Loading...
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Copyright (C) 2011 NXP Semiconductors
4 *
5 * Code portions referenced from the i2x-pxa and i2c-pnx drivers
6 *
7 * Make SMBus byte and word transactions work on LPC178x/7x
8 * Copyright (c) 2012
9 * Alexander Potashev, Emcraft Systems, aspotashev@emcraft.com
10 * Anton Protopopov, Emcraft Systems, antonp@emcraft.com
11 *
12 * Copyright (C) 2015 Joachim Eastwood <manabian@gmail.com>
13 */
14
15#include <linux/clk.h>
16#include <linux/errno.h>
17#include <linux/i2c.h>
18#include <linux/interrupt.h>
19#include <linux/io.h>
20#include <linux/kernel.h>
21#include <linux/module.h>
22#include <linux/of.h>
23#include <linux/platform_device.h>
24#include <linux/sched.h>
25#include <linux/time.h>
26
27/* LPC24xx register offsets and bits */
28#define LPC24XX_I2CONSET 0x00
29#define LPC24XX_I2STAT 0x04
30#define LPC24XX_I2DAT 0x08
31#define LPC24XX_I2ADDR 0x0c
32#define LPC24XX_I2SCLH 0x10
33#define LPC24XX_I2SCLL 0x14
34#define LPC24XX_I2CONCLR 0x18
35
36#define LPC24XX_AA BIT(2)
37#define LPC24XX_SI BIT(3)
38#define LPC24XX_STO BIT(4)
39#define LPC24XX_STA BIT(5)
40#define LPC24XX_I2EN BIT(6)
41
42#define LPC24XX_STO_AA (LPC24XX_STO | LPC24XX_AA)
43#define LPC24XX_CLEAR_ALL (LPC24XX_AA | LPC24XX_SI | LPC24XX_STO | \
44 LPC24XX_STA | LPC24XX_I2EN)
45
46/* I2C SCL clock has different duty cycle depending on mode */
47#define I2C_STD_MODE_DUTY 46
48#define I2C_FAST_MODE_DUTY 36
49#define I2C_FAST_MODE_PLUS_DUTY 38
50
51/*
52 * 26 possible I2C status codes, but codes applicable only
53 * to master are listed here and used in this driver
54 */
55enum {
56 M_BUS_ERROR = 0x00,
57 M_START = 0x08,
58 M_REPSTART = 0x10,
59 MX_ADDR_W_ACK = 0x18,
60 MX_ADDR_W_NACK = 0x20,
61 MX_DATA_W_ACK = 0x28,
62 MX_DATA_W_NACK = 0x30,
63 M_DATA_ARB_LOST = 0x38,
64 MR_ADDR_R_ACK = 0x40,
65 MR_ADDR_R_NACK = 0x48,
66 MR_DATA_R_ACK = 0x50,
67 MR_DATA_R_NACK = 0x58,
68 M_I2C_IDLE = 0xf8,
69};
70
71struct lpc2k_i2c {
72 void __iomem *base;
73 struct clk *clk;
74 int irq;
75 wait_queue_head_t wait;
76 struct i2c_adapter adap;
77 struct i2c_msg *msg;
78 int msg_idx;
79 int msg_status;
80 int is_last;
81};
82
83static void i2c_lpc2k_reset(struct lpc2k_i2c *i2c)
84{
85 /* Will force clear all statuses */
86 writel(LPC24XX_CLEAR_ALL, i2c->base + LPC24XX_I2CONCLR);
87 writel(0, i2c->base + LPC24XX_I2ADDR);
88 writel(LPC24XX_I2EN, i2c->base + LPC24XX_I2CONSET);
89}
90
91static int i2c_lpc2k_clear_arb(struct lpc2k_i2c *i2c)
92{
93 unsigned long timeout = jiffies + msecs_to_jiffies(1000);
94
95 /*
96 * If the transfer needs to abort for some reason, we'll try to
97 * force a stop condition to clear any pending bus conditions
98 */
99 writel(LPC24XX_STO, i2c->base + LPC24XX_I2CONSET);
100
101 /* Wait for status change */
102 while (readl(i2c->base + LPC24XX_I2STAT) != M_I2C_IDLE) {
103 if (time_after(jiffies, timeout)) {
104 /* Bus was not idle, try to reset adapter */
105 i2c_lpc2k_reset(i2c);
106 return -EBUSY;
107 }
108
109 cpu_relax();
110 }
111
112 return 0;
113}
114
115static void i2c_lpc2k_pump_msg(struct lpc2k_i2c *i2c)
116{
117 unsigned char data;
118 u32 status;
119
120 /*
121 * I2C in the LPC2xxx series is basically a state machine.
122 * Just run through the steps based on the current status.
