Loading...
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Native support for the I/O-Warrior USB devices
4 *
5 * Copyright (c) 2003-2005, 2020 Code Mercenaries GmbH
6 * written by Christian Lucht <lucht@codemercs.com> and
7 * Christoph Jung <jung@codemercs.com>
8 *
9 * based on
10
11 * usb-skeleton.c by Greg Kroah-Hartman <greg@kroah.com>
12 * brlvger.c by Stephane Dalton <sdalton@videotron.ca>
13 * and Stephane Doyon <s.doyon@videotron.ca>
14 *
15 * Released under the GPLv2.
16 */
17
18#include <linux/module.h>
19#include <linux/usb.h>
20#include <linux/slab.h>
21#include <linux/sched.h>
22#include <linux/mutex.h>
23#include <linux/poll.h>
24#include <linux/usb/iowarrior.h>
25
26#define DRIVER_AUTHOR "Christian Lucht <lucht@codemercs.com>"
27#define DRIVER_DESC "USB IO-Warrior driver"
28
29#define USB_VENDOR_ID_CODEMERCS 1984
30/* low speed iowarrior */
31#define USB_DEVICE_ID_CODEMERCS_IOW40 0x1500
32#define USB_DEVICE_ID_CODEMERCS_IOW24 0x1501
33#define USB_DEVICE_ID_CODEMERCS_IOWPV1 0x1511
34#define USB_DEVICE_ID_CODEMERCS_IOWPV2 0x1512
35/* full speed iowarrior */
36#define USB_DEVICE_ID_CODEMERCS_IOW56 0x1503
37/* fuller speed iowarrior */
38#define USB_DEVICE_ID_CODEMERCS_IOW28 0x1504
39#define USB_DEVICE_ID_CODEMERCS_IOW28L 0x1505
40#define USB_DEVICE_ID_CODEMERCS_IOW100 0x1506
41
42/* OEMed devices */
43#define USB_DEVICE_ID_CODEMERCS_IOW24SAG 0x158a
44#define USB_DEVICE_ID_CODEMERCS_IOW56AM 0x158b
45
46/* Get a minor range for your devices from the usb maintainer */
47#ifdef CONFIG_USB_DYNAMIC_MINORS
48#define IOWARRIOR_MINOR_BASE 0
49#else
50#define IOWARRIOR_MINOR_BASE 208 // SKELETON_MINOR_BASE 192 + 16, not official yet
51#endif
52
53/* interrupt input queue size */
54#define MAX_INTERRUPT_BUFFER 16
55/*
56 maximum number of urbs that are submitted for writes at the same time,
57 this applies to the IOWarrior56 only!
58 IOWarrior24 and IOWarrior40 use synchronous usb_control_msg calls.
59*/
60#define MAX_WRITES_IN_FLIGHT 4
61
62MODULE_AUTHOR(DRIVER_AUTHOR);
63MODULE_DESCRIPTION(DRIVER_DESC);
64MODULE_LICENSE("GPL");
65
66static struct usb_driver iowarrior_driver;
67
68/*--------------*/
69/* data */
70/*--------------*/
71
72/* Structure to hold all of our device specific stuff */
73struct iowarrior {
74 struct mutex mutex; /* locks this structure */
75 struct usb_device *udev; /* save off the usb device pointer */
76 struct usb_interface *interface; /* the interface for this device */
77 unsigned char minor; /* the starting minor number for this device */
78 struct usb_endpoint_descriptor *int_out_endpoint; /* endpoint for reading (needed for IOW56 only) */
79 struct usb_endpoint_descriptor *int_in_endpoint; /* endpoint for reading */
80 struct urb *int_in_urb; /* the urb for reading data */
81 unsigned char *int_in_buffer; /* buffer for data to be read */
82 unsigned char serial_number; /* to detect lost packages */
83 unsigned char *read_queue; /* size is MAX_INTERRUPT_BUFFER * packet size */
84 wait_queue_head_t read_wait;
85 wait_queue_head_t write_wait; /* wait-queue for writing to the device */
86 atomic_t write_busy; /* number of write-urbs submitted */
87 atomic_t read_idx;
88 atomic_t intr_idx;
89 atomic_t overflow_flag; /* signals an index 'rollover' */
90 int present; /* this is 1 as long as the device is connected */
91 int opened; /* this is 1 if the device is currently open */
92 char chip_serial[9]; /* the serial number string of the chip connected */
93 int report_size; /* number of bytes in a report */
94 u16 product_id;
95 struct usb_anchor submitted;
96};
97
98/*--------------*/
99/* globals */
100/*--------------*/
101
102#define USB_REQ_GET_REPORT 0x01
103//#if 0
104static int usb_get_report(struct usb_device *dev,
105 struct usb_host_interface *inter, unsigned char type,
106 unsigned char id, void *buf, int size)
107{
108 return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
109 USB_REQ_GET_REPORT,
110 USB_DIR_IN | USB_TYPE_CLASS |
111 USB_RECIP_INTERFACE, (type << 8) + id,
112 inter->desc.bInterfaceNumber, buf, size,
113 USB_CTRL_GET_TIMEOUT);
114}
115//#endif
116
117#define USB_REQ_SET_REPORT 0x09
118
119static int usb_set_report(struct usb_interface *intf, unsigned char type,
120 unsigned char id, void *buf, int size)
121{
122 return usb_control_msg(interface_to_usbdev(intf),
123 usb_sndctrlpipe(interface_to_usbdev(intf), 0),
124 USB_REQ_SET_REPORT,
125 USB_TYPE_CLASS | USB_RECIP_INTERFACE,
126 (type << 8) + id,
127 intf->cur_altsetting->desc.bInterfaceNumber, buf,
128 size, 1000);
129}
130
131/*---------------------*/
132/* driver registration */
133/*---------------------*/
134/* table of devices that work with this driver */
135static const struct usb_device_id iowarrior_ids[] = {
136 {USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW40)},
137 {USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW24)},
138 {USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOWPV1)},
139 {USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOWPV2)},
140 {USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW56)},
141 {USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW24SAG)},
142 {USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW56AM)},
143 {USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW28)},
144 {USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW28L)},
145 {USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW100)},
146 {} /* Terminating entry */
147};
148MODULE_DEVICE_TABLE(usb, iowarrior_ids);
149
150/*
151 * USB callback handler for reading data
152 */
153static void iowarrior_callback(struct urb *urb)
154{
155 struct iowarrior *dev = urb->context;
156 int intr_idx;
157 int read_idx;
158 int aux_idx;
159 int offset;
160 int status = urb->status;
161 int retval;
162
163 switch (status) {
164 case 0:
165 /* success */
166 break;
167 case -ECONNRESET:
168 case -ENOENT:
169 case -ESHUTDOWN:
170 return;
171 default:
172 goto exit;
173 }
174
175 intr_idx = atomic_read(&dev->intr_idx);
176 /* aux_idx become previous intr_idx */
177 aux_idx = (intr_idx == 0) ? (MAX_INTERRUPT_BUFFER - 1) : (intr_idx - 1);
178 read_idx = atomic_read(&dev->read_idx);
179
180 /* queue is not empty and it's interface 0 */
181 if ((intr_idx != read_idx)
182 && (dev->interface->cur_altsetting->desc.bInterfaceNumber == 0)) {
183 /* + 1 for serial number */
184 offset = aux_idx * (dev->report_size + 1);
185 if (!memcmp
186 (dev->read_queue + offset, urb->transfer_buffer,
187 dev->report_size)) {
188 /* equal values on interface 0 will be ignored */
189 goto exit;
190 }
191 }
192
193 /* aux_idx become next intr_idx */
194 aux_idx = (intr_idx == (MAX_INTERRUPT_BUFFER - 1)) ? 0 : (intr_idx + 1);
195 if (read_idx == aux_idx) {
196 /* queue full, dropping oldest input */
197 read_idx = (++read_idx == MAX_INTERRUPT_BUFFER) ? 0 : read_idx;
198 atomic_set(&dev->read_idx, read_idx);
199 atomic_set(&dev->overflow_flag, 1);
