Loading...
1/*
2 * sun4i_can.c - CAN bus controller driver for Allwinner SUN4I&SUN7I based SoCs
3 *
4 * Copyright (C) 2013 Peter Chen
5 * Copyright (C) 2015 Gerhard Bertelsmann
6 * All rights reserved.
7 *
8 * Parts of this software are based on (derived from) the SJA1000 code by:
9 * Copyright (C) 2014 Oliver Hartkopp <oliver.hartkopp@volkswagen.de>
10 * Copyright (C) 2007 Wolfgang Grandegger <wg@grandegger.com>
11 * Copyright (C) 2002-2007 Volkswagen Group Electronic Research
12 * Copyright (C) 2003 Matthias Brukner, Trajet Gmbh, Rebenring 33,
13 * 38106 Braunschweig, GERMANY
14 *
15 * Redistribution and use in source and binary forms, with or without
16 * modification, are permitted provided that the following conditions
17 * are met:
18 * 1. Redistributions of source code must retain the above copyright
19 * notice, this list of conditions and the following disclaimer.
20 * 2. Redistributions in binary form must reproduce the above copyright
21 * notice, this list of conditions and the following disclaimer in the
22 * documentation and/or other materials provided with the distribution.
23 * 3. Neither the name of Volkswagen nor the names of its contributors
24 * may be used to endorse or promote products derived from this software
25 * without specific prior written permission.
26 *
27 * Alternatively, provided that this notice is retained in full, this
28 * software may be distributed under the terms of the GNU General
29 * Public License ("GPL") version 2, in which case the provisions of the
30 * GPL apply INSTEAD OF those given above.
31 *
32 * The provided data structures and external interfaces from this code
33 * are not restricted to be used by modules with a GPL compatible license.
34 *
35 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
36 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
37 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
38 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
39 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
40 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
41 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
42 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
43 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
44 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
45 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
46 * DAMAGE.
47 *
48 */
49
50#include <linux/netdevice.h>
51#include <linux/can.h>
52#include <linux/can/dev.h>
53#include <linux/can/error.h>
54#include <linux/clk.h>
55#include <linux/delay.h>
56#include <linux/ethtool.h>
57#include <linux/interrupt.h>
58#include <linux/init.h>
59#include <linux/io.h>
60#include <linux/module.h>
61#include <linux/of.h>
62#include <linux/platform_device.h>
63#include <linux/reset.h>
64
65#define DRV_NAME "sun4i_can"
66
67/* Registers address (physical base address 0x01C2BC00) */
68#define SUN4I_REG_MSEL_ADDR 0x0000 /* CAN Mode Select */
69#define SUN4I_REG_CMD_ADDR 0x0004 /* CAN Command */
70#define SUN4I_REG_STA_ADDR 0x0008 /* CAN Status */
71#define SUN4I_REG_INT_ADDR 0x000c /* CAN Interrupt Flag */
72#define SUN4I_REG_INTEN_ADDR 0x0010 /* CAN Interrupt Enable */
73#define SUN4I_REG_BTIME_ADDR 0x0014 /* CAN Bus Timing 0 */
74#define SUN4I_REG_TEWL_ADDR 0x0018 /* CAN Tx Error Warning Limit */
75#define SUN4I_REG_ERRC_ADDR 0x001c /* CAN Error Counter */
76#define SUN4I_REG_RMCNT_ADDR 0x0020 /* CAN Receive Message Counter */
77#define SUN4I_REG_RBUFSA_ADDR 0x0024 /* CAN Receive Buffer Start Address */
78#define SUN4I_REG_BUF0_ADDR 0x0040 /* CAN Tx/Rx Buffer 0 */
79#define SUN4I_REG_BUF1_ADDR 0x0044 /* CAN Tx/Rx Buffer 1 */
80#define SUN4I_REG_BUF2_ADDR 0x0048 /* CAN Tx/Rx Buffer 2 */
81#define SUN4I_REG_BUF3_ADDR 0x004c /* CAN Tx/Rx Buffer 3 */
82#define SUN4I_REG_BUF4_ADDR 0x0050 /* CAN Tx/Rx Buffer 4 */
83#define SUN4I_REG_BUF5_ADDR 0x0054 /* CAN Tx/Rx Buffer 5 */
84#define SUN4I_REG_BUF6_ADDR 0x0058 /* CAN Tx/Rx Buffer 6 */
85#define SUN4I_REG_BUF7_ADDR 0x005c /* CAN Tx/Rx Buffer 7 */
86#define SUN4I_REG_BUF8_ADDR 0x0060 /* CAN Tx/Rx Buffer 8 */
87#define SUN4I_REG_BUF9_ADDR 0x0064 /* CAN Tx/Rx Buffer 9 */
88#define SUN4I_REG_BUF10_ADDR 0x0068 /* CAN Tx/Rx Buffer 10 */
89#define SUN4I_REG_BUF11_ADDR 0x006c /* CAN Tx/Rx Buffer 11 */
90#define SUN4I_REG_BUF12_ADDR 0x0070 /* CAN Tx/Rx Buffer 12 */
91#define SUN4I_REG_ACPC_ADDR 0x0040 /* CAN Acceptance Code 0 */
92#define SUN4I_REG_ACPM_ADDR 0x0044 /* CAN Acceptance Mask 0 */
93#define SUN4I_REG_ACPC_ADDR_D1 0x0028 /* CAN Acceptance Code 0 on the D1 */
94#define SUN4I_REG_ACPM_ADDR_D1 0x002C /* CAN Acceptance Mask 0 on the D1 */
95#define SUN4I_REG_RBUF_RBACK_START_ADDR 0x0180 /* CAN transmit buffer start */
96#define SUN4I_REG_RBUF_RBACK_END_ADDR 0x01b0 /* CAN transmit buffer end */
97
98/* Controller Register Description */
99
100/* mode select register (r/w)
101 * offset:0x0000 default:0x0000_0001
102 */
103#define SUN4I_MSEL_SLEEP_MODE (0x01 << 4) /* write in reset mode */
104#define SUN4I_MSEL_WAKE_UP (0x00 << 4)
105#define SUN4I_MSEL_SINGLE_FILTER (0x01 << 3) /* write in reset mode */
106#define SUN4I_MSEL_DUAL_FILTERS (0x00 << 3)
107#define SUN4I_MSEL_LOOPBACK_MODE BIT(2)
108#define SUN4I_MSEL_LISTEN_ONLY_MODE BIT(1)
109#define SUN4I_MSEL_RESET_MODE BIT(0)
110
111/* command register (w)
112 * offset:0x0004 default:0x0000_0000
113 */
114#define SUN4I_CMD_BUS_OFF_REQ BIT(5)
115#define SUN4I_CMD_SELF_RCV_REQ BIT(4)
116#define SUN4I_CMD_CLEAR_OR_FLAG BIT(3)
117#define SUN4I_CMD_RELEASE_RBUF BIT(2)
118#define SUN4I_CMD_ABORT_REQ BIT(1)
119#define SUN4I_CMD_TRANS_REQ BIT(0)
120
121/* status register (r)
122 * offset:0x0008 default:0x0000_003c
123 */
124#define SUN4I_STA_BIT_ERR (0x00 << 22)
125#define SUN4I_STA_FORM_ERR (0x01 << 22)
126#define SUN4I_STA_STUFF_ERR (0x02 << 22)
127#define SUN4I_STA_OTHER_ERR (0x03 << 22)
128#define SUN4I_STA_MASK_ERR (0x03 << 22)
129#define SUN4I_STA_ERR_DIR BIT(21)
130#define SUN4I_STA_ERR_SEG_CODE (0x1f << 16)
131#define SUN4I_STA_START (0x03 << 16)
132#define SUN4I_STA_ID28_21 (0x02 << 16)
133#define SUN4I_STA_ID20_18 (0x06 << 16)
134#define SUN4I_STA_SRTR (0x04 << 16)
135#define SUN4I_STA_IDE (0x05 << 16)
136#define SUN4I_STA_ID17_13 (0x07 << 16)
137#define SUN4I_STA_ID12_5 (0x0f << 16)
138#define SUN4I_STA_ID4_0 (0x0e << 16)
139#define SUN4I_STA_RTR (0x0c << 16)
140#define SUN4I_STA_RB1 (0x0d << 16)
141#define SUN4I_STA_RB0 (0x09 << 16)
142#define SUN4I_STA_DLEN (0x0b << 16)
143#define SUN4I_STA_DATA_FIELD (0x0a << 16)
144#define SUN4I_STA_CRC_SEQUENCE (0x08 << 16)
145#define SUN4I_STA_CRC_DELIMITER (0x18 << 16)
146#define SUN4I_STA_ACK (0x19 << 16)
147#define SUN4I_STA_ACK_DELIMITER (0x1b << 16)
148#define SUN4I_STA_END (0x1a << 16)
149#define SUN4I_STA_INTERMISSION (0x12 << 16)
150#define SUN4I_STA_ACTIVE_ERROR (0x11 << 16)
151#define SUN4I_STA_PASSIVE_ERROR (0x16 << 16)
152#define SUN4I_STA_TOLERATE_DOMINANT_BITS (0x13 << 16)
153#define SUN4I_STA_ERROR_DELIMITER (0x17 << 16)
154#define SUN4I_STA_OVERLOAD (0x1c << 16)
155#define SUN4I_STA_BUS_OFF BIT(7)
156#define SUN4I_STA_ERR_STA BIT(6)
157#define SUN4I_STA_TRANS_BUSY BIT(5)
158#define SUN4I_STA_RCV_BUSY BIT(4)
159#define SUN4I_STA_TRANS_OVER BIT(3)
160#define SUN4I_STA_TBUF_RDY BIT(2)
161#define SUN4I_STA_DATA_ORUN BIT(1)
162#define SUN4I_STA_RBUF_RDY BIT(0)
163
164/* interrupt register (r)
165 * offset:0x000c default:0x0000_0000
166 */
167#define SUN4I_INT_BUS_ERR BIT(7)
168#define SUN4I_INT_ARB_LOST BIT(6)
169#define SUN4I_INT_ERR_PASSIVE BIT(5)
170#define SUN4I_INT_WAKEUP BIT(4)
171#define SUN4I_INT_DATA_OR BIT(3)
172#define SUN4I_INT_ERR_WRN BIT(2)
173#define SUN4I_INT_TBUF_VLD BIT(1)
174#define SUN4I_INT_RBUF_VLD BIT(0)
175
176/* interrupt enable register (r/w)
177 * offset:0x0010 default:0x0000_0000
178 */
179#define SUN4I_INTEN_BERR BIT(7)
180#define SUN4I_INTEN_ARB_LOST BIT(6)
181#define SUN4I_INTEN_ERR_PASSIVE BIT(5)
182#define SUN4I_INTEN_WAKEUP BIT(4)
183#define SUN4I_INTEN_OR BIT(3)
184#define SUN4I_INTEN_ERR_WRN BIT(2)
185#define SUN4I_INTEN_TX BIT(1)
186#define SUN4I_INTEN_RX BIT(0)
187
188/* error code */
189#define SUN4I_ERR_INRCV (0x1 << 5)
190#define SUN4I_ERR_INTRANS (0x0 << 5)
191
192/* filter mode */
193#define SUN4I_FILTER_CLOSE 0
194#define SUN4I_SINGLE_FLTER_MODE 1
195#define SUN4I_DUAL_FILTER_MODE 2
196
197/* message buffer flags */
198#define SUN4I_MSG_EFF_FLAG BIT(7)
199#define SUN4I_MSG_RTR_FLAG BIT(6)
200
201/* max. number of interrupts handled in ISR */
202#define SUN4I_CAN_MAX_IRQ 20
203#define SUN4I_MODE_MAX_RETRIES 100
204
205/**
206 * struct sun4ican_quirks - Differences between SoC variants.
