include <linux/tty_flip.h>
65#include <linux/types.h>
66
67#include <linux/atomic.h>
68
69#include <asm/dec/interrupts.h>
70#include <asm/dec/ioasic_addrs.h>
71#include <asm/dec/system.h>
72
73#include "zs.h"
74
75
76MODULE_AUTHOR("Maciej W. Rozycki <macro@linux-mips.org>");
77MODULE_DESCRIPTION("DECstation Z85C30 serial driver");
78MODULE_LICENSE("GPL");
79
80
81static char zs_name[] __initdata = "DECstation Z85C30 serial driver version ";
82static char zs_version[] __initdata = "0.10";
83
84/*
85 * It would be nice to dynamically allocate everything that
86 * depends on ZS_NUM_SCCS, so we could support any number of
87 * Z85C30s, but for now...
88 */
89#define ZS_NUM_SCCS 2 /* Max # of ZS chips supported. */
90#define ZS_NUM_CHAN 2 /* 2 channels per chip. */
91#define ZS_CHAN_A 0 /* Index of the channel A. */
92#define ZS_CHAN_B 1 /* Index of the channel B. */
93#define ZS_CHAN_IO_SIZE 8 /* IOMEM space size. */
94#define ZS_CHAN_IO_STRIDE 4 /* Register alignment. */
95#define ZS_CHAN_IO_OFFSET 1 /* The SCC resides on the high byte
96 of the 16-bit IOBUS. */
97#define ZS_CLOCK 7372800 /* Z85C30 PCLK input clock rate. */
98
99#define to_zport(uport) container_of(uport, struct zs_port, port)
100
101struct zs_parms {
102 resource_size_t scc[ZS_NUM_SCCS];
103 int irq[ZS_NUM_SCCS];
104};
105
106static struct zs_scc zs_sccs[ZS_NUM_SCCS];
107
108static u8 zs_init_regs[ZS_NUM_REGS] __initdata = {
109 0, /* write 0 */
110 PAR_SPEC, /* write 1 */
111 0, /* write 2 */
112 0, /* write 3 */
113 X16CLK | SB1, /* write 4 */
114 0, /* write 5 */
115 0, 0, 0, /* write 6, 7, 8 */
116 MIE | DLC | NV, /* write 9 */
117 NRZ, /* write 10 */
118 TCBR | RCBR, /* write 11 */
119 0, 0, /* BRG time constant, write 12 + 13 */
120 BRSRC | BRENABL, /* write 14 */
121 0, /* write 15 */
122};
123
124/*
125 * Debugging.
126 */
127#undef ZS_DEBUG_REGS
128
129
130/*
131 * Reading and writing Z85C30 registers.
132 */
133static void recovery_delay(void)
134{
135 udelay(2);
136}
137
138static u8 read_zsreg(struct zs_port *zport, int reg)
139{
140 void __iomem *control = zport->port.membase + ZS_CHAN_IO_OFFSET;
141 u8 retval;
142
143 if (reg != 0) {
144 writeb(reg & 0xf, control);
145 fast_iob();
146 recovery_delay();
147 }
148 retval = readb(control);
149 recovery_delay();
150 return retval;
151}
152
153static void write_zsreg(struct zs_port *zport, int reg, u8 value)
154{
155 void __iomem *control = zport->port.membase + ZS_CHAN_IO_OFFSET;
156
157 if (reg != 0) {
158 writeb(reg & 0xf, control);
159 fast_iob(); recovery_delay();
160 }
161 writeb(value, control);
162 fast_iob();
163 recovery_delay();
164 return;
165}
166
167static u8 read_zsdata(struct zs_port *zport)
168{
169 void __iomem *data = zport->port.membase +
170 ZS_CHAN_IO_STRIDE + ZS_CHAN_IO_OFFSET;
171 u8 retval;
172
173 retval = readb(data);
174 recovery_delay();
175 return retval;
176}
177
178static void write_zsdata(struct zs_port *zport, u8 value)
179{
180 void __iomem *data = zport->port.membase +
181 ZS_CHAN_IO_STRIDE + ZS_CHAN_IO_OFFSET;
182
183 writeb(value, data);
184 fast_iob();
185 recovery_delay();
186 return;
187}
188
189#ifdef ZS_DEBUG_REGS
190void zs_dump(void)
191{
192 struct zs_port *zport;
193 int i, j;
194
195 for (i = 0; i < ZS_NUM_SCCS * ZS_NUM_CHAN; i++) {
196 zport = &zs_sccs[i / ZS_NUM_CHAN].zport[i % ZS_NUM_CHAN];
197
198 if (!zport->scc)
199 continue;
200
201 for (j = 0; j < 16; j++)
202 printk("W%-2d = 0x%02x\t", j, zport->regs[j]);
203 printk("\n");
204 for (j = 0; j < 16; j++)
205 printk("R%-2d = 0x%02x\t", j, read_zsreg(zport, j));
206 printk("\n\n");
207 }
208}
209#endif
210
211
212static void zs_spin_lock_cond_irq(spinlock_t *lock, int irq)
213{
214 if (irq)
215 spin_lock_irq(lock);
216 else
217 spin_lock(lock);
218}
219
220static void zs_spin_unlock_cond_irq(spinlock_t *lock, int irq)
221{
222 if (irq)
223 spin_unlock_irq(lock);
224 else
225 spin_unlock(lock);
226}
227
228static int zs_receive_drain(struct zs_port *zport)
229{
230 int loops = 10000;
231
232 while ((read_zsreg(zport, R0) & Rx_CH_AV) && --loops)
233 read_zsdata(zport);
234 return loops;
235}
236
237static int zs_transmit_drain(struct zs_port *zport, int irq)
238{
239 struct zs_scc *scc = zport->scc;
240 int loops = 10000;
241
242 while (!(read_zsreg(zport, R0) & Tx_BUF_EMP) && --loops) {
243 zs_spin_unlock_cond_irq(&scc->zlock, irq);
244 udelay(2);
245 zs_spin_lock_cond_irq(&scc->zlock, irq);
246 }
247 return loops;
248}
249
250static int zs_line_drain(struct zs_port *zport, int irq)
251{
252 struct zs_scc *scc = zport->scc;
253 int loops = 10000;
254
255 while (!(read_zsreg(zport, R1) & ALL_SNT) && --loops) {
256 zs_spin_unlock_cond_irq(&scc->zlock, irq);
257 udelay(2);
258 zs_spin_lock_cond_irq(&scc->zlock, irq);
259 }
260 return loops;
261}
262
263
264static void load_zsregs(struct zs_port *zport, u8 *regs, int irq)
265{
266 /* Let the current transmission finish. */
267 zs_line_drain(zport, irq);
268 /* Load 'em up. */
269 write_zsreg(zport, R3, regs[3] & ~RxENABLE);
270 write_zsreg(zport, R5, regs[5] & ~TxENAB);
271 write_zsreg(zport, R4, regs[4]);
272 write_zsreg(zport, R9, regs[9]);
273 write_zsreg(zport, R1, regs[1]);
274 write_zsreg(zport, R2, regs[2]);
275 write_zsreg(zport, R10, regs[10]);
276 write_zsreg(zport, R14, regs[14] & ~BRENABL);
277 write_zsreg(zport, R11, regs[11]);
278 write_zsreg(zport, R12, regs[12]);
279 write_zsreg(zport, R13, regs[13]);
280 write_zsreg(zport, R14, regs[14]);
281 write_zsreg(zport, R15, regs[15]);
282 if (regs[3] & RxENABLE)
283 write_zsreg(zport, R3, regs[3]);
284 if (regs[5] & TxENAB)
285 write_zsreg(zport, R5, regs[5]);
286 return;
287}
288
289
290/*
291 * Status handling routines.
292 */
293
294/*
295 * zs_tx_empty() -- get the transmitter empty status
296 *
297 * Purpose: Let user call ioctl() to get info when the UART physically
298 * is emptied. On bus types like RS485, the transmitter must
299 * release the bus after transmitting. This must be done when
300 * the transmit shift register is empty, not be done when the
301 * transmit holding register is empty. This functionality
302 * allows an RS485 driver to be written in user space.
