1// SPDX-License-Identifier: GPL-2.0-only
   2/* linux/drivers/mfd/sm501.c
   3 *
   4 * Copyright (C) 2006 Simtec Electronics
   5 *	Ben Dooks <ben@simtec.co.uk>
   6 *	Vincent Sanders <vince@simtec.co.uk>
   7 *
 
 
 
 
   8 * SM501 MFD driver
   9*/
  10
  11#include <linux/kernel.h>
  12#include <linux/module.h>
  13#include <linux/delay.h>
  14#include <linux/init.h>
  15#include <linux/list.h>
  16#include <linux/device.h>
  17#include <linux/platform_device.h>
  18#include <linux/pci.h>
  19#include <linux/platform_data/i2c-gpio.h>
  20#include <linux/gpio/driver.h>
  21#include <linux/gpio/machine.h>
  22#include <linux/slab.h>
  23
  24#include <linux/sm501.h>
  25#include <linux/sm501-regs.h>
  26#include <linux/serial_8250.h>
  27
  28#include <linux/io.h>
  29
  30struct sm501_device {
  31	struct list_head		list;
  32	struct platform_device		pdev;
  33};
  34
  35struct sm501_gpio;
  36
  37#ifdef CONFIG_MFD_SM501_GPIO
  38#include <linux/gpio.h>
  39
  40struct sm501_gpio_chip {
  41	struct gpio_chip	gpio;
  42	struct sm501_gpio	*ourgpio;	/* to get back to parent. */
  43	void __iomem		*regbase;
  44	void __iomem		*control;	/* address of control reg. */
  45};
  46
  47struct sm501_gpio {
  48	struct sm501_gpio_chip	low;
  49	struct sm501_gpio_chip	high;
  50	spinlock_t		lock;
  51
  52	unsigned int		 registered : 1;
  53	void __iomem		*regs;
  54	struct resource		*regs_res;
  55};
  56#else
  57struct sm501_gpio {
  58	/* no gpio support, empty definition for sm501_devdata. */
  59};
  60#endif
  61
  62struct sm501_devdata {
  63	spinlock_t			 reg_lock;
  64	struct mutex			 clock_lock;
  65	struct list_head		 devices;
  66	struct sm501_gpio		 gpio;
  67
  68	struct device			*dev;
  69	struct resource			*io_res;
  70	struct resource			*mem_res;
  71	struct resource			*regs_claim;
  72	struct sm501_platdata		*platdata;
  73
  74
  75	unsigned int			 in_suspend;
  76	unsigned long			 pm_misc;
  77
  78	int				 unit_power[20];
  79	unsigned int			 pdev_id;
  80	unsigned int			 irq;
  81	void __iomem			*regs;
  82	unsigned int			 rev;
  83};
  84
  85
  86#define MHZ (1000 * 1000)
  87
  88#ifdef DEBUG
  89static const unsigned int div_tab[] = {
  90	[0]		= 1,
  91	[1]		= 2,
  92	[2]		= 4,
  93	[3]		= 8,
  94	[4]		= 16,
  95	[5]		= 32,
  96	[6]		= 64,
  97	[7]		= 128,
  98	[8]		= 3,
  99	[9]		= 6,
 100	[10]	        = 12,
 101	[11]		= 24,
 102	[12]		= 48,
 103	[13]		= 96,
 104	[14]		= 192,
 105	[15]		= 384,
 106	[16]		= 5,
 107	[17]		= 10,
 108	[18]		= 20,
 109	[19]		= 40,
 110	[20]		= 80,
 111	[21]		= 160,
 112	[22]		= 320,
 113	[23]		= 604,
 114};
 115
 116static unsigned long decode_div(unsigned long pll2, unsigned long val,
 117				unsigned int lshft, unsigned int selbit,
 118				unsigned long mask)
 119{
 120	if (val & selbit)
 121		pll2 = 288 * MHZ;
 122
 123	return pll2 / div_tab[(val >> lshft) & mask];
 124}
 125
 126#define fmt_freq(x) ((x) / MHZ), ((x) % MHZ), (x)
 127
 128/* sm501_dump_clk
 129 *
 130 * Print out the current clock configuration for the device
 131*/
 132
 133static void sm501_dump_clk(struct sm501_devdata *sm)
 134{
 135	unsigned long misct = smc501_readl(sm->regs + SM501_MISC_TIMING);
 136	unsigned long pm0 = smc501_readl(sm->regs + SM501_POWER_MODE_0_CLOCK);
 137	unsigned long pm1 = smc501_readl(sm->regs + SM501_POWER_MODE_1_CLOCK);
 138	unsigned long pmc = smc501_readl(sm->regs + SM501_POWER_MODE_CONTROL);
 139	unsigned long sdclk0, sdclk1;
 140	unsigned long pll2 = 0;
 141
 142	switch (misct & 0x30) {
 143	case 0x00:
 144		pll2 = 336 * MHZ;
 145		break;
 146	case 0x10:
 147		pll2 = 288 * MHZ;
 148		break;