207 *
208 * @has_reset: SoC needs reset deasserted.
209 * @acp_offset: Offset of ACPC and ACPM registers
210 */
211struct sun4ican_quirks {
212 bool has_reset;
213 int acp_offset;
214};
215
216struct sun4ican_priv {
217 struct can_priv can;
218 void __iomem *base;
219 struct clk *clk;
220 struct reset_control *reset;
221 spinlock_t cmdreg_lock; /* lock for concurrent cmd register writes */
222 int acp_offset;
223};
224
225static const struct can_bittiming_const sun4ican_bittiming_const = {
226 .name = DRV_NAME,
227 .tseg1_min = 1,
228 .tseg1_max = 16,
229 .tseg2_min = 1,
230 .tseg2_max = 8,
231 .sjw_max = 4,
232 .brp_min = 1,
233 .brp_max = 64,
234 .brp_inc = 1,
235};
236
237static void sun4i_can_write_cmdreg(struct sun4ican_priv *priv, u8 val)
238{
239 unsigned long flags;
240
241 spin_lock_irqsave(&priv->cmdreg_lock, flags);
242 writel(val, priv->base + SUN4I_REG_CMD_ADDR);
243 spin_unlock_irqrestore(&priv->cmdreg_lock, flags);
244}
245
246static int set_normal_mode(struct net_device *dev)
247{
248 struct sun4ican_priv *priv = netdev_priv(dev);
249 int retry = SUN4I_MODE_MAX_RETRIES;
250 u32 mod_reg_val = 0;
251
252 do {
253 mod_reg_val = readl(priv->base + SUN4I_REG_MSEL_ADDR);
254 mod_reg_val &= ~SUN4I_MSEL_RESET_MODE;
255 writel(mod_reg_val, priv->base + SUN4I_REG_MSEL_ADDR);
256 } while (retry-- && (mod_reg_val & SUN4I_MSEL_RESET_MODE));
257
258 if (readl(priv->base + SUN4I_REG_MSEL_ADDR) & SUN4I_MSEL_RESET_MODE) {
259 netdev_err(dev,
260 "setting controller into normal mode failed!\n");
261 return -ETIMEDOUT;
262 }
263
264 return 0;
265}
266
267static int set_reset_mode(struct net_device *dev)
268{
269 struct sun4ican_priv *priv = netdev_priv(dev);
270 int retry = SUN4I_MODE_MAX_RETRIES;
271 u32 mod_reg_val = 0;
272
273 do {
274 mod_reg_val = readl(priv->base + SUN4I_REG_MSEL_ADDR);
275 mod_reg_val |= SUN4I_MSEL_RESET_MODE;
276 writel(mod_reg_val, priv->base + SUN4I_REG_MSEL_ADDR);
277 } while (retry-- && !(mod_reg_val & SUN4I_MSEL_RESET_MODE));
278
279 if (!(readl(priv->base + SUN4I_REG_MSEL_ADDR) &
280 SUN4I_MSEL_RESET_MODE)) {
281 netdev_err(dev, "setting controller into reset mode failed!\n");
282 return -ETIMEDOUT;
283 }
284
285 return 0;
286}
287
288/* bittiming is called in reset_mode only */
289static int sun4ican_set_bittiming(struct net_device *dev)
290{
291 struct sun4ican_priv *priv = netdev_priv(dev);
292 struct can_bittiming *bt = &priv->can.bittiming;
293 u32 cfg;
294
295 cfg = ((bt->brp - 1) & 0x3FF) |
296 (((bt->sjw - 1) & 0x3) << 14) |
297 (((bt->prop_seg + bt->phase_seg1 - 1) & 0xf) << 16) |
298 (((bt->phase_seg2 - 1) & 0x7) << 20);
299 if (priv->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES)
300 cfg |= 0x800000;
301
302 netdev_dbg(dev, "setting BITTIMING=0x%08x\n", cfg);
303 writel(cfg, priv->base + SUN4I_REG_BTIME_ADDR);
304
305 return 0;
306}
307
308static int sun4ican_get_berr_counter(const struct net_device *dev,
309 struct can_berr_counter *bec)
310{
311 struct sun4ican_priv *priv = netdev_priv(dev);
312 u32 errors;
313 int err;
314
315 err = clk_prepare_enable(priv->clk);
316 if (err) {
317 netdev_err(dev, "could not enable clock\n");
318 return err;
319 }
320
321 errors = readl(priv->base + SUN4I_REG_ERRC_ADDR);
322
323 bec->txerr = errors & 0xFF;
324 bec->rxerr = (errors >> 16) & 0xFF;
325
326 clk_disable_unprepare(priv->clk);
327
328 return 0;
329}
330
331static int sun4i_can_start(struct net_device *dev)
332{
333 struct sun4ican_priv *priv = netdev_priv(dev);
334 int err;
335 u32 mod_reg_val;
336
337 /* we need to enter the reset mode */
338 err = set_reset_mode(dev);
339 if (err) {
340 netdev_err(dev, "could not enter reset mode\n");
341 return err;
342 }
343
344 /* set filters - we accept all */
345 writel(0x00000000, priv->base + SUN4I_REG_ACPC_ADDR + priv->acp_offset);
346 writel(0xFFFFFFFF, priv->base + SUN4I_REG_ACPM_ADDR + priv->acp_offset);
347
348 /* clear error counters and error code capture */
349 writel(0, priv->base + SUN4I_REG_ERRC_ADDR);
350
351 /* enable interrupts */
352 if (priv->can.ctrlmode & CAN_CTRLMODE_BERR_REPORTING)
353 writel(0xFF, priv->base + SUN4I_REG_INTEN_ADDR);
354 else
355 writel(0xFF & ~SUN4I_INTEN_BERR,
356 priv->base + SUN4I_REG_INTEN_ADDR);
357
358 /* enter the selected mode */
359 mod_reg_val = readl(priv->base + SUN4I_REG_MSEL_ADDR);
360 if (priv->can.ctrlmode & CAN_CTRLMODE_LOOPBACK)
361 mod_reg_val |= SUN4I_MSEL_LOOPBACK_MODE;
362 else if (priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY)
363 mod_reg_val |= SUN4I_MSEL_LISTEN_ONLY_MODE;
364 writel(mod_reg_val, priv->base + SUN4I_REG_MSEL_ADDR);
365
366 err = sun4ican_set_bittiming(dev);
367 if (err)
368 return err;
369
370 /* we are ready to enter the normal mode */
371 err = set_normal_mode(dev);
372 if (err) {
373 netdev_err(dev, "could not enter normal mode\n");
374 return err;
375 }
376
377 priv->can.state = CAN_STATE_ERROR_ACTIVE;
378
379 return 0;
380}
381
382static int sun4i_can_stop(struct net_device *dev)
383{
384 struct sun4ican_priv *priv = netdev_priv(dev);
385 int err;
386
387 priv->can.state = CAN_STATE_STOPPED;
388 /* we need to enter reset mode */
389 err = set_reset_mode(dev);
390 if (err) {
391 netdev_err(dev, "could not enter reset mode\n");
392 return err;
393 }
394
395 /* disable all interrupts */
396 writel(0, priv->base + SUN4I_REG_INTEN_ADDR);
397
398 return 0;
399}
400
401static int sun4ican_set_mode(struct net_device *dev, enum can_mode mode)
402{
403 int err;
404
405 switch (mode) {
406 case CAN_MODE_START:
407 err = sun4i_can_start(dev);
408 if (err) {
409 netdev_err(dev, "starting CAN controller failed!\n");
410 return err;
411 }
412 if (netif_queue_stopped(dev))
413 netif_wake_queue(dev);
414 break;
415
416 default:
417 return -EOPNOTSUPP;
418 }
419 return 0;
420}
421
422/* transmit a CAN message
423 * message layout in the sk_buff should be like this:
424 * xx xx xx xx ff ll 00 11 22 33 44 55 66 77
425 * [ can_id ] [flags] [len] [can data (up to 8 bytes]
426 */
427static netdev_tx_t sun4ican_start_xmit(struct sk_buff *skb, struct net_device *dev)
428{
429 struct sun4ican_priv *priv = netdev_priv(dev);
430 struct can_frame *cf = (struct can_frame *)skb->data;
431 u8 dlc;
432 u32 dreg, msg_flag_n;
433 canid_t id;
434 int i;
435
436 if (can_dev_dropped_skb(dev, skb))
437 return NETDEV_TX_OK;
438
439 netif_stop_queue(dev);
440
441 id = cf->can_id;
442 dlc = cf->len;
443 msg_flag_n = dlc;
444
445 if (id & CAN_RTR_FLAG)
446 msg_flag_n |= SUN4I_MSG_RTR_FLAG;
447
448 if (id & CAN_EFF_FLAG) {
449 msg_flag_n |= SUN4I_MSG_EFF_FLAG;
450 dreg = SUN4I_REG_BUF5_ADDR;
