Loading...
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Copyright (C) 2016 T-Platforms. All Rights Reserved.
4 *
5 * IDT PCIe-switch NTB Linux driver
6 *
7 * Contact Information:
8 * Serge Semin <fancer.lancer@gmail.com>, <Sergey.Semin@t-platforms.ru>
9 */
10/*
11 * NOTE of the IDT 89HPESx SMBus-slave interface driver
12 * This driver primarily is developed to have an access to EEPROM device of
13 * IDT PCIe-switches. IDT provides a simple SMBus interface to perform IO-
14 * operations from/to EEPROM, which is located at private (so called Master)
15 * SMBus of switches. Using that interface this the driver creates a simple
16 * binary sysfs-file in the device directory:
17 * /sys/bus/i2c/devices/<bus>-<devaddr>/eeprom
18 * In case if read-only flag is specified in the dts-node of device desription,
19 * User-space applications won't be able to write to the EEPROM sysfs-node.
20 * Additionally IDT 89HPESx SMBus interface has an ability to write/read
21 * data of device CSRs. This driver exposes debugf-file to perform simple IO
22 * operations using that ability for just basic debug purpose. Particularly
23 * next file is created in the specific debugfs-directory:
24 * /sys/kernel/debug/idt_csr/
25 * Format of the debugfs-node is:
26 * $ cat /sys/kernel/debug/idt_csr/<bus>-<devaddr>/<devname>;
27 * <CSR address>:<CSR value>
28 * So reading the content of the file gives current CSR address and it value.
29 * If User-space application wishes to change current CSR address,
30 * it can just write a proper value to the sysfs-file:
31 * $ echo "<CSR address>" > /sys/kernel/debug/idt_csr/<bus>-<devaddr>/<devname>
32 * If it wants to change the CSR value as well, the format of the write
33 * operation is:
34 * $ echo "<CSR address>:<CSR value>" > \
35 * /sys/kernel/debug/idt_csr/<bus>-<devaddr>/<devname>;
36 * CSR address and value can be any of hexadecimal, decimal or octal format.
37 */
38
39#include <linux/kernel.h>
40#include <linux/init.h>
41#include <linux/module.h>
42#include <linux/types.h>
43#include <linux/sizes.h>
44#include <linux/slab.h>
45#include <linux/mutex.h>
46#include <linux/sysfs.h>
47#include <linux/debugfs.h>
48#include <linux/mod_devicetable.h>
49#include <linux/property.h>
50#include <linux/i2c.h>
51#include <linux/pci_ids.h>
52#include <linux/delay.h>
53
54#define IDT_NAME "89hpesx"
55#define IDT_89HPESX_DESC "IDT 89HPESx SMBus-slave interface driver"
56#define IDT_89HPESX_VER "1.0"
57
58MODULE_DESCRIPTION(IDT_89HPESX_DESC);
59MODULE_VERSION(IDT_89HPESX_VER);
60MODULE_LICENSE("GPL v2");
61MODULE_AUTHOR("T-platforms");
62
63/*
64 * csr_dbgdir - CSR read/write operations Debugfs directory
65 */
66static struct dentry *csr_dbgdir;
67
68/*
69 * struct idt_89hpesx_dev - IDT 89HPESx device data structure
70 * @eesize: Size of EEPROM in bytes (calculated from "idt,eecompatible")
71 * @eero: EEPROM Read-only flag
72 * @eeaddr: EEPROM custom address
73 *
74 * @inieecmd: Initial cmd value for EEPROM read/write operations
75 * @inicsrcmd: Initial cmd value for CSR read/write operations
76 * @iniccode: Initialial command code value for IO-operations
77 *
78 * @csr: CSR address to perform read operation
79 *
80 * @smb_write: SMBus write method
81 * @smb_read: SMBus read method
82 * @smb_mtx: SMBus mutex
83 *
84 * @client: i2c client used to perform IO operations
85 *
86 * @ee_file: EEPROM read/write sysfs-file
87 */
88struct idt_smb_seq;
89struct idt_89hpesx_dev {
90 u32 eesize;
91 bool eero;
92 u8 eeaddr;
93
94 u8 inieecmd;
95 u8 inicsrcmd;
96 u8 iniccode;
97
98 u16 csr;
99
100 int (*smb_write)(struct idt_89hpesx_dev *, const struct idt_smb_seq *);
101 int (*smb_read)(struct idt_89hpesx_dev *, struct idt_smb_seq *);
102 struct mutex smb_mtx;
103
104 struct i2c_client *client;
105
106 struct bin_attribute *ee_file;
107 struct dentry *csr_dir;
108};
109
110/*
111 * struct idt_smb_seq - sequence of data to be read/written from/to IDT 89HPESx
112 * @ccode: SMBus command code
113 * @bytecnt: Byte count of operation
114 * @data: Data to by written
115 */
116struct idt_smb_seq {
117 u8 ccode;
118 u8 bytecnt;
119 u8 *data;
120};
121
122/*
123 * struct idt_eeprom_seq - sequence of data to be read/written from/to EEPROM
124 * @cmd: Transaction CMD
125 * @eeaddr: EEPROM custom address
126 * @memaddr: Internal memory address of EEPROM
127 * @data: Data to be written at the memory address
128 */
129struct idt_eeprom_seq {
130 u8 cmd;
131 u8 eeaddr;
132 u16 memaddr;
133 u8 data;
134} __packed;
135
136/*
137 * struct idt_csr_seq - sequence of data to be read/written from/to CSR
138 * @cmd: Transaction CMD
139 * @csraddr: Internal IDT device CSR address
140 * @data: Data to be read/written from/to the CSR address
141 */
142struct idt_csr_seq {
143 u8 cmd;
144 u16 csraddr;
145 u32 data;
146} __packed;
147
148/*
149 * SMBus command code macros
150 * @CCODE_END: Indicates the end of transaction
151 * @CCODE_START: Indicates the start of transaction
152 * @CCODE_CSR: CSR read/write transaction
153 * @CCODE_EEPROM: EEPROM read/write transaction
154 * @CCODE_BYTE: Supplied data has BYTE length
155 * @CCODE_WORD: Supplied data has WORD length
156 * @CCODE_BLOCK: Supplied data has variable length passed in bytecnt
157 * byte right following CCODE byte
158 */
159#define CCODE_END ((u8)0x01)
160#define CCODE_START ((u8)0x02)
161#define CCODE_CSR ((u8)0x00)
162#define CCODE_EEPROM ((u8)0x04)
163#define CCODE_BYTE ((u8)0x00)
164#define CCODE_WORD ((u8)0x20)
165#define CCODE_BLOCK ((u8)0x40)
166#define CCODE_PEC ((u8)0x80)
167
168/*
169 * EEPROM command macros
170 * @EEPROM_OP_WRITE: EEPROM write operation
171 * @EEPROM_OP_READ: EEPROM read operation
172 * @EEPROM_USA: Use specified address of EEPROM
173 * @EEPROM_NAERR: EEPROM device is not ready to respond
174 * @EEPROM_LAERR: EEPROM arbitration loss error
175 * @EEPROM_MSS: EEPROM misplace start & stop bits error
176 * @EEPROM_WR_CNT: Bytes count to perform write operation
177 * @EEPROM_WRRD_CNT: Bytes count to write before reading
178 * @EEPROM_RD_CNT: Bytes count to perform read operation
179 * @EEPROM_DEF_SIZE: Fall back size of EEPROM
180 * @EEPROM_DEF_ADDR: Defatul EEPROM address
181 * @EEPROM_TOUT: Timeout before retry read operation if eeprom is busy
182 */
183#define EEPROM_OP_WRITE ((u8)0x00)
184#define EEPROM_OP_READ ((u8)0x01)
185#define EEPROM_USA ((u8)0x02)
186#define EEPROM_NAERR ((u8)0x08)
187#define EEPROM_LAERR ((u8)0x10)
188#define EEPROM_MSS ((u8)0x20)
189#define EEPROM_WR_CNT ((u8)5)
190#define EEPROM_WRRD_CNT ((u8)4)
191#define EEPROM_RD_CNT ((u8)5)
192#define EEPROM_DEF_SIZE ((u16)4096)
193#define EEPROM_DEF_ADDR ((u8)0x50)
194#define EEPROM_TOUT (100)
195
196/*
197 * CSR command macros
198 * @CSR_DWE: Enable all four bytes of the operation
199 * @CSR_OP_WRITE: CSR write operation
200 * @CSR_OP_READ: CSR read operation
201 * @CSR_RERR: Read operation error
202 * @CSR_WERR: Write operation error
203 * @CSR_WR_CNT: Bytes count to perform write operation
204 * @CSR_WRRD_CNT: Bytes count to write before reading
205 * @CSR_RD_CNT: Bytes count to perform read operation
206 * @CSR_MAX: Maximum CSR address
207 * @CSR_DEF: Default CSR address
208 * @CSR_REAL_ADDR: CSR real unshifted address
209 */
210#define CSR_DWE ((u8)0x0F)
211#define CSR_OP_WRITE ((u8)0x00)
212#define CSR_OP_READ ((u8)0x10)
213#define CSR_RERR ((u8)0x40)
214#define CSR_WERR ((u8)0x80)
215#define CSR_WR_CNT ((u8)7)
216#define CSR_WRRD_CNT ((u8)3)
217#define CSR_RD_CNT ((u8)7)
218#define CSR_MAX ((u32)0x3FFFF)
219#define CSR_DEF ((u16)0x0000)
220#define CSR_REAL_ADDR(val) ((unsigned int)val << 2)
221
222/*
223 * IDT 89HPESx basic register
224 * @IDT_VIDDID_CSR: PCIe VID and DID of IDT 89HPESx
225 * @IDT_VID_MASK: Mask of VID
226 */
227#define IDT_VIDDID_CSR ((u32)0x0000)
228#define IDT_VID_MASK ((u32)0xFFFF)
229
230/*
231 * IDT 89HPESx can send NACK when new command is sent before previous one
232 * fininshed execution. In this case driver retries operation
233 * certain times.
234 * @RETRY_CNT: Number of retries before giving up and fail
235 * @idt_smb_safe: Generate a retry loop on corresponding SMBus method
236 */
237#define RETRY_CNT (128)
238#define idt_smb_safe(ops, args...) ({ \
239 int __retry = RETRY_CNT; \
240 s32 __sts; \
241 do { \
242 __sts = i2c_smbus_ ## ops ## _data(args); \
243 } while (__retry-- && __sts < 0); \
244 __sts; \
245})
246
247/*===========================================================================
248 * i2c bus level IO-operations
249 *===========================================================================
250 */
251
252/*
253 * idt_smb_write_byte() - SMBus write method when I2C_SMBUS_BYTE_DATA operation
254 * is only available
255 * @pdev: Pointer to the driver data
256 * @seq: Sequence of data to be written
257 */
258static int idt_smb_write_byte(struct idt_89hpesx_dev *pdev,
259 const struct idt_smb_seq *seq)
260{
261 s32 sts;
262 u8 ccode;
263 int idx;
264
265 /* Loop over the supplied data sending byte one-by-one */
266 for (idx = 0; idx < seq->bytecnt; idx++) {
267 /* Collect the command code byte */
268 ccode = seq->ccode | CCODE_BYTE;
269 if (idx == 0)
270 ccode |= CCODE_START;
271 if (idx == seq->bytecnt - 1)
272 ccode |= CCODE_END;
273
274 /* Send data to the device */
275 sts = idt_smb_safe(write_byte, pdev->client, ccode,
276 seq->data[idx]);
277 if (sts != 0)
278 return (int)sts;
279 }
280
281 return 0;
282}
283
284/*
285 * idt_smb_read_byte() - SMBus read method when I2C_SMBUS_BYTE_DATA operation
286 * is only available
287 * @pdev: Pointer to the driver data
288 * @seq: Buffer to read data to
289 */
290static int idt_smb_read_byte(struct idt_89hpesx_dev *pdev,
291 struct idt_smb_seq *seq)
292{
293 s32 sts;
294 u8 ccode;
295 int idx;
296
297 /* Loop over the supplied buffer receiving byte one-by-one */
298 for (idx = 0; idx < seq->bytecnt; idx++) {
299 /* Collect the command code byte */
300 ccode = seq->ccode | CCODE_BYTE;
301 if (idx == 0)
302 ccode |= CCODE_START;
303 if (idx == seq->bytecnt - 1)
304 ccode |= CCODE_END;
305
306 /* Read data from the device */
307 sts = idt_smb_safe(read_byte, pdev->client, ccode);
308 if (sts < 0)
309 return (int)sts;
310
311 seq->data[idx] = (u8)sts;
312 }
313
314 return 0;
315}
316
317/*
318 * idt_smb_write_word() - SMBus write method when I2C_SMBUS_BYTE_DATA and
319 * I2C_FUNC_SMBUS_WORD_DATA operations are available
320 * @pdev: Pointer to the driver data
321 * @seq: Sequence of data to be written
322 */
323static int idt_smb_write_word(struct idt_89hpesx_dev *pdev,
324 const struct idt_smb_seq *seq)
325{
326 s32 sts;
327 u8 ccode;
328 int idx, evencnt;
329
330 /* Calculate the even count of data to send */
331 evencnt = seq->bytecnt - (seq->bytecnt % 2);
332
333 /* Loop over the supplied data sending two bytes at a time */
334 for (idx = 0; idx < evencnt; idx += 2) {
335 /* Collect the command code byte */
336 ccode = seq->ccode | CCODE_WORD;
337 if (idx == 0)
338 ccode |= CCODE_START;
339 if (idx == evencnt - 2)
340 ccode |= CCODE_END;
341
342 /* Send word data to the device */
343 sts = idt_smb_safe(write_word, pdev->client, ccode,
344 *(u16 *)&seq->data[idx]);
345 if (sts != 0)
346 return (int)sts;
347 }
348
349 /* If there is odd number of bytes then send just one last byte */
350 if (seq->bytecnt != evencnt) {
351 /* Collect the command code byte */
352 ccode = seq->ccode | CCODE_BYTE | CCODE_END;
353 if (idx == 0)
354 ccode |= CCODE_START;
355
356 /* Send byte data to the device */
357 sts = idt_smb_safe(write_byte, pdev->client, ccode,
358 seq->data[idx]);
359 if (sts != 0)
360 return (int)sts;
361 }
362
363 return 0;
364}
365
366/*
367 * idt_smb_read_word() - SMBus read method when I2C_SMBUS_BYTE_DATA and
368 * I2C_FUNC_SMBUS_WORD_DATA operations are available
369 * @pdev: Pointer to the driver data
370 * @seq: Buffer to read data to
371 */
372static int idt_smb_read_word(struct idt_89hpesx_dev *pdev,
373 struct idt_smb_seq *seq)
374{
375 s32 sts;
376 u8 ccode;
377 int idx, evencnt;
378
379 /* Calculate the even count of data to send */
380 evencnt = seq->bytecnt - (seq->bytecnt % 2);
381
382 /* Loop over the supplied data reading two bytes at a time */
383 for (idx = 0; idx < evencnt; idx += 2) {
384 /* Collect the command code byte */
385 ccode = seq->ccode | CCODE_WORD;
386 if (idx == 0)
387 ccode |= CCODE_START;
388 if (idx == evencnt - 2)
389 ccode |= CCODE_END;
390
391 /* Read word data from the device */
392 sts = idt_smb_safe(read_word, pdev->client, ccode);
393 if (sts < 0)
394 return (int)sts;
395
396 *(u16 *)&seq->data[idx] = (u16)sts;
397 }
398
399 /* If there is odd number of bytes then receive just one last byte */
400 if (seq->bytecnt != evencnt) {
401 /* Collect the command code byte */
402 ccode = seq->ccode | CCODE_BYTE | CCODE_END;
403 if (idx == 0)
404 ccode |= CCODE_START;
405
406 /* Read last data byte from the device */
407 sts = idt_smb_safe(read_byte, pdev->client, ccode);
408 if (sts < 0)
409 return (int)sts;
410
411 seq->data[idx] = (u8)sts;
412 }
413
414 return 0;
415}
416
417/*
418 * idt_smb_write_block() - SMBus write method when I2C_SMBUS_BLOCK_DATA
419 * operation is available
420 * @pdev: Pointer to the driver data
421 * @seq: Sequence of data to be written
422 */
423static int idt_smb_write_block(struct idt_89hpesx_dev *pdev,
424 const struct idt_smb_seq *seq)
425{
426 u8 ccode;
427
428 /* Return error if too much data passed to send */
429 if (seq->bytecnt > I2C_SMBUS_BLOCK_MAX)
430 return -EINVAL;
431
432 /* Collect the command code byte */
433 ccode = seq->ccode | CCODE_BLOCK | CCODE_START | CCODE_END;
434
435 /* Send block of data to the device */
436 return idt_smb_safe(write_block, pdev->client, ccode, seq->bytecnt,
437 seq->data);
438}
439
440/*
