Loading...
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * USB Network driver infrastructure
4 * Copyright (C) 2000-2005 by David Brownell
5 * Copyright (C) 2003-2005 David Hollis <dhollis@davehollis.com>
6 */
7
8/*
9 * This is a generic "USB networking" framework that works with several
10 * kinds of full and high speed networking devices: host-to-host cables,
11 * smart usb peripherals, and actual Ethernet adapters.
12 *
13 * These devices usually differ in terms of control protocols (if they
14 * even have one!) and sometimes they define new framing to wrap or batch
15 * Ethernet packets. Otherwise, they talk to USB pretty much the same,
16 * so interface (un)binding, endpoint I/O queues, fault handling, and other
17 * issues can usefully be addressed by this framework.
18 */
19
20#include <linux/module.h>
21#include <linux/init.h>
22#include <linux/netdevice.h>
23#include <linux/etherdevice.h>
24#include <linux/ctype.h>
25#include <linux/ethtool.h>
26#include <linux/workqueue.h>
27#include <linux/mii.h>
28#include <linux/usb.h>
29#include <linux/usb/usbnet.h>
30#include <linux/slab.h>
31#include <linux/kernel.h>
32#include <linux/pm_runtime.h>
33
34/*-------------------------------------------------------------------------*/
35
36/*
37 * Nineteen USB 1.1 max size bulk transactions per frame (ms), max.
38 * Several dozen bytes of IPv4 data can fit in two such transactions.
39 * One maximum size Ethernet packet takes twenty four of them.
40 * For high speed, each frame comfortably fits almost 36 max size
41 * Ethernet packets (so queues should be bigger).
42 *
43 * The goal is to let the USB host controller be busy for 5msec or
44 * more before an irq is required, under load. Jumbograms change
45 * the equation.
46 */
47#define MAX_QUEUE_MEMORY (60 * 1518)
48#define RX_QLEN(dev) ((dev)->rx_qlen)
49#define TX_QLEN(dev) ((dev)->tx_qlen)
50
51// reawaken network queue this soon after stopping; else watchdog barks
52#define TX_TIMEOUT_JIFFIES (5*HZ)
53
54/* throttle rx/tx briefly after some faults, so hub_wq might disconnect()
55 * us (it polls at HZ/4 usually) before we report too many false errors.
56 */
57#define THROTTLE_JIFFIES (HZ/8)
58
59// between wakeups
60#define UNLINK_TIMEOUT_MS 3
61
62/*-------------------------------------------------------------------------*/
63
64// randomly generated ethernet address
65static u8 node_id [ETH_ALEN];
66
67/* use ethtool to change the level for any given device */
68static int msg_level = -1;
69module_param (msg_level, int, 0);
70MODULE_PARM_DESC (msg_level, "Override default message level");
71
72/*-------------------------------------------------------------------------*/
73
74static const char * const usbnet_event_names[] = {
75 [EVENT_TX_HALT] = "EVENT_TX_HALT",
76 [EVENT_RX_HALT] = "EVENT_RX_HALT",
77 [EVENT_RX_MEMORY] = "EVENT_RX_MEMORY",
78 [EVENT_STS_SPLIT] = "EVENT_STS_SPLIT",
79 [EVENT_LINK_RESET] = "EVENT_LINK_RESET",
80 [EVENT_RX_PAUSED] = "EVENT_RX_PAUSED",
81 [EVENT_DEV_ASLEEP] = "EVENT_DEV_ASLEEP",
82 [EVENT_DEV_OPEN] = "EVENT_DEV_OPEN",
83 [EVENT_DEVICE_REPORT_IDLE] = "EVENT_DEVICE_REPORT_IDLE",
84 [EVENT_NO_RUNTIME_PM] = "EVENT_NO_RUNTIME_PM",
85 [EVENT_RX_KILL] = "EVENT_RX_KILL",
86 [EVENT_LINK_CHANGE] = "EVENT_LINK_CHANGE",
87 [EVENT_SET_RX_MODE] = "EVENT_SET_RX_MODE",
88 [EVENT_NO_IP_ALIGN] = "EVENT_NO_IP_ALIGN",
89};
90
91/* handles CDC Ethernet and many other network "bulk data" interfaces */
92int usbnet_get_endpoints(struct usbnet *dev, struct usb_interface *intf)
93{
94 int tmp;
95 struct usb_host_interface *alt = NULL;
96 struct usb_host_endpoint *in = NULL, *out = NULL;
97 struct usb_host_endpoint *status = NULL;
98
99 for (tmp = 0; tmp < intf->num_altsetting; tmp++) {
100 unsigned ep;
101
102 in = out = status = NULL;
103 alt = intf->altsetting + tmp;
104
105 /* take the first altsetting with in-bulk + out-bulk;
106 * remember any status endpoint, just in case;
107 * ignore other endpoints and altsettings.
108 */
109 for (ep = 0; ep < alt->desc.bNumEndpoints; ep++) {
110 struct usb_host_endpoint *e;
111 int intr = 0;
112
113 e = alt->endpoint + ep;
114
115 /* ignore endpoints which cannot transfer data */
116 if (!usb_endpoint_maxp(&e->desc))
117 continue;
118
119 switch (e->desc.bmAttributes) {
120 case USB_ENDPOINT_XFER_INT:
121 if (!usb_endpoint_dir_in(&e->desc))
122 continue;
123 intr = 1;
124 fallthrough;
125 case USB_ENDPOINT_XFER_BULK:
126 break;
127 default:
128 continue;
129 }
130 if (usb_endpoint_dir_in(&e->desc)) {
131 if (!intr && !in)
132 in = e;
133 else if (intr && !status)
134 status = e;
135 } else {
136 if (!out)
137 out = e;
138 }
139 }
140 if (in && out)
141 break;
142 }
143 if (!alt || !in || !out)
144 return -EINVAL;
145
146 if (alt->desc.bAlternateSetting != 0 ||
147 !(dev->driver_info->flags & FLAG_NO_SETINT)) {
148 tmp = usb_set_interface (dev->udev, alt->desc.bInterfaceNumber,
149 alt->desc.bAlternateSetting);
150 if (tmp < 0)
151 return tmp;
152 }
153
154 dev->in = usb_rcvbulkpipe (dev->udev,
155 in->desc.bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
156 dev->out = usb_sndbulkpipe (dev->udev,
157 out->desc.bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
158 dev->status = status;
159 return 0;
160}
161EXPORT_SYMBOL_GPL(usbnet_get_endpoints);
162
163int usbnet_get_ethernet_addr(struct usbnet *dev, int iMACAddress)
164{
165 u8 addr[ETH_ALEN];
166 int tmp = -1, ret;
167 unsigned char buf [13];
168
169 ret = usb_string(dev->udev, iMACAddress, buf, sizeof buf);
170 if (ret == 12)
171 tmp = hex2bin(addr, buf, 6);
172 if (tmp < 0) {
173 dev_dbg(&dev->udev->dev,
174 "bad MAC string %d fetch, %d\n", iMACAddress, tmp);
175 if (ret >= 0)
176 ret = -EINVAL;
177 return ret;
178 }
179 eth_hw_addr_set(dev->net, addr);
180 return 0;
181}
182EXPORT_SYMBOL_GPL(usbnet_get_ethernet_addr);
183
184static void intr_complete (struct urb *urb)
185{
186 struct usbnet *dev = urb->context;
187 int status = urb->status;
188
189 switch (status) {
190 /* success */
191 case 0:
192 dev->driver_info->status(dev, urb);
193 break;
194
195 /* software-driven interface shutdown */
196 case -ENOENT: /* urb killed */
197 case -ESHUTDOWN: /* hardware gone */
198 netif_dbg(dev, ifdown, dev->net,
199 "intr shutdown, code %d\n", status);
200 return;
201
202 /* NOTE: not throttling like RX/TX, since this endpoint
203 * already polls infrequently
204 */
205 default:
206 netdev_dbg(dev->net, "intr status %d\n", status);
207 break;
208 }
209
210 status = usb_submit_urb (urb, GFP_ATOMIC);
211 if (status != 0)
212 netif_err(dev, timer, dev->net,
213 "intr resubmit --> %d\n", status);
214}
215
216static int init_status (struct usbnet *dev, struct usb_interface *intf)
217{
218 char *buf = NULL;
219 unsigned pipe = 0;
220 unsigned maxp;
221 unsigned period;
222
223 if (!dev->driver_info->status)
224 return 0;
225
226 pipe = usb_rcvintpipe (dev->udev,
227 dev->status->desc.bEndpointAddress
228 & USB_ENDPOINT_NUMBER_MASK);
229 maxp = usb_maxpacket(dev->udev, pipe);
230
231 /* avoid 1 msec chatter: min 8 msec poll rate */
232 period = max ((int) dev->status->desc.bInterval,
233 (dev->udev->speed == USB_SPEED_HIGH) ? 7 : 3);
234
235 buf = kmalloc (maxp, GFP_KERNEL);
236 if (buf) {
237 dev->interrupt = usb_alloc_urb (0, GFP_KERNEL);
238 if (!dev->interrupt) {
239 kfree (buf);
240 return -ENOMEM;
241 } else {
242 usb_fill_int_urb(dev->interrupt, dev->udev, pipe,
243 buf, maxp, intr_complete, dev, period);
244 dev->interrupt->transfer_flags |= URB_FREE_BUFFER;
245 dev_dbg(&intf->dev,
246 "status ep%din, %d bytes period %d\n",
247 usb_pipeendpoint(pipe), maxp, period);
248 }
249 }
250 return 0;
251}
252
253/* Submit the interrupt URB if not previously submitted, increasing refcount */
254int usbnet_status_start(struct usbnet *dev, gfp_t mem_flags)
255{
256 int ret = 0;
257
258 WARN_ON_ONCE(dev->interrupt == NULL);
259 if (dev->interrupt) {
260 mutex_lock(&dev->interrupt_mutex);
261
262 if (++dev->interrupt_count == 1)
263 ret = usb_submit_urb(dev->interrupt, mem_flags);
264
265 dev_dbg(&dev->udev->dev, "incremented interrupt URB count to %d\n",
266 dev->interrupt_count);
267 mutex_unlock(&dev->interrupt_mutex);
268 }
269 return ret;
270}
271EXPORT_SYMBOL_GPL(usbnet_status_start);
272
273/* For resume; submit interrupt URB if previously submitted */
274static int __usbnet_status_start_force(struct usbnet *dev, gfp_t mem_flags)
275{
276 int ret = 0;
277
278 mutex_lock(&dev->interrupt_mutex);
279 if (dev->interrupt_count) {
280 ret = usb_submit_urb(dev->interrupt, mem_flags);
281 dev_dbg(&dev->udev->dev,
282 "submitted interrupt URB for resume\n");
283 }
284 mutex_unlock(&dev->interrupt_mutex);
285 return ret;
286}
287
288/* Kill the interrupt URB if all submitters want it killed */
289void usbnet_status_stop(struct usbnet *dev)
290{
291 if (dev->interrupt) {
292 mutex_lock(&dev->interrupt_mutex);
293 WARN_ON(dev->interrupt_count == 0);
294
295 if (dev->interrupt_count && --dev->interrupt_count == 0)
296 usb_kill_urb(dev->interrupt);
297
298 dev_dbg(&dev->udev->dev,
299 "decremented interrupt URB count to %d\n",
300 dev->interrupt_count);
301 mutex_unlock(&dev->interrupt_mutex);
302 }
303}
304EXPORT_SYMBOL_GPL(usbnet_status_stop);
305
306/* For suspend; always kill interrupt URB */
307static void __usbnet_status_stop_force(struct usbnet *dev)
308{
309 if (dev->interrupt) {
310 mutex_lock(&dev->interrupt_mutex);
311 usb_kill_urb(dev->interrupt);
312 dev_dbg(&dev->udev->dev, "killed interrupt URB for suspend\n");
313 mutex_unlock(&dev->interrupt_mutex);
314 }
315}
316
317/* Passes this packet up the stack, updating its accounting.
318 * Some link protocols batch packets, so their rx_fixup paths
319 * can return clones as well as just modify the original skb.
320 */
321void usbnet_skb_return (struct usbnet *dev, struct sk_buff *skb)
322{
323 struct pcpu_sw_netstats *stats64 = this_cpu_ptr(dev->net->tstats);
324 unsigned long flags;
325 int status;
326
327 if (test_bit(EVENT_RX_PAUSED, &dev->flags)) {
328 skb_queue_tail(&dev->rxq_pause, skb);
329 return;
330 }
331
332 /* only update if unset to allow minidriver rx_fixup override */
333 if (skb->protocol == 0)
334 skb->protocol = eth_type_trans (skb, dev->net);
335
336 flags = u64_stats_update_begin_irqsave(&stats64->syncp);
337 u64_stats_inc(&stats64->rx_packets);
338 u64_stats_add(&stats64->rx_bytes, skb->len);
339 u64_stats_update_end_irqrestore(&stats64->syncp, flags);
340
341 netif_dbg(dev, rx_status, dev->net, "< rx, len %zu, type 0x%x\n",
342 skb->len + sizeof (struct ethhdr), skb->protocol);
343 memset (skb->cb, 0, sizeof (struct skb_data));
344
345 if (skb_defer_rx_timestamp(skb))
346 return;
347
348 status = netif_rx (skb);
349 if (status != NET_RX_SUCCESS)
350 netif_dbg(dev, rx_err, dev->net,
351 "netif_rx status %d\n", status);
352}
353EXPORT_SYMBOL_GPL(usbnet_skb_return);
354
355/* must be called if hard_mtu or rx_urb_size changed */
356void usbnet_update_max_qlen(struct usbnet *dev)
357{
358 enum usb_device_speed speed = dev->udev->speed;
359
360 if (!dev->rx_urb_size || !dev->hard_mtu)
361 goto insanity;
362 switch (speed) {
363 case USB_SPEED_HIGH:
364 dev->rx_qlen = MAX_QUEUE_MEMORY / dev->rx_urb_size;
365 dev->tx_qlen = MAX_QUEUE_MEMORY / dev->hard_mtu;
366 break;
367 case USB_SPEED_SUPER:
368 case USB_SPEED_SUPER_PLUS:
369 /*
370 * Not take default 5ms qlen for super speed HC to
371 * save memory, and iperf tests show 2.5ms qlen can
372 * work well
373 */
374 dev->rx_qlen = 5 * MAX_QUEUE_MEMORY / dev->rx_urb_size;
375 dev->tx_qlen = 5 * MAX_QUEUE_MEMORY / dev->hard_mtu;
376 break;
377 default:
378insanity:
379 dev->rx_qlen = dev->tx_qlen = 4;
380 }
381}
382EXPORT_SYMBOL_GPL(usbnet_update_max_qlen);
383
384
385/*-------------------------------------------------------------------------
386 *
387 * Network Device Driver (peer link to "Host Device", from USB host)
388 *
389 *-------------------------------------------------------------------------*/
390
391int usbnet_change_mtu (struct net_device *net, int new_mtu)
392{
393 struct usbnet *dev = netdev_priv(net);
394 int ll_mtu = new_mtu + net->hard_header_len;
395 int old_hard_mtu = dev->hard_mtu;
396 int old_rx_urb_size = dev->rx_urb_size;
397
398 // no second zero-length packet read wanted after mtu-sized packets
399 if ((ll_mtu % dev->maxpacket) == 0)
400 return -EDOM;
401 net->mtu = new_mtu;
402
403 dev->hard_mtu = net->mtu + net->hard_header_len;
404 if (dev->rx_urb_size == old_hard_mtu) {
405 dev->rx_urb_size = dev->hard_mtu;
406 if (dev->rx_urb_size > old_rx_urb_size) {
407 usbnet_pause_rx(dev);
408 usbnet_unlink_rx_urbs(dev);
409 usbnet_resume_rx(dev);
410 }
411 }
412
413 /* max qlen depend on hard_mtu and rx_urb_size */
414 usbnet_update_max_qlen(dev);
415
416 return 0;
417}
418EXPORT_SYMBOL_GPL(usbnet_change_mtu);
419
420/* The caller must hold list->lock */
421static void __usbnet_queue_skb(struct sk_buff_head *list,
422 struct sk_buff *newsk, enum skb_state state)
423{
424 struct skb_data *entry = (struct skb_data *) newsk->cb;
425
426 __skb_queue_tail(list, newsk);
427 entry->state = state;
428}
429
430/*-------------------------------------------------------------------------*/
431
432/* some LK 2.4 HCDs oopsed if we freed or resubmitted urbs from
433 * completion callbacks. 2.5 should have fixed those bugs...
434 */
435
436static enum skb_state defer_bh(struct usbnet *dev, struct sk_buff *skb,
437 struct sk_buff_head *list, enum skb_state state)
438{
439 unsigned long flags;
440 enum skb_state old_state;
441 struct skb_data *entry = (struct skb_data *) skb->cb;
442
443 spin_lock_irqsave(&list->lock, flags);
444 old_state = entry->state;
445 entry->state = state;
446 __skb_unlink(skb, list);
447
448 /* defer_bh() is never called with list == &dev->done.
449 * spin_lock_nested() tells lockdep that it is OK to take
450 * dev->done.lock here with list->lock held.
451 */
452 spin_lock_nested(&dev->done.lock, SINGLE_DEPTH_NESTING);
453
454 __skb_queue_tail(&dev->done, skb);
455 if (dev->done.qlen == 1)
456 tasklet_schedule(&dev->bh);
457 spin_unlock(&dev->done.lock);
458 spin_unlock_irqrestore(&list->lock, flags);
459 return old_state;
460}
461
462/* some work can't be done in tasklets, so we use keventd
463 *
464 * NOTE: annoying asymmetry: if it's active, schedule_work() fails,
465 * but tasklet_schedule() doesn't. hope the failure is rare.
