Loading...
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 *
4 * Copyright (C) 2012 Thomas Langer <thomas.langer@lantiq.com>
5 */
6
7#include <linux/module.h>
8#include <linux/device.h>
9#include <linux/platform_device.h>
10#include <linux/spi/spi.h>
11#include <linux/delay.h>
12#include <linux/of.h>
13#include <linux/of_platform.h>
14
15#include <lantiq_soc.h>
16
17#define DRV_NAME "sflash-falcon"
18
19#define FALCON_SPI_XFER_BEGIN (1 << 0)
20#define FALCON_SPI_XFER_END (1 << 1)
21
22/* Bus Read Configuration Register0 */
23#define BUSRCON0 0x00000010
24/* Bus Write Configuration Register0 */
25#define BUSWCON0 0x00000018
26/* Serial Flash Configuration Register */
27#define SFCON 0x00000080
28/* Serial Flash Time Register */
29#define SFTIME 0x00000084
30/* Serial Flash Status Register */
31#define SFSTAT 0x00000088
32/* Serial Flash Command Register */
33#define SFCMD 0x0000008C
34/* Serial Flash Address Register */
35#define SFADDR 0x00000090
36/* Serial Flash Data Register */
37#define SFDATA 0x00000094
38/* Serial Flash I/O Control Register */
39#define SFIO 0x00000098
40/* EBU Clock Control Register */
41#define EBUCC 0x000000C4
42
43/* Dummy Phase Length */
44#define SFCMD_DUMLEN_OFFSET 16
45#define SFCMD_DUMLEN_MASK 0x000F0000
46/* Chip Select */
47#define SFCMD_CS_OFFSET 24
48#define SFCMD_CS_MASK 0x07000000
49/* field offset */
50#define SFCMD_ALEN_OFFSET 20
51#define SFCMD_ALEN_MASK 0x00700000
52/* SCK Rise-edge Position */
53#define SFTIME_SCKR_POS_OFFSET 8
54#define SFTIME_SCKR_POS_MASK 0x00000F00
55/* SCK Period */
56#define SFTIME_SCK_PER_OFFSET 0
57#define SFTIME_SCK_PER_MASK 0x0000000F
58/* SCK Fall-edge Position */
59#define SFTIME_SCKF_POS_OFFSET 12
60#define SFTIME_SCKF_POS_MASK 0x0000F000
61/* Device Size */
62#define SFCON_DEV_SIZE_A23_0 0x03000000
63#define SFCON_DEV_SIZE_MASK 0x0F000000
64/* Read Data Position */
65#define SFTIME_RD_POS_MASK 0x000F0000
66/* Data Output */
67#define SFIO_UNUSED_WD_MASK 0x0000000F
68/* Command Opcode mask */
69#define SFCMD_OPC_MASK 0x000000FF
70/* dlen bytes of data to write */
71#define SFCMD_DIR_WRITE 0x00000100
72/* Data Length offset */
73#define SFCMD_DLEN_OFFSET 9
74/* Command Error */
75#define SFSTAT_CMD_ERR 0x20000000
76/* Access Command Pending */
77#define SFSTAT_CMD_PEND 0x00400000
78/* Frequency set to 100MHz. */
79#define EBUCC_EBUDIV_SELF100 0x00000001
80/* Serial Flash */
81#define BUSRCON0_AGEN_SERIAL_FLASH 0xF0000000
82/* 8-bit multiplexed */
83#define BUSRCON0_PORTW_8_BIT_MUX 0x00000000
84/* Serial Flash */
85#define BUSWCON0_AGEN_SERIAL_FLASH 0xF0000000
86/* Chip Select after opcode */
87#define SFCMD_KEEP_CS_KEEP_SELECTED 0x00008000
88
89#define CLOCK_100M 100000000
90#define CLOCK_50M 50000000
91
92struct falcon_sflash {
93 u32 sfcmd; /* for caching of opcode, direction, ... */
94 struct spi_controller *host;
95};
96
97int falcon_sflash_xfer(struct spi_device *spi, struct spi_transfer *t,
98 unsigned long flags)
99{
100 struct device *dev = &spi->dev;
101 struct falcon_sflash *priv = spi_controller_get_devdata(spi->controller);
102 const u8 *txp = t->tx_buf;
103 u8 *rxp = t->rx_buf;
104 unsigned int bytelen = ((8 * t->len + 7) / 8);
105 unsigned int len, alen, dumlen;
106 u32 val;
107 enum {
108 state_init,
109 state_command_prepare,
110 state_write,
111 state_read,
112 state_disable_cs,
113 state_end
114 } state = state_init;
115
116 do {
117 switch (state) {
118 case state_init: /* detect phase of upper layer sequence */
119 {
120 /* initial write ? */
121 if (flags & FALCON_SPI_XFER_BEGIN) {
122 if (!txp) {
123 dev_err(dev,
124 "BEGIN without tx data!\n");
125 return -ENODATA;
126 }
127 /*
128 * Prepare the parts of the sfcmd register,
129 * which should not change during a sequence!