303 */
304static unsigned int zs_tx_empty(struct uart_port *uport)
305{
306 struct zs_port *zport = to_zport(uport);
307 struct zs_scc *scc = zport->scc;
308 unsigned long flags;
309 u8 status;
310
311 spin_lock_irqsave(&scc->zlock, flags);
312 status = read_zsreg(zport, R1);
313 spin_unlock_irqrestore(&scc->zlock, flags);
314
315 return status & ALL_SNT ? TIOCSER_TEMT : 0;
316}
317
318static unsigned int zs_raw_get_ab_mctrl(struct zs_port *zport_a,
319 struct zs_port *zport_b)
320{
321 u8 status_a, status_b;
322 unsigned int mctrl;
323
324 status_a = read_zsreg(zport_a, R0);
325 status_b = read_zsreg(zport_b, R0);
326
327 mctrl = ((status_b & CTS) ? TIOCM_CTS : 0) |
328 ((status_b & DCD) ? TIOCM_CAR : 0) |
329 ((status_a & DCD) ? TIOCM_RNG : 0) |
330 ((status_a & SYNC_HUNT) ? TIOCM_DSR : 0);
331
332 return mctrl;
333}
334
335static unsigned int zs_raw_get_mctrl(struct zs_port *zport)
336{
337 struct zs_port *zport_a = &zport->scc->zport[ZS_CHAN_A];
338
339 return zport != zport_a ? zs_raw_get_ab_mctrl(zport_a, zport) : 0;
340}
341
342static unsigned int zs_raw_xor_mctrl(struct zs_port *zport)
343{
344 struct zs_port *zport_a = &zport->scc->zport[ZS_CHAN_A];
345 unsigned int mmask, mctrl, delta;
346 u8 mask_a, mask_b;
347
348 if (zport == zport_a)
349 return 0;
350
351 mask_a = zport_a->regs[15];
352 mask_b = zport->regs[15];
353
354 mmask = ((mask_b & CTSIE) ? TIOCM_CTS : 0) |
355 ((mask_b & DCDIE) ? TIOCM_CAR : 0) |
356 ((mask_a & DCDIE) ? TIOCM_RNG : 0) |
357 ((mask_a & SYNCIE) ? TIOCM_DSR : 0);
358
359 mctrl = zport->mctrl;
360 if (mmask) {
361 mctrl &= ~mmask;
362 mctrl |= zs_raw_get_ab_mctrl(zport_a, zport) & mmask;
363 }
364
365 delta = mctrl ^ zport->mctrl;
366 if (delta)
367 zport->mctrl = mctrl;
368
369 return delta;
370}
371
372static unsigned int zs_get_mctrl(struct uart_port *uport)
373{
374 struct zs_port *zport = to_zport(uport);
375 struct zs_scc *scc = zport->scc;
376 unsigned int mctrl;
377
378 spin_lock(&scc->zlock);
379 mctrl = zs_raw_get_mctrl(zport);
380 spin_unlock(&scc->zlock);
381
382 return mctrl;
383}
384
385static void zs_set_mctrl(struct uart_port *uport, unsigned int mctrl)
386{
387 struct zs_port *zport = to_zport(uport);
388 struct zs_scc *scc = zport->scc;
389 struct zs_port *zport_a = &scc->zport[ZS_CHAN_A];
390 u8 oldloop, newloop;
391
392 spin_lock(&scc->zlock);
393 if (zport != zport_a) {
394 if (mctrl & TIOCM_DTR)
395 zport_a->regs[5] |= DTR;
396 else
397 zport_a->regs[5] &= ~DTR;
398 if (mctrl & TIOCM_RTS)
399 zport_a->regs[5] |= RTS;
400 else
401 zport_a->regs[5] &= ~RTS;
402 write_zsreg(zport_a, R5, zport_a->regs[5]);
403 }
404
405 /* Rarely modified, so don't poke at hardware unless necessary. */
406 oldloop = zport->regs[14];
407 newloop = oldloop;
408 if (mctrl & TIOCM_LOOP)
409 newloop |= LOOPBAK;
410 else
411 newloop &= ~LOOPBAK;
412 if (newloop != oldloop) {
413 zport->regs[14] = newloop;
414 write_zsreg(zport, R14, zport->regs[14]);
415 }
416 spin_unlock(&scc->zlock);
417}
418
419static void zs_raw_stop_tx(struct zs_port *zport)
420{
421 write_zsreg(zport, R0, RES_Tx_P);
422 zport->tx_stopped = 1;
423}
424
425static void zs_stop_tx(struct uart_port *uport)
426{
427 struct zs_port *zport = to_zport(uport);
428 struct zs_scc *scc = zport->scc;
429
430 spin_lock(&scc->zlock);
431 zs_raw_stop_tx(zport);
432 spin_unlock(&scc->zlock);
433}
434
435static void zs_raw_transmit_chars(struct zs_port *);
436
437static void zs_start_tx(struct uart_port *uport)
438{
439 struct zs_port *zport = to_zport(uport);
440 struct zs_scc *scc = zport->scc;
441
442 spin_lock(&scc->zlock);
443 if (zport->tx_stopped) {
444 zs_transmit_drain(zport, 0);
445 zport->tx_stopped = 0;
446 zs_raw_transmit_chars(zport);
447 }
448 spin_unlock(&scc->zlock);
449}
450
451static void zs_stop_rx(struct uart_port *uport)
452{
453 struct zs_port *zport = to_zport(uport);
454 struct zs_scc *scc = zport->scc;
455 struct zs_port *zport_a = &scc->zport[ZS_CHAN_A];
456
457 spin_lock(&scc->zlock);
458 zport->regs[15] &= ~BRKIE;
459 zport->regs[1] &= ~(RxINT_MASK | TxINT_ENAB);
460 zport->regs[1] |= RxINT_DISAB;
461
462 if (zport != zport_a) {
463 /* A-side DCD tracks RI and SYNC tracks DSR. */
464 zport_a->regs[15] &= ~(DCDIE | SYNCIE);
465 write_zsreg(zport_a, R15, zport_a->regs[15]);
466 if (!(zport_a->regs[15] & BRKIE)) {
467 zport_a->regs[1] &= ~EXT_INT_ENAB;
468 write_zsreg(zport_a, R1, zport_a->regs[1]);
469 }
470
471 /* This-side DCD tracks DCD and CTS tracks CTS. */
472 zport->regs[15] &= ~(DCDIE | CTSIE);
473 zport->regs[1] &= ~EXT_INT_ENAB;
474 } else {
475 /* DCD tracks RI and SYNC tracks DSR for the B side. */
476 if (!(zport->regs[15] & (DCDIE | SYNCIE)))
477 zport->regs[1] &= ~EXT_INT_ENAB;
478 }
479
480 write_zsreg(zport, R15, zport->regs[15]);
481 write_zsreg(zport, R1, zport->regs[1]);
482 spin_unlock(&scc->zlock);
483}
484
485static void zs_enable_ms(struct uart_port *uport)
486{
487 struct zs_port *zport = to_zport(uport);
488 struct zs_scc *scc = zport->scc;
489 struct zs_port *zport_a = &scc->zport[ZS_CHAN_A];
490
491 if (zport == zport_a)
492 return;
493
494 spin_lock(&scc->zlock);
495
496 /* Clear Ext interrupts if not being handled already. */
497 if (!(zport_a->regs[1] & EXT_INT_ENAB))
498 write_zsreg(zport_a, R0, RES_EXT_INT);
499
500 /* A-side DCD tracks RI and SYNC tracks DSR. */
501 zport_a->regs[1] |= EXT_INT_ENAB;
502 zport_a->regs[15] |= DCDIE | SYNCIE;
503
504 /* This-side DCD tracks DCD and CTS tracks CTS. */
505 zport->regs[15] |= DCDIE | CTSIE;
506
507 zs_raw_xor_mctrl(zport);
508
509 write_zsreg(zport_a, R1, zport_a->regs[1]);
510 write_zsreg(zport_a, R15, zport_a->regs[15]);
511 write_zsreg(zport, R15, zport->regs[15]);
512 spin_unlock(&scc->zlock);
513}
514
515static void zs_break_ctl(struct uart_port *uport, int break_state)
516{
517 struct zs_port *zport = to_zport(uport);
518 struct zs_scc *scc = zport->scc;
519 unsigned long flags;
520
521 spin_lock_irqsave(&scc->zlock, flags);
522 if (break_state == -1)
523 zport->regs[5] |= SND_BRK;
524 else
525 zport->regs[5] &= ~SND_BRK;
526 write_zsreg(zport, R5, zport->regs[5]);
527 spin_unlock_irqrestore(&scc->zlock, flags);
528}
529
530
531/*
532 * Interrupt handling routines.
533 */
534#define Rx_BRK 0x0100 /* BREAK event software flag. */
535#define Rx_SYS 0x0200 /* SysRq event software flag. */
536
537static void zs_receive_chars(struct zs_port *zport)
538{
539 struct uart_port *uport = &zport->port;
540 struct zs_scc *scc = zport->scc;
541 struct uart_icount *icount;
542 unsigned int avail, status;
543 int count;
544 u8 ch, flag;
545
546 for (count = 16; count; count--) {
547 spin_lock(&scc->zlock);
548 avail = read_zsreg(zport, R0) & Rx_CH_AV;
549 spin_unlock(&scc->zlock);
550 if (!avail)
551 break;
552
553 spin_lock(&scc->zlock);
554 status = read_zsreg(zport, R1) & (Rx_OVR | FRM_ERR | PAR_ERR);
555 ch = read_zsdata(zport);
556 spin_unlock(&scc->zlock);
557
558 flag = TTY_NORMAL;
559
560 icount = &uport->icount;
561 icount->rx++;
562
563 /* Handle the null char got when BREAK is removed. */
564 if (!ch)
565 status |= zport->tty_break;
566 if (unlikely(status &
567 (Rx_OVR | FRM_ERR | PAR_ERR | Rx_SYS | Rx_BRK))) {
568 zport->tty_break = 0;
569
570 /* Reset the error indication. */
571 if (status & (Rx_OVR | FRM_ERR | PAR_ERR)) {
572 spin_lock(&scc->zlock);
573 write_zsreg(zport, R0, ERR_RES);
574 spin_unlock(&scc->zlock);
575 }
576
577 if (status & (Rx_SYS | Rx_BRK)) {
578 icount->brk++;
579 /* SysRq discards the null char. */
580 if (status & Rx_SYS)
581 continue;
582 } else if (status & FRM_ERR)
583 icount->frame++;
584 else if (status & PAR_ERR)
585 icount->parity++;
586 if (status & Rx_OVR)
587 icount->overrun++;
588
589 status &= uport->read_status_mask;
590 if (status & Rx_BRK)
591 flag = TTY_BREAK;
592 else if (status & FRM_ERR)
593 flag = TTY_FRAME;
594 else if (status & PAR_ERR)
595 flag = TTY_PARITY;
596 }
597
598 if (uart_handle_sysrq_char(uport, ch))
599 continue;
600
601 uart_insert_char(uport, status, Rx_OVR, ch, flag);
602 }
603
604 tty_flip_buffer_push(&uport->state->port);
605}
606
607static void zs_raw_transmit_chars(struct zs_port *zport)
608{
609 struct circ_buf *xmit = &zport->port.state->xmit;
610
611 /* XON/XOFF chars. */
612 if (zport->port.x_char) {
613 write_zsdata(zport, zport->port.x_char);
614 zport->port.icount.tx++;
615 zport->port.x_char = 0;
616 return;
617 }
618
619 /* If nothing to do or stopped or hardware stopped. */
620 if (uart_circ_empty(xmit) || uart_tx_stopped(&zport->port)) {
621 zs_raw_stop_tx(zport);
622 return;
623 }
624
625 /* Send char. */
626 write_zsdata(zport, xmit->buf[xmit->tail]);
627 uart_xmit_advance(&zport->port, 1);
628
629 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
630 uart_write_wakeup(&zport->port);
631
632 /* Are we are done? */
633 if (uart_circ_empty(xmit))
634 zs_raw_stop_tx(zport);
635}
636
637static void zs_transmit_chars(struct zs_port *zport)
638{
639 struct zs_scc *scc = zport->scc;
640
641 spin_lock(&scc->zlock);
642 zs_raw_transmit_chars(zport);
643 spin_unlock(&scc->zlock);
644}
645
646static void zs_status_handle(struct zs_port *zport, struct zs_port *zport_a)
647{
648 struct uart_port *uport = &zport->port;
649 struct zs_scc *scc = zport->scc;
650 unsigned int delta;
651 u8 status, brk;
652
653 spin_lock(&scc->zlock);
654
655 /* Get status from Read Register 0. */
656 status = read_zsreg(zport, R0);
657
658 if (zport->regs[15] & BRKIE) {
659 brk = status & BRK_ABRT;
660 if (brk && !zport->brk) {
661 spin_unlock(&scc->zlock);
662 if (uart_handle_break(uport))
663 zport->tty_break = Rx_SYS;
664 else
665 zport->tty_break = Rx_BRK;
666 spin_lock(&scc->zlock);
667 }
668 zport->brk = brk;
669 }
670
671 if (zport != zport_a) {
672 delta = zs_raw_xor_mctrl(zport);
673 spin_unlock(&scc->zlock);
674
675 if (delta & TIOCM_CTS)
676 uart_handle_cts_change(uport,
677 zport->mctrl & TIOCM_CTS);
678 if (delta & TIOCM_CAR)
679 uart_handle_dcd_change(uport,
680 zport->mctrl & TIOCM_CAR);
681 if (delta & TIOCM_RNG)
682 uport->icount.dsr++;
683 if (delta & TIOCM_DSR)
684 uport->icount.rng++;
685
686 if (delta)
687 wake_up_interruptible(&uport->state->port.delta_msr_wait);
688
689 spin_lock(&scc->zlock);
690 }
691
692 /* Clear the status condition... */
693 write_zsreg(zport, R0, RES_EXT_INT);
694
695 spin_unlock(&scc->zlock);
696}
697
698/*
699 * This is the Z85C30 driver's generic interrupt routine.
700 */
701static irqreturn_t zs_interrupt(int irq, void *dev_id)
702{
703 struct zs_scc *scc = dev_id;
704 struct zs_port *zport_a = &scc->zport[ZS_CHAN_A];
705 struct zs_port *zport_b = &scc->zport[ZS_CHAN_B];
706 irqreturn_t status = IRQ_NONE;
707 u8 zs_intreg;
708 int count;
709
710 /*
711 * NOTE: The read register 3, which holds the irq status,
712 * does so for both channels on each chip. Although
713 * the status value itself must be read from the A
714 * channel and is only valid when read from channel A.