200 }
201
202 /* +1 for serial number */
203 offset = intr_idx * (dev->report_size + 1);
204 memcpy(dev->read_queue + offset, urb->transfer_buffer,
205 dev->report_size);
206 *(dev->read_queue + offset + (dev->report_size)) = dev->serial_number++;
207
208 atomic_set(&dev->intr_idx, aux_idx);
209 /* tell the blocking read about the new data */
210 wake_up_interruptible(&dev->read_wait);
211
212exit:
213 retval = usb_submit_urb(urb, GFP_ATOMIC);
214 if (retval)
215 dev_err(&dev->interface->dev, "%s - usb_submit_urb failed with result %d\n",
216 __func__, retval);
217
218}
219
220/*
221 * USB Callback handler for write-ops
222 */
223static void iowarrior_write_callback(struct urb *urb)
224{
225 struct iowarrior *dev;
226 int status = urb->status;
227
228 dev = urb->context;
229 /* sync/async unlink faults aren't errors */
230 if (status &&
231 !(status == -ENOENT ||
232 status == -ECONNRESET || status == -ESHUTDOWN)) {
233 dev_dbg(&dev->interface->dev,
234 "nonzero write bulk status received: %d\n", status);
235 }
236 /* free up our allocated buffer */
237 usb_free_coherent(urb->dev, urb->transfer_buffer_length,
238 urb->transfer_buffer, urb->transfer_dma);
239 /* tell a waiting writer the interrupt-out-pipe is available again */
240 atomic_dec(&dev->write_busy);
241 wake_up_interruptible(&dev->write_wait);
242}
243
244/*
245 * iowarrior_delete
246 */
247static inline void iowarrior_delete(struct iowarrior *dev)
248{
249 dev_dbg(&dev->interface->dev, "minor %d\n", dev->minor);
250 kfree(dev->int_in_buffer);
251 usb_free_urb(dev->int_in_urb);
252 kfree(dev->read_queue);
253 usb_put_intf(dev->interface);
254 kfree(dev);
255}
256
257/*---------------------*/
258/* fops implementation */
259/*---------------------*/
260
261static int read_index(struct iowarrior *dev)
262{
263 int intr_idx, read_idx;
264
265 read_idx = atomic_read(&dev->read_idx);
266 intr_idx = atomic_read(&dev->intr_idx);
267
268 return (read_idx == intr_idx ? -1 : read_idx);
269}
270
271/*
272 * iowarrior_read
273 */
274static ssize_t iowarrior_read(struct file *file, char __user *buffer,
275 size_t count, loff_t *ppos)
276{
277 struct iowarrior *dev;
278 int read_idx;
279 int offset;
280
281 dev = file->private_data;
282
283 /* verify that the device wasn't unplugged */
284 if (!dev || !dev->present)
285 return -ENODEV;
286
287 dev_dbg(&dev->interface->dev, "minor %d, count = %zd\n",
288 dev->minor, count);
289
290 /* read count must be packet size (+ time stamp) */
291 if ((count != dev->report_size)
292 && (count != (dev->report_size + 1)))
293 return -EINVAL;
294
295 /* repeat until no buffer overrun in callback handler occur */
296 do {
297 atomic_set(&dev->overflow_flag, 0);
298 if ((read_idx = read_index(dev)) == -1) {
299 /* queue empty */
300 if (file->f_flags & O_NONBLOCK)
301 return -EAGAIN;
302 else {
303 //next line will return when there is either new data, or the device is unplugged
304 int r = wait_event_interruptible(dev->read_wait,
305 (!dev->present
306 || (read_idx =
307 read_index
308 (dev)) !=
309 -1));
310 if (r) {
311 //we were interrupted by a signal
312 return -ERESTART;
313 }
314 if (!dev->present) {
315 //The device was unplugged
316 return -ENODEV;
317 }
318 if (read_idx == -1) {
319 // Can this happen ???
320 return 0;
321 }
322 }
323 }
324
325 offset = read_idx * (dev->report_size + 1);
326 if (copy_to_user(buffer, dev->read_queue + offset, count)) {
327 return -EFAULT;
328 }
329 } while (atomic_read(&dev->overflow_flag));
330
331 read_idx = ++read_idx == MAX_INTERRUPT_BUFFER ? 0 : read_idx;
332 atomic_set(&dev->read_idx, read_idx);
333 return count;
334}
335
336/*
337 * iowarrior_write
338 */
339static ssize_t iowarrior_write(struct file *file,
340 const char __user *user_buffer,
341 size_t count, loff_t *ppos)
342{
343 struct iowarrior *dev;
344 int retval = 0;
345 char *buf = NULL; /* for IOW24 and IOW56 we need a buffer */
346 struct urb *int_out_urb = NULL;
347
348 dev = file->private_data;
349
350 mutex_lock(&dev->mutex);
351 /* verify that the device wasn't unplugged */
352 if (!dev->present) {
353 retval = -ENODEV;
354 goto exit;
355 }
356 dev_dbg(&dev->interface->dev, "minor %d, count = %zd\n",
357 dev->minor, count);
358 /* if count is 0 we're already done */
359 if (count == 0) {
360 retval = 0;
361 goto exit;
362 }
363 /* We only accept full reports */
364 if (count != dev->report_size) {
365 retval = -EINVAL;
366 goto exit;
367 }
368 switch (dev->product_id) {
369 case USB_DEVICE_ID_CODEMERCS_IOW24:
370 case USB_DEVICE_ID_CODEMERCS_IOW24SAG:
371 case USB_DEVICE_ID_CODEMERCS_IOWPV1:
372 case USB_DEVICE_ID_CODEMERCS_IOWPV2:
373 case USB_DEVICE_ID_CODEMERCS_IOW40:
374 /* IOW24 and IOW40 use a synchronous call */
375 buf = memdup_user(user_buffer, count);
376 if (IS_ERR(buf)) {
377 retval = PTR_ERR(buf);
378 goto exit;
379 }
380 retval = usb_set_report(dev->interface, 2, 0, buf, count);
381 kfree(buf);
382 goto exit;
383 case USB_DEVICE_ID_CODEMERCS_IOW56:
384 case USB_DEVICE_ID_CODEMERCS_IOW56AM:
385 case USB_DEVICE_ID_CODEMERCS_IOW28:
386 case USB_DEVICE_ID_CODEMERCS_IOW28L:
387 case USB_DEVICE_ID_CODEMERCS_IOW100:
388 /* The IOW56 uses asynchronous IO and more urbs */
389 if (atomic_read(&dev->write_busy) == MAX_WRITES_IN_FLIGHT) {
390 /* Wait until we are below the limit for submitted urbs */
391 if (file->f_flags & O_NONBLOCK) {
392 retval = -EAGAIN;
393 goto exit;
394 } else {
395 retval = wait_event_interruptible(dev->write_wait,
396 (!dev->present || (atomic_read (&dev-> write_busy) < MAX_WRITES_IN_FLIGHT)));
397 if (retval) {
398 /* we were interrupted by a signal */
399 retval = -ERESTART;
400 goto exit;
401 }
402 if (!dev->present) {
403 /* The device was unplugged */
404 retval = -ENODEV;
405 goto exit;
406 }
407 if (!dev->opened) {
408 /* We were closed while waiting for an URB */
409 retval = -ENODEV;
410 goto exit;
411 }
412 }
413 }
414 atomic_inc(&dev->write_busy);
415 int_out_urb = usb_alloc_urb(0, GFP_KERNEL);
416 if (!int_out_urb) {
417 retval = -ENOMEM;
418 goto error_no_urb;
419 }
420 buf = usb_alloc_coherent(dev->udev, dev->report_size,
421 GFP_KERNEL, &int_out_urb->transfer_dma);
422 if (!buf) {
423 retval = -ENOMEM;
424 dev_dbg(&dev->interface->dev,
425 "Unable to allocate buffer\n");
426 goto error_no_buffer;
427 }
428 usb_fill_int_urb(int_out_urb, dev->udev,
429 usb_sndintpipe(dev->udev,
430 dev->int_out_endpoint->bEndpointAddress),
431 buf, dev->report_size,
432 iowarrior_write_callback, dev,
433 dev->int_out_endpoint->bInterval);
434 int_out_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
435 if (copy_from_user(buf, user_buffer, count)) {
436 retval = -EFAULT;
437 goto error;
438 }
439 usb_anchor_urb(int_out_urb, &dev->submitted);
440 retval = usb_submit_urb(int_out_urb, GFP_KERNEL);
441 if (retval) {
442 dev_dbg(&dev->interface->dev,
443 "submit error %d for urb nr.%d\n",
444 retval, atomic_read(&dev->write_busy));
