Loading...
1// SPDX-License-Identifier: GPL-2.0
2/* Copyright(c) 1999 - 2018 Intel Corporation. */
3
4#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
5
6#include <linux/module.h>
7#include <linux/types.h>
8#include <linux/init.h>
9#include <linux/pci.h>
10#include <linux/vmalloc.h>
11#include <linux/pagemap.h>
12#include <linux/delay.h>
13#include <linux/netdevice.h>
14#include <linux/interrupt.h>
15#include <linux/tcp.h>
16#include <linux/ipv6.h>
17#include <linux/slab.h>
18#include <net/checksum.h>
19#include <net/ip6_checksum.h>
20#include <linux/ethtool.h>
21#include <linux/if_vlan.h>
22#include <linux/cpu.h>
23#include <linux/smp.h>
24#include <linux/pm_qos.h>
25#include <linux/pm_runtime.h>
26#include <linux/prefetch.h>
27#include <linux/suspend.h>
28
29#include "e1000.h"
30#define CREATE_TRACE_POINTS
31#include "e1000e_trace.h"
32
33char e1000e_driver_name[] = "e1000e";
34
35#define DEFAULT_MSG_ENABLE (NETIF_MSG_DRV|NETIF_MSG_PROBE|NETIF_MSG_LINK)
36static int debug = -1;
37module_param(debug, int, 0);
38MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
39
40static const struct e1000_info *e1000_info_tbl[] = {
41 [board_82571] = &e1000_82571_info,
42 [board_82572] = &e1000_82572_info,
43 [board_82573] = &e1000_82573_info,
44 [board_82574] = &e1000_82574_info,
45 [board_82583] = &e1000_82583_info,
46 [board_80003es2lan] = &e1000_es2_info,
47 [board_ich8lan] = &e1000_ich8_info,
48 [board_ich9lan] = &e1000_ich9_info,
49 [board_ich10lan] = &e1000_ich10_info,
50 [board_pchlan] = &e1000_pch_info,
51 [board_pch2lan] = &e1000_pch2_info,
52 [board_pch_lpt] = &e1000_pch_lpt_info,
53 [board_pch_spt] = &e1000_pch_spt_info,
54 [board_pch_cnp] = &e1000_pch_cnp_info,
55 [board_pch_tgp] = &e1000_pch_tgp_info,
56 [board_pch_adp] = &e1000_pch_adp_info,
57 [board_pch_mtp] = &e1000_pch_mtp_info,
58};
59
60struct e1000_reg_info {
61 u32 ofs;
62 char *name;
63};
64
65static const struct e1000_reg_info e1000_reg_info_tbl[] = {
66 /* General Registers */
67 {E1000_CTRL, "CTRL"},
68 {E1000_STATUS, "STATUS"},
69 {E1000_CTRL_EXT, "CTRL_EXT"},
70
71 /* Interrupt Registers */
72 {E1000_ICR, "ICR"},
73
74 /* Rx Registers */
75 {E1000_RCTL, "RCTL"},
76 {E1000_RDLEN(0), "RDLEN"},
77 {E1000_RDH(0), "RDH"},
78 {E1000_RDT(0), "RDT"},
79 {E1000_RDTR, "RDTR"},
80 {E1000_RXDCTL(0), "RXDCTL"},
81 {E1000_ERT, "ERT"},
82 {E1000_RDBAL(0), "RDBAL"},
83 {E1000_RDBAH(0), "RDBAH"},
84 {E1000_RDFH, "RDFH"},
85 {E1000_RDFT, "RDFT"},
86 {E1000_RDFHS, "RDFHS"},
87 {E1000_RDFTS, "RDFTS"},
88 {E1000_RDFPC, "RDFPC"},
89
90 /* Tx Registers */
91 {E1000_TCTL, "TCTL"},
92 {E1000_TDBAL(0), "TDBAL"},
93 {E1000_TDBAH(0), "TDBAH"},
94 {E1000_TDLEN(0), "TDLEN"},
95 {E1000_TDH(0), "TDH"},
96 {E1000_TDT(0), "TDT"},
97 {E1000_TIDV, "TIDV"},
98 {E1000_TXDCTL(0), "TXDCTL"},
99 {E1000_TADV, "TADV"},
100 {E1000_TARC(0), "TARC"},
101 {E1000_TDFH, "TDFH"},
102 {E1000_TDFT, "TDFT"},
103 {E1000_TDFHS, "TDFHS"},
104 {E1000_TDFTS, "TDFTS"},
105 {E1000_TDFPC, "TDFPC"},
106
107 /* List Terminator */
108 {0, NULL}
109};
110
111/**
112 * __ew32_prepare - prepare to write to MAC CSR register on certain parts
113 * @hw: pointer to the HW structure
114 *
115 * When updating the MAC CSR registers, the Manageability Engine (ME) could
116 * be accessing the registers at the same time. Normally, this is handled in
117 * h/w by an arbiter but on some parts there is a bug that acknowledges Host
118 * accesses later than it should which could result in the register to have
119 * an incorrect value. Workaround this by checking the FWSM register which
120 * has bit 24 set while ME is accessing MAC CSR registers, wait if it is set
121 * and try again a number of times.
122 **/
123static void __ew32_prepare(struct e1000_hw *hw)
124{
125 s32 i = E1000_ICH_FWSM_PCIM2PCI_COUNT;
126
127 while ((er32(FWSM) & E1000_ICH_FWSM_PCIM2PCI) && --i)
128 udelay(50);
129}
130
131void __ew32(struct e1000_hw *hw, unsigned long reg, u32 val)
132{
133 if (hw->adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA)
134 __ew32_prepare(hw);
135
136 writel(val, hw->hw_addr + reg);
137}
138
139/**
140 * e1000_regdump - register printout routine
141 * @hw: pointer to the HW structure
142 * @reginfo: pointer to the register info table
143 **/
144static void e1000_regdump(struct e1000_hw *hw, struct e1000_reg_info *reginfo)
145{
146 int n = 0;
147 char rname[16];
148 u32 regs[8];
149
150 switch (reginfo->ofs) {
151 case E1000_RXDCTL(0):
152 for (n = 0; n < 2; n++)
153 regs[n] = __er32(hw, E1000_RXDCTL(n));
154 break;
155 case E1000_TXDCTL(0):
156 for (n = 0; n < 2; n++)
157 regs[n] = __er32(hw, E1000_TXDCTL(n));
158 break;
159 case E1000_TARC(0):
160 for (n = 0; n < 2; n++)
161 regs[n] = __er32(hw, E1000_TARC(n));
162 break;
163 default:
164 pr_info("%-15s %08x\n",
165 reginfo->name, __er32(hw, reginfo->ofs));
166 return;
167 }
168
169 snprintf(rname, 16, "%s%s", reginfo->name, "[0-1]");
170 pr_info("%-15s %08x %08x\n", rname, regs[0], regs[1]);
171}
172
173static void e1000e_dump_ps_pages(struct e1000_adapter *adapter,
174 struct e1000_buffer *bi)
175{
176 int i;
177 struct e1000_ps_page *ps_page;
178
179 for (i = 0; i < adapter->rx_ps_pages; i++) {
180 ps_page = &bi->ps_pages[i];
181
182 if (ps_page->page) {
183 pr_info("packet dump for ps_page %d:\n", i);
184 print_hex_dump(KERN_INFO, "", DUMP_PREFIX_ADDRESS,
185 16, 1, page_address(ps_page->page),
186 PAGE_SIZE, true);
187 }
188 }
189}
190
191/**
192 * e1000e_dump - Print registers, Tx-ring and Rx-ring
193 * @adapter: board private structure
194 **/
195static void e1000e_dump(struct e1000_adapter *adapter)
196{
197 struct net_device *netdev = adapter->netdev;
198 struct e1000_hw *hw = &adapter->hw;
199 struct e1000_reg_info *reginfo;
200 struct e1000_ring *tx_ring = adapter->tx_ring;
201 struct e1000_tx_desc *tx_desc;
202 struct my_u0 {
203 __le64 a;
204 __le64 b;
205 } *u0;
206 struct e1000_buffer *buffer_info;
207 struct e1000_ring *rx_ring = adapter->rx_ring;
208 union e1000_rx_desc_packet_split *rx_desc_ps;
209 union e1000_rx_desc_extended *rx_desc;
210 struct my_u1 {
211 __le64 a;
212 __le64 b;
213 __le64 c;
214 __le64 d;
215 } *u1;
216 u32 staterr;
217 int i = 0;
218
219 if (!netif_msg_hw(adapter))
220 return;
221
222 /* Print netdevice Info */
223 if (netdev) {
224 dev_info(&adapter->pdev->dev, "Net device Info\n");
225 pr_info("Device Name state trans_start\n");
226 pr_info("%-15s %016lX %016lX\n", netdev->name,
227 netdev->state, dev_trans_start(netdev));
228 }
229
230 /* Print Registers */
231 dev_info(&adapter->pdev->dev, "Register Dump\n");
232 pr_info(" Register Name Value\n");
233 for (reginfo = (struct e1000_reg_info *)e1000_reg_info_tbl;
234 reginfo->name; reginfo++) {
235 e1000_regdump(hw, reginfo);
236 }
237
238 /* Print Tx Ring Summary */
239 if (!netdev || !netif_running(netdev))
240 return;
241
242 dev_info(&adapter->pdev->dev, "Tx Ring Summary\n");
243 pr_info("Queue [NTU] [NTC] [bi(ntc)->dma ] leng ntw timestamp\n");
244 buffer_info = &tx_ring->buffer_info[tx_ring->next_to_clean];
245 pr_info(" %5d %5X %5X %016llX %04X %3X %016llX\n",
246 0, tx_ring->next_to_use, tx_ring->next_to_clean,
247 (unsigned long long)buffer_info->dma,
248 buffer_info->length,
249 buffer_info->next_to_watch,
250 (unsigned long long)buffer_info->time_stamp);
251
252 /* Print Tx Ring */
253 if (!netif_msg_tx_done(adapter))
254 goto rx_ring_summary;
255
256 dev_info(&adapter->pdev->dev, "Tx Ring Dump\n");
257
258 /* Transmit Descriptor Formats - DEXT[29] is 0 (Legacy) or 1 (Extended)
259 *
260 * Legacy Transmit Descriptor
261 * +--------------------------------------------------------------+
262 * 0 | Buffer Address [63:0] (Reserved on Write Back) |
263 * +--------------------------------------------------------------+
264 * 8 | Special | CSS | Status | CMD | CSO | Length |
265 * +--------------------------------------------------------------+
266 * 63 48 47 36 35 32 31 24 23 16 15 0
267 *
268 * Extended Context Descriptor (DTYP=0x0) for TSO or checksum offload
269 * 63 48 47 40 39 32 31 16 15 8 7 0
270 * +----------------------------------------------------------------+
271 * 0 | TUCSE | TUCS0 | TUCSS | IPCSE | IPCS0 | IPCSS |
272 * +----------------------------------------------------------------+
273 * 8 | MSS | HDRLEN | RSV | STA | TUCMD | DTYP | PAYLEN |
274 * +----------------------------------------------------------------+
275 * 63 48 47 40 39 36 35 32 31 24 23 20 19 0
276 *
277 * Extended Data Descriptor (DTYP=0x1)
278 * +----------------------------------------------------------------+
279 * 0 | Buffer Address [63:0] |
280 * +----------------------------------------------------------------+
281 * 8 | VLAN tag | POPTS | Rsvd | Status | Command | DTYP | DTALEN |
282 * +----------------------------------------------------------------+
283 * 63 48 47 40 39 36 35 32 31 24 23 20 19 0
284 */
285 pr_info("Tl[desc] [address 63:0 ] [SpeCssSCmCsLen] [bi->dma ] leng ntw timestamp bi->skb <-- Legacy format\n");
286 pr_info("Tc[desc] [Ce CoCsIpceCoS] [MssHlRSCm0Plen] [bi->dma ] leng ntw timestamp bi->skb <-- Ext Context format\n");
287 pr_info("Td[desc] [address 63:0 ] [VlaPoRSCm1Dlen] [bi->dma ] leng ntw timestamp bi->skb <-- Ext Data format\n");
288 for (i = 0; tx_ring->desc && (i < tx_ring->count); i++) {
289 const char *next_desc;
290 tx_desc = E1000_TX_DESC(*tx_ring, i);
291 buffer_info = &tx_ring->buffer_info[i];
292 u0 = (struct my_u0 *)tx_desc;
293 if (i == tx_ring->next_to_use && i == tx_ring->next_to_clean)
294 next_desc = " NTC/U";
295 else if (i == tx_ring->next_to_use)
296 next_desc = " NTU";
297 else if (i == tx_ring->next_to_clean)
298 next_desc = " NTC";
299 else
300 next_desc = "";
301 pr_info("T%c[0x%03X] %016llX %016llX %016llX %04X %3X %016llX %p%s\n",
302 (!(le64_to_cpu(u0->b) & BIT(29)) ? 'l' :
303 ((le64_to_cpu(u0->b) & BIT(20)) ? 'd' : 'c')),
304 i,
305 (unsigned long long)le64_to_cpu(u0->a),
306 (unsigned long long)le64_to_cpu(u0->b),
307 (unsigned long long)buffer_info->dma,
308 buffer_info->length, buffer_info->next_to_watch,
309 (unsigned long long)buffer_info->time_stamp,
310 buffer_info->skb, next_desc);
311
312 if (netif_msg_pktdata(adapter) && buffer_info->skb)
313 print_hex_dump(KERN_INFO, "", DUMP_PREFIX_ADDRESS,
314 16, 1, buffer_info->skb->data,
315 buffer_info->skb->len, true);
316 }
317
318 /* Print Rx Ring Summary */
319rx_ring_summary:
320 dev_info(&adapter->pdev->dev, "Rx Ring Summary\n");
321 pr_info("Queue [NTU] [NTC]\n");
322 pr_info(" %5d %5X %5X\n",
323 0, rx_ring->next_to_use, rx_ring->next_to_clean);
324
325 /* Print Rx Ring */
326 if (!netif_msg_rx_status(adapter))
327 return;
328
329 dev_info(&adapter->pdev->dev, "Rx Ring Dump\n");
330 switch (adapter->rx_ps_pages) {
331 case 1:
332 case 2:
333 case 3:
334 /* [Extended] Packet Split Receive Descriptor Format
335 *
336 * +-----------------------------------------------------+
337 * 0 | Buffer Address 0 [63:0] |
338 * +-----------------------------------------------------+
339 * 8 | Buffer Address 1 [63:0] |
340 * +-----------------------------------------------------+
341 * 16 | Buffer Address 2 [63:0] |
342 * +-----------------------------------------------------+
343 * 24 | Buffer Address 3 [63:0] |
344 * +-----------------------------------------------------+
345 */
346 pr_info("R [desc] [buffer 0 63:0 ] [buffer 1 63:0 ] [buffer 2 63:0 ] [buffer 3 63:0 ] [bi->dma ] [bi->skb] <-- Ext Pkt Split format\n");
347 /* [Extended] Receive Descriptor (Write-Back) Format
348 *
349 * 63 48 47 32 31 13 12 8 7 4 3 0
350 * +------------------------------------------------------+
351 * 0 | Packet | IP | Rsvd | MRQ | Rsvd | MRQ RSS |
352 * | Checksum | Ident | | Queue | | Type |
353 * +------------------------------------------------------+
354 * 8 | VLAN Tag | Length | Extended Error | Extended Status |
355 * +------------------------------------------------------+
356 * 63 48 47 32 31 20 19 0
357 */
358 pr_info("RWB[desc] [ck ipid mrqhsh] [vl l0 ee es] [ l3 l2 l1 hs] [reserved ] ---------------- [bi->skb] <-- Ext Rx Write-Back format\n");
359 for (i = 0; i < rx_ring->count; i++) {
360 const char *next_desc;
361 buffer_info = &rx_ring->buffer_info[i];
362 rx_desc_ps = E1000_RX_DESC_PS(*rx_ring, i);
363 u1 = (struct my_u1 *)rx_desc_ps;
364 staterr =
365 le32_to_cpu(rx_desc_ps->wb.middle.status_error);
366
367 if (i == rx_ring->next_to_use)
368 next_desc = " NTU";
369 else if (i == rx_ring->next_to_clean)
370 next_desc = " NTC";
371 else
372 next_desc = "";
373
374 if (staterr & E1000_RXD_STAT_DD) {
375 /* Descriptor Done */
376 pr_info("%s[0x%03X] %016llX %016llX %016llX %016llX ---------------- %p%s\n",
377 "RWB", i,
378 (unsigned long long)le64_to_cpu(u1->a),
379 (unsigned long long)le64_to_cpu(u1->b),
380 (unsigned long long)le64_to_cpu(u1->c),
381 (unsigned long long)le64_to_cpu(u1->d),
382 buffer_info->skb, next_desc);
383 } else {
384 pr_info("%s[0x%03X] %016llX %016llX %016llX %016llX %016llX %p%s\n",
385 "R ", i,
386 (unsigned long long)le64_to_cpu(u1->a),
387 (unsigned long long)le64_to_cpu(u1->b),
388 (unsigned long long)le64_to_cpu(u1->c),
389 (unsigned long long)le64_to_cpu(u1->d),
390 (unsigned long long)buffer_info->dma,
391 buffer_info->skb, next_desc);
392
393 if (netif_msg_pktdata(adapter))
394 e1000e_dump_ps_pages(adapter,
395 buffer_info);
396 }
397 }
398 break;
399 default:
400 case 0:
401 /* Extended Receive Descriptor (Read) Format
402 *
403 * +-----------------------------------------------------+
404 * 0 | Buffer Address [63:0] |
405 * +-----------------------------------------------------+
406 * 8 | Reserved |
407 * +-----------------------------------------------------+
408 */
409 pr_info("R [desc] [buf addr 63:0 ] [reserved 63:0 ] [bi->dma ] [bi->skb] <-- Ext (Read) format\n");
410 /* Extended Receive Descriptor (Write-Back) Format
411 *
412 * 63 48 47 32 31 24 23 4 3 0
413 * +------------------------------------------------------+
414 * | RSS Hash | | | |
415 * 0 +-------------------+ Rsvd | Reserved | MRQ RSS |
416 * | Packet | IP | | | Type |
417 * | Checksum | Ident | | | |
418 * +------------------------------------------------------+
419 * 8 | VLAN Tag | Length | Extended Error | Extended Status |
420 * +------------------------------------------------------+
421 * 63 48 47 32 31 20 19 0
422 */
423 pr_info("RWB[desc] [cs ipid mrq] [vt ln xe xs] [bi->skb] <-- Ext (Write-Back) format\n");
424
425 for (i = 0; i < rx_ring->count; i++) {
426 const char *next_desc;
427
428 buffer_info = &rx_ring->buffer_info[i];
429 rx_desc = E1000_RX_DESC_EXT(*rx_ring, i);
430 u1 = (struct my_u1 *)rx_desc;
431 staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
432
433 if (i == rx_ring->next_to_use)
434 next_desc = " NTU";
435 else if (i == rx_ring->next_to_clean)
436 next_desc = " NTC";
437 else
438 next_desc = "";
439
440 if (staterr & E1000_RXD_STAT_DD) {
441 /* Descriptor Done */
442 pr_info("%s[0x%03X] %016llX %016llX ---------------- %p%s\n",
443 "RWB", i,
444 (unsigned long long)le64_to_cpu(u1->a),
445 (unsigned long long)le64_to_cpu(u1->b),
446 buffer_info->skb, next_desc);
447 } else {
448 pr_info("%s[0x%03X] %016llX %016llX %016llX %p%s\n",
449 "R ", i,
450 (unsigned long long)le64_to_cpu(u1->a),
451 (unsigned long long)le64_to_cpu(u1->b),
452 (unsigned long long)buffer_info->dma,
453 buffer_info->skb, next_desc);
454
455 if (netif_msg_pktdata(adapter) &&
456 buffer_info->skb)
457 print_hex_dump(KERN_INFO, "",
458 DUMP_PREFIX_ADDRESS, 16,
459 1,
460 buffer_info->skb->data,
461 adapter->rx_buffer_len,
462 true);
463 }
464 }
465 }
466}
467
468/**
469 * e1000_desc_unused - calculate if we have unused descriptors
470 * @ring: pointer to ring struct to perform calculation on
471 **/
472static int e1000_desc_unused(struct e1000_ring *ring)
473{
474 if (ring->next_to_clean > ring->next_to_use)
475 return ring->next_to_clean - ring->next_to_use - 1;
476
477 return ring->count + ring->next_to_clean - ring->next_to_use - 1;
478}
479
480/**
481 * e1000e_systim_to_hwtstamp - convert system time value to hw time stamp
482 * @adapter: board private structure
483 * @hwtstamps: time stamp structure to update
484 * @systim: unsigned 64bit system time value.
485 *
486 * Convert the system time value stored in the RX/TXSTMP registers into a
487 * hwtstamp which can be used by the upper level time stamping functions.
488 *
489 * The 'systim_lock' spinlock is used to protect the consistency of the
490 * system time value. This is needed because reading the 64 bit time
491 * value involves reading two 32 bit registers. The first read latches the
492 * value.
493 **/
494static void e1000e_systim_to_hwtstamp(struct e1000_adapter *adapter,
495 struct skb_shared_hwtstamps *hwtstamps,
496 u64 systim)
497{
498 u64 ns;
499 unsigned long flags;
500
501 spin_lock_irqsave(&adapter->systim_lock, flags);
502 ns = timecounter_cyc2time(&adapter->tc, systim);
503 spin_unlock_irqrestore(&adapter->systim_lock, flags);
504
505 memset(hwtstamps, 0, sizeof(*hwtstamps));
506 hwtstamps->hwtstamp = ns_to_ktime(ns);
507}
508
509/**
510 * e1000e_rx_hwtstamp - utility function which checks for Rx time stamp
511 * @adapter: board private structure
512 * @status: descriptor extended error and status field
513 * @skb: particular skb to include time stamp
514 *
515 * If the time stamp is valid, convert it into the timecounter ns value
516 * and store that result into the shhwtstamps structure which is passed
517 * up the network stack.
518 **/
519static void e1000e_rx_hwtstamp(struct e1000_adapter *adapter, u32 status,
520 struct sk_buff *skb)
521{
522 struct e1000_hw *hw = &adapter->hw;
523 u64 rxstmp;
524
525 if (!(adapter->flags & FLAG_HAS_HW_TIMESTAMP) ||
526 !(status & E1000_RXDEXT_STATERR_TST) ||
527 !(er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_VALID))
528 return;
529
530 /* The Rx time stamp registers contain the time stamp. No other
531 * received packet will be time stamped until the Rx time stamp
532 * registers are read. Because only one packet can be time stamped
533 * at a time, the register values must belong to this packet and
534 * therefore none of the other additional attributes need to be
535 * compared.
536 */
537 rxstmp = (u64)er32(RXSTMPL);
538 rxstmp |= (u64)er32(RXSTMPH) << 32;
539 e1000e_systim_to_hwtstamp(adapter, skb_hwtstamps(skb), rxstmp);
540
541 adapter->flags2 &= ~FLAG2_CHECK_RX_HWTSTAMP;
542}
543
544/**
545 * e1000_receive_skb - helper function to handle Rx indications
546 * @adapter: board private structure
547 * @netdev: pointer to netdev struct
548 * @staterr: descriptor extended error and status field as written by hardware
549 * @vlan: descriptor vlan field as written by hardware (no le/be conversion)
550 * @skb: pointer to sk_buff to be indicated to stack
551 **/
552static void e1000_receive_skb(struct e1000_adapter *adapter,
553 struct net_device *netdev, struct sk_buff *skb,
554 u32 staterr, __le16 vlan)
555{
556 u16 tag = le16_to_cpu(vlan);
557
558 e1000e_rx_hwtstamp(adapter, staterr, skb);
559
560 skb->protocol = eth_type_trans(skb, netdev);
561
562 if (staterr & E1000_RXD_STAT_VP)
563 __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), tag);
564
565 napi_gro_receive(&adapter->napi, skb);
566}
567
568/**
569 * e1000_rx_checksum - Receive Checksum Offload
570 * @adapter: board private structure
571 * @status_err: receive descriptor status and error fields
572 * @skb: socket buffer with received data
573 **/
574static void e1000_rx_checksum(struct e1000_adapter *adapter, u32 status_err,
575 struct sk_buff *skb)
576{
577 u16 status = (u16)status_err;
578 u8 errors = (u8)(status_err >> 24);
579
580 skb_checksum_none_assert(skb);
581
582 /* Rx checksum disabled */
583 if (!(adapter->netdev->features & NETIF_F_RXCSUM))
584 return;
585
586 /* Ignore Checksum bit is set */
587 if (status & E1000_RXD_STAT_IXSM)
588 return;
589
590 /* TCP/UDP checksum error bit or IP checksum error bit is set */
591 if (errors & (E1000_RXD_ERR_TCPE | E1000_RXD_ERR_IPE)) {
592 /* let the stack verify checksum errors */
593 adapter->hw_csum_err++;
594 return;
595 }
596
597 /* TCP/UDP Checksum has not been calculated */
598 if (!(status & (E1000_RXD_STAT_TCPCS | E1000_RXD_STAT_UDPCS)))
599 return;
600
601 /* It must be a TCP or UDP packet with a valid checksum */
602 skb->ip_summed = CHECKSUM_UNNECESSARY;
603 adapter->hw_csum_good++;
604}
605
606static void e1000e_update_rdt_wa(struct e1000_ring *rx_ring, unsigned int i)
607{
608 struct e1000_adapter *adapter = rx_ring->adapter;
609 struct e1000_hw *hw = &adapter->hw;
610
611 __ew32_prepare(hw);
612 writel(i, rx_ring->tail);
613
614 if (unlikely(i != readl(rx_ring->tail))) {
615 u32 rctl = er32(RCTL);
616
617 ew32(RCTL, rctl & ~E1000_RCTL_EN);
618 e_err("ME firmware caused invalid RDT - resetting\n");
619 schedule_work(&adapter->reset_task);
620 }
621}
622
623static void e1000e_update_tdt_wa(struct e1000_ring *tx_ring, unsigned int i)
624{
625 struct e1000_adapter *adapter = tx_ring->adapter;
626 struct e1000_hw *hw = &adapter->hw;
627
628 __ew32_prepare(hw);
629 writel(i, tx_ring->tail);
630
631 if (unlikely(i != readl(tx_ring->tail))) {
632 u32 tctl = er32(TCTL);
633
634 ew32(TCTL, tctl & ~E1000_TCTL_EN);
635 e_err("ME firmware caused invalid TDT - resetting\n");
636 schedule_work(&adapter->reset_task);
637 }
638}
639
640/**
641 * e1000_alloc_rx_buffers - Replace used receive buffers
642 * @rx_ring: Rx descriptor ring
643 * @cleaned_count: number to reallocate
644 * @gfp: flags for allocation
645 **/
646static void e1000_alloc_rx_buffers(struct e1000_ring *rx_ring,
647 int cleaned_count, gfp_t gfp)
648{
649 struct e1000_adapter *adapter = rx_ring->adapter;
650 struct net_device *netdev = adapter->netdev;
651 struct pci_dev *pdev = adapter->pdev;
652 union e1000_rx_desc_extended *rx_desc;
653 struct e1000_buffer *buffer_info;
654 struct sk_buff *skb;
655 unsigned int i;
656 unsigned int bufsz = adapter->rx_buffer_len;
657
658 i = rx_ring->next_to_use;
659 buffer_info = &rx_ring->buffer_info[i];
660
661 while (cleaned_count--) {
662 skb = buffer_info->skb;
663 if (skb) {
664 skb_trim(skb, 0);
665 goto map_skb;
666 }
667
668 skb = __netdev_alloc_skb_ip_align(netdev, bufsz, gfp);
669 if (!skb) {
670 /* Better luck next round */
671 adapter->alloc_rx_buff_failed++;
672 break;
673 }
674
675 buffer_info->skb = skb;
676map_skb:
677 buffer_info->dma = dma_map_single(&pdev->dev, skb->data,
678 adapter->rx_buffer_len,
679 DMA_FROM_DEVICE);
680 if (dma_mapping_error(&pdev->dev, buffer_info->dma)) {
681 dev_err(&pdev->dev, "Rx DMA map failed\n");
682 adapter->rx_dma_failed++;
683 break;
684 }
685
686 rx_desc = E1000_RX_DESC_EXT(*rx_ring, i);
687 rx_desc->read.buffer_addr = cpu_to_le64(buffer_info->dma);
688
689 if (unlikely(!(i & (E1000_RX_BUFFER_WRITE - 1)))) {
690 /* Force memory writes to complete before letting h/w
691 * know there are new descriptors to fetch. (Only
692 * applicable for weak-ordered memory model archs,
693 * such as IA-64).
694 */
695 wmb();
696 if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA)
697 e1000e_update_rdt_wa(rx_ring, i);
698 else
699 writel(i, rx_ring->tail);
700 }
701 i++;
702 if (i == rx_ring->count)
703 i = 0;
704 buffer_info = &rx_ring->buffer_info[i];
705 }
706
707 rx_ring->next_to_use = i;
708}
709
710/**
711 * e1000_alloc_rx_buffers_ps - Replace used receive buffers; packet split
712 * @rx_ring: Rx descriptor ring
713 * @cleaned_count: number to reallocate
714 * @gfp: flags for allocation
715 **/
716static void e1000_alloc_rx_buffers_ps(struct e1000_ring *rx_ring,
717 int cleaned_count, gfp_t gfp)
718{
719 struct e1000_adapter *adapter = rx_ring->adapter;
720 struct net_device *netdev = adapter->netdev;
721 struct pci_dev *pdev = adapter->pdev;
722 union e1000_rx_desc_packet_split *rx_desc;
723 struct e1000_buffer *buffer_info;
724 struct e1000_ps_page *ps_page;
725 struct sk_buff *skb;
726 unsigned int i, j;
727
728 i = rx_ring->next_to_use;
729 buffer_info = &rx_ring->buffer_info[i];
730
731 while (cleaned_count--) {
732 rx_desc = E1000_RX_DESC_PS(*rx_ring, i);
733
734 for (j = 0; j < PS_PAGE_BUFFERS; j++) {
735 ps_page = &buffer_info->ps_pages[j];
736 if (j >= adapter->rx_ps_pages) {
737 /* all unused desc entries get hw null ptr */
738 rx_desc->read.buffer_addr[j + 1] =
739 ~cpu_to_le64(0);
740 continue;
741 }
742 if (!ps_page->page) {
743 ps_page->page = alloc_page(gfp);
744 if (!ps_page->page) {
745 adapter->alloc_rx_buff_failed++;
746 goto no_buffers;
747 }
748 ps_page->dma = dma_map_page(&pdev->dev,
749 ps_page->page,
750 0, PAGE_SIZE,
751 DMA_FROM_DEVICE);
752 if (dma_mapping_error(&pdev->dev,
753 ps_page->dma)) {
754 dev_err(&adapter->pdev->dev,
755 "Rx DMA page map failed\n");
756 adapter->rx_dma_failed++;
757 goto no_buffers;
758 }
759 }
760 /* Refresh the desc even if buffer_addrs
761 * didn't change because each write-back
762 * erases this info.
763 */
764 rx_desc->read.buffer_addr[j + 1] =
765 cpu_to_le64(ps_page->dma);
766 }
767
768 skb = __netdev_alloc_skb_ip_align(netdev, adapter->rx_ps_bsize0,
769 gfp);
770
771 if (!skb) {
772 adapter->alloc_rx_buff_failed++;
773 break;
774 }
775
776 buffer_info->skb = skb;
777 buffer_info->dma = dma_map_single(&pdev->dev, skb->data,
778 adapter->rx_ps_bsize0,
779 DMA_FROM_DEVICE);
780 if (dma_mapping_error(&pdev->dev, buffer_info->dma)) {
781 dev_err(&pdev->dev, "Rx DMA map failed\n");
782 adapter->rx_dma_failed++;
783 /* cleanup skb */
784 dev_kfree_skb_any(skb);
785 buffer_info->skb = NULL;
786 break;
787 }
788
789 rx_desc->read.buffer_addr[0] = cpu_to_le64(buffer_info->dma);
790
791 if (unlikely(!(i & (E1000_RX_BUFFER_WRITE - 1)))) {
792 /* Force memory writes to complete before letting h/w
793 * know there are new descriptors to fetch. (Only
794 * applicable for weak-ordered memory model archs,
795 * such as IA-64).
796 */
797 wmb();
798 if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA)
799 e1000e_update_rdt_wa(rx_ring, i << 1);
800 else
801 writel(i << 1, rx_ring->tail);
802 }
803
804 i++;
805 if (i == rx_ring->count)
806 i = 0;
807 buffer_info = &rx_ring->buffer_info[i];
808 }
809
810no_buffers:
811 rx_ring->next_to_use = i;
812}
813
814/**
815 * e1000_alloc_jumbo_rx_buffers - Replace used jumbo receive buffers
816 * @rx_ring: Rx descriptor ring
817 * @cleaned_count: number of buffers to allocate this pass
818 * @gfp: flags for allocation
819 **/
820
821static void e1000_alloc_jumbo_rx_buffers(struct e1000_ring *rx_ring,
822 int cleaned_count, gfp_t gfp)
823{
824 struct e1000_adapter *adapter = rx_ring->adapter;
825 struct net_device *netdev = adapter->netdev;
826 struct pci_dev *pdev = adapter->pdev;
827 union e1000_rx_desc_extended *rx_desc;
828 struct e1000_buffer *buffer_info;
829 struct sk_buff *skb;
830 unsigned int i;
831 unsigned int bufsz = 256 - 16; /* for skb_reserve */
832
833 i = rx_ring->next_to_use;
834 buffer_info = &rx_ring->buffer_info[i];
835
836 while (cleaned_count--) {
837 skb = buffer_info->skb;
838 if (skb) {
839 skb_trim(skb, 0);
840 goto check_page;
841 }
842
843 skb = __netdev_alloc_skb_ip_align(netdev, bufsz, gfp);
844 if (unlikely(!skb)) {
845 /* Better luck next round */
846 adapter->alloc_rx_buff_failed++;
847 break;
848 }
849
850 buffer_info->skb = skb;
851check_page:
852 /* allocate a new page if necessary */
853 if (!buffer_info->page) {
854 buffer_info->page = alloc_page(gfp);
855 if (unlikely(!buffer_info->page)) {
856 adapter->alloc_rx_buff_failed++;
857 break;
858 }
859 }
860
861 if (!buffer_info->dma) {
862 buffer_info->dma = dma_map_page(&pdev->dev,
863 buffer_info->page, 0,
864 PAGE_SIZE,
865 DMA_FROM_DEVICE);
866 if (dma_mapping_error(&pdev->dev, buffer_info->dma)) {
867 adapter->alloc_rx_buff_failed++;
868 break;
869 }
870 }
871
872 rx_desc = E1000_RX_DESC_EXT(*rx_ring, i);
873 rx_desc->read.buffer_addr = cpu_to_le64(buffer_info->dma);
874
875 if (unlikely(++i == rx_ring->count))
876 i = 0;
877 buffer_info = &rx_ring->buffer_info[i];
878 }
879
880 if (likely(rx_ring->next_to_use != i)) {
881 rx_ring->next_to_use = i;
882 if (unlikely(i-- == 0))
883 i = (rx_ring->count - 1);
884
885 /* Force memory writes to complete before letting h/w
886 * know there are new descriptors to fetch. (Only
887 * applicable for weak-ordered memory model archs,
888 * such as IA-64).
889 */
890 wmb();
891 if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA)
892 e1000e_update_rdt_wa(rx_ring, i);
893 else
894 writel(i, rx_ring->tail);
895 }
896}
897
898static inline void e1000_rx_hash(struct net_device *netdev, __le32 rss,
899 struct sk_buff *skb)
900{
901 if (netdev->features & NETIF_F_RXHASH)
902 skb_set_hash(skb, le32_to_cpu(rss), PKT_HASH_TYPE_L3);
903}
904
905/**
906 * e1000_clean_rx_irq - Send received data up the network stack
907 * @rx_ring: Rx descriptor ring
908 * @work_done: output parameter for indicating completed work
909 * @work_to_do: how many packets we can clean
910 *
911 * the return value indicates whether actual cleaning was done, there
912 * is no guarantee that everything was cleaned
913 **/
914static bool e1000_clean_rx_irq(struct e1000_ring *rx_ring, int *work_done,
915 int work_to_do)
916{
917 struct e1000_adapter *adapter = rx_ring->adapter;
918 struct net_device *netdev = adapter->netdev;
919 struct pci_dev *pdev = adapter->pdev;
920 struct e1000_hw *hw = &adapter->hw;
921 union e1000_rx_desc_extended *rx_desc, *next_rxd;
922 struct e1000_buffer *buffer_info, *next_buffer;
923 u32 length, staterr;
924 unsigned int i;
925 int cleaned_count = 0;
926 bool cleaned = false;
927 unsigned int total_rx_bytes = 0, total_rx_packets = 0;
928
929 i = rx_ring->next_to_clean;
930 rx_desc = E1000_RX_DESC_EXT(*rx_ring, i);
931 staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
932 buffer_info = &rx_ring->buffer_info[i];
933
934 while (staterr & E1000_RXD_STAT_DD) {
935 struct sk_buff *skb;
936
937 if (*work_done >= work_to_do)
938 break;
939 (*work_done)++;
940 dma_rmb(); /* read descriptor and rx_buffer_info after status DD */
941
942 skb = buffer_info->skb;
943 buffer_info->skb = NULL;
944
945 prefetch(skb->data - NET_IP_ALIGN);
946
947 i++;
948 if (i == rx_ring->count)
949 i = 0;
950 next_rxd = E1000_RX_DESC_EXT(*rx_ring, i);
951 prefetch(next_rxd);
952
953 next_buffer = &rx_ring->buffer_info[i];
954
955 cleaned = true;
956 cleaned_count++;
957 dma_unmap_single(&pdev->dev, buffer_info->dma,
958 adapter->rx_buffer_len, DMA_FROM_DEVICE);
959 buffer_info->dma = 0;
960
961 length = le16_to_cpu(rx_desc->wb.upper.length);
962
963 /* !EOP means multiple descriptors were used to store a single
964 * packet, if that's the case we need to toss it. In fact, we
965 * need to toss every packet with the EOP bit clear and the
966 * next frame that _does_ have the EOP bit set, as it is by
967 * definition only a frame fragment
968 */
969 if (unlikely(!(staterr & E1000_RXD_STAT_EOP)))
970 adapter->flags2 |= FLAG2_IS_DISCARDING;
971
972 if (adapter->flags2 & FLAG2_IS_DISCARDING) {
973 /* All receives must fit into a single buffer */
974 e_dbg("Receive packet consumed multiple buffers\n");
975 /* recycle */
976 buffer_info->skb = skb;
977 if (staterr & E1000_RXD_STAT_EOP)
978 adapter->flags2 &= ~FLAG2_IS_DISCARDING;
979 goto next_desc;
980 }
981
982 if (unlikely((staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK) &&
983 !(netdev->features & NETIF_F_RXALL))) {
984 /* recycle */
985 buffer_info->skb = skb;
986 goto next_desc;
987 }
988
989 /* adjust length to remove Ethernet CRC */
990 if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) {
991 /* If configured to store CRC, don't subtract FCS,
992 * but keep the FCS bytes out of the total_rx_bytes
993 * counter
994 */
995 if (netdev->features & NETIF_F_RXFCS)
996 total_rx_bytes -= 4;
997 else
998 length -= 4;
999 }
1000
1001 total_rx_bytes += length;
1002 total_rx_packets++;
1003
1004 /* code added for copybreak, this should improve
1005 * performance for small packets with large amounts
1006 * of reassembly being done in the stack
1007 */
1008 if (length < copybreak) {
1009 struct sk_buff *new_skb =
1010 napi_alloc_skb(&adapter->napi, length);
1011 if (new_skb) {
1012 skb_copy_to_linear_data_offset(new_skb,
1013 -NET_IP_ALIGN,
1014 (skb->data -
1015 NET_IP_ALIGN),
1016 (length +
1017 NET_IP_ALIGN));
1018 /* save the skb in buffer_info as good */
1019 buffer_info->skb = skb;
1020 skb = new_skb;
1021 }
1022 /* else just continue with the old one */
1023 }
1024 /* end copybreak code */
1025 skb_put(skb, length);
1026
1027 /* Receive Checksum Offload */
1028 e1000_rx_checksum(adapter, staterr, skb);
1029
1030 e1000_rx_hash(netdev, rx_desc->wb.lower.hi_dword.rss, skb);
1031
1032 e1000_receive_skb(adapter, netdev, skb, staterr,
1033 rx_desc->wb.upper.vlan);
1034
1035next_desc:
1036 rx_desc->wb.upper.status_error &= cpu_to_le32(~0xFF);
1037
1038 /* return some buffers to hardware, one at a time is too slow */
1039 if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
1040 adapter->alloc_rx_buf(rx_ring, cleaned_count,
1041 GFP_ATOMIC);
1042 cleaned_count = 0;
1043 }
1044
1045 /* use prefetched values */
1046 rx_desc = next_rxd;
1047 buffer_info = next_buffer;
1048
1049 staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
1050 }
1051 rx_ring->next_to_clean = i;
1052
1053 cleaned_count = e1000_desc_unused(rx_ring);
1054 if (cleaned_count)
1055 adapter->alloc_rx_buf(rx_ring, cleaned_count, GFP_ATOMIC);
1056
1057 adapter->total_rx_bytes += total_rx_bytes;
1058 adapter->total_rx_packets += total_rx_packets;
1059 return cleaned;
1060}
1061
1062static void e1000_put_txbuf(struct e1000_ring *tx_ring,
1063 struct e1000_buffer *buffer_info,
1064 bool drop)
1065{
1066 struct e1000_adapter *adapter = tx_ring->adapter;
1067
1068 if (buffer_info->dma) {
1069 if (buffer_info->mapped_as_page)
1070 dma_unmap_page(&adapter->pdev->dev, buffer_info->dma,
1071 buffer_info->length, DMA_TO_DEVICE);
1072 else
1073 dma_unmap_single(&adapter->pdev->dev, buffer_info->dma,
1074 buffer_info->length, DMA_TO_DEVICE);
1075 buffer_info->dma = 0;
1076 }
1077 if (buffer_info->skb) {
1078 if (drop)
1079 dev_kfree_skb_any(buffer_info->skb);
1080 else
1081 dev_consume_skb_any(buffer_info->skb);
1082 buffer_info->skb = NULL;
1083 }
1084 buffer_info->time_stamp = 0;
1085}
1086
1087static void e1000_print_hw_hang(struct work_struct *work)
1088{
1089 struct e1000_adapter *adapter = container_of(work,
1090 struct e1000_adapter,
1091 print_hang_task);
1092 struct net_device *netdev = adapter->netdev;
1093 struct e1000_ring *tx_ring = adapter->tx_ring;
1094 unsigned int i = tx_ring->next_to_clean;
1095 unsigned int eop = tx_ring->buffer_info[i].next_to_watch;
1096 struct e1000_tx_desc *eop_desc = E1000_TX_DESC(*tx_ring, eop);
1097 struct e1000_hw *hw = &adapter->hw;
1098 u16 phy_status, phy_1000t_status, phy_ext_status;
1099 u16 pci_status;
1100
1101 if (test_bit(__E1000_DOWN, &adapter->state))
1102 return;
1103
1104 if (!adapter->tx_hang_recheck && (adapter->flags2 & FLAG2_DMA_BURST)) {
1105 /* May be block on write-back, flush and detect again
1106 * flush pending descriptor writebacks to memory
1107 */
1108 ew32(TIDV, adapter->tx_int_delay | E1000_TIDV_FPD);
1109 /* execute the writes immediately */
1110 e1e_flush();
1111 /* Due to rare timing issues, write to TIDV again to ensure
1112 * the write is successful
1113 */
1114 ew32(TIDV, adapter->tx_int_delay | E1000_TIDV_FPD);
1115 /* execute the writes immediately */
1116 e1e_flush();
1117 adapter->tx_hang_recheck = true;
1118 return;
1119 }
1120 adapter->tx_hang_recheck = false;
1121
1122 if (er32(TDH(0)) == er32(TDT(0))) {
1123 e_dbg("false hang detected, ignoring\n");
1124 return;
1125 }
1126
1127 /* Real hang detected */
1128 netif_stop_queue(netdev);
1129
1130 e1e_rphy(hw, MII_BMSR, &phy_status);
1131 e1e_rphy(hw, MII_STAT1000, &phy_1000t_status);
1132 e1e_rphy(hw, MII_ESTATUS, &phy_ext_status);
1133
1134 pci_read_config_word(adapter->pdev, PCI_STATUS, &pci_status);
1135
1136 /* detected Hardware unit hang */
1137 e_err("Detected Hardware Unit Hang:\n"
1138 " TDH <%x>\n"
1139 " TDT <%x>\n"
1140 " next_to_use <%x>\n"
1141 " next_to_clean <%x>\n"
1142 "buffer_info[next_to_clean]:\n"
1143 " time_stamp <%lx>\n"
1144 " next_to_watch <%x>\n"
1145 " jiffies <%lx>\n"
1146 " next_to_watch.status <%x>\n"
1147 "MAC Status <%x>\n"
1148 "PHY Status <%x>\n"
1149 "PHY 1000BASE-T Status <%x>\n"
1150 "PHY Extended Status <%x>\n"
1151 "PCI Status <%x>\n",
1152 readl(tx_ring->head), readl(tx_ring->tail), tx_ring->next_to_use,
1153 tx_ring->next_to_clean, tx_ring->buffer_info[eop].time_stamp,
1154 eop, jiffies, eop_desc->upper.fields.status, er32(STATUS),
1155 phy_status, phy_1000t_status, phy_ext_status, pci_status);
1156
1157 e1000e_dump(adapter);
1158
1159 /* Suggest workaround for known h/w issue */
1160 if ((hw->mac.type == e1000_pchlan) && (er32(CTRL) & E1000_CTRL_TFCE))
1161 e_err("Try turning off Tx pause (flow control) via ethtool\n");
1162}
1163
1164/**
1165 * e1000e_tx_hwtstamp_work - check for Tx time stamp
1166 * @work: pointer to work struct
1167 *
1168 * This work function polls the TSYNCTXCTL valid bit to determine when a
1169 * timestamp has been taken for the current stored skb. The timestamp must
1170 * be for this skb because only one such packet is allowed in the queue.
1171 */
1172static void e1000e_tx_hwtstamp_work(struct work_struct *work)
1173{
1174 struct e1000_adapter *adapter = container_of(work, struct e1000_adapter,
1175 tx_hwtstamp_work);
1176 struct e1000_hw *hw = &adapter->hw;
1177
1178 if (er32(TSYNCTXCTL) & E1000_TSYNCTXCTL_VALID) {
1179 struct sk_buff *skb = adapter->tx_hwtstamp_skb;
1180 struct skb_shared_hwtstamps shhwtstamps;
1181 u64 txstmp;
1182
1183 txstmp = er32(TXSTMPL);
1184 txstmp |= (u64)er32(TXSTMPH) << 32;
1185
1186 e1000e_systim_to_hwtstamp(adapter, &shhwtstamps, txstmp);
1187
1188 /* Clear the global tx_hwtstamp_skb pointer and force writes
1189 * prior to notifying the stack of a Tx timestamp.
1190 */
1191 adapter->tx_hwtstamp_skb = NULL;
1192 wmb(); /* force write prior to skb_tstamp_tx */
1193
1194 skb_tstamp_tx(skb, &shhwtstamps);
1195 dev_consume_skb_any(skb);
1196 } else if (time_after(jiffies, adapter->tx_hwtstamp_start
1197 + adapter->tx_timeout_factor * HZ)) {
1198 dev_kfree_skb_any(adapter->tx_hwtstamp_skb);
1199 adapter->tx_hwtstamp_skb = NULL;
1200 adapter->tx_hwtstamp_timeouts++;
1201 e_warn("clearing Tx timestamp hang\n");
1202 } else {
1203 /* reschedule to check later */
1204 schedule_work(&adapter->tx_hwtstamp_work);
1205 }
1206}
1207
1208/**
1209 * e1000_clean_tx_irq - Reclaim resources after transmit completes
1210 * @tx_ring: Tx descriptor ring
1211 *
1212 * the return value indicates whether actual cleaning was done, there
1213 * is no guarantee that everything was cleaned
1214 **/
1215static bool e1000_clean_tx_irq(struct e1000_ring *tx_ring)
1216{
1217 struct e1000_adapter *adapter = tx_ring->adapter;
1218 struct net_device *netdev = adapter->netdev;
1219 struct e1000_hw *hw = &adapter->hw;
1220 struct e1000_tx_desc *tx_desc, *eop_desc;
1221 struct e1000_buffer *buffer_info;
1222 unsigned int i, eop;
1223 unsigned int count = 0;
1224 unsigned int total_tx_bytes = 0, total_tx_packets = 0;
1225 unsigned int bytes_compl = 0, pkts_compl = 0;
1226
1227 i = tx_ring->next_to_clean;
1228 eop = tx_ring->buffer_info[i].next_to_watch;
1229 eop_desc = E1000_TX_DESC(*tx_ring, eop);
1230
1231 while ((eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) &&
1232 (count < tx_ring->count)) {
1233 bool cleaned = false;
1234
1235 dma_rmb(); /* read buffer_info after eop_desc */
1236 for (; !cleaned; count++) {
1237 tx_desc = E1000_TX_DESC(*tx_ring, i);
1238 buffer_info = &tx_ring->buffer_info[i];
1239 cleaned = (i == eop);
1240
1241 if (cleaned) {
1242 total_tx_packets += buffer_info->segs;
1243 total_tx_bytes += buffer_info->bytecount;
1244 if (buffer_info->skb) {
1245 bytes_compl += buffer_info->skb->len;
1246 pkts_compl++;
1247 }
1248 }
1249
1250 e1000_put_txbuf(tx_ring, buffer_info, false);
1251 tx_desc->upper.data = 0;
1252
1253 i++;
1254 if (i == tx_ring->count)
1255 i = 0;
1256 }
1257
1258 if (i == tx_ring->next_to_use)
1259 break;
1260 eop = tx_ring->buffer_info[i].next_to_watch;
1261 eop_desc = E1000_TX_DESC(*tx_ring, eop);
1262 }
1263
1264 tx_ring->next_to_clean = i;
1265
1266 netdev_completed_queue(netdev, pkts_compl, bytes_compl);
1267
1268#define TX_WAKE_THRESHOLD 32
1269 if (count && netif_carrier_ok(netdev) &&
1270 e1000_desc_unused(tx_ring) >= TX_WAKE_THRESHOLD) {
1271 /* Make sure that anybody stopping the queue after this
1272 * sees the new next_to_clean.
1273 */
1274 smp_mb();
1275
1276 if (netif_queue_stopped(netdev) &&
1277 !(test_bit(__E1000_DOWN, &adapter->state))) {
1278 netif_wake_queue(netdev);
1279 ++adapter->restart_queue;
1280 }
1281 }
1282
1283 if (adapter->detect_tx_hung) {
1284 /* Detect a transmit hang in hardware, this serializes the
1285 * check with the clearing of time_stamp and movement of i
1286 */
1287 adapter->detect_tx_hung = false;
1288 if (tx_ring->buffer_info[i].time_stamp &&
1289 time_after(jiffies, tx_ring->buffer_info[i].time_stamp
1290 + (adapter->tx_timeout_factor * HZ)) &&
1291 !(er32(STATUS) & E1000_STATUS_TXOFF))
1292 schedule_work(&adapter->print_hang_task);
1293 else
1294 adapter->tx_hang_recheck = false;
1295 }
1296 adapter->total_tx_bytes += total_tx_bytes;
1297 adapter->total_tx_packets += total_tx_packets;
1298 return count < tx_ring->count;
1299}
1300
1301/**
1302 * e1000_clean_rx_irq_ps - Send received data up the network stack; packet split
1303 * @rx_ring: Rx descriptor ring
1304 * @work_done: output parameter for indicating completed work
1305 * @work_to_do: how many packets we can clean
1306 *
1307 * the return value indicates whether actual cleaning was done, there
1308 * is no guarantee that everything was cleaned
1309 **/
1310static bool e1000_clean_rx_irq_ps(struct e1000_ring *rx_ring, int *work_done,
1311 int work_to_do)
1312{
1313 struct e1000_adapter *adapter = rx_ring->adapter;
1314 struct e1000_hw *hw = &adapter->hw;
1315 union e1000_rx_desc_packet_split *rx_desc, *next_rxd;
1316 struct net_device *netdev = adapter->netdev;
1317 struct pci_dev *pdev = adapter->pdev;
1318 struct e1000_buffer *buffer_info, *next_buffer;
1319 struct e1000_ps_page *ps_page;
1320 struct sk_buff *skb;
1321 unsigned int i, j;
1322 u32 length, staterr;
1323 int cleaned_count = 0;
1324 bool cleaned = false;
1325 unsigned int total_rx_bytes = 0, total_rx_packets = 0;
1326
1327 i = rx_ring->next_to_clean;
1328 rx_desc = E1000_RX_DESC_PS(*rx_ring, i);
1329 staterr = le32_to_cpu(rx_desc->wb.middle.status_error);
1330 buffer_info = &rx_ring->buffer_info[i];
1331
1332 while (staterr & E1000_RXD_STAT_DD) {
1333 if (*work_done >= work_to_do)
1334 break;
1335 (*work_done)++;
1336 skb = buffer_info->skb;
1337 dma_rmb(); /* read descriptor and rx_buffer_info after status DD */
1338
1339 /* in the packet split case this is header only */
1340 prefetch(skb->data - NET_IP_ALIGN);
1341
1342 i++;
1343 if (i == rx_ring->count)
1344 i = 0;
1345 next_rxd = E1000_RX_DESC_PS(*rx_ring, i);
1346 prefetch(next_rxd);
1347
1348 next_buffer = &rx_ring->buffer_info[i];
1349
1350 cleaned = true;
1351 cleaned_count++;
1352 dma_unmap_single(&pdev->dev, buffer_info->dma,
1353 adapter->rx_ps_bsize0, DMA_FROM_DEVICE);
1354 buffer_info->dma = 0;
1355
1356 /* see !EOP comment in other Rx routine */
1357 if (!(staterr & E1000_RXD_STAT_EOP))
1358 adapter->flags2 |= FLAG2_IS_DISCARDING;
1359
1360 if (adapter->flags2 & FLAG2_IS_DISCARDING) {
1361 e_dbg("Packet Split buffers didn't pick up the full packet\n");
1362 dev_kfree_skb_irq(skb);
1363 if (staterr & E1000_RXD_STAT_EOP)
1364 adapter->flags2 &= ~FLAG2_IS_DISCARDING;
1365 goto next_desc;
1366 }
1367
1368 if (unlikely((staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK) &&
1369 !(netdev->features & NETIF_F_RXALL))) {
1370 dev_kfree_skb_irq(skb);
1371 goto next_desc;
1372 }
1373
1374 length = le16_to_cpu(rx_desc->wb.middle.length0);
1375
1376 if (!length) {
1377 e_dbg("Last part of the packet spanning multiple descriptors\n");
1378 dev_kfree_skb_irq(skb);
1379 goto next_desc;
1380 }
1381
1382 /* Good Receive */
1383 skb_put(skb, length);
1384
1385 {
1386 /* this looks ugly, but it seems compiler issues make
1387 * it more efficient than reusing j
1388 */
1389 int l1 = le16_to_cpu(rx_desc->wb.upper.length[0]);
1390
1391 /* page alloc/put takes too long and effects small
1392 * packet throughput, so unsplit small packets and
1393 * save the alloc/put
1394 */
1395 if (l1 && (l1 <= copybreak) &&
1396 ((length + l1) <= adapter->rx_ps_bsize0)) {
1397 ps_page = &buffer_info->ps_pages[0];
1398
1399 dma_sync_single_for_cpu(&pdev->dev,
1400 ps_page->dma,
1401 PAGE_SIZE,
1402 DMA_FROM_DEVICE);
1403 memcpy(skb_tail_pointer(skb),
1404 page_address(ps_page->page), l1);
1405 dma_sync_single_for_device(&pdev->dev,
1406 ps_page->dma,
1407 PAGE_SIZE,
1408 DMA_FROM_DEVICE);
1409
1410 /* remove the CRC */
1411 if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) {
1412 if (!(netdev->features & NETIF_F_RXFCS))
1413 l1 -= 4;
1414 }
1415
1416 skb_put(skb, l1);
1417 goto copydone;
1418 } /* if */
1419 }
1420
1421 for (j = 0; j < PS_PAGE_BUFFERS; j++) {
1422 length = le16_to_cpu(rx_desc->wb.upper.length[j]);
1423 if (!length)
1424 break;
1425
1426 ps_page = &buffer_info->ps_pages[j];
1427 dma_unmap_page(&pdev->dev, ps_page->dma, PAGE_SIZE,
1428 DMA_FROM_DEVICE);
1429 ps_page->dma = 0;
1430 skb_fill_page_desc(skb, j, ps_page->page, 0, length);
1431 ps_page->page = NULL;
1432 skb->len += length;
1433 skb->data_len += length;
1434 skb->truesize += PAGE_SIZE;
1435 }
1436
1437 /* strip the ethernet crc, problem is we're using pages now so
1438 * this whole operation can get a little cpu intensive
1439 */
1440 if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) {
1441 if (!(netdev->features & NETIF_F_RXFCS))
1442 pskb_trim(skb, skb->len - 4);
1443 }
1444
1445copydone:
1446 total_rx_bytes += skb->len;
1447 total_rx_packets++;
1448
1449 e1000_rx_checksum(adapter, staterr, skb);
1450
1451 e1000_rx_hash(netdev, rx_desc->wb.lower.hi_dword.rss, skb);
1452
1453 if (rx_desc->wb.upper.header_status &
1454 cpu_to_le16(E1000_RXDPS_HDRSTAT_HDRSP))
1455 adapter->rx_hdr_split++;
1456
1457 e1000_receive_skb(adapter, netdev, skb, staterr,
1458 rx_desc->wb.middle.vlan);
1459
1460next_desc:
1461 rx_desc->wb.middle.status_error &= cpu_to_le32(~0xFF);
1462 buffer_info->skb = NULL;
1463
1464 /* return some buffers to hardware, one at a time is too slow */
1465 if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
1466 adapter->alloc_rx_buf(rx_ring, cleaned_count,
1467 GFP_ATOMIC);
1468 cleaned_count = 0;
1469 }
1470
1471 /* use prefetched values */
1472 rx_desc = next_rxd;
1473 buffer_info = next_buffer;
1474
1475 staterr = le32_to_cpu(rx_desc->wb.middle.status_error);
1476 }
1477 rx_ring->next_to_clean = i;
1478
1479 cleaned_count = e1000_desc_unused(rx_ring);
1480 if (cleaned_count)
1481 adapter->alloc_rx_buf(rx_ring, cleaned_count, GFP_ATOMIC);
1482
1483 adapter->total_rx_bytes += total_rx_bytes;
1484 adapter->total_rx_packets += total_rx_packets;
1485 return cleaned;
1486}
1487
1488static void e1000_consume_page(struct e1000_buffer *bi, struct sk_buff *skb,
1489 u16 length)
1490{
1491 bi->page = NULL;
1492 skb->len += length;
1493 skb->data_len += length;
1494 skb->truesize += PAGE_SIZE;
1495}
1496
1497/**
1498 * e1000_clean_jumbo_rx_irq - Send received data up the network stack; legacy
1499 * @rx_ring: Rx descriptor ring
1500 * @work_done: output parameter for indicating completed work
1501 * @work_to_do: how many packets we can clean
1502 *
1503 * the return value indicates whether actual cleaning was done, there
1504 * is no guarantee that everything was cleaned
1505 **/
1506static bool e1000_clean_jumbo_rx_irq(struct e1000_ring *rx_ring, int *work_done,
1507 int work_to_do)
1508{
1509 struct e1000_adapter *adapter = rx_ring->adapter;
1510 struct net_device *netdev = adapter->netdev;
1511 struct pci_dev *pdev = adapter->pdev;
1512 union e1000_rx_desc_extended *rx_desc, *next_rxd;
1513 struct e1000_buffer *buffer_info, *next_buffer;
1514 u32 length, staterr;
1515 unsigned int i;
1516 int cleaned_count = 0;
1517 bool cleaned = false;
1518 unsigned int total_rx_bytes = 0, total_rx_packets = 0;
1519 struct skb_shared_info *shinfo;
1520
1521 i = rx_ring->next_to_clean;
1522 rx_desc = E1000_RX_DESC_EXT(*rx_ring, i);
1523 staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
1524 buffer_info = &rx_ring->buffer_info[i];
1525
1526 while (staterr & E1000_RXD_STAT_DD) {
1527 struct sk_buff *skb;
1528
1529 if (*work_done >= work_to_do)
1530 break;
1531 (*work_done)++;
1532 dma_rmb(); /* read descriptor and rx_buffer_info after status DD */
1533
1534 skb = buffer_info->skb;
1535 buffer_info->skb = NULL;
1536
1537 ++i;
1538 if (i == rx_ring->count)
1539 i = 0;
1540 next_rxd = E1000_RX_DESC_EXT(*rx_ring, i);
1541 prefetch(next_rxd);
1542
1543 next_buffer = &rx_ring->buffer_info[i];
1544
1545 cleaned = true;
1546 cleaned_count++;
1547 dma_unmap_page(&pdev->dev, buffer_info->dma, PAGE_SIZE,
1548 DMA_FROM_DEVICE);
1549 buffer_info->dma = 0;
1550
1551 length = le16_to_cpu(rx_desc->wb.upper.length);
1552
1553 /* errors is only valid for DD + EOP descriptors */
1554 if (unlikely((staterr & E1000_RXD_STAT_EOP) &&
1555 ((staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK) &&
1556 !(netdev->features & NETIF_F_RXALL)))) {
1557 /* recycle both page and skb */
1558 buffer_info->skb = skb;
1559 /* an error means any chain goes out the window too */
1560 if (rx_ring->rx_skb_top)
1561 dev_kfree_skb_irq(rx_ring->rx_skb_top);
1562 rx_ring->rx_skb_top = NULL;
1563 goto next_desc;
1564 }
1565#define rxtop (rx_ring->rx_skb_top)
1566 if (!(staterr & E1000_RXD_STAT_EOP)) {
1567 /* this descriptor is only the beginning (or middle) */
1568 if (!rxtop) {
1569 /* this is the beginning of a chain */
1570 rxtop = skb;
1571 skb_fill_page_desc(rxtop, 0, buffer_info->page,
1572 0, length);
1573 } else {
1574 /* this is the middle of a chain */
1575 shinfo = skb_shinfo(rxtop);
1576 skb_fill_page_desc(rxtop, shinfo->nr_frags,
1577 buffer_info->page, 0,
1578 length);
1579 /* re-use the skb, only consumed the page */
1580 buffer_info->skb = skb;
1581 }
1582 e1000_consume_page(buffer_info, rxtop, length);
1583 goto next_desc;
1584 } else {
1585 if (rxtop) {
1586 /* end of the chain */
1587 shinfo = skb_shinfo(rxtop);
1588 skb_fill_page_desc(rxtop, shinfo->nr_frags,
1589 buffer_info->page, 0,
1590 length);
1591 /* re-use the current skb, we only consumed the
1592 * page
1593 */
1594 buffer_info->skb = skb;
1595 skb = rxtop;
1596 rxtop = NULL;
1597 e1000_consume_page(buffer_info, skb, length);
1598 } else {
1599 /* no chain, got EOP, this buf is the packet
1600 * copybreak to save the put_page/alloc_page
1601 */
1602 if (length <= copybreak &&
1603 skb_tailroom(skb) >= length) {
1604 memcpy(skb_tail_pointer(skb),
1605 page_address(buffer_info->page),
1606 length);
1607 /* re-use the page, so don't erase
1608 * buffer_info->page
1609 */
1610 skb_put(skb, length);
1611 } else {
1612 skb_fill_page_desc(skb, 0,
1613 buffer_info->page, 0,
1614 length);
1615 e1000_consume_page(buffer_info, skb,
1616 length);
1617 }
1618 }
1619 }
1620
1621 /* Receive Checksum Offload */
1622 e1000_rx_checksum(adapter, staterr, skb);
1623
1624 e1000_rx_hash(netdev, rx_desc->wb.lower.hi_dword.rss, skb);
1625
1626 /* probably a little skewed due to removing CRC */
1627 total_rx_bytes += skb->len;
1628 total_rx_packets++;
1629
1630 /* eth type trans needs skb->data to point to something */
1631 if (!pskb_may_pull(skb, ETH_HLEN)) {
1632 e_err("pskb_may_pull failed.\n");
1633 dev_kfree_skb_irq(skb);
1634 goto next_desc;
1635 }
1636
1637 e1000_receive_skb(adapter, netdev, skb, staterr,
1638 rx_desc->wb.upper.vlan);
1639
1640next_desc:
1641 rx_desc->wb.upper.status_error &= cpu_to_le32(~0xFF);
1642
1643 /* return some buffers to hardware, one at a time is too slow */
1644 if (unlikely(cleaned_count >= E1000_RX_BUFFER_WRITE)) {
1645 adapter->alloc_rx_buf(rx_ring, cleaned_count,
1646 GFP_ATOMIC);
1647 cleaned_count = 0;
1648 }
1649
1650 /* use prefetched values */
1651 rx_desc = next_rxd;
1652 buffer_info = next_buffer;
1653
1654 staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
1655 }
1656 rx_ring->next_to_clean = i;
1657
1658 cleaned_count = e1000_desc_unused(rx_ring);
1659 if (cleaned_count)
1660 adapter->alloc_rx_buf(rx_ring, cleaned_count, GFP_ATOMIC);
1661
1662 adapter->total_rx_bytes += total_rx_bytes;
1663 adapter->total_rx_packets += total_rx_packets;
1664 return cleaned;
1665}
1666
1667/**
1668 * e1000_clean_rx_ring - Free Rx Buffers per Queue
1669 * @rx_ring: Rx descriptor ring
1670 **/
1671static void e1000_clean_rx_ring(struct e1000_ring *rx_ring)
1672{
1673 struct e1000_adapter *adapter = rx_ring->adapter;
1674 struct e1000_buffer *buffer_info;
1675 struct e1000_ps_page *ps_page;
1676 struct pci_dev *pdev = adapter->pdev;
1677 unsigned int i, j;
1678
1679 /* Free all the Rx ring sk_buffs */
1680 for (i = 0; i < rx_ring->count; i++) {
1681 buffer_info = &rx_ring->buffer_info[i];
1682 if (buffer_info->dma) {
1683 if (adapter->clean_rx == e1000_clean_rx_irq)
1684 dma_unmap_single(&pdev->dev, buffer_info->dma,
1685 adapter->rx_buffer_len,
1686 DMA_FROM_DEVICE);
1687 else if (adapter->clean_rx == e1000_clean_jumbo_rx_irq)
1688 dma_unmap_page(&pdev->dev, buffer_info->dma,
1689 PAGE_SIZE, DMA_FROM_DEVICE);
1690 else if (adapter->clean_rx == e1000_clean_rx_irq_ps)
1691 dma_unmap_single(&pdev->dev, buffer_info->dma,
1692 adapter->rx_ps_bsize0,
1693 DMA_FROM_DEVICE);
1694 buffer_info->dma = 0;
1695 }
1696
1697 if (buffer_info->page) {
1698 put_page(buffer_info->page);
1699 buffer_info->page = NULL;
1700 }
1701
1702 if (buffer_info->skb) {
1703 dev_kfree_skb(buffer_info->skb);
1704 buffer_info->skb = NULL;
1705 }
1706
1707 for (j = 0; j < PS_PAGE_BUFFERS; j++) {
1708 ps_page = &buffer_info->ps_pages[j];
1709 if (!ps_page->page)
1710 break;
1711 dma_unmap_page(&pdev->dev, ps_page->dma, PAGE_SIZE,
1712 DMA_FROM_DEVICE);
1713 ps_page->dma = 0;
1714 put_page(ps_page->page);
1715 ps_page->page = NULL;
1716 }
1717 }
1718
1719 /* there also may be some cached data from a chained receive */
1720 if (rx_ring->rx_skb_top) {
1721 dev_kfree_skb(rx_ring->rx_skb_top);
1722 rx_ring->rx_skb_top = NULL;
1723 }
1724
1725 /* Zero out the descriptor ring */
1726 memset(rx_ring->desc, 0, rx_ring->size);
1727
1728 rx_ring->next_to_clean = 0;
1729 rx_ring->next_to_use = 0;
1730 adapter->flags2 &= ~FLAG2_IS_DISCARDING;
1731}
1732
1733static void e1000e_downshift_workaround(struct work_struct *work)
1734{
1735 struct e1000_adapter *adapter = container_of(work,
1736 struct e1000_adapter,
1737 downshift_task);
1738
1739 if (test_bit(__E1000_DOWN, &adapter->state))
1740 return;
1741
1742 e1000e_gig_downshift_workaround_ich8lan(&adapter->hw);
1743}
1744
1745/**
1746 * e1000_intr_msi - Interrupt Handler
1747 * @irq: interrupt number
1748 * @data: pointer to a network interface device structure
1749 **/
1750static irqreturn_t e1000_intr_msi(int __always_unused irq, void *data)
1751{
1752 struct net_device *netdev = data;
1753 struct e1000_adapter *adapter = netdev_priv(netdev);
1754 struct e1000_hw *hw = &adapter->hw;
1755 u32 icr = er32(ICR);
1756
1757 /* read ICR disables interrupts using IAM */
1758 if (icr & E1000_ICR_LSC) {
1759 hw->mac.get_link_status = true;
1760 /* ICH8 workaround-- Call gig speed drop workaround on cable
1761 * disconnect (LSC) before accessing any PHY registers
1762 */
1763 if ((adapter->flags & FLAG_LSC_GIG_SPEED_DROP) &&
1764 (!(er32(STATUS) & E1000_STATUS_LU)))
1765 schedule_work(&adapter->downshift_task);
1766
1767 /* 80003ES2LAN workaround-- For packet buffer work-around on
1768 * link down event; disable receives here in the ISR and reset
1769 * adapter in watchdog
1770 */
1771 if (netif_carrier_ok(netdev) &&
1772 adapter->flags & FLAG_RX_NEEDS_RESTART) {
1773 /* disable receives */
1774 u32 rctl = er32(RCTL);
1775
1776 ew32(RCTL, rctl & ~E1000_RCTL_EN);
1777 adapter->flags |= FLAG_RESTART_NOW;
1778 }
1779 /* guard against interrupt when we're going down */
1780 if (!test_bit(__E1000_DOWN, &adapter->state))
1781 mod_timer(&adapter->watchdog_timer, jiffies + 1);
1782 }
1783
1784 /* Reset on uncorrectable ECC error */
1785 if ((icr & E1000_ICR_ECCER) && (hw->mac.type >= e1000_pch_lpt)) {
1786 u32 pbeccsts = er32(PBECCSTS);
1787
1788 adapter->corr_errors +=
1789 pbeccsts & E1000_PBECCSTS_CORR_ERR_CNT_MASK;
1790 adapter->uncorr_errors +=
1791 FIELD_GET(E1000_PBECCSTS_UNCORR_ERR_CNT_MASK, pbeccsts);
1792
1793 /* Do the reset outside of interrupt context */
1794 schedule_work(&adapter->reset_task);
1795
1796 /* return immediately since reset is imminent */
1797 return IRQ_HANDLED;
1798 }
1799
1800 if (napi_schedule_prep(&adapter->napi)) {
1801 adapter->total_tx_bytes = 0;
1802 adapter->total_tx_packets = 0;
1803 adapter->total_rx_bytes = 0;
1804 adapter->total_rx_packets = 0;
1805 __napi_schedule(&adapter->napi);
1806 }
1807
1808 return IRQ_HANDLED;
1809}
1810
1811/**
1812 * e1000_intr - Interrupt Handler
1813 * @irq: interrupt number
1814 * @data: pointer to a network interface device structure
1815 **/
1816static irqreturn_t e1000_intr(int __always_unused irq, void *data)
1817{
1818 struct net_device *netdev = data;
1819 struct e1000_adapter *adapter = netdev_priv(netdev);
1820 struct e1000_hw *hw = &adapter->hw;
1821 u32 rctl, icr = er32(ICR);
1822
1823 if (!icr || test_bit(__E1000_DOWN, &adapter->state))
1824 return IRQ_NONE; /* Not our interrupt */
1825
1826 /* IMS will not auto-mask if INT_ASSERTED is not set, and if it is
1827 * not set, then the adapter didn't send an interrupt
1828 */
1829 if (!(icr & E1000_ICR_INT_ASSERTED))
1830 return IRQ_NONE;
1831
1832 /* Interrupt Auto-Mask...upon reading ICR,
1833 * interrupts are masked. No need for the
1834 * IMC write
1835 */
1836
1837 if (icr & E1000_ICR_LSC) {
1838 hw->mac.get_link_status = true;
1839 /* ICH8 workaround-- Call gig speed drop workaround on cable
1840 * disconnect (LSC) before accessing any PHY registers
1841 */
1842 if ((adapter->flags & FLAG_LSC_GIG_SPEED_DROP) &&
1843 (!(er32(STATUS) & E1000_STATUS_LU)))
1844 schedule_work(&adapter->downshift_task);
1845
1846 /* 80003ES2LAN workaround--
1847 * For packet buffer work-around on link down event;
1848 * disable receives here in the ISR and
1849 * reset adapter in watchdog
1850 */
1851 if (netif_carrier_ok(netdev) &&
1852 (adapter->flags & FLAG_RX_NEEDS_RESTART)) {
1853 /* disable receives */
1854 rctl = er32(RCTL);
1855 ew32(RCTL, rctl & ~E1000_RCTL_EN);
1856 adapter->flags |= FLAG_RESTART_NOW;
1857 }
1858 /* guard against interrupt when we're going down */
1859 if (!test_bit(__E1000_DOWN, &adapter->state))
1860 mod_timer(&adapter->watchdog_timer, jiffies + 1);
1861 }
1862
1863 /* Reset on uncorrectable ECC error */
1864 if ((icr & E1000_ICR_ECCER) && (hw->mac.type >= e1000_pch_lpt)) {
1865 u32 pbeccsts = er32(PBECCSTS);
1866
1867 adapter->corr_errors +=
1868 pbeccsts & E1000_PBECCSTS_CORR_ERR_CNT_MASK;
1869 adapter->uncorr_errors +=
1870 FIELD_GET(E1000_PBECCSTS_UNCORR_ERR_CNT_MASK, pbeccsts);
1871
1872 /* Do the reset outside of interrupt context */
1873 schedule_work(&adapter->reset_task);
1874
1875 /* return immediately since reset is imminent */
1876 return IRQ_HANDLED;
1877 }
1878
1879 if (napi_schedule_prep(&adapter->napi)) {
1880 adapter->total_tx_bytes = 0;
1881 adapter->total_tx_packets = 0;
1882 adapter->total_rx_bytes = 0;
1883 adapter->total_rx_packets = 0;
1884 __napi_schedule(&adapter->napi);
1885 }
1886
1887 return IRQ_HANDLED;
1888}
1889
1890static irqreturn_t e1000_msix_other(int __always_unused irq, void *data)
1891{
1892 struct net_device *netdev = data;
1893 struct e1000_adapter *adapter = netdev_priv(netdev);
1894 struct e1000_hw *hw = &adapter->hw;
1895 u32 icr = er32(ICR);
1896
1897 if (icr & adapter->eiac_mask)
1898 ew32(ICS, (icr & adapter->eiac_mask));
1899
1900 if (icr & E1000_ICR_LSC) {
1901 hw->mac.get_link_status = true;
1902 /* guard against interrupt when we're going down */
1903 if (!test_bit(__E1000_DOWN, &adapter->state))
1904 mod_timer(&adapter->watchdog_timer, jiffies + 1);
1905 }
1906
1907 if (!test_bit(__E1000_DOWN, &adapter->state))
1908 ew32(IMS, E1000_IMS_OTHER | IMS_OTHER_MASK);
1909
1910 return IRQ_HANDLED;
1911}
1912
1913static irqreturn_t e1000_intr_msix_tx(int __always_unused irq, void *data)
1914{
1915 struct net_device *netdev = data;
1916 struct e1000_adapter *adapter = netdev_priv(netdev);
1917 struct e1000_hw *hw = &adapter->hw;
1918 struct e1000_ring *tx_ring = adapter->tx_ring;
1919
1920 adapter->total_tx_bytes = 0;
1921 adapter->total_tx_packets = 0;
1922
1923 if (!e1000_clean_tx_irq(tx_ring))
1924 /* Ring was not completely cleaned, so fire another interrupt */
1925 ew32(ICS, tx_ring->ims_val);
1926
1927 if (!test_bit(__E1000_DOWN, &adapter->state))
1928 ew32(IMS, adapter->tx_ring->ims_val);
1929
1930 return IRQ_HANDLED;
1931}
1932
1933static irqreturn_t e1000_intr_msix_rx(int __always_unused irq, void *data)
1934{
1935 struct net_device *netdev = data;
1936 struct e1000_adapter *adapter = netdev_priv(netdev);
1937 struct e1000_ring *rx_ring = adapter->rx_ring;
1938
1939 /* Write the ITR value calculated at the end of the
1940 * previous interrupt.
1941 */
1942 if (rx_ring->set_itr) {
1943 u32 itr = rx_ring->itr_val ?
1944 1000000000 / (rx_ring->itr_val * 256) : 0;
1945
1946 writel(itr, rx_ring->itr_register);
1947 rx_ring->set_itr = 0;
1948 }
1949
1950 if (napi_schedule_prep(&adapter->napi)) {
1951 adapter->total_rx_bytes = 0;
1952 adapter->total_rx_packets = 0;
1953 __napi_schedule(&adapter->napi);
1954 }
1955 return IRQ_HANDLED;
1956}
1957
1958/**
1959 * e1000_configure_msix - Configure MSI-X hardware
1960 * @adapter: board private structure
1961 *
1962 * e1000_configure_msix sets up the hardware to properly
1963 * generate MSI-X interrupts.