715 * Yes... broken hardware...
716 */
717 for (count = 16; count; count--) {
718 spin_lock(&scc->zlock);
719 zs_intreg = read_zsreg(zport_a, R3);
720 spin_unlock(&scc->zlock);
721 if (!zs_intreg)
722 break;
723
724 /*
725 * We do not like losing characters, so we prioritise
726 * interrupt sources a little bit differently than
727 * the SCC would, was it allowed to.
728 */
729 if (zs_intreg & CHBRxIP)
730 zs_receive_chars(zport_b);
731 if (zs_intreg & CHARxIP)
732 zs_receive_chars(zport_a);
733 if (zs_intreg & CHBEXT)
734 zs_status_handle(zport_b, zport_a);
735 if (zs_intreg & CHAEXT)
736 zs_status_handle(zport_a, zport_a);
737 if (zs_intreg & CHBTxIP)
738 zs_transmit_chars(zport_b);
739 if (zs_intreg & CHATxIP)
740 zs_transmit_chars(zport_a);
741
742 status = IRQ_HANDLED;
743 }
744
745 return status;
746}
747
748
749/*
750 * Finally, routines used to initialize the serial port.
751 */
752static int zs_startup(struct uart_port *uport)
753{
754 struct zs_port *zport = to_zport(uport);
755 struct zs_scc *scc = zport->scc;
756 unsigned long flags;
757 int irq_guard;
758 int ret;
759
760 irq_guard = atomic_add_return(1, &scc->irq_guard);
761 if (irq_guard == 1) {
762 ret = request_irq(zport->port.irq, zs_interrupt,
763 IRQF_SHARED, "scc", scc);
764 if (ret) {
765 atomic_add(-1, &scc->irq_guard);
766 printk(KERN_ERR "zs: can't get irq %d\n",
767 zport->port.irq);
768 return ret;
769 }
770 }
771
772 spin_lock_irqsave(&scc->zlock, flags);
773
774 /* Clear the receive FIFO. */
775 zs_receive_drain(zport);
776
777 /* Clear the interrupt registers. */
778 write_zsreg(zport, R0, ERR_RES);
779 write_zsreg(zport, R0, RES_Tx_P);
780 /* But Ext only if not being handled already. */
781 if (!(zport->regs[1] & EXT_INT_ENAB))
782 write_zsreg(zport, R0, RES_EXT_INT);
783
784 /* Finally, enable sequencing and interrupts. */
785 zport->regs[1] &= ~RxINT_MASK;
786 zport->regs[1] |= RxINT_ALL | TxINT_ENAB | EXT_INT_ENAB;
787 zport->regs[3] |= RxENABLE;
788 zport->regs[15] |= BRKIE;
789 write_zsreg(zport, R1, zport->regs[1]);
790 write_zsreg(zport, R3, zport->regs[3]);
791 write_zsreg(zport, R5, zport->regs[5]);
792 write_zsreg(zport, R15, zport->regs[15]);
793
794 /* Record the current state of RR0. */
795 zport->mctrl = zs_raw_get_mctrl(zport);
796 zport->brk = read_zsreg(zport, R0) & BRK_ABRT;
797
798 zport->tx_stopped = 1;
799
800 spin_unlock_irqrestore(&scc->zlock, flags);
801
802 return 0;
803}
804
805static void zs_shutdown(struct uart_port *uport)
806{
807 struct zs_port *zport = to_zport(uport);
808 struct zs_scc *scc = zport->scc;
809 unsigned long flags;
810 int irq_guard;
811
812 spin_lock_irqsave(&scc->zlock, flags);
813
814 zport->regs[3] &= ~RxENABLE;
815 write_zsreg(zport, R5, zport->regs[5]);
816 write_zsreg(zport, R3, zport->regs[3]);
817
818 spin_unlock_irqrestore(&scc->zlock, flags);
819
820 irq_guard = atomic_add_return(-1, &scc->irq_guard);
821 if (!irq_guard)
822 free_irq(zport->port.irq, scc);
823}
824
825
826static void zs_reset(struct zs_port *zport)
827{
828 struct zs_scc *scc = zport->scc;
829 int irq;
830 unsigned long flags;
831
832 spin_lock_irqsave(&scc->zlock, flags);
833 irq = !irqs_disabled_flags(flags);
834 if (!scc->initialised) {
835 /* Reset the pointer first, just in case... */
836 read_zsreg(zport, R0);
837 /* And let the current transmission finish. */
838 zs_line_drain(zport, irq);
839 write_zsreg(zport, R9, FHWRES);
840 udelay(10);
841 write_zsreg(zport, R9, 0);
842 scc->initialised = 1;
843 }
844 load_zsregs(zport, zport->regs, irq);
845 spin_unlock_irqrestore(&scc->zlock, flags);
846}
847
848static void zs_set_termios(struct uart_port *uport, struct ktermios *termios,
849 const struct ktermios *old_termios)
850{
851 struct zs_port *zport = to_zport(uport);
852 struct zs_scc *scc = zport->scc;
853 struct zs_port *zport_a = &scc->zport[ZS_CHAN_A];
854 int irq;
855 unsigned int baud, brg;
856 unsigned long flags;
857
858 spin_lock_irqsave(&scc->zlock, flags);
859 irq = !irqs_disabled_flags(flags);
860
861 /* Byte size. */
862 zport->regs[3] &= ~RxNBITS_MASK;
863 zport->regs[5] &= ~TxNBITS_MASK;
864 switch (termios->c_cflag & CSIZE) {
865 case CS5:
866 zport->regs[3] |= Rx5;
867 zport->regs[5] |= Tx5;
868 break;
869 case CS6:
870 zport->regs[3] |= Rx6;
871 zport->regs[5] |= Tx6;
872 break;
873 case CS7:
874 zport->regs[3] |= Rx7;
875 zport->regs[5] |= Tx7;
876 break;
877 case CS8:
878 default:
879 zport->regs[3] |= Rx8;
880 zport->regs[5] |= Tx8;
881 break;
882 }
883
884 /* Parity and stop bits. */
885 zport->regs[4] &= ~(XCLK_MASK | SB_MASK | PAR_ENA | PAR_EVEN);
886 if (termios->c_cflag & CSTOPB)
887 zport->regs[4] |= SB2;
888 else
889 zport->regs[4] |= SB1;
890 if (termios->c_cflag & PARENB)
891 zport->regs[4] |= PAR_ENA;
892 if (!(termios->c_cflag & PARODD))
893 zport->regs[4] |= PAR_EVEN;
894 switch (zport->clk_mode) {
895 case 64:
896 zport->regs[4] |= X64CLK;
897 break;
898 case 32:
899 zport->regs[4] |= X32CLK;
900 break;
901 case 16:
902 zport->regs[4] |= X16CLK;
903 break;
904 case 1:
905 zport->regs[4] |= X1CLK;
906 break;
907 default:
908 BUG();
909 }
910
911 baud = uart_get_baud_rate(uport, termios, old_termios, 0,
912 uport->uartclk / zport->clk_mode / 4);
913
914 brg = ZS_BPS_TO_BRG(baud, uport->uartclk / zport->clk_mode);
915 zport->regs[12] = brg & 0xff;
916 zport->regs[13] = (brg >> 8) & 0xff;
917
918 uart_update_timeout(uport, termios->c_cflag, baud);
919
920 uport->read_status_mask = Rx_OVR;
921 if (termios->c_iflag & INPCK)
922 uport->read_status_mask |= FRM_ERR | PAR_ERR;
923 if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
924 uport->read_status_mask |= Rx_BRK;
925
926 uport->ignore_status_mask = 0;
927 if (termios->c_iflag & IGNPAR)
928 uport->ignore_status_mask |= FRM_ERR | PAR_ERR;
929 if (termios->c_iflag & IGNBRK) {
930 uport->ignore_status_mask |= Rx_BRK;
931 if (termios->c_iflag & IGNPAR)
932 uport->ignore_status_mask |= Rx_OVR;
933 }
934
935 if (termios->c_cflag & CREAD)
936 zport->regs[3] |= RxENABLE;
937 else
938 zport->regs[3] &= ~RxENABLE;
939
940 if (zport != zport_a) {
941 if (!(termios->c_cflag & CLOCAL)) {
942 zport->regs[15] |= DCDIE;
943 } else
944 zport->regs[15] &= ~DCDIE;
945 if (termios->c_cflag & CRTSCTS) {
946 zport->regs[15] |= CTSIE;
947 } else
948 zport->regs[15] &= ~CTSIE;
949 zs_raw_xor_mctrl(zport);
950 }
951
952 /* Load up the new values. */
953 load_zsregs(zport, zport->regs, irq);
954
955 spin_unlock_irqrestore(&scc->zlock, flags);
956}
957
958/*
959 * Hack alert!
960 * Required solely so that the initial PROM-based console
961 * works undisturbed in parallel with this one.
962 */
963static void zs_pm(struct uart_port *uport, unsigned int state,
964 unsigned int oldstate)
965{
966 struct zs_port *zport = to_zport(uport);
967
968 if (state < 3)
969 zport->regs[5] |= TxENAB;
970 else
971 zport->regs[5] &= ~TxENAB;
972 write_zsreg(zport, R5, zport->regs[5]);
973}
974
975
976static const char *zs_type(struct uart_port *uport)
977{
978 return "Z85C30 SCC";
979}
980
981static void zs_release_port(struct uart_port *uport)
982{
983 iounmap(uport->membase);
984 uport->membase = NULL;
985 release_mem_region(uport->mapbase, ZS_CHAN_IO_SIZE);
986}
987
988static int zs_map_port(struct uart_port *uport)
989{
990 if (!uport->membase)
991 uport->membase = ioremap(uport->mapbase,
992 ZS_CHAN_IO_SIZE);
993 if (!uport->membase) {
994 printk(KERN_ERR "zs: Cannot map MMIO\n");
995 return -ENOMEM;
996 }
997 return 0;
998}
999
1000static int zs_request_port(struct uart_port *uport)
1001{
1002 int ret;
1003
1004 if (!request_mem_region(uport->mapbase, ZS_CHAN_IO_SIZE, "scc")) {
1005 printk(KERN_ERR "zs: Unable to reserve MMIO resource\n");
1006 return -EBUSY;
1007 }
1008 ret = zs_map_port(uport);
1009 if (ret) {
1010 release_mem_region(uport->mapbase, ZS_CHAN_IO_SIZE);
1011 return ret;
1012 }
1013 return 0;
1014}
1015
1016static void zs_config_port(struct uart_port *uport, int flags)
1017{
1018 struct zs_port *zport = to_zport(uport);
1019
1020 if (flags & UART_CONFIG_TYPE) {
1021 if (zs_request_port(uport))
1022 return;
1023
1024 uport->type = PORT_ZS;
1025
1026 zs_reset(zport);
1027 }
1028}
1029
1030static int zs_verify_port(struct uart_port *uport, struct serial_struct *ser)
1031{
1032 struct zs_port *zport = to_zport(uport);
1033 int ret = 0;
1034
1035 if (ser->type != PORT_UNKNOWN && ser->type != PORT_ZS)
1036 ret = -EINVAL;
1037 if (ser->irq != uport->irq)
1038 ret = -EINVAL;
1039 if (ser->baud_base != uport->uartclk / zport->clk_mode / 4)
1040 ret = -EINVAL;
1041 return ret;
1042}
1043
1044
1045static const struct uart_ops zs_ops = {
1046 .tx_empty = zs_tx_empty,
1047 .set_mctrl = zs_set_mctrl,
1048 .get_mctrl = zs_get_mctrl,
1049 .stop_tx = zs_stop_tx,
1050 .start_tx = zs_start_tx,
1051 .stop_rx = zs_stop_rx,
1052 .enable_ms = zs_enable_ms,
1053 .break_ctl = zs_break_ctl,
1054 .startup = zs_startup,
1055 .shutdown = zs_shutdown,
1056 .set_termios = zs_set_termios,
1057 .pm = zs_pm,
1058 .type = zs_type,
1059 .release_port = zs_release_port,
1060 .request_port = zs_request_port,
1061 .config_port = zs_config_port,
1062 .verify_port = zs_verify_port,
1063};
1064
1065/*
1066 * Initialize Z85C30 port structures.