445 usb_unanchor_urb(int_out_urb);
446 goto error;
447 }
448 /* submit was ok */
449 retval = count;
450 usb_free_urb(int_out_urb);
451 goto exit;
452 default:
453 /* what do we have here ? An unsupported Product-ID ? */
454 dev_err(&dev->interface->dev, "%s - not supported for product=0x%x\n",
455 __func__, dev->product_id);
456 retval = -EFAULT;
457 goto exit;
458 }
459error:
460 usb_free_coherent(dev->udev, dev->report_size, buf,
461 int_out_urb->transfer_dma);
462error_no_buffer:
463 usb_free_urb(int_out_urb);
464error_no_urb:
465 atomic_dec(&dev->write_busy);
466 wake_up_interruptible(&dev->write_wait);
467exit:
468 mutex_unlock(&dev->mutex);
469 return retval;
470}
471
472/*
473 * iowarrior_ioctl
474 */
475static long iowarrior_ioctl(struct file *file, unsigned int cmd,
476 unsigned long arg)
477{
478 struct iowarrior *dev = NULL;
479 __u8 *buffer;
480 __u8 __user *user_buffer;
481 int retval;
482 int io_res; /* checks for bytes read/written and copy_to/from_user results */
483
484 dev = file->private_data;
485 if (!dev)
486 return -ENODEV;
487
488 buffer = kzalloc(dev->report_size, GFP_KERNEL);
489 if (!buffer)
490 return -ENOMEM;
491
492 mutex_lock(&dev->mutex);
493
494 /* verify that the device wasn't unplugged */
495 if (!dev->present) {
496 retval = -ENODEV;
497 goto error_out;
498 }
499
500 dev_dbg(&dev->interface->dev, "minor %d, cmd 0x%.4x, arg %ld\n",
501 dev->minor, cmd, arg);
502
503 retval = 0;
504 switch (cmd) {
505 case IOW_WRITE:
506 if (dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW24 ||
507 dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW24SAG ||
508 dev->product_id == USB_DEVICE_ID_CODEMERCS_IOWPV1 ||
509 dev->product_id == USB_DEVICE_ID_CODEMERCS_IOWPV2 ||
510 dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW40) {
511 user_buffer = (__u8 __user *)arg;
512 io_res = copy_from_user(buffer, user_buffer,
513 dev->report_size);
514 if (io_res) {
515 retval = -EFAULT;
516 } else {
517 io_res = usb_set_report(dev->interface, 2, 0,
518 buffer,
519 dev->report_size);
520 if (io_res < 0)
521 retval = io_res;
522 }
523 } else {
524 retval = -EINVAL;
525 dev_err(&dev->interface->dev,
526 "ioctl 'IOW_WRITE' is not supported for product=0x%x.\n",
527 dev->product_id);
528 }
529 break;
530 case IOW_READ:
531 user_buffer = (__u8 __user *)arg;
532 io_res = usb_get_report(dev->udev,
533 dev->interface->cur_altsetting, 1, 0,
534 buffer, dev->report_size);
535 if (io_res < 0)
536 retval = io_res;
537 else {
538 io_res = copy_to_user(user_buffer, buffer, dev->report_size);
539 if (io_res)
540 retval = -EFAULT;
541 }
542 break;
543 case IOW_GETINFO:
544 {
545 /* Report available information for the device */
546 struct iowarrior_info info;
547 /* needed for power consumption */
548 struct usb_config_descriptor *cfg_descriptor = &dev->udev->actconfig->desc;
549
550 memset(&info, 0, sizeof(info));
551 /* directly from the descriptor */
552 info.vendor = le16_to_cpu(dev->udev->descriptor.idVendor);
553 info.product = dev->product_id;
554 info.revision = le16_to_cpu(dev->udev->descriptor.bcdDevice);
555
556 /* 0==UNKNOWN, 1==LOW(usb1.1) ,2=FULL(usb1.1), 3=HIGH(usb2.0) */
557 info.speed = dev->udev->speed;
558 info.if_num = dev->interface->cur_altsetting->desc.bInterfaceNumber;
559 info.report_size = dev->report_size;
560
561 /* serial number string has been read earlier 8 chars or empty string */
562 memcpy(info.serial, dev->chip_serial,
563 sizeof(dev->chip_serial));
564 if (cfg_descriptor == NULL) {
565 info.power = -1; /* no information available */
566 } else {
567 /* the MaxPower is stored in units of 2mA to make it fit into a byte-value */
568 info.power = cfg_descriptor->bMaxPower * 2;
569 }
570 io_res = copy_to_user((struct iowarrior_info __user *)arg, &info,
571 sizeof(struct iowarrior_info));
572 if (io_res)
573 retval = -EFAULT;
574 break;
575 }
576 default:
577 /* return that we did not understand this ioctl call */
578 retval = -ENOTTY;
579 break;
580 }
581error_out:
582 /* unlock the device */
583 mutex_unlock(&dev->mutex);
584 kfree(buffer);
585 return retval;
586}
587
588/*
589 * iowarrior_open
590 */
591static int iowarrior_open(struct inode *inode, struct file *file)
592{
593 struct iowarrior *dev = NULL;
594 struct usb_interface *interface;
595 int subminor;
596 int retval = 0;
597
598 subminor = iminor(inode);
599
600 interface = usb_find_interface(&iowarrior_driver, subminor);
601 if (!interface) {
602 pr_err("%s - error, can't find device for minor %d\n",
603 __func__, subminor);
604 return -ENODEV;
605 }
606
607 dev = usb_get_intfdata(interface);
608 if (!dev)
609 return -ENODEV;
610
611 mutex_lock(&dev->mutex);
612
613 /* Only one process can open each device, no sharing. */
614 if (dev->opened) {
615 retval = -EBUSY;
616 goto out;
617 }
618
619 /* setup interrupt handler for receiving values */
620 if ((retval = usb_submit_urb(dev->int_in_urb, GFP_KERNEL)) < 0) {
621 dev_err(&interface->dev, "Error %d while submitting URB\n", retval);
622 retval = -EFAULT;
623 goto out;
624 }
625 /* increment our usage count for the driver */
626 ++dev->opened;
627 /* save our object in the file's private structure */
628 file->private_data = dev;
629 retval = 0;
630
631out:
632 mutex_unlock(&dev->mutex);
633 return retval;
634}
635
636/*
637 * iowarrior_release
638 */
639static int iowarrior_release(struct inode *inode, struct file *file)
640{
641 struct iowarrior *dev;
642 int retval = 0;
643
644 dev = file->private_data;
645 if (!dev)
646 return -ENODEV;
647
648 dev_dbg(&dev->interface->dev, "minor %d\n", dev->minor);
649
650 /* lock our device */
651 mutex_lock(&dev->mutex);
652
653 if (dev->opened <= 0) {
654 retval = -ENODEV; /* close called more than once */
655 mutex_unlock(&dev->mutex);
656 } else {
657 dev->opened = 0; /* we're closing now */
658 retval = 0;
659 if (dev->present) {
660 /*
661 The device is still connected so we only shutdown
662 pending read-/write-ops.
663 */
664 usb_kill_urb(dev->int_in_urb);
665 wake_up_interruptible(&dev->read_wait);
666 wake_up_interruptible(&dev->write_wait);
667 mutex_unlock(&dev->mutex);
668 } else {
669 /* The device was unplugged, cleanup resources */
670 mutex_unlock(&dev->mutex);
671 iowarrior_delete(dev);
672 }
673 }
674 return retval;
675}
676
677static __poll_t iowarrior_poll(struct file *file, poll_table * wait)
678{
679 struct iowarrior *dev = file->private_data;
680 __poll_t mask = 0;
681
682 if (!dev->present)
683 return EPOLLERR | EPOLLHUP;
684
685 poll_wait(file, &dev->read_wait, wait);
686 poll_wait(file, &dev->write_wait, wait);
687
688 if (!dev->present)
689 return EPOLLERR | EPOLLHUP;
690
691 if (read_index(dev) != -1)
692 mask |= EPOLLIN | EPOLLRDNORM;
693
694 if (atomic_read(&dev->write_busy) < MAX_WRITES_IN_FLIGHT)
695 mask |= EPOLLOUT | EPOLLWRNORM;
696 return mask;
697}
698
699/*
700 * File operations needed when we register this driver.