451 writel((id >> 21) & 0xFF, priv->base + SUN4I_REG_BUF1_ADDR);
452 writel((id >> 13) & 0xFF, priv->base + SUN4I_REG_BUF2_ADDR);
453 writel((id >> 5) & 0xFF, priv->base + SUN4I_REG_BUF3_ADDR);
454 writel((id << 3) & 0xF8, priv->base + SUN4I_REG_BUF4_ADDR);
455 } else {
456 dreg = SUN4I_REG_BUF3_ADDR;
457 writel((id >> 3) & 0xFF, priv->base + SUN4I_REG_BUF1_ADDR);
458 writel((id << 5) & 0xE0, priv->base + SUN4I_REG_BUF2_ADDR);
459 }
460
461 for (i = 0; i < dlc; i++)
462 writel(cf->data[i], priv->base + (dreg + i * 4));
463
464 writel(msg_flag_n, priv->base + SUN4I_REG_BUF0_ADDR);
465
466 can_put_echo_skb(skb, dev, 0, 0);
467
468 if (priv->can.ctrlmode & CAN_CTRLMODE_LOOPBACK)
469 sun4i_can_write_cmdreg(priv, SUN4I_CMD_SELF_RCV_REQ);
470 else
471 sun4i_can_write_cmdreg(priv, SUN4I_CMD_TRANS_REQ);
472
473 return NETDEV_TX_OK;
474}
475
476static void sun4i_can_rx(struct net_device *dev)
477{
478 struct sun4ican_priv *priv = netdev_priv(dev);
479 struct net_device_stats *stats = &dev->stats;
480 struct can_frame *cf;
481 struct sk_buff *skb;
482 u8 fi;
483 u32 dreg;
484 canid_t id;
485 int i;
486
487 /* create zero'ed CAN frame buffer */
488 skb = alloc_can_skb(dev, &cf);
489 if (!skb)
490 return;
491
492 fi = readl(priv->base + SUN4I_REG_BUF0_ADDR);
493 cf->len = can_cc_dlc2len(fi & 0x0F);
494 if (fi & SUN4I_MSG_EFF_FLAG) {
495 dreg = SUN4I_REG_BUF5_ADDR;
496 id = (readl(priv->base + SUN4I_REG_BUF1_ADDR) << 21) |
497 (readl(priv->base + SUN4I_REG_BUF2_ADDR) << 13) |
498 (readl(priv->base + SUN4I_REG_BUF3_ADDR) << 5) |
499 ((readl(priv->base + SUN4I_REG_BUF4_ADDR) >> 3) & 0x1f);
500 id |= CAN_EFF_FLAG;
501 } else {
502 dreg = SUN4I_REG_BUF3_ADDR;
503 id = (readl(priv->base + SUN4I_REG_BUF1_ADDR) << 3) |
504 ((readl(priv->base + SUN4I_REG_BUF2_ADDR) >> 5) & 0x7);
505 }
506
507 /* remote frame ? */
508 if (fi & SUN4I_MSG_RTR_FLAG) {
509 id |= CAN_RTR_FLAG;
510 } else {
511 for (i = 0; i < cf->len; i++)
512 cf->data[i] = readl(priv->base + dreg + i * 4);
513
514 stats->rx_bytes += cf->len;
515 }
516 stats->rx_packets++;
517
518 cf->can_id = id;
519
520 sun4i_can_write_cmdreg(priv, SUN4I_CMD_RELEASE_RBUF);
521
522 netif_rx(skb);
523}
524
525static int sun4i_can_err(struct net_device *dev, u8 isrc, u8 status)
526{
527 struct sun4ican_priv *priv = netdev_priv(dev);
528 struct net_device_stats *stats = &dev->stats;
529 struct can_frame *cf;
530 struct sk_buff *skb;
531 enum can_state state = priv->can.state;
532 enum can_state rx_state, tx_state;
533 unsigned int rxerr, txerr, errc;
534 u32 ecc, alc;
535
536 /* we don't skip if alloc fails because we want the stats anyhow */
537 skb = alloc_can_err_skb(dev, &cf);
538
539 errc = readl(priv->base + SUN4I_REG_ERRC_ADDR);
540 rxerr = (errc >> 16) & 0xFF;
541 txerr = errc & 0xFF;
542
543 if (isrc & SUN4I_INT_DATA_OR) {
544 /* data overrun interrupt */
545 netdev_dbg(dev, "data overrun interrupt\n");
546 if (likely(skb)) {
547 cf->can_id |= CAN_ERR_CRTL;
548 cf->data[1] = CAN_ERR_CRTL_RX_OVERFLOW;
549 }
550 stats->rx_over_errors++;
551 stats->rx_errors++;
552
553 /* reset the CAN IP by entering reset mode
554 * ignoring timeout error
555 */
556 set_reset_mode(dev);
557 set_normal_mode(dev);
558
559 /* clear bit */
560 sun4i_can_write_cmdreg(priv, SUN4I_CMD_CLEAR_OR_FLAG);
561 }
562 if (isrc & SUN4I_INT_ERR_WRN) {
563 /* error warning interrupt */
564 netdev_dbg(dev, "error warning interrupt\n");
565
566 if (status & SUN4I_STA_BUS_OFF)
567 state = CAN_STATE_BUS_OFF;
568 else if (status & SUN4I_STA_ERR_STA)
569 state = CAN_STATE_ERROR_WARNING;
570 else
571 state = CAN_STATE_ERROR_ACTIVE;
572 }
573 if (skb && state != CAN_STATE_BUS_OFF) {
574 cf->can_id |= CAN_ERR_CNT;
575 cf->data[6] = txerr;
576 cf->data[7] = rxerr;
577 }
578 if (isrc & SUN4I_INT_BUS_ERR) {
579 /* bus error interrupt */
580 netdev_dbg(dev, "bus error interrupt\n");
581 priv->can.can_stats.bus_error++;
582 stats->rx_errors++;
583
584 if (likely(skb)) {
585 ecc = readl(priv->base + SUN4I_REG_STA_ADDR);
586
587 cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR;
588
589 switch (ecc & SUN4I_STA_MASK_ERR) {
590 case SUN4I_STA_BIT_ERR:
591 cf->data[2] |= CAN_ERR_PROT_BIT;
592 break;
593 case SUN4I_STA_FORM_ERR:
594 cf->data[2] |= CAN_ERR_PROT_FORM;
595 break;
596 case SUN4I_STA_STUFF_ERR:
597 cf->data[2] |= CAN_ERR_PROT_STUFF;
598 break;
599 default:
600 cf->data[3] = (ecc & SUN4I_STA_ERR_SEG_CODE)
601 >> 16;
602 break;
603 }
604 /* error occurred during transmission? */
605 if ((ecc & SUN4I_STA_ERR_DIR) == 0)
606 cf->data[2] |= CAN_ERR_PROT_TX;
607 }
608 }
609 if (isrc & SUN4I_INT_ERR_PASSIVE) {
610 /* error passive interrupt */
611 netdev_dbg(dev, "error passive interrupt\n");
612 if (state == CAN_STATE_ERROR_PASSIVE)
613 state = CAN_STATE_ERROR_WARNING;
614 else
615 state = CAN_STATE_ERROR_PASSIVE;
616 }
617 if (isrc & SUN4I_INT_ARB_LOST) {
618 /* arbitration lost interrupt */
619 netdev_dbg(dev, "arbitration lost interrupt\n");
620 alc = readl(priv->base + SUN4I_REG_STA_ADDR);
621 priv->can.can_stats.arbitration_lost++;
622 if (likely(skb)) {
623 cf->can_id |= CAN_ERR_LOSTARB;
624 cf->data[0] = (alc >> 8) & 0x1f;
625 }
626 }
627
628 if (state != priv->can.state) {
629 tx_state = txerr >= rxerr ? state : 0;
630 rx_state = txerr <= rxerr ? state : 0;
631
632 if (likely(skb))
633 can_change_state(dev, cf, tx_state, rx_state);
634 else
635 priv->can.state = state;
636 if (state == CAN_STATE_BUS_OFF)
637 can_bus_off(dev);
638 }
639
640 if (likely(skb))
641 netif_rx(skb);
642 else
643 return -ENOMEM;
644
645 return 0;
646}
647
648static irqreturn_t sun4i_can_interrupt(int irq, void *dev_id)
649{
650 struct net_device *dev = (struct net_device *)dev_id;
651 struct sun4ican_priv *priv = netdev_priv(dev);
652 struct net_device_stats *stats = &dev->stats;
653 u8 isrc, status;
654 int n = 0;
655
656 while ((isrc = readl(priv->base + SUN4I_REG_INT_ADDR)) &&
657 (n < SUN4I_CAN_MAX_IRQ)) {
658 n++;
659 status = readl(priv->base + SUN4I_REG_STA_ADDR);
660
661 if (isrc & SUN4I_INT_WAKEUP)
662 netdev_warn(dev, "wakeup interrupt\n");
663
664 if (isrc & SUN4I_INT_TBUF_VLD) {
665 /* transmission complete interrupt */
666 stats->tx_bytes += can_get_echo_skb(dev, 0, NULL);
667 stats->tx_packets++;
668 netif_wake_queue(dev);
669 }
670 if ((isrc & SUN4I_INT_RBUF_VLD) &&
671 !(isrc & SUN4I_INT_DATA_OR)) {
672 /* receive interrupt - don't read if overrun occurred */
673 while (status & SUN4I_STA_RBUF_RDY) {
674 /* RX buffer is not empty */
675 sun4i_can_rx(dev);
676 status = readl(priv->base + SUN4I_REG_STA_ADDR);
677 }
678 }
679 if (isrc &
