Loading...
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * twl4030-irq.c - TWL4030/TPS659x0 irq support
4 *
5 * Copyright (C) 2005-2006 Texas Instruments, Inc.
6 *
7 * Modifications to defer interrupt handling to a kernel thread:
8 * Copyright (C) 2006 MontaVista Software, Inc.
9 *
10 * Based on tlv320aic23.c:
11 * Copyright (c) by Kai Svahn <kai.svahn@nokia.com>
12 *
13 * Code cleanup and modifications to IRQ handler.
14 * by syed khasim <x0khasim@ti.com>
15 */
16
17#include <linux/device.h>
18#include <linux/export.h>
19#include <linux/interrupt.h>
20#include <linux/irq.h>
21#include <linux/slab.h>
22#include <linux/of.h>
23#include <linux/irqdomain.h>
24#include <linux/mfd/twl.h>
25
26#include "twl-core.h"
27
28/*
29 * TWL4030 IRQ handling has two stages in hardware, and thus in software.
30 * The Primary Interrupt Handler (PIH) stage exposes status bits saying
31 * which Secondary Interrupt Handler (SIH) stage is raising an interrupt.
32 * SIH modules are more traditional IRQ components, which support per-IRQ
33 * enable/disable and trigger controls; they do most of the work.
34 *
35 * These chips are designed to support IRQ handling from two different
36 * I2C masters. Each has a dedicated IRQ line, and dedicated IRQ status
37 * and mask registers in the PIH and SIH modules.
38 *
39 * We set up IRQs starting at a platform-specified base, always starting
40 * with PIH and the SIH for PWR_INT and then usually adding GPIO:
41 * base + 0 .. base + 7 PIH
42 * base + 8 .. base + 15 SIH for PWR_INT
43 * base + 16 .. base + 33 SIH for GPIO
44 */
45#define TWL4030_CORE_NR_IRQS 8
46#define TWL4030_PWR_NR_IRQS 8
47
48/* PIH register offsets */
49#define REG_PIH_ISR_P1 0x01
50#define REG_PIH_ISR_P2 0x02
51#define REG_PIH_SIR 0x03 /* for testing */
52
53/* Linux could (eventually) use either IRQ line */
54static int irq_line;
55
56struct sih {
57 char name[8];
58 u8 module; /* module id */
59 u8 control_offset; /* for SIH_CTRL */
60 bool set_cor;
61
62 u8 bits; /* valid in isr/imr */
63 u8 bytes_ixr; /* bytelen of ISR/IMR/SIR */
64
65 u8 edr_offset;
66 u8 bytes_edr; /* bytelen of EDR */
67
68 u8 irq_lines; /* number of supported irq lines */
69
70 /* SIR ignored -- set interrupt, for testing only */
71 struct sih_irq_data {
72 u8 isr_offset;
73 u8 imr_offset;
74 } mask[2];
75 /* + 2 bytes padding */
76};
77
78static const struct sih *sih_modules;
79static int nr_sih_modules;
80
81#define SIH_INITIALIZER(modname, nbits) \
82 .module = TWL4030_MODULE_ ## modname, \
83 .control_offset = TWL4030_ ## modname ## _SIH_CTRL, \
84 .bits = nbits, \
85 .bytes_ixr = DIV_ROUND_UP(nbits, 8), \
86 .edr_offset = TWL4030_ ## modname ## _EDR, \
87 .bytes_edr = DIV_ROUND_UP((2*(nbits)), 8), \
88 .irq_lines = 2, \
89 .mask = { { \
90 .isr_offset = TWL4030_ ## modname ## _ISR1, \
91 .imr_offset = TWL4030_ ## modname ## _IMR1, \
92 }, \
93 { \
94 .isr_offset = TWL4030_ ## modname ## _ISR2, \
95 .imr_offset = TWL4030_ ## modname ## _IMR2, \
96 }, },
97
98/* register naming policies are inconsistent ... */
99#define TWL4030_INT_PWR_EDR TWL4030_INT_PWR_EDR1
100#define TWL4030_MODULE_KEYPAD_KEYP TWL4030_MODULE_KEYPAD
101#define TWL4030_MODULE_INT_PWR TWL4030_MODULE_INT
102
103
104/*
105 * Order in this table matches order in PIH_ISR. That is,
106 * BIT(n) in PIH_ISR is sih_modules[n].
107 */
108/* sih_modules_twl4030 is used both in twl4030 and twl5030 */
109static const struct sih sih_modules_twl4030[6] = {
110 [0] = {
111 .name = "gpio",
112 .module = TWL4030_MODULE_GPIO,
113 .control_offset = REG_GPIO_SIH_CTRL,
114 .set_cor = true,
115 .bits = TWL4030_GPIO_MAX,
116 .bytes_ixr = 3,
117 /* Note: *all* of these IRQs default to no-trigger */
118 .edr_offset = REG_GPIO_EDR1,
119 .bytes_edr = 5,
120 .irq_lines = 2,
121 .mask = { {
122 .isr_offset = REG_GPIO_ISR1A,
123 .imr_offset = REG_GPIO_IMR1A,
124 }, {
125 .isr_offset = REG_GPIO_ISR1B,
126 .imr_offset = REG_GPIO_IMR1B,
127 }, },
128 },
129 [1] = {
130 .name = "keypad",
131 .set_cor = true,
132 SIH_INITIALIZER(KEYPAD_KEYP, 4)
133 },
134 [2] = {
135 .name = "bci",
136 .module = TWL4030_MODULE_INTERRUPTS,
137 .control_offset = TWL4030_INTERRUPTS_BCISIHCTRL,
138 .set_cor = true,
139 .bits = 12,
140 .bytes_ixr = 2,
141 .edr_offset = TWL4030_INTERRUPTS_BCIEDR1,
142 /* Note: most of these IRQs default to no-trigger */
143 .bytes_edr = 3,
144 .irq_lines = 2,
145 .mask = { {
146 .isr_offset = TWL4030_INTERRUPTS_BCIISR1A,
147 .imr_offset = TWL4030_INTERRUPTS_BCIIMR1A,
148 }, {
149 .isr_offset = TWL4030_INTERRUPTS_BCIISR1B,
150 .imr_offset = TWL4030_INTERRUPTS_BCIIMR1B,
151 }, },
152 },
153 [3] = {
154 .name = "madc",
155 SIH_INITIALIZER(MADC, 4)
156 },
157 [4] = {
158 /* USB doesn't use the same SIH organization */
159 .name = "usb",
160 },
161 [5] = {
162 .name = "power",
163 .set_cor = true,
164 SIH_INITIALIZER(INT_PWR, 8)
165 },
166 /* there are no SIH modules #6 or #7 ... */
167};
168
169static const struct sih sih_modules_twl5031[8] = {
170 [0] = {
171 .name = "gpio",
172 .module = TWL4030_MODULE_GPIO,
173 .control_offset = REG_GPIO_SIH_CTRL,
174 .set_cor = true,
175 .bits = TWL4030_GPIO_MAX,
176 .bytes_ixr = 3,
177 /* Note: *all* of these IRQs default to no-trigger */
178 .edr_offset = REG_GPIO_EDR1,
179 .bytes_edr = 5,
180 .irq_lines = 2,
181 .mask = { {
182 .isr_offset = REG_GPIO_ISR1A,
183 .imr_offset = REG_GPIO_IMR1A,
184 }, {
185 .isr_offset = REG_GPIO_ISR1B,
186 .imr_offset = REG_GPIO_IMR1B,
187 }, },
188 },
189 [1] = {
190 .name = "keypad",
191 .set_cor = true,
192 SIH_INITIALIZER(KEYPAD_KEYP, 4)
193 },
194 [2] = {
195 .name = "bci",
196 .module = TWL5031_MODULE_INTERRUPTS,
197 .control_offset = TWL5031_INTERRUPTS_BCISIHCTRL,
198 .bits = 7,
199 .bytes_ixr = 1,
200 .edr_offset = TWL5031_INTERRUPTS_BCIEDR1,
201 /* Note: most of these IRQs default to no-trigger */
202 .bytes_edr = 2,
203 .irq_lines = 2,
204 .mask = { {
205 .isr_offset = TWL5031_INTERRUPTS_BCIISR1,
206 .imr_offset = TWL5031_INTERRUPTS_BCIIMR1,
207 }, {
208 .isr_offset = TWL5031_INTERRUPTS_BCIISR2,
209 .imr_offset = TWL5031_INTERRUPTS_BCIIMR2,
210 }, },
211 },
212 [3] = {
213 .name = "madc",
214 SIH_INITIALIZER(MADC, 4)
215 },
216 [4] = {
217 /* USB doesn't use the same SIH organization */
218 .name = "usb",
219 },
220 [5] = {
221 .name = "power",
222 .set_cor = true,
223 SIH_INITIALIZER(INT_PWR, 8)
224 },
225 [6] = {
226 /*
227 * ECI/DBI doesn't use the same SIH organization.
