Loading...
1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * Driver for Freecom USB/IDE adaptor
4 *
5 * Freecom v0.1:
6 *
7 * First release
8 *
9 * Current development and maintenance by:
10 * (C) 2000 David Brown <usb-storage@davidb.org>
11 *
12 * This driver was developed with information provided in FREECOM's USB
13 * Programmers Reference Guide. For further information contact Freecom
14 * (https://www.freecom.de/)
15 */
16
17#include <linux/module.h>
18#include <scsi/scsi.h>
19#include <scsi/scsi_cmnd.h>
20
21#include "usb.h"
22#include "transport.h"
23#include "protocol.h"
24#include "debug.h"
25#include "scsiglue.h"
26
27#define DRV_NAME "ums-freecom"
28
29MODULE_DESCRIPTION("Driver for Freecom USB/IDE adaptor");
30MODULE_AUTHOR("David Brown <usb-storage@davidb.org>");
31MODULE_LICENSE("GPL");
32MODULE_IMPORT_NS(USB_STORAGE);
33
34#ifdef CONFIG_USB_STORAGE_DEBUG
35static void pdump(struct us_data *us, void *ibuffer, int length);
36#endif
37
38/* Bits of HD_STATUS */
39#define ERR_STAT 0x01
40#define DRQ_STAT 0x08
41
42/* All of the outgoing packets are 64 bytes long. */
43struct freecom_cb_wrap {
44 u8 Type; /* Command type. */
45 u8 Timeout; /* Timeout in seconds. */
46 u8 Atapi[12]; /* An ATAPI packet. */
47 u8 Filler[50]; /* Padding Data. */
48};
49
50struct freecom_xfer_wrap {
51 u8 Type; /* Command type. */
52 u8 Timeout; /* Timeout in seconds. */
53 __le32 Count; /* Number of bytes to transfer. */
54 u8 Pad[58];
55} __attribute__ ((packed));
56
57struct freecom_ide_out {
58 u8 Type; /* Type + IDE register. */
59 u8 Pad;
60 __le16 Value; /* Value to write. */
61 u8 Pad2[60];
62};
63
64struct freecom_ide_in {
65 u8 Type; /* Type | IDE register. */
66 u8 Pad[63];
67};
68
69struct freecom_status {
70 u8 Status;
71 u8 Reason;
72 __le16 Count;
73 u8 Pad[60];
74};
75
76/*
77 * Freecom stuffs the interrupt status in the INDEX_STAT bit of the ide
78 * register.
79 */
80#define FCM_INT_STATUS 0x02 /* INDEX_STAT */
81#define FCM_STATUS_BUSY 0x80
82
83/*
84 * These are the packet types. The low bit indicates that this command
85 * should wait for an interrupt.
86 */
87#define FCM_PACKET_ATAPI 0x21
88#define FCM_PACKET_STATUS 0x20
89
90/*
91 * Receive data from the IDE interface. The ATAPI packet has already
92 * waited, so the data should be immediately available.
93 */
94#define FCM_PACKET_INPUT 0x81
95
96/* Send data to the IDE interface. */
97#define FCM_PACKET_OUTPUT 0x01
98
99/*
100 * Write a value to an ide register. Or the ide register to write after
101 * munging the address a bit.
102 */
103#define FCM_PACKET_IDE_WRITE 0x40
104#define FCM_PACKET_IDE_READ 0xC0
105
106/* All packets (except for status) are 64 bytes long. */
107#define FCM_PACKET_LENGTH 64
108#define FCM_STATUS_PACKET_LENGTH 4
109
110static int init_freecom(struct us_data *us);
111
112
113/*
114 * The table of devices
115 */
116#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
117 vendorName, productName, useProtocol, useTransport, \
118 initFunction, flags) \
119{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
120 .driver_info = (flags) }
121
122static struct usb_device_id freecom_usb_ids[] = {
123# include "unusual_freecom.h"
124 { } /* Terminating entry */
125};
126MODULE_DEVICE_TABLE(usb, freecom_usb_ids);
127
128#undef UNUSUAL_DEV
129
130/*
131 * The flags table
132 */
133#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
134 vendor_name, product_name, use_protocol, use_transport, \
135 init_function, Flags) \
136{ \
137 .vendorName = vendor_name, \
138 .productName = product_name, \
139 .useProtocol = use_protocol, \
140 .useTransport = use_transport, \
141 .initFunction = init_function, \
142}
143
144static struct us_unusual_dev freecom_unusual_dev_list[] = {
145# include "unusual_freecom.h"
146 { } /* Terminating entry */
147};
148
149#undef UNUSUAL_DEV
150
151static int
152freecom_readdata (struct scsi_cmnd *srb, struct us_data *us,
153 unsigned int ipipe, unsigned int opipe, int count)
154{
155 struct freecom_xfer_wrap *fxfr =
156 (struct freecom_xfer_wrap *) us->iobuf;
157 int result;
158
159 fxfr->Type = FCM_PACKET_INPUT | 0x00;
160 fxfr->Timeout = 0; /* Short timeout for debugging. */
161 fxfr->Count = cpu_to_le32 (count);
162 memset (fxfr->Pad, 0, sizeof (fxfr->Pad));
163
164 usb_stor_dbg(us, "Read data Freecom! (c=%d)\n", count);
165
166 /* Issue the transfer command. */
167 result = usb_stor_bulk_transfer_buf (us, opipe, fxfr,
