Loading...
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * EMIF driver
4 *
5 * Copyright (C) 2012 Texas Instruments, Inc.
6 *
7 * Aneesh V <aneesh@ti.com>
8 * Santosh Shilimkar <santosh.shilimkar@ti.com>
9 */
10#include <linux/err.h>
11#include <linux/kernel.h>
12#include <linux/reboot.h>
13#include <linux/platform_data/emif_plat.h>
14#include <linux/io.h>
15#include <linux/device.h>
16#include <linux/platform_device.h>
17#include <linux/interrupt.h>
18#include <linux/slab.h>
19#include <linux/of.h>
20#include <linux/debugfs.h>
21#include <linux/seq_file.h>
22#include <linux/module.h>
23#include <linux/list.h>
24#include <linux/spinlock.h>
25#include <linux/pm.h>
26
27#include "emif.h"
28#include "jedec_ddr.h"
29#include "of_memory.h"
30
31/**
32 * struct emif_data - Per device static data for driver's use
33 * @duplicate: Whether the DDR devices attached to this EMIF
34 * instance are exactly same as that on EMIF1. In
35 * this case we can save some memory and processing
36 * @temperature_level: Maximum temperature of LPDDR2 devices attached
37 * to this EMIF - read from MR4 register. If there
38 * are two devices attached to this EMIF, this
39 * value is the maximum of the two temperature
40 * levels.
41 * @node: node in the device list
42 * @base: base address of memory-mapped IO registers.
43 * @dev: device pointer.
44 * @regs_cache: An array of 'struct emif_regs' that stores
45 * calculated register values for different
46 * frequencies, to avoid re-calculating them on
47 * each DVFS transition.
48 * @curr_regs: The set of register values used in the last
49 * frequency change (i.e. corresponding to the
50 * frequency in effect at the moment)
51 * @plat_data: Pointer to saved platform data.
52 * @debugfs_root: dentry to the root folder for EMIF in debugfs
53 * @np_ddr: Pointer to ddr device tree node
54 */
55struct emif_data {
56 u8 duplicate;
57 u8 temperature_level;
58 u8 lpmode;
59 struct list_head node;
60 unsigned long irq_state;
61 void __iomem *base;
62 struct device *dev;
63 struct emif_regs *regs_cache[EMIF_MAX_NUM_FREQUENCIES];
64 struct emif_regs *curr_regs;
65 struct emif_platform_data *plat_data;
66 struct dentry *debugfs_root;
67 struct device_node *np_ddr;
68};
69
70static struct emif_data *emif1;
71static DEFINE_SPINLOCK(emif_lock);
72static unsigned long irq_state;
73static LIST_HEAD(device_list);
74
75#ifdef CONFIG_DEBUG_FS
76static void do_emif_regdump_show(struct seq_file *s, struct emif_data *emif,
77 struct emif_regs *regs)
78{
79 u32 type = emif->plat_data->device_info->type;
80 u32 ip_rev = emif->plat_data->ip_rev;
81
82 seq_printf(s, "EMIF register cache dump for %dMHz\n",
83 regs->freq/1000000);
84
85 seq_printf(s, "ref_ctrl_shdw\t: 0x%08x\n", regs->ref_ctrl_shdw);
86 seq_printf(s, "sdram_tim1_shdw\t: 0x%08x\n", regs->sdram_tim1_shdw);
87 seq_printf(s, "sdram_tim2_shdw\t: 0x%08x\n", regs->sdram_tim2_shdw);
88 seq_printf(s, "sdram_tim3_shdw\t: 0x%08x\n", regs->sdram_tim3_shdw);
89
90 if (ip_rev == EMIF_4D) {
91 seq_printf(s, "read_idle_ctrl_shdw_normal\t: 0x%08x\n",
92 regs->read_idle_ctrl_shdw_normal);
93 seq_printf(s, "read_idle_ctrl_shdw_volt_ramp\t: 0x%08x\n",
94 regs->read_idle_ctrl_shdw_volt_ramp);
95 } else if (ip_rev == EMIF_4D5) {
96 seq_printf(s, "dll_calib_ctrl_shdw_normal\t: 0x%08x\n",
97 regs->dll_calib_ctrl_shdw_normal);
98 seq_printf(s, "dll_calib_ctrl_shdw_volt_ramp\t: 0x%08x\n",
99 regs->dll_calib_ctrl_shdw_volt_ramp);
100 }
101
102 if (type == DDR_TYPE_LPDDR2_S2 || type == DDR_TYPE_LPDDR2_S4) {
103 seq_printf(s, "ref_ctrl_shdw_derated\t: 0x%08x\n",
104 regs->ref_ctrl_shdw_derated);
105 seq_printf(s, "sdram_tim1_shdw_derated\t: 0x%08x\n",
106 regs->sdram_tim1_shdw_derated);
107 seq_printf(s, "sdram_tim3_shdw_derated\t: 0x%08x\n",
108 regs->sdram_tim3_shdw_derated);
109 }
110}
111
112static int emif_regdump_show(struct seq_file *s, void *unused)
113{
114 struct emif_data *emif = s->private;
115 struct emif_regs **regs_cache;
116 int i;
117
118 if (emif->duplicate)
119 regs_cache = emif1->regs_cache;
120 else
121 regs_cache = emif->regs_cache;
122
123 for (i = 0; i < EMIF_MAX_NUM_FREQUENCIES && regs_cache[i]; i++) {
124 do_emif_regdump_show(s, emif, regs_cache[i]);
125 seq_putc(s, '\n');
126 }
127
128 return 0;
129}
130
131DEFINE_SHOW_ATTRIBUTE(emif_regdump);
132
133static int emif_mr4_show(struct seq_file *s, void *unused)
134{
135 struct emif_data *emif = s->private;
136
137 seq_printf(s, "MR4=%d\n", emif->temperature_level);
138 return 0;
139}
140
141DEFINE_SHOW_ATTRIBUTE(emif_mr4);
142
143static int __init_or_module emif_debugfs_init(struct emif_data *emif)
144{
145 emif->debugfs_root = debugfs_create_dir(dev_name(emif->dev), NULL);
146 debugfs_create_file("regcache_dump", S_IRUGO, emif->debugfs_root, emif,
147 &emif_regdump_fops);
148 debugfs_create_file("mr4", S_IRUGO, emif->debugfs_root, emif,
149 &emif_mr4_fops);
150 return 0;
151}
152
153static void __exit emif_debugfs_exit(struct emif_data *emif)
154{
155 debugfs_remove_recursive(emif->debugfs_root);
156 emif->debugfs_root = NULL;
157}
158#else
159static inline int __init_or_module emif_debugfs_init(struct emif_data *emif)
160{
161 return 0;
162}
163
164static inline void __exit emif_debugfs_exit(struct emif_data *emif)
165{
166}
167#endif
168
169/*
170 * Get bus width used by EMIF. Note that this may be different from the
171 * bus width of the DDR devices used. For instance two 16-bit DDR devices
172 * may be connected to a given CS of EMIF. In this case bus width as far
173 * as EMIF is concerned is 32, where as the DDR bus width is 16 bits.
174 */
175static u32 get_emif_bus_width(struct emif_data *emif)
176{
177 u32 width;
178 void __iomem *base = emif->base;
179
180 width = (readl(base + EMIF_SDRAM_CONFIG) & NARROW_MODE_MASK)
181 >> NARROW_MODE_SHIFT;
182 width = width == 0 ? 32 : 16;
183
184 return width;
185}
186
187static void set_lpmode(struct emif_data *emif, u8 lpmode)
188{
189 u32 temp;
190 void __iomem *base = emif->base;
191
192 /*
193 * Workaround for errata i743 - LPDDR2 Power-Down State is Not
194 * Efficient
195 *
196 * i743 DESCRIPTION:
197 * The EMIF supports power-down state for low power. The EMIF
198 * automatically puts the SDRAM into power-down after the memory is
199 * not accessed for a defined number of cycles and the
200 * EMIF_PWR_MGMT_CTRL[10:8] REG_LP_MODE bit field is set to 0x4.
201 * As the EMIF supports automatic output impedance calibration, a ZQ
202 * calibration long command is issued every time it exits active
203 * power-down and precharge power-down modes. The EMIF waits and
204 * blocks any other command during this calibration.
205 * The EMIF does not allow selective disabling of ZQ calibration upon
206 * exit of power-down mode. Due to very short periods of power-down
207 * cycles, ZQ calibration overhead creates bandwidth issues and
208 * increases overall system power consumption. On the other hand,
209 * issuing ZQ calibration long commands when exiting self-refresh is
210 * still required.
211 *
212 * WORKAROUND
213 * Because there is no power consumption benefit of the power-down due
214 * to the calibration and there is a performance risk, the guideline
215 * is to not allow power-down state and, therefore, to not have set
216 * the EMIF_PWR_MGMT_CTRL[10:8] REG_LP_MODE bit field to 0x4.
217 */
218 if ((emif->plat_data->ip_rev == EMIF_4D) &&
219 (lpmode == EMIF_LP_MODE_PWR_DN)) {
220 WARN_ONCE(1,
221 "REG_LP_MODE = LP_MODE_PWR_DN(4) is prohibited by erratum i743 switch to LP_MODE_SELF_REFRESH(2)\n");
222 /* rollback LP_MODE to Self-refresh mode */
223 lpmode = EMIF_LP_MODE_SELF_REFRESH;
224 }
225
226 temp = readl(base + EMIF_POWER_MANAGEMENT_CONTROL);
227 temp &= ~LP_MODE_MASK;
228 temp |= (lpmode << LP_MODE_SHIFT);
229 writel(temp, base + EMIF_POWER_MANAGEMENT_CONTROL);
230}
231
232static void do_freq_update(void)
233{
234 struct emif_data *emif;
235
236 /*
237 * Workaround for errata i728: Disable LPMODE during FREQ_UPDATE
238 *
239 * i728 DESCRIPTION:
240 * The EMIF automatically puts the SDRAM into self-refresh mode
241 * after the EMIF has not performed accesses during
242 * EMIF_PWR_MGMT_CTRL[7:4] REG_SR_TIM number of DDR clock cycles
243 * and the EMIF_PWR_MGMT_CTRL[10:8] REG_LP_MODE bit field is set
244 * to 0x2. If during a small window the following three events
245 * occur:
246 * - The SR_TIMING counter expires
247 * - And frequency change is requested
248 * - And OCP access is requested
249 * Then it causes instable clock on the DDR interface.
250 *
251 * WORKAROUND
252 * To avoid the occurrence of the three events, the workaround
253 * is to disable the self-refresh when requesting a frequency
254 * change. Before requesting a frequency change the software must
255 * program EMIF_PWR_MGMT_CTRL[10:8] REG_LP_MODE to 0x0. When the
256 * frequency change has been done, the software can reprogram
257 * EMIF_PWR_MGMT_CTRL[10:8] REG_LP_MODE to 0x2
258 */
259 list_for_each_entry(emif, &device_list, node) {
260 if (emif->lpmode == EMIF_LP_MODE_SELF_REFRESH)
261 set_lpmode(emif, EMIF_LP_MODE_DISABLE);
262 }
263
264 /*
265 * TODO: Do FREQ_UPDATE here when an API
266 * is available for this as part of the new
267 * clock framework
268 */
269
270 list_for_each_entry(emif, &device_list, node) {
271 if (emif->lpmode == EMIF_LP_MODE_SELF_REFRESH)
272 set_lpmode(emif, EMIF_LP_MODE_SELF_REFRESH);
273 }
274}
275
276/* Find addressing table entry based on the device's type and density */
277static const struct lpddr2_addressing *get_addressing_table(
278 const struct ddr_device_info *device_info)
279{
280 u32 index, type, density;
281
282 type = device_info->type;
283 density = device_info->density;
284
285 switch (type) {
286 case DDR_TYPE_LPDDR2_S4:
287 index = density - 1;
288 break;
289 case DDR_TYPE_LPDDR2_S2:
290 switch (density) {
291 case DDR_DENSITY_1Gb:
292 case DDR_DENSITY_2Gb:
293 index = density + 3;
294 break;
295 default:
296 index = density - 1;
297 }
298 break;
299 default:
300 return NULL;
301 }
302
303 return &lpddr2_jedec_addressing_table[index];
304}
305
306static u32 get_zq_config_reg(const struct lpddr2_addressing *addressing,
307 bool cs1_used, bool cal_resistors_per_cs)
308{
309 u32 zq = 0, val = 0;
310
311 val = EMIF_ZQCS_INTERVAL_US * 1000 / addressing->tREFI_ns;
312 zq |= val << ZQ_REFINTERVAL_SHIFT;
313
314 val = DIV_ROUND_UP(T_ZQCL_DEFAULT_NS, T_ZQCS_DEFAULT_NS) - 1;
315 zq |= val << ZQ_ZQCL_MULT_SHIFT;
316
317 val = DIV_ROUND_UP(T_ZQINIT_DEFAULT_NS, T_ZQCL_DEFAULT_NS) - 1;
318 zq |= val << ZQ_ZQINIT_MULT_SHIFT;
319
320 zq |= ZQ_SFEXITEN_ENABLE << ZQ_SFEXITEN_SHIFT;
321
322 if (cal_resistors_per_cs)
323 zq |= ZQ_DUALCALEN_ENABLE << ZQ_DUALCALEN_SHIFT;
324 else
325 zq |= ZQ_DUALCALEN_DISABLE << ZQ_DUALCALEN_SHIFT;
326
327 zq |= ZQ_CS0EN_MASK; /* CS0 is used for sure */
328
329 val = cs1_used ? 1 : 0;
330 zq |= val << ZQ_CS1EN_SHIFT;
331
332 return zq;
333}
334
335static u32 get_temp_alert_config(const struct lpddr2_addressing *addressing,
336 const struct emif_custom_configs *custom_configs, bool cs1_used,
337 u32 sdram_io_width, u32 emif_bus_width)
338{
339 u32 alert = 0, interval, devcnt;
340
341 if (custom_configs && (custom_configs->mask &
342 EMIF_CUSTOM_CONFIG_TEMP_ALERT_POLL_INTERVAL))
343 interval = custom_configs->temp_alert_poll_interval_ms;
344 else
345 interval = TEMP_ALERT_POLL_INTERVAL_DEFAULT_MS;
346
347 interval *= 1000000; /* Convert to ns */
348 interval /= addressing->tREFI_ns; /* Convert to refresh cycles */
349 alert |= (interval << TA_REFINTERVAL_SHIFT);
350
351 /*
352 * sdram_io_width is in 'log2(x) - 1' form. Convert emif_bus_width
353 * also to this form and subtract to get TA_DEVCNT, which is
354 * in log2(x) form.