123 */
124 status = readl(i2c->base + LPC24XX_I2STAT);
125
126 switch (status) {
127 case M_START:
128 case M_REPSTART:
129 /* Start bit was just sent out, send out addr and dir */
130 data = i2c_8bit_addr_from_msg(i2c->msg);
131
132 writel(data, i2c->base + LPC24XX_I2DAT);
133 writel(LPC24XX_STA, i2c->base + LPC24XX_I2CONCLR);
134 break;
135
136 case MX_ADDR_W_ACK:
137 case MX_DATA_W_ACK:
138 /*
139 * Address or data was sent out with an ACK. If there is more
140 * data to send, send it now
141 */
142 if (i2c->msg_idx < i2c->msg->len) {
143 writel(i2c->msg->buf[i2c->msg_idx],
144 i2c->base + LPC24XX_I2DAT);
145 } else if (i2c->is_last) {
146 /* Last message, send stop */
147 writel(LPC24XX_STO_AA, i2c->base + LPC24XX_I2CONSET);
148 writel(LPC24XX_SI, i2c->base + LPC24XX_I2CONCLR);
149 i2c->msg_status = 0;
150 disable_irq_nosync(i2c->irq);
151 } else {
152 i2c->msg_status = 0;
153 disable_irq_nosync(i2c->irq);
154 }
155
156 i2c->msg_idx++;
157 break;
158
159 case MR_ADDR_R_ACK:
160 /* Receive first byte from slave */
161 if (i2c->msg->len == 1) {
162 /* Last byte, return NACK */
163 writel(LPC24XX_AA, i2c->base + LPC24XX_I2CONCLR);
164 } else {
165 /* Not last byte, return ACK */
166 writel(LPC24XX_AA, i2c->base + LPC24XX_I2CONSET);
167 }
168
169 writel(LPC24XX_STA, i2c->base + LPC24XX_I2CONCLR);
170 break;
171
172 case MR_DATA_R_NACK:
173 /*
174 * The I2C shows NACK status on reads, so we need to accept
175 * the NACK as an ACK here. This should be ok, as the real
176 * BACK would of been caught on the address write.
177 */
178 case MR_DATA_R_ACK:
179 /* Data was received */
180 if (i2c->msg_idx < i2c->msg->len) {
181 i2c->msg->buf[i2c->msg_idx] =
182 readl(i2c->base + LPC24XX_I2DAT);
183 }
184
185 /* If transfer is done, send STOP */
186 if (i2c->msg_idx >= i2c->msg->len - 1 && i2c->is_last) {
187 writel(LPC24XX_STO_AA, i2c->base + LPC24XX_I2CONSET);
188 writel(LPC24XX_SI, i2c->base + LPC24XX_I2CONCLR);
189 i2c->msg_status = 0;
190 }
191
192 /* Message is done */
193 if (i2c->msg_idx >= i2c->msg->len - 1) {
194 i2c->msg_status = 0;
195 disable_irq_nosync(i2c->irq);
196 }
197
198 /*
199 * One pre-last data input, send NACK to tell the slave that
200 * this is going to be the last data byte to be transferred.
201 */
202 if (i2c->msg_idx >= i2c->msg->len - 2) {
203 /* One byte left to receive - NACK */
204 writel(LPC24XX_AA, i2c->base + LPC24XX_I2CONCLR);
205 } else {
206 /* More than one byte left to receive - ACK */
207 writel(LPC24XX_AA, i2c->base + LPC24XX_I2CONSET);
208 }
209
210 writel(LPC24XX_STA, i2c->base + LPC24XX_I2CONCLR);
211 i2c->msg_idx++;
212 break;
213
214 case MX_ADDR_W_NACK:
215 case MX_DATA_W_NACK:
216 case MR_ADDR_R_NACK:
217 /* NACK processing is done */
218 writel(LPC24XX_STO_AA, i2c->base + LPC24XX_I2CONSET);
219 i2c->msg_status = -ENXIO;
220 disable_irq_nosync(i2c->irq);
221 break;
222
223 case M_DATA_ARB_LOST:
224 /* Arbitration lost */
225 i2c->msg_status = -EAGAIN;
226
227 /* Release the I2C bus */
228 writel(LPC24XX_STA | LPC24XX_STO, i2c->base + LPC24XX_I2CONCLR);
229 disable_irq_nosync(i2c->irq);
230 break;
231
232 default:
233 /* Unexpected statuses */
234 i2c->msg_status = -EIO;
235 disable_irq_nosync(i2c->irq);
236 break;
237 }
238
239 /* Exit on failure or all bytes transferred */
240 if (i2c->msg_status != -EBUSY)
241 wake_up(&i2c->wait);
242
243 /*
244 * If `msg_status` is zero, then `lpc2k_process_msg()`
245 * is responsible for clearing the SI flag.