441 * idt_smb_read_block() - SMBus read method when I2C_SMBUS_BLOCK_DATA
442 * operation is available
443 * @pdev: Pointer to the driver data
444 * @seq: Buffer to read data to
445 */
446static int idt_smb_read_block(struct idt_89hpesx_dev *pdev,
447 struct idt_smb_seq *seq)
448{
449 s32 sts;
450 u8 ccode;
451
452 /* Return error if too much data passed to send */
453 if (seq->bytecnt > I2C_SMBUS_BLOCK_MAX)
454 return -EINVAL;
455
456 /* Collect the command code byte */
457 ccode = seq->ccode | CCODE_BLOCK | CCODE_START | CCODE_END;
458
459 /* Read block of data from the device */
460 sts = idt_smb_safe(read_block, pdev->client, ccode, seq->data);
461 if (sts != seq->bytecnt)
462 return (sts < 0 ? sts : -ENODATA);
463
464 return 0;
465}
466
467/*
468 * idt_smb_write_i2c_block() - SMBus write method when I2C_SMBUS_I2C_BLOCK_DATA
469 * operation is available
470 * @pdev: Pointer to the driver data
471 * @seq: Sequence of data to be written
472 *
473 * NOTE It's usual SMBus write block operation, except the actual data length is
474 * sent as first byte of data
475 */
476static int idt_smb_write_i2c_block(struct idt_89hpesx_dev *pdev,
477 const struct idt_smb_seq *seq)
478{
479 u8 ccode, buf[I2C_SMBUS_BLOCK_MAX + 1];
480
481 /* Return error if too much data passed to send */
482 if (seq->bytecnt > I2C_SMBUS_BLOCK_MAX)
483 return -EINVAL;
484
485 /* Collect the data to send. Length byte must be added prior the data */
486 buf[0] = seq->bytecnt;
487 memcpy(&buf[1], seq->data, seq->bytecnt);
488
489 /* Collect the command code byte */
490 ccode = seq->ccode | CCODE_BLOCK | CCODE_START | CCODE_END;
491
492 /* Send length and block of data to the device */
493 return idt_smb_safe(write_i2c_block, pdev->client, ccode,
494 seq->bytecnt + 1, buf);
495}
496
497/*
498 * idt_smb_read_i2c_block() - SMBus read method when I2C_SMBUS_I2C_BLOCK_DATA
499 * operation is available
500 * @pdev: Pointer to the driver data
501 * @seq: Buffer to read data to
502 *
503 * NOTE It's usual SMBus read block operation, except the actual data length is
504 * retrieved as first byte of data
505 */
506static int idt_smb_read_i2c_block(struct idt_89hpesx_dev *pdev,
507 struct idt_smb_seq *seq)
508{
509 u8 ccode, buf[I2C_SMBUS_BLOCK_MAX + 1];
510 s32 sts;
511
512 /* Return error if too much data passed to send */
513 if (seq->bytecnt > I2C_SMBUS_BLOCK_MAX)
514 return -EINVAL;
515
516 /* Collect the command code byte */
517 ccode = seq->ccode | CCODE_BLOCK | CCODE_START | CCODE_END;
518
519 /* Read length and block of data from the device */
520 sts = idt_smb_safe(read_i2c_block, pdev->client, ccode,
521 seq->bytecnt + 1, buf);
522 if (sts != seq->bytecnt + 1)
523 return (sts < 0 ? sts : -ENODATA);
524 if (buf[0] != seq->bytecnt)
525 return -ENODATA;
526
527 /* Copy retrieved data to the output data buffer */
528 memcpy(seq->data, &buf[1], seq->bytecnt);
529
530 return 0;
531}
532
533/*===========================================================================
534 * EEPROM IO-operations
535 *===========================================================================
536 */
537
538/*
539 * idt_eeprom_read_byte() - read just one byte from EEPROM
540 * @pdev: Pointer to the driver data
541 * @memaddr: Start EEPROM memory address
542 * @data: Data to be written to EEPROM
543 */
544static int idt_eeprom_read_byte(struct idt_89hpesx_dev *pdev, u16 memaddr,
545 u8 *data)
546{
547 struct device *dev = &pdev->client->dev;
548 struct idt_eeprom_seq eeseq;
549 struct idt_smb_seq smbseq;
550 int ret, retry;
551
552 /* Initialize SMBus sequence fields */
553 smbseq.ccode = pdev->iniccode | CCODE_EEPROM;
554 smbseq.data = (u8 *)&eeseq;
555
556 /*
557 * Sometimes EEPROM may respond with NACK if it's busy with previous
558 * operation, so we need to perform a few attempts of read cycle
559 */
560 retry = RETRY_CNT;
561 do {
562 /* Send EEPROM memory address to read data from */
563 smbseq.bytecnt = EEPROM_WRRD_CNT;
564 eeseq.cmd = pdev->inieecmd | EEPROM_OP_READ;
565 eeseq.eeaddr = pdev->eeaddr;
566 eeseq.memaddr = cpu_to_le16(memaddr);
567 ret = pdev->smb_write(pdev, &smbseq);
568 if (ret != 0) {
569 dev_err(dev, "Failed to init eeprom addr 0x%02x",
570 memaddr);
571 break;
572 }
573
574 /* Perform read operation */
575 smbseq.bytecnt = EEPROM_RD_CNT;
576 ret = pdev->smb_read(pdev, &smbseq);
577 if (ret != 0) {
578 dev_err(dev, "Failed to read eeprom data 0x%02x",
579 memaddr);
580 break;
581 }
582
583 /* Restart read operation if the device is busy */
584 if (retry && (eeseq.cmd & EEPROM_NAERR)) {
585 dev_dbg(dev, "EEPROM busy, retry reading after %d ms",
586 EEPROM_TOUT);
587 msleep(EEPROM_TOUT);
588 continue;
589 }
590
591 /* Check whether IDT successfully read data from EEPROM */
592 if (eeseq.cmd & (EEPROM_NAERR | EEPROM_LAERR | EEPROM_MSS)) {
593 dev_err(dev,
594 "Communication with eeprom failed, cmd 0x%hhx",
595 eeseq.cmd);
596 ret = -EREMOTEIO;
597 break;
598 }
599
600 /* Save retrieved data and exit the loop */
601 *data = eeseq.data;
602 break;
603 } while (retry--);
604
605 /* Return the status of operation */
606 return ret;
607}
608
609/*
610 * idt_eeprom_write() - EEPROM write operation
611 * @pdev: Pointer to the driver data
612 * @memaddr: Start EEPROM memory address
613 * @len: Length of data to be written
614 * @data: Data to be written to EEPROM
615 */
616static int idt_eeprom_write(struct idt_89hpesx_dev *pdev, u16 memaddr, u16 len,
617 const u8 *data)
618{
619 struct device *dev = &pdev->client->dev;
620 struct idt_eeprom_seq eeseq;
621 struct idt_smb_seq smbseq;
622 int ret;
623 u16 idx;
624
625 /* Initialize SMBus sequence fields */
626 smbseq.ccode = pdev->iniccode | CCODE_EEPROM;
627 smbseq.data = (u8 *)&eeseq;
628
629 /* Send data byte-by-byte, checking if it is successfully written */
630 for (idx = 0; idx < len; idx++, memaddr++) {
631 /* Lock IDT SMBus device */
632 mutex_lock(&pdev->smb_mtx);
633
634 /* Perform write operation */
635 smbseq.bytecnt = EEPROM_WR_CNT;
636 eeseq.cmd = pdev->inieecmd | EEPROM_OP_WRITE;
637 eeseq.eeaddr = pdev->eeaddr;
638 eeseq.memaddr = cpu_to_le16(memaddr);
639 eeseq.data = data[idx];
640 ret = pdev->smb_write(pdev, &smbseq);
641 if (ret != 0) {
642 dev_err(dev,
643 "Failed to write 0x%04hx:0x%02hhx to eeprom",
644 memaddr, data[idx]);
645 goto err_mutex_unlock;
646 }
647
648 /*
649 * Check whether the data is successfully written by reading
650 * from the same EEPROM memory address.
651 */
652 eeseq.data = ~data[idx];
653 ret = idt_eeprom_read_byte(pdev, memaddr, &eeseq.data);
654 if (ret != 0)
655 goto err_mutex_unlock;
656
657 /* Check whether the read byte is the same as written one */
658 if (eeseq.data != data[idx]) {
659 dev_err(dev, "Values don't match 0x%02hhx != 0x%02hhx",
660 eeseq.data, data[idx]);
661 ret = -EREMOTEIO;
662 goto err_mutex_unlock;
663 }
664
665 /* Unlock IDT SMBus device */
666err_mutex_unlock:
667 mutex_unlock(&pdev->smb_mtx);
668 if (ret != 0)
669 return ret;
670 }
671
672 return 0;
673}
674
675/*
676 * idt_eeprom_read() - EEPROM read operation
677 * @pdev: Pointer to the driver data
678 * @memaddr: Start EEPROM memory address
679 * @len: Length of data to read
680 * @buf: Buffer to read data to
681 */
682static int idt_eeprom_read(struct idt_89hpesx_dev *pdev, u16 memaddr, u16 len,
683 u8 *buf)
684{
685 int ret;
686 u16 idx;
687
688 /* Read data byte-by-byte, retrying if it wasn't successful */
689 for (idx = 0; idx < len; idx++, memaddr++) {
690 /* Lock IDT SMBus device */
691 mutex_lock(&pdev->smb_mtx);
692
693 /* Just read the byte to the buffer */
694 ret = idt_eeprom_read_byte(pdev, memaddr, &buf[idx]);
695
696 /* Unlock IDT SMBus device */
697 mutex_unlock(&pdev->smb_mtx);
698
699 /* Return error if read operation failed */
700 if (ret != 0)
701 return ret;
702 }
703
704 return 0;
705}
706
707/*===========================================================================
708 * CSR IO-operations
709 *===========================================================================
710 */
711
712/*
713 * idt_csr_write() - CSR write operation
714 * @pdev: Pointer to the driver data
715 * @csraddr: CSR address (with no two LS bits)
716 * @data: Data to be written to CSR
717 */
718static int idt_csr_write(struct idt_89hpesx_dev *pdev, u16 csraddr,
719 const u32 data)
720{
721 struct device *dev = &pdev->client->dev;
722 struct idt_csr_seq csrseq;
723 struct idt_smb_seq smbseq;
724 int ret;
725
726 /* Initialize SMBus sequence fields */
727 smbseq.ccode = pdev->iniccode | CCODE_CSR;
728 smbseq.data = (u8 *)&csrseq;
729
730 /* Lock IDT SMBus device */
731 mutex_lock(&pdev->smb_mtx);
732
733 /* Perform write operation */
734 smbseq.bytecnt = CSR_WR_CNT;
735 csrseq.cmd = pdev->inicsrcmd | CSR_OP_WRITE;
736 csrseq.csraddr = cpu_to_le16(csraddr);
737 csrseq.data = cpu_to_le32(data);
738 ret = pdev->smb_write(pdev, &smbseq);
739 if (ret != 0) {
740 dev_err(dev, "Failed to write 0x%04x: 0x%04x to csr",
741 CSR_REAL_ADDR(csraddr), data);
742 goto err_mutex_unlock;
743 }
744
745 /* Send CSR address to read data from */
746 smbseq.bytecnt = CSR_WRRD_CNT;
747 csrseq.cmd = pdev->inicsrcmd | CSR_OP_READ;
748 ret = pdev->smb_write(pdev, &smbseq);
749 if (ret != 0) {
750 dev_err(dev, "Failed to init csr address 0x%04x",
751 CSR_REAL_ADDR(csraddr));
752 goto err_mutex_unlock;
753 }
754
755 /* Perform read operation */
756 smbseq.bytecnt = CSR_RD_CNT;
757 ret = pdev->smb_read(pdev, &smbseq);
758 if (ret != 0) {
759 dev_err(dev, "Failed to read csr 0x%04x",
760 CSR_REAL_ADDR(csraddr));
761 goto err_mutex_unlock;
762 }
763
764 /* Check whether IDT successfully retrieved CSR data */
765 if (csrseq.cmd & (CSR_RERR | CSR_WERR)) {
766 dev_err(dev, "IDT failed to perform CSR r/w");
767 ret = -EREMOTEIO;
768 goto err_mutex_unlock;
769 }
770
771 /* Unlock IDT SMBus device */
772err_mutex_unlock:
773 mutex_unlock(&pdev->smb_mtx);
774
775 return ret;
776}
777
778/*
779 * idt_csr_read() - CSR read operation
780 * @pdev: Pointer to the driver data
781 * @csraddr: CSR address (with no two LS bits)
782 * @data: Data to be written to CSR
783 */
784static int idt_csr_read(struct idt_89hpesx_dev *pdev, u16 csraddr, u32 *data)
785{
786 struct device *dev = &pdev->client->dev;
787 struct idt_csr_seq csrseq;
788 struct idt_smb_seq smbseq;
789 int ret;
790
791 /* Initialize SMBus sequence fields */
792 smbseq.ccode = pdev->iniccode | CCODE_CSR;
793 smbseq.data = (u8 *)&csrseq;
794
795 /* Lock IDT SMBus device */
796 mutex_lock(&pdev->smb_mtx);
797
798 /* Send CSR register address before reading it */
799 smbseq.bytecnt = CSR_WRRD_CNT;
800 csrseq.cmd = pdev->inicsrcmd | CSR_OP_READ;
801 csrseq.csraddr = cpu_to_le16(csraddr);
802 ret = pdev->smb_write(pdev, &smbseq);
803 if (ret != 0) {
804 dev_err(dev, "Failed to init csr address 0x%04x",
805 CSR_REAL_ADDR(csraddr));
806 goto err_mutex_unlock;
807 }
808
809 /* Perform read operation */
810 smbseq.bytecnt = CSR_RD_CNT;
811 ret = pdev->smb_read(pdev, &smbseq);
812 if (ret != 0) {
813 dev_err(dev, "Failed to read csr 0x%04x",
814 CSR_REAL_ADDR(csraddr));
815 goto err_mutex_unlock;
816 }
817
818 /* Check whether IDT successfully retrieved CSR data */
819 if (csrseq.cmd & (CSR_RERR | CSR_WERR)) {
820 dev_err(dev, "IDT failed to perform CSR r/w");
821 ret = -EREMOTEIO;
822 goto err_mutex_unlock;
823 }
824
825 /* Save data retrieved from IDT */
826 *data = le32_to_cpu(csrseq.data);
827
828 /* Unlock IDT SMBus device */
829err_mutex_unlock:
830 mutex_unlock(&pdev->smb_mtx);
831
832 return ret;
833}
834
835/*===========================================================================
836 * Sysfs/debugfs-nodes IO-operations
837 *===========================================================================
838 */
839
840/*
841 * eeprom_write() - EEPROM sysfs-node write callback
842 * @filep: Pointer to the file system node
843 * @kobj: Pointer to the kernel object related to the sysfs-node
844 * @attr: Attributes of the file
845 * @buf: Buffer to write data to
846 * @off: Offset at which data should be written to
847 * @count: Number of bytes to write
848 */
849static ssize_t eeprom_write(struct file *filp, struct kobject *kobj,
850 struct bin_attribute *attr,
851 char *buf, loff_t off, size_t count)
852{
853 struct idt_89hpesx_dev *pdev;
854 int ret;
855
856 /* Retrieve driver data */
857 pdev = dev_get_drvdata(kobj_to_dev(kobj));
858
859 /* Perform EEPROM write operation */
860 ret = idt_eeprom_write(pdev, (u16)off, (u16)count, (u8 *)buf);
861 return (ret != 0 ? ret : count);
862}
863
864/*
865 * eeprom_read() - EEPROM sysfs-node read callback
866 * @filep: Pointer to the file system node
867 * @kobj: Pointer to the kernel object related to the sysfs-node
868 * @attr: Attributes of the file
869 * @buf: Buffer to write data to
870 * @off: Offset at which data should be written to
871 * @count: Number of bytes to write
872 */
873static ssize_t eeprom_read(struct file *filp, struct kobject *kobj,
874 struct bin_attribute *attr,
875 char *buf, loff_t off, size_t count)
876{
877 struct idt_89hpesx_dev *pdev;
878 int ret;
879
880 /* Retrieve driver data */
881 pdev = dev_get_drvdata(kobj_to_dev(kobj));
882
883 /* Perform EEPROM read operation */
884 ret = idt_eeprom_read(pdev, (u16)off, (u16)count, (u8 *)buf);
885 return (ret != 0 ? ret : count);
886}
887
888/*
889 * idt_dbgfs_csr_write() - CSR debugfs-node write callback
890 * @filep: Pointer to the file system file descriptor
891 * @buf: Buffer to read data from
892 * @count: Size of the buffer
893 * @offp: Offset within the file
894 *
895 * It accepts either "0x<reg addr>:0x<value>" for saving register address
896 * and writing value to specified DWORD register or "0x<reg addr>" for
897 * just saving register address in order to perform next read operation.