130 * Only exception are the length fields,
131 * especially alen and dumlen.
132 */
133
134 priv->sfcmd = ((spi_get_chipselect(spi, 0)
135 << SFCMD_CS_OFFSET)
136 & SFCMD_CS_MASK);
137 priv->sfcmd |= SFCMD_KEEP_CS_KEEP_SELECTED;
138 priv->sfcmd |= *txp;
139 txp++;
140 bytelen--;
141 if (bytelen) {
142 /*
143 * more data:
144 * maybe address and/or dummy
145 */
146 state = state_command_prepare;
147 break;
148 } else {
149 dev_dbg(dev, "write cmd %02X\n",
150 priv->sfcmd & SFCMD_OPC_MASK);
151 }
152 }
153 /* continued write ? */
154 if (txp && bytelen) {
155 state = state_write;
156 break;
157 }
158 /* read data? */
159 if (rxp && bytelen) {
160 state = state_read;
161 break;
162 }
163 /* end of sequence? */
164 if (flags & FALCON_SPI_XFER_END)
165 state = state_disable_cs;
166 else
167 state = state_end;
168 break;
169 }
170 /* collect tx data for address and dummy phase */
171 case state_command_prepare:
172 {
173 /* txp is valid, already checked */
174 val = 0;
175 alen = 0;
176 dumlen = 0;
177 while (bytelen > 0) {
178 if (alen < 3) {
179 val = (val << 8) | (*txp++);
180 alen++;
181 } else if ((dumlen < 15) && (*txp == 0)) {
182 /*
183 * assume dummy bytes are set to 0
184 * from upper layer
185 */
186 dumlen++;
187 txp++;
188 } else {
189 break;
190 }
191 bytelen--;
192 }
193 priv->sfcmd &= ~(SFCMD_ALEN_MASK | SFCMD_DUMLEN_MASK);
194 priv->sfcmd |= (alen << SFCMD_ALEN_OFFSET) |
195 (dumlen << SFCMD_DUMLEN_OFFSET);
196 if (alen > 0)
197 ltq_ebu_w32(val, SFADDR);
198
199 dev_dbg(dev, "wr %02X, alen=%d (addr=%06X) dlen=%d\n",
200 priv->sfcmd & SFCMD_OPC_MASK,
201 alen, val, dumlen);
202
203 if (bytelen > 0) {
204 /* continue with write */
205 state = state_write;
206 } else if (flags & FALCON_SPI_XFER_END) {
207 /* end of sequence? */
208 state = state_disable_cs;
209 } else {
210 /*
211 * go to end and expect another
212 * call (read or write)
213 */
214 state = state_end;
215 }
216 break;
217 }
218 case state_write:
219 {
220 /* txp still valid */
221 priv->sfcmd |= SFCMD_DIR_WRITE;
222 len = 0;
223 val = 0;
224 do {
225 if (bytelen--)
226 val |= (*txp++) << (8 * len++);
227 if ((flags & FALCON_SPI_XFER_END)
228 && (bytelen == 0)) {
229 priv->sfcmd &=
230 ~SFCMD_KEEP_CS_KEEP_SELECTED;
231 }
232 if ((len == 4) || (bytelen == 0)) {
233 ltq_ebu_w32(val, SFDATA);
234 ltq_ebu_w32(priv->sfcmd
235 | (len<<SFCMD_DLEN_OFFSET),
236 SFCMD);
237 len = 0;
238 val = 0;
239 priv->sfcmd &= ~(SFCMD_ALEN_MASK
240 | SFCMD_DUMLEN_MASK);
241 }
242 } while (bytelen);