 149	case 0x20:
 150		pll2 = 240 * MHZ;
 151		break;
 152	case 0x30:
 153		pll2 = 192 * MHZ;
 154		break;
 155	}
 156
 157	sdclk0 = (misct & (1<<12)) ? pll2 : 288 * MHZ;
 158	sdclk0 /= div_tab[((misct >> 8) & 0xf)];
 159
 160	sdclk1 = (misct & (1<<20)) ? pll2 : 288 * MHZ;
 161	sdclk1 /= div_tab[((misct >> 16) & 0xf)];
 162
 163	dev_dbg(sm->dev, "MISCT=%08lx, PM0=%08lx, PM1=%08lx\n",
 164		misct, pm0, pm1);
 165
 166	dev_dbg(sm->dev, "PLL2 = %ld.%ld MHz (%ld), SDCLK0=%08lx, SDCLK1=%08lx\n",
 167		fmt_freq(pll2), sdclk0, sdclk1);
 168
 169	dev_dbg(sm->dev, "SDRAM: PM0=%ld, PM1=%ld\n", sdclk0, sdclk1);
 170
 171	dev_dbg(sm->dev, "PM0[%c]: "
 172		 "P2 %ld.%ld MHz (%ld), V2 %ld.%ld (%ld), "
 173		 "M %ld.%ld (%ld), MX1 %ld.%ld (%ld)\n",
 174		 (pmc & 3 ) == 0 ? '*' : '-',
 175		 fmt_freq(decode_div(pll2, pm0, 24, 1<<29, 31)),
 176		 fmt_freq(decode_div(pll2, pm0, 16, 1<<20, 15)),
 177		 fmt_freq(decode_div(pll2, pm0, 8,  1<<12, 15)),
 178		 fmt_freq(decode_div(pll2, pm0, 0,  1<<4,  15)));
 179
 180	dev_dbg(sm->dev, "PM1[%c]: "
 181		"P2 %ld.%ld MHz (%ld), V2 %ld.%ld (%ld), "
 182		"M %ld.%ld (%ld), MX1 %ld.%ld (%ld)\n",
 183		(pmc & 3 ) == 1 ? '*' : '-',
 184		fmt_freq(decode_div(pll2, pm1, 24, 1<<29, 31)),
 185		fmt_freq(decode_div(pll2, pm1, 16, 1<<20, 15)),
 186		fmt_freq(decode_div(pll2, pm1, 8,  1<<12, 15)),
 187		fmt_freq(decode_div(pll2, pm1, 0,  1<<4,  15)));
 188}
 189
 190static void sm501_dump_regs(struct sm501_devdata *sm)
 191{
 192	void __iomem *regs = sm->regs;
 193
 194	dev_info(sm->dev, "System Control   %08x\n",
 195			smc501_readl(regs + SM501_SYSTEM_CONTROL));
 196	dev_info(sm->dev, "Misc Control     %08x\n",
 197			smc501_readl(regs + SM501_MISC_CONTROL));
 198	dev_info(sm->dev, "GPIO Control Low %08x\n",
 199			smc501_readl(regs + SM501_GPIO31_0_CONTROL));
 200	dev_info(sm->dev, "GPIO Control Hi  %08x\n",
 201			smc501_readl(regs + SM501_GPIO63_32_CONTROL));
 202	dev_info(sm->dev, "DRAM Control     %08x\n",
 203			smc501_readl(regs + SM501_DRAM_CONTROL));
 204	dev_info(sm->dev, "Arbitration Ctrl %08x\n",
 205			smc501_readl(regs + SM501_ARBTRTN_CONTROL));
 206	dev_info(sm->dev, "Misc Timing      %08x\n",
 207			smc501_readl(regs + SM501_MISC_TIMING));
 208}
 209
 210static void sm501_dump_gate(struct sm501_devdata *sm)
 211{
 212	dev_info(sm->dev, "CurrentGate      %08x\n",
 213			smc501_readl(sm->regs + SM501_CURRENT_GATE));
 214	dev_info(sm->dev, "CurrentClock     %08x\n",
 215			smc501_readl(sm->regs + SM501_CURRENT_CLOCK));
 216	dev_info(sm->dev, "PowerModeControl %08x\n",
 217			smc501_readl(sm->regs + SM501_POWER_MODE_CONTROL));
 218}
 219
 220#else
 221static inline void sm501_dump_gate(struct sm501_devdata *sm) { }
 222static inline void sm501_dump_regs(struct sm501_devdata *sm) { }
 223static inline void sm501_dump_clk(struct sm501_devdata *sm) { }
 224#endif
 225
 226/* sm501_sync_regs
 227 *
 228 * ensure the
 229*/
 230
 231static void sm501_sync_regs(struct sm501_devdata *sm)
 232{
 233	smc501_readl(sm->regs);
 234}
 235
 236static inline void sm501_mdelay(struct sm501_devdata *sm, unsigned int delay)
 237{
 238	/* during suspend/resume, we are currently not allowed to sleep,
 239	 * so change to using mdelay() instead of msleep() if we
 240	 * are in one of these paths */
 241
 242	if (sm->in_suspend)
 243		mdelay(delay);
 244	else
 245		msleep(delay);
 246}
 247
 248/* sm501_misc_control
 249 *
 250 * alters the miscellaneous control parameters
 251*/
 252
 253int sm501_misc_control(struct device *dev,
 254		       unsigned long set, unsigned long clear)
 255{
 256	struct sm501_devdata *sm = dev_get_drvdata(dev);
 257	unsigned long misc;