680 (SUN4I_INT_DATA_OR | SUN4I_INT_ERR_WRN | SUN4I_INT_BUS_ERR |
681 SUN4I_INT_ERR_PASSIVE | SUN4I_INT_ARB_LOST)) {
682 /* error interrupt */
683 if (sun4i_can_err(dev, isrc, status))
684 netdev_err(dev, "can't allocate buffer - clearing pending interrupts\n");
685 }
686 /* clear interrupts */
687 writel(isrc, priv->base + SUN4I_REG_INT_ADDR);
688 readl(priv->base + SUN4I_REG_INT_ADDR);
689 }
690 if (n >= SUN4I_CAN_MAX_IRQ)
691 netdev_dbg(dev, "%d messages handled in ISR", n);
692
693 return (n) ? IRQ_HANDLED : IRQ_NONE;
694}
695
696static int sun4ican_open(struct net_device *dev)
697{
698 struct sun4ican_priv *priv = netdev_priv(dev);
699 int err;
700
701 /* common open */
702 err = open_candev(dev);
703 if (err)
704 return err;
705
706 /* register interrupt handler */
707 err = request_irq(dev->irq, sun4i_can_interrupt, 0, dev->name, dev);
708 if (err) {
709 netdev_err(dev, "request_irq err: %d\n", err);
710 goto exit_irq;
711 }
712
713 /* software reset deassert */
714 err = reset_control_deassert(priv->reset);
715 if (err) {
716 netdev_err(dev, "could not deassert CAN reset\n");
717 goto exit_soft_reset;
718 }
719
720 /* turn on clocking for CAN peripheral block */
721 err = clk_prepare_enable(priv->clk);
722 if (err) {
723 netdev_err(dev, "could not enable CAN peripheral clock\n");
724 goto exit_clock;
725 }
726
727 err = sun4i_can_start(dev);
728 if (err) {
729 netdev_err(dev, "could not start CAN peripheral\n");
730 goto exit_can_start;
731 }
732
733 netif_start_queue(dev);
734
735 return 0;
736
737exit_can_start:
738 clk_disable_unprepare(priv->clk);
739exit_clock:
740 reset_control_assert(priv->reset);
741exit_soft_reset:
742 free_irq(dev->irq, dev);
743exit_irq:
744 close_candev(dev);
745 return err;
746}
747
748static int sun4ican_close(struct net_device *dev)
749{
750 struct sun4ican_priv *priv = netdev_priv(dev);
751
752 netif_stop_queue(dev);
753 sun4i_can_stop(dev);
754 clk_disable_unprepare(priv->clk);
755 reset_control_assert(priv->reset);
756
757 free_irq(dev->irq, dev);
758 close_candev(dev);
759
760 return 0;
761}
762
763static const struct net_device_ops sun4ican_netdev_ops = {
764 .ndo_open = sun4ican_open,
765 .ndo_stop = sun4ican_close,
766 .ndo_start_xmit = sun4ican_start_xmit,
767};
768
769static const struct ethtool_ops sun4ican_ethtool_ops = {
770 .get_ts_info = ethtool_op_get_ts_info,
771};
772
773static const struct sun4ican_quirks sun4ican_quirks_a10 = {
774 .has_reset = false,
775 .acp_offset = 0,
776};
777
778static const struct sun4ican_quirks sun4ican_quirks_r40 = {
779 .has_reset = true,
780 .acp_offset = 0,
781};
782
783static const struct sun4ican_quirks sun4ican_quirks_d1 = {
784 .has_reset = true,
785 .acp_offset = (SUN4I_REG_ACPC_ADDR_D1 - SUN4I_REG_ACPC_ADDR),
786};
787
788static const struct of_device_id sun4ican_of_match[] = {
789 {
790 .compatible = "allwinner,sun4i-a10-can",
791 .data = &sun4ican_quirks_a10
792 }, {
793 .compatible = "allwinner,sun7i-a20-can",
794 .data = &sun4ican_quirks_a10
795 }, {
796 .compatible = "allwinner,sun8i-r40-can",
797 .data = &sun4ican_quirks_r40
798 }, {
799 .compatible = "allwinner,sun20i-d1-can",
800 .data = &sun4ican_quirks_d1
801 }, {
802 /* sentinel */
803 },
804};
805
806MODULE_DEVICE_TABLE(of, sun4ican_of_match);
807
808static void sun4ican_remove(struct platform_device *pdev)
809{
810 struct net_device *dev = platform_get_drvdata(pdev);
811
812 unregister_netdev(dev);
813 free_candev(dev);
814}
815
816static int sun4ican_probe(struct platform_device *pdev)
817{
818 struct device_node *np = pdev->dev.of_node;
819 struct clk *clk;
820 struct reset_control *reset = NULL;
821 void __iomem *addr;
822 int err, irq;
823 struct net_device *dev;
824 struct sun4ican_priv *priv;
825 const struct sun4ican_quirks *quirks;
826
827 quirks = of_device_get_match_data(&pdev->dev);
828 if (!quirks) {
829 dev_err(&pdev->dev, "failed to determine the quirks to use\n");
830 err = -ENODEV;
831 goto exit;
832 }
833
834 if (quirks->has_reset) {
835 reset = devm_reset_control_get_exclusive(&pdev->dev, NULL);
836 if (IS_ERR(reset)) {
837 dev_err(&pdev->dev, "unable to request reset\n");
838 err = PTR_ERR(reset);
839 goto exit;
840 }
841 }
842
843 clk = of_clk_get(np, 0);
844 if (IS_ERR(clk)) {
845 dev_err(&pdev->dev, "unable to request clock\n");
846 err = -ENODEV;
847 goto exit;
848 }
849
850 irq = platform_get_irq(pdev, 0);
851 if (irq < 0) {
852 err = -ENODEV;
853 goto exit;
854 }
855
856 addr = devm_platform_ioremap_resource(pdev, 0);
857 if (IS_ERR(addr)) {
858 err = PTR_ERR(addr);
859 goto exit;
860 }
861
862 dev = alloc_candev(sizeof(struct sun4ican_priv), 1);
863 if (!dev) {
864 dev_err(&pdev->dev,
865 "could not allocate memory for CAN device\n");
866 err = -ENOMEM;
867 goto exit;
868 }
869
870 dev->netdev_ops = &sun4ican_netdev_ops;
871 dev->ethtool_ops = &sun4ican_ethtool_ops;
872 dev->irq = irq;
873 dev->flags |= IFF_ECHO;
874
875 priv = netdev_priv(dev);
876 priv->can.clock.freq = clk_get_rate(clk);
877 priv->can.bittiming_const = &sun4ican_bittiming_const;
878 priv->can.do_set_mode = sun4ican_set_mode;
879 priv->can.do_get_berr_counter = sun4ican_get_berr_counter;
880 priv->can.ctrlmode_supported = CAN_CTRLMODE_BERR_REPORTING |
881 CAN_CTRLMODE_LISTENONLY |
882 CAN_CTRLMODE_LOOPBACK |
883 CAN_CTRLMODE_3_SAMPLES;
884 priv->base = addr;
885 priv->clk = clk;
886 priv->reset = reset;
887 priv->acp_offset = quirks->acp_offset;
888 spin_lock_init(&priv->cmdreg_lock);
889
890 platform_set_drvdata(pdev, dev);
891 SET_NETDEV_DEV(dev, &pdev->dev);
892
893 err = register_candev(dev);
894 if (err) {
895 dev_err(&pdev->dev, "registering %s failed (err=%d)\n",
896 DRV_NAME, err);
897 goto exit_free;
898 }
899
900 dev_info(&pdev->dev, "device registered (base=%p, irq=%d)\n",
901 priv->base, dev->irq);
902
903 return 0;
904
905exit_free:
906 free_candev(dev);
907exit:
908 return err;
909}
910
911static struct platform_driver sun4i_can_driver = {
912 .driver = {
913 .name = DRV_NAME,
914 .of_match_table = sun4ican_of_match,
915 },
916 .probe = sun4ican_probe,
917 .remove_new = sun4ican_remove,
918};
919
920module_platform_driver(sun4i_can_driver);
921
922MODULE_AUTHOR("Peter Chen <xingkongcp@gmail.com>");
923MODULE_AUTHOR("Gerhard Bertelsmann <info@gerhard-bertelsmann.de>");
924MODULE_LICENSE("Dual BSD/GPL");
925MODULE_DESCRIPTION("CAN driver for Allwinner SoCs (A10/A20/D1)");
1/*
2 * sun4i_can.c - CAN bus controller driver for Allwinner SUN4I&SUN7I based SoCs
3 *
4 * Copyright (C) 2013 Peter Chen
5 * Copyright (C) 2015 Gerhard Bertelsmann
6 * All rights reserved.