1067 */
1068static int __init zs_probe_sccs(void)
1069{
1070 static int probed;
1071 struct zs_parms zs_parms;
1072 int chip, side, irq;
1073 int n_chips = 0;
1074 int i;
1075
1076 if (probed)
1077 return 0;
1078
1079 irq = dec_interrupt[DEC_IRQ_SCC0];
1080 if (irq >= 0) {
1081 zs_parms.scc[n_chips] = IOASIC_SCC0;
1082 zs_parms.irq[n_chips] = dec_interrupt[DEC_IRQ_SCC0];
1083 n_chips++;
1084 }
1085 irq = dec_interrupt[DEC_IRQ_SCC1];
1086 if (irq >= 0) {
1087 zs_parms.scc[n_chips] = IOASIC_SCC1;
1088 zs_parms.irq[n_chips] = dec_interrupt[DEC_IRQ_SCC1];
1089 n_chips++;
1090 }
1091 if (!n_chips)
1092 return -ENXIO;
1093
1094 probed = 1;
1095
1096 for (chip = 0; chip < n_chips; chip++) {
1097 spin_lock_init(&zs_sccs[chip].zlock);
1098 for (side = 0; side < ZS_NUM_CHAN; side++) {
1099 struct zs_port *zport = &zs_sccs[chip].zport[side];
1100 struct uart_port *uport = &zport->port;
1101
1102 zport->scc = &zs_sccs[chip];
1103 zport->clk_mode = 16;
1104
1105 uport->has_sysrq = IS_ENABLED(CONFIG_SERIAL_ZS_CONSOLE);
1106 uport->irq = zs_parms.irq[chip];
1107 uport->uartclk = ZS_CLOCK;
1108 uport->fifosize = 1;
1109 uport->iotype = UPIO_MEM;
1110 uport->flags = UPF_BOOT_AUTOCONF;
1111 uport->ops = &zs_ops;
1112 uport->line = chip * ZS_NUM_CHAN + side;
1113 uport->mapbase = dec_kn_slot_base +
1114 zs_parms.scc[chip] +
1115 (side ^ ZS_CHAN_B) * ZS_CHAN_IO_SIZE;
1116
1117 for (i = 0; i < ZS_NUM_REGS; i++)
1118 zport->regs[i] = zs_init_regs[i];
1119 }
1120 }
1121
1122 return 0;
1123}
1124
1125
1126#ifdef CONFIG_SERIAL_ZS_CONSOLE
1127static void zs_console_putchar(struct uart_port *uport, unsigned char ch)
1128{
1129 struct zs_port *zport = to_zport(uport);
1130 struct zs_scc *scc = zport->scc;
1131 int irq;
1132 unsigned long flags;
1133
1134 spin_lock_irqsave(&scc->zlock, flags);
1135 irq = !irqs_disabled_flags(flags);
1136 if (zs_transmit_drain(zport, irq))
1137 write_zsdata(zport, ch);
1138 spin_unlock_irqrestore(&scc->zlock, flags);
1139}
1140
1141/*
1142 * Print a string to the serial port trying not to disturb
1143 * any possible real use of the port...
1144 */
1145static void zs_console_write(struct console *co, const char *s,
1146 unsigned int count)
1147{
1148 int chip = co->index / ZS_NUM_CHAN, side = co->index % ZS_NUM_CHAN;
1149 struct zs_port *zport = &zs_sccs[chip].zport[side];
1150 struct zs_scc *scc = zport->scc;
1151 unsigned long flags;
1152 u8 txint, txenb;
1153 int irq;
1154
1155 /* Disable transmit interrupts and enable the transmitter. */
1156 spin_lock_irqsave(&scc->zlock, flags);
1157 txint = zport->regs[1];
1158 txenb = zport->regs[5];
1159 if (txint & TxINT_ENAB) {
1160 zport->regs[1] = txint & ~TxINT_ENAB;
1161 write_zsreg(zport, R1, zport->regs[1]);
1162 }
1163 if (!(txenb & TxENAB)) {
1164 zport->regs[5] = txenb | TxENAB;
1165 write_zsreg(zport, R5, zport->regs[5]);
1166 }
1167 spin_unlock_irqrestore(&scc->zlock, flags);
1168
1169 uart_console_write(&zport->port, s, count, zs_console_putchar);
1170
1171 /* Restore transmit interrupts and the transmitter enable. */
1172 spin_lock_irqsave(&scc->zlock, flags);
1173 irq = !irqs_disabled_flags(flags);
1174 zs_line_drain(zport, irq);
1175 if (!(txenb & TxENAB)) {
1176 zport->regs[5] &= ~TxENAB;
1177 write_zsreg(zport, R5, zport->regs[5]);
1178 }
1179 if (txint & TxINT_ENAB) {
1180 zport->regs[1] |= TxINT_ENAB;
1181 write_zsreg(zport, R1, zport->regs[1]);
1182
1183 /* Resume any transmission as the TxIP bit won't be set. */
1184 if (!zport->tx_stopped)
1185 zs_raw_transmit_chars(zport);
1186 }
1187 spin_unlock_irqrestore(&scc->zlock, flags);
1188}
1189
1190/*
1191 * Setup serial console baud/bits/parity. We do two things here:
1192 * - construct a cflag setting for the first uart_open()
1193 * - initialise the serial port
1194 * Return non-zero if we didn't find a serial port.
1195 */
1196static int __init zs_console_setup(struct console *co, char *options)
1197{
1198 int chip = co->index / ZS_NUM_CHAN, side = co->index % ZS_NUM_CHAN;
1199 struct zs_port *zport = &zs_sccs[chip].zport[side];
1200 struct uart_port *uport = &zport->port;
1201 int baud = 9600;
1202 int bits = 8;
1203 int parity = 'n';
1204 int flow = 'n';
1205 int ret;
1206
1207 ret = zs_map_port(uport);
1208 if (ret)
1209 return ret;
1210
1211 zs_reset(zport);
1212 zs_pm(uport, 0, -1);
1213
1214 if (options)
1215 uart_parse_options(options, &baud, &parity, &bits, &flow);
1216 return uart_set_options(uport, co, baud, parity, bits, flow);
1217}
1218
1219static struct uart_driver zs_reg;
1220static struct console zs_console = {
1221 .name = "ttyS",
1222 .write = zs_console_write,
1223 .device = uart_console_device,
1224 .setup = zs_console_setup,
1225 .flags = CON_PRINTBUFFER,
1226 .index = -1,
1227 .data = &zs_reg,
1228};
1229
1230/*
1231 * Register console.
1232 */
1233static int __init zs_serial_console_init(void)
1234{
1235 int ret;
1236
1237 ret = zs_probe_sccs();
1238 if (ret)
1239 return ret;
1240 register_console(&zs_console);
1241
1242 return 0;
1243}
1244
1245console_initcall(zs_serial_console_init);
1246
1247#define SERIAL_ZS_CONSOLE &zs_console
1248#else
1249#define SERIAL_ZS_CONSOLE NULL
1250#endif /* CONFIG_SERIAL_ZS_CONSOLE */
1251
1252static struct uart_driver zs_reg = {
1253 .owner = THIS_MODULE,
1254 .driver_name = "serial",
1255 .dev_name = "ttyS",
1256 .major = TTY_MAJOR,
1257 .minor = 64,
1258 .nr = ZS_NUM_SCCS * ZS_NUM_CHAN,
1259 .cons = SERIAL_ZS_CONSOLE,
1260};
1261
1262/* zs_init inits the driver. */
1263static int __init zs_init(void)
1264{
1265 int i, ret;
1266
1267 pr_info("%s%s\n", zs_name, zs_version);
1268
1269 /* Find out how many Z85C30 SCCs we have. */
1270 ret = zs_probe_sccs();
1271 if (ret)
1272 return ret;
1273
1274 ret = uart_register_driver(&zs_reg);
1275 if (ret)
1276 return ret;
1277
1278 for (i = 0; i < ZS_NUM_SCCS * ZS_NUM_CHAN; i++) {
1279 struct zs_scc *scc = &zs_sccs[i / ZS_NUM_CHAN];
1280 struct zs_port *zport = &scc->zport[i % ZS_NUM_CHAN];
1281 struct uart_port *uport = &zport->port;
1282
1283 if (zport->scc)
1284 uart_add_one_port(&zs_reg, uport);
1285 }
1286
1287 return 0;
1288}
1289
1290static void __exit zs_exit(void)
1291{
1292 int i;
1293
1294 for (i = ZS_NUM_SCCS * ZS_NUM_CHAN - 1; i >= 0; i--) {
1295 struct zs_scc *scc = &zs_sccs[i / ZS_NUM_CHAN];
1296 struct zs_port *zport = &scc->zport[i % ZS_NUM_CHAN];
1297 struct uart_port *uport = &zport->port;
1298
1299 if (zport->scc)
1300 uart_remove_one_port(&zs_reg, uport);
1301 }
1302
1303 uart_unregister_driver(&zs_reg);
1304}
1305
1306module_init(zs_init);
1307module_exit(zs_exit);
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * zs.c: Serial port driver for IOASIC DECstations.
4 *
5 * Derived from drivers/sbus/char/sunserial.c by Paul Mackerras.
6 * Derived from drivers/macintosh/macserial.c by Harald Koerfgen.
7 *
8 * DECstation changes
9 * Copyright (C) 1998-2000 Harald Koerfgen
10 * Copyright (C) 2000, 2001, 2002, 2003, 2004, 2005, 2007 Maciej W. Rozycki
11 *
12 * For the rest of the code the original Copyright applies:
13 * Copyright (C) 1996 Paul Mackerras (Paul.Mackerras@cs.anu.edu.au)
14 * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
15 *
16 *
17 * Note: for IOASIC systems the wiring is as follows:
18 *
19 * mouse/keyboard:
20 * DIN-7 MJ-4 signal SCC
21 * 2 1 TxD <- A.TxD
22 * 3 4 RxD -> A.RxD
23 *
24 * EIA-232/EIA-423:
25 * DB-25 MMJ-6 signal SCC
26 * 2 2 TxD <- B.TxD
27 * 3 5 RxD -> B.RxD
28 * 4 RTS <- ~A.RTS
29 * 5 CTS -> ~B.CTS
30 * 6 6 DSR -> ~A.SYNC
31 * 8 CD -> ~B.DCD
32 * 12 DSRS(DCE) -> ~A.CTS (*)
33 * 15 TxC -> B.TxC
34 * 17 RxC -> B.RxC
35 * 20 1 DTR <- ~A.DTR
36 * 22 RI -> ~A.DCD
37 * 23 DSRS(DTE) <- ~B.RTS
38 *
39 * (*) EIA-232 defines the signal at this pin to be SCD, while DSRS(DCE)
40 * is shared with DSRS(DTE) at pin 23.