246 */
247 if (i2c->msg_status != 0)
248 writel(LPC24XX_SI, i2c->base + LPC24XX_I2CONCLR);
249}
250
251static int lpc2k_process_msg(struct lpc2k_i2c *i2c, int msgidx)
252{
253 /* A new transfer is kicked off by initiating a start condition */
254 if (!msgidx) {
255 writel(LPC24XX_STA, i2c->base + LPC24XX_I2CONSET);
256 } else {
257 /*
258 * A multi-message I2C transfer continues where the
259 * previous I2C transfer left off and uses the
260 * current condition of the I2C adapter.
261 */
262 if (unlikely(i2c->msg->flags & I2C_M_NOSTART)) {
263 WARN_ON(i2c->msg->len == 0);
264
265 if (!(i2c->msg->flags & I2C_M_RD)) {
266 /* Start transmit of data */
267 writel(i2c->msg->buf[0],
268 i2c->base + LPC24XX_I2DAT);
269 i2c->msg_idx++;
270 }
271 } else {
272 /* Start or repeated start */
273 writel(LPC24XX_STA, i2c->base + LPC24XX_I2CONSET);
274 }
275
276 writel(LPC24XX_SI, i2c->base + LPC24XX_I2CONCLR);
277 }
278
279 enable_irq(i2c->irq);
280
281 /* Wait for transfer completion */
282 if (wait_event_timeout(i2c->wait, i2c->msg_status != -EBUSY,
283 msecs_to_jiffies(1000)) == 0) {
284 disable_irq_nosync(i2c->irq);
285
286 return -ETIMEDOUT;
287 }
288
289 return i2c->msg_status;
290}
291
292static int i2c_lpc2k_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
293 int msg_num)
294{
295 struct lpc2k_i2c *i2c = i2c_get_adapdata(adap);
296 int ret, i;
297 u32 stat;
298
299 /* Check for bus idle condition */
300 stat = readl(i2c->base + LPC24XX_I2STAT);
301 if (stat != M_I2C_IDLE) {
302 /* Something is holding the bus, try to clear it */
303 return i2c_lpc2k_clear_arb(i2c);
304 }
305
306 /* Process a single message at a time */
307 for (i = 0; i < msg_num; i++) {
308 /* Save message pointer and current message data index */
309 i2c->msg = &msgs[i];
310 i2c->msg_idx = 0;
311 i2c->msg_status = -EBUSY;
312 i2c->is_last = (i == (msg_num - 1));
313
314 ret = lpc2k_process_msg(i2c, i);
315 if (ret)
316 return ret;
317 }
318
319 return msg_num;
320}
321
322static irqreturn_t i2c_lpc2k_handler(int irq, void *dev_id)
323{
324 struct lpc2k_i2c *i2c = dev_id;
325
326 if (readl(i2c->base + LPC24XX_I2CONSET) & LPC24XX_SI) {
327 i2c_lpc2k_pump_msg(i2c);
328 return IRQ_HANDLED;
329 }
330
331 return IRQ_NONE;
332}
333
334static u32 i2c_lpc2k_functionality(struct i2c_adapter *adap)
335{
336 /* Only emulated SMBus for now */
337 return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
338}
339
340static const struct i2c_algorithm i2c_lpc2k_algorithm = {
341 .master_xfer = i2c_lpc2k_xfer,
342 .functionality = i2c_lpc2k_functionality,
343};
344
345static int i2c_lpc2k_probe(struct platform_device *pdev)
346{
347 struct lpc2k_i2c *i2c;
348 u32 bus_clk_rate;
349 u32 scl_high;
350 u32 clkrate;
351 int ret;
352
353 i2c = devm_kzalloc(&pdev->dev, sizeof(*i2c), GFP_KERNEL);
354 if (!i2c)
355 return -ENOMEM;
356
357 i2c->base = devm_platform_ioremap_resource(pdev, 0);
358 if (IS_ERR(i2c->base))
359 return PTR_ERR(i2c->base);
360
361 i2c->irq = platform_get_irq(pdev, 0);
362 if (i2c->irq < 0)
363 return i2c->irq;
364
365 init_waitqueue_head(&i2c->wait);
366
367 i2c->clk = devm_clk_get_enabled(&pdev->dev, NULL);
368 if (IS_ERR(i2c->clk)) {
369 dev_err(&pdev->dev, "failed to enable clock.\n");
370 return PTR_ERR(i2c->clk);
371 }
372
373 ret = devm_request_irq(&pdev->dev, i2c->irq, i2c_lpc2k_handler, 0,
374 dev_name(&pdev->dev), i2c);
375 if (ret < 0) {
376 dev_err(&pdev->dev, "can't request interrupt.\n");