7 *
8 * Parts of this software are based on (derived from) the SJA1000 code by:
9 * Copyright (C) 2014 Oliver Hartkopp <oliver.hartkopp@volkswagen.de>
10 * Copyright (C) 2007 Wolfgang Grandegger <wg@grandegger.com>
11 * Copyright (C) 2002-2007 Volkswagen Group Electronic Research
12 * Copyright (C) 2003 Matthias Brukner, Trajet Gmbh, Rebenring 33,
13 * 38106 Braunschweig, GERMANY
14 *
15 * Redistribution and use in source and binary forms, with or without
16 * modification, are permitted provided that the following conditions
17 * are met:
18 * 1. Redistributions of source code must retain the above copyright
19 * notice, this list of conditions and the following disclaimer.
20 * 2. Redistributions in binary form must reproduce the above copyright
21 * notice, this list of conditions and the following disclaimer in the
22 * documentation and/or other materials provided with the distribution.
23 * 3. Neither the name of Volkswagen nor the names of its contributors
24 * may be used to endorse or promote products derived from this software
25 * without specific prior written permission.
26 *
27 * Alternatively, provided that this notice is retained in full, this
28 * software may be distributed under the terms of the GNU General
29 * Public License ("GPL") version 2, in which case the provisions of the
30 * GPL apply INSTEAD OF those given above.
31 *
32 * The provided data structures and external interfaces from this code
33 * are not restricted to be used by modules with a GPL compatible license.
34 *
35 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
36 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
37 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
38 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
39 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
40 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
41 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
42 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
43 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
44 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
45 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
46 * DAMAGE.
47 *
48 */
49
50#include <linux/netdevice.h>
51#include <linux/can.h>
52#include <linux/can/dev.h>
53#include <linux/can/error.h>
54#include <linux/can/led.h>
55#include <linux/clk.h>
56#include <linux/delay.h>
57#include <linux/interrupt.h>
58#include <linux/init.h>
59#include <linux/io.h>
60#include <linux/module.h>
61#include <linux/of.h>
62#include <linux/of_device.h>
63#include <linux/platform_device.h>
64
65#define DRV_NAME "sun4i_can"
66
67/* Registers address (physical base address 0x01C2BC00) */
68#define SUN4I_REG_MSEL_ADDR 0x0000 /* CAN Mode Select */
69#define SUN4I_REG_CMD_ADDR 0x0004 /* CAN Command */
70#define SUN4I_REG_STA_ADDR 0x0008 /* CAN Status */
71#define SUN4I_REG_INT_ADDR 0x000c /* CAN Interrupt Flag */
72#define SUN4I_REG_INTEN_ADDR 0x0010 /* CAN Interrupt Enable */
73#define SUN4I_REG_BTIME_ADDR 0x0014 /* CAN Bus Timing 0 */
74#define SUN4I_REG_TEWL_ADDR 0x0018 /* CAN Tx Error Warning Limit */
75#define SUN4I_REG_ERRC_ADDR 0x001c /* CAN Error Counter */
76#define SUN4I_REG_RMCNT_ADDR 0x0020 /* CAN Receive Message Counter */
77#define SUN4I_REG_RBUFSA_ADDR 0x0024 /* CAN Receive Buffer Start Address */
78#define SUN4I_REG_BUF0_ADDR 0x0040 /* CAN Tx/Rx Buffer 0 */
79#define SUN4I_REG_BUF1_ADDR 0x0044 /* CAN Tx/Rx Buffer 1 */
80#define SUN4I_REG_BUF2_ADDR 0x0048 /* CAN Tx/Rx Buffer 2 */
81#define SUN4I_REG_BUF3_ADDR 0x004c /* CAN Tx/Rx Buffer 3 */
82#define SUN4I_REG_BUF4_ADDR 0x0050 /* CAN Tx/Rx Buffer 4 */
83#define SUN4I_REG_BUF5_ADDR 0x0054 /* CAN Tx/Rx Buffer 5 */
84#define SUN4I_REG_BUF6_ADDR 0x0058 /* CAN Tx/Rx Buffer 6 */
85#define SUN4I_REG_BUF7_ADDR 0x005c /* CAN Tx/Rx Buffer 7 */
86#define SUN4I_REG_BUF8_ADDR 0x0060 /* CAN Tx/Rx Buffer 8 */
87#define SUN4I_REG_BUF9_ADDR 0x0064 /* CAN Tx/Rx Buffer 9 */
88#define SUN4I_REG_BUF10_ADDR 0x0068 /* CAN Tx/Rx Buffer 10 */
89#define SUN4I_REG_BUF11_ADDR 0x006c /* CAN Tx/Rx Buffer 11 */
90#define SUN4I_REG_BUF12_ADDR 0x0070 /* CAN Tx/Rx Buffer 12 */
91#define SUN4I_REG_ACPC_ADDR 0x0040 /* CAN Acceptance Code 0 */
92#define SUN4I_REG_ACPM_ADDR 0x0044 /* CAN Acceptance Mask 0 */
93#define SUN4I_REG_RBUF_RBACK_START_ADDR 0x0180 /* CAN transmit buffer start */
94#define SUN4I_REG_RBUF_RBACK_END_ADDR 0x01b0 /* CAN transmit buffer end */
95
96/* Controller Register Description */
97
98/* mode select register (r/w)
99 * offset:0x0000 default:0x0000_0001
100 */
101#define SUN4I_MSEL_SLEEP_MODE (0x01 << 4) /* write in reset mode */
102#define SUN4I_MSEL_WAKE_UP (0x00 << 4)
103#define SUN4I_MSEL_SINGLE_FILTER (0x01 << 3) /* write in reset mode */
104#define SUN4I_MSEL_DUAL_FILTERS (0x00 << 3)
105#define SUN4I_MSEL_LOOPBACK_MODE BIT(2)
106#define SUN4I_MSEL_LISTEN_ONLY_MODE BIT(1)
107#define SUN4I_MSEL_RESET_MODE BIT(0)
108
109/* command register (w)
110 * offset:0x0004 default:0x0000_0000
111 */
112#define SUN4I_CMD_BUS_OFF_REQ BIT(5)
113#define SUN4I_CMD_SELF_RCV_REQ BIT(4)
114#define SUN4I_CMD_CLEAR_OR_FLAG BIT(3)
115#define SUN4I_CMD_RELEASE_RBUF BIT(2)
116#define SUN4I_CMD_ABORT_REQ BIT(1)
117#define SUN4I_CMD_TRANS_REQ BIT(0)
118
119/* status register (r)
120 * offset:0x0008 default:0x0000_003c
121 */
122#define SUN4I_STA_BIT_ERR (0x00 << 22)
123#define SUN4I_STA_FORM_ERR (0x01 << 22)
124#define SUN4I_STA_STUFF_ERR (0x02 << 22)
125#define SUN4I_STA_OTHER_ERR (0x03 << 22)
126#define SUN4I_STA_MASK_ERR (0x03 << 22)
127#define SUN4I_STA_ERR_DIR BIT(21)
128#define SUN4I_STA_ERR_SEG_CODE (0x1f << 16)
129#define SUN4I_STA_START (0x03 << 16)
130#define SUN4I_STA_ID28_21 (0x02 << 16)
131#define SUN4I_STA_ID20_18 (0x06 << 16)
132#define SUN4I_STA_SRTR (0x04 << 16)
133#define SUN4I_STA_IDE (0x05 << 16)
134#define SUN4I_STA_ID17_13 (0x07 << 16)
135#define SUN4I_STA_ID12_5 (0x0f << 16)
136#define SUN4I_STA_ID4_0 (0x0e << 16)
137#define SUN4I_STA_RTR (0x0c << 16)
138#define SUN4I_STA_RB1 (0x0d << 16)
139#define SUN4I_STA_RB0 (0x09 << 16)
140#define SUN4I_STA_DLEN (0x0b << 16)
141#define SUN4I_STA_DATA_FIELD (0x0a << 16)
142#define SUN4I_STA_CRC_SEQUENCE (0x08 << 16)
143#define SUN4I_STA_CRC_DELIMITER (0x18 << 16)
144#define SUN4I_STA_ACK (0x19 << 16)
145#define SUN4I_STA_ACK_DELIMITER (0x1b << 16)
146#define SUN4I_STA_END (0x1a << 16)
147#define SUN4I_STA_INTERMISSION (0x12 << 16)
148#define SUN4I_STA_ACTIVE_ERROR (0x11 << 16)
149#define SUN4I_STA_PASSIVE_ERROR (0x16 << 16)