355 */
356 emif_bus_width = __fls(emif_bus_width) - 1;
357 devcnt = emif_bus_width - sdram_io_width;
358 alert |= devcnt << TA_DEVCNT_SHIFT;
359
360 /* DEVWDT is in 'log2(x) - 3' form */
361 alert |= (sdram_io_width - 2) << TA_DEVWDT_SHIFT;
362
363 alert |= 1 << TA_SFEXITEN_SHIFT;
364 alert |= 1 << TA_CS0EN_SHIFT;
365 alert |= (cs1_used ? 1 : 0) << TA_CS1EN_SHIFT;
366
367 return alert;
368}
369
370static u32 get_pwr_mgmt_ctrl(u32 freq, struct emif_data *emif, u32 ip_rev)
371{
372 u32 pwr_mgmt_ctrl = 0, timeout;
373 u32 lpmode = EMIF_LP_MODE_SELF_REFRESH;
374 u32 timeout_perf = EMIF_LP_MODE_TIMEOUT_PERFORMANCE;
375 u32 timeout_pwr = EMIF_LP_MODE_TIMEOUT_POWER;
376 u32 freq_threshold = EMIF_LP_MODE_FREQ_THRESHOLD;
377 u32 mask;
378 u8 shift;
379
380 struct emif_custom_configs *cust_cfgs = emif->plat_data->custom_configs;
381
382 if (cust_cfgs && (cust_cfgs->mask & EMIF_CUSTOM_CONFIG_LPMODE)) {
383 lpmode = cust_cfgs->lpmode;
384 timeout_perf = cust_cfgs->lpmode_timeout_performance;
385 timeout_pwr = cust_cfgs->lpmode_timeout_power;
386 freq_threshold = cust_cfgs->lpmode_freq_threshold;
387 }
388
389 /* Timeout based on DDR frequency */
390 timeout = freq >= freq_threshold ? timeout_perf : timeout_pwr;
391
392 /*
393 * The value to be set in register is "log2(timeout) - 3"
394 * if timeout < 16 load 0 in register
395 * if timeout is not a power of 2, round to next highest power of 2
396 */
397 if (timeout < 16) {
398 timeout = 0;
399 } else {
400 if (timeout & (timeout - 1))
401 timeout <<= 1;
402 timeout = __fls(timeout) - 3;
403 }
404
405 switch (lpmode) {
406 case EMIF_LP_MODE_CLOCK_STOP:
407 shift = CS_TIM_SHIFT;
408 mask = CS_TIM_MASK;
409 break;
410 case EMIF_LP_MODE_SELF_REFRESH:
411 /* Workaround for errata i735 */
412 if (timeout < 6)
413 timeout = 6;
414
415 shift = SR_TIM_SHIFT;
416 mask = SR_TIM_MASK;
417 break;
418 case EMIF_LP_MODE_PWR_DN:
419 shift = PD_TIM_SHIFT;
420 mask = PD_TIM_MASK;
421 break;
422 case EMIF_LP_MODE_DISABLE:
423 default:
424 mask = 0;
425 shift = 0;
426 break;
427 }
428 /* Round to maximum in case of overflow, BUT warn! */
429 if (lpmode != EMIF_LP_MODE_DISABLE && timeout > mask >> shift) {
430 pr_err("TIMEOUT Overflow - lpmode=%d perf=%d pwr=%d freq=%d\n",
431 lpmode,
432 timeout_perf,
433 timeout_pwr,
434 freq_threshold);
435 WARN(1, "timeout=0x%02x greater than 0x%02x. Using max\n",
436 timeout, mask >> shift);
437 timeout = mask >> shift;
438 }
439
440 /* Setup required timing */
441 pwr_mgmt_ctrl = (timeout << shift) & mask;
442 /* setup a default mask for rest of the modes */
443 pwr_mgmt_ctrl |= (SR_TIM_MASK | CS_TIM_MASK | PD_TIM_MASK) &
444 ~mask;
445
446 /* No CS_TIM in EMIF_4D5 */
447 if (ip_rev == EMIF_4D5)
448 pwr_mgmt_ctrl &= ~CS_TIM_MASK;
449
450 pwr_mgmt_ctrl |= lpmode << LP_MODE_SHIFT;
451
452 return pwr_mgmt_ctrl;
453}
454
455/*
456 * Get the temperature level of the EMIF instance:
457 * Reads the MR4 register of attached SDRAM parts to find out the temperature
458 * level. If there are two parts attached(one on each CS), then the temperature
459 * level for the EMIF instance is the higher of the two temperatures.
460 */
461static void get_temperature_level(struct emif_data *emif)
462{
463 u32 temp, temperature_level;
464 void __iomem *base;
465
466 base = emif->base;
467
468 /* Read mode register 4 */
469 writel(DDR_MR4, base + EMIF_LPDDR2_MODE_REG_CONFIG);
470 temperature_level = readl(base + EMIF_LPDDR2_MODE_REG_DATA);
471 temperature_level = (temperature_level & MR4_SDRAM_REF_RATE_MASK) >>
472 MR4_SDRAM_REF_RATE_SHIFT;
473
474 if (emif->plat_data->device_info->cs1_used) {
475 writel(DDR_MR4 | CS_MASK, base + EMIF_LPDDR2_MODE_REG_CONFIG);
476 temp = readl(base + EMIF_LPDDR2_MODE_REG_DATA);
477 temp = (temp & MR4_SDRAM_REF_RATE_MASK)
478 >> MR4_SDRAM_REF_RATE_SHIFT;
479 temperature_level = max(temp, temperature_level);
480 }
481
482 /* treat everything less than nominal(3) in MR4 as nominal */
483 if (unlikely(temperature_level < SDRAM_TEMP_NOMINAL))
484 temperature_level = SDRAM_TEMP_NOMINAL;
485
486 /* if we get reserved value in MR4 persist with the existing value */
487 if (likely(temperature_level != SDRAM_TEMP_RESERVED_4))
488 emif->temperature_level = temperature_level;
489}
490
491/*
492 * setup_temperature_sensitive_regs() - set the timings for temperature
493 * sensitive registers. This happens once at initialisation time based
494 * on the temperature at boot time and subsequently based on the temperature
495 * alert interrupt. Temperature alert can happen when the temperature
496 * increases or drops. So this function can have the effect of either
497 * derating the timings or going back to nominal values.
498 */
499static void setup_temperature_sensitive_regs(struct emif_data *emif,
500 struct emif_regs *regs)
501{
502 u32 tim1, tim3, ref_ctrl, type;
503 void __iomem *base = emif->base;
504 u32 temperature;
505
506 type = emif->plat_data->device_info->type;
507
508 tim1 = regs->sdram_tim1_shdw;
509 tim3 = regs->sdram_tim3_shdw;
510 ref_ctrl = regs->ref_ctrl_shdw;
511
512 /* No de-rating for non-lpddr2 devices */
513 if (type != DDR_TYPE_LPDDR2_S2 && type != DDR_TYPE_LPDDR2_S4)
514 goto out;
515
516 temperature = emif->temperature_level;
517 if (temperature == SDRAM_TEMP_HIGH_DERATE_REFRESH) {
518 ref_ctrl = regs->ref_ctrl_shdw_derated;
519 } else if (temperature == SDRAM_TEMP_HIGH_DERATE_REFRESH_AND_TIMINGS) {
520 tim1 = regs->sdram_tim1_shdw_derated;
521 tim3 = regs->sdram_tim3_shdw_derated;
522 ref_ctrl = regs->ref_ctrl_shdw_derated;
523 }
524
525out:
526 writel(tim1, base + EMIF_SDRAM_TIMING_1_SHDW);
527 writel(tim3, base + EMIF_SDRAM_TIMING_3_SHDW);
528 writel(ref_ctrl, base + EMIF_SDRAM_REFRESH_CTRL_SHDW);
529}
530
531static irqreturn_t handle_temp_alert(void __iomem *base, struct emif_data *emif)
532{
533 u32 old_temp_level;
534 irqreturn_t ret = IRQ_HANDLED;
535 struct emif_custom_configs *custom_configs;
536
537 spin_lock_irqsave(&emif_lock, irq_state);
538 old_temp_level = emif->temperature_level;
539 get_temperature_level(emif);
540
541 if (unlikely(emif->temperature_level == old_temp_level)) {
542 goto out;
543 } else if (!emif->curr_regs) {
544 dev_err(emif->dev, "temperature alert before registers are calculated, not de-rating timings\n");
545 goto out;
546 }
547
548 custom_configs = emif->plat_data->custom_configs;
549
550 /*
551 * IF we detect higher than "nominal rating" from DDR sensor
552 * on an unsupported DDR part, shutdown system
553 */
554 if (custom_configs && !(custom_configs->mask &
555 EMIF_CUSTOM_CONFIG_EXTENDED_TEMP_PART)) {
556 if (emif->temperature_level >= SDRAM_TEMP_HIGH_DERATE_REFRESH) {
557 dev_err(emif->dev,
558 "%s:NOT Extended temperature capable memory. Converting MR4=0x%02x as shutdown event\n",
559 __func__, emif->temperature_level);
560 /*
561 * Temperature far too high - do kernel_power_off()
562 * from thread context
563 */
564 emif->temperature_level = SDRAM_TEMP_VERY_HIGH_SHUTDOWN;
565 ret = IRQ_WAKE_THREAD;
566 goto out;
567 }
568 }
569
570 if (emif->temperature_level < old_temp_level ||
571 emif->temperature_level == SDRAM_TEMP_VERY_HIGH_SHUTDOWN) {
572 /*
573 * Temperature coming down - defer handling to thread OR
574 * Temperature far too high - do kernel_power_off() from
575 * thread context
576 */
577 ret = IRQ_WAKE_THREAD;
578 } else {
579 /* Temperature is going up - handle immediately */
580 setup_temperature_sensitive_regs(emif, emif->curr_regs);
581 do_freq_update();
582 }
583
584out:
585 spin_unlock_irqrestore(&emif_lock, irq_state);
586 return ret;
587}
588
589static irqreturn_t emif_interrupt_handler(int irq, void *dev_id)
590{
591 u32 interrupts;
592 struct emif_data *emif = dev_id;
593 void __iomem *base = emif->base;
594 struct device *dev = emif->dev;
595 irqreturn_t ret = IRQ_HANDLED;
596
597 /* Save the status and clear it */
598 interrupts = readl(base + EMIF_SYSTEM_OCP_INTERRUPT_STATUS);
599 writel(interrupts, base + EMIF_SYSTEM_OCP_INTERRUPT_STATUS);
600
601 /*
602 * Handle temperature alert
603 * Temperature alert should be same for all ports
604 * So, it's enough to process it only for one of the ports
605 */
606 if (interrupts & TA_SYS_MASK)
607 ret = handle_temp_alert(base, emif);
608
609 if (interrupts & ERR_SYS_MASK)
610 dev_err(dev, "Access error from SYS port - %x\n", interrupts);
611
612 if (emif->plat_data->hw_caps & EMIF_HW_CAPS_LL_INTERFACE) {
613 /* Save the status and clear it */
614 interrupts = readl(base + EMIF_LL_OCP_INTERRUPT_STATUS);
615 writel(interrupts, base + EMIF_LL_OCP_INTERRUPT_STATUS);
616
617 if (interrupts & ERR_LL_MASK)
618 dev_err(dev, "Access error from LL port - %x\n",
619 interrupts);
620 }
621
622 return ret;
623}
624
625static irqreturn_t emif_threaded_isr(int irq, void *dev_id)
626{
627 struct emif_data *emif = dev_id;
628
629 if (emif->temperature_level == SDRAM_TEMP_VERY_HIGH_SHUTDOWN) {
630 dev_emerg(emif->dev, "SDRAM temperature exceeds operating limit.. Needs shut down!!!\n");
631
632 /* If we have Power OFF ability, use it, else try restarting */
633 if (kernel_can_power_off()) {
634 kernel_power_off();
635 } else {
636 WARN(1, "FIXME: NO pm_power_off!!! trying restart\n");
637 kernel_restart("SDRAM Over-temp Emergency restart");
638 }
639 return IRQ_HANDLED;
640 }
641
642 spin_lock_irqsave(&emif_lock, irq_state);
643
644 if (emif->curr_regs) {
645 setup_temperature_sensitive_regs(emif, emif->curr_regs);
646 do_freq_update();
647 } else {
648 dev_err(emif->dev, "temperature alert before registers are calculated, not de-rating timings\n");
649 }
650
651 spin_unlock_irqrestore(&emif_lock, irq_state);
652
653 return IRQ_HANDLED;
654}
655
656static void clear_all_interrupts(struct emif_data *emif)
657{
658 void __iomem *base = emif->base;
659
660 writel(readl(base + EMIF_SYSTEM_OCP_INTERRUPT_STATUS),
661 base + EMIF_SYSTEM_OCP_INTERRUPT_STATUS);
662 if (emif->plat_data->hw_caps & EMIF_HW_CAPS_LL_INTERFACE)
663 writel(readl(base + EMIF_LL_OCP_INTERRUPT_STATUS),
664 base + EMIF_LL_OCP_INTERRUPT_STATUS);
665}
666
667static void disable_and_clear_all_interrupts(struct emif_data *emif)
668{
669 void __iomem *base = emif->base;
670
671 /* Disable all interrupts */
672 writel(readl(base + EMIF_SYSTEM_OCP_INTERRUPT_ENABLE_SET),
673 base + EMIF_SYSTEM_OCP_INTERRUPT_ENABLE_CLEAR);
674 if (emif->plat_data->hw_caps & EMIF_HW_CAPS_LL_INTERFACE)
675 writel(readl(base + EMIF_LL_OCP_INTERRUPT_ENABLE_SET),
676 base + EMIF_LL_OCP_INTERRUPT_ENABLE_CLEAR);
677
678 /* Clear all interrupts */
679 clear_all_interrupts(emif);
680}
681
682static int __init_or_module setup_interrupts(struct emif_data *emif, u32 irq)
683{
684 u32 interrupts, type;
685 void __iomem *base = emif->base;
686
687 type = emif->plat_data->device_info->type;
688
689 clear_all_interrupts(emif);
690
691 /* Enable interrupts for SYS interface */
692 interrupts = EN_ERR_SYS_MASK;
693 if (type == DDR_TYPE_LPDDR2_S2 || type == DDR_TYPE_LPDDR2_S4)
694 interrupts |= EN_TA_SYS_MASK;
695 writel(interrupts, base + EMIF_SYSTEM_OCP_INTERRUPT_ENABLE_SET);
696
697 /* Enable interrupts for LL interface */
698 if (emif->plat_data->hw_caps & EMIF_HW_CAPS_LL_INTERFACE) {
699 /* TA need not be enabled for LL */
700 interrupts = EN_ERR_LL_MASK;
701 writel(interrupts, base + EMIF_LL_OCP_INTERRUPT_ENABLE_SET);
702 }
703
704 /* setup IRQ handlers */
705 return devm_request_threaded_irq(emif->dev, irq,
706 emif_interrupt_handler,
707 emif_threaded_isr,
708 0, dev_name(emif->dev),
709 emif);
710
711}
712
713static void __init_or_module emif_onetime_settings(struct emif_data *emif)
714{
715 u32 pwr_mgmt_ctrl, zq, temp_alert_cfg;
716 void __iomem *base = emif->base;
717 const struct lpddr2_addressing *addressing;
718 const struct ddr_device_info *device_info;
719
720 device_info = emif->plat_data->device_info;
721 addressing = get_addressing_table(device_info);
722
723 /*
724 * Init power management settings
725 * We don't know the frequency yet. Use a high frequency
726 * value for a conservative timeout setting
727 */
728 pwr_mgmt_ctrl = get_pwr_mgmt_ctrl(1000000000, emif,
729 emif->plat_data->ip_rev);
730 emif->lpmode = (pwr_mgmt_ctrl & LP_MODE_MASK) >> LP_MODE_SHIFT;
731 writel(pwr_mgmt_ctrl, base + EMIF_POWER_MANAGEMENT_CONTROL);
732
733 /* Init ZQ calibration settings */
734 zq = get_zq_config_reg(addressing, device_info->cs1_used,
735 device_info->cal_resistors_per_cs);
736 writel(zq, base + EMIF_SDRAM_OUTPUT_IMPEDANCE_CALIBRATION_CONFIG);
737
738 /* Check temperature level temperature level*/
739 get_temperature_level(emif);
740 if (emif->temperature_level == SDRAM_TEMP_VERY_HIGH_SHUTDOWN)
741 dev_emerg(emif->dev, "SDRAM temperature exceeds operating limit.. Needs shut down!!!\n");
742
743 /* Init temperature polling */
744 temp_alert_cfg = get_temp_alert_config(addressing,
745 emif->plat_data->custom_configs, device_info->cs1_used,
746 device_info->io_width, get_emif_bus_width(emif));
747 writel(temp_alert_cfg, base + EMIF_TEMPERATURE_ALERT_CONFIG);
748
749 /*
750 * Program external PHY control registers that are not frequency
751 * dependent
752 */
753 if (emif->plat_data->phy_type != EMIF_PHY_TYPE_INTELLIPHY)
754 return;
755 writel(EMIF_EXT_PHY_CTRL_1_VAL, base + EMIF_EXT_PHY_CTRL_1_SHDW);
756 writel(EMIF_EXT_PHY_CTRL_5_VAL, base + EMIF_EXT_PHY_CTRL_5_SHDW);
757 writel(EMIF_EXT_PHY_CTRL_6_VAL, base + EMIF_EXT_PHY_CTRL_6_SHDW);
758 writel(EMIF_EXT_PHY_CTRL_7_VAL, base + EMIF_EXT_PHY_CTRL_7_SHDW);
759 writel(EMIF_EXT_PHY_CTRL_8_VAL, base + EMIF_EXT_PHY_CTRL_8_SHDW);
760 writel(EMIF_EXT_PHY_CTRL_9_VAL, base + EMIF_EXT_PHY_CTRL_9_SHDW);