168 FCM_PACKET_LENGTH, NULL);
169 if (result != USB_STOR_XFER_GOOD) {
170 usb_stor_dbg(us, "Freecom readdata transport error\n");
171 return USB_STOR_TRANSPORT_ERROR;
172 }
173
174 /* Now transfer all of our blocks. */
175 usb_stor_dbg(us, "Start of read\n");
176 result = usb_stor_bulk_srb(us, ipipe, srb);
177 usb_stor_dbg(us, "freecom_readdata done!\n");
178
179 if (result > USB_STOR_XFER_SHORT)
180 return USB_STOR_TRANSPORT_ERROR;
181 return USB_STOR_TRANSPORT_GOOD;
182}
183
184static int
185freecom_writedata (struct scsi_cmnd *srb, struct us_data *us,
186 int unsigned ipipe, unsigned int opipe, int count)
187{
188 struct freecom_xfer_wrap *fxfr =
189 (struct freecom_xfer_wrap *) us->iobuf;
190 int result;
191
192 fxfr->Type = FCM_PACKET_OUTPUT | 0x00;
193 fxfr->Timeout = 0; /* Short timeout for debugging. */
194 fxfr->Count = cpu_to_le32 (count);
195 memset (fxfr->Pad, 0, sizeof (fxfr->Pad));
196
197 usb_stor_dbg(us, "Write data Freecom! (c=%d)\n", count);
198
199 /* Issue the transfer command. */
200 result = usb_stor_bulk_transfer_buf (us, opipe, fxfr,
201 FCM_PACKET_LENGTH, NULL);
202 if (result != USB_STOR_XFER_GOOD) {
203 usb_stor_dbg(us, "Freecom writedata transport error\n");
204 return USB_STOR_TRANSPORT_ERROR;
205 }
206
207 /* Now transfer all of our blocks. */
208 usb_stor_dbg(us, "Start of write\n");
209 result = usb_stor_bulk_srb(us, opipe, srb);
210
211 usb_stor_dbg(us, "freecom_writedata done!\n");
212 if (result > USB_STOR_XFER_SHORT)
213 return USB_STOR_TRANSPORT_ERROR;
214 return USB_STOR_TRANSPORT_GOOD;
215}
216
217/*
218 * Transport for the Freecom USB/IDE adaptor.
219 *
220 */
221static int freecom_transport(struct scsi_cmnd *srb, struct us_data *us)
222{
223 struct freecom_cb_wrap *fcb;
224 struct freecom_status *fst;
225 unsigned int ipipe, opipe; /* We need both pipes. */
226 int result;
227 unsigned int partial;
228 int length;
229
230 fcb = (struct freecom_cb_wrap *) us->iobuf;
231 fst = (struct freecom_status *) us->iobuf;
232
233 usb_stor_dbg(us, "Freecom TRANSPORT STARTED\n");
234
235 /* Get handles for both transports. */
236 opipe = us->send_bulk_pipe;
237 ipipe = us->recv_bulk_pipe;
238
239 /* The ATAPI Command always goes out first. */
240 fcb->Type = FCM_PACKET_ATAPI | 0x00;
241 fcb->Timeout = 0;
242 memcpy (fcb->Atapi, srb->cmnd, 12);
243 memset (fcb->Filler, 0, sizeof (fcb->Filler));
244
245 US_DEBUG(pdump(us, srb->cmnd, 12));
246
247 /* Send it out. */
248 result = usb_stor_bulk_transfer_buf (us, opipe, fcb,
249 FCM_PACKET_LENGTH, NULL);
250
251 /*
252 * The Freecom device will only fail if there is something wrong in
253 * USB land. It returns the status in its own registers, which
254 * come back in the bulk pipe.
255 */
256 if (result != USB_STOR_XFER_GOOD) {
257 usb_stor_dbg(us, "freecom transport error\n");
258 return USB_STOR_TRANSPORT_ERROR;
259 }
260
261 /*
262 * There are times we can optimize out this status read, but it
263 * doesn't hurt us to always do it now.
264 */
265 result = usb_stor_bulk_transfer_buf (us, ipipe, fst,
266 FCM_STATUS_PACKET_LENGTH, &partial);
267 usb_stor_dbg(us, "foo Status result %d %u\n", result, partial);
268 if (result != USB_STOR_XFER_GOOD)
269 return USB_STOR_TRANSPORT_ERROR;
270
271 US_DEBUG(pdump(us, (void *)fst, partial));
272
273 /*
274 * The firmware will time-out commands after 20 seconds. Some commands
275 * can legitimately take longer than this, so we use a different
276 * command that only waits for the interrupt and then sends status,
277 * without having to send a new ATAPI command to the device.
278 *
279 * NOTE: There is some indication that a data transfer after a timeout
280 * may not work, but that is a condition that should never happen.
281 */
282 while (fst->Status & FCM_STATUS_BUSY) {
283 usb_stor_dbg(us, "20 second USB/ATAPI bridge TIMEOUT occurred!\n");
284 usb_stor_dbg(us, "fst->Status is %x\n", fst->Status);
285
286 /* Get the status again */
287 fcb->Type = FCM_PACKET_STATUS;
288 fcb->Timeout = 0;
289 memset (fcb->Atapi, 0, sizeof(fcb->Atapi));
290 memset (fcb->Filler, 0, sizeof (fcb->Filler));
291
292 /* Send it out. */
293 result = usb_stor_bulk_transfer_buf (us, opipe, fcb,
294 FCM_PACKET_LENGTH, NULL);
295
296 /*
297 * The Freecom device will only fail if there is something
298 * wrong in USB land. It returns the status in its own
299 * registers, which come back in the bulk pipe.