243 state = state_end;
244 break;
245 }
246 case state_read:
247 {
248 /* read data */
249 priv->sfcmd &= ~SFCMD_DIR_WRITE;
250 do {
251 if ((flags & FALCON_SPI_XFER_END)
252 && (bytelen <= 4)) {
253 priv->sfcmd &=
254 ~SFCMD_KEEP_CS_KEEP_SELECTED;
255 }
256 len = (bytelen > 4) ? 4 : bytelen;
257 bytelen -= len;
258 ltq_ebu_w32(priv->sfcmd
259 | (len << SFCMD_DLEN_OFFSET), SFCMD);
260 priv->sfcmd &= ~(SFCMD_ALEN_MASK
261 | SFCMD_DUMLEN_MASK);
262 do {
263 val = ltq_ebu_r32(SFSTAT);
264 if (val & SFSTAT_CMD_ERR) {
265 /* reset error status */
266 dev_err(dev, "SFSTAT: CMD_ERR");
267 dev_err(dev, " (%x)\n", val);
268 ltq_ebu_w32(SFSTAT_CMD_ERR,
269 SFSTAT);
270 return -EBADE;
271 }
272 } while (val & SFSTAT_CMD_PEND);
273 val = ltq_ebu_r32(SFDATA);
274 do {
275 *rxp = (val & 0xFF);
276 rxp++;
277 val >>= 8;
278 len--;
279 } while (len);
280 } while (bytelen);
281 state = state_end;
282 break;
283 }
284 case state_disable_cs:
285 {
286 priv->sfcmd &= ~SFCMD_KEEP_CS_KEEP_SELECTED;
287 ltq_ebu_w32(priv->sfcmd | (0 << SFCMD_DLEN_OFFSET),
288 SFCMD);
289 val = ltq_ebu_r32(SFSTAT);
290 if (val & SFSTAT_CMD_ERR) {
291 /* reset error status */
292 dev_err(dev, "SFSTAT: CMD_ERR (%x)\n", val);
293 ltq_ebu_w32(SFSTAT_CMD_ERR, SFSTAT);
294 return -EBADE;
295 }
296 state = state_end;
297 break;
298 }
299 case state_end:
300 break;
301 }
302 } while (state != state_end);
303
304 return 0;
305}
306
307static int falcon_sflash_setup(struct spi_device *spi)
308{
309 unsigned int i;
310 unsigned long flags;
311
312 spin_lock_irqsave(&ebu_lock, flags);
313
314 if (spi->max_speed_hz >= CLOCK_100M) {
315 /* set EBU clock to 100 MHz */
316 ltq_sys1_w32_mask(0, EBUCC_EBUDIV_SELF100, EBUCC);
317 i = 1; /* divider */
318 } else {
319 /* set EBU clock to 50 MHz */
320 ltq_sys1_w32_mask(EBUCC_EBUDIV_SELF100, 0, EBUCC);
321
322 /* search for suitable divider */
323 for (i = 1; i < 7; i++) {
324 if (CLOCK_50M / i <= spi->max_speed_hz)
325 break;
326 }
327 }
328
329 /* setup period of serial clock */
330 ltq_ebu_w32_mask(SFTIME_SCKF_POS_MASK
331 | SFTIME_SCKR_POS_MASK
332 | SFTIME_SCK_PER_MASK,
333 (i << SFTIME_SCKR_POS_OFFSET)
334 | (i << (SFTIME_SCK_PER_OFFSET + 1)),
335 SFTIME);
336
337 /*
338 * set some bits of unused_wd, to not trigger HOLD/WP
339 * signals on non QUAD flashes
340 */
341 ltq_ebu_w32((SFIO_UNUSED_WD_MASK & (0x8 | 0x4)), SFIO);
342
343 ltq_ebu_w32(BUSRCON0_AGEN_SERIAL_FLASH | BUSRCON0_PORTW_8_BIT_MUX,
344 BUSRCON0);
345 ltq_ebu_w32(BUSWCON0_AGEN_SERIAL_FLASH, BUSWCON0);