1964 **/
1965static void e1000_configure_msix(struct e1000_adapter *adapter)
1966{
1967 struct e1000_hw *hw = &adapter->hw;
1968 struct e1000_ring *rx_ring = adapter->rx_ring;
1969 struct e1000_ring *tx_ring = adapter->tx_ring;
1970 int vector = 0;
1971 u32 ctrl_ext, ivar = 0;
1972
1973 adapter->eiac_mask = 0;
1974
1975 /* Workaround issue with spurious interrupts on 82574 in MSI-X mode */
1976 if (hw->mac.type == e1000_82574) {
1977 u32 rfctl = er32(RFCTL);
1978
1979 rfctl |= E1000_RFCTL_ACK_DIS;
1980 ew32(RFCTL, rfctl);
1981 }
1982
1983 /* Configure Rx vector */
1984 rx_ring->ims_val = E1000_IMS_RXQ0;
1985 adapter->eiac_mask |= rx_ring->ims_val;
1986 if (rx_ring->itr_val)
1987 writel(1000000000 / (rx_ring->itr_val * 256),
1988 rx_ring->itr_register);
1989 else
1990 writel(1, rx_ring->itr_register);
1991 ivar = E1000_IVAR_INT_ALLOC_VALID | vector;
1992
1993 /* Configure Tx vector */
1994 tx_ring->ims_val = E1000_IMS_TXQ0;
1995 vector++;
1996 if (tx_ring->itr_val)
1997 writel(1000000000 / (tx_ring->itr_val * 256),
1998 tx_ring->itr_register);
1999 else
2000 writel(1, tx_ring->itr_register);
2001 adapter->eiac_mask |= tx_ring->ims_val;
2002 ivar |= ((E1000_IVAR_INT_ALLOC_VALID | vector) << 8);
2003
2004 /* set vector for Other Causes, e.g. link changes */
2005 vector++;
2006 ivar |= ((E1000_IVAR_INT_ALLOC_VALID | vector) << 16);
2007 if (rx_ring->itr_val)
2008 writel(1000000000 / (rx_ring->itr_val * 256),
2009 hw->hw_addr + E1000_EITR_82574(vector));
2010 else
2011 writel(1, hw->hw_addr + E1000_EITR_82574(vector));
2012
2013 /* Cause Tx interrupts on every write back */
2014 ivar |= BIT(31);
2015
2016 ew32(IVAR, ivar);
2017
2018 /* enable MSI-X PBA support */
2019 ctrl_ext = er32(CTRL_EXT) & ~E1000_CTRL_EXT_IAME;
2020 ctrl_ext |= E1000_CTRL_EXT_PBA_CLR | E1000_CTRL_EXT_EIAME;
2021 ew32(CTRL_EXT, ctrl_ext);
2022 e1e_flush();
2023}
2024
2025void e1000e_reset_interrupt_capability(struct e1000_adapter *adapter)
2026{
2027 if (adapter->msix_entries) {
2028 pci_disable_msix(adapter->pdev);
2029 kfree(adapter->msix_entries);
2030 adapter->msix_entries = NULL;
2031 } else if (adapter->flags & FLAG_MSI_ENABLED) {
2032 pci_disable_msi(adapter->pdev);
2033 adapter->flags &= ~FLAG_MSI_ENABLED;
2034 }
2035}
2036
2037/**
2038 * e1000e_set_interrupt_capability - set MSI or MSI-X if supported
2039 * @adapter: board private structure
2040 *
2041 * Attempt to configure interrupts using the best available
2042 * capabilities of the hardware and kernel.
2043 **/
2044void e1000e_set_interrupt_capability(struct e1000_adapter *adapter)
2045{
2046 int err;
2047 int i;
2048
2049 switch (adapter->int_mode) {
2050 case E1000E_INT_MODE_MSIX:
2051 if (adapter->flags & FLAG_HAS_MSIX) {
2052 adapter->num_vectors = 3; /* RxQ0, TxQ0 and other */
2053 adapter->msix_entries = kcalloc(adapter->num_vectors,
2054 sizeof(struct
2055 msix_entry),
2056 GFP_KERNEL);
2057 if (adapter->msix_entries) {
2058 struct e1000_adapter *a = adapter;
2059
2060 for (i = 0; i < adapter->num_vectors; i++)
2061 adapter->msix_entries[i].entry = i;
2062
2063 err = pci_enable_msix_range(a->pdev,
2064 a->msix_entries,
2065 a->num_vectors,
2066 a->num_vectors);
2067 if (err > 0)
2068 return;
2069 }
2070 /* MSI-X failed, so fall through and try MSI */
2071 e_err("Failed to initialize MSI-X interrupts. Falling back to MSI interrupts.\n");
2072 e1000e_reset_interrupt_capability(adapter);
2073 }
2074 adapter->int_mode = E1000E_INT_MODE_MSI;
2075 fallthrough;
2076 case E1000E_INT_MODE_MSI:
2077 if (!pci_enable_msi(adapter->pdev)) {
2078 adapter->flags |= FLAG_MSI_ENABLED;
2079 } else {
2080 adapter->int_mode = E1000E_INT_MODE_LEGACY;
2081 e_err("Failed to initialize MSI interrupts. Falling back to legacy interrupts.\n");
2082 }
2083 fallthrough;
2084 case E1000E_INT_MODE_LEGACY:
2085 /* Don't do anything; this is the system default */
2086 break;
2087 }
2088
2089 /* store the number of vectors being used */
2090 adapter->num_vectors = 1;
2091}
2092
2093/**
2094 * e1000_request_msix - Initialize MSI-X interrupts
2095 * @adapter: board private structure
2096 *
2097 * e1000_request_msix allocates MSI-X vectors and requests interrupts from the
2098 * kernel.
2099 **/
2100static int e1000_request_msix(struct e1000_adapter *adapter)
2101{
2102 struct net_device *netdev = adapter->netdev;
2103 int err = 0, vector = 0;
2104
2105 if (strlen(netdev->name) < (IFNAMSIZ - 5))
2106 snprintf(adapter->rx_ring->name,
2107 sizeof(adapter->rx_ring->name) - 1,
2108 "%.14s-rx-0", netdev->name);
2109 else
2110 memcpy(adapter->rx_ring->name, netdev->name, IFNAMSIZ);
2111 err = request_irq(adapter->msix_entries[vector].vector,
2112 e1000_intr_msix_rx, 0, adapter->rx_ring->name,
2113 netdev);
2114 if (err)
2115 return err;
2116 adapter->rx_ring->itr_register = adapter->hw.hw_addr +
2117 E1000_EITR_82574(vector);
2118 adapter->rx_ring->itr_val = adapter->itr;
2119 vector++;
2120
2121 if (strlen(netdev->name) < (IFNAMSIZ - 5))
2122 snprintf(adapter->tx_ring->name,
2123 sizeof(adapter->tx_ring->name) - 1,
2124 "%.14s-tx-0", netdev->name);
2125 else
2126 memcpy(adapter->tx_ring->name, netdev->name, IFNAMSIZ);
2127 err = request_irq(adapter->msix_entries[vector].vector,
2128 e1000_intr_msix_tx, 0, adapter->tx_ring->name,
2129 netdev);
2130 if (err)
2131 return err;
2132 adapter->tx_ring->itr_register = adapter->hw.hw_addr +
2133 E1000_EITR_82574(vector);
2134 adapter->tx_ring->itr_val = adapter->itr;
2135 vector++;
2136
2137 err = request_irq(adapter->msix_entries[vector].vector,
2138 e1000_msix_other, 0, netdev->name, netdev);
2139 if (err)
2140 return err;
2141
2142 e1000_configure_msix(adapter);
2143
2144 return 0;
2145}
2146
2147/**
2148 * e1000_request_irq - initialize interrupts
2149 * @adapter: board private structure
2150 *
2151 * Attempts to configure interrupts using the best available
2152 * capabilities of the hardware and kernel.
2153 **/
2154static int e1000_request_irq(struct e1000_adapter *adapter)
2155{
2156 struct net_device *netdev = adapter->netdev;
2157 int err;
2158
2159 if (adapter->msix_entries) {
2160 err = e1000_request_msix(adapter);
2161 if (!err)
2162 return err;
2163 /* fall back to MSI */
2164 e1000e_reset_interrupt_capability(adapter);
2165 adapter->int_mode = E1000E_INT_MODE_MSI;
2166 e1000e_set_interrupt_capability(adapter);
2167 }
2168 if (adapter->flags & FLAG_MSI_ENABLED) {
2169 err = request_irq(adapter->pdev->irq, e1000_intr_msi, 0,
2170 netdev->name, netdev);
2171 if (!err)
2172 return err;
2173
2174 /* fall back to legacy interrupt */
2175 e1000e_reset_interrupt_capability(adapter);
2176 adapter->int_mode = E1000E_INT_MODE_LEGACY;
2177 }
2178
2179 err = request_irq(adapter->pdev->irq, e1000_intr, IRQF_SHARED,
2180 netdev->name, netdev);
2181 if (err)
2182 e_err("Unable to allocate interrupt, Error: %d\n", err);
2183
2184 return err;
2185}
2186
2187static void e1000_free_irq(struct e1000_adapter *adapter)
2188{
2189 struct net_device *netdev = adapter->netdev;
2190
2191 if (adapter->msix_entries) {
2192 int vector = 0;
2193
2194 free_irq(adapter->msix_entries[vector].vector, netdev);
2195 vector++;
2196
2197 free_irq(adapter->msix_entries[vector].vector, netdev);
2198 vector++;
2199
2200 /* Other Causes interrupt vector */
2201 free_irq(adapter->msix_entries[vector].vector, netdev);
2202 return;
2203 }
2204
2205 free_irq(adapter->pdev->irq, netdev);
2206}
2207
2208/**
2209 * e1000_irq_disable - Mask off interrupt generation on the NIC
2210 * @adapter: board private structure
2211 **/
2212static void e1000_irq_disable(struct e1000_adapter *adapter)
2213{
2214 struct e1000_hw *hw = &adapter->hw;
2215
2216 ew32(IMC, ~0);
2217 if (adapter->msix_entries)
2218 ew32(EIAC_82574, 0);
2219 e1e_flush();
2220
2221 if (adapter->msix_entries) {
2222 int i;
2223
2224 for (i = 0; i < adapter->num_vectors; i++)
2225 synchronize_irq(adapter->msix_entries[i].vector);
2226 } else {
2227 synchronize_irq(adapter->pdev->irq);
2228 }
2229}
2230
2231/**
2232 * e1000_irq_enable - Enable default interrupt generation settings
2233 * @adapter: board private structure
2234 **/
2235static void e1000_irq_enable(struct e1000_adapter *adapter)
2236{
2237 struct e1000_hw *hw = &adapter->hw;
2238
2239 if (adapter->msix_entries) {
2240 ew32(EIAC_82574, adapter->eiac_mask & E1000_EIAC_MASK_82574);
2241 ew32(IMS, adapter->eiac_mask | E1000_IMS_OTHER |
2242 IMS_OTHER_MASK);
2243 } else if (hw->mac.type >= e1000_pch_lpt) {
2244 ew32(IMS, IMS_ENABLE_MASK | E1000_IMS_ECCER);
2245 } else {
2246 ew32(IMS, IMS_ENABLE_MASK);
2247 }
2248 e1e_flush();
2249}
2250
2251/**
2252 * e1000e_get_hw_control - get control of the h/w from f/w
2253 * @adapter: address of board private structure
2254 *
2255 * e1000e_get_hw_control sets {CTRL_EXT|SWSM}:DRV_LOAD bit.
2256 * For ASF and Pass Through versions of f/w this means that
2257 * the driver is loaded. For AMT version (only with 82573)
2258 * of the f/w this means that the network i/f is open.
2259 **/
2260void e1000e_get_hw_control(struct e1000_adapter *adapter)
2261{
2262 struct e1000_hw *hw = &adapter->hw;
2263 u32 ctrl_ext;
2264 u32 swsm;
2265
2266 /* Let firmware know the driver has taken over */
2267 if (adapter->flags & FLAG_HAS_SWSM_ON_LOAD) {
2268 swsm = er32(SWSM);
2269 ew32(SWSM, swsm | E1000_SWSM_DRV_LOAD);
2270 } else if (adapter->flags & FLAG_HAS_CTRLEXT_ON_LOAD) {
2271 ctrl_ext = er32(CTRL_EXT);
2272 ew32(CTRL_EXT, ctrl_ext | E1000_CTRL_EXT_DRV_LOAD);
2273 }
2274}
2275
2276/**
2277 * e1000e_release_hw_control - release control of the h/w to f/w
2278 * @adapter: address of board private structure
2279 *
2280 * e1000e_release_hw_control resets {CTRL_EXT|SWSM}:DRV_LOAD bit.
2281 * For ASF and Pass Through versions of f/w this means that the
2282 * driver is no longer loaded. For AMT version (only with 82573) i
2283 * of the f/w this means that the network i/f is closed.
2284 *
2285 **/
2286void e1000e_release_hw_control(struct e1000_adapter *adapter)
2287{
2288 struct e1000_hw *hw = &adapter->hw;
2289 u32 ctrl_ext;
2290 u32 swsm;
2291
2292 /* Let firmware taken over control of h/w */
2293 if (adapter->flags & FLAG_HAS_SWSM_ON_LOAD) {
2294 swsm = er32(SWSM);
2295 ew32(SWSM, swsm & ~E1000_SWSM_DRV_LOAD);
2296 } else if (adapter->flags & FLAG_HAS_CTRLEXT_ON_LOAD) {
2297 ctrl_ext = er32(CTRL_EXT);
2298 ew32(CTRL_EXT, ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD);
2299 }
2300}
2301
2302/**
2303 * e1000_alloc_ring_dma - allocate memory for a ring structure
2304 * @adapter: board private structure
2305 * @ring: ring struct for which to allocate dma
2306 **/
2307static int e1000_alloc_ring_dma(struct e1000_adapter *adapter,
2308 struct e1000_ring *ring)
2309{
2310 struct pci_dev *pdev = adapter->pdev;
2311
2312 ring->desc = dma_alloc_coherent(&pdev->dev, ring->size, &ring->dma,
2313 GFP_KERNEL);
2314 if (!ring->desc)
2315 return -ENOMEM;
2316
2317 return 0;
2318}
2319
2320/**
2321 * e1000e_setup_tx_resources - allocate Tx resources (Descriptors)
2322 * @tx_ring: Tx descriptor ring
2323 *
2324 * Return 0 on success, negative on failure
2325 **/
2326int e1000e_setup_tx_resources(struct e1000_ring *tx_ring)
2327{
2328 struct e1000_adapter *adapter = tx_ring->adapter;
2329 int err = -ENOMEM, size;
2330
2331 size = sizeof(struct e1000_buffer) * tx_ring->count;
2332 tx_ring->buffer_info = vzalloc(size);
2333 if (!tx_ring->buffer_info)
2334 goto err;
2335
2336 /* round up to nearest 4K */
2337 tx_ring->size = tx_ring->count * sizeof(struct e1000_tx_desc);
2338 tx_ring->size = ALIGN(tx_ring->size, 4096);
2339
2340 err = e1000_alloc_ring_dma(adapter, tx_ring);
2341 if (err)
2342 goto err;
2343
2344 tx_ring->next_to_use = 0;
2345 tx_ring->next_to_clean = 0;
2346
2347 return 0;
2348err:
2349 vfree(tx_ring->buffer_info);
2350 e_err("Unable to allocate memory for the transmit descriptor ring\n");
2351 return err;
2352}
2353
2354/**
2355 * e1000e_setup_rx_resources - allocate Rx resources (Descriptors)
2356 * @rx_ring: Rx descriptor ring
2357 *
2358 * Returns 0 on success, negative on failure
2359 **/
2360int e1000e_setup_rx_resources(struct e1000_ring *rx_ring)
2361{
2362 struct e1000_adapter *adapter = rx_ring->adapter;
2363 struct e1000_buffer *buffer_info;
2364 int i, size, desc_len, err = -ENOMEM;
2365
2366 size = sizeof(struct e1000_buffer) * rx_ring->count;
2367 rx_ring->buffer_info = vzalloc(size);
2368 if (!rx_ring->buffer_info)
2369 goto err;
2370
2371 for (i = 0; i < rx_ring->count; i++) {
2372 buffer_info = &rx_ring->buffer_info[i];
2373 buffer_info->ps_pages = kcalloc(PS_PAGE_BUFFERS,
2374 sizeof(struct e1000_ps_page),
2375 GFP_KERNEL);
2376 if (!buffer_info->ps_pages)
2377 goto err_pages;
2378 }
2379
2380 desc_len = sizeof(union e1000_rx_desc_packet_split);
2381
2382 /* Round up to nearest 4K */
2383 rx_ring->size = rx_ring->count * desc_len;
2384 rx_ring->size = ALIGN(rx_ring->size, 4096);
2385
2386 err = e1000_alloc_ring_dma(adapter, rx_ring);
2387 if (err)
2388 goto err_pages;
2389
2390 rx_ring->next_to_clean = 0;
2391 rx_ring->next_to_use = 0;
2392 rx_ring->rx_skb_top = NULL;
2393
2394 return 0;
2395
2396err_pages:
2397 for (i = 0; i < rx_ring->count; i++) {
2398 buffer_info = &rx_ring->buffer_info[i];
2399 kfree(buffer_info->ps_pages);
2400 }
2401err:
2402 vfree(rx_ring->buffer_info);
2403 e_err("Unable to allocate memory for the receive descriptor ring\n");
2404 return err;
2405}
2406
2407/**
2408 * e1000_clean_tx_ring - Free Tx Buffers
2409 * @tx_ring: Tx descriptor ring
2410 **/
2411static void e1000_clean_tx_ring(struct e1000_ring *tx_ring)
2412{
2413 struct e1000_adapter *adapter = tx_ring->adapter;
2414 struct e1000_buffer *buffer_info;
2415 unsigned long size;
2416 unsigned int i;
2417
2418 for (i = 0; i < tx_ring->count; i++) {
2419 buffer_info = &tx_ring->buffer_info[i];
2420 e1000_put_txbuf(tx_ring, buffer_info, false);
2421 }
2422
2423 netdev_reset_queue(adapter->netdev);
2424 size = sizeof(struct e1000_buffer) * tx_ring->count;
2425 memset(tx_ring->buffer_info, 0, size);
2426
2427 memset(tx_ring->desc, 0, tx_ring->size);
2428
2429 tx_ring->next_to_use = 0;
2430 tx_ring->next_to_clean = 0;
2431}
2432
2433/**
2434 * e1000e_free_tx_resources - Free Tx Resources per Queue
2435 * @tx_ring: Tx descriptor ring
2436 *
2437 * Free all transmit software resources
2438 **/
2439void e1000e_free_tx_resources(struct e1000_ring *tx_ring)
2440{
2441 struct e1000_adapter *adapter = tx_ring->adapter;
2442 struct pci_dev *pdev = adapter->pdev;
2443
2444 e1000_clean_tx_ring(tx_ring);
2445
2446 vfree(tx_ring->buffer_info);
2447 tx_ring->buffer_info = NULL;
2448
2449 dma_free_coherent(&pdev->dev, tx_ring->size, tx_ring->desc,
2450 tx_ring->dma);
2451 tx_ring->desc = NULL;
2452}
2453
2454/**
2455 * e1000e_free_rx_resources - Free Rx Resources
2456 * @rx_ring: Rx descriptor ring
2457 *
2458 * Free all receive software resources
2459 **/
2460void e1000e_free_rx_resources(struct e1000_ring *rx_ring)
2461{
2462 struct e1000_adapter *adapter = rx_ring->adapter;
2463 struct pci_dev *pdev = adapter->pdev;
2464 int i;
2465
2466 e1000_clean_rx_ring(rx_ring);
2467
2468 for (i = 0; i < rx_ring->count; i++)
2469 kfree(rx_ring->buffer_info[i].ps_pages);
2470
2471 vfree(rx_ring->buffer_info);
2472 rx_ring->buffer_info = NULL;
2473
2474 dma_free_coherent(&pdev->dev, rx_ring->size, rx_ring->desc,
2475 rx_ring->dma);
2476 rx_ring->desc = NULL;
2477}
2478
2479/**
2480 * e1000_update_itr - update the dynamic ITR value based on statistics
2481 * @itr_setting: current adapter->itr
2482 * @packets: the number of packets during this measurement interval
2483 * @bytes: the number of bytes during this measurement interval
2484 *
2485 * Stores a new ITR value based on packets and byte
2486 * counts during the last interrupt. The advantage of per interrupt
2487 * computation is faster updates and more accurate ITR for the current
2488 * traffic pattern. Constants in this function were computed
2489 * based on theoretical maximum wire speed and thresholds were set based
2490 * on testing data as well as attempting to minimize response time
2491 * while increasing bulk throughput. This functionality is controlled
2492 * by the InterruptThrottleRate module parameter.
2493 **/
2494static unsigned int e1000_update_itr(u16 itr_setting, int packets, int bytes)
2495{
2496 unsigned int retval = itr_setting;
2497
2498 if (packets == 0)
2499 return itr_setting;
2500
2501 switch (itr_setting) {
2502 case lowest_latency:
2503 /* handle TSO and jumbo frames */
2504 if (bytes / packets > 8000)
2505 retval = bulk_latency;
2506 else if ((packets < 5) && (bytes > 512))
2507 retval = low_latency;
2508 break;
2509 case low_latency: /* 50 usec aka 20000 ints/s */
2510 if (bytes > 10000) {
2511 /* this if handles the TSO accounting */
2512 if (bytes / packets > 8000)
2513 retval = bulk_latency;
2514 else if ((packets < 10) || ((bytes / packets) > 1200))
2515 retval = bulk_latency;
2516 else if ((packets > 35))
2517 retval = lowest_latency;
2518 } else if (bytes / packets > 2000) {
2519 retval = bulk_latency;
2520 } else if (packets <= 2 && bytes < 512) {
2521 retval = lowest_latency;
2522 }
2523 break;
2524 case bulk_latency: /* 250 usec aka 4000 ints/s */
2525 if (bytes > 25000) {
2526 if (packets > 35)
2527 retval = low_latency;
2528 } else if (bytes < 6000) {
2529 retval = low_latency;
2530 }
2531 break;
2532 }
2533
2534 return retval;
2535}
2536
2537static void e1000_set_itr(struct e1000_adapter *adapter)
2538{
2539 u16 current_itr;
2540 u32 new_itr = adapter->itr;
2541
2542 /* for non-gigabit speeds, just fix the interrupt rate at 4000 */
2543 if (adapter->link_speed != SPEED_1000) {
2544 new_itr = 4000;
2545 goto set_itr_now;
2546 }
2547
2548 if (adapter->flags2 & FLAG2_DISABLE_AIM) {
2549 new_itr = 0;
2550 goto set_itr_now;
2551 }
2552
2553 adapter->tx_itr = e1000_update_itr(adapter->tx_itr,
2554 adapter->total_tx_packets,
2555 adapter->total_tx_bytes);
2556 /* conservative mode (itr 3) eliminates the lowest_latency setting */
2557 if (adapter->itr_setting == 3 && adapter->tx_itr == lowest_latency)
2558 adapter->tx_itr = low_latency;
2559
2560 adapter->rx_itr = e1000_update_itr(adapter->rx_itr,
2561 adapter->total_rx_packets,
2562 adapter->total_rx_bytes);
2563 /* conservative mode (itr 3) eliminates the lowest_latency setting */
2564 if (adapter->itr_setting == 3 && adapter->rx_itr == lowest_latency)
2565 adapter->rx_itr = low_latency;
2566
2567 current_itr = max(adapter->rx_itr, adapter->tx_itr);
2568
2569 /* counts and packets in update_itr are dependent on these numbers */
2570 switch (current_itr) {
2571 case lowest_latency:
2572 new_itr = 70000;
2573 break;
2574 case low_latency:
2575 new_itr = 20000; /* aka hwitr = ~200 */
2576 break;
2577 case bulk_latency:
2578 new_itr = 4000;
2579 break;
2580 default:
2581 break;
2582 }
2583
2584set_itr_now:
2585 if (new_itr != adapter->itr) {
2586 /* this attempts to bias the interrupt rate towards Bulk
2587 * by adding intermediate steps when interrupt rate is
2588 * increasing
2589 */
2590 new_itr = new_itr > adapter->itr ?
2591 min(adapter->itr + (new_itr >> 2), new_itr) : new_itr;
2592 adapter->itr = new_itr;
2593 adapter->rx_ring->itr_val = new_itr;
2594 if (adapter->msix_entries)
2595 adapter->rx_ring->set_itr = 1;
2596 else
2597 e1000e_write_itr(adapter, new_itr);
2598 }
2599}
2600
2601/**
2602 * e1000e_write_itr - write the ITR value to the appropriate registers
2603 * @adapter: address of board private structure
2604 * @itr: new ITR value to program
2605 *
2606 * e1000e_write_itr determines if the adapter is in MSI-X mode
2607 * and, if so, writes the EITR registers with the ITR value.
2608 * Otherwise, it writes the ITR value into the ITR register.
2609 **/
2610void e1000e_write_itr(struct e1000_adapter *adapter, u32 itr)
2611{
2612 struct e1000_hw *hw = &adapter->hw;
2613 u32 new_itr = itr ? 1000000000 / (itr * 256) : 0;
2614
2615 if (adapter->msix_entries) {
2616 int vector;
2617
2618 for (vector = 0; vector < adapter->num_vectors; vector++)
2619 writel(new_itr, hw->hw_addr + E1000_EITR_82574(vector));
2620 } else {
2621 ew32(ITR, new_itr);
2622 }
2623}
2624
2625/**
2626 * e1000_alloc_queues - Allocate memory for all rings
2627 * @adapter: board private structure to initialize
2628 **/
2629static int e1000_alloc_queues(struct e1000_adapter *adapter)
2630{
2631 int size = sizeof(struct e1000_ring);
2632
2633 adapter->tx_ring = kzalloc(size, GFP_KERNEL);
2634 if (!adapter->tx_ring)
2635 goto err;
2636 adapter->tx_ring->count = adapter->tx_ring_count;
2637 adapter->tx_ring->adapter = adapter;
2638
2639 adapter->rx_ring = kzalloc(size, GFP_KERNEL);
2640 if (!adapter->rx_ring)
2641 goto err;
2642 adapter->rx_ring->count = adapter->rx_ring_count;
2643 adapter->rx_ring->adapter = adapter;
2644
2645 return 0;
2646err:
2647 e_err("Unable to allocate memory for queues\n");
2648 kfree(adapter->rx_ring);
2649 kfree(adapter->tx_ring);
2650 return -ENOMEM;
2651}
2652
2653/**
2654 * e1000e_poll - NAPI Rx polling callback
2655 * @napi: struct associated with this polling callback
2656 * @budget: number of packets driver is allowed to process this poll
2657 **/
2658static int e1000e_poll(struct napi_struct *napi, int budget)
2659{
2660 struct e1000_adapter *adapter = container_of(napi, struct e1000_adapter,
2661 napi);
2662 struct e1000_hw *hw = &adapter->hw;
2663 struct net_device *poll_dev = adapter->netdev;
2664 int tx_cleaned = 1, work_done = 0;
2665
2666 adapter = netdev_priv(poll_dev);
2667
2668 if (!adapter->msix_entries ||
2669 (adapter->rx_ring->ims_val & adapter->tx_ring->ims_val))
2670 tx_cleaned = e1000_clean_tx_irq(adapter->tx_ring);
2671
2672 adapter->clean_rx(adapter->rx_ring, &work_done, budget);
2673
2674 if (!tx_cleaned || work_done == budget)
2675 return budget;
2676
2677 /* Exit the polling mode, but don't re-enable interrupts if stack might
2678 * poll us due to busy-polling
2679 */
2680 if (likely(napi_complete_done(napi, work_done))) {
2681 if (adapter->itr_setting & 3)
2682 e1000_set_itr(adapter);
2683 if (!test_bit(__E1000_DOWN, &adapter->state)) {
2684 if (adapter->msix_entries)
2685 ew32(IMS, adapter->rx_ring->ims_val);
2686 else
2687 e1000_irq_enable(adapter);
2688 }
2689 }
2690
2691 return work_done;
2692}
2693
2694static int e1000_vlan_rx_add_vid(struct net_device *netdev,
2695 __always_unused __be16 proto, u16 vid)
2696{
2697 struct e1000_adapter *adapter = netdev_priv(netdev);
2698 struct e1000_hw *hw = &adapter->hw;
2699 u32 vfta, index;
2700
2701 /* don't update vlan cookie if already programmed */
2702 if ((adapter->hw.mng_cookie.status &
2703 E1000_MNG_DHCP_COOKIE_STATUS_VLAN) &&
2704 (vid == adapter->mng_vlan_id))
2705 return 0;
2706
2707 /* add VID to filter table */
2708 if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) {
2709 index = (vid >> 5) & 0x7F;
2710 vfta = E1000_READ_REG_ARRAY(hw, E1000_VFTA, index);
2711 vfta |= BIT((vid & 0x1F));
2712 hw->mac.ops.write_vfta(hw, index, vfta);
2713 }
2714
2715 set_bit(vid, adapter->active_vlans);
2716
2717 return 0;
2718}
2719
2720static int e1000_vlan_rx_kill_vid(struct net_device *netdev,
2721 __always_unused __be16 proto, u16 vid)
2722{
2723 struct e1000_adapter *adapter = netdev_priv(netdev);
2724 struct e1000_hw *hw = &adapter->hw;
2725 u32 vfta, index;
2726
2727 if ((adapter->hw.mng_cookie.status &
2728 E1000_MNG_DHCP_COOKIE_STATUS_VLAN) &&
2729 (vid == adapter->mng_vlan_id)) {
2730 /* release control to f/w */
2731 e1000e_release_hw_control(adapter);
2732 return 0;
2733 }
2734
2735 /* remove VID from filter table */
2736 if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) {
2737 index = (vid >> 5) & 0x7F;
2738 vfta = E1000_READ_REG_ARRAY(hw, E1000_VFTA, index);
2739 vfta &= ~BIT((vid & 0x1F));
2740 hw->mac.ops.write_vfta(hw, index, vfta);
2741 }
2742
2743 clear_bit(vid, adapter->active_vlans);
2744
2745 return 0;
2746}
2747
2748/**
2749 * e1000e_vlan_filter_disable - helper to disable hw VLAN filtering
2750 * @adapter: board private structure to initialize
2751 **/
2752static void e1000e_vlan_filter_disable(struct e1000_adapter *adapter)
2753{
2754 struct net_device *netdev = adapter->netdev;
2755 struct e1000_hw *hw = &adapter->hw;
2756 u32 rctl;
2757
2758 if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) {
2759 /* disable VLAN receive filtering */
2760 rctl = er32(RCTL);
2761 rctl &= ~(E1000_RCTL_VFE | E1000_RCTL_CFIEN);
2762 ew32(RCTL, rctl);
2763
2764 if (adapter->mng_vlan_id != (u16)E1000_MNG_VLAN_NONE) {
2765 e1000_vlan_rx_kill_vid(netdev, htons(ETH_P_8021Q),
2766 adapter->mng_vlan_id);
2767 adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
2768 }
2769 }
2770}
2771
2772/**
2773 * e1000e_vlan_filter_enable - helper to enable HW VLAN filtering
2774 * @adapter: board private structure to initialize
2775 **/
2776static void e1000e_vlan_filter_enable(struct e1000_adapter *adapter)
2777{
2778 struct e1000_hw *hw = &adapter->hw;
2779 u32 rctl;
2780
2781 if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) {
2782 /* enable VLAN receive filtering */
2783 rctl = er32(RCTL);
2784 rctl |= E1000_RCTL_VFE;
2785 rctl &= ~E1000_RCTL_CFIEN;
2786 ew32(RCTL, rctl);
2787 }
2788}
2789
2790/**
2791 * e1000e_vlan_strip_disable - helper to disable HW VLAN stripping
2792 * @adapter: board private structure to initialize
2793 **/
2794static void e1000e_vlan_strip_disable(struct e1000_adapter *adapter)
2795{
2796 struct e1000_hw *hw = &adapter->hw;
2797 u32 ctrl;
2798
2799 /* disable VLAN tag insert/strip */
2800 ctrl = er32(CTRL);
2801 ctrl &= ~E1000_CTRL_VME;
2802 ew32(CTRL, ctrl);
2803}
2804
2805/**
2806 * e1000e_vlan_strip_enable - helper to enable HW VLAN stripping
2807 * @adapter: board private structure to initialize
2808 **/
2809static void e1000e_vlan_strip_enable(struct e1000_adapter *adapter)
2810{
2811 struct e1000_hw *hw = &adapter->hw;
2812 u32 ctrl;
2813
2814 /* enable VLAN tag insert/strip */
2815 ctrl = er32(CTRL);
2816 ctrl |= E1000_CTRL_VME;
2817 ew32(CTRL, ctrl);
2818}
2819
2820static void e1000_update_mng_vlan(struct e1000_adapter *adapter)
2821{
2822 struct net_device *netdev = adapter->netdev;
2823 u16 vid = adapter->hw.mng_cookie.vlan_id;
2824 u16 old_vid = adapter->mng_vlan_id;
2825
2826 if (adapter->hw.mng_cookie.status & E1000_MNG_DHCP_COOKIE_STATUS_VLAN) {
2827 e1000_vlan_rx_add_vid(netdev, htons(ETH_P_8021Q), vid);
2828 adapter->mng_vlan_id = vid;
2829 }
2830
2831 if ((old_vid != (u16)E1000_MNG_VLAN_NONE) && (vid != old_vid))
2832 e1000_vlan_rx_kill_vid(netdev, htons(ETH_P_8021Q), old_vid);
2833}
2834
2835static void e1000_restore_vlan(struct e1000_adapter *adapter)
2836{
2837 u16 vid;
2838
2839 e1000_vlan_rx_add_vid(adapter->netdev, htons(ETH_P_8021Q), 0);
2840
2841 for_each_set_bit(vid, adapter->active_vlans, VLAN_N_VID)
2842 e1000_vlan_rx_add_vid(adapter->netdev, htons(ETH_P_8021Q), vid);
2843}
2844
2845static void e1000_init_manageability_pt(struct e1000_adapter *adapter)
2846{
2847 struct e1000_hw *hw = &adapter->hw;
2848 u32 manc, manc2h, mdef, i, j;
2849
2850 if (!(adapter->flags & FLAG_MNG_PT_ENABLED))
2851 return;
2852
2853 manc = er32(MANC);
2854
2855 /* enable receiving management packets to the host. this will probably
2856 * generate destination unreachable messages from the host OS, but
2857 * the packets will be handled on SMBUS
2858 */
2859 manc |= E1000_MANC_EN_MNG2HOST;
2860 manc2h = er32(MANC2H);
2861
2862 switch (hw->mac.type) {
2863 default:
2864 manc2h |= (E1000_MANC2H_PORT_623 | E1000_MANC2H_PORT_664);
2865 break;
2866 case e1000_82574:
2867 case e1000_82583:
2868 /* Check if IPMI pass-through decision filter already exists;
2869 * if so, enable it.
2870 */
2871 for (i = 0, j = 0; i < 8; i++) {
2872 mdef = er32(MDEF(i));
2873
2874 /* Ignore filters with anything other than IPMI ports */
2875 if (mdef & ~(E1000_MDEF_PORT_623 | E1000_MDEF_PORT_664))
2876 continue;
2877
2878 /* Enable this decision filter in MANC2H */
2879 if (mdef)
2880 manc2h |= BIT(i);
2881
2882 j |= mdef;
2883 }
2884
2885 if (j == (E1000_MDEF_PORT_623 | E1000_MDEF_PORT_664))
2886 break;
2887
2888 /* Create new decision filter in an empty filter */
2889 for (i = 0, j = 0; i < 8; i++)
2890 if (er32(MDEF(i)) == 0) {
2891 ew32(MDEF(i), (E1000_MDEF_PORT_623 |
2892 E1000_MDEF_PORT_664));
2893 manc2h |= BIT(1);
2894 j++;
2895 break;
2896 }
2897
2898 if (!j)
2899 e_warn("Unable to create IPMI pass-through filter\n");
2900 break;
2901 }
2902
2903 ew32(MANC2H, manc2h);
2904 ew32(MANC, manc);
2905}
2906
2907/**
2908 * e1000_configure_tx - Configure Transmit Unit after Reset
2909 * @adapter: board private structure
2910 *
2911 * Configure the Tx unit of the MAC after a reset.
2912 **/
2913static void e1000_configure_tx(struct e1000_adapter *adapter)
2914{
2915 struct e1000_hw *hw = &adapter->hw;
2916 struct e1000_ring *tx_ring = adapter->tx_ring;
2917 u64 tdba;
2918 u32 tdlen, tctl, tarc;
2919
2920 /* Setup the HW Tx Head and Tail descriptor pointers */
2921 tdba = tx_ring->dma;
2922 tdlen = tx_ring->count * sizeof(struct e1000_tx_desc);
2923 ew32(TDBAL(0), (tdba & DMA_BIT_MASK(32)));
2924 ew32(TDBAH(0), (tdba >> 32));
2925 ew32(TDLEN(0), tdlen);
2926 ew32(TDH(0), 0);
2927 ew32(TDT(0), 0);
2928 tx_ring->head = adapter->hw.hw_addr + E1000_TDH(0);
2929 tx_ring->tail = adapter->hw.hw_addr + E1000_TDT(0);
2930
2931 writel(0, tx_ring->head);
2932 if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA)
2933 e1000e_update_tdt_wa(tx_ring, 0);
2934 else
2935 writel(0, tx_ring->tail);
2936
2937 /* Set the Tx Interrupt Delay register */
2938 ew32(TIDV, adapter->tx_int_delay);
2939 /* Tx irq moderation */
2940 ew32(TADV, adapter->tx_abs_int_delay);
2941
2942 if (adapter->flags2 & FLAG2_DMA_BURST) {
2943 u32 txdctl = er32(TXDCTL(0));
2944
2945 txdctl &= ~(E1000_TXDCTL_PTHRESH | E1000_TXDCTL_HTHRESH |
2946 E1000_TXDCTL_WTHRESH);
2947 /* set up some performance related parameters to encourage the
2948 * hardware to use the bus more efficiently in bursts, depends
2949 * on the tx_int_delay to be enabled,
2950 * wthresh = 1 ==> burst write is disabled to avoid Tx stalls
2951 * hthresh = 1 ==> prefetch when one or more available
2952 * pthresh = 0x1f ==> prefetch if internal cache 31 or less
2953 * BEWARE: this seems to work but should be considered first if
2954 * there are Tx hangs or other Tx related bugs
2955 */
2956 txdctl |= E1000_TXDCTL_DMA_BURST_ENABLE;
2957 ew32(TXDCTL(0), txdctl);
2958 }
2959 /* erratum work around: set txdctl the same for both queues */
2960 ew32(TXDCTL(1), er32(TXDCTL(0)));
2961
2962 /* Program the Transmit Control Register */
2963 tctl = er32(TCTL);
2964 tctl &= ~E1000_TCTL_CT;
2965 tctl |= E1000_TCTL_PSP | E1000_TCTL_RTLC |
2966 (E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT);
2967
2968 if (adapter->flags & FLAG_TARC_SPEED_MODE_BIT) {
2969 tarc = er32(TARC(0));
2970 /* set the speed mode bit, we'll clear it if we're not at
2971 * gigabit link later
2972 */
2973#define SPEED_MODE_BIT BIT(21)
2974 tarc |= SPEED_MODE_BIT;
2975 ew32(TARC(0), tarc);
2976 }
2977
2978 /* errata: program both queues to unweighted RR */
2979 if (adapter->flags & FLAG_TARC_SET_BIT_ZERO) {
2980 tarc = er32(TARC(0));
2981 tarc |= 1;
2982 ew32(TARC(0), tarc);
2983 tarc = er32(TARC(1));
2984 tarc |= 1;
2985 ew32(TARC(1), tarc);
2986 }
2987
2988 /* Setup Transmit Descriptor Settings for eop descriptor */
2989 adapter->txd_cmd = E1000_TXD_CMD_EOP | E1000_TXD_CMD_IFCS;
2990
2991 /* only set IDE if we are delaying interrupts using the timers */
2992 if (adapter->tx_int_delay)
2993 adapter->txd_cmd |= E1000_TXD_CMD_IDE;
2994
2995 /* enable Report Status bit */
2996 adapter->txd_cmd |= E1000_TXD_CMD_RS;
2997
2998 ew32(TCTL, tctl);
2999
3000 hw->mac.ops.config_collision_dist(hw);
3001
3002 /* SPT and KBL Si errata workaround to avoid data corruption */
3003 if (hw->mac.type == e1000_pch_spt) {
3004 u32 reg_val;
3005
3006 reg_val = er32(IOSFPC);
3007 reg_val |= E1000_RCTL_RDMTS_HEX;
3008 ew32(IOSFPC, reg_val);
3009
3010 reg_val = er32(TARC(0));
3011 /* SPT and KBL Si errata workaround to avoid Tx hang.
3012 * Dropping the number of outstanding requests from
3013 * 3 to 2 in order to avoid a buffer overrun.
3014 */
3015 reg_val &= ~E1000_TARC0_CB_MULTIQ_3_REQ;
3016 reg_val |= E1000_TARC0_CB_MULTIQ_2_REQ;
3017 ew32(TARC(0), reg_val);
3018 }
3019}
3020
3021#define PAGE_USE_COUNT(S) (((S) >> PAGE_SHIFT) + \
3022 (((S) & (PAGE_SIZE - 1)) ? 1 : 0))
3023
3024/**
3025 * e1000_setup_rctl - configure the receive control registers
3026 * @adapter: Board private structure
3027 **/
3028static void e1000_setup_rctl(struct e1000_adapter *adapter)
3029{
3030 struct e1000_hw *hw = &adapter->hw;
3031 u32 rctl, rfctl;
3032 u32 pages = 0;
3033
3034 /* Workaround Si errata on PCHx - configure jumbo frame flow.
3035 * If jumbo frames not set, program related MAC/PHY registers
3036 * to h/w defaults
3037 */
3038 if (hw->mac.type >= e1000_pch2lan) {
3039 s32 ret_val;
3040
3041 if (adapter->netdev->mtu > ETH_DATA_LEN)
3042 ret_val = e1000_lv_jumbo_workaround_ich8lan(hw, true);
3043 else
3044 ret_val = e1000_lv_jumbo_workaround_ich8lan(hw, false);
3045
3046 if (ret_val)
3047 e_dbg("failed to enable|disable jumbo frame workaround mode\n");
3048 }
3049
3050 /* Program MC offset vector base */
3051 rctl = er32(RCTL);
3052 rctl &= ~(3 << E1000_RCTL_MO_SHIFT);
3053 rctl |= E1000_RCTL_EN | E1000_RCTL_BAM |
3054 E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF |
3055 (adapter->hw.mac.mc_filter_type << E1000_RCTL_MO_SHIFT);
3056
3057 /* Do not Store bad packets */
3058 rctl &= ~E1000_RCTL_SBP;
3059
3060 /* Enable Long Packet receive */
3061 if (adapter->netdev->mtu <= ETH_DATA_LEN)
3062 rctl &= ~E1000_RCTL_LPE;
3063 else
3064 rctl |= E1000_RCTL_LPE;
3065
3066 /* Some systems expect that the CRC is included in SMBUS traffic. The
3067 * hardware strips the CRC before sending to both SMBUS (BMC) and to
3068 * host memory when this is enabled
3069 */
3070 if (adapter->flags2 & FLAG2_CRC_STRIPPING)
3071 rctl |= E1000_RCTL_SECRC;
3072
3073 /* Workaround Si errata on 82577 PHY - configure IPG for jumbos */
3074 if ((hw->phy.type == e1000_phy_82577) && (rctl & E1000_RCTL_LPE)) {
3075 u16 phy_data;
3076
3077 e1e_rphy(hw, PHY_REG(770, 26), &phy_data);
3078 phy_data &= 0xfff8;
3079 phy_data |= BIT(2);
3080 e1e_wphy(hw, PHY_REG(770, 26), phy_data);
3081
3082 e1e_rphy(hw, 22, &phy_data);
3083 phy_data &= 0x0fff;
3084 phy_data |= BIT(14);
3085 e1e_wphy(hw, 0x10, 0x2823);
3086 e1e_wphy(hw, 0x11, 0x0003);
3087 e1e_wphy(hw, 22, phy_data);
3088 }
3089
3090 /* Setup buffer sizes */
3091 rctl &= ~E1000_RCTL_SZ_4096;
3092 rctl |= E1000_RCTL_BSEX;
3093 switch (adapter->rx_buffer_len) {
3094 case 2048:
3095 default:
3096 rctl |= E1000_RCTL_SZ_2048;
3097 rctl &= ~E1000_RCTL_BSEX;
3098 break;
3099 case 4096:
3100 rctl |= E1000_RCTL_SZ_4096;
3101 break;
3102 case 8192:
3103 rctl |= E1000_RCTL_SZ_8192;
3104 break;
3105 case 16384:
3106 rctl |= E1000_RCTL_SZ_16384;
3107 break;
3108 }
3109
3110 /* Enable Extended Status in all Receive Descriptors */
3111 rfctl = er32(RFCTL);
3112 rfctl |= E1000_RFCTL_EXTEN;
3113 ew32(RFCTL, rfctl);
3114
3115 /* 82571 and greater support packet-split where the protocol
3116 * header is placed in skb->data and the packet data is
3117 * placed in pages hanging off of skb_shinfo(skb)->nr_frags.
3118 * In the case of a non-split, skb->data is linearly filled,
3119 * followed by the page buffers. Therefore, skb->data is
3120 * sized to hold the largest protocol header.
3121 *
3122 * allocations using alloc_page take too long for regular MTU
3123 * so only enable packet split for jumbo frames
3124 *
3125 * Using pages when the page size is greater than 16k wastes
3126 * a lot of memory, since we allocate 3 pages at all times
3127 * per packet.
3128 */
3129 pages = PAGE_USE_COUNT(adapter->netdev->mtu);
3130 if ((pages <= 3) && (PAGE_SIZE <= 16384) && (rctl & E1000_RCTL_LPE))
3131 adapter->rx_ps_pages = pages;
3132 else
3133 adapter->rx_ps_pages = 0;
3134
3135 if (adapter->rx_ps_pages) {
3136 u32 psrctl = 0;
3137
3138 /* Enable Packet split descriptors */
3139 rctl |= E1000_RCTL_DTYP_PS;
3140
3141 psrctl |= adapter->rx_ps_bsize0 >> E1000_PSRCTL_BSIZE0_SHIFT;
3142
3143 switch (adapter->rx_ps_pages) {
3144 case 3:
3145 psrctl |= PAGE_SIZE << E1000_PSRCTL_BSIZE3_SHIFT;
3146 fallthrough;
3147 case 2:
3148 psrctl |= PAGE_SIZE << E1000_PSRCTL_BSIZE2_SHIFT;
3149 fallthrough;
3150 case 1:
3151 psrctl |= PAGE_SIZE >> E1000_PSRCTL_BSIZE1_SHIFT;
3152 break;
3153 }
3154
3155 ew32(PSRCTL, psrctl);
3156 }
3157
3158 /* This is useful for sniffing bad packets. */
3159 if (adapter->netdev->features & NETIF_F_RXALL) {
3160 /* UPE and MPE will be handled by normal PROMISC logic
3161 * in e1000e_set_rx_mode
3162 */
3163 rctl |= (E1000_RCTL_SBP | /* Receive bad packets */
3164 E1000_RCTL_BAM | /* RX All Bcast Pkts */
3165 E1000_RCTL_PMCF); /* RX All MAC Ctrl Pkts */
3166
3167 rctl &= ~(E1000_RCTL_VFE | /* Disable VLAN filter */
3168 E1000_RCTL_DPF | /* Allow filtered pause */
3169 E1000_RCTL_CFIEN); /* Dis VLAN CFIEN Filter */
3170 /* Do not mess with E1000_CTRL_VME, it affects transmit as well,
3171 * and that breaks VLANs.
3172 */
3173 }
3174
3175 ew32(RCTL, rctl);
3176 /* just started the receive unit, no need to restart */
3177 adapter->flags &= ~FLAG_RESTART_NOW;
3178}
3179
3180/**
3181 * e1000_configure_rx - Configure Receive Unit after Reset
3182 * @adapter: board private structure
3183 *
3184 * Configure the Rx unit of the MAC after a reset.
3185 **/
3186static void e1000_configure_rx(struct e1000_adapter *adapter)
3187{
3188 struct e1000_hw *hw = &adapter->hw;
3189 struct e1000_ring *rx_ring = adapter->rx_ring;
3190 u64 rdba;
3191 u32 rdlen, rctl, rxcsum, ctrl_ext;
3192
3193 if (adapter->rx_ps_pages) {
3194 /* this is a 32 byte descriptor */
3195 rdlen = rx_ring->count *
3196 sizeof(union e1000_rx_desc_packet_split);
3197 adapter->clean_rx = e1000_clean_rx_irq_ps;
3198 adapter->alloc_rx_buf = e1000_alloc_rx_buffers_ps;
3199 } else if (adapter->netdev->mtu > ETH_FRAME_LEN + ETH_FCS_LEN) {
3200 rdlen = rx_ring->count * sizeof(union e1000_rx_desc_extended);
3201 adapter->clean_rx = e1000_clean_jumbo_rx_irq;
3202 adapter->alloc_rx_buf = e1000_alloc_jumbo_rx_buffers;
3203 } else {
3204 rdlen = rx_ring->count * sizeof(union e1000_rx_desc_extended);
3205 adapter->clean_rx = e1000_clean_rx_irq;
3206 adapter->alloc_rx_buf = e1000_alloc_rx_buffers;
3207 }
3208
3209 /* disable receives while setting up the descriptors */
3210 rctl = er32(RCTL);
3211 if (!(adapter->flags2 & FLAG2_NO_DISABLE_RX))
3212 ew32(RCTL, rctl & ~E1000_RCTL_EN);
3213 e1e_flush();
3214 usleep_range(10000, 11000);
3215
3216 if (adapter->flags2 & FLAG2_DMA_BURST) {
3217 /* set the writeback threshold (only takes effect if the RDTR
3218 * is set). set GRAN=1 and write back up to 0x4 worth, and
3219 * enable prefetching of 0x20 Rx descriptors
3220 * granularity = 01
3221 * wthresh = 04,
3222 * hthresh = 04,
3223 * pthresh = 0x20
3224 */
3225 ew32(RXDCTL(0), E1000_RXDCTL_DMA_BURST_ENABLE);
3226 ew32(RXDCTL(1), E1000_RXDCTL_DMA_BURST_ENABLE);
3227 }
3228
3229 /* set the Receive Delay Timer Register */
3230 ew32(RDTR, adapter->rx_int_delay);
3231
3232 /* irq moderation */
3233 ew32(RADV, adapter->rx_abs_int_delay);
3234 if ((adapter->itr_setting != 0) && (adapter->itr != 0))
3235 e1000e_write_itr(adapter, adapter->itr);
3236
3237 ctrl_ext = er32(CTRL_EXT);
3238 /* Auto-Mask interrupts upon ICR access */
3239 ctrl_ext |= E1000_CTRL_EXT_IAME;
3240 ew32(IAM, 0xffffffff);
3241 ew32(CTRL_EXT, ctrl_ext);
3242 e1e_flush();
3243
3244 /* Setup the HW Rx Head and Tail Descriptor Pointers and
3245 * the Base and Length of the Rx Descriptor Ring
3246 */
3247 rdba = rx_ring->dma;
3248 ew32(RDBAL(0), (rdba & DMA_BIT_MASK(32)));
3249 ew32(RDBAH(0), (rdba >> 32));
3250 ew32(RDLEN(0), rdlen);
3251 ew32(RDH(0), 0);
3252 ew32(RDT(0), 0);
3253 rx_ring->head = adapter->hw.hw_addr + E1000_RDH(0);
3254 rx_ring->tail = adapter->hw.hw_addr + E1000_RDT(0);
3255
3256 writel(0, rx_ring->head);
3257 if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA)
3258 e1000e_update_rdt_wa(rx_ring, 0);
3259 else
3260 writel(0, rx_ring->tail);
3261
3262 /* Enable Receive Checksum Offload for TCP and UDP */
3263 rxcsum = er32(RXCSUM);
3264 if (adapter->netdev->features & NETIF_F_RXCSUM)
3265 rxcsum |= E1000_RXCSUM_TUOFL;
3266 else
3267 rxcsum &= ~E1000_RXCSUM_TUOFL;
3268 ew32(RXCSUM, rxcsum);
3269
3270 /* With jumbo frames, excessive C-state transition latencies result
3271 * in dropped transactions.
3272 */
3273 if (adapter->netdev->mtu > ETH_DATA_LEN) {
3274 u32 lat =
3275 ((er32(PBA) & E1000_PBA_RXA_MASK) * 1024 -
3276 adapter->max_frame_size) * 8 / 1000;
3277
3278 if (adapter->flags & FLAG_IS_ICH) {
3279 u32 rxdctl = er32(RXDCTL(0));
3280
3281 ew32(RXDCTL(0), rxdctl | 0x3 | BIT(8));
3282 }
3283
3284 dev_info(&adapter->pdev->dev,
3285 "Some CPU C-states have been disabled in order to enable jumbo frames\n");
3286 cpu_latency_qos_update_request(&adapter->pm_qos_req, lat);
3287 } else {
3288 cpu_latency_qos_update_request(&adapter->pm_qos_req,
3289 PM_QOS_DEFAULT_VALUE);
3290 }
3291
3292 /* Enable Receives */
3293 ew32(RCTL, rctl);
3294}
3295
3296/**
3297 * e1000e_write_mc_addr_list - write multicast addresses to MTA
3298 * @netdev: network interface device structure
3299 *
3300 * Writes multicast address list to the MTA hash table.
3301 * Returns: -ENOMEM on failure
3302 * 0 on no addresses written
3303 * X on writing X addresses to MTA
3304 */
3305static int e1000e_write_mc_addr_list(struct net_device *netdev)
3306{
3307 struct e1000_adapter *adapter = netdev_priv(netdev);
3308 struct e1000_hw *hw = &adapter->hw;
3309 struct netdev_hw_addr *ha;
3310 u8 *mta_list;
3311 int i;
3312
3313 if (netdev_mc_empty(netdev)) {
3314 /* nothing to program, so clear mc list */
3315 hw->mac.ops.update_mc_addr_list(hw, NULL, 0);
3316 return 0;
3317 }
3318
3319 mta_list = kcalloc(netdev_mc_count(netdev), ETH_ALEN, GFP_ATOMIC);
3320 if (!mta_list)
3321 return -ENOMEM;
3322
3323 /* update_mc_addr_list expects a packed array of only addresses. */
3324 i = 0;
3325 netdev_for_each_mc_addr(ha, netdev)
3326 memcpy(mta_list + (i++ * ETH_ALEN), ha->addr, ETH_ALEN);
3327
3328 hw->mac.ops.update_mc_addr_list(hw, mta_list, i);
3329 kfree(mta_list);
3330
3331 return netdev_mc_count(netdev);
3332}
3333
3334/**
3335 * e1000e_write_uc_addr_list - write unicast addresses to RAR table
3336 * @netdev: network interface device structure
3337 *
3338 * Writes unicast address list to the RAR table.
3339 * Returns: -ENOMEM on failure/insufficient address space
3340 * 0 on no addresses written
3341 * X on writing X addresses to the RAR table
3342 **/
3343static int e1000e_write_uc_addr_list(struct net_device *netdev)
3344{
3345 struct e1000_adapter *adapter = netdev_priv(netdev);
3346 struct e1000_hw *hw = &adapter->hw;
3347 unsigned int rar_entries;
3348 int count = 0;
3349
3350 rar_entries = hw->mac.ops.rar_get_count(hw);
3351
3352 /* save a rar entry for our hardware address */
3353 rar_entries--;
3354
3355 /* save a rar entry for the LAA workaround */
3356 if (adapter->flags & FLAG_RESET_OVERWRITES_LAA)
3357 rar_entries--;
3358
3359 /* return ENOMEM indicating insufficient memory for addresses */
3360 if (netdev_uc_count(netdev) > rar_entries)
3361 return -ENOMEM;
3362
3363 if (!netdev_uc_empty(netdev) && rar_entries) {
3364 struct netdev_hw_addr *ha;
3365
3366 /* write the addresses in reverse order to avoid write
3367 * combining
3368 */
3369 netdev_for_each_uc_addr(ha, netdev) {
3370 int ret_val;
3371
3372 if (!rar_entries)
3373 break;
3374 ret_val = hw->mac.ops.rar_set(hw, ha->addr, rar_entries--);
3375 if (ret_val < 0)
3376 return -ENOMEM;
3377 count++;
3378 }
3379 }
3380
3381 /* zero out the remaining RAR entries not used above */
3382 for (; rar_entries > 0; rar_entries--) {
3383 ew32(RAH(rar_entries), 0);
3384 ew32(RAL(rar_entries), 0);
3385 }
3386 e1e_flush();
3387
3388 return count;
3389}
3390
3391/**
3392 * e1000e_set_rx_mode - secondary unicast, Multicast and Promiscuous mode set
3393 * @netdev: network interface device structure
3394 *
3395 * The ndo_set_rx_mode entry point is called whenever the unicast or multicast
3396 * address list or the network interface flags are updated. This routine is
3397 * responsible for configuring the hardware for proper unicast, multicast,
3398 * promiscuous mode, and all-multi behavior.
3399 **/
3400static void e1000e_set_rx_mode(struct net_device *netdev)
3401{
3402 struct e1000_adapter *adapter = netdev_priv(netdev);
3403 struct e1000_hw *hw = &adapter->hw;
3404 u32 rctl;
3405
3406 if (pm_runtime_suspended(netdev->dev.parent))
3407 return;
3408
3409 /* Check for Promiscuous and All Multicast modes */
3410 rctl = er32(RCTL);
3411
3412 /* clear the affected bits */
3413 rctl &= ~(E1000_RCTL_UPE | E1000_RCTL_MPE);
3414
3415 if (netdev->flags & IFF_PROMISC) {
3416 rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE);
3417 /* Do not hardware filter VLANs in promisc mode */
3418 e1000e_vlan_filter_disable(adapter);
3419 } else {
3420 int count;
3421
3422 if (netdev->flags & IFF_ALLMULTI) {
3423 rctl |= E1000_RCTL_MPE;
3424 } else {
3425 /* Write addresses to the MTA, if the attempt fails
3426 * then we should just turn on promiscuous mode so
3427 * that we can at least receive multicast traffic
3428 */
3429 count = e1000e_write_mc_addr_list(netdev);
3430 if (count < 0)
3431 rctl |= E1000_RCTL_MPE;
3432 }
3433 e1000e_vlan_filter_enable(adapter);
3434 /* Write addresses to available RAR registers, if there is not
3435 * sufficient space to store all the addresses then enable
3436 * unicast promiscuous mode
3437 */
3438 count = e1000e_write_uc_addr_list(netdev);
3439 if (count < 0)
3440 rctl |= E1000_RCTL_UPE;
3441 }
3442
3443 ew32(RCTL, rctl);
3444
3445 if (netdev->features & NETIF_F_HW_VLAN_CTAG_RX)
3446 e1000e_vlan_strip_enable(adapter);
3447 else
3448 e1000e_vlan_strip_disable(adapter);
3449}
3450
3451static void e1000e_setup_rss_hash(struct e1000_adapter *adapter)
3452{
3453 struct e1000_hw *hw = &adapter->hw;
3454 u32 mrqc, rxcsum;
3455 u32 rss_key[10];
3456 int i;
3457
3458 netdev_rss_key_fill(rss_key, sizeof(rss_key));
3459 for (i = 0; i < 10; i++)
3460 ew32(RSSRK(i), rss_key[i]);
3461
3462 /* Direct all traffic to queue 0 */
3463 for (i = 0; i < 32; i++)
3464 ew32(RETA(i), 0);
3465
3466 /* Disable raw packet checksumming so that RSS hash is placed in
3467 * descriptor on writeback.
3468 */
3469 rxcsum = er32(RXCSUM);
3470 rxcsum |= E1000_RXCSUM_PCSD;
3471
3472 ew32(RXCSUM, rxcsum);
3473
3474 mrqc = (E1000_MRQC_RSS_FIELD_IPV4 |
3475 E1000_MRQC_RSS_FIELD_IPV4_TCP |
3476 E1000_MRQC_RSS_FIELD_IPV6 |
3477 E1000_MRQC_RSS_FIELD_IPV6_TCP |
3478 E1000_MRQC_RSS_FIELD_IPV6_TCP_EX);
3479
3480 ew32(MRQC, mrqc);
3481}
3482
3483/**
3484 * e1000e_get_base_timinca - get default SYSTIM time increment attributes
3485 * @adapter: board private structure
3486 * @timinca: pointer to returned time increment attributes
3487 *
3488 * Get attributes for incrementing the System Time Register SYSTIML/H at
3489 * the default base frequency, and set the cyclecounter shift value.
3490 **/
3491s32 e1000e_get_base_timinca(struct e1000_adapter *adapter, u32 *timinca)
3492{
3493 struct e1000_hw *hw = &adapter->hw;
3494 u32 incvalue, incperiod, shift;
3495
3496 /* Make sure clock is enabled on I217/I218/I219 before checking
3497 * the frequency
3498 */
3499 if ((hw->mac.type >= e1000_pch_lpt) &&
3500 !(er32(TSYNCTXCTL) & E1000_TSYNCTXCTL_ENABLED) &&
3501 !(er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_ENABLED)) {
3502 u32 fextnvm7 = er32(FEXTNVM7);
3503
3504 if (!(fextnvm7 & BIT(0))) {
3505 ew32(FEXTNVM7, fextnvm7 | BIT(0));
3506 e1e_flush();
3507 }
3508 }
3509
3510 switch (hw->mac.type) {
3511 case e1000_pch2lan:
3512 /* Stable 96MHz frequency */
3513 incperiod = INCPERIOD_96MHZ;
3514 incvalue = INCVALUE_96MHZ;
3515 shift = INCVALUE_SHIFT_96MHZ;
3516 adapter->cc.shift = shift + INCPERIOD_SHIFT_96MHZ;
3517 break;
3518 case e1000_pch_lpt:
3519 if (er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_SYSCFI) {
3520 /* Stable 96MHz frequency */
3521 incperiod = INCPERIOD_96MHZ;
3522 incvalue = INCVALUE_96MHZ;
3523 shift = INCVALUE_SHIFT_96MHZ;
3524 adapter->cc.shift = shift + INCPERIOD_SHIFT_96MHZ;
3525 } else {
3526 /* Stable 25MHz frequency */
3527 incperiod = INCPERIOD_25MHZ;
3528 incvalue = INCVALUE_25MHZ;
3529 shift = INCVALUE_SHIFT_25MHZ;
3530 adapter->cc.shift = shift;
3531 }
3532 break;
3533 case e1000_pch_spt:
3534 /* Stable 24MHz frequency */
3535 incperiod = INCPERIOD_24MHZ;
3536 incvalue = INCVALUE_24MHZ;
3537 shift = INCVALUE_SHIFT_24MHZ;
3538 adapter->cc.shift = shift;
3539 break;
3540 case e1000_pch_cnp:
3541 case e1000_pch_tgp:
3542 case e1000_pch_adp:
3543 case e1000_pch_mtp:
3544 case e1000_pch_lnp:
3545 case e1000_pch_ptp:
3546 case e1000_pch_nvp:
3547 if (er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_SYSCFI) {
3548 /* Stable 24MHz frequency */
3549 incperiod = INCPERIOD_24MHZ;
3550 incvalue = INCVALUE_24MHZ;
3551 shift = INCVALUE_SHIFT_24MHZ;
3552 adapter->cc.shift = shift;
3553 } else {
3554 /* Stable 38400KHz frequency */
3555 incperiod = INCPERIOD_38400KHZ;
3556 incvalue = INCVALUE_38400KHZ;
3557 shift = INCVALUE_SHIFT_38400KHZ;
3558 adapter->cc.shift = shift;
3559 }
3560 break;
3561 case e1000_82574:
3562 case e1000_82583:
3563 /* Stable 25MHz frequency */
3564 incperiod = INCPERIOD_25MHZ;
3565 incvalue = INCVALUE_25MHZ;
3566 shift = INCVALUE_SHIFT_25MHZ;
3567 adapter->cc.shift = shift;
3568 break;
3569 default:
3570 return -EINVAL;
3571 }
3572
3573 *timinca = ((incperiod << E1000_TIMINCA_INCPERIOD_SHIFT) |
3574 ((incvalue << shift) & E1000_TIMINCA_INCVALUE_MASK));
3575
3576 return 0;
3577}
3578
3579/**
3580 * e1000e_config_hwtstamp - configure the hwtstamp registers and enable/disable
3581 * @adapter: board private structure
3582 * @config: timestamp configuration
3583 *
3584 * Outgoing time stamping can be enabled and disabled. Play nice and
3585 * disable it when requested, although it shouldn't cause any overhead
3586 * when no packet needs it. At most one packet in the queue may be
3587 * marked for time stamping, otherwise it would be impossible to tell
3588 * for sure to which packet the hardware time stamp belongs.
3589 *
3590 * Incoming time stamping has to be configured via the hardware filters.
3591 * Not all combinations are supported, in particular event type has to be
3592 * specified. Matching the kind of event packet is not supported, with the
3593 * exception of "all V2 events regardless of level 2 or 4".
3594 **/
3595static int e1000e_config_hwtstamp(struct e1000_adapter *adapter,
3596 struct hwtstamp_config *config)
3597{
3598 struct e1000_hw *hw = &adapter->hw;
3599 u32 tsync_tx_ctl = E1000_TSYNCTXCTL_ENABLED;
3600 u32 tsync_rx_ctl = E1000_TSYNCRXCTL_ENABLED;
3601 u32 rxmtrl = 0;
3602 u16 rxudp = 0;
3603 bool is_l4 = false;
3604 bool is_l2 = false;
3605 u32 regval;
3606
3607 if (!(adapter->flags & FLAG_HAS_HW_TIMESTAMP))
3608 return -EINVAL;
3609
3610 switch (config->tx_type) {
3611 case HWTSTAMP_TX_OFF:
3612 tsync_tx_ctl = 0;
3613 break;
3614 case HWTSTAMP_TX_ON:
3615 break;
3616 default:
3617 return -ERANGE;
3618 }
3619
3620 switch (config->rx_filter) {
3621 case HWTSTAMP_FILTER_NONE:
3622 tsync_rx_ctl = 0;
3623 break;
3624 case HWTSTAMP_FILTER_PTP_V1_L4_SYNC:
3625 tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L4_V1;
3626 rxmtrl = E1000_RXMTRL_PTP_V1_SYNC_MESSAGE;
3627 is_l4 = true;
3628 break;
3629 case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ:
3630 tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L4_V1;
3631 rxmtrl = E1000_RXMTRL_PTP_V1_DELAY_REQ_MESSAGE;
3632 is_l4 = true;
3633 break;
3634 case HWTSTAMP_FILTER_PTP_V2_L2_SYNC:
3635 /* Also time stamps V2 L2 Path Delay Request/Response */
3636 tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L2_V2;
3637 rxmtrl = E1000_RXMTRL_PTP_V2_SYNC_MESSAGE;
3638 is_l2 = true;
3639 break;
3640 case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ:
3641 /* Also time stamps V2 L2 Path Delay Request/Response. */
3642 tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L2_V2;
3643 rxmtrl = E1000_RXMTRL_PTP_V2_DELAY_REQ_MESSAGE;
3644 is_l2 = true;
3645 break;
3646 case HWTSTAMP_FILTER_PTP_V2_L4_SYNC:
3647 /* Hardware cannot filter just V2 L4 Sync messages */
3648 fallthrough;
3649 case HWTSTAMP_FILTER_PTP_V2_SYNC:
3650 /* Also time stamps V2 Path Delay Request/Response. */
3651 tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L2_L4_V2;
3652 rxmtrl = E1000_RXMTRL_PTP_V2_SYNC_MESSAGE;
3653 is_l2 = true;
3654 is_l4 = true;
3655 break;
3656 case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ:
3657 /* Hardware cannot filter just V2 L4 Delay Request messages */
3658 fallthrough;
3659 case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ:
3660 /* Also time stamps V2 Path Delay Request/Response. */
3661 tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L2_L4_V2;
3662 rxmtrl = E1000_RXMTRL_PTP_V2_DELAY_REQ_MESSAGE;
3663 is_l2 = true;
3664 is_l4 = true;
3665 break;
3666 case HWTSTAMP_FILTER_PTP_V2_L4_EVENT:
3667 case HWTSTAMP_FILTER_PTP_V2_L2_EVENT:
3668 /* Hardware cannot filter just V2 L4 or L2 Event messages */
3669 fallthrough;
3670 case HWTSTAMP_FILTER_PTP_V2_EVENT:
3671 tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_EVENT_V2;
3672 config->rx_filter = HWTSTAMP_FILTER_PTP_V2_EVENT;
3673 is_l2 = true;
3674 is_l4 = true;
3675 break;
3676 case HWTSTAMP_FILTER_PTP_V1_L4_EVENT:
3677 /* For V1, the hardware can only filter Sync messages or
3678 * Delay Request messages but not both so fall-through to
3679 * time stamp all packets.
3680 */
3681 fallthrough;
3682 case HWTSTAMP_FILTER_NTP_ALL:
3683 case HWTSTAMP_FILTER_ALL:
3684 is_l2 = true;
3685 is_l4 = true;
3686 tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_ALL;
3687 config->rx_filter = HWTSTAMP_FILTER_ALL;
3688 break;
3689 default:
3690 return -ERANGE;
3691 }
3692
3693 adapter->hwtstamp_config = *config;
3694
3695 /* enable/disable Tx h/w time stamping */
3696 regval = er32(TSYNCTXCTL);
3697 regval &= ~E1000_TSYNCTXCTL_ENABLED;
3698 regval |= tsync_tx_ctl;
3699 ew32(TSYNCTXCTL, regval);
3700 if ((er32(TSYNCTXCTL) & E1000_TSYNCTXCTL_ENABLED) !=
3701 (regval & E1000_TSYNCTXCTL_ENABLED)) {
3702 e_err("Timesync Tx Control register not set as expected\n");
3703 return -EAGAIN;
3704 }
3705
3706 /* enable/disable Rx h/w time stamping */
3707 regval = er32(TSYNCRXCTL);
3708 regval &= ~(E1000_TSYNCRXCTL_ENABLED | E1000_TSYNCRXCTL_TYPE_MASK);
3709 regval |= tsync_rx_ctl;
3710 ew32(TSYNCRXCTL, regval);
3711 if ((er32(TSYNCRXCTL) & (E1000_TSYNCRXCTL_ENABLED |
3712 E1000_TSYNCRXCTL_TYPE_MASK)) !=
3713 (regval & (E1000_TSYNCRXCTL_ENABLED |
3714 E1000_TSYNCRXCTL_TYPE_MASK))) {
3715 e_err("Timesync Rx Control register not set as expected\n");
3716 return -EAGAIN;
3717 }
3718
3719 /* L2: define ethertype filter for time stamped packets */
3720 if (is_l2)
3721 rxmtrl |= ETH_P_1588;
3722
3723 /* define which PTP packets get time stamped */
3724 ew32(RXMTRL, rxmtrl);
3725
3726 /* Filter by destination port */
3727 if (is_l4) {
3728 rxudp = PTP_EV_PORT;
3729 cpu_to_be16s(&rxudp);
3730 }
3731 ew32(RXUDP, rxudp);
3732
3733 e1e_flush();
3734
3735 /* Clear TSYNCRXCTL_VALID & TSYNCTXCTL_VALID bit */
3736 er32(RXSTMPH);
3737 er32(TXSTMPH);
3738
3739 return 0;
3740}
3741
3742/**
3743 * e1000_configure - configure the hardware for Rx and Tx
3744 * @adapter: private board structure
3745 **/
3746static void e1000_configure(struct e1000_adapter *adapter)
3747{
3748 struct e1000_ring *rx_ring = adapter->rx_ring;
3749
3750 e1000e_set_rx_mode(adapter->netdev);
3751
3752 e1000_restore_vlan(adapter);
3753 e1000_init_manageability_pt(adapter);
3754
3755 e1000_configure_tx(adapter);
3756
3757 if (adapter->netdev->features & NETIF_F_RXHASH)
3758 e1000e_setup_rss_hash(adapter);
3759 e1000_setup_rctl(adapter);
3760 e1000_configure_rx(adapter);
3761 adapter->alloc_rx_buf(rx_ring, e1000_desc_unused(rx_ring), GFP_KERNEL);
3762}
3763
3764/**
3765 * e1000e_power_up_phy - restore link in case the phy was powered down
3766 * @adapter: address of board private structure
3767 *
3768 * The phy may be powered down to save power and turn off link when the
3769 * driver is unloaded and wake on lan is not enabled (among others)
3770 * *** this routine MUST be followed by a call to e1000e_reset ***
3771 **/
3772void e1000e_power_up_phy(struct e1000_adapter *adapter)
3773{
3774 if (adapter->hw.phy.ops.power_up)
3775 adapter->hw.phy.ops.power_up(&adapter->hw);
3776
3777 adapter->hw.mac.ops.setup_link(&adapter->hw);
3778}
3779
3780/**
3781 * e1000_power_down_phy - Power down the PHY
3782 * @adapter: board private structure
3783 *
3784 * Power down the PHY so no link is implied when interface is down.
3785 * The PHY cannot be powered down if management or WoL is active.
3786 */
3787static void e1000_power_down_phy(struct e1000_adapter *adapter)
3788{
3789 if (adapter->hw.phy.ops.power_down)
3790 adapter->hw.phy.ops.power_down(&adapter->hw);
3791}
3792
3793/**
3794 * e1000_flush_tx_ring - remove all descriptors from the tx_ring
3795 * @adapter: board private structure
3796 *
3797 * We want to clear all pending descriptors from the TX ring.
3798 * zeroing happens when the HW reads the regs. We assign the ring itself as
3799 * the data of the next descriptor. We don't care about the data we are about
3800 * to reset the HW.
3801 */
3802static void e1000_flush_tx_ring(struct e1000_adapter *adapter)
3803{
3804 struct e1000_hw *hw = &adapter->hw;
3805 struct e1000_ring *tx_ring = adapter->tx_ring;
3806 struct e1000_tx_desc *tx_desc = NULL;
3807 u32 tdt, tctl, txd_lower = E1000_TXD_CMD_IFCS;
3808 u16 size = 512;
3809
3810 tctl = er32(TCTL);
3811 ew32(TCTL, tctl | E1000_TCTL_EN);
3812 tdt = er32(TDT(0));
3813 BUG_ON(tdt != tx_ring->next_to_use);
3814 tx_desc = E1000_TX_DESC(*tx_ring, tx_ring->next_to_use);
3815 tx_desc->buffer_addr = cpu_to_le64(tx_ring->dma);
3816
3817 tx_desc->lower.data = cpu_to_le32(txd_lower | size);
3818 tx_desc->upper.data = 0;
3819 /* flush descriptors to memory before notifying the HW */
3820 wmb();
3821 tx_ring->next_to_use++;
3822 if (tx_ring->next_to_use == tx_ring->count)
3823 tx_ring->next_to_use = 0;
3824 ew32(TDT(0), tx_ring->next_to_use);
3825 usleep_range(200, 250);
3826}
3827
3828/**
3829 * e1000_flush_rx_ring - remove all descriptors from the rx_ring
3830 * @adapter: board private structure
3831 *
3832 * Mark all descriptors in the RX ring as consumed and disable the rx ring
3833 */
3834static void e1000_flush_rx_ring(struct e1000_adapter *adapter)
3835{
3836 u32 rctl, rxdctl;
3837 struct e1000_hw *hw = &adapter->hw;
3838
3839 rctl = er32(RCTL);
3840 ew32(RCTL, rctl & ~E1000_RCTL_EN);
3841 e1e_flush();
3842 usleep_range(100, 150);
3843
3844 rxdctl = er32(RXDCTL(0));
3845 /* zero the lower 14 bits (prefetch and host thresholds) */
3846 rxdctl &= 0xffffc000;
3847
3848 /* update thresholds: prefetch threshold to 31, host threshold to 1
3849 * and make sure the granularity is "descriptors" and not "cache lines"
3850 */
3851 rxdctl |= (0x1F | BIT(8) | E1000_RXDCTL_THRESH_UNIT_DESC);
3852
3853 ew32(RXDCTL(0), rxdctl);
3854 /* momentarily enable the RX ring for the changes to take effect */
3855 ew32(RCTL, rctl | E1000_RCTL_EN);
3856 e1e_flush();
3857 usleep_range(100, 150);
3858 ew32(RCTL, rctl & ~E1000_RCTL_EN);
3859}
3860
3861/**
3862 * e1000_flush_desc_rings - remove all descriptors from the descriptor rings
3863 * @adapter: board private structure
3864 *
3865 * In i219, the descriptor rings must be emptied before resetting the HW
3866 * or before changing the device state to D3 during runtime (runtime PM).
3867 *
3868 * Failure to do this will cause the HW to enter a unit hang state which can
3869 * only be released by PCI reset on the device
3870 *
3871 */
3872
3873static void e1000_flush_desc_rings(struct e1000_adapter *adapter)
3874{
3875 u16 hang_state;
3876 u32 fext_nvm11, tdlen;
3877 struct e1000_hw *hw = &adapter->hw;
3878
3879 /* First, disable MULR fix in FEXTNVM11 */
3880 fext_nvm11 = er32(FEXTNVM11);
3881 fext_nvm11 |= E1000_FEXTNVM11_DISABLE_MULR_FIX;
3882 ew32(FEXTNVM11, fext_nvm11);
3883 /* do nothing if we're not in faulty state, or if the queue is empty */
3884 tdlen = er32(TDLEN(0));
3885 pci_read_config_word(adapter->pdev, PCICFG_DESC_RING_STATUS,
3886 &hang_state);
3887 if (!(hang_state & FLUSH_DESC_REQUIRED) || !tdlen)
3888 return;
3889 e1000_flush_tx_ring(adapter);
3890 /* recheck, maybe the fault is caused by the rx ring */
3891 pci_read_config_word(adapter->pdev, PCICFG_DESC_RING_STATUS,
3892 &hang_state);
3893 if (hang_state & FLUSH_DESC_REQUIRED)
3894 e1000_flush_rx_ring(adapter);
3895}
3896
3897/**
3898 * e1000e_systim_reset - reset the timesync registers after a hardware reset
3899 * @adapter: board private structure
3900 *
3901 * When the MAC is reset, all hardware bits for timesync will be reset to the
3902 * default values. This function will restore the settings last in place.
3903 * Since the clock SYSTIME registers are reset, we will simply restore the
3904 * cyclecounter to the kernel real clock time.
3905 **/
3906static void e1000e_systim_reset(struct e1000_adapter *adapter)
3907{
3908 struct ptp_clock_info *info = &adapter->ptp_clock_info;
3909 struct e1000_hw *hw = &adapter->hw;
3910 unsigned long flags;
3911 u32 timinca;
3912 s32 ret_val;
3913
3914 if (!(adapter->flags & FLAG_HAS_HW_TIMESTAMP))
3915 return;
3916
3917 if (info->adjfine) {
3918 /* restore the previous ptp frequency delta */
3919 ret_val = info->adjfine(info, adapter->ptp_delta);
3920 } else {
3921 /* set the default base frequency if no adjustment possible */
3922 ret_val = e1000e_get_base_timinca(adapter, &timinca);
3923 if (!ret_val)
3924 ew32(TIMINCA, timinca);
3925 }
3926
3927 if (ret_val) {
3928 dev_warn(&adapter->pdev->dev,
3929 "Failed to restore TIMINCA clock rate delta: %d\n",
3930 ret_val);
3931 return;
3932 }
3933
3934 /* reset the systim ns time counter */
3935 spin_lock_irqsave(&adapter->systim_lock, flags);
3936 timecounter_init(&adapter->tc, &adapter->cc,
3937 ktime_to_ns(ktime_get_real()));
3938 spin_unlock_irqrestore(&adapter->systim_lock, flags);
3939
3940 /* restore the previous hwtstamp configuration settings */
3941 e1000e_config_hwtstamp(adapter, &adapter->hwtstamp_config);
3942}
3943
3944/**
3945 * e1000e_reset - bring the hardware into a known good state
3946 * @adapter: board private structure
3947 *
3948 * This function boots the hardware and enables some settings that
3949 * require a configuration cycle of the hardware - those cannot be
3950 * set/changed during runtime. After reset the device needs to be
3951 * properly configured for Rx, Tx etc.