 258	unsigned long save;
 259	unsigned long to;
 260
 261	spin_lock_irqsave(&sm->reg_lock, save);
 262
 263	misc = smc501_readl(sm->regs + SM501_MISC_CONTROL);
 264	to = (misc & ~clear) | set;
 265
 266	if (to != misc) {
 267		smc501_writel(to, sm->regs + SM501_MISC_CONTROL);
 268		sm501_sync_regs(sm);
 269
 270		dev_dbg(sm->dev, "MISC_CONTROL %08lx\n", misc);
 271	}
 272
 273	spin_unlock_irqrestore(&sm->reg_lock, save);
 274	return to;
 275}
 276
 277EXPORT_SYMBOL_GPL(sm501_misc_control);
 278
 279/* sm501_modify_reg
 280 *
 281 * Modify a register in the SM501 which may be shared with other
 282 * drivers.
 283*/
 284
 285unsigned long sm501_modify_reg(struct device *dev,
 286			       unsigned long reg,
 287			       unsigned long set,
 288			       unsigned long clear)
 289{
 290	struct sm501_devdata *sm = dev_get_drvdata(dev);
 291	unsigned long data;
 292	unsigned long save;
 293
 294	spin_lock_irqsave(&sm->reg_lock, save);
 295
 296	data = smc501_readl(sm->regs + reg);
 297	data |= set;
 298	data &= ~clear;
 299
 300	smc501_writel(data, sm->regs + reg);
 301	sm501_sync_regs(sm);
 302
 303	spin_unlock_irqrestore(&sm->reg_lock, save);
 304
 305	return data;
 306}
 307
 308EXPORT_SYMBOL_GPL(sm501_modify_reg);
 309
 310/* sm501_unit_power
 311 *
 312 * alters the power active gate to set specific units on or off
 313 */
 314
 315int sm501_unit_power(struct device *dev, unsigned int unit, unsigned int to)
 316{
 317	struct sm501_devdata *sm = dev_get_drvdata(dev);
 318	unsigned long mode;
 319	unsigned long gate;
 320	unsigned long clock;
 321
 322	mutex_lock(&sm->clock_lock);
 323
 324	mode = smc501_readl(sm->regs + SM501_POWER_MODE_CONTROL);
 325	gate = smc501_readl(sm->regs + SM501_CURRENT_GATE);
 326	clock = smc501_readl(sm->regs + SM501_CURRENT_CLOCK);
 327
 328	mode &= 3;		/* get current power mode */
 329
 330	if (unit >= ARRAY_SIZE(sm->unit_power)) {
 331		dev_err(dev, "%s: bad unit %d\n", __func__, unit);
 332		goto already;
 333	}
 334
 335	dev_dbg(sm->dev, "%s: unit %d, cur %d, to %d\n", __func__, unit,
 336		sm->unit_power[unit], to);
 337
 338	if (to == 0 && sm->unit_power[unit] == 0) {
 339		dev_err(sm->dev, "unit %d is already shutdown\n", unit);
 340		goto already;
 341	}
 342
 343	sm->unit_power[unit] += to ? 1 : -1;
 344	to = sm->unit_power[unit] ? 1 : 0;
 345
 346	if (to) {
 347		if (gate & (1 << unit))
 348			goto already;
 349		gate |= (1 << unit);
 350	} else {
 351		if (!(gate & (1 << unit)))
 352			goto already;
 353		gate &= ~(1 << unit);
 354	}
 355
 356	switch (mode) {
 357	case 1:
 358		smc501_writel(gate, sm->regs + SM501_POWER_MODE_0_GATE);
 359		smc501_writel(clock, sm->regs + SM501_POWER_MODE_0_CLOCK);
 360		mode = 0;
 361		break;
 362	case 2:
 363	case 0:
 364		smc501_writel(gate, sm->regs + SM501_POWER_MODE_1_GATE);
 365		smc501_writel(clock, sm->regs + SM501_POWER_MODE_1_CLOCK);
 366		mode = 1;
 367		break;
 368
 369	default:
 370		gate = -1;
 371		goto already;
 372	}
 373
 374	smc501_writel(mode, sm->regs + SM501_POWER_MODE_CONTROL);
 375	sm501_sync_regs(sm);
 376
 377	dev_dbg(sm->dev, "gate %08lx, clock %08lx, mode %08lx\n",
 378		gate, clock, mode);
 379
 380	sm501_mdelay(sm, 16);
 381
 382 already:
 383	mutex_unlock(&sm->clock_lock);
 384	return gate;
 385}
 386
 387EXPORT_SYMBOL_GPL(sm501_unit_power);
 388
 389/* clock value structure. */
 390struct sm501_clock {
 391	unsigned long mclk;
 392	int divider;
 393	int shift;
 394	unsigned int m, n, k;
 395};
 396
 397/* sm501_calc_clock
 398 *
 399 * Calculates the nearest discrete clock frequency that
 400 * can be achieved with the specified input clock.