701 * This assumes that this driver NEEDS file operations,
702 * of course, which means that the driver is expected
703 * to have a node in the /dev directory. If the USB
704 * device were for a network interface then the driver
705 * would use "struct net_driver" instead, and a serial
706 * device would use "struct tty_driver".
707 */
708static const struct file_operations iowarrior_fops = {
709 .owner = THIS_MODULE,
710 .write = iowarrior_write,
711 .read = iowarrior_read,
712 .unlocked_ioctl = iowarrior_ioctl,
713 .open = iowarrior_open,
714 .release = iowarrior_release,
715 .poll = iowarrior_poll,
716 .llseek = noop_llseek,
717};
718
719static char *iowarrior_devnode(const struct device *dev, umode_t *mode)
720{
721 return kasprintf(GFP_KERNEL, "usb/%s", dev_name(dev));
722}
723
724/*
725 * usb class driver info in order to get a minor number from the usb core,
726 * and to have the device registered with devfs and the driver core
727 */
728static struct usb_class_driver iowarrior_class = {
729 .name = "iowarrior%d",
730 .devnode = iowarrior_devnode,
731 .fops = &iowarrior_fops,
732 .minor_base = IOWARRIOR_MINOR_BASE,
733};
734
735/*---------------------------------*/
736/* probe and disconnect functions */
737/*---------------------------------*/
738/*
739 * iowarrior_probe
740 *
741 * Called by the usb core when a new device is connected that it thinks
742 * this driver might be interested in.
743 */
744static int iowarrior_probe(struct usb_interface *interface,
745 const struct usb_device_id *id)
746{
747 struct usb_device *udev = interface_to_usbdev(interface);
748 struct iowarrior *dev = NULL;
749 struct usb_host_interface *iface_desc;
750 int retval = -ENOMEM;
751 int res;
752
753 /* allocate memory for our device state and initialize it */
754 dev = kzalloc(sizeof(struct iowarrior), GFP_KERNEL);
755 if (!dev)
756 return retval;
757
758 mutex_init(&dev->mutex);
759
760 atomic_set(&dev->intr_idx, 0);
761 atomic_set(&dev->read_idx, 0);
762 atomic_set(&dev->overflow_flag, 0);
763 init_waitqueue_head(&dev->read_wait);
764 atomic_set(&dev->write_busy, 0);
765 init_waitqueue_head(&dev->write_wait);
766
767 dev->udev = udev;
768 dev->interface = usb_get_intf(interface);
769
770 iface_desc = interface->cur_altsetting;
771 dev->product_id = le16_to_cpu(udev->descriptor.idProduct);
772
773 init_usb_anchor(&dev->submitted);
774
775 res = usb_find_last_int_in_endpoint(iface_desc, &dev->int_in_endpoint);
776 if (res) {
777 dev_err(&interface->dev, "no interrupt-in endpoint found\n");
778 retval = res;
779 goto error;
780 }
781
782 if ((dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW56) ||
783 (dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW56AM) ||
784 (dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW28) ||
785 (dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW28L) ||
786 (dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW100)) {
787 res = usb_find_last_int_out_endpoint(iface_desc,
788 &dev->int_out_endpoint);
789 if (res) {
790 dev_err(&interface->dev, "no interrupt-out endpoint found\n");
791 retval = res;
792 goto error;
793 }
794 }
795
796 /* we have to check the report_size often, so remember it in the endianness suitable for our machine */
797 dev->report_size = usb_endpoint_maxp(dev->int_in_endpoint);
798
799 /*
800 * Some devices need the report size to be different than the
801 * endpoint size.
802 */
803 if (dev->interface->cur_altsetting->desc.bInterfaceNumber == 0) {
804 switch (dev->product_id) {
805 case USB_DEVICE_ID_CODEMERCS_IOW56:
806 case USB_DEVICE_ID_CODEMERCS_IOW56AM:
807 dev->report_size = 7;
808 break;
809
810 case USB_DEVICE_ID_CODEMERCS_IOW28:
811 case USB_DEVICE_ID_CODEMERCS_IOW28L:
812 dev->report_size = 4;
813 break;
814
815 case USB_DEVICE_ID_CODEMERCS_IOW100:
816 dev->report_size = 12;
817 break;
818 }
819 }
820
821 /* create the urb and buffer for reading */
822 dev->int_in_urb = usb_alloc_urb(0, GFP_KERNEL);
823 if (!dev->int_in_urb)
824 goto error;
825 dev->int_in_buffer = kmalloc(dev->report_size, GFP_KERNEL);
826 if (!dev->int_in_buffer)
827 goto error;
828 usb_fill_int_urb(dev->int_in_urb, dev->udev,
829 usb_rcvintpipe(dev->udev,
830 dev->int_in_endpoint->bEndpointAddress),
831 dev->int_in_buffer, dev->report_size,
832 iowarrior_callback, dev,
833 dev->int_in_endpoint->bInterval);
834 /* create an internal buffer for interrupt data from the device */
835 dev->read_queue =
836 kmalloc_array(dev->report_size + 1, MAX_INTERRUPT_BUFFER,
837 GFP_KERNEL);
838 if (!dev->read_queue)
839 goto error;
840 /* Get the serial-number of the chip */
841 memset(dev->chip_serial, 0x00, sizeof(dev->chip_serial));
842 usb_string(udev, udev->descriptor.iSerialNumber, dev->chip_serial,
843 sizeof(dev->chip_serial));
844 if (strlen(dev->chip_serial) != 8)
845 memset(dev->chip_serial, 0x00, sizeof(dev->chip_serial));
846
847 /* Set the idle timeout to 0, if this is interface 0 */
848 if (dev->interface->cur_altsetting->desc.bInterfaceNumber == 0) {
849 usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
850 0x0A,
851 USB_TYPE_CLASS | USB_RECIP_INTERFACE, 0,
852 0, NULL, 0, USB_CTRL_SET_TIMEOUT);
853 }
854 /* allow device read and ioctl */
855 dev->present = 1;
856
857 /* we can register the device now, as it is ready */
858 usb_set_intfdata(interface, dev);
859
860 retval = usb_register_dev(interface, &iowarrior_class);
861 if (retval) {
862 /* something prevented us from registering this driver */
863 dev_err(&interface->dev, "Not able to get a minor for this device.\n");
864 goto error;
865 }
866
867 dev->minor = interface->minor;
868
869 /* let the user know what node this device is now attached to */
870 dev_info(&interface->dev, "IOWarrior product=0x%x, serial=%s interface=%d "
871 "now attached to iowarrior%d\n", dev->product_id, dev->chip_serial,
872 iface_desc->desc.bInterfaceNumber, dev->minor - IOWARRIOR_MINOR_BASE);
873 return retval;
874
875error:
876 iowarrior_delete(dev);
877 return retval;
878}
879
880/*
881 * iowarrior_disconnect
882 *
883 * Called by the usb core when the device is removed from the system.
884 */
885static void iowarrior_disconnect(struct usb_interface *interface)
886{
887 struct iowarrior *dev = usb_get_intfdata(interface);
888 int minor = dev->minor;
889
890 usb_deregister_dev(interface, &iowarrior_class);
891
892 mutex_lock(&dev->mutex);
893
894 /* prevent device read, write and ioctl */
895 dev->present = 0;
896
897 if (dev->opened) {
898 /* There is a process that holds a filedescriptor to the device ,
899 so we only shutdown read-/write-ops going on.
900 Deleting the device is postponed until close() was called.
901 */
902 usb_kill_urb(dev->int_in_urb);
903 usb_kill_anchored_urbs(&dev->submitted);
904 wake_up_interruptible(&dev->read_wait);
905 wake_up_interruptible(&dev->write_wait);
906 mutex_unlock(&dev->mutex);
907 } else {
908 /* no process is using the device, cleanup now */
909 mutex_unlock(&dev->mutex);
910 iowarrior_delete(dev);
911 }
912
913 dev_info(&interface->dev, "I/O-Warror #%d now disconnected\n",
914 minor - IOWARRIOR_MINOR_BASE);
915}
916
917/* usb specific object needed to register this driver with the usb subsystem */
918static struct usb_driver iowarrior_driver = {
919 .name = "iowarrior",
920 .probe = iowarrior_probe,
921 .disconnect = iowarrior_disconnect,
922 .id_table = iowarrior_ids,
923};
924
925module_usb_driver(iowarrior_driver);
1/*
2 * Native support for the I/O-Warrior USB devices
3 *
4 * Copyright (c) 2003-2005 Code Mercenaries GmbH
5 * written by Christian Lucht <lucht@codemercs.com>
6 *
7 * based on
8
9 * usb-skeleton.c by Greg Kroah-Hartman <greg@kroah.com>
10 * brlvger.c by Stephane Dalton <sdalton@videotron.ca>
11 * and St�hane Doyon <s.doyon@videotron.ca>
12 *
13 * Released under the GPLv2.
