Loading...
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * SH RSPI driver
4 *
5 * Copyright (C) 2012, 2013 Renesas Solutions Corp.
6 * Copyright (C) 2014 Glider bvba
7 *
8 * Based on spi-sh.c:
9 * Copyright (C) 2011 Renesas Solutions Corp.
10 */
11
12#include <linux/module.h>
13#include <linux/kernel.h>
14#include <linux/sched.h>
15#include <linux/errno.h>
16#include <linux/interrupt.h>
17#include <linux/platform_device.h>
18#include <linux/io.h>
19#include <linux/clk.h>
20#include <linux/dmaengine.h>
21#include <linux/dma-mapping.h>
22#include <linux/of.h>
23#include <linux/pm_runtime.h>
24#include <linux/reset.h>
25#include <linux/sh_dma.h>
26#include <linux/spi/spi.h>
27#include <linux/spi/rspi.h>
28#include <linux/spinlock.h>
29
30#define RSPI_SPCR 0x00 /* Control Register */
31#define RSPI_SSLP 0x01 /* Slave Select Polarity Register */
32#define RSPI_SPPCR 0x02 /* Pin Control Register */
33#define RSPI_SPSR 0x03 /* Status Register */
34#define RSPI_SPDR 0x04 /* Data Register */
35#define RSPI_SPSCR 0x08 /* Sequence Control Register */
36#define RSPI_SPSSR 0x09 /* Sequence Status Register */
37#define RSPI_SPBR 0x0a /* Bit Rate Register */
38#define RSPI_SPDCR 0x0b /* Data Control Register */
39#define RSPI_SPCKD 0x0c /* Clock Delay Register */
40#define RSPI_SSLND 0x0d /* Slave Select Negation Delay Register */
41#define RSPI_SPND 0x0e /* Next-Access Delay Register */
42#define RSPI_SPCR2 0x0f /* Control Register 2 (SH only) */
43#define RSPI_SPCMD0 0x10 /* Command Register 0 */
44#define RSPI_SPCMD1 0x12 /* Command Register 1 */
45#define RSPI_SPCMD2 0x14 /* Command Register 2 */
46#define RSPI_SPCMD3 0x16 /* Command Register 3 */
47#define RSPI_SPCMD4 0x18 /* Command Register 4 */
48#define RSPI_SPCMD5 0x1a /* Command Register 5 */
49#define RSPI_SPCMD6 0x1c /* Command Register 6 */
50#define RSPI_SPCMD7 0x1e /* Command Register 7 */
51#define RSPI_SPCMD(i) (RSPI_SPCMD0 + (i) * 2)
52#define RSPI_NUM_SPCMD 8
53#define RSPI_RZ_NUM_SPCMD 4
54#define QSPI_NUM_SPCMD 4
55
56/* RSPI on RZ only */
57#define RSPI_SPBFCR 0x20 /* Buffer Control Register */
58#define RSPI_SPBFDR 0x22 /* Buffer Data Count Setting Register */
59
60/* QSPI only */
61#define QSPI_SPBFCR 0x18 /* Buffer Control Register */
62#define QSPI_SPBDCR 0x1a /* Buffer Data Count Register */
63#define QSPI_SPBMUL0 0x1c /* Transfer Data Length Multiplier Setting Register 0 */
64#define QSPI_SPBMUL1 0x20 /* Transfer Data Length Multiplier Setting Register 1 */
65#define QSPI_SPBMUL2 0x24 /* Transfer Data Length Multiplier Setting Register 2 */
66#define QSPI_SPBMUL3 0x28 /* Transfer Data Length Multiplier Setting Register 3 */
67#define QSPI_SPBMUL(i) (QSPI_SPBMUL0 + (i) * 4)
68
69/* SPCR - Control Register */
70#define SPCR_SPRIE 0x80 /* Receive Interrupt Enable */
71#define SPCR_SPE 0x40 /* Function Enable */
72#define SPCR_SPTIE 0x20 /* Transmit Interrupt Enable */
73#define SPCR_SPEIE 0x10 /* Error Interrupt Enable */
74#define SPCR_MSTR 0x08 /* Master/Slave Mode Select */
75#define SPCR_MODFEN 0x04 /* Mode Fault Error Detection Enable */
76/* RSPI on SH only */
77#define SPCR_TXMD 0x02 /* TX Only Mode (vs. Full Duplex) */
78#define SPCR_SPMS 0x01 /* 3-wire Mode (vs. 4-wire) */
79/* QSPI on R-Car Gen2 only */
80#define SPCR_WSWAP 0x02 /* Word Swap of read-data for DMAC */
81#define SPCR_BSWAP 0x01 /* Byte Swap of read-data for DMAC */
82
83/* SSLP - Slave Select Polarity Register */
84#define SSLP_SSLP(i) BIT(i) /* SSLi Signal Polarity Setting */
85
86/* SPPCR - Pin Control Register */
87#define SPPCR_MOIFE 0x20 /* MOSI Idle Value Fixing Enable */
88#define SPPCR_MOIFV 0x10 /* MOSI Idle Fixed Value */
89#define SPPCR_SPOM 0x04
90#define SPPCR_SPLP2 0x02 /* Loopback Mode 2 (non-inverting) */
91#define SPPCR_SPLP 0x01 /* Loopback Mode (inverting) */
92
93#define SPPCR_IO3FV 0x04 /* Single-/Dual-SPI Mode IO3 Output Fixed Value */
94#define SPPCR_IO2FV 0x04 /* Single-/Dual-SPI Mode IO2 Output Fixed Value */
95
96/* SPSR - Status Register */
97#define SPSR_SPRF 0x80 /* Receive Buffer Full Flag */
98#define SPSR_TEND 0x40 /* Transmit End */
99#define SPSR_SPTEF 0x20 /* Transmit Buffer Empty Flag */
100#define SPSR_PERF 0x08 /* Parity Error Flag */
101#define SPSR_MODF 0x04 /* Mode Fault Error Flag */
102#define SPSR_IDLNF 0x02 /* RSPI Idle Flag */
103#define SPSR_OVRF 0x01 /* Overrun Error Flag (RSPI only) */
104
105/* SPSCR - Sequence Control Register */
106#define SPSCR_SPSLN_MASK 0x07 /* Sequence Length Specification */
107
108/* SPSSR - Sequence Status Register */
109#define SPSSR_SPECM_MASK 0x70 /* Command Error Mask */
110#define SPSSR_SPCP_MASK 0x07 /* Command Pointer Mask */
111
112/* SPDCR - Data Control Register */
113#define SPDCR_TXDMY 0x80 /* Dummy Data Transmission Enable */
114#define SPDCR_SPLW1 0x40 /* Access Width Specification (RZ) */
115#define SPDCR_SPLW0 0x20 /* Access Width Specification (RZ) */
116#define SPDCR_SPLLWORD (SPDCR_SPLW1 | SPDCR_SPLW0)
117#define SPDCR_SPLWORD SPDCR_SPLW1
118#define SPDCR_SPLBYTE SPDCR_SPLW0
119#define SPDCR_SPLW 0x20 /* Access Width Specification (SH) */
120#define SPDCR_SPRDTD 0x10 /* Receive Transmit Data Select (SH) */
121#define SPDCR_SLSEL1 0x08
122#define SPDCR_SLSEL0 0x04
123#define SPDCR_SLSEL_MASK 0x0c /* SSL1 Output Select (SH) */
124#define SPDCR_SPFC1 0x02
125#define SPDCR_SPFC0 0x01
126#define SPDCR_SPFC_MASK 0x03 /* Frame Count Setting (1-4) (SH) */
127
128/* SPCKD - Clock Delay Register */
129#define SPCKD_SCKDL_MASK 0x07 /* Clock Delay Setting (1-8) */
130
131/* SSLND - Slave Select Negation Delay Register */
132#define SSLND_SLNDL_MASK 0x07 /* SSL Negation Delay Setting (1-8) */
133
134/* SPND - Next-Access Delay Register */
135#define SPND_SPNDL_MASK 0x07 /* Next-Access Delay Setting (1-8) */
136
137/* SPCR2 - Control Register 2 */
138#define SPCR2_PTE 0x08 /* Parity Self-Test Enable */
139#define SPCR2_SPIE 0x04 /* Idle Interrupt Enable */
140#define SPCR2_SPOE 0x02 /* Odd Parity Enable (vs. Even) */
141#define SPCR2_SPPE 0x01 /* Parity Enable */
142
143/* SPCMDn - Command Registers */
144#define SPCMD_SCKDEN 0x8000 /* Clock Delay Setting Enable */
145#define SPCMD_SLNDEN 0x4000 /* SSL Negation Delay Setting Enable */
146#define SPCMD_SPNDEN 0x2000 /* Next-Access Delay Enable */
147#define SPCMD_LSBF 0x1000 /* LSB First */
148#define SPCMD_SPB_MASK 0x0f00 /* Data Length Setting */
149#define SPCMD_SPB_8_TO_16(bit) (((bit - 1) << 8) & SPCMD_SPB_MASK)
150#define SPCMD_SPB_8BIT 0x0000 /* QSPI only */
151#define SPCMD_SPB_16BIT 0x0100
152#define SPCMD_SPB_20BIT 0x0000
153#define SPCMD_SPB_24BIT 0x0100
154#define SPCMD_SPB_32BIT 0x0200
155#define SPCMD_SSLKP 0x0080 /* SSL Signal Level Keeping */
156#define SPCMD_SPIMOD_MASK 0x0060 /* SPI Operating Mode (QSPI only) */
157#define SPCMD_SPIMOD1 0x0040
158#define SPCMD_SPIMOD0 0x0020
159#define SPCMD_SPIMOD_SINGLE 0
160#define SPCMD_SPIMOD_DUAL SPCMD_SPIMOD0
161#define SPCMD_SPIMOD_QUAD SPCMD_SPIMOD1
162#define SPCMD_SPRW 0x0010 /* SPI Read/Write Access (Dual/Quad) */
163#define SPCMD_SSLA(i) ((i) << 4) /* SSL Assert Signal Setting */
164#define SPCMD_BRDV_MASK 0x000c /* Bit Rate Division Setting */
165#define SPCMD_BRDV(brdv) ((brdv) << 2)
166#define SPCMD_CPOL 0x0002 /* Clock Polarity Setting */
167#define SPCMD_CPHA 0x0001 /* Clock Phase Setting */
168
169/* SPBFCR - Buffer Control Register */
170#define SPBFCR_TXRST 0x80 /* Transmit Buffer Data Reset */
171#define SPBFCR_RXRST 0x40 /* Receive Buffer Data Reset */
172#define SPBFCR_TXTRG_MASK 0x30 /* Transmit Buffer Data Triggering Number */
173#define SPBFCR_RXTRG_MASK 0x07 /* Receive Buffer Data Triggering Number */
174/* QSPI on R-Car Gen2 */
175#define SPBFCR_TXTRG_1B 0x00 /* 31 bytes (1 byte available) */
176#define SPBFCR_TXTRG_32B 0x30 /* 0 byte (32 bytes available) */
177#define SPBFCR_RXTRG_1B 0x00 /* 1 byte (31 bytes available) */
178#define SPBFCR_RXTRG_32B 0x07 /* 32 bytes (0 byte available) */
179
180#define QSPI_BUFFER_SIZE 32u
181
182struct rspi_data {
183 void __iomem *addr;
184 u32 speed_hz;
185 struct spi_controller *ctlr;
186 struct platform_device *pdev;
187 wait_queue_head_t wait;
188 spinlock_t lock; /* Protects RMW-access to RSPI_SSLP */
189 struct clk *clk;
190 u16 spcmd;
191 u8 spsr;
192 u8 sppcr;
193 int rx_irq, tx_irq;
194 const struct spi_ops *ops;
195
196 unsigned dma_callbacked:1;
197 unsigned byte_access:1;
198};
199
200static void rspi_write8(const struct rspi_data *rspi, u8 data, u16 offset)
201{
202 iowrite8(data, rspi->addr + offset);
203}
204
205static void rspi_write16(const struct rspi_data *rspi, u16 data, u16 offset)
206{
207 iowrite16(data, rspi->addr + offset);
208}
209
210static void rspi_write32(const struct rspi_data *rspi, u32 data, u16 offset)
211{
212 iowrite32(data, rspi->addr + offset);
213}
214
215static u8 rspi_read8(const struct rspi_data *rspi, u16 offset)
216{
217 return ioread8(rspi->addr + offset);
218}
219
220static u16 rspi_read16(const struct rspi_data *rspi, u16 offset)
221{
222 return ioread16(rspi->addr + offset);
223}
224
225static void rspi_write_data(const struct rspi_data *rspi, u16 data)
226{
227 if (rspi->byte_access)
228 rspi_write8(rspi, data, RSPI_SPDR);
229 else /* 16 bit */
230 rspi_write16(rspi, data, RSPI_SPDR);
231}
232
233static u16 rspi_read_data(const struct rspi_data *rspi)
234{
235 if (rspi->byte_access)
236 return rspi_read8(rspi, RSPI_SPDR);
237 else /* 16 bit */
238 return rspi_read16(rspi, RSPI_SPDR);