898 *
899 * WARNING No spaces are allowed. Incoming string must be strictly formated as:
900 * "<reg addr>:<value>". Register address must be aligned within 4 bytes
901 * (one DWORD).
902 */
903static ssize_t idt_dbgfs_csr_write(struct file *filep, const char __user *ubuf,
904 size_t count, loff_t *offp)
905{
906 struct idt_89hpesx_dev *pdev = filep->private_data;
907 char *colon_ch, *csraddr_str, *csrval_str;
908 int ret;
909 u32 csraddr, csrval;
910 char *buf;
911
912 if (*offp)
913 return 0;
914
915 /* Copy data from User-space */
916 buf = memdup_user_nul(ubuf, count);
917 if (IS_ERR(buf))
918 return PTR_ERR(buf);
919
920 /* Find position of colon in the buffer */
921 colon_ch = strnchr(buf, count, ':');
922
923 /*
924 * If there is colon passed then new CSR value should be parsed as
925 * well, so allocate buffer for CSR address substring.
926 * If no colon is found, then string must have just one number with
927 * no new CSR value
928 */
929 if (colon_ch != NULL) {
930 /* Copy the register address to the substring buffer */
931 csraddr_str = kmemdup_nul(buf, colon_ch - buf, GFP_KERNEL);
932 if (csraddr_str == NULL) {
933 ret = -ENOMEM;
934 goto free_buf;
935 }
936 /* Register value must follow the colon */
937 csrval_str = colon_ch + 1;
938 } else /* if (str_colon == NULL) */ {
939 csraddr_str = (char *)buf; /* Just to shut warning up */
940 csrval_str = NULL;
941 }
942
943 /* Convert CSR address to u32 value */
944 ret = kstrtou32(csraddr_str, 0, &csraddr);
945 if (ret != 0)
946 goto free_csraddr_str;
947
948 /* Check whether passed register address is valid */
949 if (csraddr > CSR_MAX || !IS_ALIGNED(csraddr, SZ_4)) {
950 ret = -EINVAL;
951 goto free_csraddr_str;
952 }
953
954 /* Shift register address to the right so to have u16 address */
955 pdev->csr = (csraddr >> 2);
956
957 /* Parse new CSR value and send it to IDT, if colon has been found */
958 if (colon_ch != NULL) {
959 ret = kstrtou32(csrval_str, 0, &csrval);
960 if (ret != 0)
961 goto free_csraddr_str;
962
963 ret = idt_csr_write(pdev, pdev->csr, csrval);
964 if (ret != 0)
965 goto free_csraddr_str;
966 }
967
968 /* Free memory only if colon has been found */
969free_csraddr_str:
970 if (colon_ch != NULL)
971 kfree(csraddr_str);
972
973 /* Free buffer allocated for data retrieved from User-space */
974free_buf:
975 kfree(buf);
976
977 return (ret != 0 ? ret : count);
978}
979
980/*
981 * idt_dbgfs_csr_read() - CSR debugfs-node read callback
982 * @filep: Pointer to the file system file descriptor
983 * @buf: Buffer to write data to
984 * @count: Size of the buffer
985 * @offp: Offset within the file
986 *
987 * It just prints the pair "0x<reg addr>:0x<value>" to passed buffer.
988 */
989#define CSRBUF_SIZE ((size_t)32)
990static ssize_t idt_dbgfs_csr_read(struct file *filep, char __user *ubuf,
991 size_t count, loff_t *offp)
992{
993 struct idt_89hpesx_dev *pdev = filep->private_data;
994 u32 csraddr, csrval;
995 char buf[CSRBUF_SIZE];
996 int ret, size;
997
998 /* Perform CSR read operation */
999 ret = idt_csr_read(pdev, pdev->csr, &csrval);
1000 if (ret != 0)
1001 return ret;
1002
1003 /* Shift register address to the left so to have real address */
1004 csraddr = ((u32)pdev->csr << 2);
1005
1006 /* Print the "0x<reg addr>:0x<value>" to buffer */
1007 size = snprintf(buf, CSRBUF_SIZE, "0x%05x:0x%08x\n",
1008 (unsigned int)csraddr, (unsigned int)csrval);
1009
1010 /* Copy data to User-space */
1011 return simple_read_from_buffer(ubuf, count, offp, buf, size);
1012}
1013
1014/*
1015 * eeprom_attribute - EEPROM sysfs-node attributes
1016 *
1017 * NOTE Size will be changed in compliance with OF node. EEPROM attribute will
1018 * be read-only as well if the corresponding flag is specified in OF node.
1019 */
1020static BIN_ATTR_RW(eeprom, EEPROM_DEF_SIZE);
1021
1022/*
1023 * csr_dbgfs_ops - CSR debugfs-node read/write operations
1024 */
1025static const struct file_operations csr_dbgfs_ops = {
1026 .owner = THIS_MODULE,
1027 .open = simple_open,
1028 .write = idt_dbgfs_csr_write,
1029 .read = idt_dbgfs_csr_read
1030};
1031
1032/*===========================================================================
1033 * Driver init/deinit methods
1034 *===========================================================================
1035 */
1036
1037/*
1038 * idt_set_defval() - disable EEPROM access by default
1039 * @pdev: Pointer to the driver data
1040 */
1041static void idt_set_defval(struct idt_89hpesx_dev *pdev)
1042{
1043 /* If OF info is missing then use next values */
1044 pdev->eesize = 0;
1045 pdev->eero = true;
1046 pdev->inieecmd = 0;
1047 pdev->eeaddr = 0;
1048}
1049
1050static const struct i2c_device_id ee_ids[];
1051
1052/*
1053 * idt_ee_match_id() - check whether the node belongs to compatible EEPROMs
1054 */
1055static const struct i2c_device_id *idt_ee_match_id(struct fwnode_handle *fwnode)
1056{
1057 const struct i2c_device_id *id = ee_ids;
1058 const char *compatible, *p;
1059 char devname[I2C_NAME_SIZE];
1060 int ret;
1061
1062 ret = fwnode_property_read_string(fwnode, "compatible", &compatible);
1063 if (ret)
1064 return NULL;
1065
1066 p = strchr(compatible, ',');
1067 strscpy(devname, p ? p + 1 : compatible, sizeof(devname));
1068 /* Search through the device name */
1069 while (id->name[0]) {
1070 if (strcmp(devname, id->name) == 0)
1071 return id;
1072 id++;
1073 }
1074 return NULL;
1075}
1076
1077/*
1078 * idt_get_fw_data() - get IDT i2c-device parameters from device tree
1079 * @pdev: Pointer to the driver data
1080 */
1081static void idt_get_fw_data(struct idt_89hpesx_dev *pdev)
1082{
1083 struct device *dev = &pdev->client->dev;
1084 struct fwnode_handle *fwnode;
1085 const struct i2c_device_id *ee_id = NULL;
1086 u32 eeprom_addr;
1087 int ret;
1088
1089 device_for_each_child_node(dev, fwnode) {
1090 ee_id = idt_ee_match_id(fwnode);
1091 if (ee_id)
1092 break;
1093
1094 dev_warn(dev, "Skip unsupported EEPROM device %pfw\n", fwnode);
1095 }
1096
1097 /* If there is no fwnode EEPROM device, then set zero size */
1098 if (!ee_id) {
1099 dev_warn(dev, "No fwnode, EEPROM access disabled");
1100 idt_set_defval(pdev);
1101 return;
1102 }
1103
1104 /* Retrieve EEPROM size */
1105 pdev->eesize = (u32)ee_id->driver_data;
1106
1107 /* Get custom EEPROM address from 'reg' attribute */
1108 ret = fwnode_property_read_u32(fwnode, "reg", &eeprom_addr);
1109 if (ret || (eeprom_addr == 0)) {
1110 dev_warn(dev, "No EEPROM reg found, use default address 0x%x",
1111 EEPROM_DEF_ADDR);
1112 pdev->inieecmd = 0;
1113 pdev->eeaddr = EEPROM_DEF_ADDR << 1;
1114 } else {
1115 pdev->inieecmd = EEPROM_USA;
1116 pdev->eeaddr = eeprom_addr << 1;
1117 }
1118
1119 /* Check EEPROM 'read-only' flag */
1120 if (fwnode_property_read_bool(fwnode, "read-only"))
1121 pdev->eero = true;
1122 else /* if (!fwnode_property_read_bool(node, "read-only")) */
1123 pdev->eero = false;
1124
1125 fwnode_handle_put(fwnode);
1126 dev_info(dev, "EEPROM of %d bytes found by 0x%x",
1127 pdev->eesize, pdev->eeaddr);
1128}
1129
1130/*
1131 * idt_create_pdev() - create and init data structure of the driver
1132 * @client: i2c client of IDT PCIe-switch device
1133 */
1134static struct idt_89hpesx_dev *idt_create_pdev(struct i2c_client *client)
1135{
1136 struct idt_89hpesx_dev *pdev;
1137
1138 /* Allocate memory for driver data */
1139 pdev = devm_kmalloc(&client->dev, sizeof(struct idt_89hpesx_dev),
1140 GFP_KERNEL);
1141 if (pdev == NULL)
1142 return ERR_PTR(-ENOMEM);
1143
1144 /* Initialize basic fields of the data */
1145 pdev->client = client;
1146 i2c_set_clientdata(client, pdev);
1147
1148 /* Read firmware nodes information */
1149 idt_get_fw_data(pdev);
1150
1151 /* Initialize basic CSR CMD field - use full DWORD-sized r/w ops */
1152 pdev->inicsrcmd = CSR_DWE;
1153 pdev->csr = CSR_DEF;
1154
1155 /* Enable Packet Error Checking if it's supported by adapter */
1156 if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_PEC)) {
1157 pdev->iniccode = CCODE_PEC;
1158 client->flags |= I2C_CLIENT_PEC;
1159 } else /* PEC is unsupported */ {
1160 pdev->iniccode = 0;
1161 }
1162
1163 return pdev;
1164}
1165
1166/*
1167 * idt_free_pdev() - free data structure of the driver
1168 * @pdev: Pointer to the driver data
1169 */
1170static void idt_free_pdev(struct idt_89hpesx_dev *pdev)
1171{
1172 /* Clear driver data from device private field */
1173 i2c_set_clientdata(pdev->client, NULL);
1174}
1175
1176/*
1177 * idt_set_smbus_ops() - set supported SMBus operations
1178 * @pdev: Pointer to the driver data
1179 * Return status of smbus check operations
1180 */
1181static int idt_set_smbus_ops(struct idt_89hpesx_dev *pdev)
1182{
1183 struct i2c_adapter *adapter = pdev->client->adapter;
1184 struct device *dev = &pdev->client->dev;
1185
1186 /* Check i2c adapter read functionality */
1187 if (i2c_check_functionality(adapter,
1188 I2C_FUNC_SMBUS_READ_BLOCK_DATA)) {
1189 pdev->smb_read = idt_smb_read_block;
1190 dev_dbg(dev, "SMBus block-read op chosen");
1191 } else if (i2c_check_functionality(adapter,
1192 I2C_FUNC_SMBUS_READ_I2C_BLOCK)) {
1193 pdev->smb_read = idt_smb_read_i2c_block;
1194 dev_dbg(dev, "SMBus i2c-block-read op chosen");
1195 } else if (i2c_check_functionality(adapter,
1196 I2C_FUNC_SMBUS_READ_WORD_DATA) &&
1197 i2c_check_functionality(adapter,
1198 I2C_FUNC_SMBUS_READ_BYTE_DATA)) {
1199 pdev->smb_read = idt_smb_read_word;
1200 dev_warn(dev, "Use slow word/byte SMBus read ops");
1201 } else if (i2c_check_functionality(adapter,
1202 I2C_FUNC_SMBUS_READ_BYTE_DATA)) {
1203 pdev->smb_read = idt_smb_read_byte;
1204 dev_warn(dev, "Use slow byte SMBus read op");
1205 } else /* no supported smbus read operations */ {
1206 dev_err(dev, "No supported SMBus read op");
1207 return -EPFNOSUPPORT;
1208 }
1209
1210 /* Check i2c adapter write functionality */
1211 if (i2c_check_functionality(adapter,
1212 I2C_FUNC_SMBUS_WRITE_BLOCK_DATA)) {
1213 pdev->smb_write = idt_smb_write_block;
1214 dev_dbg(dev, "SMBus block-write op chosen");
1215 } else if (i2c_check_functionality(adapter,
1216 I2C_FUNC_SMBUS_WRITE_I2C_BLOCK)) {
1217 pdev->smb_write = idt_smb_write_i2c_block;
1218 dev_dbg(dev, "SMBus i2c-block-write op chosen");
1219 } else if (i2c_check_functionality(adapter,
1220 I2C_FUNC_SMBUS_WRITE_WORD_DATA) &&
1221 i2c_check_functionality(adapter,
1222 I2C_FUNC_SMBUS_WRITE_BYTE_DATA)) {
1223 pdev->smb_write = idt_smb_write_word;
1224 dev_warn(dev, "Use slow word/byte SMBus write op");
1225 } else if (i2c_check_functionality(adapter,
1226 I2C_FUNC_SMBUS_WRITE_BYTE_DATA)) {
1227 pdev->smb_write = idt_smb_write_byte;
1228 dev_warn(dev, "Use slow byte SMBus write op");
1229 } else /* no supported smbus write operations */ {
1230 dev_err(dev, "No supported SMBus write op");
1231 return -EPFNOSUPPORT;
1232 }
1233
1234 /* Initialize IDT SMBus slave interface mutex */