466 */
467void usbnet_defer_kevent (struct usbnet *dev, int work)
468{
469 set_bit (work, &dev->flags);
470 if (!schedule_work (&dev->kevent))
471 netdev_dbg(dev->net, "kevent %s may have been dropped\n", usbnet_event_names[work]);
472 else
473 netdev_dbg(dev->net, "kevent %s scheduled\n", usbnet_event_names[work]);
474}
475EXPORT_SYMBOL_GPL(usbnet_defer_kevent);
476
477/*-------------------------------------------------------------------------*/
478
479static void rx_complete (struct urb *urb);
480
481static int rx_submit (struct usbnet *dev, struct urb *urb, gfp_t flags)
482{
483 struct sk_buff *skb;
484 struct skb_data *entry;
485 int retval = 0;
486 unsigned long lockflags;
487 size_t size = dev->rx_urb_size;
488
489 /* prevent rx skb allocation when error ratio is high */
490 if (test_bit(EVENT_RX_KILL, &dev->flags)) {
491 usb_free_urb(urb);
492 return -ENOLINK;
493 }
494
495 if (test_bit(EVENT_NO_IP_ALIGN, &dev->flags))
496 skb = __netdev_alloc_skb(dev->net, size, flags);
497 else
498 skb = __netdev_alloc_skb_ip_align(dev->net, size, flags);
499 if (!skb) {
500 netif_dbg(dev, rx_err, dev->net, "no rx skb\n");
501 usbnet_defer_kevent (dev, EVENT_RX_MEMORY);
502 usb_free_urb (urb);
503 return -ENOMEM;
504 }
505
506 entry = (struct skb_data *) skb->cb;
507 entry->urb = urb;
508 entry->dev = dev;
509 entry->length = 0;
510
511 usb_fill_bulk_urb (urb, dev->udev, dev->in,
512 skb->data, size, rx_complete, skb);
513
514 spin_lock_irqsave (&dev->rxq.lock, lockflags);
515
516 if (netif_running (dev->net) &&
517 netif_device_present (dev->net) &&
518 test_bit(EVENT_DEV_OPEN, &dev->flags) &&
519 !test_bit (EVENT_RX_HALT, &dev->flags) &&
520 !test_bit (EVENT_DEV_ASLEEP, &dev->flags)) {
521 switch (retval = usb_submit_urb (urb, GFP_ATOMIC)) {
522 case -EPIPE:
523 usbnet_defer_kevent (dev, EVENT_RX_HALT);
524 break;
525 case -ENOMEM:
526 usbnet_defer_kevent (dev, EVENT_RX_MEMORY);
527 break;
528 case -ENODEV:
529 netif_dbg(dev, ifdown, dev->net, "device gone\n");
530 netif_device_detach (dev->net);
531 break;
532 case -EHOSTUNREACH:
533 retval = -ENOLINK;
534 break;
535 default:
536 netif_dbg(dev, rx_err, dev->net,
537 "rx submit, %d\n", retval);
538 tasklet_schedule (&dev->bh);
539 break;
540 case 0:
541 __usbnet_queue_skb(&dev->rxq, skb, rx_start);
542 }
543 } else {
544 netif_dbg(dev, ifdown, dev->net, "rx: stopped\n");
545 retval = -ENOLINK;
546 }
547 spin_unlock_irqrestore (&dev->rxq.lock, lockflags);
548 if (retval) {
549 dev_kfree_skb_any (skb);
550 usb_free_urb (urb);
551 }
552 return retval;
553}
554
555
556/*-------------------------------------------------------------------------*/
557
558static inline int rx_process(struct usbnet *dev, struct sk_buff *skb)
559{
560 if (dev->driver_info->rx_fixup &&
561 !dev->driver_info->rx_fixup (dev, skb)) {
562 /* With RX_ASSEMBLE, rx_fixup() must update counters */
563 if (!(dev->driver_info->flags & FLAG_RX_ASSEMBLE))
564 dev->net->stats.rx_errors++;
565 return -EPROTO;
566 }
567 // else network stack removes extra byte if we forced a short packet
568
569 /* all data was already cloned from skb inside the driver */
570 if (dev->driver_info->flags & FLAG_MULTI_PACKET)
571 return -EALREADY;
572
573 if (skb->len < ETH_HLEN) {
574 dev->net->stats.rx_errors++;
575 dev->net->stats.rx_length_errors++;
576 netif_dbg(dev, rx_err, dev->net, "rx length %d\n", skb->len);
577 return -EPROTO;
578 }
579
580 usbnet_skb_return(dev, skb);
581 return 0;
582}
583
584/*-------------------------------------------------------------------------*/
585
586static void rx_complete (struct urb *urb)
587{
588 struct sk_buff *skb = (struct sk_buff *) urb->context;
589 struct skb_data *entry = (struct skb_data *) skb->cb;
590 struct usbnet *dev = entry->dev;
591 int urb_status = urb->status;
592 enum skb_state state;
593
594 skb_put (skb, urb->actual_length);
595 state = rx_done;
596 entry->urb = NULL;
597
598 switch (urb_status) {
599 /* success */
600 case 0:
601 break;
602
603 /* stalls need manual reset. this is rare ... except that
604 * when going through USB 2.0 TTs, unplug appears this way.
605 * we avoid the highspeed version of the ETIMEDOUT/EILSEQ
606 * storm, recovering as needed.
607 */
608 case -EPIPE:
609 dev->net->stats.rx_errors++;
610 usbnet_defer_kevent (dev, EVENT_RX_HALT);
611 fallthrough;
612
613 /* software-driven interface shutdown */
614 case -ECONNRESET: /* async unlink */
615 case -ESHUTDOWN: /* hardware gone */
616 netif_dbg(dev, ifdown, dev->net,
617 "rx shutdown, code %d\n", urb_status);
618 goto block;
619
620 /* we get controller i/o faults during hub_wq disconnect() delays.
621 * throttle down resubmits, to avoid log floods; just temporarily,
622 * so we still recover when the fault isn't a hub_wq delay.
623 */
624 case -EPROTO:
625 case -ETIME:
626 case -EILSEQ:
627 dev->net->stats.rx_errors++;
628 if (!timer_pending (&dev->delay)) {
629 mod_timer (&dev->delay, jiffies + THROTTLE_JIFFIES);
630 netif_dbg(dev, link, dev->net,
631 "rx throttle %d\n", urb_status);
632 }
633block:
634 state = rx_cleanup;
635 entry->urb = urb;
636 urb = NULL;
637 break;
638
639 /* data overrun ... flush fifo? */
640 case -EOVERFLOW:
641 dev->net->stats.rx_over_errors++;
642 fallthrough;
643
644 default:
645 state = rx_cleanup;
646 dev->net->stats.rx_errors++;
647 netif_dbg(dev, rx_err, dev->net, "rx status %d\n", urb_status);
648 break;
649 }
650
651 /* stop rx if packet error rate is high */
652 if (++dev->pkt_cnt > 30) {
653 dev->pkt_cnt = 0;
654 dev->pkt_err = 0;
655 } else {
656 if (state == rx_cleanup)
657 dev->pkt_err++;
658 if (dev->pkt_err > 20)
659 set_bit(EVENT_RX_KILL, &dev->flags);
660 }
661
662 state = defer_bh(dev, skb, &dev->rxq, state);
663
664 if (urb) {
665 if (netif_running (dev->net) &&
666 !test_bit (EVENT_RX_HALT, &dev->flags) &&
667 state != unlink_start) {
668 rx_submit (dev, urb, GFP_ATOMIC);
669 usb_mark_last_busy(dev->udev);
670 return;
671 }
672 usb_free_urb (urb);
673 }
674 netif_dbg(dev, rx_err, dev->net, "no read resubmitted\n");
675}
676
677/*-------------------------------------------------------------------------*/
678void usbnet_pause_rx(struct usbnet *dev)
679{
680 set_bit(EVENT_RX_PAUSED, &dev->flags);
681
682 netif_dbg(dev, rx_status, dev->net, "paused rx queue enabled\n");
683}
684EXPORT_SYMBOL_GPL(usbnet_pause_rx);
685
686void usbnet_resume_rx(struct usbnet *dev)
687{
688 struct sk_buff *skb;
689 int num = 0;
690
691 clear_bit(EVENT_RX_PAUSED, &dev->flags);
692
693 while ((skb = skb_dequeue(&dev->rxq_pause)) != NULL) {
694 usbnet_skb_return(dev, skb);
695 num++;
696 }
697
698 tasklet_schedule(&dev->bh);
699
700 netif_dbg(dev, rx_status, dev->net,
701 "paused rx queue disabled, %d skbs requeued\n", num);
702}
703EXPORT_SYMBOL_GPL(usbnet_resume_rx);
704
705void usbnet_purge_paused_rxq(struct usbnet *dev)
706{
707 skb_queue_purge(&dev->rxq_pause);
708}
709EXPORT_SYMBOL_GPL(usbnet_purge_paused_rxq);
710
711/*-------------------------------------------------------------------------*/
712
713// unlink pending rx/tx; completion handlers do all other cleanup
714
715static int unlink_urbs (struct usbnet *dev, struct sk_buff_head *q)
716{
717 unsigned long flags;
718 struct sk_buff *skb;
719 int count = 0;
720
721 spin_lock_irqsave (&q->lock, flags);
722 while (!skb_queue_empty(q)) {
723 struct skb_data *entry;
724 struct urb *urb;
725 int retval;
726
727 skb_queue_walk(q, skb) {
728 entry = (struct skb_data *) skb->cb;
729 if (entry->state != unlink_start)
730 goto found;
731 }
732 break;
733found:
734 entry->state = unlink_start;
735 urb = entry->urb;
736
737 /*
738 * Get reference count of the URB to avoid it to be
739 * freed during usb_unlink_urb, which may trigger
740 * use-after-free problem inside usb_unlink_urb since
741 * usb_unlink_urb is always racing with .complete
742 * handler(include defer_bh).
743 */
744 usb_get_urb(urb);
745 spin_unlock_irqrestore(&q->lock, flags);
746 // during some PM-driven resume scenarios,
747 // these (async) unlinks complete immediately
748 retval = usb_unlink_urb (urb);
749 if (retval != -EINPROGRESS && retval != 0)
750 netdev_dbg(dev->net, "unlink urb err, %d\n", retval);
751 else
752 count++;
753 usb_put_urb(urb);
754 spin_lock_irqsave(&q->lock, flags);
755 }
756 spin_unlock_irqrestore (&q->lock, flags);
757 return count;
758}
759
760// Flush all pending rx urbs
761// minidrivers may need to do this when the MTU changes
762
763void usbnet_unlink_rx_urbs(struct usbnet *dev)
764{
765 if (netif_running(dev->net)) {
766 (void) unlink_urbs (dev, &dev->rxq);
767 tasklet_schedule(&dev->bh);
768 }
769}
770EXPORT_SYMBOL_GPL(usbnet_unlink_rx_urbs);
771
772/*-------------------------------------------------------------------------*/
773
774static void wait_skb_queue_empty(struct sk_buff_head *q)
775{
776 unsigned long flags;
777
778 spin_lock_irqsave(&q->lock, flags);
779 while (!skb_queue_empty(q)) {
780 spin_unlock_irqrestore(&q->lock, flags);
781 schedule_timeout(msecs_to_jiffies(UNLINK_TIMEOUT_MS));
782 set_current_state(TASK_UNINTERRUPTIBLE);
783 spin_lock_irqsave(&q->lock, flags);
784 }
785 spin_unlock_irqrestore(&q->lock, flags);
786}
787
788// precondition: never called in_interrupt
789static void usbnet_terminate_urbs(struct usbnet *dev)
790{
791 DECLARE_WAITQUEUE(wait, current);
792 int temp;
793
794 /* ensure there are no more active urbs */
795 add_wait_queue(&dev->wait, &wait);
796 set_current_state(TASK_UNINTERRUPTIBLE);
797 temp = unlink_urbs(dev, &dev->txq) +
798 unlink_urbs(dev, &dev->rxq);
799
800 /* maybe wait for deletions to finish. */
801 wait_skb_queue_empty(&dev->rxq);
802 wait_skb_queue_empty(&dev->txq);
803 wait_skb_queue_empty(&dev->done);
804 netif_dbg(dev, ifdown, dev->net,
805 "waited for %d urb completions\n", temp);
806 set_current_state(TASK_RUNNING);
807 remove_wait_queue(&dev->wait, &wait);
808}
809
810int usbnet_stop (struct net_device *net)
811{
812 struct usbnet *dev = netdev_priv(net);
813 const struct driver_info *info = dev->driver_info;
814 int retval, pm, mpn;
815
816 clear_bit(EVENT_DEV_OPEN, &dev->flags);
817 netif_stop_queue (net);
818
819 netif_info(dev, ifdown, dev->net,
820 "stop stats: rx/tx %lu/%lu, errs %lu/%lu\n",
821 net->stats.rx_packets, net->stats.tx_packets,
822 net->stats.rx_errors, net->stats.tx_errors);
823
824 /* to not race resume */
825 pm = usb_autopm_get_interface(dev->intf);
826 /* allow minidriver to stop correctly (wireless devices to turn off
827 * radio etc) */
828 if (info->stop) {
829 retval = info->stop(dev);
830 if (retval < 0)
831 netif_info(dev, ifdown, dev->net,
832 "stop fail (%d) usbnet usb-%s-%s, %s\n",
833 retval,
834 dev->udev->bus->bus_name, dev->udev->devpath,
835 info->description);
836 }
837
838 if (!(info->flags & FLAG_AVOID_UNLINK_URBS))
839 usbnet_terminate_urbs(dev);
840
841 usbnet_status_stop(dev);
842
843 usbnet_purge_paused_rxq(dev);
844
845 mpn = !test_and_clear_bit(EVENT_NO_RUNTIME_PM, &dev->flags);
846
847 /* deferred work (timer, softirq, task) must also stop */
848 dev->flags = 0;
849 del_timer_sync (&dev->delay);
850 tasklet_kill (&dev->bh);
851 cancel_work_sync(&dev->kevent);
852 if (!pm)
853 usb_autopm_put_interface(dev->intf);
854
855 if (info->manage_power && mpn)
856 info->manage_power(dev, 0);
857 else
858 usb_autopm_put_interface(dev->intf);
859
860 return 0;
861}
862EXPORT_SYMBOL_GPL(usbnet_stop);
863
864/*-------------------------------------------------------------------------*/
865
866// posts reads, and enables write queuing
867
868// precondition: never called in_interrupt
869
870int usbnet_open (struct net_device *net)
871{
872 struct usbnet *dev = netdev_priv(net);
873 int retval;
874 const struct driver_info *info = dev->driver_info;
875
876 if ((retval = usb_autopm_get_interface(dev->intf)) < 0) {
877 netif_info(dev, ifup, dev->net,
878 "resumption fail (%d) usbnet usb-%s-%s, %s\n",
879 retval,
880 dev->udev->bus->bus_name,
881 dev->udev->devpath,
882 info->description);
883 goto done_nopm;
884 }
885
886 // put into "known safe" state
887 if (info->reset && (retval = info->reset (dev)) < 0) {
888 netif_info(dev, ifup, dev->net,
889 "open reset fail (%d) usbnet usb-%s-%s, %s\n",
890 retval,
891 dev->udev->bus->bus_name,
892 dev->udev->devpath,
893 info->description);
894 goto done;
895 }
896
897 /* hard_mtu or rx_urb_size may change in reset() */
898 usbnet_update_max_qlen(dev);
899
900 // insist peer be connected
901 if (info->check_connect && (retval = info->check_connect (dev)) < 0) {
902 netif_err(dev, ifup, dev->net, "can't open; %d\n", retval);
903 goto done;
904 }
905
906 /* start any status interrupt transfer */
907 if (dev->interrupt) {
908 retval = usbnet_status_start(dev, GFP_KERNEL);
909 if (retval < 0) {
910 netif_err(dev, ifup, dev->net,
911 "intr submit %d\n", retval);
912 goto done;
913 }
914 }
915
916 set_bit(EVENT_DEV_OPEN, &dev->flags);
917 netif_start_queue (net);
918 netif_info(dev, ifup, dev->net,
919 "open: enable queueing (rx %d, tx %d) mtu %d %s framing\n",
920 (int)RX_QLEN(dev), (int)TX_QLEN(dev),
921 dev->net->mtu,
922 (dev->driver_info->flags & FLAG_FRAMING_NC) ? "NetChip" :
923 (dev->driver_info->flags & FLAG_FRAMING_GL) ? "GeneSys" :
924 (dev->driver_info->flags & FLAG_FRAMING_Z) ? "Zaurus" :
925 (dev->driver_info->flags & FLAG_FRAMING_RN) ? "RNDIS" :
926 (dev->driver_info->flags & FLAG_FRAMING_AX) ? "ASIX" :
927 "simple");
928
929 /* reset rx error state */
930 dev->pkt_cnt = 0;
931 dev->pkt_err = 0;
932 clear_bit(EVENT_RX_KILL, &dev->flags);
933
934 // delay posting reads until we're fully open
935 tasklet_schedule (&dev->bh);
936 if (info->manage_power) {
937 retval = info->manage_power(dev, 1);
938 if (retval < 0) {
939 retval = 0;
940 set_bit(EVENT_NO_RUNTIME_PM, &dev->flags);
941 } else {
942 usb_autopm_put_interface(dev->intf);
943 }
944 }
945 return retval;
946done:
947 usb_autopm_put_interface(dev->intf);
948done_nopm:
949 return retval;
950}
951EXPORT_SYMBOL_GPL(usbnet_open);
952
953/*-------------------------------------------------------------------------*/
954
955/* ethtool methods; minidrivers may need to add some more, but
956 * they'll probably want to use this base set.
957 */
958
959/* These methods are written on the assumption that the device
960 * uses MII
961 */
962int usbnet_get_link_ksettings_mii(struct net_device *net,
963 struct ethtool_link_ksettings *cmd)
964{
965 struct usbnet *dev = netdev_priv(net);
966
967 if (!dev->mii.mdio_read)
968 return -EOPNOTSUPP;
969
970 mii_ethtool_get_link_ksettings(&dev->mii, cmd);
971
972 return 0;
973}
974EXPORT_SYMBOL_GPL(usbnet_get_link_ksettings_mii);
975
976int usbnet_get_link_ksettings_internal(struct net_device *net,
977 struct ethtool_link_ksettings *cmd)
978{
979 struct usbnet *dev = netdev_priv(net);
980
981 /* the assumption that speed is equal on tx and rx
982 * is deeply engrained into the networking layer.
983 * For wireless stuff it is not true.
984 * We assume that rx_speed matters more.
985 */
986 if (dev->rx_speed != SPEED_UNSET)
987 cmd->base.speed = dev->rx_speed / 1000000;
988 else if (dev->tx_speed != SPEED_UNSET)
989 cmd->base.speed = dev->tx_speed / 1000000;
990 else
991 cmd->base.speed = SPEED_UNKNOWN;
992
993 return 0;
994}
995EXPORT_SYMBOL_GPL(usbnet_get_link_ksettings_internal);
996
997int usbnet_set_link_ksettings_mii(struct net_device *net,
998 const struct ethtool_link_ksettings *cmd)
999{
1000 struct usbnet *dev = netdev_priv(net);
1001 int retval;
1002
1003 if (!dev->mii.mdio_write)
1004 return -EOPNOTSUPP;
1005
1006 retval = mii_ethtool_set_link_ksettings(&dev->mii, cmd);
1007
1008 /* link speed/duplex might have changed */
1009 if (dev->driver_info->link_reset)
1010 dev->driver_info->link_reset(dev);
1011
1012 /* hard_mtu or rx_urb_size may change in link_reset() */
1013 usbnet_update_max_qlen(dev);
1014
1015 return retval;
1016}
1017EXPORT_SYMBOL_GPL(usbnet_set_link_ksettings_mii);
1018
1019u32 usbnet_get_link (struct net_device *net)
1020{
1021 struct usbnet *dev = netdev_priv(net);
1022
1023 /* If a check_connect is defined, return its result */
1024 if (dev->driver_info->check_connect)
1025 return dev->driver_info->check_connect (dev) == 0;
1026
1027 /* if the device has mii operations, use those */
1028 if (dev->mii.mdio_read)
1029 return mii_link_ok(&dev->mii);
1030
1031 /* Otherwise, dtrt for drivers calling netif_carrier_{on,off} */
1032 return ethtool_op_get_link(net);
1033}
1034EXPORT_SYMBOL_GPL(usbnet_get_link);
1035
1036int usbnet_nway_reset(struct net_device *net)
1037{
1038 struct usbnet *dev = netdev_priv(net);
1039
1040 if (!dev->mii.mdio_write)
1041 return -EOPNOTSUPP;
1042
1043 return mii_nway_restart(&dev->mii);
1044}
1045EXPORT_SYMBOL_GPL(usbnet_nway_reset);
1046
1047void usbnet_get_drvinfo (struct net_device *net, struct ethtool_drvinfo *info)
1048{
1049 struct usbnet *dev = netdev_priv(net);
1050
1051 strscpy(info->driver, dev->driver_name, sizeof(info->driver));
1052 strscpy(info->fw_version, dev->driver_info->description,
1053 sizeof(info->fw_version));
1054 usb_make_path (dev->udev, info->bus_info, sizeof info->bus_info);
1055}
1056EXPORT_SYMBOL_GPL(usbnet_get_drvinfo);
1057
1058u32 usbnet_get_msglevel (struct net_device *net)
1059{
1060 struct usbnet *dev = netdev_priv(net);
1061
1062 return dev->msg_enable;
1063}
1064EXPORT_SYMBOL_GPL(usbnet_get_msglevel);
1065
1066void usbnet_set_msglevel (struct net_device *net, u32 level)
1067{
1068 struct usbnet *dev = netdev_priv(net);
1069
1070 dev->msg_enable = level;
1071}
1072EXPORT_SYMBOL_GPL(usbnet_set_msglevel);
1073
1074/* drivers may override default ethtool_ops in their bind() routine */
1075static const struct ethtool_ops usbnet_ethtool_ops = {
1076 .get_link = usbnet_get_link,
1077 .nway_reset = usbnet_nway_reset,
1078 .get_drvinfo = usbnet_get_drvinfo,
1079 .get_msglevel = usbnet_get_msglevel,
1080 .set_msglevel = usbnet_set_msglevel,
1081 .get_ts_info = ethtool_op_get_ts_info,
1082 .get_link_ksettings = usbnet_get_link_ksettings_mii,
1083 .set_link_ksettings = usbnet_set_link_ksettings_mii,
1084};
1085
1086/*-------------------------------------------------------------------------*/
1087
1088static void __handle_link_change(struct usbnet *dev)
1089{
1090 if (!test_bit(EVENT_DEV_OPEN, &dev->flags))
1091 return;
1092
1093 if (!netif_carrier_ok(dev->net)) {
1094 /* kill URBs for reading packets to save bus bandwidth */
1095 unlink_urbs(dev, &dev->rxq);
1096
1097 /*
1098 * tx_timeout will unlink URBs for sending packets and
1099 * tx queue is stopped by netcore after link becomes off
1100 */
1101 } else {
1102 /* submitting URBs for reading packets */
1103 tasklet_schedule(&dev->bh);
1104 }
1105
1106 /* hard_mtu or rx_urb_size may change during link change */
1107 usbnet_update_max_qlen(dev);
1108
1109 clear_bit(EVENT_LINK_CHANGE, &dev->flags);
1110}
1111
1112void usbnet_set_rx_mode(struct net_device *net)
1113{
1114 struct usbnet *dev = netdev_priv(net);
1115
1116 usbnet_defer_kevent(dev, EVENT_SET_RX_MODE);
1117}
1118EXPORT_SYMBOL_GPL(usbnet_set_rx_mode);
1119
1120static void __handle_set_rx_mode(struct usbnet *dev)
1121{
1122 if (dev->driver_info->set_rx_mode)
1123 (dev->driver_info->set_rx_mode)(dev);
1124
1125 clear_bit(EVENT_SET_RX_MODE, &dev->flags);
1126}
1127
1128/* work that cannot be done in interrupt context uses keventd.