300 */
301 if (result != USB_STOR_XFER_GOOD) {
302 usb_stor_dbg(us, "freecom transport error\n");
303 return USB_STOR_TRANSPORT_ERROR;
304 }
305
306 /* get the data */
307 result = usb_stor_bulk_transfer_buf (us, ipipe, fst,
308 FCM_STATUS_PACKET_LENGTH, &partial);
309
310 usb_stor_dbg(us, "bar Status result %d %u\n", result, partial);
311 if (result != USB_STOR_XFER_GOOD)
312 return USB_STOR_TRANSPORT_ERROR;
313
314 US_DEBUG(pdump(us, (void *)fst, partial));
315 }
316
317 if (partial != 4)
318 return USB_STOR_TRANSPORT_ERROR;
319 if ((fst->Status & 1) != 0) {
320 usb_stor_dbg(us, "operation failed\n");
321 return USB_STOR_TRANSPORT_FAILED;
322 }
323
324 /*
325 * The device might not have as much data available as we
326 * requested. If you ask for more than the device has, this reads
327 * and such will hang.
328 */
329 usb_stor_dbg(us, "Device indicates that it has %d bytes available\n",
330 le16_to_cpu(fst->Count));
331 usb_stor_dbg(us, "SCSI requested %d\n", scsi_bufflen(srb));
332
333 /* Find the length we desire to read. */
334 switch (srb->cmnd[0]) {
335 case INQUIRY:
336 case REQUEST_SENSE: /* 16 or 18 bytes? spec says 18, lots of devices only have 16 */
337 case MODE_SENSE:
338 case MODE_SENSE_10:
339 length = le16_to_cpu(fst->Count);
340 break;
341 default:
342 length = scsi_bufflen(srb);
343 }
344
345 /* verify that this amount is legal */
346 if (length > scsi_bufflen(srb)) {
347 length = scsi_bufflen(srb);
348 usb_stor_dbg(us, "Truncating request to match buffer length: %d\n",
349 length);
350 }
351
352 /*
353 * What we do now depends on what direction the data is supposed to
354 * move in.
355 */
356
357 switch (us->srb->sc_data_direction) {
358 case DMA_FROM_DEVICE:
359 /* catch bogus "read 0 length" case */
360 if (!length)
361 break;
362 /*
363 * Make sure that the status indicates that the device
364 * wants data as well.
365 */
366 if ((fst->Status & DRQ_STAT) == 0 || (fst->Reason & 3) != 2) {
367 usb_stor_dbg(us, "SCSI wants data, drive doesn't have any\n");
368 return USB_STOR_TRANSPORT_FAILED;
369 }
370 result = freecom_readdata (srb, us, ipipe, opipe, length);
371 if (result != USB_STOR_TRANSPORT_GOOD)
372 return result;
373
374 usb_stor_dbg(us, "Waiting for status\n");
375 result = usb_stor_bulk_transfer_buf (us, ipipe, fst,
376 FCM_PACKET_LENGTH, &partial);
377 US_DEBUG(pdump(us, (void *)fst, partial));
378
379 if (partial != 4 || result > USB_STOR_XFER_SHORT)
380 return USB_STOR_TRANSPORT_ERROR;
381 if ((fst->Status & ERR_STAT) != 0) {
382 usb_stor_dbg(us, "operation failed\n");
383 return USB_STOR_TRANSPORT_FAILED;
384 }
385 if ((fst->Reason & 3) != 3) {
386 usb_stor_dbg(us, "Drive seems still hungry\n");
387 return USB_STOR_TRANSPORT_FAILED;
388 }
389 usb_stor_dbg(us, "Transfer happy\n");
390 break;
391
392 case DMA_TO_DEVICE:
393 /* catch bogus "write 0 length" case */
394 if (!length)
395 break;
396 /*
397 * Make sure the status indicates that the device wants to
398 * send us data.
399 */
400 /* !!IMPLEMENT!! */
401 result = freecom_writedata (srb, us, ipipe, opipe, length);
402 if (result != USB_STOR_TRANSPORT_GOOD)
403 return result;
404
405 usb_stor_dbg(us, "Waiting for status\n");
406 result = usb_stor_bulk_transfer_buf (us, ipipe, fst,
407 FCM_PACKET_LENGTH, &partial);
408
409 if (partial != 4 || result > USB_STOR_XFER_SHORT)
410 return USB_STOR_TRANSPORT_ERROR;
411 if ((fst->Status & ERR_STAT) != 0) {
412 usb_stor_dbg(us, "operation failed\n");
413 return USB_STOR_TRANSPORT_FAILED;
414 }
415 if ((fst->Reason & 3) != 3) {
416 usb_stor_dbg(us, "Drive seems still hungry\n");
417 return USB_STOR_TRANSPORT_FAILED;
418 }
419
420 usb_stor_dbg(us, "Transfer happy\n");
421 break;
422
423
424 case DMA_NONE:
425 /* Easy, do nothing. */
426 break;
427
428 default:
429 /* should never hit here -- filtered in usb.c */
430 usb_stor_dbg(us, "freecom unimplemented direction: %d\n",
431 us->srb->sc_data_direction);
432 /* Return fail, SCSI seems to handle this better. */
433 return USB_STOR_TRANSPORT_FAILED;
434 }
435
436 return USB_STOR_TRANSPORT_GOOD;
437}
438
439static int init_freecom(struct us_data *us)
440{
441 int result;
442 char *buffer = us->iobuf;
443
444 /*
445 * The DMA-mapped I/O buffer is 64 bytes long, just right for
446 * all our packets. No need to allocate any extra buffer space.