228 * For example, it supports only one interrupt output line.
229 * That is, the interrupts are seen on both INT1 and INT2 lines.
230 */
231 .name = "eci_dbi",
232 .module = TWL5031_MODULE_ACCESSORY,
233 .bits = 9,
234 .bytes_ixr = 2,
235 .irq_lines = 1,
236 .mask = { {
237 .isr_offset = TWL5031_ACIIDR_LSB,
238 .imr_offset = TWL5031_ACIIMR_LSB,
239 }, },
240
241 },
242 [7] = {
243 /* Audio accessory */
244 .name = "audio",
245 .module = TWL5031_MODULE_ACCESSORY,
246 .control_offset = TWL5031_ACCSIHCTRL,
247 .bits = 2,
248 .bytes_ixr = 1,
249 .edr_offset = TWL5031_ACCEDR1,
250 /* Note: most of these IRQs default to no-trigger */
251 .bytes_edr = 1,
252 .irq_lines = 2,
253 .mask = { {
254 .isr_offset = TWL5031_ACCISR1,
255 .imr_offset = TWL5031_ACCIMR1,
256 }, {
257 .isr_offset = TWL5031_ACCISR2,
258 .imr_offset = TWL5031_ACCIMR2,
259 }, },
260 },
261};
262
263#undef TWL4030_MODULE_KEYPAD_KEYP
264#undef TWL4030_MODULE_INT_PWR
265#undef TWL4030_INT_PWR_EDR
266
267/*----------------------------------------------------------------------*/
268
269static unsigned twl4030_irq_base;
270
271/*
272 * handle_twl4030_pih() is the desc->handle method for the twl4030 interrupt.
273 * This is a chained interrupt, so there is no desc->action method for it.
274 * Now we need to query the interrupt controller in the twl4030 to determine
275 * which module is generating the interrupt request. However, we can't do i2c
276 * transactions in interrupt context, so we must defer that work to a kernel
277 * thread. All we do here is acknowledge and mask the interrupt and wakeup
278 * the kernel thread.
279 */
280static irqreturn_t handle_twl4030_pih(int irq, void *devid)
281{
282 irqreturn_t ret;
283 u8 pih_isr;
284
285 ret = twl_i2c_read_u8(TWL_MODULE_PIH, &pih_isr,
286 REG_PIH_ISR_P1);
287 if (ret) {
288 pr_warn("twl4030: I2C error %d reading PIH ISR\n", ret);
289 return IRQ_NONE;
290 }
291
292 while (pih_isr) {
293 unsigned long pending = __ffs(pih_isr);
294 unsigned int irq;
295
296 pih_isr &= ~BIT(pending);
297 irq = pending + twl4030_irq_base;
298 handle_nested_irq(irq);
299 }
300
301 return IRQ_HANDLED;
302}
303
304/*----------------------------------------------------------------------*/
305
306/*
307 * twl4030_init_sih_modules() ... start from a known state where no
308 * IRQs will be coming in, and where we can quickly enable them then
309 * handle them as they arrive. Mask all IRQs: maybe init SIH_CTRL.
310 *
311 * NOTE: we don't touch EDR registers here; they stay with hardware
312 * defaults or whatever the last value was. Note that when both EDR
313 * bits for an IRQ are clear, that's as if its IMR bit is set...
314 */
315static int twl4030_init_sih_modules(unsigned line)
316{
317 const struct sih *sih;
318 u8 buf[4];
319 int i;
320 int status;
321
322 /* line 0 == int1_n signal; line 1 == int2_n signal */
323 if (line > 1)
324 return -EINVAL;
325
326 irq_line = line;
327
328 /* disable all interrupts on our line */
329 memset(buf, 0xff, sizeof(buf));
330 sih = sih_modules;
331 for (i = 0; i < nr_sih_modules; i++, sih++) {
332 /* skip USB -- it's funky */
333 if (!sih->bytes_ixr)
334 continue;
335
336 /* Not all the SIH modules support multiple interrupt lines */
337 if (sih->irq_lines <= line)
338 continue;
339
340 status = twl_i2c_write(sih->module, buf,
341 sih->mask[line].imr_offset, sih->bytes_ixr);
342 if (status < 0)
343 pr_err("twl4030: err %d initializing %s %s\n",
344 status, sih->name, "IMR");
345
346 /*
347 * Maybe disable "exclusive" mode; buffer second pending irq;
348 * set Clear-On-Read (COR) bit.
349 *
350 * NOTE that sometimes COR polarity is documented as being
351 * inverted: for MADC, COR=1 means "clear on write".
352 * And for PWR_INT it's not documented...