150#define SUN4I_STA_TOLERATE_DOMINANT_BITS (0x13 << 16)
151#define SUN4I_STA_ERROR_DELIMITER (0x17 << 16)
152#define SUN4I_STA_OVERLOAD (0x1c << 16)
153#define SUN4I_STA_BUS_OFF BIT(7)
154#define SUN4I_STA_ERR_STA BIT(6)
155#define SUN4I_STA_TRANS_BUSY BIT(5)
156#define SUN4I_STA_RCV_BUSY BIT(4)
157#define SUN4I_STA_TRANS_OVER BIT(3)
158#define SUN4I_STA_TBUF_RDY BIT(2)
159#define SUN4I_STA_DATA_ORUN BIT(1)
160#define SUN4I_STA_RBUF_RDY BIT(0)
161
162/* interrupt register (r)
163 * offset:0x000c default:0x0000_0000
164 */
165#define SUN4I_INT_BUS_ERR BIT(7)
166#define SUN4I_INT_ARB_LOST BIT(6)
167#define SUN4I_INT_ERR_PASSIVE BIT(5)
168#define SUN4I_INT_WAKEUP BIT(4)
169#define SUN4I_INT_DATA_OR BIT(3)
170#define SUN4I_INT_ERR_WRN BIT(2)
171#define SUN4I_INT_TBUF_VLD BIT(1)
172#define SUN4I_INT_RBUF_VLD BIT(0)
173
174/* interrupt enable register (r/w)
175 * offset:0x0010 default:0x0000_0000
176 */
177#define SUN4I_INTEN_BERR BIT(7)
178#define SUN4I_INTEN_ARB_LOST BIT(6)
179#define SUN4I_INTEN_ERR_PASSIVE BIT(5)
180#define SUN4I_INTEN_WAKEUP BIT(4)
181#define SUN4I_INTEN_OR BIT(3)
182#define SUN4I_INTEN_ERR_WRN BIT(2)
183#define SUN4I_INTEN_TX BIT(1)
184#define SUN4I_INTEN_RX BIT(0)
185
186/* error code */
187#define SUN4I_ERR_INRCV (0x1 << 5)
188#define SUN4I_ERR_INTRANS (0x0 << 5)
189
190/* filter mode */
191#define SUN4I_FILTER_CLOSE 0
192#define SUN4I_SINGLE_FLTER_MODE 1
193#define SUN4I_DUAL_FILTER_MODE 2
194
195/* message buffer flags */
196#define SUN4I_MSG_EFF_FLAG BIT(7)
197#define SUN4I_MSG_RTR_FLAG BIT(6)
198
199/* max. number of interrupts handled in ISR */
200#define SUN4I_CAN_MAX_IRQ 20
201#define SUN4I_MODE_MAX_RETRIES 100
202
203struct sun4ican_priv {
204 struct can_priv can;
205 void __iomem *base;
206 struct clk *clk;
207 spinlock_t cmdreg_lock; /* lock for concurrent cmd register writes */
208};
209
210static const struct can_bittiming_const sun4ican_bittiming_const = {
211 .name = DRV_NAME,
212 .tseg1_min = 1,
213 .tseg1_max = 16,
214 .tseg2_min = 1,
215 .tseg2_max = 8,
216 .sjw_max = 4,
217 .brp_min = 1,
218 .brp_max = 64,
219 .brp_inc = 1,
220};
221
222static void sun4i_can_write_cmdreg(struct sun4ican_priv *priv, u8 val)
223{
224 unsigned long flags;
225
226 spin_lock_irqsave(&priv->cmdreg_lock, flags);
227 writel(val, priv->base + SUN4I_REG_CMD_ADDR);
228 spin_unlock_irqrestore(&priv->cmdreg_lock, flags);
229}
230
231static int set_normal_mode(struct net_device *dev)
232{
233 struct sun4ican_priv *priv = netdev_priv(dev);
234 int retry = SUN4I_MODE_MAX_RETRIES;
235 u32 mod_reg_val = 0;
236
237 do {
238 mod_reg_val = readl(priv->base + SUN4I_REG_MSEL_ADDR);
239 mod_reg_val &= ~SUN4I_MSEL_RESET_MODE;
240 writel(mod_reg_val, priv->base + SUN4I_REG_MSEL_ADDR);
241 } while (retry-- && (mod_reg_val & SUN4I_MSEL_RESET_MODE));
242
243 if (readl(priv->base + SUN4I_REG_MSEL_ADDR) & SUN4I_MSEL_RESET_MODE) {
244 netdev_err(dev,
245 "setting controller into normal mode failed!\n");
246 return -ETIMEDOUT;
247 }
248
249 return 0;
250}
251
252static int set_reset_mode(struct net_device *dev)
253{
254 struct sun4ican_priv *priv = netdev_priv(dev);
255 int retry = SUN4I_MODE_MAX_RETRIES;
256 u32 mod_reg_val = 0;
257
258 do {
259 mod_reg_val = readl(priv->base + SUN4I_REG_MSEL_ADDR);
260 mod_reg_val |= SUN4I_MSEL_RESET_MODE;
261 writel(mod_reg_val, priv->base + SUN4I_REG_MSEL_ADDR);
262 } while (retry-- && !(mod_reg_val & SUN4I_MSEL_RESET_MODE));
263
264 if (!(readl(priv->base + SUN4I_REG_MSEL_ADDR) &
265 SUN4I_MSEL_RESET_MODE)) {
266 netdev_err(dev, "setting controller into reset mode failed!\n");
267 return -ETIMEDOUT;
268 }
269
270 return 0;
271}
272
273/* bittiming is called in reset_mode only */
274static int sun4ican_set_bittiming(struct net_device *dev)
275{
276 struct sun4ican_priv *priv = netdev_priv(dev);
277 struct can_bittiming *bt = &priv->can.bittiming;
278 u32 cfg;
279
280 cfg = ((bt->brp - 1) & 0x3FF) |
281 (((bt->sjw - 1) & 0x3) << 14) |
282 (((bt->prop_seg + bt->phase_seg1 - 1) & 0xf) << 16) |
283 (((bt->phase_seg2 - 1) & 0x7) << 20);
284 if (priv->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES)
285 cfg |= 0x800000;
286
287 netdev_dbg(dev, "setting BITTIMING=0x%08x\n", cfg);
288 writel(cfg, priv->base + SUN4I_REG_BTIME_ADDR);
289
290 return 0;
291}
292
293static int sun4ican_get_berr_counter(const struct net_device *dev,
294 struct can_berr_counter *bec)
295{
296 struct sun4ican_priv *priv = netdev_priv(dev);
297 u32 errors;
298 int err;
299
300 err = clk_prepare_enable(priv->clk);
301 if (err) {
302 netdev_err(dev, "could not enable clock\n");
303 return err;
304 }
305
306 errors = readl(priv->base + SUN4I_REG_ERRC_ADDR);
307
308 bec->txerr = errors & 0xFF;
309 bec->rxerr = (errors >> 16) & 0xFF;
310
311 clk_disable_unprepare(priv->clk);
312
313 return 0;
314}
315
316static int sun4i_can_start(struct net_device *dev)
317{
318 struct sun4ican_priv *priv = netdev_priv(dev);
319 int err;
320 u32 mod_reg_val;
321
322 /* we need to enter the reset mode */
323 err = set_reset_mode(dev);
324 if (err) {
325 netdev_err(dev, "could not enter reset mode\n");
326 return err;
327 }
328
329 /* set filters - we accept all */
330 writel(0x00000000, priv->base + SUN4I_REG_ACPC_ADDR);
331 writel(0xFFFFFFFF, priv->base + SUN4I_REG_ACPM_ADDR);
332
333 /* clear error counters and error code capture */
334 writel(0, priv->base + SUN4I_REG_ERRC_ADDR);
335
336 /* enable interrupts */
337 if (priv->can.ctrlmode & CAN_CTRLMODE_BERR_REPORTING)
338 writel(0xFF, priv->base + SUN4I_REG_INTEN_ADDR);
339 else
340 writel(0xFF & ~SUN4I_INTEN_BERR,
341 priv->base + SUN4I_REG_INTEN_ADDR);
342
343 /* enter the selected mode */
344 mod_reg_val = readl(priv->base + SUN4I_REG_MSEL_ADDR);
345 if (priv->can.ctrlmode & CAN_CTRLMODE_PRESUME_ACK)
346 mod_reg_val |= SUN4I_MSEL_LOOPBACK_MODE;
347 else if (priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY)
348 mod_reg_val |= SUN4I_MSEL_LISTEN_ONLY_MODE;
349 writel(mod_reg_val, priv->base + SUN4I_REG_MSEL_ADDR);
350
351 err = sun4ican_set_bittiming(dev);
352 if (err)
353 return err;
354
355 /* we are ready to enter the normal mode */
356 err = set_normal_mode(dev);
357 if (err) {
358 netdev_err(dev, "could not enter normal mode\n");
359 return err;
360 }
361
362 priv->can.state = CAN_STATE_ERROR_ACTIVE;
363
364 return 0;
365}
366
367static int sun4i_can_stop(struct net_device *dev)
368{
369 struct sun4ican_priv *priv = netdev_priv(dev);
370 int err;
371
372 priv->can.state = CAN_STATE_STOPPED;