3952 */
3953void e1000e_reset(struct e1000_adapter *adapter)
3954{
3955 struct e1000_mac_info *mac = &adapter->hw.mac;
3956 struct e1000_fc_info *fc = &adapter->hw.fc;
3957 struct e1000_hw *hw = &adapter->hw;
3958 u32 tx_space, min_tx_space, min_rx_space;
3959 u32 pba = adapter->pba;
3960 u16 hwm;
3961
3962 /* reset Packet Buffer Allocation to default */
3963 ew32(PBA, pba);
3964
3965 if (adapter->max_frame_size > (VLAN_ETH_FRAME_LEN + ETH_FCS_LEN)) {
3966 /* To maintain wire speed transmits, the Tx FIFO should be
3967 * large enough to accommodate two full transmit packets,
3968 * rounded up to the next 1KB and expressed in KB. Likewise,
3969 * the Rx FIFO should be large enough to accommodate at least
3970 * one full receive packet and is similarly rounded up and
3971 * expressed in KB.
3972 */
3973 pba = er32(PBA);
3974 /* upper 16 bits has Tx packet buffer allocation size in KB */
3975 tx_space = pba >> 16;
3976 /* lower 16 bits has Rx packet buffer allocation size in KB */
3977 pba &= 0xffff;
3978 /* the Tx fifo also stores 16 bytes of information about the Tx
3979 * but don't include ethernet FCS because hardware appends it
3980 */
3981 min_tx_space = (adapter->max_frame_size +
3982 sizeof(struct e1000_tx_desc) - ETH_FCS_LEN) * 2;
3983 min_tx_space = ALIGN(min_tx_space, 1024);
3984 min_tx_space >>= 10;
3985 /* software strips receive CRC, so leave room for it */
3986 min_rx_space = adapter->max_frame_size;
3987 min_rx_space = ALIGN(min_rx_space, 1024);
3988 min_rx_space >>= 10;
3989
3990 /* If current Tx allocation is less than the min Tx FIFO size,
3991 * and the min Tx FIFO size is less than the current Rx FIFO
3992 * allocation, take space away from current Rx allocation
3993 */
3994 if ((tx_space < min_tx_space) &&
3995 ((min_tx_space - tx_space) < pba)) {
3996 pba -= min_tx_space - tx_space;
3997
3998 /* if short on Rx space, Rx wins and must trump Tx
3999 * adjustment
4000 */
4001 if (pba < min_rx_space)
4002 pba = min_rx_space;
4003 }
4004
4005 ew32(PBA, pba);
4006 }
4007
4008 /* flow control settings
4009 *
4010 * The high water mark must be low enough to fit one full frame
4011 * (or the size used for early receive) above it in the Rx FIFO.
4012 * Set it to the lower of:
4013 * - 90% of the Rx FIFO size, and
4014 * - the full Rx FIFO size minus one full frame
4015 */
4016 if (adapter->flags & FLAG_DISABLE_FC_PAUSE_TIME)
4017 fc->pause_time = 0xFFFF;
4018 else
4019 fc->pause_time = E1000_FC_PAUSE_TIME;
4020 fc->send_xon = true;
4021 fc->current_mode = fc->requested_mode;
4022
4023 switch (hw->mac.type) {
4024 case e1000_ich9lan:
4025 case e1000_ich10lan:
4026 if (adapter->netdev->mtu > ETH_DATA_LEN) {
4027 pba = 14;
4028 ew32(PBA, pba);
4029 fc->high_water = 0x2800;
4030 fc->low_water = fc->high_water - 8;
4031 break;
4032 }
4033 fallthrough;
4034 default:
4035 hwm = min(((pba << 10) * 9 / 10),
4036 ((pba << 10) - adapter->max_frame_size));
4037
4038 fc->high_water = hwm & E1000_FCRTH_RTH; /* 8-byte granularity */
4039 fc->low_water = fc->high_water - 8;
4040 break;
4041 case e1000_pchlan:
4042 /* Workaround PCH LOM adapter hangs with certain network
4043 * loads. If hangs persist, try disabling Tx flow control.
4044 */
4045 if (adapter->netdev->mtu > ETH_DATA_LEN) {
4046 fc->high_water = 0x3500;
4047 fc->low_water = 0x1500;
4048 } else {
4049 fc->high_water = 0x5000;
4050 fc->low_water = 0x3000;
4051 }
4052 fc->refresh_time = 0x1000;
4053 break;
4054 case e1000_pch2lan:
4055 case e1000_pch_lpt:
4056 case e1000_pch_spt:
4057 case e1000_pch_cnp:
4058 case e1000_pch_tgp:
4059 case e1000_pch_adp:
4060 case e1000_pch_mtp:
4061 case e1000_pch_lnp:
4062 case e1000_pch_ptp:
4063 case e1000_pch_nvp:
4064 fc->refresh_time = 0xFFFF;
4065 fc->pause_time = 0xFFFF;
4066
4067 if (adapter->netdev->mtu <= ETH_DATA_LEN) {
4068 fc->high_water = 0x05C20;
4069 fc->low_water = 0x05048;
4070 break;
4071 }
4072
4073 pba = 14;
4074 ew32(PBA, pba);
4075 fc->high_water = ((pba << 10) * 9 / 10) & E1000_FCRTH_RTH;
4076 fc->low_water = ((pba << 10) * 8 / 10) & E1000_FCRTL_RTL;
4077 break;
4078 }
4079
4080 /* Alignment of Tx data is on an arbitrary byte boundary with the
4081 * maximum size per Tx descriptor limited only to the transmit
4082 * allocation of the packet buffer minus 96 bytes with an upper
4083 * limit of 24KB due to receive synchronization limitations.
4084 */
4085 adapter->tx_fifo_limit = min_t(u32, ((er32(PBA) >> 16) << 10) - 96,
4086 24 << 10);
4087
4088 /* Disable Adaptive Interrupt Moderation if 2 full packets cannot
4089 * fit in receive buffer.
4090 */
4091 if (adapter->itr_setting & 0x3) {
4092 if ((adapter->max_frame_size * 2) > (pba << 10)) {
4093 if (!(adapter->flags2 & FLAG2_DISABLE_AIM)) {
4094 dev_info(&adapter->pdev->dev,
4095 "Interrupt Throttle Rate off\n");
4096 adapter->flags2 |= FLAG2_DISABLE_AIM;
4097 e1000e_write_itr(adapter, 0);
4098 }
4099 } else if (adapter->flags2 & FLAG2_DISABLE_AIM) {
4100 dev_info(&adapter->pdev->dev,
4101 "Interrupt Throttle Rate on\n");
4102 adapter->flags2 &= ~FLAG2_DISABLE_AIM;
4103 adapter->itr = 20000;
4104 e1000e_write_itr(adapter, adapter->itr);
4105 }
4106 }
4107
4108 if (hw->mac.type >= e1000_pch_spt)
4109 e1000_flush_desc_rings(adapter);
4110 /* Allow time for pending master requests to run */
4111 mac->ops.reset_hw(hw);
4112
4113 /* For parts with AMT enabled, let the firmware know
4114 * that the network interface is in control
4115 */
4116 if (adapter->flags & FLAG_HAS_AMT)
4117 e1000e_get_hw_control(adapter);
4118
4119 ew32(WUC, 0);
4120
4121 if (mac->ops.init_hw(hw))
4122 e_err("Hardware Error\n");
4123
4124 e1000_update_mng_vlan(adapter);
4125
4126 /* Enable h/w to recognize an 802.1Q VLAN Ethernet packet */
4127 ew32(VET, ETH_P_8021Q);
4128
4129 e1000e_reset_adaptive(hw);
4130
4131 /* restore systim and hwtstamp settings */
4132 e1000e_systim_reset(adapter);
4133
4134 /* Set EEE advertisement as appropriate */
4135 if (adapter->flags2 & FLAG2_HAS_EEE) {
4136 s32 ret_val;
4137 u16 adv_addr;
4138
4139 switch (hw->phy.type) {
4140 case e1000_phy_82579:
4141 adv_addr = I82579_EEE_ADVERTISEMENT;
4142 break;
4143 case e1000_phy_i217:
4144 adv_addr = I217_EEE_ADVERTISEMENT;
4145 break;
4146 default:
4147 dev_err(&adapter->pdev->dev,
4148 "Invalid PHY type setting EEE advertisement\n");
4149 return;
4150 }
4151
4152 ret_val = hw->phy.ops.acquire(hw);
4153 if (ret_val) {
4154 dev_err(&adapter->pdev->dev,
4155 "EEE advertisement - unable to acquire PHY\n");
4156 return;
4157 }
4158
4159 e1000_write_emi_reg_locked(hw, adv_addr,
4160 hw->dev_spec.ich8lan.eee_disable ?
4161 0 : adapter->eee_advert);
4162
4163 hw->phy.ops.release(hw);
4164 }
4165
4166 if (!netif_running(adapter->netdev) &&
4167 !test_bit(__E1000_TESTING, &adapter->state))
4168 e1000_power_down_phy(adapter);
4169
4170 e1000_get_phy_info(hw);
4171
4172 if ((adapter->flags & FLAG_HAS_SMART_POWER_DOWN) &&
4173 !(adapter->flags & FLAG_SMART_POWER_DOWN)) {
4174 u16 phy_data = 0;
4175 /* speed up time to link by disabling smart power down, ignore
4176 * the return value of this function because there is nothing
4177 * different we would do if it failed
4178 */
4179 e1e_rphy(hw, IGP02E1000_PHY_POWER_MGMT, &phy_data);
4180 phy_data &= ~IGP02E1000_PM_SPD;
4181 e1e_wphy(hw, IGP02E1000_PHY_POWER_MGMT, phy_data);
4182 }
4183 if (hw->mac.type >= e1000_pch_spt && adapter->int_mode == 0) {
4184 u32 reg;
4185
4186 /* Fextnvm7 @ 0xe4[2] = 1 */
4187 reg = er32(FEXTNVM7);
4188 reg |= E1000_FEXTNVM7_SIDE_CLK_UNGATE;
4189 ew32(FEXTNVM7, reg);
4190 /* Fextnvm9 @ 0x5bb4[13:12] = 11 */
4191 reg = er32(FEXTNVM9);
4192 reg |= E1000_FEXTNVM9_IOSFSB_CLKGATE_DIS |
4193 E1000_FEXTNVM9_IOSFSB_CLKREQ_DIS;
4194 ew32(FEXTNVM9, reg);
4195 }
4196
4197}
4198
4199/**
4200 * e1000e_trigger_lsc - trigger an LSC interrupt
4201 * @adapter: board private structure
4202 *
4203 * Fire a link status change interrupt to start the watchdog.
4204 **/
4205static void e1000e_trigger_lsc(struct e1000_adapter *adapter)
4206{
4207 struct e1000_hw *hw = &adapter->hw;
4208
4209 if (adapter->msix_entries)
4210 ew32(ICS, E1000_ICS_LSC | E1000_ICS_OTHER);
4211 else
4212 ew32(ICS, E1000_ICS_LSC);
4213}
4214
4215void e1000e_up(struct e1000_adapter *adapter)
4216{
4217 /* hardware has been reset, we need to reload some things */
4218 e1000_configure(adapter);
4219
4220 clear_bit(__E1000_DOWN, &adapter->state);
4221
4222 if (adapter->msix_entries)
4223 e1000_configure_msix(adapter);
4224 e1000_irq_enable(adapter);
4225
4226 /* Tx queue started by watchdog timer when link is up */
4227
4228 e1000e_trigger_lsc(adapter);
4229}
4230
4231static void e1000e_flush_descriptors(struct e1000_adapter *adapter)
4232{
4233 struct e1000_hw *hw = &adapter->hw;
4234
4235 if (!(adapter->flags2 & FLAG2_DMA_BURST))
4236 return;
4237
4238 /* flush pending descriptor writebacks to memory */
4239 ew32(TIDV, adapter->tx_int_delay | E1000_TIDV_FPD);
4240 ew32(RDTR, adapter->rx_int_delay | E1000_RDTR_FPD);
4241
4242 /* execute the writes immediately */
4243 e1e_flush();
4244
4245 /* due to rare timing issues, write to TIDV/RDTR again to ensure the
4246 * write is successful
4247 */
4248 ew32(TIDV, adapter->tx_int_delay | E1000_TIDV_FPD);
4249 ew32(RDTR, adapter->rx_int_delay | E1000_RDTR_FPD);
4250
4251 /* execute the writes immediately */
4252 e1e_flush();
4253}
4254
4255static void e1000e_update_stats(struct e1000_adapter *adapter);
4256
4257/**
4258 * e1000e_down - quiesce the device and optionally reset the hardware
4259 * @adapter: board private structure
4260 * @reset: boolean flag to reset the hardware or not
4261 */
4262void e1000e_down(struct e1000_adapter *adapter, bool reset)
4263{
4264 struct net_device *netdev = adapter->netdev;
4265 struct e1000_hw *hw = &adapter->hw;
4266 u32 tctl, rctl;
4267
4268 /* signal that we're down so the interrupt handler does not
4269 * reschedule our watchdog timer
4270 */
4271 set_bit(__E1000_DOWN, &adapter->state);
4272
4273 netif_carrier_off(netdev);
4274
4275 /* disable receives in the hardware */
4276 rctl = er32(RCTL);
4277 if (!(adapter->flags2 & FLAG2_NO_DISABLE_RX))
4278 ew32(RCTL, rctl & ~E1000_RCTL_EN);
4279 /* flush and sleep below */
4280
4281 netif_stop_queue(netdev);
4282
4283 /* disable transmits in the hardware */
4284 tctl = er32(TCTL);
4285 tctl &= ~E1000_TCTL_EN;
4286 ew32(TCTL, tctl);
4287
4288 /* flush both disables and wait for them to finish */
4289 e1e_flush();
4290 usleep_range(10000, 11000);
4291
4292 e1000_irq_disable(adapter);
4293
4294 napi_synchronize(&adapter->napi);
4295
4296 del_timer_sync(&adapter->watchdog_timer);
4297 del_timer_sync(&adapter->phy_info_timer);
4298
4299 spin_lock(&adapter->stats64_lock);
4300 e1000e_update_stats(adapter);
4301 spin_unlock(&adapter->stats64_lock);
4302
4303 e1000e_flush_descriptors(adapter);
4304
4305 adapter->link_speed = 0;
4306 adapter->link_duplex = 0;
4307
4308 /* Disable Si errata workaround on PCHx for jumbo frame flow */
4309 if ((hw->mac.type >= e1000_pch2lan) &&
4310 (adapter->netdev->mtu > ETH_DATA_LEN) &&
4311 e1000_lv_jumbo_workaround_ich8lan(hw, false))
4312 e_dbg("failed to disable jumbo frame workaround mode\n");
4313
4314 if (!pci_channel_offline(adapter->pdev)) {
4315 if (reset)
4316 e1000e_reset(adapter);
4317 else if (hw->mac.type >= e1000_pch_spt)
4318 e1000_flush_desc_rings(adapter);
4319 }
4320 e1000_clean_tx_ring(adapter->tx_ring);
4321 e1000_clean_rx_ring(adapter->rx_ring);
4322}
4323
4324void e1000e_reinit_locked(struct e1000_adapter *adapter)
4325{
4326 might_sleep();
4327 while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
4328 usleep_range(1000, 1100);
4329 e1000e_down(adapter, true);
4330 e1000e_up(adapter);
4331 clear_bit(__E1000_RESETTING, &adapter->state);
4332}
4333
4334/**
4335 * e1000e_sanitize_systim - sanitize raw cycle counter reads
4336 * @hw: pointer to the HW structure
4337 * @systim: PHC time value read, sanitized and returned
4338 * @sts: structure to hold system time before and after reading SYSTIML,
4339 * may be NULL
4340 *
4341 * Errata for 82574/82583 possible bad bits read from SYSTIMH/L:
4342 * check to see that the time is incrementing at a reasonable
4343 * rate and is a multiple of incvalue.
4344 **/
4345static u64 e1000e_sanitize_systim(struct e1000_hw *hw, u64 systim,
4346 struct ptp_system_timestamp *sts)
4347{
4348 u64 time_delta, rem, temp;
4349 u64 systim_next;
4350 u32 incvalue;
4351 int i;
4352
4353 incvalue = er32(TIMINCA) & E1000_TIMINCA_INCVALUE_MASK;
4354 for (i = 0; i < E1000_MAX_82574_SYSTIM_REREADS; i++) {
4355 /* latch SYSTIMH on read of SYSTIML */
4356 ptp_read_system_prets(sts);
4357 systim_next = (u64)er32(SYSTIML);
4358 ptp_read_system_postts(sts);
4359 systim_next |= (u64)er32(SYSTIMH) << 32;
4360
4361 time_delta = systim_next - systim;
4362 temp = time_delta;
4363 /* VMWare users have seen incvalue of zero, don't div / 0 */
4364 rem = incvalue ? do_div(temp, incvalue) : (time_delta != 0);
4365
4366 systim = systim_next;
4367
4368 if ((time_delta < E1000_82574_SYSTIM_EPSILON) && (rem == 0))
4369 break;
4370 }
4371
4372 return systim;
4373}
4374
4375/**
4376 * e1000e_read_systim - read SYSTIM register
4377 * @adapter: board private structure
4378 * @sts: structure which will contain system time before and after reading
4379 * SYSTIML, may be NULL
4380 **/
4381u64 e1000e_read_systim(struct e1000_adapter *adapter,
4382 struct ptp_system_timestamp *sts)
4383{
4384 struct e1000_hw *hw = &adapter->hw;
4385 u32 systimel, systimel_2, systimeh;
4386 u64 systim;
4387 /* SYSTIMH latching upon SYSTIML read does not work well.
4388 * This means that if SYSTIML overflows after we read it but before
4389 * we read SYSTIMH, the value of SYSTIMH has been incremented and we
4390 * will experience a huge non linear increment in the systime value
4391 * to fix that we test for overflow and if true, we re-read systime.
4392 */
4393 ptp_read_system_prets(sts);
4394 systimel = er32(SYSTIML);
4395 ptp_read_system_postts(sts);
4396 systimeh = er32(SYSTIMH);
4397 /* Is systimel is so large that overflow is possible? */
4398 if (systimel >= (u32)0xffffffff - E1000_TIMINCA_INCVALUE_MASK) {
4399 ptp_read_system_prets(sts);
4400 systimel_2 = er32(SYSTIML);
4401 ptp_read_system_postts(sts);
4402 if (systimel > systimel_2) {
4403 /* There was an overflow, read again SYSTIMH, and use
4404 * systimel_2
4405 */
4406 systimeh = er32(SYSTIMH);
4407 systimel = systimel_2;
4408 }
4409 }
4410 systim = (u64)systimel;
4411 systim |= (u64)systimeh << 32;
4412
4413 if (adapter->flags2 & FLAG2_CHECK_SYSTIM_OVERFLOW)
4414 systim = e1000e_sanitize_systim(hw, systim, sts);
4415
4416 return systim;
4417}
4418
4419/**
4420 * e1000e_cyclecounter_read - read raw cycle counter (used by time counter)
4421 * @cc: cyclecounter structure
4422 **/
4423static u64 e1000e_cyclecounter_read(const struct cyclecounter *cc)
4424{
4425 struct e1000_adapter *adapter = container_of(cc, struct e1000_adapter,
4426 cc);
4427
4428 return e1000e_read_systim(adapter, NULL);
4429}
4430
4431/**
4432 * e1000_sw_init - Initialize general software structures (struct e1000_adapter)
4433 * @adapter: board private structure to initialize
4434 *
4435 * e1000_sw_init initializes the Adapter private data structure.
4436 * Fields are initialized based on PCI device information and
4437 * OS network device settings (MTU size).
4438 **/
4439static int e1000_sw_init(struct e1000_adapter *adapter)
4440{
4441 struct net_device *netdev = adapter->netdev;
4442
4443 adapter->rx_buffer_len = VLAN_ETH_FRAME_LEN + ETH_FCS_LEN;
4444 adapter->rx_ps_bsize0 = 128;
4445 adapter->max_frame_size = netdev->mtu + VLAN_ETH_HLEN + ETH_FCS_LEN;
4446 adapter->min_frame_size = ETH_ZLEN + ETH_FCS_LEN;
4447 adapter->tx_ring_count = E1000_DEFAULT_TXD;
4448 adapter->rx_ring_count = E1000_DEFAULT_RXD;
4449
4450 spin_lock_init(&adapter->stats64_lock);
4451
4452 e1000e_set_interrupt_capability(adapter);
4453
4454 if (e1000_alloc_queues(adapter))
4455 return -ENOMEM;
4456
4457 /* Setup hardware time stamping cyclecounter */
4458 if (adapter->flags & FLAG_HAS_HW_TIMESTAMP) {
4459 adapter->cc.read = e1000e_cyclecounter_read;
4460 adapter->cc.mask = CYCLECOUNTER_MASK(64);
4461 adapter->cc.mult = 1;
4462 /* cc.shift set in e1000e_get_base_tininca() */
4463
4464 spin_lock_init(&adapter->systim_lock);
4465 INIT_WORK(&adapter->tx_hwtstamp_work, e1000e_tx_hwtstamp_work);
4466 }
4467
4468 /* Explicitly disable IRQ since the NIC can be in any state. */
4469 e1000_irq_disable(adapter);
4470
4471 set_bit(__E1000_DOWN, &adapter->state);
4472 return 0;
4473}
4474
4475/**
4476 * e1000_intr_msi_test - Interrupt Handler
4477 * @irq: interrupt number
4478 * @data: pointer to a network interface device structure
4479 **/
4480static irqreturn_t e1000_intr_msi_test(int __always_unused irq, void *data)
4481{
4482 struct net_device *netdev = data;
4483 struct e1000_adapter *adapter = netdev_priv(netdev);
4484 struct e1000_hw *hw = &adapter->hw;
4485 u32 icr = er32(ICR);
4486
4487 e_dbg("icr is %08X\n", icr);
4488 if (icr & E1000_ICR_RXSEQ) {
4489 adapter->flags &= ~FLAG_MSI_TEST_FAILED;
4490 /* Force memory writes to complete before acknowledging the
4491 * interrupt is handled.
4492 */
4493 wmb();
4494 }
4495
4496 return IRQ_HANDLED;
4497}
4498
4499/**
4500 * e1000_test_msi_interrupt - Returns 0 for successful test
4501 * @adapter: board private struct
4502 *
4503 * code flow taken from tg3.c
4504 **/
4505static int e1000_test_msi_interrupt(struct e1000_adapter *adapter)
4506{
4507 struct net_device *netdev = adapter->netdev;
4508 struct e1000_hw *hw = &adapter->hw;
4509 int err;
4510
4511 /* poll_enable hasn't been called yet, so don't need disable */
4512 /* clear any pending events */
4513 er32(ICR);
4514
4515 /* free the real vector and request a test handler */
4516 e1000_free_irq(adapter);
4517 e1000e_reset_interrupt_capability(adapter);
4518
4519 /* Assume that the test fails, if it succeeds then the test
4520 * MSI irq handler will unset this flag
4521 */
4522 adapter->flags |= FLAG_MSI_TEST_FAILED;
4523
4524 err = pci_enable_msi(adapter->pdev);
4525 if (err)
4526 goto msi_test_failed;
4527
4528 err = request_irq(adapter->pdev->irq, e1000_intr_msi_test, 0,
4529 netdev->name, netdev);
4530 if (err) {
4531 pci_disable_msi(adapter->pdev);
4532 goto msi_test_failed;
4533 }
4534
4535 /* Force memory writes to complete before enabling and firing an
4536 * interrupt.
4537 */
4538 wmb();
4539
4540 e1000_irq_enable(adapter);
4541
4542 /* fire an unusual interrupt on the test handler */
4543 ew32(ICS, E1000_ICS_RXSEQ);
4544 e1e_flush();
4545 msleep(100);
4546
4547 e1000_irq_disable(adapter);
4548
4549 rmb(); /* read flags after interrupt has been fired */
4550
4551 if (adapter->flags & FLAG_MSI_TEST_FAILED) {
4552 adapter->int_mode = E1000E_INT_MODE_LEGACY;
4553 e_info("MSI interrupt test failed, using legacy interrupt.\n");
4554 } else {
4555 e_dbg("MSI interrupt test succeeded!\n");
4556 }
4557
4558 free_irq(adapter->pdev->irq, netdev);
4559 pci_disable_msi(adapter->pdev);
4560
4561msi_test_failed:
4562 e1000e_set_interrupt_capability(adapter);
4563 return e1000_request_irq(adapter);
4564}
4565
4566/**
4567 * e1000_test_msi - Returns 0 if MSI test succeeds or INTx mode is restored
4568 * @adapter: board private struct
4569 *
4570 * code flow taken from tg3.c, called with e1000 interrupts disabled.
4571 **/
4572static int e1000_test_msi(struct e1000_adapter *adapter)
4573{
4574 int err;
4575 u16 pci_cmd;
4576
4577 if (!(adapter->flags & FLAG_MSI_ENABLED))
4578 return 0;
4579
4580 /* disable SERR in case the MSI write causes a master abort */
4581 pci_read_config_word(adapter->pdev, PCI_COMMAND, &pci_cmd);
4582 if (pci_cmd & PCI_COMMAND_SERR)
4583 pci_write_config_word(adapter->pdev, PCI_COMMAND,
4584 pci_cmd & ~PCI_COMMAND_SERR);
4585
4586 err = e1000_test_msi_interrupt(adapter);
4587
4588 /* re-enable SERR */
4589 if (pci_cmd & PCI_COMMAND_SERR) {
4590 pci_read_config_word(adapter->pdev, PCI_COMMAND, &pci_cmd);
4591 pci_cmd |= PCI_COMMAND_SERR;
4592 pci_write_config_word(adapter->pdev, PCI_COMMAND, pci_cmd);
4593 }
4594
4595 return err;
4596}
4597
4598/**
4599 * e1000e_open - Called when a network interface is made active
4600 * @netdev: network interface device structure
4601 *
4602 * Returns 0 on success, negative value on failure
4603 *
4604 * The open entry point is called when a network interface is made
4605 * active by the system (IFF_UP). At this point all resources needed
4606 * for transmit and receive operations are allocated, the interrupt
4607 * handler is registered with the OS, the watchdog timer is started,
4608 * and the stack is notified that the interface is ready.
4609 **/
4610int e1000e_open(struct net_device *netdev)
4611{
4612 struct e1000_adapter *adapter = netdev_priv(netdev);
4613 struct e1000_hw *hw = &adapter->hw;
4614 struct pci_dev *pdev = adapter->pdev;
4615 int err;
4616
4617 /* disallow open during test */
4618 if (test_bit(__E1000_TESTING, &adapter->state))
4619 return -EBUSY;
4620
4621 pm_runtime_get_sync(&pdev->dev);
4622
4623 netif_carrier_off(netdev);
4624 netif_stop_queue(netdev);
4625
4626 /* allocate transmit descriptors */
4627 err = e1000e_setup_tx_resources(adapter->tx_ring);
4628 if (err)
4629 goto err_setup_tx;
4630
4631 /* allocate receive descriptors */
4632 err = e1000e_setup_rx_resources(adapter->rx_ring);
4633 if (err)
4634 goto err_setup_rx;
4635
4636 /* If AMT is enabled, let the firmware know that the network
4637 * interface is now open and reset the part to a known state.
4638 */
4639 if (adapter->flags & FLAG_HAS_AMT) {
4640 e1000e_get_hw_control(adapter);
4641 e1000e_reset(adapter);
4642 }
4643
4644 e1000e_power_up_phy(adapter);
4645
4646 adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
4647 if ((adapter->hw.mng_cookie.status & E1000_MNG_DHCP_COOKIE_STATUS_VLAN))
4648 e1000_update_mng_vlan(adapter);
4649
4650 /* DMA latency requirement to workaround jumbo issue */
4651 cpu_latency_qos_add_request(&adapter->pm_qos_req, PM_QOS_DEFAULT_VALUE);
4652
4653 /* before we allocate an interrupt, we must be ready to handle it.
4654 * Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt
4655 * as soon as we call pci_request_irq, so we have to setup our
4656 * clean_rx handler before we do so.
4657 */
4658 e1000_configure(adapter);
4659
4660 err = e1000_request_irq(adapter);
4661 if (err)
4662 goto err_req_irq;
4663
4664 /* Work around PCIe errata with MSI interrupts causing some chipsets to
4665 * ignore e1000e MSI messages, which means we need to test our MSI
4666 * interrupt now
4667 */
4668 if (adapter->int_mode != E1000E_INT_MODE_LEGACY) {
4669 err = e1000_test_msi(adapter);
4670 if (err) {
4671 e_err("Interrupt allocation failed\n");
4672 goto err_req_irq;
4673 }
4674 }
4675
4676 /* From here on the code is the same as e1000e_up() */
4677 clear_bit(__E1000_DOWN, &adapter->state);
4678
4679 napi_enable(&adapter->napi);
4680
4681 e1000_irq_enable(adapter);
4682
4683 adapter->tx_hang_recheck = false;
4684
4685 hw->mac.get_link_status = true;
4686 pm_runtime_put(&pdev->dev);
4687
4688 e1000e_trigger_lsc(adapter);
4689
4690 return 0;
4691
4692err_req_irq:
4693 cpu_latency_qos_remove_request(&adapter->pm_qos_req);
4694 e1000e_release_hw_control(adapter);
4695 e1000_power_down_phy(adapter);
4696 e1000e_free_rx_resources(adapter->rx_ring);
4697err_setup_rx:
4698 e1000e_free_tx_resources(adapter->tx_ring);
4699err_setup_tx:
4700 e1000e_reset(adapter);
4701 pm_runtime_put_sync(&pdev->dev);
4702
4703 return err;
4704}
4705
4706/**
4707 * e1000e_close - Disables a network interface
4708 * @netdev: network interface device structure
4709 *
4710 * Returns 0, this is not allowed to fail
4711 *
4712 * The close entry point is called when an interface is de-activated
4713 * by the OS. The hardware is still under the drivers control, but
4714 * needs to be disabled. A global MAC reset is issued to stop the
4715 * hardware, and all transmit and receive resources are freed.
4716 **/
4717int e1000e_close(struct net_device *netdev)
4718{
4719 struct e1000_adapter *adapter = netdev_priv(netdev);
4720 struct pci_dev *pdev = adapter->pdev;
4721 int count = E1000_CHECK_RESET_COUNT;
4722
4723 while (test_bit(__E1000_RESETTING, &adapter->state) && count--)
4724 usleep_range(10000, 11000);
4725
4726 WARN_ON(test_bit(__E1000_RESETTING, &adapter->state));
4727
4728 pm_runtime_get_sync(&pdev->dev);
4729
4730 if (netif_device_present(netdev)) {
4731 e1000e_down(adapter, true);
4732 e1000_free_irq(adapter);
4733
4734 /* Link status message must follow this format */
4735 netdev_info(netdev, "NIC Link is Down\n");
4736 }
4737
4738 napi_disable(&adapter->napi);
4739
4740 e1000e_free_tx_resources(adapter->tx_ring);
4741 e1000e_free_rx_resources(adapter->rx_ring);
4742
4743 /* kill manageability vlan ID if supported, but not if a vlan with
4744 * the same ID is registered on the host OS (let 8021q kill it)
4745 */
4746 if (adapter->hw.mng_cookie.status & E1000_MNG_DHCP_COOKIE_STATUS_VLAN)
4747 e1000_vlan_rx_kill_vid(netdev, htons(ETH_P_8021Q),
4748 adapter->mng_vlan_id);
4749
4750 /* If AMT is enabled, let the firmware know that the network
4751 * interface is now closed
4752 */
4753 if ((adapter->flags & FLAG_HAS_AMT) &&
4754 !test_bit(__E1000_TESTING, &adapter->state))
4755 e1000e_release_hw_control(adapter);
4756
4757 cpu_latency_qos_remove_request(&adapter->pm_qos_req);
4758
4759 pm_runtime_put_sync(&pdev->dev);
4760
4761 return 0;
4762}
4763
4764/**
4765 * e1000_set_mac - Change the Ethernet Address of the NIC
4766 * @netdev: network interface device structure
4767 * @p: pointer to an address structure
4768 *
4769 * Returns 0 on success, negative on failure
4770 **/
4771static int e1000_set_mac(struct net_device *netdev, void *p)
4772{
4773 struct e1000_adapter *adapter = netdev_priv(netdev);
4774 struct e1000_hw *hw = &adapter->hw;
4775 struct sockaddr *addr = p;
4776
4777 if (!is_valid_ether_addr(addr->sa_data))
4778 return -EADDRNOTAVAIL;
4779
4780 eth_hw_addr_set(netdev, addr->sa_data);
4781 memcpy(adapter->hw.mac.addr, addr->sa_data, netdev->addr_len);
4782
4783 hw->mac.ops.rar_set(&adapter->hw, adapter->hw.mac.addr, 0);
4784
4785 if (adapter->flags & FLAG_RESET_OVERWRITES_LAA) {
4786 /* activate the work around */
4787 e1000e_set_laa_state_82571(&adapter->hw, 1);
4788
4789 /* Hold a copy of the LAA in RAR[14] This is done so that
4790 * between the time RAR[0] gets clobbered and the time it
4791 * gets fixed (in e1000_watchdog), the actual LAA is in one
4792 * of the RARs and no incoming packets directed to this port
4793 * are dropped. Eventually the LAA will be in RAR[0] and
4794 * RAR[14]
4795 */
4796 hw->mac.ops.rar_set(&adapter->hw, adapter->hw.mac.addr,
4797 adapter->hw.mac.rar_entry_count - 1);
4798 }
4799
4800 return 0;
4801}
4802
4803/**
4804 * e1000e_update_phy_task - work thread to update phy
4805 * @work: pointer to our work struct
4806 *
4807 * this worker thread exists because we must acquire a
4808 * semaphore to read the phy, which we could msleep while
4809 * waiting for it, and we can't msleep in a timer.
4810 **/
4811static void e1000e_update_phy_task(struct work_struct *work)
4812{
4813 struct e1000_adapter *adapter = container_of(work,
4814 struct e1000_adapter,
4815 update_phy_task);
4816 struct e1000_hw *hw = &adapter->hw;
4817
4818 if (test_bit(__E1000_DOWN, &adapter->state))
4819 return;
4820
4821 e1000_get_phy_info(hw);
4822
4823 /* Enable EEE on 82579 after link up */
4824 if (hw->phy.type >= e1000_phy_82579)
4825 e1000_set_eee_pchlan(hw);
4826}
4827
4828/**
4829 * e1000_update_phy_info - timre call-back to update PHY info
4830 * @t: pointer to timer_list containing private info adapter
4831 *
4832 * Need to wait a few seconds after link up to get diagnostic information from
4833 * the phy
4834 **/
4835static void e1000_update_phy_info(struct timer_list *t)
4836{
4837 struct e1000_adapter *adapter = from_timer(adapter, t, phy_info_timer);
4838
4839 if (test_bit(__E1000_DOWN, &adapter->state))
4840 return;
4841
4842 schedule_work(&adapter->update_phy_task);
4843}
4844
4845/**
4846 * e1000e_update_phy_stats - Update the PHY statistics counters
4847 * @adapter: board private structure
4848 *
4849 * Read/clear the upper 16-bit PHY registers and read/accumulate lower
4850 **/
4851static void e1000e_update_phy_stats(struct e1000_adapter *adapter)
4852{
4853 struct e1000_hw *hw = &adapter->hw;
4854 s32 ret_val;
4855 u16 phy_data;
4856
4857 ret_val = hw->phy.ops.acquire(hw);
4858 if (ret_val)
4859 return;
4860
4861 /* A page set is expensive so check if already on desired page.
4862 * If not, set to the page with the PHY status registers.
4863 */
4864 hw->phy.addr = 1;
4865 ret_val = e1000e_read_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT,
4866 &phy_data);
4867 if (ret_val)
4868 goto release;
4869 if (phy_data != (HV_STATS_PAGE << IGP_PAGE_SHIFT)) {
4870 ret_val = hw->phy.ops.set_page(hw,
4871 HV_STATS_PAGE << IGP_PAGE_SHIFT);
4872 if (ret_val)
4873 goto release;
4874 }
4875
4876 /* Single Collision Count */
4877 hw->phy.ops.read_reg_page(hw, HV_SCC_UPPER, &phy_data);
4878 ret_val = hw->phy.ops.read_reg_page(hw, HV_SCC_LOWER, &phy_data);
4879 if (!ret_val)
4880 adapter->stats.scc += phy_data;
4881
4882 /* Excessive Collision Count */
4883 hw->phy.ops.read_reg_page(hw, HV_ECOL_UPPER, &phy_data);
4884 ret_val = hw->phy.ops.read_reg_page(hw, HV_ECOL_LOWER, &phy_data);
4885 if (!ret_val)
4886 adapter->stats.ecol += phy_data;
4887
4888 /* Multiple Collision Count */
4889 hw->phy.ops.read_reg_page(hw, HV_MCC_UPPER, &phy_data);
4890 ret_val = hw->phy.ops.read_reg_page(hw, HV_MCC_LOWER, &phy_data);
4891 if (!ret_val)
4892 adapter->stats.mcc += phy_data;
4893
4894 /* Late Collision Count */
4895 hw->phy.ops.read_reg_page(hw, HV_LATECOL_UPPER, &phy_data);
4896 ret_val = hw->phy.ops.read_reg_page(hw, HV_LATECOL_LOWER, &phy_data);
4897 if (!ret_val)
4898 adapter->stats.latecol += phy_data;
4899
4900 /* Collision Count - also used for adaptive IFS */
4901 hw->phy.ops.read_reg_page(hw, HV_COLC_UPPER, &phy_data);
4902 ret_val = hw->phy.ops.read_reg_page(hw, HV_COLC_LOWER, &phy_data);
4903 if (!ret_val)
4904 hw->mac.collision_delta = phy_data;
4905
4906 /* Defer Count */
4907 hw->phy.ops.read_reg_page(hw, HV_DC_UPPER, &phy_data);
4908 ret_val = hw->phy.ops.read_reg_page(hw, HV_DC_LOWER, &phy_data);
4909 if (!ret_val)
4910 adapter->stats.dc += phy_data;
4911
4912 /* Transmit with no CRS */
4913 hw->phy.ops.read_reg_page(hw, HV_TNCRS_UPPER, &phy_data);
4914 ret_val = hw->phy.ops.read_reg_page(hw, HV_TNCRS_LOWER, &phy_data);
4915 if (!ret_val)
4916 adapter->stats.tncrs += phy_data;
4917
4918release:
4919 hw->phy.ops.release(hw);
4920}
4921
4922/**
4923 * e1000e_update_stats - Update the board statistics counters
4924 * @adapter: board private structure
4925 **/
4926static void e1000e_update_stats(struct e1000_adapter *adapter)
4927{
4928 struct net_device *netdev = adapter->netdev;
4929 struct e1000_hw *hw = &adapter->hw;
4930 struct pci_dev *pdev = adapter->pdev;
4931
4932 /* Prevent stats update while adapter is being reset, or if the pci
4933 * connection is down.
4934 */
4935 if (adapter->link_speed == 0)
4936 return;
4937 if (pci_channel_offline(pdev))
4938 return;
4939
4940 adapter->stats.crcerrs += er32(CRCERRS);
4941 adapter->stats.gprc += er32(GPRC);
4942 adapter->stats.gorc += er32(GORCL);
4943 er32(GORCH); /* Clear gorc */
4944 adapter->stats.bprc += er32(BPRC);
4945 adapter->stats.mprc += er32(MPRC);
4946 adapter->stats.roc += er32(ROC);
4947
4948 adapter->stats.mpc += er32(MPC);
4949
4950 /* Half-duplex statistics */
4951 if (adapter->link_duplex == HALF_DUPLEX) {
4952 if (adapter->flags2 & FLAG2_HAS_PHY_STATS) {
4953 e1000e_update_phy_stats(adapter);
4954 } else {
4955 adapter->stats.scc += er32(SCC);
4956 adapter->stats.ecol += er32(ECOL);
4957 adapter->stats.mcc += er32(MCC);
4958 adapter->stats.latecol += er32(LATECOL);
4959 adapter->stats.dc += er32(DC);
4960
4961 hw->mac.collision_delta = er32(COLC);
4962
4963 if ((hw->mac.type != e1000_82574) &&
4964 (hw->mac.type != e1000_82583))
4965 adapter->stats.tncrs += er32(TNCRS);
4966 }
4967 adapter->stats.colc += hw->mac.collision_delta;
4968 }
4969
4970 adapter->stats.xonrxc += er32(XONRXC);
4971 adapter->stats.xontxc += er32(XONTXC);
4972 adapter->stats.xoffrxc += er32(XOFFRXC);
4973 adapter->stats.xofftxc += er32(XOFFTXC);
4974 adapter->stats.gptc += er32(GPTC);
4975 adapter->stats.gotc += er32(GOTCL);
4976 er32(GOTCH); /* Clear gotc */
4977 adapter->stats.rnbc += er32(RNBC);
4978 adapter->stats.ruc += er32(RUC);
4979
4980 adapter->stats.mptc += er32(MPTC);
4981 adapter->stats.bptc += er32(BPTC);
4982
4983 /* used for adaptive IFS */
4984
4985 hw->mac.tx_packet_delta = er32(TPT);
4986 adapter->stats.tpt += hw->mac.tx_packet_delta;
4987
4988 adapter->stats.algnerrc += er32(ALGNERRC);
4989 adapter->stats.rxerrc += er32(RXERRC);
4990 adapter->stats.cexterr += er32(CEXTERR);
4991 adapter->stats.tsctc += er32(TSCTC);
4992 adapter->stats.tsctfc += er32(TSCTFC);
4993
4994 /* Fill out the OS statistics structure */
4995 netdev->stats.multicast = adapter->stats.mprc;
4996 netdev->stats.collisions = adapter->stats.colc;
4997
4998 /* Rx Errors */
4999
5000 /* RLEC on some newer hardware can be incorrect so build
5001 * our own version based on RUC and ROC
5002 */
5003 netdev->stats.rx_errors = adapter->stats.rxerrc +
5004 adapter->stats.crcerrs + adapter->stats.algnerrc +
5005 adapter->stats.ruc + adapter->stats.roc + adapter->stats.cexterr;
5006 netdev->stats.rx_length_errors = adapter->stats.ruc +
5007 adapter->stats.roc;
5008 netdev->stats.rx_crc_errors = adapter->stats.crcerrs;
5009 netdev->stats.rx_frame_errors = adapter->stats.algnerrc;
5010 netdev->stats.rx_missed_errors = adapter->stats.mpc;
5011
5012 /* Tx Errors */
5013 netdev->stats.tx_errors = adapter->stats.ecol + adapter->stats.latecol;
5014 netdev->stats.tx_aborted_errors = adapter->stats.ecol;
5015 netdev->stats.tx_window_errors = adapter->stats.latecol;
5016 netdev->stats.tx_carrier_errors = adapter->stats.tncrs;
5017
5018 /* Tx Dropped needs to be maintained elsewhere */
5019
5020 /* Management Stats */
5021 adapter->stats.mgptc += er32(MGTPTC);
5022 adapter->stats.mgprc += er32(MGTPRC);
5023 adapter->stats.mgpdc += er32(MGTPDC);
5024
5025 /* Correctable ECC Errors */
5026 if (hw->mac.type >= e1000_pch_lpt) {
5027 u32 pbeccsts = er32(PBECCSTS);
5028
5029 adapter->corr_errors +=
5030 pbeccsts & E1000_PBECCSTS_CORR_ERR_CNT_MASK;
5031 adapter->uncorr_errors +=
5032 FIELD_GET(E1000_PBECCSTS_UNCORR_ERR_CNT_MASK, pbeccsts);
5033 }
5034}
5035
5036/**
5037 * e1000_phy_read_status - Update the PHY register status snapshot
5038 * @adapter: board private structure
5039 **/
5040static void e1000_phy_read_status(struct e1000_adapter *adapter)
5041{
5042 struct e1000_hw *hw = &adapter->hw;
5043 struct e1000_phy_regs *phy = &adapter->phy_regs;
5044
5045 if (!pm_runtime_suspended((&adapter->pdev->dev)->parent) &&
5046 (er32(STATUS) & E1000_STATUS_LU) &&
5047 (adapter->hw.phy.media_type == e1000_media_type_copper)) {
5048 int ret_val;
5049
5050 ret_val = e1e_rphy(hw, MII_BMCR, &phy->bmcr);
5051 ret_val |= e1e_rphy(hw, MII_BMSR, &phy->bmsr);
5052 ret_val |= e1e_rphy(hw, MII_ADVERTISE, &phy->advertise);
5053 ret_val |= e1e_rphy(hw, MII_LPA, &phy->lpa);
5054 ret_val |= e1e_rphy(hw, MII_EXPANSION, &phy->expansion);
5055 ret_val |= e1e_rphy(hw, MII_CTRL1000, &phy->ctrl1000);
5056 ret_val |= e1e_rphy(hw, MII_STAT1000, &phy->stat1000);
5057 ret_val |= e1e_rphy(hw, MII_ESTATUS, &phy->estatus);
5058 if (ret_val)
5059 e_warn("Error reading PHY register\n");
5060 } else {
5061 /* Do not read PHY registers if link is not up
5062 * Set values to typical power-on defaults
5063 */
5064 phy->bmcr = (BMCR_SPEED1000 | BMCR_ANENABLE | BMCR_FULLDPLX);
5065 phy->bmsr = (BMSR_100FULL | BMSR_100HALF | BMSR_10FULL |
5066 BMSR_10HALF | BMSR_ESTATEN | BMSR_ANEGCAPABLE |
5067 BMSR_ERCAP);
5068 phy->advertise = (ADVERTISE_PAUSE_ASYM | ADVERTISE_PAUSE_CAP |
5069 ADVERTISE_ALL | ADVERTISE_CSMA);
5070 phy->lpa = 0;
5071 phy->expansion = EXPANSION_ENABLENPAGE;
5072 phy->ctrl1000 = ADVERTISE_1000FULL;
5073 phy->stat1000 = 0;
5074 phy->estatus = (ESTATUS_1000_TFULL | ESTATUS_1000_THALF);
5075 }
5076}
5077
5078static void e1000_print_link_info(struct e1000_adapter *adapter)
5079{
5080 struct e1000_hw *hw = &adapter->hw;
5081 u32 ctrl = er32(CTRL);
5082
5083 /* Link status message must follow this format for user tools */
5084 netdev_info(adapter->netdev,
5085 "NIC Link is Up %d Mbps %s Duplex, Flow Control: %s\n",
5086 adapter->link_speed,
5087 adapter->link_duplex == FULL_DUPLEX ? "Full" : "Half",
5088 (ctrl & E1000_CTRL_TFCE) && (ctrl & E1000_CTRL_RFCE) ? "Rx/Tx" :
5089 (ctrl & E1000_CTRL_RFCE) ? "Rx" :
5090 (ctrl & E1000_CTRL_TFCE) ? "Tx" : "None");
5091}
5092
5093static bool e1000e_has_link(struct e1000_adapter *adapter)
5094{
5095 struct e1000_hw *hw = &adapter->hw;
5096 bool link_active = false;
5097 s32 ret_val = 0;
5098
5099 /* get_link_status is set on LSC (link status) interrupt or
5100 * Rx sequence error interrupt. get_link_status will stay
5101 * true until the check_for_link establishes link
5102 * for copper adapters ONLY
5103 */
5104 switch (hw->phy.media_type) {
5105 case e1000_media_type_copper:
5106 if (hw->mac.get_link_status) {
5107 ret_val = hw->mac.ops.check_for_link(hw);
5108 link_active = !hw->mac.get_link_status;
5109 } else {
5110 link_active = true;
5111 }
5112 break;
5113 case e1000_media_type_fiber:
5114 ret_val = hw->mac.ops.check_for_link(hw);
5115 link_active = !!(er32(STATUS) & E1000_STATUS_LU);
5116 break;
5117 case e1000_media_type_internal_serdes:
5118 ret_val = hw->mac.ops.check_for_link(hw);
5119 link_active = hw->mac.serdes_has_link;
5120 break;
5121 default:
5122 case e1000_media_type_unknown:
5123 break;
5124 }
5125
5126 if ((ret_val == -E1000_ERR_PHY) && (hw->phy.type == e1000_phy_igp_3) &&
5127 (er32(CTRL) & E1000_PHY_CTRL_GBE_DISABLE)) {
5128 /* See e1000_kmrn_lock_loss_workaround_ich8lan() */
5129 e_info("Gigabit has been disabled, downgrading speed\n");
5130 }
5131
5132 return link_active;
5133}
5134
5135static void e1000e_enable_receives(struct e1000_adapter *adapter)
5136{
5137 /* make sure the receive unit is started */
5138 if ((adapter->flags & FLAG_RX_NEEDS_RESTART) &&
5139 (adapter->flags & FLAG_RESTART_NOW)) {
5140 struct e1000_hw *hw = &adapter->hw;
5141 u32 rctl = er32(RCTL);
5142
5143 ew32(RCTL, rctl | E1000_RCTL_EN);
5144 adapter->flags &= ~FLAG_RESTART_NOW;
5145 }
5146}
5147
5148static void e1000e_check_82574_phy_workaround(struct e1000_adapter *adapter)
5149{
5150 struct e1000_hw *hw = &adapter->hw;
5151
5152 /* With 82574 controllers, PHY needs to be checked periodically
5153 * for hung state and reset, if two calls return true
5154 */
5155 if (e1000_check_phy_82574(hw))
5156 adapter->phy_hang_count++;
5157 else
5158 adapter->phy_hang_count = 0;
5159
5160 if (adapter->phy_hang_count > 1) {
5161 adapter->phy_hang_count = 0;
5162 e_dbg("PHY appears hung - resetting\n");
5163 schedule_work(&adapter->reset_task);
5164 }
5165}
5166
5167/**
5168 * e1000_watchdog - Timer Call-back
5169 * @t: pointer to timer_list containing private info adapter
5170 **/
5171static void e1000_watchdog(struct timer_list *t)
5172{
5173 struct e1000_adapter *adapter = from_timer(adapter, t, watchdog_timer);
5174
5175 /* Do the rest outside of interrupt context */
5176 schedule_work(&adapter->watchdog_task);
5177
5178 /* TODO: make this use queue_delayed_work() */
5179}
5180
5181static void e1000_watchdog_task(struct work_struct *work)
5182{
5183 struct e1000_adapter *adapter = container_of(work,
5184 struct e1000_adapter,
5185 watchdog_task);
5186 struct net_device *netdev = adapter->netdev;
5187 struct e1000_mac_info *mac = &adapter->hw.mac;
5188 struct e1000_phy_info *phy = &adapter->hw.phy;
5189 struct e1000_ring *tx_ring = adapter->tx_ring;
5190 u32 dmoff_exit_timeout = 100, tries = 0;
5191 struct e1000_hw *hw = &adapter->hw;
5192 u32 link, tctl, pcim_state;
5193
5194 if (test_bit(__E1000_DOWN, &adapter->state))
5195 return;
5196
5197 link = e1000e_has_link(adapter);
5198 if ((netif_carrier_ok(netdev)) && link) {
5199 /* Cancel scheduled suspend requests. */
5200 pm_runtime_resume(netdev->dev.parent);
5201
5202 e1000e_enable_receives(adapter);
5203 goto link_up;
5204 }
5205
5206 if ((e1000e_enable_tx_pkt_filtering(hw)) &&
5207 (adapter->mng_vlan_id != adapter->hw.mng_cookie.vlan_id))
5208 e1000_update_mng_vlan(adapter);
5209
5210 if (link) {
5211 if (!netif_carrier_ok(netdev)) {
5212 bool txb2b = true;
5213
5214 /* Cancel scheduled suspend requests. */
5215 pm_runtime_resume(netdev->dev.parent);
5216
5217 /* Checking if MAC is in DMoff state*/
5218 if (er32(FWSM) & E1000_ICH_FWSM_FW_VALID) {
5219 pcim_state = er32(STATUS);
5220 while (pcim_state & E1000_STATUS_PCIM_STATE) {
5221 if (tries++ == dmoff_exit_timeout) {
5222 e_dbg("Error in exiting dmoff\n");
5223 break;
5224 }
5225 usleep_range(10000, 20000);
5226 pcim_state = er32(STATUS);
5227
5228 /* Checking if MAC exited DMoff state */
5229 if (!(pcim_state & E1000_STATUS_PCIM_STATE))
5230 e1000_phy_hw_reset(&adapter->hw);
5231 }
5232 }
5233
5234 /* update snapshot of PHY registers on LSC */
5235 e1000_phy_read_status(adapter);
5236 mac->ops.get_link_up_info(&adapter->hw,
5237 &adapter->link_speed,
5238 &adapter->link_duplex);
5239 e1000_print_link_info(adapter);
5240
5241 /* check if SmartSpeed worked */
5242 e1000e_check_downshift(hw);
5243 if (phy->speed_downgraded)
5244 netdev_warn(netdev,
5245 "Link Speed was downgraded by SmartSpeed\n");
5246
5247 /* On supported PHYs, check for duplex mismatch only
5248 * if link has autonegotiated at 10/100 half
5249 */
5250 if ((hw->phy.type == e1000_phy_igp_3 ||
5251 hw->phy.type == e1000_phy_bm) &&
5252 hw->mac.autoneg &&
5253 (adapter->link_speed == SPEED_10 ||
5254 adapter->link_speed == SPEED_100) &&
5255 (adapter->link_duplex == HALF_DUPLEX)) {
5256 u16 autoneg_exp;
5257
5258 e1e_rphy(hw, MII_EXPANSION, &autoneg_exp);
5259
5260 if (!(autoneg_exp & EXPANSION_NWAY))
5261 e_info("Autonegotiated half duplex but link partner cannot autoneg. Try forcing full duplex if link gets many collisions.\n");
5262 }
5263
5264 /* adjust timeout factor according to speed/duplex */
5265 adapter->tx_timeout_factor = 1;
5266 switch (adapter->link_speed) {
5267 case SPEED_10:
5268 txb2b = false;
5269 adapter->tx_timeout_factor = 16;
5270 break;
5271 case SPEED_100:
5272 txb2b = false;
5273 adapter->tx_timeout_factor = 10;
5274 break;
5275 }
5276
5277 /* workaround: re-program speed mode bit after
5278 * link-up event
5279 */
5280 if ((adapter->flags & FLAG_TARC_SPEED_MODE_BIT) &&
5281 !txb2b) {
5282 u32 tarc0;
5283
5284 tarc0 = er32(TARC(0));
5285 tarc0 &= ~SPEED_MODE_BIT;
5286 ew32(TARC(0), tarc0);
5287 }
5288
5289 /* enable transmits in the hardware, need to do this
5290 * after setting TARC(0)
5291 */
5292 tctl = er32(TCTL);
5293 tctl |= E1000_TCTL_EN;
5294 ew32(TCTL, tctl);
5295
5296 /* Perform any post-link-up configuration before
5297 * reporting link up.
5298 */
5299 if (phy->ops.cfg_on_link_up)
5300 phy->ops.cfg_on_link_up(hw);
5301
5302 netif_wake_queue(netdev);
5303 netif_carrier_on(netdev);
5304
5305 if (!test_bit(__E1000_DOWN, &adapter->state))
5306 mod_timer(&adapter->phy_info_timer,
5307 round_jiffies(jiffies + 2 * HZ));
5308 }
5309 } else {
5310 if (netif_carrier_ok(netdev)) {
5311 adapter->link_speed = 0;
5312 adapter->link_duplex = 0;
5313 /* Link status message must follow this format */
5314 netdev_info(netdev, "NIC Link is Down\n");
5315 netif_carrier_off(netdev);
5316 netif_stop_queue(netdev);
5317 if (!test_bit(__E1000_DOWN, &adapter->state))
5318 mod_timer(&adapter->phy_info_timer,
5319 round_jiffies(jiffies + 2 * HZ));
5320
5321 /* 8000ES2LAN requires a Rx packet buffer work-around
5322 * on link down event; reset the controller to flush
5323 * the Rx packet buffer.
5324 */
5325 if (adapter->flags & FLAG_RX_NEEDS_RESTART)
5326 adapter->flags |= FLAG_RESTART_NOW;
5327 else
5328 pm_schedule_suspend(netdev->dev.parent,
5329 LINK_TIMEOUT);
5330 }
5331 }
5332
5333link_up:
5334 spin_lock(&adapter->stats64_lock);
5335 e1000e_update_stats(adapter);
5336
5337 mac->tx_packet_delta = adapter->stats.tpt - adapter->tpt_old;
5338 adapter->tpt_old = adapter->stats.tpt;
5339 mac->collision_delta = adapter->stats.colc - adapter->colc_old;
5340 adapter->colc_old = adapter->stats.colc;
5341
5342 adapter->gorc = adapter->stats.gorc - adapter->gorc_old;
5343 adapter->gorc_old = adapter->stats.gorc;
5344 adapter->gotc = adapter->stats.gotc - adapter->gotc_old;
5345 adapter->gotc_old = adapter->stats.gotc;
5346 spin_unlock(&adapter->stats64_lock);
5347
5348 /* If the link is lost the controller stops DMA, but
5349 * if there is queued Tx work it cannot be done. So
5350 * reset the controller to flush the Tx packet buffers.
5351 */
5352 if (!netif_carrier_ok(netdev) &&
5353 (e1000_desc_unused(tx_ring) + 1 < tx_ring->count))
5354 adapter->flags |= FLAG_RESTART_NOW;
5355
5356 /* If reset is necessary, do it outside of interrupt context. */
5357 if (adapter->flags & FLAG_RESTART_NOW) {
5358 schedule_work(&adapter->reset_task);
5359 /* return immediately since reset is imminent */
5360 return;
5361 }
5362
5363 e1000e_update_adaptive(&adapter->hw);
5364
5365 /* Simple mode for Interrupt Throttle Rate (ITR) */
5366 if (adapter->itr_setting == 4) {
5367 /* Symmetric Tx/Rx gets a reduced ITR=2000;
5368 * Total asymmetrical Tx or Rx gets ITR=8000;
5369 * everyone else is between 2000-8000.
5370 */
5371 u32 goc = (adapter->gotc + adapter->gorc) / 10000;
5372 u32 dif = (adapter->gotc > adapter->gorc ?
5373 adapter->gotc - adapter->gorc :
5374 adapter->gorc - adapter->gotc) / 10000;
5375 u32 itr = goc > 0 ? (dif * 6000 / goc + 2000) : 8000;
5376
5377 e1000e_write_itr(adapter, itr);
5378 }
5379
5380 /* Cause software interrupt to ensure Rx ring is cleaned */
5381 if (adapter->msix_entries)
5382 ew32(ICS, adapter->rx_ring->ims_val);
5383 else
5384 ew32(ICS, E1000_ICS_RXDMT0);
5385
5386 /* flush pending descriptors to memory before detecting Tx hang */
5387 e1000e_flush_descriptors(adapter);
5388
5389 /* Force detection of hung controller every watchdog period */
5390 adapter->detect_tx_hung = true;
5391
5392 /* With 82571 controllers, LAA may be overwritten due to controller
5393 * reset from the other port. Set the appropriate LAA in RAR[0]
5394 */
5395 if (e1000e_get_laa_state_82571(hw))
5396 hw->mac.ops.rar_set(hw, adapter->hw.mac.addr, 0);
5397
5398 if (adapter->flags2 & FLAG2_CHECK_PHY_HANG)
5399 e1000e_check_82574_phy_workaround(adapter);
5400
5401 /* Clear valid timestamp stuck in RXSTMPL/H due to a Rx error */
5402 if (adapter->hwtstamp_config.rx_filter != HWTSTAMP_FILTER_NONE) {
5403 if ((adapter->flags2 & FLAG2_CHECK_RX_HWTSTAMP) &&
5404 (er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_VALID)) {
5405 er32(RXSTMPH);
5406 adapter->rx_hwtstamp_cleared++;
5407 } else {
5408 adapter->flags2 |= FLAG2_CHECK_RX_HWTSTAMP;
5409 }
5410 }
5411
5412 /* Reset the timer */
5413 if (!test_bit(__E1000_DOWN, &adapter->state))
5414 mod_timer(&adapter->watchdog_timer,
5415 round_jiffies(jiffies + 2 * HZ));
5416}
5417
5418#define E1000_TX_FLAGS_CSUM 0x00000001
5419#define E1000_TX_FLAGS_VLAN 0x00000002
5420#define E1000_TX_FLAGS_TSO 0x00000004
5421#define E1000_TX_FLAGS_IPV4 0x00000008
5422#define E1000_TX_FLAGS_NO_FCS 0x00000010
5423#define E1000_TX_FLAGS_HWTSTAMP 0x00000020
5424#define E1000_TX_FLAGS_VLAN_MASK 0xffff0000
5425#define E1000_TX_FLAGS_VLAN_SHIFT 16
5426
5427static int e1000_tso(struct e1000_ring *tx_ring, struct sk_buff *skb,
5428 __be16 protocol)
5429{
5430 struct e1000_context_desc *context_desc;
5431 struct e1000_buffer *buffer_info;
5432 unsigned int i;
5433 u32 cmd_length = 0;
5434 u16 ipcse = 0, mss;
5435 u8 ipcss, ipcso, tucss, tucso, hdr_len;
5436 int err;
5437
5438 if (!skb_is_gso(skb))
5439 return 0;
5440
5441 err = skb_cow_head(skb, 0);
5442 if (err < 0)
5443 return err;
5444
5445 hdr_len = skb_tcp_all_headers(skb);
5446 mss = skb_shinfo(skb)->gso_size;
5447 if (protocol == htons(ETH_P_IP)) {
5448 struct iphdr *iph = ip_hdr(skb);
5449 iph->tot_len = 0;
5450 iph->check = 0;
5451 tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr, iph->daddr,
5452 0, IPPROTO_TCP, 0);
5453 cmd_length = E1000_TXD_CMD_IP;
5454 ipcse = skb_transport_offset(skb) - 1;
5455 } else if (skb_is_gso_v6(skb)) {
5456 tcp_v6_gso_csum_prep(skb);
5457 ipcse = 0;
5458 }
5459 ipcss = skb_network_offset(skb);
5460 ipcso = (void *)&(ip_hdr(skb)->check) - (void *)skb->data;
5461 tucss = skb_transport_offset(skb);
5462 tucso = (void *)&(tcp_hdr(skb)->check) - (void *)skb->data;
5463
5464 cmd_length |= (E1000_TXD_CMD_DEXT | E1000_TXD_CMD_TSE |
5465 E1000_TXD_CMD_TCP | (skb->len - (hdr_len)));
5466
5467 i = tx_ring->next_to_use;
5468 context_desc = E1000_CONTEXT_DESC(*tx_ring, i);
5469 buffer_info = &tx_ring->buffer_info[i];
5470
5471 context_desc->lower_setup.ip_fields.ipcss = ipcss;
5472 context_desc->lower_setup.ip_fields.ipcso = ipcso;
5473 context_desc->lower_setup.ip_fields.ipcse = cpu_to_le16(ipcse);
5474 context_desc->upper_setup.tcp_fields.tucss = tucss;
5475 context_desc->upper_setup.tcp_fields.tucso = tucso;
5476 context_desc->upper_setup.tcp_fields.tucse = 0;
5477 context_desc->tcp_seg_setup.fields.mss = cpu_to_le16(mss);
5478 context_desc->tcp_seg_setup.fields.hdr_len = hdr_len;
5479 context_desc->cmd_and_length = cpu_to_le32(cmd_length);
5480
5481 buffer_info->time_stamp = jiffies;
5482 buffer_info->next_to_watch = i;
5483
5484 i++;
5485 if (i == tx_ring->count)
5486 i = 0;
5487 tx_ring->next_to_use = i;
5488
5489 return 1;
5490}
5491
5492static bool e1000_tx_csum(struct e1000_ring *tx_ring, struct sk_buff *skb,
5493 __be16 protocol)
5494{
5495 struct e1000_adapter *adapter = tx_ring->adapter;
5496 struct e1000_context_desc *context_desc;
5497 struct e1000_buffer *buffer_info;
5498 unsigned int i;
5499 u8 css;
5500 u32 cmd_len = E1000_TXD_CMD_DEXT;
5501
5502 if (skb->ip_summed != CHECKSUM_PARTIAL)
5503 return false;
5504
5505 switch (protocol) {
5506 case cpu_to_be16(ETH_P_IP):
5507 if (ip_hdr(skb)->protocol == IPPROTO_TCP)
5508 cmd_len |= E1000_TXD_CMD_TCP;
5509 break;
5510 case cpu_to_be16(ETH_P_IPV6):
5511 /* XXX not handling all IPV6 headers */
5512 if (ipv6_hdr(skb)->nexthdr == IPPROTO_TCP)
5513 cmd_len |= E1000_TXD_CMD_TCP;
5514 break;
5515 default:
5516 if (unlikely(net_ratelimit()))
5517 e_warn("checksum_partial proto=%x!\n",
5518 be16_to_cpu(protocol));
5519 break;
5520 }
5521
5522 css = skb_checksum_start_offset(skb);
5523
5524 i = tx_ring->next_to_use;
5525 buffer_info = &tx_ring->buffer_info[i];
5526 context_desc = E1000_CONTEXT_DESC(*tx_ring, i);
5527
5528 context_desc->lower_setup.ip_config = 0;
5529 context_desc->upper_setup.tcp_fields.tucss = css;
5530 context_desc->upper_setup.tcp_fields.tucso = css + skb->csum_offset;
5531 context_desc->upper_setup.tcp_fields.tucse = 0;
5532 context_desc->tcp_seg_setup.data = 0;
5533 context_desc->cmd_and_length = cpu_to_le32(cmd_len);
5534
5535 buffer_info->time_stamp = jiffies;
5536 buffer_info->next_to_watch = i;
5537
5538 i++;
5539 if (i == tx_ring->count)
5540 i = 0;
5541 tx_ring->next_to_use = i;
5542
5543 return true;
5544}
5545
5546static int e1000_tx_map(struct e1000_ring *tx_ring, struct sk_buff *skb,
5547 unsigned int first, unsigned int max_per_txd,
5548 unsigned int nr_frags)
5549{
5550 struct e1000_adapter *adapter = tx_ring->adapter;
5551 struct pci_dev *pdev = adapter->pdev;
5552 struct e1000_buffer *buffer_info;
5553 unsigned int len = skb_headlen(skb);
5554 unsigned int offset = 0, size, count = 0, i;
5555 unsigned int f, bytecount, segs;
5556
5557 i = tx_ring->next_to_use;
5558
5559 while (len) {
5560 buffer_info = &tx_ring->buffer_info[i];
5561 size = min(len, max_per_txd);
5562
5563 buffer_info->length = size;
5564 buffer_info->time_stamp = jiffies;
5565 buffer_info->next_to_watch = i;
5566 buffer_info->dma = dma_map_single(&pdev->dev,
5567 skb->data + offset,
5568 size, DMA_TO_DEVICE);
5569 buffer_info->mapped_as_page = false;
5570 if (dma_mapping_error(&pdev->dev, buffer_info->dma))
5571 goto dma_error;
5572
5573 len -= size;
5574 offset += size;
5575 count++;
5576
5577 if (len) {
5578 i++;
5579 if (i == tx_ring->count)
5580 i = 0;
5581 }
5582 }
5583
5584 for (f = 0; f < nr_frags; f++) {
5585 const skb_frag_t *frag = &skb_shinfo(skb)->frags[f];
5586
5587 len = skb_frag_size(frag);
5588 offset = 0;
5589
5590 while (len) {
5591 i++;
5592 if (i == tx_ring->count)
5593 i = 0;
5594
5595 buffer_info = &tx_ring->buffer_info[i];
5596 size = min(len, max_per_txd);
5597
5598 buffer_info->length = size;
5599 buffer_info->time_stamp = jiffies;
5600 buffer_info->next_to_watch = i;
5601 buffer_info->dma = skb_frag_dma_map(&pdev->dev, frag,
5602 offset, size,
5603 DMA_TO_DEVICE);
5604 buffer_info->mapped_as_page = true;
5605 if (dma_mapping_error(&pdev->dev, buffer_info->dma))
5606 goto dma_error;
5607
5608 len -= size;
5609 offset += size;
5610 count++;
5611 }
5612 }
5613
5614 segs = skb_shinfo(skb)->gso_segs ? : 1;
5615 /* multiply data chunks by size of headers */
5616 bytecount = ((segs - 1) * skb_headlen(skb)) + skb->len;
5617
5618 tx_ring->buffer_info[i].skb = skb;
5619 tx_ring->buffer_info[i].segs = segs;
5620 tx_ring->buffer_info[i].bytecount = bytecount;
5621 tx_ring->buffer_info[first].next_to_watch = i;
5622
5623 return count;
5624
5625dma_error:
5626 dev_err(&pdev->dev, "Tx DMA map failed\n");
5627 buffer_info->dma = 0;
5628 if (count)
5629 count--;
5630
5631 while (count--) {
5632 if (i == 0)
5633 i += tx_ring->count;
5634 i--;
5635 buffer_info = &tx_ring->buffer_info[i];
5636 e1000_put_txbuf(tx_ring, buffer_info, true);
5637 }
5638
5639 return 0;
5640}
5641
5642static void e1000_tx_queue(struct e1000_ring *tx_ring, int tx_flags, int count)
5643{
5644 struct e1000_adapter *adapter = tx_ring->adapter;
5645 struct e1000_tx_desc *tx_desc = NULL;
5646 struct e1000_buffer *buffer_info;
5647 u32 txd_upper = 0, txd_lower = E1000_TXD_CMD_IFCS;
5648 unsigned int i;
5649
5650 if (tx_flags & E1000_TX_FLAGS_TSO) {
5651 txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D |
5652 E1000_TXD_CMD_TSE;
5653 txd_upper |= E1000_TXD_POPTS_TXSM << 8;
5654
5655 if (tx_flags & E1000_TX_FLAGS_IPV4)
5656 txd_upper |= E1000_TXD_POPTS_IXSM << 8;
5657 }
5658
5659 if (tx_flags & E1000_TX_FLAGS_CSUM) {
5660 txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D;
5661 txd_upper |= E1000_TXD_POPTS_TXSM << 8;
5662 }
5663
5664 if (tx_flags & E1000_TX_FLAGS_VLAN) {
5665 txd_lower |= E1000_TXD_CMD_VLE;
5666 txd_upper |= (tx_flags & E1000_TX_FLAGS_VLAN_MASK);
5667 }
5668
5669 if (unlikely(tx_flags & E1000_TX_FLAGS_NO_FCS))
5670 txd_lower &= ~(E1000_TXD_CMD_IFCS);
5671
5672 if (unlikely(tx_flags & E1000_TX_FLAGS_HWTSTAMP)) {
5673 txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D;
5674 txd_upper |= E1000_TXD_EXTCMD_TSTAMP;
5675 }
5676
5677 i = tx_ring->next_to_use;
5678
5679 do {
5680 buffer_info = &tx_ring->buffer_info[i];
5681 tx_desc = E1000_TX_DESC(*tx_ring, i);
5682 tx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
5683 tx_desc->lower.data = cpu_to_le32(txd_lower |
5684 buffer_info->length);
5685 tx_desc->upper.data = cpu_to_le32(txd_upper);
5686
5687 i++;
5688 if (i == tx_ring->count)
5689 i = 0;
5690 } while (--count > 0);
5691
5692 tx_desc->lower.data |= cpu_to_le32(adapter->txd_cmd);
5693
5694 /* txd_cmd re-enables FCS, so we'll re-disable it here as desired. */
5695 if (unlikely(tx_flags & E1000_TX_FLAGS_NO_FCS))
5696 tx_desc->lower.data &= ~(cpu_to_le32(E1000_TXD_CMD_IFCS));
5697
5698 /* Force memory writes to complete before letting h/w
5699 * know there are new descriptors to fetch. (Only
5700 * applicable for weak-ordered memory model archs,
5701 * such as IA-64).
5702 */
5703 wmb();
5704
5705 tx_ring->next_to_use = i;
5706}
5707
5708#define MINIMUM_DHCP_PACKET_SIZE 282
5709static int e1000_transfer_dhcp_info(struct e1000_adapter *adapter,
5710 struct sk_buff *skb)
5711{
5712 struct e1000_hw *hw = &adapter->hw;
5713 u16 length, offset;
5714
5715 if (skb_vlan_tag_present(skb) &&
5716 !((skb_vlan_tag_get(skb) == adapter->hw.mng_cookie.vlan_id) &&
5717 (adapter->hw.mng_cookie.status &
5718 E1000_MNG_DHCP_COOKIE_STATUS_VLAN)))
5719 return 0;
5720
5721 if (skb->len <= MINIMUM_DHCP_PACKET_SIZE)
5722 return 0;
5723
5724 if (((struct ethhdr *)skb->data)->h_proto != htons(ETH_P_IP))
5725 return 0;
5726
5727 {
5728 const struct iphdr *ip = (struct iphdr *)((u8 *)skb->data + 14);
5729 struct udphdr *udp;
5730
5731 if (ip->protocol != IPPROTO_UDP)
5732 return 0;
5733
5734 udp = (struct udphdr *)((u8 *)ip + (ip->ihl << 2));
5735 if (ntohs(udp->dest) != 67)
5736 return 0;
5737
5738 offset = (u8 *)udp + 8 - skb->data;
5739 length = skb->len - offset;
5740 return e1000e_mng_write_dhcp_info(hw, (u8 *)udp + 8, length);
5741 }
5742
5743 return 0;
5744}
5745
5746static int __e1000_maybe_stop_tx(struct e1000_ring *tx_ring, int size)
5747{
5748 struct e1000_adapter *adapter = tx_ring->adapter;
5749
5750 netif_stop_queue(adapter->netdev);
5751 /* Herbert's original patch had:
5752 * smp_mb__after_netif_stop_queue();
5753 * but since that doesn't exist yet, just open code it.
5754 */
5755 smp_mb();
5756
5757 /* We need to check again in a case another CPU has just
5758 * made room available.
5759 */
5760 if (e1000_desc_unused(tx_ring) < size)
5761 return -EBUSY;
5762
5763 /* A reprieve! */
5764 netif_start_queue(adapter->netdev);
5765 ++adapter->restart_queue;
5766 return 0;
5767}
5768
5769static int e1000_maybe_stop_tx(struct e1000_ring *tx_ring, int size)
5770{
5771 BUG_ON(size > tx_ring->count);
5772
5773 if (e1000_desc_unused(tx_ring) >= size)
5774 return 0;
5775 return __e1000_maybe_stop_tx(tx_ring, size);
5776}
5777
5778static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
5779 struct net_device *netdev)
5780{
5781 struct e1000_adapter *adapter = netdev_priv(netdev);
5782 struct e1000_ring *tx_ring = adapter->tx_ring;
5783 unsigned int first;
5784 unsigned int tx_flags = 0;
5785 unsigned int len = skb_headlen(skb);
5786 unsigned int nr_frags;
5787 unsigned int mss;
5788 int count = 0;
5789 int tso;
5790 unsigned int f;
5791 __be16 protocol = vlan_get_protocol(skb);
5792
5793 if (test_bit(__E1000_DOWN, &adapter->state)) {
5794 dev_kfree_skb_any(skb);
5795 return NETDEV_TX_OK;
5796 }
5797
5798 if (skb->len <= 0) {
5799 dev_kfree_skb_any(skb);
5800 return NETDEV_TX_OK;
5801 }
5802
5803 /* The minimum packet size with TCTL.PSP set is 17 bytes so
5804 * pad skb in order to meet this minimum size requirement
5805 */
5806 if (skb_put_padto(skb, 17))
5807 return NETDEV_TX_OK;
5808
5809 mss = skb_shinfo(skb)->gso_size;
5810 if (mss) {
5811 u8 hdr_len;
5812
5813 /* TSO Workaround for 82571/2/3 Controllers -- if skb->data
5814 * points to just header, pull a few bytes of payload from
5815 * frags into skb->data
5816 */
5817 hdr_len = skb_tcp_all_headers(skb);
5818 /* we do this workaround for ES2LAN, but it is un-necessary,
5819 * avoiding it could save a lot of cycles
5820 */
5821 if (skb->data_len && (hdr_len == len)) {
5822 unsigned int pull_size;
5823
5824 pull_size = min_t(unsigned int, 4, skb->data_len);
5825 if (!__pskb_pull_tail(skb, pull_size)) {
5826 e_err("__pskb_pull_tail failed.\n");
5827 dev_kfree_skb_any(skb);
5828 return NETDEV_TX_OK;
5829 }
5830 len = skb_headlen(skb);
5831 }
5832 }
5833
5834 /* reserve a descriptor for the offload context */
5835 if ((mss) || (skb->ip_summed == CHECKSUM_PARTIAL))
5836 count++;
5837 count++;
5838
5839 count += DIV_ROUND_UP(len, adapter->tx_fifo_limit);
5840
5841 nr_frags = skb_shinfo(skb)->nr_frags;
5842 for (f = 0; f < nr_frags; f++)
5843 count += DIV_ROUND_UP(skb_frag_size(&skb_shinfo(skb)->frags[f]),
5844 adapter->tx_fifo_limit);
5845
5846 if (adapter->hw.mac.tx_pkt_filtering)
5847 e1000_transfer_dhcp_info(adapter, skb);
5848
5849 /* need: count + 2 desc gap to keep tail from touching
5850 * head, otherwise try next time
5851 */
5852 if (e1000_maybe_stop_tx(tx_ring, count + 2))
5853 return NETDEV_TX_BUSY;
5854
5855 if (skb_vlan_tag_present(skb)) {
5856 tx_flags |= E1000_TX_FLAGS_VLAN;
5857 tx_flags |= (skb_vlan_tag_get(skb) <<
5858 E1000_TX_FLAGS_VLAN_SHIFT);
5859 }
5860
5861 first = tx_ring->next_to_use;
5862
5863 tso = e1000_tso(tx_ring, skb, protocol);
5864 if (tso < 0) {
5865 dev_kfree_skb_any(skb);
5866 return NETDEV_TX_OK;
5867 }
5868
5869 if (tso)
5870 tx_flags |= E1000_TX_FLAGS_TSO;
5871 else if (e1000_tx_csum(tx_ring, skb, protocol))
5872 tx_flags |= E1000_TX_FLAGS_CSUM;
5873
5874 /* Old method was to assume IPv4 packet by default if TSO was enabled.
5875 * 82571 hardware supports TSO capabilities for IPv6 as well...
5876 * no longer assume, we must.