14 */
15
16#include <linux/module.h>
17#include <linux/usb.h>
18#include <linux/slab.h>
19#include <linux/sched.h>
20#include <linux/mutex.h>
21#include <linux/poll.h>
22#include <linux/usb/iowarrior.h>
23
24/* Version Information */
25#define DRIVER_VERSION "v0.4.0"
26#define DRIVER_AUTHOR "Christian Lucht <lucht@codemercs.com>"
27#define DRIVER_DESC "USB IO-Warrior driver (Linux 2.6.x)"
28
29#define USB_VENDOR_ID_CODEMERCS 1984
30/* low speed iowarrior */
31#define USB_DEVICE_ID_CODEMERCS_IOW40 0x1500
32#define USB_DEVICE_ID_CODEMERCS_IOW24 0x1501
33#define USB_DEVICE_ID_CODEMERCS_IOWPV1 0x1511
34#define USB_DEVICE_ID_CODEMERCS_IOWPV2 0x1512
35/* full speed iowarrior */
36#define USB_DEVICE_ID_CODEMERCS_IOW56 0x1503
37
38/* Get a minor range for your devices from the usb maintainer */
39#ifdef CONFIG_USB_DYNAMIC_MINORS
40#define IOWARRIOR_MINOR_BASE 0
41#else
42#define IOWARRIOR_MINOR_BASE 208 // SKELETON_MINOR_BASE 192 + 16, not official yet
43#endif
44
45/* interrupt input queue size */
46#define MAX_INTERRUPT_BUFFER 16
47/*
48 maximum number of urbs that are submitted for writes at the same time,
49 this applies to the IOWarrior56 only!
50 IOWarrior24 and IOWarrior40 use synchronous usb_control_msg calls.
51*/
52#define MAX_WRITES_IN_FLIGHT 4
53
54MODULE_AUTHOR(DRIVER_AUTHOR);
55MODULE_DESCRIPTION(DRIVER_DESC);
56MODULE_LICENSE("GPL");
57
58/* Module parameters */
59static DEFINE_MUTEX(iowarrior_mutex);
60
61static struct usb_driver iowarrior_driver;
62static DEFINE_MUTEX(iowarrior_open_disc_lock);
63
64/*--------------*/
65/* data */
66/*--------------*/
67
68/* Structure to hold all of our device specific stuff */
69struct iowarrior {
70 struct mutex mutex; /* locks this structure */
71 struct usb_device *udev; /* save off the usb device pointer */
72 struct usb_interface *interface; /* the interface for this device */
73 unsigned char minor; /* the starting minor number for this device */
74 struct usb_endpoint_descriptor *int_out_endpoint; /* endpoint for reading (needed for IOW56 only) */
75 struct usb_endpoint_descriptor *int_in_endpoint; /* endpoint for reading */
76 struct urb *int_in_urb; /* the urb for reading data */
77 unsigned char *int_in_buffer; /* buffer for data to be read */
78 unsigned char serial_number; /* to detect lost packages */
79 unsigned char *read_queue; /* size is MAX_INTERRUPT_BUFFER * packet size */
80 wait_queue_head_t read_wait;
81 wait_queue_head_t write_wait; /* wait-queue for writing to the device */
82 atomic_t write_busy; /* number of write-urbs submitted */
83 atomic_t read_idx;
84 atomic_t intr_idx;
85 spinlock_t intr_idx_lock; /* protects intr_idx */
86 atomic_t overflow_flag; /* signals an index 'rollover' */
87 int present; /* this is 1 as long as the device is connected */
88 int opened; /* this is 1 if the device is currently open */
89 char chip_serial[9]; /* the serial number string of the chip connected */
90 int report_size; /* number of bytes in a report */
91 u16 product_id;
92};
93
94/*--------------*/
95/* globals */
96/*--------------*/
97
98/*
99 * USB spec identifies 5 second timeouts.
100 */
101#define GET_TIMEOUT 5
102#define USB_REQ_GET_REPORT 0x01
103//#if 0
104static int usb_get_report(struct usb_device *dev,
105 struct usb_host_interface *inter, unsigned char type,
106 unsigned char id, void *buf, int size)
107{
108 return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
109 USB_REQ_GET_REPORT,
110 USB_DIR_IN | USB_TYPE_CLASS |
111 USB_RECIP_INTERFACE, (type << 8) + id,
112 inter->desc.bInterfaceNumber, buf, size,
113 GET_TIMEOUT*HZ);
114}
115//#endif
116
117#define USB_REQ_SET_REPORT 0x09
118
119static int usb_set_report(struct usb_interface *intf, unsigned char type,
120 unsigned char id, void *buf, int size)
121{
122 return usb_control_msg(interface_to_usbdev(intf),
123 usb_sndctrlpipe(interface_to_usbdev(intf), 0),
124 USB_REQ_SET_REPORT,
125 USB_TYPE_CLASS | USB_RECIP_INTERFACE,
126 (type << 8) + id,
127 intf->cur_altsetting->desc.bInterfaceNumber, buf,
128 size, HZ);
129}
130
131/*---------------------*/
132/* driver registration */
133/*---------------------*/
134/* table of devices that work with this driver */
135static const struct usb_device_id iowarrior_ids[] = {
136 {USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW40)},
137 {USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW24)},
138 {USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOWPV1)},
139 {USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOWPV2)},
140 {USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW56)},
141 {} /* Terminating entry */
142};
143MODULE_DEVICE_TABLE(usb, iowarrior_ids);
144
145/*
146 * USB callback handler for reading data
147 */
148static void iowarrior_callback(struct urb *urb)
149{
150 struct iowarrior *dev = urb->context;
151 int intr_idx;
152 int read_idx;
153 int aux_idx;
154 int offset;
155 int status = urb->status;
156 int retval;
157
158 switch (status) {
159 case 0:
160 /* success */
161 break;
162 case -ECONNRESET:
163 case -ENOENT:
164 case -ESHUTDOWN:
165 return;
166 default:
167 goto exit;
168 }
169
170 spin_lock(&dev->intr_idx_lock);
171 intr_idx = atomic_read(&dev->intr_idx);
172 /* aux_idx become previous intr_idx */
173 aux_idx = (intr_idx == 0) ? (MAX_INTERRUPT_BUFFER - 1) : (intr_idx - 1);
174 read_idx = atomic_read(&dev->read_idx);
175
176 /* queue is not empty and it's interface 0 */
177 if ((intr_idx != read_idx)
178 && (dev->interface->cur_altsetting->desc.bInterfaceNumber == 0)) {
179 /* + 1 for serial number */
180 offset = aux_idx * (dev->report_size + 1);
181 if (!memcmp
182 (dev->read_queue + offset, urb->transfer_buffer,
183 dev->report_size)) {
184 /* equal values on interface 0 will be ignored */
185 spin_unlock(&dev->intr_idx_lock);
186 goto exit;
187 }
188 }
189
190 /* aux_idx become next intr_idx */
191 aux_idx = (intr_idx == (MAX_INTERRUPT_BUFFER - 1)) ? 0 : (intr_idx + 1);
192 if (read_idx == aux_idx) {
193 /* queue full, dropping oldest input */
194 read_idx = (++read_idx == MAX_INTERRUPT_BUFFER) ? 0 : read_idx;
195 atomic_set(&dev->read_idx, read_idx);
196 atomic_set(&dev->overflow_flag, 1);
197 }
198
199 /* +1 for serial number */
200 offset = intr_idx * (dev->report_size + 1);
201 memcpy(dev->read_queue + offset, urb->transfer_buffer,
202 dev->report_size);
203 *(dev->read_queue + offset + (dev->report_size)) = dev->serial_number++;
204
205 atomic_set(&dev->intr_idx, aux_idx);
206 spin_unlock(&dev->intr_idx_lock);
207 /* tell the blocking read about the new data */
208 wake_up_interruptible(&dev->read_wait);
209
210exit:
211 retval = usb_submit_urb(urb, GFP_ATOMIC);
212 if (retval)
213 dev_err(&dev->interface->dev, "%s - usb_submit_urb failed with result %d\n",