346 /* set address wrap around to maximum for 24-bit addresses */
347 ltq_ebu_w32_mask(SFCON_DEV_SIZE_MASK, SFCON_DEV_SIZE_A23_0, SFCON);
348
349 spin_unlock_irqrestore(&ebu_lock, flags);
350
351 return 0;
352}
353
354static int falcon_sflash_xfer_one(struct spi_controller *host,
355 struct spi_message *m)
356{
357 struct falcon_sflash *priv = spi_controller_get_devdata(host);
358 struct spi_transfer *t;
359 unsigned long spi_flags;
360 unsigned long flags;
361 int ret = 0;
362
363 priv->sfcmd = 0;
364 m->actual_length = 0;
365
366 spi_flags = FALCON_SPI_XFER_BEGIN;
367 list_for_each_entry(t, &m->transfers, transfer_list) {
368 if (list_is_last(&t->transfer_list, &m->transfers))
369 spi_flags |= FALCON_SPI_XFER_END;
370
371 spin_lock_irqsave(&ebu_lock, flags);
372 ret = falcon_sflash_xfer(m->spi, t, spi_flags);
373 spin_unlock_irqrestore(&ebu_lock, flags);
374
375 if (ret)
376 break;
377
378 m->actual_length += t->len;
379
380 WARN_ON(t->delay.value || t->cs_change);
381 spi_flags = 0;
382 }
383
384 m->status = ret;
385 spi_finalize_current_message(host);
386
387 return 0;
388}
389
390static int falcon_sflash_probe(struct platform_device *pdev)
391{
392 struct falcon_sflash *priv;
393 struct spi_controller *host;
394 int ret;
395
396 host = spi_alloc_host(&pdev->dev, sizeof(*priv));
397 if (!host)
398 return -ENOMEM;
399
400 priv = spi_controller_get_devdata(host);
401 priv->host = host;
402
403 host->mode_bits = SPI_MODE_3;
404 host->flags = SPI_CONTROLLER_HALF_DUPLEX;
405 host->setup = falcon_sflash_setup;
406 host->transfer_one_message = falcon_sflash_xfer_one;
407 host->dev.of_node = pdev->dev.of_node;
408
409 ret = devm_spi_register_controller(&pdev->dev, host);
410 if (ret)
411 spi_controller_put(host);
412 return ret;
413}
414
415static const struct of_device_id falcon_sflash_match[] = {
416 { .compatible = "lantiq,sflash-falcon" },
417 {},
418};
419MODULE_DEVICE_TABLE(of, falcon_sflash_match);
420
421static struct platform_driver falcon_sflash_driver = {
422 .probe = falcon_sflash_probe,
423 .driver = {
424 .name = DRV_NAME,
425 .of_match_table = falcon_sflash_match,
426 }
427};
428
429module_platform_driver(falcon_sflash_driver);
430
431MODULE_LICENSE("GPL");
432MODULE_DESCRIPTION("Lantiq Falcon SPI/SFLASH controller driver");
1/*
2 * This program is free software; you can redistribute it and/or modify it
3 * under the terms of the GNU General Public License version 2 as published
4 * by the Free Software Foundation.
