Loading...
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * ACPI support for Intel Lynxpoint LPSS.
4 *
5 * Copyright (C) 2013, Intel Corporation
6 * Authors: Mika Westerberg <mika.westerberg@linux.intel.com>
7 * Rafael J. Wysocki <rafael.j.wysocki@intel.com>
8 */
9
10#include <linux/acpi.h>
11#include <linux/clkdev.h>
12#include <linux/clk-provider.h>
13#include <linux/dmi.h>
14#include <linux/err.h>
15#include <linux/io.h>
16#include <linux/mutex.h>
17#include <linux/pci.h>
18#include <linux/platform_device.h>
19#include <linux/platform_data/x86/clk-lpss.h>
20#include <linux/platform_data/x86/pmc_atom.h>
21#include <linux/pm_domain.h>
22#include <linux/pm_runtime.h>
23#include <linux/pwm.h>
24#include <linux/pxa2xx_ssp.h>
25#include <linux/suspend.h>
26#include <linux/delay.h>
27
28#include "internal.h"
29
30#ifdef CONFIG_X86_INTEL_LPSS
31
32#include <asm/cpu_device_id.h>
33#include <asm/intel-family.h>
34#include <asm/iosf_mbi.h>
35
36#define LPSS_ADDR(desc) ((unsigned long)&desc)
37
38#define LPSS_CLK_SIZE 0x04
39#define LPSS_LTR_SIZE 0x18
40
41/* Offsets relative to LPSS_PRIVATE_OFFSET */
42#define LPSS_CLK_DIVIDER_DEF_MASK (BIT(1) | BIT(16))
43#define LPSS_RESETS 0x04
44#define LPSS_RESETS_RESET_FUNC BIT(0)
45#define LPSS_RESETS_RESET_APB BIT(1)
46#define LPSS_GENERAL 0x08
47#define LPSS_GENERAL_LTR_MODE_SW BIT(2)
48#define LPSS_GENERAL_UART_RTS_OVRD BIT(3)
49#define LPSS_SW_LTR 0x10
50#define LPSS_AUTO_LTR 0x14
51#define LPSS_LTR_SNOOP_REQ BIT(15)
52#define LPSS_LTR_SNOOP_MASK 0x0000FFFF
53#define LPSS_LTR_SNOOP_LAT_1US 0x800
54#define LPSS_LTR_SNOOP_LAT_32US 0xC00
55#define LPSS_LTR_SNOOP_LAT_SHIFT 5
56#define LPSS_LTR_SNOOP_LAT_CUTOFF 3000
57#define LPSS_LTR_MAX_VAL 0x3FF
58#define LPSS_TX_INT 0x20
59#define LPSS_TX_INT_MASK BIT(1)
60
61#define LPSS_PRV_REG_COUNT 9
62
63/* LPSS Flags */
64#define LPSS_CLK BIT(0)
65#define LPSS_CLK_GATE BIT(1)
66#define LPSS_CLK_DIVIDER BIT(2)
67#define LPSS_LTR BIT(3)
68#define LPSS_SAVE_CTX BIT(4)
69/*
70 * For some devices the DSDT AML code for another device turns off the device
71 * before our suspend handler runs, causing us to read/save all 1-s (0xffffffff)
72 * as ctx register values.
73 * Luckily these devices always use the same ctx register values, so we can
74 * work around this by saving the ctx registers once on activation.
75 */
76#define LPSS_SAVE_CTX_ONCE BIT(5)
77#define LPSS_NO_D3_DELAY BIT(6)
78
79struct lpss_private_data;
80
81struct lpss_device_desc {
82 unsigned int flags;
83 const char *clk_con_id;
84 unsigned int prv_offset;
85 size_t prv_size_override;
86 const struct property_entry *properties;
87 void (*setup)(struct lpss_private_data *pdata);
88 bool resume_from_noirq;
89};
90
91static const struct lpss_device_desc lpss_dma_desc = {
92 .flags = LPSS_CLK,
93};
94
95struct lpss_private_data {
96 struct acpi_device *adev;
97 void __iomem *mmio_base;
98 resource_size_t mmio_size;
99 unsigned int fixed_clk_rate;
100 struct clk *clk;
101 const struct lpss_device_desc *dev_desc;
102 u32 prv_reg_ctx[LPSS_PRV_REG_COUNT];
103};
104
105/* Devices which need to be in D3 before lpss_iosf_enter_d3_state() proceeds */
106static u32 pmc_atom_d3_mask = 0xfe000ffe;
107
108/* LPSS run time quirks */
109static unsigned int lpss_quirks;
110
111/*
112 * LPSS_QUIRK_ALWAYS_POWER_ON: override power state for LPSS DMA device.
113 *
114 * The LPSS DMA controller has neither _PS0 nor _PS3 method. Moreover
115 * it can be powered off automatically whenever the last LPSS device goes down.
116 * In case of no power any access to the DMA controller will hang the system.
117 * The behaviour is reproduced on some HP laptops based on Intel BayTrail as
118 * well as on ASuS T100TA transformer.
119 *
120 * This quirk overrides power state of entire LPSS island to keep DMA powered
121 * on whenever we have at least one other device in use.
122 */
123#define LPSS_QUIRK_ALWAYS_POWER_ON BIT(0)
124
125/* UART Component Parameter Register */
126#define LPSS_UART_CPR 0xF4
127#define LPSS_UART_CPR_AFCE BIT(4)
128
129static void lpss_uart_setup(struct lpss_private_data *pdata)
130{
131 unsigned int offset;
132 u32 val;
133
134 offset = pdata->dev_desc->prv_offset + LPSS_TX_INT;
135 val = readl(pdata->mmio_base + offset);
136 writel(val | LPSS_TX_INT_MASK, pdata->mmio_base + offset);
137
138 val = readl(pdata->mmio_base + LPSS_UART_CPR);
139 if (!(val & LPSS_UART_CPR_AFCE)) {
140 offset = pdata->dev_desc->prv_offset + LPSS_GENERAL;
141 val = readl(pdata->mmio_base + offset);
142 val |= LPSS_GENERAL_UART_RTS_OVRD;
143 writel(val, pdata->mmio_base + offset);
144 }
145}
146
147static void lpss_deassert_reset(struct lpss_private_data *pdata)
148{
149 unsigned int offset;
150 u32 val;
151
152 offset = pdata->dev_desc->prv_offset + LPSS_RESETS;
153 val = readl(pdata->mmio_base + offset);
154 val |= LPSS_RESETS_RESET_APB | LPSS_RESETS_RESET_FUNC;
155 writel(val, pdata->mmio_base + offset);
156}
157
158/*
159 * BYT PWM used for backlight control by the i915 driver on systems without
160 * the Crystal Cove PMIC.
161 */
162static struct pwm_lookup byt_pwm_lookup[] = {
163 PWM_LOOKUP_WITH_MODULE("80860F09:00", 0, "0000:00:02.0",
164 "pwm_soc_backlight", 0, PWM_POLARITY_NORMAL,
165 "pwm-lpss-platform"),
166};
167
168static void byt_pwm_setup(struct lpss_private_data *pdata)
169{
170 /* Only call pwm_add_table for the first PWM controller */
171 if (acpi_dev_uid_match(pdata->adev, 1))
172 pwm_add_table(byt_pwm_lookup, ARRAY_SIZE(byt_pwm_lookup));
173}
174
175#define LPSS_I2C_ENABLE 0x6c
176
177static void byt_i2c_setup(struct lpss_private_data *pdata)
178{
179 acpi_handle handle = pdata->adev->handle;
180 unsigned long long shared_host = 0;
181 acpi_status status;
182 u64 uid;
183
184 /* Expected to always be successfull, but better safe then sorry */
185 if (!acpi_dev_uid_to_integer(pdata->adev, &uid) && uid) {
186 /* Detect I2C bus shared with PUNIT and ignore its d3 status */
187 status = acpi_evaluate_integer(handle, "_SEM", NULL, &shared_host);
188 if (ACPI_SUCCESS(status) && shared_host)
189 pmc_atom_d3_mask &= ~(BIT_LPSS2_F1_I2C1 << (uid - 1));
190 }
191
192 lpss_deassert_reset(pdata);
193
194 if (readl(pdata->mmio_base + pdata->dev_desc->prv_offset))
195 pdata->fixed_clk_rate = 133000000;
196
197 writel(0, pdata->mmio_base + LPSS_I2C_ENABLE);
198}
199
200/*
201 * BSW PWM1 is used for backlight control by the i915 driver
202 * BSW PWM2 is used for backlight control for fixed (etched into the glass)
203 * touch controls on some models. These touch-controls have specialized
204 * drivers which know they need the "pwm_soc_lpss_2" con-id.