 401 *   the maximum divisor is 3 or 5
 402 */
 403
 404static int sm501_calc_clock(unsigned long freq,
 405			    struct sm501_clock *clock,
 406			    int max_div,
 407			    unsigned long mclk,
 408			    long *best_diff)
 409{
 410	int ret = 0;
 411	int divider;
 412	int shift;
 413	long diff;
 414
 415	/* try dividers 1 and 3 for CRT and for panel,
 416	   try divider 5 for panel only.*/
 417
 418	for (divider = 1; divider <= max_div; divider += 2) {
 419		/* try all 8 shift values.*/
 420		for (shift = 0; shift < 8; shift++) {
 421			/* Calculate difference to requested clock */
 422			diff = DIV_ROUND_CLOSEST(mclk, divider << shift) - freq;
 423			if (diff < 0)
 424				diff = -diff;
 425
 426			/* If it is less than the current, use it */
 427			if (diff < *best_diff) {
 428				*best_diff = diff;
 429
 430				clock->mclk = mclk;
 431				clock->divider = divider;
 432				clock->shift = shift;
 433				ret = 1;
 434			}
 435		}
 436	}
 437
 438	return ret;
 439}
 440
 441/* sm501_calc_pll
 442 *
 443 * Calculates the nearest discrete clock frequency that can be
 444 * achieved using the programmable PLL.
 445 *   the maximum divisor is 3 or 5
 446 */
 447
 448static unsigned long sm501_calc_pll(unsigned long freq,
 449					struct sm501_clock *clock,
 450					int max_div)
 451{
 452	unsigned long mclk;
 453	unsigned int m, n, k;
 454	long best_diff = 999999999;
 455
 456	/*
 457	 * The SM502 datasheet doesn't specify the min/max values for M and N.
 458	 * N = 1 at least doesn't work in practice.
 459	 */
 460	for (m = 2; m <= 255; m++) {
 461		for (n = 2; n <= 127; n++) {
 462			for (k = 0; k <= 1; k++) {
 463				mclk = (24000000UL * m / n) >> k;
 464
 465				if (sm501_calc_clock(freq, clock, max_div,
 466						     mclk, &best_diff)) {
 467					clock->m = m;
 468					clock->n = n;
 469					clock->k = k;
 470				}
 471			}
 472		}
 473	}
 474
 475	/* Return best clock. */
 476	return clock->mclk / (clock->divider << clock->shift);
 477}
 478
 479/* sm501_select_clock
 480 *
 481 * Calculates the nearest discrete clock frequency that can be
 482 * achieved using the 288MHz and 336MHz PLLs.