1129 *
1130 * NOTE: with 2.5 we could do more of this using completion callbacks,
1131 * especially now that control transfers can be queued.
1132 */
1133static void
1134usbnet_deferred_kevent (struct work_struct *work)
1135{
1136 struct usbnet *dev =
1137 container_of(work, struct usbnet, kevent);
1138 int status;
1139
1140 /* usb_clear_halt() needs a thread context */
1141 if (test_bit (EVENT_TX_HALT, &dev->flags)) {
1142 unlink_urbs (dev, &dev->txq);
1143 status = usb_autopm_get_interface(dev->intf);
1144 if (status < 0)
1145 goto fail_pipe;
1146 status = usb_clear_halt (dev->udev, dev->out);
1147 usb_autopm_put_interface(dev->intf);
1148 if (status < 0 &&
1149 status != -EPIPE &&
1150 status != -ESHUTDOWN) {
1151 if (netif_msg_tx_err (dev))
1152fail_pipe:
1153 netdev_err(dev->net, "can't clear tx halt, status %d\n",
1154 status);
1155 } else {
1156 clear_bit (EVENT_TX_HALT, &dev->flags);
1157 if (status != -ESHUTDOWN)
1158 netif_wake_queue (dev->net);
1159 }
1160 }
1161 if (test_bit (EVENT_RX_HALT, &dev->flags)) {
1162 unlink_urbs (dev, &dev->rxq);
1163 status = usb_autopm_get_interface(dev->intf);
1164 if (status < 0)
1165 goto fail_halt;
1166 status = usb_clear_halt (dev->udev, dev->in);
1167 usb_autopm_put_interface(dev->intf);
1168 if (status < 0 &&
1169 status != -EPIPE &&
1170 status != -ESHUTDOWN) {
1171 if (netif_msg_rx_err (dev))
1172fail_halt:
1173 netdev_err(dev->net, "can't clear rx halt, status %d\n",
1174 status);
1175 } else {
1176 clear_bit (EVENT_RX_HALT, &dev->flags);
1177 tasklet_schedule (&dev->bh);
1178 }
1179 }
1180
1181 /* tasklet could resubmit itself forever if memory is tight */
1182 if (test_bit (EVENT_RX_MEMORY, &dev->flags)) {
1183 struct urb *urb = NULL;
1184 int resched = 1;
1185
1186 if (netif_running (dev->net))
1187 urb = usb_alloc_urb (0, GFP_KERNEL);
1188 else
1189 clear_bit (EVENT_RX_MEMORY, &dev->flags);
1190 if (urb != NULL) {
1191 clear_bit (EVENT_RX_MEMORY, &dev->flags);
1192 status = usb_autopm_get_interface(dev->intf);
1193 if (status < 0) {
1194 usb_free_urb(urb);
1195 goto fail_lowmem;
1196 }
1197 if (rx_submit (dev, urb, GFP_KERNEL) == -ENOLINK)
1198 resched = 0;
1199 usb_autopm_put_interface(dev->intf);
1200fail_lowmem:
1201 if (resched)
1202 tasklet_schedule (&dev->bh);
1203 }
1204 }
1205
1206 if (test_bit (EVENT_LINK_RESET, &dev->flags)) {
1207 const struct driver_info *info = dev->driver_info;
1208 int retval = 0;
1209
1210 clear_bit (EVENT_LINK_RESET, &dev->flags);
1211 status = usb_autopm_get_interface(dev->intf);
1212 if (status < 0)
1213 goto skip_reset;
1214 if(info->link_reset && (retval = info->link_reset(dev)) < 0) {
1215 usb_autopm_put_interface(dev->intf);
1216skip_reset:
1217 netdev_info(dev->net, "link reset failed (%d) usbnet usb-%s-%s, %s\n",
1218 retval,
1219 dev->udev->bus->bus_name,
1220 dev->udev->devpath,
1221 info->description);
1222 } else {
1223 usb_autopm_put_interface(dev->intf);
1224 }
1225
1226 /* handle link change from link resetting */
1227 __handle_link_change(dev);
1228 }
1229
1230 if (test_bit (EVENT_LINK_CHANGE, &dev->flags))
1231 __handle_link_change(dev);
1232
1233 if (test_bit (EVENT_SET_RX_MODE, &dev->flags))
1234 __handle_set_rx_mode(dev);
1235
1236
1237 if (dev->flags)
1238 netdev_dbg(dev->net, "kevent done, flags = 0x%lx\n", dev->flags);
1239}
1240
1241/*-------------------------------------------------------------------------*/
1242
1243static void tx_complete (struct urb *urb)
1244{
1245 struct sk_buff *skb = (struct sk_buff *) urb->context;
1246 struct skb_data *entry = (struct skb_data *) skb->cb;
1247 struct usbnet *dev = entry->dev;
1248
1249 if (urb->status == 0) {
1250 struct pcpu_sw_netstats *stats64 = this_cpu_ptr(dev->net->tstats);
1251 unsigned long flags;
1252
1253 flags = u64_stats_update_begin_irqsave(&stats64->syncp);
1254 u64_stats_add(&stats64->tx_packets, entry->packets);
1255 u64_stats_add(&stats64->tx_bytes, entry->length);
1256 u64_stats_update_end_irqrestore(&stats64->syncp, flags);
1257 } else {
1258 dev->net->stats.tx_errors++;
1259
1260 switch (urb->status) {
1261 case -EPIPE:
1262 usbnet_defer_kevent (dev, EVENT_TX_HALT);
1263 break;
1264
1265 /* software-driven interface shutdown */
1266 case -ECONNRESET: // async unlink
1267 case -ESHUTDOWN: // hardware gone
1268 break;
1269
1270 /* like rx, tx gets controller i/o faults during hub_wq
1271 * delays and so it uses the same throttling mechanism.
1272 */
1273 case -EPROTO:
1274 case -ETIME:
1275 case -EILSEQ:
1276 usb_mark_last_busy(dev->udev);
1277 if (!timer_pending (&dev->delay)) {
1278 mod_timer (&dev->delay,
1279 jiffies + THROTTLE_JIFFIES);
1280 netif_dbg(dev, link, dev->net,
1281 "tx throttle %d\n", urb->status);
1282 }
1283 netif_stop_queue (dev->net);
1284 break;
1285 default:
1286 netif_dbg(dev, tx_err, dev->net,
1287 "tx err %d\n", entry->urb->status);
1288 break;
1289 }
1290 }
1291
1292 usb_autopm_put_interface_async(dev->intf);
1293 (void) defer_bh(dev, skb, &dev->txq, tx_done);
1294}
1295
1296/*-------------------------------------------------------------------------*/
1297
1298void usbnet_tx_timeout (struct net_device *net, unsigned int txqueue)
1299{
1300 struct usbnet *dev = netdev_priv(net);
1301
1302 unlink_urbs (dev, &dev->txq);
1303 tasklet_schedule (&dev->bh);
1304 /* this needs to be handled individually because the generic layer
1305 * doesn't know what is sufficient and could not restore private
1306 * information if a remedy of an unconditional reset were used.
1307 */
1308 if (dev->driver_info->recover)
1309 (dev->driver_info->recover)(dev);
1310}
1311EXPORT_SYMBOL_GPL(usbnet_tx_timeout);
1312
1313/*-------------------------------------------------------------------------*/
1314
1315static int build_dma_sg(const struct sk_buff *skb, struct urb *urb)
1316{
1317 unsigned num_sgs, total_len = 0;
1318 int i, s = 0;
1319
1320 num_sgs = skb_shinfo(skb)->nr_frags + 1;
1321 if (num_sgs == 1)
1322 return 0;
1323
1324 /* reserve one for zero packet */
1325 urb->sg = kmalloc_array(num_sgs + 1, sizeof(struct scatterlist),
1326 GFP_ATOMIC);
1327 if (!urb->sg)
1328 return -ENOMEM;
1329
1330 urb->num_sgs = num_sgs;
1331 sg_init_table(urb->sg, urb->num_sgs + 1);
1332
1333 sg_set_buf(&urb->sg[s++], skb->data, skb_headlen(skb));
1334 total_len += skb_headlen(skb);
1335
1336 for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
1337 skb_frag_t *f = &skb_shinfo(skb)->frags[i];
1338
1339 total_len += skb_frag_size(f);
1340 sg_set_page(&urb->sg[i + s], skb_frag_page(f), skb_frag_size(f),
1341 skb_frag_off(f));
1342 }
1343 urb->transfer_buffer_length = total_len;
1344
1345 return 1;
1346}
1347
1348netdev_tx_t usbnet_start_xmit (struct sk_buff *skb,
1349 struct net_device *net)
1350{
1351 struct usbnet *dev = netdev_priv(net);
1352 unsigned int length;
1353 struct urb *urb = NULL;
1354 struct skb_data *entry;
1355 const struct driver_info *info = dev->driver_info;
1356 unsigned long flags;
1357 int retval;
1358
1359 if (skb)
1360 skb_tx_timestamp(skb);
1361
1362 // some devices want funky USB-level framing, for
1363 // win32 driver (usually) and/or hardware quirks
1364 if (info->tx_fixup) {
1365 skb = info->tx_fixup (dev, skb, GFP_ATOMIC);
1366 if (!skb) {
1367 /* packet collected; minidriver waiting for more */
1368 if (info->flags & FLAG_MULTI_PACKET)
1369 goto not_drop;
1370 netif_dbg(dev, tx_err, dev->net, "can't tx_fixup skb\n");
1371 goto drop;
1372 }
1373 }
1374
1375 if (!(urb = usb_alloc_urb (0, GFP_ATOMIC))) {
1376 netif_dbg(dev, tx_err, dev->net, "no urb\n");
1377 goto drop;
1378 }
1379
1380 entry = (struct skb_data *) skb->cb;
1381 entry->urb = urb;
1382 entry->dev = dev;
1383
1384 usb_fill_bulk_urb (urb, dev->udev, dev->out,
1385 skb->data, skb->len, tx_complete, skb);
1386 if (dev->can_dma_sg) {
1387 if (build_dma_sg(skb, urb) < 0)
1388 goto drop;
1389 }
1390 length = urb->transfer_buffer_length;
1391
1392 /* don't assume the hardware handles USB_ZERO_PACKET
1393 * NOTE: strictly conforming cdc-ether devices should expect
1394 * the ZLP here, but ignore the one-byte packet.
1395 * NOTE2: CDC NCM specification is different from CDC ECM when
1396 * handling ZLP/short packets, so cdc_ncm driver will make short
1397 * packet itself if needed.
1398 */
1399 if (length % dev->maxpacket == 0) {
1400 if (!(info->flags & FLAG_SEND_ZLP)) {
1401 if (!(info->flags & FLAG_MULTI_PACKET)) {
1402 length++;
1403 if (skb_tailroom(skb) && !urb->num_sgs) {
1404 skb->data[skb->len] = 0;
1405 __skb_put(skb, 1);
1406 } else if (urb->num_sgs)
1407 sg_set_buf(&urb->sg[urb->num_sgs++],
1408 dev->padding_pkt, 1);
1409 }
1410 } else
1411 urb->transfer_flags |= URB_ZERO_PACKET;
1412 }
1413 urb->transfer_buffer_length = length;
1414
1415 if (info->flags & FLAG_MULTI_PACKET) {
1416 /* Driver has set number of packets and a length delta.
1417 * Calculate the complete length and ensure that it's
1418 * positive.
1419 */
1420 entry->length += length;
1421 if (WARN_ON_ONCE(entry->length <= 0))
1422 entry->length = length;
1423 } else {
1424 usbnet_set_skb_tx_stats(skb, 1, length);
1425 }
1426
1427 spin_lock_irqsave(&dev->txq.lock, flags);
1428 retval = usb_autopm_get_interface_async(dev->intf);
1429 if (retval < 0) {
1430 spin_unlock_irqrestore(&dev->txq.lock, flags);
1431 goto drop;
1432 }
1433 if (netif_queue_stopped(net)) {
1434 usb_autopm_put_interface_async(dev->intf);
1435 spin_unlock_irqrestore(&dev->txq.lock, flags);
1436 goto drop;
1437 }
1438
1439#ifdef CONFIG_PM
1440 /* if this triggers the device is still a sleep */
1441 if (test_bit(EVENT_DEV_ASLEEP, &dev->flags)) {
1442 /* transmission will be done in resume */
1443 usb_anchor_urb(urb, &dev->deferred);
1444 /* no use to process more packets */
1445 netif_stop_queue(net);
1446 usb_put_urb(urb);
1447 spin_unlock_irqrestore(&dev->txq.lock, flags);
1448 netdev_dbg(dev->net, "Delaying transmission for resumption\n");
1449 goto deferred;
1450 }
1451#endif
1452
1453 switch ((retval = usb_submit_urb (urb, GFP_ATOMIC))) {
1454 case -EPIPE:
1455 netif_stop_queue (net);
1456 usbnet_defer_kevent (dev, EVENT_TX_HALT);
1457 usb_autopm_put_interface_async(dev->intf);
1458 break;
1459 default:
1460 usb_autopm_put_interface_async(dev->intf);
1461 netif_dbg(dev, tx_err, dev->net,
1462 "tx: submit urb err %d\n", retval);
1463 break;
1464 case 0:
1465 netif_trans_update(net);
1466 __usbnet_queue_skb(&dev->txq, skb, tx_start);
1467 if (dev->txq.qlen >= TX_QLEN (dev))
1468 netif_stop_queue (net);
1469 }
1470 spin_unlock_irqrestore (&dev->txq.lock, flags);
1471
1472 if (retval) {
1473 netif_dbg(dev, tx_err, dev->net, "drop, code %d\n", retval);
1474drop:
1475 dev->net->stats.tx_dropped++;
1476not_drop:
1477 if (skb)
1478 dev_kfree_skb_any (skb);
1479 if (urb) {
1480 kfree(urb->sg);
1481 usb_free_urb(urb);
1482 }
1483 } else
1484 netif_dbg(dev, tx_queued, dev->net,
1485 "> tx, len %u, type 0x%x\n", length, skb->protocol);
1486#ifdef CONFIG_PM
1487deferred:
1488#endif
1489 return NETDEV_TX_OK;
1490}
1491EXPORT_SYMBOL_GPL(usbnet_start_xmit);
1492
1493static int rx_alloc_submit(struct usbnet *dev, gfp_t flags)
1494{
1495 struct urb *urb;
1496 int i;
1497 int ret = 0;
1498
1499 /* don't refill the queue all at once */
1500 for (i = 0; i < 10 && dev->rxq.qlen < RX_QLEN(dev); i++) {
1501 urb = usb_alloc_urb(0, flags);
1502 if (urb != NULL) {
1503 ret = rx_submit(dev, urb, flags);
1504 if (ret)
1505 goto err;
1506 } else {
1507 ret = -ENOMEM;
1508 goto err;
1509 }
1510 }
1511err:
1512 return ret;
1513}
1514
1515static inline void usb_free_skb(struct sk_buff *skb)
1516{
1517 struct skb_data *entry = (struct skb_data *)skb->cb;
1518
1519 usb_free_urb(entry->urb);
1520 dev_kfree_skb(skb);
1521}
1522
1523/*-------------------------------------------------------------------------*/
1524
1525// tasklet (work deferred from completions, in_irq) or timer
1526
1527static void usbnet_bh (struct timer_list *t)
1528{
1529 struct usbnet *dev = from_timer(dev, t, delay);
1530 struct sk_buff *skb;
1531 struct skb_data *entry;
1532
1533 while ((skb = skb_dequeue (&dev->done))) {
1534 entry = (struct skb_data *) skb->cb;
1535 switch (entry->state) {
1536 case rx_done:
1537 if (rx_process(dev, skb))
1538 usb_free_skb(skb);
1539 continue;
1540 case tx_done:
1541 kfree(entry->urb->sg);
1542 fallthrough;
1543 case rx_cleanup:
1544 usb_free_skb(skb);
1545 continue;
1546 default:
1547 netdev_dbg(dev->net, "bogus skb state %d\n", entry->state);
1548 }
1549 }
1550
1551 /* restart RX again after disabling due to high error rate */
1552 clear_bit(EVENT_RX_KILL, &dev->flags);
1553
1554 /* waiting for all pending urbs to complete?
1555 * only then can we forgo submitting anew
1556 */
1557 if (waitqueue_active(&dev->wait)) {
1558 if (dev->txq.qlen + dev->rxq.qlen + dev->done.qlen == 0)
1559 wake_up_all(&dev->wait);
1560
1561 // or are we maybe short a few urbs?
1562 } else if (netif_running (dev->net) &&
1563 netif_device_present (dev->net) &&
1564 netif_carrier_ok(dev->net) &&
1565 !timer_pending(&dev->delay) &&
1566 !test_bit(EVENT_RX_PAUSED, &dev->flags) &&
1567 !test_bit(EVENT_RX_HALT, &dev->flags)) {
1568 int temp = dev->rxq.qlen;
1569
1570 if (temp < RX_QLEN(dev)) {
1571 if (rx_alloc_submit(dev, GFP_ATOMIC) == -ENOLINK)
1572 return;
1573 if (temp != dev->rxq.qlen)
1574 netif_dbg(dev, link, dev->net,
1575 "rxqlen %d --> %d\n",
1576 temp, dev->rxq.qlen);
1577 if (dev->rxq.qlen < RX_QLEN(dev))
1578 tasklet_schedule (&dev->bh);
1579 }
1580 if (dev->txq.qlen < TX_QLEN (dev))
1581 netif_wake_queue (dev->net);
1582 }
1583}
1584
1585static void usbnet_bh_tasklet(struct tasklet_struct *t)
1586{
1587 struct usbnet *dev = from_tasklet(dev, t, bh);
1588
1589 usbnet_bh(&dev->delay);
1590}
1591
1592
1593/*-------------------------------------------------------------------------
1594 *
1595 * USB Device Driver support
1596 *
1597 *-------------------------------------------------------------------------*/
1598
1599// precondition: never called in_interrupt
1600
1601void usbnet_disconnect (struct usb_interface *intf)
1602{
1603 struct usbnet *dev;
1604 struct usb_device *xdev;
1605 struct net_device *net;
1606 struct urb *urb;
1607
1608 dev = usb_get_intfdata(intf);
1609 usb_set_intfdata(intf, NULL);
1610 if (!dev)
1611 return;
1612
1613 xdev = interface_to_usbdev (intf);
1614
1615 netif_info(dev, probe, dev->net, "unregister '%s' usb-%s-%s, %s\n",
1616 intf->dev.driver->name,
1617 xdev->bus->bus_name, xdev->devpath,
1618 dev->driver_info->description);
1619
1620 net = dev->net;
1621 unregister_netdev (net);
1622
1623 while ((urb = usb_get_from_anchor(&dev->deferred))) {
1624 dev_kfree_skb(urb->context);
1625 kfree(urb->sg);
1626 usb_free_urb(urb);
1627 }
1628
1629 if (dev->driver_info->unbind)
1630 dev->driver_info->unbind(dev, intf);
1631
1632 usb_kill_urb(dev->interrupt);
1633 usb_free_urb(dev->interrupt);
1634 kfree(dev->padding_pkt);
1635
1636 free_percpu(net->tstats);
1637 free_netdev(net);
1638}
1639EXPORT_SYMBOL_GPL(usbnet_disconnect);
1640
1641static const struct net_device_ops usbnet_netdev_ops = {
1642 .ndo_open = usbnet_open,
1643 .ndo_stop = usbnet_stop,
1644 .ndo_start_xmit = usbnet_start_xmit,
1645 .ndo_tx_timeout = usbnet_tx_timeout,
1646 .ndo_set_rx_mode = usbnet_set_rx_mode,
1647 .ndo_change_mtu = usbnet_change_mtu,
1648 .ndo_get_stats64 = dev_get_tstats64,
1649 .ndo_set_mac_address = eth_mac_addr,
1650 .ndo_validate_addr = eth_validate_addr,
1651};
1652
1653/*-------------------------------------------------------------------------*/
1654
1655// precondition: never called in_interrupt
1656
1657static struct device_type wlan_type = {
1658 .name = "wlan",
1659};
1660
1661static struct device_type wwan_type = {
1662 .name = "wwan",
1663};
1664
1665int
1666usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod)
1667{
1668 struct usbnet *dev;
1669 struct net_device *net;
1670 struct usb_host_interface *interface;
1671 const struct driver_info *info;
1672 struct usb_device *xdev;
1673 int status;
1674 const char *name;
1675 struct usb_driver *driver = to_usb_driver(udev->dev.driver);
1676
1677 /* usbnet already took usb runtime pm, so have to enable the feature
1678 * for usb interface, otherwise usb_autopm_get_interface may return
1679 * failure if RUNTIME_PM is enabled.