205 */
206static struct pwm_lookup bsw_pwm_lookup[] = {
207 PWM_LOOKUP_WITH_MODULE("80862288:00", 0, "0000:00:02.0",
208 "pwm_soc_backlight", 0, PWM_POLARITY_NORMAL,
209 "pwm-lpss-platform"),
210 PWM_LOOKUP_WITH_MODULE("80862289:00", 0, NULL,
211 "pwm_soc_lpss_2", 0, PWM_POLARITY_NORMAL,
212 "pwm-lpss-platform"),
213};
214
215static void bsw_pwm_setup(struct lpss_private_data *pdata)
216{
217 /* Only call pwm_add_table for the first PWM controller */
218 if (acpi_dev_uid_match(pdata->adev, 1))
219 pwm_add_table(bsw_pwm_lookup, ARRAY_SIZE(bsw_pwm_lookup));
220}
221
222static const struct property_entry lpt_spi_properties[] = {
223 PROPERTY_ENTRY_U32("intel,spi-pxa2xx-type", LPSS_LPT_SSP),
224 { }
225};
226
227static const struct lpss_device_desc lpt_spi_dev_desc = {
228 .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_LTR
229 | LPSS_SAVE_CTX,
230 .prv_offset = 0x800,
231 .properties = lpt_spi_properties,
232};
233
234static const struct lpss_device_desc lpt_i2c_dev_desc = {
235 .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_LTR | LPSS_SAVE_CTX,
236 .prv_offset = 0x800,
237};
238
239static struct property_entry uart_properties[] = {
240 PROPERTY_ENTRY_U32("reg-io-width", 4),
241 PROPERTY_ENTRY_U32("reg-shift", 2),
242 PROPERTY_ENTRY_BOOL("snps,uart-16550-compatible"),
243 { },
244};
245
246static const struct lpss_device_desc lpt_uart_dev_desc = {
247 .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_LTR
248 | LPSS_SAVE_CTX,
249 .clk_con_id = "baudclk",
250 .prv_offset = 0x800,
251 .setup = lpss_uart_setup,
252 .properties = uart_properties,
253};
254
255static const struct lpss_device_desc lpt_sdio_dev_desc = {
256 .flags = LPSS_LTR,
257 .prv_offset = 0x1000,
258 .prv_size_override = 0x1018,
259};
260
261static const struct lpss_device_desc byt_pwm_dev_desc = {
262 .flags = LPSS_SAVE_CTX,
263 .prv_offset = 0x800,
264 .setup = byt_pwm_setup,
265};
266
267static const struct lpss_device_desc bsw_pwm_dev_desc = {
268 .flags = LPSS_SAVE_CTX_ONCE | LPSS_NO_D3_DELAY,
269 .prv_offset = 0x800,
270 .setup = bsw_pwm_setup,
271 .resume_from_noirq = true,
272};
273
274static const struct lpss_device_desc bsw_pwm2_dev_desc = {
275 .flags = LPSS_SAVE_CTX_ONCE | LPSS_NO_D3_DELAY,
276 .prv_offset = 0x800,
277 .resume_from_noirq = true,
278};
279
280static const struct lpss_device_desc byt_uart_dev_desc = {
281 .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_SAVE_CTX,
282 .clk_con_id = "baudclk",
283 .prv_offset = 0x800,
284 .setup = lpss_uart_setup,
285 .properties = uart_properties,
286};
287
288static const struct lpss_device_desc bsw_uart_dev_desc = {
289 .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_SAVE_CTX
290 | LPSS_NO_D3_DELAY,
291 .clk_con_id = "baudclk",
292 .prv_offset = 0x800,
293 .setup = lpss_uart_setup,
294 .properties = uart_properties,
295};
296
297static const struct property_entry byt_spi_properties[] = {
298 PROPERTY_ENTRY_U32("intel,spi-pxa2xx-type", LPSS_BYT_SSP),
299 { }
300};
301
302static const struct lpss_device_desc byt_spi_dev_desc = {
303 .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_SAVE_CTX,
304 .prv_offset = 0x400,
305 .properties = byt_spi_properties,
306};
307
308static const struct lpss_device_desc byt_sdio_dev_desc = {
309 .flags = LPSS_CLK,
310};
311
312static const struct lpss_device_desc byt_i2c_dev_desc = {
313 .flags = LPSS_CLK | LPSS_SAVE_CTX,
314 .prv_offset = 0x800,
315 .setup = byt_i2c_setup,
316 .resume_from_noirq = true,
317};
318
319static const struct lpss_device_desc bsw_i2c_dev_desc = {
320 .flags = LPSS_CLK | LPSS_SAVE_CTX | LPSS_NO_D3_DELAY,
321 .prv_offset = 0x800,
322 .setup = byt_i2c_setup,
323 .resume_from_noirq = true,
324};
325
326static const struct property_entry bsw_spi_properties[] = {
327 PROPERTY_ENTRY_U32("intel,spi-pxa2xx-type", LPSS_BSW_SSP),
328 { }
329};
330
331static const struct lpss_device_desc bsw_spi_dev_desc = {
332 .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_SAVE_CTX
333 | LPSS_NO_D3_DELAY,
334 .prv_offset = 0x400,
335 .setup = lpss_deassert_reset,
336 .properties = bsw_spi_properties,
337};
338
339static const struct x86_cpu_id lpss_cpu_ids[] = {
340 X86_MATCH_INTEL_FAM6_MODEL(ATOM_SILVERMONT, NULL),
341 X86_MATCH_INTEL_FAM6_MODEL(ATOM_AIRMONT, NULL),
342 {}
343};
344
345#else
346
347#define LPSS_ADDR(desc) (0UL)
348
349#endif /* CONFIG_X86_INTEL_LPSS */
350
351static const struct acpi_device_id acpi_lpss_device_ids[] = {
352 /* Generic LPSS devices */
353 { "INTL9C60", LPSS_ADDR(lpss_dma_desc) },
354
355 /* Lynxpoint LPSS devices */
356 { "INT33C0", LPSS_ADDR(lpt_spi_dev_desc) },
357 { "INT33C1", LPSS_ADDR(lpt_spi_dev_desc) },
358 { "INT33C2", LPSS_ADDR(lpt_i2c_dev_desc) },
359 { "INT33C3", LPSS_ADDR(lpt_i2c_dev_desc) },
360 { "INT33C4", LPSS_ADDR(lpt_uart_dev_desc) },
361 { "INT33C5", LPSS_ADDR(lpt_uart_dev_desc) },
362 { "INT33C6", LPSS_ADDR(lpt_sdio_dev_desc) },
363
364 /* BayTrail LPSS devices */
365 { "80860F09", LPSS_ADDR(byt_pwm_dev_desc) },
366 { "80860F0A", LPSS_ADDR(byt_uart_dev_desc) },
367 { "80860F0E", LPSS_ADDR(byt_spi_dev_desc) },
368 { "80860F14", LPSS_ADDR(byt_sdio_dev_desc) },
369 { "80860F41", LPSS_ADDR(byt_i2c_dev_desc) },
370
371 /* Braswell LPSS devices */
372 { "80862286", LPSS_ADDR(lpss_dma_desc) },
373 { "80862288", LPSS_ADDR(bsw_pwm_dev_desc) },
374 { "80862289", LPSS_ADDR(bsw_pwm2_dev_desc) },
375 { "8086228A", LPSS_ADDR(bsw_uart_dev_desc) },
376 { "8086228E", LPSS_ADDR(bsw_spi_dev_desc) },
377 { "808622C0", LPSS_ADDR(lpss_dma_desc) },
378 { "808622C1", LPSS_ADDR(bsw_i2c_dev_desc) },
379
380 /* Broadwell LPSS devices */
381 { "INT3430", LPSS_ADDR(lpt_spi_dev_desc) },
382 { "INT3431", LPSS_ADDR(lpt_spi_dev_desc) },
383 { "INT3432", LPSS_ADDR(lpt_i2c_dev_desc) },
384 { "INT3433", LPSS_ADDR(lpt_i2c_dev_desc) },
385 { "INT3434", LPSS_ADDR(lpt_uart_dev_desc) },
386 { "INT3435", LPSS_ADDR(lpt_uart_dev_desc) },
387 { "INT3436", LPSS_ADDR(lpt_sdio_dev_desc) },
388
389 /* Wildcat Point LPSS devices */
390 { "INT3438", LPSS_ADDR(lpt_spi_dev_desc) },
391
392 { }
393};
394
395#ifdef CONFIG_X86_INTEL_LPSS
396
397/* LPSS main clock device. */
398static struct platform_device *lpss_clk_dev;
399
400static inline void lpt_register_clock_device(void)
401{
402 lpss_clk_dev = platform_device_register_simple("clk-lpss-atom",
403 PLATFORM_DEVID_NONE,
404 NULL, 0);
405}
406
407static int register_device_clock(struct acpi_device *adev,
408 struct lpss_private_data *pdata)
409{
410 const struct lpss_device_desc *dev_desc = pdata->dev_desc;
411 const char *devname = dev_name(&adev->dev);
412 struct clk *clk;
413 struct lpss_clk_data *clk_data;
414 const char *parent, *clk_name;
415 void __iomem *prv_base;
416
417 if (!lpss_clk_dev)
418 lpt_register_clock_device();
419
420 if (IS_ERR(lpss_clk_dev))
421 return PTR_ERR(lpss_clk_dev);
422
423 clk_data = platform_get_drvdata(lpss_clk_dev);
424 if (!clk_data)
425 return -ENODEV;
426 clk = clk_data->clk;
427
428 if (!pdata->mmio_base
429 || pdata->mmio_size < dev_desc->prv_offset + LPSS_CLK_SIZE)
430 return -ENODATA;
431
432 parent = clk_data->name;
433 prv_base = pdata->mmio_base + dev_desc->prv_offset;
434
435 if (pdata->fixed_clk_rate) {
436 clk = clk_register_fixed_rate(NULL, devname, parent, 0,
437 pdata->fixed_clk_rate);
438 goto out;
439 }
440
441 if (dev_desc->flags & LPSS_CLK_GATE) {
442 clk = clk_register_gate(NULL, devname, parent, 0,
443 prv_base, 0, 0, NULL);
444 parent = devname;
445 }
446
447 if (dev_desc->flags & LPSS_CLK_DIVIDER) {
448 /* Prevent division by zero */
449 if (!readl(prv_base))
450 writel(LPSS_CLK_DIVIDER_DEF_MASK, prv_base);
451
452 clk_name = kasprintf(GFP_KERNEL, "%s-div", devname);
453 if (!clk_name)
454 return -ENOMEM;
455 clk = clk_register_fractional_divider(NULL, clk_name, parent,
456 0, prv_base, 1, 15, 16, 15,
457 CLK_FRAC_DIVIDER_POWER_OF_TWO_PS,
458 NULL);
459 parent = clk_name;
460
461 clk_name = kasprintf(GFP_KERNEL, "%s-update", devname);
462 if (!clk_name) {
463 kfree(parent);
464 return -ENOMEM;
465 }
466 clk = clk_register_gate(NULL, clk_name, parent,
467 CLK_SET_RATE_PARENT | CLK_SET_RATE_GATE,
468 prv_base, 31, 0, NULL);
469 kfree(parent);
470 kfree(clk_name);
471 }
472out:
473 if (IS_ERR(clk))
474 return PTR_ERR(clk);
475
476 pdata->clk = clk;
477 clk_register_clkdev(clk, dev_desc->clk_con_id, devname);
478 return 0;
479}
480
481struct lpss_device_links {
482 const char *supplier_hid;
483 const char *supplier_uid;
484 const char *consumer_hid;
485 const char *consumer_uid;
486 u32 flags;
487 const struct dmi_system_id *dep_missing_ids;
488};
489
490/* Please keep this list sorted alphabetically by vendor and model */
491static const struct dmi_system_id i2c1_dep_missing_dmi_ids[] = {
492 {
493 .matches = {
494 DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
495 DMI_MATCH(DMI_PRODUCT_NAME, "T200TA"),
496 },
497 },
498 {}
499};
500
501/*
502 * The _DEP method is used to identify dependencies but instead of creating
503 * device links for every handle in _DEP, only links in the following list are
504 * created. That is necessary because, in the general case, _DEP can refer to
505 * devices that might not have drivers, or that are on different buses, or where
506 * the supplier is not enumerated until after the consumer is probed.
507 */
508static const struct lpss_device_links lpss_device_links[] = {
509 /* CHT External sdcard slot controller depends on PMIC I2C ctrl */
510 {"808622C1", "7", "80860F14", "3", DL_FLAG_PM_RUNTIME},
511 /* CHT iGPU depends on PMIC I2C controller */
512 {"808622C1", "7", "LNXVIDEO", NULL, DL_FLAG_PM_RUNTIME},
513 /* BYT iGPU depends on the Embedded Controller I2C controller (UID 1) */
514 {"80860F41", "1", "LNXVIDEO", NULL, DL_FLAG_PM_RUNTIME,
515 i2c1_dep_missing_dmi_ids},
516 /* BYT CR iGPU depends on PMIC I2C controller (UID 5 on CR) */
517 {"80860F41", "5", "LNXVIDEO", NULL, DL_FLAG_PM_RUNTIME},
518 /* BYT iGPU depends on PMIC I2C controller (UID 7 on non CR) */
519 {"80860F41", "7", "LNXVIDEO", NULL, DL_FLAG_PM_RUNTIME},
520};
521
522static bool acpi_lpss_is_supplier(struct acpi_device *adev,
523 const struct lpss_device_links *link)
524{
525 return acpi_dev_hid_uid_match(adev, link->supplier_hid, link->supplier_uid);
526}
527
528static bool acpi_lpss_is_consumer(struct acpi_device *adev,
529 const struct lpss_device_links *link)
530{
531 return acpi_dev_hid_uid_match(adev, link->consumer_hid, link->consumer_uid);
532}
533
534struct hid_uid {
535 const char *hid;
536 const char *uid;
537};
538
539static int match_hid_uid(struct device *dev, const void *data)
540{
541 struct acpi_device *adev = ACPI_COMPANION(dev);
542 const struct hid_uid *id = data;
543
544 if (!adev)
545 return 0;
546
547 return acpi_dev_hid_uid_match(adev, id->hid, id->uid);
548}
549
550static struct device *acpi_lpss_find_device(const char *hid, const char *uid)
551{
552 struct device *dev;
553
554 struct hid_uid data = {
555 .hid = hid,
556 .uid = uid,
557 };
558
559 dev = bus_find_device(&platform_bus_type, NULL, &data, match_hid_uid);
560 if (dev)
561 return dev;
562
563 return bus_find_device(&pci_bus_type, NULL, &data, match_hid_uid);
564}
565
566static void acpi_lpss_link_consumer(struct device *dev1,
567 const struct lpss_device_links *link)
568{
569 struct device *dev2;
570
571 dev2 = acpi_lpss_find_device(link->consumer_hid, link->consumer_uid);
572 if (!dev2)
573 return;
574
575 if ((link->dep_missing_ids && dmi_check_system(link->dep_missing_ids))
576 || acpi_device_dep(ACPI_HANDLE(dev2), ACPI_HANDLE(dev1)))
577 device_link_add(dev2, dev1, link->flags);
578
579 put_device(dev2);
580}
581
582static void acpi_lpss_link_supplier(struct device *dev1,
583 const struct lpss_device_links *link)
584{
585 struct device *dev2;
586
587 dev2 = acpi_lpss_find_device(link->supplier_hid, link->supplier_uid);
588 if (!dev2)
589 return;
590
591 if ((link->dep_missing_ids && dmi_check_system(link->dep_missing_ids))
592 || acpi_device_dep(ACPI_HANDLE(dev1), ACPI_HANDLE(dev2)))
593 device_link_add(dev1, dev2, link->flags);
594
595 put_device(dev2);
596}
597
598static void acpi_lpss_create_device_links(struct acpi_device *adev,
599 struct platform_device *pdev)
600{
601 int i;
602
603 for (i = 0; i < ARRAY_SIZE(lpss_device_links); i++) {
604 const struct lpss_device_links *link = &lpss_device_links[i];
605
606 if (acpi_lpss_is_supplier(adev, link))
607 acpi_lpss_link_consumer(&pdev->dev, link);
608
609 if (acpi_lpss_is_consumer(adev, link))
610 acpi_lpss_link_supplier(&pdev->dev, link);
611 }
612}
613
614static int acpi_lpss_create_device(struct acpi_device *adev,
615 const struct acpi_device_id *id)
616{
617 const struct lpss_device_desc *dev_desc;
618 struct lpss_private_data *pdata;
619 struct resource_entry *rentry;
620 struct list_head resource_list;
621 struct platform_device *pdev;
622 int ret;
623
624 dev_desc = (const struct lpss_device_desc *)id->driver_data;
625 if (!dev_desc)
626 return -EINVAL;
627
628 pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
629 if (!pdata)
630 return -ENOMEM;
631
632 INIT_LIST_HEAD(&resource_list);
633 ret = acpi_dev_get_memory_resources(adev, &resource_list);
634 if (ret < 0)
635 goto err_out;
636
637 rentry = list_first_entry_or_null(&resource_list, struct resource_entry, node);
638 if (rentry) {
639 if (dev_desc->prv_size_override)
640 pdata->mmio_size = dev_desc->prv_size_override;
641 else
642 pdata->mmio_size = resource_size(rentry->res);
643 pdata->mmio_base = ioremap(rentry->res->start, pdata->mmio_size);
644 }
645
646 acpi_dev_free_resource_list(&resource_list);
647
648 if (!pdata->mmio_base) {
649 /* Avoid acpi_bus_attach() instantiating a pdev for this dev. */
650 adev->pnp.type.platform_id = 0;
651 goto out_free;
652 }
653
654 pdata->adev = adev;
655 pdata->dev_desc = dev_desc;
656
657 if (dev_desc->setup)
658 dev_desc->setup(pdata);
659
660 if (dev_desc->flags & LPSS_CLK) {
661 ret = register_device_clock(adev, pdata);
662 if (ret)
663 goto out_free;
664 }
665
666 /*
667 * This works around a known issue in ACPI tables where LPSS devices
668 * have _PS0 and _PS3 without _PSC (and no power resources), so
669 * acpi_bus_init_power() will assume that the BIOS has put them into D0.