5 *
6 * Copyright (C) 2012 Thomas Langer <thomas.langer@lantiq.com>
7 */
8
9#include <linux/module.h>
10#include <linux/device.h>
11#include <linux/platform_device.h>
12#include <linux/spi/spi.h>
13#include <linux/delay.h>
14#include <linux/of.h>
15#include <linux/of_platform.h>
16
17#include <lantiq_soc.h>
18
19#define DRV_NAME "sflash-falcon"
20
21#define FALCON_SPI_XFER_BEGIN (1 << 0)
22#define FALCON_SPI_XFER_END (1 << 1)
23
24/* Bus Read Configuration Register0 */
25#define BUSRCON0 0x00000010
26/* Bus Write Configuration Register0 */
27#define BUSWCON0 0x00000018
28/* Serial Flash Configuration Register */
29#define SFCON 0x00000080
30/* Serial Flash Time Register */
31#define SFTIME 0x00000084
32/* Serial Flash Status Register */
33#define SFSTAT 0x00000088
34/* Serial Flash Command Register */
35#define SFCMD 0x0000008C
36/* Serial Flash Address Register */
37#define SFADDR 0x00000090
38/* Serial Flash Data Register */
39#define SFDATA 0x00000094
40/* Serial Flash I/O Control Register */
41#define SFIO 0x00000098
42/* EBU Clock Control Register */
43#define EBUCC 0x000000C4
44
45/* Dummy Phase Length */
46#define SFCMD_DUMLEN_OFFSET 16
47#define SFCMD_DUMLEN_MASK 0x000F0000
48/* Chip Select */
49#define SFCMD_CS_OFFSET 24
50#define SFCMD_CS_MASK 0x07000000
51/* field offset */
52#define SFCMD_ALEN_OFFSET 20
53#define SFCMD_ALEN_MASK 0x00700000
54/* SCK Rise-edge Position */
55#define SFTIME_SCKR_POS_OFFSET 8
56#define SFTIME_SCKR_POS_MASK 0x00000F00
57/* SCK Period */
58#define SFTIME_SCK_PER_OFFSET 0
59#define SFTIME_SCK_PER_MASK 0x0000000F
60/* SCK Fall-edge Position */
61#define SFTIME_SCKF_POS_OFFSET 12
62#define SFTIME_SCKF_POS_MASK 0x0000F000
63/* Device Size */
64#define SFCON_DEV_SIZE_A23_0 0x03000000
65#define SFCON_DEV_SIZE_MASK 0x0F000000
66/* Read Data Position */
67#define SFTIME_RD_POS_MASK 0x000F0000
68/* Data Output */
69#define SFIO_UNUSED_WD_MASK 0x0000000F
70/* Command Opcode mask */
71#define SFCMD_OPC_MASK 0x000000FF
72/* dlen bytes of data to write */
73#define SFCMD_DIR_WRITE 0x00000100
74/* Data Length offset */
75#define SFCMD_DLEN_OFFSET 9
76/* Command Error */
77#define SFSTAT_CMD_ERR 0x20000000
78/* Access Command Pending */
79#define SFSTAT_CMD_PEND 0x00400000
80/* Frequency set to 100MHz. */
81#define EBUCC_EBUDIV_SELF100 0x00000001
82/* Serial Flash */
83#define BUSRCON0_AGEN_SERIAL_FLASH 0xF0000000
84/* 8-bit multiplexed */
85#define BUSRCON0_PORTW_8_BIT_MUX 0x00000000
86/* Serial Flash */
87#define BUSWCON0_AGEN_SERIAL_FLASH 0xF0000000
88/* Chip Select after opcode */
89#define SFCMD_KEEP_CS_KEEP_SELECTED 0x00008000
90
91#define CLOCK_100M 100000000
92#define CLOCK_50M 50000000
93
94struct falcon_sflash {
95 u32 sfcmd; /* for caching of opcode, direction, ... */