1680 */
1681 if (!driver->supports_autosuspend) {
1682 driver->supports_autosuspend = 1;
1683 pm_runtime_enable(&udev->dev);
1684 }
1685
1686 name = udev->dev.driver->name;
1687 info = (const struct driver_info *) prod->driver_info;
1688 if (!info) {
1689 dev_dbg (&udev->dev, "blacklisted by %s\n", name);
1690 return -ENODEV;
1691 }
1692 xdev = interface_to_usbdev (udev);
1693 interface = udev->cur_altsetting;
1694
1695 status = -ENOMEM;
1696
1697 // set up our own records
1698 net = alloc_etherdev(sizeof(*dev));
1699 if (!net)
1700 goto out;
1701
1702 /* netdev_printk() needs this so do it as early as possible */
1703 SET_NETDEV_DEV(net, &udev->dev);
1704
1705 dev = netdev_priv(net);
1706 dev->udev = xdev;
1707 dev->intf = udev;
1708 dev->driver_info = info;
1709 dev->driver_name = name;
1710 dev->rx_speed = SPEED_UNSET;
1711 dev->tx_speed = SPEED_UNSET;
1712
1713 net->tstats = netdev_alloc_pcpu_stats(struct pcpu_sw_netstats);
1714 if (!net->tstats)
1715 goto out0;
1716
1717 dev->msg_enable = netif_msg_init (msg_level, NETIF_MSG_DRV
1718 | NETIF_MSG_PROBE | NETIF_MSG_LINK);
1719 init_waitqueue_head(&dev->wait);
1720 skb_queue_head_init (&dev->rxq);
1721 skb_queue_head_init (&dev->txq);
1722 skb_queue_head_init (&dev->done);
1723 skb_queue_head_init(&dev->rxq_pause);
1724 tasklet_setup(&dev->bh, usbnet_bh_tasklet);
1725 INIT_WORK (&dev->kevent, usbnet_deferred_kevent);
1726 init_usb_anchor(&dev->deferred);
1727 timer_setup(&dev->delay, usbnet_bh, 0);
1728 mutex_init (&dev->phy_mutex);
1729 mutex_init(&dev->interrupt_mutex);
1730 dev->interrupt_count = 0;
1731
1732 dev->net = net;
1733 strscpy(net->name, "usb%d", sizeof(net->name));
1734 eth_hw_addr_set(net, node_id);
1735
1736 /* rx and tx sides can use different message sizes;
1737 * bind() should set rx_urb_size in that case.
1738 */
1739 dev->hard_mtu = net->mtu + net->hard_header_len;
1740 net->min_mtu = 0;
1741 net->max_mtu = ETH_MAX_MTU;
1742
1743 net->netdev_ops = &usbnet_netdev_ops;
1744 net->watchdog_timeo = TX_TIMEOUT_JIFFIES;
1745 net->ethtool_ops = &usbnet_ethtool_ops;
1746
1747 // allow device-specific bind/init procedures
1748 // NOTE net->name still not usable ...
1749 if (info->bind) {
1750 status = info->bind (dev, udev);
1751 if (status < 0)
1752 goto out1;
1753
1754 // heuristic: "usb%d" for links we know are two-host,
1755 // else "eth%d" when there's reasonable doubt. userspace
1756 // can rename the link if it knows better.
1757 if ((dev->driver_info->flags & FLAG_ETHER) != 0 &&
1758 ((dev->driver_info->flags & FLAG_POINTTOPOINT) == 0 ||
1759 (net->dev_addr [0] & 0x02) == 0))
1760 strscpy(net->name, "eth%d", sizeof(net->name));
1761 /* WLAN devices should always be named "wlan%d" */
1762 if ((dev->driver_info->flags & FLAG_WLAN) != 0)
1763 strscpy(net->name, "wlan%d", sizeof(net->name));
1764 /* WWAN devices should always be named "wwan%d" */
1765 if ((dev->driver_info->flags & FLAG_WWAN) != 0)
1766 strscpy(net->name, "wwan%d", sizeof(net->name));
1767
1768 /* devices that cannot do ARP */
1769 if ((dev->driver_info->flags & FLAG_NOARP) != 0)
1770 net->flags |= IFF_NOARP;
1771
1772 /* maybe the remote can't receive an Ethernet MTU */
1773 if (net->mtu > (dev->hard_mtu - net->hard_header_len))
1774 net->mtu = dev->hard_mtu - net->hard_header_len;
1775 } else if (!info->in || !info->out)
1776 status = usbnet_get_endpoints (dev, udev);
1777 else {
1778 u8 ep_addrs[3] = {
1779 info->in + USB_DIR_IN, info->out + USB_DIR_OUT, 0
1780 };
1781
1782 dev->in = usb_rcvbulkpipe (xdev, info->in);
1783 dev->out = usb_sndbulkpipe (xdev, info->out);
1784 if (!(info->flags & FLAG_NO_SETINT))
1785 status = usb_set_interface (xdev,
1786 interface->desc.bInterfaceNumber,
1787 interface->desc.bAlternateSetting);
1788 else
1789 status = 0;
1790
1791 if (status == 0 && !usb_check_bulk_endpoints(udev, ep_addrs))
1792 status = -EINVAL;
1793 }
1794 if (status >= 0 && dev->status)
1795 status = init_status (dev, udev);
1796 if (status < 0)
1797 goto out3;
1798
1799 if (!dev->rx_urb_size)
1800 dev->rx_urb_size = dev->hard_mtu;
1801 dev->maxpacket = usb_maxpacket(dev->udev, dev->out);
1802 if (dev->maxpacket == 0) {
1803 /* that is a broken device */
1804 status = -ENODEV;
1805 goto out4;
1806 }
1807
1808 /* let userspace know we have a random address */
1809 if (ether_addr_equal(net->dev_addr, node_id))
1810 net->addr_assign_type = NET_ADDR_RANDOM;
1811
1812 if ((dev->driver_info->flags & FLAG_WLAN) != 0)
1813 SET_NETDEV_DEVTYPE(net, &wlan_type);
1814 if ((dev->driver_info->flags & FLAG_WWAN) != 0)
1815 SET_NETDEV_DEVTYPE(net, &wwan_type);
1816
1817 /* initialize max rx_qlen and tx_qlen */
1818 usbnet_update_max_qlen(dev);
1819
1820 if (dev->can_dma_sg && !(info->flags & FLAG_SEND_ZLP) &&
1821 !(info->flags & FLAG_MULTI_PACKET)) {
1822 dev->padding_pkt = kzalloc(1, GFP_KERNEL);
1823 if (!dev->padding_pkt) {
1824 status = -ENOMEM;
1825 goto out4;
1826 }
1827 }
1828
1829 status = register_netdev (net);
1830 if (status)
1831 goto out5;
1832 netif_info(dev, probe, dev->net,
1833 "register '%s' at usb-%s-%s, %s, %pM\n",
1834 udev->dev.driver->name,
1835 xdev->bus->bus_name, xdev->devpath,
1836 dev->driver_info->description,
1837 net->dev_addr);
1838
1839 // ok, it's ready to go.
1840 usb_set_intfdata (udev, dev);
1841
1842 netif_device_attach (net);
1843
1844 if (dev->driver_info->flags & FLAG_LINK_INTR)
1845 usbnet_link_change(dev, 0, 0);
1846
1847 return 0;
1848
1849out5:
1850 kfree(dev->padding_pkt);
1851out4:
1852 usb_free_urb(dev->interrupt);
1853out3:
1854 if (info->unbind)
1855 info->unbind (dev, udev);
1856out1:
1857 /* subdrivers must undo all they did in bind() if they
1858 * fail it, but we may fail later and a deferred kevent
1859 * may trigger an error resubmitting itself and, worse,
1860 * schedule a timer. So we kill it all just in case.
1861 */
1862 cancel_work_sync(&dev->kevent);
1863 del_timer_sync(&dev->delay);
1864 free_percpu(net->tstats);
1865out0:
1866 free_netdev(net);
1867out:
1868 return status;
1869}
1870EXPORT_SYMBOL_GPL(usbnet_probe);
1871
1872/*-------------------------------------------------------------------------*/
1873
1874/*
1875 * suspend the whole driver as soon as the first interface is suspended
1876 * resume only when the last interface is resumed
1877 */
1878
1879int usbnet_suspend (struct usb_interface *intf, pm_message_t message)
1880{
1881 struct usbnet *dev = usb_get_intfdata(intf);
1882
1883 if (!dev->suspend_count++) {
1884 spin_lock_irq(&dev->txq.lock);
1885 /* don't autosuspend while transmitting */
1886 if (dev->txq.qlen && PMSG_IS_AUTO(message)) {
1887 dev->suspend_count--;
1888 spin_unlock_irq(&dev->txq.lock);
1889 return -EBUSY;
1890 } else {
1891 set_bit(EVENT_DEV_ASLEEP, &dev->flags);
1892 spin_unlock_irq(&dev->txq.lock);
1893 }
1894 /*
1895 * accelerate emptying of the rx and queues, to avoid
1896 * having everything error out.
1897 */
1898 netif_device_detach (dev->net);
1899 usbnet_terminate_urbs(dev);
1900 __usbnet_status_stop_force(dev);
1901
1902 /*
1903 * reattach so runtime management can use and
1904 * wake the device
1905 */
1906 netif_device_attach (dev->net);
1907 }
1908 return 0;
1909}
1910EXPORT_SYMBOL_GPL(usbnet_suspend);
1911
1912int usbnet_resume (struct usb_interface *intf)
1913{
1914 struct usbnet *dev = usb_get_intfdata(intf);
1915 struct sk_buff *skb;
1916 struct urb *res;
1917 int retval;
1918
1919 if (!--dev->suspend_count) {
1920 /* resume interrupt URB if it was previously submitted */
1921 __usbnet_status_start_force(dev, GFP_NOIO);
1922
1923 spin_lock_irq(&dev->txq.lock);
1924 while ((res = usb_get_from_anchor(&dev->deferred))) {
1925
1926 skb = (struct sk_buff *)res->context;
1927 retval = usb_submit_urb(res, GFP_ATOMIC);
1928 if (retval < 0) {
1929 dev_kfree_skb_any(skb);
1930 kfree(res->sg);
1931 usb_free_urb(res);
1932 usb_autopm_put_interface_async(dev->intf);
1933 } else {
1934 netif_trans_update(dev->net);
1935 __skb_queue_tail(&dev->txq, skb);
1936 }
1937 }
1938
1939 smp_mb();
1940 clear_bit(EVENT_DEV_ASLEEP, &dev->flags);
1941 spin_unlock_irq(&dev->txq.lock);
1942
1943 if (test_bit(EVENT_DEV_OPEN, &dev->flags)) {
1944 /* handle remote wakeup ASAP
1945 * we cannot race against stop
1946 */
1947 if (netif_device_present(dev->net) &&
1948 !timer_pending(&dev->delay) &&
1949 !test_bit(EVENT_RX_HALT, &dev->flags))
1950 rx_alloc_submit(dev, GFP_NOIO);
1951
1952 if (!(dev->txq.qlen >= TX_QLEN(dev)))
1953 netif_tx_wake_all_queues(dev->net);
1954 tasklet_schedule (&dev->bh);
1955 }
1956 }
1957
1958 if (test_and_clear_bit(EVENT_DEVICE_REPORT_IDLE, &dev->flags))
1959 usb_autopm_get_interface_no_resume(intf);
1960
1961 return 0;
1962}
1963EXPORT_SYMBOL_GPL(usbnet_resume);
1964
1965/*
1966 * Either a subdriver implements manage_power, then it is assumed to always
1967 * be ready to be suspended or it reports the readiness to be suspended
1968 * explicitly
1969 */
1970void usbnet_device_suggests_idle(struct usbnet *dev)
1971{
1972 if (!test_and_set_bit(EVENT_DEVICE_REPORT_IDLE, &dev->flags)) {
1973 dev->intf->needs_remote_wakeup = 1;
1974 usb_autopm_put_interface_async(dev->intf);
1975 }
1976}
1977EXPORT_SYMBOL(usbnet_device_suggests_idle);
1978
1979/*
1980 * For devices that can do without special commands
1981 */
1982int usbnet_manage_power(struct usbnet *dev, int on)
1983{
1984 dev->intf->needs_remote_wakeup = on;
1985 return 0;
1986}
1987EXPORT_SYMBOL(usbnet_manage_power);
1988
1989void usbnet_link_change(struct usbnet *dev, bool link, bool need_reset)
1990{
1991 /* update link after link is reseted */
1992 if (link && !need_reset)
1993 netif_carrier_on(dev->net);
1994 else
1995 netif_carrier_off(dev->net);
1996
1997 if (need_reset && link)
1998 usbnet_defer_kevent(dev, EVENT_LINK_RESET);
1999 else
2000 usbnet_defer_kevent(dev, EVENT_LINK_CHANGE);
2001}
2002EXPORT_SYMBOL(usbnet_link_change);
2003
2004/*-------------------------------------------------------------------------*/
2005static int __usbnet_read_cmd(struct usbnet *dev, u8 cmd, u8 reqtype,
2006 u16 value, u16 index, void *data, u16 size)
2007{
2008 void *buf = NULL;
2009 int err = -ENOMEM;
2010
2011 netdev_dbg(dev->net, "usbnet_read_cmd cmd=0x%02x reqtype=%02x"
2012 " value=0x%04x index=0x%04x size=%d\n",
2013 cmd, reqtype, value, index, size);
2014
2015 if (size) {
2016 buf = kmalloc(size, GFP_NOIO);
2017 if (!buf)
2018 goto out;
2019 }
2020
2021 err = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0),
2022 cmd, reqtype, value, index, buf, size,
2023 USB_CTRL_GET_TIMEOUT);
2024 if (err > 0 && err <= size) {
2025 if (data)
2026 memcpy(data, buf, err);
2027 else
2028 netdev_dbg(dev->net,
2029 "Huh? Data requested but thrown away.\n");
2030 }
2031 kfree(buf);
2032out:
2033 return err;
2034}
2035
2036static int __usbnet_write_cmd(struct usbnet *dev, u8 cmd, u8 reqtype,
2037 u16 value, u16 index, const void *data,
2038 u16 size)
2039{
2040 void *buf = NULL;
2041 int err = -ENOMEM;
2042
2043 netdev_dbg(dev->net, "usbnet_write_cmd cmd=0x%02x reqtype=%02x"
2044 " value=0x%04x index=0x%04x size=%d\n",
2045 cmd, reqtype, value, index, size);
2046
2047 if (data) {
2048 buf = kmemdup(data, size, GFP_NOIO);
2049 if (!buf)
2050 goto out;
2051 } else {
2052 if (size) {
2053 WARN_ON_ONCE(1);
2054 err = -EINVAL;
2055 goto out;
2056 }
2057 }
2058
2059 err = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0),
2060 cmd, reqtype, value, index, buf, size,
2061 USB_CTRL_SET_TIMEOUT);
2062 kfree(buf);
2063
2064out:
2065 return err;
2066}
2067
2068/*
2069 * The function can't be called inside suspend/resume callback,
2070 * otherwise deadlock will be caused.
2071 */
2072int usbnet_read_cmd(struct usbnet *dev, u8 cmd, u8 reqtype,
2073 u16 value, u16 index, void *data, u16 size)
2074{
2075 int ret;
2076
2077 if (usb_autopm_get_interface(dev->intf) < 0)
2078 return -ENODEV;
2079 ret = __usbnet_read_cmd(dev, cmd, reqtype, value, index,
2080 data, size);
2081 usb_autopm_put_interface(dev->intf);
2082 return ret;
2083}
2084EXPORT_SYMBOL_GPL(usbnet_read_cmd);
2085
2086/*
2087 * The function can't be called inside suspend/resume callback,
2088 * otherwise deadlock will be caused.
2089 */
2090int usbnet_write_cmd(struct usbnet *dev, u8 cmd, u8 reqtype,
2091 u16 value, u16 index, const void *data, u16 size)
2092{
2093 int ret;
2094
2095 if (usb_autopm_get_interface(dev->intf) < 0)
2096 return -ENODEV;
2097 ret = __usbnet_write_cmd(dev, cmd, reqtype, value, index,
2098 data, size);
2099 usb_autopm_put_interface(dev->intf);
2100 return ret;
2101}
2102EXPORT_SYMBOL_GPL(usbnet_write_cmd);
2103
2104/*
2105 * The function can be called inside suspend/resume callback safely
2106 * and should only be called by suspend/resume callback generally.
2107 */
2108int usbnet_read_cmd_nopm(struct usbnet *dev, u8 cmd, u8 reqtype,
2109 u16 value, u16 index, void *data, u16 size)
2110{
2111 return __usbnet_read_cmd(dev, cmd, reqtype, value, index,
2112 data, size);
2113}
2114EXPORT_SYMBOL_GPL(usbnet_read_cmd_nopm);
2115
2116/*
2117 * The function can be called inside suspend/resume callback safely
2118 * and should only be called by suspend/resume callback generally.
2119 */
2120int usbnet_write_cmd_nopm(struct usbnet *dev, u8 cmd, u8 reqtype,
2121 u16 value, u16 index, const void *data,
2122 u16 size)
2123{
2124 return __usbnet_write_cmd(dev, cmd, reqtype, value, index,
2125 data, size);
2126}
2127EXPORT_SYMBOL_GPL(usbnet_write_cmd_nopm);
2128
2129static void usbnet_async_cmd_cb(struct urb *urb)
2130{
2131 struct usb_ctrlrequest *req = (struct usb_ctrlrequest *)urb->context;
2132 int status = urb->status;
2133
2134 if (status < 0)
2135 dev_dbg(&urb->dev->dev, "%s failed with %d",
2136 __func__, status);
2137
2138 kfree(req);
2139 usb_free_urb(urb);
2140}
2141
2142/*
2143 * The caller must make sure that device can't be put into suspend
2144 * state until the control URB completes.