447 */
448
449 result = usb_stor_control_msg(us, us->recv_ctrl_pipe,
450 0x4c, 0xc0, 0x4346, 0x0, buffer, 0x20, 3*HZ);
451 buffer[32] = '\0';
452 usb_stor_dbg(us, "String returned from FC init is: %s\n", buffer);
453
454 /*
455 * Special thanks to the people at Freecom for providing me with
456 * this "magic sequence", which they use in their Windows and MacOS
457 * drivers to make sure that all the attached perhiperals are
458 * properly reset.
459 */
460
461 /* send reset */
462 result = usb_stor_control_msg(us, us->send_ctrl_pipe,
463 0x4d, 0x40, 0x24d8, 0x0, NULL, 0x0, 3*HZ);
464 usb_stor_dbg(us, "result from activate reset is %d\n", result);
465
466 /* wait 250ms */
467 msleep(250);
468
469 /* clear reset */
470 result = usb_stor_control_msg(us, us->send_ctrl_pipe,
471 0x4d, 0x40, 0x24f8, 0x0, NULL, 0x0, 3*HZ);
472 usb_stor_dbg(us, "result from clear reset is %d\n", result);
473
474 /* wait 3 seconds */
475 msleep(3 * 1000);
476
477 return USB_STOR_TRANSPORT_GOOD;
478}
479
480static int usb_stor_freecom_reset(struct us_data *us)
481{
482 printk (KERN_CRIT "freecom reset called\n");
483
484 /* We don't really have this feature. */
485 return FAILED;
486}
487
488#ifdef CONFIG_USB_STORAGE_DEBUG
489static void pdump(struct us_data *us, void *ibuffer, int length)
490{
491 static char line[80];
492 int offset = 0;
493 unsigned char *buffer = (unsigned char *) ibuffer;
494 int i, j;
495 int from, base;
496
497 offset = 0;
498 for (i = 0; i < length; i++) {
499 if ((i & 15) == 0) {
500 if (i > 0) {
501 offset += sprintf (line+offset, " - ");
502 for (j = i - 16; j < i; j++) {
503 if (buffer[j] >= 32 && buffer[j] <= 126)
504 line[offset++] = buffer[j];
505 else
506 line[offset++] = '.';
507 }
508 line[offset] = 0;
509 usb_stor_dbg(us, "%s\n", line);
510 offset = 0;
511 }
512 offset += sprintf (line+offset, "%08x:", i);
513 } else if ((i & 7) == 0) {
514 offset += sprintf (line+offset, " -");
515 }
516 offset += sprintf (line+offset, " %02x", buffer[i] & 0xff);
517 }
518
519 /* Add the last "chunk" of data. */
520 from = (length - 1) % 16;
521 base = ((length - 1) / 16) * 16;
522
523 for (i = from + 1; i < 16; i++)
524 offset += sprintf (line+offset, " ");
525 if (from < 8)
526 offset += sprintf (line+offset, " ");
527 offset += sprintf (line+offset, " - ");
528
529 for (i = 0; i <= from; i++) {
530 if (buffer[base+i] >= 32 && buffer[base+i] <= 126)
531 line[offset++] = buffer[base+i];
532 else
533 line[offset++] = '.';
534 }
535 line[offset] = 0;
536 usb_stor_dbg(us, "%s\n", line);
537 offset = 0;
538}
539#endif
540
541static struct scsi_host_template freecom_host_template;
542
543static int freecom_probe(struct usb_interface *intf,
544 const struct usb_device_id *id)
545{
546 struct us_data *us;
547 int result;
548
549 result = usb_stor_probe1(&us, intf, id,
550 (id - freecom_usb_ids) + freecom_unusual_dev_list,
551 &freecom_host_template);
552 if (result)
553 return result;
554
555 us->transport_name = "Freecom";
556 us->transport = freecom_transport;
557 us->transport_reset = usb_stor_freecom_reset;
558 us->max_lun = 0;
559
560 result = usb_stor_probe2(us);
561 return result;
562}
563
564static struct usb_driver freecom_driver = {
565 .name = DRV_NAME,
566 .probe = freecom_probe,
567 .disconnect = usb_stor_disconnect,
568 .suspend = usb_stor_suspend,
569 .resume = usb_stor_resume,
570 .reset_resume = usb_stor_reset_resume,
571 .pre_reset = usb_stor_pre_reset,
572 .post_reset = usb_stor_post_reset,
573 .id_table = freecom_usb_ids,
574 .soft_unbind = 1,
575 .no_dynamic_id = 1,
576};
577
578module_usb_stor_driver(freecom_driver, freecom_host_template, DRV_NAME);
1/*
2 * Driver for Freecom USB/IDE adaptor
3 *
4 * Freecom v0.1:
5 *
6 * First release
7 *
8 * Current development and maintenance by:
9 * (C) 2000 David Brown <usb-storage@davidb.org>
10 *
11 * This program is free software; you can redistribute it and/or modify it
12 * under the terms of the GNU General Public License as published by the
13 * Free Software Foundation; either version 2, or (at your option) any
14 * later version.