214 __func__, retval);
215
216}
217
218/*
219 * USB Callback handler for write-ops
220 */
221static void iowarrior_write_callback(struct urb *urb)
222{
223 struct iowarrior *dev;
224 int status = urb->status;
225
226 dev = urb->context;
227 /* sync/async unlink faults aren't errors */
228 if (status &&
229 !(status == -ENOENT ||
230 status == -ECONNRESET || status == -ESHUTDOWN)) {
231 dev_dbg(&dev->interface->dev,
232 "nonzero write bulk status received: %d\n", status);
233 }
234 /* free up our allocated buffer */
235 usb_free_coherent(urb->dev, urb->transfer_buffer_length,
236 urb->transfer_buffer, urb->transfer_dma);
237 /* tell a waiting writer the interrupt-out-pipe is available again */
238 atomic_dec(&dev->write_busy);
239 wake_up_interruptible(&dev->write_wait);
240}
241
242/**
243 * iowarrior_delete
244 */
245static inline void iowarrior_delete(struct iowarrior *dev)
246{
247 dev_dbg(&dev->interface->dev, "minor %d\n", dev->minor);
248 kfree(dev->int_in_buffer);
249 usb_free_urb(dev->int_in_urb);
250 kfree(dev->read_queue);
251 kfree(dev);
252}
253
254/*---------------------*/
255/* fops implementation */
256/*---------------------*/
257
258static int read_index(struct iowarrior *dev)
259{
260 int intr_idx, read_idx;
261
262 read_idx = atomic_read(&dev->read_idx);
263 intr_idx = atomic_read(&dev->intr_idx);
264
265 return (read_idx == intr_idx ? -1 : read_idx);
266}
267
268/**
269 * iowarrior_read
270 */
271static ssize_t iowarrior_read(struct file *file, char __user *buffer,
272 size_t count, loff_t *ppos)
273{
274 struct iowarrior *dev;
275 int read_idx;
276 int offset;
277
278 dev = file->private_data;
279
280 /* verify that the device wasn't unplugged */
281 if (!dev || !dev->present)
282 return -ENODEV;
283
284 dev_dbg(&dev->interface->dev, "minor %d, count = %zd\n",
285 dev->minor, count);
286
287 /* read count must be packet size (+ time stamp) */
288 if ((count != dev->report_size)
289 && (count != (dev->report_size + 1)))
290 return -EINVAL;
291
292 /* repeat until no buffer overrun in callback handler occur */
293 do {
294 atomic_set(&dev->overflow_flag, 0);
295 if ((read_idx = read_index(dev)) == -1) {
296 /* queue empty */
297 if (file->f_flags & O_NONBLOCK)
298 return -EAGAIN;
299 else {
300 //next line will return when there is either new data, or the device is unplugged
301 int r = wait_event_interruptible(dev->read_wait,
302 (!dev->present
303 || (read_idx =
304 read_index
305 (dev)) !=
306 -1));
307 if (r) {
308 //we were interrupted by a signal
309 return -ERESTART;
310 }
311 if (!dev->present) {
312 //The device was unplugged
313 return -ENODEV;
314 }
315 if (read_idx == -1) {
316 // Can this happen ???
317 return 0;
318 }
319 }
320 }
321
322 offset = read_idx * (dev->report_size + 1);
323 if (copy_to_user(buffer, dev->read_queue + offset, count)) {
324 return -EFAULT;
325 }
326 } while (atomic_read(&dev->overflow_flag));
327
328 read_idx = ++read_idx == MAX_INTERRUPT_BUFFER ? 0 : read_idx;
329 atomic_set(&dev->read_idx, read_idx);
330 return count;
331}
332
333/*
334 * iowarrior_write
335 */
336static ssize_t iowarrior_write(struct file *file,
337 const char __user *user_buffer,
338 size_t count, loff_t *ppos)
339{
340 struct iowarrior *dev;
341 int retval = 0;
342 char *buf = NULL; /* for IOW24 and IOW56 we need a buffer */
343 struct urb *int_out_urb = NULL;
344
345 dev = file->private_data;
346
347 mutex_lock(&dev->mutex);
348 /* verify that the device wasn't unplugged */
349 if (!dev->present) {
350 retval = -ENODEV;
351 goto exit;
352 }
353 dev_dbg(&dev->interface->dev, "minor %d, count = %zd\n",
354 dev->minor, count);
355 /* if count is 0 we're already done */
356 if (count == 0) {
357 retval = 0;
358 goto exit;
359 }
360 /* We only accept full reports */
361 if (count != dev->report_size) {
362 retval = -EINVAL;
363 goto exit;
364 }
365 switch (dev->product_id) {
366 case USB_DEVICE_ID_CODEMERCS_IOW24:
367 case USB_DEVICE_ID_CODEMERCS_IOWPV1:
368 case USB_DEVICE_ID_CODEMERCS_IOWPV2:
369 case USB_DEVICE_ID_CODEMERCS_IOW40:
370 /* IOW24 and IOW40 use a synchronous call */
371 buf = kmalloc(count, GFP_KERNEL);
372 if (!buf) {
373 retval = -ENOMEM;
374 goto exit;
375 }
376 if (copy_from_user(buf, user_buffer, count)) {
377 retval = -EFAULT;
378 kfree(buf);
379 goto exit;
380 }
381 retval = usb_set_report(dev->interface, 2, 0, buf, count);
382 kfree(buf);
383 goto exit;
384 break;
385 case USB_DEVICE_ID_CODEMERCS_IOW56:
386 /* The IOW56 uses asynchronous IO and more urbs */
387 if (atomic_read(&dev->write_busy) == MAX_WRITES_IN_FLIGHT) {
388 /* Wait until we are below the limit for submitted urbs */
389 if (file->f_flags & O_NONBLOCK) {
390 retval = -EAGAIN;
391 goto exit;
392 } else {
393 retval = wait_event_interruptible(dev->write_wait,
394 (!dev->present || (atomic_read (&dev-> write_busy) < MAX_WRITES_IN_FLIGHT)));
395 if (retval) {
396 /* we were interrupted by a signal */
397 retval = -ERESTART;
398 goto exit;
399 }
400 if (!dev->present) {
401 /* The device was unplugged */
402 retval = -ENODEV;
403 goto exit;
404 }
405 if (!dev->opened) {
406 /* We were closed while waiting for an URB */
407 retval = -ENODEV;
408 goto exit;
409 }
410 }
411 }
412 atomic_inc(&dev->write_busy);
413 int_out_urb = usb_alloc_urb(0, GFP_KERNEL);
414 if (!int_out_urb) {
415 retval = -ENOMEM;
416 goto error_no_urb;
417 }
418 buf = usb_alloc_coherent(dev->udev, dev->report_size,
419 GFP_KERNEL, &int_out_urb->transfer_dma);
420 if (!buf) {
421 retval = -ENOMEM;
422 dev_dbg(&dev->interface->dev,
423 "Unable to allocate buffer\n");
424 goto error_no_buffer;
425 }
426 usb_fill_int_urb(int_out_urb, dev->udev,
427 usb_sndintpipe(dev->udev,
428 dev->int_out_endpoint->bEndpointAddress),
429 buf, dev->report_size,
430 iowarrior_write_callback, dev,
431 dev->int_out_endpoint->bInterval);
432 int_out_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
433 if (copy_from_user(buf, user_buffer, count)) {
434 retval = -EFAULT;
435 goto error;
436 }
437 retval = usb_submit_urb(int_out_urb, GFP_KERNEL);
438 if (retval) {
439 dev_dbg(&dev->interface->dev,
440 "submit error %d for urb nr.%d\n",
441 retval, atomic_read(&dev->write_busy));
442 goto error;
443 }
444 /* submit was ok */
445 retval = count;
446 usb_free_urb(int_out_urb);
447 goto exit;
448 break;
449 default:
450 /* what do we have here ? An unsupported Product-ID ? */
451 dev_err(&dev->interface->dev, "%s - not supported for product=0x%x\n",
452 __func__, dev->product_id);
453 retval = -EFAULT;
454 goto exit;
455 break;
456 }
457error:
458 usb_free_coherent(dev->udev, dev->report_size, buf,
459 int_out_urb->transfer_dma);
460error_no_buffer:
461 usb_free_urb(int_out_urb);