239}
240
241/* optional functions */
242struct spi_ops {
243 int (*set_config_register)(struct rspi_data *rspi, int access_size);
244 int (*transfer_one)(struct spi_controller *ctlr,
245 struct spi_device *spi, struct spi_transfer *xfer);
246 u16 extra_mode_bits;
247 u16 min_div;
248 u16 max_div;
249 u16 flags;
250 u16 fifo_size;
251 u8 num_hw_ss;
252};
253
254static void rspi_set_rate(struct rspi_data *rspi)
255{
256 unsigned long clksrc;
257 int brdv = 0, spbr;
258
259 clksrc = clk_get_rate(rspi->clk);
260 spbr = DIV_ROUND_UP(clksrc, 2 * rspi->speed_hz) - 1;
261 while (spbr > 255 && brdv < 3) {
262 brdv++;
263 spbr = DIV_ROUND_UP(spbr + 1, 2) - 1;
264 }
265
266 rspi_write8(rspi, clamp(spbr, 0, 255), RSPI_SPBR);
267 rspi->spcmd |= SPCMD_BRDV(brdv);
268 rspi->speed_hz = DIV_ROUND_UP(clksrc, (2U << brdv) * (spbr + 1));
269}
270
271/*
272 * functions for RSPI on legacy SH
273 */
274static int rspi_set_config_register(struct rspi_data *rspi, int access_size)
275{
276 /* Sets output mode, MOSI signal, and (optionally) loopback */
277 rspi_write8(rspi, rspi->sppcr, RSPI_SPPCR);
278
279 /* Sets transfer bit rate */
280 rspi_set_rate(rspi);
281
282 /* Disable dummy transmission, set 16-bit word access, 1 frame */
283 rspi_write8(rspi, 0, RSPI_SPDCR);
284 rspi->byte_access = 0;
285
286 /* Sets RSPCK, SSL, next-access delay value */
287 rspi_write8(rspi, 0x00, RSPI_SPCKD);
288 rspi_write8(rspi, 0x00, RSPI_SSLND);
289 rspi_write8(rspi, 0x00, RSPI_SPND);
290
291 /* Sets parity, interrupt mask */
292 rspi_write8(rspi, 0x00, RSPI_SPCR2);
293
294 /* Resets sequencer */
295 rspi_write8(rspi, 0, RSPI_SPSCR);
296 rspi->spcmd |= SPCMD_SPB_8_TO_16(access_size);
297 rspi_write16(rspi, rspi->spcmd, RSPI_SPCMD0);
298
299 /* Sets RSPI mode */
300 rspi_write8(rspi, SPCR_MSTR, RSPI_SPCR);
301
302 return 0;
303}
304
305/*
306 * functions for RSPI on RZ
307 */
308static int rspi_rz_set_config_register(struct rspi_data *rspi, int access_size)
309{
310 /* Sets output mode, MOSI signal, and (optionally) loopback */
311 rspi_write8(rspi, rspi->sppcr, RSPI_SPPCR);
312
313 /* Sets transfer bit rate */
314 rspi_set_rate(rspi);
315
316 /* Disable dummy transmission, set byte access */
317 rspi_write8(rspi, SPDCR_SPLBYTE, RSPI_SPDCR);
318 rspi->byte_access = 1;
319
320 /* Sets RSPCK, SSL, next-access delay value */
321 rspi_write8(rspi, 0x00, RSPI_SPCKD);
322 rspi_write8(rspi, 0x00, RSPI_SSLND);
323 rspi_write8(rspi, 0x00, RSPI_SPND);
324
325 /* Resets sequencer */
326 rspi_write8(rspi, 0, RSPI_SPSCR);
327 rspi->spcmd |= SPCMD_SPB_8_TO_16(access_size);
328 rspi_write16(rspi, rspi->spcmd, RSPI_SPCMD0);
329
330 /* Sets RSPI mode */
331 rspi_write8(rspi, SPCR_MSTR, RSPI_SPCR);
332
333 return 0;
334}
335
336/*
337 * functions for QSPI
338 */
339static int qspi_set_config_register(struct rspi_data *rspi, int access_size)
340{
341 unsigned long clksrc;
342 int brdv = 0, spbr;
343
344 /* Sets output mode, MOSI signal, and (optionally) loopback */
345 rspi_write8(rspi, rspi->sppcr, RSPI_SPPCR);
346
347 /* Sets transfer bit rate */
348 clksrc = clk_get_rate(rspi->clk);
349 if (rspi->speed_hz >= clksrc) {
350 spbr = 0;
351 rspi->speed_hz = clksrc;
352 } else {
353 spbr = DIV_ROUND_UP(clksrc, 2 * rspi->speed_hz);
354 while (spbr > 255 && brdv < 3) {
355 brdv++;
356 spbr = DIV_ROUND_UP(spbr, 2);
357 }
358 spbr = clamp(spbr, 0, 255);
359 rspi->speed_hz = DIV_ROUND_UP(clksrc, (2U << brdv) * spbr);
360 }
361 rspi_write8(rspi, spbr, RSPI_SPBR);
362 rspi->spcmd |= SPCMD_BRDV(brdv);
363
364 /* Disable dummy transmission, set byte access */
365 rspi_write8(rspi, 0, RSPI_SPDCR);
366 rspi->byte_access = 1;
367
368 /* Sets RSPCK, SSL, next-access delay value */
369 rspi_write8(rspi, 0x00, RSPI_SPCKD);
370 rspi_write8(rspi, 0x00, RSPI_SSLND);
371 rspi_write8(rspi, 0x00, RSPI_SPND);
372
373 /* Data Length Setting */
374 if (access_size == 8)
375 rspi->spcmd |= SPCMD_SPB_8BIT;
376 else if (access_size == 16)
377 rspi->spcmd |= SPCMD_SPB_16BIT;
378 else
379 rspi->spcmd |= SPCMD_SPB_32BIT;
380
381 rspi->spcmd |= SPCMD_SCKDEN | SPCMD_SLNDEN | SPCMD_SPNDEN;
382
383 /* Resets transfer data length */
384 rspi_write32(rspi, 0, QSPI_SPBMUL0);
385
386 /* Resets transmit and receive buffer */
387 rspi_write8(rspi, SPBFCR_TXRST | SPBFCR_RXRST, QSPI_SPBFCR);
388 /* Sets buffer to allow normal operation */
389 rspi_write8(rspi, 0x00, QSPI_SPBFCR);
390
391 /* Resets sequencer */
392 rspi_write8(rspi, 0, RSPI_SPSCR);
393 rspi_write16(rspi, rspi->spcmd, RSPI_SPCMD0);
394
395 /* Sets RSPI mode */
396 rspi_write8(rspi, SPCR_MSTR, RSPI_SPCR);
397
398 return 0;
399}
400
401static void qspi_update(const struct rspi_data *rspi, u8 mask, u8 val, u8 reg)
402{
403 u8 data;
404
405 data = rspi_read8(rspi, reg);
406 data &= ~mask;
407 data |= (val & mask);
408 rspi_write8(rspi, data, reg);
409}
410
411static unsigned int qspi_set_send_trigger(struct rspi_data *rspi,
412 unsigned int len)
413{
414 unsigned int n;
415
416 n = min(len, QSPI_BUFFER_SIZE);
417
418 if (len >= QSPI_BUFFER_SIZE) {
419 /* sets triggering number to 32 bytes */
420 qspi_update(rspi, SPBFCR_TXTRG_MASK,
421 SPBFCR_TXTRG_32B, QSPI_SPBFCR);
422 } else {
423 /* sets triggering number to 1 byte */
424 qspi_update(rspi, SPBFCR_TXTRG_MASK,
425 SPBFCR_TXTRG_1B, QSPI_SPBFCR);
426 }
427
428 return n;
429}
430
431static int qspi_set_receive_trigger(struct rspi_data *rspi, unsigned int len)
432{
433 unsigned int n;
434
435 n = min(len, QSPI_BUFFER_SIZE);
436
437 if (len >= QSPI_BUFFER_SIZE) {
438 /* sets triggering number to 32 bytes */
439 qspi_update(rspi, SPBFCR_RXTRG_MASK,
440 SPBFCR_RXTRG_32B, QSPI_SPBFCR);
441 } else {
442 /* sets triggering number to 1 byte */
443 qspi_update(rspi, SPBFCR_RXTRG_MASK,
444 SPBFCR_RXTRG_1B, QSPI_SPBFCR);
445 }
446 return n;
447}
448
449static void rspi_enable_irq(const struct rspi_data *rspi, u8 enable)
450{
451 rspi_write8(rspi, rspi_read8(rspi, RSPI_SPCR) | enable, RSPI_SPCR);
452}
453
454static void rspi_disable_irq(const struct rspi_data *rspi, u8 disable)
455{
456 rspi_write8(rspi, rspi_read8(rspi, RSPI_SPCR) & ~disable, RSPI_SPCR);
457}
458
459static int rspi_wait_for_interrupt(struct rspi_data *rspi, u8 wait_mask,
460 u8 enable_bit)
461{
462 int ret;
463
464 rspi->spsr = rspi_read8(rspi, RSPI_SPSR);
465 if (rspi->spsr & wait_mask)
466 return 0;
467
468 rspi_enable_irq(rspi, enable_bit);
469 ret = wait_event_timeout(rspi->wait, rspi->spsr & wait_mask, HZ);
470 if (ret == 0 && !(rspi->spsr & wait_mask))
471 return -ETIMEDOUT;
472
473 return 0;
474}
475
476static inline int rspi_wait_for_tx_empty(struct rspi_data *rspi)
477{
478 return rspi_wait_for_interrupt(rspi, SPSR_SPTEF, SPCR_SPTIE);
479}
480
481static inline int rspi_wait_for_rx_full(struct rspi_data *rspi)
482{
483 return rspi_wait_for_interrupt(rspi, SPSR_SPRF, SPCR_SPRIE);
484}
485
486static int rspi_data_out(struct rspi_data *rspi, u8 data)
487{
488 int error = rspi_wait_for_tx_empty(rspi);
489 if (error < 0) {
490 dev_err(&rspi->ctlr->dev, "transmit timeout\n");
491 return error;
492 }
493 rspi_write_data(rspi, data);
494 return 0;
495}
496
497static int rspi_data_in(struct rspi_data *rspi)
498{
499 int error;
500 u8 data;
501
502 error = rspi_wait_for_rx_full(rspi);
503 if (error < 0) {
504 dev_err(&rspi->ctlr->dev, "receive timeout\n");
505 return error;
506 }
507 data = rspi_read_data(rspi);
508 return data;
509}
510
511static int rspi_pio_transfer(struct rspi_data *rspi, const u8 *tx, u8 *rx,
512 unsigned int n)
513{
514 while (n-- > 0) {
515 if (tx) {
516 int ret = rspi_data_out(rspi, *tx++);
517 if (ret < 0)
518 return ret;
519 }
520 if (rx) {
521 int ret = rspi_data_in(rspi);
522 if (ret < 0)
523 return ret;
524 *rx++ = ret;
525 }
526 }
527
528 return 0;
529}
530
531static void rspi_dma_complete(void *arg)
532{
533 struct rspi_data *rspi = arg;
534
535 rspi->dma_callbacked = 1;
536 wake_up_interruptible(&rspi->wait);
537}
538
539static int rspi_dma_transfer(struct rspi_data *rspi, struct sg_table *tx,
540 struct sg_table *rx)
541{
542 struct dma_async_tx_descriptor *desc_tx = NULL, *desc_rx = NULL;
543 u8 irq_mask = 0;
544 unsigned int other_irq = 0;
545 dma_cookie_t cookie;
546 int ret;
547
548 /* First prepare and submit the DMA request(s), as this may fail */
549 if (rx) {
550 desc_rx = dmaengine_prep_slave_sg(rspi->ctlr->dma_rx, rx->sgl,
551 rx->nents, DMA_DEV_TO_MEM,
552 DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
553 if (!desc_rx) {
554 ret = -EAGAIN;
555 goto no_dma_rx;
556 }
557
558 desc_rx->callback = rspi_dma_complete;
559 desc_rx->callback_param = rspi;
560 cookie = dmaengine_submit(desc_rx);
561 if (dma_submit_error(cookie)) {
562 ret = cookie;
563 goto no_dma_rx;
564 }
565
566 irq_mask |= SPCR_SPRIE;
567 }
568
569 if (tx) {
570 desc_tx = dmaengine_prep_slave_sg(rspi->ctlr->dma_tx, tx->sgl,
571 tx->nents, DMA_MEM_TO_DEV,
572 DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
573 if (!desc_tx) {
574 ret = -EAGAIN;
575 goto no_dma_tx;
576 }
577
578 if (rx) {
579 /* No callback */
580 desc_tx->callback = NULL;
581 } else {
582 desc_tx->callback = rspi_dma_complete;
583 desc_tx->callback_param = rspi;
584 }
585 cookie = dmaengine_submit(desc_tx);
586 if (dma_submit_error(cookie)) {
587 ret = cookie;
588 goto no_dma_tx;
589 }
590
591 irq_mask |= SPCR_SPTIE;
592 }
593
594 /*
595 * DMAC needs SPxIE, but if SPxIE is set, the IRQ routine will be
596 * called. So, this driver disables the IRQ while DMA transfer.