41 *
42 * As you can immediately notice the wiring of the RTS, DTR and DSR signals
43 * is a bit odd. This makes the handling of port B unnecessarily
44 * complicated and prevents the use of some automatic modes of operation.
45 */
46
47#if defined(CONFIG_SERIAL_ZS_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
48#define SUPPORT_SYSRQ
49#endif
50
51#include <linux/bug.h>
52#include <linux/console.h>
53#include <linux/delay.h>
54#include <linux/errno.h>
55#include <linux/init.h>
56#include <linux/interrupt.h>
57#include <linux/io.h>
58#include <linux/ioport.h>
59#include <linux/irqflags.h>
60#include <linux/kernel.h>
61#include <linux/module.h>
62#include <linux/major.h>
63#include <linux/serial.h>
64#include <linux/serial_core.h>
65#include <linux/spinlock.h>
66#include <linux/sysrq.h>
67#include <linux/tty.h>
68#include <linux/tty_flip.h>
69#include <linux/types.h>
70
71#include <linux/atomic.h>
72
73#include <asm/dec/interrupts.h>
74#include <asm/dec/ioasic_addrs.h>
75#include <asm/dec/system.h>
76
77#include "zs.h"
78
79
80MODULE_AUTHOR("Maciej W. Rozycki <macro@linux-mips.org>");
81MODULE_DESCRIPTION("DECstation Z85C30 serial driver");
82MODULE_LICENSE("GPL");
83
84
85static char zs_name[] __initdata = "DECstation Z85C30 serial driver version ";
86static char zs_version[] __initdata = "0.10";
87
88/*
89 * It would be nice to dynamically allocate everything that
90 * depends on ZS_NUM_SCCS, so we could support any number of
91 * Z85C30s, but for now...
92 */
93#define ZS_NUM_SCCS 2 /* Max # of ZS chips supported. */
94#define ZS_NUM_CHAN 2 /* 2 channels per chip. */
95#define ZS_CHAN_A 0 /* Index of the channel A. */
96#define ZS_CHAN_B 1 /* Index of the channel B. */
97#define ZS_CHAN_IO_SIZE 8 /* IOMEM space size. */
98#define ZS_CHAN_IO_STRIDE 4 /* Register alignment. */
99#define ZS_CHAN_IO_OFFSET 1 /* The SCC resides on the high byte
100 of the 16-bit IOBUS. */
101#define ZS_CLOCK 7372800 /* Z85C30 PCLK input clock rate. */
102
103#define to_zport(uport) container_of(uport, struct zs_port, port)
104
105struct zs_parms {
106 resource_size_t scc[ZS_NUM_SCCS];
107 int irq[ZS_NUM_SCCS];
108};
109
110static struct zs_scc zs_sccs[ZS_NUM_SCCS];
111
112static u8 zs_init_regs[ZS_NUM_REGS] __initdata = {
113 0, /* write 0 */
114 PAR_SPEC, /* write 1 */
115 0, /* write 2 */
116 0, /* write 3 */
117 X16CLK | SB1, /* write 4 */
118 0, /* write 5 */
119 0, 0, 0, /* write 6, 7, 8 */
120 MIE | DLC | NV, /* write 9 */
121 NRZ, /* write 10 */
122 TCBR | RCBR, /* write 11 */
123 0, 0, /* BRG time constant, write 12 + 13 */
124 BRSRC | BRENABL, /* write 14 */
125 0, /* write 15 */
126};
127
128/*
129 * Debugging.
130 */
131#undef ZS_DEBUG_REGS
132
133
134/*
135 * Reading and writing Z85C30 registers.
136 */
137static void recovery_delay(void)
138{
139 udelay(2);
140}
141
142static u8 read_zsreg(struct zs_port *zport, int reg)
143{
144 void __iomem *control = zport->port.membase + ZS_CHAN_IO_OFFSET;
145 u8 retval;
146
147 if (reg != 0) {
148 writeb(reg & 0xf, control);
149 fast_iob();
150 recovery_delay();
151 }
152 retval = readb(control);
153 recovery_delay();
154 return retval;
155}
156
157static void write_zsreg(struct zs_port *zport, int reg, u8 value)
158{
159 void __iomem *control = zport->port.membase + ZS_CHAN_IO_OFFSET;
160
161 if (reg != 0) {
162 writeb(reg & 0xf, control);
163 fast_iob(); recovery_delay();
164 }
165 writeb(value, control);
166 fast_iob();
167 recovery_delay();
168 return;
169}
170
171static u8 read_zsdata(struct zs_port *zport)
172{
173 void __iomem *data = zport->port.membase +
174 ZS_CHAN_IO_STRIDE + ZS_CHAN_IO_OFFSET;
175 u8 retval;
176
177 retval = readb(data);
178 recovery_delay();
179 return retval;
180}
181
182static void write_zsdata(struct zs_port *zport, u8 value)
183{
184 void __iomem *data = zport->port.membase +
185 ZS_CHAN_IO_STRIDE + ZS_CHAN_IO_OFFSET;
186
187 writeb(value, data);
188 fast_iob();
189 recovery_delay();
190 return;
191}
192
193#ifdef ZS_DEBUG_REGS
194void zs_dump(void)
195{
196 struct zs_port *zport;
197 int i, j;
198
199 for (i = 0; i < ZS_NUM_SCCS * ZS_NUM_CHAN; i++) {
200 zport = &zs_sccs[i / ZS_NUM_CHAN].zport[i % ZS_NUM_CHAN];
201
202 if (!zport->scc)
203 continue;
204
205 for (j = 0; j < 16; j++)
206 printk("W%-2d = 0x%02x\t", j, zport->regs[j]);
207 printk("\n");
208 for (j = 0; j < 16; j++)
209 printk("R%-2d = 0x%02x\t", j, read_zsreg(zport, j));
210 printk("\n\n");
211 }
212}
213#endif
214
215
216static void zs_spin_lock_cond_irq(spinlock_t *lock, int irq)
217{
218 if (irq)
219 spin_lock_irq(lock);
220 else
221 spin_lock(lock);
222}
223
224static void zs_spin_unlock_cond_irq(spinlock_t *lock, int irq)
225{
226 if (irq)
227 spin_unlock_irq(lock);
228 else
229 spin_unlock(lock);
230}
231
232static int zs_receive_drain(struct zs_port *zport)
233{
234 int loops = 10000;
235
236 while ((read_zsreg(zport, R0) & Rx_CH_AV) && --loops)
237 read_zsdata(zport);
238 return loops;
239}
240
241static int zs_transmit_drain(struct zs_port *zport, int irq)
242{
243 struct zs_scc *scc = zport->scc;
244 int loops = 10000;
245
246 while (!(read_zsreg(zport, R0) & Tx_BUF_EMP) && --loops) {
247 zs_spin_unlock_cond_irq(&scc->zlock, irq);
248 udelay(2);
249 zs_spin_lock_cond_irq(&scc->zlock, irq);
250 }
251 return loops;
252}
253
254static int zs_line_drain(struct zs_port *zport, int irq)
255{
256 struct zs_scc *scc = zport->scc;
257 int loops = 10000;
258
259 while (!(read_zsreg(zport, R1) & ALL_SNT) && --loops) {
260 zs_spin_unlock_cond_irq(&scc->zlock, irq);
261 udelay(2);
262 zs_spin_lock_cond_irq(&scc->zlock, irq);
263 }
264 return loops;
265}
266
267
268static void load_zsregs(struct zs_port *zport, u8 *regs, int irq)
269{
270 /* Let the current transmission finish. */
271 zs_line_drain(zport, irq);
272 /* Load 'em up. */
273 write_zsreg(zport, R3, regs[3] & ~RxENABLE);
274 write_zsreg(zport, R5, regs[5] & ~TxENAB);
275 write_zsreg(zport, R4, regs[4]);
276 write_zsreg(zport, R9, regs[9]);
277 write_zsreg(zport, R1, regs[1]);
278 write_zsreg(zport, R2, regs[2]);
279 write_zsreg(zport, R10, regs[10]);
280 write_zsreg(zport, R14, regs[14] & ~BRENABL);
281 write_zsreg(zport, R11, regs[11]);
282 write_zsreg(zport, R12, regs[12]);
283 write_zsreg(zport, R13, regs[13]);
284 write_zsreg(zport, R14, regs[14]);
285 write_zsreg(zport, R15, regs[15]);
286 if (regs[3] & RxENABLE)
287 write_zsreg(zport, R3, regs[3]);
288 if (regs[5] & TxENAB)
289 write_zsreg(zport, R5, regs[5]);
290 return;
291}
292
293
294/*
295 * Status handling routines.
296 */
297
298/*
299 * zs_tx_empty() -- get the transmitter empty status
300 *
301 * Purpose: Let user call ioctl() to get info when the UART physically
302 * is emptied. On bus types like RS485, the transmitter must
303 * release the bus after transmitting. This must be done when
304 * the transmit shift register is empty, not be done when the
305 * transmit holding register is empty. This functionality
306 * allows an RS485 driver to be written in user space.