462error_no_urb:
463 atomic_dec(&dev->write_busy);
464 wake_up_interruptible(&dev->write_wait);
465exit:
466 mutex_unlock(&dev->mutex);
467 return retval;
468}
469
470/**
471 * iowarrior_ioctl
472 */
473static long iowarrior_ioctl(struct file *file, unsigned int cmd,
474 unsigned long arg)
475{
476 struct iowarrior *dev = NULL;
477 __u8 *buffer;
478 __u8 __user *user_buffer;
479 int retval;
480 int io_res; /* checks for bytes read/written and copy_to/from_user results */
481
482 dev = file->private_data;
483 if (!dev)
484 return -ENODEV;
485
486 buffer = kzalloc(dev->report_size, GFP_KERNEL);
487 if (!buffer)
488 return -ENOMEM;
489
490 /* lock this object */
491 mutex_lock(&iowarrior_mutex);
492 mutex_lock(&dev->mutex);
493
494 /* verify that the device wasn't unplugged */
495 if (!dev->present) {
496 retval = -ENODEV;
497 goto error_out;
498 }
499
500 dev_dbg(&dev->interface->dev, "minor %d, cmd 0x%.4x, arg %ld\n",
501 dev->minor, cmd, arg);
502
503 retval = 0;
504 io_res = 0;
505 switch (cmd) {
506 case IOW_WRITE:
507 if (dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW24 ||
508 dev->product_id == USB_DEVICE_ID_CODEMERCS_IOWPV1 ||
509 dev->product_id == USB_DEVICE_ID_CODEMERCS_IOWPV2 ||
510 dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW40) {
511 user_buffer = (__u8 __user *)arg;
512 io_res = copy_from_user(buffer, user_buffer,
513 dev->report_size);
514 if (io_res) {
515 retval = -EFAULT;
516 } else {
517 io_res = usb_set_report(dev->interface, 2, 0,
518 buffer,
519 dev->report_size);
520 if (io_res < 0)
521 retval = io_res;
522 }
523 } else {
524 retval = -EINVAL;
525 dev_err(&dev->interface->dev,
526 "ioctl 'IOW_WRITE' is not supported for product=0x%x.\n",
527 dev->product_id);
528 }
529 break;
530 case IOW_READ:
531 user_buffer = (__u8 __user *)arg;
532 io_res = usb_get_report(dev->udev,
533 dev->interface->cur_altsetting, 1, 0,
534 buffer, dev->report_size);
535 if (io_res < 0)
536 retval = io_res;
537 else {
538 io_res = copy_to_user(user_buffer, buffer, dev->report_size);
539 if (io_res)
540 retval = -EFAULT;
541 }
542 break;
543 case IOW_GETINFO:
544 {
545 /* Report available information for the device */
546 struct iowarrior_info info;
547 /* needed for power consumption */
548 struct usb_config_descriptor *cfg_descriptor = &dev->udev->actconfig->desc;
549
550 memset(&info, 0, sizeof(info));
551 /* directly from the descriptor */
552 info.vendor = le16_to_cpu(dev->udev->descriptor.idVendor);
553 info.product = dev->product_id;
554 info.revision = le16_to_cpu(dev->udev->descriptor.bcdDevice);
555
556 /* 0==UNKNOWN, 1==LOW(usb1.1) ,2=FULL(usb1.1), 3=HIGH(usb2.0) */
557 info.speed = le16_to_cpu(dev->udev->speed);
558 info.if_num = dev->interface->cur_altsetting->desc.bInterfaceNumber;
559 info.report_size = dev->report_size;
560
561 /* serial number string has been read earlier 8 chars or empty string */
562 memcpy(info.serial, dev->chip_serial,
563 sizeof(dev->chip_serial));
564 if (cfg_descriptor == NULL) {
565 info.power = -1; /* no information available */
566 } else {
567 /* the MaxPower is stored in units of 2mA to make it fit into a byte-value */
568 info.power = cfg_descriptor->bMaxPower * 2;
569 }
570 io_res = copy_to_user((struct iowarrior_info __user *)arg, &info,
571 sizeof(struct iowarrior_info));
572 if (io_res)
573 retval = -EFAULT;
574 break;
575 }
576 default:
577 /* return that we did not understand this ioctl call */
578 retval = -ENOTTY;
579 break;
580 }
581error_out:
582 /* unlock the device */
583 mutex_unlock(&dev->mutex);
584 mutex_unlock(&iowarrior_mutex);
585 kfree(buffer);
586 return retval;
587}
588
589/**
590 * iowarrior_open
591 */
592static int iowarrior_open(struct inode *inode, struct file *file)
593{
594 struct iowarrior *dev = NULL;
595 struct usb_interface *interface;
596 int subminor;
597 int retval = 0;
598
599 mutex_lock(&iowarrior_mutex);
600 subminor = iminor(inode);
601
602 interface = usb_find_interface(&iowarrior_driver, subminor);
603 if (!interface) {
604 mutex_unlock(&iowarrior_mutex);
605 printk(KERN_ERR "%s - error, can't find device for minor %d\n",
606 __func__, subminor);
607 return -ENODEV;
608 }
609
610 mutex_lock(&iowarrior_open_disc_lock);
611 dev = usb_get_intfdata(interface);
612 if (!dev) {
613 mutex_unlock(&iowarrior_open_disc_lock);
614 mutex_unlock(&iowarrior_mutex);
615 return -ENODEV;
616 }
617
618 mutex_lock(&dev->mutex);
619 mutex_unlock(&iowarrior_open_disc_lock);
620
621 /* Only one process can open each device, no sharing. */
622 if (dev->opened) {
623 retval = -EBUSY;
624 goto out;
625 }
626
627 /* setup interrupt handler for receiving values */
628 if ((retval = usb_submit_urb(dev->int_in_urb, GFP_KERNEL)) < 0) {
629 dev_err(&interface->dev, "Error %d while submitting URB\n", retval);
630 retval = -EFAULT;
631 goto out;
632 }
633 /* increment our usage count for the driver */
634 ++dev->opened;
635 /* save our object in the file's private structure */
636 file->private_data = dev;
637 retval = 0;
638
639out:
640 mutex_unlock(&dev->mutex);
641 mutex_unlock(&iowarrior_mutex);
642 return retval;
643}
644
645/**
646 * iowarrior_release
647 */
648static int iowarrior_release(struct inode *inode, struct file *file)
649{
650 struct iowarrior *dev;
651 int retval = 0;
652
653 dev = file->private_data;
654 if (!dev)
655 return -ENODEV;
656
657 dev_dbg(&dev->interface->dev, "minor %d\n", dev->minor);
658
659 /* lock our device */
660 mutex_lock(&dev->mutex);
661
662 if (dev->opened <= 0) {
663 retval = -ENODEV; /* close called more than once */
664 mutex_unlock(&dev->mutex);
665 } else {
666 dev->opened = 0; /* we're closing now */
667 retval = 0;
668 if (dev->present) {
669 /*
670 The device is still connected so we only shutdown
671 pending read-/write-ops.
672 */
673 usb_kill_urb(dev->int_in_urb);
674 wake_up_interruptible(&dev->read_wait);
675 wake_up_interruptible(&dev->write_wait);
676 mutex_unlock(&dev->mutex);
677 } else {
678 /* The device was unplugged, cleanup resources */
679 mutex_unlock(&dev->mutex);
680 iowarrior_delete(dev);
681 }
682 }
683 return retval;
684}
685
686static unsigned iowarrior_poll(struct file *file, poll_table * wait)
687{
688 struct iowarrior *dev = file->private_data;
689 unsigned int mask = 0;
690
691 if (!dev->present)
692 return POLLERR | POLLHUP;
693
694 poll_wait(file, &dev->read_wait, wait);
695 poll_wait(file, &dev->write_wait, wait);
696
697 if (!dev->present)
698 return POLLERR | POLLHUP;
699
700 if (read_index(dev) != -1)
701 mask |= POLLIN | POLLRDNORM;
702
703 if (atomic_read(&dev->write_busy) < MAX_WRITES_IN_FLIGHT)
704 mask |= POLLOUT | POLLWRNORM;
705 return mask;
706}
707
708/*
709 * File operations needed when we register this driver.