597 */
598 if (tx)
599 disable_irq(other_irq = rspi->tx_irq);
600 if (rx && rspi->rx_irq != other_irq)
601 disable_irq(rspi->rx_irq);
602
603 rspi_enable_irq(rspi, irq_mask);
604 rspi->dma_callbacked = 0;
605
606 /* Now start DMA */
607 if (rx)
608 dma_async_issue_pending(rspi->ctlr->dma_rx);
609 if (tx)
610 dma_async_issue_pending(rspi->ctlr->dma_tx);
611
612 ret = wait_event_interruptible_timeout(rspi->wait,
613 rspi->dma_callbacked, HZ);
614 if (ret > 0 && rspi->dma_callbacked) {
615 ret = 0;
616 if (tx)
617 dmaengine_synchronize(rspi->ctlr->dma_tx);
618 if (rx)
619 dmaengine_synchronize(rspi->ctlr->dma_rx);
620 } else {
621 if (!ret) {
622 dev_err(&rspi->ctlr->dev, "DMA timeout\n");
623 ret = -ETIMEDOUT;
624 }
625 if (tx)
626 dmaengine_terminate_sync(rspi->ctlr->dma_tx);
627 if (rx)
628 dmaengine_terminate_sync(rspi->ctlr->dma_rx);
629 }
630
631 rspi_disable_irq(rspi, irq_mask);
632
633 if (tx)
634 enable_irq(rspi->tx_irq);
635 if (rx && rspi->rx_irq != other_irq)
636 enable_irq(rspi->rx_irq);
637
638 return ret;
639
640no_dma_tx:
641 if (rx)
642 dmaengine_terminate_sync(rspi->ctlr->dma_rx);
643no_dma_rx:
644 if (ret == -EAGAIN) {
645 dev_warn_once(&rspi->ctlr->dev,
646 "DMA not available, falling back to PIO\n");
647 }
648 return ret;
649}
650
651static void rspi_receive_init(const struct rspi_data *rspi)
652{
653 u8 spsr;
654
655 spsr = rspi_read8(rspi, RSPI_SPSR);
656 if (spsr & SPSR_SPRF)
657 rspi_read_data(rspi); /* dummy read */
658 if (spsr & SPSR_OVRF)
659 rspi_write8(rspi, rspi_read8(rspi, RSPI_SPSR) & ~SPSR_OVRF,
660 RSPI_SPSR);
661}
662
663static void rspi_rz_receive_init(const struct rspi_data *rspi)
664{
665 rspi_receive_init(rspi);
666 rspi_write8(rspi, SPBFCR_TXRST | SPBFCR_RXRST, RSPI_SPBFCR);
667 rspi_write8(rspi, 0, RSPI_SPBFCR);
668}
669
670static void qspi_receive_init(const struct rspi_data *rspi)
671{
672 u8 spsr;
673
674 spsr = rspi_read8(rspi, RSPI_SPSR);
675 if (spsr & SPSR_SPRF)
676 rspi_read_data(rspi); /* dummy read */
677 rspi_write8(rspi, SPBFCR_TXRST | SPBFCR_RXRST, QSPI_SPBFCR);
678 rspi_write8(rspi, 0, QSPI_SPBFCR);
679}
680
681static bool __rspi_can_dma(const struct rspi_data *rspi,
682 const struct spi_transfer *xfer)
683{
684 return xfer->len > rspi->ops->fifo_size;
685}
686
687static bool rspi_can_dma(struct spi_controller *ctlr, struct spi_device *spi,
688 struct spi_transfer *xfer)
689{
690 struct rspi_data *rspi = spi_controller_get_devdata(ctlr);
691
692 return __rspi_can_dma(rspi, xfer);
693}
694
695static int rspi_dma_check_then_transfer(struct rspi_data *rspi,
696 struct spi_transfer *xfer)
697{
698 if (!rspi->ctlr->can_dma || !__rspi_can_dma(rspi, xfer))
699 return -EAGAIN;
700
701 /* rx_buf can be NULL on RSPI on SH in TX-only Mode */
702 return rspi_dma_transfer(rspi, &xfer->tx_sg,
703 xfer->rx_buf ? &xfer->rx_sg : NULL);
704}
705
706static int rspi_common_transfer(struct rspi_data *rspi,
707 struct spi_transfer *xfer)
708{
709 int ret;
710
711 xfer->effective_speed_hz = rspi->speed_hz;
712
713 ret = rspi_dma_check_then_transfer(rspi, xfer);
714 if (ret != -EAGAIN)
715 return ret;
716
717 ret = rspi_pio_transfer(rspi, xfer->tx_buf, xfer->rx_buf, xfer->len);
718 if (ret < 0)
719 return ret;
720
721 /* Wait for the last transmission */
722 rspi_wait_for_tx_empty(rspi);
723
724 return 0;
725}
726
727static int rspi_transfer_one(struct spi_controller *ctlr,
728 struct spi_device *spi, struct spi_transfer *xfer)
729{
730 struct rspi_data *rspi = spi_controller_get_devdata(ctlr);
731 u8 spcr;
732
733 spcr = rspi_read8(rspi, RSPI_SPCR);
734 if (xfer->rx_buf) {
735 rspi_receive_init(rspi);
736 spcr &= ~SPCR_TXMD;
737 } else {
738 spcr |= SPCR_TXMD;
739 }
740 rspi_write8(rspi, spcr, RSPI_SPCR);
741
742 return rspi_common_transfer(rspi, xfer);
743}
744
745static int rspi_rz_transfer_one(struct spi_controller *ctlr,
746 struct spi_device *spi,
747 struct spi_transfer *xfer)
748{
749 struct rspi_data *rspi = spi_controller_get_devdata(ctlr);
750
751 rspi_rz_receive_init(rspi);
752
753 return rspi_common_transfer(rspi, xfer);
754}
755
756static int qspi_trigger_transfer_out_in(struct rspi_data *rspi, const u8 *tx,
757 u8 *rx, unsigned int len)
758{
759 unsigned int i, n;
760 int ret;
761
762 while (len > 0) {
763 n = qspi_set_send_trigger(rspi, len);
764 qspi_set_receive_trigger(rspi, len);
765 ret = rspi_wait_for_tx_empty(rspi);
766 if (ret < 0) {
767 dev_err(&rspi->ctlr->dev, "transmit timeout\n");
768 return ret;
769 }
770 for (i = 0; i < n; i++)
771 rspi_write_data(rspi, *tx++);
772
773 ret = rspi_wait_for_rx_full(rspi);
774 if (ret < 0) {
775 dev_err(&rspi->ctlr->dev, "receive timeout\n");
776 return ret;
777 }
778 for (i = 0; i < n; i++)
779 *rx++ = rspi_read_data(rspi);
780
781 len -= n;
782 }
783
784 return 0;
785}
786
787static int qspi_transfer_out_in(struct rspi_data *rspi,
788 struct spi_transfer *xfer)
789{
790 int ret;
791
792 qspi_receive_init(rspi);
793
794 ret = rspi_dma_check_then_transfer(rspi, xfer);
795 if (ret != -EAGAIN)
796 return ret;
797
798 return qspi_trigger_transfer_out_in(rspi, xfer->tx_buf,
799 xfer->rx_buf, xfer->len);
800}
801
802static int qspi_transfer_out(struct rspi_data *rspi, struct spi_transfer *xfer)
803{
804 const u8 *tx = xfer->tx_buf;
805 unsigned int n = xfer->len;
806 unsigned int i, len;
807 int ret;
808
809 if (rspi->ctlr->can_dma && __rspi_can_dma(rspi, xfer)) {
810 ret = rspi_dma_transfer(rspi, &xfer->tx_sg, NULL);
811 if (ret != -EAGAIN)
812 return ret;
813 }
814
815 while (n > 0) {
816 len = qspi_set_send_trigger(rspi, n);
817 ret = rspi_wait_for_tx_empty(rspi);
818 if (ret < 0) {
819 dev_err(&rspi->ctlr->dev, "transmit timeout\n");
820 return ret;
821 }
822 for (i = 0; i < len; i++)
823 rspi_write_data(rspi, *tx++);
824
825 n -= len;
826 }
827
828 /* Wait for the last transmission */
829 rspi_wait_for_tx_empty(rspi);
830
831 return 0;
832}
833
834static int qspi_transfer_in(struct rspi_data *rspi, struct spi_transfer *xfer)
835{
836 u8 *rx = xfer->rx_buf;
837 unsigned int n = xfer->len;
838 unsigned int i, len;
839 int ret;
840
841 if (rspi->ctlr->can_dma && __rspi_can_dma(rspi, xfer)) {
842 ret = rspi_dma_transfer(rspi, NULL, &xfer->rx_sg);
843 if (ret != -EAGAIN)
844 return ret;
845 }
846
847 while (n > 0) {
848 len = qspi_set_receive_trigger(rspi, n);
849 ret = rspi_wait_for_rx_full(rspi);
850 if (ret < 0) {
851 dev_err(&rspi->ctlr->dev, "receive timeout\n");
852 return ret;
853 }
854 for (i = 0; i < len; i++)
855 *rx++ = rspi_read_data(rspi);
856
857 n -= len;
858 }
859
860 return 0;
861}
862
863static int qspi_transfer_one(struct spi_controller *ctlr,
864 struct spi_device *spi, struct spi_transfer *xfer)
865{
866 struct rspi_data *rspi = spi_controller_get_devdata(ctlr);
867
868 xfer->effective_speed_hz = rspi->speed_hz;
869 if (spi->mode & SPI_LOOP) {
870 return qspi_transfer_out_in(rspi, xfer);
871 } else if (xfer->tx_nbits > SPI_NBITS_SINGLE) {
872 /* Quad or Dual SPI Write */
873 return qspi_transfer_out(rspi, xfer);
874 } else if (xfer->rx_nbits > SPI_NBITS_SINGLE) {
875 /* Quad or Dual SPI Read */
876 return qspi_transfer_in(rspi, xfer);
877 } else {
878 /* Single SPI Transfer */
879 return qspi_transfer_out_in(rspi, xfer);
880 }
881}
882
883static u16 qspi_transfer_mode(const struct spi_transfer *xfer)
884{
885 if (xfer->tx_buf)
886 switch (xfer->tx_nbits) {
887 case SPI_NBITS_QUAD:
888 return SPCMD_SPIMOD_QUAD;
889 case SPI_NBITS_DUAL:
890 return SPCMD_SPIMOD_DUAL;
891 default:
892 return 0;
893 }
894 if (xfer->rx_buf)
895 switch (xfer->rx_nbits) {
896 case SPI_NBITS_QUAD:
897 return SPCMD_SPIMOD_QUAD | SPCMD_SPRW;
898 case SPI_NBITS_DUAL:
899 return SPCMD_SPIMOD_DUAL | SPCMD_SPRW;
900 default:
901 return 0;
902 }
903
904 return 0;
905}
906
907static int qspi_setup_sequencer(struct rspi_data *rspi,
908 const struct spi_message *msg)
909{
910 const struct spi_transfer *xfer;
911 unsigned int i = 0, len = 0;
912 u16 current_mode = 0xffff, mode;
913
914 list_for_each_entry(xfer, &msg->transfers, transfer_list) {
915 mode = qspi_transfer_mode(xfer);
916 if (mode == current_mode) {
917 len += xfer->len;
918 continue;
919 }
920
921 /* Transfer mode change */
922 if (i) {
923 /* Set transfer data length of previous transfer */
924 rspi_write32(rspi, len, QSPI_SPBMUL(i - 1));
925 }
926
927 if (i >= QSPI_NUM_SPCMD) {
928 dev_err(&msg->spi->dev,
929 "Too many different transfer modes");
930 return -EINVAL;
931 }
932
933 /* Program transfer mode for this transfer */
934 rspi_write16(rspi, rspi->spcmd | mode, RSPI_SPCMD(i));
935 current_mode = mode;
936 len = xfer->len;
937 i++;
938 }
939 if (i) {
940 /* Set final transfer data length and sequence length */
941 rspi_write32(rspi, len, QSPI_SPBMUL(i - 1));
942 rspi_write8(rspi, i - 1, RSPI_SPSCR);
943 }
944
945 return 0;
946}
947
948static int rspi_setup(struct spi_device *spi)
949{
950 struct rspi_data *rspi = spi_controller_get_devdata(spi->controller);
951 u8 sslp;
952
953 if (spi_get_csgpiod(spi, 0))
954 return 0;
955
956 pm_runtime_get_sync(&rspi->pdev->dev);
957 spin_lock_irq(&rspi->lock);
958
959 sslp = rspi_read8(rspi, RSPI_SSLP);
960 if (spi->mode & SPI_CS_HIGH)
961 sslp |= SSLP_SSLP(spi_get_chipselect(spi, 0));
962 else
963 sslp &= ~SSLP_SSLP(spi_get_chipselect(spi, 0));
964 rspi_write8(rspi, sslp, RSPI_SSLP);
965
966 spin_unlock_irq(&rspi->lock);
967 pm_runtime_put(&rspi->pdev->dev);
968 return 0;
969}
970
971static int rspi_prepare_message(struct spi_controller *ctlr,
972 struct spi_message *msg)
973{
974 struct rspi_data *rspi = spi_controller_get_devdata(ctlr);
975 struct spi_device *spi = msg->spi;
976 const struct spi_transfer *xfer;
977 int ret;
978
979 /*
980 * As the Bit Rate Register must not be changed while the device is
981 * active, all transfers in a message must use the same bit rate.
982 * In theory, the sequencer could be enabled, and each Command Register
983 * could divide the base bit rate by a different value.
984 * However, most RSPI variants do not have Transfer Data Length
985 * Multiplier Setting Registers, so each sequence step would be limited
986 * to a single word, making this feature unsuitable for large
987 * transfers, which would gain most from it.
