Loading...
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * scsi.c Copyright (C) 1992 Drew Eckhardt
4 * Copyright (C) 1993, 1994, 1995, 1999 Eric Youngdale
5 * Copyright (C) 2002, 2003 Christoph Hellwig
6 *
7 * generic mid-level SCSI driver
8 * Initial versions: Drew Eckhardt
9 * Subsequent revisions: Eric Youngdale
10 *
11 * <drew@colorado.edu>
12 *
13 * Bug correction thanks go to :
14 * Rik Faith <faith@cs.unc.edu>
15 * Tommy Thorn <tthorn>
16 * Thomas Wuensche <tw@fgb1.fgb.mw.tu-muenchen.de>
17 *
18 * Modified by Eric Youngdale eric@andante.org or ericy@gnu.ai.mit.edu to
19 * add scatter-gather, multiple outstanding request, and other
20 * enhancements.
21 *
22 * Native multichannel, wide scsi, /proc/scsi and hot plugging
23 * support added by Michael Neuffer <mike@i-connect.net>
24 *
25 * Added request_module("scsi_hostadapter") for kerneld:
26 * (Put an "alias scsi_hostadapter your_hostadapter" in /etc/modprobe.conf)
27 * Bjorn Ekwall <bj0rn@blox.se>
28 * (changed to kmod)
29 *
30 * Major improvements to the timeout, abort, and reset processing,
31 * as well as performance modifications for large queue depths by
32 * Leonard N. Zubkoff <lnz@dandelion.com>
33 *
34 * Converted cli() code to spinlocks, Ingo Molnar
35 *
36 * Jiffies wrap fixes (host->resetting), 3 Dec 1998 Andrea Arcangeli
37 *
38 * out_of_space hacks, D. Gilbert (dpg) 990608
39 */
40
41#include <linux/module.h>
42#include <linux/moduleparam.h>
43#include <linux/kernel.h>
44#include <linux/timer.h>
45#include <linux/string.h>
46#include <linux/slab.h>
47#include <linux/blkdev.h>
48#include <linux/delay.h>
49#include <linux/init.h>
50#include <linux/completion.h>
51#include <linux/unistd.h>
52#include <linux/spinlock.h>
53#include <linux/kmod.h>
54#include <linux/interrupt.h>
55#include <linux/notifier.h>
56#include <linux/cpu.h>
57#include <linux/mutex.h>
58#include <asm/unaligned.h>
59
60#include <scsi/scsi.h>
61#include <scsi/scsi_cmnd.h>
62#include <scsi/scsi_dbg.h>
63#include <scsi/scsi_device.h>
64#include <scsi/scsi_driver.h>
65#include <scsi/scsi_eh.h>
66#include <scsi/scsi_host.h>
67#include <scsi/scsi_tcq.h>
68
69#include "scsi_priv.h"
70#include "scsi_logging.h"
71
72#define CREATE_TRACE_POINTS
73#include <trace/events/scsi.h>
74
75/*
76 * Definitions and constants.
77 */
78
79/*
80 * Note - the initial logging level can be set here to log events at boot time.
81 * After the system is up, you may enable logging via the /proc interface.
82 */
83unsigned int scsi_logging_level;
84#if defined(CONFIG_SCSI_LOGGING)
85EXPORT_SYMBOL(scsi_logging_level);
86#endif
87
88#ifdef CONFIG_SCSI_LOGGING
89void scsi_log_send(struct scsi_cmnd *cmd)
90{
91 unsigned int level;
92
93 /*
94 * If ML QUEUE log level is greater than or equal to:
95 *
96 * 1: nothing (match completion)
97 *
98 * 2: log opcode + command of all commands + cmd address
99 *
100 * 3: same as 2
101 *
102 * 4: same as 3
103 */
104 if (unlikely(scsi_logging_level)) {
105 level = SCSI_LOG_LEVEL(SCSI_LOG_MLQUEUE_SHIFT,
106 SCSI_LOG_MLQUEUE_BITS);
107 if (level > 1) {
108 scmd_printk(KERN_INFO, cmd,
109 "Send: scmd 0x%p\n", cmd);
110 scsi_print_command(cmd);
111 }
112 }
113}
114
115void scsi_log_completion(struct scsi_cmnd *cmd, int disposition)
116{
117 unsigned int level;
118
119 /*
120 * If ML COMPLETE log level is greater than or equal to:
121 *
122 * 1: log disposition, result, opcode + command, and conditionally
123 * sense data for failures or non SUCCESS dispositions.
124 *
125 * 2: same as 1 but for all command completions.
126 *
127 * 3: same as 2
128 *
129 * 4: same as 3 plus dump extra junk
130 */
131 if (unlikely(scsi_logging_level)) {
132 level = SCSI_LOG_LEVEL(SCSI_LOG_MLCOMPLETE_SHIFT,
133 SCSI_LOG_MLCOMPLETE_BITS);
134 if (((level > 0) && (cmd->result || disposition != SUCCESS)) ||
135 (level > 1)) {
136 scsi_print_result(cmd, "Done", disposition);
137 scsi_print_command(cmd);
138 if (scsi_status_is_check_condition(cmd->result))
139 scsi_print_sense(cmd);
140 if (level > 3)
141 scmd_printk(KERN_INFO, cmd,
142 "scsi host busy %d failed %d\n",
143 scsi_host_busy(cmd->device->host),
144 cmd->device->host->host_failed);
145 }
146 }
147}
148#endif
149
150/**
151 * scsi_finish_command - cleanup and pass command back to upper layer
152 * @cmd: the command
153 *
154 * Description: Pass command off to upper layer for finishing of I/O
155 * request, waking processes that are waiting on results,
156 * etc.
157 */
158void scsi_finish_command(struct scsi_cmnd *cmd)
159{
160 struct scsi_device *sdev = cmd->device;
161 struct scsi_target *starget = scsi_target(sdev);
162 struct Scsi_Host *shost = sdev->host;
163 struct scsi_driver *drv;
164 unsigned int good_bytes;
165
166 scsi_device_unbusy(sdev, cmd);
167
168 /*
169 * Clear the flags that say that the device/target/host is no longer
170 * capable of accepting new commands.
171 */
172 if (atomic_read(&shost->host_blocked))
173 atomic_set(&shost->host_blocked, 0);
174 if (atomic_read(&starget->target_blocked))
175 atomic_set(&starget->target_blocked, 0);
176 if (atomic_read(&sdev->device_blocked))
177 atomic_set(&sdev->device_blocked, 0);
178
179 SCSI_LOG_MLCOMPLETE(4, sdev_printk(KERN_INFO, sdev,
180 "Notifying upper driver of completion "
181 "(result %x)\n", cmd->result));
182
183 good_bytes = scsi_bufflen(cmd);
184 if (!blk_rq_is_passthrough(scsi_cmd_to_rq(cmd))) {
185 int old_good_bytes = good_bytes;
186 drv = scsi_cmd_to_driver(cmd);
187 if (drv->done)
188 good_bytes = drv->done(cmd);
189 /*
190 * USB may not give sense identifying bad sector and
191 * simply return a residue instead, so subtract off the
192 * residue if drv->done() error processing indicates no
193 * change to the completion length.
194 */
195 if (good_bytes == old_good_bytes)
196 good_bytes -= scsi_get_resid(cmd);
197 }
198 scsi_io_completion(cmd, good_bytes);
199}
200
201
202/*
203 * 4096 is big enough for saturating fast SCSI LUNs.
204 */
205int scsi_device_max_queue_depth(struct scsi_device *sdev)
206{
207 return min_t(int, sdev->host->can_queue, 4096);
208}
209
210/**
211 * scsi_change_queue_depth - change a device's queue depth
212 * @sdev: SCSI Device in question
213 * @depth: number of commands allowed to be queued to the driver
214 *
215 * Sets the device queue depth and returns the new value.
216 */
217int scsi_change_queue_depth(struct scsi_device *sdev, int depth)
218{
219 depth = min_t(int, depth, scsi_device_max_queue_depth(sdev));
220
221 if (depth > 0) {
222 sdev->queue_depth = depth;
223 wmb();
224 }
225
226 if (sdev->request_queue)
227 blk_set_queue_depth(sdev->request_queue, depth);
228
229 sbitmap_resize(&sdev->budget_map, sdev->queue_depth);
230
231 return sdev->queue_depth;
232}
233EXPORT_SYMBOL(scsi_change_queue_depth);
234
235/**
236 * scsi_track_queue_full - track QUEUE_FULL events to adjust queue depth
237 * @sdev: SCSI Device in question
238 * @depth: Current number of outstanding SCSI commands on this device,
239 * not counting the one returned as QUEUE_FULL.
240 *
241 * Description: This function will track successive QUEUE_FULL events on a
242 * specific SCSI device to determine if and when there is a
243 * need to adjust the queue depth on the device.
244 *
245 * Returns: 0 - No change needed, >0 - Adjust queue depth to this new depth,
246 * -1 - Drop back to untagged operation using host->cmd_per_lun
247 * as the untagged command depth
248 *
249 * Lock Status: None held on entry
250 *
251 * Notes: Low level drivers may call this at any time and we will do
252 * "The Right Thing." We are interrupt context safe.
253 */
254int scsi_track_queue_full(struct scsi_device *sdev, int depth)
255{
256
257 /*
258 * Don't let QUEUE_FULLs on the same
259 * jiffies count, they could all be from
260 * same event.
261 */
262 if ((jiffies >> 4) == (sdev->last_queue_full_time >> 4))
263 return 0;
264
265 sdev->last_queue_full_time = jiffies;
266 if (sdev->last_queue_full_depth != depth) {
267 sdev->last_queue_full_count = 1;
268 sdev->last_queue_full_depth = depth;
269 } else {
270 sdev->last_queue_full_count++;
271 }
272
273 if (sdev->last_queue_full_count <= 10)
274 return 0;
275
276 return scsi_change_queue_depth(sdev, depth);
277}
278EXPORT_SYMBOL(scsi_track_queue_full);
279
280/**
281 * scsi_vpd_inquiry - Request a device provide us with a VPD page
282 * @sdev: The device to ask
283 * @buffer: Where to put the result
284 * @page: Which Vital Product Data to return
285 * @len: The length of the buffer
286 *
287 * This is an internal helper function. You probably want to use
288 * scsi_get_vpd_page instead.