670 */
671 acpi_device_fix_up_power(adev);
672
673 adev->driver_data = pdata;
674 pdev = acpi_create_platform_device(adev, dev_desc->properties);
675 if (IS_ERR_OR_NULL(pdev)) {
676 adev->driver_data = NULL;
677 ret = PTR_ERR(pdev);
678 goto err_out;
679 }
680
681 acpi_lpss_create_device_links(adev, pdev);
682 return 1;
683
684out_free:
685 /* Skip the device, but continue the namespace scan */
686 ret = 0;
687err_out:
688 kfree(pdata);
689 return ret;
690}
691
692static u32 __lpss_reg_read(struct lpss_private_data *pdata, unsigned int reg)
693{
694 return readl(pdata->mmio_base + pdata->dev_desc->prv_offset + reg);
695}
696
697static void __lpss_reg_write(u32 val, struct lpss_private_data *pdata,
698 unsigned int reg)
699{
700 writel(val, pdata->mmio_base + pdata->dev_desc->prv_offset + reg);
701}
702
703static int lpss_reg_read(struct device *dev, unsigned int reg, u32 *val)
704{
705 struct acpi_device *adev = ACPI_COMPANION(dev);
706 struct lpss_private_data *pdata;
707 unsigned long flags;
708 int ret;
709
710 if (WARN_ON(!adev))
711 return -ENODEV;
712
713 spin_lock_irqsave(&dev->power.lock, flags);
714 if (pm_runtime_suspended(dev)) {
715 ret = -EAGAIN;
716 goto out;
717 }
718 pdata = acpi_driver_data(adev);
719 if (WARN_ON(!pdata || !pdata->mmio_base)) {
720 ret = -ENODEV;
721 goto out;
722 }
723 *val = __lpss_reg_read(pdata, reg);
724 ret = 0;
725
726 out:
727 spin_unlock_irqrestore(&dev->power.lock, flags);
728 return ret;
729}
730
731static ssize_t lpss_ltr_show(struct device *dev, struct device_attribute *attr,
732 char *buf)
733{
734 u32 ltr_value = 0;
735 unsigned int reg;
736 int ret;
737
738 reg = strcmp(attr->attr.name, "auto_ltr") ? LPSS_SW_LTR : LPSS_AUTO_LTR;
739 ret = lpss_reg_read(dev, reg, <r_value);
740 if (ret)
741 return ret;
742
743 return sysfs_emit(buf, "%08x\n", ltr_value);
744}
745
746static ssize_t lpss_ltr_mode_show(struct device *dev,
747 struct device_attribute *attr, char *buf)
748{
749 u32 ltr_mode = 0;
750 char *outstr;
751 int ret;
752
753 ret = lpss_reg_read(dev, LPSS_GENERAL, <r_mode);
754 if (ret)
755 return ret;
756
757 outstr = (ltr_mode & LPSS_GENERAL_LTR_MODE_SW) ? "sw" : "auto";
758 return sprintf(buf, "%s\n", outstr);
759}
760
761static DEVICE_ATTR(auto_ltr, S_IRUSR, lpss_ltr_show, NULL);
762static DEVICE_ATTR(sw_ltr, S_IRUSR, lpss_ltr_show, NULL);
763static DEVICE_ATTR(ltr_mode, S_IRUSR, lpss_ltr_mode_show, NULL);
764
765static struct attribute *lpss_attrs[] = {
766 &dev_attr_auto_ltr.attr,
767 &dev_attr_sw_ltr.attr,
768 &dev_attr_ltr_mode.attr,
769 NULL,
770};
771
772static const struct attribute_group lpss_attr_group = {
773 .attrs = lpss_attrs,
774 .name = "lpss_ltr",
775};
776
777static void acpi_lpss_set_ltr(struct device *dev, s32 val)
778{
779 struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
780 u32 ltr_mode, ltr_val;
781
782 ltr_mode = __lpss_reg_read(pdata, LPSS_GENERAL);
783 if (val < 0) {
784 if (ltr_mode & LPSS_GENERAL_LTR_MODE_SW) {
785 ltr_mode &= ~LPSS_GENERAL_LTR_MODE_SW;
786 __lpss_reg_write(ltr_mode, pdata, LPSS_GENERAL);
787 }
788 return;
789 }
790 ltr_val = __lpss_reg_read(pdata, LPSS_SW_LTR) & ~LPSS_LTR_SNOOP_MASK;
791 if (val >= LPSS_LTR_SNOOP_LAT_CUTOFF) {
792 ltr_val |= LPSS_LTR_SNOOP_LAT_32US;
793 val = LPSS_LTR_MAX_VAL;
794 } else if (val > LPSS_LTR_MAX_VAL) {
795 ltr_val |= LPSS_LTR_SNOOP_LAT_32US | LPSS_LTR_SNOOP_REQ;
796 val >>= LPSS_LTR_SNOOP_LAT_SHIFT;
797 } else {
798 ltr_val |= LPSS_LTR_SNOOP_LAT_1US | LPSS_LTR_SNOOP_REQ;
799 }
800 ltr_val |= val;
801 __lpss_reg_write(ltr_val, pdata, LPSS_SW_LTR);
802 if (!(ltr_mode & LPSS_GENERAL_LTR_MODE_SW)) {
803 ltr_mode |= LPSS_GENERAL_LTR_MODE_SW;
804 __lpss_reg_write(ltr_mode, pdata, LPSS_GENERAL);
805 }
806}
807
808#ifdef CONFIG_PM
809/**
810 * acpi_lpss_save_ctx() - Save the private registers of LPSS device
811 * @dev: LPSS device
812 * @pdata: pointer to the private data of the LPSS device
813 *
814 * Most LPSS devices have private registers which may loose their context when
815 * the device is powered down. acpi_lpss_save_ctx() saves those registers into
816 * prv_reg_ctx array.
817 */
818static void acpi_lpss_save_ctx(struct device *dev,
819 struct lpss_private_data *pdata)
820{
821 unsigned int i;
822
823 for (i = 0; i < LPSS_PRV_REG_COUNT; i++) {
824 unsigned long offset = i * sizeof(u32);
825
826 pdata->prv_reg_ctx[i] = __lpss_reg_read(pdata, offset);
827 dev_dbg(dev, "saving 0x%08x from LPSS reg at offset 0x%02lx\n",
828 pdata->prv_reg_ctx[i], offset);
829 }
830}
831
832/**
833 * acpi_lpss_restore_ctx() - Restore the private registers of LPSS device
834 * @dev: LPSS device
835 * @pdata: pointer to the private data of the LPSS device
836 *
837 * Restores the registers that were previously stored with acpi_lpss_save_ctx().
838 */
839static void acpi_lpss_restore_ctx(struct device *dev,
840 struct lpss_private_data *pdata)
841{
842 unsigned int i;
843
844 for (i = 0; i < LPSS_PRV_REG_COUNT; i++) {
845 unsigned long offset = i * sizeof(u32);
846
847 __lpss_reg_write(pdata->prv_reg_ctx[i], pdata, offset);
848 dev_dbg(dev, "restoring 0x%08x to LPSS reg at offset 0x%02lx\n",
849 pdata->prv_reg_ctx[i], offset);
850 }
851}
852
853static void acpi_lpss_d3_to_d0_delay(struct lpss_private_data *pdata)
854{
855 /*
856 * The following delay is needed or the subsequent write operations may
857 * fail. The LPSS devices are actually PCI devices and the PCI spec
858 * expects 10ms delay before the device can be accessed after D3 to D0
859 * transition. However some platforms like BSW does not need this delay.
860 */
861 unsigned int delay = 10; /* default 10ms delay */
862
863 if (pdata->dev_desc->flags & LPSS_NO_D3_DELAY)
864 delay = 0;
865
866 msleep(delay);
867}
868
869static int acpi_lpss_activate(struct device *dev)
870{
871 struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
872 int ret;
873
874 ret = acpi_dev_resume(dev);
875 if (ret)
876 return ret;
877
878 acpi_lpss_d3_to_d0_delay(pdata);
879
880 /*
881 * This is called only on ->probe() stage where a device is either in
882 * known state defined by BIOS or most likely powered off. Due to this
883 * we have to deassert reset line to be sure that ->probe() will
884 * recognize the device.
885 */
886 if (pdata->dev_desc->flags & (LPSS_SAVE_CTX | LPSS_SAVE_CTX_ONCE))
887 lpss_deassert_reset(pdata);
888
889#ifdef CONFIG_PM
890 if (pdata->dev_desc->flags & LPSS_SAVE_CTX_ONCE)
891 acpi_lpss_save_ctx(dev, pdata);
892#endif
893
894 return 0;
895}
896
897static void acpi_lpss_dismiss(struct device *dev)
898{
899 acpi_dev_suspend(dev, false);
900}
901
902/* IOSF SB for LPSS island */
903#define LPSS_IOSF_UNIT_LPIOEP 0xA0
904#define LPSS_IOSF_UNIT_LPIO1 0xAB
905#define LPSS_IOSF_UNIT_LPIO2 0xAC
906
907#define LPSS_IOSF_PMCSR 0x84
908#define LPSS_PMCSR_D0 0
909#define LPSS_PMCSR_D3hot 3
910#define LPSS_PMCSR_Dx_MASK GENMASK(1, 0)
911
912#define LPSS_IOSF_GPIODEF0 0x154
913#define LPSS_GPIODEF0_DMA1_D3 BIT(2)
914#define LPSS_GPIODEF0_DMA2_D3 BIT(3)
915#define LPSS_GPIODEF0_DMA_D3_MASK GENMASK(3, 2)
916#define LPSS_GPIODEF0_DMA_LLP BIT(13)
917
918static DEFINE_MUTEX(lpss_iosf_mutex);
919static bool lpss_iosf_d3_entered = true;
920
921static void lpss_iosf_enter_d3_state(void)
922{
923 u32 value1 = 0;
924 u32 mask1 = LPSS_GPIODEF0_DMA_D3_MASK | LPSS_GPIODEF0_DMA_LLP;
925 u32 value2 = LPSS_PMCSR_D3hot;
926 u32 mask2 = LPSS_PMCSR_Dx_MASK;
927 /*
928 * PMC provides an information about actual status of the LPSS devices.