5877 */
5878 if (protocol == htons(ETH_P_IP))
5879 tx_flags |= E1000_TX_FLAGS_IPV4;
5880
5881 if (unlikely(skb->no_fcs))
5882 tx_flags |= E1000_TX_FLAGS_NO_FCS;
5883
5884 /* if count is 0 then mapping error has occurred */
5885 count = e1000_tx_map(tx_ring, skb, first, adapter->tx_fifo_limit,
5886 nr_frags);
5887 if (count) {
5888 if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) &&
5889 (adapter->flags & FLAG_HAS_HW_TIMESTAMP)) {
5890 if (!adapter->tx_hwtstamp_skb) {
5891 skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
5892 tx_flags |= E1000_TX_FLAGS_HWTSTAMP;
5893 adapter->tx_hwtstamp_skb = skb_get(skb);
5894 adapter->tx_hwtstamp_start = jiffies;
5895 schedule_work(&adapter->tx_hwtstamp_work);
5896 } else {
5897 adapter->tx_hwtstamp_skipped++;
5898 }
5899 }
5900
5901 skb_tx_timestamp(skb);
5902
5903 netdev_sent_queue(netdev, skb->len);
5904 e1000_tx_queue(tx_ring, tx_flags, count);
5905 /* Make sure there is space in the ring for the next send. */
5906 e1000_maybe_stop_tx(tx_ring,
5907 ((MAX_SKB_FRAGS + 1) *
5908 DIV_ROUND_UP(PAGE_SIZE,
5909 adapter->tx_fifo_limit) + 4));
5910
5911 if (!netdev_xmit_more() ||
5912 netif_xmit_stopped(netdev_get_tx_queue(netdev, 0))) {
5913 if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA)
5914 e1000e_update_tdt_wa(tx_ring,
5915 tx_ring->next_to_use);
5916 else
5917 writel(tx_ring->next_to_use, tx_ring->tail);
5918 }
5919 } else {
5920 dev_kfree_skb_any(skb);
5921 tx_ring->buffer_info[first].time_stamp = 0;
5922 tx_ring->next_to_use = first;
5923 }
5924
5925 return NETDEV_TX_OK;
5926}
5927
5928/**
5929 * e1000_tx_timeout - Respond to a Tx Hang
5930 * @netdev: network interface device structure
5931 * @txqueue: index of the hung queue (unused)
5932 **/
5933static void e1000_tx_timeout(struct net_device *netdev, unsigned int __always_unused txqueue)
5934{
5935 struct e1000_adapter *adapter = netdev_priv(netdev);
5936
5937 /* Do the reset outside of interrupt context */
5938 adapter->tx_timeout_count++;
5939 schedule_work(&adapter->reset_task);
5940}
5941
5942static void e1000_reset_task(struct work_struct *work)
5943{
5944 struct e1000_adapter *adapter;
5945 adapter = container_of(work, struct e1000_adapter, reset_task);
5946
5947 rtnl_lock();
5948 /* don't run the task if already down */
5949 if (test_bit(__E1000_DOWN, &adapter->state)) {
5950 rtnl_unlock();
5951 return;
5952 }
5953
5954 if (!(adapter->flags & FLAG_RESTART_NOW)) {
5955 e1000e_dump(adapter);
5956 e_err("Reset adapter unexpectedly\n");
5957 }
5958 e1000e_reinit_locked(adapter);
5959 rtnl_unlock();
5960}
5961
5962/**
5963 * e1000e_get_stats64 - Get System Network Statistics
5964 * @netdev: network interface device structure
5965 * @stats: rtnl_link_stats64 pointer
5966 *
5967 * Returns the address of the device statistics structure.
5968 **/
5969void e1000e_get_stats64(struct net_device *netdev,
5970 struct rtnl_link_stats64 *stats)
5971{
5972 struct e1000_adapter *adapter = netdev_priv(netdev);
5973
5974 spin_lock(&adapter->stats64_lock);
5975 e1000e_update_stats(adapter);
5976 /* Fill out the OS statistics structure */
5977 stats->rx_bytes = adapter->stats.gorc;
5978 stats->rx_packets = adapter->stats.gprc;
5979 stats->tx_bytes = adapter->stats.gotc;
5980 stats->tx_packets = adapter->stats.gptc;
5981 stats->multicast = adapter->stats.mprc;
5982 stats->collisions = adapter->stats.colc;
5983
5984 /* Rx Errors */
5985
5986 /* RLEC on some newer hardware can be incorrect so build
5987 * our own version based on RUC and ROC
5988 */
5989 stats->rx_errors = adapter->stats.rxerrc +
5990 adapter->stats.crcerrs + adapter->stats.algnerrc +
5991 adapter->stats.ruc + adapter->stats.roc + adapter->stats.cexterr;
5992 stats->rx_length_errors = adapter->stats.ruc + adapter->stats.roc;
5993 stats->rx_crc_errors = adapter->stats.crcerrs;
5994 stats->rx_frame_errors = adapter->stats.algnerrc;
5995 stats->rx_missed_errors = adapter->stats.mpc;
5996
5997 /* Tx Errors */
5998 stats->tx_errors = adapter->stats.ecol + adapter->stats.latecol;
5999 stats->tx_aborted_errors = adapter->stats.ecol;
6000 stats->tx_window_errors = adapter->stats.latecol;
6001 stats->tx_carrier_errors = adapter->stats.tncrs;
6002
6003 /* Tx Dropped needs to be maintained elsewhere */
6004
6005 spin_unlock(&adapter->stats64_lock);
6006}
6007
6008/**
6009 * e1000_change_mtu - Change the Maximum Transfer Unit
6010 * @netdev: network interface device structure
6011 * @new_mtu: new value for maximum frame size
6012 *
6013 * Returns 0 on success, negative on failure
6014 **/
6015static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
6016{
6017 struct e1000_adapter *adapter = netdev_priv(netdev);
6018 int max_frame = new_mtu + VLAN_ETH_HLEN + ETH_FCS_LEN;
6019
6020 /* Jumbo frame support */
6021 if ((new_mtu > ETH_DATA_LEN) &&
6022 !(adapter->flags & FLAG_HAS_JUMBO_FRAMES)) {
6023 e_err("Jumbo Frames not supported.\n");
6024 return -EINVAL;
6025 }
6026
6027 /* Jumbo frame workaround on 82579 and newer requires CRC be stripped */
6028 if ((adapter->hw.mac.type >= e1000_pch2lan) &&
6029 !(adapter->flags2 & FLAG2_CRC_STRIPPING) &&
6030 (new_mtu > ETH_DATA_LEN)) {
6031 e_err("Jumbo Frames not supported on this device when CRC stripping is disabled.\n");
6032 return -EINVAL;
6033 }
6034
6035 while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
6036 usleep_range(1000, 1100);
6037 /* e1000e_down -> e1000e_reset dependent on max_frame_size & mtu */
6038 adapter->max_frame_size = max_frame;
6039 netdev_dbg(netdev, "changing MTU from %d to %d\n",
6040 netdev->mtu, new_mtu);
6041 netdev->mtu = new_mtu;
6042
6043 pm_runtime_get_sync(netdev->dev.parent);
6044
6045 if (netif_running(netdev))
6046 e1000e_down(adapter, true);
6047
6048 /* NOTE: netdev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN
6049 * means we reserve 2 more, this pushes us to allocate from the next
6050 * larger slab size.
6051 * i.e. RXBUFFER_2048 --> size-4096 slab
6052 * However with the new *_jumbo_rx* routines, jumbo receives will use
6053 * fragmented skbs
6054 */
6055
6056 if (max_frame <= 2048)
6057 adapter->rx_buffer_len = 2048;
6058 else
6059 adapter->rx_buffer_len = 4096;
6060
6061 /* adjust allocation if LPE protects us, and we aren't using SBP */
6062 if (max_frame <= (VLAN_ETH_FRAME_LEN + ETH_FCS_LEN))
6063 adapter->rx_buffer_len = VLAN_ETH_FRAME_LEN + ETH_FCS_LEN;
6064
6065 if (netif_running(netdev))
6066 e1000e_up(adapter);
6067 else
6068 e1000e_reset(adapter);
6069
6070 pm_runtime_put_sync(netdev->dev.parent);
6071
6072 clear_bit(__E1000_RESETTING, &adapter->state);
6073
6074 return 0;
6075}
6076
6077static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr,
6078 int cmd)
6079{
6080 struct e1000_adapter *adapter = netdev_priv(netdev);
6081 struct mii_ioctl_data *data = if_mii(ifr);
6082
6083 if (adapter->hw.phy.media_type != e1000_media_type_copper)
6084 return -EOPNOTSUPP;
6085
6086 switch (cmd) {
6087 case SIOCGMIIPHY:
6088 data->phy_id = adapter->hw.phy.addr;
6089 break;
6090 case SIOCGMIIREG:
6091 e1000_phy_read_status(adapter);
6092
6093 switch (data->reg_num & 0x1F) {
6094 case MII_BMCR:
6095 data->val_out = adapter->phy_regs.bmcr;
6096 break;
6097 case MII_BMSR:
6098 data->val_out = adapter->phy_regs.bmsr;
6099 break;
6100 case MII_PHYSID1:
6101 data->val_out = (adapter->hw.phy.id >> 16);
6102 break;
6103 case MII_PHYSID2:
6104 data->val_out = (adapter->hw.phy.id & 0xFFFF);
6105 break;
6106 case MII_ADVERTISE:
6107 data->val_out = adapter->phy_regs.advertise;
6108 break;
6109 case MII_LPA:
6110 data->val_out = adapter->phy_regs.lpa;
6111 break;
6112 case MII_EXPANSION:
6113 data->val_out = adapter->phy_regs.expansion;
6114 break;
6115 case MII_CTRL1000:
6116 data->val_out = adapter->phy_regs.ctrl1000;
6117 break;
6118 case MII_STAT1000:
6119 data->val_out = adapter->phy_regs.stat1000;
6120 break;
6121 case MII_ESTATUS:
6122 data->val_out = adapter->phy_regs.estatus;
6123 break;
6124 default:
6125 return -EIO;
6126 }
6127 break;
6128 case SIOCSMIIREG:
6129 default:
6130 return -EOPNOTSUPP;
6131 }
6132 return 0;
6133}
6134
6135/**
6136 * e1000e_hwtstamp_set - control hardware time stamping
6137 * @netdev: network interface device structure
6138 * @ifr: interface request
6139 *
6140 * Outgoing time stamping can be enabled and disabled. Play nice and
6141 * disable it when requested, although it shouldn't cause any overhead
6142 * when no packet needs it. At most one packet in the queue may be
6143 * marked for time stamping, otherwise it would be impossible to tell
6144 * for sure to which packet the hardware time stamp belongs.
6145 *
6146 * Incoming time stamping has to be configured via the hardware filters.
6147 * Not all combinations are supported, in particular event type has to be
6148 * specified. Matching the kind of event packet is not supported, with the
6149 * exception of "all V2 events regardless of level 2 or 4".
6150 **/
6151static int e1000e_hwtstamp_set(struct net_device *netdev, struct ifreq *ifr)
6152{
6153 struct e1000_adapter *adapter = netdev_priv(netdev);
6154 struct hwtstamp_config config;
6155 int ret_val;
6156
6157 if (copy_from_user(&config, ifr->ifr_data, sizeof(config)))
6158 return -EFAULT;
6159
6160 ret_val = e1000e_config_hwtstamp(adapter, &config);
6161 if (ret_val)
6162 return ret_val;
6163
6164 switch (config.rx_filter) {
6165 case HWTSTAMP_FILTER_PTP_V2_L4_SYNC:
6166 case HWTSTAMP_FILTER_PTP_V2_L2_SYNC:
6167 case HWTSTAMP_FILTER_PTP_V2_SYNC:
6168 case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ:
6169 case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ:
6170 case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ:
6171 /* With V2 type filters which specify a Sync or Delay Request,
6172 * Path Delay Request/Response messages are also time stamped
6173 * by hardware so notify the caller the requested packets plus
6174 * some others are time stamped.
6175 */
6176 config.rx_filter = HWTSTAMP_FILTER_SOME;
6177 break;
6178 default:
6179 break;
6180 }
6181
6182 return copy_to_user(ifr->ifr_data, &config,
6183 sizeof(config)) ? -EFAULT : 0;
6184}
6185
6186static int e1000e_hwtstamp_get(struct net_device *netdev, struct ifreq *ifr)
6187{
6188 struct e1000_adapter *adapter = netdev_priv(netdev);
6189
6190 return copy_to_user(ifr->ifr_data, &adapter->hwtstamp_config,
6191 sizeof(adapter->hwtstamp_config)) ? -EFAULT : 0;
6192}
6193
6194static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
6195{
6196 switch (cmd) {
6197 case SIOCGMIIPHY:
6198 case SIOCGMIIREG:
6199 case SIOCSMIIREG:
6200 return e1000_mii_ioctl(netdev, ifr, cmd);
6201 case SIOCSHWTSTAMP:
6202 return e1000e_hwtstamp_set(netdev, ifr);
6203 case SIOCGHWTSTAMP:
6204 return e1000e_hwtstamp_get(netdev, ifr);
6205 default:
6206 return -EOPNOTSUPP;
6207 }
6208}
6209
6210static int e1000_init_phy_wakeup(struct e1000_adapter *adapter, u32 wufc)
6211{
6212 struct e1000_hw *hw = &adapter->hw;
6213 u32 i, mac_reg, wuc;
6214 u16 phy_reg, wuc_enable;
6215 int retval;
6216
6217 /* copy MAC RARs to PHY RARs */
6218 e1000_copy_rx_addrs_to_phy_ich8lan(hw);
6219
6220 retval = hw->phy.ops.acquire(hw);
6221 if (retval) {
6222 e_err("Could not acquire PHY\n");
6223 return retval;
6224 }
6225
6226 /* Enable access to wakeup registers on and set page to BM_WUC_PAGE */
6227 retval = e1000_enable_phy_wakeup_reg_access_bm(hw, &wuc_enable);
6228 if (retval)
6229 goto release;
6230
6231 /* copy MAC MTA to PHY MTA - only needed for pchlan */
6232 for (i = 0; i < adapter->hw.mac.mta_reg_count; i++) {
6233 mac_reg = E1000_READ_REG_ARRAY(hw, E1000_MTA, i);
6234 hw->phy.ops.write_reg_page(hw, BM_MTA(i),
6235 (u16)(mac_reg & 0xFFFF));
6236 hw->phy.ops.write_reg_page(hw, BM_MTA(i) + 1,
6237 (u16)((mac_reg >> 16) & 0xFFFF));
6238 }
6239
6240 /* configure PHY Rx Control register */
6241 hw->phy.ops.read_reg_page(&adapter->hw, BM_RCTL, &phy_reg);
6242 mac_reg = er32(RCTL);
6243 if (mac_reg & E1000_RCTL_UPE)
6244 phy_reg |= BM_RCTL_UPE;
6245 if (mac_reg & E1000_RCTL_MPE)
6246 phy_reg |= BM_RCTL_MPE;
6247 phy_reg &= ~(BM_RCTL_MO_MASK);
6248 if (mac_reg & E1000_RCTL_MO_3)
6249 phy_reg |= (FIELD_GET(E1000_RCTL_MO_3, mac_reg)
6250 << BM_RCTL_MO_SHIFT);
6251 if (mac_reg & E1000_RCTL_BAM)
6252 phy_reg |= BM_RCTL_BAM;
6253 if (mac_reg & E1000_RCTL_PMCF)
6254 phy_reg |= BM_RCTL_PMCF;
6255 mac_reg = er32(CTRL);
6256 if (mac_reg & E1000_CTRL_RFCE)
6257 phy_reg |= BM_RCTL_RFCE;
6258 hw->phy.ops.write_reg_page(&adapter->hw, BM_RCTL, phy_reg);
6259
6260 wuc = E1000_WUC_PME_EN;
6261 if (wufc & (E1000_WUFC_MAG | E1000_WUFC_LNKC))
6262 wuc |= E1000_WUC_APME;
6263
6264 /* enable PHY wakeup in MAC register */
6265 ew32(WUFC, wufc);
6266 ew32(WUC, (E1000_WUC_PHY_WAKE | E1000_WUC_APMPME |
6267 E1000_WUC_PME_STATUS | wuc));
6268
6269 /* configure and enable PHY wakeup in PHY registers */
6270 hw->phy.ops.write_reg_page(&adapter->hw, BM_WUFC, wufc);
6271 hw->phy.ops.write_reg_page(&adapter->hw, BM_WUC, wuc);
6272
6273 /* activate PHY wakeup */
6274 wuc_enable |= BM_WUC_ENABLE_BIT | BM_WUC_HOST_WU_BIT;
6275 retval = e1000_disable_phy_wakeup_reg_access_bm(hw, &wuc_enable);
6276 if (retval)
6277 e_err("Could not set PHY Host Wakeup bit\n");
6278release:
6279 hw->phy.ops.release(hw);
6280
6281 return retval;
6282}
6283
6284static void e1000e_flush_lpic(struct pci_dev *pdev)
6285{
6286 struct net_device *netdev = pci_get_drvdata(pdev);
6287 struct e1000_adapter *adapter = netdev_priv(netdev);
6288 struct e1000_hw *hw = &adapter->hw;
6289 u32 ret_val;
6290
6291 pm_runtime_get_sync(netdev->dev.parent);
6292
6293 ret_val = hw->phy.ops.acquire(hw);
6294 if (ret_val)
6295 goto fl_out;
6296
6297 pr_info("EEE TX LPI TIMER: %08X\n",
6298 er32(LPIC) >> E1000_LPIC_LPIET_SHIFT);
6299
6300 hw->phy.ops.release(hw);
6301
6302fl_out:
6303 pm_runtime_put_sync(netdev->dev.parent);
6304}
6305
6306/* S0ix implementation */
6307static void e1000e_s0ix_entry_flow(struct e1000_adapter *adapter)
6308{
6309 struct e1000_hw *hw = &adapter->hw;
6310 u32 mac_data;
6311 u16 phy_data;
6312
6313 if (er32(FWSM) & E1000_ICH_FWSM_FW_VALID &&
6314 hw->mac.type >= e1000_pch_adp) {
6315 /* Request ME configure the device for S0ix */
6316 mac_data = er32(H2ME);
6317 mac_data |= E1000_H2ME_START_DPG;
6318 mac_data &= ~E1000_H2ME_EXIT_DPG;
6319 trace_e1000e_trace_mac_register(mac_data);
6320 ew32(H2ME, mac_data);
6321 } else {
6322 /* Request driver configure the device to S0ix */
6323 /* Disable the periodic inband message,
6324 * don't request PCIe clock in K1 page770_17[10:9] = 10b
6325 */
6326 e1e_rphy(hw, HV_PM_CTRL, &phy_data);
6327 phy_data &= ~HV_PM_CTRL_K1_CLK_REQ;
6328 phy_data |= BIT(10);
6329 e1e_wphy(hw, HV_PM_CTRL, phy_data);
6330
6331 /* Make sure we don't exit K1 every time a new packet arrives
6332 * 772_29[5] = 1 CS_Mode_Stay_In_K1
6333 */
6334 e1e_rphy(hw, I217_CGFREG, &phy_data);
6335 phy_data |= BIT(5);
6336 e1e_wphy(hw, I217_CGFREG, phy_data);
6337
6338 /* Change the MAC/PHY interface to SMBus
6339 * Force the SMBus in PHY page769_23[0] = 1
6340 * Force the SMBus in MAC CTRL_EXT[11] = 1
6341 */
6342 e1e_rphy(hw, CV_SMB_CTRL, &phy_data);
6343 phy_data |= CV_SMB_CTRL_FORCE_SMBUS;
6344 e1e_wphy(hw, CV_SMB_CTRL, phy_data);
6345 mac_data = er32(CTRL_EXT);
6346 mac_data |= E1000_CTRL_EXT_FORCE_SMBUS;
6347 ew32(CTRL_EXT, mac_data);
6348
6349 /* DFT control: PHY bit: page769_20[0] = 1
6350 * page769_20[7] - PHY PLL stop
6351 * page769_20[8] - PHY go to the electrical idle
6352 * page769_20[9] - PHY serdes disable
6353 * Gate PPW via EXTCNF_CTRL - set 0x0F00[7] = 1
6354 */
6355 e1e_rphy(hw, I82579_DFT_CTRL, &phy_data);
6356 phy_data |= BIT(0);
6357 phy_data |= BIT(7);
6358 phy_data |= BIT(8);
6359 phy_data |= BIT(9);
6360 e1e_wphy(hw, I82579_DFT_CTRL, phy_data);
6361
6362 mac_data = er32(EXTCNF_CTRL);
6363 mac_data |= E1000_EXTCNF_CTRL_GATE_PHY_CFG;
6364 ew32(EXTCNF_CTRL, mac_data);
6365
6366 /* Enable the Dynamic Power Gating in the MAC */
6367 mac_data = er32(FEXTNVM7);
6368 mac_data |= BIT(22);
6369 ew32(FEXTNVM7, mac_data);
6370
6371 /* Disable disconnected cable conditioning for Power Gating */
6372 mac_data = er32(DPGFR);
6373 mac_data |= BIT(2);
6374 ew32(DPGFR, mac_data);
6375
6376 /* Don't wake from dynamic Power Gating with clock request */
6377 mac_data = er32(FEXTNVM12);
6378 mac_data |= BIT(12);
6379 ew32(FEXTNVM12, mac_data);
6380
6381 /* Ungate PGCB clock */
6382 mac_data = er32(FEXTNVM9);
6383 mac_data &= ~BIT(28);
6384 ew32(FEXTNVM9, mac_data);
6385
6386 /* Enable K1 off to enable mPHY Power Gating */
6387 mac_data = er32(FEXTNVM6);
6388 mac_data |= BIT(31);
6389 ew32(FEXTNVM6, mac_data);
6390
6391 /* Enable mPHY power gating for any link and speed */
6392 mac_data = er32(FEXTNVM8);
6393 mac_data |= BIT(9);
6394 ew32(FEXTNVM8, mac_data);
6395
6396 /* Enable the Dynamic Clock Gating in the DMA and MAC */
6397 mac_data = er32(CTRL_EXT);
6398 mac_data |= E1000_CTRL_EXT_DMA_DYN_CLK_EN;
6399 ew32(CTRL_EXT, mac_data);
6400
6401 /* No MAC DPG gating SLP_S0 in modern standby
6402 * Switch the logic of the lanphypc to use PMC counter
6403 */
6404 mac_data = er32(FEXTNVM5);
6405 mac_data |= BIT(7);
6406 ew32(FEXTNVM5, mac_data);
6407 }
6408
6409 /* Disable the time synchronization clock */
6410 mac_data = er32(FEXTNVM7);
6411 mac_data |= BIT(31);
6412 mac_data &= ~BIT(0);
6413 ew32(FEXTNVM7, mac_data);
6414
6415 /* Dynamic Power Gating Enable */
6416 mac_data = er32(CTRL_EXT);
6417 mac_data |= BIT(3);
6418 ew32(CTRL_EXT, mac_data);
6419
6420 /* Check MAC Tx/Rx packet buffer pointers.
6421 * Reset MAC Tx/Rx packet buffer pointers to suppress any
6422 * pending traffic indication that would prevent power gating.
6423 */
6424 mac_data = er32(TDFH);
6425 if (mac_data)
6426 ew32(TDFH, 0);
6427 mac_data = er32(TDFT);
6428 if (mac_data)
6429 ew32(TDFT, 0);
6430 mac_data = er32(TDFHS);
6431 if (mac_data)
6432 ew32(TDFHS, 0);
6433 mac_data = er32(TDFTS);
6434 if (mac_data)
6435 ew32(TDFTS, 0);
6436 mac_data = er32(TDFPC);
6437 if (mac_data)
6438 ew32(TDFPC, 0);
6439 mac_data = er32(RDFH);
6440 if (mac_data)
6441 ew32(RDFH, 0);
6442 mac_data = er32(RDFT);
6443 if (mac_data)
6444 ew32(RDFT, 0);
6445 mac_data = er32(RDFHS);
6446 if (mac_data)
6447 ew32(RDFHS, 0);
6448 mac_data = er32(RDFTS);
6449 if (mac_data)
6450 ew32(RDFTS, 0);
6451 mac_data = er32(RDFPC);
6452 if (mac_data)
6453 ew32(RDFPC, 0);
6454}
6455
6456static void e1000e_s0ix_exit_flow(struct e1000_adapter *adapter)
6457{
6458 struct e1000_hw *hw = &adapter->hw;
6459 bool firmware_bug = false;
6460 u32 mac_data;
6461 u16 phy_data;
6462 u32 i = 0;
6463
6464 if (er32(FWSM) & E1000_ICH_FWSM_FW_VALID &&
6465 hw->mac.type >= e1000_pch_adp) {
6466 /* Keep the GPT clock enabled for CSME */
6467 mac_data = er32(FEXTNVM);
6468 mac_data |= BIT(3);
6469 ew32(FEXTNVM, mac_data);
6470 /* Request ME unconfigure the device from S0ix */
6471 mac_data = er32(H2ME);
6472 mac_data &= ~E1000_H2ME_START_DPG;
6473 mac_data |= E1000_H2ME_EXIT_DPG;
6474 trace_e1000e_trace_mac_register(mac_data);
6475 ew32(H2ME, mac_data);
6476
6477 /* Poll up to 2.5 seconds for ME to unconfigure DPG.
6478 * If this takes more than 1 second, show a warning indicating a
6479 * firmware bug
6480 */
6481 while (!(er32(EXFWSM) & E1000_EXFWSM_DPG_EXIT_DONE)) {
6482 if (i > 100 && !firmware_bug)
6483 firmware_bug = true;
6484
6485 if (i++ == 250) {
6486 e_dbg("Timeout (firmware bug): %d msec\n",
6487 i * 10);
6488 break;
6489 }
6490
6491 usleep_range(10000, 11000);
6492 }
6493 if (firmware_bug)
6494 e_warn("DPG_EXIT_DONE took %d msec. This is a firmware bug\n",
6495 i * 10);
6496 else
6497 e_dbg("DPG_EXIT_DONE cleared after %d msec\n", i * 10);
6498 } else {
6499 /* Request driver unconfigure the device from S0ix */
6500
6501 /* Disable the Dynamic Power Gating in the MAC */
6502 mac_data = er32(FEXTNVM7);
6503 mac_data &= 0xFFBFFFFF;
6504 ew32(FEXTNVM7, mac_data);
6505
6506 /* Disable mPHY power gating for any link and speed */
6507 mac_data = er32(FEXTNVM8);
6508 mac_data &= ~BIT(9);
6509 ew32(FEXTNVM8, mac_data);
6510
6511 /* Disable K1 off */
6512 mac_data = er32(FEXTNVM6);
6513 mac_data &= ~BIT(31);
6514 ew32(FEXTNVM6, mac_data);
6515
6516 /* Disable Ungate PGCB clock */
6517 mac_data = er32(FEXTNVM9);
6518 mac_data |= BIT(28);
6519 ew32(FEXTNVM9, mac_data);
6520
6521 /* Cancel not waking from dynamic
6522 * Power Gating with clock request
6523 */
6524 mac_data = er32(FEXTNVM12);
6525 mac_data &= ~BIT(12);
6526 ew32(FEXTNVM12, mac_data);
6527
6528 /* Cancel disable disconnected cable conditioning
6529 * for Power Gating
6530 */
6531 mac_data = er32(DPGFR);
6532 mac_data &= ~BIT(2);
6533 ew32(DPGFR, mac_data);
6534
6535 /* Disable the Dynamic Clock Gating in the DMA and MAC */
6536 mac_data = er32(CTRL_EXT);
6537 mac_data &= 0xFFF7FFFF;
6538 ew32(CTRL_EXT, mac_data);
6539
6540 /* Revert the lanphypc logic to use the internal Gbe counter
6541 * and not the PMC counter
6542 */
6543 mac_data = er32(FEXTNVM5);
6544 mac_data &= 0xFFFFFF7F;
6545 ew32(FEXTNVM5, mac_data);
6546
6547 /* Enable the periodic inband message,
6548 * Request PCIe clock in K1 page770_17[10:9] =01b
6549 */
6550 e1e_rphy(hw, HV_PM_CTRL, &phy_data);
6551 phy_data &= 0xFBFF;
6552 phy_data |= HV_PM_CTRL_K1_CLK_REQ;
6553 e1e_wphy(hw, HV_PM_CTRL, phy_data);
6554
6555 /* Return back configuration
6556 * 772_29[5] = 0 CS_Mode_Stay_In_K1
6557 */
6558 e1e_rphy(hw, I217_CGFREG, &phy_data);
6559 phy_data &= 0xFFDF;
6560 e1e_wphy(hw, I217_CGFREG, phy_data);
6561
6562 /* Change the MAC/PHY interface to Kumeran
6563 * Unforce the SMBus in PHY page769_23[0] = 0
6564 * Unforce the SMBus in MAC CTRL_EXT[11] = 0
6565 */
6566 e1e_rphy(hw, CV_SMB_CTRL, &phy_data);
6567 phy_data &= ~CV_SMB_CTRL_FORCE_SMBUS;
6568 e1e_wphy(hw, CV_SMB_CTRL, phy_data);
6569 mac_data = er32(CTRL_EXT);
6570 mac_data &= ~E1000_CTRL_EXT_FORCE_SMBUS;
6571 ew32(CTRL_EXT, mac_data);
6572 }
6573
6574 /* Disable Dynamic Power Gating */
6575 mac_data = er32(CTRL_EXT);
6576 mac_data &= 0xFFFFFFF7;
6577 ew32(CTRL_EXT, mac_data);
6578
6579 /* Enable the time synchronization clock */
6580 mac_data = er32(FEXTNVM7);
6581 mac_data &= ~BIT(31);
6582 mac_data |= BIT(0);
6583 ew32(FEXTNVM7, mac_data);
6584}
6585
6586static int e1000e_pm_freeze(struct device *dev)
6587{
6588 struct net_device *netdev = dev_get_drvdata(dev);
6589 struct e1000_adapter *adapter = netdev_priv(netdev);
6590 bool present;
6591
6592 rtnl_lock();
6593
6594 present = netif_device_present(netdev);
6595 netif_device_detach(netdev);
6596
6597 if (present && netif_running(netdev)) {
6598 int count = E1000_CHECK_RESET_COUNT;
6599
6600 while (test_bit(__E1000_RESETTING, &adapter->state) && count--)
6601 usleep_range(10000, 11000);
6602
6603 WARN_ON(test_bit(__E1000_RESETTING, &adapter->state));
6604
6605 /* Quiesce the device without resetting the hardware */
6606 e1000e_down(adapter, false);
6607 e1000_free_irq(adapter);
6608 }
6609 rtnl_unlock();
6610
6611 e1000e_reset_interrupt_capability(adapter);
6612
6613 /* Allow time for pending master requests to run */
6614 e1000e_disable_pcie_master(&adapter->hw);
6615
6616 return 0;
6617}
6618
6619static int __e1000_shutdown(struct pci_dev *pdev, bool runtime)
6620{
6621 struct net_device *netdev = pci_get_drvdata(pdev);
6622 struct e1000_adapter *adapter = netdev_priv(netdev);
6623 struct e1000_hw *hw = &adapter->hw;
6624 u32 ctrl, ctrl_ext, rctl, status, wufc;
6625 int retval = 0;
6626
6627 /* Runtime suspend should only enable wakeup for link changes */
6628 if (runtime)
6629 wufc = E1000_WUFC_LNKC;
6630 else if (device_may_wakeup(&pdev->dev))
6631 wufc = adapter->wol;
6632 else
6633 wufc = 0;
6634
6635 status = er32(STATUS);
6636 if (status & E1000_STATUS_LU)
6637 wufc &= ~E1000_WUFC_LNKC;
6638
6639 if (wufc) {
6640 e1000_setup_rctl(adapter);
6641 e1000e_set_rx_mode(netdev);
6642
6643 /* turn on all-multi mode if wake on multicast is enabled */
6644 if (wufc & E1000_WUFC_MC) {
6645 rctl = er32(RCTL);
6646 rctl |= E1000_RCTL_MPE;
6647 ew32(RCTL, rctl);
6648 }
6649
6650 ctrl = er32(CTRL);
6651 ctrl |= E1000_CTRL_ADVD3WUC;
6652 if (!(adapter->flags2 & FLAG2_HAS_PHY_WAKEUP))
6653 ctrl |= E1000_CTRL_EN_PHY_PWR_MGMT;
6654 ew32(CTRL, ctrl);
6655
6656 if (adapter->hw.phy.media_type == e1000_media_type_fiber ||
6657 adapter->hw.phy.media_type ==
6658 e1000_media_type_internal_serdes) {
6659 /* keep the laser running in D3 */
6660 ctrl_ext = er32(CTRL_EXT);
6661 ctrl_ext |= E1000_CTRL_EXT_SDP3_DATA;
6662 ew32(CTRL_EXT, ctrl_ext);
6663 }
6664
6665 if (!runtime)
6666 e1000e_power_up_phy(adapter);
6667
6668 if (adapter->flags & FLAG_IS_ICH)
6669 e1000_suspend_workarounds_ich8lan(&adapter->hw);
6670
6671 if (adapter->flags2 & FLAG2_HAS_PHY_WAKEUP) {
6672 /* enable wakeup by the PHY */
6673 retval = e1000_init_phy_wakeup(adapter, wufc);
6674 if (retval)
6675 return retval;
6676 } else {
6677 /* enable wakeup by the MAC */
6678 ew32(WUFC, wufc);
6679 ew32(WUC, E1000_WUC_PME_EN);
6680 }
6681 } else {
6682 ew32(WUC, 0);
6683 ew32(WUFC, 0);
6684
6685 e1000_power_down_phy(adapter);
6686 }
6687
6688 if (adapter->hw.phy.type == e1000_phy_igp_3) {
6689 e1000e_igp3_phy_powerdown_workaround_ich8lan(&adapter->hw);
6690 } else if (hw->mac.type >= e1000_pch_lpt) {
6691 if (wufc && !(wufc & (E1000_WUFC_EX | E1000_WUFC_MC | E1000_WUFC_BC)))
6692 /* ULP does not support wake from unicast, multicast
6693 * or broadcast.
6694 */
6695 retval = e1000_enable_ulp_lpt_lp(hw, !runtime);
6696
6697 if (retval)
6698 return retval;
6699 }
6700
6701 /* Ensure that the appropriate bits are set in LPI_CTRL
6702 * for EEE in Sx
6703 */
6704 if ((hw->phy.type >= e1000_phy_i217) &&
6705 adapter->eee_advert && hw->dev_spec.ich8lan.eee_lp_ability) {
6706 u16 lpi_ctrl = 0;
6707
6708 retval = hw->phy.ops.acquire(hw);
6709 if (!retval) {
6710 retval = e1e_rphy_locked(hw, I82579_LPI_CTRL,
6711 &lpi_ctrl);
6712 if (!retval) {
6713 if (adapter->eee_advert &
6714 hw->dev_spec.ich8lan.eee_lp_ability &
6715 I82579_EEE_100_SUPPORTED)
6716 lpi_ctrl |= I82579_LPI_CTRL_100_ENABLE;
6717 if (adapter->eee_advert &
6718 hw->dev_spec.ich8lan.eee_lp_ability &
6719 I82579_EEE_1000_SUPPORTED)
6720 lpi_ctrl |= I82579_LPI_CTRL_1000_ENABLE;
6721
6722 retval = e1e_wphy_locked(hw, I82579_LPI_CTRL,
6723 lpi_ctrl);
6724 }
6725 }
6726 hw->phy.ops.release(hw);
6727 }
6728
6729 /* Release control of h/w to f/w. If f/w is AMT enabled, this
6730 * would have already happened in close and is redundant.
6731 */
6732 e1000e_release_hw_control(adapter);
6733
6734 pci_clear_master(pdev);
6735
6736 /* The pci-e switch on some quad port adapters will report a
6737 * correctable error when the MAC transitions from D0 to D3. To
6738 * prevent this we need to mask off the correctable errors on the
6739 * downstream port of the pci-e switch.
6740 *
6741 * We don't have the associated upstream bridge while assigning
6742 * the PCI device into guest. For example, the KVM on power is
6743 * one of the cases.
6744 */
6745 if (adapter->flags & FLAG_IS_QUAD_PORT) {
6746 struct pci_dev *us_dev = pdev->bus->self;
6747 u16 devctl;
6748
6749 if (!us_dev)
6750 return 0;
6751
6752 pcie_capability_read_word(us_dev, PCI_EXP_DEVCTL, &devctl);
6753 pcie_capability_write_word(us_dev, PCI_EXP_DEVCTL,
6754 (devctl & ~PCI_EXP_DEVCTL_CERE));
6755
6756 pci_save_state(pdev);
6757 pci_prepare_to_sleep(pdev);
6758
6759 pcie_capability_write_word(us_dev, PCI_EXP_DEVCTL, devctl);
6760 }
6761
6762 return 0;
6763}
6764
6765/**
6766 * __e1000e_disable_aspm - Disable ASPM states
6767 * @pdev: pointer to PCI device struct
6768 * @state: bit-mask of ASPM states to disable
6769 * @locked: indication if this context holds pci_bus_sem locked.
6770 *
6771 * Some devices *must* have certain ASPM states disabled per hardware errata.
6772 **/
6773static void __e1000e_disable_aspm(struct pci_dev *pdev, u16 state, int locked)
6774{
6775 struct pci_dev *parent = pdev->bus->self;
6776 u16 aspm_dis_mask = 0;
6777 u16 pdev_aspmc, parent_aspmc;
6778
6779 switch (state) {
6780 case PCIE_LINK_STATE_L0S:
6781 case PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1:
6782 aspm_dis_mask |= PCI_EXP_LNKCTL_ASPM_L0S;
6783 fallthrough; /* can't have L1 without L0s */
6784 case PCIE_LINK_STATE_L1:
6785 aspm_dis_mask |= PCI_EXP_LNKCTL_ASPM_L1;
6786 break;
6787 default:
6788 return;
6789 }
6790
6791 pcie_capability_read_word(pdev, PCI_EXP_LNKCTL, &pdev_aspmc);
6792 pdev_aspmc &= PCI_EXP_LNKCTL_ASPMC;
6793
6794 if (parent) {
6795 pcie_capability_read_word(parent, PCI_EXP_LNKCTL,
6796 &parent_aspmc);
6797 parent_aspmc &= PCI_EXP_LNKCTL_ASPMC;
6798 }
6799
6800 /* Nothing to do if the ASPM states to be disabled already are */
6801 if (!(pdev_aspmc & aspm_dis_mask) &&
6802 (!parent || !(parent_aspmc & aspm_dis_mask)))
6803 return;
6804
6805 dev_info(&pdev->dev, "Disabling ASPM %s %s\n",
6806 (aspm_dis_mask & pdev_aspmc & PCI_EXP_LNKCTL_ASPM_L0S) ?
6807 "L0s" : "",
6808 (aspm_dis_mask & pdev_aspmc & PCI_EXP_LNKCTL_ASPM_L1) ?
6809 "L1" : "");
6810
6811#ifdef CONFIG_PCIEASPM
6812 if (locked)
6813 pci_disable_link_state_locked(pdev, state);
6814 else
6815 pci_disable_link_state(pdev, state);
6816
6817 /* Double-check ASPM control. If not disabled by the above, the
6818 * BIOS is preventing that from happening (or CONFIG_PCIEASPM is
6819 * not enabled); override by writing PCI config space directly.
6820 */
6821 pcie_capability_read_word(pdev, PCI_EXP_LNKCTL, &pdev_aspmc);
6822 pdev_aspmc &= PCI_EXP_LNKCTL_ASPMC;
6823
6824 if (!(aspm_dis_mask & pdev_aspmc))
6825 return;
6826#endif
6827
6828 /* Both device and parent should have the same ASPM setting.
6829 * Disable ASPM in downstream component first and then upstream.
6830 */
6831 pcie_capability_clear_word(pdev, PCI_EXP_LNKCTL, aspm_dis_mask);
6832
6833 if (parent)
6834 pcie_capability_clear_word(parent, PCI_EXP_LNKCTL,
6835 aspm_dis_mask);
6836}
6837
6838/**
6839 * e1000e_disable_aspm - Disable ASPM states.
6840 * @pdev: pointer to PCI device struct
6841 * @state: bit-mask of ASPM states to disable
6842 *
6843 * This function acquires the pci_bus_sem!
6844 * Some devices *must* have certain ASPM states disabled per hardware errata.
6845 **/
6846static void e1000e_disable_aspm(struct pci_dev *pdev, u16 state)
6847{
6848 __e1000e_disable_aspm(pdev, state, 0);
6849}
6850
6851/**
6852 * e1000e_disable_aspm_locked - Disable ASPM states.
6853 * @pdev: pointer to PCI device struct
6854 * @state: bit-mask of ASPM states to disable
6855 *
6856 * This function must be called with pci_bus_sem acquired!
6857 * Some devices *must* have certain ASPM states disabled per hardware errata.
6858 **/
6859static void e1000e_disable_aspm_locked(struct pci_dev *pdev, u16 state)
6860{
6861 __e1000e_disable_aspm(pdev, state, 1);
6862}
6863
6864static int e1000e_pm_thaw(struct device *dev)
6865{
6866 struct net_device *netdev = dev_get_drvdata(dev);
6867 struct e1000_adapter *adapter = netdev_priv(netdev);
6868 int rc = 0;
6869
6870 e1000e_set_interrupt_capability(adapter);
6871
6872 rtnl_lock();
6873 if (netif_running(netdev)) {
6874 rc = e1000_request_irq(adapter);
6875 if (rc)
6876 goto err_irq;
6877
6878 e1000e_up(adapter);
6879 }
6880
6881 netif_device_attach(netdev);
6882err_irq:
6883 rtnl_unlock();
6884
6885 return rc;
6886}
6887
6888static int __e1000_resume(struct pci_dev *pdev)
6889{
6890 struct net_device *netdev = pci_get_drvdata(pdev);
6891 struct e1000_adapter *adapter = netdev_priv(netdev);
6892 struct e1000_hw *hw = &adapter->hw;
6893 u16 aspm_disable_flag = 0;
6894
6895 if (adapter->flags2 & FLAG2_DISABLE_ASPM_L0S)
6896 aspm_disable_flag = PCIE_LINK_STATE_L0S;
6897 if (adapter->flags2 & FLAG2_DISABLE_ASPM_L1)
6898 aspm_disable_flag |= PCIE_LINK_STATE_L1;
6899 if (aspm_disable_flag)
6900 e1000e_disable_aspm(pdev, aspm_disable_flag);
6901
6902 pci_set_master(pdev);
6903
6904 if (hw->mac.type >= e1000_pch2lan)
6905 e1000_resume_workarounds_pchlan(&adapter->hw);
6906
6907 e1000e_power_up_phy(adapter);
6908
6909 /* report the system wakeup cause from S3/S4 */
6910 if (adapter->flags2 & FLAG2_HAS_PHY_WAKEUP) {
6911 u16 phy_data;
6912
6913 e1e_rphy(&adapter->hw, BM_WUS, &phy_data);
6914 if (phy_data) {
6915 e_info("PHY Wakeup cause - %s\n",
6916 phy_data & E1000_WUS_EX ? "Unicast Packet" :
6917 phy_data & E1000_WUS_MC ? "Multicast Packet" :
6918 phy_data & E1000_WUS_BC ? "Broadcast Packet" :
6919 phy_data & E1000_WUS_MAG ? "Magic Packet" :
6920 phy_data & E1000_WUS_LNKC ?
6921 "Link Status Change" : "other");
6922 }
6923 e1e_wphy(&adapter->hw, BM_WUS, ~0);
6924 } else {
6925 u32 wus = er32(WUS);
6926
6927 if (wus) {
6928 e_info("MAC Wakeup cause - %s\n",
6929 wus & E1000_WUS_EX ? "Unicast Packet" :
6930 wus & E1000_WUS_MC ? "Multicast Packet" :
6931 wus & E1000_WUS_BC ? "Broadcast Packet" :
6932 wus & E1000_WUS_MAG ? "Magic Packet" :
6933 wus & E1000_WUS_LNKC ? "Link Status Change" :
6934 "other");
6935 }
6936 ew32(WUS, ~0);
6937 }
6938
6939 e1000e_reset(adapter);
6940
6941 e1000_init_manageability_pt(adapter);
6942
6943 /* If the controller has AMT, do not set DRV_LOAD until the interface
6944 * is up. For all other cases, let the f/w know that the h/w is now
6945 * under the control of the driver.
6946 */
6947 if (!(adapter->flags & FLAG_HAS_AMT))
6948 e1000e_get_hw_control(adapter);
6949
6950 return 0;
6951}
6952
6953static __maybe_unused int e1000e_pm_prepare(struct device *dev)
6954{
6955 return pm_runtime_suspended(dev) &&
6956 pm_suspend_via_firmware();
6957}
6958
6959static __maybe_unused int e1000e_pm_suspend(struct device *dev)
6960{
6961 struct net_device *netdev = pci_get_drvdata(to_pci_dev(dev));
6962 struct e1000_adapter *adapter = netdev_priv(netdev);
6963 struct pci_dev *pdev = to_pci_dev(dev);
6964 int rc;
6965
6966 e1000e_flush_lpic(pdev);
6967
6968 e1000e_pm_freeze(dev);
6969
6970 rc = __e1000_shutdown(pdev, false);
6971 if (rc) {
6972 e1000e_pm_thaw(dev);
6973 } else {
6974 /* Introduce S0ix implementation */
6975 if (adapter->flags2 & FLAG2_ENABLE_S0IX_FLOWS)
6976 e1000e_s0ix_entry_flow(adapter);
6977 }
6978
6979 return rc;
6980}
6981
6982static __maybe_unused int e1000e_pm_resume(struct device *dev)
6983{
6984 struct net_device *netdev = pci_get_drvdata(to_pci_dev(dev));
6985 struct e1000_adapter *adapter = netdev_priv(netdev);
6986 struct pci_dev *pdev = to_pci_dev(dev);
6987 int rc;
6988
6989 /* Introduce S0ix implementation */
6990 if (adapter->flags2 & FLAG2_ENABLE_S0IX_FLOWS)
6991 e1000e_s0ix_exit_flow(adapter);
6992
6993 rc = __e1000_resume(pdev);
6994 if (rc)
6995 return rc;
6996
6997 return e1000e_pm_thaw(dev);
6998}
6999
7000static __maybe_unused int e1000e_pm_runtime_idle(struct device *dev)
7001{
7002 struct net_device *netdev = dev_get_drvdata(dev);
7003 struct e1000_adapter *adapter = netdev_priv(netdev);
7004 u16 eee_lp;
7005
7006 eee_lp = adapter->hw.dev_spec.ich8lan.eee_lp_ability;
7007
7008 if (!e1000e_has_link(adapter)) {
7009 adapter->hw.dev_spec.ich8lan.eee_lp_ability = eee_lp;
7010 pm_schedule_suspend(dev, 5 * MSEC_PER_SEC);
7011 }
7012
7013 return -EBUSY;
7014}
7015
7016static __maybe_unused int e1000e_pm_runtime_resume(struct device *dev)
7017{
7018 struct pci_dev *pdev = to_pci_dev(dev);
7019 struct net_device *netdev = pci_get_drvdata(pdev);
7020 struct e1000_adapter *adapter = netdev_priv(netdev);
7021 int rc;
7022
7023 pdev->pme_poll = true;
7024
7025 rc = __e1000_resume(pdev);
7026 if (rc)
7027 return rc;
7028
7029 if (netdev->flags & IFF_UP)
7030 e1000e_up(adapter);
7031
7032 return rc;
7033}
7034
7035static __maybe_unused int e1000e_pm_runtime_suspend(struct device *dev)
7036{
7037 struct pci_dev *pdev = to_pci_dev(dev);
7038 struct net_device *netdev = pci_get_drvdata(pdev);
7039 struct e1000_adapter *adapter = netdev_priv(netdev);
7040
7041 if (netdev->flags & IFF_UP) {
7042 int count = E1000_CHECK_RESET_COUNT;
7043
7044 while (test_bit(__E1000_RESETTING, &adapter->state) && count--)
7045 usleep_range(10000, 11000);
7046
7047 WARN_ON(test_bit(__E1000_RESETTING, &adapter->state));
7048
7049 /* Down the device without resetting the hardware */
7050 e1000e_down(adapter, false);
7051 }
7052
7053 if (__e1000_shutdown(pdev, true)) {
7054 e1000e_pm_runtime_resume(dev);
7055 return -EBUSY;
7056 }
7057
7058 return 0;
7059}
7060
7061static void e1000_shutdown(struct pci_dev *pdev)
7062{
7063 e1000e_flush_lpic(pdev);
7064
7065 e1000e_pm_freeze(&pdev->dev);
7066
7067 __e1000_shutdown(pdev, false);
7068}
7069
7070#ifdef CONFIG_NET_POLL_CONTROLLER
7071
7072static irqreturn_t e1000_intr_msix(int __always_unused irq, void *data)
7073{
7074 struct net_device *netdev = data;
7075 struct e1000_adapter *adapter = netdev_priv(netdev);
7076
7077 if (adapter->msix_entries) {
7078 int vector, msix_irq;
7079
7080 vector = 0;
7081 msix_irq = adapter->msix_entries[vector].vector;
7082 if (disable_hardirq(msix_irq))
7083 e1000_intr_msix_rx(msix_irq, netdev);
7084 enable_irq(msix_irq);
7085
7086 vector++;
7087 msix_irq = adapter->msix_entries[vector].vector;
7088 if (disable_hardirq(msix_irq))
7089 e1000_intr_msix_tx(msix_irq, netdev);
7090 enable_irq(msix_irq);
7091
7092 vector++;
7093 msix_irq = adapter->msix_entries[vector].vector;
7094 if (disable_hardirq(msix_irq))
7095 e1000_msix_other(msix_irq, netdev);
7096 enable_irq(msix_irq);
7097 }
7098
7099 return IRQ_HANDLED;
7100}
7101
7102/**
7103 * e1000_netpoll
7104 * @netdev: network interface device structure
7105 *
7106 * Polling 'interrupt' - used by things like netconsole to send skbs
7107 * without having to re-enable interrupts. It's not called while
7108 * the interrupt routine is executing.
7109 */
7110static void e1000_netpoll(struct net_device *netdev)
7111{
7112 struct e1000_adapter *adapter = netdev_priv(netdev);
7113
7114 switch (adapter->int_mode) {
7115 case E1000E_INT_MODE_MSIX:
7116 e1000_intr_msix(adapter->pdev->irq, netdev);
7117 break;
7118 case E1000E_INT_MODE_MSI:
7119 if (disable_hardirq(adapter->pdev->irq))
7120 e1000_intr_msi(adapter->pdev->irq, netdev);
7121 enable_irq(adapter->pdev->irq);
7122 break;
7123 default: /* E1000E_INT_MODE_LEGACY */
7124 if (disable_hardirq(adapter->pdev->irq))
7125 e1000_intr(adapter->pdev->irq, netdev);
7126 enable_irq(adapter->pdev->irq);
7127 break;
7128 }
7129}
7130#endif
7131
7132/**
7133 * e1000_io_error_detected - called when PCI error is detected
7134 * @pdev: Pointer to PCI device
7135 * @state: The current pci connection state
7136 *
7137 * This function is called after a PCI bus error affecting
7138 * this device has been detected.
7139 */
7140static pci_ers_result_t e1000_io_error_detected(struct pci_dev *pdev,
7141 pci_channel_state_t state)
7142{
7143 e1000e_pm_freeze(&pdev->dev);
7144
7145 if (state == pci_channel_io_perm_failure)
7146 return PCI_ERS_RESULT_DISCONNECT;
7147
7148 pci_disable_device(pdev);
7149
7150 /* Request a slot reset. */
7151 return PCI_ERS_RESULT_NEED_RESET;
7152}
7153
7154/**
7155 * e1000_io_slot_reset - called after the pci bus has been reset.
7156 * @pdev: Pointer to PCI device
7157 *
7158 * Restart the card from scratch, as if from a cold-boot. Implementation
7159 * resembles the first-half of the e1000e_pm_resume routine.
7160 */
7161static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev)
7162{
7163 struct net_device *netdev = pci_get_drvdata(pdev);
7164 struct e1000_adapter *adapter = netdev_priv(netdev);
7165 struct e1000_hw *hw = &adapter->hw;
7166 u16 aspm_disable_flag = 0;
7167 int err;
7168 pci_ers_result_t result;
7169
7170 if (adapter->flags2 & FLAG2_DISABLE_ASPM_L0S)
7171 aspm_disable_flag = PCIE_LINK_STATE_L0S;
7172 if (adapter->flags2 & FLAG2_DISABLE_ASPM_L1)
7173 aspm_disable_flag |= PCIE_LINK_STATE_L1;
7174 if (aspm_disable_flag)
7175 e1000e_disable_aspm_locked(pdev, aspm_disable_flag);
7176
7177 err = pci_enable_device_mem(pdev);
7178 if (err) {
7179 dev_err(&pdev->dev,
7180 "Cannot re-enable PCI device after reset.\n");
7181 result = PCI_ERS_RESULT_DISCONNECT;
7182 } else {
7183 pdev->state_saved = true;
7184 pci_restore_state(pdev);
7185 pci_set_master(pdev);
7186
7187 pci_enable_wake(pdev, PCI_D3hot, 0);
7188 pci_enable_wake(pdev, PCI_D3cold, 0);
7189
7190 e1000e_reset(adapter);
7191 ew32(WUS, ~0);
7192 result = PCI_ERS_RESULT_RECOVERED;
7193 }
7194
7195 return result;
7196}
7197
7198/**
7199 * e1000_io_resume - called when traffic can start flowing again.
7200 * @pdev: Pointer to PCI device
7201 *
7202 * This callback is called when the error recovery driver tells us that
7203 * its OK to resume normal operation. Implementation resembles the
7204 * second-half of the e1000e_pm_resume routine.
7205 */
7206static void e1000_io_resume(struct pci_dev *pdev)
7207{
7208 struct net_device *netdev = pci_get_drvdata(pdev);
7209 struct e1000_adapter *adapter = netdev_priv(netdev);
7210
7211 e1000_init_manageability_pt(adapter);
7212
7213 e1000e_pm_thaw(&pdev->dev);
7214
7215 /* If the controller has AMT, do not set DRV_LOAD until the interface
7216 * is up. For all other cases, let the f/w know that the h/w is now
7217 * under the control of the driver.
7218 */
7219 if (!(adapter->flags & FLAG_HAS_AMT))
7220 e1000e_get_hw_control(adapter);
7221}
7222
7223static void e1000_print_device_info(struct e1000_adapter *adapter)
7224{
7225 struct e1000_hw *hw = &adapter->hw;
7226 struct net_device *netdev = adapter->netdev;
7227 u32 ret_val;
7228 u8 pba_str[E1000_PBANUM_LENGTH];
7229
7230 /* print bus type/speed/width info */
7231 e_info("(PCI Express:2.5GT/s:%s) %pM\n",
7232 /* bus width */
7233 ((hw->bus.width == e1000_bus_width_pcie_x4) ? "Width x4" :
7234 "Width x1"),
7235 /* MAC address */
7236 netdev->dev_addr);
7237 e_info("Intel(R) PRO/%s Network Connection\n",
7238 (hw->phy.type == e1000_phy_ife) ? "10/100" : "1000");
7239 ret_val = e1000_read_pba_string_generic(hw, pba_str,
7240 E1000_PBANUM_LENGTH);
7241 if (ret_val)
7242 strscpy((char *)pba_str, "Unknown", sizeof(pba_str));
7243 e_info("MAC: %d, PHY: %d, PBA No: %s\n",
7244 hw->mac.type, hw->phy.type, pba_str);
7245}
7246
7247static void e1000_eeprom_checks(struct e1000_adapter *adapter)
7248{
7249 struct e1000_hw *hw = &adapter->hw;
7250 int ret_val;
7251 u16 buf = 0;
7252
7253 if (hw->mac.type != e1000_82573)
7254 return;
7255
7256 ret_val = e1000_read_nvm(hw, NVM_INIT_CONTROL2_REG, 1, &buf);
7257 le16_to_cpus(&buf);
7258 if (!ret_val && (!(buf & BIT(0)))) {
7259 /* Deep Smart Power Down (DSPD) */
7260 dev_warn(&adapter->pdev->dev,
7261 "Warning: detected DSPD enabled in EEPROM\n");
7262 }
7263}
7264
7265static netdev_features_t e1000_fix_features(struct net_device *netdev,
7266 netdev_features_t features)
7267{
7268 struct e1000_adapter *adapter = netdev_priv(netdev);
7269 struct e1000_hw *hw = &adapter->hw;
7270
7271 /* Jumbo frame workaround on 82579 and newer requires CRC be stripped */
7272 if ((hw->mac.type >= e1000_pch2lan) && (netdev->mtu > ETH_DATA_LEN))
7273 features &= ~NETIF_F_RXFCS;
7274
7275 /* Since there is no support for separate Rx/Tx vlan accel
7276 * enable/disable make sure Tx flag is always in same state as Rx.
7277 */
7278 if (features & NETIF_F_HW_VLAN_CTAG_RX)
7279 features |= NETIF_F_HW_VLAN_CTAG_TX;
7280 else
7281 features &= ~NETIF_F_HW_VLAN_CTAG_TX;
7282
7283 return features;
7284}
7285
7286static int e1000_set_features(struct net_device *netdev,
7287 netdev_features_t features)
7288{
7289 struct e1000_adapter *adapter = netdev_priv(netdev);
7290 netdev_features_t changed = features ^ netdev->features;
7291
7292 if (changed & (NETIF_F_TSO | NETIF_F_TSO6))
7293 adapter->flags |= FLAG_TSO_FORCE;
7294
7295 if (!(changed & (NETIF_F_HW_VLAN_CTAG_RX | NETIF_F_HW_VLAN_CTAG_TX |
7296 NETIF_F_RXCSUM | NETIF_F_RXHASH | NETIF_F_RXFCS |
7297 NETIF_F_RXALL)))
7298 return 0;
7299
7300 if (changed & NETIF_F_RXFCS) {
7301 if (features & NETIF_F_RXFCS) {
7302 adapter->flags2 &= ~FLAG2_CRC_STRIPPING;
7303 } else {
7304 /* We need to take it back to defaults, which might mean
7305 * stripping is still disabled at the adapter level.
7306 */
7307 if (adapter->flags2 & FLAG2_DFLT_CRC_STRIPPING)
7308 adapter->flags2 |= FLAG2_CRC_STRIPPING;
7309 else
7310 adapter->flags2 &= ~FLAG2_CRC_STRIPPING;
7311 }
7312 }
7313
7314 netdev->features = features;
7315
7316 if (netif_running(netdev))
7317 e1000e_reinit_locked(adapter);
7318 else
7319 e1000e_reset(adapter);
7320
7321 return 1;
7322}
7323
7324static const struct net_device_ops e1000e_netdev_ops = {
7325 .ndo_open = e1000e_open,
7326 .ndo_stop = e1000e_close,
7327 .ndo_start_xmit = e1000_xmit_frame,
7328 .ndo_get_stats64 = e1000e_get_stats64,
7329 .ndo_set_rx_mode = e1000e_set_rx_mode,
7330 .ndo_set_mac_address = e1000_set_mac,
7331 .ndo_change_mtu = e1000_change_mtu,
7332 .ndo_eth_ioctl = e1000_ioctl,
7333 .ndo_tx_timeout = e1000_tx_timeout,
7334 .ndo_validate_addr = eth_validate_addr,
7335
7336 .ndo_vlan_rx_add_vid = e1000_vlan_rx_add_vid,
7337 .ndo_vlan_rx_kill_vid = e1000_vlan_rx_kill_vid,
7338#ifdef CONFIG_NET_POLL_CONTROLLER
7339 .ndo_poll_controller = e1000_netpoll,
7340#endif
7341 .ndo_set_features = e1000_set_features,
7342 .ndo_fix_features = e1000_fix_features,
7343 .ndo_features_check = passthru_features_check,
7344};
7345
7346/**
7347 * e1000_probe - Device Initialization Routine
7348 * @pdev: PCI device information struct
7349 * @ent: entry in e1000_pci_tbl
7350 *
7351 * Returns 0 on success, negative on failure
7352 *
7353 * e1000_probe initializes an adapter identified by a pci_dev structure.
7354 * The OS initialization, configuring of the adapter private structure,
7355 * and a hardware reset occur.
7356 **/
7357static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
7358{
7359 struct net_device *netdev;
7360 struct e1000_adapter *adapter;
7361 struct e1000_hw *hw;
7362 const struct e1000_info *ei = e1000_info_tbl[ent->driver_data];
7363 resource_size_t mmio_start, mmio_len;
7364 resource_size_t flash_start, flash_len;
7365 static int cards_found;
7366 u16 aspm_disable_flag = 0;
7367 u16 eeprom_data = 0;
7368 u16 eeprom_apme_mask = E1000_EEPROM_APME;
7369 int bars, i, err;
7370 s32 ret_val = 0;
7371
7372 if (ei->flags2 & FLAG2_DISABLE_ASPM_L0S)
7373 aspm_disable_flag = PCIE_LINK_STATE_L0S;
7374 if (ei->flags2 & FLAG2_DISABLE_ASPM_L1)
7375 aspm_disable_flag |= PCIE_LINK_STATE_L1;
7376 if (aspm_disable_flag)
7377 e1000e_disable_aspm(pdev, aspm_disable_flag);
7378
7379 err = pci_enable_device_mem(pdev);
7380 if (err)
7381 return err;
7382
7383 err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
7384 if (err) {
7385 dev_err(&pdev->dev,
7386 "No usable DMA configuration, aborting\n");
7387 goto err_dma;
7388 }
7389
7390 bars = pci_select_bars(pdev, IORESOURCE_MEM);
7391 err = pci_request_selected_regions_exclusive(pdev, bars,
7392 e1000e_driver_name);
7393 if (err)
7394 goto err_pci_reg;
7395
7396 pci_set_master(pdev);
7397 /* PCI config space info */
7398 err = pci_save_state(pdev);
7399 if (err)
7400 goto err_alloc_etherdev;
7401
7402 err = -ENOMEM;
7403 netdev = alloc_etherdev(sizeof(struct e1000_adapter));
7404 if (!netdev)
7405 goto err_alloc_etherdev;
7406
7407 SET_NETDEV_DEV(netdev, &pdev->dev);
7408
7409 netdev->irq = pdev->irq;
7410
7411 pci_set_drvdata(pdev, netdev);
7412 adapter = netdev_priv(netdev);
7413 hw = &adapter->hw;
7414 adapter->netdev = netdev;
7415 adapter->pdev = pdev;
7416 adapter->ei = ei;
7417 adapter->pba = ei->pba;
7418 adapter->flags = ei->flags;
7419 adapter->flags2 = ei->flags2;
7420 adapter->hw.adapter = adapter;
7421 adapter->hw.mac.type = ei->mac;
7422 adapter->max_hw_frame_size = ei->max_hw_frame_size;
7423 adapter->msg_enable = netif_msg_init(debug, DEFAULT_MSG_ENABLE);
7424
7425 mmio_start = pci_resource_start(pdev, 0);
7426 mmio_len = pci_resource_len(pdev, 0);
7427
7428 err = -EIO;
7429 adapter->hw.hw_addr = ioremap(mmio_start, mmio_len);
7430 if (!adapter->hw.hw_addr)
7431 goto err_ioremap;
7432
7433 if ((adapter->flags & FLAG_HAS_FLASH) &&
7434 (pci_resource_flags(pdev, 1) & IORESOURCE_MEM) &&
7435 (hw->mac.type < e1000_pch_spt)) {
7436 flash_start = pci_resource_start(pdev, 1);
7437 flash_len = pci_resource_len(pdev, 1);
7438 adapter->hw.flash_address = ioremap(flash_start, flash_len);
7439 if (!adapter->hw.flash_address)
7440 goto err_flashmap;
7441 }
7442
7443 /* Set default EEE advertisement */
7444 if (adapter->flags2 & FLAG2_HAS_EEE)
7445 adapter->eee_advert = MDIO_EEE_100TX | MDIO_EEE_1000T;
7446
7447 /* construct the net_device struct */
7448 netdev->netdev_ops = &e1000e_netdev_ops;
7449 e1000e_set_ethtool_ops(netdev);
7450 netdev->watchdog_timeo = 5 * HZ;
7451 netif_napi_add(netdev, &adapter->napi, e1000e_poll);
7452 strscpy(netdev->name, pci_name(pdev), sizeof(netdev->name));
7453
7454 netdev->mem_start = mmio_start;
7455 netdev->mem_end = mmio_start + mmio_len;
7456
7457 adapter->bd_number = cards_found++;
7458
7459 e1000e_check_options(adapter);
7460
7461 /* setup adapter struct */
7462 err = e1000_sw_init(adapter);
7463 if (err)
7464 goto err_sw_init;
7465
7466 memcpy(&hw->mac.ops, ei->mac_ops, sizeof(hw->mac.ops));
7467 memcpy(&hw->nvm.ops, ei->nvm_ops, sizeof(hw->nvm.ops));
7468 memcpy(&hw->phy.ops, ei->phy_ops, sizeof(hw->phy.ops));
7469
7470 err = ei->get_variants(adapter);
7471 if (err)
7472 goto err_hw_init;
7473
7474 if ((adapter->flags & FLAG_IS_ICH) &&
7475 (adapter->flags & FLAG_READ_ONLY_NVM) &&
7476 (hw->mac.type < e1000_pch_spt))
7477 e1000e_write_protect_nvm_ich8lan(&adapter->hw);
7478
7479 hw->mac.ops.get_bus_info(&adapter->hw);
7480
7481 adapter->hw.phy.autoneg_wait_to_complete = 0;
7482
7483 /* Copper options */
7484 if (adapter->hw.phy.media_type == e1000_media_type_copper) {
7485 adapter->hw.phy.mdix = AUTO_ALL_MODES;
7486 adapter->hw.phy.disable_polarity_correction = 0;
7487 adapter->hw.phy.ms_type = e1000_ms_hw_default;
7488 }
7489
7490 if (hw->phy.ops.check_reset_block && hw->phy.ops.check_reset_block(hw))
7491 dev_info(&pdev->dev,
7492 "PHY reset is blocked due to SOL/IDER session.\n");
7493
7494 /* Set initial default active device features */
7495 netdev->features = (NETIF_F_SG |
7496 NETIF_F_HW_VLAN_CTAG_RX |
7497 NETIF_F_HW_VLAN_CTAG_TX |
7498 NETIF_F_TSO |
7499 NETIF_F_TSO6 |
7500 NETIF_F_RXHASH |
7501 NETIF_F_RXCSUM |
7502 NETIF_F_HW_CSUM);
7503
7504 /* disable TSO for pcie and 10/100 speeds to avoid
7505 * some hardware issues and for i219 to fix transfer
7506 * speed being capped at 60%
7507 */
7508 if (!(adapter->flags & FLAG_TSO_FORCE)) {
7509 switch (adapter->link_speed) {
7510 case SPEED_10:
7511 case SPEED_100:
7512 e_info("10/100 speed: disabling TSO\n");
7513 netdev->features &= ~NETIF_F_TSO;
7514 netdev->features &= ~NETIF_F_TSO6;
7515 break;
7516 case SPEED_1000:
7517 netdev->features |= NETIF_F_TSO;
7518 netdev->features |= NETIF_F_TSO6;
7519 break;
7520 default:
7521 /* oops */
7522 break;
7523 }
7524 if (hw->mac.type == e1000_pch_spt) {
7525 netdev->features &= ~NETIF_F_TSO;
7526 netdev->features &= ~NETIF_F_TSO6;
7527 }
7528 }
7529
7530 /* Set user-changeable features (subset of all device features) */
7531 netdev->hw_features = netdev->features;
7532 netdev->hw_features |= NETIF_F_RXFCS;
7533 netdev->priv_flags |= IFF_SUPP_NOFCS;
7534 netdev->hw_features |= NETIF_F_RXALL;
7535
7536 if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER)
7537 netdev->features |= NETIF_F_HW_VLAN_CTAG_FILTER;
7538
7539 netdev->vlan_features |= (NETIF_F_SG |
7540 NETIF_F_TSO |
7541 NETIF_F_TSO6 |
7542 NETIF_F_HW_CSUM);
7543
7544 netdev->priv_flags |= IFF_UNICAST_FLT;
7545
7546 netdev->features |= NETIF_F_HIGHDMA;
7547 netdev->vlan_features |= NETIF_F_HIGHDMA;
7548
7549 /* MTU range: 68 - max_hw_frame_size */
7550 netdev->min_mtu = ETH_MIN_MTU;
7551 netdev->max_mtu = adapter->max_hw_frame_size -
7552 (VLAN_ETH_HLEN + ETH_FCS_LEN);
7553
7554 if (e1000e_enable_mng_pass_thru(&adapter->hw))
7555 adapter->flags |= FLAG_MNG_PT_ENABLED;
7556
7557 /* before reading the NVM, reset the controller to
7558 * put the device in a known good starting state
7559 */
7560 adapter->hw.mac.ops.reset_hw(&adapter->hw);
7561
7562 /* systems with ASPM and others may see the checksum fail on the first
7563 * attempt. Let's give it a few tries
7564 */
7565 for (i = 0;; i++) {
7566 if (e1000_validate_nvm_checksum(&adapter->hw) >= 0)
7567 break;
7568 if (i == 2) {
7569 dev_err(&pdev->dev, "The NVM Checksum Is Not Valid\n");
7570 err = -EIO;
7571 goto err_eeprom;
7572 }
7573 }
7574
7575 e1000_eeprom_checks(adapter);
7576
7577 /* copy the MAC address */
7578 if (e1000e_read_mac_addr(&adapter->hw))
7579 dev_err(&pdev->dev,
7580 "NVM Read Error while reading MAC address\n");
7581
7582 eth_hw_addr_set(netdev, adapter->hw.mac.addr);
7583
7584 if (!is_valid_ether_addr(netdev->dev_addr)) {
7585 dev_err(&pdev->dev, "Invalid MAC Address: %pM\n",
7586 netdev->dev_addr);
7587 err = -EIO;
7588 goto err_eeprom;
7589 }
7590
7591 timer_setup(&adapter->watchdog_timer, e1000_watchdog, 0);
7592 timer_setup(&adapter->phy_info_timer, e1000_update_phy_info, 0);
7593
7594 INIT_WORK(&adapter->reset_task, e1000_reset_task);
7595 INIT_WORK(&adapter->watchdog_task, e1000_watchdog_task);
7596 INIT_WORK(&adapter->downshift_task, e1000e_downshift_workaround);
7597 INIT_WORK(&adapter->update_phy_task, e1000e_update_phy_task);
7598 INIT_WORK(&adapter->print_hang_task, e1000_print_hw_hang);
7599
7600 /* Initialize link parameters. User can change them with ethtool */
7601 adapter->hw.mac.autoneg = 1;
7602 adapter->fc_autoneg = true;
7603 adapter->hw.fc.requested_mode = e1000_fc_default;
7604 adapter->hw.fc.current_mode = e1000_fc_default;
7605 adapter->hw.phy.autoneg_advertised = 0x2f;
7606
7607 /* Initial Wake on LAN setting - If APM wake is enabled in
7608 * the EEPROM, enable the ACPI Magic Packet filter
7609 */
7610 if (adapter->flags & FLAG_APME_IN_WUC) {
7611 /* APME bit in EEPROM is mapped to WUC.APME */
7612 eeprom_data = er32(WUC);
7613 eeprom_apme_mask = E1000_WUC_APME;
7614 if ((hw->mac.type > e1000_ich10lan) &&
7615 (eeprom_data & E1000_WUC_PHY_WAKE))
7616 adapter->flags2 |= FLAG2_HAS_PHY_WAKEUP;
7617 } else if (adapter->flags & FLAG_APME_IN_CTRL3) {
7618 if (adapter->flags & FLAG_APME_CHECK_PORT_B &&
7619 (adapter->hw.bus.func == 1))
7620 ret_val = e1000_read_nvm(&adapter->hw,
7621 NVM_INIT_CONTROL3_PORT_B,
7622 1, &eeprom_data);
7623 else
7624 ret_val = e1000_read_nvm(&adapter->hw,
7625 NVM_INIT_CONTROL3_PORT_A,
7626 1, &eeprom_data);
7627 }
7628
7629 /* fetch WoL from EEPROM */
7630 if (ret_val)
7631 e_dbg("NVM read error getting WoL initial values: %d\n", ret_val);
7632 else if (eeprom_data & eeprom_apme_mask)
7633 adapter->eeprom_wol |= E1000_WUFC_MAG;
7634
7635 /* now that we have the eeprom settings, apply the special cases
7636 * where the eeprom may be wrong or the board simply won't support
7637 * wake on lan on a particular port
7638 */
7639 if (!(adapter->flags & FLAG_HAS_WOL))
7640 adapter->eeprom_wol = 0;
7641
7642 /* initialize the wol settings based on the eeprom settings */
7643 adapter->wol = adapter->eeprom_wol;
7644
7645 /* make sure adapter isn't asleep if manageability is enabled */
7646 if (adapter->wol || (adapter->flags & FLAG_MNG_PT_ENABLED) ||
7647 (hw->mac.ops.check_mng_mode(hw)))
7648 device_wakeup_enable(&pdev->dev);
7649
7650 /* save off EEPROM version number */
7651 ret_val = e1000_read_nvm(&adapter->hw, 5, 1, &adapter->eeprom_vers);
7652
7653 if (ret_val) {
7654 e_dbg("NVM read error getting EEPROM version: %d\n", ret_val);
7655 adapter->eeprom_vers = 0;
7656 }
7657
7658 /* init PTP hardware clock */
7659 e1000e_ptp_init(adapter);
7660
7661 /* reset the hardware with the new settings */
7662 e1000e_reset(adapter);
7663
7664 /* If the controller has AMT, do not set DRV_LOAD until the interface
7665 * is up. For all other cases, let the f/w know that the h/w is now
7666 * under the control of the driver.
7667 */
7668 if (!(adapter->flags & FLAG_HAS_AMT))
7669 e1000e_get_hw_control(adapter);
7670
7671 if (hw->mac.type >= e1000_pch_cnp)
7672 adapter->flags2 |= FLAG2_ENABLE_S0IX_FLOWS;
7673
7674 strscpy(netdev->name, "eth%d", sizeof(netdev->name));
7675 err = register_netdev(netdev);
7676 if (err)
7677 goto err_register;
7678
7679 /* carrier off reporting is important to ethtool even BEFORE open */
7680 netif_carrier_off(netdev);
7681
7682 e1000_print_device_info(adapter);
7683
7684 dev_pm_set_driver_flags(&pdev->dev, DPM_FLAG_SMART_PREPARE);
7685
7686 if (pci_dev_run_wake(pdev))
7687 pm_runtime_put_noidle(&pdev->dev);
7688
7689 return 0;
7690
7691err_register:
7692 if (!(adapter->flags & FLAG_HAS_AMT))
7693 e1000e_release_hw_control(adapter);
7694err_eeprom:
7695 if (hw->phy.ops.check_reset_block && !hw->phy.ops.check_reset_block(hw))
7696 e1000_phy_hw_reset(&adapter->hw);
7697err_hw_init:
7698 kfree(adapter->tx_ring);
7699 kfree(adapter->rx_ring);
7700err_sw_init:
7701 if ((adapter->hw.flash_address) && (hw->mac.type < e1000_pch_spt))
7702 iounmap(adapter->hw.flash_address);
7703 e1000e_reset_interrupt_capability(adapter);
7704err_flashmap:
7705 iounmap(adapter->hw.hw_addr);
7706err_ioremap:
7707 free_netdev(netdev);
7708err_alloc_etherdev:
7709 pci_release_mem_regions(pdev);
7710err_pci_reg:
7711err_dma:
7712 pci_disable_device(pdev);
7713 return err;
7714}
7715
7716/**
7717 * e1000_remove - Device Removal Routine
7718 * @pdev: PCI device information struct
7719 *
7720 * e1000_remove is called by the PCI subsystem to alert the driver
7721 * that it should release a PCI device. This could be caused by a
7722 * Hot-Plug event, or because the driver is going to be removed from
7723 * memory.
7724 **/
7725static void e1000_remove(struct pci_dev *pdev)
7726{
7727 struct net_device *netdev = pci_get_drvdata(pdev);
7728 struct e1000_adapter *adapter = netdev_priv(netdev);
7729
7730 e1000e_ptp_remove(adapter);
7731
7732 /* The timers may be rescheduled, so explicitly disable them
7733 * from being rescheduled.
7734 */
7735 set_bit(__E1000_DOWN, &adapter->state);
7736 del_timer_sync(&adapter->watchdog_timer);
7737 del_timer_sync(&adapter->phy_info_timer);
7738
7739 cancel_work_sync(&adapter->reset_task);
7740 cancel_work_sync(&adapter->watchdog_task);
7741 cancel_work_sync(&adapter->downshift_task);
7742 cancel_work_sync(&adapter->update_phy_task);
7743 cancel_work_sync(&adapter->print_hang_task);
7744
7745 if (adapter->flags & FLAG_HAS_HW_TIMESTAMP) {
7746 cancel_work_sync(&adapter->tx_hwtstamp_work);
7747 if (adapter->tx_hwtstamp_skb) {
7748 dev_consume_skb_any(adapter->tx_hwtstamp_skb);
7749 adapter->tx_hwtstamp_skb = NULL;
7750 }
7751 }
7752
7753 unregister_netdev(netdev);
7754
7755 if (pci_dev_run_wake(pdev))
7756 pm_runtime_get_noresume(&pdev->dev);
7757
7758 /* Release control of h/w to f/w. If f/w is AMT enabled, this
7759 * would have already happened in close and is redundant.