761 writel(EMIF_EXT_PHY_CTRL_10_VAL, base + EMIF_EXT_PHY_CTRL_10_SHDW);
762 writel(EMIF_EXT_PHY_CTRL_11_VAL, base + EMIF_EXT_PHY_CTRL_11_SHDW);
763 writel(EMIF_EXT_PHY_CTRL_12_VAL, base + EMIF_EXT_PHY_CTRL_12_SHDW);
764 writel(EMIF_EXT_PHY_CTRL_13_VAL, base + EMIF_EXT_PHY_CTRL_13_SHDW);
765 writel(EMIF_EXT_PHY_CTRL_14_VAL, base + EMIF_EXT_PHY_CTRL_14_SHDW);
766 writel(EMIF_EXT_PHY_CTRL_15_VAL, base + EMIF_EXT_PHY_CTRL_15_SHDW);
767 writel(EMIF_EXT_PHY_CTRL_16_VAL, base + EMIF_EXT_PHY_CTRL_16_SHDW);
768 writel(EMIF_EXT_PHY_CTRL_17_VAL, base + EMIF_EXT_PHY_CTRL_17_SHDW);
769 writel(EMIF_EXT_PHY_CTRL_18_VAL, base + EMIF_EXT_PHY_CTRL_18_SHDW);
770 writel(EMIF_EXT_PHY_CTRL_19_VAL, base + EMIF_EXT_PHY_CTRL_19_SHDW);
771 writel(EMIF_EXT_PHY_CTRL_20_VAL, base + EMIF_EXT_PHY_CTRL_20_SHDW);
772 writel(EMIF_EXT_PHY_CTRL_21_VAL, base + EMIF_EXT_PHY_CTRL_21_SHDW);
773 writel(EMIF_EXT_PHY_CTRL_22_VAL, base + EMIF_EXT_PHY_CTRL_22_SHDW);
774 writel(EMIF_EXT_PHY_CTRL_23_VAL, base + EMIF_EXT_PHY_CTRL_23_SHDW);
775 writel(EMIF_EXT_PHY_CTRL_24_VAL, base + EMIF_EXT_PHY_CTRL_24_SHDW);
776}
777
778static void get_default_timings(struct emif_data *emif)
779{
780 struct emif_platform_data *pd = emif->plat_data;
781
782 pd->timings = lpddr2_jedec_timings;
783 pd->timings_arr_size = ARRAY_SIZE(lpddr2_jedec_timings);
784
785 dev_warn(emif->dev, "%s: using default timings\n", __func__);
786}
787
788static int is_dev_data_valid(u32 type, u32 density, u32 io_width, u32 phy_type,
789 u32 ip_rev, struct device *dev)
790{
791 int valid;
792
793 valid = (type == DDR_TYPE_LPDDR2_S4 ||
794 type == DDR_TYPE_LPDDR2_S2)
795 && (density >= DDR_DENSITY_64Mb
796 && density <= DDR_DENSITY_8Gb)
797 && (io_width >= DDR_IO_WIDTH_8
798 && io_width <= DDR_IO_WIDTH_32);
799
800 /* Combinations of EMIF and PHY revisions that we support today */
801 switch (ip_rev) {
802 case EMIF_4D:
803 valid = valid && (phy_type == EMIF_PHY_TYPE_ATTILAPHY);
804 break;
805 case EMIF_4D5:
806 valid = valid && (phy_type == EMIF_PHY_TYPE_INTELLIPHY);
807 break;
808 default:
809 valid = 0;
810 }
811
812 if (!valid)
813 dev_err(dev, "%s: invalid DDR details\n", __func__);
814 return valid;
815}
816
817static int is_custom_config_valid(struct emif_custom_configs *cust_cfgs,
818 struct device *dev)
819{
820 int valid = 1;
821
822 if ((cust_cfgs->mask & EMIF_CUSTOM_CONFIG_LPMODE) &&
823 (cust_cfgs->lpmode != EMIF_LP_MODE_DISABLE))
824 valid = cust_cfgs->lpmode_freq_threshold &&
825 cust_cfgs->lpmode_timeout_performance &&
826 cust_cfgs->lpmode_timeout_power;
827
828 if (cust_cfgs->mask & EMIF_CUSTOM_CONFIG_TEMP_ALERT_POLL_INTERVAL)
829 valid = valid && cust_cfgs->temp_alert_poll_interval_ms;
830
831 if (!valid)
832 dev_warn(dev, "%s: invalid custom configs\n", __func__);
833
834 return valid;
835}
836
837#if defined(CONFIG_OF)
838static void __init_or_module of_get_custom_configs(struct device_node *np_emif,
839 struct emif_data *emif)
840{
841 struct emif_custom_configs *cust_cfgs = NULL;
842 int len;
843 const __be32 *lpmode, *poll_intvl;
844
845 lpmode = of_get_property(np_emif, "low-power-mode", &len);
846 poll_intvl = of_get_property(np_emif, "temp-alert-poll-interval", &len);
847
848 if (lpmode || poll_intvl)
849 cust_cfgs = devm_kzalloc(emif->dev, sizeof(*cust_cfgs),
850 GFP_KERNEL);
851
852 if (!cust_cfgs)
853 return;
854
855 if (lpmode) {
856 cust_cfgs->mask |= EMIF_CUSTOM_CONFIG_LPMODE;
857 cust_cfgs->lpmode = be32_to_cpup(lpmode);
858 of_property_read_u32(np_emif,
859 "low-power-mode-timeout-performance",
860 &cust_cfgs->lpmode_timeout_performance);
861 of_property_read_u32(np_emif,
862 "low-power-mode-timeout-power",
863 &cust_cfgs->lpmode_timeout_power);
864 of_property_read_u32(np_emif,
865 "low-power-mode-freq-threshold",
866 &cust_cfgs->lpmode_freq_threshold);
867 }
868
869 if (poll_intvl) {
870 cust_cfgs->mask |=
871 EMIF_CUSTOM_CONFIG_TEMP_ALERT_POLL_INTERVAL;
872 cust_cfgs->temp_alert_poll_interval_ms =
873 be32_to_cpup(poll_intvl);
874 }
875
876 if (of_find_property(np_emif, "extended-temp-part", &len))
877 cust_cfgs->mask |= EMIF_CUSTOM_CONFIG_EXTENDED_TEMP_PART;
878
879 if (!is_custom_config_valid(cust_cfgs, emif->dev)) {
880 devm_kfree(emif->dev, cust_cfgs);
881 return;
882 }
883
884 emif->plat_data->custom_configs = cust_cfgs;
885}
886
887static void __init_or_module of_get_ddr_info(struct device_node *np_emif,
888 struct device_node *np_ddr,
889 struct ddr_device_info *dev_info)
890{
891 u32 density = 0, io_width = 0;
892 int len;
893
894 if (of_find_property(np_emif, "cs1-used", &len))
895 dev_info->cs1_used = true;
896
897 if (of_find_property(np_emif, "cal-resistor-per-cs", &len))
898 dev_info->cal_resistors_per_cs = true;
899
900 if (of_device_is_compatible(np_ddr, "jedec,lpddr2-s4"))
901 dev_info->type = DDR_TYPE_LPDDR2_S4;
902 else if (of_device_is_compatible(np_ddr, "jedec,lpddr2-s2"))
903 dev_info->type = DDR_TYPE_LPDDR2_S2;
904
905 of_property_read_u32(np_ddr, "density", &density);
906 of_property_read_u32(np_ddr, "io-width", &io_width);
907
908 /* Convert from density in Mb to the density encoding in jedc_ddr.h */
909 if (density & (density - 1))
910 dev_info->density = 0;
911 else
912 dev_info->density = __fls(density) - 5;
913
914 /* Convert from io_width in bits to io_width encoding in jedc_ddr.h */
915 if (io_width & (io_width - 1))
916 dev_info->io_width = 0;
917 else
918 dev_info->io_width = __fls(io_width) - 1;
919}
920
921static struct emif_data * __init_or_module of_get_memory_device_details(
922 struct device_node *np_emif, struct device *dev)
923{
924 struct emif_data *emif = NULL;
925 struct ddr_device_info *dev_info = NULL;
926 struct emif_platform_data *pd = NULL;
927 struct device_node *np_ddr;
928 int len;
929
930 np_ddr = of_parse_phandle(np_emif, "device-handle", 0);
931 if (!np_ddr)
932 goto error;
933 emif = devm_kzalloc(dev, sizeof(struct emif_data), GFP_KERNEL);
934 pd = devm_kzalloc(dev, sizeof(*pd), GFP_KERNEL);
935 dev_info = devm_kzalloc(dev, sizeof(*dev_info), GFP_KERNEL);
936
937 if (!emif || !pd || !dev_info) {
938 dev_err(dev, "%s: Out of memory!!\n",
939 __func__);
940 goto error;
941 }
942
943 emif->plat_data = pd;
944 pd->device_info = dev_info;
945 emif->dev = dev;
946 emif->np_ddr = np_ddr;
947 emif->temperature_level = SDRAM_TEMP_NOMINAL;
948
949 if (of_device_is_compatible(np_emif, "ti,emif-4d"))
950 emif->plat_data->ip_rev = EMIF_4D;
951 else if (of_device_is_compatible(np_emif, "ti,emif-4d5"))
952 emif->plat_data->ip_rev = EMIF_4D5;
953
954 of_property_read_u32(np_emif, "phy-type", &pd->phy_type);
955
956 if (of_find_property(np_emif, "hw-caps-ll-interface", &len))
957 pd->hw_caps |= EMIF_HW_CAPS_LL_INTERFACE;
958
959 of_get_ddr_info(np_emif, np_ddr, dev_info);
960 if (!is_dev_data_valid(pd->device_info->type, pd->device_info->density,
961 pd->device_info->io_width, pd->phy_type, pd->ip_rev,
962 emif->dev)) {
963 dev_err(dev, "%s: invalid device data!!\n", __func__);
964 goto error;
965 }
966 /*
967 * For EMIF instances other than EMIF1 see if the devices connected
968 * are exactly same as on EMIF1(which is typically the case). If so,
969 * mark it as a duplicate of EMIF1. This will save some memory and
970 * computation.
971 */
972 if (emif1 && emif1->np_ddr == np_ddr) {
973 emif->duplicate = true;
974 goto out;
975 } else if (emif1) {
976 dev_warn(emif->dev, "%s: Non-symmetric DDR geometry\n",
977 __func__);
978 }
979
980 of_get_custom_configs(np_emif, emif);
981 emif->plat_data->timings = of_get_ddr_timings(np_ddr, emif->dev,
982 emif->plat_data->device_info->type,
983 &emif->plat_data->timings_arr_size);
984
985 emif->plat_data->min_tck = of_get_min_tck(np_ddr, emif->dev);
986 goto out;
987
988error:
989 return NULL;
990out:
991 return emif;
992}
993
994#else
995
996static struct emif_data * __init_or_module of_get_memory_device_details(
997 struct device_node *np_emif, struct device *dev)
998{
999 return NULL;
1000}
1001#endif
1002
1003static struct emif_data *__init_or_module get_device_details(
1004 struct platform_device *pdev)
1005{
1006 u32 size;
1007 struct emif_data *emif = NULL;
1008 struct ddr_device_info *dev_info;
1009 struct emif_custom_configs *cust_cfgs;
1010 struct emif_platform_data *pd;
1011 struct device *dev;
1012 void *temp;
1013
1014 pd = pdev->dev.platform_data;
1015 dev = &pdev->dev;
1016
1017 if (!(pd && pd->device_info && is_dev_data_valid(pd->device_info->type,
1018 pd->device_info->density, pd->device_info->io_width,
1019 pd->phy_type, pd->ip_rev, dev))) {
1020 dev_err(dev, "%s: invalid device data\n", __func__);
1021 goto error;
1022 }
1023
1024 emif = devm_kzalloc(dev, sizeof(*emif), GFP_KERNEL);
1025 temp = devm_kzalloc(dev, sizeof(*pd), GFP_KERNEL);
1026 dev_info = devm_kzalloc(dev, sizeof(*dev_info), GFP_KERNEL);
1027
1028 if (!emif || !temp || !dev_info)
1029 goto error;
1030
1031 memcpy(temp, pd, sizeof(*pd));
1032 pd = temp;
1033 memcpy(dev_info, pd->device_info, sizeof(*dev_info));
1034
1035 pd->device_info = dev_info;
1036 emif->plat_data = pd;
1037 emif->dev = dev;
1038 emif->temperature_level = SDRAM_TEMP_NOMINAL;
1039
1040 /*
1041 * For EMIF instances other than EMIF1 see if the devices connected
1042 * are exactly same as on EMIF1(which is typically the case). If so,
1043 * mark it as a duplicate of EMIF1 and skip copying timings data.
1044 * This will save some memory and some computation later.
1045 */
1046 emif->duplicate = emif1 && (memcmp(dev_info,
1047 emif1->plat_data->device_info,
1048 sizeof(struct ddr_device_info)) == 0);
1049
1050 if (emif->duplicate) {
1051 pd->timings = NULL;
1052 pd->min_tck = NULL;
1053 goto out;
1054 } else if (emif1) {
1055 dev_warn(emif->dev, "%s: Non-symmetric DDR geometry\n",
1056 __func__);
1057 }
1058
1059 /*
1060 * Copy custom configs - ignore allocation error, if any, as
1061 * custom_configs is not very critical
1062 */
1063 cust_cfgs = pd->custom_configs;
1064 if (cust_cfgs && is_custom_config_valid(cust_cfgs, dev)) {
1065 temp = devm_kzalloc(dev, sizeof(*cust_cfgs), GFP_KERNEL);
1066 if (temp)
1067 memcpy(temp, cust_cfgs, sizeof(*cust_cfgs));
1068 pd->custom_configs = temp;
1069 }
1070
1071 /*
1072 * Copy timings and min-tck values from platform data. If it is not
1073 * available or if memory allocation fails, use JEDEC defaults
1074 */
1075 size = sizeof(struct lpddr2_timings) * pd->timings_arr_size;
1076 if (pd->timings) {
1077 temp = devm_kzalloc(dev, size, GFP_KERNEL);
1078 if (temp) {
1079 memcpy(temp, pd->timings, size);
1080 pd->timings = temp;
1081 } else {
1082 get_default_timings(emif);
1083 }
1084 } else {
1085 get_default_timings(emif);
1086 }
1087
1088 if (pd->min_tck) {
1089 temp = devm_kzalloc(dev, sizeof(*pd->min_tck), GFP_KERNEL);
1090 if (temp) {
1091 memcpy(temp, pd->min_tck, sizeof(*pd->min_tck));
1092 pd->min_tck = temp;
1093 } else {
1094 pd->min_tck = &lpddr2_jedec_min_tck;
1095 }
1096 } else {
1097 pd->min_tck = &lpddr2_jedec_min_tck;
1098 }
1099
1100out:
1101 return emif;
1102
1103error:
1104 return NULL;
1105}
1106
1107static int __init_or_module emif_probe(struct platform_device *pdev)
1108{
1109 struct emif_data *emif;
1110 int irq, ret;
1111
1112 if (pdev->dev.of_node)
1113 emif = of_get_memory_device_details(pdev->dev.of_node, &pdev->dev);
1114 else
1115 emif = get_device_details(pdev);
1116
1117 if (!emif) {
1118 pr_err("%s: error getting device data\n", __func__);
1119 goto error;
1120 }
1121
1122 list_add(&emif->node, &device_list);
1123
1124 /* Save pointers to each other in emif and device structures */
1125 emif->dev = &pdev->dev;
1126 platform_set_drvdata(pdev, emif);
1127
1128 emif->base = devm_platform_ioremap_resource(pdev, 0);
1129 if (IS_ERR(emif->base))
1130 goto error;
1131
1132 irq = platform_get_irq(pdev, 0);
1133 if (irq < 0)
1134 goto error;
1135
1136 emif_onetime_settings(emif);
1137 emif_debugfs_init(emif);
1138 disable_and_clear_all_interrupts(emif);
1139 ret = setup_interrupts(emif, irq);
1140 if (ret)
1141 goto error;
1142
1143 /* One-time actions taken on probing the first device */
1144 if (!emif1) {
1145 emif1 = emif;
1146
1147 /*
1148 * TODO: register notifiers for frequency and voltage
1149 * change here once the respective frameworks are
1150 * available
1151 */
1152 }
1153
1154 dev_info(&pdev->dev, "%s: device configured with addr = %p and IRQ%d\n",
1155 __func__, emif->base, irq);
1156
1157 return 0;
1158error:
1159 return -ENODEV;
1160}
1161
1162static void __exit emif_remove(struct platform_device *pdev)
1163{
1164 struct emif_data *emif = platform_get_drvdata(pdev);
1165
1166 emif_debugfs_exit(emif);
1167}
1168
1169static void emif_shutdown(struct platform_device *pdev)
1170{
1171 struct emif_data *emif = platform_get_drvdata(pdev);
1172
1173 disable_and_clear_all_interrupts(emif);
1174}
1175
1176#if defined(CONFIG_OF)
1177static const struct of_device_id emif_of_match[] = {
1178 { .compatible = "ti,emif-4d" },
1179 { .compatible = "ti,emif-4d5" },
1180 {},
1181};
1182MODULE_DEVICE_TABLE(of, emif_of_match);
1183#endif
1184
1185static struct platform_driver emif_driver = {
1186 .remove_new = __exit_p(emif_remove),
1187 .shutdown = emif_shutdown,
1188 .driver = {
1189 .name = "emif",
1190 .of_match_table = of_match_ptr(emif_of_match),
1191 },
1192};
1193
1194module_platform_driver_probe(emif_driver, emif_probe);
1195
1196MODULE_DESCRIPTION("TI EMIF SDRAM Controller Driver");
1197MODULE_LICENSE("GPL");
1198MODULE_ALIAS("platform:emif");
1199MODULE_AUTHOR("Texas Instruments Inc");
1/*
2 * EMIF driver
3 *
4 * Copyright (C) 2012 Texas Instruments, Inc.