96 struct spi_master *master;
97};
98
99int falcon_sflash_xfer(struct spi_device *spi, struct spi_transfer *t,
100 unsigned long flags)
101{
102 struct device *dev = &spi->dev;
103 struct falcon_sflash *priv = spi_master_get_devdata(spi->master);
104 const u8 *txp = t->tx_buf;
105 u8 *rxp = t->rx_buf;
106 unsigned int bytelen = ((8 * t->len + 7) / 8);
107 unsigned int len, alen, dumlen;
108 u32 val;
109 enum {
110 state_init,
111 state_command_prepare,
112 state_write,
113 state_read,
114 state_disable_cs,
115 state_end
116 } state = state_init;
117
118 do {
119 switch (state) {
120 case state_init: /* detect phase of upper layer sequence */
121 {
122 /* initial write ? */
123 if (flags & FALCON_SPI_XFER_BEGIN) {
124 if (!txp) {
125 dev_err(dev,
126 "BEGIN without tx data!\n");
127 return -ENODATA;
128 }
129 /*
130 * Prepare the parts of the sfcmd register,
131 * which should not change during a sequence!
132 * Only exception are the length fields,
133 * especially alen and dumlen.
134 */
135
136 priv->sfcmd = ((spi->chip_select
137 << SFCMD_CS_OFFSET)
138 & SFCMD_CS_MASK);
139 priv->sfcmd |= SFCMD_KEEP_CS_KEEP_SELECTED;
140 priv->sfcmd |= *txp;
141 txp++;
142 bytelen--;
143 if (bytelen) {
144 /*
145 * more data:
146 * maybe address and/or dummy
147 */
148 state = state_command_prepare;
149 break;
150 } else {
151 dev_dbg(dev, "write cmd %02X\n",
152 priv->sfcmd & SFCMD_OPC_MASK);
153 }
154 }
155 /* continued write ? */
156 if (txp && bytelen) {
157 state = state_write;
158 break;
159 }
160 /* read data? */
161 if (rxp && bytelen) {
162 state = state_read;
163 break;
164 }
165 /* end of sequence? */
166 if (flags & FALCON_SPI_XFER_END)
167 state = state_disable_cs;
168 else
169 state = state_end;
170 break;
171 }
172 /* collect tx data for address and dummy phase */
173 case state_command_prepare:
174 {
175 /* txp is valid, already checked */
176 val = 0;
177 alen = 0;
178 dumlen = 0;
179 while (bytelen > 0) {
180 if (alen < 3) {
181 val = (val << 8) | (*txp++);
182 alen++;
183 } else if ((dumlen < 15) && (*txp == 0)) {
184 /*
185 * assume dummy bytes are set to 0
186 * from upper layer
187 */
188 dumlen++;
189 txp++;
190 } else {
191 break;
192 }
193 bytelen--;
194 }
195 priv->sfcmd &= ~(SFCMD_ALEN_MASK | SFCMD_DUMLEN_MASK);
196 priv->sfcmd |= (alen << SFCMD_ALEN_OFFSET) |
197 (dumlen << SFCMD_DUMLEN_OFFSET);
198 if (alen > 0)
199 ltq_ebu_w32(val, SFADDR);
200
201 dev_dbg(dev, "wr %02X, alen=%d (addr=%06X) dlen=%d\n",
202 priv->sfcmd & SFCMD_OPC_MASK,
203 alen, val, dumlen);
204
205 if (bytelen > 0) {
206 /* continue with write */
207 state = state_write;
208 } else if (flags & FALCON_SPI_XFER_END) {
209 /* end of sequence? */
210 state = state_disable_cs;
211 } else {