929 * Here we read the values related to LPSS power island, i.e. LPSS
930 * devices, excluding both LPSS DMA controllers, along with SCC domain.
931 */
932 u32 func_dis, d3_sts_0, pmc_status;
933 int ret;
934
935 ret = pmc_atom_read(PMC_FUNC_DIS, &func_dis);
936 if (ret)
937 return;
938
939 mutex_lock(&lpss_iosf_mutex);
940
941 ret = pmc_atom_read(PMC_D3_STS_0, &d3_sts_0);
942 if (ret)
943 goto exit;
944
945 /*
946 * Get the status of entire LPSS power island per device basis.
947 * Shutdown both LPSS DMA controllers if and only if all other devices
948 * are already in D3hot.
949 */
950 pmc_status = (~(d3_sts_0 | func_dis)) & pmc_atom_d3_mask;
951 if (pmc_status)
952 goto exit;
953
954 iosf_mbi_modify(LPSS_IOSF_UNIT_LPIO1, MBI_CFG_WRITE,
955 LPSS_IOSF_PMCSR, value2, mask2);
956
957 iosf_mbi_modify(LPSS_IOSF_UNIT_LPIO2, MBI_CFG_WRITE,
958 LPSS_IOSF_PMCSR, value2, mask2);
959
960 iosf_mbi_modify(LPSS_IOSF_UNIT_LPIOEP, MBI_CR_WRITE,
961 LPSS_IOSF_GPIODEF0, value1, mask1);
962
963 lpss_iosf_d3_entered = true;
964
965exit:
966 mutex_unlock(&lpss_iosf_mutex);
967}
968
969static void lpss_iosf_exit_d3_state(void)
970{
971 u32 value1 = LPSS_GPIODEF0_DMA1_D3 | LPSS_GPIODEF0_DMA2_D3 |
972 LPSS_GPIODEF0_DMA_LLP;
973 u32 mask1 = LPSS_GPIODEF0_DMA_D3_MASK | LPSS_GPIODEF0_DMA_LLP;
974 u32 value2 = LPSS_PMCSR_D0;
975 u32 mask2 = LPSS_PMCSR_Dx_MASK;
976
977 mutex_lock(&lpss_iosf_mutex);
978
979 if (!lpss_iosf_d3_entered)
980 goto exit;
981
982 lpss_iosf_d3_entered = false;
983
984 iosf_mbi_modify(LPSS_IOSF_UNIT_LPIOEP, MBI_CR_WRITE,
985 LPSS_IOSF_GPIODEF0, value1, mask1);
986
987 iosf_mbi_modify(LPSS_IOSF_UNIT_LPIO2, MBI_CFG_WRITE,
988 LPSS_IOSF_PMCSR, value2, mask2);
989
990 iosf_mbi_modify(LPSS_IOSF_UNIT_LPIO1, MBI_CFG_WRITE,
991 LPSS_IOSF_PMCSR, value2, mask2);
992
993exit:
994 mutex_unlock(&lpss_iosf_mutex);
995}
996
997static int acpi_lpss_suspend(struct device *dev, bool wakeup)
998{
999 struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
1000 int ret;
1001
1002 if (pdata->dev_desc->flags & LPSS_SAVE_CTX)
1003 acpi_lpss_save_ctx(dev, pdata);
1004
1005 ret = acpi_dev_suspend(dev, wakeup);
1006
1007 /*
1008 * This call must be last in the sequence, otherwise PMC will return
1009 * wrong status for devices being about to be powered off. See
1010 * lpss_iosf_enter_d3_state() for further information.
1011 */
1012 if (acpi_target_system_state() == ACPI_STATE_S0 &&
1013 lpss_quirks & LPSS_QUIRK_ALWAYS_POWER_ON && iosf_mbi_available())
1014 lpss_iosf_enter_d3_state();
1015
1016 return ret;
1017}
1018
1019static int acpi_lpss_resume(struct device *dev)
1020{
1021 struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
1022 int ret;
1023
1024 /*
1025 * This call is kept first to be in symmetry with
1026 * acpi_lpss_runtime_suspend() one.
1027 */
1028 if (lpss_quirks & LPSS_QUIRK_ALWAYS_POWER_ON && iosf_mbi_available())
1029 lpss_iosf_exit_d3_state();
1030
1031 ret = acpi_dev_resume(dev);
1032 if (ret)
1033 return ret;
1034
1035 acpi_lpss_d3_to_d0_delay(pdata);
1036
1037 if (pdata->dev_desc->flags & (LPSS_SAVE_CTX | LPSS_SAVE_CTX_ONCE))
1038 acpi_lpss_restore_ctx(dev, pdata);
1039
1040 return 0;
1041}
1042
1043#ifdef CONFIG_PM_SLEEP
1044static int acpi_lpss_do_suspend_late(struct device *dev)
1045{
1046 int ret;
1047
1048 if (dev_pm_skip_suspend(dev))
1049 return 0;
1050
1051 ret = pm_generic_suspend_late(dev);
1052 return ret ? ret : acpi_lpss_suspend(dev, device_may_wakeup(dev));
1053}
1054
1055static int acpi_lpss_suspend_late(struct device *dev)
1056{
1057 struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
1058
1059 if (pdata->dev_desc->resume_from_noirq)
1060 return 0;
1061
1062 return acpi_lpss_do_suspend_late(dev);
1063}
1064
1065static int acpi_lpss_suspend_noirq(struct device *dev)
1066{
1067 struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
1068 int ret;
1069
1070 if (pdata->dev_desc->resume_from_noirq) {
1071 /*
1072 * The driver's ->suspend_late callback will be invoked by
1073 * acpi_lpss_do_suspend_late(), with the assumption that the
1074 * driver really wanted to run that code in ->suspend_noirq, but
1075 * it could not run after acpi_dev_suspend() and the driver
1076 * expected the latter to be called in the "late" phase.
1077 */
1078 ret = acpi_lpss_do_suspend_late(dev);
1079 if (ret)
1080 return ret;
1081 }
1082
1083 return acpi_subsys_suspend_noirq(dev);
1084}
1085
1086static int acpi_lpss_do_resume_early(struct device *dev)
1087{
1088 int ret = acpi_lpss_resume(dev);
1089
1090 return ret ? ret : pm_generic_resume_early(dev);
1091}
1092
1093static int acpi_lpss_resume_early(struct device *dev)
1094{
1095 struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
1096
1097 if (pdata->dev_desc->resume_from_noirq)
1098 return 0;
1099
1100 if (dev_pm_skip_resume(dev))
1101 return 0;
1102
1103 return acpi_lpss_do_resume_early(dev);
1104}
1105
1106static int acpi_lpss_resume_noirq(struct device *dev)
1107{
1108 struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
1109 int ret;
1110
1111 /* Follow acpi_subsys_resume_noirq(). */
1112 if (dev_pm_skip_resume(dev))
1113 return 0;
1114
1115 ret = pm_generic_resume_noirq(dev);
1116 if (ret)
1117 return ret;
1118
1119 if (!pdata->dev_desc->resume_from_noirq)
1120 return 0;
1121
1122 /*
1123 * The driver's ->resume_early callback will be invoked by
1124 * acpi_lpss_do_resume_early(), with the assumption that the driver
1125 * really wanted to run that code in ->resume_noirq, but it could not
1126 * run before acpi_dev_resume() and the driver expected the latter to be
1127 * called in the "early" phase.
1128 */
1129 return acpi_lpss_do_resume_early(dev);
1130}
1131
1132static int acpi_lpss_do_restore_early(struct device *dev)
1133{
1134 int ret = acpi_lpss_resume(dev);
1135
1136 return ret ? ret : pm_generic_restore_early(dev);
1137}
1138
1139static int acpi_lpss_restore_early(struct device *dev)
1140{
1141 struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
1142
1143 if (pdata->dev_desc->resume_from_noirq)
1144 return 0;
1145
1146 return acpi_lpss_do_restore_early(dev);
1147}
1148
1149static int acpi_lpss_restore_noirq(struct device *dev)
1150{
1151 struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
1152 int ret;
1153
1154 ret = pm_generic_restore_noirq(dev);
1155 if (ret)
1156 return ret;
1157
1158 if (!pdata->dev_desc->resume_from_noirq)
1159 return 0;
1160
1161 /* This is analogous to what happens in acpi_lpss_resume_noirq(). */
1162 return acpi_lpss_do_restore_early(dev);
1163}
1164
1165static int acpi_lpss_do_poweroff_late(struct device *dev)
1166{
1167 int ret = pm_generic_poweroff_late(dev);
1168
1169 return ret ? ret : acpi_lpss_suspend(dev, device_may_wakeup(dev));
1170}
1171
1172static int acpi_lpss_poweroff_late(struct device *dev)
1173{
1174 struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
1175
1176 if (dev_pm_skip_suspend(dev))
1177 return 0;
1178
1179 if (pdata->dev_desc->resume_from_noirq)
1180 return 0;
1181
1182 return acpi_lpss_do_poweroff_late(dev);
1183}
1184
1185static int acpi_lpss_poweroff_noirq(struct device *dev)
1186{
1187 struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
1188
1189 if (dev_pm_skip_suspend(dev))
1190 return 0;
1191
1192 if (pdata->dev_desc->resume_from_noirq) {
1193 /* This is analogous to the acpi_lpss_suspend_noirq() case. */
1194 int ret = acpi_lpss_do_poweroff_late(dev);
1195
1196 if (ret)
1197 return ret;
1198 }
1199
1200 return pm_generic_poweroff_noirq(dev);
1201}
1202#endif /* CONFIG_PM_SLEEP */
1203
1204static int acpi_lpss_runtime_suspend(struct device *dev)
1205{
1206 int ret = pm_generic_runtime_suspend(dev);
1207
1208 return ret ? ret : acpi_lpss_suspend(dev, true);
1209}
1210
1211static int acpi_lpss_runtime_resume(struct device *dev)
1212{
1213 int ret = acpi_lpss_resume(dev);
1214
1215 return ret ? ret : pm_generic_runtime_resume(dev);
1216}
1217#endif /* CONFIG_PM */
1218
1219static struct dev_pm_domain acpi_lpss_pm_domain = {
1220#ifdef CONFIG_PM
1221 .activate = acpi_lpss_activate,
1222 .dismiss = acpi_lpss_dismiss,
1223#endif
1224 .ops = {
1225#ifdef CONFIG_PM