5 *
6 * Aneesh V <aneesh@ti.com>
7 * Santosh Shilimkar <santosh.shilimkar@ti.com>
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
12 */
13#include <linux/err.h>
14#include <linux/kernel.h>
15#include <linux/reboot.h>
16#include <linux/platform_data/emif_plat.h>
17#include <linux/io.h>
18#include <linux/device.h>
19#include <linux/platform_device.h>
20#include <linux/interrupt.h>
21#include <linux/slab.h>
22#include <linux/of.h>
23#include <linux/debugfs.h>
24#include <linux/seq_file.h>
25#include <linux/module.h>
26#include <linux/list.h>
27#include <linux/spinlock.h>
28#include <linux/pm.h>
29#include <memory/jedec_ddr.h>
30#include "emif.h"
31#include "of_memory.h"
32
33/**
34 * struct emif_data - Per device static data for driver's use
35 * @duplicate: Whether the DDR devices attached to this EMIF
36 * instance are exactly same as that on EMIF1. In
37 * this case we can save some memory and processing
38 * @temperature_level: Maximum temperature of LPDDR2 devices attached
39 * to this EMIF - read from MR4 register. If there
40 * are two devices attached to this EMIF, this
41 * value is the maximum of the two temperature
42 * levels.
43 * @node: node in the device list
44 * @base: base address of memory-mapped IO registers.
45 * @dev: device pointer.
46 * @addressing table with addressing information from the spec
47 * @regs_cache: An array of 'struct emif_regs' that stores
48 * calculated register values for different
49 * frequencies, to avoid re-calculating them on
50 * each DVFS transition.
51 * @curr_regs: The set of register values used in the last
52 * frequency change (i.e. corresponding to the
53 * frequency in effect at the moment)
54 * @plat_data: Pointer to saved platform data.
55 * @debugfs_root: dentry to the root folder for EMIF in debugfs
56 * @np_ddr: Pointer to ddr device tree node
57 */
58struct emif_data {
59 u8 duplicate;
60 u8 temperature_level;
61 u8 lpmode;
62 struct list_head node;
63 unsigned long irq_state;
64 void __iomem *base;
65 struct device *dev;
66 const struct lpddr2_addressing *addressing;
67 struct emif_regs *regs_cache[EMIF_MAX_NUM_FREQUENCIES];
68 struct emif_regs *curr_regs;
69 struct emif_platform_data *plat_data;
70 struct dentry *debugfs_root;
71 struct device_node *np_ddr;
72};
73
74static struct emif_data *emif1;
75static spinlock_t emif_lock;
76static unsigned long irq_state;
77static u32 t_ck; /* DDR clock period in ps */
78static LIST_HEAD(device_list);
79
80#ifdef CONFIG_DEBUG_FS
81static void do_emif_regdump_show(struct seq_file *s, struct emif_data *emif,
82 struct emif_regs *regs)
83{
84 u32 type = emif->plat_data->device_info->type;
85 u32 ip_rev = emif->plat_data->ip_rev;
86
87 seq_printf(s, "EMIF register cache dump for %dMHz\n",
88 regs->freq/1000000);
89
90 seq_printf(s, "ref_ctrl_shdw\t: 0x%08x\n", regs->ref_ctrl_shdw);
91 seq_printf(s, "sdram_tim1_shdw\t: 0x%08x\n", regs->sdram_tim1_shdw);
92 seq_printf(s, "sdram_tim2_shdw\t: 0x%08x\n", regs->sdram_tim2_shdw);
93 seq_printf(s, "sdram_tim3_shdw\t: 0x%08x\n", regs->sdram_tim3_shdw);
94
95 if (ip_rev == EMIF_4D) {
96 seq_printf(s, "read_idle_ctrl_shdw_normal\t: 0x%08x\n",
97 regs->read_idle_ctrl_shdw_normal);
98 seq_printf(s, "read_idle_ctrl_shdw_volt_ramp\t: 0x%08x\n",
99 regs->read_idle_ctrl_shdw_volt_ramp);
100 } else if (ip_rev == EMIF_4D5) {
101 seq_printf(s, "dll_calib_ctrl_shdw_normal\t: 0x%08x\n",
102 regs->dll_calib_ctrl_shdw_normal);
103 seq_printf(s, "dll_calib_ctrl_shdw_volt_ramp\t: 0x%08x\n",
104 regs->dll_calib_ctrl_shdw_volt_ramp);
105 }
106
107 if (type == DDR_TYPE_LPDDR2_S2 || type == DDR_TYPE_LPDDR2_S4) {
108 seq_printf(s, "ref_ctrl_shdw_derated\t: 0x%08x\n",
109 regs->ref_ctrl_shdw_derated);
110 seq_printf(s, "sdram_tim1_shdw_derated\t: 0x%08x\n",
111 regs->sdram_tim1_shdw_derated);
112 seq_printf(s, "sdram_tim3_shdw_derated\t: 0x%08x\n",
113 regs->sdram_tim3_shdw_derated);
114 }
115}
116
117static int emif_regdump_show(struct seq_file *s, void *unused)
118{
119 struct emif_data *emif = s->private;
120 struct emif_regs **regs_cache;
121 int i;
122
123 if (emif->duplicate)
124 regs_cache = emif1->regs_cache;
125 else
126 regs_cache = emif->regs_cache;
127
128 for (i = 0; i < EMIF_MAX_NUM_FREQUENCIES && regs_cache[i]; i++) {
129 do_emif_regdump_show(s, emif, regs_cache[i]);
130 seq_putc(s, '\n');
131 }
132
133 return 0;
134}
135
136static int emif_regdump_open(struct inode *inode, struct file *file)
137{
138 return single_open(file, emif_regdump_show, inode->i_private);
139}
140
141static const struct file_operations emif_regdump_fops = {
142 .open = emif_regdump_open,
143 .read = seq_read,
144 .release = single_release,
145};
146
147static int emif_mr4_show(struct seq_file *s, void *unused)
148{
149 struct emif_data *emif = s->private;
150
151 seq_printf(s, "MR4=%d\n", emif->temperature_level);
152 return 0;
153}
154
155static int emif_mr4_open(struct inode *inode, struct file *file)
156{
157 return single_open(file, emif_mr4_show, inode->i_private);
158}
159
160static const struct file_operations emif_mr4_fops = {
161 .open = emif_mr4_open,
162 .read = seq_read,
163 .release = single_release,
164};
165
166static int __init_or_module emif_debugfs_init(struct emif_data *emif)
167{
168 struct dentry *dentry;
169 int ret;
170
171 dentry = debugfs_create_dir(dev_name(emif->dev), NULL);
172 if (!dentry) {
173 ret = -ENOMEM;
174 goto err0;
175 }
176 emif->debugfs_root = dentry;
177
178 dentry = debugfs_create_file("regcache_dump", S_IRUGO,
179 emif->debugfs_root, emif, &emif_regdump_fops);
180 if (!dentry) {
181 ret = -ENOMEM;
182 goto err1;
183 }
184
185 dentry = debugfs_create_file("mr4", S_IRUGO,
186 emif->debugfs_root, emif, &emif_mr4_fops);
187 if (!dentry) {
188 ret = -ENOMEM;
189 goto err1;
190 }
191
192 return 0;
193err1:
194 debugfs_remove_recursive(emif->debugfs_root);
195err0:
196 return ret;
197}
198
199static void __exit emif_debugfs_exit(struct emif_data *emif)
200{
201 debugfs_remove_recursive(emif->debugfs_root);
202 emif->debugfs_root = NULL;
203}
204#else
205static inline int __init_or_module emif_debugfs_init(struct emif_data *emif)
206{
207 return 0;
208}
209
210static inline void __exit emif_debugfs_exit(struct emif_data *emif)
211{
212}
213#endif
214
215/*
216 * Calculate the period of DDR clock from frequency value
217 */
218static void set_ddr_clk_period(u32 freq)
219{
220 /* Divide 10^12 by frequency to get period in ps */
221 t_ck = (u32)DIV_ROUND_UP_ULL(1000000000000ull, freq);
222}
223
224/*
225 * Get bus width used by EMIF. Note that this may be different from the
226 * bus width of the DDR devices used. For instance two 16-bit DDR devices
227 * may be connected to a given CS of EMIF. In this case bus width as far
228 * as EMIF is concerned is 32, where as the DDR bus width is 16 bits.
229 */
230static u32 get_emif_bus_width(struct emif_data *emif)
231{
232 u32 width;
233 void __iomem *base = emif->base;
234
235 width = (readl(base + EMIF_SDRAM_CONFIG) & NARROW_MODE_MASK)
236 >> NARROW_MODE_SHIFT;
237 width = width == 0 ? 32 : 16;
238
239 return width;
240}
241
242/*
243 * Get the CL from SDRAM_CONFIG register
244 */
245static u32 get_cl(struct emif_data *emif)
246{
247 u32 cl;
248 void __iomem *base = emif->base;
249
250 cl = (readl(base + EMIF_SDRAM_CONFIG) & CL_MASK) >> CL_SHIFT;
251
252 return cl;
253}
254
255static void set_lpmode(struct emif_data *emif, u8 lpmode)
256{
257 u32 temp;
258 void __iomem *base = emif->base;
259
260 /*
261 * Workaround for errata i743 - LPDDR2 Power-Down State is Not
262 * Efficient
263 *
264 * i743 DESCRIPTION:
265 * The EMIF supports power-down state for low power. The EMIF
266 * automatically puts the SDRAM into power-down after the memory is
267 * not accessed for a defined number of cycles and the
268 * EMIF_PWR_MGMT_CTRL[10:8] REG_LP_MODE bit field is set to 0x4.
269 * As the EMIF supports automatic output impedance calibration, a ZQ
270 * calibration long command is issued every time it exits active
271 * power-down and precharge power-down modes. The EMIF waits and
272 * blocks any other command during this calibration.
273 * The EMIF does not allow selective disabling of ZQ calibration upon
274 * exit of power-down mode. Due to very short periods of power-down
275 * cycles, ZQ calibration overhead creates bandwidth issues and
276 * increases overall system power consumption. On the other hand,
277 * issuing ZQ calibration long commands when exiting self-refresh is
278 * still required.
279 *
280 * WORKAROUND
281 * Because there is no power consumption benefit of the power-down due
282 * to the calibration and there is a performance risk, the guideline
283 * is to not allow power-down state and, therefore, to not have set
284 * the EMIF_PWR_MGMT_CTRL[10:8] REG_LP_MODE bit field to 0x4.
285 */
286 if ((emif->plat_data->ip_rev == EMIF_4D) &&
287 (EMIF_LP_MODE_PWR_DN == lpmode)) {
288 WARN_ONCE(1,
289 "REG_LP_MODE = LP_MODE_PWR_DN(4) is prohibited by"
290 "erratum i743 switch to LP_MODE_SELF_REFRESH(2)\n");
291 /* rollback LP_MODE to Self-refresh mode */
292 lpmode = EMIF_LP_MODE_SELF_REFRESH;
293 }
294
295 temp = readl(base + EMIF_POWER_MANAGEMENT_CONTROL);
296 temp &= ~LP_MODE_MASK;
297 temp |= (lpmode << LP_MODE_SHIFT);
298 writel(temp, base + EMIF_POWER_MANAGEMENT_CONTROL);
299}
300
301static void do_freq_update(void)
302{
303 struct emif_data *emif;
304
305 /*
306 * Workaround for errata i728: Disable LPMODE during FREQ_UPDATE
307 *
308 * i728 DESCRIPTION:
309 * The EMIF automatically puts the SDRAM into self-refresh mode
310 * after the EMIF has not performed accesses during
311 * EMIF_PWR_MGMT_CTRL[7:4] REG_SR_TIM number of DDR clock cycles
312 * and the EMIF_PWR_MGMT_CTRL[10:8] REG_LP_MODE bit field is set
313 * to 0x2. If during a small window the following three events
314 * occur:
315 * - The SR_TIMING counter expires
316 * - And frequency change is requested
317 * - And OCP access is requested
318 * Then it causes instable clock on the DDR interface.