2145 */
2146int usbnet_write_cmd_async(struct usbnet *dev, u8 cmd, u8 reqtype,
2147 u16 value, u16 index, const void *data, u16 size)
2148{
2149 struct usb_ctrlrequest *req;
2150 struct urb *urb;
2151 int err = -ENOMEM;
2152 void *buf = NULL;
2153
2154 netdev_dbg(dev->net, "usbnet_write_cmd cmd=0x%02x reqtype=%02x"
2155 " value=0x%04x index=0x%04x size=%d\n",
2156 cmd, reqtype, value, index, size);
2157
2158 urb = usb_alloc_urb(0, GFP_ATOMIC);
2159 if (!urb)
2160 goto fail;
2161
2162 if (data) {
2163 buf = kmemdup(data, size, GFP_ATOMIC);
2164 if (!buf) {
2165 netdev_err(dev->net, "Error allocating buffer"
2166 " in %s!\n", __func__);
2167 goto fail_free_urb;
2168 }
2169 }
2170
2171 req = kmalloc(sizeof(struct usb_ctrlrequest), GFP_ATOMIC);
2172 if (!req)
2173 goto fail_free_buf;
2174
2175 req->bRequestType = reqtype;
2176 req->bRequest = cmd;
2177 req->wValue = cpu_to_le16(value);
2178 req->wIndex = cpu_to_le16(index);
2179 req->wLength = cpu_to_le16(size);
2180
2181 usb_fill_control_urb(urb, dev->udev,
2182 usb_sndctrlpipe(dev->udev, 0),
2183 (void *)req, buf, size,
2184 usbnet_async_cmd_cb, req);
2185 urb->transfer_flags |= URB_FREE_BUFFER;
2186
2187 err = usb_submit_urb(urb, GFP_ATOMIC);
2188 if (err < 0) {
2189 netdev_err(dev->net, "Error submitting the control"
2190 " message: status=%d\n", err);
2191 goto fail_free_all;
2192 }
2193 return 0;
2194
2195fail_free_all:
2196 kfree(req);
2197fail_free_buf:
2198 kfree(buf);
2199 /*
2200 * avoid a double free
2201 * needed because the flag can be set only
2202 * after filling the URB
2203 */
2204 urb->transfer_flags = 0;
2205fail_free_urb:
2206 usb_free_urb(urb);
2207fail:
2208 return err;
2209
2210}
2211EXPORT_SYMBOL_GPL(usbnet_write_cmd_async);
2212/*-------------------------------------------------------------------------*/
2213
2214static int __init usbnet_init(void)
2215{
2216 /* Compiler should optimize this out. */
2217 BUILD_BUG_ON(
2218 sizeof_field(struct sk_buff, cb) < sizeof(struct skb_data));
2219
2220 eth_random_addr(node_id);
2221 return 0;
2222}
2223module_init(usbnet_init);
2224
2225static void __exit usbnet_exit(void)
2226{
2227}
2228module_exit(usbnet_exit);
2229
2230MODULE_AUTHOR("David Brownell");
2231MODULE_DESCRIPTION("USB network driver framework");
2232MODULE_LICENSE("GPL");
1/*
2 * USB Network driver infrastructure
3 * Copyright (C) 2000-2005 by David Brownell
4 * Copyright (C) 2003-2005 David Hollis <dhollis@davehollis.com>
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
10 *
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
15 *
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, see <http://www.gnu.org/licenses/>.
18 */
19
20/*
21 * This is a generic "USB networking" framework that works with several
22 * kinds of full and high speed networking devices: host-to-host cables,
23 * smart usb peripherals, and actual Ethernet adapters.
24 *
25 * These devices usually differ in terms of control protocols (if they
26 * even have one!) and sometimes they define new framing to wrap or batch
27 * Ethernet packets. Otherwise, they talk to USB pretty much the same,
28 * so interface (un)binding, endpoint I/O queues, fault handling, and other
29 * issues can usefully be addressed by this framework.
30 */
31
32// #define DEBUG // error path messages, extra info
33// #define VERBOSE // more; success messages
34
35#include <linux/module.h>
36#include <linux/init.h>
37#include <linux/netdevice.h>
38#include <linux/etherdevice.h>
39#include <linux/ctype.h>
40#include <linux/ethtool.h>
41#include <linux/workqueue.h>
42#include <linux/mii.h>
43#include <linux/usb.h>
44#include <linux/usb/usbnet.h>
45#include <linux/slab.h>
46#include <linux/kernel.h>
47#include <linux/pm_runtime.h>
48
49#define DRIVER_VERSION "22-Aug-2005"
50
51
52/*-------------------------------------------------------------------------*/
53
54/*
55 * Nineteen USB 1.1 max size bulk transactions per frame (ms), max.
56 * Several dozen bytes of IPv4 data can fit in two such transactions.
57 * One maximum size Ethernet packet takes twenty four of them.
58 * For high speed, each frame comfortably fits almost 36 max size
59 * Ethernet packets (so queues should be bigger).
60 *
61 * The goal is to let the USB host controller be busy for 5msec or
62 * more before an irq is required, under load. Jumbograms change
63 * the equation.
64 */
65#define MAX_QUEUE_MEMORY (60 * 1518)
66#define RX_QLEN(dev) ((dev)->rx_qlen)
67#define TX_QLEN(dev) ((dev)->tx_qlen)
68
69// reawaken network queue this soon after stopping; else watchdog barks
70#define TX_TIMEOUT_JIFFIES (5*HZ)
71
72/* throttle rx/tx briefly after some faults, so hub_wq might disconnect()
73 * us (it polls at HZ/4 usually) before we report too many false errors.
74 */
75#define THROTTLE_JIFFIES (HZ/8)
76
77// between wakeups
78#define UNLINK_TIMEOUT_MS 3
79
80/*-------------------------------------------------------------------------*/
81
82// randomly generated ethernet address
83static u8 node_id [ETH_ALEN];
84
85static const char driver_name [] = "usbnet";
86
87/* use ethtool to change the level for any given device */
88static int msg_level = -1;
89module_param (msg_level, int, 0);
90MODULE_PARM_DESC (msg_level, "Override default message level");
91
92/*-------------------------------------------------------------------------*/
93
94/* handles CDC Ethernet and many other network "bulk data" interfaces */
95int usbnet_get_endpoints(struct usbnet *dev, struct usb_interface *intf)
96{
97 int tmp;
98 struct usb_host_interface *alt = NULL;
99 struct usb_host_endpoint *in = NULL, *out = NULL;
100 struct usb_host_endpoint *status = NULL;
101
102 for (tmp = 0; tmp < intf->num_altsetting; tmp++) {
103 unsigned ep;
104
105 in = out = status = NULL;
106 alt = intf->altsetting + tmp;
107
108 /* take the first altsetting with in-bulk + out-bulk;
109 * remember any status endpoint, just in case;
110 * ignore other endpoints and altsettings.
111 */
112 for (ep = 0; ep < alt->desc.bNumEndpoints; ep++) {
113 struct usb_host_endpoint *e;
114 int intr = 0;
115
116 e = alt->endpoint + ep;
117 switch (e->desc.bmAttributes) {
118 case USB_ENDPOINT_XFER_INT:
119 if (!usb_endpoint_dir_in(&e->desc))
120 continue;
121 intr = 1;
122 /* FALLTHROUGH */
123 case USB_ENDPOINT_XFER_BULK:
124 break;
125 default:
126 continue;
127 }
128 if (usb_endpoint_dir_in(&e->desc)) {
129 if (!intr && !in)
130 in = e;
131 else if (intr && !status)
132 status = e;
133 } else {
134 if (!out)
135 out = e;
136 }
137 }
138 if (in && out)
139 break;
140 }
141 if (!alt || !in || !out)
142 return -EINVAL;
143
144 if (alt->desc.bAlternateSetting != 0 ||
145 !(dev->driver_info->flags & FLAG_NO_SETINT)) {
146 tmp = usb_set_interface (dev->udev, alt->desc.bInterfaceNumber,
147 alt->desc.bAlternateSetting);
148 if (tmp < 0)
149 return tmp;
150 }
151
152 dev->in = usb_rcvbulkpipe (dev->udev,
153 in->desc.bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
154 dev->out = usb_sndbulkpipe (dev->udev,
155 out->desc.bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
156 dev->status = status;
157 return 0;
158}
159EXPORT_SYMBOL_GPL(usbnet_get_endpoints);
160
161int usbnet_get_ethernet_addr(struct usbnet *dev, int iMACAddress)
162{
163 int tmp = -1, ret;
164 unsigned char buf [13];
165
166 ret = usb_string(dev->udev, iMACAddress, buf, sizeof buf);
167 if (ret == 12)
168 tmp = hex2bin(dev->net->dev_addr, buf, 6);
169 if (tmp < 0) {
170 dev_dbg(&dev->udev->dev,
171 "bad MAC string %d fetch, %d\n", iMACAddress, tmp);
172 if (ret >= 0)
173 ret = -EINVAL;
174 return ret;
175 }
176 return 0;
177}
178EXPORT_SYMBOL_GPL(usbnet_get_ethernet_addr);
179
180static void intr_complete (struct urb *urb)
181{
182 struct usbnet *dev = urb->context;
183 int status = urb->status;
184
185 switch (status) {
186 /* success */
187 case 0:
188 dev->driver_info->status(dev, urb);
189 break;
190
191 /* software-driven interface shutdown */
192 case -ENOENT: /* urb killed */
193 case -ESHUTDOWN: /* hardware gone */
194 netif_dbg(dev, ifdown, dev->net,
195 "intr shutdown, code %d\n", status);
196 return;
197
198 /* NOTE: not throttling like RX/TX, since this endpoint
199 * already polls infrequently
200 */
201 default:
202 netdev_dbg(dev->net, "intr status %d\n", status);
203 break;
204 }
205
206 status = usb_submit_urb (urb, GFP_ATOMIC);
207 if (status != 0)
208 netif_err(dev, timer, dev->net,
209 "intr resubmit --> %d\n", status);
210}
211
212static int init_status (struct usbnet *dev, struct usb_interface *intf)
213{
214 char *buf = NULL;
215 unsigned pipe = 0;
216 unsigned maxp;
217 unsigned period;
218
219 if (!dev->driver_info->status)
220 return 0;
221
222 pipe = usb_rcvintpipe (dev->udev,
223 dev->status->desc.bEndpointAddress
224 & USB_ENDPOINT_NUMBER_MASK);
225 maxp = usb_maxpacket (dev->udev, pipe, 0);
226
227 /* avoid 1 msec chatter: min 8 msec poll rate */
228 period = max ((int) dev->status->desc.bInterval,
229 (dev->udev->speed == USB_SPEED_HIGH) ? 7 : 3);
230
231 buf = kmalloc (maxp, GFP_KERNEL);
232 if (buf) {
233 dev->interrupt = usb_alloc_urb (0, GFP_KERNEL);
234 if (!dev->interrupt) {
235 kfree (buf);
236 return -ENOMEM;
237 } else {
238 usb_fill_int_urb(dev->interrupt, dev->udev, pipe,
239 buf, maxp, intr_complete, dev, period);
240 dev->interrupt->transfer_flags |= URB_FREE_BUFFER;
241 dev_dbg(&intf->dev,
242 "status ep%din, %d bytes period %d\n",
243 usb_pipeendpoint(pipe), maxp, period);
244 }
245 }
246 return 0;
247}
248
249/* Submit the interrupt URB if not previously submitted, increasing refcount */
250int usbnet_status_start(struct usbnet *dev, gfp_t mem_flags)
251{
252 int ret = 0;
253
254 WARN_ON_ONCE(dev->interrupt == NULL);
255 if (dev->interrupt) {
256 mutex_lock(&dev->interrupt_mutex);
257
258 if (++dev->interrupt_count == 1)
259 ret = usb_submit_urb(dev->interrupt, mem_flags);
260
261 dev_dbg(&dev->udev->dev, "incremented interrupt URB count to %d\n",
262 dev->interrupt_count);
263 mutex_unlock(&dev->interrupt_mutex);
264 }
265 return ret;
266}
267EXPORT_SYMBOL_GPL(usbnet_status_start);
268
269/* For resume; submit interrupt URB if previously submitted */
270static int __usbnet_status_start_force(struct usbnet *dev, gfp_t mem_flags)
271{
272 int ret = 0;
273
274 mutex_lock(&dev->interrupt_mutex);
275 if (dev->interrupt_count) {
276 ret = usb_submit_urb(dev->interrupt, mem_flags);
277 dev_dbg(&dev->udev->dev,
278 "submitted interrupt URB for resume\n");
279 }
280 mutex_unlock(&dev->interrupt_mutex);
281 return ret;
282}
283
284/* Kill the interrupt URB if all submitters want it killed */
285void usbnet_status_stop(struct usbnet *dev)
286{
287 if (dev->interrupt) {
288 mutex_lock(&dev->interrupt_mutex);
289 WARN_ON(dev->interrupt_count == 0);
290
291 if (dev->interrupt_count && --dev->interrupt_count == 0)
292 usb_kill_urb(dev->interrupt);
293
294 dev_dbg(&dev->udev->dev,
295 "decremented interrupt URB count to %d\n",
296 dev->interrupt_count);
297 mutex_unlock(&dev->interrupt_mutex);
298 }
299}
300EXPORT_SYMBOL_GPL(usbnet_status_stop);
301
302/* For suspend; always kill interrupt URB */
303static void __usbnet_status_stop_force(struct usbnet *dev)
304{
305 if (dev->interrupt) {
306 mutex_lock(&dev->interrupt_mutex);
307 usb_kill_urb(dev->interrupt);
308 dev_dbg(&dev->udev->dev, "killed interrupt URB for suspend\n");
309 mutex_unlock(&dev->interrupt_mutex);
310 }
311}
312
313/* Passes this packet up the stack, updating its accounting.
314 * Some link protocols batch packets, so their rx_fixup paths
315 * can return clones as well as just modify the original skb.
316 */
317void usbnet_skb_return (struct usbnet *dev, struct sk_buff *skb)
318{
319 int status;
320
321 if (test_bit(EVENT_RX_PAUSED, &dev->flags)) {
322 skb_queue_tail(&dev->rxq_pause, skb);
323 return;
324 }
325
326 /* only update if unset to allow minidriver rx_fixup override */
327 if (skb->protocol == 0)
328 skb->protocol = eth_type_trans (skb, dev->net);
329
330 dev->net->stats.rx_packets++;
331 dev->net->stats.rx_bytes += skb->len;
332
333 netif_dbg(dev, rx_status, dev->net, "< rx, len %zu, type 0x%x\n",
334 skb->len + sizeof (struct ethhdr), skb->protocol);
335 memset (skb->cb, 0, sizeof (struct skb_data));
336
337 if (skb_defer_rx_timestamp(skb))
338 return;
339
340 status = netif_rx (skb);
341 if (status != NET_RX_SUCCESS)
342 netif_dbg(dev, rx_err, dev->net,
343 "netif_rx status %d\n", status);
344}
345EXPORT_SYMBOL_GPL(usbnet_skb_return);
346
347/* must be called if hard_mtu or rx_urb_size changed */
348void usbnet_update_max_qlen(struct usbnet *dev)
349{
350 enum usb_device_speed speed = dev->udev->speed;
351
352 switch (speed) {
353 case USB_SPEED_HIGH:
354 dev->rx_qlen = MAX_QUEUE_MEMORY / dev->rx_urb_size;
355 dev->tx_qlen = MAX_QUEUE_MEMORY / dev->hard_mtu;
356 break;
357 case USB_SPEED_SUPER:
358 case USB_SPEED_SUPER_PLUS:
359 /*
360 * Not take default 5ms qlen for super speed HC to
361 * save memory, and iperf tests show 2.5ms qlen can
362 * work well
363 */
364 dev->rx_qlen = 5 * MAX_QUEUE_MEMORY / dev->rx_urb_size;
365 dev->tx_qlen = 5 * MAX_QUEUE_MEMORY / dev->hard_mtu;
366 break;
367 default:
368 dev->rx_qlen = dev->tx_qlen = 4;
369 }
370}
371EXPORT_SYMBOL_GPL(usbnet_update_max_qlen);
372
373
374/*-------------------------------------------------------------------------
375 *
376 * Network Device Driver (peer link to "Host Device", from USB host)
377 *
378 *-------------------------------------------------------------------------*/
379
380int usbnet_change_mtu (struct net_device *net, int new_mtu)
381{
382 struct usbnet *dev = netdev_priv(net);
383 int ll_mtu = new_mtu + net->hard_header_len;
384 int old_hard_mtu = dev->hard_mtu;
385 int old_rx_urb_size = dev->rx_urb_size;
386
387 // no second zero-length packet read wanted after mtu-sized packets
388 if ((ll_mtu % dev->maxpacket) == 0)
389 return -EDOM;
390 net->mtu = new_mtu;
391
392 dev->hard_mtu = net->mtu + net->hard_header_len;
393 if (dev->rx_urb_size == old_hard_mtu) {
394 dev->rx_urb_size = dev->hard_mtu;
395 if (dev->rx_urb_size > old_rx_urb_size) {
396 usbnet_pause_rx(dev);
397 usbnet_unlink_rx_urbs(dev);
398 usbnet_resume_rx(dev);
399 }
400 }
401
402 /* max qlen depend on hard_mtu and rx_urb_size */
403 usbnet_update_max_qlen(dev);
404
405 return 0;
406}
407EXPORT_SYMBOL_GPL(usbnet_change_mtu);
408
409/* The caller must hold list->lock */
410static void __usbnet_queue_skb(struct sk_buff_head *list,
411 struct sk_buff *newsk, enum skb_state state)
412{
413 struct skb_data *entry = (struct skb_data *) newsk->cb;
414
415 __skb_queue_tail(list, newsk);
416 entry->state = state;
417}
418
419/*-------------------------------------------------------------------------*/
420
421/* some LK 2.4 HCDs oopsed if we freed or resubmitted urbs from
422 * completion callbacks. 2.5 should have fixed those bugs...
423 */
424
425static enum skb_state defer_bh(struct usbnet *dev, struct sk_buff *skb,
426 struct sk_buff_head *list, enum skb_state state)
427{
428 unsigned long flags;
429 enum skb_state old_state;
430 struct skb_data *entry = (struct skb_data *) skb->cb;
431
432 spin_lock_irqsave(&list->lock, flags);
433 old_state = entry->state;
434 entry->state = state;
435 __skb_unlink(skb, list);
436
437 /* defer_bh() is never called with list == &dev->done.
438 * spin_lock_nested() tells lockdep that it is OK to take
439 * dev->done.lock here with list->lock held.
440 */
441 spin_lock_nested(&dev->done.lock, SINGLE_DEPTH_NESTING);
442
443 __skb_queue_tail(&dev->done, skb);
444 if (dev->done.qlen == 1)
445 tasklet_schedule(&dev->bh);
446 spin_unlock(&dev->done.lock);
447 spin_unlock_irqrestore(&list->lock, flags);
448 return old_state;
449}
450
451/* some work can't be done in tasklets, so we use keventd
452 *
453 * NOTE: annoying asymmetry: if it's active, schedule_work() fails,
454 * but tasklet_schedule() doesn't. hope the failure is rare.