289 *
290 * Returns size of the vpd page on success or a negative error number.
291 */
292static int scsi_vpd_inquiry(struct scsi_device *sdev, unsigned char *buffer,
293 u8 page, unsigned len)
294{
295 int result;
296 unsigned char cmd[16];
297
298 if (len < 4)
299 return -EINVAL;
300
301 cmd[0] = INQUIRY;
302 cmd[1] = 1; /* EVPD */
303 cmd[2] = page;
304 cmd[3] = len >> 8;
305 cmd[4] = len & 0xff;
306 cmd[5] = 0; /* Control byte */
307
308 /*
309 * I'm not convinced we need to try quite this hard to get VPD, but
310 * all the existing users tried this hard.
311 */
312 result = scsi_execute_cmd(sdev, cmd, REQ_OP_DRV_IN, buffer, len,
313 30 * HZ, 3, NULL);
314 if (result)
315 return -EIO;
316
317 /*
318 * Sanity check that we got the page back that we asked for and that
319 * the page size is not 0.
320 */
321 if (buffer[1] != page)
322 return -EIO;
323
324 result = get_unaligned_be16(&buffer[2]);
325 if (!result)
326 return -EIO;
327
328 return result + 4;
329}
330
331enum scsi_vpd_parameters {
332 SCSI_VPD_HEADER_SIZE = 4,
333 SCSI_VPD_LIST_SIZE = 36,
334};
335
336static int scsi_get_vpd_size(struct scsi_device *sdev, u8 page)
337{
338 unsigned char vpd[SCSI_VPD_LIST_SIZE] __aligned(4);
339 int result;
340
341 if (sdev->no_vpd_size)
342 return SCSI_DEFAULT_VPD_LEN;
343
344 /*
345 * Fetch the supported pages VPD and validate that the requested page
346 * number is present.
347 */
348 if (page != 0) {
349 result = scsi_vpd_inquiry(sdev, vpd, 0, sizeof(vpd));
350 if (result < SCSI_VPD_HEADER_SIZE)
351 return 0;
352
353 result -= SCSI_VPD_HEADER_SIZE;
354 if (!memchr(&vpd[SCSI_VPD_HEADER_SIZE], page, result))
355 return 0;
356 }
357 /*
358 * Fetch the VPD page header to find out how big the page
359 * is. This is done to prevent problems on legacy devices
360 * which can not handle allocation lengths as large as
361 * potentially requested by the caller.
362 */
363 result = scsi_vpd_inquiry(sdev, vpd, page, SCSI_VPD_HEADER_SIZE);
364 if (result < 0)
365 return 0;
366
367 if (result < SCSI_VPD_HEADER_SIZE) {
368 dev_warn_once(&sdev->sdev_gendev,
369 "%s: short VPD page 0x%02x length: %d bytes\n",
370 __func__, page, result);
371 return 0;
372 }
373
374 return result;
375}
376
377/**
378 * scsi_get_vpd_page - Get Vital Product Data from a SCSI device
379 * @sdev: The device to ask
380 * @page: Which Vital Product Data to return
381 * @buf: where to store the VPD
382 * @buf_len: number of bytes in the VPD buffer area
383 *
384 * SCSI devices may optionally supply Vital Product Data. Each 'page'
385 * of VPD is defined in the appropriate SCSI document (eg SPC, SBC).
386 * If the device supports this VPD page, this routine fills @buf
387 * with the data from that page and return 0. If the VPD page is not
388 * supported or its content cannot be retrieved, -EINVAL is returned.
389 */
390int scsi_get_vpd_page(struct scsi_device *sdev, u8 page, unsigned char *buf,
391 int buf_len)
392{
393 int result, vpd_len;
394
395 if (!scsi_device_supports_vpd(sdev))
396 return -EINVAL;
397
398 vpd_len = scsi_get_vpd_size(sdev, page);
399 if (vpd_len <= 0)
400 return -EINVAL;
401
402 vpd_len = min(vpd_len, buf_len);
403
404 /*
405 * Fetch the actual page. Since the appropriate size was reported
406 * by the device it is now safe to ask for something bigger.
407 */
408 memset(buf, 0, buf_len);
409 result = scsi_vpd_inquiry(sdev, buf, page, vpd_len);
410 if (result < 0)
411 return -EINVAL;
412 else if (result > vpd_len)
413 dev_warn_once(&sdev->sdev_gendev,
414 "%s: VPD page 0x%02x result %d > %d bytes\n",
415 __func__, page, result, vpd_len);
416
417 return 0;
418}
419EXPORT_SYMBOL_GPL(scsi_get_vpd_page);
420
421/**
422 * scsi_get_vpd_buf - Get Vital Product Data from a SCSI device
423 * @sdev: The device to ask
424 * @page: Which Vital Product Data to return
425 *
426 * Returns %NULL upon failure.
427 */
428static struct scsi_vpd *scsi_get_vpd_buf(struct scsi_device *sdev, u8 page)
429{
430 struct scsi_vpd *vpd_buf;
431 int vpd_len, result;
432
433 vpd_len = scsi_get_vpd_size(sdev, page);
434 if (vpd_len <= 0)
435 return NULL;
436
437retry_pg:
438 /*
439 * Fetch the actual page. Since the appropriate size was reported
440 * by the device it is now safe to ask for something bigger.
441 */
442 vpd_buf = kmalloc(sizeof(*vpd_buf) + vpd_len, GFP_KERNEL);
443 if (!vpd_buf)
444 return NULL;
445
446 result = scsi_vpd_inquiry(sdev, vpd_buf->data, page, vpd_len);
447 if (result < 0) {
448 kfree(vpd_buf);
449 return NULL;
450 }
451 if (result > vpd_len) {
452 dev_warn_once(&sdev->sdev_gendev,
453 "%s: VPD page 0x%02x result %d > %d bytes\n",
454 __func__, page, result, vpd_len);
455 vpd_len = result;
456 kfree(vpd_buf);
457 goto retry_pg;
458 }
459
460 vpd_buf->len = result;
461
462 return vpd_buf;
463}
464
465static void scsi_update_vpd_page(struct scsi_device *sdev, u8 page,
466 struct scsi_vpd __rcu **sdev_vpd_buf)
467{
468 struct scsi_vpd *vpd_buf;
469
470 vpd_buf = scsi_get_vpd_buf(sdev, page);
471 if (!vpd_buf)
472 return;
473
474 mutex_lock(&sdev->inquiry_mutex);
475 vpd_buf = rcu_replace_pointer(*sdev_vpd_buf, vpd_buf,
476 lockdep_is_held(&sdev->inquiry_mutex));
477 mutex_unlock(&sdev->inquiry_mutex);
478
479 if (vpd_buf)
480 kfree_rcu(vpd_buf, rcu);
481}
482
483/**
484 * scsi_attach_vpd - Attach Vital Product Data to a SCSI device structure
485 * @sdev: The device to ask
486 *
487 * Attach the 'Device Identification' VPD page (0x83) and the
488 * 'Unit Serial Number' VPD page (0x80) to a SCSI device
489 * structure. This information can be used to identify the device
490 * uniquely.
491 */
492void scsi_attach_vpd(struct scsi_device *sdev)
493{
494 int i;
495 struct scsi_vpd *vpd_buf;
496
497 if (!scsi_device_supports_vpd(sdev))
498 return;
499
500 /* Ask for all the pages supported by this device */
501 vpd_buf = scsi_get_vpd_buf(sdev, 0);
502 if (!vpd_buf)
503 return;
504
505 for (i = 4; i < vpd_buf->len; i++) {
506 if (vpd_buf->data[i] == 0x0)
507 scsi_update_vpd_page(sdev, 0x0, &sdev->vpd_pg0);
508 if (vpd_buf->data[i] == 0x80)
509 scsi_update_vpd_page(sdev, 0x80, &sdev->vpd_pg80);
510 if (vpd_buf->data[i] == 0x83)
511 scsi_update_vpd_page(sdev, 0x83, &sdev->vpd_pg83);
512 if (vpd_buf->data[i] == 0x89)
513 scsi_update_vpd_page(sdev, 0x89, &sdev->vpd_pg89);
514 if (vpd_buf->data[i] == 0xb0)
515 scsi_update_vpd_page(sdev, 0xb0, &sdev->vpd_pgb0);
516 if (vpd_buf->data[i] == 0xb1)
517 scsi_update_vpd_page(sdev, 0xb1, &sdev->vpd_pgb1);
518 if (vpd_buf->data[i] == 0xb2)
519 scsi_update_vpd_page(sdev, 0xb2, &sdev->vpd_pgb2);
520 }
521 kfree(vpd_buf);
522}
523
524/**
525 * scsi_report_opcode - Find out if a given command is supported
526 * @sdev: scsi device to query
527 * @buffer: scratch buffer (must be at least 20 bytes long)
528 * @len: length of buffer
529 * @opcode: opcode for the command to look up
530 * @sa: service action for the command to look up
531 *
532 * Uses the REPORT SUPPORTED OPERATION CODES to check support for the
533 * command identified with @opcode and @sa. If the command does not
534 * have a service action, @sa must be 0. Returns -EINVAL if RSOC fails,
535 * 0 if the command is not supported and 1 if the device claims to
536 * support the command.