212 /*
213 * go to end and expect another
214 * call (read or write)
215 */
216 state = state_end;
217 }
218 break;
219 }
220 case state_write:
221 {
222 /* txp still valid */
223 priv->sfcmd |= SFCMD_DIR_WRITE;
224 len = 0;
225 val = 0;
226 do {
227 if (bytelen--)
228 val |= (*txp++) << (8 * len++);
229 if ((flags & FALCON_SPI_XFER_END)
230 && (bytelen == 0)) {
231 priv->sfcmd &=
232 ~SFCMD_KEEP_CS_KEEP_SELECTED;
233 }
234 if ((len == 4) || (bytelen == 0)) {
235 ltq_ebu_w32(val, SFDATA);
236 ltq_ebu_w32(priv->sfcmd
237 | (len<<SFCMD_DLEN_OFFSET),
238 SFCMD);
239 len = 0;
240 val = 0;
241 priv->sfcmd &= ~(SFCMD_ALEN_MASK
242 | SFCMD_DUMLEN_MASK);
243 }
244 } while (bytelen);
245 state = state_end;
246 break;
247 }
248 case state_read:
249 {
250 /* read data */
251 priv->sfcmd &= ~SFCMD_DIR_WRITE;
252 do {
253 if ((flags & FALCON_SPI_XFER_END)
254 && (bytelen <= 4)) {
255 priv->sfcmd &=
256 ~SFCMD_KEEP_CS_KEEP_SELECTED;
257 }
258 len = (bytelen > 4) ? 4 : bytelen;
259 bytelen -= len;
260 ltq_ebu_w32(priv->sfcmd
261 | (len << SFCMD_DLEN_OFFSET), SFCMD);
262 priv->sfcmd &= ~(SFCMD_ALEN_MASK
263 | SFCMD_DUMLEN_MASK);
264 do {
265 val = ltq_ebu_r32(SFSTAT);
266 if (val & SFSTAT_CMD_ERR) {
267 /* reset error status */
268 dev_err(dev, "SFSTAT: CMD_ERR");
269 dev_err(dev, " (%x)\n", val);
270 ltq_ebu_w32(SFSTAT_CMD_ERR,
271 SFSTAT);
272 return -EBADE;
273 }
274 } while (val & SFSTAT_CMD_PEND);
275 val = ltq_ebu_r32(SFDATA);
276 do {
277 *rxp = (val & 0xFF);
278 rxp++;
279 val >>= 8;
280 len--;
281 } while (len);
282 } while (bytelen);
283 state = state_end;
284 break;
285 }
286 case state_disable_cs:
287 {
288 priv->sfcmd &= ~SFCMD_KEEP_CS_KEEP_SELECTED;
289 ltq_ebu_w32(priv->sfcmd | (0 << SFCMD_DLEN_OFFSET),
290 SFCMD);
291 val = ltq_ebu_r32(SFSTAT);
292 if (val & SFSTAT_CMD_ERR) {
293 /* reset error status */
294 dev_err(dev, "SFSTAT: CMD_ERR (%x)\n", val);
295 ltq_ebu_w32(SFSTAT_CMD_ERR, SFSTAT);
296 return -EBADE;
297 }
298 state = state_end;
299 break;
300 }
301 case state_end:
302 break;
303 }
304 } while (state != state_end);
305
306 return 0;
307}
308
309static int falcon_sflash_setup(struct spi_device *spi)
310{
311 unsigned int i;
312 unsigned long flags;
313
314 spin_lock_irqsave(&ebu_lock, flags);
315
316 if (spi->max_speed_hz >= CLOCK_100M) {
317 /* set EBU clock to 100 MHz */
318 ltq_sys1_w32_mask(0, EBUCC_EBUDIV_SELF100, EBUCC);
319 i = 1; /* divider */
320 } else {
321 /* set EBU clock to 50 MHz */
322 ltq_sys1_w32_mask(EBUCC_EBUDIV_SELF100, 0, EBUCC);
323
324 /* search for suitable divider */
325 for (i = 1; i < 7; i++) {
326 if (CLOCK_50M / i <= spi->max_speed_hz)
327 break;
328 }
329 }
330
331 /* setup period of serial clock */
332 ltq_ebu_w32_mask(SFTIME_SCKF_POS_MASK