988 */
989 rspi->speed_hz = spi->max_speed_hz;
990 list_for_each_entry(xfer, &msg->transfers, transfer_list) {
991 if (xfer->speed_hz < rspi->speed_hz)
992 rspi->speed_hz = xfer->speed_hz;
993 }
994
995 rspi->spcmd = SPCMD_SSLKP;
996 if (spi->mode & SPI_CPOL)
997 rspi->spcmd |= SPCMD_CPOL;
998 if (spi->mode & SPI_CPHA)
999 rspi->spcmd |= SPCMD_CPHA;
1000 if (spi->mode & SPI_LSB_FIRST)
1001 rspi->spcmd |= SPCMD_LSBF;
1002
1003 /* Configure slave signal to assert */
1004 rspi->spcmd |= SPCMD_SSLA(spi_get_csgpiod(spi, 0) ? rspi->ctlr->unused_native_cs
1005 : spi_get_chipselect(spi, 0));
1006
1007 /* CMOS output mode and MOSI signal from previous transfer */
1008 rspi->sppcr = 0;
1009 if (spi->mode & SPI_LOOP)
1010 rspi->sppcr |= SPPCR_SPLP;
1011
1012 rspi->ops->set_config_register(rspi, 8);
1013
1014 if (msg->spi->mode &
1015 (SPI_TX_DUAL | SPI_TX_QUAD | SPI_RX_DUAL | SPI_RX_QUAD)) {
1016 /* Setup sequencer for messages with multiple transfer modes */
1017 ret = qspi_setup_sequencer(rspi, msg);
1018 if (ret < 0)
1019 return ret;
1020 }
1021
1022 /* Enable SPI function in master mode */
1023 rspi_write8(rspi, rspi_read8(rspi, RSPI_SPCR) | SPCR_SPE, RSPI_SPCR);
1024 return 0;
1025}
1026
1027static int rspi_unprepare_message(struct spi_controller *ctlr,
1028 struct spi_message *msg)
1029{
1030 struct rspi_data *rspi = spi_controller_get_devdata(ctlr);
1031
1032 /* Disable SPI function */
1033 rspi_write8(rspi, rspi_read8(rspi, RSPI_SPCR) & ~SPCR_SPE, RSPI_SPCR);
1034
1035 /* Reset sequencer for Single SPI Transfers */
1036 rspi_write16(rspi, rspi->spcmd, RSPI_SPCMD0);
1037 rspi_write8(rspi, 0, RSPI_SPSCR);
1038 return 0;
1039}
1040
1041static irqreturn_t rspi_irq_mux(int irq, void *_sr)
1042{
1043 struct rspi_data *rspi = _sr;
1044 u8 spsr;
1045 irqreturn_t ret = IRQ_NONE;
1046 u8 disable_irq = 0;
1047
1048 rspi->spsr = spsr = rspi_read8(rspi, RSPI_SPSR);
1049 if (spsr & SPSR_SPRF)
1050 disable_irq |= SPCR_SPRIE;
1051 if (spsr & SPSR_SPTEF)
1052 disable_irq |= SPCR_SPTIE;
1053
1054 if (disable_irq) {
1055 ret = IRQ_HANDLED;
1056 rspi_disable_irq(rspi, disable_irq);
1057 wake_up(&rspi->wait);
1058 }
1059
1060 return ret;
1061}
1062
1063static irqreturn_t rspi_irq_rx(int irq, void *_sr)
1064{
1065 struct rspi_data *rspi = _sr;
1066 u8 spsr;
1067
1068 rspi->spsr = spsr = rspi_read8(rspi, RSPI_SPSR);
1069 if (spsr & SPSR_SPRF) {
1070 rspi_disable_irq(rspi, SPCR_SPRIE);
1071 wake_up(&rspi->wait);
1072 return IRQ_HANDLED;
1073 }
1074
1075 return 0;
1076}
1077
1078static irqreturn_t rspi_irq_tx(int irq, void *_sr)
1079{
1080 struct rspi_data *rspi = _sr;
1081 u8 spsr;
1082
1083 rspi->spsr = spsr = rspi_read8(rspi, RSPI_SPSR);
1084 if (spsr & SPSR_SPTEF) {
1085 rspi_disable_irq(rspi, SPCR_SPTIE);
1086 wake_up(&rspi->wait);
1087 return IRQ_HANDLED;
1088 }
1089
1090 return 0;
1091}
1092
1093static struct dma_chan *rspi_request_dma_chan(struct device *dev,
1094 enum dma_transfer_direction dir,
1095 unsigned int id,
1096 dma_addr_t port_addr)
1097{
1098 dma_cap_mask_t mask;
1099 struct dma_chan *chan;
1100 struct dma_slave_config cfg;
1101 int ret;
1102
1103 dma_cap_zero(mask);
1104 dma_cap_set(DMA_SLAVE, mask);
1105
1106 chan = dma_request_slave_channel_compat(mask, shdma_chan_filter,
1107 (void *)(unsigned long)id, dev,
1108 dir == DMA_MEM_TO_DEV ? "tx" : "rx");
1109 if (!chan) {
1110 dev_warn(dev, "dma_request_slave_channel_compat failed\n");
1111 return NULL;
1112 }
1113
1114 memset(&cfg, 0, sizeof(cfg));
1115 cfg.dst_addr = port_addr + RSPI_SPDR;
1116 cfg.src_addr = port_addr + RSPI_SPDR;
1117 cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
1118 cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
1119 cfg.direction = dir;
1120
1121 ret = dmaengine_slave_config(chan, &cfg);
1122 if (ret) {
1123 dev_warn(dev, "dmaengine_slave_config failed %d\n", ret);
1124 dma_release_channel(chan);
1125 return NULL;
1126 }
1127
1128 return chan;
1129}
1130
1131static int rspi_request_dma(struct device *dev, struct spi_controller *ctlr,
1132 const struct resource *res)
1133{
1134 const struct rspi_plat_data *rspi_pd = dev_get_platdata(dev);
1135 unsigned int dma_tx_id, dma_rx_id;
1136
1137 if (dev->of_node) {
1138 /* In the OF case we will get the slave IDs from the DT */
1139 dma_tx_id = 0;
1140 dma_rx_id = 0;
1141 } else if (rspi_pd && rspi_pd->dma_tx_id && rspi_pd->dma_rx_id) {
1142 dma_tx_id = rspi_pd->dma_tx_id;
1143 dma_rx_id = rspi_pd->dma_rx_id;
1144 } else {
1145 /* The driver assumes no error. */
1146 return 0;
1147 }
1148
1149 ctlr->dma_tx = rspi_request_dma_chan(dev, DMA_MEM_TO_DEV, dma_tx_id,
1150 res->start);
1151 if (!ctlr->dma_tx)
1152 return -ENODEV;
1153
1154 ctlr->dma_rx = rspi_request_dma_chan(dev, DMA_DEV_TO_MEM, dma_rx_id,
1155 res->start);
1156 if (!ctlr->dma_rx) {
1157 dma_release_channel(ctlr->dma_tx);
1158 ctlr->dma_tx = NULL;
1159 return -ENODEV;
1160 }
1161
1162 ctlr->can_dma = rspi_can_dma;
1163 dev_info(dev, "DMA available");
1164 return 0;
1165}
1166
1167static void rspi_release_dma(struct spi_controller *ctlr)
1168{
1169 if (ctlr->dma_tx)
1170 dma_release_channel(ctlr->dma_tx);
1171 if (ctlr->dma_rx)
1172 dma_release_channel(ctlr->dma_rx);
1173}
1174
1175static void rspi_remove(struct platform_device *pdev)
1176{
1177 struct rspi_data *rspi = platform_get_drvdata(pdev);
1178
1179 rspi_release_dma(rspi->ctlr);
1180 pm_runtime_disable(&pdev->dev);
1181}
1182
1183static const struct spi_ops rspi_ops = {
1184 .set_config_register = rspi_set_config_register,
1185 .transfer_one = rspi_transfer_one,
1186 .min_div = 2,
1187 .max_div = 4096,
1188 .flags = SPI_CONTROLLER_MUST_TX,
1189 .fifo_size = 8,
1190 .num_hw_ss = 2,
1191};
1192
1193static const struct spi_ops rspi_rz_ops __maybe_unused = {
1194 .set_config_register = rspi_rz_set_config_register,
1195 .transfer_one = rspi_rz_transfer_one,
1196 .min_div = 2,
1197 .max_div = 4096,
1198 .flags = SPI_CONTROLLER_MUST_RX | SPI_CONTROLLER_MUST_TX,
1199 .fifo_size = 8, /* 8 for TX, 32 for RX */
1200 .num_hw_ss = 1,
1201};
1202
1203static const struct spi_ops qspi_ops __maybe_unused = {
1204 .set_config_register = qspi_set_config_register,
1205 .transfer_one = qspi_transfer_one,
1206 .extra_mode_bits = SPI_TX_DUAL | SPI_TX_QUAD |
1207 SPI_RX_DUAL | SPI_RX_QUAD,
1208 .min_div = 1,
1209 .max_div = 4080,
1210 .flags = SPI_CONTROLLER_MUST_RX | SPI_CONTROLLER_MUST_TX,
1211 .fifo_size = 32,
1212 .num_hw_ss = 1,
1213};
1214
1215static const struct of_device_id rspi_of_match[] __maybe_unused = {
1216 /* RSPI on legacy SH */
1217 { .compatible = "renesas,rspi", .data = &rspi_ops },
1218 /* RSPI on RZ/A1H */
1219 { .compatible = "renesas,rspi-rz", .data = &rspi_rz_ops },
1220 /* QSPI on R-Car Gen2 */
1221 { .compatible = "renesas,qspi", .data = &qspi_ops },
1222 { /* sentinel */ }
1223};
1224
1225MODULE_DEVICE_TABLE(of, rspi_of_match);
1226
1227#ifdef CONFIG_OF
1228static void rspi_reset_control_assert(void *data)
1229{
1230 reset_control_assert(data);
1231}
1232
1233static int rspi_parse_dt(struct device *dev, struct spi_controller *ctlr)
1234{
1235 struct reset_control *rstc;
1236 u32 num_cs;
1237 int error;
1238
1239 /* Parse DT properties */
1240 error = of_property_read_u32(dev->of_node, "num-cs", &num_cs);
1241 if (error) {
1242 dev_err(dev, "of_property_read_u32 num-cs failed %d\n", error);
1243 return error;
1244 }
1245
1246 ctlr->num_chipselect = num_cs;
1247
1248 rstc = devm_reset_control_get_optional_exclusive(dev, NULL);
1249 if (IS_ERR(rstc))
1250 return dev_err_probe(dev, PTR_ERR(rstc),
1251 "failed to get reset ctrl\n");
1252
1253 error = reset_control_deassert(rstc);
1254 if (error) {
1255 dev_err(dev, "failed to deassert reset %d\n", error);
1256 return error;
1257 }
1258
1259 error = devm_add_action_or_reset(dev, rspi_reset_control_assert, rstc);
1260 if (error) {
1261 dev_err(dev, "failed to register assert devm action, %d\n", error);
1262 return error;
1263 }
1264
1265 return 0;
1266}
1267#else
1268#define rspi_of_match NULL
1269static inline int rspi_parse_dt(struct device *dev, struct spi_controller *ctlr)
1270{
1271 return -EINVAL;
1272}
1273#endif /* CONFIG_OF */
1274
1275static int rspi_request_irq(struct device *dev, unsigned int irq,
1276 irq_handler_t handler, const char *suffix,
1277 void *dev_id)
1278{
1279 const char *name = devm_kasprintf(dev, GFP_KERNEL, "%s:%s",
1280 dev_name(dev), suffix);
1281 if (!name)
1282 return -ENOMEM;
1283
1284 return devm_request_irq(dev, irq, handler, 0, name, dev_id);
1285}
1286
1287static int rspi_probe(struct platform_device *pdev)
1288{
1289 struct resource *res;
1290 struct spi_controller *ctlr;
1291 struct rspi_data *rspi;
1292 int ret;
1293 const struct rspi_plat_data *rspi_pd;
1294 const struct spi_ops *ops;
1295 unsigned long clksrc;
1296
1297 ctlr = spi_alloc_host(&pdev->dev, sizeof(struct rspi_data));
1298 if (ctlr == NULL)
1299 return -ENOMEM;
1300
1301 ops = of_device_get_match_data(&pdev->dev);
1302 if (ops) {
1303 ret = rspi_parse_dt(&pdev->dev, ctlr);
1304 if (ret)
1305 goto error1;
1306 } else {
1307 ops = (struct spi_ops *)pdev->id_entry->driver_data;
1308 rspi_pd = dev_get_platdata(&pdev->dev);
1309 if (rspi_pd && rspi_pd->num_chipselect)
1310 ctlr->num_chipselect = rspi_pd->num_chipselect;
1311 else
1312 ctlr->num_chipselect = 2; /* default */
1313 }
1314
1315 rspi = spi_controller_get_devdata(ctlr);
1316 platform_set_drvdata(pdev, rspi);
1317 rspi->ops = ops;
1318 rspi->ctlr = ctlr;
1319
1320 rspi->addr = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
1321 if (IS_ERR(rspi->addr)) {
1322 ret = PTR_ERR(rspi->addr);
1323 goto error1;
1324 }
1325
1326 rspi->clk = devm_clk_get(&pdev->dev, NULL);
1327 if (IS_ERR(rspi->clk)) {
1328 dev_err(&pdev->dev, "cannot get clock\n");
1329 ret = PTR_ERR(rspi->clk);
1330 goto error1;
1331 }
1332
1333 rspi->pdev = pdev;
1334 pm_runtime_enable(&pdev->dev);
1335
1336 init_waitqueue_head(&rspi->wait);
1337 spin_lock_init(&rspi->lock);
1338
1339 ctlr->bus_num = pdev->id;
1340 ctlr->setup = rspi_setup;
1341 ctlr->auto_runtime_pm = true;
1342 ctlr->transfer_one = ops->transfer_one;
1343 ctlr->prepare_message = rspi_prepare_message;
1344 ctlr->unprepare_message = rspi_unprepare_message;
1345 ctlr->mode_bits = SPI_CPHA | SPI_CPOL | SPI_CS_HIGH | SPI_LSB_FIRST |
1346 SPI_LOOP | ops->extra_mode_bits;
1347 clksrc = clk_get_rate(rspi->clk);
1348 ctlr->min_speed_hz = DIV_ROUND_UP(clksrc, ops->max_div);
1349 ctlr->max_speed_hz = DIV_ROUND_UP(clksrc, ops->min_div);
1350 ctlr->flags = ops->flags;
1351 ctlr->dev.of_node = pdev->dev.of_node;
1352 ctlr->use_gpio_descriptors = true;
1353 ctlr->max_native_cs = rspi->ops->num_hw_ss;
1354
1355 ret = platform_get_irq_byname_optional(pdev, "rx");
1356 if (ret < 0) {
1357 ret = platform_get_irq_byname_optional(pdev, "mux");
1358 if (ret < 0)
1359 ret = platform_get_irq(pdev, 0);
1360 if (ret >= 0)
1361 rspi->rx_irq = rspi->tx_irq = ret;
1362 } else {
1363 rspi->rx_irq = ret;
1364 ret = platform_get_irq_byname(pdev, "tx");
1365 if (ret >= 0)
1366 rspi->tx_irq = ret;
1367 }
1368
1369 if (rspi->rx_irq == rspi->tx_irq) {
1370 /* Single multiplexed interrupt */
1371 ret = rspi_request_irq(&pdev->dev, rspi->rx_irq, rspi_irq_mux,
1372 "mux", rspi);
1373 } else {
1374 /* Multi-interrupt mode, only SPRI and SPTI are used */
1375 ret = rspi_request_irq(&pdev->dev, rspi->rx_irq, rspi_irq_rx,
1376 "rx", rspi);
1377 if (!ret)
1378 ret = rspi_request_irq(&pdev->dev, rspi->tx_irq,
1379 rspi_irq_tx, "tx", rspi);
1380 }
1381 if (ret < 0) {
1382 dev_err(&pdev->dev, "request_irq error\n");
1383 goto error2;
1384 }
1385
1386 ret = rspi_request_dma(&pdev->dev, ctlr, res);
1387 if (ret < 0)
1388 dev_warn(&pdev->dev, "DMA not available, using PIO\n");
1389
1390 ret = devm_spi_register_controller(&pdev->dev, ctlr);
1391 if (ret < 0) {
1392 dev_err(&pdev->dev, "devm_spi_register_controller error.\n");
1393 goto error3;
1394 }
1395
1396 dev_info(&pdev->dev, "probed\n");
1397
1398 return 0;
1399
1400error3:
1401 rspi_release_dma(ctlr);
1402error2:
1403 pm_runtime_disable(&pdev->dev);
1404error1:
1405 spi_controller_put(ctlr);
1406
1407 return ret;
1408}
1409
1410static const struct platform_device_id spi_driver_ids[] = {
1411 { "rspi", (kernel_ulong_t)&rspi_ops },
1412 {},
1413};
1414
1415MODULE_DEVICE_TABLE(platform, spi_driver_ids);
1416
1417#ifdef CONFIG_PM_SLEEP
1418static int rspi_suspend(struct device *dev)
1419{
1420 struct rspi_data *rspi = dev_get_drvdata(dev);
1421
1422 return spi_controller_suspend(rspi->ctlr);
1423}
1424
1425static int rspi_resume(struct device *dev)
1426{
1427 struct rspi_data *rspi = dev_get_drvdata(dev);
1428
1429 return spi_controller_resume(rspi->ctlr);
1430}
1431
1432static SIMPLE_DEV_PM_OPS(rspi_pm_ops, rspi_suspend, rspi_resume);
1433#define DEV_PM_OPS &rspi_pm_ops
1434#else
1435#define DEV_PM_OPS NULL
1436#endif /* CONFIG_PM_SLEEP */
1437
1438static struct platform_driver rspi_driver = {
1439 .probe = rspi_probe,
1440 .remove_new = rspi_remove,
1441 .id_table = spi_driver_ids,
1442 .driver = {
1443 .name = "renesas_spi",
1444 .pm = DEV_PM_OPS,
1445 .of_match_table = of_match_ptr(rspi_of_match),
1446 },
1447};
1448module_platform_driver(rspi_driver);
1449
1450MODULE_DESCRIPTION("Renesas RSPI bus driver");
1451MODULE_LICENSE("GPL v2");
1452MODULE_AUTHOR("Yoshihiro Shimoda");
1/*
2 * SH RSPI driver
3 *
4 * Copyright (C) 2012, 2013 Renesas Solutions Corp.