1226#ifdef CONFIG_PM_SLEEP
1227 .prepare = acpi_subsys_prepare,
1228 .complete = acpi_subsys_complete,
1229 .suspend = acpi_subsys_suspend,
1230 .suspend_late = acpi_lpss_suspend_late,
1231 .suspend_noirq = acpi_lpss_suspend_noirq,
1232 .resume_noirq = acpi_lpss_resume_noirq,
1233 .resume_early = acpi_lpss_resume_early,
1234 .freeze = acpi_subsys_freeze,
1235 .poweroff = acpi_subsys_poweroff,
1236 .poweroff_late = acpi_lpss_poweroff_late,
1237 .poweroff_noirq = acpi_lpss_poweroff_noirq,
1238 .restore_noirq = acpi_lpss_restore_noirq,
1239 .restore_early = acpi_lpss_restore_early,
1240#endif
1241 .runtime_suspend = acpi_lpss_runtime_suspend,
1242 .runtime_resume = acpi_lpss_runtime_resume,
1243#endif
1244 },
1245};
1246
1247static int acpi_lpss_platform_notify(struct notifier_block *nb,
1248 unsigned long action, void *data)
1249{
1250 struct platform_device *pdev = to_platform_device(data);
1251 struct lpss_private_data *pdata;
1252 struct acpi_device *adev;
1253 const struct acpi_device_id *id;
1254
1255 id = acpi_match_device(acpi_lpss_device_ids, &pdev->dev);
1256 if (!id || !id->driver_data)
1257 return 0;
1258
1259 adev = ACPI_COMPANION(&pdev->dev);
1260 if (!adev)
1261 return 0;
1262
1263 pdata = acpi_driver_data(adev);
1264 if (!pdata)
1265 return 0;
1266
1267 if (pdata->mmio_base &&
1268 pdata->mmio_size < pdata->dev_desc->prv_offset + LPSS_LTR_SIZE) {
1269 dev_err(&pdev->dev, "MMIO size insufficient to access LTR\n");
1270 return 0;
1271 }
1272
1273 switch (action) {
1274 case BUS_NOTIFY_BIND_DRIVER:
1275 dev_pm_domain_set(&pdev->dev, &acpi_lpss_pm_domain);
1276 break;
1277 case BUS_NOTIFY_DRIVER_NOT_BOUND:
1278 case BUS_NOTIFY_UNBOUND_DRIVER:
1279 dev_pm_domain_set(&pdev->dev, NULL);
1280 break;
1281 case BUS_NOTIFY_ADD_DEVICE:
1282 dev_pm_domain_set(&pdev->dev, &acpi_lpss_pm_domain);
1283 if (pdata->dev_desc->flags & LPSS_LTR)
1284 return sysfs_create_group(&pdev->dev.kobj,
1285 &lpss_attr_group);
1286 break;
1287 case BUS_NOTIFY_DEL_DEVICE:
1288 if (pdata->dev_desc->flags & LPSS_LTR)
1289 sysfs_remove_group(&pdev->dev.kobj, &lpss_attr_group);
1290 dev_pm_domain_set(&pdev->dev, NULL);
1291 break;
1292 default:
1293 break;
1294 }
1295
1296 return 0;
1297}
1298
1299static struct notifier_block acpi_lpss_nb = {
1300 .notifier_call = acpi_lpss_platform_notify,
1301};
1302
1303static void acpi_lpss_bind(struct device *dev)
1304{
1305 struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
1306
1307 if (!pdata || !pdata->mmio_base || !(pdata->dev_desc->flags & LPSS_LTR))
1308 return;
1309
1310 if (pdata->mmio_size >= pdata->dev_desc->prv_offset + LPSS_LTR_SIZE)
1311 dev->power.set_latency_tolerance = acpi_lpss_set_ltr;
1312 else
1313 dev_err(dev, "MMIO size insufficient to access LTR\n");
1314}
1315
1316static void acpi_lpss_unbind(struct device *dev)
1317{
1318 dev->power.set_latency_tolerance = NULL;
1319}
1320
1321static struct acpi_scan_handler lpss_handler = {
1322 .ids = acpi_lpss_device_ids,
1323 .attach = acpi_lpss_create_device,
1324 .bind = acpi_lpss_bind,
1325 .unbind = acpi_lpss_unbind,
1326};
1327
1328void __init acpi_lpss_init(void)
1329{
1330 const struct x86_cpu_id *id;
1331 int ret;
1332
1333 ret = lpss_atom_clk_init();
1334 if (ret)
1335 return;
1336
1337 id = x86_match_cpu(lpss_cpu_ids);
1338 if (id)
1339 lpss_quirks |= LPSS_QUIRK_ALWAYS_POWER_ON;
1340
1341 bus_register_notifier(&platform_bus_type, &acpi_lpss_nb);
1342 acpi_scan_add_handler(&lpss_handler);
1343}
1344
1345#else
1346
1347static struct acpi_scan_handler lpss_handler = {
1348 .ids = acpi_lpss_device_ids,
1349};
1350
1351void __init acpi_lpss_init(void)
1352{
1353 acpi_scan_add_handler(&lpss_handler);
1354}
1355
1356#endif /* CONFIG_X86_INTEL_LPSS */
1/*
2 * ACPI support for Intel Lynxpoint LPSS.
3 *
4 * Copyright (C) 2013, Intel Corporation
5 * Authors: Mika Westerberg <mika.westerberg@linux.intel.com>
6 * Rafael J. Wysocki <rafael.j.wysocki@intel.com>
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
11 */
12
13#include <linux/acpi.h>
14#include <linux/clkdev.h>
15#include <linux/clk-provider.h>
16#include <linux/err.h>
17#include <linux/io.h>
18#include <linux/mutex.h>
19#include <linux/platform_device.h>
20#include <linux/platform_data/clk-lpss.h>
21#include <linux/platform_data/x86/pmc_atom.h>
22#include <linux/pm_domain.h>
23#include <linux/pm_runtime.h>
24#include <linux/pwm.h>
25#include <linux/delay.h>
26
27#include "internal.h"
28
29ACPI_MODULE_NAME("acpi_lpss");
30
31#ifdef CONFIG_X86_INTEL_LPSS
32
33#include <asm/cpu_device_id.h>
34#include <asm/intel-family.h>
35#include <asm/iosf_mbi.h>
36
37#define LPSS_ADDR(desc) ((unsigned long)&desc)
38
39#define LPSS_CLK_SIZE 0x04
40#define LPSS_LTR_SIZE 0x18
41
42/* Offsets relative to LPSS_PRIVATE_OFFSET */
43#define LPSS_CLK_DIVIDER_DEF_MASK (BIT(1) | BIT(16))
44#define LPSS_RESETS 0x04
45#define LPSS_RESETS_RESET_FUNC BIT(0)
46#define LPSS_RESETS_RESET_APB BIT(1)
47#define LPSS_GENERAL 0x08
48#define LPSS_GENERAL_LTR_MODE_SW BIT(2)
49#define LPSS_GENERAL_UART_RTS_OVRD BIT(3)
50#define LPSS_SW_LTR 0x10
51#define LPSS_AUTO_LTR 0x14
52#define LPSS_LTR_SNOOP_REQ BIT(15)
53#define LPSS_LTR_SNOOP_MASK 0x0000FFFF
54#define LPSS_LTR_SNOOP_LAT_1US 0x800
55#define LPSS_LTR_SNOOP_LAT_32US 0xC00
56#define LPSS_LTR_SNOOP_LAT_SHIFT 5
57#define LPSS_LTR_SNOOP_LAT_CUTOFF 3000
58#define LPSS_LTR_MAX_VAL 0x3FF
59#define LPSS_TX_INT 0x20
60#define LPSS_TX_INT_MASK BIT(1)
61
62#define LPSS_PRV_REG_COUNT 9
63
64/* LPSS Flags */
65#define LPSS_CLK BIT(0)
66#define LPSS_CLK_GATE BIT(1)
67#define LPSS_CLK_DIVIDER BIT(2)
68#define LPSS_LTR BIT(3)
69#define LPSS_SAVE_CTX BIT(4)
70#define LPSS_NO_D3_DELAY BIT(5)
71
72struct lpss_private_data;
73
74struct lpss_device_desc {
75 unsigned int flags;
76 const char *clk_con_id;
77 unsigned int prv_offset;
78 size_t prv_size_override;
79 struct property_entry *properties;
80 void (*setup)(struct lpss_private_data *pdata);
81};
82
83static const struct lpss_device_desc lpss_dma_desc = {
84 .flags = LPSS_CLK,
85};
86
87struct lpss_private_data {
88 struct acpi_device *adev;
89 void __iomem *mmio_base;
90 resource_size_t mmio_size;
91 unsigned int fixed_clk_rate;
92 struct clk *clk;
93 const struct lpss_device_desc *dev_desc;
94 u32 prv_reg_ctx[LPSS_PRV_REG_COUNT];
95};
96
97/* LPSS run time quirks */
98static unsigned int lpss_quirks;
99
100/*
101 * LPSS_QUIRK_ALWAYS_POWER_ON: override power state for LPSS DMA device.
102 *
103 * The LPSS DMA controller has neither _PS0 nor _PS3 method. Moreover
104 * it can be powered off automatically whenever the last LPSS device goes down.
105 * In case of no power any access to the DMA controller will hang the system.
106 * The behaviour is reproduced on some HP laptops based on Intel BayTrail as
107 * well as on ASuS T100TA transformer.
108 *
109 * This quirk overrides power state of entire LPSS island to keep DMA powered
110 * on whenever we have at least one other device in use.
111 */
112#define LPSS_QUIRK_ALWAYS_POWER_ON BIT(0)
113
114/* UART Component Parameter Register */
115#define LPSS_UART_CPR 0xF4
116#define LPSS_UART_CPR_AFCE BIT(4)
117
118static void lpss_uart_setup(struct lpss_private_data *pdata)
119{
120 unsigned int offset;
121 u32 val;
122
123 offset = pdata->dev_desc->prv_offset + LPSS_TX_INT;
124 val = readl(pdata->mmio_base + offset);
125 writel(val | LPSS_TX_INT_MASK, pdata->mmio_base + offset);
126
127 val = readl(pdata->mmio_base + LPSS_UART_CPR);
128 if (!(val & LPSS_UART_CPR_AFCE)) {
129 offset = pdata->dev_desc->prv_offset + LPSS_GENERAL;
130 val = readl(pdata->mmio_base + offset);
131 val |= LPSS_GENERAL_UART_RTS_OVRD;
132 writel(val, pdata->mmio_base + offset);
133 }
134}
135
136static void lpss_deassert_reset(struct lpss_private_data *pdata)
137{
138 unsigned int offset;
139 u32 val;
140
141 offset = pdata->dev_desc->prv_offset + LPSS_RESETS;
142 val = readl(pdata->mmio_base + offset);
143 val |= LPSS_RESETS_RESET_APB | LPSS_RESETS_RESET_FUNC;
144 writel(val, pdata->mmio_base + offset);
145}
146
147/*
148 * BYT PWM used for backlight control by the i915 driver on systems without
149 * the Crystal Cove PMIC.