353 */
354 if (sih->set_cor) {
355 status = twl_i2c_write_u8(sih->module,
356 TWL4030_SIH_CTRL_COR_MASK,
357 sih->control_offset);
358 if (status < 0)
359 pr_err("twl4030: err %d initializing %s %s\n",
360 status, sih->name, "SIH_CTRL");
361 }
362 }
363
364 sih = sih_modules;
365 for (i = 0; i < nr_sih_modules; i++, sih++) {
366 u8 rxbuf[4];
367 int j;
368
369 /* skip USB */
370 if (!sih->bytes_ixr)
371 continue;
372
373 /* Not all the SIH modules support multiple interrupt lines */
374 if (sih->irq_lines <= line)
375 continue;
376
377 /*
378 * Clear pending interrupt status. Either the read was
379 * enough, or we need to write those bits. Repeat, in
380 * case an IRQ is pending (PENDDIS=0) ... that's not
381 * uncommon with PWR_INT.PWRON.
382 */
383 for (j = 0; j < 2; j++) {
384 status = twl_i2c_read(sih->module, rxbuf,
385 sih->mask[line].isr_offset, sih->bytes_ixr);
386 if (status < 0)
387 pr_warn("twl4030: err %d initializing %s %s\n",
388 status, sih->name, "ISR");
389
390 if (!sih->set_cor) {
391 status = twl_i2c_write(sih->module, buf,
392 sih->mask[line].isr_offset,
393 sih->bytes_ixr);
394 if (status < 0)
395 pr_warn("twl4030: write failed: %d\n",
396 status);
397 }
398 /*
399 * else COR=1 means read sufficed.
400 * (for most SIH modules...)
401 */
402 }
403 }
404
405 return 0;
406}
407
408static inline void activate_irq(int irq)
409{
410 irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE);
411}
412
413/*----------------------------------------------------------------------*/
414
415struct sih_agent {
416 int irq_base;
417 const struct sih *sih;
418
419 u32 imr;
420 bool imr_change_pending;
421
422 u32 edge_change;
423
424 struct mutex irq_lock;
425 char *irq_name;
426};
427
428/*----------------------------------------------------------------------*/
429
430/*
431 * All irq_chip methods get issued from code holding irq_desc[irq].lock,
432 * which can't perform the underlying I2C operations (because they sleep).
433 * So we must hand them off to a thread (workqueue) and cope with asynch
434 * completion, potentially including some re-ordering, of these requests.
435 */
436
437static void twl4030_sih_mask(struct irq_data *data)
438{
439 struct sih_agent *agent = irq_data_get_irq_chip_data(data);
440
441 agent->imr |= BIT(data->irq - agent->irq_base);
442 agent->imr_change_pending = true;
443}
444
445static void twl4030_sih_unmask(struct irq_data *data)
446{
447 struct sih_agent *agent = irq_data_get_irq_chip_data(data);
448
449 agent->imr &= ~BIT(data->irq - agent->irq_base);
450 agent->imr_change_pending = true;
451}
452
453static int twl4030_sih_set_type(struct irq_data *data, unsigned trigger)
454{
455 struct sih_agent *agent = irq_data_get_irq_chip_data(data);
456
457 if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
458 return -EINVAL;
459
460 if (irqd_get_trigger_type(data) != trigger)
461 agent->edge_change |= BIT(data->irq - agent->irq_base);
462
463 return 0;
464}
465
466static void twl4030_sih_bus_lock(struct irq_data *data)
467{
468 struct sih_agent *agent = irq_data_get_irq_chip_data(data);
469
470 mutex_lock(&agent->irq_lock);
471}
472
473static void twl4030_sih_bus_sync_unlock(struct irq_data *data)
474{
475 struct sih_agent *agent = irq_data_get_irq_chip_data(data);
476 const struct sih *sih = agent->sih;
477 int status;
478
479 if (agent->imr_change_pending) {
480 union {
481 __le32 word;
482 u8 bytes[4];
483 } imr;
484
485 /* byte[0] gets overwritten as we write ... */
486 imr.word = cpu_to_le32(agent->imr);
487 agent->imr_change_pending = false;
488
489 /* write the whole mask ... simpler than subsetting it */
490 status = twl_i2c_write(sih->module, imr.bytes,
491 sih->mask[irq_line].imr_offset,
492 sih->bytes_ixr);
493 if (status)
494 pr_err("twl4030: %s, %s --> %d\n", __func__,
495 "write", status);
496 }
497
498 if (agent->edge_change) {
499 u32 edge_change;
500 u8 bytes[6];
501
502 edge_change = agent->edge_change;
503 agent->edge_change = 0;
504
505 /*
506 * Read, reserving first byte for write scratch. Yes, this
507 * could be cached for some speedup ... but be careful about
508 * any processor on the other IRQ line, EDR registers are
509 * shared.
510 */
511 status = twl_i2c_read(sih->module, bytes,
512 sih->edr_offset, sih->bytes_edr);
513 if (status) {
514 pr_err("twl4030: %s, %s --> %d\n", __func__,
515 "read", status);
516 return;
517 }
518
519 /* Modify only the bits we know must change */
520 while (edge_change) {
521 int i = fls(edge_change) - 1;
522 int byte = i >> 2;
523 int off = (i & 0x3) * 2;
524 unsigned int type;
525
526 bytes[byte] &= ~(0x03 << off);
527
528 type = irq_get_trigger_type(i + agent->irq_base);
529 if (type & IRQ_TYPE_EDGE_RISING)
530 bytes[byte] |= BIT(off + 1);
531 if (type & IRQ_TYPE_EDGE_FALLING)
532 bytes[byte] |= BIT(off + 0);
533
534 edge_change &= ~BIT(i);
535 }
536
537 /* Write */
538 status = twl_i2c_write(sih->module, bytes,
539 sih->edr_offset, sih->bytes_edr);
540 if (status)
541 pr_err("twl4030: %s, %s --> %d\n", __func__,
542 "write", status);
543 }
544
545 mutex_unlock(&agent->irq_lock);
546}
547
548static struct irq_chip twl4030_sih_irq_chip = {
549 .name = "twl4030",
550 .irq_mask = twl4030_sih_mask,
551 .irq_unmask = twl4030_sih_unmask,
552 .irq_set_type = twl4030_sih_set_type,
553 .irq_bus_lock = twl4030_sih_bus_lock,
554 .irq_bus_sync_unlock = twl4030_sih_bus_sync_unlock,
555 .flags = IRQCHIP_SKIP_SET_WAKE,
556};
557
558/*----------------------------------------------------------------------*/
559
560static inline int sih_read_isr(const struct sih *sih)
561{
562 int status;
563 union {
564 u8 bytes[4];
565 __le32 word;
566 } isr;
567
568 /* FIXME need retry-on-error ... */
569
570 isr.word = 0;
571 status = twl_i2c_read(sih->module, isr.bytes,
572 sih->mask[irq_line].isr_offset, sih->bytes_ixr);
573
574 return (status < 0) ? status : le32_to_cpu(isr.word);
575}
576
577/*
578 * Generic handler for SIH interrupts ... we "know" this is called
579 * in task context, with IRQs enabled.