377 return ret;
378 }
379
380 disable_irq_nosync(i2c->irq);
381
382 /* Place controller is a known state */
383 i2c_lpc2k_reset(i2c);
384
385 ret = of_property_read_u32(pdev->dev.of_node, "clock-frequency",
386 &bus_clk_rate);
387 if (ret)
388 bus_clk_rate = I2C_MAX_STANDARD_MODE_FREQ;
389
390 clkrate = clk_get_rate(i2c->clk);
391 if (clkrate == 0) {
392 dev_err(&pdev->dev, "can't get I2C base clock\n");
393 return -EINVAL;
394 }
395
396 /* Setup I2C dividers to generate clock with proper duty cycle */
397 clkrate = clkrate / bus_clk_rate;
398 if (bus_clk_rate <= I2C_MAX_STANDARD_MODE_FREQ)
399 scl_high = (clkrate * I2C_STD_MODE_DUTY) / 100;
400 else if (bus_clk_rate <= I2C_MAX_FAST_MODE_FREQ)
401 scl_high = (clkrate * I2C_FAST_MODE_DUTY) / 100;
402 else
403 scl_high = (clkrate * I2C_FAST_MODE_PLUS_DUTY) / 100;
404
405 writel(scl_high, i2c->base + LPC24XX_I2SCLH);
406 writel(clkrate - scl_high, i2c->base + LPC24XX_I2SCLL);
407
408 platform_set_drvdata(pdev, i2c);
409
410 i2c_set_adapdata(&i2c->adap, i2c);
411 i2c->adap.owner = THIS_MODULE;
412 strscpy(i2c->adap.name, "LPC2K I2C adapter", sizeof(i2c->adap.name));
413 i2c->adap.algo = &i2c_lpc2k_algorithm;
414 i2c->adap.dev.parent = &pdev->dev;
415 i2c->adap.dev.of_node = pdev->dev.of_node;
416
417 ret = i2c_add_adapter(&i2c->adap);
418 if (ret < 0)
419 return ret;
420
421 dev_info(&pdev->dev, "LPC2K I2C adapter\n");
422
423 return 0;
424}
425
426static void i2c_lpc2k_remove(struct platform_device *dev)
427{
428 struct lpc2k_i2c *i2c = platform_get_drvdata(dev);
429
430 i2c_del_adapter(&i2c->adap);
431}
432
433static int i2c_lpc2k_suspend(struct device *dev)
434{
435 struct lpc2k_i2c *i2c = dev_get_drvdata(dev);
436
437 clk_disable(i2c->clk);
438
439 return 0;
440}
441
442static int i2c_lpc2k_resume(struct device *dev)
443{
444 struct lpc2k_i2c *i2c = dev_get_drvdata(dev);
445
446 clk_enable(i2c->clk);
447 i2c_lpc2k_reset(i2c);
448
449 return 0;
450}
451
452static const struct dev_pm_ops i2c_lpc2k_dev_pm_ops = {
453 .suspend_noirq = i2c_lpc2k_suspend,
454 .resume_noirq = i2c_lpc2k_resume,
455};
456
457static const struct of_device_id lpc2k_i2c_match[] = {
458 { .compatible = "nxp,lpc1788-i2c" },
459 {},
460};
461MODULE_DEVICE_TABLE(of, lpc2k_i2c_match);
462
463static struct platform_driver i2c_lpc2k_driver = {
464 .probe = i2c_lpc2k_probe,
465 .remove_new = i2c_lpc2k_remove,
466 .driver = {
467 .name = "lpc2k-i2c",
468 .pm = pm_sleep_ptr(&i2c_lpc2k_dev_pm_ops),
469 .of_match_table = lpc2k_i2c_match,
470 },
471};
472module_platform_driver(i2c_lpc2k_driver);
473
474MODULE_AUTHOR("Kevin Wells <kevin.wells@nxp.com>");
475MODULE_DESCRIPTION("I2C driver for LPC2xxx devices");
476MODULE_LICENSE("GPL");
477MODULE_ALIAS("platform:lpc2k-i2c");
1/*
2 * Copyright (C) 2011 NXP Semiconductors
3 *
4 * Code portions referenced from the i2x-pxa and i2c-pnx drivers
5 *
6 * Make SMBus byte and word transactions work on LPC178x/7x
7 * Copyright (c) 2012
8 * Alexander Potashev, Emcraft Systems, aspotashev@emcraft.com
9 * Anton Protopopov, Emcraft Systems, antonp@emcraft.com
10 *
11 * Copyright (C) 2015 Joachim Eastwood <manabian@gmail.com>
12 *
13 * This program is free software; you can redistribute it and/or modify
14 * it under the terms of the GNU General Public License as published by
15 * the Free Software Foundation; either version 2 of the License, or
16 * (at your option) any later version.