150 */
151static struct pwm_lookup byt_pwm_lookup[] = {
152 PWM_LOOKUP_WITH_MODULE("80860F09:00", 0, "0000:00:02.0",
153 "pwm_backlight", 0, PWM_POLARITY_NORMAL,
154 "pwm-lpss-platform"),
155};
156
157static void byt_pwm_setup(struct lpss_private_data *pdata)
158{
159 struct acpi_device *adev = pdata->adev;
160
161 /* Only call pwm_add_table for the first PWM controller */
162 if (!adev->pnp.unique_id || strcmp(adev->pnp.unique_id, "1"))
163 return;
164
165 if (!acpi_dev_present("INT33FD", NULL, -1))
166 pwm_add_table(byt_pwm_lookup, ARRAY_SIZE(byt_pwm_lookup));
167}
168
169#define LPSS_I2C_ENABLE 0x6c
170
171static void byt_i2c_setup(struct lpss_private_data *pdata)
172{
173 lpss_deassert_reset(pdata);
174
175 if (readl(pdata->mmio_base + pdata->dev_desc->prv_offset))
176 pdata->fixed_clk_rate = 133000000;
177
178 writel(0, pdata->mmio_base + LPSS_I2C_ENABLE);
179}
180
181/* BSW PWM used for backlight control by the i915 driver */
182static struct pwm_lookup bsw_pwm_lookup[] = {
183 PWM_LOOKUP_WITH_MODULE("80862288:00", 0, "0000:00:02.0",
184 "pwm_backlight", 0, PWM_POLARITY_NORMAL,
185 "pwm-lpss-platform"),
186};
187
188static void bsw_pwm_setup(struct lpss_private_data *pdata)
189{
190 struct acpi_device *adev = pdata->adev;
191
192 /* Only call pwm_add_table for the first PWM controller */
193 if (!adev->pnp.unique_id || strcmp(adev->pnp.unique_id, "1"))
194 return;
195
196 pwm_add_table(bsw_pwm_lookup, ARRAY_SIZE(bsw_pwm_lookup));
197}
198
199static const struct lpss_device_desc lpt_dev_desc = {
200 .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_LTR,
201 .prv_offset = 0x800,
202};
203
204static const struct lpss_device_desc lpt_i2c_dev_desc = {
205 .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_LTR,
206 .prv_offset = 0x800,
207};
208
209static struct property_entry uart_properties[] = {
210 PROPERTY_ENTRY_U32("reg-io-width", 4),
211 PROPERTY_ENTRY_U32("reg-shift", 2),
212 PROPERTY_ENTRY_BOOL("snps,uart-16550-compatible"),
213 { },
214};
215
216static const struct lpss_device_desc lpt_uart_dev_desc = {
217 .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_LTR,
218 .clk_con_id = "baudclk",
219 .prv_offset = 0x800,
220 .setup = lpss_uart_setup,
221 .properties = uart_properties,
222};
223
224static const struct lpss_device_desc lpt_sdio_dev_desc = {
225 .flags = LPSS_LTR,
226 .prv_offset = 0x1000,
227 .prv_size_override = 0x1018,
228};
229
230static const struct lpss_device_desc byt_pwm_dev_desc = {
231 .flags = LPSS_SAVE_CTX,
232 .setup = byt_pwm_setup,
233};
234
235static const struct lpss_device_desc bsw_pwm_dev_desc = {
236 .flags = LPSS_SAVE_CTX | LPSS_NO_D3_DELAY,
237 .setup = bsw_pwm_setup,
238};
239
240static const struct lpss_device_desc byt_uart_dev_desc = {
241 .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_SAVE_CTX,
242 .clk_con_id = "baudclk",
243 .prv_offset = 0x800,
244 .setup = lpss_uart_setup,
245 .properties = uart_properties,
246};
247
248static const struct lpss_device_desc bsw_uart_dev_desc = {
249 .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_SAVE_CTX
250 | LPSS_NO_D3_DELAY,
251 .clk_con_id = "baudclk",
252 .prv_offset = 0x800,
253 .setup = lpss_uart_setup,
254 .properties = uart_properties,
255};
256
257static const struct lpss_device_desc byt_spi_dev_desc = {
258 .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_SAVE_CTX,
259 .prv_offset = 0x400,
260};
261
262static const struct lpss_device_desc byt_sdio_dev_desc = {
263 .flags = LPSS_CLK,
264};
265
266static const struct lpss_device_desc byt_i2c_dev_desc = {
267 .flags = LPSS_CLK | LPSS_SAVE_CTX,
268 .prv_offset = 0x800,
269 .setup = byt_i2c_setup,
270};
271
272static const struct lpss_device_desc bsw_i2c_dev_desc = {
273 .flags = LPSS_CLK | LPSS_SAVE_CTX | LPSS_NO_D3_DELAY,
274 .prv_offset = 0x800,
275 .setup = byt_i2c_setup,
276};
277
278static const struct lpss_device_desc bsw_spi_dev_desc = {
279 .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_SAVE_CTX
280 | LPSS_NO_D3_DELAY,
281 .prv_offset = 0x400,
282 .setup = lpss_deassert_reset,
283};
284
285#define ICPU(model) { X86_VENDOR_INTEL, 6, model, X86_FEATURE_ANY, }
286
287static const struct x86_cpu_id lpss_cpu_ids[] = {
288 ICPU(INTEL_FAM6_ATOM_SILVERMONT1), /* Valleyview, Bay Trail */
289 ICPU(INTEL_FAM6_ATOM_AIRMONT), /* Braswell, Cherry Trail */
290 {}
291};
292
293#else
294
295#define LPSS_ADDR(desc) (0UL)
296
297#endif /* CONFIG_X86_INTEL_LPSS */
298
299static const struct acpi_device_id acpi_lpss_device_ids[] = {
300 /* Generic LPSS devices */
301 { "INTL9C60", LPSS_ADDR(lpss_dma_desc) },
302
303 /* Lynxpoint LPSS devices */
304 { "INT33C0", LPSS_ADDR(lpt_dev_desc) },
305 { "INT33C1", LPSS_ADDR(lpt_dev_desc) },
306 { "INT33C2", LPSS_ADDR(lpt_i2c_dev_desc) },
307 { "INT33C3", LPSS_ADDR(lpt_i2c_dev_desc) },
308 { "INT33C4", LPSS_ADDR(lpt_uart_dev_desc) },
309 { "INT33C5", LPSS_ADDR(lpt_uart_dev_desc) },
310 { "INT33C6", LPSS_ADDR(lpt_sdio_dev_desc) },
311 { "INT33C7", },
312
313 /* BayTrail LPSS devices */
314 { "80860F09", LPSS_ADDR(byt_pwm_dev_desc) },
315 { "80860F0A", LPSS_ADDR(byt_uart_dev_desc) },
316 { "80860F0E", LPSS_ADDR(byt_spi_dev_desc) },
317 { "80860F14", LPSS_ADDR(byt_sdio_dev_desc) },
318 { "80860F41", LPSS_ADDR(byt_i2c_dev_desc) },
319 { "INT33B2", },
320 { "INT33FC", },
321
322 /* Braswell LPSS devices */
323 { "80862288", LPSS_ADDR(bsw_pwm_dev_desc) },
324 { "8086228A", LPSS_ADDR(bsw_uart_dev_desc) },
325 { "8086228E", LPSS_ADDR(bsw_spi_dev_desc) },
326 { "808622C1", LPSS_ADDR(bsw_i2c_dev_desc) },
327
328 /* Broadwell LPSS devices */
329 { "INT3430", LPSS_ADDR(lpt_dev_desc) },
330 { "INT3431", LPSS_ADDR(lpt_dev_desc) },
331 { "INT3432", LPSS_ADDR(lpt_i2c_dev_desc) },
332 { "INT3433", LPSS_ADDR(lpt_i2c_dev_desc) },
333 { "INT3434", LPSS_ADDR(lpt_uart_dev_desc) },
334 { "INT3435", LPSS_ADDR(lpt_uart_dev_desc) },
335 { "INT3436", LPSS_ADDR(lpt_sdio_dev_desc) },
336 { "INT3437", },
337
338 /* Wildcat Point LPSS devices */
339 { "INT3438", LPSS_ADDR(lpt_dev_desc) },
340
341 { }
342};
343
344#ifdef CONFIG_X86_INTEL_LPSS
345
346static int is_memory(struct acpi_resource *res, void *not_used)
347{
348 struct resource r;
349 return !acpi_dev_resource_memory(res, &r);
350}
351
352/* LPSS main clock device. */
353static struct platform_device *lpss_clk_dev;
354
355static inline void lpt_register_clock_device(void)
356{
357 lpss_clk_dev = platform_device_register_simple("clk-lpt", -1, NULL, 0);
358}
359
360static int register_device_clock(struct acpi_device *adev,
361 struct lpss_private_data *pdata)
362{
363 const struct lpss_device_desc *dev_desc = pdata->dev_desc;
364 const char *devname = dev_name(&adev->dev);
365 struct clk *clk;
366 struct lpss_clk_data *clk_data;
367 const char *parent, *clk_name;
368 void __iomem *prv_base;
369
370 if (!lpss_clk_dev)
371 lpt_register_clock_device();
372
373 clk_data = platform_get_drvdata(lpss_clk_dev);
374 if (!clk_data)
375 return -ENODEV;
376 clk = clk_data->clk;
377
378 if (!pdata->mmio_base
379 || pdata->mmio_size < dev_desc->prv_offset + LPSS_CLK_SIZE)
380 return -ENODATA;
381
382 parent = clk_data->name;
383 prv_base = pdata->mmio_base + dev_desc->prv_offset;
384
385 if (pdata->fixed_clk_rate) {
386 clk = clk_register_fixed_rate(NULL, devname, parent, 0,
387 pdata->fixed_clk_rate);
388 goto out;
389 }
390
391 if (dev_desc->flags & LPSS_CLK_GATE) {
392 clk = clk_register_gate(NULL, devname, parent, 0,
393 prv_base, 0, 0, NULL);
394 parent = devname;
395 }
396
397 if (dev_desc->flags & LPSS_CLK_DIVIDER) {
398 /* Prevent division by zero */
399 if (!readl(prv_base))
400 writel(LPSS_CLK_DIVIDER_DEF_MASK, prv_base);
401
402 clk_name = kasprintf(GFP_KERNEL, "%s-div", devname);
403 if (!clk_name)
404 return -ENOMEM;
405 clk = clk_register_fractional_divider(NULL, clk_name, parent,
406 0, prv_base,
407 1, 15, 16, 15, 0, NULL);
408 parent = clk_name;
409
410 clk_name = kasprintf(GFP_KERNEL, "%s-update", devname);
411 if (!clk_name) {
412 kfree(parent);
413 return -ENOMEM;
414 }
415 clk = clk_register_gate(NULL, clk_name, parent,
416 CLK_SET_RATE_PARENT | CLK_SET_RATE_GATE,
417 prv_base, 31, 0, NULL);
418 kfree(parent);
419 kfree(clk_name);
420 }
421out:
422 if (IS_ERR(clk))
423 return PTR_ERR(clk);
424
425 pdata->clk = clk;
426 clk_register_clkdev(clk, dev_desc->clk_con_id, devname);
427 return 0;
428}
429
430struct lpss_device_links {
431 const char *supplier_hid;
432 const char *supplier_uid;
433 const char *consumer_hid;
434 const char *consumer_uid;
435 u32 flags;
436};
437
438/*
439 * The _DEP method is used to identify dependencies but instead of creating
440 * device links for every handle in _DEP, only links in the following list are
441 * created. That is necessary because, in the general case, _DEP can refer to
442 * devices that might not have drivers, or that are on different buses, or where
443 * the supplier is not enumerated until after the consumer is probed.