307 */
308static unsigned int zs_tx_empty(struct uart_port *uport)
309{
310 struct zs_port *zport = to_zport(uport);
311 struct zs_scc *scc = zport->scc;
312 unsigned long flags;
313 u8 status;
314
315 spin_lock_irqsave(&scc->zlock, flags);
316 status = read_zsreg(zport, R1);
317 spin_unlock_irqrestore(&scc->zlock, flags);
318
319 return status & ALL_SNT ? TIOCSER_TEMT : 0;
320}
321
322static unsigned int zs_raw_get_ab_mctrl(struct zs_port *zport_a,
323 struct zs_port *zport_b)
324{
325 u8 status_a, status_b;
326 unsigned int mctrl;
327
328 status_a = read_zsreg(zport_a, R0);
329 status_b = read_zsreg(zport_b, R0);
330
331 mctrl = ((status_b & CTS) ? TIOCM_CTS : 0) |
332 ((status_b & DCD) ? TIOCM_CAR : 0) |
333 ((status_a & DCD) ? TIOCM_RNG : 0) |
334 ((status_a & SYNC_HUNT) ? TIOCM_DSR : 0);
335
336 return mctrl;
337}
338
339static unsigned int zs_raw_get_mctrl(struct zs_port *zport)
340{
341 struct zs_port *zport_a = &zport->scc->zport[ZS_CHAN_A];
342
343 return zport != zport_a ? zs_raw_get_ab_mctrl(zport_a, zport) : 0;
344}
345
346static unsigned int zs_raw_xor_mctrl(struct zs_port *zport)
347{
348 struct zs_port *zport_a = &zport->scc->zport[ZS_CHAN_A];
349 unsigned int mmask, mctrl, delta;
350 u8 mask_a, mask_b;
351
352 if (zport == zport_a)
353 return 0;
354
355 mask_a = zport_a->regs[15];
356 mask_b = zport->regs[15];
357
358 mmask = ((mask_b & CTSIE) ? TIOCM_CTS : 0) |
359 ((mask_b & DCDIE) ? TIOCM_CAR : 0) |
360 ((mask_a & DCDIE) ? TIOCM_RNG : 0) |
361 ((mask_a & SYNCIE) ? TIOCM_DSR : 0);
362
363 mctrl = zport->mctrl;
364 if (mmask) {
365 mctrl &= ~mmask;
366 mctrl |= zs_raw_get_ab_mctrl(zport_a, zport) & mmask;
367 }
368
369 delta = mctrl ^ zport->mctrl;
370 if (delta)
371 zport->mctrl = mctrl;
372
373 return delta;
374}
375
376static unsigned int zs_get_mctrl(struct uart_port *uport)
377{
378 struct zs_port *zport = to_zport(uport);
379 struct zs_scc *scc = zport->scc;
380 unsigned int mctrl;
381
382 spin_lock(&scc->zlock);
383 mctrl = zs_raw_get_mctrl(zport);
384 spin_unlock(&scc->zlock);
385
386 return mctrl;
387}
388
389static void zs_set_mctrl(struct uart_port *uport, unsigned int mctrl)
390{
391 struct zs_port *zport = to_zport(uport);
392 struct zs_scc *scc = zport->scc;
393 struct zs_port *zport_a = &scc->zport[ZS_CHAN_A];
394 u8 oldloop, newloop;
395
396 spin_lock(&scc->zlock);
397 if (zport != zport_a) {
398 if (mctrl & TIOCM_DTR)
399 zport_a->regs[5] |= DTR;
400 else
401 zport_a->regs[5] &= ~DTR;
402 if (mctrl & TIOCM_RTS)
403 zport_a->regs[5] |= RTS;
404 else
405 zport_a->regs[5] &= ~RTS;
406 write_zsreg(zport_a, R5, zport_a->regs[5]);
407 }
408
409 /* Rarely modified, so don't poke at hardware unless necessary. */
410 oldloop = zport->regs[14];
411 newloop = oldloop;
412 if (mctrl & TIOCM_LOOP)
413 newloop |= LOOPBAK;
414 else
415 newloop &= ~LOOPBAK;
416 if (newloop != oldloop) {
417 zport->regs[14] = newloop;
418 write_zsreg(zport, R14, zport->regs[14]);
419 }
420 spin_unlock(&scc->zlock);
421}
422
423static void zs_raw_stop_tx(struct zs_port *zport)
424{
425 write_zsreg(zport, R0, RES_Tx_P);
426 zport->tx_stopped = 1;
427}
428
429static void zs_stop_tx(struct uart_port *uport)
430{
431 struct zs_port *zport = to_zport(uport);
432 struct zs_scc *scc = zport->scc;
433
434 spin_lock(&scc->zlock);
435 zs_raw_stop_tx(zport);
436 spin_unlock(&scc->zlock);
437}
438
439static void zs_raw_transmit_chars(struct zs_port *);
440
441static void zs_start_tx(struct uart_port *uport)
442{
443 struct zs_port *zport = to_zport(uport);
444 struct zs_scc *scc = zport->scc;
445
446 spin_lock(&scc->zlock);
447 if (zport->tx_stopped) {
448 zs_transmit_drain(zport, 0);
449 zport->tx_stopped = 0;
450 zs_raw_transmit_chars(zport);
451 }
452 spin_unlock(&scc->zlock);
453}
454
455static void zs_stop_rx(struct uart_port *uport)
456{
457 struct zs_port *zport = to_zport(uport);
458 struct zs_scc *scc = zport->scc;
459 struct zs_port *zport_a = &scc->zport[ZS_CHAN_A];
460
461 spin_lock(&scc->zlock);
462 zport->regs[15] &= ~BRKIE;
463 zport->regs[1] &= ~(RxINT_MASK | TxINT_ENAB);
464 zport->regs[1] |= RxINT_DISAB;
465
466 if (zport != zport_a) {
467 /* A-side DCD tracks RI and SYNC tracks DSR. */
468 zport_a->regs[15] &= ~(DCDIE | SYNCIE);
469 write_zsreg(zport_a, R15, zport_a->regs[15]);
470 if (!(zport_a->regs[15] & BRKIE)) {
471 zport_a->regs[1] &= ~EXT_INT_ENAB;
472 write_zsreg(zport_a, R1, zport_a->regs[1]);
473 }
474
475 /* This-side DCD tracks DCD and CTS tracks CTS. */
476 zport->regs[15] &= ~(DCDIE | CTSIE);
477 zport->regs[1] &= ~EXT_INT_ENAB;
478 } else {
479 /* DCD tracks RI and SYNC tracks DSR for the B side. */
480 if (!(zport->regs[15] & (DCDIE | SYNCIE)))
481 zport->regs[1] &= ~EXT_INT_ENAB;
482 }
483
484 write_zsreg(zport, R15, zport->regs[15]);
485 write_zsreg(zport, R1, zport->regs[1]);
486 spin_unlock(&scc->zlock);
487}
488
489static void zs_enable_ms(struct uart_port *uport)
490{
491 struct zs_port *zport = to_zport(uport);
492 struct zs_scc *scc = zport->scc;
493 struct zs_port *zport_a = &scc->zport[ZS_CHAN_A];
494
495 if (zport == zport_a)
496 return;
497
498 spin_lock(&scc->zlock);
499
500 /* Clear Ext interrupts if not being handled already. */
501 if (!(zport_a->regs[1] & EXT_INT_ENAB))
502 write_zsreg(zport_a, R0, RES_EXT_INT);
503
504 /* A-side DCD tracks RI and SYNC tracks DSR. */
505 zport_a->regs[1] |= EXT_INT_ENAB;
506 zport_a->regs[15] |= DCDIE | SYNCIE;
507
508 /* This-side DCD tracks DCD and CTS tracks CTS. */
509 zport->regs[15] |= DCDIE | CTSIE;
510
511 zs_raw_xor_mctrl(zport);
512
513 write_zsreg(zport_a, R1, zport_a->regs[1]);
514 write_zsreg(zport_a, R15, zport_a->regs[15]);
515 write_zsreg(zport, R15, zport->regs[15]);
516 spin_unlock(&scc->zlock);
517}
518
519static void zs_break_ctl(struct uart_port *uport, int break_state)
520{
521 struct zs_port *zport = to_zport(uport);
522 struct zs_scc *scc = zport->scc;
523 unsigned long flags;
524
525 spin_lock_irqsave(&scc->zlock, flags);
526 if (break_state == -1)
527 zport->regs[5] |= SND_BRK;
528 else
529 zport->regs[5] &= ~SND_BRK;
530 write_zsreg(zport, R5, zport->regs[5]);
531 spin_unlock_irqrestore(&scc->zlock, flags);
532}
533
534
535/*
536 * Interrupt handling routines.
537 */
538#define Rx_BRK 0x0100 /* BREAK event software flag. */
539#define Rx_SYS 0x0200 /* SysRq event software flag. */
540
541static void zs_receive_chars(struct zs_port *zport)
542{
543 struct uart_port *uport = &zport->port;
544 struct zs_scc *scc = zport->scc;
545 struct uart_icount *icount;
546 unsigned int avail, status, ch, flag;
547 int count;
548
549 for (count = 16; count; count--) {
550 spin_lock(&scc->zlock);
551 avail = read_zsreg(zport, R0) & Rx_CH_AV;
552 spin_unlock(&scc->zlock);
553 if (!avail)
554 break;
555
556 spin_lock(&scc->zlock);
557 status = read_zsreg(zport, R1) & (Rx_OVR | FRM_ERR | PAR_ERR);
558 ch = read_zsdata(zport);
559 spin_unlock(&scc->zlock);
560
561 flag = TTY_NORMAL;
562
563 icount = &uport->icount;
564 icount->rx++;
565
566 /* Handle the null char got when BREAK is removed. */
567 if (!ch)
568 status |= zport->tty_break;
569 if (unlikely(status &
570 (Rx_OVR | FRM_ERR | PAR_ERR | Rx_SYS | Rx_BRK))) {
571 zport->tty_break = 0;
572
573 /* Reset the error indication. */
574 if (status & (Rx_OVR | FRM_ERR | PAR_ERR)) {
575 spin_lock(&scc->zlock);
576 write_zsreg(zport, R0, ERR_RES);
577 spin_unlock(&scc->zlock);
578 }
579
580 if (status & (Rx_SYS | Rx_BRK)) {
581 icount->brk++;
582 /* SysRq discards the null char. */
583 if (status & Rx_SYS)
584 continue;
585 } else if (status & FRM_ERR)
586 icount->frame++;
587 else if (status & PAR_ERR)
588 icount->parity++;
589 if (status & Rx_OVR)
590 icount->overrun++;
591
592 status &= uport->read_status_mask;
593 if (status & Rx_BRK)
594 flag = TTY_BREAK;
595 else if (status & FRM_ERR)
596 flag = TTY_FRAME;
597 else if (status & PAR_ERR)
598 flag = TTY_PARITY;
599 }
600
601 if (uart_handle_sysrq_char(uport, ch))
602 continue;
603
604 uart_insert_char(uport, status, Rx_OVR, ch, flag);
605 }
606
607 tty_flip_buffer_push(&uport->state->port);
608}
609
610static void zs_raw_transmit_chars(struct zs_port *zport)
611{
612 struct circ_buf *xmit = &zport->port.state->xmit;
613
614 /* XON/XOFF chars. */
615 if (zport->port.x_char) {
616 write_zsdata(zport, zport->port.x_char);
617 zport->port.icount.tx++;
618 zport->port.x_char = 0;
619 return;
620 }
621
622 /* If nothing to do or stopped or hardware stopped. */
623 if (uart_circ_empty(xmit) || uart_tx_stopped(&zport->port)) {
624 zs_raw_stop_tx(zport);
625 return;
626 }
627
628 /* Send char. */
629 write_zsdata(zport, xmit->buf[xmit->tail]);
630 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
631 zport->port.icount.tx++;
632
633 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
634 uart_write_wakeup(&zport->port);
635
636 /* Are we are done? */
637 if (uart_circ_empty(xmit))
638 zs_raw_stop_tx(zport);
639}
640
641static void zs_transmit_chars(struct zs_port *zport)
642{
643 struct zs_scc *scc = zport->scc;
644
645 spin_lock(&scc->zlock);
646 zs_raw_transmit_chars(zport);
647 spin_unlock(&scc->zlock);
648}
649
650static void zs_status_handle(struct zs_port *zport, struct zs_port *zport_a)
651{
652 struct uart_port *uport = &zport->port;
653 struct zs_scc *scc = zport->scc;
654 unsigned int delta;
655 u8 status, brk;
656
657 spin_lock(&scc->zlock);
658
659 /* Get status from Read Register 0. */
660 status = read_zsreg(zport, R0);
661
662 if (zport->regs[15] & BRKIE) {
663 brk = status & BRK_ABRT;
664 if (brk && !zport->brk) {
665 spin_unlock(&scc->zlock);
666 if (uart_handle_break(uport))
667 zport->tty_break = Rx_SYS;
668 else
669 zport->tty_break = Rx_BRK;
670 spin_lock(&scc->zlock);
671 }
672 zport->brk = brk;
673 }
674
675 if (zport != zport_a) {
676 delta = zs_raw_xor_mctrl(zport);
677 spin_unlock(&scc->zlock);
678
679 if (delta & TIOCM_CTS)
680 uart_handle_cts_change(uport,
681 zport->mctrl & TIOCM_CTS);
682 if (delta & TIOCM_CAR)
683 uart_handle_dcd_change(uport,
684 zport->mctrl & TIOCM_CAR);
685 if (delta & TIOCM_RNG)
686 uport->icount.dsr++;
687 if (delta & TIOCM_DSR)
688 uport->icount.rng++;
689
690 if (delta)
691 wake_up_interruptible(&uport->state->port.delta_msr_wait);
692
693 spin_lock(&scc->zlock);
694 }
695
696 /* Clear the status condition... */
697 write_zsreg(zport, R0, RES_EXT_INT);
698
699 spin_unlock(&scc->zlock);
700}
701
702/*
703 * This is the Z85C30 driver's generic interrupt routine.