373 /* we need to enter reset mode */
374 err = set_reset_mode(dev);
375 if (err) {
376 netdev_err(dev, "could not enter reset mode\n");
377 return err;
378 }
379
380 /* disable all interrupts */
381 writel(0, priv->base + SUN4I_REG_INTEN_ADDR);
382
383 return 0;
384}
385
386static int sun4ican_set_mode(struct net_device *dev, enum can_mode mode)
387{
388 int err;
389
390 switch (mode) {
391 case CAN_MODE_START:
392 err = sun4i_can_start(dev);
393 if (err) {
394 netdev_err(dev, "starting CAN controller failed!\n");
395 return err;
396 }
397 if (netif_queue_stopped(dev))
398 netif_wake_queue(dev);
399 break;
400
401 default:
402 return -EOPNOTSUPP;
403 }
404 return 0;
405}
406
407/* transmit a CAN message
408 * message layout in the sk_buff should be like this:
409 * xx xx xx xx ff ll 00 11 22 33 44 55 66 77
410 * [ can_id ] [flags] [len] [can data (up to 8 bytes]
411 */
412static int sun4ican_start_xmit(struct sk_buff *skb, struct net_device *dev)
413{
414 struct sun4ican_priv *priv = netdev_priv(dev);
415 struct can_frame *cf = (struct can_frame *)skb->data;
416 u8 dlc;
417 u32 dreg, msg_flag_n;
418 canid_t id;
419 int i;
420
421 if (can_dropped_invalid_skb(dev, skb))
422 return NETDEV_TX_OK;
423
424 netif_stop_queue(dev);
425
426 id = cf->can_id;
427 dlc = cf->can_dlc;
428 msg_flag_n = dlc;
429
430 if (id & CAN_RTR_FLAG)
431 msg_flag_n |= SUN4I_MSG_RTR_FLAG;
432
433 if (id & CAN_EFF_FLAG) {
434 msg_flag_n |= SUN4I_MSG_EFF_FLAG;
435 dreg = SUN4I_REG_BUF5_ADDR;
436 writel((id >> 21) & 0xFF, priv->base + SUN4I_REG_BUF1_ADDR);
437 writel((id >> 13) & 0xFF, priv->base + SUN4I_REG_BUF2_ADDR);
438 writel((id >> 5) & 0xFF, priv->base + SUN4I_REG_BUF3_ADDR);
439 writel((id << 3) & 0xF8, priv->base + SUN4I_REG_BUF4_ADDR);
440 } else {
441 dreg = SUN4I_REG_BUF3_ADDR;
442 writel((id >> 3) & 0xFF, priv->base + SUN4I_REG_BUF1_ADDR);
443 writel((id << 5) & 0xE0, priv->base + SUN4I_REG_BUF2_ADDR);
444 }
445
446 for (i = 0; i < dlc; i++)
447 writel(cf->data[i], priv->base + (dreg + i * 4));
448
449 writel(msg_flag_n, priv->base + SUN4I_REG_BUF0_ADDR);
450
451 can_put_echo_skb(skb, dev, 0);
452
453 if (priv->can.ctrlmode & CAN_CTRLMODE_LOOPBACK)
454 sun4i_can_write_cmdreg(priv, SUN4I_CMD_SELF_RCV_REQ);
455 else
456 sun4i_can_write_cmdreg(priv, SUN4I_CMD_TRANS_REQ);
457
458 return NETDEV_TX_OK;
459}
460
461static void sun4i_can_rx(struct net_device *dev)
462{
463 struct sun4ican_priv *priv = netdev_priv(dev);
464 struct net_device_stats *stats = &dev->stats;
465 struct can_frame *cf;
466 struct sk_buff *skb;
467 u8 fi;
468 u32 dreg;
469 canid_t id;
470 int i;
471
472 /* create zero'ed CAN frame buffer */
473 skb = alloc_can_skb(dev, &cf);
474 if (!skb)
475 return;
476
477 fi = readl(priv->base + SUN4I_REG_BUF0_ADDR);
478 cf->can_dlc = get_can_dlc(fi & 0x0F);
479 if (fi & SUN4I_MSG_EFF_FLAG) {
480 dreg = SUN4I_REG_BUF5_ADDR;
481 id = (readl(priv->base + SUN4I_REG_BUF1_ADDR) << 21) |
482 (readl(priv->base + SUN4I_REG_BUF2_ADDR) << 13) |
483 (readl(priv->base + SUN4I_REG_BUF3_ADDR) << 5) |
484 ((readl(priv->base + SUN4I_REG_BUF4_ADDR) >> 3) & 0x1f);
485 id |= CAN_EFF_FLAG;
486 } else {
487 dreg = SUN4I_REG_BUF3_ADDR;
488 id = (readl(priv->base + SUN4I_REG_BUF1_ADDR) << 3) |
489 ((readl(priv->base + SUN4I_REG_BUF2_ADDR) >> 5) & 0x7);
490 }
491
492 /* remote frame ? */
493 if (fi & SUN4I_MSG_RTR_FLAG)
494 id |= CAN_RTR_FLAG;
495 else
496 for (i = 0; i < cf->can_dlc; i++)
497 cf->data[i] = readl(priv->base + dreg + i * 4);
498
499 cf->can_id = id;
500
501 sun4i_can_write_cmdreg(priv, SUN4I_CMD_RELEASE_RBUF);
502
503 stats->rx_packets++;
504 stats->rx_bytes += cf->can_dlc;
505 netif_rx(skb);
506
507 can_led_event(dev, CAN_LED_EVENT_RX);
508}
509
510static int sun4i_can_err(struct net_device *dev, u8 isrc, u8 status)
511{
512 struct sun4ican_priv *priv = netdev_priv(dev);
513 struct net_device_stats *stats = &dev->stats;
514 struct can_frame *cf;
515 struct sk_buff *skb;
516 enum can_state state = priv->can.state;
517 enum can_state rx_state, tx_state;
518 unsigned int rxerr, txerr, errc;
519 u32 ecc, alc;
520
521 /* we don't skip if alloc fails because we want the stats anyhow */
522 skb = alloc_can_err_skb(dev, &cf);
523
524 errc = readl(priv->base + SUN4I_REG_ERRC_ADDR);
525 rxerr = (errc >> 16) & 0xFF;
526 txerr = errc & 0xFF;
527
528 if (skb) {
529 cf->data[6] = txerr;
530 cf->data[7] = rxerr;
531 }
532
533 if (isrc & SUN4I_INT_DATA_OR) {
534 /* data overrun interrupt */
535 netdev_dbg(dev, "data overrun interrupt\n");
536 if (likely(skb)) {
537 cf->can_id |= CAN_ERR_CRTL;
538 cf->data[1] = CAN_ERR_CRTL_RX_OVERFLOW;
539 }
540 stats->rx_over_errors++;
541 stats->rx_errors++;
542 /* clear bit */
543 sun4i_can_write_cmdreg(priv, SUN4I_CMD_CLEAR_OR_FLAG);
544 }
545 if (isrc & SUN4I_INT_ERR_WRN) {
546 /* error warning interrupt */
547 netdev_dbg(dev, "error warning interrupt\n");
548
549 if (status & SUN4I_STA_BUS_OFF)
550 state = CAN_STATE_BUS_OFF;
551 else if (status & SUN4I_STA_ERR_STA)
552 state = CAN_STATE_ERROR_WARNING;
553 else
554 state = CAN_STATE_ERROR_ACTIVE;
555 }
556 if (isrc & SUN4I_INT_BUS_ERR) {
557 /* bus error interrupt */
558 netdev_dbg(dev, "bus error interrupt\n");
559 priv->can.can_stats.bus_error++;
560 stats->rx_errors++;
561
562 if (likely(skb)) {
563 ecc = readl(priv->base + SUN4I_REG_STA_ADDR);
564
565 cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR;
566
567 switch (ecc & SUN4I_STA_MASK_ERR) {
568 case SUN4I_STA_BIT_ERR:
569 cf->data[2] |= CAN_ERR_PROT_BIT;
570 break;
571 case SUN4I_STA_FORM_ERR:
572 cf->data[2] |= CAN_ERR_PROT_FORM;
573 break;
574 case SUN4I_STA_STUFF_ERR:
575 cf->data[2] |= CAN_ERR_PROT_STUFF;
576 break;
577 default:
578 cf->data[3] = (ecc & SUN4I_STA_ERR_SEG_CODE)
579 >> 16;
580 break;
581 }
582 /* error occurred during transmission? */
583 if ((ecc & SUN4I_STA_ERR_DIR) == 0)
584 cf->data[2] |= CAN_ERR_PROT_TX;
585 }
586 }
587 if (isrc & SUN4I_INT_ERR_PASSIVE) {
588 /* error passive interrupt */
589 netdev_dbg(dev, "error passive interrupt\n");
590 if (state == CAN_STATE_ERROR_PASSIVE)
591 state = CAN_STATE_ERROR_WARNING;
592 else
593 state = CAN_STATE_ERROR_PASSIVE;
594 }
595 if (isrc & SUN4I_INT_ARB_LOST) {
596 /* arbitration lost interrupt */
597 netdev_dbg(dev, "arbitration lost interrupt\n");
598 alc = readl(priv->base + SUN4I_REG_STA_ADDR);
599 priv->can.can_stats.arbitration_lost++;
600 stats->tx_errors++;
601 if (likely(skb)) {
602 cf->can_id |= CAN_ERR_LOSTARB;
603 cf->data[0] = (alc >> 8) & 0x1f;