444 */
445static const struct lpss_device_links lpss_device_links[] = {
446 {"808622C1", "7", "80860F14", "3", DL_FLAG_PM_RUNTIME},
447};
448
449static bool hid_uid_match(const char *hid1, const char *uid1,
450 const char *hid2, const char *uid2)
451{
452 return !strcmp(hid1, hid2) && uid1 && uid2 && !strcmp(uid1, uid2);
453}
454
455static bool acpi_lpss_is_supplier(struct acpi_device *adev,
456 const struct lpss_device_links *link)
457{
458 return hid_uid_match(acpi_device_hid(adev), acpi_device_uid(adev),
459 link->supplier_hid, link->supplier_uid);
460}
461
462static bool acpi_lpss_is_consumer(struct acpi_device *adev,
463 const struct lpss_device_links *link)
464{
465 return hid_uid_match(acpi_device_hid(adev), acpi_device_uid(adev),
466 link->consumer_hid, link->consumer_uid);
467}
468
469struct hid_uid {
470 const char *hid;
471 const char *uid;
472};
473
474static int match_hid_uid(struct device *dev, void *data)
475{
476 struct acpi_device *adev = ACPI_COMPANION(dev);
477 struct hid_uid *id = data;
478
479 if (!adev)
480 return 0;
481
482 return hid_uid_match(acpi_device_hid(adev), acpi_device_uid(adev),
483 id->hid, id->uid);
484}
485
486static struct device *acpi_lpss_find_device(const char *hid, const char *uid)
487{
488 struct hid_uid data = {
489 .hid = hid,
490 .uid = uid,
491 };
492
493 return bus_find_device(&platform_bus_type, NULL, &data, match_hid_uid);
494}
495
496static bool acpi_lpss_dep(struct acpi_device *adev, acpi_handle handle)
497{
498 struct acpi_handle_list dep_devices;
499 acpi_status status;
500 int i;
501
502 if (!acpi_has_method(adev->handle, "_DEP"))
503 return false;
504
505 status = acpi_evaluate_reference(adev->handle, "_DEP", NULL,
506 &dep_devices);
507 if (ACPI_FAILURE(status)) {
508 dev_dbg(&adev->dev, "Failed to evaluate _DEP.\n");
509 return false;
510 }
511
512 for (i = 0; i < dep_devices.count; i++) {
513 if (dep_devices.handles[i] == handle)
514 return true;
515 }
516
517 return false;
518}
519
520static void acpi_lpss_link_consumer(struct device *dev1,
521 const struct lpss_device_links *link)
522{
523 struct device *dev2;
524
525 dev2 = acpi_lpss_find_device(link->consumer_hid, link->consumer_uid);
526 if (!dev2)
527 return;
528
529 if (acpi_lpss_dep(ACPI_COMPANION(dev2), ACPI_HANDLE(dev1)))
530 device_link_add(dev2, dev1, link->flags);
531
532 put_device(dev2);
533}
534
535static void acpi_lpss_link_supplier(struct device *dev1,
536 const struct lpss_device_links *link)
537{
538 struct device *dev2;
539
540 dev2 = acpi_lpss_find_device(link->supplier_hid, link->supplier_uid);
541 if (!dev2)
542 return;
543
544 if (acpi_lpss_dep(ACPI_COMPANION(dev1), ACPI_HANDLE(dev2)))
545 device_link_add(dev1, dev2, link->flags);
546
547 put_device(dev2);
548}
549
550static void acpi_lpss_create_device_links(struct acpi_device *adev,
551 struct platform_device *pdev)
552{
553 int i;
554
555 for (i = 0; i < ARRAY_SIZE(lpss_device_links); i++) {
556 const struct lpss_device_links *link = &lpss_device_links[i];
557
558 if (acpi_lpss_is_supplier(adev, link))
559 acpi_lpss_link_consumer(&pdev->dev, link);
560
561 if (acpi_lpss_is_consumer(adev, link))
562 acpi_lpss_link_supplier(&pdev->dev, link);
563 }
564}
565
566static int acpi_lpss_create_device(struct acpi_device *adev,
567 const struct acpi_device_id *id)
568{
569 const struct lpss_device_desc *dev_desc;
570 struct lpss_private_data *pdata;
571 struct resource_entry *rentry;
572 struct list_head resource_list;
573 struct platform_device *pdev;
574 int ret;
575
576 dev_desc = (const struct lpss_device_desc *)id->driver_data;
577 if (!dev_desc) {
578 pdev = acpi_create_platform_device(adev, NULL);
579 return IS_ERR_OR_NULL(pdev) ? PTR_ERR(pdev) : 1;
580 }
581 pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
582 if (!pdata)
583 return -ENOMEM;
584
585 INIT_LIST_HEAD(&resource_list);
586 ret = acpi_dev_get_resources(adev, &resource_list, is_memory, NULL);
587 if (ret < 0)
588 goto err_out;
589
590 list_for_each_entry(rentry, &resource_list, node)
591 if (resource_type(rentry->res) == IORESOURCE_MEM) {
592 if (dev_desc->prv_size_override)
593 pdata->mmio_size = dev_desc->prv_size_override;
594 else
595 pdata->mmio_size = resource_size(rentry->res);
596 pdata->mmio_base = ioremap(rentry->res->start,
597 pdata->mmio_size);
598 break;
599 }
600
601 acpi_dev_free_resource_list(&resource_list);
602
603 if (!pdata->mmio_base) {
604 /* Avoid acpi_bus_attach() instantiating a pdev for this dev. */
605 adev->pnp.type.platform_id = 0;
606 /* Skip the device, but continue the namespace scan. */
607 ret = 0;
608 goto err_out;
609 }
610
611 pdata->adev = adev;
612 pdata->dev_desc = dev_desc;
613
614 if (dev_desc->setup)
615 dev_desc->setup(pdata);
616
617 if (dev_desc->flags & LPSS_CLK) {
618 ret = register_device_clock(adev, pdata);
619 if (ret) {
620 /* Skip the device, but continue the namespace scan. */
621 ret = 0;
622 goto err_out;
623 }
624 }
625
626 /*
627 * This works around a known issue in ACPI tables where LPSS devices
628 * have _PS0 and _PS3 without _PSC (and no power resources), so
629 * acpi_bus_init_power() will assume that the BIOS has put them into D0.
630 */
631 ret = acpi_device_fix_up_power(adev);
632 if (ret) {
633 /* Skip the device, but continue the namespace scan. */
634 ret = 0;
635 goto err_out;
636 }
637
638 adev->driver_data = pdata;
639 pdev = acpi_create_platform_device(adev, dev_desc->properties);
640 if (!IS_ERR_OR_NULL(pdev)) {
641 acpi_lpss_create_device_links(adev, pdev);
642 return 1;
643 }
644
645 ret = PTR_ERR(pdev);
646 adev->driver_data = NULL;
647
648 err_out:
649 kfree(pdata);
650 return ret;
651}
652
653static u32 __lpss_reg_read(struct lpss_private_data *pdata, unsigned int reg)
654{
655 return readl(pdata->mmio_base + pdata->dev_desc->prv_offset + reg);
656}
657
658static void __lpss_reg_write(u32 val, struct lpss_private_data *pdata,
659 unsigned int reg)
660{
661 writel(val, pdata->mmio_base + pdata->dev_desc->prv_offset + reg);
662}
663
664static int lpss_reg_read(struct device *dev, unsigned int reg, u32 *val)
665{
666 struct acpi_device *adev;
667 struct lpss_private_data *pdata;
668 unsigned long flags;
669 int ret;
670
671 ret = acpi_bus_get_device(ACPI_HANDLE(dev), &adev);
672 if (WARN_ON(ret))
673 return ret;
674
675 spin_lock_irqsave(&dev->power.lock, flags);
676 if (pm_runtime_suspended(dev)) {
677 ret = -EAGAIN;
678 goto out;
679 }
680 pdata = acpi_driver_data(adev);
681 if (WARN_ON(!pdata || !pdata->mmio_base)) {
682 ret = -ENODEV;
683 goto out;
684 }
685 *val = __lpss_reg_read(pdata, reg);
686
687 out:
688 spin_unlock_irqrestore(&dev->power.lock, flags);
689 return ret;
690}
691
692static ssize_t lpss_ltr_show(struct device *dev, struct device_attribute *attr,
693 char *buf)
694{
695 u32 ltr_value = 0;
696 unsigned int reg;
697 int ret;
698
699 reg = strcmp(attr->attr.name, "auto_ltr") ? LPSS_SW_LTR : LPSS_AUTO_LTR;
700 ret = lpss_reg_read(dev, reg, <r_value);
701 if (ret)
702 return ret;
703
704 return snprintf(buf, PAGE_SIZE, "%08x\n", ltr_value);
705}
706
707static ssize_t lpss_ltr_mode_show(struct device *dev,
708 struct device_attribute *attr, char *buf)
709{
710 u32 ltr_mode = 0;
711 char *outstr;
712 int ret;
713
714 ret = lpss_reg_read(dev, LPSS_GENERAL, <r_mode);
715 if (ret)
716 return ret;
717
718 outstr = (ltr_mode & LPSS_GENERAL_LTR_MODE_SW) ? "sw" : "auto";
719 return sprintf(buf, "%s\n", outstr);
720}
721
722static DEVICE_ATTR(auto_ltr, S_IRUSR, lpss_ltr_show, NULL);
723static DEVICE_ATTR(sw_ltr, S_IRUSR, lpss_ltr_show, NULL);
724static DEVICE_ATTR(ltr_mode, S_IRUSR, lpss_ltr_mode_show, NULL);
725
726static struct attribute *lpss_attrs[] = {
727 &dev_attr_auto_ltr.attr,
728 &dev_attr_sw_ltr.attr,
729 &dev_attr_ltr_mode.attr,
730 NULL,
731};
732
733static const struct attribute_group lpss_attr_group = {
734 .attrs = lpss_attrs,
735 .name = "lpss_ltr",
736};
737
738static void acpi_lpss_set_ltr(struct device *dev, s32 val)
739{
740 struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
741 u32 ltr_mode, ltr_val;
742
743 ltr_mode = __lpss_reg_read(pdata, LPSS_GENERAL);
744 if (val < 0) {
745 if (ltr_mode & LPSS_GENERAL_LTR_MODE_SW) {
746 ltr_mode &= ~LPSS_GENERAL_LTR_MODE_SW;
747 __lpss_reg_write(ltr_mode, pdata, LPSS_GENERAL);
748 }
749 return;
750 }
751 ltr_val = __lpss_reg_read(pdata, LPSS_SW_LTR) & ~LPSS_LTR_SNOOP_MASK;
752 if (val >= LPSS_LTR_SNOOP_LAT_CUTOFF) {
753 ltr_val |= LPSS_LTR_SNOOP_LAT_32US;
754 val = LPSS_LTR_MAX_VAL;
755 } else if (val > LPSS_LTR_MAX_VAL) {
756 ltr_val |= LPSS_LTR_SNOOP_LAT_32US | LPSS_LTR_SNOOP_REQ;
757 val >>= LPSS_LTR_SNOOP_LAT_SHIFT;
758 } else {
759 ltr_val |= LPSS_LTR_SNOOP_LAT_1US | LPSS_LTR_SNOOP_REQ;
760 }
761 ltr_val |= val;
762 __lpss_reg_write(ltr_val, pdata, LPSS_SW_LTR);
763 if (!(ltr_mode & LPSS_GENERAL_LTR_MODE_SW)) {
764 ltr_mode |= LPSS_GENERAL_LTR_MODE_SW;
765 __lpss_reg_write(ltr_mode, pdata, LPSS_GENERAL);
766 }
767}
768
769#ifdef CONFIG_PM
770/**
771 * acpi_lpss_save_ctx() - Save the private registers of LPSS device
772 * @dev: LPSS device
773 * @pdata: pointer to the private data of the LPSS device
774 *
775 * Most LPSS devices have private registers which may loose their context when
776 * the device is powered down. acpi_lpss_save_ctx() saves those registers into
777 * prv_reg_ctx array.
778 */
779static void acpi_lpss_save_ctx(struct device *dev,
780 struct lpss_private_data *pdata)
781{
782 unsigned int i;
783
784 for (i = 0; i < LPSS_PRV_REG_COUNT; i++) {
785 unsigned long offset = i * sizeof(u32);
786
787 pdata->prv_reg_ctx[i] = __lpss_reg_read(pdata, offset);
788 dev_dbg(dev, "saving 0x%08x from LPSS reg at offset 0x%02lx\n",
789 pdata->prv_reg_ctx[i], offset);
790 }
791}
792
793/**
794 * acpi_lpss_restore_ctx() - Restore the private registers of LPSS device
795 * @dev: LPSS device
796 * @pdata: pointer to the private data of the LPSS device
797 *
798 * Restores the registers that were previously stored with acpi_lpss_save_ctx().
799 */
800static void acpi_lpss_restore_ctx(struct device *dev,
801 struct lpss_private_data *pdata)
802{
803 unsigned int i;
804
805 for (i = 0; i < LPSS_PRV_REG_COUNT; i++) {
806 unsigned long offset = i * sizeof(u32);
807
808 __lpss_reg_write(pdata->prv_reg_ctx[i], pdata, offset);
809 dev_dbg(dev, "restoring 0x%08x to LPSS reg at offset 0x%02lx\n",
810 pdata->prv_reg_ctx[i], offset);
811 }
812}
813
814static void acpi_lpss_d3_to_d0_delay(struct lpss_private_data *pdata)
815{
816 /*
817 * The following delay is needed or the subsequent write operations may
818 * fail. The LPSS devices are actually PCI devices and the PCI spec
819 * expects 10ms delay before the device can be accessed after D3 to D0
820 * transition. However some platforms like BSW does not need this delay.
821 */
822 unsigned int delay = 10; /* default 10ms delay */
823
824 if (pdata->dev_desc->flags & LPSS_NO_D3_DELAY)
825 delay = 0;
826
827 msleep(delay);
828}
829
830static int acpi_lpss_activate(struct device *dev)
831{
832 struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
833 int ret;
834
835 ret = acpi_dev_resume(dev);
836 if (ret)
837 return ret;
838
839 acpi_lpss_d3_to_d0_delay(pdata);
840
841 /*
842 * This is called only on ->probe() stage where a device is either in
843 * known state defined by BIOS or most likely powered off. Due to this
844 * we have to deassert reset line to be sure that ->probe() will
845 * recognize the device.