5 * Copyright (C) 2014 Glider bvba
6 *
7 * Based on spi-sh.c:
8 * Copyright (C) 2011 Renesas Solutions Corp.
9 *
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; version 2 of the License.
13 *
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 */
19
20#include <linux/module.h>
21#include <linux/kernel.h>
22#include <linux/sched.h>
23#include <linux/errno.h>
24#include <linux/interrupt.h>
25#include <linux/platform_device.h>
26#include <linux/io.h>
27#include <linux/clk.h>
28#include <linux/dmaengine.h>
29#include <linux/dma-mapping.h>
30#include <linux/of_device.h>
31#include <linux/pm_runtime.h>
32#include <linux/sh_dma.h>
33#include <linux/spi/spi.h>
34#include <linux/spi/rspi.h>
35
36#define RSPI_SPCR 0x00 /* Control Register */
37#define RSPI_SSLP 0x01 /* Slave Select Polarity Register */
38#define RSPI_SPPCR 0x02 /* Pin Control Register */
39#define RSPI_SPSR 0x03 /* Status Register */
40#define RSPI_SPDR 0x04 /* Data Register */
41#define RSPI_SPSCR 0x08 /* Sequence Control Register */
42#define RSPI_SPSSR 0x09 /* Sequence Status Register */
43#define RSPI_SPBR 0x0a /* Bit Rate Register */
44#define RSPI_SPDCR 0x0b /* Data Control Register */
45#define RSPI_SPCKD 0x0c /* Clock Delay Register */
46#define RSPI_SSLND 0x0d /* Slave Select Negation Delay Register */
47#define RSPI_SPND 0x0e /* Next-Access Delay Register */
48#define RSPI_SPCR2 0x0f /* Control Register 2 (SH only) */
49#define RSPI_SPCMD0 0x10 /* Command Register 0 */
50#define RSPI_SPCMD1 0x12 /* Command Register 1 */
51#define RSPI_SPCMD2 0x14 /* Command Register 2 */
52#define RSPI_SPCMD3 0x16 /* Command Register 3 */
53#define RSPI_SPCMD4 0x18 /* Command Register 4 */
54#define RSPI_SPCMD5 0x1a /* Command Register 5 */
55#define RSPI_SPCMD6 0x1c /* Command Register 6 */
56#define RSPI_SPCMD7 0x1e /* Command Register 7 */
57#define RSPI_SPCMD(i) (RSPI_SPCMD0 + (i) * 2)
58#define RSPI_NUM_SPCMD 8
59#define RSPI_RZ_NUM_SPCMD 4
60#define QSPI_NUM_SPCMD 4
61
62/* RSPI on RZ only */
63#define RSPI_SPBFCR 0x20 /* Buffer Control Register */
64#define RSPI_SPBFDR 0x22 /* Buffer Data Count Setting Register */
65
66/* QSPI only */
67#define QSPI_SPBFCR 0x18 /* Buffer Control Register */
68#define QSPI_SPBDCR 0x1a /* Buffer Data Count Register */
69#define QSPI_SPBMUL0 0x1c /* Transfer Data Length Multiplier Setting Register 0 */
70#define QSPI_SPBMUL1 0x20 /* Transfer Data Length Multiplier Setting Register 1 */
71#define QSPI_SPBMUL2 0x24 /* Transfer Data Length Multiplier Setting Register 2 */
72#define QSPI_SPBMUL3 0x28 /* Transfer Data Length Multiplier Setting Register 3 */
73#define QSPI_SPBMUL(i) (QSPI_SPBMUL0 + (i) * 4)
74
75/* SPCR - Control Register */
76#define SPCR_SPRIE 0x80 /* Receive Interrupt Enable */
77#define SPCR_SPE 0x40 /* Function Enable */
78#define SPCR_SPTIE 0x20 /* Transmit Interrupt Enable */
79#define SPCR_SPEIE 0x10 /* Error Interrupt Enable */
80#define SPCR_MSTR 0x08 /* Master/Slave Mode Select */
81#define SPCR_MODFEN 0x04 /* Mode Fault Error Detection Enable */
82/* RSPI on SH only */
83#define SPCR_TXMD 0x02 /* TX Only Mode (vs. Full Duplex) */
84#define SPCR_SPMS 0x01 /* 3-wire Mode (vs. 4-wire) */
85/* QSPI on R-Car Gen2 only */
86#define SPCR_WSWAP 0x02 /* Word Swap of read-data for DMAC */
87#define SPCR_BSWAP 0x01 /* Byte Swap of read-data for DMAC */
88
89/* SSLP - Slave Select Polarity Register */
90#define SSLP_SSL1P 0x02 /* SSL1 Signal Polarity Setting */
91#define SSLP_SSL0P 0x01 /* SSL0 Signal Polarity Setting */
92
93/* SPPCR - Pin Control Register */
94#define SPPCR_MOIFE 0x20 /* MOSI Idle Value Fixing Enable */
95#define SPPCR_MOIFV 0x10 /* MOSI Idle Fixed Value */
96#define SPPCR_SPOM 0x04
97#define SPPCR_SPLP2 0x02 /* Loopback Mode 2 (non-inverting) */
98#define SPPCR_SPLP 0x01 /* Loopback Mode (inverting) */
99
100#define SPPCR_IO3FV 0x04 /* Single-/Dual-SPI Mode IO3 Output Fixed Value */
101#define SPPCR_IO2FV 0x04 /* Single-/Dual-SPI Mode IO2 Output Fixed Value */
102
103/* SPSR - Status Register */
104#define SPSR_SPRF 0x80 /* Receive Buffer Full Flag */
105#define SPSR_TEND 0x40 /* Transmit End */
106#define SPSR_SPTEF 0x20 /* Transmit Buffer Empty Flag */
107#define SPSR_PERF 0x08 /* Parity Error Flag */
108#define SPSR_MODF 0x04 /* Mode Fault Error Flag */
109#define SPSR_IDLNF 0x02 /* RSPI Idle Flag */
110#define SPSR_OVRF 0x01 /* Overrun Error Flag (RSPI only) */
111
112/* SPSCR - Sequence Control Register */
113#define SPSCR_SPSLN_MASK 0x07 /* Sequence Length Specification */
114
115/* SPSSR - Sequence Status Register */
116#define SPSSR_SPECM_MASK 0x70 /* Command Error Mask */
117#define SPSSR_SPCP_MASK 0x07 /* Command Pointer Mask */
118
119/* SPDCR - Data Control Register */
120#define SPDCR_TXDMY 0x80 /* Dummy Data Transmission Enable */
121#define SPDCR_SPLW1 0x40 /* Access Width Specification (RZ) */
122#define SPDCR_SPLW0 0x20 /* Access Width Specification (RZ) */
123#define SPDCR_SPLLWORD (SPDCR_SPLW1 | SPDCR_SPLW0)
124#define SPDCR_SPLWORD SPDCR_SPLW1
125#define SPDCR_SPLBYTE SPDCR_SPLW0
126#define SPDCR_SPLW 0x20 /* Access Width Specification (SH) */
127#define SPDCR_SPRDTD 0x10 /* Receive Transmit Data Select (SH) */
128#define SPDCR_SLSEL1 0x08
129#define SPDCR_SLSEL0 0x04
130#define SPDCR_SLSEL_MASK 0x0c /* SSL1 Output Select (SH) */
131#define SPDCR_SPFC1 0x02
132#define SPDCR_SPFC0 0x01
133#define SPDCR_SPFC_MASK 0x03 /* Frame Count Setting (1-4) (SH) */
134
135/* SPCKD - Clock Delay Register */
136#define SPCKD_SCKDL_MASK 0x07 /* Clock Delay Setting (1-8) */
137
138/* SSLND - Slave Select Negation Delay Register */
139#define SSLND_SLNDL_MASK 0x07 /* SSL Negation Delay Setting (1-8) */
140
141/* SPND - Next-Access Delay Register */
142#define SPND_SPNDL_MASK 0x07 /* Next-Access Delay Setting (1-8) */
143
144/* SPCR2 - Control Register 2 */
145#define SPCR2_PTE 0x08 /* Parity Self-Test Enable */
146#define SPCR2_SPIE 0x04 /* Idle Interrupt Enable */
147#define SPCR2_SPOE 0x02 /* Odd Parity Enable (vs. Even) */
148#define SPCR2_SPPE 0x01 /* Parity Enable */
149
150/* SPCMDn - Command Registers */
151#define SPCMD_SCKDEN 0x8000 /* Clock Delay Setting Enable */
152#define SPCMD_SLNDEN 0x4000 /* SSL Negation Delay Setting Enable */
153#define SPCMD_SPNDEN 0x2000 /* Next-Access Delay Enable */
154#define SPCMD_LSBF 0x1000 /* LSB First */
155#define SPCMD_SPB_MASK 0x0f00 /* Data Length Setting */
156#define SPCMD_SPB_8_TO_16(bit) (((bit - 1) << 8) & SPCMD_SPB_MASK)
157#define SPCMD_SPB_8BIT 0x0000 /* QSPI only */
158#define SPCMD_SPB_16BIT 0x0100
159#define SPCMD_SPB_20BIT 0x0000
160#define SPCMD_SPB_24BIT 0x0100
161#define SPCMD_SPB_32BIT 0x0200
162#define SPCMD_SSLKP 0x0080 /* SSL Signal Level Keeping */
163#define SPCMD_SPIMOD_MASK 0x0060 /* SPI Operating Mode (QSPI only) */
164#define SPCMD_SPIMOD1 0x0040
165#define SPCMD_SPIMOD0 0x0020
166#define SPCMD_SPIMOD_SINGLE 0
167#define SPCMD_SPIMOD_DUAL SPCMD_SPIMOD0
168#define SPCMD_SPIMOD_QUAD SPCMD_SPIMOD1
169#define SPCMD_SPRW 0x0010 /* SPI Read/Write Access (Dual/Quad) */
170#define SPCMD_SSLA_MASK 0x0030 /* SSL Assert Signal Setting (RSPI) */
171#define SPCMD_BRDV_MASK 0x000c /* Bit Rate Division Setting */
172#define SPCMD_CPOL 0x0002 /* Clock Polarity Setting */
173#define SPCMD_CPHA 0x0001 /* Clock Phase Setting */
174
175/* SPBFCR - Buffer Control Register */
176#define SPBFCR_TXRST 0x80 /* Transmit Buffer Data Reset */
177#define SPBFCR_RXRST 0x40 /* Receive Buffer Data Reset */
178#define SPBFCR_TXTRG_MASK 0x30 /* Transmit Buffer Data Triggering Number */
179#define SPBFCR_RXTRG_MASK 0x07 /* Receive Buffer Data Triggering Number */
180/* QSPI on R-Car Gen2 */
181#define SPBFCR_TXTRG_1B 0x00 /* 31 bytes (1 byte available) */
182#define SPBFCR_TXTRG_32B 0x30 /* 0 byte (32 bytes available) */
183#define SPBFCR_RXTRG_1B 0x00 /* 1 byte (31 bytes available) */
184#define SPBFCR_RXTRG_32B 0x07 /* 32 bytes (0 byte available) */
185
186#define QSPI_BUFFER_SIZE 32u
187
188struct rspi_data {
189 void __iomem *addr;
190 u32 max_speed_hz;
191 struct spi_master *master;
192 wait_queue_head_t wait;
193 struct clk *clk;
194 u16 spcmd;
195 u8 spsr;
196 u8 sppcr;
197 int rx_irq, tx_irq;
198 const struct spi_ops *ops;
199
200 unsigned dma_callbacked:1;
201 unsigned byte_access:1;
202};
203
204static void rspi_write8(const struct rspi_data *rspi, u8 data, u16 offset)
205{
206 iowrite8(data, rspi->addr + offset);
207}
208
209static void rspi_write16(const struct rspi_data *rspi, u16 data, u16 offset)
210{
211 iowrite16(data, rspi->addr + offset);
212}
213
214static void rspi_write32(const struct rspi_data *rspi, u32 data, u16 offset)
215{
216 iowrite32(data, rspi->addr + offset);
217}
218
219static u8 rspi_read8(const struct rspi_data *rspi, u16 offset)
220{
221 return ioread8(rspi->addr + offset);
222}
223
224static u16 rspi_read16(const struct rspi_data *rspi, u16 offset)
225{
226 return ioread16(rspi->addr + offset);
227}
228
229static void rspi_write_data(const struct rspi_data *rspi, u16 data)
230{
231 if (rspi->byte_access)
232 rspi_write8(rspi, data, RSPI_SPDR);
233 else /* 16 bit */
234 rspi_write16(rspi, data, RSPI_SPDR);
235}
236