7760 */
7761 e1000e_release_hw_control(adapter);
7762
7763 e1000e_reset_interrupt_capability(adapter);
7764 kfree(adapter->tx_ring);
7765 kfree(adapter->rx_ring);
7766
7767 iounmap(adapter->hw.hw_addr);
7768 if ((adapter->hw.flash_address) &&
7769 (adapter->hw.mac.type < e1000_pch_spt))
7770 iounmap(adapter->hw.flash_address);
7771 pci_release_mem_regions(pdev);
7772
7773 free_netdev(netdev);
7774
7775 pci_disable_device(pdev);
7776}
7777
7778/* PCI Error Recovery (ERS) */
7779static const struct pci_error_handlers e1000_err_handler = {
7780 .error_detected = e1000_io_error_detected,
7781 .slot_reset = e1000_io_slot_reset,
7782 .resume = e1000_io_resume,
7783};
7784
7785static const struct pci_device_id e1000_pci_tbl[] = {
7786 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_COPPER), board_82571 },
7787 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_FIBER), board_82571 },
7788 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_COPPER), board_82571 },
7789 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_COPPER_LP),
7790 board_82571 },
7791 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_FIBER), board_82571 },
7792 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_SERDES), board_82571 },
7793 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_SERDES_DUAL), board_82571 },
7794 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_SERDES_QUAD), board_82571 },
7795 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571PT_QUAD_COPPER), board_82571 },
7796
7797 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI), board_82572 },
7798 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI_COPPER), board_82572 },
7799 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI_FIBER), board_82572 },
7800 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI_SERDES), board_82572 },
7801
7802 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82573E), board_82573 },
7803 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82573E_IAMT), board_82573 },
7804 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82573L), board_82573 },
7805
7806 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82574L), board_82574 },
7807 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82574LA), board_82574 },
7808 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82583V), board_82583 },
7809
7810 { PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_COPPER_DPT),
7811 board_80003es2lan },
7812 { PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_COPPER_SPT),
7813 board_80003es2lan },
7814 { PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_SERDES_DPT),
7815 board_80003es2lan },
7816 { PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_SERDES_SPT),
7817 board_80003es2lan },
7818
7819 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IFE), board_ich8lan },
7820 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IFE_G), board_ich8lan },
7821 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IFE_GT), board_ich8lan },
7822 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_AMT), board_ich8lan },
7823 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_C), board_ich8lan },
7824 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_M), board_ich8lan },
7825 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_M_AMT), board_ich8lan },
7826 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_82567V_3), board_ich8lan },
7827
7828 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IFE), board_ich9lan },
7829 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IFE_G), board_ich9lan },
7830 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IFE_GT), board_ich9lan },
7831 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_AMT), board_ich9lan },
7832 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_C), board_ich9lan },
7833 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_BM), board_ich9lan },
7834 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_M), board_ich9lan },
7835 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_M_AMT), board_ich9lan },
7836 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_M_V), board_ich9lan },
7837
7838 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_R_BM_LM), board_ich9lan },
7839 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_R_BM_LF), board_ich9lan },
7840 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_R_BM_V), board_ich9lan },
7841
7842 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_D_BM_LM), board_ich10lan },
7843 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_D_BM_LF), board_ich10lan },
7844 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_D_BM_V), board_ich10lan },
7845
7846 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_M_HV_LM), board_pchlan },
7847 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_M_HV_LC), board_pchlan },
7848 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_D_HV_DM), board_pchlan },
7849 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_D_HV_DC), board_pchlan },
7850
7851 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH2_LV_LM), board_pch2lan },
7852 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH2_LV_V), board_pch2lan },
7853
7854 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_LPT_I217_LM), board_pch_lpt },
7855 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_LPT_I217_V), board_pch_lpt },
7856 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_LPTLP_I218_LM), board_pch_lpt },
7857 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_LPTLP_I218_V), board_pch_lpt },
7858 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_I218_LM2), board_pch_lpt },
7859 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_I218_V2), board_pch_lpt },
7860 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_I218_LM3), board_pch_lpt },
7861 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_I218_V3), board_pch_lpt },
7862 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_SPT_I219_LM), board_pch_spt },
7863 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_SPT_I219_V), board_pch_spt },
7864 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_SPT_I219_LM2), board_pch_spt },
7865 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_SPT_I219_V2), board_pch_spt },
7866 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_LBG_I219_LM3), board_pch_spt },
7867 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_SPT_I219_LM4), board_pch_spt },
7868 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_SPT_I219_V4), board_pch_spt },
7869 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_SPT_I219_LM5), board_pch_spt },
7870 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_SPT_I219_V5), board_pch_spt },
7871 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_CNP_I219_LM6), board_pch_cnp },
7872 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_CNP_I219_V6), board_pch_cnp },
7873 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_CNP_I219_LM7), board_pch_cnp },
7874 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_CNP_I219_V7), board_pch_cnp },
7875 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_ICP_I219_LM8), board_pch_cnp },
7876 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_ICP_I219_V8), board_pch_cnp },
7877 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_ICP_I219_LM9), board_pch_cnp },
7878 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_ICP_I219_V9), board_pch_cnp },
7879 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_CMP_I219_LM10), board_pch_cnp },
7880 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_CMP_I219_V10), board_pch_cnp },
7881 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_CMP_I219_LM11), board_pch_cnp },
7882 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_CMP_I219_V11), board_pch_cnp },
7883 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_CMP_I219_LM12), board_pch_spt },
7884 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_CMP_I219_V12), board_pch_spt },
7885 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_TGP_I219_LM13), board_pch_tgp },
7886 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_TGP_I219_V13), board_pch_tgp },
7887 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_TGP_I219_LM14), board_pch_tgp },
7888 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_TGP_I219_V14), board_pch_tgp },
7889 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_TGP_I219_LM15), board_pch_tgp },
7890 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_TGP_I219_V15), board_pch_tgp },
7891 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_RPL_I219_LM23), board_pch_adp },
7892 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_RPL_I219_V23), board_pch_adp },
7893 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_ADP_I219_LM16), board_pch_adp },
7894 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_ADP_I219_V16), board_pch_adp },
7895 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_ADP_I219_LM17), board_pch_adp },
7896 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_ADP_I219_V17), board_pch_adp },
7897 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_RPL_I219_LM22), board_pch_adp },
7898 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_RPL_I219_V22), board_pch_adp },
7899 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_MTP_I219_LM18), board_pch_mtp },
7900 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_MTP_I219_V18), board_pch_mtp },
7901 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_MTP_I219_LM19), board_pch_mtp },
7902 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_MTP_I219_V19), board_pch_mtp },
7903 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_LNP_I219_LM20), board_pch_mtp },
7904 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_LNP_I219_V20), board_pch_mtp },
7905 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_LNP_I219_LM21), board_pch_mtp },
7906 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_LNP_I219_V21), board_pch_mtp },
7907 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_ARL_I219_LM24), board_pch_mtp },
7908 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_ARL_I219_V24), board_pch_mtp },
7909 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_PTP_I219_LM25), board_pch_mtp },
7910 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_PTP_I219_V25), board_pch_mtp },
7911 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_PTP_I219_LM26), board_pch_mtp },
7912 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_PTP_I219_V26), board_pch_mtp },
7913 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_PTP_I219_LM27), board_pch_mtp },
7914 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_PTP_I219_V27), board_pch_mtp },
7915 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_NVL_I219_LM29), board_pch_mtp },
7916 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_NVL_I219_V29), board_pch_mtp },
7917
7918 { 0, 0, 0, 0, 0, 0, 0 } /* terminate list */
7919};
7920MODULE_DEVICE_TABLE(pci, e1000_pci_tbl);
7921
7922static const struct dev_pm_ops e1000_pm_ops = {
7923#ifdef CONFIG_PM_SLEEP
7924 .prepare = e1000e_pm_prepare,
7925 .suspend = e1000e_pm_suspend,
7926 .resume = e1000e_pm_resume,
7927 .freeze = e1000e_pm_freeze,
7928 .thaw = e1000e_pm_thaw,
7929 .poweroff = e1000e_pm_suspend,
7930 .restore = e1000e_pm_resume,
7931#endif
7932 SET_RUNTIME_PM_OPS(e1000e_pm_runtime_suspend, e1000e_pm_runtime_resume,
7933 e1000e_pm_runtime_idle)
7934};
7935
7936/* PCI Device API Driver */
7937static struct pci_driver e1000_driver = {
7938 .name = e1000e_driver_name,
7939 .id_table = e1000_pci_tbl,
7940 .probe = e1000_probe,
7941 .remove = e1000_remove,
7942 .driver = {
7943 .pm = &e1000_pm_ops,
7944 },
7945 .shutdown = e1000_shutdown,
7946 .err_handler = &e1000_err_handler
7947};
7948
7949/**
7950 * e1000_init_module - Driver Registration Routine
7951 *
7952 * e1000_init_module is the first routine called when the driver is
7953 * loaded. All it does is register with the PCI subsystem.
7954 **/
7955static int __init e1000_init_module(void)
7956{
7957 pr_info("Intel(R) PRO/1000 Network Driver\n");
7958 pr_info("Copyright(c) 1999 - 2015 Intel Corporation.\n");
7959
7960 return pci_register_driver(&e1000_driver);
7961}
7962module_init(e1000_init_module);
7963
7964/**
7965 * e1000_exit_module - Driver Exit Cleanup Routine
7966 *
7967 * e1000_exit_module is called just before the driver is removed
7968 * from memory.
7969 **/
7970static void __exit e1000_exit_module(void)
7971{
7972 pci_unregister_driver(&e1000_driver);
7973}
7974module_exit(e1000_exit_module);
7975
7976MODULE_AUTHOR("Intel Corporation, <linux.nics@intel.com>");
7977MODULE_DESCRIPTION("Intel(R) PRO/1000 Network Driver");
7978MODULE_LICENSE("GPL v2");
7979
7980/* netdev.c */
1// SPDX-License-Identifier: GPL-2.0
2/* Intel PRO/1000 Linux driver
3 * Copyright(c) 1999 - 2015 Intel Corporation.
4 *
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms and conditions of the GNU General Public License,
7 * version 2, as published by the Free Software Foundation.
8 *
9 * This program is distributed in the hope it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
12 * more details.
13 *
14 * The full GNU General Public License is included in this distribution in
15 * the file called "COPYING".
16 *
17 * Contact Information:
18 * Linux NICS <linux.nics@intel.com>
19 * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
20 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
21 */
22
23#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
24
25#include <linux/module.h>
26#include <linux/types.h>
27#include <linux/init.h>
28#include <linux/pci.h>
29#include <linux/vmalloc.h>
30#include <linux/pagemap.h>
31#include <linux/delay.h>
32#include <linux/netdevice.h>
33#include <linux/interrupt.h>
34#include <linux/tcp.h>
35#include <linux/ipv6.h>
36#include <linux/slab.h>
37#include <net/checksum.h>
38#include <net/ip6_checksum.h>
39#include <linux/ethtool.h>
40#include <linux/if_vlan.h>
41#include <linux/cpu.h>
42#include <linux/smp.h>
43#include <linux/pm_qos.h>
44#include <linux/pm_runtime.h>
45#include <linux/aer.h>
46#include <linux/prefetch.h>
47
48#include "e1000.h"
49
50#define DRV_EXTRAVERSION "-k"
51
52#define DRV_VERSION "3.2.6" DRV_EXTRAVERSION
53char e1000e_driver_name[] = "e1000e";
54const char e1000e_driver_version[] = DRV_VERSION;
55
56#define DEFAULT_MSG_ENABLE (NETIF_MSG_DRV|NETIF_MSG_PROBE|NETIF_MSG_LINK)
57static int debug = -1;
58module_param(debug, int, 0);
59MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
60
61static const struct e1000_info *e1000_info_tbl[] = {
62 [board_82571] = &e1000_82571_info,
63 [board_82572] = &e1000_82572_info,
64 [board_82573] = &e1000_82573_info,
65 [board_82574] = &e1000_82574_info,
66 [board_82583] = &e1000_82583_info,
67 [board_80003es2lan] = &e1000_es2_info,
68 [board_ich8lan] = &e1000_ich8_info,
69 [board_ich9lan] = &e1000_ich9_info,
70 [board_ich10lan] = &e1000_ich10_info,
71 [board_pchlan] = &e1000_pch_info,
72 [board_pch2lan] = &e1000_pch2_info,
73 [board_pch_lpt] = &e1000_pch_lpt_info,
74 [board_pch_spt] = &e1000_pch_spt_info,
75 [board_pch_cnp] = &e1000_pch_cnp_info,
76};
77
78struct e1000_reg_info {
79 u32 ofs;
80 char *name;
81};
82
83static const struct e1000_reg_info e1000_reg_info_tbl[] = {
84 /* General Registers */
85 {E1000_CTRL, "CTRL"},
86 {E1000_STATUS, "STATUS"},
87 {E1000_CTRL_EXT, "CTRL_EXT"},
88
89 /* Interrupt Registers */
90 {E1000_ICR, "ICR"},
91
92 /* Rx Registers */
93 {E1000_RCTL, "RCTL"},
94 {E1000_RDLEN(0), "RDLEN"},
95 {E1000_RDH(0), "RDH"},
96 {E1000_RDT(0), "RDT"},
97 {E1000_RDTR, "RDTR"},
98 {E1000_RXDCTL(0), "RXDCTL"},
99 {E1000_ERT, "ERT"},
100 {E1000_RDBAL(0), "RDBAL"},
101 {E1000_RDBAH(0), "RDBAH"},
102 {E1000_RDFH, "RDFH"},
103 {E1000_RDFT, "RDFT"},
104 {E1000_RDFHS, "RDFHS"},
105 {E1000_RDFTS, "RDFTS"},
106 {E1000_RDFPC, "RDFPC"},
107
108 /* Tx Registers */
109 {E1000_TCTL, "TCTL"},
110 {E1000_TDBAL(0), "TDBAL"},
111 {E1000_TDBAH(0), "TDBAH"},
112 {E1000_TDLEN(0), "TDLEN"},
113 {E1000_TDH(0), "TDH"},
114 {E1000_TDT(0), "TDT"},
115 {E1000_TIDV, "TIDV"},
116 {E1000_TXDCTL(0), "TXDCTL"},
117 {E1000_TADV, "TADV"},
118 {E1000_TARC(0), "TARC"},
119 {E1000_TDFH, "TDFH"},
120 {E1000_TDFT, "TDFT"},
121 {E1000_TDFHS, "TDFHS"},
122 {E1000_TDFTS, "TDFTS"},
123 {E1000_TDFPC, "TDFPC"},
124
125 /* List Terminator */
126 {0, NULL}
127};
128
129/**
130 * __ew32_prepare - prepare to write to MAC CSR register on certain parts
131 * @hw: pointer to the HW structure
132 *
133 * When updating the MAC CSR registers, the Manageability Engine (ME) could
134 * be accessing the registers at the same time. Normally, this is handled in
135 * h/w by an arbiter but on some parts there is a bug that acknowledges Host
136 * accesses later than it should which could result in the register to have
137 * an incorrect value. Workaround this by checking the FWSM register which
138 * has bit 24 set while ME is accessing MAC CSR registers, wait if it is set
139 * and try again a number of times.
140 **/
141s32 __ew32_prepare(struct e1000_hw *hw)
142{
143 s32 i = E1000_ICH_FWSM_PCIM2PCI_COUNT;
144
145 while ((er32(FWSM) & E1000_ICH_FWSM_PCIM2PCI) && --i)
146 udelay(50);
147
148 return i;
149}
150
151void __ew32(struct e1000_hw *hw, unsigned long reg, u32 val)
152{
153 if (hw->adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA)
154 __ew32_prepare(hw);
155
156 writel(val, hw->hw_addr + reg);
157}
158
159/**
160 * e1000_regdump - register printout routine
161 * @hw: pointer to the HW structure
162 * @reginfo: pointer to the register info table
163 **/
164static void e1000_regdump(struct e1000_hw *hw, struct e1000_reg_info *reginfo)
165{
166 int n = 0;
167 char rname[16];
168 u32 regs[8];
169
170 switch (reginfo->ofs) {
171 case E1000_RXDCTL(0):
172 for (n = 0; n < 2; n++)
173 regs[n] = __er32(hw, E1000_RXDCTL(n));
174 break;
175 case E1000_TXDCTL(0):
176 for (n = 0; n < 2; n++)
177 regs[n] = __er32(hw, E1000_TXDCTL(n));
178 break;
179 case E1000_TARC(0):
180 for (n = 0; n < 2; n++)
181 regs[n] = __er32(hw, E1000_TARC(n));
182 break;
183 default:
184 pr_info("%-15s %08x\n",
185 reginfo->name, __er32(hw, reginfo->ofs));
186 return;
187 }
188
189 snprintf(rname, 16, "%s%s", reginfo->name, "[0-1]");
190 pr_info("%-15s %08x %08x\n", rname, regs[0], regs[1]);
191}
192
193static void e1000e_dump_ps_pages(struct e1000_adapter *adapter,
194 struct e1000_buffer *bi)
195{
196 int i;
197 struct e1000_ps_page *ps_page;
198
199 for (i = 0; i < adapter->rx_ps_pages; i++) {
200 ps_page = &bi->ps_pages[i];
201
202 if (ps_page->page) {
203 pr_info("packet dump for ps_page %d:\n", i);
204 print_hex_dump(KERN_INFO, "", DUMP_PREFIX_ADDRESS,
205 16, 1, page_address(ps_page->page),
206 PAGE_SIZE, true);
207 }
208 }
209}
210
211/**
212 * e1000e_dump - Print registers, Tx-ring and Rx-ring
213 * @adapter: board private structure
214 **/
215static void e1000e_dump(struct e1000_adapter *adapter)
216{
217 struct net_device *netdev = adapter->netdev;
218 struct e1000_hw *hw = &adapter->hw;
219 struct e1000_reg_info *reginfo;
220 struct e1000_ring *tx_ring = adapter->tx_ring;
221 struct e1000_tx_desc *tx_desc;
222 struct my_u0 {
223 __le64 a;
224 __le64 b;
225 } *u0;
226 struct e1000_buffer *buffer_info;
227 struct e1000_ring *rx_ring = adapter->rx_ring;
228 union e1000_rx_desc_packet_split *rx_desc_ps;
229 union e1000_rx_desc_extended *rx_desc;
230 struct my_u1 {
231 __le64 a;
232 __le64 b;
233 __le64 c;
234 __le64 d;
235 } *u1;
236 u32 staterr;
237 int i = 0;
238
239 if (!netif_msg_hw(adapter))
240 return;
241
242 /* Print netdevice Info */
243 if (netdev) {
244 dev_info(&adapter->pdev->dev, "Net device Info\n");
245 pr_info("Device Name state trans_start\n");
246 pr_info("%-15s %016lX %016lX\n", netdev->name,
247 netdev->state, dev_trans_start(netdev));
248 }
249
250 /* Print Registers */
251 dev_info(&adapter->pdev->dev, "Register Dump\n");
252 pr_info(" Register Name Value\n");
253 for (reginfo = (struct e1000_reg_info *)e1000_reg_info_tbl;
254 reginfo->name; reginfo++) {
255 e1000_regdump(hw, reginfo);
256 }
257
258 /* Print Tx Ring Summary */
259 if (!netdev || !netif_running(netdev))
260 return;
261
262 dev_info(&adapter->pdev->dev, "Tx Ring Summary\n");
263 pr_info("Queue [NTU] [NTC] [bi(ntc)->dma ] leng ntw timestamp\n");
264 buffer_info = &tx_ring->buffer_info[tx_ring->next_to_clean];
265 pr_info(" %5d %5X %5X %016llX %04X %3X %016llX\n",
266 0, tx_ring->next_to_use, tx_ring->next_to_clean,
267 (unsigned long long)buffer_info->dma,
268 buffer_info->length,
269 buffer_info->next_to_watch,
270 (unsigned long long)buffer_info->time_stamp);
271
272 /* Print Tx Ring */
273 if (!netif_msg_tx_done(adapter))
274 goto rx_ring_summary;
275
276 dev_info(&adapter->pdev->dev, "Tx Ring Dump\n");
277
278 /* Transmit Descriptor Formats - DEXT[29] is 0 (Legacy) or 1 (Extended)
279 *
280 * Legacy Transmit Descriptor
281 * +--------------------------------------------------------------+
282 * 0 | Buffer Address [63:0] (Reserved on Write Back) |
283 * +--------------------------------------------------------------+
284 * 8 | Special | CSS | Status | CMD | CSO | Length |
285 * +--------------------------------------------------------------+
286 * 63 48 47 36 35 32 31 24 23 16 15 0
287 *
288 * Extended Context Descriptor (DTYP=0x0) for TSO or checksum offload
289 * 63 48 47 40 39 32 31 16 15 8 7 0
290 * +----------------------------------------------------------------+
291 * 0 | TUCSE | TUCS0 | TUCSS | IPCSE | IPCS0 | IPCSS |
292 * +----------------------------------------------------------------+
293 * 8 | MSS | HDRLEN | RSV | STA | TUCMD | DTYP | PAYLEN |
294 * +----------------------------------------------------------------+
295 * 63 48 47 40 39 36 35 32 31 24 23 20 19 0
296 *
297 * Extended Data Descriptor (DTYP=0x1)
298 * +----------------------------------------------------------------+
299 * 0 | Buffer Address [63:0] |
300 * +----------------------------------------------------------------+
301 * 8 | VLAN tag | POPTS | Rsvd | Status | Command | DTYP | DTALEN |
302 * +----------------------------------------------------------------+
303 * 63 48 47 40 39 36 35 32 31 24 23 20 19 0
304 */
305 pr_info("Tl[desc] [address 63:0 ] [SpeCssSCmCsLen] [bi->dma ] leng ntw timestamp bi->skb <-- Legacy format\n");
306 pr_info("Tc[desc] [Ce CoCsIpceCoS] [MssHlRSCm0Plen] [bi->dma ] leng ntw timestamp bi->skb <-- Ext Context format\n");
307 pr_info("Td[desc] [address 63:0 ] [VlaPoRSCm1Dlen] [bi->dma ] leng ntw timestamp bi->skb <-- Ext Data format\n");
308 for (i = 0; tx_ring->desc && (i < tx_ring->count); i++) {
309 const char *next_desc;
310 tx_desc = E1000_TX_DESC(*tx_ring, i);
311 buffer_info = &tx_ring->buffer_info[i];
312 u0 = (struct my_u0 *)tx_desc;
313 if (i == tx_ring->next_to_use && i == tx_ring->next_to_clean)
314 next_desc = " NTC/U";
315 else if (i == tx_ring->next_to_use)
316 next_desc = " NTU";
317 else if (i == tx_ring->next_to_clean)
318 next_desc = " NTC";
319 else
320 next_desc = "";
321 pr_info("T%c[0x%03X] %016llX %016llX %016llX %04X %3X %016llX %p%s\n",
322 (!(le64_to_cpu(u0->b) & BIT(29)) ? 'l' :
323 ((le64_to_cpu(u0->b) & BIT(20)) ? 'd' : 'c')),
324 i,
325 (unsigned long long)le64_to_cpu(u0->a),
326 (unsigned long long)le64_to_cpu(u0->b),
327 (unsigned long long)buffer_info->dma,
328 buffer_info->length, buffer_info->next_to_watch,
329 (unsigned long long)buffer_info->time_stamp,
330 buffer_info->skb, next_desc);
331
332 if (netif_msg_pktdata(adapter) && buffer_info->skb)
333 print_hex_dump(KERN_INFO, "", DUMP_PREFIX_ADDRESS,
334 16, 1, buffer_info->skb->data,
335 buffer_info->skb->len, true);
336 }
337
338 /* Print Rx Ring Summary */
339rx_ring_summary:
340 dev_info(&adapter->pdev->dev, "Rx Ring Summary\n");
341 pr_info("Queue [NTU] [NTC]\n");
342 pr_info(" %5d %5X %5X\n",
343 0, rx_ring->next_to_use, rx_ring->next_to_clean);
344
345 /* Print Rx Ring */
346 if (!netif_msg_rx_status(adapter))
347 return;
348
349 dev_info(&adapter->pdev->dev, "Rx Ring Dump\n");
350 switch (adapter->rx_ps_pages) {
351 case 1:
352 case 2:
353 case 3:
354 /* [Extended] Packet Split Receive Descriptor Format
355 *
356 * +-----------------------------------------------------+
357 * 0 | Buffer Address 0 [63:0] |
358 * +-----------------------------------------------------+
359 * 8 | Buffer Address 1 [63:0] |
360 * +-----------------------------------------------------+
361 * 16 | Buffer Address 2 [63:0] |
362 * +-----------------------------------------------------+
363 * 24 | Buffer Address 3 [63:0] |
364 * +-----------------------------------------------------+
365 */
366 pr_info("R [desc] [buffer 0 63:0 ] [buffer 1 63:0 ] [buffer 2 63:0 ] [buffer 3 63:0 ] [bi->dma ] [bi->skb] <-- Ext Pkt Split format\n");
367 /* [Extended] Receive Descriptor (Write-Back) Format
368 *
369 * 63 48 47 32 31 13 12 8 7 4 3 0
370 * +------------------------------------------------------+
371 * 0 | Packet | IP | Rsvd | MRQ | Rsvd | MRQ RSS |
372 * | Checksum | Ident | | Queue | | Type |
373 * +------------------------------------------------------+
374 * 8 | VLAN Tag | Length | Extended Error | Extended Status |
375 * +------------------------------------------------------+
376 * 63 48 47 32 31 20 19 0
377 */
378 pr_info("RWB[desc] [ck ipid mrqhsh] [vl l0 ee es] [ l3 l2 l1 hs] [reserved ] ---------------- [bi->skb] <-- Ext Rx Write-Back format\n");
379 for (i = 0; i < rx_ring->count; i++) {
380 const char *next_desc;
381 buffer_info = &rx_ring->buffer_info[i];
382 rx_desc_ps = E1000_RX_DESC_PS(*rx_ring, i);
383 u1 = (struct my_u1 *)rx_desc_ps;
384 staterr =
385 le32_to_cpu(rx_desc_ps->wb.middle.status_error);
386
387 if (i == rx_ring->next_to_use)
388 next_desc = " NTU";
389 else if (i == rx_ring->next_to_clean)
390 next_desc = " NTC";
391 else
392 next_desc = "";
393
394 if (staterr & E1000_RXD_STAT_DD) {
395 /* Descriptor Done */
396 pr_info("%s[0x%03X] %016llX %016llX %016llX %016llX ---------------- %p%s\n",
397 "RWB", i,
398 (unsigned long long)le64_to_cpu(u1->a),
399 (unsigned long long)le64_to_cpu(u1->b),
400 (unsigned long long)le64_to_cpu(u1->c),
401 (unsigned long long)le64_to_cpu(u1->d),
402 buffer_info->skb, next_desc);
403 } else {
404 pr_info("%s[0x%03X] %016llX %016llX %016llX %016llX %016llX %p%s\n",
405 "R ", i,
406 (unsigned long long)le64_to_cpu(u1->a),
407 (unsigned long long)le64_to_cpu(u1->b),
408 (unsigned long long)le64_to_cpu(u1->c),
409 (unsigned long long)le64_to_cpu(u1->d),
410 (unsigned long long)buffer_info->dma,
411 buffer_info->skb, next_desc);
412
413 if (netif_msg_pktdata(adapter))
414 e1000e_dump_ps_pages(adapter,
415 buffer_info);
416 }
417 }
418 break;
419 default:
420 case 0:
421 /* Extended Receive Descriptor (Read) Format
422 *
423 * +-----------------------------------------------------+
424 * 0 | Buffer Address [63:0] |
425 * +-----------------------------------------------------+
426 * 8 | Reserved |
427 * +-----------------------------------------------------+
428 */
429 pr_info("R [desc] [buf addr 63:0 ] [reserved 63:0 ] [bi->dma ] [bi->skb] <-- Ext (Read) format\n");
430 /* Extended Receive Descriptor (Write-Back) Format
431 *
432 * 63 48 47 32 31 24 23 4 3 0
433 * +------------------------------------------------------+
434 * | RSS Hash | | | |
435 * 0 +-------------------+ Rsvd | Reserved | MRQ RSS |
436 * | Packet | IP | | | Type |
437 * | Checksum | Ident | | | |
438 * +------------------------------------------------------+
439 * 8 | VLAN Tag | Length | Extended Error | Extended Status |
440 * +------------------------------------------------------+
441 * 63 48 47 32 31 20 19 0
442 */
443 pr_info("RWB[desc] [cs ipid mrq] [vt ln xe xs] [bi->skb] <-- Ext (Write-Back) format\n");
444
445 for (i = 0; i < rx_ring->count; i++) {
446 const char *next_desc;
447
448 buffer_info = &rx_ring->buffer_info[i];
449 rx_desc = E1000_RX_DESC_EXT(*rx_ring, i);
450 u1 = (struct my_u1 *)rx_desc;
451 staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
452
453 if (i == rx_ring->next_to_use)
454 next_desc = " NTU";
455 else if (i == rx_ring->next_to_clean)
456 next_desc = " NTC";
457 else
458 next_desc = "";
459
460 if (staterr & E1000_RXD_STAT_DD) {
461 /* Descriptor Done */
462 pr_info("%s[0x%03X] %016llX %016llX ---------------- %p%s\n",
463 "RWB", i,
464 (unsigned long long)le64_to_cpu(u1->a),
465 (unsigned long long)le64_to_cpu(u1->b),
466 buffer_info->skb, next_desc);
467 } else {
468 pr_info("%s[0x%03X] %016llX %016llX %016llX %p%s\n",
469 "R ", i,
470 (unsigned long long)le64_to_cpu(u1->a),
471 (unsigned long long)le64_to_cpu(u1->b),
472 (unsigned long long)buffer_info->dma,
473 buffer_info->skb, next_desc);
474
475 if (netif_msg_pktdata(adapter) &&
476 buffer_info->skb)
477 print_hex_dump(KERN_INFO, "",
478 DUMP_PREFIX_ADDRESS, 16,
479 1,
480 buffer_info->skb->data,
481 adapter->rx_buffer_len,
482 true);
483 }
484 }
485 }
486}
487
488/**
489 * e1000_desc_unused - calculate if we have unused descriptors
490 **/
491static int e1000_desc_unused(struct e1000_ring *ring)
492{
493 if (ring->next_to_clean > ring->next_to_use)
494 return ring->next_to_clean - ring->next_to_use - 1;
495
496 return ring->count + ring->next_to_clean - ring->next_to_use - 1;
497}
498
499/**
500 * e1000e_systim_to_hwtstamp - convert system time value to hw time stamp
501 * @adapter: board private structure
502 * @hwtstamps: time stamp structure to update
503 * @systim: unsigned 64bit system time value.
504 *
505 * Convert the system time value stored in the RX/TXSTMP registers into a
506 * hwtstamp which can be used by the upper level time stamping functions.
507 *
508 * The 'systim_lock' spinlock is used to protect the consistency of the
509 * system time value. This is needed because reading the 64 bit time
510 * value involves reading two 32 bit registers. The first read latches the
511 * value.
512 **/
513static void e1000e_systim_to_hwtstamp(struct e1000_adapter *adapter,
514 struct skb_shared_hwtstamps *hwtstamps,
515 u64 systim)
516{
517 u64 ns;
518 unsigned long flags;
519
520 spin_lock_irqsave(&adapter->systim_lock, flags);
521 ns = timecounter_cyc2time(&adapter->tc, systim);
522 spin_unlock_irqrestore(&adapter->systim_lock, flags);
523
524 memset(hwtstamps, 0, sizeof(*hwtstamps));
525 hwtstamps->hwtstamp = ns_to_ktime(ns);
526}
527
528/**
529 * e1000e_rx_hwtstamp - utility function which checks for Rx time stamp
530 * @adapter: board private structure
531 * @status: descriptor extended error and status field
532 * @skb: particular skb to include time stamp
533 *
534 * If the time stamp is valid, convert it into the timecounter ns value
535 * and store that result into the shhwtstamps structure which is passed
536 * up the network stack.
537 **/
538static void e1000e_rx_hwtstamp(struct e1000_adapter *adapter, u32 status,
539 struct sk_buff *skb)
540{
541 struct e1000_hw *hw = &adapter->hw;
542 u64 rxstmp;
543
544 if (!(adapter->flags & FLAG_HAS_HW_TIMESTAMP) ||
545 !(status & E1000_RXDEXT_STATERR_TST) ||
546 !(er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_VALID))
547 return;
548
549 /* The Rx time stamp registers contain the time stamp. No other
550 * received packet will be time stamped until the Rx time stamp
551 * registers are read. Because only one packet can be time stamped
552 * at a time, the register values must belong to this packet and
553 * therefore none of the other additional attributes need to be
554 * compared.
555 */
556 rxstmp = (u64)er32(RXSTMPL);
557 rxstmp |= (u64)er32(RXSTMPH) << 32;
558 e1000e_systim_to_hwtstamp(adapter, skb_hwtstamps(skb), rxstmp);
559
560 adapter->flags2 &= ~FLAG2_CHECK_RX_HWTSTAMP;
561}
562
563/**
564 * e1000_receive_skb - helper function to handle Rx indications
565 * @adapter: board private structure
566 * @staterr: descriptor extended error and status field as written by hardware
567 * @vlan: descriptor vlan field as written by hardware (no le/be conversion)
568 * @skb: pointer to sk_buff to be indicated to stack
569 **/
570static void e1000_receive_skb(struct e1000_adapter *adapter,
571 struct net_device *netdev, struct sk_buff *skb,
572 u32 staterr, __le16 vlan)
573{
574 u16 tag = le16_to_cpu(vlan);
575
576 e1000e_rx_hwtstamp(adapter, staterr, skb);
577
578 skb->protocol = eth_type_trans(skb, netdev);
579
580 if (staterr & E1000_RXD_STAT_VP)
581 __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), tag);
582
583 napi_gro_receive(&adapter->napi, skb);
584}
585
586/**
587 * e1000_rx_checksum - Receive Checksum Offload
588 * @adapter: board private structure
589 * @status_err: receive descriptor status and error fields
590 * @csum: receive descriptor csum field
591 * @sk_buff: socket buffer with received data
592 **/
593static void e1000_rx_checksum(struct e1000_adapter *adapter, u32 status_err,
594 struct sk_buff *skb)
595{
596 u16 status = (u16)status_err;
597 u8 errors = (u8)(status_err >> 24);
598
599 skb_checksum_none_assert(skb);
600
601 /* Rx checksum disabled */
602 if (!(adapter->netdev->features & NETIF_F_RXCSUM))
603 return;
604
605 /* Ignore Checksum bit is set */
606 if (status & E1000_RXD_STAT_IXSM)
607 return;
608
609 /* TCP/UDP checksum error bit or IP checksum error bit is set */
610 if (errors & (E1000_RXD_ERR_TCPE | E1000_RXD_ERR_IPE)) {
611 /* let the stack verify checksum errors */
612 adapter->hw_csum_err++;
613 return;
614 }
615
616 /* TCP/UDP Checksum has not been calculated */
617 if (!(status & (E1000_RXD_STAT_TCPCS | E1000_RXD_STAT_UDPCS)))
618 return;
619
620 /* It must be a TCP or UDP packet with a valid checksum */
621 skb->ip_summed = CHECKSUM_UNNECESSARY;
622 adapter->hw_csum_good++;
623}
624
625static void e1000e_update_rdt_wa(struct e1000_ring *rx_ring, unsigned int i)
626{
627 struct e1000_adapter *adapter = rx_ring->adapter;
628 struct e1000_hw *hw = &adapter->hw;
629 s32 ret_val = __ew32_prepare(hw);
630
631 writel(i, rx_ring->tail);
632
633 if (unlikely(!ret_val && (i != readl(rx_ring->tail)))) {
634 u32 rctl = er32(RCTL);
635
636 ew32(RCTL, rctl & ~E1000_RCTL_EN);
637 e_err("ME firmware caused invalid RDT - resetting\n");
638 schedule_work(&adapter->reset_task);
639 }
640}
641
642static void e1000e_update_tdt_wa(struct e1000_ring *tx_ring, unsigned int i)
643{
644 struct e1000_adapter *adapter = tx_ring->adapter;
645 struct e1000_hw *hw = &adapter->hw;
646 s32 ret_val = __ew32_prepare(hw);
647
648 writel(i, tx_ring->tail);
649
650 if (unlikely(!ret_val && (i != readl(tx_ring->tail)))) {
651 u32 tctl = er32(TCTL);
652
653 ew32(TCTL, tctl & ~E1000_TCTL_EN);
654 e_err("ME firmware caused invalid TDT - resetting\n");
655 schedule_work(&adapter->reset_task);
656 }
657}
658
659/**
660 * e1000_alloc_rx_buffers - Replace used receive buffers
661 * @rx_ring: Rx descriptor ring
662 **/
663static void e1000_alloc_rx_buffers(struct e1000_ring *rx_ring,
664 int cleaned_count, gfp_t gfp)
665{
666 struct e1000_adapter *adapter = rx_ring->adapter;
667 struct net_device *netdev = adapter->netdev;
668 struct pci_dev *pdev = adapter->pdev;
669 union e1000_rx_desc_extended *rx_desc;
670 struct e1000_buffer *buffer_info;
671 struct sk_buff *skb;
672 unsigned int i;
673 unsigned int bufsz = adapter->rx_buffer_len;
674
675 i = rx_ring->next_to_use;
676 buffer_info = &rx_ring->buffer_info[i];
677
678 while (cleaned_count--) {
679 skb = buffer_info->skb;
680 if (skb) {
681 skb_trim(skb, 0);
682 goto map_skb;
683 }
684
685 skb = __netdev_alloc_skb_ip_align(netdev, bufsz, gfp);
686 if (!skb) {
687 /* Better luck next round */
688 adapter->alloc_rx_buff_failed++;
689 break;
690 }
691
692 buffer_info->skb = skb;
693map_skb:
694 buffer_info->dma = dma_map_single(&pdev->dev, skb->data,
695 adapter->rx_buffer_len,
696 DMA_FROM_DEVICE);
697 if (dma_mapping_error(&pdev->dev, buffer_info->dma)) {
698 dev_err(&pdev->dev, "Rx DMA map failed\n");
699 adapter->rx_dma_failed++;
700 break;
701 }
702
703 rx_desc = E1000_RX_DESC_EXT(*rx_ring, i);
704 rx_desc->read.buffer_addr = cpu_to_le64(buffer_info->dma);
705
706 if (unlikely(!(i & (E1000_RX_BUFFER_WRITE - 1)))) {
707 /* Force memory writes to complete before letting h/w
708 * know there are new descriptors to fetch. (Only
709 * applicable for weak-ordered memory model archs,
710 * such as IA-64).
711 */
712 wmb();
713 if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA)
714 e1000e_update_rdt_wa(rx_ring, i);
715 else
716 writel(i, rx_ring->tail);
717 }
718 i++;
719 if (i == rx_ring->count)
720 i = 0;
721 buffer_info = &rx_ring->buffer_info[i];
722 }
723
724 rx_ring->next_to_use = i;
725}
726
727/**
728 * e1000_alloc_rx_buffers_ps - Replace used receive buffers; packet split
729 * @rx_ring: Rx descriptor ring
730 **/
731static void e1000_alloc_rx_buffers_ps(struct e1000_ring *rx_ring,
732 int cleaned_count, gfp_t gfp)
733{
734 struct e1000_adapter *adapter = rx_ring->adapter;
735 struct net_device *netdev = adapter->netdev;
736 struct pci_dev *pdev = adapter->pdev;
737 union e1000_rx_desc_packet_split *rx_desc;
738 struct e1000_buffer *buffer_info;
739 struct e1000_ps_page *ps_page;
740 struct sk_buff *skb;
741 unsigned int i, j;
742
743 i = rx_ring->next_to_use;
744 buffer_info = &rx_ring->buffer_info[i];
745
746 while (cleaned_count--) {
747 rx_desc = E1000_RX_DESC_PS(*rx_ring, i);
748
749 for (j = 0; j < PS_PAGE_BUFFERS; j++) {
750 ps_page = &buffer_info->ps_pages[j];
751 if (j >= adapter->rx_ps_pages) {
752 /* all unused desc entries get hw null ptr */
753 rx_desc->read.buffer_addr[j + 1] =
754 ~cpu_to_le64(0);
755 continue;
756 }
757 if (!ps_page->page) {
758 ps_page->page = alloc_page(gfp);
759 if (!ps_page->page) {
760 adapter->alloc_rx_buff_failed++;
761 goto no_buffers;
762 }
763 ps_page->dma = dma_map_page(&pdev->dev,
764 ps_page->page,
765 0, PAGE_SIZE,
766 DMA_FROM_DEVICE);
767 if (dma_mapping_error(&pdev->dev,
768 ps_page->dma)) {
769 dev_err(&adapter->pdev->dev,
770 "Rx DMA page map failed\n");
771 adapter->rx_dma_failed++;
772 goto no_buffers;
773 }
774 }
775 /* Refresh the desc even if buffer_addrs
776 * didn't change because each write-back
777 * erases this info.
778 */
779 rx_desc->read.buffer_addr[j + 1] =
780 cpu_to_le64(ps_page->dma);
781 }
782
783 skb = __netdev_alloc_skb_ip_align(netdev, adapter->rx_ps_bsize0,
784 gfp);
785
786 if (!skb) {
787 adapter->alloc_rx_buff_failed++;
788 break;
789 }
790
791 buffer_info->skb = skb;
792 buffer_info->dma = dma_map_single(&pdev->dev, skb->data,
793 adapter->rx_ps_bsize0,
794 DMA_FROM_DEVICE);
795 if (dma_mapping_error(&pdev->dev, buffer_info->dma)) {
796 dev_err(&pdev->dev, "Rx DMA map failed\n");
797 adapter->rx_dma_failed++;
798 /* cleanup skb */
799 dev_kfree_skb_any(skb);
800 buffer_info->skb = NULL;
801 break;
802 }
803
804 rx_desc->read.buffer_addr[0] = cpu_to_le64(buffer_info->dma);
805
806 if (unlikely(!(i & (E1000_RX_BUFFER_WRITE - 1)))) {
807 /* Force memory writes to complete before letting h/w
808 * know there are new descriptors to fetch. (Only
809 * applicable for weak-ordered memory model archs,
810 * such as IA-64).
811 */
812 wmb();
813 if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA)
814 e1000e_update_rdt_wa(rx_ring, i << 1);
815 else
816 writel(i << 1, rx_ring->tail);
817 }
818
819 i++;
820 if (i == rx_ring->count)
821 i = 0;
822 buffer_info = &rx_ring->buffer_info[i];
823 }
824
825no_buffers:
826 rx_ring->next_to_use = i;
827}
828
829/**
830 * e1000_alloc_jumbo_rx_buffers - Replace used jumbo receive buffers
831 * @rx_ring: Rx descriptor ring
832 * @cleaned_count: number of buffers to allocate this pass
833 **/
834
835static void e1000_alloc_jumbo_rx_buffers(struct e1000_ring *rx_ring,
836 int cleaned_count, gfp_t gfp)
837{
838 struct e1000_adapter *adapter = rx_ring->adapter;
839 struct net_device *netdev = adapter->netdev;
840 struct pci_dev *pdev = adapter->pdev;
841 union e1000_rx_desc_extended *rx_desc;
842 struct e1000_buffer *buffer_info;
843 struct sk_buff *skb;
844 unsigned int i;
845 unsigned int bufsz = 256 - 16; /* for skb_reserve */
846
847 i = rx_ring->next_to_use;
848 buffer_info = &rx_ring->buffer_info[i];
849
850 while (cleaned_count--) {
851 skb = buffer_info->skb;
852 if (skb) {
853 skb_trim(skb, 0);
854 goto check_page;
855 }
856
857 skb = __netdev_alloc_skb_ip_align(netdev, bufsz, gfp);
858 if (unlikely(!skb)) {
859 /* Better luck next round */
860 adapter->alloc_rx_buff_failed++;
861 break;
862 }
863
864 buffer_info->skb = skb;
865check_page:
866 /* allocate a new page if necessary */
867 if (!buffer_info->page) {
868 buffer_info->page = alloc_page(gfp);
869 if (unlikely(!buffer_info->page)) {
870 adapter->alloc_rx_buff_failed++;
871 break;
872 }
873 }
874
875 if (!buffer_info->dma) {
876 buffer_info->dma = dma_map_page(&pdev->dev,
877 buffer_info->page, 0,
878 PAGE_SIZE,
879 DMA_FROM_DEVICE);
880 if (dma_mapping_error(&pdev->dev, buffer_info->dma)) {
881 adapter->alloc_rx_buff_failed++;
882 break;
883 }
884 }
885
886 rx_desc = E1000_RX_DESC_EXT(*rx_ring, i);
887 rx_desc->read.buffer_addr = cpu_to_le64(buffer_info->dma);
888
889 if (unlikely(++i == rx_ring->count))
890 i = 0;
891 buffer_info = &rx_ring->buffer_info[i];
892 }
893
894 if (likely(rx_ring->next_to_use != i)) {
895 rx_ring->next_to_use = i;
896 if (unlikely(i-- == 0))
897 i = (rx_ring->count - 1);
898
899 /* Force memory writes to complete before letting h/w
900 * know there are new descriptors to fetch. (Only
901 * applicable for weak-ordered memory model archs,
902 * such as IA-64).
903 */
904 wmb();
905 if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA)
906 e1000e_update_rdt_wa(rx_ring, i);
907 else
908 writel(i, rx_ring->tail);
909 }
910}
911
912static inline void e1000_rx_hash(struct net_device *netdev, __le32 rss,
913 struct sk_buff *skb)
914{
915 if (netdev->features & NETIF_F_RXHASH)
916 skb_set_hash(skb, le32_to_cpu(rss), PKT_HASH_TYPE_L3);
917}
918
919/**
920 * e1000_clean_rx_irq - Send received data up the network stack
921 * @rx_ring: Rx descriptor ring
922 *
923 * the return value indicates whether actual cleaning was done, there
924 * is no guarantee that everything was cleaned
925 **/
926static bool e1000_clean_rx_irq(struct e1000_ring *rx_ring, int *work_done,
927 int work_to_do)
928{
929 struct e1000_adapter *adapter = rx_ring->adapter;
930 struct net_device *netdev = adapter->netdev;
931 struct pci_dev *pdev = adapter->pdev;
932 struct e1000_hw *hw = &adapter->hw;
933 union e1000_rx_desc_extended *rx_desc, *next_rxd;
934 struct e1000_buffer *buffer_info, *next_buffer;
935 u32 length, staterr;
936 unsigned int i;
937 int cleaned_count = 0;
938 bool cleaned = false;
939 unsigned int total_rx_bytes = 0, total_rx_packets = 0;
940
941 i = rx_ring->next_to_clean;
942 rx_desc = E1000_RX_DESC_EXT(*rx_ring, i);
943 staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
944 buffer_info = &rx_ring->buffer_info[i];
945
946 while (staterr & E1000_RXD_STAT_DD) {
947 struct sk_buff *skb;
948
949 if (*work_done >= work_to_do)
950 break;
951 (*work_done)++;
952 dma_rmb(); /* read descriptor and rx_buffer_info after status DD */
953
954 skb = buffer_info->skb;
955 buffer_info->skb = NULL;
956
957 prefetch(skb->data - NET_IP_ALIGN);
958
959 i++;
960 if (i == rx_ring->count)
961 i = 0;
962 next_rxd = E1000_RX_DESC_EXT(*rx_ring, i);
963 prefetch(next_rxd);
964
965 next_buffer = &rx_ring->buffer_info[i];
966
967 cleaned = true;
968 cleaned_count++;
969 dma_unmap_single(&pdev->dev, buffer_info->dma,
970 adapter->rx_buffer_len, DMA_FROM_DEVICE);
971 buffer_info->dma = 0;
972
973 length = le16_to_cpu(rx_desc->wb.upper.length);
974
975 /* !EOP means multiple descriptors were used to store a single
976 * packet, if that's the case we need to toss it. In fact, we
977 * need to toss every packet with the EOP bit clear and the
978 * next frame that _does_ have the EOP bit set, as it is by
979 * definition only a frame fragment
980 */
981 if (unlikely(!(staterr & E1000_RXD_STAT_EOP)))
982 adapter->flags2 |= FLAG2_IS_DISCARDING;
983
984 if (adapter->flags2 & FLAG2_IS_DISCARDING) {
985 /* All receives must fit into a single buffer */
986 e_dbg("Receive packet consumed multiple buffers\n");
987 /* recycle */
988 buffer_info->skb = skb;
989 if (staterr & E1000_RXD_STAT_EOP)
990 adapter->flags2 &= ~FLAG2_IS_DISCARDING;
991 goto next_desc;
992 }
993
994 if (unlikely((staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK) &&
995 !(netdev->features & NETIF_F_RXALL))) {
996 /* recycle */
997 buffer_info->skb = skb;
998 goto next_desc;
999 }
1000
1001 /* adjust length to remove Ethernet CRC */
1002 if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) {
1003 /* If configured to store CRC, don't subtract FCS,
1004 * but keep the FCS bytes out of the total_rx_bytes
1005 * counter
1006 */
1007 if (netdev->features & NETIF_F_RXFCS)
1008 total_rx_bytes -= 4;
1009 else
1010 length -= 4;
1011 }
1012
1013 total_rx_bytes += length;
1014 total_rx_packets++;
1015
1016 /* code added for copybreak, this should improve
1017 * performance for small packets with large amounts
1018 * of reassembly being done in the stack
1019 */
1020 if (length < copybreak) {
1021 struct sk_buff *new_skb =
1022 napi_alloc_skb(&adapter->napi, length);
1023 if (new_skb) {
1024 skb_copy_to_linear_data_offset(new_skb,
1025 -NET_IP_ALIGN,
1026 (skb->data -
1027 NET_IP_ALIGN),
1028 (length +
1029 NET_IP_ALIGN));
1030 /* save the skb in buffer_info as good */
1031 buffer_info->skb = skb;
1032 skb = new_skb;
1033 }
1034 /* else just continue with the old one */
1035 }
1036 /* end copybreak code */
1037 skb_put(skb, length);
1038
1039 /* Receive Checksum Offload */
1040 e1000_rx_checksum(adapter, staterr, skb);
1041
1042 e1000_rx_hash(netdev, rx_desc->wb.lower.hi_dword.rss, skb);
1043
1044 e1000_receive_skb(adapter, netdev, skb, staterr,
1045 rx_desc->wb.upper.vlan);
1046
1047next_desc:
1048 rx_desc->wb.upper.status_error &= cpu_to_le32(~0xFF);
1049
1050 /* return some buffers to hardware, one at a time is too slow */
1051 if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
1052 adapter->alloc_rx_buf(rx_ring, cleaned_count,
1053 GFP_ATOMIC);
1054 cleaned_count = 0;
1055 }
1056
1057 /* use prefetched values */
1058 rx_desc = next_rxd;
1059 buffer_info = next_buffer;
1060
1061 staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
1062 }
1063 rx_ring->next_to_clean = i;
1064
1065 cleaned_count = e1000_desc_unused(rx_ring);
1066 if (cleaned_count)
1067 adapter->alloc_rx_buf(rx_ring, cleaned_count, GFP_ATOMIC);
1068
1069 adapter->total_rx_bytes += total_rx_bytes;
1070 adapter->total_rx_packets += total_rx_packets;
1071 return cleaned;
1072}
1073
1074static void e1000_put_txbuf(struct e1000_ring *tx_ring,
1075 struct e1000_buffer *buffer_info,
1076 bool drop)
1077{
1078 struct e1000_adapter *adapter = tx_ring->adapter;
1079
1080 if (buffer_info->dma) {
1081 if (buffer_info->mapped_as_page)
1082 dma_unmap_page(&adapter->pdev->dev, buffer_info->dma,
1083 buffer_info->length, DMA_TO_DEVICE);
1084 else
1085 dma_unmap_single(&adapter->pdev->dev, buffer_info->dma,
1086 buffer_info->length, DMA_TO_DEVICE);
1087 buffer_info->dma = 0;
1088 }
1089 if (buffer_info->skb) {
1090 if (drop)
1091 dev_kfree_skb_any(buffer_info->skb);
1092 else
1093 dev_consume_skb_any(buffer_info->skb);
1094 buffer_info->skb = NULL;
1095 }
1096 buffer_info->time_stamp = 0;
1097}
1098
1099static void e1000_print_hw_hang(struct work_struct *work)
1100{
1101 struct e1000_adapter *adapter = container_of(work,
1102 struct e1000_adapter,
1103 print_hang_task);
1104 struct net_device *netdev = adapter->netdev;
1105 struct e1000_ring *tx_ring = adapter->tx_ring;
1106 unsigned int i = tx_ring->next_to_clean;
1107 unsigned int eop = tx_ring->buffer_info[i].next_to_watch;
1108 struct e1000_tx_desc *eop_desc = E1000_TX_DESC(*tx_ring, eop);
1109 struct e1000_hw *hw = &adapter->hw;
1110 u16 phy_status, phy_1000t_status, phy_ext_status;
1111 u16 pci_status;
1112
1113 if (test_bit(__E1000_DOWN, &adapter->state))
1114 return;
1115
1116 if (!adapter->tx_hang_recheck && (adapter->flags2 & FLAG2_DMA_BURST)) {
1117 /* May be block on write-back, flush and detect again
1118 * flush pending descriptor writebacks to memory
1119 */
1120 ew32(TIDV, adapter->tx_int_delay | E1000_TIDV_FPD);
1121 /* execute the writes immediately */
1122 e1e_flush();
1123 /* Due to rare timing issues, write to TIDV again to ensure
1124 * the write is successful
1125 */
1126 ew32(TIDV, adapter->tx_int_delay | E1000_TIDV_FPD);
1127 /* execute the writes immediately */
1128 e1e_flush();
1129 adapter->tx_hang_recheck = true;
1130 return;
1131 }
1132 adapter->tx_hang_recheck = false;
1133
1134 if (er32(TDH(0)) == er32(TDT(0))) {
1135 e_dbg("false hang detected, ignoring\n");
1136 return;
1137 }
1138
1139 /* Real hang detected */
1140 netif_stop_queue(netdev);
1141
1142 e1e_rphy(hw, MII_BMSR, &phy_status);
1143 e1e_rphy(hw, MII_STAT1000, &phy_1000t_status);
1144 e1e_rphy(hw, MII_ESTATUS, &phy_ext_status);
1145
1146 pci_read_config_word(adapter->pdev, PCI_STATUS, &pci_status);
1147
1148 /* detected Hardware unit hang */
1149 e_err("Detected Hardware Unit Hang:\n"
1150 " TDH <%x>\n"
1151 " TDT <%x>\n"
1152 " next_to_use <%x>\n"
1153 " next_to_clean <%x>\n"
1154 "buffer_info[next_to_clean]:\n"
1155 " time_stamp <%lx>\n"
1156 " next_to_watch <%x>\n"
1157 " jiffies <%lx>\n"
1158 " next_to_watch.status <%x>\n"
1159 "MAC Status <%x>\n"
1160 "PHY Status <%x>\n"
1161 "PHY 1000BASE-T Status <%x>\n"
1162 "PHY Extended Status <%x>\n"
1163 "PCI Status <%x>\n",
1164 readl(tx_ring->head), readl(tx_ring->tail), tx_ring->next_to_use,
1165 tx_ring->next_to_clean, tx_ring->buffer_info[eop].time_stamp,
1166 eop, jiffies, eop_desc->upper.fields.status, er32(STATUS),
1167 phy_status, phy_1000t_status, phy_ext_status, pci_status);
1168
1169 e1000e_dump(adapter);
1170
1171 /* Suggest workaround for known h/w issue */
1172 if ((hw->mac.type == e1000_pchlan) && (er32(CTRL) & E1000_CTRL_TFCE))
1173 e_err("Try turning off Tx pause (flow control) via ethtool\n");
1174}
1175
1176/**
1177 * e1000e_tx_hwtstamp_work - check for Tx time stamp
1178 * @work: pointer to work struct
1179 *
1180 * This work function polls the TSYNCTXCTL valid bit to determine when a
1181 * timestamp has been taken for the current stored skb. The timestamp must
1182 * be for this skb because only one such packet is allowed in the queue.
1183 */
1184static void e1000e_tx_hwtstamp_work(struct work_struct *work)
1185{
1186 struct e1000_adapter *adapter = container_of(work, struct e1000_adapter,
1187 tx_hwtstamp_work);
1188 struct e1000_hw *hw = &adapter->hw;
1189
1190 if (er32(TSYNCTXCTL) & E1000_TSYNCTXCTL_VALID) {
1191 struct sk_buff *skb = adapter->tx_hwtstamp_skb;
1192 struct skb_shared_hwtstamps shhwtstamps;
1193 u64 txstmp;
1194
1195 txstmp = er32(TXSTMPL);
1196 txstmp |= (u64)er32(TXSTMPH) << 32;
1197
1198 e1000e_systim_to_hwtstamp(adapter, &shhwtstamps, txstmp);
1199
1200 /* Clear the global tx_hwtstamp_skb pointer and force writes
1201 * prior to notifying the stack of a Tx timestamp.
1202 */
1203 adapter->tx_hwtstamp_skb = NULL;
1204 wmb(); /* force write prior to skb_tstamp_tx */
1205
1206 skb_tstamp_tx(skb, &shhwtstamps);
1207 dev_consume_skb_any(skb);
1208 } else if (time_after(jiffies, adapter->tx_hwtstamp_start
1209 + adapter->tx_timeout_factor * HZ)) {
1210 dev_kfree_skb_any(adapter->tx_hwtstamp_skb);
1211 adapter->tx_hwtstamp_skb = NULL;
1212 adapter->tx_hwtstamp_timeouts++;
1213 e_warn("clearing Tx timestamp hang\n");
1214 } else {
1215 /* reschedule to check later */
1216 schedule_work(&adapter->tx_hwtstamp_work);
1217 }
1218}
1219
1220/**
1221 * e1000_clean_tx_irq - Reclaim resources after transmit completes
1222 * @tx_ring: Tx descriptor ring
1223 *
1224 * the return value indicates whether actual cleaning was done, there
1225 * is no guarantee that everything was cleaned
1226 **/
1227static bool e1000_clean_tx_irq(struct e1000_ring *tx_ring)
1228{
1229 struct e1000_adapter *adapter = tx_ring->adapter;
1230 struct net_device *netdev = adapter->netdev;
1231 struct e1000_hw *hw = &adapter->hw;
1232 struct e1000_tx_desc *tx_desc, *eop_desc;
1233 struct e1000_buffer *buffer_info;
1234 unsigned int i, eop;
1235 unsigned int count = 0;
1236 unsigned int total_tx_bytes = 0, total_tx_packets = 0;
1237 unsigned int bytes_compl = 0, pkts_compl = 0;
1238
1239 i = tx_ring->next_to_clean;
1240 eop = tx_ring->buffer_info[i].next_to_watch;
1241 eop_desc = E1000_TX_DESC(*tx_ring, eop);
1242
1243 while ((eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) &&
1244 (count < tx_ring->count)) {
1245 bool cleaned = false;
1246
1247 dma_rmb(); /* read buffer_info after eop_desc */
1248 for (; !cleaned; count++) {
1249 tx_desc = E1000_TX_DESC(*tx_ring, i);
1250 buffer_info = &tx_ring->buffer_info[i];
1251 cleaned = (i == eop);
1252
1253 if (cleaned) {
1254 total_tx_packets += buffer_info->segs;
1255 total_tx_bytes += buffer_info->bytecount;
1256 if (buffer_info->skb) {
1257 bytes_compl += buffer_info->skb->len;
1258 pkts_compl++;
1259 }
1260 }
1261
1262 e1000_put_txbuf(tx_ring, buffer_info, false);
1263 tx_desc->upper.data = 0;
1264
1265 i++;
1266 if (i == tx_ring->count)
1267 i = 0;
1268 }
1269
1270 if (i == tx_ring->next_to_use)
1271 break;
1272 eop = tx_ring->buffer_info[i].next_to_watch;
1273 eop_desc = E1000_TX_DESC(*tx_ring, eop);
1274 }
1275
1276 tx_ring->next_to_clean = i;
1277
1278 netdev_completed_queue(netdev, pkts_compl, bytes_compl);
1279
1280#define TX_WAKE_THRESHOLD 32
1281 if (count && netif_carrier_ok(netdev) &&
1282 e1000_desc_unused(tx_ring) >= TX_WAKE_THRESHOLD) {
1283 /* Make sure that anybody stopping the queue after this
1284 * sees the new next_to_clean.
1285 */
1286 smp_mb();
1287
1288 if (netif_queue_stopped(netdev) &&
1289 !(test_bit(__E1000_DOWN, &adapter->state))) {
1290 netif_wake_queue(netdev);
1291 ++adapter->restart_queue;
1292 }
1293 }
1294
1295 if (adapter->detect_tx_hung) {
1296 /* Detect a transmit hang in hardware, this serializes the
1297 * check with the clearing of time_stamp and movement of i
1298 */
1299 adapter->detect_tx_hung = false;
1300 if (tx_ring->buffer_info[i].time_stamp &&
1301 time_after(jiffies, tx_ring->buffer_info[i].time_stamp
1302 + (adapter->tx_timeout_factor * HZ)) &&
1303 !(er32(STATUS) & E1000_STATUS_TXOFF))
1304 schedule_work(&adapter->print_hang_task);
1305 else
1306 adapter->tx_hang_recheck = false;
1307 }
1308 adapter->total_tx_bytes += total_tx_bytes;
1309 adapter->total_tx_packets += total_tx_packets;
1310 return count < tx_ring->count;
1311}
1312
1313/**
1314 * e1000_clean_rx_irq_ps - Send received data up the network stack; packet split
1315 * @rx_ring: Rx descriptor ring
1316 *
1317 * the return value indicates whether actual cleaning was done, there
1318 * is no guarantee that everything was cleaned
1319 **/
1320static bool e1000_clean_rx_irq_ps(struct e1000_ring *rx_ring, int *work_done,
1321 int work_to_do)
1322{
1323 struct e1000_adapter *adapter = rx_ring->adapter;
1324 struct e1000_hw *hw = &adapter->hw;
1325 union e1000_rx_desc_packet_split *rx_desc, *next_rxd;
1326 struct net_device *netdev = adapter->netdev;
1327 struct pci_dev *pdev = adapter->pdev;
1328 struct e1000_buffer *buffer_info, *next_buffer;
1329 struct e1000_ps_page *ps_page;
1330 struct sk_buff *skb;
1331 unsigned int i, j;
1332 u32 length, staterr;
1333 int cleaned_count = 0;
1334 bool cleaned = false;
1335 unsigned int total_rx_bytes = 0, total_rx_packets = 0;
1336
1337 i = rx_ring->next_to_clean;
1338 rx_desc = E1000_RX_DESC_PS(*rx_ring, i);
1339 staterr = le32_to_cpu(rx_desc->wb.middle.status_error);
1340 buffer_info = &rx_ring->buffer_info[i];
1341
1342 while (staterr & E1000_RXD_STAT_DD) {
1343 if (*work_done >= work_to_do)
1344 break;
1345 (*work_done)++;
1346 skb = buffer_info->skb;
1347 dma_rmb(); /* read descriptor and rx_buffer_info after status DD */
1348
1349 /* in the packet split case this is header only */
1350 prefetch(skb->data - NET_IP_ALIGN);
1351
1352 i++;
1353 if (i == rx_ring->count)
1354 i = 0;
1355 next_rxd = E1000_RX_DESC_PS(*rx_ring, i);
1356 prefetch(next_rxd);
1357
1358 next_buffer = &rx_ring->buffer_info[i];
1359
1360 cleaned = true;
1361 cleaned_count++;
1362 dma_unmap_single(&pdev->dev, buffer_info->dma,
1363 adapter->rx_ps_bsize0, DMA_FROM_DEVICE);
1364 buffer_info->dma = 0;
1365
1366 /* see !EOP comment in other Rx routine */
1367 if (!(staterr & E1000_RXD_STAT_EOP))
1368 adapter->flags2 |= FLAG2_IS_DISCARDING;
1369
1370 if (adapter->flags2 & FLAG2_IS_DISCARDING) {
1371 e_dbg("Packet Split buffers didn't pick up the full packet\n");
1372 dev_kfree_skb_irq(skb);
1373 if (staterr & E1000_RXD_STAT_EOP)
1374 adapter->flags2 &= ~FLAG2_IS_DISCARDING;
1375 goto next_desc;
1376 }
1377
1378 if (unlikely((staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK) &&
1379 !(netdev->features & NETIF_F_RXALL))) {
1380 dev_kfree_skb_irq(skb);
1381 goto next_desc;
1382 }
1383
1384 length = le16_to_cpu(rx_desc->wb.middle.length0);
1385
1386 if (!length) {
1387 e_dbg("Last part of the packet spanning multiple descriptors\n");
1388 dev_kfree_skb_irq(skb);
1389 goto next_desc;
1390 }
1391
1392 /* Good Receive */
1393 skb_put(skb, length);
1394
1395 {
1396 /* this looks ugly, but it seems compiler issues make
1397 * it more efficient than reusing j
1398 */
1399 int l1 = le16_to_cpu(rx_desc->wb.upper.length[0]);
1400
1401 /* page alloc/put takes too long and effects small
1402 * packet throughput, so unsplit small packets and
1403 * save the alloc/put only valid in softirq (napi)
1404 * context to call kmap_*
1405 */
1406 if (l1 && (l1 <= copybreak) &&
1407 ((length + l1) <= adapter->rx_ps_bsize0)) {
1408 u8 *vaddr;
1409
1410 ps_page = &buffer_info->ps_pages[0];
1411
1412 /* there is no documentation about how to call
1413 * kmap_atomic, so we can't hold the mapping
1414 * very long
1415 */
1416 dma_sync_single_for_cpu(&pdev->dev,
1417 ps_page->dma,
1418 PAGE_SIZE,
1419 DMA_FROM_DEVICE);
1420 vaddr = kmap_atomic(ps_page->page);
1421 memcpy(skb_tail_pointer(skb), vaddr, l1);
1422 kunmap_atomic(vaddr);
1423 dma_sync_single_for_device(&pdev->dev,
1424 ps_page->dma,
1425 PAGE_SIZE,
1426 DMA_FROM_DEVICE);
1427
1428 /* remove the CRC */
1429 if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) {
1430 if (!(netdev->features & NETIF_F_RXFCS))
1431 l1 -= 4;
1432 }
1433
1434 skb_put(skb, l1);
1435 goto copydone;
1436 } /* if */
1437 }
1438
1439 for (j = 0; j < PS_PAGE_BUFFERS; j++) {
1440 length = le16_to_cpu(rx_desc->wb.upper.length[j]);
1441 if (!length)
1442 break;
1443
1444 ps_page = &buffer_info->ps_pages[j];
1445 dma_unmap_page(&pdev->dev, ps_page->dma, PAGE_SIZE,
1446 DMA_FROM_DEVICE);
1447 ps_page->dma = 0;
1448 skb_fill_page_desc(skb, j, ps_page->page, 0, length);
1449 ps_page->page = NULL;
1450 skb->len += length;
1451 skb->data_len += length;
1452 skb->truesize += PAGE_SIZE;
1453 }
1454
1455 /* strip the ethernet crc, problem is we're using pages now so
1456 * this whole operation can get a little cpu intensive
1457 */
1458 if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) {
1459 if (!(netdev->features & NETIF_F_RXFCS))
1460 pskb_trim(skb, skb->len - 4);
1461 }
1462
1463copydone:
1464 total_rx_bytes += skb->len;
1465 total_rx_packets++;
1466
1467 e1000_rx_checksum(adapter, staterr, skb);
1468
1469 e1000_rx_hash(netdev, rx_desc->wb.lower.hi_dword.rss, skb);
1470
1471 if (rx_desc->wb.upper.header_status &
1472 cpu_to_le16(E1000_RXDPS_HDRSTAT_HDRSP))
1473 adapter->rx_hdr_split++;
1474
1475 e1000_receive_skb(adapter, netdev, skb, staterr,
1476 rx_desc->wb.middle.vlan);
1477
1478next_desc:
1479 rx_desc->wb.middle.status_error &= cpu_to_le32(~0xFF);
1480 buffer_info->skb = NULL;
1481
1482 /* return some buffers to hardware, one at a time is too slow */
1483 if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
1484 adapter->alloc_rx_buf(rx_ring, cleaned_count,
1485 GFP_ATOMIC);
1486 cleaned_count = 0;
1487 }
1488
1489 /* use prefetched values */
1490 rx_desc = next_rxd;
1491 buffer_info = next_buffer;
1492
1493 staterr = le32_to_cpu(rx_desc->wb.middle.status_error);
1494 }
1495 rx_ring->next_to_clean = i;
1496
1497 cleaned_count = e1000_desc_unused(rx_ring);
1498 if (cleaned_count)
1499 adapter->alloc_rx_buf(rx_ring, cleaned_count, GFP_ATOMIC);
1500
1501 adapter->total_rx_bytes += total_rx_bytes;
1502 adapter->total_rx_packets += total_rx_packets;
1503 return cleaned;
1504}
1505
1506/**
1507 * e1000_consume_page - helper function
1508 **/
1509static void e1000_consume_page(struct e1000_buffer *bi, struct sk_buff *skb,
1510 u16 length)
1511{
1512 bi->page = NULL;
1513 skb->len += length;
1514 skb->data_len += length;
1515 skb->truesize += PAGE_SIZE;
1516}
1517
1518/**
1519 * e1000_clean_jumbo_rx_irq - Send received data up the network stack; legacy
1520 * @adapter: board private structure
1521 *
1522 * the return value indicates whether actual cleaning was done, there
1523 * is no guarantee that everything was cleaned
1524 **/
1525static bool e1000_clean_jumbo_rx_irq(struct e1000_ring *rx_ring, int *work_done,
1526 int work_to_do)
1527{
1528 struct e1000_adapter *adapter = rx_ring->adapter;
1529 struct net_device *netdev = adapter->netdev;
1530 struct pci_dev *pdev = adapter->pdev;
1531 union e1000_rx_desc_extended *rx_desc, *next_rxd;
1532 struct e1000_buffer *buffer_info, *next_buffer;
1533 u32 length, staterr;
1534 unsigned int i;
1535 int cleaned_count = 0;
1536 bool cleaned = false;
1537 unsigned int total_rx_bytes = 0, total_rx_packets = 0;
1538 struct skb_shared_info *shinfo;
1539
1540 i = rx_ring->next_to_clean;
1541 rx_desc = E1000_RX_DESC_EXT(*rx_ring, i);
1542 staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
1543 buffer_info = &rx_ring->buffer_info[i];
1544
1545 while (staterr & E1000_RXD_STAT_DD) {
1546 struct sk_buff *skb;
1547
1548 if (*work_done >= work_to_do)
1549 break;
1550 (*work_done)++;
1551 dma_rmb(); /* read descriptor and rx_buffer_info after status DD */
1552
1553 skb = buffer_info->skb;
1554 buffer_info->skb = NULL;
1555
1556 ++i;
1557 if (i == rx_ring->count)
1558 i = 0;
1559 next_rxd = E1000_RX_DESC_EXT(*rx_ring, i);
1560 prefetch(next_rxd);
1561
1562 next_buffer = &rx_ring->buffer_info[i];
1563
1564 cleaned = true;
1565 cleaned_count++;
1566 dma_unmap_page(&pdev->dev, buffer_info->dma, PAGE_SIZE,
1567 DMA_FROM_DEVICE);
1568 buffer_info->dma = 0;
1569
1570 length = le16_to_cpu(rx_desc->wb.upper.length);
1571
1572 /* errors is only valid for DD + EOP descriptors */
1573 if (unlikely((staterr & E1000_RXD_STAT_EOP) &&
1574 ((staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK) &&
1575 !(netdev->features & NETIF_F_RXALL)))) {
1576 /* recycle both page and skb */
1577 buffer_info->skb = skb;
1578 /* an error means any chain goes out the window too */
1579 if (rx_ring->rx_skb_top)
1580 dev_kfree_skb_irq(rx_ring->rx_skb_top);
1581 rx_ring->rx_skb_top = NULL;
1582 goto next_desc;
1583 }
1584#define rxtop (rx_ring->rx_skb_top)
1585 if (!(staterr & E1000_RXD_STAT_EOP)) {
1586 /* this descriptor is only the beginning (or middle) */
1587 if (!rxtop) {
1588 /* this is the beginning of a chain */
1589 rxtop = skb;
1590 skb_fill_page_desc(rxtop, 0, buffer_info->page,
1591 0, length);
1592 } else {
1593 /* this is the middle of a chain */
1594 shinfo = skb_shinfo(rxtop);
1595 skb_fill_page_desc(rxtop, shinfo->nr_frags,
1596 buffer_info->page, 0,
1597 length);
1598 /* re-use the skb, only consumed the page */
1599 buffer_info->skb = skb;
1600 }
1601 e1000_consume_page(buffer_info, rxtop, length);
1602 goto next_desc;
1603 } else {
1604 if (rxtop) {
1605 /* end of the chain */
1606 shinfo = skb_shinfo(rxtop);
1607 skb_fill_page_desc(rxtop, shinfo->nr_frags,
1608 buffer_info->page, 0,
1609 length);
1610 /* re-use the current skb, we only consumed the
1611 * page
1612 */
1613 buffer_info->skb = skb;
1614 skb = rxtop;
1615 rxtop = NULL;
1616 e1000_consume_page(buffer_info, skb, length);
1617 } else {
1618 /* no chain, got EOP, this buf is the packet
1619 * copybreak to save the put_page/alloc_page
1620 */
1621 if (length <= copybreak &&
1622 skb_tailroom(skb) >= length) {
1623 u8 *vaddr;
1624 vaddr = kmap_atomic(buffer_info->page);
1625 memcpy(skb_tail_pointer(skb), vaddr,
1626 length);
1627 kunmap_atomic(vaddr);
1628 /* re-use the page, so don't erase
1629 * buffer_info->page
1630 */
1631 skb_put(skb, length);
1632 } else {
1633 skb_fill_page_desc(skb, 0,
1634 buffer_info->page, 0,
1635 length);
1636 e1000_consume_page(buffer_info, skb,
1637 length);
1638 }
1639 }
1640 }
1641
1642 /* Receive Checksum Offload */
1643 e1000_rx_checksum(adapter, staterr, skb);
1644
1645 e1000_rx_hash(netdev, rx_desc->wb.lower.hi_dword.rss, skb);
1646
1647 /* probably a little skewed due to removing CRC */
1648 total_rx_bytes += skb->len;
1649 total_rx_packets++;
1650
1651 /* eth type trans needs skb->data to point to something */
1652 if (!pskb_may_pull(skb, ETH_HLEN)) {
1653 e_err("pskb_may_pull failed.\n");
1654 dev_kfree_skb_irq(skb);
1655 goto next_desc;
1656 }
1657
1658 e1000_receive_skb(adapter, netdev, skb, staterr,
1659 rx_desc->wb.upper.vlan);
1660
1661next_desc:
1662 rx_desc->wb.upper.status_error &= cpu_to_le32(~0xFF);
1663
1664 /* return some buffers to hardware, one at a time is too slow */
1665 if (unlikely(cleaned_count >= E1000_RX_BUFFER_WRITE)) {
1666 adapter->alloc_rx_buf(rx_ring, cleaned_count,
1667 GFP_ATOMIC);
1668 cleaned_count = 0;
1669 }
1670
1671 /* use prefetched values */
1672 rx_desc = next_rxd;
1673 buffer_info = next_buffer;
1674
1675 staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
1676 }
1677 rx_ring->next_to_clean = i;
1678
1679 cleaned_count = e1000_desc_unused(rx_ring);
1680 if (cleaned_count)
1681 adapter->alloc_rx_buf(rx_ring, cleaned_count, GFP_ATOMIC);
1682
1683 adapter->total_rx_bytes += total_rx_bytes;
1684 adapter->total_rx_packets += total_rx_packets;
1685 return cleaned;
1686}
1687
1688/**
1689 * e1000_clean_rx_ring - Free Rx Buffers per Queue
1690 * @rx_ring: Rx descriptor ring
1691 **/
1692static void e1000_clean_rx_ring(struct e1000_ring *rx_ring)
1693{
1694 struct e1000_adapter *adapter = rx_ring->adapter;
1695 struct e1000_buffer *buffer_info;
1696 struct e1000_ps_page *ps_page;
1697 struct pci_dev *pdev = adapter->pdev;
1698 unsigned int i, j;
1699
1700 /* Free all the Rx ring sk_buffs */
1701 for (i = 0; i < rx_ring->count; i++) {
1702 buffer_info = &rx_ring->buffer_info[i];
1703 if (buffer_info->dma) {
1704 if (adapter->clean_rx == e1000_clean_rx_irq)
1705 dma_unmap_single(&pdev->dev, buffer_info->dma,
1706 adapter->rx_buffer_len,
1707 DMA_FROM_DEVICE);
1708 else if (adapter->clean_rx == e1000_clean_jumbo_rx_irq)
1709 dma_unmap_page(&pdev->dev, buffer_info->dma,
1710 PAGE_SIZE, DMA_FROM_DEVICE);
1711 else if (adapter->clean_rx == e1000_clean_rx_irq_ps)
1712 dma_unmap_single(&pdev->dev, buffer_info->dma,
1713 adapter->rx_ps_bsize0,
1714 DMA_FROM_DEVICE);
1715 buffer_info->dma = 0;
1716 }
1717
1718 if (buffer_info->page) {
1719 put_page(buffer_info->page);
1720 buffer_info->page = NULL;
1721 }
1722
1723 if (buffer_info->skb) {
1724 dev_kfree_skb(buffer_info->skb);
1725 buffer_info->skb = NULL;
1726 }
1727
1728 for (j = 0; j < PS_PAGE_BUFFERS; j++) {
1729 ps_page = &buffer_info->ps_pages[j];
1730 if (!ps_page->page)
1731 break;
1732 dma_unmap_page(&pdev->dev, ps_page->dma, PAGE_SIZE,
1733 DMA_FROM_DEVICE);
1734 ps_page->dma = 0;
1735 put_page(ps_page->page);
1736 ps_page->page = NULL;
1737 }
1738 }
1739
1740 /* there also may be some cached data from a chained receive */
1741 if (rx_ring->rx_skb_top) {
1742 dev_kfree_skb(rx_ring->rx_skb_top);
1743 rx_ring->rx_skb_top = NULL;
1744 }
1745
1746 /* Zero out the descriptor ring */
1747 memset(rx_ring->desc, 0, rx_ring->size);
1748
1749 rx_ring->next_to_clean = 0;
1750 rx_ring->next_to_use = 0;
1751 adapter->flags2 &= ~FLAG2_IS_DISCARDING;
1752}
1753
1754static void e1000e_downshift_workaround(struct work_struct *work)
1755{
1756 struct e1000_adapter *adapter = container_of(work,
1757 struct e1000_adapter,
1758 downshift_task);
1759
1760 if (test_bit(__E1000_DOWN, &adapter->state))
1761 return;
1762
1763 e1000e_gig_downshift_workaround_ich8lan(&adapter->hw);
1764}
1765
1766/**
1767 * e1000_intr_msi - Interrupt Handler
1768 * @irq: interrupt number
1769 * @data: pointer to a network interface device structure
1770 **/
1771static irqreturn_t e1000_intr_msi(int __always_unused irq, void *data)
1772{
1773 struct net_device *netdev = data;
1774 struct e1000_adapter *adapter = netdev_priv(netdev);
1775 struct e1000_hw *hw = &adapter->hw;
1776 u32 icr = er32(ICR);
1777
1778 /* read ICR disables interrupts using IAM */
1779 if (icr & E1000_ICR_LSC) {
1780 hw->mac.get_link_status = true;
1781 /* ICH8 workaround-- Call gig speed drop workaround on cable
1782 * disconnect (LSC) before accessing any PHY registers
1783 */
1784 if ((adapter->flags & FLAG_LSC_GIG_SPEED_DROP) &&
1785 (!(er32(STATUS) & E1000_STATUS_LU)))
1786 schedule_work(&adapter->downshift_task);
1787
1788 /* 80003ES2LAN workaround-- For packet buffer work-around on
1789 * link down event; disable receives here in the ISR and reset
1790 * adapter in watchdog
1791 */
1792 if (netif_carrier_ok(netdev) &&
1793 adapter->flags & FLAG_RX_NEEDS_RESTART) {
1794 /* disable receives */
1795 u32 rctl = er32(RCTL);
1796
1797 ew32(RCTL, rctl & ~E1000_RCTL_EN);
1798 adapter->flags |= FLAG_RESTART_NOW;
1799 }
1800 /* guard against interrupt when we're going down */
1801 if (!test_bit(__E1000_DOWN, &adapter->state))
1802 mod_timer(&adapter->watchdog_timer, jiffies + 1);
1803 }
1804
1805 /* Reset on uncorrectable ECC error */
1806 if ((icr & E1000_ICR_ECCER) && (hw->mac.type >= e1000_pch_lpt)) {
1807 u32 pbeccsts = er32(PBECCSTS);
1808
1809 adapter->corr_errors +=
1810 pbeccsts & E1000_PBECCSTS_CORR_ERR_CNT_MASK;
1811 adapter->uncorr_errors +=
1812 (pbeccsts & E1000_PBECCSTS_UNCORR_ERR_CNT_MASK) >>
1813 E1000_PBECCSTS_UNCORR_ERR_CNT_SHIFT;
1814
1815 /* Do the reset outside of interrupt context */
1816 schedule_work(&adapter->reset_task);
1817
1818 /* return immediately since reset is imminent */
1819 return IRQ_HANDLED;
1820 }
1821
1822 if (napi_schedule_prep(&adapter->napi)) {
1823 adapter->total_tx_bytes = 0;
1824 adapter->total_tx_packets = 0;
1825 adapter->total_rx_bytes = 0;
1826 adapter->total_rx_packets = 0;
1827 __napi_schedule(&adapter->napi);
1828 }
1829
1830 return IRQ_HANDLED;
1831}
1832
1833/**
1834 * e1000_intr - Interrupt Handler
1835 * @irq: interrupt number
1836 * @data: pointer to a network interface device structure
1837 **/
1838static irqreturn_t e1000_intr(int __always_unused irq, void *data)
1839{
1840 struct net_device *netdev = data;
1841 struct e1000_adapter *adapter = netdev_priv(netdev);
1842 struct e1000_hw *hw = &adapter->hw;
1843 u32 rctl, icr = er32(ICR);
1844
1845 if (!icr || test_bit(__E1000_DOWN, &adapter->state))
1846 return IRQ_NONE; /* Not our interrupt */
1847
1848 /* IMS will not auto-mask if INT_ASSERTED is not set, and if it is
1849 * not set, then the adapter didn't send an interrupt
1850 */
1851 if (!(icr & E1000_ICR_INT_ASSERTED))
1852 return IRQ_NONE;
1853
1854 /* Interrupt Auto-Mask...upon reading ICR,
1855 * interrupts are masked. No need for the
1856 * IMC write
1857 */
1858
1859 if (icr & E1000_ICR_LSC) {
1860 hw->mac.get_link_status = true;
1861 /* ICH8 workaround-- Call gig speed drop workaround on cable
1862 * disconnect (LSC) before accessing any PHY registers
1863 */
1864 if ((adapter->flags & FLAG_LSC_GIG_SPEED_DROP) &&
1865 (!(er32(STATUS) & E1000_STATUS_LU)))
1866 schedule_work(&adapter->downshift_task);
1867
1868 /* 80003ES2LAN workaround--
1869 * For packet buffer work-around on link down event;
1870 * disable receives here in the ISR and
1871 * reset adapter in watchdog
1872 */
1873 if (netif_carrier_ok(netdev) &&
1874 (adapter->flags & FLAG_RX_NEEDS_RESTART)) {
1875 /* disable receives */
1876 rctl = er32(RCTL);
1877 ew32(RCTL, rctl & ~E1000_RCTL_EN);
1878 adapter->flags |= FLAG_RESTART_NOW;
1879 }
1880 /* guard against interrupt when we're going down */
1881 if (!test_bit(__E1000_DOWN, &adapter->state))
1882 mod_timer(&adapter->watchdog_timer, jiffies + 1);
1883 }
1884
1885 /* Reset on uncorrectable ECC error */
1886 if ((icr & E1000_ICR_ECCER) && (hw->mac.type >= e1000_pch_lpt)) {
1887 u32 pbeccsts = er32(PBECCSTS);
1888
1889 adapter->corr_errors +=
1890 pbeccsts & E1000_PBECCSTS_CORR_ERR_CNT_MASK;
1891 adapter->uncorr_errors +=
1892 (pbeccsts & E1000_PBECCSTS_UNCORR_ERR_CNT_MASK) >>
1893 E1000_PBECCSTS_UNCORR_ERR_CNT_SHIFT;
1894
1895 /* Do the reset outside of interrupt context */
1896 schedule_work(&adapter->reset_task);
1897
1898 /* return immediately since reset is imminent */
1899 return IRQ_HANDLED;
1900 }
1901
1902 if (napi_schedule_prep(&adapter->napi)) {
1903 adapter->total_tx_bytes = 0;
1904 adapter->total_tx_packets = 0;
1905 adapter->total_rx_bytes = 0;
1906 adapter->total_rx_packets = 0;
1907 __napi_schedule(&adapter->napi);
1908 }
1909
1910 return IRQ_HANDLED;
1911}
1912
1913static irqreturn_t e1000_msix_other(int __always_unused irq, void *data)
1914{
1915 struct net_device *netdev = data;
1916 struct e1000_adapter *adapter = netdev_priv(netdev);
1917 struct e1000_hw *hw = &adapter->hw;
1918 u32 icr = er32(ICR);
1919
1920 if (icr & adapter->eiac_mask)
1921 ew32(ICS, (icr & adapter->eiac_mask));
1922
1923 if (icr & E1000_ICR_LSC) {
1924 hw->mac.get_link_status = true;
1925 /* guard against interrupt when we're going down */
1926 if (!test_bit(__E1000_DOWN, &adapter->state))
1927 mod_timer(&adapter->watchdog_timer, jiffies + 1);
1928 }
1929
1930 if (!test_bit(__E1000_DOWN, &adapter->state))
1931 ew32(IMS, E1000_IMS_OTHER | IMS_OTHER_MASK);
1932
1933 return IRQ_HANDLED;
1934}
1935
1936static irqreturn_t e1000_intr_msix_tx(int __always_unused irq, void *data)
1937{
1938 struct net_device *netdev = data;
1939 struct e1000_adapter *adapter = netdev_priv(netdev);
1940 struct e1000_hw *hw = &adapter->hw;
1941 struct e1000_ring *tx_ring = adapter->tx_ring;
1942
1943 adapter->total_tx_bytes = 0;
1944 adapter->total_tx_packets = 0;
1945
1946 if (!e1000_clean_tx_irq(tx_ring))
1947 /* Ring was not completely cleaned, so fire another interrupt */
1948 ew32(ICS, tx_ring->ims_val);
1949
1950 if (!test_bit(__E1000_DOWN, &adapter->state))
1951 ew32(IMS, adapter->tx_ring->ims_val);
1952
1953 return IRQ_HANDLED;
1954}
1955
1956static irqreturn_t e1000_intr_msix_rx(int __always_unused irq, void *data)
1957{
1958 struct net_device *netdev = data;
1959 struct e1000_adapter *adapter = netdev_priv(netdev);
1960 struct e1000_ring *rx_ring = adapter->rx_ring;
1961
1962 /* Write the ITR value calculated at the end of the
1963 * previous interrupt.