846 */
847 if (pdata->dev_desc->flags & LPSS_SAVE_CTX)
848 lpss_deassert_reset(pdata);
849
850 return 0;
851}
852
853static void acpi_lpss_dismiss(struct device *dev)
854{
855 acpi_dev_suspend(dev, false);
856}
857
858/* IOSF SB for LPSS island */
859#define LPSS_IOSF_UNIT_LPIOEP 0xA0
860#define LPSS_IOSF_UNIT_LPIO1 0xAB
861#define LPSS_IOSF_UNIT_LPIO2 0xAC
862
863#define LPSS_IOSF_PMCSR 0x84
864#define LPSS_PMCSR_D0 0
865#define LPSS_PMCSR_D3hot 3
866#define LPSS_PMCSR_Dx_MASK GENMASK(1, 0)
867
868#define LPSS_IOSF_GPIODEF0 0x154
869#define LPSS_GPIODEF0_DMA1_D3 BIT(2)
870#define LPSS_GPIODEF0_DMA2_D3 BIT(3)
871#define LPSS_GPIODEF0_DMA_D3_MASK GENMASK(3, 2)
872#define LPSS_GPIODEF0_DMA_LLP BIT(13)
873
874static DEFINE_MUTEX(lpss_iosf_mutex);
875
876static void lpss_iosf_enter_d3_state(void)
877{
878 u32 value1 = 0;
879 u32 mask1 = LPSS_GPIODEF0_DMA_D3_MASK | LPSS_GPIODEF0_DMA_LLP;
880 u32 value2 = LPSS_PMCSR_D3hot;
881 u32 mask2 = LPSS_PMCSR_Dx_MASK;
882 /*
883 * PMC provides an information about actual status of the LPSS devices.
884 * Here we read the values related to LPSS power island, i.e. LPSS
885 * devices, excluding both LPSS DMA controllers, along with SCC domain.
886 */
887 u32 func_dis, d3_sts_0, pmc_status, pmc_mask = 0xfe000ffe;
888 int ret;
889
890 ret = pmc_atom_read(PMC_FUNC_DIS, &func_dis);
891 if (ret)
892 return;
893
894 mutex_lock(&lpss_iosf_mutex);
895
896 ret = pmc_atom_read(PMC_D3_STS_0, &d3_sts_0);
897 if (ret)
898 goto exit;
899
900 /*
901 * Get the status of entire LPSS power island per device basis.
902 * Shutdown both LPSS DMA controllers if and only if all other devices
903 * are already in D3hot.
904 */
905 pmc_status = (~(d3_sts_0 | func_dis)) & pmc_mask;
906 if (pmc_status)
907 goto exit;
908
909 iosf_mbi_modify(LPSS_IOSF_UNIT_LPIO1, MBI_CFG_WRITE,
910 LPSS_IOSF_PMCSR, value2, mask2);
911
912 iosf_mbi_modify(LPSS_IOSF_UNIT_LPIO2, MBI_CFG_WRITE,
913 LPSS_IOSF_PMCSR, value2, mask2);
914
915 iosf_mbi_modify(LPSS_IOSF_UNIT_LPIOEP, MBI_CR_WRITE,
916 LPSS_IOSF_GPIODEF0, value1, mask1);
917exit:
918 mutex_unlock(&lpss_iosf_mutex);
919}
920
921static void lpss_iosf_exit_d3_state(void)
922{
923 u32 value1 = LPSS_GPIODEF0_DMA1_D3 | LPSS_GPIODEF0_DMA2_D3 |
924 LPSS_GPIODEF0_DMA_LLP;
925 u32 mask1 = LPSS_GPIODEF0_DMA_D3_MASK | LPSS_GPIODEF0_DMA_LLP;
926 u32 value2 = LPSS_PMCSR_D0;
927 u32 mask2 = LPSS_PMCSR_Dx_MASK;
928
929 mutex_lock(&lpss_iosf_mutex);
930
931 iosf_mbi_modify(LPSS_IOSF_UNIT_LPIOEP, MBI_CR_WRITE,
932 LPSS_IOSF_GPIODEF0, value1, mask1);
933
934 iosf_mbi_modify(LPSS_IOSF_UNIT_LPIO2, MBI_CFG_WRITE,
935 LPSS_IOSF_PMCSR, value2, mask2);
936
937 iosf_mbi_modify(LPSS_IOSF_UNIT_LPIO1, MBI_CFG_WRITE,
938 LPSS_IOSF_PMCSR, value2, mask2);
939
940 mutex_unlock(&lpss_iosf_mutex);
941}
942
943static int acpi_lpss_suspend(struct device *dev, bool wakeup)
944{
945 struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
946 int ret;
947
948 if (pdata->dev_desc->flags & LPSS_SAVE_CTX)
949 acpi_lpss_save_ctx(dev, pdata);
950
951 ret = acpi_dev_suspend(dev, wakeup);
952
953 /*
954 * This call must be last in the sequence, otherwise PMC will return
955 * wrong status for devices being about to be powered off. See
956 * lpss_iosf_enter_d3_state() for further information.
957 */
958 if (lpss_quirks & LPSS_QUIRK_ALWAYS_POWER_ON && iosf_mbi_available())
959 lpss_iosf_enter_d3_state();
960
961 return ret;
962}
963
964static int acpi_lpss_resume(struct device *dev)
965{
966 struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
967 int ret;
968
969 /*
970 * This call is kept first to be in symmetry with
971 * acpi_lpss_runtime_suspend() one.
972 */
973 if (lpss_quirks & LPSS_QUIRK_ALWAYS_POWER_ON && iosf_mbi_available())
974 lpss_iosf_exit_d3_state();
975
976 ret = acpi_dev_resume(dev);
977 if (ret)
978 return ret;
979
980 acpi_lpss_d3_to_d0_delay(pdata);
981
982 if (pdata->dev_desc->flags & LPSS_SAVE_CTX)
983 acpi_lpss_restore_ctx(dev, pdata);
984
985 return 0;
986}
987
988#ifdef CONFIG_PM_SLEEP
989static int acpi_lpss_suspend_late(struct device *dev)
990{
991 int ret;
992
993 if (dev_pm_smart_suspend_and_suspended(dev))
994 return 0;
995
996 ret = pm_generic_suspend_late(dev);
997 return ret ? ret : acpi_lpss_suspend(dev, device_may_wakeup(dev));
998}
999
1000static int acpi_lpss_resume_early(struct device *dev)
1001{
1002 int ret = acpi_lpss_resume(dev);
1003
1004 return ret ? ret : pm_generic_resume_early(dev);
1005}
1006#endif /* CONFIG_PM_SLEEP */
1007
1008static int acpi_lpss_runtime_suspend(struct device *dev)
1009{
1010 int ret = pm_generic_runtime_suspend(dev);
1011
1012 return ret ? ret : acpi_lpss_suspend(dev, true);
1013}
1014
1015static int acpi_lpss_runtime_resume(struct device *dev)
1016{
1017 int ret = acpi_lpss_resume(dev);
1018
1019 return ret ? ret : pm_generic_runtime_resume(dev);
1020}
1021#endif /* CONFIG_PM */
1022
1023static struct dev_pm_domain acpi_lpss_pm_domain = {
1024#ifdef CONFIG_PM
1025 .activate = acpi_lpss_activate,
1026 .dismiss = acpi_lpss_dismiss,
1027#endif
1028 .ops = {
1029#ifdef CONFIG_PM
1030#ifdef CONFIG_PM_SLEEP
1031 .prepare = acpi_subsys_prepare,
1032 .complete = acpi_subsys_complete,
1033 .suspend = acpi_subsys_suspend,
1034 .suspend_late = acpi_lpss_suspend_late,
1035 .suspend_noirq = acpi_subsys_suspend_noirq,
1036 .resume_noirq = acpi_subsys_resume_noirq,
1037 .resume_early = acpi_lpss_resume_early,
1038 .freeze = acpi_subsys_freeze,
1039 .freeze_late = acpi_subsys_freeze_late,
1040 .freeze_noirq = acpi_subsys_freeze_noirq,
1041 .thaw_noirq = acpi_subsys_thaw_noirq,
1042 .poweroff = acpi_subsys_suspend,
1043 .poweroff_late = acpi_lpss_suspend_late,
1044 .poweroff_noirq = acpi_subsys_suspend_noirq,
1045 .restore_noirq = acpi_subsys_resume_noirq,
1046 .restore_early = acpi_lpss_resume_early,
1047#endif
1048 .runtime_suspend = acpi_lpss_runtime_suspend,
1049 .runtime_resume = acpi_lpss_runtime_resume,
1050#endif
1051 },
1052};
1053
1054static int acpi_lpss_platform_notify(struct notifier_block *nb,
1055 unsigned long action, void *data)
1056{
1057 struct platform_device *pdev = to_platform_device(data);
1058 struct lpss_private_data *pdata;
1059 struct acpi_device *adev;
1060 const struct acpi_device_id *id;
1061
1062 id = acpi_match_device(acpi_lpss_device_ids, &pdev->dev);
1063 if (!id || !id->driver_data)
1064 return 0;
1065
1066 if (acpi_bus_get_device(ACPI_HANDLE(&pdev->dev), &adev))
1067 return 0;
1068
1069 pdata = acpi_driver_data(adev);
1070 if (!pdata)
1071 return 0;
1072
1073 if (pdata->mmio_base &&
1074 pdata->mmio_size < pdata->dev_desc->prv_offset + LPSS_LTR_SIZE) {
1075 dev_err(&pdev->dev, "MMIO size insufficient to access LTR\n");
1076 return 0;
1077 }
1078
1079 switch (action) {
1080 case BUS_NOTIFY_BIND_DRIVER:
1081 dev_pm_domain_set(&pdev->dev, &acpi_lpss_pm_domain);
1082 break;
1083 case BUS_NOTIFY_DRIVER_NOT_BOUND:
1084 case BUS_NOTIFY_UNBOUND_DRIVER:
1085 dev_pm_domain_set(&pdev->dev, NULL);
1086 break;
1087 case BUS_NOTIFY_ADD_DEVICE:
1088 dev_pm_domain_set(&pdev->dev, &acpi_lpss_pm_domain);
1089 if (pdata->dev_desc->flags & LPSS_LTR)
1090 return sysfs_create_group(&pdev->dev.kobj,
1091 &lpss_attr_group);
1092 break;
1093 case BUS_NOTIFY_DEL_DEVICE:
1094 if (pdata->dev_desc->flags & LPSS_LTR)
1095 sysfs_remove_group(&pdev->dev.kobj, &lpss_attr_group);
1096 dev_pm_domain_set(&pdev->dev, NULL);
1097 break;
1098 default:
1099 break;
1100 }
1101
1102 return 0;
1103}
1104
1105static struct notifier_block acpi_lpss_nb = {
1106 .notifier_call = acpi_lpss_platform_notify,
1107};
1108
1109static void acpi_lpss_bind(struct device *dev)
1110{
1111 struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
1112
1113 if (!pdata || !pdata->mmio_base || !(pdata->dev_desc->flags & LPSS_LTR))
1114 return;
1115
1116 if (pdata->mmio_size >= pdata->dev_desc->prv_offset + LPSS_LTR_SIZE)
1117 dev->power.set_latency_tolerance = acpi_lpss_set_ltr;
1118 else
1119 dev_err(dev, "MMIO size insufficient to access LTR\n");
1120}
1121
1122static void acpi_lpss_unbind(struct device *dev)
1123{
1124 dev->power.set_latency_tolerance = NULL;
1125}
1126
1127static struct acpi_scan_handler lpss_handler = {
1128 .ids = acpi_lpss_device_ids,
1129 .attach = acpi_lpss_create_device,
1130 .bind = acpi_lpss_bind,
1131 .unbind = acpi_lpss_unbind,
1132};
1133
1134void __init acpi_lpss_init(void)
1135{
1136 const struct x86_cpu_id *id;
1137 int ret;
1138
1139 ret = lpt_clk_init();
1140 if (ret)
1141 return;
1142
1143 id = x86_match_cpu(lpss_cpu_ids);
1144 if (id)
1145 lpss_quirks |= LPSS_QUIRK_ALWAYS_POWER_ON;
1146
1147 bus_register_notifier(&platform_bus_type, &acpi_lpss_nb);
1148 acpi_scan_add_handler(&lpss_handler);
1149}
1150
1151#else
1152
1153static struct acpi_scan_handler lpss_handler = {
1154 .ids = acpi_lpss_device_ids,
1155};
1156
1157void __init acpi_lpss_init(void)
1158{
1159 acpi_scan_add_handler(&lpss_handler);
1160}
1161
1162#endif /* CONFIG_X86_INTEL_LPSS */