537 */
538int scsi_report_opcode(struct scsi_device *sdev, unsigned char *buffer,
539 unsigned int len, unsigned char opcode,
540 unsigned short sa)
541{
542 unsigned char cmd[16];
543 struct scsi_sense_hdr sshdr;
544 int result, request_len;
545 const struct scsi_exec_args exec_args = {
546 .sshdr = &sshdr,
547 };
548
549 if (sdev->no_report_opcodes || sdev->scsi_level < SCSI_SPC_3)
550 return -EINVAL;
551
552 /* RSOC header + size of command we are asking about */
553 request_len = 4 + COMMAND_SIZE(opcode);
554 if (request_len > len) {
555 dev_warn_once(&sdev->sdev_gendev,
556 "%s: len %u bytes, opcode 0x%02x needs %u\n",
557 __func__, len, opcode, request_len);
558 return -EINVAL;
559 }
560
561 memset(cmd, 0, 16);
562 cmd[0] = MAINTENANCE_IN;
563 cmd[1] = MI_REPORT_SUPPORTED_OPERATION_CODES;
564 if (!sa) {
565 cmd[2] = 1; /* One command format */
566 cmd[3] = opcode;
567 } else {
568 cmd[2] = 3; /* One command format with service action */
569 cmd[3] = opcode;
570 put_unaligned_be16(sa, &cmd[4]);
571 }
572 put_unaligned_be32(request_len, &cmd[6]);
573 memset(buffer, 0, len);
574
575 result = scsi_execute_cmd(sdev, cmd, REQ_OP_DRV_IN, buffer,
576 request_len, 30 * HZ, 3, &exec_args);
577 if (result < 0)
578 return result;
579 if (result && scsi_sense_valid(&sshdr) &&
580 sshdr.sense_key == ILLEGAL_REQUEST &&
581 (sshdr.asc == 0x20 || sshdr.asc == 0x24) && sshdr.ascq == 0x00)
582 return -EINVAL;
583
584 if ((buffer[1] & 3) == 3) /* Command supported */
585 return 1;
586
587 return 0;
588}
589EXPORT_SYMBOL(scsi_report_opcode);
590
591#define SCSI_CDL_CHECK_BUF_LEN 64
592
593static bool scsi_cdl_check_cmd(struct scsi_device *sdev, u8 opcode, u16 sa,
594 unsigned char *buf)
595{
596 int ret;
597 u8 cdlp;
598
599 /* Check operation code */
600 ret = scsi_report_opcode(sdev, buf, SCSI_CDL_CHECK_BUF_LEN, opcode, sa);
601 if (ret <= 0)
602 return false;
603
604 if ((buf[1] & 0x03) != 0x03)
605 return false;
606
607 /*
608 * See SPC-6, One_command parameter data format for
609 * REPORT SUPPORTED OPERATION CODES. We have the following cases
610 * depending on rwcdlp (buf[0] & 0x01) value:
611 * - rwcdlp == 0: then cdlp indicates support for the A mode page when
612 * it is equal to 1 and for the B mode page when it is
613 * equal to 2.
614 * - rwcdlp == 1: then cdlp indicates support for the T2A mode page
615 * when it is equal to 1 and for the T2B mode page when
616 * it is equal to 2.
617 * Overall, to detect support for command duration limits, we only need
618 * to check that cdlp is 1 or 2.
619 */
620 cdlp = (buf[1] & 0x18) >> 3;
621
622 return cdlp == 0x01 || cdlp == 0x02;
623}
624
625/**
626 * scsi_cdl_check - Check if a SCSI device supports Command Duration Limits
627 * @sdev: The device to check
628 */
629void scsi_cdl_check(struct scsi_device *sdev)
630{
631 bool cdl_supported;
632 unsigned char *buf;
633
634 /*
635 * Support for CDL was defined in SPC-5. Ignore devices reporting an
636 * lower SPC version. This also avoids problems with old drives choking
637 * on MAINTENANCE_IN / MI_REPORT_SUPPORTED_OPERATION_CODES with a
638 * service action specified, as done in scsi_cdl_check_cmd().
639 */
640 if (sdev->scsi_level < SCSI_SPC_5) {
641 sdev->cdl_supported = 0;
642 return;
643 }
644
645 buf = kmalloc(SCSI_CDL_CHECK_BUF_LEN, GFP_KERNEL);
646 if (!buf) {
647 sdev->cdl_supported = 0;
648 return;
649 }
650
651 /* Check support for READ_16, WRITE_16, READ_32 and WRITE_32 commands */
652 cdl_supported =
653 scsi_cdl_check_cmd(sdev, READ_16, 0, buf) ||
654 scsi_cdl_check_cmd(sdev, WRITE_16, 0, buf) ||
655 scsi_cdl_check_cmd(sdev, VARIABLE_LENGTH_CMD, READ_32, buf) ||
656 scsi_cdl_check_cmd(sdev, VARIABLE_LENGTH_CMD, WRITE_32, buf);
657 if (cdl_supported) {
658 /*
659 * We have CDL support: force the use of READ16/WRITE16.
660 * READ32 and WRITE32 will be used for devices that support
661 * the T10_PI_TYPE2_PROTECTION protection type.
662 */
663 sdev->use_16_for_rw = 1;
664 sdev->use_10_for_rw = 0;
665
666 sdev->cdl_supported = 1;
667 } else {
668 sdev->cdl_supported = 0;
669 }
670
671 kfree(buf);
672}
673
674/**
675 * scsi_cdl_enable - Enable or disable a SCSI device supports for Command
676 * Duration Limits
677 * @sdev: The target device
678 * @enable: the target state
679 */
680int scsi_cdl_enable(struct scsi_device *sdev, bool enable)
681{
682 struct scsi_mode_data data;
683 struct scsi_sense_hdr sshdr;
684 struct scsi_vpd *vpd;
685 bool is_ata = false;
686 char buf[64];
687 int ret;
688
689 if (!sdev->cdl_supported)
690 return -EOPNOTSUPP;
691
692 rcu_read_lock();
693 vpd = rcu_dereference(sdev->vpd_pg89);
694 if (vpd)
695 is_ata = true;
696 rcu_read_unlock();
697
698 /*
699 * For ATA devices, CDL needs to be enabled with a SET FEATURES command.
700 */
701 if (is_ata) {
702 char *buf_data;
703 int len;
704
705 ret = scsi_mode_sense(sdev, 0x08, 0x0a, 0xf2, buf, sizeof(buf),
706 5 * HZ, 3, &data, NULL);
707 if (ret)
708 return -EINVAL;
709
710 /* Enable CDL using the ATA feature page */
711 len = min_t(size_t, sizeof(buf),
712 data.length - data.header_length -
713 data.block_descriptor_length);
714 buf_data = buf + data.header_length +
715 data.block_descriptor_length;
716 if (enable)
717 buf_data[4] = 0x02;
718 else
719 buf_data[4] = 0;
720
721 ret = scsi_mode_select(sdev, 1, 0, buf_data, len, 5 * HZ, 3,
722 &data, &sshdr);
723 if (ret) {
724 if (ret > 0 && scsi_sense_valid(&sshdr))
725 scsi_print_sense_hdr(sdev,
726 dev_name(&sdev->sdev_gendev), &sshdr);
727 return ret;
728 }
729 }
730
731 sdev->cdl_enable = enable;
732
733 return 0;
734}
735
736/**
737 * scsi_device_get - get an additional reference to a scsi_device
738 * @sdev: device to get a reference to
739 *
740 * Description: Gets a reference to the scsi_device and increments the use count
741 * of the underlying LLDD module. You must hold host_lock of the
742 * parent Scsi_Host or already have a reference when calling this.
743 *
744 * This will fail if a device is deleted or cancelled, or when the LLD module
745 * is in the process of being unloaded.
746 */
747int scsi_device_get(struct scsi_device *sdev)
748{
749 if (sdev->sdev_state == SDEV_DEL || sdev->sdev_state == SDEV_CANCEL)
750 goto fail;
751 if (!try_module_get(sdev->host->hostt->module))
752 goto fail;
753 if (!get_device(&sdev->sdev_gendev))
754 goto fail_put_module;
755 return 0;
756
757fail_put_module:
758 module_put(sdev->host->hostt->module);
759fail:
760 return -ENXIO;
761}
762EXPORT_SYMBOL(scsi_device_get);
763
764/**
765 * scsi_device_put - release a reference to a scsi_device
766 * @sdev: device to release a reference on.
767 *
768 * Description: Release a reference to the scsi_device and decrements the use
769 * count of the underlying LLDD module. The device is freed once the last
770 * user vanishes.
771 */
772void scsi_device_put(struct scsi_device *sdev)
773{
774 struct module *mod = sdev->host->hostt->module;
775
776 put_device(&sdev->sdev_gendev);
777 module_put(mod);
778}
779EXPORT_SYMBOL(scsi_device_put);
780
781/* helper for shost_for_each_device, see that for documentation */
782struct scsi_device *__scsi_iterate_devices(struct Scsi_Host *shost,
783 struct scsi_device *prev)
784{
785 struct list_head *list = (prev ? &prev->siblings : &shost->__devices);
786 struct scsi_device *next = NULL;
787 unsigned long flags;
788
789 spin_lock_irqsave(shost->host_lock, flags);
790 while (list->next != &shost->__devices) {
791 next = list_entry(list->next, struct scsi_device, siblings);
792 /* skip devices that we can't get a reference to */
793 if (!scsi_device_get(next))
794 break;
795 next = NULL;
796 list = list->next;
797 }
798 spin_unlock_irqrestore(shost->host_lock, flags);
799
800 if (prev)
801 scsi_device_put(prev);
802 return next;
803}
804EXPORT_SYMBOL(__scsi_iterate_devices);
805
806/**
807 * starget_for_each_device - helper to walk all devices of a target
808 * @starget: target whose devices we want to iterate over.
809 * @data: Opaque passed to each function call.
810 * @fn: Function to call on each device
811 *
812 * This traverses over each device of @starget. The devices have
813 * a reference that must be released by scsi_host_put when breaking
814 * out of the loop.
815 */
816void starget_for_each_device(struct scsi_target *starget, void *data,
817 void (*fn)(struct scsi_device *, void *))
818{
819 struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
820 struct scsi_device *sdev;
821
822 shost_for_each_device(sdev, shost) {
823 if ((sdev->channel == starget->channel) &&
824 (sdev->id == starget->id))
825 fn(sdev, data);
826 }
827}
828EXPORT_SYMBOL(starget_for_each_device);
829
830/**
831 * __starget_for_each_device - helper to walk all devices of a target (UNLOCKED)
832 * @starget: target whose devices we want to iterate over.
833 * @data: parameter for callback @fn()
834 * @fn: callback function that is invoked for each device
835 *
836 * This traverses over each device of @starget. It does _not_
837 * take a reference on the scsi_device, so the whole loop must be
838 * protected by shost->host_lock.
839 *
840 * Note: The only reason why drivers would want to use this is because
841 * they need to access the device list in irq context. Otherwise you
842 * really want to use starget_for_each_device instead.