455 */
456void usbnet_defer_kevent (struct usbnet *dev, int work)
457{
458 set_bit (work, &dev->flags);
459 if (!schedule_work (&dev->kevent)) {
460 if (net_ratelimit())
461 netdev_err(dev->net, "kevent %d may have been dropped\n", work);
462 } else {
463 netdev_dbg(dev->net, "kevent %d scheduled\n", work);
464 }
465}
466EXPORT_SYMBOL_GPL(usbnet_defer_kevent);
467
468/*-------------------------------------------------------------------------*/
469
470static void rx_complete (struct urb *urb);
471
472static int rx_submit (struct usbnet *dev, struct urb *urb, gfp_t flags)
473{
474 struct sk_buff *skb;
475 struct skb_data *entry;
476 int retval = 0;
477 unsigned long lockflags;
478 size_t size = dev->rx_urb_size;
479
480 /* prevent rx skb allocation when error ratio is high */
481 if (test_bit(EVENT_RX_KILL, &dev->flags)) {
482 usb_free_urb(urb);
483 return -ENOLINK;
484 }
485
486 skb = __netdev_alloc_skb_ip_align(dev->net, size, flags);
487 if (!skb) {
488 netif_dbg(dev, rx_err, dev->net, "no rx skb\n");
489 usbnet_defer_kevent (dev, EVENT_RX_MEMORY);
490 usb_free_urb (urb);
491 return -ENOMEM;
492 }
493
494 entry = (struct skb_data *) skb->cb;
495 entry->urb = urb;
496 entry->dev = dev;
497 entry->length = 0;
498
499 usb_fill_bulk_urb (urb, dev->udev, dev->in,
500 skb->data, size, rx_complete, skb);
501
502 spin_lock_irqsave (&dev->rxq.lock, lockflags);
503
504 if (netif_running (dev->net) &&
505 netif_device_present (dev->net) &&
506 !test_bit (EVENT_RX_HALT, &dev->flags) &&
507 !test_bit (EVENT_DEV_ASLEEP, &dev->flags)) {
508 switch (retval = usb_submit_urb (urb, GFP_ATOMIC)) {
509 case -EPIPE:
510 usbnet_defer_kevent (dev, EVENT_RX_HALT);
511 break;
512 case -ENOMEM:
513 usbnet_defer_kevent (dev, EVENT_RX_MEMORY);
514 break;
515 case -ENODEV:
516 netif_dbg(dev, ifdown, dev->net, "device gone\n");
517 netif_device_detach (dev->net);
518 break;
519 case -EHOSTUNREACH:
520 retval = -ENOLINK;
521 break;
522 default:
523 netif_dbg(dev, rx_err, dev->net,
524 "rx submit, %d\n", retval);
525 tasklet_schedule (&dev->bh);
526 break;
527 case 0:
528 __usbnet_queue_skb(&dev->rxq, skb, rx_start);
529 }
530 } else {
531 netif_dbg(dev, ifdown, dev->net, "rx: stopped\n");
532 retval = -ENOLINK;
533 }
534 spin_unlock_irqrestore (&dev->rxq.lock, lockflags);
535 if (retval) {
536 dev_kfree_skb_any (skb);
537 usb_free_urb (urb);
538 }
539 return retval;
540}
541
542
543/*-------------------------------------------------------------------------*/
544
545static inline void rx_process (struct usbnet *dev, struct sk_buff *skb)
546{
547 if (dev->driver_info->rx_fixup &&
548 !dev->driver_info->rx_fixup (dev, skb)) {
549 /* With RX_ASSEMBLE, rx_fixup() must update counters */
550 if (!(dev->driver_info->flags & FLAG_RX_ASSEMBLE))
551 dev->net->stats.rx_errors++;
552 goto done;
553 }
554 // else network stack removes extra byte if we forced a short packet
555
556 /* all data was already cloned from skb inside the driver */
557 if (dev->driver_info->flags & FLAG_MULTI_PACKET)
558 goto done;
559
560 if (skb->len < ETH_HLEN) {
561 dev->net->stats.rx_errors++;
562 dev->net->stats.rx_length_errors++;
563 netif_dbg(dev, rx_err, dev->net, "rx length %d\n", skb->len);
564 } else {
565 usbnet_skb_return(dev, skb);
566 return;
567 }
568
569done:
570 skb_queue_tail(&dev->done, skb);
571}
572
573/*-------------------------------------------------------------------------*/
574
575static void rx_complete (struct urb *urb)
576{
577 struct sk_buff *skb = (struct sk_buff *) urb->context;
578 struct skb_data *entry = (struct skb_data *) skb->cb;
579 struct usbnet *dev = entry->dev;
580 int urb_status = urb->status;
581 enum skb_state state;
582
583 skb_put (skb, urb->actual_length);
584 state = rx_done;
585 entry->urb = NULL;
586
587 switch (urb_status) {
588 /* success */
589 case 0:
590 break;
591
592 /* stalls need manual reset. this is rare ... except that
593 * when going through USB 2.0 TTs, unplug appears this way.
594 * we avoid the highspeed version of the ETIMEDOUT/EILSEQ
595 * storm, recovering as needed.
596 */
597 case -EPIPE:
598 dev->net->stats.rx_errors++;
599 usbnet_defer_kevent (dev, EVENT_RX_HALT);
600 // FALLTHROUGH
601
602 /* software-driven interface shutdown */
603 case -ECONNRESET: /* async unlink */
604 case -ESHUTDOWN: /* hardware gone */
605 netif_dbg(dev, ifdown, dev->net,
606 "rx shutdown, code %d\n", urb_status);
607 goto block;
608
609 /* we get controller i/o faults during hub_wq disconnect() delays.
610 * throttle down resubmits, to avoid log floods; just temporarily,
611 * so we still recover when the fault isn't a hub_wq delay.
612 */
613 case -EPROTO:
614 case -ETIME:
615 case -EILSEQ:
616 dev->net->stats.rx_errors++;
617 if (!timer_pending (&dev->delay)) {
618 mod_timer (&dev->delay, jiffies + THROTTLE_JIFFIES);
619 netif_dbg(dev, link, dev->net,
620 "rx throttle %d\n", urb_status);
621 }
622block:
623 state = rx_cleanup;
624 entry->urb = urb;
625 urb = NULL;
626 break;
627
628 /* data overrun ... flush fifo? */
629 case -EOVERFLOW:
630 dev->net->stats.rx_over_errors++;
631 // FALLTHROUGH
632
633 default:
634 state = rx_cleanup;
635 dev->net->stats.rx_errors++;
636 netif_dbg(dev, rx_err, dev->net, "rx status %d\n", urb_status);
637 break;
638 }
639
640 /* stop rx if packet error rate is high */
641 if (++dev->pkt_cnt > 30) {
642 dev->pkt_cnt = 0;
643 dev->pkt_err = 0;
644 } else {
645 if (state == rx_cleanup)
646 dev->pkt_err++;
647 if (dev->pkt_err > 20)
648 set_bit(EVENT_RX_KILL, &dev->flags);
649 }
650
651 state = defer_bh(dev, skb, &dev->rxq, state);
652
653 if (urb) {
654 if (netif_running (dev->net) &&
655 !test_bit (EVENT_RX_HALT, &dev->flags) &&
656 state != unlink_start) {
657 rx_submit (dev, urb, GFP_ATOMIC);
658 usb_mark_last_busy(dev->udev);
659 return;
660 }
661 usb_free_urb (urb);
662 }
663 netif_dbg(dev, rx_err, dev->net, "no read resubmitted\n");
664}
665
666/*-------------------------------------------------------------------------*/
667void usbnet_pause_rx(struct usbnet *dev)
668{
669 set_bit(EVENT_RX_PAUSED, &dev->flags);
670
671 netif_dbg(dev, rx_status, dev->net, "paused rx queue enabled\n");
672}
673EXPORT_SYMBOL_GPL(usbnet_pause_rx);
674
675void usbnet_resume_rx(struct usbnet *dev)
676{
677 struct sk_buff *skb;
678 int num = 0;
679
680 clear_bit(EVENT_RX_PAUSED, &dev->flags);
681
682 while ((skb = skb_dequeue(&dev->rxq_pause)) != NULL) {
683 usbnet_skb_return(dev, skb);
684 num++;
685 }
686
687 tasklet_schedule(&dev->bh);
688
689 netif_dbg(dev, rx_status, dev->net,
690 "paused rx queue disabled, %d skbs requeued\n", num);
691}
692EXPORT_SYMBOL_GPL(usbnet_resume_rx);
693
694void usbnet_purge_paused_rxq(struct usbnet *dev)
695{
696 skb_queue_purge(&dev->rxq_pause);
697}
698EXPORT_SYMBOL_GPL(usbnet_purge_paused_rxq);
699
700/*-------------------------------------------------------------------------*/
701
702// unlink pending rx/tx; completion handlers do all other cleanup
703
704static int unlink_urbs (struct usbnet *dev, struct sk_buff_head *q)
705{
706 unsigned long flags;
707 struct sk_buff *skb;
708 int count = 0;
709
710 spin_lock_irqsave (&q->lock, flags);
711 while (!skb_queue_empty(q)) {
712 struct skb_data *entry;
713 struct urb *urb;
714 int retval;
715
716 skb_queue_walk(q, skb) {
717 entry = (struct skb_data *) skb->cb;
718 if (entry->state != unlink_start)
719 goto found;
720 }
721 break;
722found:
723 entry->state = unlink_start;
724 urb = entry->urb;
725
726 /*
727 * Get reference count of the URB to avoid it to be
728 * freed during usb_unlink_urb, which may trigger
729 * use-after-free problem inside usb_unlink_urb since
730 * usb_unlink_urb is always racing with .complete
731 * handler(include defer_bh).
732 */
733 usb_get_urb(urb);
734 spin_unlock_irqrestore(&q->lock, flags);
735 // during some PM-driven resume scenarios,
736 // these (async) unlinks complete immediately
737 retval = usb_unlink_urb (urb);
738 if (retval != -EINPROGRESS && retval != 0)
739 netdev_dbg(dev->net, "unlink urb err, %d\n", retval);
740 else
741 count++;
742 usb_put_urb(urb);
743 spin_lock_irqsave(&q->lock, flags);
744 }
745 spin_unlock_irqrestore (&q->lock, flags);
746 return count;
747}
748
749// Flush all pending rx urbs
750// minidrivers may need to do this when the MTU changes
751
752void usbnet_unlink_rx_urbs(struct usbnet *dev)
753{
754 if (netif_running(dev->net)) {
755 (void) unlink_urbs (dev, &dev->rxq);
756 tasklet_schedule(&dev->bh);
757 }
758}
759EXPORT_SYMBOL_GPL(usbnet_unlink_rx_urbs);
760
761/*-------------------------------------------------------------------------*/
762
763static void wait_skb_queue_empty(struct sk_buff_head *q)
764{
765 unsigned long flags;
766
767 spin_lock_irqsave(&q->lock, flags);
768 while (!skb_queue_empty(q)) {
769 spin_unlock_irqrestore(&q->lock, flags);
770 schedule_timeout(msecs_to_jiffies(UNLINK_TIMEOUT_MS));
771 set_current_state(TASK_UNINTERRUPTIBLE);
772 spin_lock_irqsave(&q->lock, flags);
773 }
774 spin_unlock_irqrestore(&q->lock, flags);
775}
776
777// precondition: never called in_interrupt
778static void usbnet_terminate_urbs(struct usbnet *dev)
779{
780 DECLARE_WAITQUEUE(wait, current);
781 int temp;
782
783 /* ensure there are no more active urbs */
784 add_wait_queue(&dev->wait, &wait);
785 set_current_state(TASK_UNINTERRUPTIBLE);
786 temp = unlink_urbs(dev, &dev->txq) +
787 unlink_urbs(dev, &dev->rxq);
788
789 /* maybe wait for deletions to finish. */
790 wait_skb_queue_empty(&dev->rxq);
791 wait_skb_queue_empty(&dev->txq);
792 wait_skb_queue_empty(&dev->done);
793 netif_dbg(dev, ifdown, dev->net,
794 "waited for %d urb completions\n", temp);
795 set_current_state(TASK_RUNNING);
796 remove_wait_queue(&dev->wait, &wait);
797}
798
799int usbnet_stop (struct net_device *net)
800{
801 struct usbnet *dev = netdev_priv(net);
802 struct driver_info *info = dev->driver_info;
803 int retval, pm, mpn;
804
805 clear_bit(EVENT_DEV_OPEN, &dev->flags);
806 netif_stop_queue (net);
807
808 netif_info(dev, ifdown, dev->net,
809 "stop stats: rx/tx %lu/%lu, errs %lu/%lu\n",
810 net->stats.rx_packets, net->stats.tx_packets,
811 net->stats.rx_errors, net->stats.tx_errors);
812
813 /* to not race resume */
814 pm = usb_autopm_get_interface(dev->intf);
815 /* allow minidriver to stop correctly (wireless devices to turn off
816 * radio etc) */
817 if (info->stop) {
818 retval = info->stop(dev);
819 if (retval < 0)
820 netif_info(dev, ifdown, dev->net,
821 "stop fail (%d) usbnet usb-%s-%s, %s\n",
822 retval,
823 dev->udev->bus->bus_name, dev->udev->devpath,
824 info->description);
825 }
826
827 if (!(info->flags & FLAG_AVOID_UNLINK_URBS))
828 usbnet_terminate_urbs(dev);
829
830 usbnet_status_stop(dev);
831
832 usbnet_purge_paused_rxq(dev);
833
834 mpn = !test_and_clear_bit(EVENT_NO_RUNTIME_PM, &dev->flags);
835
836 /* deferred work (task, timer, softirq) must also stop.
837 * can't flush_scheduled_work() until we drop rtnl (later),
838 * else workers could deadlock; so make workers a NOP.
839 */
840 dev->flags = 0;
841 del_timer_sync (&dev->delay);
842 tasklet_kill (&dev->bh);
843 if (!pm)
844 usb_autopm_put_interface(dev->intf);
845
846 if (info->manage_power && mpn)
847 info->manage_power(dev, 0);
848 else
849 usb_autopm_put_interface(dev->intf);
850
851 return 0;
852}
853EXPORT_SYMBOL_GPL(usbnet_stop);
854
855/*-------------------------------------------------------------------------*/
856
857// posts reads, and enables write queuing
858
859// precondition: never called in_interrupt
860
861int usbnet_open (struct net_device *net)
862{
863 struct usbnet *dev = netdev_priv(net);
864 int retval;
865 struct driver_info *info = dev->driver_info;
866
867 if ((retval = usb_autopm_get_interface(dev->intf)) < 0) {
868 netif_info(dev, ifup, dev->net,
869 "resumption fail (%d) usbnet usb-%s-%s, %s\n",
870 retval,
871 dev->udev->bus->bus_name,
872 dev->udev->devpath,
873 info->description);
874 goto done_nopm;
875 }
876
877 // put into "known safe" state
878 if (info->reset && (retval = info->reset (dev)) < 0) {
879 netif_info(dev, ifup, dev->net,
880 "open reset fail (%d) usbnet usb-%s-%s, %s\n",
881 retval,
882 dev->udev->bus->bus_name,
883 dev->udev->devpath,
884 info->description);
885 goto done;
886 }
887
888 /* hard_mtu or rx_urb_size may change in reset() */
889 usbnet_update_max_qlen(dev);
890
891 // insist peer be connected
892 if (info->check_connect && (retval = info->check_connect (dev)) < 0) {
893 netif_dbg(dev, ifup, dev->net, "can't open; %d\n", retval);
894 goto done;
895 }
896
897 /* start any status interrupt transfer */
898 if (dev->interrupt) {
899 retval = usbnet_status_start(dev, GFP_KERNEL);
900 if (retval < 0) {
901 netif_err(dev, ifup, dev->net,
902 "intr submit %d\n", retval);
903 goto done;
904 }
905 }
906
907 set_bit(EVENT_DEV_OPEN, &dev->flags);
908 netif_start_queue (net);
909 netif_info(dev, ifup, dev->net,
910 "open: enable queueing (rx %d, tx %d) mtu %d %s framing\n",
911 (int)RX_QLEN(dev), (int)TX_QLEN(dev),
912 dev->net->mtu,
913 (dev->driver_info->flags & FLAG_FRAMING_NC) ? "NetChip" :
914 (dev->driver_info->flags & FLAG_FRAMING_GL) ? "GeneSys" :
915 (dev->driver_info->flags & FLAG_FRAMING_Z) ? "Zaurus" :
916 (dev->driver_info->flags & FLAG_FRAMING_RN) ? "RNDIS" :
917 (dev->driver_info->flags & FLAG_FRAMING_AX) ? "ASIX" :
918 "simple");
919
920 /* reset rx error state */
921 dev->pkt_cnt = 0;
922 dev->pkt_err = 0;
923 clear_bit(EVENT_RX_KILL, &dev->flags);
924
925 // delay posting reads until we're fully open
926 tasklet_schedule (&dev->bh);
927 if (info->manage_power) {
928 retval = info->manage_power(dev, 1);
929 if (retval < 0) {
930 retval = 0;
931 set_bit(EVENT_NO_RUNTIME_PM, &dev->flags);
932 } else {
933 usb_autopm_put_interface(dev->intf);
934 }
935 }
936 return retval;
937done:
938 usb_autopm_put_interface(dev->intf);
939done_nopm:
940 return retval;
941}
942EXPORT_SYMBOL_GPL(usbnet_open);
943
944/*-------------------------------------------------------------------------*/
945
946/* ethtool methods; minidrivers may need to add some more, but
947 * they'll probably want to use this base set.
948 */
949
950int usbnet_get_settings (struct net_device *net, struct ethtool_cmd *cmd)
951{
952 struct usbnet *dev = netdev_priv(net);
953
954 if (!dev->mii.mdio_read)
955 return -EOPNOTSUPP;
956
957 return mii_ethtool_gset(&dev->mii, cmd);
958}
959EXPORT_SYMBOL_GPL(usbnet_get_settings);
960
961int usbnet_set_settings (struct net_device *net, struct ethtool_cmd *cmd)
962{
963 struct usbnet *dev = netdev_priv(net);
964 int retval;
965
966 if (!dev->mii.mdio_write)
967 return -EOPNOTSUPP;
968
969 retval = mii_ethtool_sset(&dev->mii, cmd);
970
971 /* link speed/duplex might have changed */
972 if (dev->driver_info->link_reset)
973 dev->driver_info->link_reset(dev);
974
975 /* hard_mtu or rx_urb_size may change in link_reset() */
976 usbnet_update_max_qlen(dev);
977
978 return retval;
979
980}
981EXPORT_SYMBOL_GPL(usbnet_set_settings);
982
983u32 usbnet_get_link (struct net_device *net)
984{
985 struct usbnet *dev = netdev_priv(net);
986
987 /* If a check_connect is defined, return its result */
988 if (dev->driver_info->check_connect)
989 return dev->driver_info->check_connect (dev) == 0;
990
991 /* if the device has mii operations, use those */
992 if (dev->mii.mdio_read)
993 return mii_link_ok(&dev->mii);
994
995 /* Otherwise, dtrt for drivers calling netif_carrier_{on,off} */
996 return ethtool_op_get_link(net);
997}
998EXPORT_SYMBOL_GPL(usbnet_get_link);
999
1000int usbnet_nway_reset(struct net_device *net)
1001{
1002 struct usbnet *dev = netdev_priv(net);
1003
1004 if (!dev->mii.mdio_write)
1005 return -EOPNOTSUPP;
1006
1007 return mii_nway_restart(&dev->mii);
1008}
1009EXPORT_SYMBOL_GPL(usbnet_nway_reset);
1010
1011void usbnet_get_drvinfo (struct net_device *net, struct ethtool_drvinfo *info)
1012{
1013 struct usbnet *dev = netdev_priv(net);
1014
1015 strlcpy (info->driver, dev->driver_name, sizeof info->driver);
1016 strlcpy (info->version, DRIVER_VERSION, sizeof info->version);
1017 strlcpy (info->fw_version, dev->driver_info->description,
1018 sizeof info->fw_version);
1019 usb_make_path (dev->udev, info->bus_info, sizeof info->bus_info);
1020}
1021EXPORT_SYMBOL_GPL(usbnet_get_drvinfo);
1022
1023u32 usbnet_get_msglevel (struct net_device *net)
1024{
1025 struct usbnet *dev = netdev_priv(net);
1026
1027 return dev->msg_enable;
1028}
1029EXPORT_SYMBOL_GPL(usbnet_get_msglevel);
1030
1031void usbnet_set_msglevel (struct net_device *net, u32 level)
1032{
1033 struct usbnet *dev = netdev_priv(net);
1034
1035 dev->msg_enable = level;
1036}
1037EXPORT_SYMBOL_GPL(usbnet_set_msglevel);
1038
1039/* drivers may override default ethtool_ops in their bind() routine */
1040static const struct ethtool_ops usbnet_ethtool_ops = {
1041 .get_settings = usbnet_get_settings,
1042 .set_settings = usbnet_set_settings,
1043 .get_link = usbnet_get_link,
1044 .nway_reset = usbnet_nway_reset,
1045 .get_drvinfo = usbnet_get_drvinfo,
1046 .get_msglevel = usbnet_get_msglevel,
1047 .set_msglevel = usbnet_set_msglevel,
1048 .get_ts_info = ethtool_op_get_ts_info,
1049};
1050
1051/*-------------------------------------------------------------------------*/
1052
1053static void __handle_link_change(struct usbnet *dev)
1054{
1055 if (!test_bit(EVENT_DEV_OPEN, &dev->flags))
1056 return;
1057
1058 if (!netif_carrier_ok(dev->net)) {
1059 /* kill URBs for reading packets to save bus bandwidth */
1060 unlink_urbs(dev, &dev->rxq);
1061
1062 /*
1063 * tx_timeout will unlink URBs for sending packets and
1064 * tx queue is stopped by netcore after link becomes off
1065 */
1066 } else {
1067 /* submitting URBs for reading packets */
1068 tasklet_schedule(&dev->bh);
1069 }
1070
1071 /* hard_mtu or rx_urb_size may change during link change */
1072 usbnet_update_max_qlen(dev);
1073
1074 clear_bit(EVENT_LINK_CHANGE, &dev->flags);
1075}
1076
1077static void usbnet_set_rx_mode(struct net_device *net)
1078{
1079 struct usbnet *dev = netdev_priv(net);
1080
1081 usbnet_defer_kevent(dev, EVENT_SET_RX_MODE);
1082}
1083
1084static void __handle_set_rx_mode(struct usbnet *dev)
1085{
1086 if (dev->driver_info->set_rx_mode)
1087 (dev->driver_info->set_rx_mode)(dev);
1088
1089 clear_bit(EVENT_SET_RX_MODE, &dev->flags);
1090}
1091
1092/* work that cannot be done in interrupt context uses keventd.