1235 mutex_init(&pdev->smb_mtx);
1236
1237 return 0;
1238}
1239
1240/*
1241 * idt_check_dev() - check whether it's really IDT 89HPESx device
1242 * @pdev: Pointer to the driver data
1243 * Return status of i2c adapter check operation
1244 */
1245static int idt_check_dev(struct idt_89hpesx_dev *pdev)
1246{
1247 struct device *dev = &pdev->client->dev;
1248 u32 viddid;
1249 int ret;
1250
1251 /* Read VID and DID directly from IDT memory space */
1252 ret = idt_csr_read(pdev, IDT_VIDDID_CSR, &viddid);
1253 if (ret != 0) {
1254 dev_err(dev, "Failed to read VID/DID");
1255 return ret;
1256 }
1257
1258 /* Check whether it's IDT device */
1259 if ((viddid & IDT_VID_MASK) != PCI_VENDOR_ID_IDT) {
1260 dev_err(dev, "Got unsupported VID/DID: 0x%08x", viddid);
1261 return -ENODEV;
1262 }
1263
1264 dev_info(dev, "Found IDT 89HPES device VID:0x%04x, DID:0x%04x",
1265 (viddid & IDT_VID_MASK), (viddid >> 16));
1266
1267 return 0;
1268}
1269
1270/*
1271 * idt_create_sysfs_files() - create sysfs attribute files
1272 * @pdev: Pointer to the driver data
1273 * Return status of operation
1274 */
1275static int idt_create_sysfs_files(struct idt_89hpesx_dev *pdev)
1276{
1277 struct device *dev = &pdev->client->dev;
1278 int ret;
1279
1280 /* Don't do anything if EEPROM isn't accessible */
1281 if (pdev->eesize == 0) {
1282 dev_dbg(dev, "Skip creating sysfs-files");
1283 return 0;
1284 }
1285
1286 /*
1287 * Allocate memory for attribute file and copy the declared EEPROM attr
1288 * structure to change some of fields
1289 */
1290 pdev->ee_file = devm_kmemdup(dev, &bin_attr_eeprom,
1291 sizeof(*pdev->ee_file), GFP_KERNEL);
1292 if (!pdev->ee_file)
1293 return -ENOMEM;
1294
1295 /* In case of read-only EEPROM get rid of write ability */
1296 if (pdev->eero) {
1297 pdev->ee_file->attr.mode &= ~0200;
1298 pdev->ee_file->write = NULL;
1299 }
1300 /* Create EEPROM sysfs file */
1301 pdev->ee_file->size = pdev->eesize;
1302 ret = sysfs_create_bin_file(&dev->kobj, pdev->ee_file);
1303 if (ret != 0) {
1304 dev_err(dev, "Failed to create EEPROM sysfs-node");
1305 return ret;
1306 }
1307
1308 return 0;
1309}
1310
1311/*
1312 * idt_remove_sysfs_files() - remove sysfs attribute files
1313 * @pdev: Pointer to the driver data
1314 */
1315static void idt_remove_sysfs_files(struct idt_89hpesx_dev *pdev)
1316{
1317 struct device *dev = &pdev->client->dev;
1318
1319 /* Don't do anything if EEPROM wasn't accessible */
1320 if (pdev->eesize == 0)
1321 return;
1322
1323 /* Remove EEPROM sysfs file */
1324 sysfs_remove_bin_file(&dev->kobj, pdev->ee_file);
1325}
1326
1327/*
1328 * idt_create_dbgfs_files() - create debugfs files
1329 * @pdev: Pointer to the driver data
1330 */
1331#define CSRNAME_LEN ((size_t)32)
1332static void idt_create_dbgfs_files(struct idt_89hpesx_dev *pdev)
1333{
1334 struct i2c_client *cli = pdev->client;
1335 char fname[CSRNAME_LEN];
1336
1337 /* Create Debugfs directory for CSR file */
1338 snprintf(fname, CSRNAME_LEN, "%d-%04hx", cli->adapter->nr, cli->addr);
1339 pdev->csr_dir = debugfs_create_dir(fname, csr_dbgdir);
1340
1341 /* Create Debugfs file for CSR read/write operations */
1342 debugfs_create_file(cli->name, 0600, pdev->csr_dir, pdev,
1343 &csr_dbgfs_ops);
1344}
1345
1346/*
1347 * idt_remove_dbgfs_files() - remove debugfs files
1348 * @pdev: Pointer to the driver data
1349 */
1350static void idt_remove_dbgfs_files(struct idt_89hpesx_dev *pdev)
1351{
1352 /* Remove CSR directory and it sysfs-node */
1353 debugfs_remove_recursive(pdev->csr_dir);
1354}
1355
1356/*
1357 * idt_probe() - IDT 89HPESx driver probe() callback method
1358 */
1359static int idt_probe(struct i2c_client *client)
1360{
1361 struct idt_89hpesx_dev *pdev;
1362 int ret;
1363
1364 /* Create driver data */
1365 pdev = idt_create_pdev(client);
1366 if (IS_ERR(pdev))
1367 return PTR_ERR(pdev);
1368
1369 /* Set SMBus operations */
1370 ret = idt_set_smbus_ops(pdev);
1371 if (ret != 0)
1372 goto err_free_pdev;
1373
1374 /* Check whether it is truly IDT 89HPESx device */
1375 ret = idt_check_dev(pdev);
1376 if (ret != 0)
1377 goto err_free_pdev;
1378
1379 /* Create sysfs files */
1380 ret = idt_create_sysfs_files(pdev);
1381 if (ret != 0)
1382 goto err_free_pdev;
1383
1384 /* Create debugfs files */
1385 idt_create_dbgfs_files(pdev);
1386
1387 return 0;
1388
1389err_free_pdev:
1390 idt_free_pdev(pdev);
1391
1392 return ret;
1393}
1394
1395/*
1396 * idt_remove() - IDT 89HPESx driver remove() callback method
1397 */
1398static void idt_remove(struct i2c_client *client)
1399{
1400 struct idt_89hpesx_dev *pdev = i2c_get_clientdata(client);
1401
1402 /* Remove debugfs files first */
1403 idt_remove_dbgfs_files(pdev);
1404
1405 /* Remove sysfs files */
1406 idt_remove_sysfs_files(pdev);
1407
1408 /* Discard driver data structure */
1409 idt_free_pdev(pdev);
1410}
1411
1412/*
1413 * ee_ids - array of supported EEPROMs
1414 */
1415static const struct i2c_device_id ee_ids[] = {
1416 { "24c32", 4096},
1417 { "24c64", 8192},
1418 { "24c128", 16384},
1419 { "24c256", 32768},
1420 { "24c512", 65536},
1421 {}
1422};
1423MODULE_DEVICE_TABLE(i2c, ee_ids);
1424
1425/*
1426 * idt_ids - supported IDT 89HPESx devices
1427 */
1428static const struct i2c_device_id idt_ids[] = {
1429 { "89hpes8nt2", 0 },
1430 { "89hpes12nt3", 0 },
1431
1432 { "89hpes24nt6ag2", 0 },
1433 { "89hpes32nt8ag2", 0 },
1434 { "89hpes32nt8bg2", 0 },
1435 { "89hpes12nt12g2", 0 },
1436 { "89hpes16nt16g2", 0 },
1437 { "89hpes24nt24g2", 0 },
1438 { "89hpes32nt24ag2", 0 },
1439 { "89hpes32nt24bg2", 0 },
1440
1441 { "89hpes12n3", 0 },
1442 { "89hpes12n3a", 0 },
1443 { "89hpes24n3", 0 },
1444 { "89hpes24n3a", 0 },
1445
1446 { "89hpes32h8", 0 },
1447 { "89hpes32h8g2", 0 },
1448 { "89hpes48h12", 0 },
1449 { "89hpes48h12g2", 0 },
1450 { "89hpes48h12ag2", 0 },
1451 { "89hpes16h16", 0 },
1452 { "89hpes22h16", 0 },
1453 { "89hpes22h16g2", 0 },
1454 { "89hpes34h16", 0 },
1455 { "89hpes34h16g2", 0 },
1456 { "89hpes64h16", 0 },
1457 { "89hpes64h16g2", 0 },
1458 { "89hpes64h16ag2", 0 },
1459
1460 /* { "89hpes3t3", 0 }, // No SMBus-slave iface */
1461 { "89hpes12t3g2", 0 },
1462 { "89hpes24t3g2", 0 },
1463 /* { "89hpes4t4", 0 }, // No SMBus-slave iface */
1464 { "89hpes16t4", 0 },
1465 { "89hpes4t4g2", 0 },
1466 { "89hpes10t4g2", 0 },
1467 { "89hpes16t4g2", 0 },
1468 { "89hpes16t4ag2", 0 },
1469 { "89hpes5t5", 0 },
1470 { "89hpes6t5", 0 },
1471 { "89hpes8t5", 0 },
1472 { "89hpes8t5a", 0 },
1473 { "89hpes24t6", 0 },
1474 { "89hpes6t6g2", 0 },
1475 { "89hpes24t6g2", 0 },
1476 { "89hpes16t7", 0 },
1477 { "89hpes32t8", 0 },
1478 { "89hpes32t8g2", 0 },
1479 { "89hpes48t12", 0 },
1480 { "89hpes48t12g2", 0 },
1481 { /* END OF LIST */ }
1482};
1483MODULE_DEVICE_TABLE(i2c, idt_ids);
1484
1485static const struct of_device_id idt_of_match[] = {
1486 { .compatible = "idt,89hpes8nt2", },
1487 { .compatible = "idt,89hpes12nt3", },
1488
1489 { .compatible = "idt,89hpes24nt6ag2", },
1490 { .compatible = "idt,89hpes32nt8ag2", },
1491 { .compatible = "idt,89hpes32nt8bg2", },
1492 { .compatible = "idt,89hpes12nt12g2", },
1493 { .compatible = "idt,89hpes16nt16g2", },
1494 { .compatible = "idt,89hpes24nt24g2", },
1495 { .compatible = "idt,89hpes32nt24ag2", },
1496 { .compatible = "idt,89hpes32nt24bg2", },
1497
1498 { .compatible = "idt,89hpes12n3", },
1499 { .compatible = "idt,89hpes12n3a", },
1500 { .compatible = "idt,89hpes24n3", },
1501 { .compatible = "idt,89hpes24n3a", },
1502
1503 { .compatible = "idt,89hpes32h8", },
1504 { .compatible = "idt,89hpes32h8g2", },
1505 { .compatible = "idt,89hpes48h12", },
1506 { .compatible = "idt,89hpes48h12g2", },
1507 { .compatible = "idt,89hpes48h12ag2", },
1508 { .compatible = "idt,89hpes16h16", },
1509 { .compatible = "idt,89hpes22h16", },
1510 { .compatible = "idt,89hpes22h16g2", },
1511 { .compatible = "idt,89hpes34h16", },
1512 { .compatible = "idt,89hpes34h16g2", },
1513 { .compatible = "idt,89hpes64h16", },
1514 { .compatible = "idt,89hpes64h16g2", },
1515 { .compatible = "idt,89hpes64h16ag2", },
1516
1517 { .compatible = "idt,89hpes12t3g2", },
1518 { .compatible = "idt,89hpes24t3g2", },
1519
1520 { .compatible = "idt,89hpes16t4", },
1521 { .compatible = "idt,89hpes4t4g2", },
1522 { .compatible = "idt,89hpes10t4g2", },
1523 { .compatible = "idt,89hpes16t4g2", },
1524 { .compatible = "idt,89hpes16t4ag2", },
1525 { .compatible = "idt,89hpes5t5", },
1526 { .compatible = "idt,89hpes6t5", },
1527 { .compatible = "idt,89hpes8t5", },
1528 { .compatible = "idt,89hpes8t5a", },
1529 { .compatible = "idt,89hpes24t6", },
1530 { .compatible = "idt,89hpes6t6g2", },
1531 { .compatible = "idt,89hpes24t6g2", },
1532 { .compatible = "idt,89hpes16t7", },
1533 { .compatible = "idt,89hpes32t8", },
1534 { .compatible = "idt,89hpes32t8g2", },
1535 { .compatible = "idt,89hpes48t12", },
1536 { .compatible = "idt,89hpes48t12g2", },
1537 { },
1538};
1539MODULE_DEVICE_TABLE(of, idt_of_match);
1540
1541/*
1542 * idt_driver - IDT 89HPESx driver structure
1543 */
1544static struct i2c_driver idt_driver = {
1545 .driver = {
1546 .name = IDT_NAME,
1547 .of_match_table = idt_of_match,
1548 },
1549 .probe = idt_probe,
1550 .remove = idt_remove,
1551 .id_table = idt_ids,
1552};
1553
1554/*
1555 * idt_init() - IDT 89HPESx driver init() callback method
1556 */
1557static int __init idt_init(void)
1558{
1559 int ret;
1560
1561 /* Create Debugfs directory first */
1562 if (debugfs_initialized())
1563 csr_dbgdir = debugfs_create_dir("idt_csr", NULL);
1564
1565 /* Add new i2c-device driver */
1566 ret = i2c_add_driver(&idt_driver);
1567 if (ret) {
1568 debugfs_remove_recursive(csr_dbgdir);
1569 return ret;
1570 }
1571
1572 return 0;
1573}
1574module_init(idt_init);
1575
1576/*
1577 * idt_exit() - IDT 89HPESx driver exit() callback method
1578 */
1579static void __exit idt_exit(void)
1580{
1581 /* Discard debugfs directory and all files if any */
1582 debugfs_remove_recursive(csr_dbgdir);
1583
1584 /* Unregister i2c-device driver */
1585 i2c_del_driver(&idt_driver);
1586}
1587module_exit(idt_exit);
1/*
2 * This file is provided under a GPLv2 license. When using or
3 * redistributing this file, you may do so under that license.
4 *
5 * GPL LICENSE SUMMARY
6 *
7 * Copyright (C) 2016 T-Platforms. All Rights Reserved.
8 *
9 * This program is free software; you can redistribute it and/or modify it
10 * under the terms and conditions of the GNU General Public License,
11 * version 2, as published by the Free Software Foundation.
12 *
13 * This program is distributed in the hope that it will be useful, but WITHOUT
14 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
15 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
16 * more details.
17 *
18 * You should have received a copy of the GNU General Public License along
19 * with this program; if not, it can be found <http://www.gnu.org/licenses/>.