843 **/
844void __starget_for_each_device(struct scsi_target *starget, void *data,
845 void (*fn)(struct scsi_device *, void *))
846{
847 struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
848 struct scsi_device *sdev;
849
850 __shost_for_each_device(sdev, shost) {
851 if ((sdev->channel == starget->channel) &&
852 (sdev->id == starget->id))
853 fn(sdev, data);
854 }
855}
856EXPORT_SYMBOL(__starget_for_each_device);
857
858/**
859 * __scsi_device_lookup_by_target - find a device given the target (UNLOCKED)
860 * @starget: SCSI target pointer
861 * @lun: SCSI Logical Unit Number
862 *
863 * Description: Looks up the scsi_device with the specified @lun for a given
864 * @starget. The returned scsi_device does not have an additional
865 * reference. You must hold the host's host_lock over this call and
866 * any access to the returned scsi_device. A scsi_device in state
867 * SDEV_DEL is skipped.
868 *
869 * Note: The only reason why drivers should use this is because
870 * they need to access the device list in irq context. Otherwise you
871 * really want to use scsi_device_lookup_by_target instead.
872 **/
873struct scsi_device *__scsi_device_lookup_by_target(struct scsi_target *starget,
874 u64 lun)
875{
876 struct scsi_device *sdev;
877
878 list_for_each_entry(sdev, &starget->devices, same_target_siblings) {
879 if (sdev->sdev_state == SDEV_DEL)
880 continue;
881 if (sdev->lun ==lun)
882 return sdev;
883 }
884
885 return NULL;
886}
887EXPORT_SYMBOL(__scsi_device_lookup_by_target);
888
889/**
890 * scsi_device_lookup_by_target - find a device given the target
891 * @starget: SCSI target pointer
892 * @lun: SCSI Logical Unit Number
893 *
894 * Description: Looks up the scsi_device with the specified @lun for a given
895 * @starget. The returned scsi_device has an additional reference that
896 * needs to be released with scsi_device_put once you're done with it.
897 **/
898struct scsi_device *scsi_device_lookup_by_target(struct scsi_target *starget,
899 u64 lun)
900{
901 struct scsi_device *sdev;
902 struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
903 unsigned long flags;
904
905 spin_lock_irqsave(shost->host_lock, flags);
906 sdev = __scsi_device_lookup_by_target(starget, lun);
907 if (sdev && scsi_device_get(sdev))
908 sdev = NULL;
909 spin_unlock_irqrestore(shost->host_lock, flags);
910
911 return sdev;
912}
913EXPORT_SYMBOL(scsi_device_lookup_by_target);
914
915/**
916 * __scsi_device_lookup - find a device given the host (UNLOCKED)
917 * @shost: SCSI host pointer
918 * @channel: SCSI channel (zero if only one channel)
919 * @id: SCSI target number (physical unit number)
920 * @lun: SCSI Logical Unit Number
921 *
922 * Description: Looks up the scsi_device with the specified @channel, @id, @lun
923 * for a given host. The returned scsi_device does not have an additional
924 * reference. You must hold the host's host_lock over this call and any access
925 * to the returned scsi_device.
926 *
927 * Note: The only reason why drivers would want to use this is because
928 * they need to access the device list in irq context. Otherwise you
929 * really want to use scsi_device_lookup instead.
930 **/
931struct scsi_device *__scsi_device_lookup(struct Scsi_Host *shost,
932 uint channel, uint id, u64 lun)
933{
934 struct scsi_device *sdev;
935
936 list_for_each_entry(sdev, &shost->__devices, siblings) {
937 if (sdev->sdev_state == SDEV_DEL)
938 continue;
939 if (sdev->channel == channel && sdev->id == id &&
940 sdev->lun ==lun)
941 return sdev;
942 }
943
944 return NULL;
945}
946EXPORT_SYMBOL(__scsi_device_lookup);
947
948/**
949 * scsi_device_lookup - find a device given the host
950 * @shost: SCSI host pointer
951 * @channel: SCSI channel (zero if only one channel)
952 * @id: SCSI target number (physical unit number)
953 * @lun: SCSI Logical Unit Number
954 *
955 * Description: Looks up the scsi_device with the specified @channel, @id, @lun
956 * for a given host. The returned scsi_device has an additional reference that
957 * needs to be released with scsi_device_put once you're done with it.
958 **/
959struct scsi_device *scsi_device_lookup(struct Scsi_Host *shost,
960 uint channel, uint id, u64 lun)
961{
962 struct scsi_device *sdev;
963 unsigned long flags;
964
965 spin_lock_irqsave(shost->host_lock, flags);
966 sdev = __scsi_device_lookup(shost, channel, id, lun);
967 if (sdev && scsi_device_get(sdev))
968 sdev = NULL;
969 spin_unlock_irqrestore(shost->host_lock, flags);
970
971 return sdev;
972}
973EXPORT_SYMBOL(scsi_device_lookup);
974
975MODULE_DESCRIPTION("SCSI core");
976MODULE_LICENSE("GPL");
977
978module_param(scsi_logging_level, int, S_IRUGO|S_IWUSR);
979MODULE_PARM_DESC(scsi_logging_level, "a bit mask of logging levels");
980
981static int __init init_scsi(void)
982{
983 int error;
984
985 error = scsi_init_procfs();
986 if (error)
987 goto cleanup_queue;
988 error = scsi_init_devinfo();
989 if (error)
990 goto cleanup_procfs;
991 error = scsi_init_hosts();
992 if (error)
993 goto cleanup_devlist;
994 error = scsi_init_sysctl();
995 if (error)
996 goto cleanup_hosts;
997 error = scsi_sysfs_register();
998 if (error)
999 goto cleanup_sysctl;
1000
1001 scsi_netlink_init();
1002
1003 printk(KERN_NOTICE "SCSI subsystem initialized\n");
1004 return 0;
1005
1006cleanup_sysctl:
1007 scsi_exit_sysctl();
1008cleanup_hosts:
1009 scsi_exit_hosts();
1010cleanup_devlist:
1011 scsi_exit_devinfo();
1012cleanup_procfs:
1013 scsi_exit_procfs();
1014cleanup_queue:
1015 scsi_exit_queue();
1016 printk(KERN_ERR "SCSI subsystem failed to initialize, error = %d\n",
1017 -error);
1018 return error;
1019}
1020
1021static void __exit exit_scsi(void)
1022{
1023 scsi_netlink_exit();
1024 scsi_sysfs_unregister();
1025 scsi_exit_sysctl();
1026 scsi_exit_hosts();
1027 scsi_exit_devinfo();
1028 scsi_exit_procfs();
1029 scsi_exit_queue();
1030}
1031
1032subsys_initcall(init_scsi);
1033module_exit(exit_scsi);
1/*
2 * scsi.c Copyright (C) 1992 Drew Eckhardt
3 * Copyright (C) 1993, 1994, 1995, 1999 Eric Youngdale
4 * Copyright (C) 2002, 2003 Christoph Hellwig
5 *
6 * generic mid-level SCSI driver
7 * Initial versions: Drew Eckhardt
8 * Subsequent revisions: Eric Youngdale
9 *
10 * <drew@colorado.edu>
11 *
12 * Bug correction thanks go to :
13 * Rik Faith <faith@cs.unc.edu>
14 * Tommy Thorn <tthorn>
15 * Thomas Wuensche <tw@fgb1.fgb.mw.tu-muenchen.de>
16 *
17 * Modified by Eric Youngdale eric@andante.org or ericy@gnu.ai.mit.edu to
18 * add scatter-gather, multiple outstanding request, and other
19 * enhancements.
20 *
21 * Native multichannel, wide scsi, /proc/scsi and hot plugging
22 * support added by Michael Neuffer <mike@i-connect.net>
23 *
24 * Added request_module("scsi_hostadapter") for kerneld:
25 * (Put an "alias scsi_hostadapter your_hostadapter" in /etc/modprobe.conf)
26 * Bjorn Ekwall <bj0rn@blox.se>
27 * (changed to kmod)
28 *
29 * Major improvements to the timeout, abort, and reset processing,
30 * as well as performance modifications for large queue depths by
31 * Leonard N. Zubkoff <lnz@dandelion.com>
32 *
33 * Converted cli() code to spinlocks, Ingo Molnar
34 *
35 * Jiffies wrap fixes (host->resetting), 3 Dec 1998 Andrea Arcangeli
36 *
37 * out_of_space hacks, D. Gilbert (dpg) 990608
38 */
39
40#include <linux/module.h>
41#include <linux/moduleparam.h>
42#include <linux/kernel.h>
43#include <linux/timer.h>
44#include <linux/string.h>
45#include <linux/slab.h>
46#include <linux/blkdev.h>
47#include <linux/delay.h>
48#include <linux/init.h>
49#include <linux/completion.h>
50#include <linux/unistd.h>
51#include <linux/spinlock.h>
52#include <linux/kmod.h>
53#include <linux/interrupt.h>
54#include <linux/notifier.h>
55#include <linux/cpu.h>
56#include <linux/mutex.h>
57#include <linux/async.h>
58#include <asm/unaligned.h>
59
60#include <scsi/scsi.h>
61#include <scsi/scsi_cmnd.h>
62#include <scsi/scsi_dbg.h>
63#include <scsi/scsi_device.h>
64#include <scsi/scsi_driver.h>
65#include <scsi/scsi_eh.h>
66#include <scsi/scsi_host.h>
67#include <scsi/scsi_tcq.h>
68
69#include "scsi_priv.h"
70#include "scsi_logging.h"
71
72#define CREATE_TRACE_POINTS
73#include <trace/events/scsi.h>
74
75/*
76 * Definitions and constants.
77 */
78
79/*
80 * Note - the initial logging level can be set here to log events at boot time.
81 * After the system is up, you may enable logging via the /proc interface.