15 *
16 * This program is distributed in the hope that it will be useful, but
17 * WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
19 * General Public License for more details.
20 *
21 * You should have received a copy of the GNU General Public License along
22 * with this program; if not, write to the Free Software Foundation, Inc.,
23 * 675 Mass Ave, Cambridge, MA 02139, USA.
24 *
25 * This driver was developed with information provided in FREECOM's USB
26 * Programmers Reference Guide. For further information contact Freecom
27 * (http://www.freecom.de/)
28 */
29
30#include <linux/module.h>
31#include <scsi/scsi.h>
32#include <scsi/scsi_cmnd.h>
33
34#include "usb.h"
35#include "transport.h"
36#include "protocol.h"
37#include "debug.h"
38#include "scsiglue.h"
39
40#define DRV_NAME "ums-freecom"
41
42MODULE_DESCRIPTION("Driver for Freecom USB/IDE adaptor");
43MODULE_AUTHOR("David Brown <usb-storage@davidb.org>");
44MODULE_LICENSE("GPL");
45
46#ifdef CONFIG_USB_STORAGE_DEBUG
47static void pdump(struct us_data *us, void *ibuffer, int length);
48#endif
49
50/* Bits of HD_STATUS */
51#define ERR_STAT 0x01
52#define DRQ_STAT 0x08
53
54/* All of the outgoing packets are 64 bytes long. */
55struct freecom_cb_wrap {
56 u8 Type; /* Command type. */
57 u8 Timeout; /* Timeout in seconds. */
58 u8 Atapi[12]; /* An ATAPI packet. */
59 u8 Filler[50]; /* Padding Data. */
60};
61
62struct freecom_xfer_wrap {
63 u8 Type; /* Command type. */
64 u8 Timeout; /* Timeout in seconds. */
65 __le32 Count; /* Number of bytes to transfer. */
66 u8 Pad[58];
67} __attribute__ ((packed));
68
69struct freecom_ide_out {
70 u8 Type; /* Type + IDE register. */
71 u8 Pad;
72 __le16 Value; /* Value to write. */
73 u8 Pad2[60];
74};
75
76struct freecom_ide_in {
77 u8 Type; /* Type | IDE register. */
78 u8 Pad[63];
79};
80
81struct freecom_status {
82 u8 Status;
83 u8 Reason;
84 __le16 Count;
85 u8 Pad[60];
86};
87
88/*
89 * Freecom stuffs the interrupt status in the INDEX_STAT bit of the ide
90 * register.
91 */
92#define FCM_INT_STATUS 0x02 /* INDEX_STAT */
93#define FCM_STATUS_BUSY 0x80
94
95/*
96 * These are the packet types. The low bit indicates that this command
97 * should wait for an interrupt.
98 */
99#define FCM_PACKET_ATAPI 0x21
100#define FCM_PACKET_STATUS 0x20
101
102/*
103 * Receive data from the IDE interface. The ATAPI packet has already
104 * waited, so the data should be immediately available.
105 */
106#define FCM_PACKET_INPUT 0x81
107
108/* Send data to the IDE interface. */
109#define FCM_PACKET_OUTPUT 0x01
110
111/*
112 * Write a value to an ide register. Or the ide register to write after
113 * munging the address a bit.
114 */
115#define FCM_PACKET_IDE_WRITE 0x40
116#define FCM_PACKET_IDE_READ 0xC0
117
118/* All packets (except for status) are 64 bytes long. */
119#define FCM_PACKET_LENGTH 64
120#define FCM_STATUS_PACKET_LENGTH 4
121
122static int init_freecom(struct us_data *us);
123
124
125/*
126 * The table of devices
127 */
128#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
129 vendorName, productName, useProtocol, useTransport, \
130 initFunction, flags) \
131{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
132 .driver_info = (flags) }
133
134static struct usb_device_id freecom_usb_ids[] = {
135# include "unusual_freecom.h"
136 { } /* Terminating entry */
137};
138MODULE_DEVICE_TABLE(usb, freecom_usb_ids);
139
140#undef UNUSUAL_DEV
141
142/*
143 * The flags table
144 */
145#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
146 vendor_name, product_name, use_protocol, use_transport, \
147 init_function, Flags) \
148{ \
149 .vendorName = vendor_name, \
150 .productName = product_name, \
151 .useProtocol = use_protocol, \
152 .useTransport = use_transport, \
153 .initFunction = init_function, \
154}
155
156static struct us_unusual_dev freecom_unusual_dev_list[] = {
157# include "unusual_freecom.h"
158 { } /* Terminating entry */
159};
160
161#undef UNUSUAL_DEV
162
163static int
164freecom_readdata (struct scsi_cmnd *srb, struct us_data *us,
165 unsigned int ipipe, unsigned int opipe, int count)
166{
167 struct freecom_xfer_wrap *fxfr =