 483 *   the maximum divisor is 3 or 5
 484 */
 485
 486static unsigned long sm501_select_clock(unsigned long freq,
 487					struct sm501_clock *clock,
 488					int max_div)
 489{
 490	unsigned long mclk;
 491	long best_diff = 999999999;
 492
 493	/* Try 288MHz and 336MHz clocks. */
 494	for (mclk = 288000000; mclk <= 336000000; mclk += 48000000) {
 495		sm501_calc_clock(freq, clock, max_div, mclk, &best_diff);
 496	}
 497
 498	/* Return best clock. */
 499	return clock->mclk / (clock->divider << clock->shift);
 500}
 501
 502/* sm501_set_clock
 503 *
 504 * set one of the four clock sources to the closest available frequency to
 505 *  the one specified
 506*/
 507
 508unsigned long sm501_set_clock(struct device *dev,
 509			      int clksrc,
 510			      unsigned long req_freq)
 511{
 512	struct sm501_devdata *sm = dev_get_drvdata(dev);
 513	unsigned long mode = smc501_readl(sm->regs + SM501_POWER_MODE_CONTROL);
 514	unsigned long gate = smc501_readl(sm->regs + SM501_CURRENT_GATE);
 515	unsigned long clock = smc501_readl(sm->regs + SM501_CURRENT_CLOCK);
 516	unsigned int pll_reg = 0;
 517	unsigned long sm501_freq; /* the actual frequency achieved */
 518	u64 reg;
 519
 520	struct sm501_clock to;
 521
 522	/* find achivable discrete frequency and setup register value
 523	 * accordingly, V2XCLK, MCLK and M1XCLK are the same P2XCLK
 524	 * has an extra bit for the divider */
 525
 526	switch (clksrc) {
 527	case SM501_CLOCK_P2XCLK:
 528		/* This clock is divided in half so to achieve the
 529		 * requested frequency the value must be multiplied by
 530		 * 2. This clock also has an additional pre divisor */
 531
 532		if (sm->rev >= 0xC0) {
 533			/* SM502 -> use the programmable PLL */
 534			sm501_freq = (sm501_calc_pll(2 * req_freq,
 535						     &to, 5) / 2);
 536			reg = to.shift & 0x07;/* bottom 3 bits are shift */
 537			if (to.divider == 3)
 538				reg |= 0x08; /* /3 divider required */
 539			else if (to.divider == 5)
 540				reg |= 0x10; /* /5 divider required */
 541			reg |= 0x40; /* select the programmable PLL */
 542			pll_reg = 0x20000 | (to.k << 15) | (to.n << 8) | to.m;
 543		} else {
 544			sm501_freq = (sm501_select_clock(2 * req_freq,
 545							 &to, 5) / 2);
 546			reg = to.shift & 0x07;/* bottom 3 bits are shift */
 547			if (to.divider == 3)
 548				reg |= 0x08; /* /3 divider required */
 549			else if (to.divider == 5)
 550				reg |= 0x10; /* /5 divider required */
 551			if (to.mclk != 288000000)
 552				reg |= 0x20; /* which mclk pll is source */
 553		}
 554		break;
 555
 556	case SM501_CLOCK_V2XCLK:
 557		/* This clock is divided in half so to achieve the
 558		 * requested frequency the value must be multiplied by 2. */
 559
 560		sm501_freq = (sm501_select_clock(2 * req_freq, &to, 3) / 2);
 561		reg=to.shift & 0x07;	/* bottom 3 bits are shift */
 562		if (to.divider == 3)
 563			reg |= 0x08;	/* /3 divider required */
 564		if (to.mclk != 288000000)
 565			reg |= 0x10;	/* which mclk pll is source */
 566		break;
 567
 568	case SM501_CLOCK_MCLK:
 569	case SM501_CLOCK_M1XCLK:
 570		/* These clocks are the same and not further divided */
 571
 572		sm501_freq = sm501_select_clock( req_freq, &to, 3);
 573		reg=to.shift & 0x07;	/* bottom 3 bits are shift */
 574		if (to.divider == 3)
 575			reg |= 0x08;	/* /3 divider required */
 576		if (to.mclk != 288000000)
 577			reg |= 0x10;	/* which mclk pll is source */
 578		break;
 579
 580	default:
 581		return 0; /* this is bad */
 582	}
 583
 584	mutex_lock(&sm->clock_lock);
 585
 586	mode = smc501_readl(sm->regs + SM501_POWER_MODE_CONTROL);
 587	gate = smc501_readl(sm->regs + SM501_CURRENT_GATE);
 588	clock = smc501_readl(sm->regs + SM501_CURRENT_CLOCK);
 589
 590	clock = clock & ~(0xFF << clksrc);
 591	clock |= reg<<clksrc;
 592
 593	mode &= 3;	/* find current mode */