82 */
83unsigned int scsi_logging_level;
84#if defined(CONFIG_SCSI_LOGGING)
85EXPORT_SYMBOL(scsi_logging_level);
86#endif
87
88/* sd, scsi core and power management need to coordinate flushing async actions */
89ASYNC_DOMAIN(scsi_sd_probe_domain);
90EXPORT_SYMBOL(scsi_sd_probe_domain);
91
92/*
93 * Separate domain (from scsi_sd_probe_domain) to maximize the benefit of
94 * asynchronous system resume operations. It is marked 'exclusive' to avoid
95 * being included in the async_synchronize_full() that is invoked by
96 * dpm_resume()
97 */
98ASYNC_DOMAIN_EXCLUSIVE(scsi_sd_pm_domain);
99EXPORT_SYMBOL(scsi_sd_pm_domain);
100
101struct scsi_host_cmd_pool {
102 struct kmem_cache *cmd_slab;
103 struct kmem_cache *sense_slab;
104 unsigned int users;
105 char *cmd_name;
106 char *sense_name;
107 unsigned int slab_flags;
108 gfp_t gfp_mask;
109};
110
111static struct scsi_host_cmd_pool scsi_cmd_pool = {
112 .cmd_name = "scsi_cmd_cache",
113 .sense_name = "scsi_sense_cache",
114 .slab_flags = SLAB_HWCACHE_ALIGN,
115};
116
117static struct scsi_host_cmd_pool scsi_cmd_dma_pool = {
118 .cmd_name = "scsi_cmd_cache(DMA)",
119 .sense_name = "scsi_sense_cache(DMA)",
120 .slab_flags = SLAB_HWCACHE_ALIGN|SLAB_CACHE_DMA,
121 .gfp_mask = __GFP_DMA,
122};
123
124static DEFINE_MUTEX(host_cmd_pool_mutex);
125
126/**
127 * scsi_host_free_command - internal function to release a command
128 * @shost: host to free the command for
129 * @cmd: command to release
130 *
131 * the command must previously have been allocated by
132 * scsi_host_alloc_command.
133 */
134static void
135scsi_host_free_command(struct Scsi_Host *shost, struct scsi_cmnd *cmd)
136{
137 struct scsi_host_cmd_pool *pool = shost->cmd_pool;
138
139 if (cmd->prot_sdb)
140 kmem_cache_free(scsi_sdb_cache, cmd->prot_sdb);
141 kmem_cache_free(pool->sense_slab, cmd->sense_buffer);
142 kmem_cache_free(pool->cmd_slab, cmd);
143}
144
145/**
146 * scsi_host_alloc_command - internal function to allocate command
147 * @shost: SCSI host whose pool to allocate from
148 * @gfp_mask: mask for the allocation
149 *
150 * Returns a fully allocated command with sense buffer and protection
151 * data buffer (where applicable) or NULL on failure
152 */
153static struct scsi_cmnd *
154scsi_host_alloc_command(struct Scsi_Host *shost, gfp_t gfp_mask)
155{
156 struct scsi_host_cmd_pool *pool = shost->cmd_pool;
157 struct scsi_cmnd *cmd;
158
159 cmd = kmem_cache_zalloc(pool->cmd_slab, gfp_mask | pool->gfp_mask);
160 if (!cmd)
161 goto fail;
162
163 cmd->sense_buffer = kmem_cache_alloc(pool->sense_slab,
164 gfp_mask | pool->gfp_mask);
165 if (!cmd->sense_buffer)
166 goto fail_free_cmd;
167
168 if (scsi_host_get_prot(shost) >= SHOST_DIX_TYPE0_PROTECTION) {
169 cmd->prot_sdb = kmem_cache_zalloc(scsi_sdb_cache, gfp_mask);
170 if (!cmd->prot_sdb)
171 goto fail_free_sense;
172 }
173
174 return cmd;
175
176fail_free_sense:
177 kmem_cache_free(pool->sense_slab, cmd->sense_buffer);
178fail_free_cmd:
179 kmem_cache_free(pool->cmd_slab, cmd);
180fail:
181 return NULL;
182}
183
184/**
185 * __scsi_get_command - Allocate a struct scsi_cmnd
186 * @shost: host to transmit command
187 * @gfp_mask: allocation mask
188 *
189 * Description: allocate a struct scsi_cmd from host's slab, recycling from the
190 * host's free_list if necessary.
191 */
192static struct scsi_cmnd *
193__scsi_get_command(struct Scsi_Host *shost, gfp_t gfp_mask)
194{
195 struct scsi_cmnd *cmd = scsi_host_alloc_command(shost, gfp_mask);
196
197 if (unlikely(!cmd)) {
198 unsigned long flags;
199
200 spin_lock_irqsave(&shost->free_list_lock, flags);
201 if (likely(!list_empty(&shost->free_list))) {
202 cmd = list_entry(shost->free_list.next,
203 struct scsi_cmnd, list);
204 list_del_init(&cmd->list);
205 }
206 spin_unlock_irqrestore(&shost->free_list_lock, flags);
207
208 if (cmd) {
209 void *buf, *prot;
210
211 buf = cmd->sense_buffer;
212 prot = cmd->prot_sdb;
213
214 memset(cmd, 0, sizeof(*cmd));
215
216 cmd->sense_buffer = buf;
217 cmd->prot_sdb = prot;
218 }
219 }
220
221 return cmd;
222}
223
224/**
225 * scsi_get_command - Allocate and setup a scsi command block
226 * @dev: parent scsi device
227 * @gfp_mask: allocator flags
228 *
229 * Returns: The allocated scsi command structure.
230 */
231struct scsi_cmnd *scsi_get_command(struct scsi_device *dev, gfp_t gfp_mask)
232{
233 struct scsi_cmnd *cmd = __scsi_get_command(dev->host, gfp_mask);
234 unsigned long flags;
235
236 if (unlikely(cmd == NULL))
237 return NULL;
238
239 cmd->device = dev;
240 INIT_LIST_HEAD(&cmd->list);
241 INIT_DELAYED_WORK(&cmd->abort_work, scmd_eh_abort_handler);
242 spin_lock_irqsave(&dev->list_lock, flags);
243 list_add_tail(&cmd->list, &dev->cmd_list);
244 spin_unlock_irqrestore(&dev->list_lock, flags);
245 cmd->jiffies_at_alloc = jiffies;
246 return cmd;
247}
248
249/**
250 * __scsi_put_command - Free a struct scsi_cmnd
251 * @shost: dev->host
252 * @cmd: Command to free
253 */
254static void __scsi_put_command(struct Scsi_Host *shost, struct scsi_cmnd *cmd)
255{
256 unsigned long flags;
257
258 if (unlikely(list_empty(&shost->free_list))) {
259 spin_lock_irqsave(&shost->free_list_lock, flags);
260 if (list_empty(&shost->free_list)) {
261 list_add(&cmd->list, &shost->free_list);
262 cmd = NULL;
263 }
264 spin_unlock_irqrestore(&shost->free_list_lock, flags);
265 }
266
267 if (likely(cmd != NULL))
268 scsi_host_free_command(shost, cmd);
269}
270
271/**
272 * scsi_put_command - Free a scsi command block
273 * @cmd: command block to free
274 *
275 * Returns: Nothing.
276 *
277 * Notes: The command must not belong to any lists.
278 */
279void scsi_put_command(struct scsi_cmnd *cmd)
280{
281 unsigned long flags;
282
283 /* serious error if the command hasn't come from a device list */
284 spin_lock_irqsave(&cmd->device->list_lock, flags);
285 BUG_ON(list_empty(&cmd->list));
286 list_del_init(&cmd->list);
287 spin_unlock_irqrestore(&cmd->device->list_lock, flags);
288
289 BUG_ON(delayed_work_pending(&cmd->abort_work));
290
291 __scsi_put_command(cmd->device->host, cmd);
292}
293
294static struct scsi_host_cmd_pool *
295scsi_find_host_cmd_pool(struct Scsi_Host *shost)
296{
297 if (shost->hostt->cmd_size)
298 return shost->hostt->cmd_pool;
299 if (shost->unchecked_isa_dma)
300 return &scsi_cmd_dma_pool;
301 return &scsi_cmd_pool;
302}
303
304static void
305scsi_free_host_cmd_pool(struct scsi_host_cmd_pool *pool)
306{
307 kfree(pool->sense_name);
308 kfree(pool->cmd_name);
309 kfree(pool);
310}
311
312static struct scsi_host_cmd_pool *
313scsi_alloc_host_cmd_pool(struct Scsi_Host *shost)
314{
315 struct scsi_host_template *hostt = shost->hostt;
316 struct scsi_host_cmd_pool *pool;
317
318 pool = kzalloc(sizeof(*pool), GFP_KERNEL);
319 if (!pool)
320 return NULL;
321
322 pool->cmd_name = kasprintf(GFP_KERNEL, "%s_cmd", hostt->proc_name);
323 pool->sense_name = kasprintf(GFP_KERNEL, "%s_sense", hostt->proc_name);
324 if (!pool->cmd_name || !pool->sense_name) {
325 scsi_free_host_cmd_pool(pool);
326 return NULL;
327 }
328
329 pool->slab_flags = SLAB_HWCACHE_ALIGN;
330 if (shost->unchecked_isa_dma) {
331 pool->slab_flags |= SLAB_CACHE_DMA;
332 pool->gfp_mask = __GFP_DMA;
333 }
334
335 if (hostt->cmd_size)
336 hostt->cmd_pool = pool;
337
338 return pool;
339}
340
341static struct scsi_host_cmd_pool *
342scsi_get_host_cmd_pool(struct Scsi_Host *shost)
343{
344 struct scsi_host_template *hostt = shost->hostt;
345 struct scsi_host_cmd_pool *retval = NULL, *pool;
346 size_t cmd_size = sizeof(struct scsi_cmnd) + hostt->cmd_size;
347
348 /*
349 * Select a command slab for this host and create it if not
350 * yet existent.