319 *
320 * WORKAROUND
321 * To avoid the occurrence of the three events, the workaround
322 * is to disable the self-refresh when requesting a frequency
323 * change. Before requesting a frequency change the software must
324 * program EMIF_PWR_MGMT_CTRL[10:8] REG_LP_MODE to 0x0. When the
325 * frequency change has been done, the software can reprogram
326 * EMIF_PWR_MGMT_CTRL[10:8] REG_LP_MODE to 0x2
327 */
328 list_for_each_entry(emif, &device_list, node) {
329 if (emif->lpmode == EMIF_LP_MODE_SELF_REFRESH)
330 set_lpmode(emif, EMIF_LP_MODE_DISABLE);
331 }
332
333 /*
334 * TODO: Do FREQ_UPDATE here when an API
335 * is available for this as part of the new
336 * clock framework
337 */
338
339 list_for_each_entry(emif, &device_list, node) {
340 if (emif->lpmode == EMIF_LP_MODE_SELF_REFRESH)
341 set_lpmode(emif, EMIF_LP_MODE_SELF_REFRESH);
342 }
343}
344
345/* Find addressing table entry based on the device's type and density */
346static const struct lpddr2_addressing *get_addressing_table(
347 const struct ddr_device_info *device_info)
348{
349 u32 index, type, density;
350
351 type = device_info->type;
352 density = device_info->density;
353
354 switch (type) {
355 case DDR_TYPE_LPDDR2_S4:
356 index = density - 1;
357 break;
358 case DDR_TYPE_LPDDR2_S2:
359 switch (density) {
360 case DDR_DENSITY_1Gb:
361 case DDR_DENSITY_2Gb:
362 index = density + 3;
363 break;
364 default:
365 index = density - 1;
366 }
367 break;
368 default:
369 return NULL;
370 }
371
372 return &lpddr2_jedec_addressing_table[index];
373}
374
375/*
376 * Find the the right timing table from the array of timing
377 * tables of the device using DDR clock frequency
378 */
379static const struct lpddr2_timings *get_timings_table(struct emif_data *emif,
380 u32 freq)
381{
382 u32 i, min, max, freq_nearest;
383 const struct lpddr2_timings *timings = NULL;
384 const struct lpddr2_timings *timings_arr = emif->plat_data->timings;
385 struct device *dev = emif->dev;
386
387 /* Start with a very high frequency - 1GHz */
388 freq_nearest = 1000000000;
389
390 /*
391 * Find the timings table such that:
392 * 1. the frequency range covers the required frequency(safe) AND
393 * 2. the max_freq is closest to the required frequency(optimal)
394 */
395 for (i = 0; i < emif->plat_data->timings_arr_size; i++) {
396 max = timings_arr[i].max_freq;
397 min = timings_arr[i].min_freq;
398 if ((freq >= min) && (freq <= max) && (max < freq_nearest)) {
399 freq_nearest = max;
400 timings = &timings_arr[i];
401 }
402 }
403
404 if (!timings)
405 dev_err(dev, "%s: couldn't find timings for - %dHz\n",
406 __func__, freq);
407
408 dev_dbg(dev, "%s: timings table: freq %d, speed bin freq %d\n",
409 __func__, freq, freq_nearest);
410
411 return timings;
412}
413
414static u32 get_sdram_ref_ctrl_shdw(u32 freq,
415 const struct lpddr2_addressing *addressing)
416{
417 u32 ref_ctrl_shdw = 0, val = 0, freq_khz, t_refi;
418
419 /* Scale down frequency and t_refi to avoid overflow */
420 freq_khz = freq / 1000;
421 t_refi = addressing->tREFI_ns / 100;
422
423 /*
424 * refresh rate to be set is 'tREFI(in us) * freq in MHz
425 * division by 10000 to account for change in units
426 */
427 val = t_refi * freq_khz / 10000;
428 ref_ctrl_shdw |= val << REFRESH_RATE_SHIFT;
429
430 return ref_ctrl_shdw;
431}
432
433static u32 get_sdram_tim_1_shdw(const struct lpddr2_timings *timings,
434 const struct lpddr2_min_tck *min_tck,
435 const struct lpddr2_addressing *addressing)
436{
437 u32 tim1 = 0, val = 0;
438
439 val = max(min_tck->tWTR, DIV_ROUND_UP(timings->tWTR, t_ck)) - 1;
440 tim1 |= val << T_WTR_SHIFT;
441
442 if (addressing->num_banks == B8)
443 val = DIV_ROUND_UP(timings->tFAW, t_ck*4);
444 else
445 val = max(min_tck->tRRD, DIV_ROUND_UP(timings->tRRD, t_ck));
446 tim1 |= (val - 1) << T_RRD_SHIFT;
447
448 val = DIV_ROUND_UP(timings->tRAS_min + timings->tRPab, t_ck) - 1;
449 tim1 |= val << T_RC_SHIFT;
450
451 val = max(min_tck->tRASmin, DIV_ROUND_UP(timings->tRAS_min, t_ck));
452 tim1 |= (val - 1) << T_RAS_SHIFT;
453
454 val = max(min_tck->tWR, DIV_ROUND_UP(timings->tWR, t_ck)) - 1;
455 tim1 |= val << T_WR_SHIFT;
456
457 val = max(min_tck->tRCD, DIV_ROUND_UP(timings->tRCD, t_ck)) - 1;
458 tim1 |= val << T_RCD_SHIFT;
459
460 val = max(min_tck->tRPab, DIV_ROUND_UP(timings->tRPab, t_ck)) - 1;
461 tim1 |= val << T_RP_SHIFT;
462
463 return tim1;
464}
465
466static u32 get_sdram_tim_1_shdw_derated(const struct lpddr2_timings *timings,
467 const struct lpddr2_min_tck *min_tck,
468 const struct lpddr2_addressing *addressing)
469{
470 u32 tim1 = 0, val = 0;
471
472 val = max(min_tck->tWTR, DIV_ROUND_UP(timings->tWTR, t_ck)) - 1;
473 tim1 = val << T_WTR_SHIFT;
474
475 /*
476 * tFAW is approximately 4 times tRRD. So add 1875*4 = 7500ps
477 * to tFAW for de-rating
478 */
479 if (addressing->num_banks == B8) {
480 val = DIV_ROUND_UP(timings->tFAW + 7500, 4 * t_ck) - 1;
481 } else {
482 val = DIV_ROUND_UP(timings->tRRD + 1875, t_ck);
483 val = max(min_tck->tRRD, val) - 1;
484 }
485 tim1 |= val << T_RRD_SHIFT;
486
487 val = DIV_ROUND_UP(timings->tRAS_min + timings->tRPab + 1875, t_ck);
488 tim1 |= (val - 1) << T_RC_SHIFT;
489
490 val = DIV_ROUND_UP(timings->tRAS_min + 1875, t_ck);
491 val = max(min_tck->tRASmin, val) - 1;
492 tim1 |= val << T_RAS_SHIFT;
493
494 val = max(min_tck->tWR, DIV_ROUND_UP(timings->tWR, t_ck)) - 1;
495 tim1 |= val << T_WR_SHIFT;
496
497 val = max(min_tck->tRCD, DIV_ROUND_UP(timings->tRCD + 1875, t_ck));
498 tim1 |= (val - 1) << T_RCD_SHIFT;
499
500 val = max(min_tck->tRPab, DIV_ROUND_UP(timings->tRPab + 1875, t_ck));
501 tim1 |= (val - 1) << T_RP_SHIFT;
502
503 return tim1;
504}
505
506static u32 get_sdram_tim_2_shdw(const struct lpddr2_timings *timings,
507 const struct lpddr2_min_tck *min_tck,
508 const struct lpddr2_addressing *addressing,
509 u32 type)
510{
511 u32 tim2 = 0, val = 0;
512
513 val = min_tck->tCKE - 1;
514 tim2 |= val << T_CKE_SHIFT;
515
516 val = max(min_tck->tRTP, DIV_ROUND_UP(timings->tRTP, t_ck)) - 1;
517 tim2 |= val << T_RTP_SHIFT;
518
519 /* tXSNR = tRFCab_ps + 10 ns(tRFCab_ps for LPDDR2). */
520 val = DIV_ROUND_UP(addressing->tRFCab_ps + 10000, t_ck) - 1;
521 tim2 |= val << T_XSNR_SHIFT;
522
523 /* XSRD same as XSNR for LPDDR2 */
524 tim2 |= val << T_XSRD_SHIFT;
525
526 val = max(min_tck->tXP, DIV_ROUND_UP(timings->tXP, t_ck)) - 1;
527 tim2 |= val << T_XP_SHIFT;
528
529 return tim2;
530}
531
532static u32 get_sdram_tim_3_shdw(const struct lpddr2_timings *timings,
533 const struct lpddr2_min_tck *min_tck,
534 const struct lpddr2_addressing *addressing,
535 u32 type, u32 ip_rev, u32 derated)
536{
537 u32 tim3 = 0, val = 0, t_dqsck;
538
539 val = timings->tRAS_max_ns / addressing->tREFI_ns - 1;
540 val = val > 0xF ? 0xF : val;
541 tim3 |= val << T_RAS_MAX_SHIFT;
542
543 val = DIV_ROUND_UP(addressing->tRFCab_ps, t_ck) - 1;
544 tim3 |= val << T_RFC_SHIFT;
545
546 t_dqsck = (derated == EMIF_DERATED_TIMINGS) ?
547 timings->tDQSCK_max_derated : timings->tDQSCK_max;
548 if (ip_rev == EMIF_4D5)
549 val = DIV_ROUND_UP(t_dqsck + 1000, t_ck) - 1;
550 else
551 val = DIV_ROUND_UP(t_dqsck, t_ck) - 1;
552
553 tim3 |= val << T_TDQSCKMAX_SHIFT;
554
555 val = DIV_ROUND_UP(timings->tZQCS, t_ck) - 1;
556 tim3 |= val << ZQ_ZQCS_SHIFT;
557
558 val = DIV_ROUND_UP(timings->tCKESR, t_ck);
559 val = max(min_tck->tCKESR, val) - 1;
560 tim3 |= val << T_CKESR_SHIFT;
561
562 if (ip_rev == EMIF_4D5) {
563 tim3 |= (EMIF_T_CSTA - 1) << T_CSTA_SHIFT;
564
565 val = DIV_ROUND_UP(EMIF_T_PDLL_UL, 128) - 1;
566 tim3 |= val << T_PDLL_UL_SHIFT;
567 }
568
569 return tim3;
570}
571
572static u32 get_zq_config_reg(const struct lpddr2_addressing *addressing,
573 bool cs1_used, bool cal_resistors_per_cs)
574{
575 u32 zq = 0, val = 0;
576
577 val = EMIF_ZQCS_INTERVAL_US * 1000 / addressing->tREFI_ns;
578 zq |= val << ZQ_REFINTERVAL_SHIFT;
579
580 val = DIV_ROUND_UP(T_ZQCL_DEFAULT_NS, T_ZQCS_DEFAULT_NS) - 1;
581 zq |= val << ZQ_ZQCL_MULT_SHIFT;
582
583 val = DIV_ROUND_UP(T_ZQINIT_DEFAULT_NS, T_ZQCL_DEFAULT_NS) - 1;
584 zq |= val << ZQ_ZQINIT_MULT_SHIFT;
585
586 zq |= ZQ_SFEXITEN_ENABLE << ZQ_SFEXITEN_SHIFT;
587
588 if (cal_resistors_per_cs)
589 zq |= ZQ_DUALCALEN_ENABLE << ZQ_DUALCALEN_SHIFT;
590 else
591 zq |= ZQ_DUALCALEN_DISABLE << ZQ_DUALCALEN_SHIFT;
592
593 zq |= ZQ_CS0EN_MASK; /* CS0 is used for sure */
594
595 val = cs1_used ? 1 : 0;
596 zq |= val << ZQ_CS1EN_SHIFT;
597
598 return zq;
599}
600
601static u32 get_temp_alert_config(const struct lpddr2_addressing *addressing,
602 const struct emif_custom_configs *custom_configs, bool cs1_used,
603 u32 sdram_io_width, u32 emif_bus_width)
604{
605 u32 alert = 0, interval, devcnt;
606
607 if (custom_configs && (custom_configs->mask &
608 EMIF_CUSTOM_CONFIG_TEMP_ALERT_POLL_INTERVAL))
609 interval = custom_configs->temp_alert_poll_interval_ms;
610 else
611 interval = TEMP_ALERT_POLL_INTERVAL_DEFAULT_MS;
612
613 interval *= 1000000; /* Convert to ns */
614 interval /= addressing->tREFI_ns; /* Convert to refresh cycles */
615 alert |= (interval << TA_REFINTERVAL_SHIFT);
616
617 /*
618 * sdram_io_width is in 'log2(x) - 1' form. Convert emif_bus_width
619 * also to this form and subtract to get TA_DEVCNT, which is
620 * in log2(x) form.
621 */
622 emif_bus_width = __fls(emif_bus_width) - 1;
623 devcnt = emif_bus_width - sdram_io_width;
624 alert |= devcnt << TA_DEVCNT_SHIFT;
625
626 /* DEVWDT is in 'log2(x) - 3' form */
627 alert |= (sdram_io_width - 2) << TA_DEVWDT_SHIFT;
628
629 alert |= 1 << TA_SFEXITEN_SHIFT;
630 alert |= 1 << TA_CS0EN_SHIFT;
631 alert |= (cs1_used ? 1 : 0) << TA_CS1EN_SHIFT;
632
633 return alert;
634}
635
636static u32 get_read_idle_ctrl_shdw(u8 volt_ramp)
637{
638 u32 idle = 0, val = 0;
639
640 /*
641 * Maximum value in normal conditions and increased frequency
642 * when voltage is ramping
643 */
644 if (volt_ramp)
645 val = READ_IDLE_INTERVAL_DVFS / t_ck / 64 - 1;
646 else
647 val = 0x1FF;
648
649 /*
650 * READ_IDLE_CTRL register in EMIF4D has same offset and fields
651 * as DLL_CALIB_CTRL in EMIF4D5, so use the same shifts
652 */
653 idle |= val << DLL_CALIB_INTERVAL_SHIFT;
654 idle |= EMIF_READ_IDLE_LEN_VAL << ACK_WAIT_SHIFT;
655
656 return idle;
657}
658
659static u32 get_dll_calib_ctrl_shdw(u8 volt_ramp)
660{
661 u32 calib = 0, val = 0;
662
663 if (volt_ramp == DDR_VOLTAGE_RAMPING)
664 val = DLL_CALIB_INTERVAL_DVFS / t_ck / 16 - 1;
665 else
666 val = 0; /* Disabled when voltage is stable */
667
668 calib |= val << DLL_CALIB_INTERVAL_SHIFT;
669 calib |= DLL_CALIB_ACK_WAIT_VAL << ACK_WAIT_SHIFT;
670
671 return calib;
672}
673
674static u32 get_ddr_phy_ctrl_1_attilaphy_4d(const struct lpddr2_timings *timings,
675 u32 freq, u8 RL)
676{
677 u32 phy = EMIF_DDR_PHY_CTRL_1_BASE_VAL_ATTILAPHY, val = 0;
678
679 val = RL + DIV_ROUND_UP(timings->tDQSCK_max, t_ck) - 1;
680 phy |= val << READ_LATENCY_SHIFT_4D;
681
682 if (freq <= 100000000)
683 val = EMIF_DLL_SLAVE_DLY_CTRL_100_MHZ_AND_LESS_ATTILAPHY;
684 else if (freq <= 200000000)
685 val = EMIF_DLL_SLAVE_DLY_CTRL_200_MHZ_ATTILAPHY;
686 else
687 val = EMIF_DLL_SLAVE_DLY_CTRL_400_MHZ_ATTILAPHY;
688
689 phy |= val << DLL_SLAVE_DLY_CTRL_SHIFT_4D;
690
691 return phy;
692}
693
694static u32 get_phy_ctrl_1_intelliphy_4d5(u32 freq, u8 cl)
695{
696 u32 phy = EMIF_DDR_PHY_CTRL_1_BASE_VAL_INTELLIPHY, half_delay;
697
698 /*
699 * DLL operates at 266 MHz. If DDR frequency is near 266 MHz,
700 * half-delay is not needed else set half-delay
701 */
702 if (freq >= 265000000 && freq < 267000000)
703 half_delay = 0;
704 else
705 half_delay = 1;
706
707 phy |= half_delay << DLL_HALF_DELAY_SHIFT_4D5;
708 phy |= ((cl + DIV_ROUND_UP(EMIF_PHY_TOTAL_READ_LATENCY_INTELLIPHY_PS,
709 t_ck) - 1) << READ_LATENCY_SHIFT_4D5);
710
711 return phy;
712}
713
714static u32 get_ext_phy_ctrl_2_intelliphy_4d5(void)
715{
716 u32 fifo_we_slave_ratio;
717
718 fifo_we_slave_ratio = DIV_ROUND_CLOSEST(
719 EMIF_INTELLI_PHY_DQS_GATE_OPENING_DELAY_PS * 256 , t_ck);
720
721 return fifo_we_slave_ratio | fifo_we_slave_ratio << 11 |
722 fifo_we_slave_ratio << 22;
723}
724
725static u32 get_ext_phy_ctrl_3_intelliphy_4d5(void)
726{
727 u32 fifo_we_slave_ratio;
728
729 fifo_we_slave_ratio = DIV_ROUND_CLOSEST(
730 EMIF_INTELLI_PHY_DQS_GATE_OPENING_DELAY_PS * 256 , t_ck);
731
732 return fifo_we_slave_ratio >> 10 | fifo_we_slave_ratio << 1 |
733 fifo_we_slave_ratio << 12 | fifo_we_slave_ratio << 23;
734}
735
736static u32 get_ext_phy_ctrl_4_intelliphy_4d5(void)
737{
738 u32 fifo_we_slave_ratio;
739
740 fifo_we_slave_ratio = DIV_ROUND_CLOSEST(
741 EMIF_INTELLI_PHY_DQS_GATE_OPENING_DELAY_PS * 256 , t_ck);
742
743 return fifo_we_slave_ratio >> 9 | fifo_we_slave_ratio << 2 |
744 fifo_we_slave_ratio << 13;
745}
746
747static u32 get_pwr_mgmt_ctrl(u32 freq, struct emif_data *emif, u32 ip_rev)
748{
749 u32 pwr_mgmt_ctrl = 0, timeout;
750 u32 lpmode = EMIF_LP_MODE_SELF_REFRESH;
751 u32 timeout_perf = EMIF_LP_MODE_TIMEOUT_PERFORMANCE;
752 u32 timeout_pwr = EMIF_LP_MODE_TIMEOUT_POWER;
753 u32 freq_threshold = EMIF_LP_MODE_FREQ_THRESHOLD;
754 u32 mask;
755 u8 shift;
756
757 struct emif_custom_configs *cust_cfgs = emif->plat_data->custom_configs;
758
759 if (cust_cfgs && (cust_cfgs->mask & EMIF_CUSTOM_CONFIG_LPMODE)) {
760 lpmode = cust_cfgs->lpmode;
761 timeout_perf = cust_cfgs->lpmode_timeout_performance;
762 timeout_pwr = cust_cfgs->lpmode_timeout_power;
763 freq_threshold = cust_cfgs->lpmode_freq_threshold;
764 }
765
766 /* Timeout based on DDR frequency */
767 timeout = freq >= freq_threshold ? timeout_perf : timeout_pwr;
768
769 /*
770 * The value to be set in register is "log2(timeout) - 3"
771 * if timeout < 16 load 0 in register
772 * if timeout is not a power of 2, round to next highest power of 2
773 */
774 if (timeout < 16) {
775 timeout = 0;
776 } else {
777 if (timeout & (timeout - 1))
778 timeout <<= 1;
779 timeout = __fls(timeout) - 3;
780 }
781
782 switch (lpmode) {
783 case EMIF_LP_MODE_CLOCK_STOP:
784 shift = CS_TIM_SHIFT;
785 mask = CS_TIM_MASK;
786 break;
787 case EMIF_LP_MODE_SELF_REFRESH:
788 /* Workaround for errata i735 */
789 if (timeout < 6)
790 timeout = 6;
791
792 shift = SR_TIM_SHIFT;
793 mask = SR_TIM_MASK;
794 break;
795 case EMIF_LP_MODE_PWR_DN:
796 shift = PD_TIM_SHIFT;
797 mask = PD_TIM_MASK;
798 break;
799 case EMIF_LP_MODE_DISABLE:
800 default:
801 mask = 0;
802 shift = 0;
803 break;
804 }
805 /* Round to maximum in case of overflow, BUT warn! */
806 if (lpmode != EMIF_LP_MODE_DISABLE && timeout > mask >> shift) {
807 pr_err("TIMEOUT Overflow - lpmode=%d perf=%d pwr=%d freq=%d\n",
808 lpmode,
809 timeout_perf,
810 timeout_pwr,
811 freq_threshold);
812 WARN(1, "timeout=0x%02x greater than 0x%02x. Using max\n",
813 timeout, mask >> shift);
814 timeout = mask >> shift;
815 }
816
817 /* Setup required timing */
818 pwr_mgmt_ctrl = (timeout << shift) & mask;
819 /* setup a default mask for rest of the modes */
820 pwr_mgmt_ctrl |= (SR_TIM_MASK | CS_TIM_MASK | PD_TIM_MASK) &
821 ~mask;
822
823 /* No CS_TIM in EMIF_4D5 */
824 if (ip_rev == EMIF_4D5)
825 pwr_mgmt_ctrl &= ~CS_TIM_MASK;
826
827 pwr_mgmt_ctrl |= lpmode << LP_MODE_SHIFT;
828
829 return pwr_mgmt_ctrl;
830}
831
832/*
833 * Get the temperature level of the EMIF instance:
834 * Reads the MR4 register of attached SDRAM parts to find out the temperature
835 * level. If there are two parts attached(one on each CS), then the temperature
836 * level for the EMIF instance is the higher of the two temperatures.