 594
 595	switch (mode) {
 596	case 1:
 597		smc501_writel(gate, sm->regs + SM501_POWER_MODE_0_GATE);
 598		smc501_writel(clock, sm->regs + SM501_POWER_MODE_0_CLOCK);
 599		mode = 0;
 600		break;
 601	case 2:
 602	case 0:
 603		smc501_writel(gate, sm->regs + SM501_POWER_MODE_1_GATE);
 604		smc501_writel(clock, sm->regs + SM501_POWER_MODE_1_CLOCK);
 605		mode = 1;
 606		break;
 607
 608	default:
 609		mutex_unlock(&sm->clock_lock);
 610		return -1;
 611	}
 612
 613	smc501_writel(mode, sm->regs + SM501_POWER_MODE_CONTROL);
 614
 615	if (pll_reg)
 616		smc501_writel(pll_reg,
 617				sm->regs + SM501_PROGRAMMABLE_PLL_CONTROL);
 618
 619	sm501_sync_regs(sm);
 620
 621	dev_dbg(sm->dev, "gate %08lx, clock %08lx, mode %08lx\n",
 622		gate, clock, mode);
 623
 624	sm501_mdelay(sm, 16);
 625	mutex_unlock(&sm->clock_lock);
 626
 627	sm501_dump_clk(sm);
 628
 629	return sm501_freq;
 630}
 631
 632EXPORT_SYMBOL_GPL(sm501_set_clock);
 633
 634/* sm501_find_clock
 635 *
 636 * finds the closest available frequency for a given clock
 637*/
 638
 639unsigned long sm501_find_clock(struct device *dev,
 640			       int clksrc,
 641			       unsigned long req_freq)
 642{
 643	struct sm501_devdata *sm = dev_get_drvdata(dev);
 644	unsigned long sm501_freq; /* the frequency achieveable by the 501 */
 645	struct sm501_clock to;
 646
 647	switch (clksrc) {
 648	case SM501_CLOCK_P2XCLK:
 649		if (sm->rev >= 0xC0) {
 650			/* SM502 -> use the programmable PLL */
 651			sm501_freq = (sm501_calc_pll(2 * req_freq,
 652						     &to, 5) / 2);
 653		} else {
 654			sm501_freq = (sm501_select_clock(2 * req_freq,
 655							 &to, 5) / 2);
 656		}
 657		break;
 658
 659	case SM501_CLOCK_V2XCLK:
 660		sm501_freq = (sm501_select_clock(2 * req_freq, &to, 3) / 2);
 661		break;
 662
 663	case SM501_CLOCK_MCLK:
 664	case SM501_CLOCK_M1XCLK:
 665		sm501_freq = sm501_select_clock(req_freq, &to, 3);
 666		break;
 667
 668	default:
 669		sm501_freq = 0;		/* error */
 670	}
 671
 672	return sm501_freq;
 673}
 674
 675EXPORT_SYMBOL_GPL(sm501_find_clock);
 676
 677static struct sm501_device *to_sm_device(struct platform_device *pdev)
 678{
 679	return container_of(pdev, struct sm501_device, pdev);
 680}
 681
 682/* sm501_device_release
 683 *
 684 * A release function for the platform devices we create to allow us to
 685 * free any items we allocated
 686*/
 687
 688static void sm501_device_release(struct device *dev)
 689{
 690	kfree(to_sm_device(to_platform_device(dev)));
 691}
 692
 693/* sm501_create_subdev
 694 *
 695 * Create a skeleton platform device with resources for passing to a
 696 * sub-driver
 697*/
 698
 699static struct platform_device *
 700sm501_create_subdev(struct sm501_devdata *sm, char *name,
 701		    unsigned int res_count, unsigned int platform_data_size)
 702{
 703	struct sm501_device *smdev;
 704
 705	smdev = kzalloc(sizeof(struct sm501_device) +
 706			(sizeof(struct resource) * res_count) +
 707			platform_data_size, GFP_KERNEL);
 708	if (!smdev)
 709		return NULL;
 710
 711	smdev->pdev.dev.release = sm501_device_release;
 712
 713	smdev->pdev.name = name;
 714	smdev->pdev.id = sm->pdev_id;
 715	smdev->pdev.dev.parent = sm->dev;
 716	smdev->pdev.dev.coherent_dma_mask = 0xffffffff;
 717
 718	if (res_count) {
 719		smdev->pdev.resource = (struct resource *)(smdev+1);
 720		smdev->pdev.num_resources = res_count;
 721	}
 722	if (platform_data_size)
 723		smdev->pdev.dev.platform_data = (void *)(smdev+1);
 724
 725	return &smdev->pdev;
 726}
 727
 728/* sm501_register_device
 729 *
 730 * Register a platform device created with sm501_create_subdev()
 731*/
 732
 733static int sm501_register_device(struct sm501_devdata *sm,
 734				 struct platform_device *pdev)
 735{
 736	struct sm501_device *smdev = to_sm_device(pdev);