351 */
352 mutex_lock(&host_cmd_pool_mutex);
353 pool = scsi_find_host_cmd_pool(shost);
354 if (!pool) {
355 pool = scsi_alloc_host_cmd_pool(shost);
356 if (!pool)
357 goto out;
358 }
359
360 if (!pool->users) {
361 pool->cmd_slab = kmem_cache_create(pool->cmd_name, cmd_size, 0,
362 pool->slab_flags, NULL);
363 if (!pool->cmd_slab)
364 goto out_free_pool;
365
366 pool->sense_slab = kmem_cache_create(pool->sense_name,
367 SCSI_SENSE_BUFFERSIZE, 0,
368 pool->slab_flags, NULL);
369 if (!pool->sense_slab)
370 goto out_free_slab;
371 }
372
373 pool->users++;
374 retval = pool;
375out:
376 mutex_unlock(&host_cmd_pool_mutex);
377 return retval;
378
379out_free_slab:
380 kmem_cache_destroy(pool->cmd_slab);
381out_free_pool:
382 if (hostt->cmd_size) {
383 scsi_free_host_cmd_pool(pool);
384 hostt->cmd_pool = NULL;
385 }
386 goto out;
387}
388
389static void scsi_put_host_cmd_pool(struct Scsi_Host *shost)
390{
391 struct scsi_host_template *hostt = shost->hostt;
392 struct scsi_host_cmd_pool *pool;
393
394 mutex_lock(&host_cmd_pool_mutex);
395 pool = scsi_find_host_cmd_pool(shost);
396
397 /*
398 * This may happen if a driver has a mismatched get and put
399 * of the command pool; the driver should be implicated in
400 * the stack trace
401 */
402 BUG_ON(pool->users == 0);
403
404 if (!--pool->users) {
405 kmem_cache_destroy(pool->cmd_slab);
406 kmem_cache_destroy(pool->sense_slab);
407 if (hostt->cmd_size) {
408 scsi_free_host_cmd_pool(pool);
409 hostt->cmd_pool = NULL;
410 }
411 }
412 mutex_unlock(&host_cmd_pool_mutex);
413}
414
415/**
416 * scsi_setup_command_freelist - Setup the command freelist for a scsi host.
417 * @shost: host to allocate the freelist for.
418 *
419 * Description: The command freelist protects against system-wide out of memory
420 * deadlock by preallocating one SCSI command structure for each host, so the
421 * system can always write to a swap file on a device associated with that host.
422 *
423 * Returns: Nothing.
424 */
425int scsi_setup_command_freelist(struct Scsi_Host *shost)
426{
427 const gfp_t gfp_mask = shost->unchecked_isa_dma ? GFP_DMA : GFP_KERNEL;
428 struct scsi_cmnd *cmd;
429
430 spin_lock_init(&shost->free_list_lock);
431 INIT_LIST_HEAD(&shost->free_list);
432
433 shost->cmd_pool = scsi_get_host_cmd_pool(shost);
434 if (!shost->cmd_pool)
435 return -ENOMEM;
436
437 /*
438 * Get one backup command for this host.
439 */
440 cmd = scsi_host_alloc_command(shost, gfp_mask);
441 if (!cmd) {
442 scsi_put_host_cmd_pool(shost);
443 shost->cmd_pool = NULL;
444 return -ENOMEM;
445 }
446 list_add(&cmd->list, &shost->free_list);
447 return 0;
448}
449
450/**
451 * scsi_destroy_command_freelist - Release the command freelist for a scsi host.
452 * @shost: host whose freelist is going to be destroyed
453 */
454void scsi_destroy_command_freelist(struct Scsi_Host *shost)
455{
456 /*
457 * If cmd_pool is NULL the free list was not initialized, so
458 * do not attempt to release resources.
459 */
460 if (!shost->cmd_pool)
461 return;
462
463 while (!list_empty(&shost->free_list)) {
464 struct scsi_cmnd *cmd;
465
466 cmd = list_entry(shost->free_list.next, struct scsi_cmnd, list);
467 list_del_init(&cmd->list);
468 scsi_host_free_command(shost, cmd);
469 }
470 shost->cmd_pool = NULL;
471 scsi_put_host_cmd_pool(shost);
472}
473
474#ifdef CONFIG_SCSI_LOGGING
475void scsi_log_send(struct scsi_cmnd *cmd)
476{
477 unsigned int level;
478
479 /*
480 * If ML QUEUE log level is greater than or equal to:
481 *
482 * 1: nothing (match completion)
483 *
484 * 2: log opcode + command of all commands + cmd address
485 *
486 * 3: same as 2
487 *
488 * 4: same as 3
489 */
490 if (unlikely(scsi_logging_level)) {
491 level = SCSI_LOG_LEVEL(SCSI_LOG_MLQUEUE_SHIFT,
492 SCSI_LOG_MLQUEUE_BITS);
493 if (level > 1) {
494 scmd_printk(KERN_INFO, cmd,
495 "Send: scmd 0x%p\n", cmd);
496 scsi_print_command(cmd);
497 }
498 }
499}
500
501void scsi_log_completion(struct scsi_cmnd *cmd, int disposition)
502{
503 unsigned int level;
504
505 /*
506 * If ML COMPLETE log level is greater than or equal to:
507 *
508 * 1: log disposition, result, opcode + command, and conditionally
509 * sense data for failures or non SUCCESS dispositions.
510 *
511 * 2: same as 1 but for all command completions.
512 *
513 * 3: same as 2
514 *
515 * 4: same as 3 plus dump extra junk
516 */
517 if (unlikely(scsi_logging_level)) {
518 level = SCSI_LOG_LEVEL(SCSI_LOG_MLCOMPLETE_SHIFT,
519 SCSI_LOG_MLCOMPLETE_BITS);
520 if (((level > 0) && (cmd->result || disposition != SUCCESS)) ||
521 (level > 1)) {
522 scsi_print_result(cmd, "Done", disposition);
523 scsi_print_command(cmd);
524 if (status_byte(cmd->result) & CHECK_CONDITION)
525 scsi_print_sense(cmd);
526 if (level > 3)
527 scmd_printk(KERN_INFO, cmd,
528 "scsi host busy %d failed %d\n",
529 atomic_read(&cmd->device->host->host_busy),
530 cmd->device->host->host_failed);
531 }
532 }
533}
534#endif
535
536/**
537 * scsi_cmd_get_serial - Assign a serial number to a command
538 * @host: the scsi host
539 * @cmd: command to assign serial number to
540 *
541 * Description: a serial number identifies a request for error recovery
542 * and debugging purposes. Protected by the Host_Lock of host.
543 */
544void scsi_cmd_get_serial(struct Scsi_Host *host, struct scsi_cmnd *cmd)
545{
546 cmd->serial_number = host->cmd_serial_number++;
547 if (cmd->serial_number == 0)
548 cmd->serial_number = host->cmd_serial_number++;
549}
550EXPORT_SYMBOL(scsi_cmd_get_serial);
551
552/**
553 * scsi_finish_command - cleanup and pass command back to upper layer
554 * @cmd: the command
555 *
556 * Description: Pass command off to upper layer for finishing of I/O
557 * request, waking processes that are waiting on results,
558 * etc.
559 */
560void scsi_finish_command(struct scsi_cmnd *cmd)
561{
562 struct scsi_device *sdev = cmd->device;
563 struct scsi_target *starget = scsi_target(sdev);
564 struct Scsi_Host *shost = sdev->host;
565 struct scsi_driver *drv;
566 unsigned int good_bytes;
567
568 scsi_device_unbusy(sdev);
569
570 /*
571 * Clear the flags that say that the device/target/host is no longer
572 * capable of accepting new commands.
573 */
574 if (atomic_read(&shost->host_blocked))
575 atomic_set(&shost->host_blocked, 0);
576 if (atomic_read(&starget->target_blocked))
577 atomic_set(&starget->target_blocked, 0);
578 if (atomic_read(&sdev->device_blocked))
579 atomic_set(&sdev->device_blocked, 0);
580
581 /*
582 * If we have valid sense information, then some kind of recovery
583 * must have taken place. Make a note of this.
584 */
585 if (SCSI_SENSE_VALID(cmd))
586 cmd->result |= (DRIVER_SENSE << 24);
587
588 SCSI_LOG_MLCOMPLETE(4, sdev_printk(KERN_INFO, sdev,
589 "Notifying upper driver of completion "
590 "(result %x)\n", cmd->result));
591
592 good_bytes = scsi_bufflen(cmd);
593 if (cmd->request->cmd_type != REQ_TYPE_BLOCK_PC) {
594 int old_good_bytes = good_bytes;
595 drv = scsi_cmd_to_driver(cmd);
596 if (drv->done)
597 good_bytes = drv->done(cmd);
598 /*
599 * USB may not give sense identifying bad sector and
600 * simply return a residue instead, so subtract off the
601 * residue if drv->done() error processing indicates no
602 * change to the completion length.
603 */
604 if (good_bytes == old_good_bytes)
605 good_bytes -= scsi_get_resid(cmd);
606 }
607 scsi_io_completion(cmd, good_bytes);
608}
609
610/**
611 * scsi_change_queue_depth - change a device's queue depth
612 * @sdev: SCSI Device in question
613 * @depth: number of commands allowed to be queued to the driver
614 *
615 * Sets the device queue depth and returns the new value.
616 */
617int scsi_change_queue_depth(struct scsi_device *sdev, int depth)
618{
619 if (depth > 0) {
620 sdev->queue_depth = depth;
621 wmb();
622 }
623
624 if (sdev->request_queue)
625 blk_set_queue_depth(sdev->request_queue, depth);
626
627 return sdev->queue_depth;
628}
629EXPORT_SYMBOL(scsi_change_queue_depth);
630
631/**
632 * scsi_track_queue_full - track QUEUE_FULL events to adjust queue depth
633 * @sdev: SCSI Device in question
634 * @depth: Current number of outstanding SCSI commands on this device,
635 * not counting the one returned as QUEUE_FULL.
636 *
637 * Description: This function will track successive QUEUE_FULL events on a
638 * specific SCSI device to determine if and when there is a
639 * need to adjust the queue depth on the device.
640 *
641 * Returns: 0 - No change needed, >0 - Adjust queue depth to this new depth,
642 * -1 - Drop back to untagged operation using host->cmd_per_lun
643 * as the untagged command depth
644 *
645 * Lock Status: None held on entry
646 *
647 * Notes: Low level drivers may call this at any time and we will do
648 * "The Right Thing." We are interrupt context safe.
649 */
650int scsi_track_queue_full(struct scsi_device *sdev, int depth)
651{
652
653 /*
654 * Don't let QUEUE_FULLs on the same
655 * jiffies count, they could all be from
656 * same event.