837 */
838static void get_temperature_level(struct emif_data *emif)
839{
840 u32 temp, temperature_level;
841 void __iomem *base;
842
843 base = emif->base;
844
845 /* Read mode register 4 */
846 writel(DDR_MR4, base + EMIF_LPDDR2_MODE_REG_CONFIG);
847 temperature_level = readl(base + EMIF_LPDDR2_MODE_REG_DATA);
848 temperature_level = (temperature_level & MR4_SDRAM_REF_RATE_MASK) >>
849 MR4_SDRAM_REF_RATE_SHIFT;
850
851 if (emif->plat_data->device_info->cs1_used) {
852 writel(DDR_MR4 | CS_MASK, base + EMIF_LPDDR2_MODE_REG_CONFIG);
853 temp = readl(base + EMIF_LPDDR2_MODE_REG_DATA);
854 temp = (temp & MR4_SDRAM_REF_RATE_MASK)
855 >> MR4_SDRAM_REF_RATE_SHIFT;
856 temperature_level = max(temp, temperature_level);
857 }
858
859 /* treat everything less than nominal(3) in MR4 as nominal */
860 if (unlikely(temperature_level < SDRAM_TEMP_NOMINAL))
861 temperature_level = SDRAM_TEMP_NOMINAL;
862
863 /* if we get reserved value in MR4 persist with the existing value */
864 if (likely(temperature_level != SDRAM_TEMP_RESERVED_4))
865 emif->temperature_level = temperature_level;
866}
867
868/*
869 * Program EMIF shadow registers that are not dependent on temperature
870 * or voltage
871 */
872static void setup_registers(struct emif_data *emif, struct emif_regs *regs)
873{
874 void __iomem *base = emif->base;
875
876 writel(regs->sdram_tim2_shdw, base + EMIF_SDRAM_TIMING_2_SHDW);
877 writel(regs->phy_ctrl_1_shdw, base + EMIF_DDR_PHY_CTRL_1_SHDW);
878 writel(regs->pwr_mgmt_ctrl_shdw,
879 base + EMIF_POWER_MANAGEMENT_CTRL_SHDW);
880
881 /* Settings specific for EMIF4D5 */
882 if (emif->plat_data->ip_rev != EMIF_4D5)
883 return;
884 writel(regs->ext_phy_ctrl_2_shdw, base + EMIF_EXT_PHY_CTRL_2_SHDW);
885 writel(regs->ext_phy_ctrl_3_shdw, base + EMIF_EXT_PHY_CTRL_3_SHDW);
886 writel(regs->ext_phy_ctrl_4_shdw, base + EMIF_EXT_PHY_CTRL_4_SHDW);
887}
888
889/*
890 * When voltage ramps dll calibration and forced read idle should
891 * happen more often
892 */
893static void setup_volt_sensitive_regs(struct emif_data *emif,
894 struct emif_regs *regs, u32 volt_state)
895{
896 u32 calib_ctrl;
897 void __iomem *base = emif->base;
898
899 /*
900 * EMIF_READ_IDLE_CTRL in EMIF4D refers to the same register as
901 * EMIF_DLL_CALIB_CTRL in EMIF4D5 and dll_calib_ctrl_shadow_*
902 * is an alias of the respective read_idle_ctrl_shdw_* (members of
903 * a union). So, the below code takes care of both cases
904 */
905 if (volt_state == DDR_VOLTAGE_RAMPING)
906 calib_ctrl = regs->dll_calib_ctrl_shdw_volt_ramp;
907 else
908 calib_ctrl = regs->dll_calib_ctrl_shdw_normal;
909
910 writel(calib_ctrl, base + EMIF_DLL_CALIB_CTRL_SHDW);
911}
912
913/*
914 * setup_temperature_sensitive_regs() - set the timings for temperature
915 * sensitive registers. This happens once at initialisation time based
916 * on the temperature at boot time and subsequently based on the temperature
917 * alert interrupt. Temperature alert can happen when the temperature
918 * increases or drops. So this function can have the effect of either
919 * derating the timings or going back to nominal values.
920 */
921static void setup_temperature_sensitive_regs(struct emif_data *emif,
922 struct emif_regs *regs)
923{
924 u32 tim1, tim3, ref_ctrl, type;
925 void __iomem *base = emif->base;
926 u32 temperature;
927
928 type = emif->plat_data->device_info->type;
929
930 tim1 = regs->sdram_tim1_shdw;
931 tim3 = regs->sdram_tim3_shdw;
932 ref_ctrl = regs->ref_ctrl_shdw;
933
934 /* No de-rating for non-lpddr2 devices */
935 if (type != DDR_TYPE_LPDDR2_S2 && type != DDR_TYPE_LPDDR2_S4)
936 goto out;
937
938 temperature = emif->temperature_level;
939 if (temperature == SDRAM_TEMP_HIGH_DERATE_REFRESH) {
940 ref_ctrl = regs->ref_ctrl_shdw_derated;
941 } else if (temperature == SDRAM_TEMP_HIGH_DERATE_REFRESH_AND_TIMINGS) {
942 tim1 = regs->sdram_tim1_shdw_derated;
943 tim3 = regs->sdram_tim3_shdw_derated;
944 ref_ctrl = regs->ref_ctrl_shdw_derated;
945 }
946
947out:
948 writel(tim1, base + EMIF_SDRAM_TIMING_1_SHDW);
949 writel(tim3, base + EMIF_SDRAM_TIMING_3_SHDW);
950 writel(ref_ctrl, base + EMIF_SDRAM_REFRESH_CTRL_SHDW);
951}
952
953static irqreturn_t handle_temp_alert(void __iomem *base, struct emif_data *emif)
954{
955 u32 old_temp_level;
956 irqreturn_t ret = IRQ_HANDLED;
957 struct emif_custom_configs *custom_configs;
958
959 spin_lock_irqsave(&emif_lock, irq_state);
960 old_temp_level = emif->temperature_level;
961 get_temperature_level(emif);
962
963 if (unlikely(emif->temperature_level == old_temp_level)) {
964 goto out;
965 } else if (!emif->curr_regs) {
966 dev_err(emif->dev, "temperature alert before registers are calculated, not de-rating timings\n");
967 goto out;
968 }
969
970 custom_configs = emif->plat_data->custom_configs;
971
972 /*
973 * IF we detect higher than "nominal rating" from DDR sensor
974 * on an unsupported DDR part, shutdown system
975 */
976 if (custom_configs && !(custom_configs->mask &
977 EMIF_CUSTOM_CONFIG_EXTENDED_TEMP_PART)) {
978 if (emif->temperature_level >= SDRAM_TEMP_HIGH_DERATE_REFRESH) {
979 dev_err(emif->dev,
980 "%s:NOT Extended temperature capable memory."
981 "Converting MR4=0x%02x as shutdown event\n",
982 __func__, emif->temperature_level);
983 /*
984 * Temperature far too high - do kernel_power_off()
985 * from thread context
986 */
987 emif->temperature_level = SDRAM_TEMP_VERY_HIGH_SHUTDOWN;
988 ret = IRQ_WAKE_THREAD;
989 goto out;
990 }
991 }
992
993 if (emif->temperature_level < old_temp_level ||
994 emif->temperature_level == SDRAM_TEMP_VERY_HIGH_SHUTDOWN) {
995 /*
996 * Temperature coming down - defer handling to thread OR
997 * Temperature far too high - do kernel_power_off() from
998 * thread context
999 */
1000 ret = IRQ_WAKE_THREAD;
1001 } else {
1002 /* Temperature is going up - handle immediately */
1003 setup_temperature_sensitive_regs(emif, emif->curr_regs);
1004 do_freq_update();
1005 }
1006
1007out:
1008 spin_unlock_irqrestore(&emif_lock, irq_state);
1009 return ret;
1010}
1011
1012static irqreturn_t emif_interrupt_handler(int irq, void *dev_id)
1013{
1014 u32 interrupts;
1015 struct emif_data *emif = dev_id;
1016 void __iomem *base = emif->base;
1017 struct device *dev = emif->dev;
1018 irqreturn_t ret = IRQ_HANDLED;
1019
1020 /* Save the status and clear it */
1021 interrupts = readl(base + EMIF_SYSTEM_OCP_INTERRUPT_STATUS);
1022 writel(interrupts, base + EMIF_SYSTEM_OCP_INTERRUPT_STATUS);
1023
1024 /*
1025 * Handle temperature alert
1026 * Temperature alert should be same for all ports
1027 * So, it's enough to process it only for one of the ports
1028 */
1029 if (interrupts & TA_SYS_MASK)
1030 ret = handle_temp_alert(base, emif);
1031
1032 if (interrupts & ERR_SYS_MASK)
1033 dev_err(dev, "Access error from SYS port - %x\n", interrupts);
1034
1035 if (emif->plat_data->hw_caps & EMIF_HW_CAPS_LL_INTERFACE) {
1036 /* Save the status and clear it */
1037 interrupts = readl(base + EMIF_LL_OCP_INTERRUPT_STATUS);
1038 writel(interrupts, base + EMIF_LL_OCP_INTERRUPT_STATUS);
1039
1040 if (interrupts & ERR_LL_MASK)
1041 dev_err(dev, "Access error from LL port - %x\n",
1042 interrupts);
1043 }
1044
1045 return ret;
1046}
1047
1048static irqreturn_t emif_threaded_isr(int irq, void *dev_id)
1049{
1050 struct emif_data *emif = dev_id;
1051
1052 if (emif->temperature_level == SDRAM_TEMP_VERY_HIGH_SHUTDOWN) {
1053 dev_emerg(emif->dev, "SDRAM temperature exceeds operating limit.. Needs shut down!!!\n");
1054
1055 /* If we have Power OFF ability, use it, else try restarting */
1056 if (pm_power_off) {
1057 kernel_power_off();
1058 } else {
1059 WARN(1, "FIXME: NO pm_power_off!!! trying restart\n");
1060 kernel_restart("SDRAM Over-temp Emergency restart");
1061 }
1062 return IRQ_HANDLED;
1063 }
1064
1065 spin_lock_irqsave(&emif_lock, irq_state);
1066
1067 if (emif->curr_regs) {
1068 setup_temperature_sensitive_regs(emif, emif->curr_regs);
1069 do_freq_update();
1070 } else {
1071 dev_err(emif->dev, "temperature alert before registers are calculated, not de-rating timings\n");
1072 }
1073
1074 spin_unlock_irqrestore(&emif_lock, irq_state);
1075
1076 return IRQ_HANDLED;
1077}
1078
1079static void clear_all_interrupts(struct emif_data *emif)
1080{
1081 void __iomem *base = emif->base;
1082
1083 writel(readl(base + EMIF_SYSTEM_OCP_INTERRUPT_STATUS),
1084 base + EMIF_SYSTEM_OCP_INTERRUPT_STATUS);
1085 if (emif->plat_data->hw_caps & EMIF_HW_CAPS_LL_INTERFACE)
1086 writel(readl(base + EMIF_LL_OCP_INTERRUPT_STATUS),
1087 base + EMIF_LL_OCP_INTERRUPT_STATUS);
1088}
1089
1090static void disable_and_clear_all_interrupts(struct emif_data *emif)
1091{
1092 void __iomem *base = emif->base;
1093
1094 /* Disable all interrupts */
1095 writel(readl(base + EMIF_SYSTEM_OCP_INTERRUPT_ENABLE_SET),
1096 base + EMIF_SYSTEM_OCP_INTERRUPT_ENABLE_CLEAR);
1097 if (emif->plat_data->hw_caps & EMIF_HW_CAPS_LL_INTERFACE)
1098 writel(readl(base + EMIF_LL_OCP_INTERRUPT_ENABLE_SET),
1099 base + EMIF_LL_OCP_INTERRUPT_ENABLE_CLEAR);
1100
1101 /* Clear all interrupts */
1102 clear_all_interrupts(emif);
1103}
1104
1105static int __init_or_module setup_interrupts(struct emif_data *emif, u32 irq)
1106{
1107 u32 interrupts, type;
1108 void __iomem *base = emif->base;
1109
1110 type = emif->plat_data->device_info->type;
1111
1112 clear_all_interrupts(emif);
1113
1114 /* Enable interrupts for SYS interface */
1115 interrupts = EN_ERR_SYS_MASK;
1116 if (type == DDR_TYPE_LPDDR2_S2 || type == DDR_TYPE_LPDDR2_S4)
1117 interrupts |= EN_TA_SYS_MASK;
1118 writel(interrupts, base + EMIF_SYSTEM_OCP_INTERRUPT_ENABLE_SET);
1119
1120 /* Enable interrupts for LL interface */
1121 if (emif->plat_data->hw_caps & EMIF_HW_CAPS_LL_INTERFACE) {
1122 /* TA need not be enabled for LL */
1123 interrupts = EN_ERR_LL_MASK;
1124 writel(interrupts, base + EMIF_LL_OCP_INTERRUPT_ENABLE_SET);
1125 }
1126
1127 /* setup IRQ handlers */
1128 return devm_request_threaded_irq(emif->dev, irq,
1129 emif_interrupt_handler,
1130 emif_threaded_isr,
1131 0, dev_name(emif->dev),
1132 emif);
1133
1134}
1135
1136static void __init_or_module emif_onetime_settings(struct emif_data *emif)
1137{
1138 u32 pwr_mgmt_ctrl, zq, temp_alert_cfg;
1139 void __iomem *base = emif->base;
1140 const struct lpddr2_addressing *addressing;
1141 const struct ddr_device_info *device_info;
1142
1143 device_info = emif->plat_data->device_info;
1144 addressing = get_addressing_table(device_info);
1145
1146 /*
1147 * Init power management settings
1148 * We don't know the frequency yet. Use a high frequency
1149 * value for a conservative timeout setting
1150 */
1151 pwr_mgmt_ctrl = get_pwr_mgmt_ctrl(1000000000, emif,
1152 emif->plat_data->ip_rev);
1153 emif->lpmode = (pwr_mgmt_ctrl & LP_MODE_MASK) >> LP_MODE_SHIFT;
1154 writel(pwr_mgmt_ctrl, base + EMIF_POWER_MANAGEMENT_CONTROL);
1155
1156 /* Init ZQ calibration settings */
1157 zq = get_zq_config_reg(addressing, device_info->cs1_used,