 737	int ptr;
 738	int ret;
 739
 740	for (ptr = 0; ptr < pdev->num_resources; ptr++) {
 741		printk(KERN_DEBUG "%s[%d] %pR\n",
 742		       pdev->name, ptr, &pdev->resource[ptr]);
 743	}
 744
 745	ret = platform_device_register(pdev);
 746
 747	if (ret >= 0) {
 748		dev_dbg(sm->dev, "registered %s\n", pdev->name);
 749		list_add_tail(&smdev->list, &sm->devices);
 750	} else
 751		dev_err(sm->dev, "error registering %s (%d)\n",
 752			pdev->name, ret);
 753
 754	return ret;
 755}
 756
 757/* sm501_create_subio
 758 *
 759 * Fill in an IO resource for a sub device
 760*/
 761
 762static void sm501_create_subio(struct sm501_devdata *sm,
 763			       struct resource *res,
 764			       resource_size_t offs,
 765			       resource_size_t size)
 766{
 767	res->flags = IORESOURCE_MEM;
 768	res->parent = sm->io_res;
 769	res->start = sm->io_res->start + offs;
 770	res->end = res->start + size - 1;
 771}
 772
 773/* sm501_create_mem
 774 *
 775 * Fill in an MEM resource for a sub device
 776*/
 777
 778static void sm501_create_mem(struct sm501_devdata *sm,
 779			     struct resource *res,
 780			     resource_size_t *offs,
 781			     resource_size_t size)
 782{
 783	*offs -= size;		/* adjust memory size */
 784
 785	res->flags = IORESOURCE_MEM;
 786	res->parent = sm->mem_res;
 787	res->start = sm->mem_res->start + *offs;
 788	res->end = res->start + size - 1;
 789}
 790
 791/* sm501_create_irq
 792 *
 793 * Fill in an IRQ resource for a sub device
 794*/
 795
 796static void sm501_create_irq(struct sm501_devdata *sm,
 797			     struct resource *res)
 798{
 799	res->flags = IORESOURCE_IRQ;
 800	res->parent = NULL;
 801	res->start = res->end = sm->irq;
 802}
 803
 804static int sm501_register_usbhost(struct sm501_devdata *sm,
 805				  resource_size_t *mem_avail)
 806{
 807	struct platform_device *pdev;
 808
 809	pdev = sm501_create_subdev(sm, "sm501-usb", 3, 0);
 810	if (!pdev)
 811		return -ENOMEM;
 812
 813	sm501_create_subio(sm, &pdev->resource[0], 0x40000, 0x20000);
 814	sm501_create_mem(sm, &pdev->resource[1], mem_avail, 256*1024);
 815	sm501_create_irq(sm, &pdev->resource[2]);
 816
 817	return sm501_register_device(sm, pdev);
 818}
 819
 820static void sm501_setup_uart_data(struct sm501_devdata *sm,
 821				  struct plat_serial8250_port *uart_data,
 822				  unsigned int offset)
 823{
 824	uart_data->membase = sm->regs + offset;
 825	uart_data->mapbase = sm->io_res->start + offset;
 826	uart_data->iotype = UPIO_MEM;
 827	uart_data->irq = sm->irq;
 828	uart_data->flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ;
 829	uart_data->regshift = 2;
 830	uart_data->uartclk = (9600 * 16);
 831}
 832
 833static int sm501_register_uart(struct sm501_devdata *sm, int devices)
 834{
 835	struct platform_device *pdev;
 836	struct plat_serial8250_port *uart_data;
 837
 838	pdev = sm501_create_subdev(sm, "serial8250", 0,
 839				   sizeof(struct plat_serial8250_port) * 3);
 840	if (!pdev)
 841		return -ENOMEM;
 842
 843	uart_data = dev_get_platdata(&pdev->dev);
 844
 845	if (devices & SM501_USE_UART0) {
 846		sm501_setup_uart_data(sm, uart_data++, 0x30000);
 847		sm501_unit_power(sm->dev, SM501_GATE_UART0, 1);
 848		sm501_modify_reg(sm->dev, SM501_IRQ_MASK, 1 << 12, 0);
 849		sm501_modify_reg(sm->dev, SM501_GPIO63_32_CONTROL, 0x01e0, 0);
 850	}
 851	if (devices & SM501_USE_UART1) {
 852		sm501_setup_uart_data(sm, uart_data++, 0x30020);
 853		sm501_unit_power(sm->dev, SM501_GATE_UART1, 1);
 854		sm501_modify_reg(sm->dev, SM501_IRQ_MASK, 1 << 13, 0);
 855		sm501_modify_reg(sm->dev, SM501_GPIO63_32_CONTROL, 0x1e00, 0);
 856	}
 857
 858	pdev->id = PLAT8250_DEV_SM501;
 859
 860	return sm501_register_device(sm, pdev);
 861}
 862
 863static int sm501_register_display(struct sm501_devdata *sm,
 864				  resource_size_t *mem_avail)
 865{