237static u16 rspi_read_data(const struct rspi_data *rspi)
238{
239 if (rspi->byte_access)
240 return rspi_read8(rspi, RSPI_SPDR);
241 else /* 16 bit */
242 return rspi_read16(rspi, RSPI_SPDR);
243}
244
245/* optional functions */
246struct spi_ops {
247 int (*set_config_register)(struct rspi_data *rspi, int access_size);
248 int (*transfer_one)(struct spi_master *master, struct spi_device *spi,
249 struct spi_transfer *xfer);
250 u16 mode_bits;
251 u16 flags;
252 u16 fifo_size;
253};
254
255/*
256 * functions for RSPI on legacy SH
257 */
258static int rspi_set_config_register(struct rspi_data *rspi, int access_size)
259{
260 int spbr;
261
262 /* Sets output mode, MOSI signal, and (optionally) loopback */
263 rspi_write8(rspi, rspi->sppcr, RSPI_SPPCR);
264
265 /* Sets transfer bit rate */
266 spbr = DIV_ROUND_UP(clk_get_rate(rspi->clk),
267 2 * rspi->max_speed_hz) - 1;
268 rspi_write8(rspi, clamp(spbr, 0, 255), RSPI_SPBR);
269
270 /* Disable dummy transmission, set 16-bit word access, 1 frame */
271 rspi_write8(rspi, 0, RSPI_SPDCR);
272 rspi->byte_access = 0;
273
274 /* Sets RSPCK, SSL, next-access delay value */
275 rspi_write8(rspi, 0x00, RSPI_SPCKD);
276 rspi_write8(rspi, 0x00, RSPI_SSLND);
277 rspi_write8(rspi, 0x00, RSPI_SPND);
278
279 /* Sets parity, interrupt mask */
280 rspi_write8(rspi, 0x00, RSPI_SPCR2);
281
282 /* Sets SPCMD */
283 rspi->spcmd |= SPCMD_SPB_8_TO_16(access_size);
284 rspi_write16(rspi, rspi->spcmd, RSPI_SPCMD0);
285
286 /* Sets RSPI mode */
287 rspi_write8(rspi, SPCR_MSTR, RSPI_SPCR);
288
289 return 0;
290}
291
292/*
293 * functions for RSPI on RZ
294 */
295static int rspi_rz_set_config_register(struct rspi_data *rspi, int access_size)
296{
297 int spbr;
298 int div = 0;
299 unsigned long clksrc;
300
301 /* Sets output mode, MOSI signal, and (optionally) loopback */
302 rspi_write8(rspi, rspi->sppcr, RSPI_SPPCR);
303
304 clksrc = clk_get_rate(rspi->clk);
305 while (div < 3) {
306 if (rspi->max_speed_hz >= clksrc/4) /* 4=(CLK/2)/2 */
307 break;
308 div++;
309 clksrc /= 2;
310 }
311
312 /* Sets transfer bit rate */
313 spbr = DIV_ROUND_UP(clksrc, 2 * rspi->max_speed_hz) - 1;
314 rspi_write8(rspi, clamp(spbr, 0, 255), RSPI_SPBR);
315 rspi->spcmd |= div << 2;
316
317 /* Disable dummy transmission, set byte access */
318 rspi_write8(rspi, SPDCR_SPLBYTE, RSPI_SPDCR);
319 rspi->byte_access = 1;
320
321 /* Sets RSPCK, SSL, next-access delay value */
322 rspi_write8(rspi, 0x00, RSPI_SPCKD);
323 rspi_write8(rspi, 0x00, RSPI_SSLND);
324 rspi_write8(rspi, 0x00, RSPI_SPND);
325
326 /* Sets SPCMD */
327 rspi->spcmd |= SPCMD_SPB_8_TO_16(access_size);
328 rspi_write16(rspi, rspi->spcmd, RSPI_SPCMD0);
329
330 /* Sets RSPI mode */
331 rspi_write8(rspi, SPCR_MSTR, RSPI_SPCR);
332
333 return 0;
334}
335
336/*
337 * functions for QSPI
338 */
339static int qspi_set_config_register(struct rspi_data *rspi, int access_size)
340{
341 int spbr;
342
343 /* Sets output mode, MOSI signal, and (optionally) loopback */
344 rspi_write8(rspi, rspi->sppcr, RSPI_SPPCR);
345
346 /* Sets transfer bit rate */
347 spbr = DIV_ROUND_UP(clk_get_rate(rspi->clk), 2 * rspi->max_speed_hz);
348 rspi_write8(rspi, clamp(spbr, 0, 255), RSPI_SPBR);
349
350 /* Disable dummy transmission, set byte access */
351 rspi_write8(rspi, 0, RSPI_SPDCR);
352 rspi->byte_access = 1;
353
354 /* Sets RSPCK, SSL, next-access delay value */
355 rspi_write8(rspi, 0x00, RSPI_SPCKD);
356 rspi_write8(rspi, 0x00, RSPI_SSLND);
357 rspi_write8(rspi, 0x00, RSPI_SPND);
358
359 /* Data Length Setting */
360 if (access_size == 8)
361 rspi->spcmd |= SPCMD_SPB_8BIT;
362 else if (access_size == 16)
363 rspi->spcmd |= SPCMD_SPB_16BIT;
364 else
365 rspi->spcmd |= SPCMD_SPB_32BIT;
366
367 rspi->spcmd |= SPCMD_SCKDEN | SPCMD_SLNDEN | SPCMD_SPNDEN;
368
369 /* Resets transfer data length */
370 rspi_write32(rspi, 0, QSPI_SPBMUL0);
371
372 /* Resets transmit and receive buffer */
373 rspi_write8(rspi, SPBFCR_TXRST | SPBFCR_RXRST, QSPI_SPBFCR);
374 /* Sets buffer to allow normal operation */
375 rspi_write8(rspi, 0x00, QSPI_SPBFCR);
376
377 /* Sets SPCMD */
378 rspi_write16(rspi, rspi->spcmd, RSPI_SPCMD0);
379
380 /* Sets RSPI mode */
381 rspi_write8(rspi, SPCR_MSTR, RSPI_SPCR);
382
383 return 0;
384}
385
386static void qspi_update(const struct rspi_data *rspi, u8 mask, u8 val, u8 reg)
387{
388 u8 data;
389
390 data = rspi_read8(rspi, reg);
391 data &= ~mask;
392 data |= (val & mask);
393 rspi_write8(rspi, data, reg);
394}
395
396static unsigned int qspi_set_send_trigger(struct rspi_data *rspi,
397 unsigned int len)
398{
399 unsigned int n;
400
401 n = min(len, QSPI_BUFFER_SIZE);
402
403 if (len >= QSPI_BUFFER_SIZE) {
404 /* sets triggering number to 32 bytes */
405 qspi_update(rspi, SPBFCR_TXTRG_MASK,
406 SPBFCR_TXTRG_32B, QSPI_SPBFCR);
407 } else {
408 /* sets triggering number to 1 byte */
409 qspi_update(rspi, SPBFCR_TXTRG_MASK,
410 SPBFCR_TXTRG_1B, QSPI_SPBFCR);
411 }
412
413 return n;
414}
415
416static int qspi_set_receive_trigger(struct rspi_data *rspi, unsigned int len)
417{
418 unsigned int n;
419
420 n = min(len, QSPI_BUFFER_SIZE);
421
422 if (len >= QSPI_BUFFER_SIZE) {
423 /* sets triggering number to 32 bytes */
424 qspi_update(rspi, SPBFCR_RXTRG_MASK,
425 SPBFCR_RXTRG_32B, QSPI_SPBFCR);
426 } else {
427 /* sets triggering number to 1 byte */
428 qspi_update(rspi, SPBFCR_RXTRG_MASK,
429 SPBFCR_RXTRG_1B, QSPI_SPBFCR);
430 }
431 return n;
432}
433
434#define set_config_register(spi, n) spi->ops->set_config_register(spi, n)
435
436static void rspi_enable_irq(const struct rspi_data *rspi, u8 enable)
437{
438 rspi_write8(rspi, rspi_read8(rspi, RSPI_SPCR) | enable, RSPI_SPCR);
439}
440
441static void rspi_disable_irq(const struct rspi_data *rspi, u8 disable)
442{
443 rspi_write8(rspi, rspi_read8(rspi, RSPI_SPCR) & ~disable, RSPI_SPCR);
444}
445
446static int rspi_wait_for_interrupt(struct rspi_data *rspi, u8 wait_mask,
447 u8 enable_bit)
448{
449 int ret;
450
451 rspi->spsr = rspi_read8(rspi, RSPI_SPSR);
452 if (rspi->spsr & wait_mask)
453 return 0;
454
455 rspi_enable_irq(rspi, enable_bit);
456 ret = wait_event_timeout(rspi->wait, rspi->spsr & wait_mask, HZ);
457 if (ret == 0 && !(rspi->spsr & wait_mask))
458 return -ETIMEDOUT;
459
460 return 0;
461}
462
463static inline int rspi_wait_for_tx_empty(struct rspi_data *rspi)
464{
465 return rspi_wait_for_interrupt(rspi, SPSR_SPTEF, SPCR_SPTIE);
466}
467
468static inline int rspi_wait_for_rx_full(struct rspi_data *rspi)
469{
470 return rspi_wait_for_interrupt(rspi, SPSR_SPRF, SPCR_SPRIE);
471}
472
473static int rspi_data_out(struct rspi_data *rspi, u8 data)
474{
475 int error = rspi_wait_for_tx_empty(rspi);
476 if (error < 0) {
477 dev_err(&rspi->master->dev, "transmit timeout\n");
478 return error;
479 }
480 rspi_write_data(rspi, data);
481 return 0;
482}
483
484static int rspi_data_in(struct rspi_data *rspi)
485{
486 int error;
487 u8 data;
488
489 error = rspi_wait_for_rx_full(rspi);
490 if (error < 0) {
491 dev_err(&rspi->master->dev, "receive timeout\n");
492 return error;
493 }
494 data = rspi_read_data(rspi);
495 return data;
496}
497
498static int rspi_pio_transfer(struct rspi_data *rspi, const u8 *tx, u8 *rx,
499 unsigned int n)
500{
501 while (n-- > 0) {
502 if (tx) {
503 int ret = rspi_data_out(rspi, *tx++);
504 if (ret < 0)
505 return ret;
506 }
507 if (rx) {
508 int ret = rspi_data_in(rspi);
509 if (ret < 0)
510 return ret;
511 *rx++ = ret;
512 }
513 }
514
515 return 0;
516}
517
518static void rspi_dma_complete(void *arg)
519{
520 struct rspi_data *rspi = arg;
521
522 rspi->dma_callbacked = 1;
523 wake_up_interruptible(&rspi->wait);
524}
525
526static int rspi_dma_transfer(struct rspi_data *rspi, struct sg_table *tx,
527 struct sg_table *rx)
528{
529 struct dma_async_tx_descriptor *desc_tx = NULL, *desc_rx = NULL;
530 u8 irq_mask = 0;
531 unsigned int other_irq = 0;
532 dma_cookie_t cookie;
533 int ret;
534
535 /* First prepare and submit the DMA request(s), as this may fail */
536 if (rx) {
537 desc_rx = dmaengine_prep_slave_sg(rspi->master->dma_rx,
538 rx->sgl, rx->nents, DMA_DEV_TO_MEM,
539 DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
540 if (!desc_rx) {
541 ret = -EAGAIN;
542 goto no_dma_rx;
543 }
544
545 desc_rx->callback = rspi_dma_complete;
546 desc_rx->callback_param = rspi;
547 cookie = dmaengine_submit(desc_rx);
548 if (dma_submit_error(cookie)) {
549 ret = cookie;
550 goto no_dma_rx;
551 }
552
553 irq_mask |= SPCR_SPRIE;
554 }
555
556 if (tx) {
557 desc_tx = dmaengine_prep_slave_sg(rspi->master->dma_tx,
558 tx->sgl, tx->nents, DMA_MEM_TO_DEV,
559 DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
560 if (!desc_tx) {
561 ret = -EAGAIN;
562 goto no_dma_tx;
563 }
564
565 if (rx) {
566 /* No callback */
567 desc_tx->callback = NULL;
568 } else {
569 desc_tx->callback = rspi_dma_complete;
570 desc_tx->callback_param = rspi;
571 }
572 cookie = dmaengine_submit(desc_tx);
573 if (dma_submit_error(cookie)) {
574 ret = cookie;
575 goto no_dma_tx;
576 }
577
578 irq_mask |= SPCR_SPTIE;
579 }
580
581 /*
582 * DMAC needs SPxIE, but if SPxIE is set, the IRQ routine will be
583 * called. So, this driver disables the IRQ while DMA transfer.