580 */
581static irqreturn_t handle_twl4030_sih(int irq, void *data)
582{
583 struct sih_agent *agent = irq_get_handler_data(irq);
584 const struct sih *sih = agent->sih;
585 int isr;
586
587 /* reading ISR acks the IRQs, using clear-on-read mode */
588 isr = sih_read_isr(sih);
589
590 if (isr < 0) {
591 pr_err("twl4030: %s SIH, read ISR error %d\n",
592 sih->name, isr);
593 /* REVISIT: recover; eventually mask it all, etc */
594 return IRQ_HANDLED;
595 }
596
597 while (isr) {
598 irq = fls(isr);
599 irq--;
600 isr &= ~BIT(irq);
601
602 if (irq < sih->bits)
603 handle_nested_irq(agent->irq_base + irq);
604 else
605 pr_err("twl4030: %s SIH, invalid ISR bit %d\n",
606 sih->name, irq);
607 }
608 return IRQ_HANDLED;
609}
610
611/* returns the first IRQ used by this SIH bank, or negative errno */
612int twl4030_sih_setup(struct device *dev, int module, int irq_base)
613{
614 int sih_mod;
615 const struct sih *sih = NULL;
616 struct sih_agent *agent;
617 int i, irq;
618 int status = -EINVAL;
619
620 /* only support modules with standard clear-on-read for now */
621 for (sih_mod = 0, sih = sih_modules; sih_mod < nr_sih_modules;
622 sih_mod++, sih++) {
623 if (sih->module == module && sih->set_cor) {
624 status = 0;
625 break;
626 }
627 }
628
629 if (status < 0) {
630 dev_err(dev, "module to setup SIH for not found\n");
631 return status;
632 }
633
634 agent = kzalloc(sizeof(*agent), GFP_KERNEL);
635 if (!agent)
636 return -ENOMEM;
637
638 agent->irq_base = irq_base;
639 agent->sih = sih;
640 agent->imr = ~0;
641 mutex_init(&agent->irq_lock);
642
643 for (i = 0; i < sih->bits; i++) {
644 irq = irq_base + i;
645
646 irq_set_chip_data(irq, agent);
647 irq_set_chip_and_handler(irq, &twl4030_sih_irq_chip,
648 handle_edge_irq);
649 irq_set_nested_thread(irq, 1);
650 activate_irq(irq);
651 }
652
653 /* replace generic PIH handler (handle_simple_irq) */
654 irq = sih_mod + twl4030_irq_base;
655 irq_set_handler_data(irq, agent);
656 agent->irq_name = kasprintf(GFP_KERNEL, "twl4030_%s", sih->name);
657 status = request_threaded_irq(irq, NULL, handle_twl4030_sih,
658 IRQF_EARLY_RESUME | IRQF_ONESHOT,
659 agent->irq_name ?: sih->name, NULL);
660
661 dev_info(dev, "%s (irq %d) chaining IRQs %d..%d\n", sih->name,
662 irq, irq_base, irq_base + i - 1);
663
664 return status < 0 ? status : irq_base;
665}
666
667/* FIXME need a call to reverse twl4030_sih_setup() ... */
668
669/*----------------------------------------------------------------------*/
670
671/* FIXME pass in which interrupt line we'll use ... */
672#define twl_irq_line 0
673
674int twl4030_init_irq(struct device *dev, int irq_num)
675{
676 static struct irq_chip twl4030_irq_chip;
677 int status, i;
678 int irq_base, irq_end, nr_irqs;
679 struct device_node *node = dev->of_node;
680
681 /*
682 * TWL core and pwr interrupts must be contiguous because
683 * the hwirqs numbers are defined contiguously from 1 to 15.
684 * Create only one domain for both.
685 */
686 nr_irqs = TWL4030_PWR_NR_IRQS + TWL4030_CORE_NR_IRQS;
687
688 irq_base = irq_alloc_descs(-1, 0, nr_irqs, 0);
689 if (irq_base < 0) {
690 dev_err(dev, "Fail to allocate IRQ descs\n");
691 return irq_base;
692 }
693
694 irq_domain_add_legacy(node, nr_irqs, irq_base, 0,
695 &irq_domain_simple_ops, NULL);
696
697 irq_end = irq_base + TWL4030_CORE_NR_IRQS;
698
699 /*
700 * Mask and clear all TWL4030 interrupts since initially we do
701 * not have any TWL4030 module interrupt handlers present
702 */
703 status = twl4030_init_sih_modules(twl_irq_line);
704 if (status < 0)
705 return status;
706
707 twl4030_irq_base = irq_base;
708
709 /*
710 * Install an irq handler for each of the SIH modules;
711 * clone dummy irq_chip since PIH can't *do* anything
712 */
713 twl4030_irq_chip = dummy_irq_chip;
714 twl4030_irq_chip.name = "twl4030";
715
716 twl4030_sih_irq_chip.irq_ack = dummy_irq_chip.irq_ack;
717
718 for (i = irq_base; i < irq_end; i++) {
719 irq_set_chip_and_handler(i, &twl4030_irq_chip,
720 handle_simple_irq);
721 irq_set_nested_thread(i, 1);
722 activate_irq(i);
723 }
724
725 dev_info(dev, "%s (irq %d) chaining IRQs %d..%d\n", "PIH",
726 irq_num, irq_base, irq_end);
727
728 /* ... and the PWR_INT module ... */
729 status = twl4030_sih_setup(dev, TWL4030_MODULE_INT, irq_end);
730 if (status < 0) {
731 dev_err(dev, "sih_setup PWR INT --> %d\n", status);
732 goto fail;
733 }
734
735 /* install an irq handler to demultiplex the TWL4030 interrupt */
736 status = request_threaded_irq(irq_num, NULL, handle_twl4030_pih,
737 IRQF_ONESHOT,
738 "TWL4030-PIH", NULL);
739 if (status < 0) {
740 dev_err(dev, "could not claim irq%d: %d\n", irq_num, status);
741 goto fail_rqirq;
742 }
743 enable_irq_wake(irq_num);
744
745 return irq_base;
746fail_rqirq:
747 /* clean up twl4030_sih_setup */
748fail:
749 for (i = irq_base; i < irq_end; i++) {
750 irq_set_nested_thread(i, 0);
751 irq_set_chip_and_handler(i, NULL, NULL);
752 }
753
754 return status;
755}
756
757void twl4030_exit_irq(void)
758{
759 /* FIXME undo twl_init_irq() */
760 if (twl4030_irq_base)
761 pr_err("twl4030: can't yet clean up IRQs?\n");
762}
763
764int twl4030_init_chip_irq(const char *chip)
765{
766 if (!strcmp(chip, "twl5031")) {
767 sih_modules = sih_modules_twl5031;
768 nr_sih_modules = ARRAY_SIZE(sih_modules_twl5031);
769 } else {
770 sih_modules = sih_modules_twl4030;
771 nr_sih_modules = ARRAY_SIZE(sih_modules_twl4030);
772 }
773
774 return 0;
775}
1/*
2 * twl4030-irq.c - TWL4030/TPS659x0 irq support
3 *
4 * Copyright (C) 2005-2006 Texas Instruments, Inc.