704 */
705static irqreturn_t zs_interrupt(int irq, void *dev_id)
706{
707 struct zs_scc *scc = dev_id;
708 struct zs_port *zport_a = &scc->zport[ZS_CHAN_A];
709 struct zs_port *zport_b = &scc->zport[ZS_CHAN_B];
710 irqreturn_t status = IRQ_NONE;
711 u8 zs_intreg;
712 int count;
713
714 /*
715 * NOTE: The read register 3, which holds the irq status,
716 * does so for both channels on each chip. Although
717 * the status value itself must be read from the A
718 * channel and is only valid when read from channel A.
719 * Yes... broken hardware...
720 */
721 for (count = 16; count; count--) {
722 spin_lock(&scc->zlock);
723 zs_intreg = read_zsreg(zport_a, R3);
724 spin_unlock(&scc->zlock);
725 if (!zs_intreg)
726 break;
727
728 /*
729 * We do not like losing characters, so we prioritise
730 * interrupt sources a little bit differently than
731 * the SCC would, was it allowed to.
732 */
733 if (zs_intreg & CHBRxIP)
734 zs_receive_chars(zport_b);
735 if (zs_intreg & CHARxIP)
736 zs_receive_chars(zport_a);
737 if (zs_intreg & CHBEXT)
738 zs_status_handle(zport_b, zport_a);
739 if (zs_intreg & CHAEXT)
740 zs_status_handle(zport_a, zport_a);
741 if (zs_intreg & CHBTxIP)
742 zs_transmit_chars(zport_b);
743 if (zs_intreg & CHATxIP)
744 zs_transmit_chars(zport_a);
745
746 status = IRQ_HANDLED;
747 }
748
749 return status;
750}
751
752
753/*
754 * Finally, routines used to initialize the serial port.
755 */
756static int zs_startup(struct uart_port *uport)
757{
758 struct zs_port *zport = to_zport(uport);
759 struct zs_scc *scc = zport->scc;
760 unsigned long flags;
761 int irq_guard;
762 int ret;
763
764 irq_guard = atomic_add_return(1, &scc->irq_guard);
765 if (irq_guard == 1) {
766 ret = request_irq(zport->port.irq, zs_interrupt,
767 IRQF_SHARED, "scc", scc);
768 if (ret) {
769 atomic_add(-1, &scc->irq_guard);
770 printk(KERN_ERR "zs: can't get irq %d\n",
771 zport->port.irq);
772 return ret;
773 }
774 }
775
776 spin_lock_irqsave(&scc->zlock, flags);
777
778 /* Clear the receive FIFO. */
779 zs_receive_drain(zport);
780
781 /* Clear the interrupt registers. */
782 write_zsreg(zport, R0, ERR_RES);
783 write_zsreg(zport, R0, RES_Tx_P);
784 /* But Ext only if not being handled already. */
785 if (!(zport->regs[1] & EXT_INT_ENAB))
786 write_zsreg(zport, R0, RES_EXT_INT);
787
788 /* Finally, enable sequencing and interrupts. */
789 zport->regs[1] &= ~RxINT_MASK;
790 zport->regs[1] |= RxINT_ALL | TxINT_ENAB | EXT_INT_ENAB;
791 zport->regs[3] |= RxENABLE;
792 zport->regs[15] |= BRKIE;
793 write_zsreg(zport, R1, zport->regs[1]);
794 write_zsreg(zport, R3, zport->regs[3]);
795 write_zsreg(zport, R5, zport->regs[5]);
796 write_zsreg(zport, R15, zport->regs[15]);
797
798 /* Record the current state of RR0. */
799 zport->mctrl = zs_raw_get_mctrl(zport);
800 zport->brk = read_zsreg(zport, R0) & BRK_ABRT;
801
802 zport->tx_stopped = 1;
803
804 spin_unlock_irqrestore(&scc->zlock, flags);
805
806 return 0;
807}
808
809static void zs_shutdown(struct uart_port *uport)
810{
811 struct zs_port *zport = to_zport(uport);
812 struct zs_scc *scc = zport->scc;
813 unsigned long flags;
814 int irq_guard;
815
816 spin_lock_irqsave(&scc->zlock, flags);
817
818 zport->regs[3] &= ~RxENABLE;
819 write_zsreg(zport, R5, zport->regs[5]);
820 write_zsreg(zport, R3, zport->regs[3]);
821
822 spin_unlock_irqrestore(&scc->zlock, flags);
823
824 irq_guard = atomic_add_return(-1, &scc->irq_guard);
825 if (!irq_guard)
826 free_irq(zport->port.irq, scc);
827}
828
829
830static void zs_reset(struct zs_port *zport)
831{
832 struct zs_scc *scc = zport->scc;
833 int irq;
834 unsigned long flags;
835
836 spin_lock_irqsave(&scc->zlock, flags);
837 irq = !irqs_disabled_flags(flags);
838 if (!scc->initialised) {
839 /* Reset the pointer first, just in case... */
840 read_zsreg(zport, R0);
841 /* And let the current transmission finish. */
842 zs_line_drain(zport, irq);
843 write_zsreg(zport, R9, FHWRES);
844 udelay(10);
845 write_zsreg(zport, R9, 0);
846 scc->initialised = 1;
847 }
848 load_zsregs(zport, zport->regs, irq);
849 spin_unlock_irqrestore(&scc->zlock, flags);
850}
851
852static void zs_set_termios(struct uart_port *uport, struct ktermios *termios,
853 struct ktermios *old_termios)
854{
855 struct zs_port *zport = to_zport(uport);
856 struct zs_scc *scc = zport->scc;
857 struct zs_port *zport_a = &scc->zport[ZS_CHAN_A];
858 int irq;
859 unsigned int baud, brg;
860 unsigned long flags;
861
862 spin_lock_irqsave(&scc->zlock, flags);
863 irq = !irqs_disabled_flags(flags);
864
865 /* Byte size. */
866 zport->regs[3] &= ~RxNBITS_MASK;
867 zport->regs[5] &= ~TxNBITS_MASK;
868 switch (termios->c_cflag & CSIZE) {
869 case CS5:
870 zport->regs[3] |= Rx5;
871 zport->regs[5] |= Tx5;
872 break;
873 case CS6:
874 zport->regs[3] |= Rx6;
875 zport->regs[5] |= Tx6;
876 break;
877 case CS7:
878 zport->regs[3] |= Rx7;
879 zport->regs[5] |= Tx7;
880 break;
881 case CS8:
882 default:
883 zport->regs[3] |= Rx8;
884 zport->regs[5] |= Tx8;
885 break;
886 }
887
888 /* Parity and stop bits. */
889 zport->regs[4] &= ~(XCLK_MASK | SB_MASK | PAR_ENA | PAR_EVEN);
890 if (termios->c_cflag & CSTOPB)
891 zport->regs[4] |= SB2;
892 else
893 zport->regs[4] |= SB1;
894 if (termios->c_cflag & PARENB)
895 zport->regs[4] |= PAR_ENA;
896 if (!(termios->c_cflag & PARODD))
897 zport->regs[4] |= PAR_EVEN;
898 switch (zport->clk_mode) {
899 case 64:
900 zport->regs[4] |= X64CLK;
901 break;
902 case 32:
903 zport->regs[4] |= X32CLK;
904 break;
905 case 16:
906 zport->regs[4] |= X16CLK;
907 break;
908 case 1:
909 zport->regs[4] |= X1CLK;
910 break;
911 default:
912 BUG();
913 }
914
915 baud = uart_get_baud_rate(uport, termios, old_termios, 0,
916 uport->uartclk / zport->clk_mode / 4);
917
918 brg = ZS_BPS_TO_BRG(baud, uport->uartclk / zport->clk_mode);
919 zport->regs[12] = brg & 0xff;
920 zport->regs[13] = (brg >> 8) & 0xff;
921
922 uart_update_timeout(uport, termios->c_cflag, baud);
923
924 uport->read_status_mask = Rx_OVR;
925 if (termios->c_iflag & INPCK)
926 uport->read_status_mask |= FRM_ERR | PAR_ERR;
927 if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
928 uport->read_status_mask |= Rx_BRK;
929
930 uport->ignore_status_mask = 0;
931 if (termios->c_iflag & IGNPAR)
932 uport->ignore_status_mask |= FRM_ERR | PAR_ERR;
933 if (termios->c_iflag & IGNBRK) {
934 uport->ignore_status_mask |= Rx_BRK;
935 if (termios->c_iflag & IGNPAR)
936 uport->ignore_status_mask |= Rx_OVR;
937 }
938
939 if (termios->c_cflag & CREAD)
940 zport->regs[3] |= RxENABLE;
941 else
942 zport->regs[3] &= ~RxENABLE;
943
944 if (zport != zport_a) {
945 if (!(termios->c_cflag & CLOCAL)) {
946 zport->regs[15] |= DCDIE;
947 } else
948 zport->regs[15] &= ~DCDIE;
949 if (termios->c_cflag & CRTSCTS) {
950 zport->regs[15] |= CTSIE;
951 } else
952 zport->regs[15] &= ~CTSIE;
953 zs_raw_xor_mctrl(zport);
954 }
955
956 /* Load up the new values. */
957 load_zsregs(zport, zport->regs, irq);
958
959 spin_unlock_irqrestore(&scc->zlock, flags);
960}
961
962/*
963 * Hack alert!
964 * Required solely so that the initial PROM-based console
965 * works undisturbed in parallel with this one.