1093 *
1094 * NOTE: with 2.5 we could do more of this using completion callbacks,
1095 * especially now that control transfers can be queued.
1096 */
1097static void
1098usbnet_deferred_kevent (struct work_struct *work)
1099{
1100 struct usbnet *dev =
1101 container_of(work, struct usbnet, kevent);
1102 int status;
1103
1104 /* usb_clear_halt() needs a thread context */
1105 if (test_bit (EVENT_TX_HALT, &dev->flags)) {
1106 unlink_urbs (dev, &dev->txq);
1107 status = usb_autopm_get_interface(dev->intf);
1108 if (status < 0)
1109 goto fail_pipe;
1110 status = usb_clear_halt (dev->udev, dev->out);
1111 usb_autopm_put_interface(dev->intf);
1112 if (status < 0 &&
1113 status != -EPIPE &&
1114 status != -ESHUTDOWN) {
1115 if (netif_msg_tx_err (dev))
1116fail_pipe:
1117 netdev_err(dev->net, "can't clear tx halt, status %d\n",
1118 status);
1119 } else {
1120 clear_bit (EVENT_TX_HALT, &dev->flags);
1121 if (status != -ESHUTDOWN)
1122 netif_wake_queue (dev->net);
1123 }
1124 }
1125 if (test_bit (EVENT_RX_HALT, &dev->flags)) {
1126 unlink_urbs (dev, &dev->rxq);
1127 status = usb_autopm_get_interface(dev->intf);
1128 if (status < 0)
1129 goto fail_halt;
1130 status = usb_clear_halt (dev->udev, dev->in);
1131 usb_autopm_put_interface(dev->intf);
1132 if (status < 0 &&
1133 status != -EPIPE &&
1134 status != -ESHUTDOWN) {
1135 if (netif_msg_rx_err (dev))
1136fail_halt:
1137 netdev_err(dev->net, "can't clear rx halt, status %d\n",
1138 status);
1139 } else {
1140 clear_bit (EVENT_RX_HALT, &dev->flags);
1141 tasklet_schedule (&dev->bh);
1142 }
1143 }
1144
1145 /* tasklet could resubmit itself forever if memory is tight */
1146 if (test_bit (EVENT_RX_MEMORY, &dev->flags)) {
1147 struct urb *urb = NULL;
1148 int resched = 1;
1149
1150 if (netif_running (dev->net))
1151 urb = usb_alloc_urb (0, GFP_KERNEL);
1152 else
1153 clear_bit (EVENT_RX_MEMORY, &dev->flags);
1154 if (urb != NULL) {
1155 clear_bit (EVENT_RX_MEMORY, &dev->flags);
1156 status = usb_autopm_get_interface(dev->intf);
1157 if (status < 0) {
1158 usb_free_urb(urb);
1159 goto fail_lowmem;
1160 }
1161 if (rx_submit (dev, urb, GFP_KERNEL) == -ENOLINK)
1162 resched = 0;
1163 usb_autopm_put_interface(dev->intf);
1164fail_lowmem:
1165 if (resched)
1166 tasklet_schedule (&dev->bh);
1167 }
1168 }
1169
1170 if (test_bit (EVENT_LINK_RESET, &dev->flags)) {
1171 struct driver_info *info = dev->driver_info;
1172 int retval = 0;
1173
1174 clear_bit (EVENT_LINK_RESET, &dev->flags);
1175 status = usb_autopm_get_interface(dev->intf);
1176 if (status < 0)
1177 goto skip_reset;
1178 if(info->link_reset && (retval = info->link_reset(dev)) < 0) {
1179 usb_autopm_put_interface(dev->intf);
1180skip_reset:
1181 netdev_info(dev->net, "link reset failed (%d) usbnet usb-%s-%s, %s\n",
1182 retval,
1183 dev->udev->bus->bus_name,
1184 dev->udev->devpath,
1185 info->description);
1186 } else {
1187 usb_autopm_put_interface(dev->intf);
1188 }
1189
1190 /* handle link change from link resetting */
1191 __handle_link_change(dev);
1192 }
1193
1194 if (test_bit (EVENT_LINK_CHANGE, &dev->flags))
1195 __handle_link_change(dev);
1196
1197 if (test_bit (EVENT_SET_RX_MODE, &dev->flags))
1198 __handle_set_rx_mode(dev);
1199
1200
1201 if (dev->flags)
1202 netdev_dbg(dev->net, "kevent done, flags = 0x%lx\n", dev->flags);
1203}
1204
1205/*-------------------------------------------------------------------------*/
1206
1207static void tx_complete (struct urb *urb)
1208{
1209 struct sk_buff *skb = (struct sk_buff *) urb->context;
1210 struct skb_data *entry = (struct skb_data *) skb->cb;
1211 struct usbnet *dev = entry->dev;
1212
1213 if (urb->status == 0) {
1214 dev->net->stats.tx_packets += entry->packets;
1215 dev->net->stats.tx_bytes += entry->length;
1216 } else {
1217 dev->net->stats.tx_errors++;
1218
1219 switch (urb->status) {
1220 case -EPIPE:
1221 usbnet_defer_kevent (dev, EVENT_TX_HALT);
1222 break;
1223
1224 /* software-driven interface shutdown */
1225 case -ECONNRESET: // async unlink
1226 case -ESHUTDOWN: // hardware gone
1227 break;
1228
1229 /* like rx, tx gets controller i/o faults during hub_wq
1230 * delays and so it uses the same throttling mechanism.
1231 */
1232 case -EPROTO:
1233 case -ETIME:
1234 case -EILSEQ:
1235 usb_mark_last_busy(dev->udev);
1236 if (!timer_pending (&dev->delay)) {
1237 mod_timer (&dev->delay,
1238 jiffies + THROTTLE_JIFFIES);
1239 netif_dbg(dev, link, dev->net,
1240 "tx throttle %d\n", urb->status);
1241 }
1242 netif_stop_queue (dev->net);
1243 break;
1244 default:
1245 netif_dbg(dev, tx_err, dev->net,
1246 "tx err %d\n", entry->urb->status);
1247 break;
1248 }
1249 }
1250
1251 usb_autopm_put_interface_async(dev->intf);
1252 (void) defer_bh(dev, skb, &dev->txq, tx_done);
1253}
1254
1255/*-------------------------------------------------------------------------*/
1256
1257void usbnet_tx_timeout (struct net_device *net)
1258{
1259 struct usbnet *dev = netdev_priv(net);
1260
1261 unlink_urbs (dev, &dev->txq);
1262 tasklet_schedule (&dev->bh);
1263 /* this needs to be handled individually because the generic layer
1264 * doesn't know what is sufficient and could not restore private
1265 * information if a remedy of an unconditional reset were used.
1266 */
1267 if (dev->driver_info->recover)
1268 (dev->driver_info->recover)(dev);
1269}
1270EXPORT_SYMBOL_GPL(usbnet_tx_timeout);
1271
1272/*-------------------------------------------------------------------------*/
1273
1274static int build_dma_sg(const struct sk_buff *skb, struct urb *urb)
1275{
1276 unsigned num_sgs, total_len = 0;
1277 int i, s = 0;
1278
1279 num_sgs = skb_shinfo(skb)->nr_frags + 1;
1280 if (num_sgs == 1)
1281 return 0;
1282
1283 /* reserve one for zero packet */
1284 urb->sg = kmalloc((num_sgs + 1) * sizeof(struct scatterlist),
1285 GFP_ATOMIC);
1286 if (!urb->sg)
1287 return -ENOMEM;
1288
1289 urb->num_sgs = num_sgs;
1290 sg_init_table(urb->sg, urb->num_sgs + 1);
1291
1292 sg_set_buf(&urb->sg[s++], skb->data, skb_headlen(skb));
1293 total_len += skb_headlen(skb);
1294
1295 for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
1296 struct skb_frag_struct *f = &skb_shinfo(skb)->frags[i];
1297
1298 total_len += skb_frag_size(f);
1299 sg_set_page(&urb->sg[i + s], f->page.p, f->size,
1300 f->page_offset);
1301 }
1302 urb->transfer_buffer_length = total_len;
1303
1304 return 1;
1305}
1306
1307netdev_tx_t usbnet_start_xmit (struct sk_buff *skb,
1308 struct net_device *net)
1309{
1310 struct usbnet *dev = netdev_priv(net);
1311 unsigned int length;
1312 struct urb *urb = NULL;
1313 struct skb_data *entry;
1314 struct driver_info *info = dev->driver_info;
1315 unsigned long flags;
1316 int retval;
1317
1318 if (skb)
1319 skb_tx_timestamp(skb);
1320
1321 // some devices want funky USB-level framing, for
1322 // win32 driver (usually) and/or hardware quirks
1323 if (info->tx_fixup) {
1324 skb = info->tx_fixup (dev, skb, GFP_ATOMIC);
1325 if (!skb) {
1326 /* packet collected; minidriver waiting for more */
1327 if (info->flags & FLAG_MULTI_PACKET)
1328 goto not_drop;
1329 netif_dbg(dev, tx_err, dev->net, "can't tx_fixup skb\n");
1330 goto drop;
1331 }
1332 }
1333
1334 if (!(urb = usb_alloc_urb (0, GFP_ATOMIC))) {
1335 netif_dbg(dev, tx_err, dev->net, "no urb\n");
1336 goto drop;
1337 }
1338
1339 entry = (struct skb_data *) skb->cb;
1340 entry->urb = urb;
1341 entry->dev = dev;
1342
1343 usb_fill_bulk_urb (urb, dev->udev, dev->out,
1344 skb->data, skb->len, tx_complete, skb);
1345 if (dev->can_dma_sg) {
1346 if (build_dma_sg(skb, urb) < 0)
1347 goto drop;
1348 }
1349 length = urb->transfer_buffer_length;
1350
1351 /* don't assume the hardware handles USB_ZERO_PACKET
1352 * NOTE: strictly conforming cdc-ether devices should expect
1353 * the ZLP here, but ignore the one-byte packet.
1354 * NOTE2: CDC NCM specification is different from CDC ECM when
1355 * handling ZLP/short packets, so cdc_ncm driver will make short
1356 * packet itself if needed.
1357 */
1358 if (length % dev->maxpacket == 0) {
1359 if (!(info->flags & FLAG_SEND_ZLP)) {
1360 if (!(info->flags & FLAG_MULTI_PACKET)) {
1361 length++;
1362 if (skb_tailroom(skb) && !urb->num_sgs) {
1363 skb->data[skb->len] = 0;
1364 __skb_put(skb, 1);
1365 } else if (urb->num_sgs)
1366 sg_set_buf(&urb->sg[urb->num_sgs++],
1367 dev->padding_pkt, 1);
1368 }
1369 } else
1370 urb->transfer_flags |= URB_ZERO_PACKET;
1371 }
1372 urb->transfer_buffer_length = length;
1373
1374 if (info->flags & FLAG_MULTI_PACKET) {
1375 /* Driver has set number of packets and a length delta.
1376 * Calculate the complete length and ensure that it's
1377 * positive.
1378 */
1379 entry->length += length;
1380 if (WARN_ON_ONCE(entry->length <= 0))
1381 entry->length = length;
1382 } else {
1383 usbnet_set_skb_tx_stats(skb, 1, length);
1384 }
1385
1386 spin_lock_irqsave(&dev->txq.lock, flags);
1387 retval = usb_autopm_get_interface_async(dev->intf);
1388 if (retval < 0) {
1389 spin_unlock_irqrestore(&dev->txq.lock, flags);
1390 goto drop;
1391 }
1392
1393#ifdef CONFIG_PM
1394 /* if this triggers the device is still a sleep */
1395 if (test_bit(EVENT_DEV_ASLEEP, &dev->flags)) {
1396 /* transmission will be done in resume */
1397 usb_anchor_urb(urb, &dev->deferred);
1398 /* no use to process more packets */
1399 netif_stop_queue(net);
1400 usb_put_urb(urb);
1401 spin_unlock_irqrestore(&dev->txq.lock, flags);
1402 netdev_dbg(dev->net, "Delaying transmission for resumption\n");
1403 goto deferred;
1404 }
1405#endif
1406
1407 switch ((retval = usb_submit_urb (urb, GFP_ATOMIC))) {
1408 case -EPIPE:
1409 netif_stop_queue (net);
1410 usbnet_defer_kevent (dev, EVENT_TX_HALT);
1411 usb_autopm_put_interface_async(dev->intf);
1412 break;
1413 default:
1414 usb_autopm_put_interface_async(dev->intf);
1415 netif_dbg(dev, tx_err, dev->net,
1416 "tx: submit urb err %d\n", retval);
1417 break;
1418 case 0:
1419 netif_trans_update(net);
1420 __usbnet_queue_skb(&dev->txq, skb, tx_start);
1421 if (dev->txq.qlen >= TX_QLEN (dev))
1422 netif_stop_queue (net);
1423 }
1424 spin_unlock_irqrestore (&dev->txq.lock, flags);
1425
1426 if (retval) {
1427 netif_dbg(dev, tx_err, dev->net, "drop, code %d\n", retval);
1428drop:
1429 dev->net->stats.tx_dropped++;
1430not_drop:
1431 if (skb)
1432 dev_kfree_skb_any (skb);
1433 if (urb) {
1434 kfree(urb->sg);
1435 usb_free_urb(urb);
1436 }
1437 } else
1438 netif_dbg(dev, tx_queued, dev->net,
1439 "> tx, len %u, type 0x%x\n", length, skb->protocol);
1440#ifdef CONFIG_PM
1441deferred:
1442#endif
1443 return NETDEV_TX_OK;
1444}
1445EXPORT_SYMBOL_GPL(usbnet_start_xmit);
1446
1447static int rx_alloc_submit(struct usbnet *dev, gfp_t flags)
1448{
1449 struct urb *urb;
1450 int i;
1451 int ret = 0;
1452
1453 /* don't refill the queue all at once */
1454 for (i = 0; i < 10 && dev->rxq.qlen < RX_QLEN(dev); i++) {
1455 urb = usb_alloc_urb(0, flags);
1456 if (urb != NULL) {
1457 ret = rx_submit(dev, urb, flags);
1458 if (ret)
1459 goto err;
1460 } else {
1461 ret = -ENOMEM;
1462 goto err;
1463 }
1464 }
1465err:
1466 return ret;
1467}
1468
1469/*-------------------------------------------------------------------------*/
1470
1471// tasklet (work deferred from completions, in_irq) or timer
1472
1473static void usbnet_bh (unsigned long param)
1474{
1475 struct usbnet *dev = (struct usbnet *) param;
1476 struct sk_buff *skb;
1477 struct skb_data *entry;
1478
1479 while ((skb = skb_dequeue (&dev->done))) {
1480 entry = (struct skb_data *) skb->cb;
1481 switch (entry->state) {
1482 case rx_done:
1483 entry->state = rx_cleanup;
1484 rx_process (dev, skb);
1485 continue;
1486 case tx_done:
1487 kfree(entry->urb->sg);
1488 case rx_cleanup:
1489 usb_free_urb (entry->urb);
1490 dev_kfree_skb (skb);
1491 continue;
1492 default:
1493 netdev_dbg(dev->net, "bogus skb state %d\n", entry->state);
1494 }
1495 }
1496
1497 /* restart RX again after disabling due to high error rate */
1498 clear_bit(EVENT_RX_KILL, &dev->flags);
1499
1500 /* waiting for all pending urbs to complete?
1501 * only then can we forgo submitting anew
1502 */
1503 if (waitqueue_active(&dev->wait)) {
1504 if (dev->txq.qlen + dev->rxq.qlen + dev->done.qlen == 0)
1505 wake_up_all(&dev->wait);
1506
1507 // or are we maybe short a few urbs?
1508 } else if (netif_running (dev->net) &&
1509 netif_device_present (dev->net) &&
1510 netif_carrier_ok(dev->net) &&
1511 !timer_pending(&dev->delay) &&
1512 !test_bit(EVENT_RX_PAUSED, &dev->flags) &&
1513 !test_bit(EVENT_RX_HALT, &dev->flags)) {
1514 int temp = dev->rxq.qlen;
1515
1516 if (temp < RX_QLEN(dev)) {
1517 if (rx_alloc_submit(dev, GFP_ATOMIC) == -ENOLINK)
1518 return;
1519 if (temp != dev->rxq.qlen)
1520 netif_dbg(dev, link, dev->net,
1521 "rxqlen %d --> %d\n",
1522 temp, dev->rxq.qlen);
1523 if (dev->rxq.qlen < RX_QLEN(dev))
1524 tasklet_schedule (&dev->bh);
1525 }
1526 if (dev->txq.qlen < TX_QLEN (dev))
1527 netif_wake_queue (dev->net);
1528 }
1529}
1530
1531
1532/*-------------------------------------------------------------------------
1533 *
1534 * USB Device Driver support
1535 *
1536 *-------------------------------------------------------------------------*/
1537
1538// precondition: never called in_interrupt
1539
1540void usbnet_disconnect (struct usb_interface *intf)
1541{
1542 struct usbnet *dev;
1543 struct usb_device *xdev;
1544 struct net_device *net;
1545
1546 dev = usb_get_intfdata(intf);
1547 usb_set_intfdata(intf, NULL);
1548 if (!dev)
1549 return;
1550
1551 xdev = interface_to_usbdev (intf);
1552
1553 netif_info(dev, probe, dev->net, "unregister '%s' usb-%s-%s, %s\n",
1554 intf->dev.driver->name,
1555 xdev->bus->bus_name, xdev->devpath,
1556 dev->driver_info->description);
1557
1558 net = dev->net;
1559 unregister_netdev (net);
1560
1561 cancel_work_sync(&dev->kevent);
1562
1563 usb_scuttle_anchored_urbs(&dev->deferred);
1564
1565 if (dev->driver_info->unbind)
1566 dev->driver_info->unbind (dev, intf);
1567
1568 usb_kill_urb(dev->interrupt);
1569 usb_free_urb(dev->interrupt);
1570 kfree(dev->padding_pkt);
1571
1572 free_netdev(net);
1573}
1574EXPORT_SYMBOL_GPL(usbnet_disconnect);
1575
1576static const struct net_device_ops usbnet_netdev_ops = {
1577 .ndo_open = usbnet_open,
1578 .ndo_stop = usbnet_stop,
1579 .ndo_start_xmit = usbnet_start_xmit,
1580 .ndo_tx_timeout = usbnet_tx_timeout,
1581 .ndo_set_rx_mode = usbnet_set_rx_mode,
1582 .ndo_change_mtu = usbnet_change_mtu,
1583 .ndo_set_mac_address = eth_mac_addr,
1584 .ndo_validate_addr = eth_validate_addr,
1585};
1586
1587/*-------------------------------------------------------------------------*/
1588
1589// precondition: never called in_interrupt
1590
1591static struct device_type wlan_type = {
1592 .name = "wlan",
1593};
1594
1595static struct device_type wwan_type = {
1596 .name = "wwan",
1597};
1598
1599int
1600usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod)
1601{
1602 struct usbnet *dev;
1603 struct net_device *net;
1604 struct usb_host_interface *interface;
1605 struct driver_info *info;
1606 struct usb_device *xdev;
1607 int status;
1608 const char *name;
1609 struct usb_driver *driver = to_usb_driver(udev->dev.driver);
1610
1611 /* usbnet already took usb runtime pm, so have to enable the feature
1612 * for usb interface, otherwise usb_autopm_get_interface may return
1613 * failure if RUNTIME_PM is enabled.