20 *
21 * The full GNU General Public License is included in this distribution in
22 * the file called "COPYING".
23 *
24 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
25 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
26 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
27 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
28 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
29 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
30 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
31 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
32 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
33 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
34 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
35 *
36 * IDT PCIe-switch NTB Linux driver
37 *
38 * Contact Information:
39 * Serge Semin <fancer.lancer@gmail.com>, <Sergey.Semin@t-platforms.ru>
40 */
41/*
42 * NOTE of the IDT 89HPESx SMBus-slave interface driver
43 * This driver primarily is developed to have an access to EEPROM device of
44 * IDT PCIe-switches. IDT provides a simple SMBus interface to perform IO-
45 * operations from/to EEPROM, which is located at private (so called Master)
46 * SMBus of switches. Using that interface this the driver creates a simple
47 * binary sysfs-file in the device directory:
48 * /sys/bus/i2c/devices/<bus>-<devaddr>/eeprom
49 * In case if read-only flag is specified in the dts-node of device desription,
50 * User-space applications won't be able to write to the EEPROM sysfs-node.
51 * Additionally IDT 89HPESx SMBus interface has an ability to write/read
52 * data of device CSRs. This driver exposes debugf-file to perform simple IO
53 * operations using that ability for just basic debug purpose. Particularly
54 * next file is created in the specific debugfs-directory:
55 * /sys/kernel/debug/idt_csr/
56 * Format of the debugfs-node is:
57 * $ cat /sys/kernel/debug/idt_csr/<bus>-<devaddr>/<devname>;
58 * <CSR address>:<CSR value>
59 * So reading the content of the file gives current CSR address and it value.
60 * If User-space application wishes to change current CSR address,
61 * it can just write a proper value to the sysfs-file:
62 * $ echo "<CSR address>" > /sys/kernel/debug/idt_csr/<bus>-<devaddr>/<devname>
63 * If it wants to change the CSR value as well, the format of the write
64 * operation is:
65 * $ echo "<CSR address>:<CSR value>" > \
66 * /sys/kernel/debug/idt_csr/<bus>-<devaddr>/<devname>;
67 * CSR address and value can be any of hexadecimal, decimal or octal format.
68 */
69
70#include <linux/kernel.h>
71#include <linux/init.h>
72#include <linux/module.h>
73#include <linux/types.h>
74#include <linux/sizes.h>
75#include <linux/slab.h>
76#include <linux/mutex.h>
77#include <linux/sysfs.h>
78#include <linux/debugfs.h>
79#include <linux/mod_devicetable.h>
80#include <linux/property.h>
81#include <linux/i2c.h>
82#include <linux/pci_ids.h>
83#include <linux/delay.h>
84
85#define IDT_NAME "89hpesx"
86#define IDT_89HPESX_DESC "IDT 89HPESx SMBus-slave interface driver"
87#define IDT_89HPESX_VER "1.0"
88
89MODULE_DESCRIPTION(IDT_89HPESX_DESC);
90MODULE_VERSION(IDT_89HPESX_VER);
91MODULE_LICENSE("GPL v2");
92MODULE_AUTHOR("T-platforms");
93
94/*
95 * csr_dbgdir - CSR read/write operations Debugfs directory
96 */
97static struct dentry *csr_dbgdir;
98
99/*
100 * struct idt_89hpesx_dev - IDT 89HPESx device data structure
101 * @eesize: Size of EEPROM in bytes (calculated from "idt,eecompatible")
102 * @eero: EEPROM Read-only flag
103 * @eeaddr: EEPROM custom address
104 *
105 * @inieecmd: Initial cmd value for EEPROM read/write operations
106 * @inicsrcmd: Initial cmd value for CSR read/write operations
107 * @iniccode: Initialial command code value for IO-operations
108 *
109 * @csr: CSR address to perform read operation
110 *
111 * @smb_write: SMBus write method
112 * @smb_read: SMBus read method
113 * @smb_mtx: SMBus mutex
114 *
115 * @client: i2c client used to perform IO operations
116 *
117 * @ee_file: EEPROM read/write sysfs-file
118 * @csr_file: CSR read/write debugfs-node
119 */
120struct idt_smb_seq;
121struct idt_89hpesx_dev {
122 u32 eesize;
123 bool eero;
124 u8 eeaddr;
125
126 u8 inieecmd;
127 u8 inicsrcmd;
128 u8 iniccode;
129
130 u16 csr;
131
132 int (*smb_write)(struct idt_89hpesx_dev *, const struct idt_smb_seq *);
133 int (*smb_read)(struct idt_89hpesx_dev *, struct idt_smb_seq *);
134 struct mutex smb_mtx;
135
136 struct i2c_client *client;
137
138 struct bin_attribute *ee_file;
139 struct dentry *csr_dir;
140 struct dentry *csr_file;
141};
142
143/*
144 * struct idt_smb_seq - sequence of data to be read/written from/to IDT 89HPESx
145 * @ccode: SMBus command code
146 * @bytecnt: Byte count of operation
147 * @data: Data to by written
148 */
149struct idt_smb_seq {
150 u8 ccode;
151 u8 bytecnt;
152 u8 *data;
153};
154
155/*
156 * struct idt_eeprom_seq - sequence of data to be read/written from/to EEPROM
157 * @cmd: Transaction CMD
158 * @eeaddr: EEPROM custom address
159 * @memaddr: Internal memory address of EEPROM
160 * @data: Data to be written at the memory address
161 */
162struct idt_eeprom_seq {
163 u8 cmd;
164 u8 eeaddr;
165 u16 memaddr;
166 u8 data;
167} __packed;
168
169/*
170 * struct idt_csr_seq - sequence of data to be read/written from/to CSR
171 * @cmd: Transaction CMD
172 * @csraddr: Internal IDT device CSR address
173 * @data: Data to be read/written from/to the CSR address
174 */
175struct idt_csr_seq {
176 u8 cmd;
177 u16 csraddr;
178 u32 data;
179} __packed;
180
181/*
182 * SMBus command code macros
183 * @CCODE_END: Indicates the end of transaction
184 * @CCODE_START: Indicates the start of transaction
185 * @CCODE_CSR: CSR read/write transaction
186 * @CCODE_EEPROM: EEPROM read/write transaction
187 * @CCODE_BYTE: Supplied data has BYTE length
188 * @CCODE_WORD: Supplied data has WORD length
189 * @CCODE_BLOCK: Supplied data has variable length passed in bytecnt
190 * byte right following CCODE byte
191 */
192#define CCODE_END ((u8)0x01)
193#define CCODE_START ((u8)0x02)
194#define CCODE_CSR ((u8)0x00)
195#define CCODE_EEPROM ((u8)0x04)
196#define CCODE_BYTE ((u8)0x00)
197#define CCODE_WORD ((u8)0x20)
198#define CCODE_BLOCK ((u8)0x40)
199#define CCODE_PEC ((u8)0x80)
200
201/*
202 * EEPROM command macros
203 * @EEPROM_OP_WRITE: EEPROM write operation
204 * @EEPROM_OP_READ: EEPROM read operation
205 * @EEPROM_USA: Use specified address of EEPROM
206 * @EEPROM_NAERR: EEPROM device is not ready to respond
207 * @EEPROM_LAERR: EEPROM arbitration loss error
208 * @EEPROM_MSS: EEPROM misplace start & stop bits error
209 * @EEPROM_WR_CNT: Bytes count to perform write operation
210 * @EEPROM_WRRD_CNT: Bytes count to write before reading
211 * @EEPROM_RD_CNT: Bytes count to perform read operation
212 * @EEPROM_DEF_SIZE: Fall back size of EEPROM
213 * @EEPROM_DEF_ADDR: Defatul EEPROM address
214 * @EEPROM_TOUT: Timeout before retry read operation if eeprom is busy
215 */
216#define EEPROM_OP_WRITE ((u8)0x00)
217#define EEPROM_OP_READ ((u8)0x01)
218#define EEPROM_USA ((u8)0x02)
219#define EEPROM_NAERR ((u8)0x08)
220#define EEPROM_LAERR ((u8)0x10)
221#define EEPROM_MSS ((u8)0x20)
222#define EEPROM_WR_CNT ((u8)5)
223#define EEPROM_WRRD_CNT ((u8)4)
224#define EEPROM_RD_CNT ((u8)5)
225#define EEPROM_DEF_SIZE ((u16)4096)
226#define EEPROM_DEF_ADDR ((u8)0x50)
227#define EEPROM_TOUT (100)
228
229/*
230 * CSR command macros
231 * @CSR_DWE: Enable all four bytes of the operation
232 * @CSR_OP_WRITE: CSR write operation
233 * @CSR_OP_READ: CSR read operation
234 * @CSR_RERR: Read operation error
235 * @CSR_WERR: Write operation error
236 * @CSR_WR_CNT: Bytes count to perform write operation
237 * @CSR_WRRD_CNT: Bytes count to write before reading
238 * @CSR_RD_CNT: Bytes count to perform read operation
239 * @CSR_MAX: Maximum CSR address
240 * @CSR_DEF: Default CSR address
241 * @CSR_REAL_ADDR: CSR real unshifted address
242 */
243#define CSR_DWE ((u8)0x0F)
244#define CSR_OP_WRITE ((u8)0x00)
245#define CSR_OP_READ ((u8)0x10)
246#define CSR_RERR ((u8)0x40)
247#define CSR_WERR ((u8)0x80)
248#define CSR_WR_CNT ((u8)7)
249#define CSR_WRRD_CNT ((u8)3)
250#define CSR_RD_CNT ((u8)7)
251#define CSR_MAX ((u32)0x3FFFF)
252#define CSR_DEF ((u16)0x0000)
253#define CSR_REAL_ADDR(val) ((unsigned int)val << 2)
254
255/*
256 * IDT 89HPESx basic register
257 * @IDT_VIDDID_CSR: PCIe VID and DID of IDT 89HPESx
258 * @IDT_VID_MASK: Mask of VID
259 */
260#define IDT_VIDDID_CSR ((u32)0x0000)
261#define IDT_VID_MASK ((u32)0xFFFF)
262
263/*
264 * IDT 89HPESx can send NACK when new command is sent before previous one
265 * fininshed execution. In this case driver retries operation
266 * certain times.
267 * @RETRY_CNT: Number of retries before giving up and fail
268 * @idt_smb_safe: Generate a retry loop on corresponding SMBus method
269 */
270#define RETRY_CNT (128)
271#define idt_smb_safe(ops, args...) ({ \
272 int __retry = RETRY_CNT; \
273 s32 __sts; \
274 do { \
275 __sts = i2c_smbus_ ## ops ## _data(args); \
276 } while (__retry-- && __sts < 0); \
277 __sts; \
278})
279
280/*===========================================================================
281 * i2c bus level IO-operations
282 *===========================================================================
283 */
284
285/*
286 * idt_smb_write_byte() - SMBus write method when I2C_SMBUS_BYTE_DATA operation
287 * is only available
288 * @pdev: Pointer to the driver data
289 * @seq: Sequence of data to be written
290 */
291static int idt_smb_write_byte(struct idt_89hpesx_dev *pdev,
292 const struct idt_smb_seq *seq)
293{
294 s32 sts;
295 u8 ccode;
296 int idx;
297
298 /* Loop over the supplied data sending byte one-by-one */
299 for (idx = 0; idx < seq->bytecnt; idx++) {
300 /* Collect the command code byte */
301 ccode = seq->ccode | CCODE_BYTE;
302 if (idx == 0)
303 ccode |= CCODE_START;
304 if (idx == seq->bytecnt - 1)
305 ccode |= CCODE_END;
306
307 /* Send data to the device */
308 sts = idt_smb_safe(write_byte, pdev->client, ccode,
309 seq->data[idx]);
310 if (sts != 0)
311 return (int)sts;
312 }
313
314 return 0;
315}
316
317/*
318 * idt_smb_read_byte() - SMBus read method when I2C_SMBUS_BYTE_DATA operation
319 * is only available
320 * @pdev: Pointer to the driver data
321 * @seq: Buffer to read data to
322 */
323static int idt_smb_read_byte(struct idt_89hpesx_dev *pdev,
324 struct idt_smb_seq *seq)
325{
326 s32 sts;
327 u8 ccode;
328 int idx;
329
330 /* Loop over the supplied buffer receiving byte one-by-one */
331 for (idx = 0; idx < seq->bytecnt; idx++) {
332 /* Collect the command code byte */
333 ccode = seq->ccode | CCODE_BYTE;
334 if (idx == 0)
335 ccode |= CCODE_START;
336 if (idx == seq->bytecnt - 1)
337 ccode |= CCODE_END;
338
339 /* Read data from the device */
340 sts = idt_smb_safe(read_byte, pdev->client, ccode);
341 if (sts < 0)
342 return (int)sts;
343
344 seq->data[idx] = (u8)sts;
345 }
346
347 return 0;
348}
349
350/*
351 * idt_smb_write_word() - SMBus write method when I2C_SMBUS_BYTE_DATA and
352 * I2C_FUNC_SMBUS_WORD_DATA operations are available
353 * @pdev: Pointer to the driver data
354 * @seq: Sequence of data to be written
355 */
356static int idt_smb_write_word(struct idt_89hpesx_dev *pdev,
357 const struct idt_smb_seq *seq)
358{
359 s32 sts;
360 u8 ccode;
361 int idx, evencnt;
362
363 /* Calculate the even count of data to send */
364 evencnt = seq->bytecnt - (seq->bytecnt % 2);
365
366 /* Loop over the supplied data sending two bytes at a time */
367 for (idx = 0; idx < evencnt; idx += 2) {
368 /* Collect the command code byte */
369 ccode = seq->ccode | CCODE_WORD;
370 if (idx == 0)
371 ccode |= CCODE_START;
372 if (idx == evencnt - 2)
373 ccode |= CCODE_END;
374
375 /* Send word data to the device */
376 sts = idt_smb_safe(write_word, pdev->client, ccode,
377 *(u16 *)&seq->data[idx]);
378 if (sts != 0)
379 return (int)sts;
380 }
381
382 /* If there is odd number of bytes then send just one last byte */
383 if (seq->bytecnt != evencnt) {
384 /* Collect the command code byte */
385 ccode = seq->ccode | CCODE_BYTE | CCODE_END;
386 if (idx == 0)
387 ccode |= CCODE_START;
388
389 /* Send byte data to the device */
390 sts = idt_smb_safe(write_byte, pdev->client, ccode,
391 seq->data[idx]);
392 if (sts != 0)
393 return (int)sts;
394 }
395
396 return 0;
397}
398
399/*
400 * idt_smb_read_word() - SMBus read method when I2C_SMBUS_BYTE_DATA and
401 * I2C_FUNC_SMBUS_WORD_DATA operations are available
402 * @pdev: Pointer to the driver data
403 * @seq: Buffer to read data to
404 */
405static int idt_smb_read_word(struct idt_89hpesx_dev *pdev,
406 struct idt_smb_seq *seq)
407{
408 s32 sts;
409 u8 ccode;
410 int idx, evencnt;
411
412 /* Calculate the even count of data to send */
413 evencnt = seq->bytecnt - (seq->bytecnt % 2);
414
415 /* Loop over the supplied data reading two bytes at a time */
416 for (idx = 0; idx < evencnt; idx += 2) {
417 /* Collect the command code byte */
418 ccode = seq->ccode | CCODE_WORD;
419 if (idx == 0)
420 ccode |= CCODE_START;
421 if (idx == evencnt - 2)
422 ccode |= CCODE_END;
423
424 /* Read word data from the device */
425 sts = idt_smb_safe(read_word, pdev->client, ccode);
426 if (sts < 0)
427 return (int)sts;
428
429 *(u16 *)&seq->data[idx] = (u16)sts;
430 }
431
432 /* If there is odd number of bytes then receive just one last byte */
433 if (seq->bytecnt != evencnt) {
434 /* Collect the command code byte */
435 ccode = seq->ccode | CCODE_BYTE | CCODE_END;
436 if (idx == 0)
437 ccode |= CCODE_START;
438
439 /* Read last data byte from the device */
440 sts = idt_smb_safe(read_byte, pdev->client, ccode);
441 if (sts < 0)
442 return (int)sts;
443
444 seq->data[idx] = (u8)sts;
445 }
446
447 return 0;
448}
449
450/*
451 * idt_smb_write_block() - SMBus write method when I2C_SMBUS_BLOCK_DATA
452 * operation is available
453 * @pdev: Pointer to the driver data
454 * @seq: Sequence of data to be written
455 */
456static int idt_smb_write_block(struct idt_89hpesx_dev *pdev,
457 const struct idt_smb_seq *seq)
458{
459 u8 ccode;
460