657 */
658 if ((jiffies >> 4) == (sdev->last_queue_full_time >> 4))
659 return 0;
660
661 sdev->last_queue_full_time = jiffies;
662 if (sdev->last_queue_full_depth != depth) {
663 sdev->last_queue_full_count = 1;
664 sdev->last_queue_full_depth = depth;
665 } else {
666 sdev->last_queue_full_count++;
667 }
668
669 if (sdev->last_queue_full_count <= 10)
670 return 0;
671
672 return scsi_change_queue_depth(sdev, depth);
673}
674EXPORT_SYMBOL(scsi_track_queue_full);
675
676/**
677 * scsi_vpd_inquiry - Request a device provide us with a VPD page
678 * @sdev: The device to ask
679 * @buffer: Where to put the result
680 * @page: Which Vital Product Data to return
681 * @len: The length of the buffer
682 *
683 * This is an internal helper function. You probably want to use
684 * scsi_get_vpd_page instead.
685 *
686 * Returns size of the vpd page on success or a negative error number.
687 */
688static int scsi_vpd_inquiry(struct scsi_device *sdev, unsigned char *buffer,
689 u8 page, unsigned len)
690{
691 int result;
692 unsigned char cmd[16];
693
694 if (len < 4)
695 return -EINVAL;
696
697 cmd[0] = INQUIRY;
698 cmd[1] = 1; /* EVPD */
699 cmd[2] = page;
700 cmd[3] = len >> 8;
701 cmd[4] = len & 0xff;
702 cmd[5] = 0; /* Control byte */
703
704 /*
705 * I'm not convinced we need to try quite this hard to get VPD, but
706 * all the existing users tried this hard.
707 */
708 result = scsi_execute_req(sdev, cmd, DMA_FROM_DEVICE, buffer,
709 len, NULL, 30 * HZ, 3, NULL);
710 if (result)
711 return -EIO;
712
713 /* Sanity check that we got the page back that we asked for */
714 if (buffer[1] != page)
715 return -EIO;
716
717 return get_unaligned_be16(&buffer[2]) + 4;
718}
719
720/**
721 * scsi_get_vpd_page - Get Vital Product Data from a SCSI device
722 * @sdev: The device to ask
723 * @page: Which Vital Product Data to return
724 * @buf: where to store the VPD
725 * @buf_len: number of bytes in the VPD buffer area
726 *
727 * SCSI devices may optionally supply Vital Product Data. Each 'page'
728 * of VPD is defined in the appropriate SCSI document (eg SPC, SBC).
729 * If the device supports this VPD page, this routine returns a pointer
730 * to a buffer containing the data from that page. The caller is
731 * responsible for calling kfree() on this pointer when it is no longer
732 * needed. If we cannot retrieve the VPD page this routine returns %NULL.
733 */
734int scsi_get_vpd_page(struct scsi_device *sdev, u8 page, unsigned char *buf,
735 int buf_len)
736{
737 int i, result;
738
739 if (sdev->skip_vpd_pages)
740 goto fail;
741
742 /* Ask for all the pages supported by this device */
743 result = scsi_vpd_inquiry(sdev, buf, 0, buf_len);
744 if (result < 4)
745 goto fail;
746
747 /* If the user actually wanted this page, we can skip the rest */
748 if (page == 0)
749 return 0;
750
751 for (i = 4; i < min(result, buf_len); i++)
752 if (buf[i] == page)
753 goto found;
754
755 if (i < result && i >= buf_len)
756 /* ran off the end of the buffer, give us benefit of doubt */
757 goto found;
758 /* The device claims it doesn't support the requested page */
759 goto fail;
760
761 found:
762 result = scsi_vpd_inquiry(sdev, buf, page, buf_len);
763 if (result < 0)
764 goto fail;
765
766 return 0;
767
768 fail:
769 return -EINVAL;
770}
771EXPORT_SYMBOL_GPL(scsi_get_vpd_page);
772
773/**
774 * scsi_attach_vpd - Attach Vital Product Data to a SCSI device structure
775 * @sdev: The device to ask
776 *
777 * Attach the 'Device Identification' VPD page (0x83) and the
778 * 'Unit Serial Number' VPD page (0x80) to a SCSI device
779 * structure. This information can be used to identify the device
780 * uniquely.
781 */
782void scsi_attach_vpd(struct scsi_device *sdev)
783{
784 int result, i;
785 int vpd_len = SCSI_VPD_PG_LEN;
786 int pg80_supported = 0;
787 int pg83_supported = 0;
788 unsigned char __rcu *vpd_buf, *orig_vpd_buf = NULL;
789
790 if (!scsi_device_supports_vpd(sdev))
791 return;
792
793retry_pg0:
794 vpd_buf = kmalloc(vpd_len, GFP_KERNEL);
795 if (!vpd_buf)
796 return;
797
798 /* Ask for all the pages supported by this device */
799 result = scsi_vpd_inquiry(sdev, vpd_buf, 0, vpd_len);
800 if (result < 0) {
801 kfree(vpd_buf);
802 return;
803 }
804 if (result > vpd_len) {
805 vpd_len = result;
806 kfree(vpd_buf);
807 goto retry_pg0;
808 }
809
810 for (i = 4; i < result; i++) {
811 if (vpd_buf[i] == 0x80)
812 pg80_supported = 1;
813 if (vpd_buf[i] == 0x83)
814 pg83_supported = 1;
815 }
816 kfree(vpd_buf);
817 vpd_len = SCSI_VPD_PG_LEN;
818
819 if (pg80_supported) {
820retry_pg80:
821 vpd_buf = kmalloc(vpd_len, GFP_KERNEL);
822 if (!vpd_buf)
823 return;
824
825 result = scsi_vpd_inquiry(sdev, vpd_buf, 0x80, vpd_len);
826 if (result < 0) {
827 kfree(vpd_buf);
828 return;
829 }
830 if (result > vpd_len) {
831 vpd_len = result;
832 kfree(vpd_buf);
833 goto retry_pg80;
834 }
835 mutex_lock(&sdev->inquiry_mutex);
836 orig_vpd_buf = sdev->vpd_pg80;
837 sdev->vpd_pg80_len = result;
838 rcu_assign_pointer(sdev->vpd_pg80, vpd_buf);
839 mutex_unlock(&sdev->inquiry_mutex);
840 synchronize_rcu();
841 if (orig_vpd_buf) {
842 kfree(orig_vpd_buf);
843 orig_vpd_buf = NULL;
844 }
845 vpd_len = SCSI_VPD_PG_LEN;
846 }
847
848 if (pg83_supported) {
849retry_pg83:
850 vpd_buf = kmalloc(vpd_len, GFP_KERNEL);
851 if (!vpd_buf)
852 return;
853
854 result = scsi_vpd_inquiry(sdev, vpd_buf, 0x83, vpd_len);
855 if (result < 0) {
856 kfree(vpd_buf);
857 return;
858 }
859 if (result > vpd_len) {
860 vpd_len = result;
861 kfree(vpd_buf);
862 goto retry_pg83;
863 }
864 mutex_lock(&sdev->inquiry_mutex);
865 orig_vpd_buf = sdev->vpd_pg83;
866 sdev->vpd_pg83_len = result;
867 rcu_assign_pointer(sdev->vpd_pg83, vpd_buf);
868 mutex_unlock(&sdev->inquiry_mutex);
869 synchronize_rcu();
870 if (orig_vpd_buf)
871 kfree(orig_vpd_buf);
872 }
873}
874
875/**
876 * scsi_report_opcode - Find out if a given command opcode is supported
877 * @sdev: scsi device to query
878 * @buffer: scratch buffer (must be at least 20 bytes long)
879 * @len: length of buffer
880 * @opcode: opcode for command to look up
881 *
882 * Uses the REPORT SUPPORTED OPERATION CODES to look up the given
883 * opcode. Returns -EINVAL if RSOC fails, 0 if the command opcode is
884 * unsupported and 1 if the device claims to support the command.
885 */
886int scsi_report_opcode(struct scsi_device *sdev, unsigned char *buffer,
887 unsigned int len, unsigned char opcode)
888{
889 unsigned char cmd[16];
890 struct scsi_sense_hdr sshdr;
891 int result;
892
893 if (sdev->no_report_opcodes || sdev->scsi_level < SCSI_SPC_3)
894 return -EINVAL;
895
896 memset(cmd, 0, 16);
897 cmd[0] = MAINTENANCE_IN;
898 cmd[1] = MI_REPORT_SUPPORTED_OPERATION_CODES;
899 cmd[2] = 1; /* One command format */
900 cmd[3] = opcode;
901 put_unaligned_be32(len, &cmd[6]);
902 memset(buffer, 0, len);
903
904 result = scsi_execute_req(sdev, cmd, DMA_FROM_DEVICE, buffer, len,
905 &sshdr, 30 * HZ, 3, NULL);
906
907 if (result && scsi_sense_valid(&sshdr) &&
908 sshdr.sense_key == ILLEGAL_REQUEST &&
909 (sshdr.asc == 0x20 || sshdr.asc == 0x24) && sshdr.ascq == 0x00)
910 return -EINVAL;
911
912 if ((buffer[1] & 3) == 3) /* Command supported */
913 return 1;
914
915 return 0;
916}
917EXPORT_SYMBOL(scsi_report_opcode);
918
919/**
920 * scsi_device_get - get an additional reference to a scsi_device
921 * @sdev: device to get a reference to
922 *
923 * Description: Gets a reference to the scsi_device and increments the use count
924 * of the underlying LLDD module. You must hold host_lock of the
925 * parent Scsi_Host or already have a reference when calling this.
926 *
927 * This will fail if a device is deleted or cancelled, or when the LLD module
928 * is in the process of being unloaded.
929 */
930int scsi_device_get(struct scsi_device *sdev)
931{
932 if (sdev->sdev_state == SDEV_DEL || sdev->sdev_state == SDEV_CANCEL)
933 goto fail;
934 if (!get_device(&sdev->sdev_gendev))
935 goto fail;
936 if (!try_module_get(sdev->host->hostt->module))
937 goto fail_put_device;
938 return 0;
939
940fail_put_device:
941 put_device(&sdev->sdev_gendev);
942fail:
943 return -ENXIO;
944}
945EXPORT_SYMBOL(scsi_device_get);
946
947/**
948 * scsi_device_put - release a reference to a scsi_device
949 * @sdev: device to release a reference on.