17 *
18 */
19
20#include <linux/clk.h>
21#include <linux/errno.h>
22#include <linux/i2c.h>
23#include <linux/interrupt.h>
24#include <linux/io.h>
25#include <linux/kernel.h>
26#include <linux/module.h>
27#include <linux/of.h>
28#include <linux/of_device.h>
29#include <linux/platform_device.h>
30#include <linux/sched.h>
31#include <linux/time.h>
32
33/* LPC24xx register offsets and bits */
34#define LPC24XX_I2CONSET 0x00
35#define LPC24XX_I2STAT 0x04
36#define LPC24XX_I2DAT 0x08
37#define LPC24XX_I2ADDR 0x0c
38#define LPC24XX_I2SCLH 0x10
39#define LPC24XX_I2SCLL 0x14
40#define LPC24XX_I2CONCLR 0x18
41
42#define LPC24XX_AA BIT(2)
43#define LPC24XX_SI BIT(3)
44#define LPC24XX_STO BIT(4)
45#define LPC24XX_STA BIT(5)
46#define LPC24XX_I2EN BIT(6)
47
48#define LPC24XX_STO_AA (LPC24XX_STO | LPC24XX_AA)
49#define LPC24XX_CLEAR_ALL (LPC24XX_AA | LPC24XX_SI | LPC24XX_STO | \
50 LPC24XX_STA | LPC24XX_I2EN)
51
52/* I2C SCL clock has different duty cycle depending on mode */
53#define I2C_STD_MODE_DUTY 46
54#define I2C_FAST_MODE_DUTY 36
55#define I2C_FAST_MODE_PLUS_DUTY 38
56
57/*
58 * 26 possible I2C status codes, but codes applicable only
59 * to master are listed here and used in this driver
60 */
61enum {
62 M_BUS_ERROR = 0x00,
63 M_START = 0x08,
64 M_REPSTART = 0x10,
65 MX_ADDR_W_ACK = 0x18,
66 MX_ADDR_W_NACK = 0x20,
67 MX_DATA_W_ACK = 0x28,
68 MX_DATA_W_NACK = 0x30,
69 M_DATA_ARB_LOST = 0x38,
70 MR_ADDR_R_ACK = 0x40,
71 MR_ADDR_R_NACK = 0x48,
72 MR_DATA_R_ACK = 0x50,
73 MR_DATA_R_NACK = 0x58,
74 M_I2C_IDLE = 0xf8,
75};
76
77struct lpc2k_i2c {
78 void __iomem *base;
79 struct clk *clk;
80 int irq;
81 wait_queue_head_t wait;
82 struct i2c_adapter adap;
83 struct i2c_msg *msg;
84 int msg_idx;
85 int msg_status;
86 int is_last;
87};
88
89static void i2c_lpc2k_reset(struct lpc2k_i2c *i2c)
90{
91 /* Will force clear all statuses */
92 writel(LPC24XX_CLEAR_ALL, i2c->base + LPC24XX_I2CONCLR);
93 writel(0, i2c->base + LPC24XX_I2ADDR);
94 writel(LPC24XX_I2EN, i2c->base + LPC24XX_I2CONSET);
95}
96
97static int i2c_lpc2k_clear_arb(struct lpc2k_i2c *i2c)
98{
99 unsigned long timeout = jiffies + msecs_to_jiffies(1000);
100
101 /*
102 * If the transfer needs to abort for some reason, we'll try to
103 * force a stop condition to clear any pending bus conditions
104 */
105 writel(LPC24XX_STO, i2c->base + LPC24XX_I2CONSET);
106
107 /* Wait for status change */
108 while (readl(i2c->base + LPC24XX_I2STAT) != M_I2C_IDLE) {
109 if (time_after(jiffies, timeout)) {
110 /* Bus was not idle, try to reset adapter */
111 i2c_lpc2k_reset(i2c);
112 return -EBUSY;
113 }
114
115 cpu_relax();
116 }
117
118 return 0;
119}
120
121static void i2c_lpc2k_pump_msg(struct lpc2k_i2c *i2c)
122{
123 unsigned char data;
124 u32 status;
125
126 /*
127 * I2C in the LPC2xxx series is basically a state machine.
128 * Just run through the steps based on the current status.