5 *
6 * Modifications to defer interrupt handling to a kernel thread:
7 * Copyright (C) 2006 MontaVista Software, Inc.
8 *
9 * Based on tlv320aic23.c:
10 * Copyright (c) by Kai Svahn <kai.svahn@nokia.com>
11 *
12 * Code cleanup and modifications to IRQ handler.
13 * by syed khasim <x0khasim@ti.com>
14 *
15 * This program is free software; you can redistribute it and/or modify
16 * it under the terms of the GNU General Public License as published by
17 * the Free Software Foundation; either version 2 of the License, or
18 * (at your option) any later version.
19 *
20 * This program is distributed in the hope that it will be useful,
21 * but WITHOUT ANY WARRANTY; without even the implied warranty of
22 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
23 * GNU General Public License for more details.
24 *
25 * You should have received a copy of the GNU General Public License
26 * along with this program; if not, write to the Free Software
27 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
28 */
29
30#include <linux/export.h>
31#include <linux/interrupt.h>
32#include <linux/irq.h>
33#include <linux/slab.h>
34#include <linux/of.h>
35#include <linux/irqdomain.h>
36#include <linux/i2c/twl.h>
37
38#include "twl-core.h"
39
40/*
41 * TWL4030 IRQ handling has two stages in hardware, and thus in software.
42 * The Primary Interrupt Handler (PIH) stage exposes status bits saying
43 * which Secondary Interrupt Handler (SIH) stage is raising an interrupt.
44 * SIH modules are more traditional IRQ components, which support per-IRQ
45 * enable/disable and trigger controls; they do most of the work.
46 *
47 * These chips are designed to support IRQ handling from two different
48 * I2C masters. Each has a dedicated IRQ line, and dedicated IRQ status
49 * and mask registers in the PIH and SIH modules.
50 *
51 * We set up IRQs starting at a platform-specified base, always starting
52 * with PIH and the SIH for PWR_INT and then usually adding GPIO:
53 * base + 0 .. base + 7 PIH
54 * base + 8 .. base + 15 SIH for PWR_INT
55 * base + 16 .. base + 33 SIH for GPIO
56 */
57#define TWL4030_CORE_NR_IRQS 8
58#define TWL4030_PWR_NR_IRQS 8
59
60/* PIH register offsets */
61#define REG_PIH_ISR_P1 0x01
62#define REG_PIH_ISR_P2 0x02
63#define REG_PIH_SIR 0x03 /* for testing */
64
65/* Linux could (eventually) use either IRQ line */
66static int irq_line;
67
68struct sih {
69 char name[8];
70 u8 module; /* module id */
71 u8 control_offset; /* for SIH_CTRL */
72 bool set_cor;
73
74 u8 bits; /* valid in isr/imr */
75 u8 bytes_ixr; /* bytelen of ISR/IMR/SIR */
76
77 u8 edr_offset;
78 u8 bytes_edr; /* bytelen of EDR */
79
80 u8 irq_lines; /* number of supported irq lines */
81
82 /* SIR ignored -- set interrupt, for testing only */
83 struct sih_irq_data {
84 u8 isr_offset;
85 u8 imr_offset;
86 } mask[2];
87 /* + 2 bytes padding */
88};
89
90static const struct sih *sih_modules;
91static int nr_sih_modules;
92
93#define SIH_INITIALIZER(modname, nbits) \
94 .module = TWL4030_MODULE_ ## modname, \
95 .control_offset = TWL4030_ ## modname ## _SIH_CTRL, \
96 .bits = nbits, \
97 .bytes_ixr = DIV_ROUND_UP(nbits, 8), \
98 .edr_offset = TWL4030_ ## modname ## _EDR, \
99 .bytes_edr = DIV_ROUND_UP((2*(nbits)), 8), \
100 .irq_lines = 2, \
101 .mask = { { \
102 .isr_offset = TWL4030_ ## modname ## _ISR1, \
103 .imr_offset = TWL4030_ ## modname ## _IMR1, \
104 }, \
105 { \
106 .isr_offset = TWL4030_ ## modname ## _ISR2, \
107 .imr_offset = TWL4030_ ## modname ## _IMR2, \
108 }, },
109
110/* register naming policies are inconsistent ... */
111#define TWL4030_INT_PWR_EDR TWL4030_INT_PWR_EDR1
112#define TWL4030_MODULE_KEYPAD_KEYP TWL4030_MODULE_KEYPAD
113#define TWL4030_MODULE_INT_PWR TWL4030_MODULE_INT
114
115
116/*
117 * Order in this table matches order in PIH_ISR. That is,
118 * BIT(n) in PIH_ISR is sih_modules[n].
119 */
120/* sih_modules_twl4030 is used both in twl4030 and twl5030 */
121static const struct sih sih_modules_twl4030[6] = {
122 [0] = {
123 .name = "gpio",
124 .module = TWL4030_MODULE_GPIO,
125 .control_offset = REG_GPIO_SIH_CTRL,
126 .set_cor = true,
127 .bits = TWL4030_GPIO_MAX,
128 .bytes_ixr = 3,
129 /* Note: *all* of these IRQs default to no-trigger */
130 .edr_offset = REG_GPIO_EDR1,
131 .bytes_edr = 5,
132 .irq_lines = 2,
133 .mask = { {
134 .isr_offset = REG_GPIO_ISR1A,
135 .imr_offset = REG_GPIO_IMR1A,
136 }, {
137 .isr_offset = REG_GPIO_ISR1B,
138 .imr_offset = REG_GPIO_IMR1B,
139 }, },
140 },
141 [1] = {
142 .name = "keypad",
143 .set_cor = true,
144 SIH_INITIALIZER(KEYPAD_KEYP, 4)
145 },
146 [2] = {
147 .name = "bci",
148 .module = TWL4030_MODULE_INTERRUPTS,
149 .control_offset = TWL4030_INTERRUPTS_BCISIHCTRL,
150 .set_cor = true,
151 .bits = 12,
152 .bytes_ixr = 2,
153 .edr_offset = TWL4030_INTERRUPTS_BCIEDR1,
154 /* Note: most of these IRQs default to no-trigger */
155 .bytes_edr = 3,
156 .irq_lines = 2,
157 .mask = { {
158 .isr_offset = TWL4030_INTERRUPTS_BCIISR1A,
159 .imr_offset = TWL4030_INTERRUPTS_BCIIMR1A,
160 }, {
161 .isr_offset = TWL4030_INTERRUPTS_BCIISR1B,
162 .imr_offset = TWL4030_INTERRUPTS_BCIIMR1B,
163 }, },
164 },
165 [3] = {
166 .name = "madc",
167 SIH_INITIALIZER(MADC, 4)
168 },
169 [4] = {
170 /* USB doesn't use the same SIH organization */
171 .name = "usb",
172 },
173 [5] = {
174 .name = "power",
175 .set_cor = true,