1614 */
1615 if (!driver->supports_autosuspend) {
1616 driver->supports_autosuspend = 1;
1617 pm_runtime_enable(&udev->dev);
1618 }
1619
1620 name = udev->dev.driver->name;
1621 info = (struct driver_info *) prod->driver_info;
1622 if (!info) {
1623 dev_dbg (&udev->dev, "blacklisted by %s\n", name);
1624 return -ENODEV;
1625 }
1626 xdev = interface_to_usbdev (udev);
1627 interface = udev->cur_altsetting;
1628
1629 status = -ENOMEM;
1630
1631 // set up our own records
1632 net = alloc_etherdev(sizeof(*dev));
1633 if (!net)
1634 goto out;
1635
1636 /* netdev_printk() needs this so do it as early as possible */
1637 SET_NETDEV_DEV(net, &udev->dev);
1638
1639 dev = netdev_priv(net);
1640 dev->udev = xdev;
1641 dev->intf = udev;
1642 dev->driver_info = info;
1643 dev->driver_name = name;
1644 dev->msg_enable = netif_msg_init (msg_level, NETIF_MSG_DRV
1645 | NETIF_MSG_PROBE | NETIF_MSG_LINK);
1646 init_waitqueue_head(&dev->wait);
1647 skb_queue_head_init (&dev->rxq);
1648 skb_queue_head_init (&dev->txq);
1649 skb_queue_head_init (&dev->done);
1650 skb_queue_head_init(&dev->rxq_pause);
1651 dev->bh.func = usbnet_bh;
1652 dev->bh.data = (unsigned long) dev;
1653 INIT_WORK (&dev->kevent, usbnet_deferred_kevent);
1654 init_usb_anchor(&dev->deferred);
1655 dev->delay.function = usbnet_bh;
1656 dev->delay.data = (unsigned long) dev;
1657 init_timer (&dev->delay);
1658 mutex_init (&dev->phy_mutex);
1659 mutex_init(&dev->interrupt_mutex);
1660 dev->interrupt_count = 0;
1661
1662 dev->net = net;
1663 strcpy (net->name, "usb%d");
1664 memcpy (net->dev_addr, node_id, sizeof node_id);
1665
1666 /* rx and tx sides can use different message sizes;
1667 * bind() should set rx_urb_size in that case.
1668 */
1669 dev->hard_mtu = net->mtu + net->hard_header_len;
1670 net->min_mtu = 0;
1671 net->max_mtu = ETH_MAX_MTU;
1672
1673 net->netdev_ops = &usbnet_netdev_ops;
1674 net->watchdog_timeo = TX_TIMEOUT_JIFFIES;
1675 net->ethtool_ops = &usbnet_ethtool_ops;
1676
1677 // allow device-specific bind/init procedures
1678 // NOTE net->name still not usable ...
1679 if (info->bind) {
1680 status = info->bind (dev, udev);
1681 if (status < 0)
1682 goto out1;
1683
1684 // heuristic: "usb%d" for links we know are two-host,
1685 // else "eth%d" when there's reasonable doubt. userspace
1686 // can rename the link if it knows better.
1687 if ((dev->driver_info->flags & FLAG_ETHER) != 0 &&
1688 ((dev->driver_info->flags & FLAG_POINTTOPOINT) == 0 ||
1689 (net->dev_addr [0] & 0x02) == 0))
1690 strcpy (net->name, "eth%d");
1691 /* WLAN devices should always be named "wlan%d" */
1692 if ((dev->driver_info->flags & FLAG_WLAN) != 0)
1693 strcpy(net->name, "wlan%d");
1694 /* WWAN devices should always be named "wwan%d" */
1695 if ((dev->driver_info->flags & FLAG_WWAN) != 0)
1696 strcpy(net->name, "wwan%d");
1697
1698 /* devices that cannot do ARP */
1699 if ((dev->driver_info->flags & FLAG_NOARP) != 0)
1700 net->flags |= IFF_NOARP;
1701
1702 /* maybe the remote can't receive an Ethernet MTU */
1703 if (net->mtu > (dev->hard_mtu - net->hard_header_len))
1704 net->mtu = dev->hard_mtu - net->hard_header_len;
1705 } else if (!info->in || !info->out)
1706 status = usbnet_get_endpoints (dev, udev);
1707 else {
1708 dev->in = usb_rcvbulkpipe (xdev, info->in);
1709 dev->out = usb_sndbulkpipe (xdev, info->out);
1710 if (!(info->flags & FLAG_NO_SETINT))
1711 status = usb_set_interface (xdev,
1712 interface->desc.bInterfaceNumber,
1713 interface->desc.bAlternateSetting);
1714 else
1715 status = 0;
1716
1717 }
1718 if (status >= 0 && dev->status)
1719 status = init_status (dev, udev);
1720 if (status < 0)
1721 goto out3;
1722
1723 if (!dev->rx_urb_size)
1724 dev->rx_urb_size = dev->hard_mtu;
1725 dev->maxpacket = usb_maxpacket (dev->udev, dev->out, 1);
1726
1727 /* let userspace know we have a random address */
1728 if (ether_addr_equal(net->dev_addr, node_id))
1729 net->addr_assign_type = NET_ADDR_RANDOM;
1730
1731 if ((dev->driver_info->flags & FLAG_WLAN) != 0)
1732 SET_NETDEV_DEVTYPE(net, &wlan_type);
1733 if ((dev->driver_info->flags & FLAG_WWAN) != 0)
1734 SET_NETDEV_DEVTYPE(net, &wwan_type);
1735
1736 /* initialize max rx_qlen and tx_qlen */
1737 usbnet_update_max_qlen(dev);
1738
1739 if (dev->can_dma_sg && !(info->flags & FLAG_SEND_ZLP) &&
1740 !(info->flags & FLAG_MULTI_PACKET)) {
1741 dev->padding_pkt = kzalloc(1, GFP_KERNEL);
1742 if (!dev->padding_pkt) {
1743 status = -ENOMEM;
1744 goto out4;
1745 }
1746 }
1747
1748 status = register_netdev (net);
1749 if (status)
1750 goto out5;
1751 netif_info(dev, probe, dev->net,
1752 "register '%s' at usb-%s-%s, %s, %pM\n",
1753 udev->dev.driver->name,
1754 xdev->bus->bus_name, xdev->devpath,
1755 dev->driver_info->description,
1756 net->dev_addr);
1757
1758 // ok, it's ready to go.
1759 usb_set_intfdata (udev, dev);
1760
1761 netif_device_attach (net);
1762
1763 if (dev->driver_info->flags & FLAG_LINK_INTR)
1764 usbnet_link_change(dev, 0, 0);
1765
1766 return 0;
1767
1768out5:
1769 kfree(dev->padding_pkt);
1770out4:
1771 usb_free_urb(dev->interrupt);
1772out3:
1773 if (info->unbind)
1774 info->unbind (dev, udev);
1775out1:
1776 /* subdrivers must undo all they did in bind() if they
1777 * fail it, but we may fail later and a deferred kevent
1778 * may trigger an error resubmitting itself and, worse,
1779 * schedule a timer. So we kill it all just in case.
1780 */
1781 cancel_work_sync(&dev->kevent);
1782 del_timer_sync(&dev->delay);
1783 free_netdev(net);
1784out:
1785 return status;
1786}
1787EXPORT_SYMBOL_GPL(usbnet_probe);
1788
1789/*-------------------------------------------------------------------------*/
1790
1791/*
1792 * suspend the whole driver as soon as the first interface is suspended
1793 * resume only when the last interface is resumed
1794 */
1795
1796int usbnet_suspend (struct usb_interface *intf, pm_message_t message)
1797{
1798 struct usbnet *dev = usb_get_intfdata(intf);
1799
1800 if (!dev->suspend_count++) {
1801 spin_lock_irq(&dev->txq.lock);
1802 /* don't autosuspend while transmitting */
1803 if (dev->txq.qlen && PMSG_IS_AUTO(message)) {
1804 dev->suspend_count--;
1805 spin_unlock_irq(&dev->txq.lock);
1806 return -EBUSY;
1807 } else {
1808 set_bit(EVENT_DEV_ASLEEP, &dev->flags);
1809 spin_unlock_irq(&dev->txq.lock);
1810 }
1811 /*
1812 * accelerate emptying of the rx and queues, to avoid
1813 * having everything error out.
1814 */
1815 netif_device_detach (dev->net);
1816 usbnet_terminate_urbs(dev);
1817 __usbnet_status_stop_force(dev);
1818
1819 /*
1820 * reattach so runtime management can use and
1821 * wake the device
1822 */
1823 netif_device_attach (dev->net);
1824 }
1825 return 0;
1826}
1827EXPORT_SYMBOL_GPL(usbnet_suspend);
1828
1829int usbnet_resume (struct usb_interface *intf)
1830{
1831 struct usbnet *dev = usb_get_intfdata(intf);
1832 struct sk_buff *skb;
1833 struct urb *res;
1834 int retval;
1835
1836 if (!--dev->suspend_count) {
1837 /* resume interrupt URB if it was previously submitted */
1838 __usbnet_status_start_force(dev, GFP_NOIO);
1839
1840 spin_lock_irq(&dev->txq.lock);
1841 while ((res = usb_get_from_anchor(&dev->deferred))) {
1842
1843 skb = (struct sk_buff *)res->context;
1844 retval = usb_submit_urb(res, GFP_ATOMIC);
1845 if (retval < 0) {
1846 dev_kfree_skb_any(skb);
1847 kfree(res->sg);
1848 usb_free_urb(res);
1849 usb_autopm_put_interface_async(dev->intf);
1850 } else {
1851 netif_trans_update(dev->net);
1852 __skb_queue_tail(&dev->txq, skb);
1853 }
1854 }
1855
1856 smp_mb();
1857 clear_bit(EVENT_DEV_ASLEEP, &dev->flags);
1858 spin_unlock_irq(&dev->txq.lock);
1859
1860 if (test_bit(EVENT_DEV_OPEN, &dev->flags)) {
1861 /* handle remote wakeup ASAP
1862 * we cannot race against stop
1863 */
1864 if (netif_device_present(dev->net) &&
1865 !timer_pending(&dev->delay) &&
1866 !test_bit(EVENT_RX_HALT, &dev->flags))
1867 rx_alloc_submit(dev, GFP_NOIO);
1868
1869 if (!(dev->txq.qlen >= TX_QLEN(dev)))
1870 netif_tx_wake_all_queues(dev->net);
1871 tasklet_schedule (&dev->bh);
1872 }
1873 }
1874
1875 if (test_and_clear_bit(EVENT_DEVICE_REPORT_IDLE, &dev->flags))
1876 usb_autopm_get_interface_no_resume(intf);
1877
1878 return 0;
1879}
1880EXPORT_SYMBOL_GPL(usbnet_resume);
1881
1882/*
1883 * Either a subdriver implements manage_power, then it is assumed to always
1884 * be ready to be suspended or it reports the readiness to be suspended
1885 * explicitly
1886 */
1887void usbnet_device_suggests_idle(struct usbnet *dev)
1888{
1889 if (!test_and_set_bit(EVENT_DEVICE_REPORT_IDLE, &dev->flags)) {
1890 dev->intf->needs_remote_wakeup = 1;
1891 usb_autopm_put_interface_async(dev->intf);
1892 }
1893}
1894EXPORT_SYMBOL(usbnet_device_suggests_idle);
1895
1896/*
1897 * For devices that can do without special commands
1898 */
1899int usbnet_manage_power(struct usbnet *dev, int on)
1900{
1901 dev->intf->needs_remote_wakeup = on;
1902 return 0;
1903}
1904EXPORT_SYMBOL(usbnet_manage_power);
1905
1906void usbnet_link_change(struct usbnet *dev, bool link, bool need_reset)
1907{
1908 /* update link after link is reseted */
1909 if (link && !need_reset)
1910 netif_carrier_on(dev->net);
1911 else
1912 netif_carrier_off(dev->net);
1913
1914 if (need_reset && link)
1915 usbnet_defer_kevent(dev, EVENT_LINK_RESET);
1916 else
1917 usbnet_defer_kevent(dev, EVENT_LINK_CHANGE);
1918}
1919EXPORT_SYMBOL(usbnet_link_change);
1920
1921/*-------------------------------------------------------------------------*/
1922static int __usbnet_read_cmd(struct usbnet *dev, u8 cmd, u8 reqtype,
1923 u16 value, u16 index, void *data, u16 size)
1924{
1925 void *buf = NULL;
1926 int err = -ENOMEM;
1927
1928 netdev_dbg(dev->net, "usbnet_read_cmd cmd=0x%02x reqtype=%02x"
1929 " value=0x%04x index=0x%04x size=%d\n",
1930 cmd, reqtype, value, index, size);
1931
1932 if (data) {
1933 buf = kmalloc(size, GFP_KERNEL);
1934 if (!buf)
1935 goto out;
1936 }
1937
1938 err = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0),
1939 cmd, reqtype, value, index, buf, size,
1940 USB_CTRL_GET_TIMEOUT);
1941 if (err > 0 && err <= size)
1942 memcpy(data, buf, err);
1943 kfree(buf);
1944out:
1945 return err;
1946}
1947
1948static int __usbnet_write_cmd(struct usbnet *dev, u8 cmd, u8 reqtype,
1949 u16 value, u16 index, const void *data,
1950 u16 size)
1951{
1952 void *buf = NULL;
1953 int err = -ENOMEM;
1954
1955 netdev_dbg(dev->net, "usbnet_write_cmd cmd=0x%02x reqtype=%02x"
1956 " value=0x%04x index=0x%04x size=%d\n",
1957 cmd, reqtype, value, index, size);
1958
1959 if (data) {
1960 buf = kmemdup(data, size, GFP_KERNEL);
1961 if (!buf)
1962 goto out;
1963 }
1964
1965 err = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0),
1966 cmd, reqtype, value, index, buf, size,
1967 USB_CTRL_SET_TIMEOUT);
1968 kfree(buf);
1969
1970out:
1971 return err;
1972}
1973
1974/*
1975 * The function can't be called inside suspend/resume callback,
1976 * otherwise deadlock will be caused.
1977 */
1978int usbnet_read_cmd(struct usbnet *dev, u8 cmd, u8 reqtype,
1979 u16 value, u16 index, void *data, u16 size)
1980{
1981 int ret;
1982
1983 if (usb_autopm_get_interface(dev->intf) < 0)
1984 return -ENODEV;
1985 ret = __usbnet_read_cmd(dev, cmd, reqtype, value, index,
1986 data, size);
1987 usb_autopm_put_interface(dev->intf);
1988 return ret;
1989}
1990EXPORT_SYMBOL_GPL(usbnet_read_cmd);
1991
1992/*
1993 * The function can't be called inside suspend/resume callback,
1994 * otherwise deadlock will be caused.
1995 */
1996int usbnet_write_cmd(struct usbnet *dev, u8 cmd, u8 reqtype,
1997 u16 value, u16 index, const void *data, u16 size)
1998{
1999 int ret;
2000
2001 if (usb_autopm_get_interface(dev->intf) < 0)
2002 return -ENODEV;
2003 ret = __usbnet_write_cmd(dev, cmd, reqtype, value, index,
2004 data, size);
2005 usb_autopm_put_interface(dev->intf);
2006 return ret;
2007}
2008EXPORT_SYMBOL_GPL(usbnet_write_cmd);
2009
2010/*
2011 * The function can be called inside suspend/resume callback safely
2012 * and should only be called by suspend/resume callback generally.
2013 */
2014int usbnet_read_cmd_nopm(struct usbnet *dev, u8 cmd, u8 reqtype,
2015 u16 value, u16 index, void *data, u16 size)
2016{
2017 return __usbnet_read_cmd(dev, cmd, reqtype, value, index,
2018 data, size);
2019}
2020EXPORT_SYMBOL_GPL(usbnet_read_cmd_nopm);
2021
2022/*
2023 * The function can be called inside suspend/resume callback safely
2024 * and should only be called by suspend/resume callback generally.
2025 */
2026int usbnet_write_cmd_nopm(struct usbnet *dev, u8 cmd, u8 reqtype,
2027 u16 value, u16 index, const void *data,
2028 u16 size)
2029{
2030 return __usbnet_write_cmd(dev, cmd, reqtype, value, index,
2031 data, size);
2032}
2033EXPORT_SYMBOL_GPL(usbnet_write_cmd_nopm);
2034
2035static void usbnet_async_cmd_cb(struct urb *urb)
2036{
2037 struct usb_ctrlrequest *req = (struct usb_ctrlrequest *)urb->context;
2038 int status = urb->status;
2039
2040 if (status < 0)
2041 dev_dbg(&urb->dev->dev, "%s failed with %d",
2042 __func__, status);
2043
2044 kfree(req);
2045 usb_free_urb(urb);
2046}
2047
2048/*
2049 * The caller must make sure that device can't be put into suspend
2050 * state until the control URB completes.
2051 */
2052int usbnet_write_cmd_async(struct usbnet *dev, u8 cmd, u8 reqtype,
2053 u16 value, u16 index, const void *data, u16 size)
2054{
2055 struct usb_ctrlrequest *req = NULL;
2056 struct urb *urb;
2057 int err = -ENOMEM;
2058 void *buf = NULL;
2059
2060 netdev_dbg(dev->net, "usbnet_write_cmd cmd=0x%02x reqtype=%02x"
2061 " value=0x%04x index=0x%04x size=%d\n",
2062 cmd, reqtype, value, index, size);
2063
2064 urb = usb_alloc_urb(0, GFP_ATOMIC);
2065 if (!urb)
2066 goto fail;
2067
2068 if (data) {
2069 buf = kmemdup(data, size, GFP_ATOMIC);
2070 if (!buf) {
2071 netdev_err(dev->net, "Error allocating buffer"
2072 " in %s!\n", __func__);
2073 goto fail_free;
2074 }
2075 }
2076
2077 req = kmalloc(sizeof(struct usb_ctrlrequest), GFP_ATOMIC);
2078 if (!req)
2079 goto fail_free_buf;
2080
2081 req->bRequestType = reqtype;
2082 req->bRequest = cmd;
2083 req->wValue = cpu_to_le16(value);
2084 req->wIndex = cpu_to_le16(index);
2085 req->wLength = cpu_to_le16(size);
2086
2087 usb_fill_control_urb(urb, dev->udev,
2088 usb_sndctrlpipe(dev->udev, 0),
2089 (void *)req, buf, size,
2090 usbnet_async_cmd_cb, req);
2091 urb->transfer_flags |= URB_FREE_BUFFER;
2092
2093 err = usb_submit_urb(urb, GFP_ATOMIC);
2094 if (err < 0) {
2095 netdev_err(dev->net, "Error submitting the control"
2096 " message: status=%d\n", err);
2097 goto fail_free;
2098 }
2099 return 0;
2100
2101fail_free_buf:
2102 kfree(buf);
2103fail_free:
2104 kfree(req);
2105 usb_free_urb(urb);
2106fail:
2107 return err;
2108
2109}
2110EXPORT_SYMBOL_GPL(usbnet_write_cmd_async);
2111/*-------------------------------------------------------------------------*/
2112
2113static int __init usbnet_init(void)
2114{
2115 /* Compiler should optimize this out. */
2116 BUILD_BUG_ON(
2117 FIELD_SIZEOF(struct sk_buff, cb) < sizeof(struct skb_data));
2118
2119 eth_random_addr(node_id);
2120 return 0;
2121}
2122module_init(usbnet_init);
2123
2124static void __exit usbnet_exit(void)
2125{
2126}
2127module_exit(usbnet_exit);
2128
2129MODULE_AUTHOR("David Brownell");
2130MODULE_DESCRIPTION("USB network driver framework");
2131MODULE_LICENSE("GPL");