168 (struct freecom_xfer_wrap *) us->iobuf;
169 int result;
170
171 fxfr->Type = FCM_PACKET_INPUT | 0x00;
172 fxfr->Timeout = 0; /* Short timeout for debugging. */
173 fxfr->Count = cpu_to_le32 (count);
174 memset (fxfr->Pad, 0, sizeof (fxfr->Pad));
175
176 usb_stor_dbg(us, "Read data Freecom! (c=%d)\n", count);
177
178 /* Issue the transfer command. */
179 result = usb_stor_bulk_transfer_buf (us, opipe, fxfr,
180 FCM_PACKET_LENGTH, NULL);
181 if (result != USB_STOR_XFER_GOOD) {
182 usb_stor_dbg(us, "Freecom readdata transport error\n");
183 return USB_STOR_TRANSPORT_ERROR;
184 }
185
186 /* Now transfer all of our blocks. */
187 usb_stor_dbg(us, "Start of read\n");
188 result = usb_stor_bulk_srb(us, ipipe, srb);
189 usb_stor_dbg(us, "freecom_readdata done!\n");
190
191 if (result > USB_STOR_XFER_SHORT)
192 return USB_STOR_TRANSPORT_ERROR;
193 return USB_STOR_TRANSPORT_GOOD;
194}
195
196static int
197freecom_writedata (struct scsi_cmnd *srb, struct us_data *us,
198 int unsigned ipipe, unsigned int opipe, int count)
199{
200 struct freecom_xfer_wrap *fxfr =
201 (struct freecom_xfer_wrap *) us->iobuf;
202 int result;
203
204 fxfr->Type = FCM_PACKET_OUTPUT | 0x00;
205 fxfr->Timeout = 0; /* Short timeout for debugging. */
206 fxfr->Count = cpu_to_le32 (count);
207 memset (fxfr->Pad, 0, sizeof (fxfr->Pad));
208
209 usb_stor_dbg(us, "Write data Freecom! (c=%d)\n", count);
210
211 /* Issue the transfer command. */
212 result = usb_stor_bulk_transfer_buf (us, opipe, fxfr,
213 FCM_PACKET_LENGTH, NULL);
214 if (result != USB_STOR_XFER_GOOD) {
215 usb_stor_dbg(us, "Freecom writedata transport error\n");
216 return USB_STOR_TRANSPORT_ERROR;
217 }
218
219 /* Now transfer all of our blocks. */
220 usb_stor_dbg(us, "Start of write\n");
221 result = usb_stor_bulk_srb(us, opipe, srb);
222
223 usb_stor_dbg(us, "freecom_writedata done!\n");
224 if (result > USB_STOR_XFER_SHORT)
225 return USB_STOR_TRANSPORT_ERROR;
226 return USB_STOR_TRANSPORT_GOOD;
227}
228
229/*
230 * Transport for the Freecom USB/IDE adaptor.
231 *
232 */
233static int freecom_transport(struct scsi_cmnd *srb, struct us_data *us)
234{
235 struct freecom_cb_wrap *fcb;
236 struct freecom_status *fst;
237 unsigned int ipipe, opipe; /* We need both pipes. */
238 int result;
239 unsigned int partial;
240 int length;
241
242 fcb = (struct freecom_cb_wrap *) us->iobuf;
243 fst = (struct freecom_status *) us->iobuf;
244
245 usb_stor_dbg(us, "Freecom TRANSPORT STARTED\n");
246
247 /* Get handles for both transports. */
248 opipe = us->send_bulk_pipe;
249 ipipe = us->recv_bulk_pipe;
250
251 /* The ATAPI Command always goes out first. */
252 fcb->Type = FCM_PACKET_ATAPI | 0x00;
253 fcb->Timeout = 0;
254 memcpy (fcb->Atapi, srb->cmnd, 12);
255 memset (fcb->Filler, 0, sizeof (fcb->Filler));
256
257 US_DEBUG(pdump(us, srb->cmnd, 12));
258
259 /* Send it out. */
260 result = usb_stor_bulk_transfer_buf (us, opipe, fcb,
261 FCM_PACKET_LENGTH, NULL);
262
263 /*
264 * The Freecom device will only fail if there is something wrong in
265 * USB land. It returns the status in its own registers, which
266 * come back in the bulk pipe.
267 */
268 if (result != USB_STOR_XFER_GOOD) {
269 usb_stor_dbg(us, "freecom transport error\n");
270 return USB_STOR_TRANSPORT_ERROR;
271 }
272
273 /*
274 * There are times we can optimize out this status read, but it
275 * doesn't hurt us to always do it now.
276 */
277 result = usb_stor_bulk_transfer_buf (us, ipipe, fst,
278 FCM_STATUS_PACKET_LENGTH, &partial);
279 usb_stor_dbg(us, "foo Status result %d %u\n", result, partial);
280 if (result != USB_STOR_XFER_GOOD)
281 return USB_STOR_TRANSPORT_ERROR;
282
283 US_DEBUG(pdump(us, (void *)fst, partial));
284
285 /*
286 * The firmware will time-out commands after 20 seconds. Some commands
287 * can legitimately take longer than this, so we use a different
288 * command that only waits for the interrupt and then sends status,
289 * without having to send a new ATAPI command to the device.
290 *
291 * NOTE: There is some indication that a data transfer after a timeout
292 * may not work, but that is a condition that should never happen.