129 */
130 status = readl(i2c->base + LPC24XX_I2STAT);
131
132 switch (status) {
133 case M_START:
134 case M_REPSTART:
135 /* Start bit was just sent out, send out addr and dir */
136 data = i2c_8bit_addr_from_msg(i2c->msg);
137
138 writel(data, i2c->base + LPC24XX_I2DAT);
139 writel(LPC24XX_STA, i2c->base + LPC24XX_I2CONCLR);
140 break;
141
142 case MX_ADDR_W_ACK:
143 case MX_DATA_W_ACK:
144 /*
145 * Address or data was sent out with an ACK. If there is more
146 * data to send, send it now
147 */
148 if (i2c->msg_idx < i2c->msg->len) {
149 writel(i2c->msg->buf[i2c->msg_idx],
150 i2c->base + LPC24XX_I2DAT);
151 } else if (i2c->is_last) {
152 /* Last message, send stop */
153 writel(LPC24XX_STO_AA, i2c->base + LPC24XX_I2CONSET);
154 writel(LPC24XX_SI, i2c->base + LPC24XX_I2CONCLR);
155 i2c->msg_status = 0;
156 disable_irq_nosync(i2c->irq);
157 } else {
158 i2c->msg_status = 0;
159 disable_irq_nosync(i2c->irq);
160 }
161
162 i2c->msg_idx++;
163 break;
164
165 case MR_ADDR_R_ACK:
166 /* Receive first byte from slave */
167 if (i2c->msg->len == 1) {
168 /* Last byte, return NACK */
169 writel(LPC24XX_AA, i2c->base + LPC24XX_I2CONCLR);
170 } else {
171 /* Not last byte, return ACK */
172 writel(LPC24XX_AA, i2c->base + LPC24XX_I2CONSET);
173 }
174
175 writel(LPC24XX_STA, i2c->base + LPC24XX_I2CONCLR);
176 break;
177
178 case MR_DATA_R_NACK:
179 /*
180 * The I2C shows NACK status on reads, so we need to accept
181 * the NACK as an ACK here. This should be ok, as the real
182 * BACK would of been caught on the address write.
183 */
184 case MR_DATA_R_ACK:
185 /* Data was received */
186 if (i2c->msg_idx < i2c->msg->len) {
187 i2c->msg->buf[i2c->msg_idx] =
188 readl(i2c->base + LPC24XX_I2DAT);
189 }
190
191 /* If transfer is done, send STOP */
192 if (i2c->msg_idx >= i2c->msg->len - 1 && i2c->is_last) {
193 writel(LPC24XX_STO_AA, i2c->base + LPC24XX_I2CONSET);
194 writel(LPC24XX_SI, i2c->base + LPC24XX_I2CONCLR);
195 i2c->msg_status = 0;
196 }
197
198 /* Message is done */
199 if (i2c->msg_idx >= i2c->msg->len - 1) {
200 i2c->msg_status = 0;
201 disable_irq_nosync(i2c->irq);
202 }
203
204 /*
205 * One pre-last data input, send NACK to tell the slave that
206 * this is going to be the last data byte to be transferred.
207 */
208 if (i2c->msg_idx >= i2c->msg->len - 2) {
209 /* One byte left to receive - NACK */
210 writel(LPC24XX_AA, i2c->base + LPC24XX_I2CONCLR);
211 } else {
212 /* More than one byte left to receive - ACK */
213 writel(LPC24XX_AA, i2c->base + LPC24XX_I2CONSET);
214 }
215
216 writel(LPC24XX_STA, i2c->base + LPC24XX_I2CONCLR);
217 i2c->msg_idx++;
218 break;
219
220 case MX_ADDR_W_NACK:
221 case MX_DATA_W_NACK:
222 case MR_ADDR_R_NACK:
223 /* NACK processing is done */
224 writel(LPC24XX_STO_AA, i2c->base + LPC24XX_I2CONSET);
225 i2c->msg_status = -ENXIO;
226 disable_irq_nosync(i2c->irq);
227 break;
228
229 case M_DATA_ARB_LOST:
230 /* Arbitration lost */
231 i2c->msg_status = -EAGAIN;
232
233 /* Release the I2C bus */
234 writel(LPC24XX_STA | LPC24XX_STO, i2c->base + LPC24XX_I2CONCLR);
235 disable_irq_nosync(i2c->irq);
236 break;
237
238 default:
239 /* Unexpected statuses */
240 i2c->msg_status = -EIO;
241 disable_irq_nosync(i2c->irq);
242 break;
243 }
244
245 /* Exit on failure or all bytes transferred */
246 if (i2c->msg_status != -EBUSY)
247 wake_up(&i2c->wait);
248
249 /*
250 * If `msg_status` is zero, then `lpc2k_process_msg()`
251 * is responsible for clearing the SI flag.