1158 device_info->cal_resistors_per_cs);
1159 writel(zq, base + EMIF_SDRAM_OUTPUT_IMPEDANCE_CALIBRATION_CONFIG);
1160
1161 /* Check temperature level temperature level*/
1162 get_temperature_level(emif);
1163 if (emif->temperature_level == SDRAM_TEMP_VERY_HIGH_SHUTDOWN)
1164 dev_emerg(emif->dev, "SDRAM temperature exceeds operating limit.. Needs shut down!!!\n");
1165
1166 /* Init temperature polling */
1167 temp_alert_cfg = get_temp_alert_config(addressing,
1168 emif->plat_data->custom_configs, device_info->cs1_used,
1169 device_info->io_width, get_emif_bus_width(emif));
1170 writel(temp_alert_cfg, base + EMIF_TEMPERATURE_ALERT_CONFIG);
1171
1172 /*
1173 * Program external PHY control registers that are not frequency
1174 * dependent
1175 */
1176 if (emif->plat_data->phy_type != EMIF_PHY_TYPE_INTELLIPHY)
1177 return;
1178 writel(EMIF_EXT_PHY_CTRL_1_VAL, base + EMIF_EXT_PHY_CTRL_1_SHDW);
1179 writel(EMIF_EXT_PHY_CTRL_5_VAL, base + EMIF_EXT_PHY_CTRL_5_SHDW);
1180 writel(EMIF_EXT_PHY_CTRL_6_VAL, base + EMIF_EXT_PHY_CTRL_6_SHDW);
1181 writel(EMIF_EXT_PHY_CTRL_7_VAL, base + EMIF_EXT_PHY_CTRL_7_SHDW);
1182 writel(EMIF_EXT_PHY_CTRL_8_VAL, base + EMIF_EXT_PHY_CTRL_8_SHDW);
1183 writel(EMIF_EXT_PHY_CTRL_9_VAL, base + EMIF_EXT_PHY_CTRL_9_SHDW);
1184 writel(EMIF_EXT_PHY_CTRL_10_VAL, base + EMIF_EXT_PHY_CTRL_10_SHDW);
1185 writel(EMIF_EXT_PHY_CTRL_11_VAL, base + EMIF_EXT_PHY_CTRL_11_SHDW);
1186 writel(EMIF_EXT_PHY_CTRL_12_VAL, base + EMIF_EXT_PHY_CTRL_12_SHDW);
1187 writel(EMIF_EXT_PHY_CTRL_13_VAL, base + EMIF_EXT_PHY_CTRL_13_SHDW);
1188 writel(EMIF_EXT_PHY_CTRL_14_VAL, base + EMIF_EXT_PHY_CTRL_14_SHDW);
1189 writel(EMIF_EXT_PHY_CTRL_15_VAL, base + EMIF_EXT_PHY_CTRL_15_SHDW);
1190 writel(EMIF_EXT_PHY_CTRL_16_VAL, base + EMIF_EXT_PHY_CTRL_16_SHDW);
1191 writel(EMIF_EXT_PHY_CTRL_17_VAL, base + EMIF_EXT_PHY_CTRL_17_SHDW);
1192 writel(EMIF_EXT_PHY_CTRL_18_VAL, base + EMIF_EXT_PHY_CTRL_18_SHDW);
1193 writel(EMIF_EXT_PHY_CTRL_19_VAL, base + EMIF_EXT_PHY_CTRL_19_SHDW);
1194 writel(EMIF_EXT_PHY_CTRL_20_VAL, base + EMIF_EXT_PHY_CTRL_20_SHDW);
1195 writel(EMIF_EXT_PHY_CTRL_21_VAL, base + EMIF_EXT_PHY_CTRL_21_SHDW);
1196 writel(EMIF_EXT_PHY_CTRL_22_VAL, base + EMIF_EXT_PHY_CTRL_22_SHDW);
1197 writel(EMIF_EXT_PHY_CTRL_23_VAL, base + EMIF_EXT_PHY_CTRL_23_SHDW);
1198 writel(EMIF_EXT_PHY_CTRL_24_VAL, base + EMIF_EXT_PHY_CTRL_24_SHDW);
1199}
1200
1201static void get_default_timings(struct emif_data *emif)
1202{
1203 struct emif_platform_data *pd = emif->plat_data;
1204
1205 pd->timings = lpddr2_jedec_timings;
1206 pd->timings_arr_size = ARRAY_SIZE(lpddr2_jedec_timings);
1207
1208 dev_warn(emif->dev, "%s: using default timings\n", __func__);
1209}
1210
1211static int is_dev_data_valid(u32 type, u32 density, u32 io_width, u32 phy_type,
1212 u32 ip_rev, struct device *dev)
1213{
1214 int valid;
1215
1216 valid = (type == DDR_TYPE_LPDDR2_S4 ||
1217 type == DDR_TYPE_LPDDR2_S2)
1218 && (density >= DDR_DENSITY_64Mb
1219 && density <= DDR_DENSITY_8Gb)
1220 && (io_width >= DDR_IO_WIDTH_8
1221 && io_width <= DDR_IO_WIDTH_32);
1222
1223 /* Combinations of EMIF and PHY revisions that we support today */
1224 switch (ip_rev) {
1225 case EMIF_4D:
1226 valid = valid && (phy_type == EMIF_PHY_TYPE_ATTILAPHY);
1227 break;
1228 case EMIF_4D5:
1229 valid = valid && (phy_type == EMIF_PHY_TYPE_INTELLIPHY);
1230 break;
1231 default:
1232 valid = 0;
1233 }
1234
1235 if (!valid)
1236 dev_err(dev, "%s: invalid DDR details\n", __func__);
1237 return valid;
1238}
1239
1240static int is_custom_config_valid(struct emif_custom_configs *cust_cfgs,
1241 struct device *dev)
1242{
1243 int valid = 1;
1244
1245 if ((cust_cfgs->mask & EMIF_CUSTOM_CONFIG_LPMODE) &&
1246 (cust_cfgs->lpmode != EMIF_LP_MODE_DISABLE))
1247 valid = cust_cfgs->lpmode_freq_threshold &&
1248 cust_cfgs->lpmode_timeout_performance &&
1249 cust_cfgs->lpmode_timeout_power;
1250
1251 if (cust_cfgs->mask & EMIF_CUSTOM_CONFIG_TEMP_ALERT_POLL_INTERVAL)
1252 valid = valid && cust_cfgs->temp_alert_poll_interval_ms;
1253
1254 if (!valid)
1255 dev_warn(dev, "%s: invalid custom configs\n", __func__);
1256
1257 return valid;
1258}
1259
1260#if defined(CONFIG_OF)
1261static void __init_or_module of_get_custom_configs(struct device_node *np_emif,
1262 struct emif_data *emif)
1263{
1264 struct emif_custom_configs *cust_cfgs = NULL;
1265 int len;
1266 const __be32 *lpmode, *poll_intvl;
1267
1268 lpmode = of_get_property(np_emif, "low-power-mode", &len);
1269 poll_intvl = of_get_property(np_emif, "temp-alert-poll-interval", &len);
1270
1271 if (lpmode || poll_intvl)
1272 cust_cfgs = devm_kzalloc(emif->dev, sizeof(*cust_cfgs),
1273 GFP_KERNEL);
1274
1275 if (!cust_cfgs)
1276 return;
1277
1278 if (lpmode) {
1279 cust_cfgs->mask |= EMIF_CUSTOM_CONFIG_LPMODE;
1280 cust_cfgs->lpmode = be32_to_cpup(lpmode);
1281 of_property_read_u32(np_emif,
1282 "low-power-mode-timeout-performance",
1283 &cust_cfgs->lpmode_timeout_performance);
1284 of_property_read_u32(np_emif,
1285 "low-power-mode-timeout-power",
1286 &cust_cfgs->lpmode_timeout_power);
1287 of_property_read_u32(np_emif,
1288 "low-power-mode-freq-threshold",
1289 &cust_cfgs->lpmode_freq_threshold);
1290 }
1291
1292 if (poll_intvl) {
1293 cust_cfgs->mask |=
1294 EMIF_CUSTOM_CONFIG_TEMP_ALERT_POLL_INTERVAL;
1295 cust_cfgs->temp_alert_poll_interval_ms =
1296 be32_to_cpup(poll_intvl);
1297 }
1298
1299 if (of_find_property(np_emif, "extended-temp-part", &len))
1300 cust_cfgs->mask |= EMIF_CUSTOM_CONFIG_EXTENDED_TEMP_PART;
1301
1302 if (!is_custom_config_valid(cust_cfgs, emif->dev)) {
1303 devm_kfree(emif->dev, cust_cfgs);
1304 return;
1305 }
1306
1307 emif->plat_data->custom_configs = cust_cfgs;
1308}
1309
1310static void __init_or_module of_get_ddr_info(struct device_node *np_emif,
1311 struct device_node *np_ddr,
1312 struct ddr_device_info *dev_info)
1313{
1314 u32 density = 0, io_width = 0;
1315 int len;
1316
1317 if (of_find_property(np_emif, "cs1-used", &len))
1318 dev_info->cs1_used = true;
1319
1320 if (of_find_property(np_emif, "cal-resistor-per-cs", &len))
1321 dev_info->cal_resistors_per_cs = true;
1322
1323 if (of_device_is_compatible(np_ddr , "jedec,lpddr2-s4"))
1324 dev_info->type = DDR_TYPE_LPDDR2_S4;
1325 else if (of_device_is_compatible(np_ddr , "jedec,lpddr2-s2"))
1326 dev_info->type = DDR_TYPE_LPDDR2_S2;
1327
1328 of_property_read_u32(np_ddr, "density", &density);
1329 of_property_read_u32(np_ddr, "io-width", &io_width);
1330
1331 /* Convert from density in Mb to the density encoding in jedc_ddr.h */
1332 if (density & (density - 1))
1333 dev_info->density = 0;
1334 else
1335 dev_info->density = __fls(density) - 5;
1336
1337 /* Convert from io_width in bits to io_width encoding in jedc_ddr.h */
1338 if (io_width & (io_width - 1))
1339 dev_info->io_width = 0;
1340 else
1341 dev_info->io_width = __fls(io_width) - 1;
1342}
1343
1344static struct emif_data * __init_or_module of_get_memory_device_details(
1345 struct device_node *np_emif, struct device *dev)
1346{
1347 struct emif_data *emif = NULL;
1348 struct ddr_device_info *dev_info = NULL;
1349 struct emif_platform_data *pd = NULL;
1350 struct device_node *np_ddr;
1351 int len;
1352
1353 np_ddr = of_parse_phandle(np_emif, "device-handle", 0);
1354 if (!np_ddr)
1355 goto error;
1356 emif = devm_kzalloc(dev, sizeof(struct emif_data), GFP_KERNEL);
1357 pd = devm_kzalloc(dev, sizeof(*pd), GFP_KERNEL);
1358 dev_info = devm_kzalloc(dev, sizeof(*dev_info), GFP_KERNEL);
1359
1360 if (!emif || !pd || !dev_info) {
1361 dev_err(dev, "%s: Out of memory!!\n",
1362 __func__);
1363 goto error;
1364 }
1365
1366 emif->plat_data = pd;
1367 pd->device_info = dev_info;
1368 emif->dev = dev;
1369 emif->np_ddr = np_ddr;
1370 emif->temperature_level = SDRAM_TEMP_NOMINAL;
1371
1372 if (of_device_is_compatible(np_emif, "ti,emif-4d"))
1373 emif->plat_data->ip_rev = EMIF_4D;
1374 else if (of_device_is_compatible(np_emif, "ti,emif-4d5"))
1375 emif->plat_data->ip_rev = EMIF_4D5;
1376
1377 of_property_read_u32(np_emif, "phy-type", &pd->phy_type);
1378
1379 if (of_find_property(np_emif, "hw-caps-ll-interface", &len))
1380 pd->hw_caps |= EMIF_HW_CAPS_LL_INTERFACE;
1381
1382 of_get_ddr_info(np_emif, np_ddr, dev_info);
1383 if (!is_dev_data_valid(pd->device_info->type, pd->device_info->density,
1384 pd->device_info->io_width, pd->phy_type, pd->ip_rev,
1385 emif->dev)) {
1386 dev_err(dev, "%s: invalid device data!!\n", __func__);
1387 goto error;
1388 }
1389 /*
1390 * For EMIF instances other than EMIF1 see if the devices connected
1391 * are exactly same as on EMIF1(which is typically the case). If so,
1392 * mark it as a duplicate of EMIF1. This will save some memory and
1393 * computation.
1394 */
1395 if (emif1 && emif1->np_ddr == np_ddr) {
1396 emif->duplicate = true;
1397 goto out;
1398 } else if (emif1) {
1399 dev_warn(emif->dev, "%s: Non-symmetric DDR geometry\n",
1400 __func__);
1401 }
1402
1403 of_get_custom_configs(np_emif, emif);
1404 emif->plat_data->timings = of_get_ddr_timings(np_ddr, emif->dev,
1405 emif->plat_data->device_info->type,
1406 &emif->plat_data->timings_arr_size);
1407
1408 emif->plat_data->min_tck = of_get_min_tck(np_ddr, emif->dev);
1409 goto out;
1410
1411error:
1412 return NULL;
1413out:
1414 return emif;
1415}
1416
1417#else
1418
1419static struct emif_data * __init_or_module of_get_memory_device_details(
1420 struct device_node *np_emif, struct device *dev)
1421{
1422 return NULL;
1423}
1424#endif
1425
1426static struct emif_data *__init_or_module get_device_details(
1427 struct platform_device *pdev)
1428{
1429 u32 size;
1430 struct emif_data *emif = NULL;
1431 struct ddr_device_info *dev_info;
1432 struct emif_custom_configs *cust_cfgs;
1433 struct emif_platform_data *pd;
1434 struct device *dev;
1435 void *temp;
1436
1437 pd = pdev->dev.platform_data;
1438 dev = &pdev->dev;
1439
1440 if (!(pd && pd->device_info && is_dev_data_valid(pd->device_info->type,
1441 pd->device_info->density, pd->device_info->io_width,
1442 pd->phy_type, pd->ip_rev, dev))) {
1443 dev_err(dev, "%s: invalid device data\n", __func__);
1444 goto error;
1445 }
1446
1447 emif = devm_kzalloc(dev, sizeof(*emif), GFP_KERNEL);
1448 temp = devm_kzalloc(dev, sizeof(*pd), GFP_KERNEL);
1449 dev_info = devm_kzalloc(dev, sizeof(*dev_info), GFP_KERNEL);
1450
1451 if (!emif || !pd || !dev_info) {
1452 dev_err(dev, "%s:%d: allocation error\n", __func__, __LINE__);
1453 goto error;
1454 }
1455
1456 memcpy(temp, pd, sizeof(*pd));
1457 pd = temp;
1458 memcpy(dev_info, pd->device_info, sizeof(*dev_info));
1459
1460 pd->device_info = dev_info;
1461 emif->plat_data = pd;
1462 emif->dev = dev;
1463 emif->temperature_level = SDRAM_TEMP_NOMINAL;
1464
1465 /*
1466 * For EMIF instances other than EMIF1 see if the devices connected
1467 * are exactly same as on EMIF1(which is typically the case). If so,
1468 * mark it as a duplicate of EMIF1 and skip copying timings data.
1469 * This will save some memory and some computation later.