604 }
605 }
606
607 if (state != priv->can.state) {
608 tx_state = txerr >= rxerr ? state : 0;
609 rx_state = txerr <= rxerr ? state : 0;
610
611 if (likely(skb))
612 can_change_state(dev, cf, tx_state, rx_state);
613 else
614 priv->can.state = state;
615 if (state == CAN_STATE_BUS_OFF)
616 can_bus_off(dev);
617 }
618
619 if (likely(skb)) {
620 stats->rx_packets++;
621 stats->rx_bytes += cf->can_dlc;
622 netif_rx(skb);
623 } else {
624 return -ENOMEM;
625 }
626
627 return 0;
628}
629
630static irqreturn_t sun4i_can_interrupt(int irq, void *dev_id)
631{
632 struct net_device *dev = (struct net_device *)dev_id;
633 struct sun4ican_priv *priv = netdev_priv(dev);
634 struct net_device_stats *stats = &dev->stats;
635 u8 isrc, status;
636 int n = 0;
637
638 while ((isrc = readl(priv->base + SUN4I_REG_INT_ADDR)) &&
639 (n < SUN4I_CAN_MAX_IRQ)) {
640 n++;
641 status = readl(priv->base + SUN4I_REG_STA_ADDR);
642
643 if (isrc & SUN4I_INT_WAKEUP)
644 netdev_warn(dev, "wakeup interrupt\n");
645
646 if (isrc & SUN4I_INT_TBUF_VLD) {
647 /* transmission complete interrupt */
648 stats->tx_bytes +=
649 readl(priv->base +
650 SUN4I_REG_RBUF_RBACK_START_ADDR) & 0xf;
651 stats->tx_packets++;
652 can_get_echo_skb(dev, 0);
653 netif_wake_queue(dev);
654 can_led_event(dev, CAN_LED_EVENT_TX);
655 }
656 if (isrc & SUN4I_INT_RBUF_VLD) {
657 /* receive interrupt */
658 while (status & SUN4I_STA_RBUF_RDY) {
659 /* RX buffer is not empty */
660 sun4i_can_rx(dev);
661 status = readl(priv->base + SUN4I_REG_STA_ADDR);
662 }
663 }
664 if (isrc &
665 (SUN4I_INT_DATA_OR | SUN4I_INT_ERR_WRN | SUN4I_INT_BUS_ERR |
666 SUN4I_INT_ERR_PASSIVE | SUN4I_INT_ARB_LOST)) {
667 /* error interrupt */
668 if (sun4i_can_err(dev, isrc, status))
669 netdev_err(dev, "can't allocate buffer - clearing pending interrupts\n");
670 }
671 /* clear interrupts */
672 writel(isrc, priv->base + SUN4I_REG_INT_ADDR);
673 readl(priv->base + SUN4I_REG_INT_ADDR);
674 }
675 if (n >= SUN4I_CAN_MAX_IRQ)
676 netdev_dbg(dev, "%d messages handled in ISR", n);
677
678 return (n) ? IRQ_HANDLED : IRQ_NONE;
679}
680
681static int sun4ican_open(struct net_device *dev)
682{
683 struct sun4ican_priv *priv = netdev_priv(dev);
684 int err;
685
686 /* common open */
687 err = open_candev(dev);
688 if (err)
689 return err;
690
691 /* register interrupt handler */
692 err = request_irq(dev->irq, sun4i_can_interrupt, 0, dev->name, dev);
693 if (err) {
694 netdev_err(dev, "request_irq err: %d\n", err);
695 goto exit_irq;
696 }
697
698 /* turn on clocking for CAN peripheral block */
699 err = clk_prepare_enable(priv->clk);
700 if (err) {
701 netdev_err(dev, "could not enable CAN peripheral clock\n");
702 goto exit_clock;
703 }
704
705 err = sun4i_can_start(dev);
706 if (err) {
707 netdev_err(dev, "could not start CAN peripheral\n");
708 goto exit_can_start;
709 }
710
711 can_led_event(dev, CAN_LED_EVENT_OPEN);
712 netif_start_queue(dev);
713
714 return 0;
715
716exit_can_start:
717 clk_disable_unprepare(priv->clk);
718exit_clock:
719 free_irq(dev->irq, dev);
720exit_irq:
721 close_candev(dev);
722 return err;
723}
724
725static int sun4ican_close(struct net_device *dev)
726{
727 struct sun4ican_priv *priv = netdev_priv(dev);
728
729 netif_stop_queue(dev);
730 sun4i_can_stop(dev);
731 clk_disable_unprepare(priv->clk);
732
733 free_irq(dev->irq, dev);
734 close_candev(dev);
735 can_led_event(dev, CAN_LED_EVENT_STOP);
736
737 return 0;
738}
739
740static const struct net_device_ops sun4ican_netdev_ops = {
741 .ndo_open = sun4ican_open,
742 .ndo_stop = sun4ican_close,
743 .ndo_start_xmit = sun4ican_start_xmit,
744};
745
746static const struct of_device_id sun4ican_of_match[] = {
747 {.compatible = "allwinner,sun4i-a10-can"},
748 {},
749};
750
751MODULE_DEVICE_TABLE(of, sun4ican_of_match);
752
753static int sun4ican_remove(struct platform_device *pdev)
754{
755 struct net_device *dev = platform_get_drvdata(pdev);
756
757 unregister_netdev(dev);
758 free_candev(dev);
759
760 return 0;
761}
762
763static int sun4ican_probe(struct platform_device *pdev)
764{
765 struct device_node *np = pdev->dev.of_node;
766 struct resource *mem;
767 struct clk *clk;
768 void __iomem *addr;
769 int err, irq;
770 struct net_device *dev;
771 struct sun4ican_priv *priv;
772
773 clk = of_clk_get(np, 0);
774 if (IS_ERR(clk)) {
775 dev_err(&pdev->dev, "unable to request clock\n");
776 err = -ENODEV;
777 goto exit;
778 }
779
780 irq = platform_get_irq(pdev, 0);
781 if (irq < 0) {
782 dev_err(&pdev->dev, "could not get a valid irq\n");
783 err = -ENODEV;
784 goto exit;
785 }
786
787 mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
788 addr = devm_ioremap_resource(&pdev->dev, mem);
789 if (IS_ERR(addr)) {
790 err = -EBUSY;
791 goto exit;
792 }
793
794 dev = alloc_candev(sizeof(struct sun4ican_priv), 1);
795 if (!dev) {
796 dev_err(&pdev->dev,
797 "could not allocate memory for CAN device\n");
798 err = -ENOMEM;
799 goto exit;
800 }
801
802 dev->netdev_ops = &sun4ican_netdev_ops;
803 dev->irq = irq;
804 dev->flags |= IFF_ECHO;
805
806 priv = netdev_priv(dev);
807 priv->can.clock.freq = clk_get_rate(clk);
808 priv->can.bittiming_const = &sun4ican_bittiming_const;
809 priv->can.do_set_mode = sun4ican_set_mode;
810 priv->can.do_get_berr_counter = sun4ican_get_berr_counter;
811 priv->can.ctrlmode_supported = CAN_CTRLMODE_BERR_REPORTING |
812 CAN_CTRLMODE_LISTENONLY |
813 CAN_CTRLMODE_LOOPBACK |
814 CAN_CTRLMODE_PRESUME_ACK |
815 CAN_CTRLMODE_3_SAMPLES;
816 priv->base = addr;
817 priv->clk = clk;
818 spin_lock_init(&priv->cmdreg_lock);
819
820 platform_set_drvdata(pdev, dev);
821 SET_NETDEV_DEV(dev, &pdev->dev);
822
823 err = register_candev(dev);
824 if (err) {
825 dev_err(&pdev->dev, "registering %s failed (err=%d)\n",
826 DRV_NAME, err);
827 goto exit_free;
828 }
829 devm_can_led_init(dev);
830
831 dev_info(&pdev->dev, "device registered (base=%p, irq=%d)\n",
832 priv->base, dev->irq);
833
834 return 0;
835
836exit_free:
837 free_candev(dev);
838exit:
839 return err;
840}
841
842static struct platform_driver sun4i_can_driver = {
843 .driver = {
844 .name = DRV_NAME,
845 .of_match_table = sun4ican_of_match,
846 },
847 .probe = sun4ican_probe,
848 .remove = sun4ican_remove,
849};
850
851module_platform_driver(sun4i_can_driver);
852
853MODULE_AUTHOR("Peter Chen <xingkongcp@gmail.com>");
854MODULE_AUTHOR("Gerhard Bertelsmann <info@gerhard-bertelsmann.de>");
855MODULE_LICENSE("Dual BSD/GPL");
856MODULE_DESCRIPTION("CAN driver for Allwinner SoCs (A10/A20)");