584 */
585 if (tx)
586 disable_irq(other_irq = rspi->tx_irq);
587 if (rx && rspi->rx_irq != other_irq)
588 disable_irq(rspi->rx_irq);
589
590 rspi_enable_irq(rspi, irq_mask);
591 rspi->dma_callbacked = 0;
592
593 /* Now start DMA */
594 if (rx)
595 dma_async_issue_pending(rspi->master->dma_rx);
596 if (tx)
597 dma_async_issue_pending(rspi->master->dma_tx);
598
599 ret = wait_event_interruptible_timeout(rspi->wait,
600 rspi->dma_callbacked, HZ);
601 if (ret > 0 && rspi->dma_callbacked)
602 ret = 0;
603 else if (!ret) {
604 dev_err(&rspi->master->dev, "DMA timeout\n");
605 ret = -ETIMEDOUT;
606 if (tx)
607 dmaengine_terminate_all(rspi->master->dma_tx);
608 if (rx)
609 dmaengine_terminate_all(rspi->master->dma_rx);
610 }
611
612 rspi_disable_irq(rspi, irq_mask);
613
614 if (tx)
615 enable_irq(rspi->tx_irq);
616 if (rx && rspi->rx_irq != other_irq)
617 enable_irq(rspi->rx_irq);
618
619 return ret;
620
621no_dma_tx:
622 if (rx)
623 dmaengine_terminate_all(rspi->master->dma_rx);
624no_dma_rx:
625 if (ret == -EAGAIN) {
626 pr_warn_once("%s %s: DMA not available, falling back to PIO\n",
627 dev_driver_string(&rspi->master->dev),
628 dev_name(&rspi->master->dev));
629 }
630 return ret;
631}
632
633static void rspi_receive_init(const struct rspi_data *rspi)
634{
635 u8 spsr;
636
637 spsr = rspi_read8(rspi, RSPI_SPSR);
638 if (spsr & SPSR_SPRF)
639 rspi_read_data(rspi); /* dummy read */
640 if (spsr & SPSR_OVRF)
641 rspi_write8(rspi, rspi_read8(rspi, RSPI_SPSR) & ~SPSR_OVRF,
642 RSPI_SPSR);
643}
644
645static void rspi_rz_receive_init(const struct rspi_data *rspi)
646{
647 rspi_receive_init(rspi);
648 rspi_write8(rspi, SPBFCR_TXRST | SPBFCR_RXRST, RSPI_SPBFCR);
649 rspi_write8(rspi, 0, RSPI_SPBFCR);
650}
651
652static void qspi_receive_init(const struct rspi_data *rspi)
653{
654 u8 spsr;
655
656 spsr = rspi_read8(rspi, RSPI_SPSR);
657 if (spsr & SPSR_SPRF)
658 rspi_read_data(rspi); /* dummy read */
659 rspi_write8(rspi, SPBFCR_TXRST | SPBFCR_RXRST, QSPI_SPBFCR);
660 rspi_write8(rspi, 0, QSPI_SPBFCR);
661}
662
663static bool __rspi_can_dma(const struct rspi_data *rspi,
664 const struct spi_transfer *xfer)
665{
666 return xfer->len > rspi->ops->fifo_size;
667}
668
669static bool rspi_can_dma(struct spi_master *master, struct spi_device *spi,
670 struct spi_transfer *xfer)
671{
672 struct rspi_data *rspi = spi_master_get_devdata(master);
673
674 return __rspi_can_dma(rspi, xfer);
675}
676
677static int rspi_dma_check_then_transfer(struct rspi_data *rspi,
678 struct spi_transfer *xfer)
679{
680 if (!rspi->master->can_dma || !__rspi_can_dma(rspi, xfer))
681 return -EAGAIN;
682
683 /* rx_buf can be NULL on RSPI on SH in TX-only Mode */
684 return rspi_dma_transfer(rspi, &xfer->tx_sg,
685 xfer->rx_buf ? &xfer->rx_sg : NULL);
686}
687
688static int rspi_common_transfer(struct rspi_data *rspi,
689 struct spi_transfer *xfer)
690{
691 int ret;
692
693 ret = rspi_dma_check_then_transfer(rspi, xfer);
694 if (ret != -EAGAIN)
695 return ret;
696
697 ret = rspi_pio_transfer(rspi, xfer->tx_buf, xfer->rx_buf, xfer->len);
698 if (ret < 0)
699 return ret;
700
701 /* Wait for the last transmission */
702 rspi_wait_for_tx_empty(rspi);
703
704 return 0;
705}
706
707static int rspi_transfer_one(struct spi_master *master, struct spi_device *spi,
708 struct spi_transfer *xfer)
709{
710 struct rspi_data *rspi = spi_master_get_devdata(master);
711 u8 spcr;
712
713 spcr = rspi_read8(rspi, RSPI_SPCR);
714 if (xfer->rx_buf) {
715 rspi_receive_init(rspi);
716 spcr &= ~SPCR_TXMD;
717 } else {
718 spcr |= SPCR_TXMD;
719 }
720 rspi_write8(rspi, spcr, RSPI_SPCR);
721
722 return rspi_common_transfer(rspi, xfer);
723}
724
725static int rspi_rz_transfer_one(struct spi_master *master,
726 struct spi_device *spi,
727 struct spi_transfer *xfer)
728{
729 struct rspi_data *rspi = spi_master_get_devdata(master);
730
731 rspi_rz_receive_init(rspi);
732
733 return rspi_common_transfer(rspi, xfer);
734}
735
736static int qspi_trigger_transfer_out_in(struct rspi_data *rspi, const u8 *tx,
737 u8 *rx, unsigned int len)
738{
739 unsigned int i, n;
740 int ret;
741
742 while (len > 0) {
743 n = qspi_set_send_trigger(rspi, len);
744 qspi_set_receive_trigger(rspi, len);
745 if (n == QSPI_BUFFER_SIZE) {
746 ret = rspi_wait_for_tx_empty(rspi);
747 if (ret < 0) {
748 dev_err(&rspi->master->dev, "transmit timeout\n");
749 return ret;
750 }
751 for (i = 0; i < n; i++)
752 rspi_write_data(rspi, *tx++);
753
754 ret = rspi_wait_for_rx_full(rspi);
755 if (ret < 0) {
756 dev_err(&rspi->master->dev, "receive timeout\n");
757 return ret;
758 }
759 for (i = 0; i < n; i++)
760 *rx++ = rspi_read_data(rspi);
761 } else {
762 ret = rspi_pio_transfer(rspi, tx, rx, n);
763 if (ret < 0)
764 return ret;
765 }
766 len -= n;
767 }
768
769 return 0;
770}
771
772static int qspi_transfer_out_in(struct rspi_data *rspi,
773 struct spi_transfer *xfer)
774{
775 int ret;
776
777 qspi_receive_init(rspi);
778
779 ret = rspi_dma_check_then_transfer(rspi, xfer);
780 if (ret != -EAGAIN)
781 return ret;
782
783 return qspi_trigger_transfer_out_in(rspi, xfer->tx_buf,
784 xfer->rx_buf, xfer->len);
785}
786
787static int qspi_transfer_out(struct rspi_data *rspi, struct spi_transfer *xfer)
788{
789 const u8 *tx = xfer->tx_buf;
790 unsigned int n = xfer->len;
791 unsigned int i, len;
792 int ret;
793
794 if (rspi->master->can_dma && __rspi_can_dma(rspi, xfer)) {
795 ret = rspi_dma_transfer(rspi, &xfer->tx_sg, NULL);
796 if (ret != -EAGAIN)
797 return ret;
798 }
799
800 while (n > 0) {
801 len = qspi_set_send_trigger(rspi, n);
802 if (len == QSPI_BUFFER_SIZE) {
803 ret = rspi_wait_for_tx_empty(rspi);
804 if (ret < 0) {
805 dev_err(&rspi->master->dev, "transmit timeout\n");
806 return ret;
807 }
808 for (i = 0; i < len; i++)
809 rspi_write_data(rspi, *tx++);
810 } else {
811 ret = rspi_pio_transfer(rspi, tx, NULL, len);
812 if (ret < 0)
813 return ret;
814 }
815 n -= len;
816 }
817
818 /* Wait for the last transmission */
819 rspi_wait_for_tx_empty(rspi);
820
821 return 0;
822}
823
824static int qspi_transfer_in(struct rspi_data *rspi, struct spi_transfer *xfer)
825{
826 u8 *rx = xfer->rx_buf;
827 unsigned int n = xfer->len;
828 unsigned int i, len;
829 int ret;
830
831 if (rspi->master->can_dma && __rspi_can_dma(rspi, xfer)) {
832 int ret = rspi_dma_transfer(rspi, NULL, &xfer->rx_sg);
833 if (ret != -EAGAIN)
834 return ret;
835 }
836
837 while (n > 0) {
838 len = qspi_set_receive_trigger(rspi, n);
839 if (len == QSPI_BUFFER_SIZE) {
840 ret = rspi_wait_for_rx_full(rspi);
841 if (ret < 0) {
842 dev_err(&rspi->master->dev, "receive timeout\n");
843 return ret;
844 }
845 for (i = 0; i < len; i++)
846 *rx++ = rspi_read_data(rspi);
847 } else {
848 ret = rspi_pio_transfer(rspi, NULL, rx, len);
849 if (ret < 0)
850 return ret;
851 }
852 n -= len;
853 }
854
855 return 0;
856}
857
858static int qspi_transfer_one(struct spi_master *master, struct spi_device *spi,
859 struct spi_transfer *xfer)
860{
861 struct rspi_data *rspi = spi_master_get_devdata(master);
862
863 if (spi->mode & SPI_LOOP) {
864 return qspi_transfer_out_in(rspi, xfer);
865 } else if (xfer->tx_nbits > SPI_NBITS_SINGLE) {
866 /* Quad or Dual SPI Write */
867 return qspi_transfer_out(rspi, xfer);
868 } else if (xfer->rx_nbits > SPI_NBITS_SINGLE) {
869 /* Quad or Dual SPI Read */
870 return qspi_transfer_in(rspi, xfer);
871 } else {
872 /* Single SPI Transfer */
873 return qspi_transfer_out_in(rspi, xfer);
874 }
875}
876
877static int rspi_setup(struct spi_device *spi)
878{
879 struct rspi_data *rspi = spi_master_get_devdata(spi->master);
880
881 rspi->max_speed_hz = spi->max_speed_hz;
882
883 rspi->spcmd = SPCMD_SSLKP;
884 if (spi->mode & SPI_CPOL)
885 rspi->spcmd |= SPCMD_CPOL;
886 if (spi->mode & SPI_CPHA)
887 rspi->spcmd |= SPCMD_CPHA;
888
889 /* CMOS output mode and MOSI signal from previous transfer */
890 rspi->sppcr = 0;
891 if (spi->mode & SPI_LOOP)
892 rspi->sppcr |= SPPCR_SPLP;
893
894 set_config_register(rspi, 8);
895
896 return 0;
897}
898
899static u16 qspi_transfer_mode(const struct spi_transfer *xfer)
900{
901 if (xfer->tx_buf)
902 switch (xfer->tx_nbits) {
903 case SPI_NBITS_QUAD:
904 return SPCMD_SPIMOD_QUAD;
905 case SPI_NBITS_DUAL:
906 return SPCMD_SPIMOD_DUAL;
907 default:
908 return 0;
909 }
910 if (xfer->rx_buf)
911 switch (xfer->rx_nbits) {
912 case SPI_NBITS_QUAD:
913 return SPCMD_SPIMOD_QUAD | SPCMD_SPRW;
914 case SPI_NBITS_DUAL:
915 return SPCMD_SPIMOD_DUAL | SPCMD_SPRW;
916 default:
917 return 0;
918 }
919
920 return 0;
921}
922
923static int qspi_setup_sequencer(struct rspi_data *rspi,
924 const struct spi_message *msg)
925{
926 const struct spi_transfer *xfer;
927 unsigned int i = 0, len = 0;
928 u16 current_mode = 0xffff, mode;
929
930 list_for_each_entry(xfer, &msg->transfers, transfer_list) {
931 mode = qspi_transfer_mode(xfer);
932 if (mode == current_mode) {
933 len += xfer->len;
934 continue;
935 }
936
937 /* Transfer mode change */
938 if (i) {
939 /* Set transfer data length of previous transfer */
940 rspi_write32(rspi, len, QSPI_SPBMUL(i - 1));
941 }
942
943 if (i >= QSPI_NUM_SPCMD) {
944 dev_err(&msg->spi->dev,
945 "Too many different transfer modes");
946 return -EINVAL;
947 }
948
949 /* Program transfer mode for this transfer */
950 rspi_write16(rspi, rspi->spcmd | mode, RSPI_SPCMD(i));
951 current_mode = mode;
952 len = xfer->len;
953 i++;
954 }
955 if (i) {
956 /* Set final transfer data length and sequence length */
957 rspi_write32(rspi, len, QSPI_SPBMUL(i - 1));
958 rspi_write8(rspi, i - 1, RSPI_SPSCR);
959 }
960
961 return 0;
962}
963
964static int rspi_prepare_message(struct spi_master *master,
965 struct spi_message *msg)
966{
967 struct rspi_data *rspi = spi_master_get_devdata(master);
968 int ret;
969
970 if (msg->spi->mode &
971 (SPI_TX_DUAL | SPI_TX_QUAD | SPI_RX_DUAL | SPI_RX_QUAD)) {
972 /* Setup sequencer for messages with multiple transfer modes */
973 ret = qspi_setup_sequencer(rspi, msg);
974 if (ret < 0)
975 return ret;
976 }
977
978 /* Enable SPI function in master mode */
979 rspi_write8(rspi, rspi_read8(rspi, RSPI_SPCR) | SPCR_SPE, RSPI_SPCR);
980 return 0;
981}
982
983static int rspi_unprepare_message(struct spi_master *master,
984 struct spi_message *msg)
985{
986 struct rspi_data *rspi = spi_master_get_devdata(master);
987
988 /* Disable SPI function */
989 rspi_write8(rspi, rspi_read8(rspi, RSPI_SPCR) & ~SPCR_SPE, RSPI_SPCR);
990
991 /* Reset sequencer for Single SPI Transfers */
992 rspi_write16(rspi, rspi->spcmd, RSPI_SPCMD0);