1470 */
1471 emif->duplicate = emif1 && (memcmp(dev_info,
1472 emif1->plat_data->device_info,
1473 sizeof(struct ddr_device_info)) == 0);
1474
1475 if (emif->duplicate) {
1476 pd->timings = NULL;
1477 pd->min_tck = NULL;
1478 goto out;
1479 } else if (emif1) {
1480 dev_warn(emif->dev, "%s: Non-symmetric DDR geometry\n",
1481 __func__);
1482 }
1483
1484 /*
1485 * Copy custom configs - ignore allocation error, if any, as
1486 * custom_configs is not very critical
1487 */
1488 cust_cfgs = pd->custom_configs;
1489 if (cust_cfgs && is_custom_config_valid(cust_cfgs, dev)) {
1490 temp = devm_kzalloc(dev, sizeof(*cust_cfgs), GFP_KERNEL);
1491 if (temp)
1492 memcpy(temp, cust_cfgs, sizeof(*cust_cfgs));
1493 else
1494 dev_warn(dev, "%s:%d: allocation error\n", __func__,
1495 __LINE__);
1496 pd->custom_configs = temp;
1497 }
1498
1499 /*
1500 * Copy timings and min-tck values from platform data. If it is not
1501 * available or if memory allocation fails, use JEDEC defaults
1502 */
1503 size = sizeof(struct lpddr2_timings) * pd->timings_arr_size;
1504 if (pd->timings) {
1505 temp = devm_kzalloc(dev, size, GFP_KERNEL);
1506 if (temp) {
1507 memcpy(temp, pd->timings, size);
1508 pd->timings = temp;
1509 } else {
1510 dev_warn(dev, "%s:%d: allocation error\n", __func__,
1511 __LINE__);
1512 get_default_timings(emif);
1513 }
1514 } else {
1515 get_default_timings(emif);
1516 }
1517
1518 if (pd->min_tck) {
1519 temp = devm_kzalloc(dev, sizeof(*pd->min_tck), GFP_KERNEL);
1520 if (temp) {
1521 memcpy(temp, pd->min_tck, sizeof(*pd->min_tck));
1522 pd->min_tck = temp;
1523 } else {
1524 dev_warn(dev, "%s:%d: allocation error\n", __func__,
1525 __LINE__);
1526 pd->min_tck = &lpddr2_jedec_min_tck;
1527 }
1528 } else {
1529 pd->min_tck = &lpddr2_jedec_min_tck;
1530 }
1531
1532out:
1533 return emif;
1534
1535error:
1536 return NULL;
1537}
1538
1539static int __init_or_module emif_probe(struct platform_device *pdev)
1540{
1541 struct emif_data *emif;
1542 struct resource *res;
1543 int irq;
1544
1545 if (pdev->dev.of_node)
1546 emif = of_get_memory_device_details(pdev->dev.of_node, &pdev->dev);
1547 else
1548 emif = get_device_details(pdev);
1549
1550 if (!emif) {
1551 pr_err("%s: error getting device data\n", __func__);
1552 goto error;
1553 }
1554
1555 list_add(&emif->node, &device_list);
1556 emif->addressing = get_addressing_table(emif->plat_data->device_info);
1557
1558 /* Save pointers to each other in emif and device structures */
1559 emif->dev = &pdev->dev;
1560 platform_set_drvdata(pdev, emif);
1561
1562 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1563 emif->base = devm_ioremap_resource(emif->dev, res);
1564 if (IS_ERR(emif->base))
1565 goto error;
1566
1567 irq = platform_get_irq(pdev, 0);
1568 if (irq < 0) {
1569 dev_err(emif->dev, "%s: error getting IRQ resource - %d\n",
1570 __func__, irq);
1571 goto error;
1572 }
1573
1574 emif_onetime_settings(emif);
1575 emif_debugfs_init(emif);
1576 disable_and_clear_all_interrupts(emif);
1577 setup_interrupts(emif, irq);
1578
1579 /* One-time actions taken on probing the first device */
1580 if (!emif1) {
1581 emif1 = emif;
1582 spin_lock_init(&emif_lock);
1583
1584 /*
1585 * TODO: register notifiers for frequency and voltage
1586 * change here once the respective frameworks are
1587 * available
1588 */
1589 }
1590
1591 dev_info(&pdev->dev, "%s: device configured with addr = %p and IRQ%d\n",
1592 __func__, emif->base, irq);
1593
1594 return 0;
1595error:
1596 return -ENODEV;
1597}
1598
1599static int __exit emif_remove(struct platform_device *pdev)
1600{
1601 struct emif_data *emif = platform_get_drvdata(pdev);
1602
1603 emif_debugfs_exit(emif);
1604
1605 return 0;
1606}
1607
1608static void emif_shutdown(struct platform_device *pdev)
1609{
1610 struct emif_data *emif = platform_get_drvdata(pdev);
1611
1612 disable_and_clear_all_interrupts(emif);
1613}
1614
1615static int get_emif_reg_values(struct emif_data *emif, u32 freq,
1616 struct emif_regs *regs)
1617{
1618 u32 cs1_used, ip_rev, phy_type;
1619 u32 cl, type;
1620 const struct lpddr2_timings *timings;
1621 const struct lpddr2_min_tck *min_tck;
1622 const struct ddr_device_info *device_info;
1623 const struct lpddr2_addressing *addressing;
1624 struct emif_data *emif_for_calc;
1625 struct device *dev;
1626 const struct emif_custom_configs *custom_configs;
1627
1628 dev = emif->dev;
1629 /*
1630 * If the devices on this EMIF instance is duplicate of EMIF1,
1631 * use EMIF1 details for the calculation
1632 */
1633 emif_for_calc = emif->duplicate ? emif1 : emif;
1634 timings = get_timings_table(emif_for_calc, freq);
1635 addressing = emif_for_calc->addressing;
1636 if (!timings || !addressing) {
1637 dev_err(dev, "%s: not enough data available for %dHz",
1638 __func__, freq);
1639 return -1;
1640 }
1641
1642 device_info = emif_for_calc->plat_data->device_info;
1643 type = device_info->type;
1644 cs1_used = device_info->cs1_used;
1645 ip_rev = emif_for_calc->plat_data->ip_rev;
1646 phy_type = emif_for_calc->plat_data->phy_type;
1647
1648 min_tck = emif_for_calc->plat_data->min_tck;
1649 custom_configs = emif_for_calc->plat_data->custom_configs;
1650
1651 set_ddr_clk_period(freq);
1652
1653 regs->ref_ctrl_shdw = get_sdram_ref_ctrl_shdw(freq, addressing);
1654 regs->sdram_tim1_shdw = get_sdram_tim_1_shdw(timings, min_tck,
1655 addressing);
1656 regs->sdram_tim2_shdw = get_sdram_tim_2_shdw(timings, min_tck,
1657 addressing, type);
1658 regs->sdram_tim3_shdw = get_sdram_tim_3_shdw(timings, min_tck,
1659 addressing, type, ip_rev, EMIF_NORMAL_TIMINGS);
1660
1661 cl = get_cl(emif);
1662
1663 if (phy_type == EMIF_PHY_TYPE_ATTILAPHY && ip_rev == EMIF_4D) {
1664 regs->phy_ctrl_1_shdw = get_ddr_phy_ctrl_1_attilaphy_4d(
1665 timings, freq, cl);
1666 } else if (phy_type == EMIF_PHY_TYPE_INTELLIPHY && ip_rev == EMIF_4D5) {
1667 regs->phy_ctrl_1_shdw = get_phy_ctrl_1_intelliphy_4d5(freq, cl);
1668 regs->ext_phy_ctrl_2_shdw = get_ext_phy_ctrl_2_intelliphy_4d5();
1669 regs->ext_phy_ctrl_3_shdw = get_ext_phy_ctrl_3_intelliphy_4d5();
1670 regs->ext_phy_ctrl_4_shdw = get_ext_phy_ctrl_4_intelliphy_4d5();
1671 } else {
1672 return -1;
1673 }
1674
1675 /* Only timeout values in pwr_mgmt_ctrl_shdw register */
1676 regs->pwr_mgmt_ctrl_shdw =
1677 get_pwr_mgmt_ctrl(freq, emif_for_calc, ip_rev) &
1678 (CS_TIM_MASK | SR_TIM_MASK | PD_TIM_MASK);
1679
1680 if (ip_rev & EMIF_4D) {
1681 regs->read_idle_ctrl_shdw_normal =
1682 get_read_idle_ctrl_shdw(DDR_VOLTAGE_STABLE);
1683
1684 regs->read_idle_ctrl_shdw_volt_ramp =
1685 get_read_idle_ctrl_shdw(DDR_VOLTAGE_RAMPING);
1686 } else if (ip_rev & EMIF_4D5) {
1687 regs->dll_calib_ctrl_shdw_normal =
1688 get_dll_calib_ctrl_shdw(DDR_VOLTAGE_STABLE);
1689
1690 regs->dll_calib_ctrl_shdw_volt_ramp =
1691 get_dll_calib_ctrl_shdw(DDR_VOLTAGE_RAMPING);
1692 }
1693
1694 if (type == DDR_TYPE_LPDDR2_S2 || type == DDR_TYPE_LPDDR2_S4) {
1695 regs->ref_ctrl_shdw_derated = get_sdram_ref_ctrl_shdw(freq / 4,
1696 addressing);
1697
1698 regs->sdram_tim1_shdw_derated =
1699 get_sdram_tim_1_shdw_derated(timings, min_tck,
1700 addressing);
1701
1702 regs->sdram_tim3_shdw_derated = get_sdram_tim_3_shdw(timings,
1703 min_tck, addressing, type, ip_rev,
1704 EMIF_DERATED_TIMINGS);
1705 }
1706
1707 regs->freq = freq;
1708
1709 return 0;
1710}
1711
1712/*
1713 * get_regs() - gets the cached emif_regs structure for a given EMIF instance
1714 * given frequency(freq):
1715 *
1716 * As an optimisation, every EMIF instance other than EMIF1 shares the
1717 * register cache with EMIF1 if the devices connected on this instance
1718 * are same as that on EMIF1(indicated by the duplicate flag)
1719 *
1720 * If we do not have an entry corresponding to the frequency given, we
1721 * allocate a new entry and calculate the values
1722 *
1723 * Upon finding the right reg dump, save it in curr_regs. It can be
1724 * directly used for thermal de-rating and voltage ramping changes.
1725 */
1726static struct emif_regs *get_regs(struct emif_data *emif, u32 freq)
1727{
1728 int i;
1729 struct emif_regs **regs_cache;
1730 struct emif_regs *regs = NULL;
1731 struct device *dev;
1732
1733 dev = emif->dev;
1734 if (emif->curr_regs && emif->curr_regs->freq == freq) {
1735 dev_dbg(dev, "%s: using curr_regs - %u Hz", __func__, freq);
1736 return emif->curr_regs;
1737 }
1738
1739 if (emif->duplicate)
1740 regs_cache = emif1->regs_cache;
1741 else
1742 regs_cache = emif->regs_cache;
1743
1744 for (i = 0; i < EMIF_MAX_NUM_FREQUENCIES && regs_cache[i]; i++) {
1745 if (regs_cache[i]->freq == freq) {
1746 regs = regs_cache[i];
1747 dev_dbg(dev,
1748 "%s: reg dump found in reg cache for %u Hz\n",
1749 __func__, freq);
1750 break;
1751 }
1752 }
1753
1754 /*
1755 * If we don't have an entry for this frequency in the cache create one
1756 * and calculate the values
1757 */
1758 if (!regs) {
1759 regs = devm_kzalloc(emif->dev, sizeof(*regs), GFP_ATOMIC);
1760 if (!regs)
1761 return NULL;
1762
1763 if (get_emif_reg_values(emif, freq, regs)) {
1764 devm_kfree(emif->dev, regs);
1765 return NULL;
1766 }
1767
1768 /*
1769 * Now look for an un-used entry in the cache and save the
1770 * newly created struct. If there are no free entries
1771 * over-write the last entry
1772 */
1773 for (i = 0; i < EMIF_MAX_NUM_FREQUENCIES && regs_cache[i]; i++)
1774 ;
1775
1776 if (i >= EMIF_MAX_NUM_FREQUENCIES) {
1777 dev_warn(dev, "%s: regs_cache full - reusing a slot!!\n",
1778 __func__);
1779 i = EMIF_MAX_NUM_FREQUENCIES - 1;
1780 devm_kfree(emif->dev, regs_cache[i]);
1781 }
1782 regs_cache[i] = regs;
1783 }
1784
1785 return regs;
1786}
1787
1788static void do_volt_notify_handling(struct emif_data *emif, u32 volt_state)
1789{
1790 dev_dbg(emif->dev, "%s: voltage notification : %d", __func__,
1791 volt_state);
1792
1793 if (!emif->curr_regs) {
1794 dev_err(emif->dev,
1795 "%s: volt-notify before registers are ready: %d\n",
1796 __func__, volt_state);
1797 return;
1798 }
1799
1800 setup_volt_sensitive_regs(emif, emif->curr_regs, volt_state);
1801}
1802
1803/*
1804 * TODO: voltage notify handling should be hooked up to
1805 * regulator framework as soon as the necessary support
1806 * is available in mainline kernel. This function is un-used
1807 * right now.
1808 */
1809static void __attribute__((unused)) volt_notify_handling(u32 volt_state)
1810{
1811 struct emif_data *emif;
1812
1813 spin_lock_irqsave(&emif_lock, irq_state);
1814
1815 list_for_each_entry(emif, &device_list, node)
1816 do_volt_notify_handling(emif, volt_state);
1817 do_freq_update();
1818
1819 spin_unlock_irqrestore(&emif_lock, irq_state);
1820}
1821
1822static void do_freq_pre_notify_handling(struct emif_data *emif, u32 new_freq)
1823{
1824 struct emif_regs *regs;
1825
1826 regs = get_regs(emif, new_freq);
1827 if (!regs)
1828 return;
1829
1830 emif->curr_regs = regs;
1831
1832 /*
1833 * Update the shadow registers:
1834 * Temperature and voltage-ramp sensitive settings are also configured
1835 * in terms of DDR cycles. So, we need to update them too when there
1836 * is a freq change
1837 */
1838 dev_dbg(emif->dev, "%s: setting up shadow registers for %uHz",
1839 __func__, new_freq);
1840 setup_registers(emif, regs);
1841 setup_temperature_sensitive_regs(emif, regs);
1842 setup_volt_sensitive_regs(emif, regs, DDR_VOLTAGE_STABLE);
1843
1844 /*
1845 * Part of workaround for errata i728. See do_freq_update()
1846 * for more details
1847 */
1848 if (emif->lpmode == EMIF_LP_MODE_SELF_REFRESH)
1849 set_lpmode(emif, EMIF_LP_MODE_DISABLE);
1850}
1851
1852/*
1853 * TODO: frequency notify handling should be hooked up to
1854 * clock framework as soon as the necessary support is
1855 * available in mainline kernel. This function is un-used
1856 * right now.
1857 */
1858static void __attribute__((unused)) freq_pre_notify_handling(u32 new_freq)
1859{
1860 struct emif_data *emif;
1861
1862 /*
1863 * NOTE: we are taking the spin-lock here and releases it
1864 * only in post-notifier. This doesn't look good and
1865 * Sparse complains about it, but this seems to be
1866 * un-avoidable. We need to lock a sequence of events
1867 * that is split between EMIF and clock framework.
1868 *
1869 * 1. EMIF driver updates EMIF timings in shadow registers in the
1870 * frequency pre-notify callback from clock framework
1871 * 2. clock framework sets up the registers for the new frequency
1872 * 3. clock framework initiates a hw-sequence that updates
1873 * the frequency EMIF timings synchronously.
1874 *
1875 * All these 3 steps should be performed as an atomic operation
1876 * vis-a-vis similar sequence in the EMIF interrupt handler
1877 * for temperature events. Otherwise, there could be race
1878 * conditions that could result in incorrect EMIF timings for
1879 * a given frequency
1880 */
1881 spin_lock_irqsave(&emif_lock, irq_state);
1882
1883 list_for_each_entry(emif, &device_list, node)
1884 do_freq_pre_notify_handling(emif, new_freq);
1885}
1886
1887static void do_freq_post_notify_handling(struct emif_data *emif)
1888{
1889 /*
1890 * Part of workaround for errata i728. See do_freq_update()
1891 * for more details
1892 */
1893 if (emif->lpmode == EMIF_LP_MODE_SELF_REFRESH)
1894 set_lpmode(emif, EMIF_LP_MODE_SELF_REFRESH);
1895}
1896
1897/*
1898 * TODO: frequency notify handling should be hooked up to
1899 * clock framework as soon as the necessary support is
1900 * available in mainline kernel. This function is un-used
1901 * right now.
1902 */
1903static void __attribute__((unused)) freq_post_notify_handling(void)
1904{
1905 struct emif_data *emif;
1906
1907 list_for_each_entry(emif, &device_list, node)
1908 do_freq_post_notify_handling(emif);
1909
1910 /*
1911 * Lock is done in pre-notify handler. See freq_pre_notify_handling()
1912 * for more details
1913 */
1914 spin_unlock_irqrestore(&emif_lock, irq_state);
1915}
1916
1917#if defined(CONFIG_OF)
1918static const struct of_device_id emif_of_match[] = {
1919 { .compatible = "ti,emif-4d" },
1920 { .compatible = "ti,emif-4d5" },
1921 {},
1922};
1923MODULE_DEVICE_TABLE(of, emif_of_match);
1924#endif
1925
1926static struct platform_driver emif_driver = {
1927 .remove = __exit_p(emif_remove),
1928 .shutdown = emif_shutdown,
1929 .driver = {
1930 .name = "emif",
1931 .of_match_table = of_match_ptr(emif_of_match),
1932 },
1933};
1934
1935module_platform_driver_probe(emif_driver, emif_probe);
1936
1937MODULE_DESCRIPTION("TI EMIF SDRAM Controller Driver");
1938MODULE_LICENSE("GPL");
1939MODULE_ALIAS("platform:emif");
1940MODULE_AUTHOR("Texas Instruments Inc");