1964 */
1965 if (rx_ring->set_itr) {
1966 u32 itr = rx_ring->itr_val ?
1967 1000000000 / (rx_ring->itr_val * 256) : 0;
1968
1969 writel(itr, rx_ring->itr_register);
1970 rx_ring->set_itr = 0;
1971 }
1972
1973 if (napi_schedule_prep(&adapter->napi)) {
1974 adapter->total_rx_bytes = 0;
1975 adapter->total_rx_packets = 0;
1976 __napi_schedule(&adapter->napi);
1977 }
1978 return IRQ_HANDLED;
1979}
1980
1981/**
1982 * e1000_configure_msix - Configure MSI-X hardware
1983 *
1984 * e1000_configure_msix sets up the hardware to properly
1985 * generate MSI-X interrupts.
1986 **/
1987static void e1000_configure_msix(struct e1000_adapter *adapter)
1988{
1989 struct e1000_hw *hw = &adapter->hw;
1990 struct e1000_ring *rx_ring = adapter->rx_ring;
1991 struct e1000_ring *tx_ring = adapter->tx_ring;
1992 int vector = 0;
1993 u32 ctrl_ext, ivar = 0;
1994
1995 adapter->eiac_mask = 0;
1996
1997 /* Workaround issue with spurious interrupts on 82574 in MSI-X mode */
1998 if (hw->mac.type == e1000_82574) {
1999 u32 rfctl = er32(RFCTL);
2000
2001 rfctl |= E1000_RFCTL_ACK_DIS;
2002 ew32(RFCTL, rfctl);
2003 }
2004
2005 /* Configure Rx vector */
2006 rx_ring->ims_val = E1000_IMS_RXQ0;
2007 adapter->eiac_mask |= rx_ring->ims_val;
2008 if (rx_ring->itr_val)
2009 writel(1000000000 / (rx_ring->itr_val * 256),
2010 rx_ring->itr_register);
2011 else
2012 writel(1, rx_ring->itr_register);
2013 ivar = E1000_IVAR_INT_ALLOC_VALID | vector;
2014
2015 /* Configure Tx vector */
2016 tx_ring->ims_val = E1000_IMS_TXQ0;
2017 vector++;
2018 if (tx_ring->itr_val)
2019 writel(1000000000 / (tx_ring->itr_val * 256),
2020 tx_ring->itr_register);
2021 else
2022 writel(1, tx_ring->itr_register);
2023 adapter->eiac_mask |= tx_ring->ims_val;
2024 ivar |= ((E1000_IVAR_INT_ALLOC_VALID | vector) << 8);
2025
2026 /* set vector for Other Causes, e.g. link changes */
2027 vector++;
2028 ivar |= ((E1000_IVAR_INT_ALLOC_VALID | vector) << 16);
2029 if (rx_ring->itr_val)
2030 writel(1000000000 / (rx_ring->itr_val * 256),
2031 hw->hw_addr + E1000_EITR_82574(vector));
2032 else
2033 writel(1, hw->hw_addr + E1000_EITR_82574(vector));
2034
2035 /* Cause Tx interrupts on every write back */
2036 ivar |= BIT(31);
2037
2038 ew32(IVAR, ivar);
2039
2040 /* enable MSI-X PBA support */
2041 ctrl_ext = er32(CTRL_EXT) & ~E1000_CTRL_EXT_IAME;
2042 ctrl_ext |= E1000_CTRL_EXT_PBA_CLR | E1000_CTRL_EXT_EIAME;
2043 ew32(CTRL_EXT, ctrl_ext);
2044 e1e_flush();
2045}
2046
2047void e1000e_reset_interrupt_capability(struct e1000_adapter *adapter)
2048{
2049 if (adapter->msix_entries) {
2050 pci_disable_msix(adapter->pdev);
2051 kfree(adapter->msix_entries);
2052 adapter->msix_entries = NULL;
2053 } else if (adapter->flags & FLAG_MSI_ENABLED) {
2054 pci_disable_msi(adapter->pdev);
2055 adapter->flags &= ~FLAG_MSI_ENABLED;
2056 }
2057}
2058
2059/**
2060 * e1000e_set_interrupt_capability - set MSI or MSI-X if supported
2061 *
2062 * Attempt to configure interrupts using the best available
2063 * capabilities of the hardware and kernel.
2064 **/
2065void e1000e_set_interrupt_capability(struct e1000_adapter *adapter)
2066{
2067 int err;
2068 int i;
2069
2070 switch (adapter->int_mode) {
2071 case E1000E_INT_MODE_MSIX:
2072 if (adapter->flags & FLAG_HAS_MSIX) {
2073 adapter->num_vectors = 3; /* RxQ0, TxQ0 and other */
2074 adapter->msix_entries = kcalloc(adapter->num_vectors,
2075 sizeof(struct
2076 msix_entry),
2077 GFP_KERNEL);
2078 if (adapter->msix_entries) {
2079 struct e1000_adapter *a = adapter;
2080
2081 for (i = 0; i < adapter->num_vectors; i++)
2082 adapter->msix_entries[i].entry = i;
2083
2084 err = pci_enable_msix_range(a->pdev,
2085 a->msix_entries,
2086 a->num_vectors,
2087 a->num_vectors);
2088 if (err > 0)
2089 return;
2090 }
2091 /* MSI-X failed, so fall through and try MSI */
2092 e_err("Failed to initialize MSI-X interrupts. Falling back to MSI interrupts.\n");
2093 e1000e_reset_interrupt_capability(adapter);
2094 }
2095 adapter->int_mode = E1000E_INT_MODE_MSI;
2096 /* Fall through */
2097 case E1000E_INT_MODE_MSI:
2098 if (!pci_enable_msi(adapter->pdev)) {
2099 adapter->flags |= FLAG_MSI_ENABLED;
2100 } else {
2101 adapter->int_mode = E1000E_INT_MODE_LEGACY;
2102 e_err("Failed to initialize MSI interrupts. Falling back to legacy interrupts.\n");
2103 }
2104 /* Fall through */
2105 case E1000E_INT_MODE_LEGACY:
2106 /* Don't do anything; this is the system default */
2107 break;
2108 }
2109
2110 /* store the number of vectors being used */
2111 adapter->num_vectors = 1;
2112}
2113
2114/**
2115 * e1000_request_msix - Initialize MSI-X interrupts
2116 *
2117 * e1000_request_msix allocates MSI-X vectors and requests interrupts from the
2118 * kernel.
2119 **/
2120static int e1000_request_msix(struct e1000_adapter *adapter)
2121{
2122 struct net_device *netdev = adapter->netdev;
2123 int err = 0, vector = 0;
2124
2125 if (strlen(netdev->name) < (IFNAMSIZ - 5))
2126 snprintf(adapter->rx_ring->name,
2127 sizeof(adapter->rx_ring->name) - 1,
2128 "%s-rx-0", netdev->name);
2129 else
2130 memcpy(adapter->rx_ring->name, netdev->name, IFNAMSIZ);
2131 err = request_irq(adapter->msix_entries[vector].vector,
2132 e1000_intr_msix_rx, 0, adapter->rx_ring->name,
2133 netdev);
2134 if (err)
2135 return err;
2136 adapter->rx_ring->itr_register = adapter->hw.hw_addr +
2137 E1000_EITR_82574(vector);
2138 adapter->rx_ring->itr_val = adapter->itr;
2139 vector++;
2140
2141 if (strlen(netdev->name) < (IFNAMSIZ - 5))
2142 snprintf(adapter->tx_ring->name,
2143 sizeof(adapter->tx_ring->name) - 1,
2144 "%s-tx-0", netdev->name);
2145 else
2146 memcpy(adapter->tx_ring->name, netdev->name, IFNAMSIZ);
2147 err = request_irq(adapter->msix_entries[vector].vector,
2148 e1000_intr_msix_tx, 0, adapter->tx_ring->name,
2149 netdev);
2150 if (err)
2151 return err;
2152 adapter->tx_ring->itr_register = adapter->hw.hw_addr +
2153 E1000_EITR_82574(vector);
2154 adapter->tx_ring->itr_val = adapter->itr;
2155 vector++;
2156
2157 err = request_irq(adapter->msix_entries[vector].vector,
2158 e1000_msix_other, 0, netdev->name, netdev);
2159 if (err)
2160 return err;
2161
2162 e1000_configure_msix(adapter);
2163
2164 return 0;
2165}
2166
2167/**
2168 * e1000_request_irq - initialize interrupts
2169 *
2170 * Attempts to configure interrupts using the best available
2171 * capabilities of the hardware and kernel.
2172 **/
2173static int e1000_request_irq(struct e1000_adapter *adapter)
2174{
2175 struct net_device *netdev = adapter->netdev;
2176 int err;
2177
2178 if (adapter->msix_entries) {
2179 err = e1000_request_msix(adapter);
2180 if (!err)
2181 return err;
2182 /* fall back to MSI */
2183 e1000e_reset_interrupt_capability(adapter);
2184 adapter->int_mode = E1000E_INT_MODE_MSI;
2185 e1000e_set_interrupt_capability(adapter);
2186 }
2187 if (adapter->flags & FLAG_MSI_ENABLED) {
2188 err = request_irq(adapter->pdev->irq, e1000_intr_msi, 0,
2189 netdev->name, netdev);
2190 if (!err)
2191 return err;
2192
2193 /* fall back to legacy interrupt */
2194 e1000e_reset_interrupt_capability(adapter);
2195 adapter->int_mode = E1000E_INT_MODE_LEGACY;
2196 }
2197
2198 err = request_irq(adapter->pdev->irq, e1000_intr, IRQF_SHARED,
2199 netdev->name, netdev);
2200 if (err)
2201 e_err("Unable to allocate interrupt, Error: %d\n", err);
2202
2203 return err;
2204}
2205
2206static void e1000_free_irq(struct e1000_adapter *adapter)
2207{
2208 struct net_device *netdev = adapter->netdev;
2209
2210 if (adapter->msix_entries) {
2211 int vector = 0;
2212
2213 free_irq(adapter->msix_entries[vector].vector, netdev);
2214 vector++;
2215
2216 free_irq(adapter->msix_entries[vector].vector, netdev);
2217 vector++;
2218
2219 /* Other Causes interrupt vector */
2220 free_irq(adapter->msix_entries[vector].vector, netdev);
2221 return;
2222 }
2223
2224 free_irq(adapter->pdev->irq, netdev);
2225}
2226
2227/**
2228 * e1000_irq_disable - Mask off interrupt generation on the NIC
2229 **/
2230static void e1000_irq_disable(struct e1000_adapter *adapter)
2231{
2232 struct e1000_hw *hw = &adapter->hw;
2233
2234 ew32(IMC, ~0);
2235 if (adapter->msix_entries)
2236 ew32(EIAC_82574, 0);
2237 e1e_flush();
2238
2239 if (adapter->msix_entries) {
2240 int i;
2241
2242 for (i = 0; i < adapter->num_vectors; i++)
2243 synchronize_irq(adapter->msix_entries[i].vector);
2244 } else {
2245 synchronize_irq(adapter->pdev->irq);
2246 }
2247}
2248
2249/**
2250 * e1000_irq_enable - Enable default interrupt generation settings
2251 **/
2252static void e1000_irq_enable(struct e1000_adapter *adapter)
2253{
2254 struct e1000_hw *hw = &adapter->hw;
2255
2256 if (adapter->msix_entries) {
2257 ew32(EIAC_82574, adapter->eiac_mask & E1000_EIAC_MASK_82574);
2258 ew32(IMS, adapter->eiac_mask | E1000_IMS_OTHER |
2259 IMS_OTHER_MASK);
2260 } else if (hw->mac.type >= e1000_pch_lpt) {
2261 ew32(IMS, IMS_ENABLE_MASK | E1000_IMS_ECCER);
2262 } else {
2263 ew32(IMS, IMS_ENABLE_MASK);
2264 }
2265 e1e_flush();
2266}
2267
2268/**
2269 * e1000e_get_hw_control - get control of the h/w from f/w
2270 * @adapter: address of board private structure
2271 *
2272 * e1000e_get_hw_control sets {CTRL_EXT|SWSM}:DRV_LOAD bit.
2273 * For ASF and Pass Through versions of f/w this means that
2274 * the driver is loaded. For AMT version (only with 82573)
2275 * of the f/w this means that the network i/f is open.
2276 **/
2277void e1000e_get_hw_control(struct e1000_adapter *adapter)
2278{
2279 struct e1000_hw *hw = &adapter->hw;
2280 u32 ctrl_ext;
2281 u32 swsm;
2282
2283 /* Let firmware know the driver has taken over */
2284 if (adapter->flags & FLAG_HAS_SWSM_ON_LOAD) {
2285 swsm = er32(SWSM);
2286 ew32(SWSM, swsm | E1000_SWSM_DRV_LOAD);
2287 } else if (adapter->flags & FLAG_HAS_CTRLEXT_ON_LOAD) {
2288 ctrl_ext = er32(CTRL_EXT);
2289 ew32(CTRL_EXT, ctrl_ext | E1000_CTRL_EXT_DRV_LOAD);
2290 }
2291}
2292
2293/**
2294 * e1000e_release_hw_control - release control of the h/w to f/w
2295 * @adapter: address of board private structure
2296 *
2297 * e1000e_release_hw_control resets {CTRL_EXT|SWSM}:DRV_LOAD bit.
2298 * For ASF and Pass Through versions of f/w this means that the
2299 * driver is no longer loaded. For AMT version (only with 82573) i
2300 * of the f/w this means that the network i/f is closed.
2301 *
2302 **/
2303void e1000e_release_hw_control(struct e1000_adapter *adapter)
2304{
2305 struct e1000_hw *hw = &adapter->hw;
2306 u32 ctrl_ext;
2307 u32 swsm;
2308
2309 /* Let firmware taken over control of h/w */
2310 if (adapter->flags & FLAG_HAS_SWSM_ON_LOAD) {
2311 swsm = er32(SWSM);
2312 ew32(SWSM, swsm & ~E1000_SWSM_DRV_LOAD);
2313 } else if (adapter->flags & FLAG_HAS_CTRLEXT_ON_LOAD) {
2314 ctrl_ext = er32(CTRL_EXT);
2315 ew32(CTRL_EXT, ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD);
2316 }
2317}
2318
2319/**
2320 * e1000_alloc_ring_dma - allocate memory for a ring structure
2321 **/
2322static int e1000_alloc_ring_dma(struct e1000_adapter *adapter,
2323 struct e1000_ring *ring)
2324{
2325 struct pci_dev *pdev = adapter->pdev;
2326
2327 ring->desc = dma_zalloc_coherent(&pdev->dev, ring->size, &ring->dma,
2328 GFP_KERNEL);
2329 if (!ring->desc)
2330 return -ENOMEM;
2331
2332 return 0;
2333}
2334
2335/**
2336 * e1000e_setup_tx_resources - allocate Tx resources (Descriptors)
2337 * @tx_ring: Tx descriptor ring
2338 *
2339 * Return 0 on success, negative on failure
2340 **/
2341int e1000e_setup_tx_resources(struct e1000_ring *tx_ring)
2342{
2343 struct e1000_adapter *adapter = tx_ring->adapter;
2344 int err = -ENOMEM, size;
2345
2346 size = sizeof(struct e1000_buffer) * tx_ring->count;
2347 tx_ring->buffer_info = vzalloc(size);
2348 if (!tx_ring->buffer_info)
2349 goto err;
2350
2351 /* round up to nearest 4K */
2352 tx_ring->size = tx_ring->count * sizeof(struct e1000_tx_desc);
2353 tx_ring->size = ALIGN(tx_ring->size, 4096);
2354
2355 err = e1000_alloc_ring_dma(adapter, tx_ring);
2356 if (err)
2357 goto err;
2358
2359 tx_ring->next_to_use = 0;
2360 tx_ring->next_to_clean = 0;
2361
2362 return 0;
2363err:
2364 vfree(tx_ring->buffer_info);
2365 e_err("Unable to allocate memory for the transmit descriptor ring\n");
2366 return err;
2367}
2368
2369/**
2370 * e1000e_setup_rx_resources - allocate Rx resources (Descriptors)
2371 * @rx_ring: Rx descriptor ring
2372 *
2373 * Returns 0 on success, negative on failure
2374 **/
2375int e1000e_setup_rx_resources(struct e1000_ring *rx_ring)
2376{
2377 struct e1000_adapter *adapter = rx_ring->adapter;
2378 struct e1000_buffer *buffer_info;
2379 int i, size, desc_len, err = -ENOMEM;
2380
2381 size = sizeof(struct e1000_buffer) * rx_ring->count;
2382 rx_ring->buffer_info = vzalloc(size);
2383 if (!rx_ring->buffer_info)
2384 goto err;
2385
2386 for (i = 0; i < rx_ring->count; i++) {
2387 buffer_info = &rx_ring->buffer_info[i];
2388 buffer_info->ps_pages = kcalloc(PS_PAGE_BUFFERS,
2389 sizeof(struct e1000_ps_page),
2390 GFP_KERNEL);
2391 if (!buffer_info->ps_pages)
2392 goto err_pages;
2393 }
2394
2395 desc_len = sizeof(union e1000_rx_desc_packet_split);
2396
2397 /* Round up to nearest 4K */
2398 rx_ring->size = rx_ring->count * desc_len;
2399 rx_ring->size = ALIGN(rx_ring->size, 4096);
2400
2401 err = e1000_alloc_ring_dma(adapter, rx_ring);
2402 if (err)
2403 goto err_pages;
2404
2405 rx_ring->next_to_clean = 0;
2406 rx_ring->next_to_use = 0;
2407 rx_ring->rx_skb_top = NULL;
2408
2409 return 0;
2410
2411err_pages:
2412 for (i = 0; i < rx_ring->count; i++) {
2413 buffer_info = &rx_ring->buffer_info[i];
2414 kfree(buffer_info->ps_pages);
2415 }
2416err:
2417 vfree(rx_ring->buffer_info);
2418 e_err("Unable to allocate memory for the receive descriptor ring\n");
2419 return err;
2420}
2421
2422/**
2423 * e1000_clean_tx_ring - Free Tx Buffers
2424 * @tx_ring: Tx descriptor ring
2425 **/
2426static void e1000_clean_tx_ring(struct e1000_ring *tx_ring)
2427{
2428 struct e1000_adapter *adapter = tx_ring->adapter;
2429 struct e1000_buffer *buffer_info;
2430 unsigned long size;
2431 unsigned int i;
2432
2433 for (i = 0; i < tx_ring->count; i++) {
2434 buffer_info = &tx_ring->buffer_info[i];
2435 e1000_put_txbuf(tx_ring, buffer_info, false);
2436 }
2437
2438 netdev_reset_queue(adapter->netdev);
2439 size = sizeof(struct e1000_buffer) * tx_ring->count;
2440 memset(tx_ring->buffer_info, 0, size);
2441
2442 memset(tx_ring->desc, 0, tx_ring->size);
2443
2444 tx_ring->next_to_use = 0;
2445 tx_ring->next_to_clean = 0;
2446}
2447
2448/**
2449 * e1000e_free_tx_resources - Free Tx Resources per Queue
2450 * @tx_ring: Tx descriptor ring
2451 *
2452 * Free all transmit software resources
2453 **/
2454void e1000e_free_tx_resources(struct e1000_ring *tx_ring)
2455{
2456 struct e1000_adapter *adapter = tx_ring->adapter;
2457 struct pci_dev *pdev = adapter->pdev;
2458
2459 e1000_clean_tx_ring(tx_ring);
2460
2461 vfree(tx_ring->buffer_info);
2462 tx_ring->buffer_info = NULL;
2463
2464 dma_free_coherent(&pdev->dev, tx_ring->size, tx_ring->desc,
2465 tx_ring->dma);
2466 tx_ring->desc = NULL;
2467}
2468
2469/**
2470 * e1000e_free_rx_resources - Free Rx Resources
2471 * @rx_ring: Rx descriptor ring
2472 *
2473 * Free all receive software resources
2474 **/
2475void e1000e_free_rx_resources(struct e1000_ring *rx_ring)
2476{
2477 struct e1000_adapter *adapter = rx_ring->adapter;
2478 struct pci_dev *pdev = adapter->pdev;
2479 int i;
2480
2481 e1000_clean_rx_ring(rx_ring);
2482
2483 for (i = 0; i < rx_ring->count; i++)
2484 kfree(rx_ring->buffer_info[i].ps_pages);
2485
2486 vfree(rx_ring->buffer_info);
2487 rx_ring->buffer_info = NULL;
2488
2489 dma_free_coherent(&pdev->dev, rx_ring->size, rx_ring->desc,
2490 rx_ring->dma);
2491 rx_ring->desc = NULL;
2492}
2493
2494/**
2495 * e1000_update_itr - update the dynamic ITR value based on statistics
2496 * @adapter: pointer to adapter
2497 * @itr_setting: current adapter->itr
2498 * @packets: the number of packets during this measurement interval
2499 * @bytes: the number of bytes during this measurement interval
2500 *
2501 * Stores a new ITR value based on packets and byte
2502 * counts during the last interrupt. The advantage of per interrupt
2503 * computation is faster updates and more accurate ITR for the current
2504 * traffic pattern. Constants in this function were computed
2505 * based on theoretical maximum wire speed and thresholds were set based
2506 * on testing data as well as attempting to minimize response time
2507 * while increasing bulk throughput. This functionality is controlled
2508 * by the InterruptThrottleRate module parameter.
2509 **/
2510static unsigned int e1000_update_itr(u16 itr_setting, int packets, int bytes)
2511{
2512 unsigned int retval = itr_setting;
2513
2514 if (packets == 0)
2515 return itr_setting;
2516
2517 switch (itr_setting) {
2518 case lowest_latency:
2519 /* handle TSO and jumbo frames */
2520 if (bytes / packets > 8000)
2521 retval = bulk_latency;
2522 else if ((packets < 5) && (bytes > 512))
2523 retval = low_latency;
2524 break;
2525 case low_latency: /* 50 usec aka 20000 ints/s */
2526 if (bytes > 10000) {
2527 /* this if handles the TSO accounting */
2528 if (bytes / packets > 8000)
2529 retval = bulk_latency;
2530 else if ((packets < 10) || ((bytes / packets) > 1200))
2531 retval = bulk_latency;
2532 else if ((packets > 35))
2533 retval = lowest_latency;
2534 } else if (bytes / packets > 2000) {
2535 retval = bulk_latency;
2536 } else if (packets <= 2 && bytes < 512) {
2537 retval = lowest_latency;
2538 }
2539 break;
2540 case bulk_latency: /* 250 usec aka 4000 ints/s */
2541 if (bytes > 25000) {
2542 if (packets > 35)
2543 retval = low_latency;
2544 } else if (bytes < 6000) {
2545 retval = low_latency;
2546 }
2547 break;
2548 }
2549
2550 return retval;
2551}
2552
2553static void e1000_set_itr(struct e1000_adapter *adapter)
2554{
2555 u16 current_itr;
2556 u32 new_itr = adapter->itr;
2557
2558 /* for non-gigabit speeds, just fix the interrupt rate at 4000 */
2559 if (adapter->link_speed != SPEED_1000) {
2560 current_itr = 0;
2561 new_itr = 4000;
2562 goto set_itr_now;
2563 }
2564
2565 if (adapter->flags2 & FLAG2_DISABLE_AIM) {
2566 new_itr = 0;
2567 goto set_itr_now;
2568 }
2569
2570 adapter->tx_itr = e1000_update_itr(adapter->tx_itr,
2571 adapter->total_tx_packets,
2572 adapter->total_tx_bytes);
2573 /* conservative mode (itr 3) eliminates the lowest_latency setting */
2574 if (adapter->itr_setting == 3 && adapter->tx_itr == lowest_latency)
2575 adapter->tx_itr = low_latency;
2576
2577 adapter->rx_itr = e1000_update_itr(adapter->rx_itr,
2578 adapter->total_rx_packets,
2579 adapter->total_rx_bytes);
2580 /* conservative mode (itr 3) eliminates the lowest_latency setting */
2581 if (adapter->itr_setting == 3 && adapter->rx_itr == lowest_latency)
2582 adapter->rx_itr = low_latency;
2583
2584 current_itr = max(adapter->rx_itr, adapter->tx_itr);
2585
2586 /* counts and packets in update_itr are dependent on these numbers */
2587 switch (current_itr) {
2588 case lowest_latency:
2589 new_itr = 70000;
2590 break;
2591 case low_latency:
2592 new_itr = 20000; /* aka hwitr = ~200 */
2593 break;
2594 case bulk_latency:
2595 new_itr = 4000;
2596 break;
2597 default:
2598 break;
2599 }
2600
2601set_itr_now:
2602 if (new_itr != adapter->itr) {
2603 /* this attempts to bias the interrupt rate towards Bulk
2604 * by adding intermediate steps when interrupt rate is
2605 * increasing
2606 */
2607 new_itr = new_itr > adapter->itr ?
2608 min(adapter->itr + (new_itr >> 2), new_itr) : new_itr;
2609 adapter->itr = new_itr;
2610 adapter->rx_ring->itr_val = new_itr;
2611 if (adapter->msix_entries)
2612 adapter->rx_ring->set_itr = 1;
2613 else
2614 e1000e_write_itr(adapter, new_itr);
2615 }
2616}
2617
2618/**
2619 * e1000e_write_itr - write the ITR value to the appropriate registers
2620 * @adapter: address of board private structure
2621 * @itr: new ITR value to program
2622 *
2623 * e1000e_write_itr determines if the adapter is in MSI-X mode
2624 * and, if so, writes the EITR registers with the ITR value.
2625 * Otherwise, it writes the ITR value into the ITR register.
2626 **/
2627void e1000e_write_itr(struct e1000_adapter *adapter, u32 itr)
2628{
2629 struct e1000_hw *hw = &adapter->hw;
2630 u32 new_itr = itr ? 1000000000 / (itr * 256) : 0;
2631
2632 if (adapter->msix_entries) {
2633 int vector;
2634
2635 for (vector = 0; vector < adapter->num_vectors; vector++)
2636 writel(new_itr, hw->hw_addr + E1000_EITR_82574(vector));
2637 } else {
2638 ew32(ITR, new_itr);
2639 }
2640}
2641
2642/**
2643 * e1000_alloc_queues - Allocate memory for all rings
2644 * @adapter: board private structure to initialize
2645 **/
2646static int e1000_alloc_queues(struct e1000_adapter *adapter)
2647{
2648 int size = sizeof(struct e1000_ring);
2649
2650 adapter->tx_ring = kzalloc(size, GFP_KERNEL);
2651 if (!adapter->tx_ring)
2652 goto err;
2653 adapter->tx_ring->count = adapter->tx_ring_count;
2654 adapter->tx_ring->adapter = adapter;
2655
2656 adapter->rx_ring = kzalloc(size, GFP_KERNEL);
2657 if (!adapter->rx_ring)
2658 goto err;
2659 adapter->rx_ring->count = adapter->rx_ring_count;
2660 adapter->rx_ring->adapter = adapter;
2661
2662 return 0;
2663err:
2664 e_err("Unable to allocate memory for queues\n");
2665 kfree(adapter->rx_ring);
2666 kfree(adapter->tx_ring);
2667 return -ENOMEM;
2668}
2669
2670/**
2671 * e1000e_poll - NAPI Rx polling callback
2672 * @napi: struct associated with this polling callback
2673 * @weight: number of packets driver is allowed to process this poll
2674 **/
2675static int e1000e_poll(struct napi_struct *napi, int weight)
2676{
2677 struct e1000_adapter *adapter = container_of(napi, struct e1000_adapter,
2678 napi);
2679 struct e1000_hw *hw = &adapter->hw;
2680 struct net_device *poll_dev = adapter->netdev;
2681 int tx_cleaned = 1, work_done = 0;
2682
2683 adapter = netdev_priv(poll_dev);
2684
2685 if (!adapter->msix_entries ||
2686 (adapter->rx_ring->ims_val & adapter->tx_ring->ims_val))
2687 tx_cleaned = e1000_clean_tx_irq(adapter->tx_ring);
2688
2689 adapter->clean_rx(adapter->rx_ring, &work_done, weight);
2690
2691 if (!tx_cleaned)
2692 work_done = weight;
2693
2694 /* If weight not fully consumed, exit the polling mode */
2695 if (work_done < weight) {
2696 if (adapter->itr_setting & 3)
2697 e1000_set_itr(adapter);
2698 napi_complete_done(napi, work_done);
2699 if (!test_bit(__E1000_DOWN, &adapter->state)) {
2700 if (adapter->msix_entries)
2701 ew32(IMS, adapter->rx_ring->ims_val);
2702 else
2703 e1000_irq_enable(adapter);
2704 }
2705 }
2706
2707 return work_done;
2708}
2709
2710static int e1000_vlan_rx_add_vid(struct net_device *netdev,
2711 __always_unused __be16 proto, u16 vid)
2712{
2713 struct e1000_adapter *adapter = netdev_priv(netdev);
2714 struct e1000_hw *hw = &adapter->hw;
2715 u32 vfta, index;
2716
2717 /* don't update vlan cookie if already programmed */
2718 if ((adapter->hw.mng_cookie.status &
2719 E1000_MNG_DHCP_COOKIE_STATUS_VLAN) &&
2720 (vid == adapter->mng_vlan_id))
2721 return 0;
2722
2723 /* add VID to filter table */
2724 if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) {
2725 index = (vid >> 5) & 0x7F;
2726 vfta = E1000_READ_REG_ARRAY(hw, E1000_VFTA, index);
2727 vfta |= BIT((vid & 0x1F));
2728 hw->mac.ops.write_vfta(hw, index, vfta);
2729 }
2730
2731 set_bit(vid, adapter->active_vlans);
2732
2733 return 0;
2734}
2735
2736static int e1000_vlan_rx_kill_vid(struct net_device *netdev,
2737 __always_unused __be16 proto, u16 vid)
2738{
2739 struct e1000_adapter *adapter = netdev_priv(netdev);
2740 struct e1000_hw *hw = &adapter->hw;
2741 u32 vfta, index;
2742
2743 if ((adapter->hw.mng_cookie.status &
2744 E1000_MNG_DHCP_COOKIE_STATUS_VLAN) &&
2745 (vid == adapter->mng_vlan_id)) {
2746 /* release control to f/w */
2747 e1000e_release_hw_control(adapter);
2748 return 0;
2749 }
2750
2751 /* remove VID from filter table */
2752 if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) {
2753 index = (vid >> 5) & 0x7F;
2754 vfta = E1000_READ_REG_ARRAY(hw, E1000_VFTA, index);
2755 vfta &= ~BIT((vid & 0x1F));
2756 hw->mac.ops.write_vfta(hw, index, vfta);
2757 }
2758
2759 clear_bit(vid, adapter->active_vlans);
2760
2761 return 0;
2762}
2763
2764/**
2765 * e1000e_vlan_filter_disable - helper to disable hw VLAN filtering
2766 * @adapter: board private structure to initialize
2767 **/
2768static void e1000e_vlan_filter_disable(struct e1000_adapter *adapter)
2769{
2770 struct net_device *netdev = adapter->netdev;
2771 struct e1000_hw *hw = &adapter->hw;
2772 u32 rctl;
2773
2774 if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) {
2775 /* disable VLAN receive filtering */
2776 rctl = er32(RCTL);
2777 rctl &= ~(E1000_RCTL_VFE | E1000_RCTL_CFIEN);
2778 ew32(RCTL, rctl);
2779
2780 if (adapter->mng_vlan_id != (u16)E1000_MNG_VLAN_NONE) {
2781 e1000_vlan_rx_kill_vid(netdev, htons(ETH_P_8021Q),
2782 adapter->mng_vlan_id);
2783 adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
2784 }
2785 }
2786}
2787
2788/**
2789 * e1000e_vlan_filter_enable - helper to enable HW VLAN filtering
2790 * @adapter: board private structure to initialize
2791 **/
2792static void e1000e_vlan_filter_enable(struct e1000_adapter *adapter)
2793{
2794 struct e1000_hw *hw = &adapter->hw;
2795 u32 rctl;
2796
2797 if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) {
2798 /* enable VLAN receive filtering */
2799 rctl = er32(RCTL);
2800 rctl |= E1000_RCTL_VFE;
2801 rctl &= ~E1000_RCTL_CFIEN;
2802 ew32(RCTL, rctl);
2803 }
2804}
2805
2806/**
2807 * e1000e_vlan_strip_disable - helper to disable HW VLAN stripping
2808 * @adapter: board private structure to initialize
2809 **/
2810static void e1000e_vlan_strip_disable(struct e1000_adapter *adapter)
2811{
2812 struct e1000_hw *hw = &adapter->hw;
2813 u32 ctrl;
2814
2815 /* disable VLAN tag insert/strip */
2816 ctrl = er32(CTRL);
2817 ctrl &= ~E1000_CTRL_VME;
2818 ew32(CTRL, ctrl);
2819}
2820
2821/**
2822 * e1000e_vlan_strip_enable - helper to enable HW VLAN stripping
2823 * @adapter: board private structure to initialize
2824 **/
2825static void e1000e_vlan_strip_enable(struct e1000_adapter *adapter)
2826{
2827 struct e1000_hw *hw = &adapter->hw;
2828 u32 ctrl;
2829
2830 /* enable VLAN tag insert/strip */
2831 ctrl = er32(CTRL);
2832 ctrl |= E1000_CTRL_VME;
2833 ew32(CTRL, ctrl);
2834}
2835
2836static void e1000_update_mng_vlan(struct e1000_adapter *adapter)
2837{
2838 struct net_device *netdev = adapter->netdev;
2839 u16 vid = adapter->hw.mng_cookie.vlan_id;
2840 u16 old_vid = adapter->mng_vlan_id;
2841
2842 if (adapter->hw.mng_cookie.status & E1000_MNG_DHCP_COOKIE_STATUS_VLAN) {
2843 e1000_vlan_rx_add_vid(netdev, htons(ETH_P_8021Q), vid);
2844 adapter->mng_vlan_id = vid;
2845 }
2846
2847 if ((old_vid != (u16)E1000_MNG_VLAN_NONE) && (vid != old_vid))
2848 e1000_vlan_rx_kill_vid(netdev, htons(ETH_P_8021Q), old_vid);
2849}
2850
2851static void e1000_restore_vlan(struct e1000_adapter *adapter)
2852{
2853 u16 vid;
2854
2855 e1000_vlan_rx_add_vid(adapter->netdev, htons(ETH_P_8021Q), 0);
2856
2857 for_each_set_bit(vid, adapter->active_vlans, VLAN_N_VID)
2858 e1000_vlan_rx_add_vid(adapter->netdev, htons(ETH_P_8021Q), vid);
2859}
2860
2861static void e1000_init_manageability_pt(struct e1000_adapter *adapter)
2862{
2863 struct e1000_hw *hw = &adapter->hw;
2864 u32 manc, manc2h, mdef, i, j;
2865
2866 if (!(adapter->flags & FLAG_MNG_PT_ENABLED))
2867 return;
2868
2869 manc = er32(MANC);
2870
2871 /* enable receiving management packets to the host. this will probably
2872 * generate destination unreachable messages from the host OS, but
2873 * the packets will be handled on SMBUS
2874 */
2875 manc |= E1000_MANC_EN_MNG2HOST;
2876 manc2h = er32(MANC2H);
2877
2878 switch (hw->mac.type) {
2879 default:
2880 manc2h |= (E1000_MANC2H_PORT_623 | E1000_MANC2H_PORT_664);
2881 break;
2882 case e1000_82574:
2883 case e1000_82583:
2884 /* Check if IPMI pass-through decision filter already exists;
2885 * if so, enable it.
2886 */
2887 for (i = 0, j = 0; i < 8; i++) {
2888 mdef = er32(MDEF(i));
2889
2890 /* Ignore filters with anything other than IPMI ports */
2891 if (mdef & ~(E1000_MDEF_PORT_623 | E1000_MDEF_PORT_664))
2892 continue;
2893
2894 /* Enable this decision filter in MANC2H */
2895 if (mdef)
2896 manc2h |= BIT(i);
2897
2898 j |= mdef;
2899 }
2900
2901 if (j == (E1000_MDEF_PORT_623 | E1000_MDEF_PORT_664))
2902 break;
2903
2904 /* Create new decision filter in an empty filter */
2905 for (i = 0, j = 0; i < 8; i++)
2906 if (er32(MDEF(i)) == 0) {
2907 ew32(MDEF(i), (E1000_MDEF_PORT_623 |
2908 E1000_MDEF_PORT_664));
2909 manc2h |= BIT(1);
2910 j++;
2911 break;
2912 }
2913
2914 if (!j)
2915 e_warn("Unable to create IPMI pass-through filter\n");
2916 break;
2917 }
2918
2919 ew32(MANC2H, manc2h);
2920 ew32(MANC, manc);
2921}
2922
2923/**
2924 * e1000_configure_tx - Configure Transmit Unit after Reset
2925 * @adapter: board private structure
2926 *
2927 * Configure the Tx unit of the MAC after a reset.
2928 **/
2929static void e1000_configure_tx(struct e1000_adapter *adapter)
2930{
2931 struct e1000_hw *hw = &adapter->hw;
2932 struct e1000_ring *tx_ring = adapter->tx_ring;
2933 u64 tdba;
2934 u32 tdlen, tctl, tarc;
2935
2936 /* Setup the HW Tx Head and Tail descriptor pointers */
2937 tdba = tx_ring->dma;
2938 tdlen = tx_ring->count * sizeof(struct e1000_tx_desc);
2939 ew32(TDBAL(0), (tdba & DMA_BIT_MASK(32)));
2940 ew32(TDBAH(0), (tdba >> 32));
2941 ew32(TDLEN(0), tdlen);
2942 ew32(TDH(0), 0);
2943 ew32(TDT(0), 0);
2944 tx_ring->head = adapter->hw.hw_addr + E1000_TDH(0);
2945 tx_ring->tail = adapter->hw.hw_addr + E1000_TDT(0);
2946
2947 writel(0, tx_ring->head);
2948 if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA)
2949 e1000e_update_tdt_wa(tx_ring, 0);
2950 else
2951 writel(0, tx_ring->tail);
2952
2953 /* Set the Tx Interrupt Delay register */
2954 ew32(TIDV, adapter->tx_int_delay);
2955 /* Tx irq moderation */
2956 ew32(TADV, adapter->tx_abs_int_delay);
2957
2958 if (adapter->flags2 & FLAG2_DMA_BURST) {
2959 u32 txdctl = er32(TXDCTL(0));
2960
2961 txdctl &= ~(E1000_TXDCTL_PTHRESH | E1000_TXDCTL_HTHRESH |
2962 E1000_TXDCTL_WTHRESH);
2963 /* set up some performance related parameters to encourage the
2964 * hardware to use the bus more efficiently in bursts, depends
2965 * on the tx_int_delay to be enabled,
2966 * wthresh = 1 ==> burst write is disabled to avoid Tx stalls
2967 * hthresh = 1 ==> prefetch when one or more available
2968 * pthresh = 0x1f ==> prefetch if internal cache 31 or less
2969 * BEWARE: this seems to work but should be considered first if
2970 * there are Tx hangs or other Tx related bugs
2971 */
2972 txdctl |= E1000_TXDCTL_DMA_BURST_ENABLE;
2973 ew32(TXDCTL(0), txdctl);
2974 }
2975 /* erratum work around: set txdctl the same for both queues */
2976 ew32(TXDCTL(1), er32(TXDCTL(0)));
2977
2978 /* Program the Transmit Control Register */
2979 tctl = er32(TCTL);
2980 tctl &= ~E1000_TCTL_CT;
2981 tctl |= E1000_TCTL_PSP | E1000_TCTL_RTLC |
2982 (E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT);
2983
2984 if (adapter->flags & FLAG_TARC_SPEED_MODE_BIT) {
2985 tarc = er32(TARC(0));
2986 /* set the speed mode bit, we'll clear it if we're not at
2987 * gigabit link later
2988 */
2989#define SPEED_MODE_BIT BIT(21)
2990 tarc |= SPEED_MODE_BIT;
2991 ew32(TARC(0), tarc);
2992 }
2993
2994 /* errata: program both queues to unweighted RR */
2995 if (adapter->flags & FLAG_TARC_SET_BIT_ZERO) {
2996 tarc = er32(TARC(0));
2997 tarc |= 1;
2998 ew32(TARC(0), tarc);
2999 tarc = er32(TARC(1));
3000 tarc |= 1;
3001 ew32(TARC(1), tarc);
3002 }
3003
3004 /* Setup Transmit Descriptor Settings for eop descriptor */
3005 adapter->txd_cmd = E1000_TXD_CMD_EOP | E1000_TXD_CMD_IFCS;
3006
3007 /* only set IDE if we are delaying interrupts using the timers */
3008 if (adapter->tx_int_delay)
3009 adapter->txd_cmd |= E1000_TXD_CMD_IDE;
3010
3011 /* enable Report Status bit */
3012 adapter->txd_cmd |= E1000_TXD_CMD_RS;
3013
3014 ew32(TCTL, tctl);
3015
3016 hw->mac.ops.config_collision_dist(hw);
3017
3018 /* SPT and KBL Si errata workaround to avoid data corruption */
3019 if (hw->mac.type == e1000_pch_spt) {
3020 u32 reg_val;
3021
3022 reg_val = er32(IOSFPC);
3023 reg_val |= E1000_RCTL_RDMTS_HEX;
3024 ew32(IOSFPC, reg_val);
3025
3026 reg_val = er32(TARC(0));
3027 /* SPT and KBL Si errata workaround to avoid Tx hang.
3028 * Dropping the number of outstanding requests from
3029 * 3 to 2 in order to avoid a buffer overrun.
3030 */
3031 reg_val &= ~E1000_TARC0_CB_MULTIQ_3_REQ;
3032 reg_val |= E1000_TARC0_CB_MULTIQ_2_REQ;
3033 ew32(TARC(0), reg_val);
3034 }
3035}
3036
3037/**
3038 * e1000_setup_rctl - configure the receive control registers
3039 * @adapter: Board private structure
3040 **/
3041#define PAGE_USE_COUNT(S) (((S) >> PAGE_SHIFT) + \
3042 (((S) & (PAGE_SIZE - 1)) ? 1 : 0))
3043static void e1000_setup_rctl(struct e1000_adapter *adapter)
3044{
3045 struct e1000_hw *hw = &adapter->hw;
3046 u32 rctl, rfctl;
3047 u32 pages = 0;
3048
3049 /* Workaround Si errata on PCHx - configure jumbo frame flow.
3050 * If jumbo frames not set, program related MAC/PHY registers
3051 * to h/w defaults
3052 */
3053 if (hw->mac.type >= e1000_pch2lan) {
3054 s32 ret_val;
3055
3056 if (adapter->netdev->mtu > ETH_DATA_LEN)
3057 ret_val = e1000_lv_jumbo_workaround_ich8lan(hw, true);
3058 else
3059 ret_val = e1000_lv_jumbo_workaround_ich8lan(hw, false);
3060
3061 if (ret_val)
3062 e_dbg("failed to enable|disable jumbo frame workaround mode\n");
3063 }
3064
3065 /* Program MC offset vector base */
3066 rctl = er32(RCTL);
3067 rctl &= ~(3 << E1000_RCTL_MO_SHIFT);
3068 rctl |= E1000_RCTL_EN | E1000_RCTL_BAM |
3069 E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF |
3070 (adapter->hw.mac.mc_filter_type << E1000_RCTL_MO_SHIFT);
3071
3072 /* Do not Store bad packets */
3073 rctl &= ~E1000_RCTL_SBP;
3074
3075 /* Enable Long Packet receive */
3076 if (adapter->netdev->mtu <= ETH_DATA_LEN)
3077 rctl &= ~E1000_RCTL_LPE;
3078 else
3079 rctl |= E1000_RCTL_LPE;
3080
3081 /* Some systems expect that the CRC is included in SMBUS traffic. The
3082 * hardware strips the CRC before sending to both SMBUS (BMC) and to
3083 * host memory when this is enabled
3084 */
3085 if (adapter->flags2 & FLAG2_CRC_STRIPPING)
3086 rctl |= E1000_RCTL_SECRC;
3087
3088 /* Workaround Si errata on 82577 PHY - configure IPG for jumbos */
3089 if ((hw->phy.type == e1000_phy_82577) && (rctl & E1000_RCTL_LPE)) {
3090 u16 phy_data;
3091
3092 e1e_rphy(hw, PHY_REG(770, 26), &phy_data);
3093 phy_data &= 0xfff8;
3094 phy_data |= BIT(2);
3095 e1e_wphy(hw, PHY_REG(770, 26), phy_data);
3096
3097 e1e_rphy(hw, 22, &phy_data);
3098 phy_data &= 0x0fff;
3099 phy_data |= BIT(14);
3100 e1e_wphy(hw, 0x10, 0x2823);
3101 e1e_wphy(hw, 0x11, 0x0003);
3102 e1e_wphy(hw, 22, phy_data);
3103 }
3104
3105 /* Setup buffer sizes */
3106 rctl &= ~E1000_RCTL_SZ_4096;
3107 rctl |= E1000_RCTL_BSEX;
3108 switch (adapter->rx_buffer_len) {
3109 case 2048:
3110 default:
3111 rctl |= E1000_RCTL_SZ_2048;
3112 rctl &= ~E1000_RCTL_BSEX;
3113 break;
3114 case 4096:
3115 rctl |= E1000_RCTL_SZ_4096;
3116 break;
3117 case 8192:
3118 rctl |= E1000_RCTL_SZ_8192;
3119 break;
3120 case 16384:
3121 rctl |= E1000_RCTL_SZ_16384;
3122 break;
3123 }
3124
3125 /* Enable Extended Status in all Receive Descriptors */
3126 rfctl = er32(RFCTL);
3127 rfctl |= E1000_RFCTL_EXTEN;
3128 ew32(RFCTL, rfctl);
3129
3130 /* 82571 and greater support packet-split where the protocol
3131 * header is placed in skb->data and the packet data is
3132 * placed in pages hanging off of skb_shinfo(skb)->nr_frags.
3133 * In the case of a non-split, skb->data is linearly filled,
3134 * followed by the page buffers. Therefore, skb->data is
3135 * sized to hold the largest protocol header.
3136 *
3137 * allocations using alloc_page take too long for regular MTU
3138 * so only enable packet split for jumbo frames
3139 *
3140 * Using pages when the page size is greater than 16k wastes
3141 * a lot of memory, since we allocate 3 pages at all times
3142 * per packet.
3143 */
3144 pages = PAGE_USE_COUNT(adapter->netdev->mtu);
3145 if ((pages <= 3) && (PAGE_SIZE <= 16384) && (rctl & E1000_RCTL_LPE))
3146 adapter->rx_ps_pages = pages;
3147 else
3148 adapter->rx_ps_pages = 0;
3149
3150 if (adapter->rx_ps_pages) {
3151 u32 psrctl = 0;
3152
3153 /* Enable Packet split descriptors */
3154 rctl |= E1000_RCTL_DTYP_PS;
3155
3156 psrctl |= adapter->rx_ps_bsize0 >> E1000_PSRCTL_BSIZE0_SHIFT;
3157
3158 switch (adapter->rx_ps_pages) {
3159 case 3:
3160 psrctl |= PAGE_SIZE << E1000_PSRCTL_BSIZE3_SHIFT;
3161 /* fall-through */
3162 case 2:
3163 psrctl |= PAGE_SIZE << E1000_PSRCTL_BSIZE2_SHIFT;
3164 /* fall-through */
3165 case 1:
3166 psrctl |= PAGE_SIZE >> E1000_PSRCTL_BSIZE1_SHIFT;
3167 break;
3168 }
3169
3170 ew32(PSRCTL, psrctl);
3171 }
3172
3173 /* This is useful for sniffing bad packets. */
3174 if (adapter->netdev->features & NETIF_F_RXALL) {
3175 /* UPE and MPE will be handled by normal PROMISC logic
3176 * in e1000e_set_rx_mode
3177 */
3178 rctl |= (E1000_RCTL_SBP | /* Receive bad packets */
3179 E1000_RCTL_BAM | /* RX All Bcast Pkts */
3180 E1000_RCTL_PMCF); /* RX All MAC Ctrl Pkts */
3181
3182 rctl &= ~(E1000_RCTL_VFE | /* Disable VLAN filter */
3183 E1000_RCTL_DPF | /* Allow filtered pause */
3184 E1000_RCTL_CFIEN); /* Dis VLAN CFIEN Filter */
3185 /* Do not mess with E1000_CTRL_VME, it affects transmit as well,
3186 * and that breaks VLANs.
3187 */
3188 }
3189
3190 ew32(RCTL, rctl);
3191 /* just started the receive unit, no need to restart */
3192 adapter->flags &= ~FLAG_RESTART_NOW;
3193}
3194
3195/**
3196 * e1000_configure_rx - Configure Receive Unit after Reset
3197 * @adapter: board private structure
3198 *
3199 * Configure the Rx unit of the MAC after a reset.
3200 **/
3201static void e1000_configure_rx(struct e1000_adapter *adapter)
3202{
3203 struct e1000_hw *hw = &adapter->hw;
3204 struct e1000_ring *rx_ring = adapter->rx_ring;
3205 u64 rdba;
3206 u32 rdlen, rctl, rxcsum, ctrl_ext;
3207
3208 if (adapter->rx_ps_pages) {
3209 /* this is a 32 byte descriptor */
3210 rdlen = rx_ring->count *
3211 sizeof(union e1000_rx_desc_packet_split);
3212 adapter->clean_rx = e1000_clean_rx_irq_ps;
3213 adapter->alloc_rx_buf = e1000_alloc_rx_buffers_ps;
3214 } else if (adapter->netdev->mtu > ETH_FRAME_LEN + ETH_FCS_LEN) {
3215 rdlen = rx_ring->count * sizeof(union e1000_rx_desc_extended);
3216 adapter->clean_rx = e1000_clean_jumbo_rx_irq;
3217 adapter->alloc_rx_buf = e1000_alloc_jumbo_rx_buffers;
3218 } else {
3219 rdlen = rx_ring->count * sizeof(union e1000_rx_desc_extended);
3220 adapter->clean_rx = e1000_clean_rx_irq;
3221 adapter->alloc_rx_buf = e1000_alloc_rx_buffers;
3222 }
3223
3224 /* disable receives while setting up the descriptors */
3225 rctl = er32(RCTL);
3226 if (!(adapter->flags2 & FLAG2_NO_DISABLE_RX))
3227 ew32(RCTL, rctl & ~E1000_RCTL_EN);
3228 e1e_flush();
3229 usleep_range(10000, 20000);
3230
3231 if (adapter->flags2 & FLAG2_DMA_BURST) {
3232 /* set the writeback threshold (only takes effect if the RDTR
3233 * is set). set GRAN=1 and write back up to 0x4 worth, and
3234 * enable prefetching of 0x20 Rx descriptors
3235 * granularity = 01
3236 * wthresh = 04,
3237 * hthresh = 04,
3238 * pthresh = 0x20
3239 */
3240 ew32(RXDCTL(0), E1000_RXDCTL_DMA_BURST_ENABLE);
3241 ew32(RXDCTL(1), E1000_RXDCTL_DMA_BURST_ENABLE);
3242 }
3243
3244 /* set the Receive Delay Timer Register */
3245 ew32(RDTR, adapter->rx_int_delay);
3246
3247 /* irq moderation */
3248 ew32(RADV, adapter->rx_abs_int_delay);
3249 if ((adapter->itr_setting != 0) && (adapter->itr != 0))
3250 e1000e_write_itr(adapter, adapter->itr);
3251
3252 ctrl_ext = er32(CTRL_EXT);
3253 /* Auto-Mask interrupts upon ICR access */
3254 ctrl_ext |= E1000_CTRL_EXT_IAME;
3255 ew32(IAM, 0xffffffff);
3256 ew32(CTRL_EXT, ctrl_ext);
3257 e1e_flush();
3258
3259 /* Setup the HW Rx Head and Tail Descriptor Pointers and
3260 * the Base and Length of the Rx Descriptor Ring
3261 */
3262 rdba = rx_ring->dma;
3263 ew32(RDBAL(0), (rdba & DMA_BIT_MASK(32)));
3264 ew32(RDBAH(0), (rdba >> 32));
3265 ew32(RDLEN(0), rdlen);
3266 ew32(RDH(0), 0);
3267 ew32(RDT(0), 0);
3268 rx_ring->head = adapter->hw.hw_addr + E1000_RDH(0);
3269 rx_ring->tail = adapter->hw.hw_addr + E1000_RDT(0);
3270
3271 writel(0, rx_ring->head);
3272 if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA)
3273 e1000e_update_rdt_wa(rx_ring, 0);
3274 else
3275 writel(0, rx_ring->tail);
3276
3277 /* Enable Receive Checksum Offload for TCP and UDP */
3278 rxcsum = er32(RXCSUM);
3279 if (adapter->netdev->features & NETIF_F_RXCSUM)
3280 rxcsum |= E1000_RXCSUM_TUOFL;
3281 else
3282 rxcsum &= ~E1000_RXCSUM_TUOFL;
3283 ew32(RXCSUM, rxcsum);
3284
3285 /* With jumbo frames, excessive C-state transition latencies result
3286 * in dropped transactions.
3287 */
3288 if (adapter->netdev->mtu > ETH_DATA_LEN) {
3289 u32 lat =
3290 ((er32(PBA) & E1000_PBA_RXA_MASK) * 1024 -
3291 adapter->max_frame_size) * 8 / 1000;
3292
3293 if (adapter->flags & FLAG_IS_ICH) {
3294 u32 rxdctl = er32(RXDCTL(0));
3295
3296 ew32(RXDCTL(0), rxdctl | 0x3 | BIT(8));
3297 }
3298
3299 dev_info(&adapter->pdev->dev,
3300 "Some CPU C-states have been disabled in order to enable jumbo frames\n");
3301 pm_qos_update_request(&adapter->pm_qos_req, lat);
3302 } else {
3303 pm_qos_update_request(&adapter->pm_qos_req,
3304 PM_QOS_DEFAULT_VALUE);
3305 }
3306
3307 /* Enable Receives */
3308 ew32(RCTL, rctl);
3309}
3310
3311/**
3312 * e1000e_write_mc_addr_list - write multicast addresses to MTA
3313 * @netdev: network interface device structure
3314 *
3315 * Writes multicast address list to the MTA hash table.
3316 * Returns: -ENOMEM on failure
3317 * 0 on no addresses written
3318 * X on writing X addresses to MTA
3319 */
3320static int e1000e_write_mc_addr_list(struct net_device *netdev)
3321{
3322 struct e1000_adapter *adapter = netdev_priv(netdev);
3323 struct e1000_hw *hw = &adapter->hw;
3324 struct netdev_hw_addr *ha;
3325 u8 *mta_list;
3326 int i;
3327
3328 if (netdev_mc_empty(netdev)) {
3329 /* nothing to program, so clear mc list */
3330 hw->mac.ops.update_mc_addr_list(hw, NULL, 0);
3331 return 0;
3332 }
3333
3334 mta_list = kzalloc(netdev_mc_count(netdev) * ETH_ALEN, GFP_ATOMIC);
3335 if (!mta_list)
3336 return -ENOMEM;
3337
3338 /* update_mc_addr_list expects a packed array of only addresses. */
3339 i = 0;
3340 netdev_for_each_mc_addr(ha, netdev)
3341 memcpy(mta_list + (i++ * ETH_ALEN), ha->addr, ETH_ALEN);
3342
3343 hw->mac.ops.update_mc_addr_list(hw, mta_list, i);
3344 kfree(mta_list);
3345
3346 return netdev_mc_count(netdev);
3347}
3348
3349/**
3350 * e1000e_write_uc_addr_list - write unicast addresses to RAR table
3351 * @netdev: network interface device structure
3352 *
3353 * Writes unicast address list to the RAR table.
3354 * Returns: -ENOMEM on failure/insufficient address space
3355 * 0 on no addresses written
3356 * X on writing X addresses to the RAR table
3357 **/
3358static int e1000e_write_uc_addr_list(struct net_device *netdev)
3359{
3360 struct e1000_adapter *adapter = netdev_priv(netdev);
3361 struct e1000_hw *hw = &adapter->hw;
3362 unsigned int rar_entries;
3363 int count = 0;
3364
3365 rar_entries = hw->mac.ops.rar_get_count(hw);
3366
3367 /* save a rar entry for our hardware address */
3368 rar_entries--;
3369
3370 /* save a rar entry for the LAA workaround */
3371 if (adapter->flags & FLAG_RESET_OVERWRITES_LAA)
3372 rar_entries--;
3373
3374 /* return ENOMEM indicating insufficient memory for addresses */
3375 if (netdev_uc_count(netdev) > rar_entries)
3376 return -ENOMEM;
3377
3378 if (!netdev_uc_empty(netdev) && rar_entries) {
3379 struct netdev_hw_addr *ha;
3380
3381 /* write the addresses in reverse order to avoid write
3382 * combining
3383 */
3384 netdev_for_each_uc_addr(ha, netdev) {
3385 int ret_val;
3386
3387 if (!rar_entries)
3388 break;
3389 ret_val = hw->mac.ops.rar_set(hw, ha->addr, rar_entries--);
3390 if (ret_val < 0)
3391 return -ENOMEM;
3392 count++;
3393 }
3394 }
3395
3396 /* zero out the remaining RAR entries not used above */
3397 for (; rar_entries > 0; rar_entries--) {
3398 ew32(RAH(rar_entries), 0);
3399 ew32(RAL(rar_entries), 0);
3400 }
3401 e1e_flush();
3402
3403 return count;
3404}
3405
3406/**
3407 * e1000e_set_rx_mode - secondary unicast, Multicast and Promiscuous mode set
3408 * @netdev: network interface device structure
3409 *
3410 * The ndo_set_rx_mode entry point is called whenever the unicast or multicast
3411 * address list or the network interface flags are updated. This routine is
3412 * responsible for configuring the hardware for proper unicast, multicast,
3413 * promiscuous mode, and all-multi behavior.
3414 **/
3415static void e1000e_set_rx_mode(struct net_device *netdev)
3416{
3417 struct e1000_adapter *adapter = netdev_priv(netdev);
3418 struct e1000_hw *hw = &adapter->hw;
3419 u32 rctl;
3420
3421 if (pm_runtime_suspended(netdev->dev.parent))
3422 return;
3423
3424 /* Check for Promiscuous and All Multicast modes */
3425 rctl = er32(RCTL);
3426
3427 /* clear the affected bits */
3428 rctl &= ~(E1000_RCTL_UPE | E1000_RCTL_MPE);
3429
3430 if (netdev->flags & IFF_PROMISC) {
3431 rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE);
3432 /* Do not hardware filter VLANs in promisc mode */
3433 e1000e_vlan_filter_disable(adapter);
3434 } else {
3435 int count;
3436
3437 if (netdev->flags & IFF_ALLMULTI) {
3438 rctl |= E1000_RCTL_MPE;
3439 } else {
3440 /* Write addresses to the MTA, if the attempt fails
3441 * then we should just turn on promiscuous mode so
3442 * that we can at least receive multicast traffic
3443 */
3444 count = e1000e_write_mc_addr_list(netdev);
3445 if (count < 0)
3446 rctl |= E1000_RCTL_MPE;
3447 }
3448 e1000e_vlan_filter_enable(adapter);
3449 /* Write addresses to available RAR registers, if there is not
3450 * sufficient space to store all the addresses then enable
3451 * unicast promiscuous mode
3452 */
3453 count = e1000e_write_uc_addr_list(netdev);
3454 if (count < 0)
3455 rctl |= E1000_RCTL_UPE;
3456 }
3457
3458 ew32(RCTL, rctl);
3459
3460 if (netdev->features & NETIF_F_HW_VLAN_CTAG_RX)
3461 e1000e_vlan_strip_enable(adapter);
3462 else
3463 e1000e_vlan_strip_disable(adapter);
3464}
3465
3466static void e1000e_setup_rss_hash(struct e1000_adapter *adapter)
3467{
3468 struct e1000_hw *hw = &adapter->hw;
3469 u32 mrqc, rxcsum;
3470 u32 rss_key[10];
3471 int i;
3472
3473 netdev_rss_key_fill(rss_key, sizeof(rss_key));
3474 for (i = 0; i < 10; i++)
3475 ew32(RSSRK(i), rss_key[i]);
3476
3477 /* Direct all traffic to queue 0 */
3478 for (i = 0; i < 32; i++)
3479 ew32(RETA(i), 0);
3480
3481 /* Disable raw packet checksumming so that RSS hash is placed in
3482 * descriptor on writeback.
3483 */
3484 rxcsum = er32(RXCSUM);
3485 rxcsum |= E1000_RXCSUM_PCSD;
3486
3487 ew32(RXCSUM, rxcsum);
3488
3489 mrqc = (E1000_MRQC_RSS_FIELD_IPV4 |
3490 E1000_MRQC_RSS_FIELD_IPV4_TCP |
3491 E1000_MRQC_RSS_FIELD_IPV6 |
3492 E1000_MRQC_RSS_FIELD_IPV6_TCP |
3493 E1000_MRQC_RSS_FIELD_IPV6_TCP_EX);
3494
3495 ew32(MRQC, mrqc);
3496}
3497
3498/**
3499 * e1000e_get_base_timinca - get default SYSTIM time increment attributes
3500 * @adapter: board private structure
3501 * @timinca: pointer to returned time increment attributes
3502 *
3503 * Get attributes for incrementing the System Time Register SYSTIML/H at
3504 * the default base frequency, and set the cyclecounter shift value.
3505 **/
3506s32 e1000e_get_base_timinca(struct e1000_adapter *adapter, u32 *timinca)
3507{
3508 struct e1000_hw *hw = &adapter->hw;
3509 u32 incvalue, incperiod, shift;
3510
3511 /* Make sure clock is enabled on I217/I218/I219 before checking
3512 * the frequency
3513 */
3514 if ((hw->mac.type >= e1000_pch_lpt) &&
3515 !(er32(TSYNCTXCTL) & E1000_TSYNCTXCTL_ENABLED) &&
3516 !(er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_ENABLED)) {
3517 u32 fextnvm7 = er32(FEXTNVM7);
3518
3519 if (!(fextnvm7 & BIT(0))) {
3520 ew32(FEXTNVM7, fextnvm7 | BIT(0));
3521 e1e_flush();
3522 }
3523 }
3524
3525 switch (hw->mac.type) {
3526 case e1000_pch2lan:
3527 /* Stable 96MHz frequency */
3528 incperiod = INCPERIOD_96MHZ;
3529 incvalue = INCVALUE_96MHZ;
3530 shift = INCVALUE_SHIFT_96MHZ;
3531 adapter->cc.shift = shift + INCPERIOD_SHIFT_96MHZ;
3532 break;
3533 case e1000_pch_lpt:
3534 if (er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_SYSCFI) {
3535 /* Stable 96MHz frequency */
3536 incperiod = INCPERIOD_96MHZ;
3537 incvalue = INCVALUE_96MHZ;
3538 shift = INCVALUE_SHIFT_96MHZ;
3539 adapter->cc.shift = shift + INCPERIOD_SHIFT_96MHZ;
3540 } else {
3541 /* Stable 25MHz frequency */
3542 incperiod = INCPERIOD_25MHZ;
3543 incvalue = INCVALUE_25MHZ;
3544 shift = INCVALUE_SHIFT_25MHZ;
3545 adapter->cc.shift = shift;
3546 }
3547 break;
3548 case e1000_pch_spt:
3549 if (er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_SYSCFI) {
3550 /* Stable 24MHz frequency */
3551 incperiod = INCPERIOD_24MHZ;
3552 incvalue = INCVALUE_24MHZ;
3553 shift = INCVALUE_SHIFT_24MHZ;
3554 adapter->cc.shift = shift;
3555 break;
3556 }
3557 return -EINVAL;
3558 case e1000_pch_cnp:
3559 if (er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_SYSCFI) {
3560 /* Stable 24MHz frequency */
3561 incperiod = INCPERIOD_24MHZ;
3562 incvalue = INCVALUE_24MHZ;
3563 shift = INCVALUE_SHIFT_24MHZ;
3564 adapter->cc.shift = shift;
3565 } else {
3566 /* Stable 38400KHz frequency */
3567 incperiod = INCPERIOD_38400KHZ;
3568 incvalue = INCVALUE_38400KHZ;
3569 shift = INCVALUE_SHIFT_38400KHZ;
3570 adapter->cc.shift = shift;
3571 }
3572 break;
3573 case e1000_82574:
3574 case e1000_82583:
3575 /* Stable 25MHz frequency */
3576 incperiod = INCPERIOD_25MHZ;
3577 incvalue = INCVALUE_25MHZ;
3578 shift = INCVALUE_SHIFT_25MHZ;
3579 adapter->cc.shift = shift;
3580 break;
3581 default:
3582 return -EINVAL;
3583 }
3584
3585 *timinca = ((incperiod << E1000_TIMINCA_INCPERIOD_SHIFT) |
3586 ((incvalue << shift) & E1000_TIMINCA_INCVALUE_MASK));
3587
3588 return 0;
3589}
3590
3591/**
3592 * e1000e_config_hwtstamp - configure the hwtstamp registers and enable/disable
3593 * @adapter: board private structure
3594 *
3595 * Outgoing time stamping can be enabled and disabled. Play nice and
3596 * disable it when requested, although it shouldn't cause any overhead
3597 * when no packet needs it. At most one packet in the queue may be
3598 * marked for time stamping, otherwise it would be impossible to tell
3599 * for sure to which packet the hardware time stamp belongs.
3600 *
3601 * Incoming time stamping has to be configured via the hardware filters.
3602 * Not all combinations are supported, in particular event type has to be
3603 * specified. Matching the kind of event packet is not supported, with the
3604 * exception of "all V2 events regardless of level 2 or 4".
3605 **/
3606static int e1000e_config_hwtstamp(struct e1000_adapter *adapter,
3607 struct hwtstamp_config *config)
3608{
3609 struct e1000_hw *hw = &adapter->hw;
3610 u32 tsync_tx_ctl = E1000_TSYNCTXCTL_ENABLED;
3611 u32 tsync_rx_ctl = E1000_TSYNCRXCTL_ENABLED;
3612 u32 rxmtrl = 0;
3613 u16 rxudp = 0;
3614 bool is_l4 = false;
3615 bool is_l2 = false;
3616 u32 regval;
3617
3618 if (!(adapter->flags & FLAG_HAS_HW_TIMESTAMP))
3619 return -EINVAL;
3620
3621 /* flags reserved for future extensions - must be zero */
3622 if (config->flags)
3623 return -EINVAL;
3624
3625 switch (config->tx_type) {
3626 case HWTSTAMP_TX_OFF:
3627 tsync_tx_ctl = 0;
3628 break;
3629 case HWTSTAMP_TX_ON:
3630 break;
3631 default:
3632 return -ERANGE;
3633 }
3634
3635 switch (config->rx_filter) {
3636 case HWTSTAMP_FILTER_NONE:
3637 tsync_rx_ctl = 0;
3638 break;
3639 case HWTSTAMP_FILTER_PTP_V1_L4_SYNC:
3640 tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L4_V1;
3641 rxmtrl = E1000_RXMTRL_PTP_V1_SYNC_MESSAGE;
3642 is_l4 = true;
3643 break;
3644 case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ:
3645 tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L4_V1;
3646 rxmtrl = E1000_RXMTRL_PTP_V1_DELAY_REQ_MESSAGE;
3647 is_l4 = true;
3648 break;
3649 case HWTSTAMP_FILTER_PTP_V2_L2_SYNC:
3650 /* Also time stamps V2 L2 Path Delay Request/Response */
3651 tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L2_V2;
3652 rxmtrl = E1000_RXMTRL_PTP_V2_SYNC_MESSAGE;
3653 is_l2 = true;
3654 break;
3655 case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ:
3656 /* Also time stamps V2 L2 Path Delay Request/Response. */
3657 tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L2_V2;
3658 rxmtrl = E1000_RXMTRL_PTP_V2_DELAY_REQ_MESSAGE;
3659 is_l2 = true;
3660 break;
3661 case HWTSTAMP_FILTER_PTP_V2_L4_SYNC:
3662 /* Hardware cannot filter just V2 L4 Sync messages;
3663 * fall-through to V2 (both L2 and L4) Sync.
3664 */
3665 case HWTSTAMP_FILTER_PTP_V2_SYNC:
3666 /* Also time stamps V2 Path Delay Request/Response. */
3667 tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L2_L4_V2;
3668 rxmtrl = E1000_RXMTRL_PTP_V2_SYNC_MESSAGE;
3669 is_l2 = true;
3670 is_l4 = true;
3671 break;
3672 case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ:
3673 /* Hardware cannot filter just V2 L4 Delay Request messages;
3674 * fall-through to V2 (both L2 and L4) Delay Request.
3675 */
3676 case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ:
3677 /* Also time stamps V2 Path Delay Request/Response. */
3678 tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L2_L4_V2;
3679 rxmtrl = E1000_RXMTRL_PTP_V2_DELAY_REQ_MESSAGE;
3680 is_l2 = true;
3681 is_l4 = true;
3682 break;
3683 case HWTSTAMP_FILTER_PTP_V2_L4_EVENT:
3684 case HWTSTAMP_FILTER_PTP_V2_L2_EVENT:
3685 /* Hardware cannot filter just V2 L4 or L2 Event messages;
3686 * fall-through to all V2 (both L2 and L4) Events.
3687 */
3688 case HWTSTAMP_FILTER_PTP_V2_EVENT:
3689 tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_EVENT_V2;
3690 config->rx_filter = HWTSTAMP_FILTER_PTP_V2_EVENT;
3691 is_l2 = true;
3692 is_l4 = true;
3693 break;
3694 case HWTSTAMP_FILTER_PTP_V1_L4_EVENT:
3695 /* For V1, the hardware can only filter Sync messages or
3696 * Delay Request messages but not both so fall-through to
3697 * time stamp all packets.
3698 */
3699 case HWTSTAMP_FILTER_NTP_ALL:
3700 case HWTSTAMP_FILTER_ALL:
3701 is_l2 = true;
3702 is_l4 = true;
3703 tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_ALL;
3704 config->rx_filter = HWTSTAMP_FILTER_ALL;
3705 break;
3706 default:
3707 return -ERANGE;
3708 }
3709
3710 adapter->hwtstamp_config = *config;
3711
3712 /* enable/disable Tx h/w time stamping */
3713 regval = er32(TSYNCTXCTL);
3714 regval &= ~E1000_TSYNCTXCTL_ENABLED;
3715 regval |= tsync_tx_ctl;
3716 ew32(TSYNCTXCTL, regval);
3717 if ((er32(TSYNCTXCTL) & E1000_TSYNCTXCTL_ENABLED) !=
3718 (regval & E1000_TSYNCTXCTL_ENABLED)) {
3719 e_err("Timesync Tx Control register not set as expected\n");
3720 return -EAGAIN;
3721 }
3722
3723 /* enable/disable Rx h/w time stamping */
3724 regval = er32(TSYNCRXCTL);
3725 regval &= ~(E1000_TSYNCRXCTL_ENABLED | E1000_TSYNCRXCTL_TYPE_MASK);
3726 regval |= tsync_rx_ctl;
3727 ew32(TSYNCRXCTL, regval);
3728 if ((er32(TSYNCRXCTL) & (E1000_TSYNCRXCTL_ENABLED |
3729 E1000_TSYNCRXCTL_TYPE_MASK)) !=
3730 (regval & (E1000_TSYNCRXCTL_ENABLED |
3731 E1000_TSYNCRXCTL_TYPE_MASK))) {
3732 e_err("Timesync Rx Control register not set as expected\n");
3733 return -EAGAIN;
3734 }
3735
3736 /* L2: define ethertype filter for time stamped packets */
3737 if (is_l2)
3738 rxmtrl |= ETH_P_1588;
3739
3740 /* define which PTP packets get time stamped */
3741 ew32(RXMTRL, rxmtrl);
3742
3743 /* Filter by destination port */
3744 if (is_l4) {
3745 rxudp = PTP_EV_PORT;
3746 cpu_to_be16s(&rxudp);
3747 }
3748 ew32(RXUDP, rxudp);
3749
3750 e1e_flush();
3751
3752 /* Clear TSYNCRXCTL_VALID & TSYNCTXCTL_VALID bit */
3753 er32(RXSTMPH);
3754 er32(TXSTMPH);
3755
3756 return 0;
3757}
3758
3759/**
3760 * e1000_configure - configure the hardware for Rx and Tx
3761 * @adapter: private board structure
3762 **/
3763static void e1000_configure(struct e1000_adapter *adapter)
3764{
3765 struct e1000_ring *rx_ring = adapter->rx_ring;
3766
3767 e1000e_set_rx_mode(adapter->netdev);
3768
3769 e1000_restore_vlan(adapter);
3770 e1000_init_manageability_pt(adapter);
3771
3772 e1000_configure_tx(adapter);
3773
3774 if (adapter->netdev->features & NETIF_F_RXHASH)
3775 e1000e_setup_rss_hash(adapter);
3776 e1000_setup_rctl(adapter);
3777 e1000_configure_rx(adapter);
3778 adapter->alloc_rx_buf(rx_ring, e1000_desc_unused(rx_ring), GFP_KERNEL);
3779}
3780
3781/**
3782 * e1000e_power_up_phy - restore link in case the phy was powered down
3783 * @adapter: address of board private structure
3784 *
3785 * The phy may be powered down to save power and turn off link when the
3786 * driver is unloaded and wake on lan is not enabled (among others)
3787 * *** this routine MUST be followed by a call to e1000e_reset ***
3788 **/
3789void e1000e_power_up_phy(struct e1000_adapter *adapter)
3790{
3791 if (adapter->hw.phy.ops.power_up)
3792 adapter->hw.phy.ops.power_up(&adapter->hw);
3793
3794 adapter->hw.mac.ops.setup_link(&adapter->hw);
3795}
3796
3797/**
3798 * e1000_power_down_phy - Power down the PHY
3799 *
3800 * Power down the PHY so no link is implied when interface is down.