333 | SFTIME_SCKR_POS_MASK
334 | SFTIME_SCK_PER_MASK,
335 (i << SFTIME_SCKR_POS_OFFSET)
336 | (i << (SFTIME_SCK_PER_OFFSET + 1)),
337 SFTIME);
338
339 /*
340 * set some bits of unused_wd, to not trigger HOLD/WP
341 * signals on non QUAD flashes
342 */
343 ltq_ebu_w32((SFIO_UNUSED_WD_MASK & (0x8 | 0x4)), SFIO);
344
345 ltq_ebu_w32(BUSRCON0_AGEN_SERIAL_FLASH | BUSRCON0_PORTW_8_BIT_MUX,
346 BUSRCON0);
347 ltq_ebu_w32(BUSWCON0_AGEN_SERIAL_FLASH, BUSWCON0);
348 /* set address wrap around to maximum for 24-bit addresses */
349 ltq_ebu_w32_mask(SFCON_DEV_SIZE_MASK, SFCON_DEV_SIZE_A23_0, SFCON);
350
351 spin_unlock_irqrestore(&ebu_lock, flags);
352
353 return 0;
354}
355
356static int falcon_sflash_xfer_one(struct spi_master *master,
357 struct spi_message *m)
358{
359 struct falcon_sflash *priv = spi_master_get_devdata(master);
360 struct spi_transfer *t;
361 unsigned long spi_flags;
362 unsigned long flags;
363 int ret = 0;
364
365 priv->sfcmd = 0;
366 m->actual_length = 0;
367
368 spi_flags = FALCON_SPI_XFER_BEGIN;
369 list_for_each_entry(t, &m->transfers, transfer_list) {
370 if (list_is_last(&t->transfer_list, &m->transfers))
371 spi_flags |= FALCON_SPI_XFER_END;
372
373 spin_lock_irqsave(&ebu_lock, flags);
374 ret = falcon_sflash_xfer(m->spi, t, spi_flags);
375 spin_unlock_irqrestore(&ebu_lock, flags);
376
377 if (ret)
378 break;
379
380 m->actual_length += t->len;
381
382 WARN_ON(t->delay_usecs || t->cs_change);
383 spi_flags = 0;
384 }
385
386 m->status = ret;
387 spi_finalize_current_message(master);
388
389 return 0;
390}
391
392static int falcon_sflash_probe(struct platform_device *pdev)
393{
394 struct falcon_sflash *priv;
395 struct spi_master *master;
396 int ret;
397
398 master = spi_alloc_master(&pdev->dev, sizeof(*priv));
399 if (!master)
400 return -ENOMEM;
401
402 priv = spi_master_get_devdata(master);
403 priv->master = master;
404
405 master->mode_bits = SPI_MODE_3;
406 master->flags = SPI_MASTER_HALF_DUPLEX;
407 master->setup = falcon_sflash_setup;
408 master->transfer_one_message = falcon_sflash_xfer_one;
409 master->dev.of_node = pdev->dev.of_node;
410
411 ret = devm_spi_register_master(&pdev->dev, master);
412 if (ret)
413 spi_master_put(master);
414 return ret;
415}
416
417static const struct of_device_id falcon_sflash_match[] = {
418 { .compatible = "lantiq,sflash-falcon" },
419 {},
420};
421MODULE_DEVICE_TABLE(of, falcon_sflash_match);
422
423static struct platform_driver falcon_sflash_driver = {
424 .probe = falcon_sflash_probe,
425 .driver = {
426 .name = DRV_NAME,
427 .of_match_table = falcon_sflash_match,
428 }
429};
430
431module_platform_driver(falcon_sflash_driver);
432
433MODULE_LICENSE("GPL");
434MODULE_DESCRIPTION("Lantiq Falcon SPI/SFLASH controller driver");