461 /* Return error if too much data passed to send */
462 if (seq->bytecnt > I2C_SMBUS_BLOCK_MAX)
463 return -EINVAL;
464
465 /* Collect the command code byte */
466 ccode = seq->ccode | CCODE_BLOCK | CCODE_START | CCODE_END;
467
468 /* Send block of data to the device */
469 return idt_smb_safe(write_block, pdev->client, ccode, seq->bytecnt,
470 seq->data);
471}
472
473/*
474 * idt_smb_read_block() - SMBus read method when I2C_SMBUS_BLOCK_DATA
475 * operation is available
476 * @pdev: Pointer to the driver data
477 * @seq: Buffer to read data to
478 */
479static int idt_smb_read_block(struct idt_89hpesx_dev *pdev,
480 struct idt_smb_seq *seq)
481{
482 s32 sts;
483 u8 ccode;
484
485 /* Return error if too much data passed to send */
486 if (seq->bytecnt > I2C_SMBUS_BLOCK_MAX)
487 return -EINVAL;
488
489 /* Collect the command code byte */
490 ccode = seq->ccode | CCODE_BLOCK | CCODE_START | CCODE_END;
491
492 /* Read block of data from the device */
493 sts = idt_smb_safe(read_block, pdev->client, ccode, seq->data);
494 if (sts != seq->bytecnt)
495 return (sts < 0 ? sts : -ENODATA);
496
497 return 0;
498}
499
500/*
501 * idt_smb_write_i2c_block() - SMBus write method when I2C_SMBUS_I2C_BLOCK_DATA
502 * operation is available
503 * @pdev: Pointer to the driver data
504 * @seq: Sequence of data to be written
505 *
506 * NOTE It's usual SMBus write block operation, except the actual data length is
507 * sent as first byte of data
508 */
509static int idt_smb_write_i2c_block(struct idt_89hpesx_dev *pdev,
510 const struct idt_smb_seq *seq)
511{
512 u8 ccode, buf[I2C_SMBUS_BLOCK_MAX + 1];
513
514 /* Return error if too much data passed to send */
515 if (seq->bytecnt > I2C_SMBUS_BLOCK_MAX)
516 return -EINVAL;
517
518 /* Collect the data to send. Length byte must be added prior the data */
519 buf[0] = seq->bytecnt;
520 memcpy(&buf[1], seq->data, seq->bytecnt);
521
522 /* Collect the command code byte */
523 ccode = seq->ccode | CCODE_BLOCK | CCODE_START | CCODE_END;
524
525 /* Send length and block of data to the device */
526 return idt_smb_safe(write_i2c_block, pdev->client, ccode,
527 seq->bytecnt + 1, buf);
528}
529
530/*
531 * idt_smb_read_i2c_block() - SMBus read method when I2C_SMBUS_I2C_BLOCK_DATA
532 * operation is available
533 * @pdev: Pointer to the driver data
534 * @seq: Buffer to read data to
535 *
536 * NOTE It's usual SMBus read block operation, except the actual data length is
537 * retrieved as first byte of data
538 */
539static int idt_smb_read_i2c_block(struct idt_89hpesx_dev *pdev,
540 struct idt_smb_seq *seq)
541{
542 u8 ccode, buf[I2C_SMBUS_BLOCK_MAX + 1];
543 s32 sts;
544
545 /* Return error if too much data passed to send */
546 if (seq->bytecnt > I2C_SMBUS_BLOCK_MAX)
547 return -EINVAL;
548
549 /* Collect the command code byte */
550 ccode = seq->ccode | CCODE_BLOCK | CCODE_START | CCODE_END;
551
552 /* Read length and block of data from the device */
553 sts = idt_smb_safe(read_i2c_block, pdev->client, ccode,
554 seq->bytecnt + 1, buf);
555 if (sts != seq->bytecnt + 1)
556 return (sts < 0 ? sts : -ENODATA);
557 if (buf[0] != seq->bytecnt)
558 return -ENODATA;
559
560 /* Copy retrieved data to the output data buffer */
561 memcpy(seq->data, &buf[1], seq->bytecnt);
562
563 return 0;
564}
565
566/*===========================================================================
567 * EEPROM IO-operations
568 *===========================================================================
569 */
570
571/*
572 * idt_eeprom_read_byte() - read just one byte from EEPROM
573 * @pdev: Pointer to the driver data
574 * @memaddr: Start EEPROM memory address
575 * @data: Data to be written to EEPROM
576 */
577static int idt_eeprom_read_byte(struct idt_89hpesx_dev *pdev, u16 memaddr,
578 u8 *data)
579{
580 struct device *dev = &pdev->client->dev;
581 struct idt_eeprom_seq eeseq;
582 struct idt_smb_seq smbseq;
583 int ret, retry;
584
585 /* Initialize SMBus sequence fields */
586 smbseq.ccode = pdev->iniccode | CCODE_EEPROM;
587 smbseq.data = (u8 *)&eeseq;
588
589 /*
590 * Sometimes EEPROM may respond with NACK if it's busy with previous
591 * operation, so we need to perform a few attempts of read cycle
592 */
593 retry = RETRY_CNT;
594 do {
595 /* Send EEPROM memory address to read data from */
596 smbseq.bytecnt = EEPROM_WRRD_CNT;
597 eeseq.cmd = pdev->inieecmd | EEPROM_OP_READ;
598 eeseq.eeaddr = pdev->eeaddr;
599 eeseq.memaddr = cpu_to_le16(memaddr);
600 ret = pdev->smb_write(pdev, &smbseq);
601 if (ret != 0) {
602 dev_err(dev, "Failed to init eeprom addr 0x%02hhx",
603 memaddr);
604 break;
605 }
606
607 /* Perform read operation */
608 smbseq.bytecnt = EEPROM_RD_CNT;
609 ret = pdev->smb_read(pdev, &smbseq);
610 if (ret != 0) {
611 dev_err(dev, "Failed to read eeprom data 0x%02hhx",
612 memaddr);
613 break;
614 }
615
616 /* Restart read operation if the device is busy */
617 if (retry && (eeseq.cmd & EEPROM_NAERR)) {
618 dev_dbg(dev, "EEPROM busy, retry reading after %d ms",
619 EEPROM_TOUT);
620 msleep(EEPROM_TOUT);
621 continue;
622 }
623
624 /* Check whether IDT successfully read data from EEPROM */
625 if (eeseq.cmd & (EEPROM_NAERR | EEPROM_LAERR | EEPROM_MSS)) {
626 dev_err(dev,
627 "Communication with eeprom failed, cmd 0x%hhx",
628 eeseq.cmd);
629 ret = -EREMOTEIO;
630 break;
631 }
632
633 /* Save retrieved data and exit the loop */
634 *data = eeseq.data;
635 break;
636 } while (retry--);
637
638 /* Return the status of operation */
639 return ret;
640}
641
642/*
643 * idt_eeprom_write() - EEPROM write operation
644 * @pdev: Pointer to the driver data
645 * @memaddr: Start EEPROM memory address
646 * @len: Length of data to be written
647 * @data: Data to be written to EEPROM
648 */
649static int idt_eeprom_write(struct idt_89hpesx_dev *pdev, u16 memaddr, u16 len,
650 const u8 *data)
651{
652 struct device *dev = &pdev->client->dev;
653 struct idt_eeprom_seq eeseq;
654 struct idt_smb_seq smbseq;
655 int ret;
656 u16 idx;
657
658 /* Initialize SMBus sequence fields */
659 smbseq.ccode = pdev->iniccode | CCODE_EEPROM;
660 smbseq.data = (u8 *)&eeseq;
661
662 /* Send data byte-by-byte, checking if it is successfully written */
663 for (idx = 0; idx < len; idx++, memaddr++) {
664 /* Lock IDT SMBus device */
665 mutex_lock(&pdev->smb_mtx);
666
667 /* Perform write operation */
668 smbseq.bytecnt = EEPROM_WR_CNT;
669 eeseq.cmd = pdev->inieecmd | EEPROM_OP_WRITE;
670 eeseq.eeaddr = pdev->eeaddr;
671 eeseq.memaddr = cpu_to_le16(memaddr);
672 eeseq.data = data[idx];
673 ret = pdev->smb_write(pdev, &smbseq);
674 if (ret != 0) {
675 dev_err(dev,
676 "Failed to write 0x%04hx:0x%02hhx to eeprom",
677 memaddr, data[idx]);
678 goto err_mutex_unlock;
679 }
680
681 /*
682 * Check whether the data is successfully written by reading
683 * from the same EEPROM memory address.
684 */
685 eeseq.data = ~data[idx];
686 ret = idt_eeprom_read_byte(pdev, memaddr, &eeseq.data);
687 if (ret != 0)
688 goto err_mutex_unlock;
689
690 /* Check whether the read byte is the same as written one */
691 if (eeseq.data != data[idx]) {
692 dev_err(dev, "Values don't match 0x%02hhx != 0x%02hhx",
693 eeseq.data, data[idx]);
694 ret = -EREMOTEIO;
695 goto err_mutex_unlock;
696 }
697
698 /* Unlock IDT SMBus device */
699err_mutex_unlock:
700 mutex_unlock(&pdev->smb_mtx);
701 if (ret != 0)
702 return ret;
703 }
704
705 return 0;
706}
707
708/*
709 * idt_eeprom_read() - EEPROM read operation
710 * @pdev: Pointer to the driver data
711 * @memaddr: Start EEPROM memory address
712 * @len: Length of data to read
713 * @buf: Buffer to read data to
714 */
715static int idt_eeprom_read(struct idt_89hpesx_dev *pdev, u16 memaddr, u16 len,
716 u8 *buf)
717{
718 int ret;
719 u16 idx;
720
721 /* Read data byte-by-byte, retrying if it wasn't successful */
722 for (idx = 0; idx < len; idx++, memaddr++) {
723 /* Lock IDT SMBus device */
724 mutex_lock(&pdev->smb_mtx);
725
726 /* Just read the byte to the buffer */
727 ret = idt_eeprom_read_byte(pdev, memaddr, &buf[idx]);
728
729 /* Unlock IDT SMBus device */
730 mutex_unlock(&pdev->smb_mtx);
731
732 /* Return error if read operation failed */
733 if (ret != 0)
734 return ret;
735 }
736
737 return 0;
738}
739
740/*===========================================================================
741 * CSR IO-operations
742 *===========================================================================
743 */
744
745/*
746 * idt_csr_write() - CSR write operation
747 * @pdev: Pointer to the driver data
748 * @csraddr: CSR address (with no two LS bits)
749 * @data: Data to be written to CSR
750 */
751static int idt_csr_write(struct idt_89hpesx_dev *pdev, u16 csraddr,
752 const u32 data)
753{
754 struct device *dev = &pdev->client->dev;
755 struct idt_csr_seq csrseq;
756 struct idt_smb_seq smbseq;
757 int ret;
758
759 /* Initialize SMBus sequence fields */
760 smbseq.ccode = pdev->iniccode | CCODE_CSR;
761 smbseq.data = (u8 *)&csrseq;
762
763 /* Lock IDT SMBus device */
764 mutex_lock(&pdev->smb_mtx);
765
766 /* Perform write operation */
767 smbseq.bytecnt = CSR_WR_CNT;
768 csrseq.cmd = pdev->inicsrcmd | CSR_OP_WRITE;
769 csrseq.csraddr = cpu_to_le16(csraddr);
770 csrseq.data = cpu_to_le32(data);
771 ret = pdev->smb_write(pdev, &smbseq);
772 if (ret != 0) {
773 dev_err(dev, "Failed to write 0x%04x: 0x%04x to csr",
774 CSR_REAL_ADDR(csraddr), data);
775 goto err_mutex_unlock;
776 }
777
778 /* Send CSR address to read data from */
779 smbseq.bytecnt = CSR_WRRD_CNT;
780 csrseq.cmd = pdev->inicsrcmd | CSR_OP_READ;
781 ret = pdev->smb_write(pdev, &smbseq);
782 if (ret != 0) {
783 dev_err(dev, "Failed to init csr address 0x%04x",
784 CSR_REAL_ADDR(csraddr));
785 goto err_mutex_unlock;
786 }
787
788 /* Perform read operation */
789 smbseq.bytecnt = CSR_RD_CNT;
790 ret = pdev->smb_read(pdev, &smbseq);
791 if (ret != 0) {
792 dev_err(dev, "Failed to read csr 0x%04x",
793 CSR_REAL_ADDR(csraddr));
794 goto err_mutex_unlock;
795 }
796
797 /* Check whether IDT successfully retrieved CSR data */
798 if (csrseq.cmd & (CSR_RERR | CSR_WERR)) {
799 dev_err(dev, "IDT failed to perform CSR r/w");
800 ret = -EREMOTEIO;
801 goto err_mutex_unlock;
802 }
803
804 /* Unlock IDT SMBus device */
805err_mutex_unlock:
806 mutex_unlock(&pdev->smb_mtx);
807
808 return ret;
809}
810
811/*
812 * idt_csr_read() - CSR read operation
813 * @pdev: Pointer to the driver data
814 * @csraddr: CSR address (with no two LS bits)
815 * @data: Data to be written to CSR
816 */
817static int idt_csr_read(struct idt_89hpesx_dev *pdev, u16 csraddr, u32 *data)
818{
819 struct device *dev = &pdev->client->dev;
820 struct idt_csr_seq csrseq;
821 struct idt_smb_seq smbseq;
822 int ret;
823
824 /* Initialize SMBus sequence fields */
825 smbseq.ccode = pdev->iniccode | CCODE_CSR;
826 smbseq.data = (u8 *)&csrseq;
827
828 /* Lock IDT SMBus device */
829 mutex_lock(&pdev->smb_mtx);
830
831 /* Send CSR register address before reading it */
832 smbseq.bytecnt = CSR_WRRD_CNT;
833 csrseq.cmd = pdev->inicsrcmd | CSR_OP_READ;
834 csrseq.csraddr = cpu_to_le16(csraddr);
835 ret = pdev->smb_write(pdev, &smbseq);
836 if (ret != 0) {
837 dev_err(dev, "Failed to init csr address 0x%04x",
838 CSR_REAL_ADDR(csraddr));
839 goto err_mutex_unlock;
840 }
841
842 /* Perform read operation */
843 smbseq.bytecnt = CSR_RD_CNT;
844 ret = pdev->smb_read(pdev, &smbseq);
845 if (ret != 0) {
846 dev_err(dev, "Failed to read csr 0x%04hx",
847 CSR_REAL_ADDR(csraddr));
848 goto err_mutex_unlock;
849 }
850
851 /* Check whether IDT successfully retrieved CSR data */
852 if (csrseq.cmd & (CSR_RERR | CSR_WERR)) {
853 dev_err(dev, "IDT failed to perform CSR r/w");
854 ret = -EREMOTEIO;
855 goto err_mutex_unlock;
856 }
857
858 /* Save data retrieved from IDT */
859 *data = le32_to_cpu(csrseq.data);
860
861 /* Unlock IDT SMBus device */
862err_mutex_unlock:
863 mutex_unlock(&pdev->smb_mtx);
864
865 return ret;
866}
867
868/*===========================================================================
869 * Sysfs/debugfs-nodes IO-operations
870 *===========================================================================
871 */
872
873/*
874 * eeprom_write() - EEPROM sysfs-node write callback
875 * @filep: Pointer to the file system node
876 * @kobj: Pointer to the kernel object related to the sysfs-node
877 * @attr: Attributes of the file
878 * @buf: Buffer to write data to
879 * @off: Offset at which data should be written to
880 * @count: Number of bytes to write
881 */
882static ssize_t eeprom_write(struct file *filp, struct kobject *kobj,
883 struct bin_attribute *attr,
884 char *buf, loff_t off, size_t count)
885{
886 struct idt_89hpesx_dev *pdev;
887 int ret;
888
889 /* Retrieve driver data */
890 pdev = dev_get_drvdata(kobj_to_dev(kobj));
891
892 /* Perform EEPROM write operation */
893 ret = idt_eeprom_write(pdev, (u16)off, (u16)count, (u8 *)buf);
894 return (ret != 0 ? ret : count);
895}
896
897/*
898 * eeprom_read() - EEPROM sysfs-node read callback
899 * @filep: Pointer to the file system node
900 * @kobj: Pointer to the kernel object related to the sysfs-node
901 * @attr: Attributes of the file
902 * @buf: Buffer to write data to
903 * @off: Offset at which data should be written to
904 * @count: Number of bytes to write
905 */
906static ssize_t eeprom_read(struct file *filp, struct kobject *kobj,
907 struct bin_attribute *attr,
908 char *buf, loff_t off, size_t count)
909{
910 struct idt_89hpesx_dev *pdev;
911 int ret;
912
913 /* Retrieve driver data */
914 pdev = dev_get_drvdata(kobj_to_dev(kobj));
915
916 /* Perform EEPROM read operation */
917 ret = idt_eeprom_read(pdev, (u16)off, (u16)count, (u8 *)buf);
918 return (ret != 0 ? ret : count);
919}
920
921/*
922 * idt_dbgfs_csr_write() - CSR debugfs-node write callback
923 * @filep: Pointer to the file system file descriptor
924 * @buf: Buffer to read data from
925 * @count: Size of the buffer
926 * @offp: Offset within the file
927 *
928 * It accepts either "0x<reg addr>:0x<value>" for saving register address
929 * and writing value to specified DWORD register or "0x<reg addr>" for
930 * just saving register address in order to perform next read operation.