252 */
253 if (i2c->msg_status != 0)
254 writel(LPC24XX_SI, i2c->base + LPC24XX_I2CONCLR);
255}
256
257static int lpc2k_process_msg(struct lpc2k_i2c *i2c, int msgidx)
258{
259 /* A new transfer is kicked off by initiating a start condition */
260 if (!msgidx) {
261 writel(LPC24XX_STA, i2c->base + LPC24XX_I2CONSET);
262 } else {
263 /*
264 * A multi-message I2C transfer continues where the
265 * previous I2C transfer left off and uses the
266 * current condition of the I2C adapter.
267 */
268 if (unlikely(i2c->msg->flags & I2C_M_NOSTART)) {
269 WARN_ON(i2c->msg->len == 0);
270
271 if (!(i2c->msg->flags & I2C_M_RD)) {
272 /* Start transmit of data */
273 writel(i2c->msg->buf[0],
274 i2c->base + LPC24XX_I2DAT);
275 i2c->msg_idx++;
276 }
277 } else {
278 /* Start or repeated start */
279 writel(LPC24XX_STA, i2c->base + LPC24XX_I2CONSET);
280 }
281
282 writel(LPC24XX_SI, i2c->base + LPC24XX_I2CONCLR);
283 }
284
285 enable_irq(i2c->irq);
286
287 /* Wait for transfer completion */
288 if (wait_event_timeout(i2c->wait, i2c->msg_status != -EBUSY,
289 msecs_to_jiffies(1000)) == 0) {
290 disable_irq_nosync(i2c->irq);
291
292 return -ETIMEDOUT;
293 }
294
295 return i2c->msg_status;
296}
297
298static int i2c_lpc2k_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
299 int msg_num)
300{
301 struct lpc2k_i2c *i2c = i2c_get_adapdata(adap);
302 int ret, i;
303 u32 stat;
304
305 /* Check for bus idle condition */
306 stat = readl(i2c->base + LPC24XX_I2STAT);
307 if (stat != M_I2C_IDLE) {
308 /* Something is holding the bus, try to clear it */
309 return i2c_lpc2k_clear_arb(i2c);
310 }
311
312 /* Process a single message at a time */
313 for (i = 0; i < msg_num; i++) {
314 /* Save message pointer and current message data index */
315 i2c->msg = &msgs[i];
316 i2c->msg_idx = 0;
317 i2c->msg_status = -EBUSY;
318 i2c->is_last = (i == (msg_num - 1));
319
320 ret = lpc2k_process_msg(i2c, i);
321 if (ret)
322 return ret;
323 }
324
325 return msg_num;
326}
327
328static irqreturn_t i2c_lpc2k_handler(int irq, void *dev_id)
329{
330 struct lpc2k_i2c *i2c = dev_id;
331
332 if (readl(i2c->base + LPC24XX_I2CONSET) & LPC24XX_SI) {
333 i2c_lpc2k_pump_msg(i2c);
334 return IRQ_HANDLED;
335 }
336
337 return IRQ_NONE;
338}
339
340static u32 i2c_lpc2k_functionality(struct i2c_adapter *adap)
341{
342 /* Only emulated SMBus for now */
343 return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
344}
345
346static const struct i2c_algorithm i2c_lpc2k_algorithm = {
347 .master_xfer = i2c_lpc2k_xfer,
348 .functionality = i2c_lpc2k_functionality,
349};
350
351static int i2c_lpc2k_probe(struct platform_device *pdev)
352{
353 struct lpc2k_i2c *i2c;
354 struct resource *res;
355 u32 bus_clk_rate;
356 u32 scl_high;
357 u32 clkrate;
358 int ret;
359
360 i2c = devm_kzalloc(&pdev->dev, sizeof(*i2c), GFP_KERNEL);
361 if (!i2c)
362 return -ENOMEM;
363
364 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
365 i2c->base = devm_ioremap_resource(&pdev->dev, res);
366 if (IS_ERR(i2c->base))
367 return PTR_ERR(i2c->base);
368
369 i2c->irq = platform_get_irq(pdev, 0);
370 if (i2c->irq < 0) {
371 dev_err(&pdev->dev, "can't get interrupt resource\n");
372 return i2c->irq;
373 }
374
375 init_waitqueue_head(&i2c->wait);
376
377 i2c->clk = devm_clk_get(&pdev->dev, NULL);
378 if (IS_ERR(i2c->clk)) {
379 dev_err(&pdev->dev, "error getting clock\n");
380 return PTR_ERR(i2c->clk);
381 }
382