3801 * The PHY cannot be powered down if management or WoL is active.
3802 */
3803static void e1000_power_down_phy(struct e1000_adapter *adapter)
3804{
3805 if (adapter->hw.phy.ops.power_down)
3806 adapter->hw.phy.ops.power_down(&adapter->hw);
3807}
3808
3809/**
3810 * e1000_flush_tx_ring - remove all descriptors from the tx_ring
3811 *
3812 * We want to clear all pending descriptors from the TX ring.
3813 * zeroing happens when the HW reads the regs. We assign the ring itself as
3814 * the data of the next descriptor. We don't care about the data we are about
3815 * to reset the HW.
3816 */
3817static void e1000_flush_tx_ring(struct e1000_adapter *adapter)
3818{
3819 struct e1000_hw *hw = &adapter->hw;
3820 struct e1000_ring *tx_ring = adapter->tx_ring;
3821 struct e1000_tx_desc *tx_desc = NULL;
3822 u32 tdt, tctl, txd_lower = E1000_TXD_CMD_IFCS;
3823 u16 size = 512;
3824
3825 tctl = er32(TCTL);
3826 ew32(TCTL, tctl | E1000_TCTL_EN);
3827 tdt = er32(TDT(0));
3828 BUG_ON(tdt != tx_ring->next_to_use);
3829 tx_desc = E1000_TX_DESC(*tx_ring, tx_ring->next_to_use);
3830 tx_desc->buffer_addr = tx_ring->dma;
3831
3832 tx_desc->lower.data = cpu_to_le32(txd_lower | size);
3833 tx_desc->upper.data = 0;
3834 /* flush descriptors to memory before notifying the HW */
3835 wmb();
3836 tx_ring->next_to_use++;
3837 if (tx_ring->next_to_use == tx_ring->count)
3838 tx_ring->next_to_use = 0;
3839 ew32(TDT(0), tx_ring->next_to_use);
3840 mmiowb();
3841 usleep_range(200, 250);
3842}
3843
3844/**
3845 * e1000_flush_rx_ring - remove all descriptors from the rx_ring
3846 *
3847 * Mark all descriptors in the RX ring as consumed and disable the rx ring
3848 */
3849static void e1000_flush_rx_ring(struct e1000_adapter *adapter)
3850{
3851 u32 rctl, rxdctl;
3852 struct e1000_hw *hw = &adapter->hw;
3853
3854 rctl = er32(RCTL);
3855 ew32(RCTL, rctl & ~E1000_RCTL_EN);
3856 e1e_flush();
3857 usleep_range(100, 150);
3858
3859 rxdctl = er32(RXDCTL(0));
3860 /* zero the lower 14 bits (prefetch and host thresholds) */
3861 rxdctl &= 0xffffc000;
3862
3863 /* update thresholds: prefetch threshold to 31, host threshold to 1
3864 * and make sure the granularity is "descriptors" and not "cache lines"
3865 */
3866 rxdctl |= (0x1F | BIT(8) | E1000_RXDCTL_THRESH_UNIT_DESC);
3867
3868 ew32(RXDCTL(0), rxdctl);
3869 /* momentarily enable the RX ring for the changes to take effect */
3870 ew32(RCTL, rctl | E1000_RCTL_EN);
3871 e1e_flush();
3872 usleep_range(100, 150);
3873 ew32(RCTL, rctl & ~E1000_RCTL_EN);
3874}
3875
3876/**
3877 * e1000_flush_desc_rings - remove all descriptors from the descriptor rings
3878 *
3879 * In i219, the descriptor rings must be emptied before resetting the HW
3880 * or before changing the device state to D3 during runtime (runtime PM).
3881 *
3882 * Failure to do this will cause the HW to enter a unit hang state which can
3883 * only be released by PCI reset on the device
3884 *
3885 */
3886
3887static void e1000_flush_desc_rings(struct e1000_adapter *adapter)
3888{
3889 u16 hang_state;
3890 u32 fext_nvm11, tdlen;
3891 struct e1000_hw *hw = &adapter->hw;
3892
3893 /* First, disable MULR fix in FEXTNVM11 */
3894 fext_nvm11 = er32(FEXTNVM11);
3895 fext_nvm11 |= E1000_FEXTNVM11_DISABLE_MULR_FIX;
3896 ew32(FEXTNVM11, fext_nvm11);
3897 /* do nothing if we're not in faulty state, or if the queue is empty */
3898 tdlen = er32(TDLEN(0));
3899 pci_read_config_word(adapter->pdev, PCICFG_DESC_RING_STATUS,
3900 &hang_state);
3901 if (!(hang_state & FLUSH_DESC_REQUIRED) || !tdlen)
3902 return;
3903 e1000_flush_tx_ring(adapter);
3904 /* recheck, maybe the fault is caused by the rx ring */
3905 pci_read_config_word(adapter->pdev, PCICFG_DESC_RING_STATUS,
3906 &hang_state);
3907 if (hang_state & FLUSH_DESC_REQUIRED)
3908 e1000_flush_rx_ring(adapter);
3909}
3910
3911/**
3912 * e1000e_systim_reset - reset the timesync registers after a hardware reset
3913 * @adapter: board private structure
3914 *
3915 * When the MAC is reset, all hardware bits for timesync will be reset to the
3916 * default values. This function will restore the settings last in place.
3917 * Since the clock SYSTIME registers are reset, we will simply restore the
3918 * cyclecounter to the kernel real clock time.
3919 **/
3920static void e1000e_systim_reset(struct e1000_adapter *adapter)
3921{
3922 struct ptp_clock_info *info = &adapter->ptp_clock_info;
3923 struct e1000_hw *hw = &adapter->hw;
3924 unsigned long flags;
3925 u32 timinca;
3926 s32 ret_val;
3927
3928 if (!(adapter->flags & FLAG_HAS_HW_TIMESTAMP))
3929 return;
3930
3931 if (info->adjfreq) {
3932 /* restore the previous ptp frequency delta */
3933 ret_val = info->adjfreq(info, adapter->ptp_delta);
3934 } else {
3935 /* set the default base frequency if no adjustment possible */
3936 ret_val = e1000e_get_base_timinca(adapter, &timinca);
3937 if (!ret_val)
3938 ew32(TIMINCA, timinca);
3939 }
3940
3941 if (ret_val) {
3942 dev_warn(&adapter->pdev->dev,
3943 "Failed to restore TIMINCA clock rate delta: %d\n",
3944 ret_val);
3945 return;
3946 }
3947
3948 /* reset the systim ns time counter */
3949 spin_lock_irqsave(&adapter->systim_lock, flags);
3950 timecounter_init(&adapter->tc, &adapter->cc,
3951 ktime_to_ns(ktime_get_real()));
3952 spin_unlock_irqrestore(&adapter->systim_lock, flags);
3953
3954 /* restore the previous hwtstamp configuration settings */
3955 e1000e_config_hwtstamp(adapter, &adapter->hwtstamp_config);
3956}
3957
3958/**
3959 * e1000e_reset - bring the hardware into a known good state
3960 *
3961 * This function boots the hardware and enables some settings that
3962 * require a configuration cycle of the hardware - those cannot be
3963 * set/changed during runtime. After reset the device needs to be
3964 * properly configured for Rx, Tx etc.
3965 */
3966void e1000e_reset(struct e1000_adapter *adapter)
3967{
3968 struct e1000_mac_info *mac = &adapter->hw.mac;
3969 struct e1000_fc_info *fc = &adapter->hw.fc;
3970 struct e1000_hw *hw = &adapter->hw;
3971 u32 tx_space, min_tx_space, min_rx_space;
3972 u32 pba = adapter->pba;
3973 u16 hwm;
3974
3975 /* reset Packet Buffer Allocation to default */
3976 ew32(PBA, pba);
3977
3978 if (adapter->max_frame_size > (VLAN_ETH_FRAME_LEN + ETH_FCS_LEN)) {
3979 /* To maintain wire speed transmits, the Tx FIFO should be
3980 * large enough to accommodate two full transmit packets,
3981 * rounded up to the next 1KB and expressed in KB. Likewise,
3982 * the Rx FIFO should be large enough to accommodate at least
3983 * one full receive packet and is similarly rounded up and
3984 * expressed in KB.
3985 */
3986 pba = er32(PBA);
3987 /* upper 16 bits has Tx packet buffer allocation size in KB */
3988 tx_space = pba >> 16;
3989 /* lower 16 bits has Rx packet buffer allocation size in KB */
3990 pba &= 0xffff;
3991 /* the Tx fifo also stores 16 bytes of information about the Tx
3992 * but don't include ethernet FCS because hardware appends it
3993 */
3994 min_tx_space = (adapter->max_frame_size +
3995 sizeof(struct e1000_tx_desc) - ETH_FCS_LEN) * 2;
3996 min_tx_space = ALIGN(min_tx_space, 1024);
3997 min_tx_space >>= 10;
3998 /* software strips receive CRC, so leave room for it */
3999 min_rx_space = adapter->max_frame_size;
4000 min_rx_space = ALIGN(min_rx_space, 1024);
4001 min_rx_space >>= 10;
4002
4003 /* If current Tx allocation is less than the min Tx FIFO size,
4004 * and the min Tx FIFO size is less than the current Rx FIFO
4005 * allocation, take space away from current Rx allocation
4006 */
4007 if ((tx_space < min_tx_space) &&
4008 ((min_tx_space - tx_space) < pba)) {
4009 pba -= min_tx_space - tx_space;
4010
4011 /* if short on Rx space, Rx wins and must trump Tx
4012 * adjustment
4013 */
4014 if (pba < min_rx_space)
4015 pba = min_rx_space;
4016 }
4017
4018 ew32(PBA, pba);
4019 }
4020
4021 /* flow control settings
4022 *
4023 * The high water mark must be low enough to fit one full frame
4024 * (or the size used for early receive) above it in the Rx FIFO.
4025 * Set it to the lower of:
4026 * - 90% of the Rx FIFO size, and
4027 * - the full Rx FIFO size minus one full frame
4028 */
4029 if (adapter->flags & FLAG_DISABLE_FC_PAUSE_TIME)
4030 fc->pause_time = 0xFFFF;
4031 else
4032 fc->pause_time = E1000_FC_PAUSE_TIME;
4033 fc->send_xon = true;
4034 fc->current_mode = fc->requested_mode;
4035
4036 switch (hw->mac.type) {
4037 case e1000_ich9lan:
4038 case e1000_ich10lan:
4039 if (adapter->netdev->mtu > ETH_DATA_LEN) {
4040 pba = 14;
4041 ew32(PBA, pba);
4042 fc->high_water = 0x2800;
4043 fc->low_water = fc->high_water - 8;
4044 break;
4045 }
4046 /* fall-through */
4047 default:
4048 hwm = min(((pba << 10) * 9 / 10),
4049 ((pba << 10) - adapter->max_frame_size));
4050
4051 fc->high_water = hwm & E1000_FCRTH_RTH; /* 8-byte granularity */
4052 fc->low_water = fc->high_water - 8;
4053 break;
4054 case e1000_pchlan:
4055 /* Workaround PCH LOM adapter hangs with certain network
4056 * loads. If hangs persist, try disabling Tx flow control.
4057 */
4058 if (adapter->netdev->mtu > ETH_DATA_LEN) {
4059 fc->high_water = 0x3500;
4060 fc->low_water = 0x1500;
4061 } else {
4062 fc->high_water = 0x5000;
4063 fc->low_water = 0x3000;
4064 }
4065 fc->refresh_time = 0x1000;
4066 break;
4067 case e1000_pch2lan:
4068 case e1000_pch_lpt:
4069 case e1000_pch_spt:
4070 case e1000_pch_cnp:
4071 fc->refresh_time = 0x0400;
4072
4073 if (adapter->netdev->mtu <= ETH_DATA_LEN) {
4074 fc->high_water = 0x05C20;
4075 fc->low_water = 0x05048;
4076 fc->pause_time = 0x0650;
4077 break;
4078 }
4079
4080 pba = 14;
4081 ew32(PBA, pba);
4082 fc->high_water = ((pba << 10) * 9 / 10) & E1000_FCRTH_RTH;
4083 fc->low_water = ((pba << 10) * 8 / 10) & E1000_FCRTL_RTL;
4084 break;
4085 }
4086
4087 /* Alignment of Tx data is on an arbitrary byte boundary with the
4088 * maximum size per Tx descriptor limited only to the transmit
4089 * allocation of the packet buffer minus 96 bytes with an upper
4090 * limit of 24KB due to receive synchronization limitations.
4091 */
4092 adapter->tx_fifo_limit = min_t(u32, ((er32(PBA) >> 16) << 10) - 96,
4093 24 << 10);
4094
4095 /* Disable Adaptive Interrupt Moderation if 2 full packets cannot
4096 * fit in receive buffer.
4097 */
4098 if (adapter->itr_setting & 0x3) {
4099 if ((adapter->max_frame_size * 2) > (pba << 10)) {
4100 if (!(adapter->flags2 & FLAG2_DISABLE_AIM)) {
4101 dev_info(&adapter->pdev->dev,
4102 "Interrupt Throttle Rate off\n");
4103 adapter->flags2 |= FLAG2_DISABLE_AIM;
4104 e1000e_write_itr(adapter, 0);
4105 }
4106 } else if (adapter->flags2 & FLAG2_DISABLE_AIM) {
4107 dev_info(&adapter->pdev->dev,
4108 "Interrupt Throttle Rate on\n");
4109 adapter->flags2 &= ~FLAG2_DISABLE_AIM;
4110 adapter->itr = 20000;
4111 e1000e_write_itr(adapter, adapter->itr);
4112 }
4113 }
4114
4115 if (hw->mac.type >= e1000_pch_spt)
4116 e1000_flush_desc_rings(adapter);
4117 /* Allow time for pending master requests to run */
4118 mac->ops.reset_hw(hw);
4119
4120 /* For parts with AMT enabled, let the firmware know
4121 * that the network interface is in control
4122 */
4123 if (adapter->flags & FLAG_HAS_AMT)
4124 e1000e_get_hw_control(adapter);
4125
4126 ew32(WUC, 0);
4127
4128 if (mac->ops.init_hw(hw))
4129 e_err("Hardware Error\n");
4130
4131 e1000_update_mng_vlan(adapter);
4132
4133 /* Enable h/w to recognize an 802.1Q VLAN Ethernet packet */
4134 ew32(VET, ETH_P_8021Q);
4135
4136 e1000e_reset_adaptive(hw);
4137
4138 /* restore systim and hwtstamp settings */
4139 e1000e_systim_reset(adapter);
4140
4141 /* Set EEE advertisement as appropriate */
4142 if (adapter->flags2 & FLAG2_HAS_EEE) {
4143 s32 ret_val;
4144 u16 adv_addr;
4145
4146 switch (hw->phy.type) {
4147 case e1000_phy_82579:
4148 adv_addr = I82579_EEE_ADVERTISEMENT;
4149 break;
4150 case e1000_phy_i217:
4151 adv_addr = I217_EEE_ADVERTISEMENT;
4152 break;
4153 default:
4154 dev_err(&adapter->pdev->dev,
4155 "Invalid PHY type setting EEE advertisement\n");
4156 return;
4157 }
4158
4159 ret_val = hw->phy.ops.acquire(hw);
4160 if (ret_val) {
4161 dev_err(&adapter->pdev->dev,
4162 "EEE advertisement - unable to acquire PHY\n");
4163 return;
4164 }
4165
4166 e1000_write_emi_reg_locked(hw, adv_addr,
4167 hw->dev_spec.ich8lan.eee_disable ?
4168 0 : adapter->eee_advert);
4169
4170 hw->phy.ops.release(hw);
4171 }
4172
4173 if (!netif_running(adapter->netdev) &&
4174 !test_bit(__E1000_TESTING, &adapter->state))
4175 e1000_power_down_phy(adapter);
4176
4177 e1000_get_phy_info(hw);
4178
4179 if ((adapter->flags & FLAG_HAS_SMART_POWER_DOWN) &&
4180 !(adapter->flags & FLAG_SMART_POWER_DOWN)) {
4181 u16 phy_data = 0;
4182 /* speed up time to link by disabling smart power down, ignore
4183 * the return value of this function because there is nothing
4184 * different we would do if it failed
4185 */
4186 e1e_rphy(hw, IGP02E1000_PHY_POWER_MGMT, &phy_data);
4187 phy_data &= ~IGP02E1000_PM_SPD;
4188 e1e_wphy(hw, IGP02E1000_PHY_POWER_MGMT, phy_data);
4189 }
4190 if (hw->mac.type >= e1000_pch_spt && adapter->int_mode == 0) {
4191 u32 reg;
4192
4193 /* Fextnvm7 @ 0xe4[2] = 1 */
4194 reg = er32(FEXTNVM7);
4195 reg |= E1000_FEXTNVM7_SIDE_CLK_UNGATE;
4196 ew32(FEXTNVM7, reg);
4197 /* Fextnvm9 @ 0x5bb4[13:12] = 11 */
4198 reg = er32(FEXTNVM9);
4199 reg |= E1000_FEXTNVM9_IOSFSB_CLKGATE_DIS |
4200 E1000_FEXTNVM9_IOSFSB_CLKREQ_DIS;
4201 ew32(FEXTNVM9, reg);
4202 }
4203
4204}
4205
4206/**
4207 * e1000e_trigger_lsc - trigger an LSC interrupt
4208 * @adapter:
4209 *
4210 * Fire a link status change interrupt to start the watchdog.
4211 **/
4212static void e1000e_trigger_lsc(struct e1000_adapter *adapter)
4213{
4214 struct e1000_hw *hw = &adapter->hw;
4215
4216 if (adapter->msix_entries)
4217 ew32(ICS, E1000_ICS_LSC | E1000_ICS_OTHER);
4218 else
4219 ew32(ICS, E1000_ICS_LSC);
4220}
4221
4222void e1000e_up(struct e1000_adapter *adapter)
4223{
4224 /* hardware has been reset, we need to reload some things */
4225 e1000_configure(adapter);
4226
4227 clear_bit(__E1000_DOWN, &adapter->state);
4228
4229 if (adapter->msix_entries)
4230 e1000_configure_msix(adapter);
4231 e1000_irq_enable(adapter);
4232
4233 netif_start_queue(adapter->netdev);
4234
4235 e1000e_trigger_lsc(adapter);
4236}
4237
4238static void e1000e_flush_descriptors(struct e1000_adapter *adapter)
4239{
4240 struct e1000_hw *hw = &adapter->hw;
4241
4242 if (!(adapter->flags2 & FLAG2_DMA_BURST))
4243 return;
4244
4245 /* flush pending descriptor writebacks to memory */
4246 ew32(TIDV, adapter->tx_int_delay | E1000_TIDV_FPD);
4247 ew32(RDTR, adapter->rx_int_delay | E1000_RDTR_FPD);
4248
4249 /* execute the writes immediately */
4250 e1e_flush();
4251
4252 /* due to rare timing issues, write to TIDV/RDTR again to ensure the
4253 * write is successful
4254 */
4255 ew32(TIDV, adapter->tx_int_delay | E1000_TIDV_FPD);
4256 ew32(RDTR, adapter->rx_int_delay | E1000_RDTR_FPD);
4257
4258 /* execute the writes immediately */
4259 e1e_flush();
4260}
4261
4262static void e1000e_update_stats(struct e1000_adapter *adapter);
4263
4264/**
4265 * e1000e_down - quiesce the device and optionally reset the hardware
4266 * @adapter: board private structure
4267 * @reset: boolean flag to reset the hardware or not
4268 */
4269void e1000e_down(struct e1000_adapter *adapter, bool reset)
4270{
4271 struct net_device *netdev = adapter->netdev;
4272 struct e1000_hw *hw = &adapter->hw;
4273 u32 tctl, rctl;
4274
4275 /* signal that we're down so the interrupt handler does not
4276 * reschedule our watchdog timer
4277 */
4278 set_bit(__E1000_DOWN, &adapter->state);
4279
4280 netif_carrier_off(netdev);
4281
4282 /* disable receives in the hardware */
4283 rctl = er32(RCTL);
4284 if (!(adapter->flags2 & FLAG2_NO_DISABLE_RX))
4285 ew32(RCTL, rctl & ~E1000_RCTL_EN);
4286 /* flush and sleep below */
4287
4288 netif_stop_queue(netdev);
4289
4290 /* disable transmits in the hardware */
4291 tctl = er32(TCTL);
4292 tctl &= ~E1000_TCTL_EN;
4293 ew32(TCTL, tctl);
4294
4295 /* flush both disables and wait for them to finish */
4296 e1e_flush();
4297 usleep_range(10000, 20000);
4298
4299 e1000_irq_disable(adapter);
4300
4301 napi_synchronize(&adapter->napi);
4302
4303 del_timer_sync(&adapter->watchdog_timer);
4304 del_timer_sync(&adapter->phy_info_timer);
4305
4306 spin_lock(&adapter->stats64_lock);
4307 e1000e_update_stats(adapter);
4308 spin_unlock(&adapter->stats64_lock);
4309
4310 e1000e_flush_descriptors(adapter);
4311
4312 adapter->link_speed = 0;
4313 adapter->link_duplex = 0;
4314
4315 /* Disable Si errata workaround on PCHx for jumbo frame flow */
4316 if ((hw->mac.type >= e1000_pch2lan) &&
4317 (adapter->netdev->mtu > ETH_DATA_LEN) &&
4318 e1000_lv_jumbo_workaround_ich8lan(hw, false))
4319 e_dbg("failed to disable jumbo frame workaround mode\n");
4320
4321 if (!pci_channel_offline(adapter->pdev)) {
4322 if (reset)
4323 e1000e_reset(adapter);
4324 else if (hw->mac.type >= e1000_pch_spt)
4325 e1000_flush_desc_rings(adapter);
4326 }
4327 e1000_clean_tx_ring(adapter->tx_ring);
4328 e1000_clean_rx_ring(adapter->rx_ring);
4329}
4330
4331void e1000e_reinit_locked(struct e1000_adapter *adapter)
4332{
4333 might_sleep();
4334 while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
4335 usleep_range(1000, 2000);
4336 e1000e_down(adapter, true);
4337 e1000e_up(adapter);
4338 clear_bit(__E1000_RESETTING, &adapter->state);
4339}
4340
4341/**
4342 * e1000e_sanitize_systim - sanitize raw cycle counter reads
4343 * @hw: pointer to the HW structure
4344 * @systim: time value read, sanitized and returned
4345 *
4346 * Errata for 82574/82583 possible bad bits read from SYSTIMH/L:
4347 * check to see that the time is incrementing at a reasonable
4348 * rate and is a multiple of incvalue.
4349 **/
4350static u64 e1000e_sanitize_systim(struct e1000_hw *hw, u64 systim)
4351{
4352 u64 time_delta, rem, temp;
4353 u64 systim_next;
4354 u32 incvalue;
4355 int i;
4356
4357 incvalue = er32(TIMINCA) & E1000_TIMINCA_INCVALUE_MASK;
4358 for (i = 0; i < E1000_MAX_82574_SYSTIM_REREADS; i++) {
4359 /* latch SYSTIMH on read of SYSTIML */
4360 systim_next = (u64)er32(SYSTIML);
4361 systim_next |= (u64)er32(SYSTIMH) << 32;
4362
4363 time_delta = systim_next - systim;
4364 temp = time_delta;
4365 /* VMWare users have seen incvalue of zero, don't div / 0 */
4366 rem = incvalue ? do_div(temp, incvalue) : (time_delta != 0);
4367
4368 systim = systim_next;
4369
4370 if ((time_delta < E1000_82574_SYSTIM_EPSILON) && (rem == 0))
4371 break;
4372 }
4373
4374 return systim;
4375}
4376
4377/**
4378 * e1000e_cyclecounter_read - read raw cycle counter (used by time counter)
4379 * @cc: cyclecounter structure
4380 **/
4381static u64 e1000e_cyclecounter_read(const struct cyclecounter *cc)
4382{
4383 struct e1000_adapter *adapter = container_of(cc, struct e1000_adapter,
4384 cc);
4385 struct e1000_hw *hw = &adapter->hw;
4386 u32 systimel, systimeh;
4387 u64 systim;
4388 /* SYSTIMH latching upon SYSTIML read does not work well.
4389 * This means that if SYSTIML overflows after we read it but before
4390 * we read SYSTIMH, the value of SYSTIMH has been incremented and we
4391 * will experience a huge non linear increment in the systime value
4392 * to fix that we test for overflow and if true, we re-read systime.
4393 */
4394 systimel = er32(SYSTIML);
4395 systimeh = er32(SYSTIMH);
4396 /* Is systimel is so large that overflow is possible? */
4397 if (systimel >= (u32)0xffffffff - E1000_TIMINCA_INCVALUE_MASK) {
4398 u32 systimel_2 = er32(SYSTIML);
4399 if (systimel > systimel_2) {
4400 /* There was an overflow, read again SYSTIMH, and use
4401 * systimel_2
4402 */
4403 systimeh = er32(SYSTIMH);
4404 systimel = systimel_2;
4405 }
4406 }
4407 systim = (u64)systimel;
4408 systim |= (u64)systimeh << 32;
4409
4410 if (adapter->flags2 & FLAG2_CHECK_SYSTIM_OVERFLOW)
4411 systim = e1000e_sanitize_systim(hw, systim);
4412
4413 return systim;
4414}
4415
4416/**
4417 * e1000_sw_init - Initialize general software structures (struct e1000_adapter)
4418 * @adapter: board private structure to initialize
4419 *
4420 * e1000_sw_init initializes the Adapter private data structure.
4421 * Fields are initialized based on PCI device information and
4422 * OS network device settings (MTU size).
4423 **/
4424static int e1000_sw_init(struct e1000_adapter *adapter)
4425{
4426 struct net_device *netdev = adapter->netdev;
4427
4428 adapter->rx_buffer_len = VLAN_ETH_FRAME_LEN + ETH_FCS_LEN;
4429 adapter->rx_ps_bsize0 = 128;
4430 adapter->max_frame_size = netdev->mtu + VLAN_ETH_HLEN + ETH_FCS_LEN;
4431 adapter->min_frame_size = ETH_ZLEN + ETH_FCS_LEN;
4432 adapter->tx_ring_count = E1000_DEFAULT_TXD;
4433 adapter->rx_ring_count = E1000_DEFAULT_RXD;
4434
4435 spin_lock_init(&adapter->stats64_lock);
4436
4437 e1000e_set_interrupt_capability(adapter);
4438
4439 if (e1000_alloc_queues(adapter))
4440 return -ENOMEM;
4441
4442 /* Setup hardware time stamping cyclecounter */
4443 if (adapter->flags & FLAG_HAS_HW_TIMESTAMP) {
4444 adapter->cc.read = e1000e_cyclecounter_read;
4445 adapter->cc.mask = CYCLECOUNTER_MASK(64);
4446 adapter->cc.mult = 1;
4447 /* cc.shift set in e1000e_get_base_tininca() */
4448
4449 spin_lock_init(&adapter->systim_lock);
4450 INIT_WORK(&adapter->tx_hwtstamp_work, e1000e_tx_hwtstamp_work);
4451 }
4452
4453 /* Explicitly disable IRQ since the NIC can be in any state. */
4454 e1000_irq_disable(adapter);
4455
4456 set_bit(__E1000_DOWN, &adapter->state);
4457 return 0;
4458}
4459
4460/**
4461 * e1000_intr_msi_test - Interrupt Handler
4462 * @irq: interrupt number
4463 * @data: pointer to a network interface device structure
4464 **/
4465static irqreturn_t e1000_intr_msi_test(int __always_unused irq, void *data)
4466{
4467 struct net_device *netdev = data;
4468 struct e1000_adapter *adapter = netdev_priv(netdev);
4469 struct e1000_hw *hw = &adapter->hw;
4470 u32 icr = er32(ICR);
4471
4472 e_dbg("icr is %08X\n", icr);
4473 if (icr & E1000_ICR_RXSEQ) {
4474 adapter->flags &= ~FLAG_MSI_TEST_FAILED;
4475 /* Force memory writes to complete before acknowledging the
4476 * interrupt is handled.
4477 */
4478 wmb();
4479 }
4480
4481 return IRQ_HANDLED;
4482}
4483
4484/**
4485 * e1000_test_msi_interrupt - Returns 0 for successful test
4486 * @adapter: board private struct
4487 *
4488 * code flow taken from tg3.c
4489 **/
4490static int e1000_test_msi_interrupt(struct e1000_adapter *adapter)
4491{
4492 struct net_device *netdev = adapter->netdev;
4493 struct e1000_hw *hw = &adapter->hw;
4494 int err;
4495
4496 /* poll_enable hasn't been called yet, so don't need disable */
4497 /* clear any pending events */
4498 er32(ICR);
4499
4500 /* free the real vector and request a test handler */
4501 e1000_free_irq(adapter);
4502 e1000e_reset_interrupt_capability(adapter);
4503
4504 /* Assume that the test fails, if it succeeds then the test
4505 * MSI irq handler will unset this flag
4506 */
4507 adapter->flags |= FLAG_MSI_TEST_FAILED;
4508
4509 err = pci_enable_msi(adapter->pdev);
4510 if (err)
4511 goto msi_test_failed;
4512
4513 err = request_irq(adapter->pdev->irq, e1000_intr_msi_test, 0,
4514 netdev->name, netdev);
4515 if (err) {
4516 pci_disable_msi(adapter->pdev);
4517 goto msi_test_failed;
4518 }
4519
4520 /* Force memory writes to complete before enabling and firing an
4521 * interrupt.
4522 */
4523 wmb();
4524
4525 e1000_irq_enable(adapter);
4526
4527 /* fire an unusual interrupt on the test handler */
4528 ew32(ICS, E1000_ICS_RXSEQ);
4529 e1e_flush();
4530 msleep(100);
4531
4532 e1000_irq_disable(adapter);
4533
4534 rmb(); /* read flags after interrupt has been fired */
4535
4536 if (adapter->flags & FLAG_MSI_TEST_FAILED) {
4537 adapter->int_mode = E1000E_INT_MODE_LEGACY;
4538 e_info("MSI interrupt test failed, using legacy interrupt.\n");
4539 } else {
4540 e_dbg("MSI interrupt test succeeded!\n");
4541 }
4542
4543 free_irq(adapter->pdev->irq, netdev);
4544 pci_disable_msi(adapter->pdev);
4545
4546msi_test_failed:
4547 e1000e_set_interrupt_capability(adapter);
4548 return e1000_request_irq(adapter);
4549}
4550
4551/**
4552 * e1000_test_msi - Returns 0 if MSI test succeeds or INTx mode is restored
4553 * @adapter: board private struct
4554 *
4555 * code flow taken from tg3.c, called with e1000 interrupts disabled.
4556 **/
4557static int e1000_test_msi(struct e1000_adapter *adapter)
4558{
4559 int err;
4560 u16 pci_cmd;
4561
4562 if (!(adapter->flags & FLAG_MSI_ENABLED))
4563 return 0;
4564
4565 /* disable SERR in case the MSI write causes a master abort */
4566 pci_read_config_word(adapter->pdev, PCI_COMMAND, &pci_cmd);
4567 if (pci_cmd & PCI_COMMAND_SERR)
4568 pci_write_config_word(adapter->pdev, PCI_COMMAND,
4569 pci_cmd & ~PCI_COMMAND_SERR);
4570
4571 err = e1000_test_msi_interrupt(adapter);
4572
4573 /* re-enable SERR */
4574 if (pci_cmd & PCI_COMMAND_SERR) {
4575 pci_read_config_word(adapter->pdev, PCI_COMMAND, &pci_cmd);
4576 pci_cmd |= PCI_COMMAND_SERR;
4577 pci_write_config_word(adapter->pdev, PCI_COMMAND, pci_cmd);
4578 }
4579
4580 return err;
4581}
4582
4583/**
4584 * e1000e_open - Called when a network interface is made active
4585 * @netdev: network interface device structure
4586 *
4587 * Returns 0 on success, negative value on failure
4588 *
4589 * The open entry point is called when a network interface is made
4590 * active by the system (IFF_UP). At this point all resources needed
4591 * for transmit and receive operations are allocated, the interrupt
4592 * handler is registered with the OS, the watchdog timer is started,
4593 * and the stack is notified that the interface is ready.
4594 **/
4595int e1000e_open(struct net_device *netdev)
4596{
4597 struct e1000_adapter *adapter = netdev_priv(netdev);
4598 struct e1000_hw *hw = &adapter->hw;
4599 struct pci_dev *pdev = adapter->pdev;
4600 int err;
4601
4602 /* disallow open during test */
4603 if (test_bit(__E1000_TESTING, &adapter->state))
4604 return -EBUSY;
4605
4606 pm_runtime_get_sync(&pdev->dev);
4607
4608 netif_carrier_off(netdev);
4609
4610 /* allocate transmit descriptors */
4611 err = e1000e_setup_tx_resources(adapter->tx_ring);
4612 if (err)
4613 goto err_setup_tx;
4614
4615 /* allocate receive descriptors */
4616 err = e1000e_setup_rx_resources(adapter->rx_ring);
4617 if (err)
4618 goto err_setup_rx;
4619
4620 /* If AMT is enabled, let the firmware know that the network
4621 * interface is now open and reset the part to a known state.
4622 */
4623 if (adapter->flags & FLAG_HAS_AMT) {
4624 e1000e_get_hw_control(adapter);
4625 e1000e_reset(adapter);
4626 }
4627
4628 e1000e_power_up_phy(adapter);
4629
4630 adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
4631 if ((adapter->hw.mng_cookie.status & E1000_MNG_DHCP_COOKIE_STATUS_VLAN))
4632 e1000_update_mng_vlan(adapter);
4633
4634 /* DMA latency requirement to workaround jumbo issue */
4635 pm_qos_add_request(&adapter->pm_qos_req, PM_QOS_CPU_DMA_LATENCY,
4636 PM_QOS_DEFAULT_VALUE);
4637
4638 /* before we allocate an interrupt, we must be ready to handle it.
4639 * Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt
4640 * as soon as we call pci_request_irq, so we have to setup our
4641 * clean_rx handler before we do so.
4642 */
4643 e1000_configure(adapter);
4644
4645 err = e1000_request_irq(adapter);
4646 if (err)
4647 goto err_req_irq;
4648
4649 /* Work around PCIe errata with MSI interrupts causing some chipsets to
4650 * ignore e1000e MSI messages, which means we need to test our MSI
4651 * interrupt now
4652 */
4653 if (adapter->int_mode != E1000E_INT_MODE_LEGACY) {
4654 err = e1000_test_msi(adapter);
4655 if (err) {
4656 e_err("Interrupt allocation failed\n");
4657 goto err_req_irq;
4658 }
4659 }
4660
4661 /* From here on the code is the same as e1000e_up() */
4662 clear_bit(__E1000_DOWN, &adapter->state);
4663
4664 napi_enable(&adapter->napi);
4665
4666 e1000_irq_enable(adapter);
4667
4668 adapter->tx_hang_recheck = false;
4669 netif_start_queue(netdev);
4670
4671 hw->mac.get_link_status = true;
4672 pm_runtime_put(&pdev->dev);
4673
4674 e1000e_trigger_lsc(adapter);
4675
4676 return 0;
4677
4678err_req_irq:
4679 pm_qos_remove_request(&adapter->pm_qos_req);
4680 e1000e_release_hw_control(adapter);
4681 e1000_power_down_phy(adapter);
4682 e1000e_free_rx_resources(adapter->rx_ring);
4683err_setup_rx:
4684 e1000e_free_tx_resources(adapter->tx_ring);
4685err_setup_tx:
4686 e1000e_reset(adapter);
4687 pm_runtime_put_sync(&pdev->dev);
4688
4689 return err;
4690}
4691
4692/**
4693 * e1000e_close - Disables a network interface
4694 * @netdev: network interface device structure
4695 *
4696 * Returns 0, this is not allowed to fail
4697 *
4698 * The close entry point is called when an interface is de-activated
4699 * by the OS. The hardware is still under the drivers control, but
4700 * needs to be disabled. A global MAC reset is issued to stop the
4701 * hardware, and all transmit and receive resources are freed.
4702 **/
4703int e1000e_close(struct net_device *netdev)
4704{
4705 struct e1000_adapter *adapter = netdev_priv(netdev);
4706 struct pci_dev *pdev = adapter->pdev;
4707 int count = E1000_CHECK_RESET_COUNT;
4708
4709 while (test_bit(__E1000_RESETTING, &adapter->state) && count--)
4710 usleep_range(10000, 20000);
4711
4712 WARN_ON(test_bit(__E1000_RESETTING, &adapter->state));
4713
4714 pm_runtime_get_sync(&pdev->dev);
4715
4716 if (!test_bit(__E1000_DOWN, &adapter->state)) {
4717 e1000e_down(adapter, true);
4718 e1000_free_irq(adapter);
4719
4720 /* Link status message must follow this format */
4721 pr_info("%s NIC Link is Down\n", adapter->netdev->name);
4722 }
4723
4724 napi_disable(&adapter->napi);
4725
4726 e1000e_free_tx_resources(adapter->tx_ring);
4727 e1000e_free_rx_resources(adapter->rx_ring);
4728
4729 /* kill manageability vlan ID if supported, but not if a vlan with
4730 * the same ID is registered on the host OS (let 8021q kill it)
4731 */
4732 if (adapter->hw.mng_cookie.status & E1000_MNG_DHCP_COOKIE_STATUS_VLAN)
4733 e1000_vlan_rx_kill_vid(netdev, htons(ETH_P_8021Q),
4734 adapter->mng_vlan_id);
4735
4736 /* If AMT is enabled, let the firmware know that the network
4737 * interface is now closed
4738 */
4739 if ((adapter->flags & FLAG_HAS_AMT) &&
4740 !test_bit(__E1000_TESTING, &adapter->state))
4741 e1000e_release_hw_control(adapter);
4742
4743 pm_qos_remove_request(&adapter->pm_qos_req);
4744
4745 pm_runtime_put_sync(&pdev->dev);
4746
4747 return 0;
4748}
4749
4750/**
4751 * e1000_set_mac - Change the Ethernet Address of the NIC
4752 * @netdev: network interface device structure
4753 * @p: pointer to an address structure
4754 *
4755 * Returns 0 on success, negative on failure
4756 **/
4757static int e1000_set_mac(struct net_device *netdev, void *p)
4758{
4759 struct e1000_adapter *adapter = netdev_priv(netdev);
4760 struct e1000_hw *hw = &adapter->hw;
4761 struct sockaddr *addr = p;
4762
4763 if (!is_valid_ether_addr(addr->sa_data))
4764 return -EADDRNOTAVAIL;
4765
4766 memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
4767 memcpy(adapter->hw.mac.addr, addr->sa_data, netdev->addr_len);
4768
4769 hw->mac.ops.rar_set(&adapter->hw, adapter->hw.mac.addr, 0);
4770
4771 if (adapter->flags & FLAG_RESET_OVERWRITES_LAA) {
4772 /* activate the work around */
4773 e1000e_set_laa_state_82571(&adapter->hw, 1);
4774
4775 /* Hold a copy of the LAA in RAR[14] This is done so that
4776 * between the time RAR[0] gets clobbered and the time it
4777 * gets fixed (in e1000_watchdog), the actual LAA is in one
4778 * of the RARs and no incoming packets directed to this port
4779 * are dropped. Eventually the LAA will be in RAR[0] and
4780 * RAR[14]
4781 */
4782 hw->mac.ops.rar_set(&adapter->hw, adapter->hw.mac.addr,
4783 adapter->hw.mac.rar_entry_count - 1);
4784 }
4785
4786 return 0;
4787}
4788
4789/**
4790 * e1000e_update_phy_task - work thread to update phy
4791 * @work: pointer to our work struct
4792 *
4793 * this worker thread exists because we must acquire a
4794 * semaphore to read the phy, which we could msleep while
4795 * waiting for it, and we can't msleep in a timer.
4796 **/
4797static void e1000e_update_phy_task(struct work_struct *work)
4798{
4799 struct e1000_adapter *adapter = container_of(work,
4800 struct e1000_adapter,
4801 update_phy_task);
4802 struct e1000_hw *hw = &adapter->hw;
4803
4804 if (test_bit(__E1000_DOWN, &adapter->state))
4805 return;
4806
4807 e1000_get_phy_info(hw);
4808
4809 /* Enable EEE on 82579 after link up */
4810 if (hw->phy.type >= e1000_phy_82579)
4811 e1000_set_eee_pchlan(hw);
4812}
4813
4814/**
4815 * e1000_update_phy_info - timre call-back to update PHY info
4816 * @data: pointer to adapter cast into an unsigned long
4817 *
4818 * Need to wait a few seconds after link up to get diagnostic information from
4819 * the phy
4820 **/
4821static void e1000_update_phy_info(struct timer_list *t)
4822{
4823 struct e1000_adapter *adapter = from_timer(adapter, t, phy_info_timer);
4824
4825 if (test_bit(__E1000_DOWN, &adapter->state))
4826 return;
4827
4828 schedule_work(&adapter->update_phy_task);
4829}
4830
4831/**
4832 * e1000e_update_phy_stats - Update the PHY statistics counters
4833 * @adapter: board private structure
4834 *
4835 * Read/clear the upper 16-bit PHY registers and read/accumulate lower
4836 **/
4837static void e1000e_update_phy_stats(struct e1000_adapter *adapter)
4838{
4839 struct e1000_hw *hw = &adapter->hw;
4840 s32 ret_val;
4841 u16 phy_data;
4842
4843 ret_val = hw->phy.ops.acquire(hw);
4844 if (ret_val)
4845 return;
4846
4847 /* A page set is expensive so check if already on desired page.
4848 * If not, set to the page with the PHY status registers.
4849 */
4850 hw->phy.addr = 1;
4851 ret_val = e1000e_read_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT,
4852 &phy_data);
4853 if (ret_val)
4854 goto release;
4855 if (phy_data != (HV_STATS_PAGE << IGP_PAGE_SHIFT)) {
4856 ret_val = hw->phy.ops.set_page(hw,
4857 HV_STATS_PAGE << IGP_PAGE_SHIFT);
4858 if (ret_val)
4859 goto release;
4860 }
4861
4862 /* Single Collision Count */
4863 hw->phy.ops.read_reg_page(hw, HV_SCC_UPPER, &phy_data);
4864 ret_val = hw->phy.ops.read_reg_page(hw, HV_SCC_LOWER, &phy_data);
4865 if (!ret_val)
4866 adapter->stats.scc += phy_data;
4867
4868 /* Excessive Collision Count */
4869 hw->phy.ops.read_reg_page(hw, HV_ECOL_UPPER, &phy_data);
4870 ret_val = hw->phy.ops.read_reg_page(hw, HV_ECOL_LOWER, &phy_data);
4871 if (!ret_val)
4872 adapter->stats.ecol += phy_data;
4873
4874 /* Multiple Collision Count */
4875 hw->phy.ops.read_reg_page(hw, HV_MCC_UPPER, &phy_data);
4876 ret_val = hw->phy.ops.read_reg_page(hw, HV_MCC_LOWER, &phy_data);
4877 if (!ret_val)
4878 adapter->stats.mcc += phy_data;
4879
4880 /* Late Collision Count */
4881 hw->phy.ops.read_reg_page(hw, HV_LATECOL_UPPER, &phy_data);
4882 ret_val = hw->phy.ops.read_reg_page(hw, HV_LATECOL_LOWER, &phy_data);
4883 if (!ret_val)
4884 adapter->stats.latecol += phy_data;
4885
4886 /* Collision Count - also used for adaptive IFS */
4887 hw->phy.ops.read_reg_page(hw, HV_COLC_UPPER, &phy_data);
4888 ret_val = hw->phy.ops.read_reg_page(hw, HV_COLC_LOWER, &phy_data);
4889 if (!ret_val)
4890 hw->mac.collision_delta = phy_data;
4891
4892 /* Defer Count */
4893 hw->phy.ops.read_reg_page(hw, HV_DC_UPPER, &phy_data);
4894 ret_val = hw->phy.ops.read_reg_page(hw, HV_DC_LOWER, &phy_data);
4895 if (!ret_val)
4896 adapter->stats.dc += phy_data;
4897
4898 /* Transmit with no CRS */
4899 hw->phy.ops.read_reg_page(hw, HV_TNCRS_UPPER, &phy_data);
4900 ret_val = hw->phy.ops.read_reg_page(hw, HV_TNCRS_LOWER, &phy_data);
4901 if (!ret_val)
4902 adapter->stats.tncrs += phy_data;
4903
4904release:
4905 hw->phy.ops.release(hw);
4906}
4907
4908/**
4909 * e1000e_update_stats - Update the board statistics counters
4910 * @adapter: board private structure
4911 **/
4912static void e1000e_update_stats(struct e1000_adapter *adapter)
4913{
4914 struct net_device *netdev = adapter->netdev;
4915 struct e1000_hw *hw = &adapter->hw;
4916 struct pci_dev *pdev = adapter->pdev;
4917
4918 /* Prevent stats update while adapter is being reset, or if the pci
4919 * connection is down.
4920 */
4921 if (adapter->link_speed == 0)
4922 return;
4923 if (pci_channel_offline(pdev))
4924 return;
4925
4926 adapter->stats.crcerrs += er32(CRCERRS);
4927 adapter->stats.gprc += er32(GPRC);
4928 adapter->stats.gorc += er32(GORCL);
4929 er32(GORCH); /* Clear gorc */
4930 adapter->stats.bprc += er32(BPRC);
4931 adapter->stats.mprc += er32(MPRC);
4932 adapter->stats.roc += er32(ROC);
4933
4934 adapter->stats.mpc += er32(MPC);
4935
4936 /* Half-duplex statistics */
4937 if (adapter->link_duplex == HALF_DUPLEX) {
4938 if (adapter->flags2 & FLAG2_HAS_PHY_STATS) {
4939 e1000e_update_phy_stats(adapter);
4940 } else {
4941 adapter->stats.scc += er32(SCC);
4942 adapter->stats.ecol += er32(ECOL);
4943 adapter->stats.mcc += er32(MCC);
4944 adapter->stats.latecol += er32(LATECOL);
4945 adapter->stats.dc += er32(DC);
4946
4947 hw->mac.collision_delta = er32(COLC);
4948
4949 if ((hw->mac.type != e1000_82574) &&
4950 (hw->mac.type != e1000_82583))
4951 adapter->stats.tncrs += er32(TNCRS);
4952 }
4953 adapter->stats.colc += hw->mac.collision_delta;
4954 }
4955
4956 adapter->stats.xonrxc += er32(XONRXC);
4957 adapter->stats.xontxc += er32(XONTXC);
4958 adapter->stats.xoffrxc += er32(XOFFRXC);
4959 adapter->stats.xofftxc += er32(XOFFTXC);
4960 adapter->stats.gptc += er32(GPTC);
4961 adapter->stats.gotc += er32(GOTCL);
4962 er32(GOTCH); /* Clear gotc */
4963 adapter->stats.rnbc += er32(RNBC);
4964 adapter->stats.ruc += er32(RUC);
4965
4966 adapter->stats.mptc += er32(MPTC);
4967 adapter->stats.bptc += er32(BPTC);
4968
4969 /* used for adaptive IFS */
4970
4971 hw->mac.tx_packet_delta = er32(TPT);
4972 adapter->stats.tpt += hw->mac.tx_packet_delta;
4973
4974 adapter->stats.algnerrc += er32(ALGNERRC);
4975 adapter->stats.rxerrc += er32(RXERRC);
4976 adapter->stats.cexterr += er32(CEXTERR);
4977 adapter->stats.tsctc += er32(TSCTC);
4978 adapter->stats.tsctfc += er32(TSCTFC);
4979
4980 /* Fill out the OS statistics structure */
4981 netdev->stats.multicast = adapter->stats.mprc;
4982 netdev->stats.collisions = adapter->stats.colc;
4983
4984 /* Rx Errors */
4985
4986 /* RLEC on some newer hardware can be incorrect so build
4987 * our own version based on RUC and ROC
4988 */
4989 netdev->stats.rx_errors = adapter->stats.rxerrc +
4990 adapter->stats.crcerrs + adapter->stats.algnerrc +
4991 adapter->stats.ruc + adapter->stats.roc + adapter->stats.cexterr;
4992 netdev->stats.rx_length_errors = adapter->stats.ruc +
4993 adapter->stats.roc;
4994 netdev->stats.rx_crc_errors = adapter->stats.crcerrs;
4995 netdev->stats.rx_frame_errors = adapter->stats.algnerrc;
4996 netdev->stats.rx_missed_errors = adapter->stats.mpc;
4997
4998 /* Tx Errors */
4999 netdev->stats.tx_errors = adapter->stats.ecol + adapter->stats.latecol;
5000 netdev->stats.tx_aborted_errors = adapter->stats.ecol;
5001 netdev->stats.tx_window_errors = adapter->stats.latecol;
5002 netdev->stats.tx_carrier_errors = adapter->stats.tncrs;
5003
5004 /* Tx Dropped needs to be maintained elsewhere */
5005
5006 /* Management Stats */
5007 adapter->stats.mgptc += er32(MGTPTC);
5008 adapter->stats.mgprc += er32(MGTPRC);
5009 adapter->stats.mgpdc += er32(MGTPDC);
5010
5011 /* Correctable ECC Errors */
5012 if (hw->mac.type >= e1000_pch_lpt) {
5013 u32 pbeccsts = er32(PBECCSTS);
5014
5015 adapter->corr_errors +=
5016 pbeccsts & E1000_PBECCSTS_CORR_ERR_CNT_MASK;
5017 adapter->uncorr_errors +=
5018 (pbeccsts & E1000_PBECCSTS_UNCORR_ERR_CNT_MASK) >>
5019 E1000_PBECCSTS_UNCORR_ERR_CNT_SHIFT;
5020 }
5021}
5022
5023/**
5024 * e1000_phy_read_status - Update the PHY register status snapshot
5025 * @adapter: board private structure
5026 **/
5027static void e1000_phy_read_status(struct e1000_adapter *adapter)
5028{
5029 struct e1000_hw *hw = &adapter->hw;
5030 struct e1000_phy_regs *phy = &adapter->phy_regs;
5031
5032 if (!pm_runtime_suspended((&adapter->pdev->dev)->parent) &&
5033 (er32(STATUS) & E1000_STATUS_LU) &&
5034 (adapter->hw.phy.media_type == e1000_media_type_copper)) {
5035 int ret_val;
5036
5037 ret_val = e1e_rphy(hw, MII_BMCR, &phy->bmcr);
5038 ret_val |= e1e_rphy(hw, MII_BMSR, &phy->bmsr);
5039 ret_val |= e1e_rphy(hw, MII_ADVERTISE, &phy->advertise);
5040 ret_val |= e1e_rphy(hw, MII_LPA, &phy->lpa);
5041 ret_val |= e1e_rphy(hw, MII_EXPANSION, &phy->expansion);
5042 ret_val |= e1e_rphy(hw, MII_CTRL1000, &phy->ctrl1000);
5043 ret_val |= e1e_rphy(hw, MII_STAT1000, &phy->stat1000);
5044 ret_val |= e1e_rphy(hw, MII_ESTATUS, &phy->estatus);
5045 if (ret_val)
5046 e_warn("Error reading PHY register\n");
5047 } else {
5048 /* Do not read PHY registers if link is not up
5049 * Set values to typical power-on defaults
5050 */
5051 phy->bmcr = (BMCR_SPEED1000 | BMCR_ANENABLE | BMCR_FULLDPLX);
5052 phy->bmsr = (BMSR_100FULL | BMSR_100HALF | BMSR_10FULL |
5053 BMSR_10HALF | BMSR_ESTATEN | BMSR_ANEGCAPABLE |
5054 BMSR_ERCAP);
5055 phy->advertise = (ADVERTISE_PAUSE_ASYM | ADVERTISE_PAUSE_CAP |
5056 ADVERTISE_ALL | ADVERTISE_CSMA);
5057 phy->lpa = 0;
5058 phy->expansion = EXPANSION_ENABLENPAGE;
5059 phy->ctrl1000 = ADVERTISE_1000FULL;
5060 phy->stat1000 = 0;
5061 phy->estatus = (ESTATUS_1000_TFULL | ESTATUS_1000_THALF);
5062 }
5063}
5064
5065static void e1000_print_link_info(struct e1000_adapter *adapter)
5066{
5067 struct e1000_hw *hw = &adapter->hw;
5068 u32 ctrl = er32(CTRL);
5069
5070 /* Link status message must follow this format for user tools */
5071 pr_info("%s NIC Link is Up %d Mbps %s Duplex, Flow Control: %s\n",
5072 adapter->netdev->name, adapter->link_speed,
5073 adapter->link_duplex == FULL_DUPLEX ? "Full" : "Half",
5074 (ctrl & E1000_CTRL_TFCE) && (ctrl & E1000_CTRL_RFCE) ? "Rx/Tx" :
5075 (ctrl & E1000_CTRL_RFCE) ? "Rx" :
5076 (ctrl & E1000_CTRL_TFCE) ? "Tx" : "None");
5077}
5078
5079static bool e1000e_has_link(struct e1000_adapter *adapter)
5080{
5081 struct e1000_hw *hw = &adapter->hw;
5082 bool link_active = false;
5083 s32 ret_val = 0;
5084
5085 /* get_link_status is set on LSC (link status) interrupt or
5086 * Rx sequence error interrupt. get_link_status will stay
5087 * true until the check_for_link establishes link
5088 * for copper adapters ONLY
5089 */
5090 switch (hw->phy.media_type) {
5091 case e1000_media_type_copper:
5092 if (hw->mac.get_link_status) {
5093 ret_val = hw->mac.ops.check_for_link(hw);
5094 link_active = !hw->mac.get_link_status;
5095 } else {
5096 link_active = true;
5097 }
5098 break;
5099 case e1000_media_type_fiber:
5100 ret_val = hw->mac.ops.check_for_link(hw);
5101 link_active = !!(er32(STATUS) & E1000_STATUS_LU);
5102 break;
5103 case e1000_media_type_internal_serdes:
5104 ret_val = hw->mac.ops.check_for_link(hw);
5105 link_active = hw->mac.serdes_has_link;
5106 break;
5107 default:
5108 case e1000_media_type_unknown:
5109 break;
5110 }
5111
5112 if ((ret_val == -E1000_ERR_PHY) && (hw->phy.type == e1000_phy_igp_3) &&
5113 (er32(CTRL) & E1000_PHY_CTRL_GBE_DISABLE)) {
5114 /* See e1000_kmrn_lock_loss_workaround_ich8lan() */
5115 e_info("Gigabit has been disabled, downgrading speed\n");
5116 }
5117
5118 return link_active;
5119}
5120
5121static void e1000e_enable_receives(struct e1000_adapter *adapter)
5122{
5123 /* make sure the receive unit is started */
5124 if ((adapter->flags & FLAG_RX_NEEDS_RESTART) &&
5125 (adapter->flags & FLAG_RESTART_NOW)) {
5126 struct e1000_hw *hw = &adapter->hw;
5127 u32 rctl = er32(RCTL);
5128
5129 ew32(RCTL, rctl | E1000_RCTL_EN);
5130 adapter->flags &= ~FLAG_RESTART_NOW;
5131 }
5132}
5133
5134static void e1000e_check_82574_phy_workaround(struct e1000_adapter *adapter)
5135{
5136 struct e1000_hw *hw = &adapter->hw;
5137
5138 /* With 82574 controllers, PHY needs to be checked periodically
5139 * for hung state and reset, if two calls return true
5140 */
5141 if (e1000_check_phy_82574(hw))
5142 adapter->phy_hang_count++;
5143 else
5144 adapter->phy_hang_count = 0;
5145
5146 if (adapter->phy_hang_count > 1) {
5147 adapter->phy_hang_count = 0;
5148 e_dbg("PHY appears hung - resetting\n");
5149 schedule_work(&adapter->reset_task);
5150 }
5151}
5152
5153/**
5154 * e1000_watchdog - Timer Call-back
5155 * @data: pointer to adapter cast into an unsigned long
5156 **/
5157static void e1000_watchdog(struct timer_list *t)
5158{
5159 struct e1000_adapter *adapter = from_timer(adapter, t, watchdog_timer);
5160
5161 /* Do the rest outside of interrupt context */
5162 schedule_work(&adapter->watchdog_task);
5163
5164 /* TODO: make this use queue_delayed_work() */
5165}
5166
5167static void e1000_watchdog_task(struct work_struct *work)
5168{
5169 struct e1000_adapter *adapter = container_of(work,
5170 struct e1000_adapter,
5171 watchdog_task);
5172 struct net_device *netdev = adapter->netdev;
5173 struct e1000_mac_info *mac = &adapter->hw.mac;
5174 struct e1000_phy_info *phy = &adapter->hw.phy;
5175 struct e1000_ring *tx_ring = adapter->tx_ring;
5176 struct e1000_hw *hw = &adapter->hw;
5177 u32 link, tctl;
5178
5179 if (test_bit(__E1000_DOWN, &adapter->state))
5180 return;
5181
5182 link = e1000e_has_link(adapter);
5183 if ((netif_carrier_ok(netdev)) && link) {
5184 /* Cancel scheduled suspend requests. */
5185 pm_runtime_resume(netdev->dev.parent);
5186
5187 e1000e_enable_receives(adapter);
5188 goto link_up;
5189 }
5190
5191 if ((e1000e_enable_tx_pkt_filtering(hw)) &&
5192 (adapter->mng_vlan_id != adapter->hw.mng_cookie.vlan_id))
5193 e1000_update_mng_vlan(adapter);
5194
5195 if (link) {
5196 if (!netif_carrier_ok(netdev)) {
5197 bool txb2b = true;
5198
5199 /* Cancel scheduled suspend requests. */
5200 pm_runtime_resume(netdev->dev.parent);
5201
5202 /* update snapshot of PHY registers on LSC */
5203 e1000_phy_read_status(adapter);
5204 mac->ops.get_link_up_info(&adapter->hw,
5205 &adapter->link_speed,
5206 &adapter->link_duplex);
5207 e1000_print_link_info(adapter);
5208
5209 /* check if SmartSpeed worked */
5210 e1000e_check_downshift(hw);
5211 if (phy->speed_downgraded)
5212 netdev_warn(netdev,
5213 "Link Speed was downgraded by SmartSpeed\n");
5214
5215 /* On supported PHYs, check for duplex mismatch only
5216 * if link has autonegotiated at 10/100 half
5217 */
5218 if ((hw->phy.type == e1000_phy_igp_3 ||
5219 hw->phy.type == e1000_phy_bm) &&
5220 hw->mac.autoneg &&
5221 (adapter->link_speed == SPEED_10 ||
5222 adapter->link_speed == SPEED_100) &&
5223 (adapter->link_duplex == HALF_DUPLEX)) {
5224 u16 autoneg_exp;
5225
5226 e1e_rphy(hw, MII_EXPANSION, &autoneg_exp);
5227
5228 if (!(autoneg_exp & EXPANSION_NWAY))
5229 e_info("Autonegotiated half duplex but link partner cannot autoneg. Try forcing full duplex if link gets many collisions.\n");
5230 }
5231
5232 /* adjust timeout factor according to speed/duplex */
5233 adapter->tx_timeout_factor = 1;
5234 switch (adapter->link_speed) {
5235 case SPEED_10:
5236 txb2b = false;
5237 adapter->tx_timeout_factor = 16;
5238 break;
5239 case SPEED_100:
5240 txb2b = false;
5241 adapter->tx_timeout_factor = 10;
5242 break;
5243 }
5244
5245 /* workaround: re-program speed mode bit after
5246 * link-up event
5247 */
5248 if ((adapter->flags & FLAG_TARC_SPEED_MODE_BIT) &&
5249 !txb2b) {
5250 u32 tarc0;
5251
5252 tarc0 = er32(TARC(0));
5253 tarc0 &= ~SPEED_MODE_BIT;
5254 ew32(TARC(0), tarc0);
5255 }
5256
5257 /* disable TSO for pcie and 10/100 speeds, to avoid
5258 * some hardware issues
5259 */
5260 if (!(adapter->flags & FLAG_TSO_FORCE)) {
5261 switch (adapter->link_speed) {
5262 case SPEED_10:
5263 case SPEED_100:
5264 e_info("10/100 speed: disabling TSO\n");
5265 netdev->features &= ~NETIF_F_TSO;
5266 netdev->features &= ~NETIF_F_TSO6;
5267 break;
5268 case SPEED_1000:
5269 netdev->features |= NETIF_F_TSO;
5270 netdev->features |= NETIF_F_TSO6;
5271 break;
5272 default:
5273 /* oops */
5274 break;
5275 }
5276 }
5277
5278 /* enable transmits in the hardware, need to do this
5279 * after setting TARC(0)
5280 */
5281 tctl = er32(TCTL);
5282 tctl |= E1000_TCTL_EN;
5283 ew32(TCTL, tctl);
5284
5285 /* Perform any post-link-up configuration before
5286 * reporting link up.
5287 */
5288 if (phy->ops.cfg_on_link_up)
5289 phy->ops.cfg_on_link_up(hw);
5290
5291 netif_carrier_on(netdev);
5292
5293 if (!test_bit(__E1000_DOWN, &adapter->state))
5294 mod_timer(&adapter->phy_info_timer,
5295 round_jiffies(jiffies + 2 * HZ));
5296 }
5297 } else {
5298 if (netif_carrier_ok(netdev)) {
5299 adapter->link_speed = 0;
5300 adapter->link_duplex = 0;
5301 /* Link status message must follow this format */
5302 pr_info("%s NIC Link is Down\n", adapter->netdev->name);
5303 netif_carrier_off(netdev);
5304 if (!test_bit(__E1000_DOWN, &adapter->state))
5305 mod_timer(&adapter->phy_info_timer,
5306 round_jiffies(jiffies + 2 * HZ));
5307
5308 /* 8000ES2LAN requires a Rx packet buffer work-around
5309 * on link down event; reset the controller to flush
5310 * the Rx packet buffer.
5311 */
5312 if (adapter->flags & FLAG_RX_NEEDS_RESTART)
5313 adapter->flags |= FLAG_RESTART_NOW;
5314 else
5315 pm_schedule_suspend(netdev->dev.parent,
5316 LINK_TIMEOUT);
5317 }
5318 }
5319
5320link_up:
5321 spin_lock(&adapter->stats64_lock);
5322 e1000e_update_stats(adapter);
5323
5324 mac->tx_packet_delta = adapter->stats.tpt - adapter->tpt_old;
5325 adapter->tpt_old = adapter->stats.tpt;
5326 mac->collision_delta = adapter->stats.colc - adapter->colc_old;
5327 adapter->colc_old = adapter->stats.colc;
5328
5329 adapter->gorc = adapter->stats.gorc - adapter->gorc_old;
5330 adapter->gorc_old = adapter->stats.gorc;
5331 adapter->gotc = adapter->stats.gotc - adapter->gotc_old;
5332 adapter->gotc_old = adapter->stats.gotc;
5333 spin_unlock(&adapter->stats64_lock);
5334
5335 /* If the link is lost the controller stops DMA, but
5336 * if there is queued Tx work it cannot be done. So
5337 * reset the controller to flush the Tx packet buffers.
5338 */
5339 if (!netif_carrier_ok(netdev) &&
5340 (e1000_desc_unused(tx_ring) + 1 < tx_ring->count))
5341 adapter->flags |= FLAG_RESTART_NOW;
5342
5343 /* If reset is necessary, do it outside of interrupt context. */
5344 if (adapter->flags & FLAG_RESTART_NOW) {
5345 schedule_work(&adapter->reset_task);
5346 /* return immediately since reset is imminent */
5347 return;
5348 }
5349
5350 e1000e_update_adaptive(&adapter->hw);
5351
5352 /* Simple mode for Interrupt Throttle Rate (ITR) */
5353 if (adapter->itr_setting == 4) {
5354 /* Symmetric Tx/Rx gets a reduced ITR=2000;
5355 * Total asymmetrical Tx or Rx gets ITR=8000;
5356 * everyone else is between 2000-8000.
5357 */
5358 u32 goc = (adapter->gotc + adapter->gorc) / 10000;
5359 u32 dif = (adapter->gotc > adapter->gorc ?
5360 adapter->gotc - adapter->gorc :
5361 adapter->gorc - adapter->gotc) / 10000;
5362 u32 itr = goc > 0 ? (dif * 6000 / goc + 2000) : 8000;
5363
5364 e1000e_write_itr(adapter, itr);
5365 }
5366
5367 /* Cause software interrupt to ensure Rx ring is cleaned */
5368 if (adapter->msix_entries)
5369 ew32(ICS, adapter->rx_ring->ims_val);
5370 else
5371 ew32(ICS, E1000_ICS_RXDMT0);
5372
5373 /* flush pending descriptors to memory before detecting Tx hang */
5374 e1000e_flush_descriptors(adapter);
5375
5376 /* Force detection of hung controller every watchdog period */
5377 adapter->detect_tx_hung = true;
5378
5379 /* With 82571 controllers, LAA may be overwritten due to controller
5380 * reset from the other port. Set the appropriate LAA in RAR[0]
5381 */
5382 if (e1000e_get_laa_state_82571(hw))
5383 hw->mac.ops.rar_set(hw, adapter->hw.mac.addr, 0);
5384
5385 if (adapter->flags2 & FLAG2_CHECK_PHY_HANG)
5386 e1000e_check_82574_phy_workaround(adapter);
5387
5388 /* Clear valid timestamp stuck in RXSTMPL/H due to a Rx error */
5389 if (adapter->hwtstamp_config.rx_filter != HWTSTAMP_FILTER_NONE) {
5390 if ((adapter->flags2 & FLAG2_CHECK_RX_HWTSTAMP) &&
5391 (er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_VALID)) {
5392 er32(RXSTMPH);
5393 adapter->rx_hwtstamp_cleared++;
5394 } else {
5395 adapter->flags2 |= FLAG2_CHECK_RX_HWTSTAMP;
5396 }
5397 }
5398
5399 /* Reset the timer */
5400 if (!test_bit(__E1000_DOWN, &adapter->state))
5401 mod_timer(&adapter->watchdog_timer,
5402 round_jiffies(jiffies + 2 * HZ));
5403}
5404
5405#define E1000_TX_FLAGS_CSUM 0x00000001
5406#define E1000_TX_FLAGS_VLAN 0x00000002
5407#define E1000_TX_FLAGS_TSO 0x00000004
5408#define E1000_TX_FLAGS_IPV4 0x00000008
5409#define E1000_TX_FLAGS_NO_FCS 0x00000010
5410#define E1000_TX_FLAGS_HWTSTAMP 0x00000020
5411#define E1000_TX_FLAGS_VLAN_MASK 0xffff0000
5412#define E1000_TX_FLAGS_VLAN_SHIFT 16
5413
5414static int e1000_tso(struct e1000_ring *tx_ring, struct sk_buff *skb,
5415 __be16 protocol)
5416{
5417 struct e1000_context_desc *context_desc;
5418 struct e1000_buffer *buffer_info;
5419 unsigned int i;
5420 u32 cmd_length = 0;
5421 u16 ipcse = 0, mss;
5422 u8 ipcss, ipcso, tucss, tucso, hdr_len;
5423 int err;
5424
5425 if (!skb_is_gso(skb))
5426 return 0;
5427
5428 err = skb_cow_head(skb, 0);
5429 if (err < 0)
5430 return err;
5431
5432 hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
5433 mss = skb_shinfo(skb)->gso_size;
5434 if (protocol == htons(ETH_P_IP)) {
5435 struct iphdr *iph = ip_hdr(skb);
5436 iph->tot_len = 0;
5437 iph->check = 0;
5438 tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr, iph->daddr,
5439 0, IPPROTO_TCP, 0);
5440 cmd_length = E1000_TXD_CMD_IP;
5441 ipcse = skb_transport_offset(skb) - 1;
5442 } else if (skb_is_gso_v6(skb)) {
5443 ipv6_hdr(skb)->payload_len = 0;
5444 tcp_hdr(skb)->check = ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
5445 &ipv6_hdr(skb)->daddr,
5446 0, IPPROTO_TCP, 0);
5447 ipcse = 0;
5448 }
5449 ipcss = skb_network_offset(skb);
5450 ipcso = (void *)&(ip_hdr(skb)->check) - (void *)skb->data;
5451 tucss = skb_transport_offset(skb);
5452 tucso = (void *)&(tcp_hdr(skb)->check) - (void *)skb->data;
5453
5454 cmd_length |= (E1000_TXD_CMD_DEXT | E1000_TXD_CMD_TSE |
5455 E1000_TXD_CMD_TCP | (skb->len - (hdr_len)));
5456
5457 i = tx_ring->next_to_use;
5458 context_desc = E1000_CONTEXT_DESC(*tx_ring, i);
5459 buffer_info = &tx_ring->buffer_info[i];
5460
5461 context_desc->lower_setup.ip_fields.ipcss = ipcss;
5462 context_desc->lower_setup.ip_fields.ipcso = ipcso;
5463 context_desc->lower_setup.ip_fields.ipcse = cpu_to_le16(ipcse);
5464 context_desc->upper_setup.tcp_fields.tucss = tucss;
5465 context_desc->upper_setup.tcp_fields.tucso = tucso;
5466 context_desc->upper_setup.tcp_fields.tucse = 0;
5467 context_desc->tcp_seg_setup.fields.mss = cpu_to_le16(mss);
5468 context_desc->tcp_seg_setup.fields.hdr_len = hdr_len;
5469 context_desc->cmd_and_length = cpu_to_le32(cmd_length);
5470
5471 buffer_info->time_stamp = jiffies;
5472 buffer_info->next_to_watch = i;
5473
5474 i++;
5475 if (i == tx_ring->count)
5476 i = 0;
5477 tx_ring->next_to_use = i;
5478
5479 return 1;
5480}
5481
5482static bool e1000_tx_csum(struct e1000_ring *tx_ring, struct sk_buff *skb,
5483 __be16 protocol)
5484{
5485 struct e1000_adapter *adapter = tx_ring->adapter;
5486 struct e1000_context_desc *context_desc;
5487 struct e1000_buffer *buffer_info;
5488 unsigned int i;
5489 u8 css;
5490 u32 cmd_len = E1000_TXD_CMD_DEXT;
5491
5492 if (skb->ip_summed != CHECKSUM_PARTIAL)
5493 return false;
5494
5495 switch (protocol) {
5496 case cpu_to_be16(ETH_P_IP):
5497 if (ip_hdr(skb)->protocol == IPPROTO_TCP)
5498 cmd_len |= E1000_TXD_CMD_TCP;
5499 break;
5500 case cpu_to_be16(ETH_P_IPV6):
5501 /* XXX not handling all IPV6 headers */
5502 if (ipv6_hdr(skb)->nexthdr == IPPROTO_TCP)
5503 cmd_len |= E1000_TXD_CMD_TCP;
5504 break;
5505 default:
5506 if (unlikely(net_ratelimit()))
5507 e_warn("checksum_partial proto=%x!\n",
5508 be16_to_cpu(protocol));
5509 break;
5510 }
5511
5512 css = skb_checksum_start_offset(skb);
5513
5514 i = tx_ring->next_to_use;
5515 buffer_info = &tx_ring->buffer_info[i];
5516 context_desc = E1000_CONTEXT_DESC(*tx_ring, i);
5517
5518 context_desc->lower_setup.ip_config = 0;
5519 context_desc->upper_setup.tcp_fields.tucss = css;
5520 context_desc->upper_setup.tcp_fields.tucso = css + skb->csum_offset;
5521 context_desc->upper_setup.tcp_fields.tucse = 0;
5522 context_desc->tcp_seg_setup.data = 0;
5523 context_desc->cmd_and_length = cpu_to_le32(cmd_len);
5524
5525 buffer_info->time_stamp = jiffies;
5526 buffer_info->next_to_watch = i;
5527
5528 i++;
5529 if (i == tx_ring->count)
5530 i = 0;
5531 tx_ring->next_to_use = i;
5532
5533 return true;
5534}
5535
5536static int e1000_tx_map(struct e1000_ring *tx_ring, struct sk_buff *skb,
5537 unsigned int first, unsigned int max_per_txd,
5538 unsigned int nr_frags)
5539{
5540 struct e1000_adapter *adapter = tx_ring->adapter;
5541 struct pci_dev *pdev = adapter->pdev;
5542 struct e1000_buffer *buffer_info;
5543 unsigned int len = skb_headlen(skb);
5544 unsigned int offset = 0, size, count = 0, i;
5545 unsigned int f, bytecount, segs;
5546
5547 i = tx_ring->next_to_use;
5548
5549 while (len) {
5550 buffer_info = &tx_ring->buffer_info[i];
5551 size = min(len, max_per_txd);
5552
5553 buffer_info->length = size;
5554 buffer_info->time_stamp = jiffies;
5555 buffer_info->next_to_watch = i;
5556 buffer_info->dma = dma_map_single(&pdev->dev,
5557 skb->data + offset,
5558 size, DMA_TO_DEVICE);
5559 buffer_info->mapped_as_page = false;
5560 if (dma_mapping_error(&pdev->dev, buffer_info->dma))
5561 goto dma_error;
5562
5563 len -= size;
5564 offset += size;
5565 count++;
5566
5567 if (len) {
5568 i++;
5569 if (i == tx_ring->count)
5570 i = 0;
5571 }
5572 }
5573
5574 for (f = 0; f < nr_frags; f++) {
5575 const struct skb_frag_struct *frag;
5576
5577 frag = &skb_shinfo(skb)->frags[f];
5578 len = skb_frag_size(frag);
5579 offset = 0;
5580
5581 while (len) {
5582 i++;
5583 if (i == tx_ring->count)
5584 i = 0;
5585
5586 buffer_info = &tx_ring->buffer_info[i];
5587 size = min(len, max_per_txd);
5588
5589 buffer_info->length = size;
5590 buffer_info->time_stamp = jiffies;
5591 buffer_info->next_to_watch = i;
5592 buffer_info->dma = skb_frag_dma_map(&pdev->dev, frag,
5593 offset, size,
5594 DMA_TO_DEVICE);
5595 buffer_info->mapped_as_page = true;
5596 if (dma_mapping_error(&pdev->dev, buffer_info->dma))
5597 goto dma_error;
5598
5599 len -= size;
5600 offset += size;
5601 count++;
5602 }
5603 }
5604
5605 segs = skb_shinfo(skb)->gso_segs ? : 1;
5606 /* multiply data chunks by size of headers */
5607 bytecount = ((segs - 1) * skb_headlen(skb)) + skb->len;
5608
5609 tx_ring->buffer_info[i].skb = skb;
5610 tx_ring->buffer_info[i].segs = segs;
5611 tx_ring->buffer_info[i].bytecount = bytecount;
5612 tx_ring->buffer_info[first].next_to_watch = i;
5613
5614 return count;
5615
5616dma_error:
5617 dev_err(&pdev->dev, "Tx DMA map failed\n");
5618 buffer_info->dma = 0;
5619 if (count)
5620 count--;
5621
5622 while (count--) {
5623 if (i == 0)
5624 i += tx_ring->count;
5625 i--;
5626 buffer_info = &tx_ring->buffer_info[i];
5627 e1000_put_txbuf(tx_ring, buffer_info, true);
5628 }
5629
5630 return 0;
5631}
5632
5633static void e1000_tx_queue(struct e1000_ring *tx_ring, int tx_flags, int count)
5634{
5635 struct e1000_adapter *adapter = tx_ring->adapter;
5636 struct e1000_tx_desc *tx_desc = NULL;
5637 struct e1000_buffer *buffer_info;
5638 u32 txd_upper = 0, txd_lower = E1000_TXD_CMD_IFCS;
5639 unsigned int i;
5640
5641 if (tx_flags & E1000_TX_FLAGS_TSO) {
5642 txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D |
5643 E1000_TXD_CMD_TSE;
5644 txd_upper |= E1000_TXD_POPTS_TXSM << 8;
5645
5646 if (tx_flags & E1000_TX_FLAGS_IPV4)
5647 txd_upper |= E1000_TXD_POPTS_IXSM << 8;
5648 }
5649
5650 if (tx_flags & E1000_TX_FLAGS_CSUM) {
5651 txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D;
5652 txd_upper |= E1000_TXD_POPTS_TXSM << 8;
5653 }
5654
5655 if (tx_flags & E1000_TX_FLAGS_VLAN) {
5656 txd_lower |= E1000_TXD_CMD_VLE;
5657 txd_upper |= (tx_flags & E1000_TX_FLAGS_VLAN_MASK);
5658 }
5659
5660 if (unlikely(tx_flags & E1000_TX_FLAGS_NO_FCS))
5661 txd_lower &= ~(E1000_TXD_CMD_IFCS);
5662
5663 if (unlikely(tx_flags & E1000_TX_FLAGS_HWTSTAMP)) {
5664 txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D;
5665 txd_upper |= E1000_TXD_EXTCMD_TSTAMP;
5666 }
5667
5668 i = tx_ring->next_to_use;
5669
5670 do {
5671 buffer_info = &tx_ring->buffer_info[i];
5672 tx_desc = E1000_TX_DESC(*tx_ring, i);
5673 tx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
5674 tx_desc->lower.data = cpu_to_le32(txd_lower |
5675 buffer_info->length);
5676 tx_desc->upper.data = cpu_to_le32(txd_upper);
5677
5678 i++;
5679 if (i == tx_ring->count)
5680 i = 0;
5681 } while (--count > 0);
5682
5683 tx_desc->lower.data |= cpu_to_le32(adapter->txd_cmd);
5684
5685 /* txd_cmd re-enables FCS, so we'll re-disable it here as desired. */
5686 if (unlikely(tx_flags & E1000_TX_FLAGS_NO_FCS))
5687 tx_desc->lower.data &= ~(cpu_to_le32(E1000_TXD_CMD_IFCS));
5688
5689 /* Force memory writes to complete before letting h/w
5690 * know there are new descriptors to fetch. (Only
5691 * applicable for weak-ordered memory model archs,
5692 * such as IA-64).