176 SIH_INITIALIZER(INT_PWR, 8)
177 },
178 /* there are no SIH modules #6 or #7 ... */
179};
180
181static const struct sih sih_modules_twl5031[8] = {
182 [0] = {
183 .name = "gpio",
184 .module = TWL4030_MODULE_GPIO,
185 .control_offset = REG_GPIO_SIH_CTRL,
186 .set_cor = true,
187 .bits = TWL4030_GPIO_MAX,
188 .bytes_ixr = 3,
189 /* Note: *all* of these IRQs default to no-trigger */
190 .edr_offset = REG_GPIO_EDR1,
191 .bytes_edr = 5,
192 .irq_lines = 2,
193 .mask = { {
194 .isr_offset = REG_GPIO_ISR1A,
195 .imr_offset = REG_GPIO_IMR1A,
196 }, {
197 .isr_offset = REG_GPIO_ISR1B,
198 .imr_offset = REG_GPIO_IMR1B,
199 }, },
200 },
201 [1] = {
202 .name = "keypad",
203 .set_cor = true,
204 SIH_INITIALIZER(KEYPAD_KEYP, 4)
205 },
206 [2] = {
207 .name = "bci",
208 .module = TWL5031_MODULE_INTERRUPTS,
209 .control_offset = TWL5031_INTERRUPTS_BCISIHCTRL,
210 .bits = 7,
211 .bytes_ixr = 1,
212 .edr_offset = TWL5031_INTERRUPTS_BCIEDR1,
213 /* Note: most of these IRQs default to no-trigger */
214 .bytes_edr = 2,
215 .irq_lines = 2,
216 .mask = { {
217 .isr_offset = TWL5031_INTERRUPTS_BCIISR1,
218 .imr_offset = TWL5031_INTERRUPTS_BCIIMR1,
219 }, {
220 .isr_offset = TWL5031_INTERRUPTS_BCIISR2,
221 .imr_offset = TWL5031_INTERRUPTS_BCIIMR2,
222 }, },
223 },
224 [3] = {
225 .name = "madc",
226 SIH_INITIALIZER(MADC, 4)
227 },
228 [4] = {
229 /* USB doesn't use the same SIH organization */
230 .name = "usb",
231 },
232 [5] = {
233 .name = "power",
234 .set_cor = true,
235 SIH_INITIALIZER(INT_PWR, 8)
236 },
237 [6] = {
238 /*
239 * ECI/DBI doesn't use the same SIH organization.
240 * For example, it supports only one interrupt output line.
241 * That is, the interrupts are seen on both INT1 and INT2 lines.
242 */
243 .name = "eci_dbi",
244 .module = TWL5031_MODULE_ACCESSORY,
245 .bits = 9,
246 .bytes_ixr = 2,
247 .irq_lines = 1,
248 .mask = { {
249 .isr_offset = TWL5031_ACIIDR_LSB,
250 .imr_offset = TWL5031_ACIIMR_LSB,
251 }, },
252
253 },
254 [7] = {
255 /* Audio accessory */
256 .name = "audio",
257 .module = TWL5031_MODULE_ACCESSORY,
258 .control_offset = TWL5031_ACCSIHCTRL,
259 .bits = 2,
260 .bytes_ixr = 1,
261 .edr_offset = TWL5031_ACCEDR1,
262 /* Note: most of these IRQs default to no-trigger */
263 .bytes_edr = 1,
264 .irq_lines = 2,
265 .mask = { {
266 .isr_offset = TWL5031_ACCISR1,
267 .imr_offset = TWL5031_ACCIMR1,
268 }, {
269 .isr_offset = TWL5031_ACCISR2,
270 .imr_offset = TWL5031_ACCIMR2,
271 }, },
272 },
273};
274
275#undef TWL4030_MODULE_KEYPAD_KEYP
276#undef TWL4030_MODULE_INT_PWR
277#undef TWL4030_INT_PWR_EDR
278
279/*----------------------------------------------------------------------*/
280
281static unsigned twl4030_irq_base;
282
283/*
284 * handle_twl4030_pih() is the desc->handle method for the twl4030 interrupt.
285 * This is a chained interrupt, so there is no desc->action method for it.
286 * Now we need to query the interrupt controller in the twl4030 to determine
287 * which module is generating the interrupt request. However, we can't do i2c
288 * transactions in interrupt context, so we must defer that work to a kernel
289 * thread. All we do here is acknowledge and mask the interrupt and wakeup
290 * the kernel thread.
291 */
292static irqreturn_t handle_twl4030_pih(int irq, void *devid)
293{
294 irqreturn_t ret;
295 u8 pih_isr;
296
297 ret = twl_i2c_read_u8(TWL_MODULE_PIH, &pih_isr,
298 REG_PIH_ISR_P1);
299 if (ret) {
300 pr_warn("twl4030: I2C error %d reading PIH ISR\n", ret);
301 return IRQ_NONE;
302 }
303
304 while (pih_isr) {
305 unsigned long pending = __ffs(pih_isr);
306 unsigned int irq;
307
308 pih_isr &= ~BIT(pending);
309 irq = pending + twl4030_irq_base;
310 handle_nested_irq(irq);
311 }
312
313 return IRQ_HANDLED;
314}
315
316/*----------------------------------------------------------------------*/
317
318/*
319 * twl4030_init_sih_modules() ... start from a known state where no
320 * IRQs will be coming in, and where we can quickly enable them then
321 * handle them as they arrive. Mask all IRQs: maybe init SIH_CTRL.
322 *
323 * NOTE: we don't touch EDR registers here; they stay with hardware
324 * defaults or whatever the last value was. Note that when both EDR
325 * bits for an IRQ are clear, that's as if its IMR bit is set...
326 */
327static int twl4030_init_sih_modules(unsigned line)
328{
329 const struct sih *sih;
330 u8 buf[4];
331 int i;
332 int status;
333
334 /* line 0 == int1_n signal; line 1 == int2_n signal */
335 if (line > 1)
336 return -EINVAL;
337
338 irq_line = line;
339
340 /* disable all interrupts on our line */
341 memset(buf, 0xff, sizeof(buf));
342 sih = sih_modules;
343 for (i = 0; i < nr_sih_modules; i++, sih++) {
344 /* skip USB -- it's funky */
345 if (!sih->bytes_ixr)
346 continue;
347
348 /* Not all the SIH modules support multiple interrupt lines */
349 if (sih->irq_lines <= line)
350 continue;
351
352 status = twl_i2c_write(sih->module, buf,
353 sih->mask[line].imr_offset, sih->bytes_ixr);
354 if (status < 0)
355 pr_err("twl4030: err %d initializing %s %s\n",
356 status, sih->name, "IMR");
357
358 /*
359 * Maybe disable "exclusive" mode; buffer second pending irq;
360 * set Clear-On-Read (COR) bit.
361 *
362 * NOTE that sometimes COR polarity is documented as being
363 * inverted: for MADC, COR=1 means "clear on write".
364 * And for PWR_INT it's not documented...