293 */
294 while (fst->Status & FCM_STATUS_BUSY) {
295 usb_stor_dbg(us, "20 second USB/ATAPI bridge TIMEOUT occurred!\n");
296 usb_stor_dbg(us, "fst->Status is %x\n", fst->Status);
297
298 /* Get the status again */
299 fcb->Type = FCM_PACKET_STATUS;
300 fcb->Timeout = 0;
301 memset (fcb->Atapi, 0, sizeof(fcb->Atapi));
302 memset (fcb->Filler, 0, sizeof (fcb->Filler));
303
304 /* Send it out. */
305 result = usb_stor_bulk_transfer_buf (us, opipe, fcb,
306 FCM_PACKET_LENGTH, NULL);
307
308 /*
309 * The Freecom device will only fail if there is something
310 * wrong in USB land. It returns the status in its own
311 * registers, which come back in the bulk pipe.
312 */
313 if (result != USB_STOR_XFER_GOOD) {
314 usb_stor_dbg(us, "freecom transport error\n");
315 return USB_STOR_TRANSPORT_ERROR;
316 }
317
318 /* get the data */
319 result = usb_stor_bulk_transfer_buf (us, ipipe, fst,
320 FCM_STATUS_PACKET_LENGTH, &partial);
321
322 usb_stor_dbg(us, "bar Status result %d %u\n", result, partial);
323 if (result != USB_STOR_XFER_GOOD)
324 return USB_STOR_TRANSPORT_ERROR;
325
326 US_DEBUG(pdump(us, (void *)fst, partial));
327 }
328
329 if (partial != 4)
330 return USB_STOR_TRANSPORT_ERROR;
331 if ((fst->Status & 1) != 0) {
332 usb_stor_dbg(us, "operation failed\n");
333 return USB_STOR_TRANSPORT_FAILED;
334 }
335
336 /*
337 * The device might not have as much data available as we
338 * requested. If you ask for more than the device has, this reads
339 * and such will hang.
340 */
341 usb_stor_dbg(us, "Device indicates that it has %d bytes available\n",
342 le16_to_cpu(fst->Count));
343 usb_stor_dbg(us, "SCSI requested %d\n", scsi_bufflen(srb));
344
345 /* Find the length we desire to read. */
346 switch (srb->cmnd[0]) {
347 case INQUIRY:
348 case REQUEST_SENSE: /* 16 or 18 bytes? spec says 18, lots of devices only have 16 */
349 case MODE_SENSE:
350 case MODE_SENSE_10:
351 length = le16_to_cpu(fst->Count);
352 break;
353 default:
354 length = scsi_bufflen(srb);
355 }
356
357 /* verify that this amount is legal */
358 if (length > scsi_bufflen(srb)) {
359 length = scsi_bufflen(srb);
360 usb_stor_dbg(us, "Truncating request to match buffer length: %d\n",
361 length);
362 }
363
364 /*
365 * What we do now depends on what direction the data is supposed to
366 * move in.
367 */
368
369 switch (us->srb->sc_data_direction) {
370 case DMA_FROM_DEVICE:
371 /* catch bogus "read 0 length" case */
372 if (!length)
373 break;
374 /*
375 * Make sure that the status indicates that the device
376 * wants data as well.
377 */
378 if ((fst->Status & DRQ_STAT) == 0 || (fst->Reason & 3) != 2) {
379 usb_stor_dbg(us, "SCSI wants data, drive doesn't have any\n");
380 return USB_STOR_TRANSPORT_FAILED;
381 }
382 result = freecom_readdata (srb, us, ipipe, opipe, length);
383 if (result != USB_STOR_TRANSPORT_GOOD)
384 return result;
385
386 usb_stor_dbg(us, "Waiting for status\n");
387 result = usb_stor_bulk_transfer_buf (us, ipipe, fst,
388 FCM_PACKET_LENGTH, &partial);
389 US_DEBUG(pdump(us, (void *)fst, partial));
390
391 if (partial != 4 || result > USB_STOR_XFER_SHORT)
392 return USB_STOR_TRANSPORT_ERROR;
393 if ((fst->Status & ERR_STAT) != 0) {
394 usb_stor_dbg(us, "operation failed\n");
395 return USB_STOR_TRANSPORT_FAILED;
396 }
397 if ((fst->Reason & 3) != 3) {
398 usb_stor_dbg(us, "Drive seems still hungry\n");
399 return USB_STOR_TRANSPORT_FAILED;
400 }
401 usb_stor_dbg(us, "Transfer happy\n");
402 break;
403
404 case DMA_TO_DEVICE:
405 /* catch bogus "write 0 length" case */
406 if (!length)
407 break;
408 /*
409 * Make sure the status indicates that the device wants to
410 * send us data.
411 */
412 /* !!IMPLEMENT!! */
413 result = freecom_writedata (srb, us, ipipe, opipe, length);
414 if (result != USB_STOR_TRANSPORT_GOOD)
415 return result;
416
417 usb_stor_dbg(us, "Waiting for status\n");
418 result = usb_stor_bulk_transfer_buf (us, ipipe, fst,
419 FCM_PACKET_LENGTH, &partial);
420
421 if (partial != 4 || result > USB_STOR_XFER_SHORT)
422 return USB_STOR_TRANSPORT_ERROR;
423 if ((fst->Status & ERR_STAT) != 0) {
424 usb_stor_dbg(us, "operation failed\n");
425 return USB_STOR_TRANSPORT_FAILED;
426 }
427 if ((fst->Reason & 3) != 3) {
428 usb_stor_dbg(us, "Drive seems still hungry\n");
429 return USB_STOR_TRANSPORT_FAILED;
430 }
431
432 usb_stor_dbg(us, "Transfer happy\n");
433 break;
434
435
436 case DMA_NONE:
437 /* Easy, do nothing. */
438 break;
439
440 default:
441 /* should never hit here -- filtered in usb.c */
442 usb_stor_dbg(us, "freecom unimplemented direction: %d\n",
443 us->srb->sc_data_direction);
444 /* Return fail, SCSI seems to handle this better. */
445 return USB_STOR_TRANSPORT_FAILED;
446 break;
447 }
448
449 return USB_STOR_TRANSPORT_GOOD;
450}
451
452static int init_freecom(struct us_data *us)
453{
454 int result;
455 char *buffer = us->iobuf;
456
457 /*
458 * The DMA-mapped I/O buffer is 64 bytes long, just right for
459 * all our packets. No need to allocate any extra buffer space.