5693 */
5694 wmb();
5695
5696 tx_ring->next_to_use = i;
5697}
5698
5699#define MINIMUM_DHCP_PACKET_SIZE 282
5700static int e1000_transfer_dhcp_info(struct e1000_adapter *adapter,
5701 struct sk_buff *skb)
5702{
5703 struct e1000_hw *hw = &adapter->hw;
5704 u16 length, offset;
5705
5706 if (skb_vlan_tag_present(skb) &&
5707 !((skb_vlan_tag_get(skb) == adapter->hw.mng_cookie.vlan_id) &&
5708 (adapter->hw.mng_cookie.status &
5709 E1000_MNG_DHCP_COOKIE_STATUS_VLAN)))
5710 return 0;
5711
5712 if (skb->len <= MINIMUM_DHCP_PACKET_SIZE)
5713 return 0;
5714
5715 if (((struct ethhdr *)skb->data)->h_proto != htons(ETH_P_IP))
5716 return 0;
5717
5718 {
5719 const struct iphdr *ip = (struct iphdr *)((u8 *)skb->data + 14);
5720 struct udphdr *udp;
5721
5722 if (ip->protocol != IPPROTO_UDP)
5723 return 0;
5724
5725 udp = (struct udphdr *)((u8 *)ip + (ip->ihl << 2));
5726 if (ntohs(udp->dest) != 67)
5727 return 0;
5728
5729 offset = (u8 *)udp + 8 - skb->data;
5730 length = skb->len - offset;
5731 return e1000e_mng_write_dhcp_info(hw, (u8 *)udp + 8, length);
5732 }
5733
5734 return 0;
5735}
5736
5737static int __e1000_maybe_stop_tx(struct e1000_ring *tx_ring, int size)
5738{
5739 struct e1000_adapter *adapter = tx_ring->adapter;
5740
5741 netif_stop_queue(adapter->netdev);
5742 /* Herbert's original patch had:
5743 * smp_mb__after_netif_stop_queue();
5744 * but since that doesn't exist yet, just open code it.
5745 */
5746 smp_mb();
5747
5748 /* We need to check again in a case another CPU has just
5749 * made room available.
5750 */
5751 if (e1000_desc_unused(tx_ring) < size)
5752 return -EBUSY;
5753
5754 /* A reprieve! */
5755 netif_start_queue(adapter->netdev);
5756 ++adapter->restart_queue;
5757 return 0;
5758}
5759
5760static int e1000_maybe_stop_tx(struct e1000_ring *tx_ring, int size)
5761{
5762 BUG_ON(size > tx_ring->count);
5763
5764 if (e1000_desc_unused(tx_ring) >= size)
5765 return 0;
5766 return __e1000_maybe_stop_tx(tx_ring, size);
5767}
5768
5769static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
5770 struct net_device *netdev)
5771{
5772 struct e1000_adapter *adapter = netdev_priv(netdev);
5773 struct e1000_ring *tx_ring = adapter->tx_ring;
5774 unsigned int first;
5775 unsigned int tx_flags = 0;
5776 unsigned int len = skb_headlen(skb);
5777 unsigned int nr_frags;
5778 unsigned int mss;
5779 int count = 0;
5780 int tso;
5781 unsigned int f;
5782 __be16 protocol = vlan_get_protocol(skb);
5783
5784 if (test_bit(__E1000_DOWN, &adapter->state)) {
5785 dev_kfree_skb_any(skb);
5786 return NETDEV_TX_OK;
5787 }
5788
5789 if (skb->len <= 0) {
5790 dev_kfree_skb_any(skb);
5791 return NETDEV_TX_OK;
5792 }
5793
5794 /* The minimum packet size with TCTL.PSP set is 17 bytes so
5795 * pad skb in order to meet this minimum size requirement
5796 */
5797 if (skb_put_padto(skb, 17))
5798 return NETDEV_TX_OK;
5799
5800 mss = skb_shinfo(skb)->gso_size;
5801 if (mss) {
5802 u8 hdr_len;
5803
5804 /* TSO Workaround for 82571/2/3 Controllers -- if skb->data
5805 * points to just header, pull a few bytes of payload from
5806 * frags into skb->data
5807 */
5808 hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
5809 /* we do this workaround for ES2LAN, but it is un-necessary,
5810 * avoiding it could save a lot of cycles
5811 */
5812 if (skb->data_len && (hdr_len == len)) {
5813 unsigned int pull_size;
5814
5815 pull_size = min_t(unsigned int, 4, skb->data_len);
5816 if (!__pskb_pull_tail(skb, pull_size)) {
5817 e_err("__pskb_pull_tail failed.\n");
5818 dev_kfree_skb_any(skb);
5819 return NETDEV_TX_OK;
5820 }
5821 len = skb_headlen(skb);
5822 }
5823 }
5824
5825 /* reserve a descriptor for the offload context */
5826 if ((mss) || (skb->ip_summed == CHECKSUM_PARTIAL))
5827 count++;
5828 count++;
5829
5830 count += DIV_ROUND_UP(len, adapter->tx_fifo_limit);
5831
5832 nr_frags = skb_shinfo(skb)->nr_frags;
5833 for (f = 0; f < nr_frags; f++)
5834 count += DIV_ROUND_UP(skb_frag_size(&skb_shinfo(skb)->frags[f]),
5835 adapter->tx_fifo_limit);
5836
5837 if (adapter->hw.mac.tx_pkt_filtering)
5838 e1000_transfer_dhcp_info(adapter, skb);
5839
5840 /* need: count + 2 desc gap to keep tail from touching
5841 * head, otherwise try next time
5842 */
5843 if (e1000_maybe_stop_tx(tx_ring, count + 2))
5844 return NETDEV_TX_BUSY;
5845
5846 if (skb_vlan_tag_present(skb)) {
5847 tx_flags |= E1000_TX_FLAGS_VLAN;
5848 tx_flags |= (skb_vlan_tag_get(skb) <<
5849 E1000_TX_FLAGS_VLAN_SHIFT);
5850 }
5851
5852 first = tx_ring->next_to_use;
5853
5854 tso = e1000_tso(tx_ring, skb, protocol);
5855 if (tso < 0) {
5856 dev_kfree_skb_any(skb);
5857 return NETDEV_TX_OK;
5858 }
5859
5860 if (tso)
5861 tx_flags |= E1000_TX_FLAGS_TSO;
5862 else if (e1000_tx_csum(tx_ring, skb, protocol))
5863 tx_flags |= E1000_TX_FLAGS_CSUM;
5864
5865 /* Old method was to assume IPv4 packet by default if TSO was enabled.
5866 * 82571 hardware supports TSO capabilities for IPv6 as well...
5867 * no longer assume, we must.
5868 */
5869 if (protocol == htons(ETH_P_IP))
5870 tx_flags |= E1000_TX_FLAGS_IPV4;
5871
5872 if (unlikely(skb->no_fcs))
5873 tx_flags |= E1000_TX_FLAGS_NO_FCS;
5874
5875 /* if count is 0 then mapping error has occurred */
5876 count = e1000_tx_map(tx_ring, skb, first, adapter->tx_fifo_limit,
5877 nr_frags);
5878 if (count) {
5879 if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) &&
5880 (adapter->flags & FLAG_HAS_HW_TIMESTAMP)) {
5881 if (!adapter->tx_hwtstamp_skb) {
5882 skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
5883 tx_flags |= E1000_TX_FLAGS_HWTSTAMP;
5884 adapter->tx_hwtstamp_skb = skb_get(skb);
5885 adapter->tx_hwtstamp_start = jiffies;
5886 schedule_work(&adapter->tx_hwtstamp_work);
5887 } else {
5888 adapter->tx_hwtstamp_skipped++;
5889 }
5890 }
5891
5892 skb_tx_timestamp(skb);
5893
5894 netdev_sent_queue(netdev, skb->len);
5895 e1000_tx_queue(tx_ring, tx_flags, count);
5896 /* Make sure there is space in the ring for the next send. */
5897 e1000_maybe_stop_tx(tx_ring,
5898 (MAX_SKB_FRAGS *
5899 DIV_ROUND_UP(PAGE_SIZE,
5900 adapter->tx_fifo_limit) + 2));
5901
5902 if (!skb->xmit_more ||
5903 netif_xmit_stopped(netdev_get_tx_queue(netdev, 0))) {
5904 if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA)
5905 e1000e_update_tdt_wa(tx_ring,
5906 tx_ring->next_to_use);
5907 else
5908 writel(tx_ring->next_to_use, tx_ring->tail);
5909
5910 /* we need this if more than one processor can write
5911 * to our tail at a time, it synchronizes IO on
5912 *IA64/Altix systems
5913 */
5914 mmiowb();
5915 }
5916 } else {
5917 dev_kfree_skb_any(skb);
5918 tx_ring->buffer_info[first].time_stamp = 0;
5919 tx_ring->next_to_use = first;
5920 }
5921
5922 return NETDEV_TX_OK;
5923}
5924
5925/**
5926 * e1000_tx_timeout - Respond to a Tx Hang
5927 * @netdev: network interface device structure
5928 **/
5929static void e1000_tx_timeout(struct net_device *netdev)
5930{
5931 struct e1000_adapter *adapter = netdev_priv(netdev);
5932
5933 /* Do the reset outside of interrupt context */
5934 adapter->tx_timeout_count++;
5935 schedule_work(&adapter->reset_task);
5936}
5937
5938static void e1000_reset_task(struct work_struct *work)
5939{
5940 struct e1000_adapter *adapter;
5941 adapter = container_of(work, struct e1000_adapter, reset_task);
5942
5943 /* don't run the task if already down */
5944 if (test_bit(__E1000_DOWN, &adapter->state))
5945 return;
5946
5947 if (!(adapter->flags & FLAG_RESTART_NOW)) {
5948 e1000e_dump(adapter);
5949 e_err("Reset adapter unexpectedly\n");
5950 }
5951 e1000e_reinit_locked(adapter);
5952}
5953
5954/**
5955 * e1000_get_stats64 - Get System Network Statistics
5956 * @netdev: network interface device structure
5957 * @stats: rtnl_link_stats64 pointer
5958 *
5959 * Returns the address of the device statistics structure.
5960 **/
5961void e1000e_get_stats64(struct net_device *netdev,
5962 struct rtnl_link_stats64 *stats)
5963{
5964 struct e1000_adapter *adapter = netdev_priv(netdev);
5965
5966 spin_lock(&adapter->stats64_lock);
5967 e1000e_update_stats(adapter);
5968 /* Fill out the OS statistics structure */
5969 stats->rx_bytes = adapter->stats.gorc;
5970 stats->rx_packets = adapter->stats.gprc;
5971 stats->tx_bytes = adapter->stats.gotc;
5972 stats->tx_packets = adapter->stats.gptc;
5973 stats->multicast = adapter->stats.mprc;
5974 stats->collisions = adapter->stats.colc;
5975
5976 /* Rx Errors */
5977
5978 /* RLEC on some newer hardware can be incorrect so build
5979 * our own version based on RUC and ROC
5980 */
5981 stats->rx_errors = adapter->stats.rxerrc +
5982 adapter->stats.crcerrs + adapter->stats.algnerrc +
5983 adapter->stats.ruc + adapter->stats.roc + adapter->stats.cexterr;
5984 stats->rx_length_errors = adapter->stats.ruc + adapter->stats.roc;
5985 stats->rx_crc_errors = adapter->stats.crcerrs;
5986 stats->rx_frame_errors = adapter->stats.algnerrc;
5987 stats->rx_missed_errors = adapter->stats.mpc;
5988
5989 /* Tx Errors */
5990 stats->tx_errors = adapter->stats.ecol + adapter->stats.latecol;
5991 stats->tx_aborted_errors = adapter->stats.ecol;
5992 stats->tx_window_errors = adapter->stats.latecol;
5993 stats->tx_carrier_errors = adapter->stats.tncrs;
5994
5995 /* Tx Dropped needs to be maintained elsewhere */
5996
5997 spin_unlock(&adapter->stats64_lock);
5998}
5999
6000/**
6001 * e1000_change_mtu - Change the Maximum Transfer Unit
6002 * @netdev: network interface device structure
6003 * @new_mtu: new value for maximum frame size
6004 *
6005 * Returns 0 on success, negative on failure
6006 **/
6007static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
6008{
6009 struct e1000_adapter *adapter = netdev_priv(netdev);
6010 int max_frame = new_mtu + VLAN_ETH_HLEN + ETH_FCS_LEN;
6011
6012 /* Jumbo frame support */
6013 if ((new_mtu > ETH_DATA_LEN) &&
6014 !(adapter->flags & FLAG_HAS_JUMBO_FRAMES)) {
6015 e_err("Jumbo Frames not supported.\n");
6016 return -EINVAL;
6017 }
6018
6019 /* Jumbo frame workaround on 82579 and newer requires CRC be stripped */
6020 if ((adapter->hw.mac.type >= e1000_pch2lan) &&
6021 !(adapter->flags2 & FLAG2_CRC_STRIPPING) &&
6022 (new_mtu > ETH_DATA_LEN)) {
6023 e_err("Jumbo Frames not supported on this device when CRC stripping is disabled.\n");
6024 return -EINVAL;
6025 }
6026
6027 while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
6028 usleep_range(1000, 2000);
6029 /* e1000e_down -> e1000e_reset dependent on max_frame_size & mtu */
6030 adapter->max_frame_size = max_frame;
6031 e_info("changing MTU from %d to %d\n", netdev->mtu, new_mtu);
6032 netdev->mtu = new_mtu;
6033
6034 pm_runtime_get_sync(netdev->dev.parent);
6035
6036 if (netif_running(netdev))
6037 e1000e_down(adapter, true);
6038
6039 /* NOTE: netdev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN
6040 * means we reserve 2 more, this pushes us to allocate from the next
6041 * larger slab size.
6042 * i.e. RXBUFFER_2048 --> size-4096 slab
6043 * However with the new *_jumbo_rx* routines, jumbo receives will use
6044 * fragmented skbs
6045 */
6046
6047 if (max_frame <= 2048)
6048 adapter->rx_buffer_len = 2048;
6049 else
6050 adapter->rx_buffer_len = 4096;
6051
6052 /* adjust allocation if LPE protects us, and we aren't using SBP */
6053 if (max_frame <= (VLAN_ETH_FRAME_LEN + ETH_FCS_LEN))
6054 adapter->rx_buffer_len = VLAN_ETH_FRAME_LEN + ETH_FCS_LEN;
6055
6056 if (netif_running(netdev))
6057 e1000e_up(adapter);
6058 else
6059 e1000e_reset(adapter);
6060
6061 pm_runtime_put_sync(netdev->dev.parent);
6062
6063 clear_bit(__E1000_RESETTING, &adapter->state);
6064
6065 return 0;
6066}
6067
6068static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr,
6069 int cmd)
6070{
6071 struct e1000_adapter *adapter = netdev_priv(netdev);
6072 struct mii_ioctl_data *data = if_mii(ifr);
6073
6074 if (adapter->hw.phy.media_type != e1000_media_type_copper)
6075 return -EOPNOTSUPP;
6076
6077 switch (cmd) {
6078 case SIOCGMIIPHY:
6079 data->phy_id = adapter->hw.phy.addr;
6080 break;
6081 case SIOCGMIIREG:
6082 e1000_phy_read_status(adapter);
6083
6084 switch (data->reg_num & 0x1F) {
6085 case MII_BMCR:
6086 data->val_out = adapter->phy_regs.bmcr;
6087 break;
6088 case MII_BMSR:
6089 data->val_out = adapter->phy_regs.bmsr;
6090 break;
6091 case MII_PHYSID1:
6092 data->val_out = (adapter->hw.phy.id >> 16);
6093 break;
6094 case MII_PHYSID2:
6095 data->val_out = (adapter->hw.phy.id & 0xFFFF);
6096 break;
6097 case MII_ADVERTISE:
6098 data->val_out = adapter->phy_regs.advertise;
6099 break;
6100 case MII_LPA:
6101 data->val_out = adapter->phy_regs.lpa;
6102 break;
6103 case MII_EXPANSION:
6104 data->val_out = adapter->phy_regs.expansion;
6105 break;
6106 case MII_CTRL1000:
6107 data->val_out = adapter->phy_regs.ctrl1000;
6108 break;
6109 case MII_STAT1000:
6110 data->val_out = adapter->phy_regs.stat1000;
6111 break;
6112 case MII_ESTATUS:
6113 data->val_out = adapter->phy_regs.estatus;
6114 break;
6115 default:
6116 return -EIO;
6117 }
6118 break;
6119 case SIOCSMIIREG:
6120 default:
6121 return -EOPNOTSUPP;
6122 }
6123 return 0;
6124}
6125
6126/**
6127 * e1000e_hwtstamp_ioctl - control hardware time stamping
6128 * @netdev: network interface device structure
6129 * @ifreq: interface request
6130 *
6131 * Outgoing time stamping can be enabled and disabled. Play nice and
6132 * disable it when requested, although it shouldn't cause any overhead
6133 * when no packet needs it. At most one packet in the queue may be
6134 * marked for time stamping, otherwise it would be impossible to tell
6135 * for sure to which packet the hardware time stamp belongs.
6136 *
6137 * Incoming time stamping has to be configured via the hardware filters.
6138 * Not all combinations are supported, in particular event type has to be
6139 * specified. Matching the kind of event packet is not supported, with the
6140 * exception of "all V2 events regardless of level 2 or 4".
6141 **/
6142static int e1000e_hwtstamp_set(struct net_device *netdev, struct ifreq *ifr)
6143{
6144 struct e1000_adapter *adapter = netdev_priv(netdev);
6145 struct hwtstamp_config config;
6146 int ret_val;
6147
6148 if (copy_from_user(&config, ifr->ifr_data, sizeof(config)))
6149 return -EFAULT;
6150
6151 ret_val = e1000e_config_hwtstamp(adapter, &config);
6152 if (ret_val)
6153 return ret_val;
6154
6155 switch (config.rx_filter) {
6156 case HWTSTAMP_FILTER_PTP_V2_L4_SYNC:
6157 case HWTSTAMP_FILTER_PTP_V2_L2_SYNC:
6158 case HWTSTAMP_FILTER_PTP_V2_SYNC:
6159 case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ:
6160 case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ:
6161 case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ:
6162 /* With V2 type filters which specify a Sync or Delay Request,
6163 * Path Delay Request/Response messages are also time stamped
6164 * by hardware so notify the caller the requested packets plus
6165 * some others are time stamped.
6166 */
6167 config.rx_filter = HWTSTAMP_FILTER_SOME;
6168 break;
6169 default:
6170 break;
6171 }
6172
6173 return copy_to_user(ifr->ifr_data, &config,
6174 sizeof(config)) ? -EFAULT : 0;
6175}
6176
6177static int e1000e_hwtstamp_get(struct net_device *netdev, struct ifreq *ifr)
6178{
6179 struct e1000_adapter *adapter = netdev_priv(netdev);
6180
6181 return copy_to_user(ifr->ifr_data, &adapter->hwtstamp_config,
6182 sizeof(adapter->hwtstamp_config)) ? -EFAULT : 0;
6183}
6184
6185static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
6186{
6187 switch (cmd) {
6188 case SIOCGMIIPHY:
6189 case SIOCGMIIREG:
6190 case SIOCSMIIREG:
6191 return e1000_mii_ioctl(netdev, ifr, cmd);
6192 case SIOCSHWTSTAMP:
6193 return e1000e_hwtstamp_set(netdev, ifr);
6194 case SIOCGHWTSTAMP:
6195 return e1000e_hwtstamp_get(netdev, ifr);
6196 default:
6197 return -EOPNOTSUPP;
6198 }
6199}
6200
6201static int e1000_init_phy_wakeup(struct e1000_adapter *adapter, u32 wufc)
6202{
6203 struct e1000_hw *hw = &adapter->hw;
6204 u32 i, mac_reg, wuc;
6205 u16 phy_reg, wuc_enable;
6206 int retval;
6207
6208 /* copy MAC RARs to PHY RARs */
6209 e1000_copy_rx_addrs_to_phy_ich8lan(hw);
6210
6211 retval = hw->phy.ops.acquire(hw);
6212 if (retval) {
6213 e_err("Could not acquire PHY\n");
6214 return retval;
6215 }
6216
6217 /* Enable access to wakeup registers on and set page to BM_WUC_PAGE */
6218 retval = e1000_enable_phy_wakeup_reg_access_bm(hw, &wuc_enable);
6219 if (retval)
6220 goto release;
6221
6222 /* copy MAC MTA to PHY MTA - only needed for pchlan */
6223 for (i = 0; i < adapter->hw.mac.mta_reg_count; i++) {
6224 mac_reg = E1000_READ_REG_ARRAY(hw, E1000_MTA, i);
6225 hw->phy.ops.write_reg_page(hw, BM_MTA(i),
6226 (u16)(mac_reg & 0xFFFF));
6227 hw->phy.ops.write_reg_page(hw, BM_MTA(i) + 1,
6228 (u16)((mac_reg >> 16) & 0xFFFF));
6229 }
6230
6231 /* configure PHY Rx Control register */
6232 hw->phy.ops.read_reg_page(&adapter->hw, BM_RCTL, &phy_reg);
6233 mac_reg = er32(RCTL);
6234 if (mac_reg & E1000_RCTL_UPE)
6235 phy_reg |= BM_RCTL_UPE;
6236 if (mac_reg & E1000_RCTL_MPE)
6237 phy_reg |= BM_RCTL_MPE;
6238 phy_reg &= ~(BM_RCTL_MO_MASK);
6239 if (mac_reg & E1000_RCTL_MO_3)
6240 phy_reg |= (((mac_reg & E1000_RCTL_MO_3) >> E1000_RCTL_MO_SHIFT)
6241 << BM_RCTL_MO_SHIFT);
6242 if (mac_reg & E1000_RCTL_BAM)
6243 phy_reg |= BM_RCTL_BAM;
6244 if (mac_reg & E1000_RCTL_PMCF)
6245 phy_reg |= BM_RCTL_PMCF;
6246 mac_reg = er32(CTRL);
6247 if (mac_reg & E1000_CTRL_RFCE)
6248 phy_reg |= BM_RCTL_RFCE;
6249 hw->phy.ops.write_reg_page(&adapter->hw, BM_RCTL, phy_reg);
6250
6251 wuc = E1000_WUC_PME_EN;
6252 if (wufc & (E1000_WUFC_MAG | E1000_WUFC_LNKC))
6253 wuc |= E1000_WUC_APME;
6254
6255 /* enable PHY wakeup in MAC register */
6256 ew32(WUFC, wufc);
6257 ew32(WUC, (E1000_WUC_PHY_WAKE | E1000_WUC_APMPME |
6258 E1000_WUC_PME_STATUS | wuc));
6259
6260 /* configure and enable PHY wakeup in PHY registers */
6261 hw->phy.ops.write_reg_page(&adapter->hw, BM_WUFC, wufc);
6262 hw->phy.ops.write_reg_page(&adapter->hw, BM_WUC, wuc);
6263
6264 /* activate PHY wakeup */
6265 wuc_enable |= BM_WUC_ENABLE_BIT | BM_WUC_HOST_WU_BIT;
6266 retval = e1000_disable_phy_wakeup_reg_access_bm(hw, &wuc_enable);
6267 if (retval)
6268 e_err("Could not set PHY Host Wakeup bit\n");
6269release:
6270 hw->phy.ops.release(hw);
6271
6272 return retval;
6273}
6274
6275static void e1000e_flush_lpic(struct pci_dev *pdev)
6276{
6277 struct net_device *netdev = pci_get_drvdata(pdev);
6278 struct e1000_adapter *adapter = netdev_priv(netdev);
6279 struct e1000_hw *hw = &adapter->hw;
6280 u32 ret_val;
6281
6282 pm_runtime_get_sync(netdev->dev.parent);
6283
6284 ret_val = hw->phy.ops.acquire(hw);
6285 if (ret_val)
6286 goto fl_out;
6287
6288 pr_info("EEE TX LPI TIMER: %08X\n",
6289 er32(LPIC) >> E1000_LPIC_LPIET_SHIFT);
6290
6291 hw->phy.ops.release(hw);
6292
6293fl_out:
6294 pm_runtime_put_sync(netdev->dev.parent);
6295}
6296
6297static int e1000e_pm_freeze(struct device *dev)
6298{
6299 struct net_device *netdev = pci_get_drvdata(to_pci_dev(dev));
6300 struct e1000_adapter *adapter = netdev_priv(netdev);
6301
6302 netif_device_detach(netdev);
6303
6304 if (netif_running(netdev)) {
6305 int count = E1000_CHECK_RESET_COUNT;
6306
6307 while (test_bit(__E1000_RESETTING, &adapter->state) && count--)
6308 usleep_range(10000, 20000);
6309
6310 WARN_ON(test_bit(__E1000_RESETTING, &adapter->state));
6311
6312 /* Quiesce the device without resetting the hardware */
6313 e1000e_down(adapter, false);
6314 e1000_free_irq(adapter);
6315 }
6316 e1000e_reset_interrupt_capability(adapter);
6317
6318 /* Allow time for pending master requests to run */
6319 e1000e_disable_pcie_master(&adapter->hw);
6320
6321 return 0;
6322}
6323
6324static int __e1000_shutdown(struct pci_dev *pdev, bool runtime)
6325{
6326 struct net_device *netdev = pci_get_drvdata(pdev);
6327 struct e1000_adapter *adapter = netdev_priv(netdev);
6328 struct e1000_hw *hw = &adapter->hw;
6329 u32 ctrl, ctrl_ext, rctl, status;
6330 /* Runtime suspend should only enable wakeup for link changes */
6331 u32 wufc = runtime ? E1000_WUFC_LNKC : adapter->wol;
6332 int retval = 0;
6333
6334 status = er32(STATUS);
6335 if (status & E1000_STATUS_LU)
6336 wufc &= ~E1000_WUFC_LNKC;
6337
6338 if (wufc) {
6339 e1000_setup_rctl(adapter);
6340 e1000e_set_rx_mode(netdev);
6341
6342 /* turn on all-multi mode if wake on multicast is enabled */
6343 if (wufc & E1000_WUFC_MC) {
6344 rctl = er32(RCTL);
6345 rctl |= E1000_RCTL_MPE;
6346 ew32(RCTL, rctl);
6347 }
6348
6349 ctrl = er32(CTRL);
6350 ctrl |= E1000_CTRL_ADVD3WUC;
6351 if (!(adapter->flags2 & FLAG2_HAS_PHY_WAKEUP))
6352 ctrl |= E1000_CTRL_EN_PHY_PWR_MGMT;
6353 ew32(CTRL, ctrl);
6354
6355 if (adapter->hw.phy.media_type == e1000_media_type_fiber ||
6356 adapter->hw.phy.media_type ==
6357 e1000_media_type_internal_serdes) {
6358 /* keep the laser running in D3 */
6359 ctrl_ext = er32(CTRL_EXT);
6360 ctrl_ext |= E1000_CTRL_EXT_SDP3_DATA;
6361 ew32(CTRL_EXT, ctrl_ext);
6362 }
6363
6364 if (!runtime)
6365 e1000e_power_up_phy(adapter);
6366
6367 if (adapter->flags & FLAG_IS_ICH)
6368 e1000_suspend_workarounds_ich8lan(&adapter->hw);
6369
6370 if (adapter->flags2 & FLAG2_HAS_PHY_WAKEUP) {
6371 /* enable wakeup by the PHY */
6372 retval = e1000_init_phy_wakeup(adapter, wufc);
6373 if (retval)
6374 return retval;
6375 } else {
6376 /* enable wakeup by the MAC */
6377 ew32(WUFC, wufc);
6378 ew32(WUC, E1000_WUC_PME_EN);
6379 }
6380 } else {
6381 ew32(WUC, 0);
6382 ew32(WUFC, 0);
6383
6384 e1000_power_down_phy(adapter);
6385 }
6386
6387 if (adapter->hw.phy.type == e1000_phy_igp_3) {
6388 e1000e_igp3_phy_powerdown_workaround_ich8lan(&adapter->hw);
6389 } else if (hw->mac.type >= e1000_pch_lpt) {
6390 if (!(wufc & (E1000_WUFC_EX | E1000_WUFC_MC | E1000_WUFC_BC)))
6391 /* ULP does not support wake from unicast, multicast
6392 * or broadcast.
6393 */
6394 retval = e1000_enable_ulp_lpt_lp(hw, !runtime);
6395
6396 if (retval)
6397 return retval;
6398 }
6399
6400 /* Ensure that the appropriate bits are set in LPI_CTRL
6401 * for EEE in Sx
6402 */
6403 if ((hw->phy.type >= e1000_phy_i217) &&
6404 adapter->eee_advert && hw->dev_spec.ich8lan.eee_lp_ability) {
6405 u16 lpi_ctrl = 0;
6406
6407 retval = hw->phy.ops.acquire(hw);
6408 if (!retval) {
6409 retval = e1e_rphy_locked(hw, I82579_LPI_CTRL,
6410 &lpi_ctrl);
6411 if (!retval) {
6412 if (adapter->eee_advert &
6413 hw->dev_spec.ich8lan.eee_lp_ability &
6414 I82579_EEE_100_SUPPORTED)
6415 lpi_ctrl |= I82579_LPI_CTRL_100_ENABLE;
6416 if (adapter->eee_advert &
6417 hw->dev_spec.ich8lan.eee_lp_ability &
6418 I82579_EEE_1000_SUPPORTED)
6419 lpi_ctrl |= I82579_LPI_CTRL_1000_ENABLE;
6420
6421 retval = e1e_wphy_locked(hw, I82579_LPI_CTRL,
6422 lpi_ctrl);
6423 }
6424 }
6425 hw->phy.ops.release(hw);
6426 }
6427
6428 /* Release control of h/w to f/w. If f/w is AMT enabled, this
6429 * would have already happened in close and is redundant.
6430 */
6431 e1000e_release_hw_control(adapter);
6432
6433 pci_clear_master(pdev);
6434
6435 /* The pci-e switch on some quad port adapters will report a
6436 * correctable error when the MAC transitions from D0 to D3. To
6437 * prevent this we need to mask off the correctable errors on the
6438 * downstream port of the pci-e switch.
6439 *
6440 * We don't have the associated upstream bridge while assigning
6441 * the PCI device into guest. For example, the KVM on power is
6442 * one of the cases.
6443 */
6444 if (adapter->flags & FLAG_IS_QUAD_PORT) {
6445 struct pci_dev *us_dev = pdev->bus->self;
6446 u16 devctl;
6447
6448 if (!us_dev)
6449 return 0;
6450
6451 pcie_capability_read_word(us_dev, PCI_EXP_DEVCTL, &devctl);
6452 pcie_capability_write_word(us_dev, PCI_EXP_DEVCTL,
6453 (devctl & ~PCI_EXP_DEVCTL_CERE));
6454
6455 pci_save_state(pdev);
6456 pci_prepare_to_sleep(pdev);
6457
6458 pcie_capability_write_word(us_dev, PCI_EXP_DEVCTL, devctl);
6459 }
6460
6461 return 0;
6462}
6463
6464/**
6465 * __e1000e_disable_aspm - Disable ASPM states
6466 * @pdev: pointer to PCI device struct
6467 * @state: bit-mask of ASPM states to disable
6468 * @locked: indication if this context holds pci_bus_sem locked.
6469 *
6470 * Some devices *must* have certain ASPM states disabled per hardware errata.
6471 **/
6472static void __e1000e_disable_aspm(struct pci_dev *pdev, u16 state, int locked)
6473{
6474 struct pci_dev *parent = pdev->bus->self;
6475 u16 aspm_dis_mask = 0;
6476 u16 pdev_aspmc, parent_aspmc;
6477
6478 switch (state) {
6479 case PCIE_LINK_STATE_L0S:
6480 case PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1:
6481 aspm_dis_mask |= PCI_EXP_LNKCTL_ASPM_L0S;
6482 /* fall-through - can't have L1 without L0s */
6483 case PCIE_LINK_STATE_L1:
6484 aspm_dis_mask |= PCI_EXP_LNKCTL_ASPM_L1;
6485 break;
6486 default:
6487 return;
6488 }
6489
6490 pcie_capability_read_word(pdev, PCI_EXP_LNKCTL, &pdev_aspmc);
6491 pdev_aspmc &= PCI_EXP_LNKCTL_ASPMC;
6492
6493 if (parent) {
6494 pcie_capability_read_word(parent, PCI_EXP_LNKCTL,
6495 &parent_aspmc);
6496 parent_aspmc &= PCI_EXP_LNKCTL_ASPMC;
6497 }
6498
6499 /* Nothing to do if the ASPM states to be disabled already are */
6500 if (!(pdev_aspmc & aspm_dis_mask) &&
6501 (!parent || !(parent_aspmc & aspm_dis_mask)))
6502 return;
6503
6504 dev_info(&pdev->dev, "Disabling ASPM %s %s\n",
6505 (aspm_dis_mask & pdev_aspmc & PCI_EXP_LNKCTL_ASPM_L0S) ?
6506 "L0s" : "",
6507 (aspm_dis_mask & pdev_aspmc & PCI_EXP_LNKCTL_ASPM_L1) ?
6508 "L1" : "");
6509
6510#ifdef CONFIG_PCIEASPM
6511 if (locked)
6512 pci_disable_link_state_locked(pdev, state);
6513 else
6514 pci_disable_link_state(pdev, state);
6515
6516 /* Double-check ASPM control. If not disabled by the above, the
6517 * BIOS is preventing that from happening (or CONFIG_PCIEASPM is
6518 * not enabled); override by writing PCI config space directly.
6519 */
6520 pcie_capability_read_word(pdev, PCI_EXP_LNKCTL, &pdev_aspmc);
6521 pdev_aspmc &= PCI_EXP_LNKCTL_ASPMC;
6522
6523 if (!(aspm_dis_mask & pdev_aspmc))
6524 return;
6525#endif
6526
6527 /* Both device and parent should have the same ASPM setting.
6528 * Disable ASPM in downstream component first and then upstream.
6529 */
6530 pcie_capability_clear_word(pdev, PCI_EXP_LNKCTL, aspm_dis_mask);
6531
6532 if (parent)
6533 pcie_capability_clear_word(parent, PCI_EXP_LNKCTL,
6534 aspm_dis_mask);
6535}
6536
6537/**
6538 * e1000e_disable_aspm - Disable ASPM states.
6539 * @pdev: pointer to PCI device struct
6540 * @state: bit-mask of ASPM states to disable
6541 *
6542 * This function acquires the pci_bus_sem!
6543 * Some devices *must* have certain ASPM states disabled per hardware errata.
6544 **/
6545static void e1000e_disable_aspm(struct pci_dev *pdev, u16 state)
6546{
6547 __e1000e_disable_aspm(pdev, state, 0);
6548}
6549
6550/**
6551 * e1000e_disable_aspm_locked Disable ASPM states.
6552 * @pdev: pointer to PCI device struct
6553 * @state: bit-mask of ASPM states to disable
6554 *
6555 * This function must be called with pci_bus_sem acquired!
6556 * Some devices *must* have certain ASPM states disabled per hardware errata.
6557 **/
6558static void e1000e_disable_aspm_locked(struct pci_dev *pdev, u16 state)
6559{
6560 __e1000e_disable_aspm(pdev, state, 1);
6561}
6562
6563#ifdef CONFIG_PM
6564static int __e1000_resume(struct pci_dev *pdev)
6565{
6566 struct net_device *netdev = pci_get_drvdata(pdev);
6567 struct e1000_adapter *adapter = netdev_priv(netdev);
6568 struct e1000_hw *hw = &adapter->hw;
6569 u16 aspm_disable_flag = 0;
6570
6571 if (adapter->flags2 & FLAG2_DISABLE_ASPM_L0S)
6572 aspm_disable_flag = PCIE_LINK_STATE_L0S;
6573 if (adapter->flags2 & FLAG2_DISABLE_ASPM_L1)
6574 aspm_disable_flag |= PCIE_LINK_STATE_L1;
6575 if (aspm_disable_flag)
6576 e1000e_disable_aspm(pdev, aspm_disable_flag);
6577
6578 pci_set_master(pdev);
6579
6580 if (hw->mac.type >= e1000_pch2lan)
6581 e1000_resume_workarounds_pchlan(&adapter->hw);
6582
6583 e1000e_power_up_phy(adapter);
6584
6585 /* report the system wakeup cause from S3/S4 */
6586 if (adapter->flags2 & FLAG2_HAS_PHY_WAKEUP) {
6587 u16 phy_data;
6588
6589 e1e_rphy(&adapter->hw, BM_WUS, &phy_data);
6590 if (phy_data) {
6591 e_info("PHY Wakeup cause - %s\n",
6592 phy_data & E1000_WUS_EX ? "Unicast Packet" :
6593 phy_data & E1000_WUS_MC ? "Multicast Packet" :
6594 phy_data & E1000_WUS_BC ? "Broadcast Packet" :
6595 phy_data & E1000_WUS_MAG ? "Magic Packet" :
6596 phy_data & E1000_WUS_LNKC ?
6597 "Link Status Change" : "other");
6598 }
6599 e1e_wphy(&adapter->hw, BM_WUS, ~0);
6600 } else {
6601 u32 wus = er32(WUS);
6602
6603 if (wus) {
6604 e_info("MAC Wakeup cause - %s\n",
6605 wus & E1000_WUS_EX ? "Unicast Packet" :
6606 wus & E1000_WUS_MC ? "Multicast Packet" :
6607 wus & E1000_WUS_BC ? "Broadcast Packet" :
6608 wus & E1000_WUS_MAG ? "Magic Packet" :
6609 wus & E1000_WUS_LNKC ? "Link Status Change" :
6610 "other");
6611 }
6612 ew32(WUS, ~0);
6613 }
6614
6615 e1000e_reset(adapter);
6616
6617 e1000_init_manageability_pt(adapter);
6618
6619 /* If the controller has AMT, do not set DRV_LOAD until the interface
6620 * is up. For all other cases, let the f/w know that the h/w is now
6621 * under the control of the driver.
6622 */
6623 if (!(adapter->flags & FLAG_HAS_AMT))
6624 e1000e_get_hw_control(adapter);
6625
6626 return 0;
6627}
6628
6629#ifdef CONFIG_PM_SLEEP
6630static int e1000e_pm_thaw(struct device *dev)
6631{
6632 struct net_device *netdev = pci_get_drvdata(to_pci_dev(dev));
6633 struct e1000_adapter *adapter = netdev_priv(netdev);
6634
6635 e1000e_set_interrupt_capability(adapter);
6636 if (netif_running(netdev)) {
6637 u32 err = e1000_request_irq(adapter);
6638
6639 if (err)
6640 return err;
6641
6642 e1000e_up(adapter);
6643 }
6644
6645 netif_device_attach(netdev);
6646
6647 return 0;
6648}
6649
6650static int e1000e_pm_suspend(struct device *dev)
6651{
6652 struct pci_dev *pdev = to_pci_dev(dev);
6653 int rc;
6654
6655 e1000e_flush_lpic(pdev);
6656
6657 e1000e_pm_freeze(dev);
6658
6659 rc = __e1000_shutdown(pdev, false);
6660 if (rc)
6661 e1000e_pm_thaw(dev);
6662
6663 return rc;
6664}
6665
6666static int e1000e_pm_resume(struct device *dev)
6667{
6668 struct pci_dev *pdev = to_pci_dev(dev);
6669 int rc;
6670
6671 rc = __e1000_resume(pdev);
6672 if (rc)
6673 return rc;
6674
6675 return e1000e_pm_thaw(dev);
6676}
6677#endif /* CONFIG_PM_SLEEP */
6678
6679static int e1000e_pm_runtime_idle(struct device *dev)
6680{
6681 struct pci_dev *pdev = to_pci_dev(dev);
6682 struct net_device *netdev = pci_get_drvdata(pdev);
6683 struct e1000_adapter *adapter = netdev_priv(netdev);
6684 u16 eee_lp;
6685
6686 eee_lp = adapter->hw.dev_spec.ich8lan.eee_lp_ability;
6687
6688 if (!e1000e_has_link(adapter)) {
6689 adapter->hw.dev_spec.ich8lan.eee_lp_ability = eee_lp;
6690 pm_schedule_suspend(dev, 5 * MSEC_PER_SEC);
6691 }
6692
6693 return -EBUSY;
6694}
6695
6696static int e1000e_pm_runtime_resume(struct device *dev)
6697{
6698 struct pci_dev *pdev = to_pci_dev(dev);
6699 struct net_device *netdev = pci_get_drvdata(pdev);
6700 struct e1000_adapter *adapter = netdev_priv(netdev);
6701 int rc;
6702
6703 rc = __e1000_resume(pdev);
6704 if (rc)
6705 return rc;
6706
6707 if (netdev->flags & IFF_UP)
6708 e1000e_up(adapter);
6709
6710 return rc;
6711}
6712
6713static int e1000e_pm_runtime_suspend(struct device *dev)
6714{
6715 struct pci_dev *pdev = to_pci_dev(dev);
6716 struct net_device *netdev = pci_get_drvdata(pdev);
6717 struct e1000_adapter *adapter = netdev_priv(netdev);
6718
6719 if (netdev->flags & IFF_UP) {
6720 int count = E1000_CHECK_RESET_COUNT;
6721
6722 while (test_bit(__E1000_RESETTING, &adapter->state) && count--)
6723 usleep_range(10000, 20000);
6724
6725 WARN_ON(test_bit(__E1000_RESETTING, &adapter->state));
6726
6727 /* Down the device without resetting the hardware */
6728 e1000e_down(adapter, false);
6729 }
6730
6731 if (__e1000_shutdown(pdev, true)) {
6732 e1000e_pm_runtime_resume(dev);
6733 return -EBUSY;
6734 }
6735
6736 return 0;
6737}
6738#endif /* CONFIG_PM */
6739
6740static void e1000_shutdown(struct pci_dev *pdev)
6741{
6742 e1000e_flush_lpic(pdev);
6743
6744 e1000e_pm_freeze(&pdev->dev);
6745
6746 __e1000_shutdown(pdev, false);
6747}
6748
6749#ifdef CONFIG_NET_POLL_CONTROLLER
6750
6751static irqreturn_t e1000_intr_msix(int __always_unused irq, void *data)
6752{
6753 struct net_device *netdev = data;
6754 struct e1000_adapter *adapter = netdev_priv(netdev);
6755
6756 if (adapter->msix_entries) {
6757 int vector, msix_irq;
6758
6759 vector = 0;
6760 msix_irq = adapter->msix_entries[vector].vector;
6761 if (disable_hardirq(msix_irq))
6762 e1000_intr_msix_rx(msix_irq, netdev);
6763 enable_irq(msix_irq);
6764
6765 vector++;
6766 msix_irq = adapter->msix_entries[vector].vector;
6767 if (disable_hardirq(msix_irq))
6768 e1000_intr_msix_tx(msix_irq, netdev);
6769 enable_irq(msix_irq);
6770
6771 vector++;
6772 msix_irq = adapter->msix_entries[vector].vector;
6773 if (disable_hardirq(msix_irq))
6774 e1000_msix_other(msix_irq, netdev);
6775 enable_irq(msix_irq);
6776 }
6777
6778 return IRQ_HANDLED;
6779}
6780
6781/**
6782 * e1000_netpoll
6783 * @netdev: network interface device structure
6784 *
6785 * Polling 'interrupt' - used by things like netconsole to send skbs
6786 * without having to re-enable interrupts. It's not called while
6787 * the interrupt routine is executing.
6788 */
6789static void e1000_netpoll(struct net_device *netdev)
6790{
6791 struct e1000_adapter *adapter = netdev_priv(netdev);
6792
6793 switch (adapter->int_mode) {
6794 case E1000E_INT_MODE_MSIX:
6795 e1000_intr_msix(adapter->pdev->irq, netdev);
6796 break;
6797 case E1000E_INT_MODE_MSI:
6798 if (disable_hardirq(adapter->pdev->irq))
6799 e1000_intr_msi(adapter->pdev->irq, netdev);
6800 enable_irq(adapter->pdev->irq);
6801 break;
6802 default: /* E1000E_INT_MODE_LEGACY */
6803 if (disable_hardirq(adapter->pdev->irq))
6804 e1000_intr(adapter->pdev->irq, netdev);
6805 enable_irq(adapter->pdev->irq);
6806 break;
6807 }
6808}
6809#endif
6810
6811/**
6812 * e1000_io_error_detected - called when PCI error is detected
6813 * @pdev: Pointer to PCI device
6814 * @state: The current pci connection state
6815 *
6816 * This function is called after a PCI bus error affecting
6817 * this device has been detected.
6818 */
6819static pci_ers_result_t e1000_io_error_detected(struct pci_dev *pdev,
6820 pci_channel_state_t state)
6821{
6822 struct net_device *netdev = pci_get_drvdata(pdev);
6823 struct e1000_adapter *adapter = netdev_priv(netdev);
6824
6825 netif_device_detach(netdev);
6826
6827 if (state == pci_channel_io_perm_failure)
6828 return PCI_ERS_RESULT_DISCONNECT;
6829
6830 if (netif_running(netdev))
6831 e1000e_down(adapter, true);
6832 pci_disable_device(pdev);
6833
6834 /* Request a slot slot reset. */
6835 return PCI_ERS_RESULT_NEED_RESET;
6836}
6837
6838/**
6839 * e1000_io_slot_reset - called after the pci bus has been reset.
6840 * @pdev: Pointer to PCI device
6841 *
6842 * Restart the card from scratch, as if from a cold-boot. Implementation
6843 * resembles the first-half of the e1000e_pm_resume routine.
6844 */
6845static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev)
6846{
6847 struct net_device *netdev = pci_get_drvdata(pdev);
6848 struct e1000_adapter *adapter = netdev_priv(netdev);
6849 struct e1000_hw *hw = &adapter->hw;
6850 u16 aspm_disable_flag = 0;
6851 int err;
6852 pci_ers_result_t result;
6853
6854 if (adapter->flags2 & FLAG2_DISABLE_ASPM_L0S)
6855 aspm_disable_flag = PCIE_LINK_STATE_L0S;
6856 if (adapter->flags2 & FLAG2_DISABLE_ASPM_L1)
6857 aspm_disable_flag |= PCIE_LINK_STATE_L1;
6858 if (aspm_disable_flag)
6859 e1000e_disable_aspm_locked(pdev, aspm_disable_flag);
6860
6861 err = pci_enable_device_mem(pdev);
6862 if (err) {
6863 dev_err(&pdev->dev,
6864 "Cannot re-enable PCI device after reset.\n");
6865 result = PCI_ERS_RESULT_DISCONNECT;
6866 } else {
6867 pdev->state_saved = true;
6868 pci_restore_state(pdev);
6869 pci_set_master(pdev);
6870
6871 pci_enable_wake(pdev, PCI_D3hot, 0);
6872 pci_enable_wake(pdev, PCI_D3cold, 0);
6873
6874 e1000e_reset(adapter);
6875 ew32(WUS, ~0);
6876 result = PCI_ERS_RESULT_RECOVERED;
6877 }
6878
6879 pci_cleanup_aer_uncorrect_error_status(pdev);
6880
6881 return result;
6882}
6883
6884/**
6885 * e1000_io_resume - called when traffic can start flowing again.
6886 * @pdev: Pointer to PCI device
6887 *
6888 * This callback is called when the error recovery driver tells us that
6889 * its OK to resume normal operation. Implementation resembles the
6890 * second-half of the e1000e_pm_resume routine.
6891 */
6892static void e1000_io_resume(struct pci_dev *pdev)
6893{
6894 struct net_device *netdev = pci_get_drvdata(pdev);
6895 struct e1000_adapter *adapter = netdev_priv(netdev);
6896
6897 e1000_init_manageability_pt(adapter);
6898
6899 if (netif_running(netdev))
6900 e1000e_up(adapter);
6901
6902 netif_device_attach(netdev);
6903
6904 /* If the controller has AMT, do not set DRV_LOAD until the interface
6905 * is up. For all other cases, let the f/w know that the h/w is now
6906 * under the control of the driver.
6907 */
6908 if (!(adapter->flags & FLAG_HAS_AMT))
6909 e1000e_get_hw_control(adapter);
6910}
6911
6912static void e1000_print_device_info(struct e1000_adapter *adapter)
6913{
6914 struct e1000_hw *hw = &adapter->hw;
6915 struct net_device *netdev = adapter->netdev;
6916 u32 ret_val;
6917 u8 pba_str[E1000_PBANUM_LENGTH];
6918
6919 /* print bus type/speed/width info */
6920 e_info("(PCI Express:2.5GT/s:%s) %pM\n",
6921 /* bus width */
6922 ((hw->bus.width == e1000_bus_width_pcie_x4) ? "Width x4" :
6923 "Width x1"),
6924 /* MAC address */
6925 netdev->dev_addr);
6926 e_info("Intel(R) PRO/%s Network Connection\n",
6927 (hw->phy.type == e1000_phy_ife) ? "10/100" : "1000");
6928 ret_val = e1000_read_pba_string_generic(hw, pba_str,
6929 E1000_PBANUM_LENGTH);
6930 if (ret_val)
6931 strlcpy((char *)pba_str, "Unknown", sizeof(pba_str));
6932 e_info("MAC: %d, PHY: %d, PBA No: %s\n",
6933 hw->mac.type, hw->phy.type, pba_str);
6934}
6935
6936static void e1000_eeprom_checks(struct e1000_adapter *adapter)
6937{
6938 struct e1000_hw *hw = &adapter->hw;
6939 int ret_val;
6940 u16 buf = 0;
6941
6942 if (hw->mac.type != e1000_82573)
6943 return;
6944
6945 ret_val = e1000_read_nvm(hw, NVM_INIT_CONTROL2_REG, 1, &buf);
6946 le16_to_cpus(&buf);
6947 if (!ret_val && (!(buf & BIT(0)))) {
6948 /* Deep Smart Power Down (DSPD) */
6949 dev_warn(&adapter->pdev->dev,
6950 "Warning: detected DSPD enabled in EEPROM\n");
6951 }
6952}
6953
6954static netdev_features_t e1000_fix_features(struct net_device *netdev,
6955 netdev_features_t features)
6956{
6957 struct e1000_adapter *adapter = netdev_priv(netdev);
6958 struct e1000_hw *hw = &adapter->hw;
6959
6960 /* Jumbo frame workaround on 82579 and newer requires CRC be stripped */
6961 if ((hw->mac.type >= e1000_pch2lan) && (netdev->mtu > ETH_DATA_LEN))
6962 features &= ~NETIF_F_RXFCS;
6963
6964 /* Since there is no support for separate Rx/Tx vlan accel
6965 * enable/disable make sure Tx flag is always in same state as Rx.
6966 */
6967 if (features & NETIF_F_HW_VLAN_CTAG_RX)
6968 features |= NETIF_F_HW_VLAN_CTAG_TX;
6969 else
6970 features &= ~NETIF_F_HW_VLAN_CTAG_TX;
6971
6972 return features;
6973}
6974
6975static int e1000_set_features(struct net_device *netdev,
6976 netdev_features_t features)
6977{
6978 struct e1000_adapter *adapter = netdev_priv(netdev);
6979 netdev_features_t changed = features ^ netdev->features;
6980
6981 if (changed & (NETIF_F_TSO | NETIF_F_TSO6))
6982 adapter->flags |= FLAG_TSO_FORCE;
6983
6984 if (!(changed & (NETIF_F_HW_VLAN_CTAG_RX | NETIF_F_HW_VLAN_CTAG_TX |
6985 NETIF_F_RXCSUM | NETIF_F_RXHASH | NETIF_F_RXFCS |
6986 NETIF_F_RXALL)))
6987 return 0;
6988
6989 if (changed & NETIF_F_RXFCS) {
6990 if (features & NETIF_F_RXFCS) {
6991 adapter->flags2 &= ~FLAG2_CRC_STRIPPING;
6992 } else {
6993 /* We need to take it back to defaults, which might mean
6994 * stripping is still disabled at the adapter level.
6995 */
6996 if (adapter->flags2 & FLAG2_DFLT_CRC_STRIPPING)
6997 adapter->flags2 |= FLAG2_CRC_STRIPPING;
6998 else
6999 adapter->flags2 &= ~FLAG2_CRC_STRIPPING;
7000 }
7001 }
7002
7003 netdev->features = features;
7004
7005 if (netif_running(netdev))
7006 e1000e_reinit_locked(adapter);
7007 else
7008 e1000e_reset(adapter);
7009
7010 return 0;
7011}
7012
7013static const struct net_device_ops e1000e_netdev_ops = {
7014 .ndo_open = e1000e_open,
7015 .ndo_stop = e1000e_close,
7016 .ndo_start_xmit = e1000_xmit_frame,
7017 .ndo_get_stats64 = e1000e_get_stats64,
7018 .ndo_set_rx_mode = e1000e_set_rx_mode,
7019 .ndo_set_mac_address = e1000_set_mac,
7020 .ndo_change_mtu = e1000_change_mtu,
7021 .ndo_do_ioctl = e1000_ioctl,
7022 .ndo_tx_timeout = e1000_tx_timeout,
7023 .ndo_validate_addr = eth_validate_addr,
7024
7025 .ndo_vlan_rx_add_vid = e1000_vlan_rx_add_vid,
7026 .ndo_vlan_rx_kill_vid = e1000_vlan_rx_kill_vid,
7027#ifdef CONFIG_NET_POLL_CONTROLLER
7028 .ndo_poll_controller = e1000_netpoll,
7029#endif
7030 .ndo_set_features = e1000_set_features,
7031 .ndo_fix_features = e1000_fix_features,
7032 .ndo_features_check = passthru_features_check,
7033};
7034
7035/**
7036 * e1000_probe - Device Initialization Routine
7037 * @pdev: PCI device information struct
7038 * @ent: entry in e1000_pci_tbl
7039 *
7040 * Returns 0 on success, negative on failure
7041 *
7042 * e1000_probe initializes an adapter identified by a pci_dev structure.
7043 * The OS initialization, configuring of the adapter private structure,
7044 * and a hardware reset occur.
7045 **/
7046static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
7047{
7048 struct net_device *netdev;
7049 struct e1000_adapter *adapter;
7050 struct e1000_hw *hw;
7051 const struct e1000_info *ei = e1000_info_tbl[ent->driver_data];
7052 resource_size_t mmio_start, mmio_len;
7053 resource_size_t flash_start, flash_len;
7054 static int cards_found;
7055 u16 aspm_disable_flag = 0;
7056 int bars, i, err, pci_using_dac;
7057 u16 eeprom_data = 0;
7058 u16 eeprom_apme_mask = E1000_EEPROM_APME;
7059 s32 ret_val = 0;
7060
7061 if (ei->flags2 & FLAG2_DISABLE_ASPM_L0S)
7062 aspm_disable_flag = PCIE_LINK_STATE_L0S;
7063 if (ei->flags2 & FLAG2_DISABLE_ASPM_L1)
7064 aspm_disable_flag |= PCIE_LINK_STATE_L1;
7065 if (aspm_disable_flag)
7066 e1000e_disable_aspm(pdev, aspm_disable_flag);
7067
7068 err = pci_enable_device_mem(pdev);
7069 if (err)
7070 return err;
7071
7072 pci_using_dac = 0;
7073 err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
7074 if (!err) {
7075 pci_using_dac = 1;
7076 } else {
7077 err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
7078 if (err) {
7079 dev_err(&pdev->dev,
7080 "No usable DMA configuration, aborting\n");
7081 goto err_dma;
7082 }
7083 }
7084
7085 bars = pci_select_bars(pdev, IORESOURCE_MEM);
7086 err = pci_request_selected_regions_exclusive(pdev, bars,
7087 e1000e_driver_name);
7088 if (err)
7089 goto err_pci_reg;
7090
7091 /* AER (Advanced Error Reporting) hooks */
7092 pci_enable_pcie_error_reporting(pdev);
7093
7094 pci_set_master(pdev);
7095 /* PCI config space info */
7096 err = pci_save_state(pdev);
7097 if (err)
7098 goto err_alloc_etherdev;
7099
7100 err = -ENOMEM;
7101 netdev = alloc_etherdev(sizeof(struct e1000_adapter));
7102 if (!netdev)
7103 goto err_alloc_etherdev;
7104
7105 SET_NETDEV_DEV(netdev, &pdev->dev);
7106
7107 netdev->irq = pdev->irq;
7108
7109 pci_set_drvdata(pdev, netdev);
7110 adapter = netdev_priv(netdev);
7111 hw = &adapter->hw;
7112 adapter->netdev = netdev;
7113 adapter->pdev = pdev;
7114 adapter->ei = ei;
7115 adapter->pba = ei->pba;
7116 adapter->flags = ei->flags;
7117 adapter->flags2 = ei->flags2;
7118 adapter->hw.adapter = adapter;
7119 adapter->hw.mac.type = ei->mac;
7120 adapter->max_hw_frame_size = ei->max_hw_frame_size;
7121 adapter->msg_enable = netif_msg_init(debug, DEFAULT_MSG_ENABLE);
7122
7123 mmio_start = pci_resource_start(pdev, 0);
7124 mmio_len = pci_resource_len(pdev, 0);
7125
7126 err = -EIO;
7127 adapter->hw.hw_addr = ioremap(mmio_start, mmio_len);
7128 if (!adapter->hw.hw_addr)
7129 goto err_ioremap;
7130
7131 if ((adapter->flags & FLAG_HAS_FLASH) &&
7132 (pci_resource_flags(pdev, 1) & IORESOURCE_MEM) &&
7133 (hw->mac.type < e1000_pch_spt)) {
7134 flash_start = pci_resource_start(pdev, 1);
7135 flash_len = pci_resource_len(pdev, 1);
7136 adapter->hw.flash_address = ioremap(flash_start, flash_len);
7137 if (!adapter->hw.flash_address)
7138 goto err_flashmap;
7139 }
7140
7141 /* Set default EEE advertisement */
7142 if (adapter->flags2 & FLAG2_HAS_EEE)
7143 adapter->eee_advert = MDIO_EEE_100TX | MDIO_EEE_1000T;
7144
7145 /* construct the net_device struct */
7146 netdev->netdev_ops = &e1000e_netdev_ops;
7147 e1000e_set_ethtool_ops(netdev);
7148 netdev->watchdog_timeo = 5 * HZ;
7149 netif_napi_add(netdev, &adapter->napi, e1000e_poll, 64);
7150 strlcpy(netdev->name, pci_name(pdev), sizeof(netdev->name));
7151
7152 netdev->mem_start = mmio_start;
7153 netdev->mem_end = mmio_start + mmio_len;
7154
7155 adapter->bd_number = cards_found++;
7156
7157 e1000e_check_options(adapter);
7158
7159 /* setup adapter struct */
7160 err = e1000_sw_init(adapter);
7161 if (err)
7162 goto err_sw_init;
7163
7164 memcpy(&hw->mac.ops, ei->mac_ops, sizeof(hw->mac.ops));
7165 memcpy(&hw->nvm.ops, ei->nvm_ops, sizeof(hw->nvm.ops));
7166 memcpy(&hw->phy.ops, ei->phy_ops, sizeof(hw->phy.ops));
7167
7168 err = ei->get_variants(adapter);
7169 if (err)
7170 goto err_hw_init;
7171
7172 if ((adapter->flags & FLAG_IS_ICH) &&
7173 (adapter->flags & FLAG_READ_ONLY_NVM) &&
7174 (hw->mac.type < e1000_pch_spt))
7175 e1000e_write_protect_nvm_ich8lan(&adapter->hw);
7176
7177 hw->mac.ops.get_bus_info(&adapter->hw);
7178
7179 adapter->hw.phy.autoneg_wait_to_complete = 0;
7180
7181 /* Copper options */
7182 if (adapter->hw.phy.media_type == e1000_media_type_copper) {
7183 adapter->hw.phy.mdix = AUTO_ALL_MODES;
7184 adapter->hw.phy.disable_polarity_correction = 0;
7185 adapter->hw.phy.ms_type = e1000_ms_hw_default;
7186 }
7187
7188 if (hw->phy.ops.check_reset_block && hw->phy.ops.check_reset_block(hw))
7189 dev_info(&pdev->dev,
7190 "PHY reset is blocked due to SOL/IDER session.\n");
7191
7192 /* Set initial default active device features */
7193 netdev->features = (NETIF_F_SG |
7194 NETIF_F_HW_VLAN_CTAG_RX |
7195 NETIF_F_HW_VLAN_CTAG_TX |
7196 NETIF_F_TSO |
7197 NETIF_F_TSO6 |
7198 NETIF_F_RXHASH |
7199 NETIF_F_RXCSUM |
7200 NETIF_F_HW_CSUM);
7201
7202 /* Set user-changeable features (subset of all device features) */
7203 netdev->hw_features = netdev->features;
7204 netdev->hw_features |= NETIF_F_RXFCS;
7205 netdev->priv_flags |= IFF_SUPP_NOFCS;
7206 netdev->hw_features |= NETIF_F_RXALL;
7207
7208 if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER)
7209 netdev->features |= NETIF_F_HW_VLAN_CTAG_FILTER;
7210
7211 netdev->vlan_features |= (NETIF_F_SG |
7212 NETIF_F_TSO |
7213 NETIF_F_TSO6 |
7214 NETIF_F_HW_CSUM);
7215
7216 netdev->priv_flags |= IFF_UNICAST_FLT;
7217
7218 if (pci_using_dac) {
7219 netdev->features |= NETIF_F_HIGHDMA;
7220 netdev->vlan_features |= NETIF_F_HIGHDMA;
7221 }
7222
7223 /* MTU range: 68 - max_hw_frame_size */
7224 netdev->min_mtu = ETH_MIN_MTU;
7225 netdev->max_mtu = adapter->max_hw_frame_size -
7226 (VLAN_ETH_HLEN + ETH_FCS_LEN);
7227
7228 if (e1000e_enable_mng_pass_thru(&adapter->hw))
7229 adapter->flags |= FLAG_MNG_PT_ENABLED;
7230
7231 /* before reading the NVM, reset the controller to
7232 * put the device in a known good starting state
7233 */
7234 adapter->hw.mac.ops.reset_hw(&adapter->hw);
7235
7236 /* systems with ASPM and others may see the checksum fail on the first
7237 * attempt. Let's give it a few tries
7238 */
7239 for (i = 0;; i++) {
7240 if (e1000_validate_nvm_checksum(&adapter->hw) >= 0)
7241 break;
7242 if (i == 2) {
7243 dev_err(&pdev->dev, "The NVM Checksum Is Not Valid\n");
7244 err = -EIO;
7245 goto err_eeprom;
7246 }
7247 }
7248
7249 e1000_eeprom_checks(adapter);
7250
7251 /* copy the MAC address */
7252 if (e1000e_read_mac_addr(&adapter->hw))
7253 dev_err(&pdev->dev,
7254 "NVM Read Error while reading MAC address\n");
7255
7256 memcpy(netdev->dev_addr, adapter->hw.mac.addr, netdev->addr_len);
7257
7258 if (!is_valid_ether_addr(netdev->dev_addr)) {
7259 dev_err(&pdev->dev, "Invalid MAC Address: %pM\n",
7260 netdev->dev_addr);
7261 err = -EIO;
7262 goto err_eeprom;
7263 }
7264
7265 timer_setup(&adapter->watchdog_timer, e1000_watchdog, 0);
7266 timer_setup(&adapter->phy_info_timer, e1000_update_phy_info, 0);
7267
7268 INIT_WORK(&adapter->reset_task, e1000_reset_task);
7269 INIT_WORK(&adapter->watchdog_task, e1000_watchdog_task);
7270 INIT_WORK(&adapter->downshift_task, e1000e_downshift_workaround);
7271 INIT_WORK(&adapter->update_phy_task, e1000e_update_phy_task);
7272 INIT_WORK(&adapter->print_hang_task, e1000_print_hw_hang);
7273
7274 /* Initialize link parameters. User can change them with ethtool */
7275 adapter->hw.mac.autoneg = 1;
7276 adapter->fc_autoneg = true;
7277 adapter->hw.fc.requested_mode = e1000_fc_default;
7278 adapter->hw.fc.current_mode = e1000_fc_default;
7279 adapter->hw.phy.autoneg_advertised = 0x2f;
7280
7281 /* Initial Wake on LAN setting - If APM wake is enabled in
7282 * the EEPROM, enable the ACPI Magic Packet filter
7283 */
7284 if (adapter->flags & FLAG_APME_IN_WUC) {
7285 /* APME bit in EEPROM is mapped to WUC.APME */
7286 eeprom_data = er32(WUC);
7287 eeprom_apme_mask = E1000_WUC_APME;
7288 if ((hw->mac.type > e1000_ich10lan) &&
7289 (eeprom_data & E1000_WUC_PHY_WAKE))
7290 adapter->flags2 |= FLAG2_HAS_PHY_WAKEUP;
7291 } else if (adapter->flags & FLAG_APME_IN_CTRL3) {
7292 if (adapter->flags & FLAG_APME_CHECK_PORT_B &&
7293 (adapter->hw.bus.func == 1))
7294 ret_val = e1000_read_nvm(&adapter->hw,
7295 NVM_INIT_CONTROL3_PORT_B,
7296 1, &eeprom_data);
7297 else
7298 ret_val = e1000_read_nvm(&adapter->hw,
7299 NVM_INIT_CONTROL3_PORT_A,
7300 1, &eeprom_data);
7301 }
7302
7303 /* fetch WoL from EEPROM */
7304 if (ret_val)
7305 e_dbg("NVM read error getting WoL initial values: %d\n", ret_val);
7306 else if (eeprom_data & eeprom_apme_mask)
7307 adapter->eeprom_wol |= E1000_WUFC_MAG;
7308
7309 /* now that we have the eeprom settings, apply the special cases
7310 * where the eeprom may be wrong or the board simply won't support
7311 * wake on lan on a particular port
7312 */
7313 if (!(adapter->flags & FLAG_HAS_WOL))
7314 adapter->eeprom_wol = 0;
7315
7316 /* initialize the wol settings based on the eeprom settings */
7317 adapter->wol = adapter->eeprom_wol;
7318
7319 /* make sure adapter isn't asleep if manageability is enabled */
7320 if (adapter->wol || (adapter->flags & FLAG_MNG_PT_ENABLED) ||
7321 (hw->mac.ops.check_mng_mode(hw)))
7322 device_wakeup_enable(&pdev->dev);
7323
7324 /* save off EEPROM version number */
7325 ret_val = e1000_read_nvm(&adapter->hw, 5, 1, &adapter->eeprom_vers);
7326
7327 if (ret_val) {
7328 e_dbg("NVM read error getting EEPROM version: %d\n", ret_val);
7329 adapter->eeprom_vers = 0;
7330 }
7331
7332 /* init PTP hardware clock */
7333 e1000e_ptp_init(adapter);
7334
7335 /* reset the hardware with the new settings */
7336 e1000e_reset(adapter);
7337
7338 /* If the controller has AMT, do not set DRV_LOAD until the interface
7339 * is up. For all other cases, let the f/w know that the h/w is now
7340 * under the control of the driver.
7341 */
7342 if (!(adapter->flags & FLAG_HAS_AMT))
7343 e1000e_get_hw_control(adapter);
7344
7345 strlcpy(netdev->name, "eth%d", sizeof(netdev->name));
7346 err = register_netdev(netdev);
7347 if (err)
7348 goto err_register;
7349
7350 /* carrier off reporting is important to ethtool even BEFORE open */
7351 netif_carrier_off(netdev);
7352
7353 e1000_print_device_info(adapter);
7354
7355 if (pci_dev_run_wake(pdev))
7356 pm_runtime_put_noidle(&pdev->dev);
7357
7358 return 0;
7359
7360err_register:
7361 if (!(adapter->flags & FLAG_HAS_AMT))
7362 e1000e_release_hw_control(adapter);
7363err_eeprom:
7364 if (hw->phy.ops.check_reset_block && !hw->phy.ops.check_reset_block(hw))
7365 e1000_phy_hw_reset(&adapter->hw);
7366err_hw_init:
7367 kfree(adapter->tx_ring);
7368 kfree(adapter->rx_ring);
7369err_sw_init:
7370 if ((adapter->hw.flash_address) && (hw->mac.type < e1000_pch_spt))
7371 iounmap(adapter->hw.flash_address);
7372 e1000e_reset_interrupt_capability(adapter);
7373err_flashmap:
7374 iounmap(adapter->hw.hw_addr);
7375err_ioremap:
7376 free_netdev(netdev);
7377err_alloc_etherdev:
7378 pci_release_mem_regions(pdev);
7379err_pci_reg:
7380err_dma:
7381 pci_disable_device(pdev);
7382 return err;
7383}
7384
7385/**
7386 * e1000_remove - Device Removal Routine
7387 * @pdev: PCI device information struct
7388 *
7389 * e1000_remove is called by the PCI subsystem to alert the driver
7390 * that it should release a PCI device. The could be caused by a
7391 * Hot-Plug event, or because the driver is going to be removed from
7392 * memory.
7393 **/
7394static void e1000_remove(struct pci_dev *pdev)
7395{
7396 struct net_device *netdev = pci_get_drvdata(pdev);
7397 struct e1000_adapter *adapter = netdev_priv(netdev);
7398 bool down = test_bit(__E1000_DOWN, &adapter->state);
7399
7400 e1000e_ptp_remove(adapter);
7401
7402 /* The timers may be rescheduled, so explicitly disable them
7403 * from being rescheduled.
7404 */
7405 if (!down)
7406 set_bit(__E1000_DOWN, &adapter->state);
7407 del_timer_sync(&adapter->watchdog_timer);
7408 del_timer_sync(&adapter->phy_info_timer);
7409
7410 cancel_work_sync(&adapter->reset_task);
7411 cancel_work_sync(&adapter->watchdog_task);
7412 cancel_work_sync(&adapter->downshift_task);
7413 cancel_work_sync(&adapter->update_phy_task);
7414 cancel_work_sync(&adapter->print_hang_task);
7415
7416 if (adapter->flags & FLAG_HAS_HW_TIMESTAMP) {
7417 cancel_work_sync(&adapter->tx_hwtstamp_work);
7418 if (adapter->tx_hwtstamp_skb) {
7419 dev_consume_skb_any(adapter->tx_hwtstamp_skb);
7420 adapter->tx_hwtstamp_skb = NULL;
7421 }
7422 }
7423
7424 /* Don't lie to e1000_close() down the road. */
7425 if (!down)
7426 clear_bit(__E1000_DOWN, &adapter->state);
7427 unregister_netdev(netdev);
7428
7429 if (pci_dev_run_wake(pdev))
7430 pm_runtime_get_noresume(&pdev->dev);
7431
7432 /* Release control of h/w to f/w. If f/w is AMT enabled, this
7433 * would have already happened in close and is redundant.
7434 */
7435 e1000e_release_hw_control(adapter);
7436
7437 e1000e_reset_interrupt_capability(adapter);
7438 kfree(adapter->tx_ring);
7439 kfree(adapter->rx_ring);
7440
7441 iounmap(adapter->hw.hw_addr);
7442 if ((adapter->hw.flash_address) &&
7443 (adapter->hw.mac.type < e1000_pch_spt))
7444 iounmap(adapter->hw.flash_address);
7445 pci_release_mem_regions(pdev);
7446
7447 free_netdev(netdev);
7448
7449 /* AER disable */
7450 pci_disable_pcie_error_reporting(pdev);
7451
7452 pci_disable_device(pdev);
7453}
7454
7455/* PCI Error Recovery (ERS) */
7456static const struct pci_error_handlers e1000_err_handler = {
7457 .error_detected = e1000_io_error_detected,
7458 .slot_reset = e1000_io_slot_reset,
7459 .resume = e1000_io_resume,
7460};
7461
7462static const struct pci_device_id e1000_pci_tbl[] = {
7463 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_COPPER), board_82571 },
7464 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_FIBER), board_82571 },
7465 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_COPPER), board_82571 },
7466 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_COPPER_LP),
7467 board_82571 },
7468 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_FIBER), board_82571 },
7469 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_SERDES), board_82571 },
7470 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_SERDES_DUAL), board_82571 },
7471 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_SERDES_QUAD), board_82571 },
7472 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571PT_QUAD_COPPER), board_82571 },
7473
7474 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI), board_82572 },
7475 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI_COPPER), board_82572 },
7476 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI_FIBER), board_82572 },
7477 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI_SERDES), board_82572 },
7478
7479 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82573E), board_82573 },
7480 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82573E_IAMT), board_82573 },
7481 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82573L), board_82573 },
7482
7483 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82574L), board_82574 },
7484 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82574LA), board_82574 },
7485 { PCI_VDEVICE(INTEL, E1000_DEV_ID_82583V), board_82583 },
7486
7487 { PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_COPPER_DPT),
7488 board_80003es2lan },
7489 { PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_COPPER_SPT),
7490 board_80003es2lan },
7491 { PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_SERDES_DPT),
7492 board_80003es2lan },
7493 { PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_SERDES_SPT),
7494 board_80003es2lan },
7495
7496 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IFE), board_ich8lan },
7497 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IFE_G), board_ich8lan },
7498 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IFE_GT), board_ich8lan },
7499 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_AMT), board_ich8lan },
7500 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_C), board_ich8lan },
7501 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_M), board_ich8lan },
7502 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_M_AMT), board_ich8lan },
7503 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_82567V_3), board_ich8lan },
7504
7505 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IFE), board_ich9lan },
7506 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IFE_G), board_ich9lan },
7507 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IFE_GT), board_ich9lan },
7508 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_AMT), board_ich9lan },
7509 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_C), board_ich9lan },
7510 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_BM), board_ich9lan },
7511 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_M), board_ich9lan },
7512 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_M_AMT), board_ich9lan },
7513 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_M_V), board_ich9lan },
7514
7515 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_R_BM_LM), board_ich9lan },
7516 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_R_BM_LF), board_ich9lan },
7517 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_R_BM_V), board_ich9lan },
7518
7519 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_D_BM_LM), board_ich10lan },
7520 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_D_BM_LF), board_ich10lan },
7521 { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_D_BM_V), board_ich10lan },
7522
7523 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_M_HV_LM), board_pchlan },
7524 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_M_HV_LC), board_pchlan },
7525 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_D_HV_DM), board_pchlan },
7526 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_D_HV_DC), board_pchlan },
7527
7528 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH2_LV_LM), board_pch2lan },
7529 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH2_LV_V), board_pch2lan },
7530
7531 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_LPT_I217_LM), board_pch_lpt },
7532 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_LPT_I217_V), board_pch_lpt },
7533 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_LPTLP_I218_LM), board_pch_lpt },
7534 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_LPTLP_I218_V), board_pch_lpt },
7535 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_I218_LM2), board_pch_lpt },
7536 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_I218_V2), board_pch_lpt },
7537 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_I218_LM3), board_pch_lpt },
7538 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_I218_V3), board_pch_lpt },
7539 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_SPT_I219_LM), board_pch_spt },
7540 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_SPT_I219_V), board_pch_spt },
7541 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_SPT_I219_LM2), board_pch_spt },
7542 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_SPT_I219_V2), board_pch_spt },
7543 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_LBG_I219_LM3), board_pch_spt },
7544 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_SPT_I219_LM4), board_pch_spt },
7545 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_SPT_I219_V4), board_pch_spt },
7546 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_SPT_I219_LM5), board_pch_spt },
7547 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_SPT_I219_V5), board_pch_spt },
7548 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_CNP_I219_LM6), board_pch_cnp },
7549 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_CNP_I219_V6), board_pch_cnp },
7550 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_CNP_I219_LM7), board_pch_cnp },
7551 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_CNP_I219_V7), board_pch_cnp },
7552 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_ICP_I219_LM8), board_pch_cnp },
7553 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_ICP_I219_V8), board_pch_cnp },
7554 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_ICP_I219_LM9), board_pch_cnp },
7555 { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_ICP_I219_V9), board_pch_cnp },
7556
7557 { 0, 0, 0, 0, 0, 0, 0 } /* terminate list */
7558};
7559MODULE_DEVICE_TABLE(pci, e1000_pci_tbl);
7560
7561static const struct dev_pm_ops e1000_pm_ops = {
7562#ifdef CONFIG_PM_SLEEP
7563 .suspend = e1000e_pm_suspend,
7564 .resume = e1000e_pm_resume,
7565 .freeze = e1000e_pm_freeze,
7566 .thaw = e1000e_pm_thaw,
7567 .poweroff = e1000e_pm_suspend,
7568 .restore = e1000e_pm_resume,
7569#endif
7570 SET_RUNTIME_PM_OPS(e1000e_pm_runtime_suspend, e1000e_pm_runtime_resume,
7571 e1000e_pm_runtime_idle)
7572};
7573
7574/* PCI Device API Driver */
7575static struct pci_driver e1000_driver = {
7576 .name = e1000e_driver_name,
7577 .id_table = e1000_pci_tbl,
7578 .probe = e1000_probe,
7579 .remove = e1000_remove,
7580 .driver = {
7581 .pm = &e1000_pm_ops,
7582 },
7583 .shutdown = e1000_shutdown,
7584 .err_handler = &e1000_err_handler
7585};
7586
7587/**
7588 * e1000_init_module - Driver Registration Routine
7589 *
7590 * e1000_init_module is the first routine called when the driver is
7591 * loaded. All it does is register with the PCI subsystem.
7592 **/
7593static int __init e1000_init_module(void)
7594{
7595 pr_info("Intel(R) PRO/1000 Network Driver - %s\n",
7596 e1000e_driver_version);
7597 pr_info("Copyright(c) 1999 - 2015 Intel Corporation.\n");
7598
7599 return pci_register_driver(&e1000_driver);
7600}
7601module_init(e1000_init_module);
7602
7603/**
7604 * e1000_exit_module - Driver Exit Cleanup Routine
7605 *
7606 * e1000_exit_module is called just before the driver is removed
7607 * from memory.
7608 **/
7609static void __exit e1000_exit_module(void)
7610{
7611 pci_unregister_driver(&e1000_driver);
7612}
7613module_exit(e1000_exit_module);
7614
7615MODULE_AUTHOR("Intel Corporation, <linux.nics@intel.com>");
7616MODULE_DESCRIPTION("Intel(R) PRO/1000 Network Driver");
7617MODULE_LICENSE("GPL");
7618MODULE_VERSION(DRV_VERSION);
7619
7620/* netdev.c */