710 * This assumes that this driver NEEDS file operations,
711 * of course, which means that the driver is expected
712 * to have a node in the /dev directory. If the USB
713 * device were for a network interface then the driver
714 * would use "struct net_driver" instead, and a serial
715 * device would use "struct tty_driver".
716 */
717static const struct file_operations iowarrior_fops = {
718 .owner = THIS_MODULE,
719 .write = iowarrior_write,
720 .read = iowarrior_read,
721 .unlocked_ioctl = iowarrior_ioctl,
722 .open = iowarrior_open,
723 .release = iowarrior_release,
724 .poll = iowarrior_poll,
725 .llseek = noop_llseek,
726};
727
728static char *iowarrior_devnode(struct device *dev, umode_t *mode)
729{
730 return kasprintf(GFP_KERNEL, "usb/%s", dev_name(dev));
731}
732
733/*
734 * usb class driver info in order to get a minor number from the usb core,
735 * and to have the device registered with devfs and the driver core
736 */
737static struct usb_class_driver iowarrior_class = {
738 .name = "iowarrior%d",
739 .devnode = iowarrior_devnode,
740 .fops = &iowarrior_fops,
741 .minor_base = IOWARRIOR_MINOR_BASE,
742};
743
744/*---------------------------------*/
745/* probe and disconnect functions */
746/*---------------------------------*/
747/**
748 * iowarrior_probe
749 *
750 * Called by the usb core when a new device is connected that it thinks
751 * this driver might be interested in.
752 */
753static int iowarrior_probe(struct usb_interface *interface,
754 const struct usb_device_id *id)
755{
756 struct usb_device *udev = interface_to_usbdev(interface);
757 struct iowarrior *dev = NULL;
758 struct usb_host_interface *iface_desc;
759 struct usb_endpoint_descriptor *endpoint;
760 int i;
761 int retval = -ENOMEM;
762
763 /* allocate memory for our device state and initialize it */
764 dev = kzalloc(sizeof(struct iowarrior), GFP_KERNEL);
765 if (!dev)
766 return retval;
767
768 mutex_init(&dev->mutex);
769
770 atomic_set(&dev->intr_idx, 0);
771 atomic_set(&dev->read_idx, 0);
772 spin_lock_init(&dev->intr_idx_lock);
773 atomic_set(&dev->overflow_flag, 0);
774 init_waitqueue_head(&dev->read_wait);
775 atomic_set(&dev->write_busy, 0);
776 init_waitqueue_head(&dev->write_wait);
777
778 dev->udev = udev;
779 dev->interface = interface;
780
781 iface_desc = interface->cur_altsetting;
782 dev->product_id = le16_to_cpu(udev->descriptor.idProduct);
783
784 /* set up the endpoint information */
785 for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
786 endpoint = &iface_desc->endpoint[i].desc;
787
788 if (usb_endpoint_is_int_in(endpoint))
789 dev->int_in_endpoint = endpoint;
790 if (usb_endpoint_is_int_out(endpoint))
791 /* this one will match for the IOWarrior56 only */
792 dev->int_out_endpoint = endpoint;
793 }
794
795 if (!dev->int_in_endpoint) {
796 dev_err(&interface->dev, "no interrupt-in endpoint found\n");
797 retval = -ENODEV;
798 goto error;
799 }
800
801 if (dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW56) {
802 if (!dev->int_out_endpoint) {
803 dev_err(&interface->dev, "no interrupt-out endpoint found\n");
804 retval = -ENODEV;
805 goto error;
806 }
807 }
808
809 /* we have to check the report_size often, so remember it in the endianness suitable for our machine */
810 dev->report_size = usb_endpoint_maxp(dev->int_in_endpoint);
811 if ((dev->interface->cur_altsetting->desc.bInterfaceNumber == 0) &&
812 (dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW56))
813 /* IOWarrior56 has wMaxPacketSize different from report size */
814 dev->report_size = 7;
815
816 /* create the urb and buffer for reading */
817 dev->int_in_urb = usb_alloc_urb(0, GFP_KERNEL);
818 if (!dev->int_in_urb)
819 goto error;
820 dev->int_in_buffer = kmalloc(dev->report_size, GFP_KERNEL);
821 if (!dev->int_in_buffer)
822 goto error;
823 usb_fill_int_urb(dev->int_in_urb, dev->udev,
824 usb_rcvintpipe(dev->udev,
825 dev->int_in_endpoint->bEndpointAddress),
826 dev->int_in_buffer, dev->report_size,
827 iowarrior_callback, dev,
828 dev->int_in_endpoint->bInterval);
829 /* create an internal buffer for interrupt data from the device */
830 dev->read_queue =
831 kmalloc(((dev->report_size + 1) * MAX_INTERRUPT_BUFFER),
832 GFP_KERNEL);
833 if (!dev->read_queue)
834 goto error;
835 /* Get the serial-number of the chip */
836 memset(dev->chip_serial, 0x00, sizeof(dev->chip_serial));
837 usb_string(udev, udev->descriptor.iSerialNumber, dev->chip_serial,
838 sizeof(dev->chip_serial));
839 if (strlen(dev->chip_serial) != 8)
840 memset(dev->chip_serial, 0x00, sizeof(dev->chip_serial));
841
842 /* Set the idle timeout to 0, if this is interface 0 */
843 if (dev->interface->cur_altsetting->desc.bInterfaceNumber == 0) {
844 usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
845 0x0A,
846 USB_TYPE_CLASS | USB_RECIP_INTERFACE, 0,
847 0, NULL, 0, USB_CTRL_SET_TIMEOUT);
848 }
849 /* allow device read and ioctl */
850 dev->present = 1;
851
852 /* we can register the device now, as it is ready */
853 usb_set_intfdata(interface, dev);
854
855 retval = usb_register_dev(interface, &iowarrior_class);
856 if (retval) {
857 /* something prevented us from registering this driver */
858 dev_err(&interface->dev, "Not able to get a minor for this device.\n");
859 usb_set_intfdata(interface, NULL);
860 goto error;
861 }
862
863 dev->minor = interface->minor;
864
865 /* let the user know what node this device is now attached to */
866 dev_info(&interface->dev, "IOWarrior product=0x%x, serial=%s interface=%d "
867 "now attached to iowarrior%d\n", dev->product_id, dev->chip_serial,
868 iface_desc->desc.bInterfaceNumber, dev->minor - IOWARRIOR_MINOR_BASE);
869 return retval;
870
871error:
872 iowarrior_delete(dev);
873 return retval;
874}
875
876/**
877 * iowarrior_disconnect
878 *
879 * Called by the usb core when the device is removed from the system.
880 */
881static void iowarrior_disconnect(struct usb_interface *interface)
882{
883 struct iowarrior *dev;
884 int minor;
885
886 dev = usb_get_intfdata(interface);
887 mutex_lock(&iowarrior_open_disc_lock);
888 usb_set_intfdata(interface, NULL);
889
890 minor = dev->minor;
891
892 /* give back our minor */
893 usb_deregister_dev(interface, &iowarrior_class);
894
895 mutex_lock(&dev->mutex);
896
897 /* prevent device read, write and ioctl */
898 dev->present = 0;
899
900 mutex_unlock(&dev->mutex);
901 mutex_unlock(&iowarrior_open_disc_lock);
902
903 if (dev->opened) {
904 /* There is a process that holds a filedescriptor to the device ,
905 so we only shutdown read-/write-ops going on.
906 Deleting the device is postponed until close() was called.
907 */
908 usb_kill_urb(dev->int_in_urb);
909 wake_up_interruptible(&dev->read_wait);
910 wake_up_interruptible(&dev->write_wait);
911 } else {
912 /* no process is using the device, cleanup now */
913 iowarrior_delete(dev);
914 }
915
916 dev_info(&interface->dev, "I/O-Warror #%d now disconnected\n",
917 minor - IOWARRIOR_MINOR_BASE);
918}
919
920/* usb specific object needed to register this driver with the usb subsystem */
921static struct usb_driver iowarrior_driver = {
922 .name = "iowarrior",
923 .probe = iowarrior_probe,
924 .disconnect = iowarrior_disconnect,
925 .id_table = iowarrior_ids,
926};
927
928module_usb_driver(iowarrior_driver);