365 */
366 if (sih->set_cor) {
367 status = twl_i2c_write_u8(sih->module,
368 TWL4030_SIH_CTRL_COR_MASK,
369 sih->control_offset);
370 if (status < 0)
371 pr_err("twl4030: err %d initializing %s %s\n",
372 status, sih->name, "SIH_CTRL");
373 }
374 }
375
376 sih = sih_modules;
377 for (i = 0; i < nr_sih_modules; i++, sih++) {
378 u8 rxbuf[4];
379 int j;
380
381 /* skip USB */
382 if (!sih->bytes_ixr)
383 continue;
384
385 /* Not all the SIH modules support multiple interrupt lines */
386 if (sih->irq_lines <= line)
387 continue;
388
389 /*
390 * Clear pending interrupt status. Either the read was
391 * enough, or we need to write those bits. Repeat, in
392 * case an IRQ is pending (PENDDIS=0) ... that's not
393 * uncommon with PWR_INT.PWRON.
394 */
395 for (j = 0; j < 2; j++) {
396 status = twl_i2c_read(sih->module, rxbuf,
397 sih->mask[line].isr_offset, sih->bytes_ixr);
398 if (status < 0)
399 pr_warn("twl4030: err %d initializing %s %s\n",
400 status, sih->name, "ISR");
401
402 if (!sih->set_cor) {
403 status = twl_i2c_write(sih->module, buf,
404 sih->mask[line].isr_offset,
405 sih->bytes_ixr);
406 if (status < 0)
407 pr_warn("twl4030: write failed: %d\n",
408 status);
409 }
410 /*
411 * else COR=1 means read sufficed.
412 * (for most SIH modules...)
413 */
414 }
415 }
416
417 return 0;
418}
419
420static inline void activate_irq(int irq)
421{
422 irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE);
423}
424
425/*----------------------------------------------------------------------*/
426
427struct sih_agent {
428 int irq_base;
429 const struct sih *sih;
430
431 u32 imr;
432 bool imr_change_pending;
433
434 u32 edge_change;
435
436 struct mutex irq_lock;
437 char *irq_name;
438};
439
440/*----------------------------------------------------------------------*/
441
442/*
443 * All irq_chip methods get issued from code holding irq_desc[irq].lock,
444 * which can't perform the underlying I2C operations (because they sleep).
445 * So we must hand them off to a thread (workqueue) and cope with asynch
446 * completion, potentially including some re-ordering, of these requests.
447 */
448
449static void twl4030_sih_mask(struct irq_data *data)
450{
451 struct sih_agent *agent = irq_data_get_irq_chip_data(data);
452
453 agent->imr |= BIT(data->irq - agent->irq_base);
454 agent->imr_change_pending = true;
455}
456
457static void twl4030_sih_unmask(struct irq_data *data)
458{
459 struct sih_agent *agent = irq_data_get_irq_chip_data(data);
460
461 agent->imr &= ~BIT(data->irq - agent->irq_base);
462 agent->imr_change_pending = true;
463}
464
465static int twl4030_sih_set_type(struct irq_data *data, unsigned trigger)
466{
467 struct sih_agent *agent = irq_data_get_irq_chip_data(data);
468
469 if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
470 return -EINVAL;
471
472 if (irqd_get_trigger_type(data) != trigger)
473 agent->edge_change |= BIT(data->irq - agent->irq_base);
474
475 return 0;
476}
477
478static void twl4030_sih_bus_lock(struct irq_data *data)
479{
480 struct sih_agent *agent = irq_data_get_irq_chip_data(data);
481
482 mutex_lock(&agent->irq_lock);
483}
484
485static void twl4030_sih_bus_sync_unlock(struct irq_data *data)
486{
487 struct sih_agent *agent = irq_data_get_irq_chip_data(data);
488 const struct sih *sih = agent->sih;
489 int status;
490
491 if (agent->imr_change_pending) {
492 union {
493 u32 word;
494 u8 bytes[4];
495 } imr;
496
497 /* byte[0] gets overwritten as we write ... */
498 imr.word = cpu_to_le32(agent->imr);
499 agent->imr_change_pending = false;
500
501 /* write the whole mask ... simpler than subsetting it */
502 status = twl_i2c_write(sih->module, imr.bytes,
503 sih->mask[irq_line].imr_offset,
504 sih->bytes_ixr);
505 if (status)
506 pr_err("twl4030: %s, %s --> %d\n", __func__,
507 "write", status);
508 }
509
510 if (agent->edge_change) {
511 u32 edge_change;
512 u8 bytes[6];
513
514 edge_change = agent->edge_change;
515 agent->edge_change = 0;
516
517 /*
518 * Read, reserving first byte for write scratch. Yes, this
519 * could be cached for some speedup ... but be careful about
520 * any processor on the other IRQ line, EDR registers are
521 * shared.
522 */
523 status = twl_i2c_read(sih->module, bytes,
524 sih->edr_offset, sih->bytes_edr);
525 if (status) {
526 pr_err("twl4030: %s, %s --> %d\n", __func__,
527 "read", status);
528 return;
529 }
530
531 /* Modify only the bits we know must change */
532 while (edge_change) {
533 int i = fls(edge_change) - 1;
534 int byte = i >> 2;
535 int off = (i & 0x3) * 2;
536 unsigned int type;
537
538 bytes[byte] &= ~(0x03 << off);
539
540 type = irq_get_trigger_type(i + agent->irq_base);
541 if (type & IRQ_TYPE_EDGE_RISING)
542 bytes[byte] |= BIT(off + 1);
543 if (type & IRQ_TYPE_EDGE_FALLING)
544 bytes[byte] |= BIT(off + 0);
545
546 edge_change &= ~BIT(i);
547 }
548
549 /* Write */
550 status = twl_i2c_write(sih->module, bytes,
551 sih->edr_offset, sih->bytes_edr);
552 if (status)
553 pr_err("twl4030: %s, %s --> %d\n", __func__,
554 "write", status);
555 }
556
557 mutex_unlock(&agent->irq_lock);
558}
559
560static struct irq_chip twl4030_sih_irq_chip = {
561 .name = "twl4030",
562 .irq_mask = twl4030_sih_mask,
563 .irq_unmask = twl4030_sih_unmask,
564 .irq_set_type = twl4030_sih_set_type,
565 .irq_bus_lock = twl4030_sih_bus_lock,
566 .irq_bus_sync_unlock = twl4030_sih_bus_sync_unlock,
567 .flags = IRQCHIP_SKIP_SET_WAKE,
568};
569
570/*----------------------------------------------------------------------*/
571
572static inline int sih_read_isr(const struct sih *sih)
573{
574 int status;
575 union {
576 u8 bytes[4];
577 u32 word;
578 } isr;
579
580 /* FIXME need retry-on-error ... */
581
582 isr.word = 0;
583 status = twl_i2c_read(sih->module, isr.bytes,
584 sih->mask[irq_line].isr_offset, sih->bytes_ixr);
585
586 return (status < 0) ? status : le32_to_cpu(isr.word);
587}
588
589/*
590 * Generic handler for SIH interrupts ... we "know" this is called
591 * in task context, with IRQs enabled.