993 rspi_write8(rspi, 0, RSPI_SPSCR);
994 return 0;
995}
996
997static irqreturn_t rspi_irq_mux(int irq, void *_sr)
998{
999 struct rspi_data *rspi = _sr;
1000 u8 spsr;
1001 irqreturn_t ret = IRQ_NONE;
1002 u8 disable_irq = 0;
1003
1004 rspi->spsr = spsr = rspi_read8(rspi, RSPI_SPSR);
1005 if (spsr & SPSR_SPRF)
1006 disable_irq |= SPCR_SPRIE;
1007 if (spsr & SPSR_SPTEF)
1008 disable_irq |= SPCR_SPTIE;
1009
1010 if (disable_irq) {
1011 ret = IRQ_HANDLED;
1012 rspi_disable_irq(rspi, disable_irq);
1013 wake_up(&rspi->wait);
1014 }
1015
1016 return ret;
1017}
1018
1019static irqreturn_t rspi_irq_rx(int irq, void *_sr)
1020{
1021 struct rspi_data *rspi = _sr;
1022 u8 spsr;
1023
1024 rspi->spsr = spsr = rspi_read8(rspi, RSPI_SPSR);
1025 if (spsr & SPSR_SPRF) {
1026 rspi_disable_irq(rspi, SPCR_SPRIE);
1027 wake_up(&rspi->wait);
1028 return IRQ_HANDLED;
1029 }
1030
1031 return 0;
1032}
1033
1034static irqreturn_t rspi_irq_tx(int irq, void *_sr)
1035{
1036 struct rspi_data *rspi = _sr;
1037 u8 spsr;
1038
1039 rspi->spsr = spsr = rspi_read8(rspi, RSPI_SPSR);
1040 if (spsr & SPSR_SPTEF) {
1041 rspi_disable_irq(rspi, SPCR_SPTIE);
1042 wake_up(&rspi->wait);
1043 return IRQ_HANDLED;
1044 }
1045
1046 return 0;
1047}
1048
1049static struct dma_chan *rspi_request_dma_chan(struct device *dev,
1050 enum dma_transfer_direction dir,
1051 unsigned int id,
1052 dma_addr_t port_addr)
1053{
1054 dma_cap_mask_t mask;
1055 struct dma_chan *chan;
1056 struct dma_slave_config cfg;
1057 int ret;
1058
1059 dma_cap_zero(mask);
1060 dma_cap_set(DMA_SLAVE, mask);
1061
1062 chan = dma_request_slave_channel_compat(mask, shdma_chan_filter,
1063 (void *)(unsigned long)id, dev,
1064 dir == DMA_MEM_TO_DEV ? "tx" : "rx");
1065 if (!chan) {
1066 dev_warn(dev, "dma_request_slave_channel_compat failed\n");
1067 return NULL;
1068 }
1069
1070 memset(&cfg, 0, sizeof(cfg));
1071 cfg.direction = dir;
1072 if (dir == DMA_MEM_TO_DEV) {
1073 cfg.dst_addr = port_addr;
1074 cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
1075 } else {
1076 cfg.src_addr = port_addr;
1077 cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
1078 }
1079
1080 ret = dmaengine_slave_config(chan, &cfg);
1081 if (ret) {
1082 dev_warn(dev, "dmaengine_slave_config failed %d\n", ret);
1083 dma_release_channel(chan);
1084 return NULL;
1085 }
1086
1087 return chan;
1088}
1089
1090static int rspi_request_dma(struct device *dev, struct spi_master *master,
1091 const struct resource *res)
1092{
1093 const struct rspi_plat_data *rspi_pd = dev_get_platdata(dev);
1094 unsigned int dma_tx_id, dma_rx_id;
1095
1096 if (dev->of_node) {
1097 /* In the OF case we will get the slave IDs from the DT */
1098 dma_tx_id = 0;
1099 dma_rx_id = 0;
1100 } else if (rspi_pd && rspi_pd->dma_tx_id && rspi_pd->dma_rx_id) {
1101 dma_tx_id = rspi_pd->dma_tx_id;
1102 dma_rx_id = rspi_pd->dma_rx_id;
1103 } else {
1104 /* The driver assumes no error. */
1105 return 0;
1106 }
1107
1108 master->dma_tx = rspi_request_dma_chan(dev, DMA_MEM_TO_DEV, dma_tx_id,
1109 res->start + RSPI_SPDR);
1110 if (!master->dma_tx)
1111 return -ENODEV;
1112
1113 master->dma_rx = rspi_request_dma_chan(dev, DMA_DEV_TO_MEM, dma_rx_id,
1114 res->start + RSPI_SPDR);
1115 if (!master->dma_rx) {
1116 dma_release_channel(master->dma_tx);
1117 master->dma_tx = NULL;
1118 return -ENODEV;
1119 }
1120
1121 master->can_dma = rspi_can_dma;
1122 dev_info(dev, "DMA available");
1123 return 0;
1124}
1125
1126static void rspi_release_dma(struct spi_master *master)
1127{
1128 if (master->dma_tx)
1129 dma_release_channel(master->dma_tx);
1130 if (master->dma_rx)
1131 dma_release_channel(master->dma_rx);
1132}
1133
1134static int rspi_remove(struct platform_device *pdev)
1135{
1136 struct rspi_data *rspi = platform_get_drvdata(pdev);
1137
1138 rspi_release_dma(rspi->master);
1139 pm_runtime_disable(&pdev->dev);
1140
1141 return 0;
1142}
1143
1144static const struct spi_ops rspi_ops = {
1145 .set_config_register = rspi_set_config_register,
1146 .transfer_one = rspi_transfer_one,
1147 .mode_bits = SPI_CPHA | SPI_CPOL | SPI_LOOP,
1148 .flags = SPI_MASTER_MUST_TX,
1149 .fifo_size = 8,
1150};
1151
1152static const struct spi_ops rspi_rz_ops = {
1153 .set_config_register = rspi_rz_set_config_register,
1154 .transfer_one = rspi_rz_transfer_one,
1155 .mode_bits = SPI_CPHA | SPI_CPOL | SPI_LOOP,
1156 .flags = SPI_MASTER_MUST_RX | SPI_MASTER_MUST_TX,
1157 .fifo_size = 8, /* 8 for TX, 32 for RX */
1158};
1159
1160static const struct spi_ops qspi_ops = {
1161 .set_config_register = qspi_set_config_register,
1162 .transfer_one = qspi_transfer_one,
1163 .mode_bits = SPI_CPHA | SPI_CPOL | SPI_LOOP |
1164 SPI_TX_DUAL | SPI_TX_QUAD |
1165 SPI_RX_DUAL | SPI_RX_QUAD,
1166 .flags = SPI_MASTER_MUST_RX | SPI_MASTER_MUST_TX,
1167 .fifo_size = 32,
1168};
1169
1170#ifdef CONFIG_OF
1171static const struct of_device_id rspi_of_match[] = {
1172 /* RSPI on legacy SH */
1173 { .compatible = "renesas,rspi", .data = &rspi_ops },
1174 /* RSPI on RZ/A1H */
1175 { .compatible = "renesas,rspi-rz", .data = &rspi_rz_ops },
1176 /* QSPI on R-Car Gen2 */
1177 { .compatible = "renesas,qspi", .data = &qspi_ops },
1178 { /* sentinel */ }
1179};
1180
1181MODULE_DEVICE_TABLE(of, rspi_of_match);
1182
1183static int rspi_parse_dt(struct device *dev, struct spi_master *master)
1184{
1185 u32 num_cs;
1186 int error;
1187
1188 /* Parse DT properties */
1189 error = of_property_read_u32(dev->of_node, "num-cs", &num_cs);
1190 if (error) {
1191 dev_err(dev, "of_property_read_u32 num-cs failed %d\n", error);
1192 return error;
1193 }
1194
1195 master->num_chipselect = num_cs;
1196 return 0;
1197}
1198#else
1199#define rspi_of_match NULL
1200static inline int rspi_parse_dt(struct device *dev, struct spi_master *master)
1201{
1202 return -EINVAL;
1203}
1204#endif /* CONFIG_OF */
1205
1206static int rspi_request_irq(struct device *dev, unsigned int irq,
1207 irq_handler_t handler, const char *suffix,
1208 void *dev_id)
1209{
1210 const char *name = devm_kasprintf(dev, GFP_KERNEL, "%s:%s",
1211 dev_name(dev), suffix);
1212 if (!name)
1213 return -ENOMEM;
1214
1215 return devm_request_irq(dev, irq, handler, 0, name, dev_id);
1216}
1217
1218static int rspi_probe(struct platform_device *pdev)
1219{
1220 struct resource *res;
1221 struct spi_master *master;
1222 struct rspi_data *rspi;
1223 int ret;
1224 const struct rspi_plat_data *rspi_pd;
1225 const struct spi_ops *ops;
1226
1227 master = spi_alloc_master(&pdev->dev, sizeof(struct rspi_data));
1228 if (master == NULL)
1229 return -ENOMEM;
1230
1231 ops = of_device_get_match_data(&pdev->dev);
1232 if (ops) {
1233 ret = rspi_parse_dt(&pdev->dev, master);
1234 if (ret)
1235 goto error1;
1236 } else {
1237 ops = (struct spi_ops *)pdev->id_entry->driver_data;
1238 rspi_pd = dev_get_platdata(&pdev->dev);
1239 if (rspi_pd && rspi_pd->num_chipselect)
1240 master->num_chipselect = rspi_pd->num_chipselect;
1241 else
1242 master->num_chipselect = 2; /* default */
1243 }
1244
1245 /* ops parameter check */
1246 if (!ops->set_config_register) {
1247 dev_err(&pdev->dev, "there is no set_config_register\n");
1248 ret = -ENODEV;
1249 goto error1;
1250 }
1251
1252 rspi = spi_master_get_devdata(master);
1253 platform_set_drvdata(pdev, rspi);
1254 rspi->ops = ops;
1255 rspi->master = master;
1256
1257 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1258 rspi->addr = devm_ioremap_resource(&pdev->dev, res);
1259 if (IS_ERR(rspi->addr)) {
1260 ret = PTR_ERR(rspi->addr);
1261 goto error1;
1262 }
1263
1264 rspi->clk = devm_clk_get(&pdev->dev, NULL);
1265 if (IS_ERR(rspi->clk)) {
1266 dev_err(&pdev->dev, "cannot get clock\n");
1267 ret = PTR_ERR(rspi->clk);
1268 goto error1;
1269 }
1270
1271 pm_runtime_enable(&pdev->dev);
1272
1273 init_waitqueue_head(&rspi->wait);
1274
1275 master->bus_num = pdev->id;
1276 master->setup = rspi_setup;
1277 master->auto_runtime_pm = true;
1278 master->transfer_one = ops->transfer_one;
1279 master->prepare_message = rspi_prepare_message;
1280 master->unprepare_message = rspi_unprepare_message;
1281 master->mode_bits = ops->mode_bits;
1282 master->flags = ops->flags;
1283 master->dev.of_node = pdev->dev.of_node;
1284
1285 ret = platform_get_irq_byname(pdev, "rx");
1286 if (ret < 0) {
1287 ret = platform_get_irq_byname(pdev, "mux");
1288 if (ret < 0)
1289 ret = platform_get_irq(pdev, 0);
1290 if (ret >= 0)
1291 rspi->rx_irq = rspi->tx_irq = ret;
1292 } else {
1293 rspi->rx_irq = ret;
1294 ret = platform_get_irq_byname(pdev, "tx");
1295 if (ret >= 0)
1296 rspi->tx_irq = ret;
1297 }
1298 if (ret < 0) {
1299 dev_err(&pdev->dev, "platform_get_irq error\n");
1300 goto error2;
1301 }
1302
1303 if (rspi->rx_irq == rspi->tx_irq) {
1304 /* Single multiplexed interrupt */
1305 ret = rspi_request_irq(&pdev->dev, rspi->rx_irq, rspi_irq_mux,
1306 "mux", rspi);
1307 } else {
1308 /* Multi-interrupt mode, only SPRI and SPTI are used */
1309 ret = rspi_request_irq(&pdev->dev, rspi->rx_irq, rspi_irq_rx,
1310 "rx", rspi);
1311 if (!ret)
1312 ret = rspi_request_irq(&pdev->dev, rspi->tx_irq,
1313 rspi_irq_tx, "tx", rspi);
1314 }
1315 if (ret < 0) {
1316 dev_err(&pdev->dev, "request_irq error\n");
1317 goto error2;
1318 }
1319
1320 ret = rspi_request_dma(&pdev->dev, master, res);
1321 if (ret < 0)
1322 dev_warn(&pdev->dev, "DMA not available, using PIO\n");
1323
1324 ret = devm_spi_register_master(&pdev->dev, master);
1325 if (ret < 0) {
1326 dev_err(&pdev->dev, "spi_register_master error.\n");
1327 goto error3;
1328 }
1329
1330 dev_info(&pdev->dev, "probed\n");
1331
1332 return 0;
1333
1334error3:
1335 rspi_release_dma(master);
1336error2:
1337 pm_runtime_disable(&pdev->dev);
1338error1:
1339 spi_master_put(master);
1340
1341 return ret;
1342}
1343
1344static const struct platform_device_id spi_driver_ids[] = {
1345 { "rspi", (kernel_ulong_t)&rspi_ops },
1346 { "rspi-rz", (kernel_ulong_t)&rspi_rz_ops },
1347 { "qspi", (kernel_ulong_t)&qspi_ops },
1348 {},
1349};
1350
1351MODULE_DEVICE_TABLE(platform, spi_driver_ids);
1352
1353static struct platform_driver rspi_driver = {
1354 .probe = rspi_probe,
1355 .remove = rspi_remove,
1356 .id_table = spi_driver_ids,
1357 .driver = {
1358 .name = "renesas_spi",
1359 .of_match_table = of_match_ptr(rspi_of_match),
1360 },
1361};
1362module_platform_driver(rspi_driver);
1363
1364MODULE_DESCRIPTION("Renesas RSPI bus driver");
1365MODULE_LICENSE("GPL v2");
1366MODULE_AUTHOR("Yoshihiro Shimoda");
1367MODULE_ALIAS("platform:rspi");