931 *
932 * WARNING No spaces are allowed. Incoming string must be strictly formated as:
933 * "<reg addr>:<value>". Register address must be aligned within 4 bytes
934 * (one DWORD).
935 */
936static ssize_t idt_dbgfs_csr_write(struct file *filep, const char __user *ubuf,
937 size_t count, loff_t *offp)
938{
939 struct idt_89hpesx_dev *pdev = filep->private_data;
940 char *colon_ch, *csraddr_str, *csrval_str;
941 int ret, csraddr_len, csrval_len;
942 u32 csraddr, csrval;
943 char *buf;
944
945 /* Copy data from User-space */
946 buf = kmalloc(count + 1, GFP_KERNEL);
947 if (!buf)
948 return -ENOMEM;
949
950 ret = simple_write_to_buffer(buf, count, offp, ubuf, count);
951 if (ret < 0)
952 goto free_buf;
953 buf[count] = 0;
954
955 /* Find position of colon in the buffer */
956 colon_ch = strnchr(buf, count, ':');
957
958 /*
959 * If there is colon passed then new CSR value should be parsed as
960 * well, so allocate buffer for CSR address substring.
961 * If no colon is found, then string must have just one number with
962 * no new CSR value
963 */
964 if (colon_ch != NULL) {
965 csraddr_len = colon_ch - buf;
966 csraddr_str =
967 kmalloc(sizeof(char)*(csraddr_len + 1), GFP_KERNEL);
968 if (csraddr_str == NULL) {
969 ret = -ENOMEM;
970 goto free_buf;
971 }
972 /* Copy the register address to the substring buffer */
973 strncpy(csraddr_str, buf, csraddr_len);
974 csraddr_str[csraddr_len] = '\0';
975 /* Register value must follow the colon */
976 csrval_str = colon_ch + 1;
977 csrval_len = strnlen(csrval_str, count - csraddr_len);
978 } else /* if (str_colon == NULL) */ {
979 csraddr_str = (char *)buf; /* Just to shut warning up */
980 csraddr_len = strnlen(csraddr_str, count);
981 csrval_str = NULL;
982 csrval_len = 0;
983 }
984
985 /* Convert CSR address to u32 value */
986 ret = kstrtou32(csraddr_str, 0, &csraddr);
987 if (ret != 0)
988 goto free_csraddr_str;
989
990 /* Check whether passed register address is valid */
991 if (csraddr > CSR_MAX || !IS_ALIGNED(csraddr, SZ_4)) {
992 ret = -EINVAL;
993 goto free_csraddr_str;
994 }
995
996 /* Shift register address to the right so to have u16 address */
997 pdev->csr = (csraddr >> 2);
998
999 /* Parse new CSR value and send it to IDT, if colon has been found */
1000 if (colon_ch != NULL) {
1001 ret = kstrtou32(csrval_str, 0, &csrval);
1002 if (ret != 0)
1003 goto free_csraddr_str;
1004
1005 ret = idt_csr_write(pdev, pdev->csr, csrval);
1006 if (ret != 0)
1007 goto free_csraddr_str;
1008 }
1009
1010 /* Free memory only if colon has been found */
1011free_csraddr_str:
1012 if (colon_ch != NULL)
1013 kfree(csraddr_str);
1014
1015 /* Free buffer allocated for data retrieved from User-space */
1016free_buf:
1017 kfree(buf);
1018
1019 return (ret != 0 ? ret : count);
1020}
1021
1022/*
1023 * idt_dbgfs_csr_read() - CSR debugfs-node read callback
1024 * @filep: Pointer to the file system file descriptor
1025 * @buf: Buffer to write data to
1026 * @count: Size of the buffer
1027 * @offp: Offset within the file
1028 *
1029 * It just prints the pair "0x<reg addr>:0x<value>" to passed buffer.
1030 */
1031#define CSRBUF_SIZE ((size_t)32)
1032static ssize_t idt_dbgfs_csr_read(struct file *filep, char __user *ubuf,
1033 size_t count, loff_t *offp)
1034{
1035 struct idt_89hpesx_dev *pdev = filep->private_data;
1036 u32 csraddr, csrval;
1037 char buf[CSRBUF_SIZE];
1038 int ret, size;
1039
1040 /* Perform CSR read operation */
1041 ret = idt_csr_read(pdev, pdev->csr, &csrval);
1042 if (ret != 0)
1043 return ret;
1044
1045 /* Shift register address to the left so to have real address */
1046 csraddr = ((u32)pdev->csr << 2);
1047
1048 /* Print the "0x<reg addr>:0x<value>" to buffer */
1049 size = snprintf(buf, CSRBUF_SIZE, "0x%05x:0x%08x\n",
1050 (unsigned int)csraddr, (unsigned int)csrval);
1051
1052 /* Copy data to User-space */
1053 return simple_read_from_buffer(ubuf, count, offp, buf, size);
1054}
1055
1056/*
1057 * eeprom_attribute - EEPROM sysfs-node attributes
1058 *
1059 * NOTE Size will be changed in compliance with OF node. EEPROM attribute will
1060 * be read-only as well if the corresponding flag is specified in OF node.
1061 */
1062static BIN_ATTR_RW(eeprom, EEPROM_DEF_SIZE);
1063
1064/*
1065 * csr_dbgfs_ops - CSR debugfs-node read/write operations
1066 */
1067static const struct file_operations csr_dbgfs_ops = {
1068 .owner = THIS_MODULE,
1069 .open = simple_open,
1070 .write = idt_dbgfs_csr_write,
1071 .read = idt_dbgfs_csr_read
1072};
1073
1074/*===========================================================================
1075 * Driver init/deinit methods
1076 *===========================================================================
1077 */
1078
1079/*
1080 * idt_set_defval() - disable EEPROM access by default
1081 * @pdev: Pointer to the driver data
1082 */
1083static void idt_set_defval(struct idt_89hpesx_dev *pdev)
1084{
1085 /* If OF info is missing then use next values */
1086 pdev->eesize = 0;
1087 pdev->eero = true;
1088 pdev->inieecmd = 0;
1089 pdev->eeaddr = 0;
1090}
1091
1092static const struct i2c_device_id ee_ids[];
1093
1094/*
1095 * idt_ee_match_id() - check whether the node belongs to compatible EEPROMs
1096 */
1097static const struct i2c_device_id *idt_ee_match_id(struct fwnode_handle *fwnode)
1098{
1099 const struct i2c_device_id *id = ee_ids;
1100 const char *compatible, *p;
1101 char devname[I2C_NAME_SIZE];
1102 int ret;
1103
1104 ret = fwnode_property_read_string(fwnode, "compatible", &compatible);
1105 if (ret)
1106 return NULL;
1107
1108 p = strchr(compatible, ',');
1109 strlcpy(devname, p ? p + 1 : compatible, sizeof(devname));
1110 /* Search through the device name */
1111 while (id->name[0]) {
1112 if (strcmp(devname, id->name) == 0)
1113 return id;
1114 id++;
1115 }
1116 return NULL;
1117}
1118
1119/*
1120 * idt_get_fw_data() - get IDT i2c-device parameters from device tree
1121 * @pdev: Pointer to the driver data
1122 */
1123static void idt_get_fw_data(struct idt_89hpesx_dev *pdev)
1124{
1125 struct device *dev = &pdev->client->dev;
1126 struct fwnode_handle *fwnode;
1127 const struct i2c_device_id *ee_id = NULL;
1128 u32 eeprom_addr;
1129 int ret;
1130
1131 device_for_each_child_node(dev, fwnode) {
1132 ee_id = idt_ee_match_id(fwnode);
1133 if (IS_ERR_OR_NULL(ee_id)) {
1134 dev_warn(dev, "Skip unsupported EEPROM device");
1135 continue;
1136 } else
1137 break;
1138 }
1139
1140 /* If there is no fwnode EEPROM device, then set zero size */
1141 if (!ee_id) {
1142 dev_warn(dev, "No fwnode, EEPROM access disabled");
1143 idt_set_defval(pdev);
1144 return;
1145 }
1146
1147 /* Retrieve EEPROM size */
1148 pdev->eesize = (u32)ee_id->driver_data;
1149
1150 /* Get custom EEPROM address from 'reg' attribute */
1151 ret = fwnode_property_read_u32(fwnode, "reg", &eeprom_addr);
1152 if (ret || (eeprom_addr == 0)) {
1153 dev_warn(dev, "No EEPROM reg found, use default address 0x%x",
1154 EEPROM_DEF_ADDR);
1155 pdev->inieecmd = 0;
1156 pdev->eeaddr = EEPROM_DEF_ADDR << 1;
1157 } else {
1158 pdev->inieecmd = EEPROM_USA;
1159 pdev->eeaddr = eeprom_addr << 1;
1160 }
1161
1162 /* Check EEPROM 'read-only' flag */
1163 if (fwnode_property_read_bool(fwnode, "read-only"))
1164 pdev->eero = true;
1165 else /* if (!fwnode_property_read_bool(node, "read-only")) */
1166 pdev->eero = false;
1167
1168 dev_info(dev, "EEPROM of %d bytes found by 0x%x",
1169 pdev->eesize, pdev->eeaddr);
1170}
1171
1172/*
1173 * idt_create_pdev() - create and init data structure of the driver
1174 * @client: i2c client of IDT PCIe-switch device
1175 */
1176static struct idt_89hpesx_dev *idt_create_pdev(struct i2c_client *client)
1177{
1178 struct idt_89hpesx_dev *pdev;
1179
1180 /* Allocate memory for driver data */
1181 pdev = devm_kmalloc(&client->dev, sizeof(struct idt_89hpesx_dev),
1182 GFP_KERNEL);
1183 if (pdev == NULL)
1184 return ERR_PTR(-ENOMEM);
1185
1186 /* Initialize basic fields of the data */
1187 pdev->client = client;
1188 i2c_set_clientdata(client, pdev);
1189
1190 /* Read firmware nodes information */
1191 idt_get_fw_data(pdev);
1192
1193 /* Initialize basic CSR CMD field - use full DWORD-sized r/w ops */
1194 pdev->inicsrcmd = CSR_DWE;
1195 pdev->csr = CSR_DEF;
1196
1197 /* Enable Packet Error Checking if it's supported by adapter */
1198 if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_PEC)) {
1199 pdev->iniccode = CCODE_PEC;
1200 client->flags |= I2C_CLIENT_PEC;
1201 } else /* PEC is unsupported */ {
1202 pdev->iniccode = 0;
1203 }
1204
1205 return pdev;
1206}
1207
1208/*
1209 * idt_free_pdev() - free data structure of the driver
1210 * @pdev: Pointer to the driver data
1211 */
1212static void idt_free_pdev(struct idt_89hpesx_dev *pdev)
1213{
1214 /* Clear driver data from device private field */
1215 i2c_set_clientdata(pdev->client, NULL);
1216}
1217
1218/*
1219 * idt_set_smbus_ops() - set supported SMBus operations
1220 * @pdev: Pointer to the driver data
1221 * Return status of smbus check operations
1222 */
1223static int idt_set_smbus_ops(struct idt_89hpesx_dev *pdev)
1224{
1225 struct i2c_adapter *adapter = pdev->client->adapter;
1226 struct device *dev = &pdev->client->dev;
1227
1228 /* Check i2c adapter read functionality */
1229 if (i2c_check_functionality(adapter,
1230 I2C_FUNC_SMBUS_READ_BLOCK_DATA)) {
1231 pdev->smb_read = idt_smb_read_block;
1232 dev_dbg(dev, "SMBus block-read op chosen");
1233 } else if (i2c_check_functionality(adapter,
1234 I2C_FUNC_SMBUS_READ_I2C_BLOCK)) {
1235 pdev->smb_read = idt_smb_read_i2c_block;
1236 dev_dbg(dev, "SMBus i2c-block-read op chosen");
1237 } else if (i2c_check_functionality(adapter,
1238 I2C_FUNC_SMBUS_READ_WORD_DATA) &&
1239 i2c_check_functionality(adapter,
1240 I2C_FUNC_SMBUS_READ_BYTE_DATA)) {
1241 pdev->smb_read = idt_smb_read_word;
1242 dev_warn(dev, "Use slow word/byte SMBus read ops");
1243 } else if (i2c_check_functionality(adapter,
1244 I2C_FUNC_SMBUS_READ_BYTE_DATA)) {
1245 pdev->smb_read = idt_smb_read_byte;
1246 dev_warn(dev, "Use slow byte SMBus read op");
1247 } else /* no supported smbus read operations */ {
1248 dev_err(dev, "No supported SMBus read op");
1249 return -EPFNOSUPPORT;
1250 }
1251
1252 /* Check i2c adapter write functionality */
1253 if (i2c_check_functionality(adapter,
1254 I2C_FUNC_SMBUS_WRITE_BLOCK_DATA)) {
1255 pdev->smb_write = idt_smb_write_block;
1256 dev_dbg(dev, "SMBus block-write op chosen");
1257 } else if (i2c_check_functionality(adapter,
1258 I2C_FUNC_SMBUS_WRITE_I2C_BLOCK)) {
1259 pdev->smb_write = idt_smb_write_i2c_block;
1260 dev_dbg(dev, "SMBus i2c-block-write op chosen");
1261 } else if (i2c_check_functionality(adapter,