592 */
593static irqreturn_t handle_twl4030_sih(int irq, void *data)
594{
595 struct sih_agent *agent = irq_get_handler_data(irq);
596 const struct sih *sih = agent->sih;
597 int isr;
598
599 /* reading ISR acks the IRQs, using clear-on-read mode */
600 isr = sih_read_isr(sih);
601
602 if (isr < 0) {
603 pr_err("twl4030: %s SIH, read ISR error %d\n",
604 sih->name, isr);
605 /* REVISIT: recover; eventually mask it all, etc */
606 return IRQ_HANDLED;
607 }
608
609 while (isr) {
610 irq = fls(isr);
611 irq--;
612 isr &= ~BIT(irq);
613
614 if (irq < sih->bits)
615 handle_nested_irq(agent->irq_base + irq);
616 else
617 pr_err("twl4030: %s SIH, invalid ISR bit %d\n",
618 sih->name, irq);
619 }
620 return IRQ_HANDLED;
621}
622
623/* returns the first IRQ used by this SIH bank, or negative errno */
624int twl4030_sih_setup(struct device *dev, int module, int irq_base)
625{
626 int sih_mod;
627 const struct sih *sih = NULL;
628 struct sih_agent *agent;
629 int i, irq;
630 int status = -EINVAL;
631
632 /* only support modules with standard clear-on-read for now */
633 for (sih_mod = 0, sih = sih_modules; sih_mod < nr_sih_modules;
634 sih_mod++, sih++) {
635 if (sih->module == module && sih->set_cor) {
636 status = 0;
637 break;
638 }
639 }
640
641 if (status < 0)
642 return status;
643
644 agent = kzalloc(sizeof(*agent), GFP_KERNEL);
645 if (!agent)
646 return -ENOMEM;
647
648 agent->irq_base = irq_base;
649 agent->sih = sih;
650 agent->imr = ~0;
651 mutex_init(&agent->irq_lock);
652
653 for (i = 0; i < sih->bits; i++) {
654 irq = irq_base + i;
655
656 irq_set_chip_data(irq, agent);
657 irq_set_chip_and_handler(irq, &twl4030_sih_irq_chip,
658 handle_edge_irq);
659 irq_set_nested_thread(irq, 1);
660 activate_irq(irq);
661 }
662
663 /* replace generic PIH handler (handle_simple_irq) */
664 irq = sih_mod + twl4030_irq_base;
665 irq_set_handler_data(irq, agent);
666 agent->irq_name = kasprintf(GFP_KERNEL, "twl4030_%s", sih->name);
667 status = request_threaded_irq(irq, NULL, handle_twl4030_sih,
668 IRQF_EARLY_RESUME | IRQF_ONESHOT,
669 agent->irq_name ?: sih->name, NULL);
670
671 dev_info(dev, "%s (irq %d) chaining IRQs %d..%d\n", sih->name,
672 irq, irq_base, irq_base + i - 1);
673
674 return status < 0 ? status : irq_base;
675}
676
677/* FIXME need a call to reverse twl4030_sih_setup() ... */
678
679/*----------------------------------------------------------------------*/
680
681/* FIXME pass in which interrupt line we'll use ... */
682#define twl_irq_line 0
683
684int twl4030_init_irq(struct device *dev, int irq_num)
685{
686 static struct irq_chip twl4030_irq_chip;
687 int status, i;
688 int irq_base, irq_end, nr_irqs;
689 struct device_node *node = dev->of_node;
690
691 /*
692 * TWL core and pwr interrupts must be contiguous because
693 * the hwirqs numbers are defined contiguously from 1 to 15.
694 * Create only one domain for both.
695 */
696 nr_irqs = TWL4030_PWR_NR_IRQS + TWL4030_CORE_NR_IRQS;
697
698 irq_base = irq_alloc_descs(-1, 0, nr_irqs, 0);
699 if (irq_base < 0) {
700 dev_err(dev, "Fail to allocate IRQ descs\n");
701 return irq_base;
702 }
703
704 irq_domain_add_legacy(node, nr_irqs, irq_base, 0,
705 &irq_domain_simple_ops, NULL);
706
707 irq_end = irq_base + TWL4030_CORE_NR_IRQS;
708
709 /*
710 * Mask and clear all TWL4030 interrupts since initially we do
711 * not have any TWL4030 module interrupt handlers present
712 */
713 status = twl4030_init_sih_modules(twl_irq_line);
714 if (status < 0)
715 return status;
716
717 twl4030_irq_base = irq_base;
718
719 /*
720 * Install an irq handler for each of the SIH modules;
721 * clone dummy irq_chip since PIH can't *do* anything
722 */
723 twl4030_irq_chip = dummy_irq_chip;
724 twl4030_irq_chip.name = "twl4030";
725
726 twl4030_sih_irq_chip.irq_ack = dummy_irq_chip.irq_ack;
727
728 for (i = irq_base; i < irq_end; i++) {
729 irq_set_chip_and_handler(i, &twl4030_irq_chip,
730 handle_simple_irq);
731 irq_set_nested_thread(i, 1);
732 activate_irq(i);
733 }
734
735 dev_info(dev, "%s (irq %d) chaining IRQs %d..%d\n", "PIH",
736 irq_num, irq_base, irq_end);
737
738 /* ... and the PWR_INT module ... */
739 status = twl4030_sih_setup(dev, TWL4030_MODULE_INT, irq_end);
740 if (status < 0) {
741 dev_err(dev, "sih_setup PWR INT --> %d\n", status);
742 goto fail;
743 }
744
745 /* install an irq handler to demultiplex the TWL4030 interrupt */
746 status = request_threaded_irq(irq_num, NULL, handle_twl4030_pih,
747 IRQF_ONESHOT,
748 "TWL4030-PIH", NULL);
749 if (status < 0) {
750 dev_err(dev, "could not claim irq%d: %d\n", irq_num, status);
751 goto fail_rqirq;
752 }
753 enable_irq_wake(irq_num);
754
755 return irq_base;
756fail_rqirq:
757 /* clean up twl4030_sih_setup */
758fail:
759 for (i = irq_base; i < irq_end; i++) {
760 irq_set_nested_thread(i, 0);
761 irq_set_chip_and_handler(i, NULL, NULL);
762 }
763
764 return status;
765}
766
767int twl4030_exit_irq(void)
768{
769 /* FIXME undo twl_init_irq() */
770 if (twl4030_irq_base) {
771 pr_err("twl4030: can't yet clean up IRQs?\n");
772 return -ENOSYS;
773 }
774 return 0;
775}
776
777int twl4030_init_chip_irq(const char *chip)
778{
779 if (!strcmp(chip, "twl5031")) {
780 sih_modules = sih_modules_twl5031;
781 nr_sih_modules = ARRAY_SIZE(sih_modules_twl5031);
782 } else {
783 sih_modules = sih_modules_twl4030;
784 nr_sih_modules = ARRAY_SIZE(sih_modules_twl4030);
785 }
786
787 return 0;
788}