460 */
461
462 result = usb_stor_control_msg(us, us->recv_ctrl_pipe,
463 0x4c, 0xc0, 0x4346, 0x0, buffer, 0x20, 3*HZ);
464 buffer[32] = '\0';
465 usb_stor_dbg(us, "String returned from FC init is: %s\n", buffer);
466
467 /*
468 * Special thanks to the people at Freecom for providing me with
469 * this "magic sequence", which they use in their Windows and MacOS
470 * drivers to make sure that all the attached perhiperals are
471 * properly reset.
472 */
473
474 /* send reset */
475 result = usb_stor_control_msg(us, us->send_ctrl_pipe,
476 0x4d, 0x40, 0x24d8, 0x0, NULL, 0x0, 3*HZ);
477 usb_stor_dbg(us, "result from activate reset is %d\n", result);
478
479 /* wait 250ms */
480 mdelay(250);
481
482 /* clear reset */
483 result = usb_stor_control_msg(us, us->send_ctrl_pipe,
484 0x4d, 0x40, 0x24f8, 0x0, NULL, 0x0, 3*HZ);
485 usb_stor_dbg(us, "result from clear reset is %d\n", result);
486
487 /* wait 3 seconds */
488 mdelay(3 * 1000);
489
490 return USB_STOR_TRANSPORT_GOOD;
491}
492
493static int usb_stor_freecom_reset(struct us_data *us)
494{
495 printk (KERN_CRIT "freecom reset called\n");
496
497 /* We don't really have this feature. */
498 return FAILED;
499}
500
501#ifdef CONFIG_USB_STORAGE_DEBUG
502static void pdump(struct us_data *us, void *ibuffer, int length)
503{
504 static char line[80];
505 int offset = 0;
506 unsigned char *buffer = (unsigned char *) ibuffer;
507 int i, j;
508 int from, base;
509
510 offset = 0;
511 for (i = 0; i < length; i++) {
512 if ((i & 15) == 0) {
513 if (i > 0) {
514 offset += sprintf (line+offset, " - ");
515 for (j = i - 16; j < i; j++) {
516 if (buffer[j] >= 32 && buffer[j] <= 126)
517 line[offset++] = buffer[j];
518 else
519 line[offset++] = '.';
520 }
521 line[offset] = 0;
522 usb_stor_dbg(us, "%s\n", line);
523 offset = 0;
524 }
525 offset += sprintf (line+offset, "%08x:", i);
526 } else if ((i & 7) == 0) {
527 offset += sprintf (line+offset, " -");
528 }
529 offset += sprintf (line+offset, " %02x", buffer[i] & 0xff);
530 }
531
532 /* Add the last "chunk" of data. */
533 from = (length - 1) % 16;
534 base = ((length - 1) / 16) * 16;
535
536 for (i = from + 1; i < 16; i++)
537 offset += sprintf (line+offset, " ");
538 if (from < 8)
539 offset += sprintf (line+offset, " ");
540 offset += sprintf (line+offset, " - ");
541
542 for (i = 0; i <= from; i++) {
543 if (buffer[base+i] >= 32 && buffer[base+i] <= 126)
544 line[offset++] = buffer[base+i];
545 else
546 line[offset++] = '.';
547 }
548 line[offset] = 0;
549 usb_stor_dbg(us, "%s\n", line);
550 offset = 0;
551}
552#endif
553
554static struct scsi_host_template freecom_host_template;
555
556static int freecom_probe(struct usb_interface *intf,
557 const struct usb_device_id *id)
558{
559 struct us_data *us;
560 int result;
561
562 result = usb_stor_probe1(&us, intf, id,
563 (id - freecom_usb_ids) + freecom_unusual_dev_list,
564 &freecom_host_template);
565 if (result)
566 return result;
567
568 us->transport_name = "Freecom";
569 us->transport = freecom_transport;
570 us->transport_reset = usb_stor_freecom_reset;
571 us->max_lun = 0;
572
573 result = usb_stor_probe2(us);
574 return result;
575}
576
577static struct usb_driver freecom_driver = {
578 .name = DRV_NAME,
579 .probe = freecom_probe,
580 .disconnect = usb_stor_disconnect,
581 .suspend = usb_stor_suspend,
582 .resume = usb_stor_resume,
583 .reset_resume = usb_stor_reset_resume,
584 .pre_reset = usb_stor_pre_reset,
585 .post_reset = usb_stor_post_reset,
586 .id_table = freecom_usb_ids,
587 .soft_unbind = 1,
588 .no_dynamic_id = 1,
589};
590
591module_usb_stor_driver(freecom_driver, freecom_host_template, DRV_NAME);