1262 I2C_FUNC_SMBUS_WRITE_WORD_DATA) &&
1263 i2c_check_functionality(adapter,
1264 I2C_FUNC_SMBUS_WRITE_BYTE_DATA)) {
1265 pdev->smb_write = idt_smb_write_word;
1266 dev_warn(dev, "Use slow word/byte SMBus write op");
1267 } else if (i2c_check_functionality(adapter,
1268 I2C_FUNC_SMBUS_WRITE_BYTE_DATA)) {
1269 pdev->smb_write = idt_smb_write_byte;
1270 dev_warn(dev, "Use slow byte SMBus write op");
1271 } else /* no supported smbus write operations */ {
1272 dev_err(dev, "No supported SMBus write op");
1273 return -EPFNOSUPPORT;
1274 }
1275
1276 /* Initialize IDT SMBus slave interface mutex */
1277 mutex_init(&pdev->smb_mtx);
1278
1279 return 0;
1280}
1281
1282/*
1283 * idt_check_dev() - check whether it's really IDT 89HPESx device
1284 * @pdev: Pointer to the driver data
1285 * Return status of i2c adapter check operation
1286 */
1287static int idt_check_dev(struct idt_89hpesx_dev *pdev)
1288{
1289 struct device *dev = &pdev->client->dev;
1290 u32 viddid;
1291 int ret;
1292
1293 /* Read VID and DID directly from IDT memory space */
1294 ret = idt_csr_read(pdev, IDT_VIDDID_CSR, &viddid);
1295 if (ret != 0) {
1296 dev_err(dev, "Failed to read VID/DID");
1297 return ret;
1298 }
1299
1300 /* Check whether it's IDT device */
1301 if ((viddid & IDT_VID_MASK) != PCI_VENDOR_ID_IDT) {
1302 dev_err(dev, "Got unsupported VID/DID: 0x%08x", viddid);
1303 return -ENODEV;
1304 }
1305
1306 dev_info(dev, "Found IDT 89HPES device VID:0x%04x, DID:0x%04x",
1307 (viddid & IDT_VID_MASK), (viddid >> 16));
1308
1309 return 0;
1310}
1311
1312/*
1313 * idt_create_sysfs_files() - create sysfs attribute files
1314 * @pdev: Pointer to the driver data
1315 * Return status of operation
1316 */
1317static int idt_create_sysfs_files(struct idt_89hpesx_dev *pdev)
1318{
1319 struct device *dev = &pdev->client->dev;
1320 int ret;
1321
1322 /* Don't do anything if EEPROM isn't accessible */
1323 if (pdev->eesize == 0) {
1324 dev_dbg(dev, "Skip creating sysfs-files");
1325 return 0;
1326 }
1327
1328 /* Allocate memory for attribute file */
1329 pdev->ee_file = devm_kmalloc(dev, sizeof(*pdev->ee_file), GFP_KERNEL);
1330 if (!pdev->ee_file)
1331 return -ENOMEM;
1332
1333 /* Copy the declared EEPROM attr structure to change some of fields */
1334 memcpy(pdev->ee_file, &bin_attr_eeprom, sizeof(*pdev->ee_file));
1335
1336 /* In case of read-only EEPROM get rid of write ability */
1337 if (pdev->eero) {
1338 pdev->ee_file->attr.mode &= ~0200;
1339 pdev->ee_file->write = NULL;
1340 }
1341 /* Create EEPROM sysfs file */
1342 pdev->ee_file->size = pdev->eesize;
1343 ret = sysfs_create_bin_file(&dev->kobj, pdev->ee_file);
1344 if (ret != 0) {
1345 dev_err(dev, "Failed to create EEPROM sysfs-node");
1346 return ret;
1347 }
1348
1349 return 0;
1350}
1351
1352/*
1353 * idt_remove_sysfs_files() - remove sysfs attribute files
1354 * @pdev: Pointer to the driver data
1355 */
1356static void idt_remove_sysfs_files(struct idt_89hpesx_dev *pdev)
1357{
1358 struct device *dev = &pdev->client->dev;
1359
1360 /* Don't do anything if EEPROM wasn't accessible */
1361 if (pdev->eesize == 0)
1362 return;
1363
1364 /* Remove EEPROM sysfs file */
1365 sysfs_remove_bin_file(&dev->kobj, pdev->ee_file);
1366}
1367
1368/*
1369 * idt_create_dbgfs_files() - create debugfs files
1370 * @pdev: Pointer to the driver data
1371 */
1372#define CSRNAME_LEN ((size_t)32)
1373static void idt_create_dbgfs_files(struct idt_89hpesx_dev *pdev)
1374{
1375 struct i2c_client *cli = pdev->client;
1376 char fname[CSRNAME_LEN];
1377
1378 /* Create Debugfs directory for CSR file */
1379 snprintf(fname, CSRNAME_LEN, "%d-%04hx", cli->adapter->nr, cli->addr);
1380 pdev->csr_dir = debugfs_create_dir(fname, csr_dbgdir);
1381
1382 /* Create Debugfs file for CSR read/write operations */
1383 pdev->csr_file = debugfs_create_file(cli->name, 0600,
1384 pdev->csr_dir, pdev, &csr_dbgfs_ops);
1385}
1386
1387/*
1388 * idt_remove_dbgfs_files() - remove debugfs files
1389 * @pdev: Pointer to the driver data
1390 */
1391static void idt_remove_dbgfs_files(struct idt_89hpesx_dev *pdev)
1392{
1393 /* Remove CSR directory and it sysfs-node */
1394 debugfs_remove_recursive(pdev->csr_dir);
1395}
1396
1397/*
1398 * idt_probe() - IDT 89HPESx driver probe() callback method
1399 */
1400static int idt_probe(struct i2c_client *client, const struct i2c_device_id *id)
1401{
1402 struct idt_89hpesx_dev *pdev;
1403 int ret;
1404
1405 /* Create driver data */
1406 pdev = idt_create_pdev(client);
1407 if (IS_ERR(pdev))
1408 return PTR_ERR(pdev);
1409
1410 /* Set SMBus operations */
1411 ret = idt_set_smbus_ops(pdev);
1412 if (ret != 0)
1413 goto err_free_pdev;
1414
1415 /* Check whether it is truly IDT 89HPESx device */
1416 ret = idt_check_dev(pdev);
1417 if (ret != 0)
1418 goto err_free_pdev;
1419
1420 /* Create sysfs files */
1421 ret = idt_create_sysfs_files(pdev);
1422 if (ret != 0)
1423 goto err_free_pdev;
1424
1425 /* Create debugfs files */
1426 idt_create_dbgfs_files(pdev);
1427
1428 return 0;
1429
1430err_free_pdev:
1431 idt_free_pdev(pdev);
1432
1433 return ret;
1434}
1435
1436/*
1437 * idt_remove() - IDT 89HPESx driver remove() callback method
1438 */
1439static int idt_remove(struct i2c_client *client)
1440{
1441 struct idt_89hpesx_dev *pdev = i2c_get_clientdata(client);
1442
1443 /* Remove debugfs files first */
1444 idt_remove_dbgfs_files(pdev);
1445
1446 /* Remove sysfs files */
1447 idt_remove_sysfs_files(pdev);
1448
1449 /* Discard driver data structure */
1450 idt_free_pdev(pdev);
1451
1452 return 0;
1453}
1454
1455/*
1456 * ee_ids - array of supported EEPROMs
1457 */
1458static const struct i2c_device_id ee_ids[] = {
1459 { "24c32", 4096},
1460 { "24c64", 8192},
1461 { "24c128", 16384},
1462 { "24c256", 32768},
1463 { "24c512", 65536},
1464 {}
1465};
1466MODULE_DEVICE_TABLE(i2c, ee_ids);
1467
1468/*
1469 * idt_ids - supported IDT 89HPESx devices
1470 */
1471static const struct i2c_device_id idt_ids[] = {
1472 { "89hpes8nt2", 0 },
1473 { "89hpes12nt3", 0 },
1474
1475 { "89hpes24nt6ag2", 0 },
1476 { "89hpes32nt8ag2", 0 },
1477 { "89hpes32nt8bg2", 0 },
1478 { "89hpes12nt12g2", 0 },
1479 { "89hpes16nt16g2", 0 },
1480 { "89hpes24nt24g2", 0 },
1481 { "89hpes32nt24ag2", 0 },
1482 { "89hpes32nt24bg2", 0 },
1483
1484 { "89hpes12n3", 0 },
1485 { "89hpes12n3a", 0 },
1486 { "89hpes24n3", 0 },
1487 { "89hpes24n3a", 0 },
1488
1489 { "89hpes32h8", 0 },
1490 { "89hpes32h8g2", 0 },
1491 { "89hpes48h12", 0 },
1492 { "89hpes48h12g2", 0 },
1493 { "89hpes48h12ag2", 0 },
1494 { "89hpes16h16", 0 },
1495 { "89hpes22h16", 0 },
1496 { "89hpes22h16g2", 0 },
1497 { "89hpes34h16", 0 },
1498 { "89hpes34h16g2", 0 },
1499 { "89hpes64h16", 0 },
1500 { "89hpes64h16g2", 0 },
1501 { "89hpes64h16ag2", 0 },
1502
1503 /* { "89hpes3t3", 0 }, // No SMBus-slave iface */
1504 { "89hpes12t3g2", 0 },
1505 { "89hpes24t3g2", 0 },
1506 /* { "89hpes4t4", 0 }, // No SMBus-slave iface */
1507 { "89hpes16t4", 0 },
1508 { "89hpes4t4g2", 0 },
1509 { "89hpes10t4g2", 0 },
1510 { "89hpes16t4g2", 0 },
1511 { "89hpes16t4ag2", 0 },
1512 { "89hpes5t5", 0 },
1513 { "89hpes6t5", 0 },
1514 { "89hpes8t5", 0 },
1515 { "89hpes8t5a", 0 },
1516 { "89hpes24t6", 0 },
1517 { "89hpes6t6g2", 0 },
1518 { "89hpes24t6g2", 0 },
1519 { "89hpes16t7", 0 },
1520 { "89hpes32t8", 0 },
1521 { "89hpes32t8g2", 0 },
1522 { "89hpes48t12", 0 },
1523 { "89hpes48t12g2", 0 },
1524 { /* END OF LIST */ }
1525};
1526MODULE_DEVICE_TABLE(i2c, idt_ids);
1527
1528static const struct of_device_id idt_of_match[] = {
1529 { .compatible = "idt,89hpes8nt2", },
1530 { .compatible = "idt,89hpes12nt3", },
1531
1532 { .compatible = "idt,89hpes24nt6ag2", },
1533 { .compatible = "idt,89hpes32nt8ag2", },
1534 { .compatible = "idt,89hpes32nt8bg2", },
1535 { .compatible = "idt,89hpes12nt12g2", },
1536 { .compatible = "idt,89hpes16nt16g2", },
1537 { .compatible = "idt,89hpes24nt24g2", },
1538 { .compatible = "idt,89hpes32nt24ag2", },
1539 { .compatible = "idt,89hpes32nt24bg2", },
1540
1541 { .compatible = "idt,89hpes12n3", },
1542 { .compatible = "idt,89hpes12n3a", },
1543 { .compatible = "idt,89hpes24n3", },
1544 { .compatible = "idt,89hpes24n3a", },
1545
1546 { .compatible = "idt,89hpes32h8", },
1547 { .compatible = "idt,89hpes32h8g2", },
1548 { .compatible = "idt,89hpes48h12", },
1549 { .compatible = "idt,89hpes48h12g2", },
1550 { .compatible = "idt,89hpes48h12ag2", },
1551 { .compatible = "idt,89hpes16h16", },
1552 { .compatible = "idt,89hpes22h16", },
1553 { .compatible = "idt,89hpes22h16g2", },
1554 { .compatible = "idt,89hpes34h16", },
1555 { .compatible = "idt,89hpes34h16g2", },
1556 { .compatible = "idt,89hpes64h16", },
1557 { .compatible = "idt,89hpes64h16g2", },
1558 { .compatible = "idt,89hpes64h16ag2", },
1559
1560 { .compatible = "idt,89hpes12t3g2", },
1561 { .compatible = "idt,89hpes24t3g2", },
1562
1563 { .compatible = "idt,89hpes16t4", },
1564 { .compatible = "idt,89hpes4t4g2", },
1565 { .compatible = "idt,89hpes10t4g2", },
1566 { .compatible = "idt,89hpes16t4g2", },
1567 { .compatible = "idt,89hpes16t4ag2", },
1568 { .compatible = "idt,89hpes5t5", },
1569 { .compatible = "idt,89hpes6t5", },
1570 { .compatible = "idt,89hpes8t5", },
1571 { .compatible = "idt,89hpes8t5a", },
1572 { .compatible = "idt,89hpes24t6", },
1573 { .compatible = "idt,89hpes6t6g2", },
1574 { .compatible = "idt,89hpes24t6g2", },
1575 { .compatible = "idt,89hpes16t7", },
1576 { .compatible = "idt,89hpes32t8", },
1577 { .compatible = "idt,89hpes32t8g2", },
1578 { .compatible = "idt,89hpes48t12", },
1579 { .compatible = "idt,89hpes48t12g2", },
1580 { },
1581};
1582MODULE_DEVICE_TABLE(of, idt_of_match);
1583
1584/*
1585 * idt_driver - IDT 89HPESx driver structure
1586 */
1587static struct i2c_driver idt_driver = {
1588 .driver = {
1589 .name = IDT_NAME,
1590 .of_match_table = idt_of_match,
1591 },
1592 .probe = idt_probe,
1593 .remove = idt_remove,
1594 .id_table = idt_ids,
1595};
1596
1597/*
1598 * idt_init() - IDT 89HPESx driver init() callback method
1599 */
1600static int __init idt_init(void)
1601{
1602 /* Create Debugfs directory first */
1603 if (debugfs_initialized())
1604 csr_dbgdir = debugfs_create_dir("idt_csr", NULL);
1605
1606 /* Add new i2c-device driver */
1607 return i2c_add_driver(&idt_driver);
1608}
1609module_init(idt_init);
1610
1611/*
1612 * idt_exit() - IDT 89HPESx driver exit() callback method
1613 */
1614static void __exit idt_exit(void)
1615{
1616 /* Discard debugfs directory and all files if any */
1617 debugfs_remove_recursive(csr_dbgdir);
1618
1619 /* Unregister i2c-device driver */
1620 i2c_del_driver(&idt_driver);
1621}
1622module_exit(idt_exit);