950 *
951 * Description: Release a reference to the scsi_device and decrements the use
952 * count of the underlying LLDD module. The device is freed once the last
953 * user vanishes.
954 */
955void scsi_device_put(struct scsi_device *sdev)
956{
957 module_put(sdev->host->hostt->module);
958 put_device(&sdev->sdev_gendev);
959}
960EXPORT_SYMBOL(scsi_device_put);
961
962/* helper for shost_for_each_device, see that for documentation */
963struct scsi_device *__scsi_iterate_devices(struct Scsi_Host *shost,
964 struct scsi_device *prev)
965{
966 struct list_head *list = (prev ? &prev->siblings : &shost->__devices);
967 struct scsi_device *next = NULL;
968 unsigned long flags;
969
970 spin_lock_irqsave(shost->host_lock, flags);
971 while (list->next != &shost->__devices) {
972 next = list_entry(list->next, struct scsi_device, siblings);
973 /* skip devices that we can't get a reference to */
974 if (!scsi_device_get(next))
975 break;
976 next = NULL;
977 list = list->next;
978 }
979 spin_unlock_irqrestore(shost->host_lock, flags);
980
981 if (prev)
982 scsi_device_put(prev);
983 return next;
984}
985EXPORT_SYMBOL(__scsi_iterate_devices);
986
987/**
988 * starget_for_each_device - helper to walk all devices of a target
989 * @starget: target whose devices we want to iterate over.
990 * @data: Opaque passed to each function call.
991 * @fn: Function to call on each device
992 *
993 * This traverses over each device of @starget. The devices have
994 * a reference that must be released by scsi_host_put when breaking
995 * out of the loop.
996 */
997void starget_for_each_device(struct scsi_target *starget, void *data,
998 void (*fn)(struct scsi_device *, void *))
999{
1000 struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
1001 struct scsi_device *sdev;
1002
1003 shost_for_each_device(sdev, shost) {
1004 if ((sdev->channel == starget->channel) &&
1005 (sdev->id == starget->id))
1006 fn(sdev, data);
1007 }
1008}
1009EXPORT_SYMBOL(starget_for_each_device);
1010
1011/**
1012 * __starget_for_each_device - helper to walk all devices of a target (UNLOCKED)
1013 * @starget: target whose devices we want to iterate over.
1014 * @data: parameter for callback @fn()
1015 * @fn: callback function that is invoked for each device
1016 *
1017 * This traverses over each device of @starget. It does _not_
1018 * take a reference on the scsi_device, so the whole loop must be
1019 * protected by shost->host_lock.
1020 *
1021 * Note: The only reason why drivers would want to use this is because
1022 * they need to access the device list in irq context. Otherwise you
1023 * really want to use starget_for_each_device instead.
1024 **/
1025void __starget_for_each_device(struct scsi_target *starget, void *data,
1026 void (*fn)(struct scsi_device *, void *))
1027{
1028 struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
1029 struct scsi_device *sdev;
1030
1031 __shost_for_each_device(sdev, shost) {
1032 if ((sdev->channel == starget->channel) &&
1033 (sdev->id == starget->id))
1034 fn(sdev, data);
1035 }
1036}
1037EXPORT_SYMBOL(__starget_for_each_device);
1038
1039/**
1040 * __scsi_device_lookup_by_target - find a device given the target (UNLOCKED)
1041 * @starget: SCSI target pointer
1042 * @lun: SCSI Logical Unit Number
1043 *
1044 * Description: Looks up the scsi_device with the specified @lun for a given
1045 * @starget. The returned scsi_device does not have an additional
1046 * reference. You must hold the host's host_lock over this call and
1047 * any access to the returned scsi_device. A scsi_device in state
1048 * SDEV_DEL is skipped.
1049 *
1050 * Note: The only reason why drivers should use this is because
1051 * they need to access the device list in irq context. Otherwise you
1052 * really want to use scsi_device_lookup_by_target instead.
1053 **/
1054struct scsi_device *__scsi_device_lookup_by_target(struct scsi_target *starget,
1055 u64 lun)
1056{
1057 struct scsi_device *sdev;
1058
1059 list_for_each_entry(sdev, &starget->devices, same_target_siblings) {
1060 if (sdev->sdev_state == SDEV_DEL)
1061 continue;
1062 if (sdev->lun ==lun)
1063 return sdev;
1064 }
1065
1066 return NULL;
1067}
1068EXPORT_SYMBOL(__scsi_device_lookup_by_target);
1069
1070/**
1071 * scsi_device_lookup_by_target - find a device given the target
1072 * @starget: SCSI target pointer
1073 * @lun: SCSI Logical Unit Number
1074 *
1075 * Description: Looks up the scsi_device with the specified @lun for a given
1076 * @starget. The returned scsi_device has an additional reference that
1077 * needs to be released with scsi_device_put once you're done with it.
1078 **/
1079struct scsi_device *scsi_device_lookup_by_target(struct scsi_target *starget,
1080 u64 lun)
1081{
1082 struct scsi_device *sdev;
1083 struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
1084 unsigned long flags;
1085
1086 spin_lock_irqsave(shost->host_lock, flags);
1087 sdev = __scsi_device_lookup_by_target(starget, lun);
1088 if (sdev && scsi_device_get(sdev))
1089 sdev = NULL;
1090 spin_unlock_irqrestore(shost->host_lock, flags);
1091
1092 return sdev;
1093}
1094EXPORT_SYMBOL(scsi_device_lookup_by_target);
1095
1096/**
1097 * __scsi_device_lookup - find a device given the host (UNLOCKED)
1098 * @shost: SCSI host pointer
1099 * @channel: SCSI channel (zero if only one channel)
1100 * @id: SCSI target number (physical unit number)
1101 * @lun: SCSI Logical Unit Number
1102 *
1103 * Description: Looks up the scsi_device with the specified @channel, @id, @lun
1104 * for a given host. The returned scsi_device does not have an additional
1105 * reference. You must hold the host's host_lock over this call and any access
1106 * to the returned scsi_device.
1107 *
1108 * Note: The only reason why drivers would want to use this is because
1109 * they need to access the device list in irq context. Otherwise you
1110 * really want to use scsi_device_lookup instead.
1111 **/
1112struct scsi_device *__scsi_device_lookup(struct Scsi_Host *shost,
1113 uint channel, uint id, u64 lun)
1114{
1115 struct scsi_device *sdev;
1116
1117 list_for_each_entry(sdev, &shost->__devices, siblings) {
1118 if (sdev->channel == channel && sdev->id == id &&
1119 sdev->lun ==lun)
1120 return sdev;
1121 }
1122
1123 return NULL;
1124}
1125EXPORT_SYMBOL(__scsi_device_lookup);
1126
1127/**
1128 * scsi_device_lookup - find a device given the host
1129 * @shost: SCSI host pointer
1130 * @channel: SCSI channel (zero if only one channel)
1131 * @id: SCSI target number (physical unit number)
1132 * @lun: SCSI Logical Unit Number
1133 *
1134 * Description: Looks up the scsi_device with the specified @channel, @id, @lun
1135 * for a given host. The returned scsi_device has an additional reference that
1136 * needs to be released with scsi_device_put once you're done with it.
1137 **/
1138struct scsi_device *scsi_device_lookup(struct Scsi_Host *shost,
1139 uint channel, uint id, u64 lun)
1140{
1141 struct scsi_device *sdev;
1142 unsigned long flags;
1143
1144 spin_lock_irqsave(shost->host_lock, flags);
1145 sdev = __scsi_device_lookup(shost, channel, id, lun);
1146 if (sdev && scsi_device_get(sdev))
1147 sdev = NULL;
1148 spin_unlock_irqrestore(shost->host_lock, flags);
1149
1150 return sdev;
1151}
1152EXPORT_SYMBOL(scsi_device_lookup);
1153
1154MODULE_DESCRIPTION("SCSI core");
1155MODULE_LICENSE("GPL");
1156
1157module_param(scsi_logging_level, int, S_IRUGO|S_IWUSR);
1158MODULE_PARM_DESC(scsi_logging_level, "a bit mask of logging levels");
1159
1160#ifdef CONFIG_SCSI_MQ_DEFAULT
1161bool scsi_use_blk_mq = true;
1162#else
1163bool scsi_use_blk_mq = false;
1164#endif
1165module_param_named(use_blk_mq, scsi_use_blk_mq, bool, S_IWUSR | S_IRUGO);
1166
1167static int __init init_scsi(void)
1168{
1169 int error;
1170
1171 error = scsi_init_queue();
1172 if (error)
1173 return error;
1174 error = scsi_init_procfs();
1175 if (error)
1176 goto cleanup_queue;
1177 error = scsi_init_devinfo();
1178 if (error)
1179 goto cleanup_procfs;
1180 error = scsi_init_hosts();
1181 if (error)
1182 goto cleanup_devlist;
1183 error = scsi_init_sysctl();
1184 if (error)
1185 goto cleanup_hosts;
1186 error = scsi_sysfs_register();
1187 if (error)
1188 goto cleanup_sysctl;
1189
1190 scsi_netlink_init();
1191
1192 printk(KERN_NOTICE "SCSI subsystem initialized\n");
1193 return 0;
1194
1195cleanup_sysctl:
1196 scsi_exit_sysctl();
1197cleanup_hosts:
1198 scsi_exit_hosts();
1199cleanup_devlist:
1200 scsi_exit_devinfo();
1201cleanup_procfs:
1202 scsi_exit_procfs();
1203cleanup_queue:
1204 scsi_exit_queue();
1205 printk(KERN_ERR "SCSI subsystem failed to initialize, error = %d\n",
1206 -error);
1207 return error;
1208}
1209
1210static void __exit exit_scsi(void)
1211{
1212 scsi_netlink_exit();
1213 scsi_sysfs_unregister();
1214 scsi_exit_sysctl();
1215 scsi_exit_hosts();
1216 scsi_exit_devinfo();
1217 scsi_exit_procfs();
1218 scsi_exit_queue();
1219 async_unregister_domain(&scsi_sd_probe_domain);
1220}
1221
1222subsys_initcall(init_scsi);
1223module_exit(exit_scsi);