383 ret = clk_prepare_enable(i2c->clk);
384 if (ret) {
385 dev_err(&pdev->dev, "unable to enable clock.\n");
386 return ret;
387 }
388
389 ret = devm_request_irq(&pdev->dev, i2c->irq, i2c_lpc2k_handler, 0,
390 dev_name(&pdev->dev), i2c);
391 if (ret < 0) {
392 dev_err(&pdev->dev, "can't request interrupt.\n");
393 goto fail_clk;
394 }
395
396 disable_irq_nosync(i2c->irq);
397
398 /* Place controller is a known state */
399 i2c_lpc2k_reset(i2c);
400
401 ret = of_property_read_u32(pdev->dev.of_node, "clock-frequency",
402 &bus_clk_rate);
403 if (ret)
404 bus_clk_rate = 100000; /* 100 kHz default clock rate */
405
406 clkrate = clk_get_rate(i2c->clk);
407 if (clkrate == 0) {
408 dev_err(&pdev->dev, "can't get I2C base clock\n");
409 ret = -EINVAL;
410 goto fail_clk;
411 }
412
413 /* Setup I2C dividers to generate clock with proper duty cycle */
414 clkrate = clkrate / bus_clk_rate;
415 if (bus_clk_rate <= 100000)
416 scl_high = (clkrate * I2C_STD_MODE_DUTY) / 100;
417 else if (bus_clk_rate <= 400000)
418 scl_high = (clkrate * I2C_FAST_MODE_DUTY) / 100;
419 else
420 scl_high = (clkrate * I2C_FAST_MODE_PLUS_DUTY) / 100;
421
422 writel(scl_high, i2c->base + LPC24XX_I2SCLH);
423 writel(clkrate - scl_high, i2c->base + LPC24XX_I2SCLL);
424
425 platform_set_drvdata(pdev, i2c);
426
427 i2c_set_adapdata(&i2c->adap, i2c);
428 i2c->adap.owner = THIS_MODULE;
429 strlcpy(i2c->adap.name, "LPC2K I2C adapter", sizeof(i2c->adap.name));
430 i2c->adap.algo = &i2c_lpc2k_algorithm;
431 i2c->adap.dev.parent = &pdev->dev;
432 i2c->adap.dev.of_node = pdev->dev.of_node;
433
434 ret = i2c_add_adapter(&i2c->adap);
435 if (ret < 0)
436 goto fail_clk;
437
438 dev_info(&pdev->dev, "LPC2K I2C adapter\n");
439
440 return 0;
441
442fail_clk:
443 clk_disable_unprepare(i2c->clk);
444 return ret;
445}
446
447static int i2c_lpc2k_remove(struct platform_device *dev)
448{
449 struct lpc2k_i2c *i2c = platform_get_drvdata(dev);
450
451 i2c_del_adapter(&i2c->adap);
452 clk_disable_unprepare(i2c->clk);
453
454 return 0;
455}
456
457#ifdef CONFIG_PM
458static int i2c_lpc2k_suspend(struct device *dev)
459{
460 struct platform_device *pdev = to_platform_device(dev);
461 struct lpc2k_i2c *i2c = platform_get_drvdata(pdev);
462
463 clk_disable(i2c->clk);
464
465 return 0;
466}
467
468static int i2c_lpc2k_resume(struct device *dev)
469{
470 struct platform_device *pdev = to_platform_device(dev);
471 struct lpc2k_i2c *i2c = platform_get_drvdata(pdev);
472
473 clk_enable(i2c->clk);
474 i2c_lpc2k_reset(i2c);
475
476 return 0;
477}
478
479static const struct dev_pm_ops i2c_lpc2k_dev_pm_ops = {
480 .suspend_noirq = i2c_lpc2k_suspend,
481 .resume_noirq = i2c_lpc2k_resume,
482};
483
484#define I2C_LPC2K_DEV_PM_OPS (&i2c_lpc2k_dev_pm_ops)
485#else
486#define I2C_LPC2K_DEV_PM_OPS NULL
487#endif
488
489static const struct of_device_id lpc2k_i2c_match[] = {
490 { .compatible = "nxp,lpc1788-i2c" },
491 {},
492};
493MODULE_DEVICE_TABLE(of, lpc2k_i2c_match);
494
495static struct platform_driver i2c_lpc2k_driver = {
496 .probe = i2c_lpc2k_probe,
497 .remove = i2c_lpc2k_remove,
498 .driver = {
499 .name = "lpc2k-i2c",
500 .pm = I2C_LPC2K_DEV_PM_OPS,
501 .of_match_table = lpc2k_i2c_match,
502 },
503};
504module_platform_driver(i2c_lpc2k_driver);
505
506MODULE_AUTHOR("Kevin Wells <kevin.wells@nxp.com>");
507MODULE_DESCRIPTION("I2C driver for LPC2xxx devices");
508MODULE_LICENSE("GPL");
509MODULE_ALIAS("platform:lpc2k-i2c");