966 */
967static void zs_pm(struct uart_port *uport, unsigned int state,
968 unsigned int oldstate)
969{
970 struct zs_port *zport = to_zport(uport);
971
972 if (state < 3)
973 zport->regs[5] |= TxENAB;
974 else
975 zport->regs[5] &= ~TxENAB;
976 write_zsreg(zport, R5, zport->regs[5]);
977}
978
979
980static const char *zs_type(struct uart_port *uport)
981{
982 return "Z85C30 SCC";
983}
984
985static void zs_release_port(struct uart_port *uport)
986{
987 iounmap(uport->membase);
988 uport->membase = 0;
989 release_mem_region(uport->mapbase, ZS_CHAN_IO_SIZE);
990}
991
992static int zs_map_port(struct uart_port *uport)
993{
994 if (!uport->membase)
995 uport->membase = ioremap_nocache(uport->mapbase,
996 ZS_CHAN_IO_SIZE);
997 if (!uport->membase) {
998 printk(KERN_ERR "zs: Cannot map MMIO\n");
999 return -ENOMEM;
1000 }
1001 return 0;
1002}
1003
1004static int zs_request_port(struct uart_port *uport)
1005{
1006 int ret;
1007
1008 if (!request_mem_region(uport->mapbase, ZS_CHAN_IO_SIZE, "scc")) {
1009 printk(KERN_ERR "zs: Unable to reserve MMIO resource\n");
1010 return -EBUSY;
1011 }
1012 ret = zs_map_port(uport);
1013 if (ret) {
1014 release_mem_region(uport->mapbase, ZS_CHAN_IO_SIZE);
1015 return ret;
1016 }
1017 return 0;
1018}
1019
1020static void zs_config_port(struct uart_port *uport, int flags)
1021{
1022 struct zs_port *zport = to_zport(uport);
1023
1024 if (flags & UART_CONFIG_TYPE) {
1025 if (zs_request_port(uport))
1026 return;
1027
1028 uport->type = PORT_ZS;
1029
1030 zs_reset(zport);
1031 }
1032}
1033
1034static int zs_verify_port(struct uart_port *uport, struct serial_struct *ser)
1035{
1036 struct zs_port *zport = to_zport(uport);
1037 int ret = 0;
1038
1039 if (ser->type != PORT_UNKNOWN && ser->type != PORT_ZS)
1040 ret = -EINVAL;
1041 if (ser->irq != uport->irq)
1042 ret = -EINVAL;
1043 if (ser->baud_base != uport->uartclk / zport->clk_mode / 4)
1044 ret = -EINVAL;
1045 return ret;
1046}
1047
1048
1049static const struct uart_ops zs_ops = {
1050 .tx_empty = zs_tx_empty,
1051 .set_mctrl = zs_set_mctrl,
1052 .get_mctrl = zs_get_mctrl,
1053 .stop_tx = zs_stop_tx,
1054 .start_tx = zs_start_tx,
1055 .stop_rx = zs_stop_rx,
1056 .enable_ms = zs_enable_ms,
1057 .break_ctl = zs_break_ctl,
1058 .startup = zs_startup,
1059 .shutdown = zs_shutdown,
1060 .set_termios = zs_set_termios,
1061 .pm = zs_pm,
1062 .type = zs_type,
1063 .release_port = zs_release_port,
1064 .request_port = zs_request_port,
1065 .config_port = zs_config_port,
1066 .verify_port = zs_verify_port,
1067};
1068
1069/*
1070 * Initialize Z85C30 port structures.
1071 */
1072static int __init zs_probe_sccs(void)
1073{
1074 static int probed;
1075 struct zs_parms zs_parms;
1076 int chip, side, irq;
1077 int n_chips = 0;
1078 int i;
1079
1080 if (probed)
1081 return 0;
1082
1083 irq = dec_interrupt[DEC_IRQ_SCC0];
1084 if (irq >= 0) {
1085 zs_parms.scc[n_chips] = IOASIC_SCC0;
1086 zs_parms.irq[n_chips] = dec_interrupt[DEC_IRQ_SCC0];
1087 n_chips++;
1088 }
1089 irq = dec_interrupt[DEC_IRQ_SCC1];
1090 if (irq >= 0) {
1091 zs_parms.scc[n_chips] = IOASIC_SCC1;
1092 zs_parms.irq[n_chips] = dec_interrupt[DEC_IRQ_SCC1];
1093 n_chips++;
1094 }
1095 if (!n_chips)
1096 return -ENXIO;
1097
1098 probed = 1;
1099
1100 for (chip = 0; chip < n_chips; chip++) {
1101 spin_lock_init(&zs_sccs[chip].zlock);
1102 for (side = 0; side < ZS_NUM_CHAN; side++) {
1103 struct zs_port *zport = &zs_sccs[chip].zport[side];
1104 struct uart_port *uport = &zport->port;
1105
1106 zport->scc = &zs_sccs[chip];
1107 zport->clk_mode = 16;
1108
1109 uport->irq = zs_parms.irq[chip];
1110 uport->uartclk = ZS_CLOCK;
1111 uport->fifosize = 1;
1112 uport->iotype = UPIO_MEM;
1113 uport->flags = UPF_BOOT_AUTOCONF;
1114 uport->ops = &zs_ops;
1115 uport->line = chip * ZS_NUM_CHAN + side;
1116 uport->mapbase = dec_kn_slot_base +
1117 zs_parms.scc[chip] +
1118 (side ^ ZS_CHAN_B) * ZS_CHAN_IO_SIZE;
1119
1120 for (i = 0; i < ZS_NUM_REGS; i++)
1121 zport->regs[i] = zs_init_regs[i];
1122 }
1123 }
1124
1125 return 0;
1126}
1127
1128
1129#ifdef CONFIG_SERIAL_ZS_CONSOLE
1130static void zs_console_putchar(struct uart_port *uport, int ch)
1131{
1132 struct zs_port *zport = to_zport(uport);
1133 struct zs_scc *scc = zport->scc;
1134 int irq;
1135 unsigned long flags;
1136
1137 spin_lock_irqsave(&scc->zlock, flags);
1138 irq = !irqs_disabled_flags(flags);
1139 if (zs_transmit_drain(zport, irq))
1140 write_zsdata(zport, ch);
1141 spin_unlock_irqrestore(&scc->zlock, flags);
1142}
1143
1144/*
1145 * Print a string to the serial port trying not to disturb
1146 * any possible real use of the port...
1147 */
1148static void zs_console_write(struct console *co, const char *s,
1149 unsigned int count)
1150{
1151 int chip = co->index / ZS_NUM_CHAN, side = co->index % ZS_NUM_CHAN;
1152 struct zs_port *zport = &zs_sccs[chip].zport[side];
1153 struct zs_scc *scc = zport->scc;
1154 unsigned long flags;
1155 u8 txint, txenb;
1156 int irq;
1157
1158 /* Disable transmit interrupts and enable the transmitter. */
1159 spin_lock_irqsave(&scc->zlock, flags);
1160 txint = zport->regs[1];
1161 txenb = zport->regs[5];
1162 if (txint & TxINT_ENAB) {
1163 zport->regs[1] = txint & ~TxINT_ENAB;
1164 write_zsreg(zport, R1, zport->regs[1]);
1165 }
1166 if (!(txenb & TxENAB)) {
1167 zport->regs[5] = txenb | TxENAB;
1168 write_zsreg(zport, R5, zport->regs[5]);
1169 }
1170 spin_unlock_irqrestore(&scc->zlock, flags);
1171
1172 uart_console_write(&zport->port, s, count, zs_console_putchar);
1173
1174 /* Restore transmit interrupts and the transmitter enable. */
1175 spin_lock_irqsave(&scc->zlock, flags);
1176 irq = !irqs_disabled_flags(flags);
1177 zs_line_drain(zport, irq);
1178 if (!(txenb & TxENAB)) {
1179 zport->regs[5] &= ~TxENAB;
1180 write_zsreg(zport, R5, zport->regs[5]);
1181 }
1182 if (txint & TxINT_ENAB) {
1183 zport->regs[1] |= TxINT_ENAB;
1184 write_zsreg(zport, R1, zport->regs[1]);
1185
1186 /* Resume any transmission as the TxIP bit won't be set. */
1187 if (!zport->tx_stopped)
1188 zs_raw_transmit_chars(zport);
1189 }
1190 spin_unlock_irqrestore(&scc->zlock, flags);
1191}
1192
1193/*
1194 * Setup serial console baud/bits/parity. We do two things here:
1195 * - construct a cflag setting for the first uart_open()
1196 * - initialise the serial port
1197 * Return non-zero if we didn't find a serial port.
1198 */
1199static int __init zs_console_setup(struct console *co, char *options)
1200{
1201 int chip = co->index / ZS_NUM_CHAN, side = co->index % ZS_NUM_CHAN;
1202 struct zs_port *zport = &zs_sccs[chip].zport[side];
1203 struct uart_port *uport = &zport->port;
1204 int baud = 9600;
1205 int bits = 8;
1206 int parity = 'n';
1207 int flow = 'n';
1208 int ret;
1209
1210 ret = zs_map_port(uport);
1211 if (ret)
1212 return ret;
1213
1214 zs_reset(zport);
1215 zs_pm(uport, 0, -1);
1216
1217 if (options)
1218 uart_parse_options(options, &baud, &parity, &bits, &flow);
1219 return uart_set_options(uport, co, baud, parity, bits, flow);
1220}
1221
1222static struct uart_driver zs_reg;
1223static struct console zs_console = {
1224 .name = "ttyS",
1225 .write = zs_console_write,
1226 .device = uart_console_device,
1227 .setup = zs_console_setup,
1228 .flags = CON_PRINTBUFFER,
1229 .index = -1,
1230 .data = &zs_reg,
1231};
1232
1233/*
1234 * Register console.
1235 */
1236static int __init zs_serial_console_init(void)
1237{
1238 int ret;
1239
1240 ret = zs_probe_sccs();
1241 if (ret)
1242 return ret;
1243 register_console(&zs_console);
1244
1245 return 0;
1246}
1247
1248console_initcall(zs_serial_console_init);
1249
1250#define SERIAL_ZS_CONSOLE &zs_console
1251#else
1252#define SERIAL_ZS_CONSOLE NULL
1253#endif /* CONFIG_SERIAL_ZS_CONSOLE */
1254
1255static struct uart_driver zs_reg = {
1256 .owner = THIS_MODULE,
1257 .driver_name = "serial",
1258 .dev_name = "ttyS",
1259 .major = TTY_MAJOR,
1260 .minor = 64,
1261 .nr = ZS_NUM_SCCS * ZS_NUM_CHAN,
1262 .cons = SERIAL_ZS_CONSOLE,
1263};
1264
1265/* zs_init inits the driver. */
1266static int __init zs_init(void)
1267{
1268 int i, ret;
1269
1270 pr_info("%s%s\n", zs_name, zs_version);
1271
1272 /* Find out how many Z85C30 SCCs we have. */
1273 ret = zs_probe_sccs();
1274 if (ret)
1275 return ret;
1276
1277 ret = uart_register_driver(&zs_reg);
1278 if (ret)
1279 return ret;
1280
1281 for (i = 0; i < ZS_NUM_SCCS * ZS_NUM_CHAN; i++) {
1282 struct zs_scc *scc = &zs_sccs[i / ZS_NUM_CHAN];
1283 struct zs_port *zport = &scc->zport[i % ZS_NUM_CHAN];
1284 struct uart_port *uport = &zport->port;
1285
1286 if (zport->scc)
1287 uart_add_one_port(&zs_reg, uport);
1288 }
1289
1290 return 0;
1291}
1292
1293static void __exit zs_exit(void)
1294{
1295 int i;
1296
1297 for (i = ZS_NUM_SCCS * ZS_NUM_CHAN - 1; i >= 0; i--) {
1298 struct zs_scc *scc = &zs_sccs[i / ZS_NUM_CHAN];
1299 struct zs_port *zport = &scc->zport[i % ZS_NUM_CHAN];
1300 struct uart_port *uport = &zport->port;
1301
1302 if (zport->scc)
1303 uart_remove_one_port(&zs_reg, uport);
1304 }
1305
1306 uart_unregister_driver(&zs_reg);
1307}
1308
1309module_init(zs_init);
1310module_exit(zs_exit);