 866	struct platform_device *pdev;
 867
 868	pdev = sm501_create_subdev(sm, "sm501-fb", 4, 0);
 869	if (!pdev)
 870		return -ENOMEM;
 871
 872	sm501_create_subio(sm, &pdev->resource[0], 0x80000, 0x10000);
 873	sm501_create_subio(sm, &pdev->resource[1], 0x100000, 0x50000);
 874	sm501_create_mem(sm, &pdev->resource[2], mem_avail, *mem_avail);
 875	sm501_create_irq(sm, &pdev->resource[3]);
 876
 877	return sm501_register_device(sm, pdev);
 878}
 879
 880#ifdef CONFIG_MFD_SM501_GPIO
 881
 882static inline struct sm501_devdata *sm501_gpio_to_dev(struct sm501_gpio *gpio)
 883{
 884	return container_of(gpio, struct sm501_devdata, gpio);
 885}
 886
 887static int sm501_gpio_get(struct gpio_chip *chip, unsigned offset)
 888
 889{
 890	struct sm501_gpio_chip *smgpio = gpiochip_get_data(chip);
 891	unsigned long result;
 892
 893	result = smc501_readl(smgpio->regbase + SM501_GPIO_DATA_LOW);
 894	result >>= offset;
 895
 896	return result & 1UL;
 897}
 898
 899static void sm501_gpio_ensure_gpio(struct sm501_gpio_chip *smchip,
 900				   unsigned long bit)
 901{
 902	unsigned long ctrl;
 903
 904	/* check and modify if this pin is not set as gpio. */
 905
 906	if (smc501_readl(smchip->control) & bit) {
 907		dev_info(sm501_gpio_to_dev(smchip->ourgpio)->dev,
 908			 "changing mode of gpio, bit %08lx\n", bit);
 909
 910		ctrl = smc501_readl(smchip->control);
 911		ctrl &= ~bit;
 912		smc501_writel(ctrl, smchip->control);
 913
 914		sm501_sync_regs(sm501_gpio_to_dev(smchip->ourgpio));
 915	}
 916}
 917
 918static void sm501_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 919
 920{
 921	struct sm501_gpio_chip *smchip = gpiochip_get_data(chip);
 922	struct sm501_gpio *smgpio = smchip->ourgpio;
 923	unsigned long bit = 1 << offset;
 924	void __iomem *regs = smchip->regbase;
 925	unsigned long save;
 926	unsigned long val;
 927
 928	dev_dbg(sm501_gpio_to_dev(smgpio)->dev, "%s(%p,%d)\n",
 929		__func__, chip, offset);
 930
 931	spin_lock_irqsave(&smgpio->lock, save);
 932
 933	val = smc501_readl(regs + SM501_GPIO_DATA_LOW) & ~bit;
 934	if (value)
 935		val |= bit;
 936	smc501_writel(val, regs);
 937
 938	sm501_sync_regs(sm501_gpio_to_dev(smgpio));
 939	sm501_gpio_ensure_gpio(smchip, bit);
 940
 941	spin_unlock_irqrestore(&smgpio->lock, save);
 942}
 943
 944static int sm501_gpio_input(struct gpio_chip *chip, unsigned offset)
 945{
 946	struct sm501_gpio_chip *smchip = gpiochip_get_data(chip);
 947	struct sm501_gpio *smgpio = smchip->ourgpio;
 948	void __iomem *regs = smchip->regbase;
 949	unsigned long bit = 1 << offset;
 950	unsigned long save;
 951	unsigned long ddr;
 952
 953	dev_dbg(sm501_gpio_to_dev(smgpio)->dev, "%s(%p,%d)\n",
 954		__func__, chip, offset);
 955
 956	spin_lock_irqsave(&smgpio->lock, save);
 957
 958	ddr = smc501_readl(regs + SM501_GPIO_DDR_LOW);
 959	smc501_writel(ddr & ~bit, regs + SM501_GPIO_DDR_LOW);
 960
 961	sm501_sync_regs(sm501_gpio_to_dev(smgpio));
 962	sm501_gpio_ensure_gpio(smchip, bit);
 963
 964	spin_unlock_irqrestore(&smgpio->lock, save);
 965
 966	return 0;
 967}
 968
 969static int sm501_gpio_output(struct gpio_chip *chip,
 970			     unsigned offset, int value)
 971{
 972	struct sm501_gpio_chip *smchip = gpiochip_get_data(chip);
 973	struct sm501_gpio *smgpio = smchip->ourgpio;
 974	unsigned long bit = 1 << offset;
 975	void __iomem *regs = smchip->regbase;
 976	unsigned long save;
 977	unsigned long val;
 978	unsigned long ddr;
 979
 980	dev_dbg(sm501_gpio_to_dev(smgpio)->dev, "%s(%p,%d,%d)\n",
 981		__func__, chip, offset, value);
 982
 983	spin_lock_irqsave(&smgpio->lock, save);
 984
 985	val = smc501_readl(regs + SM501_GPIO_DATA_LOW);
 986	if (value)
 987		val |= bit;
 988	else
 989		val &= ~bit;
 990	smc501_writel(val, regs);
 991
 992	ddr = smc501_readl(regs + SM501_GPIO_DDR_LOW);
 993	smc501_writel(ddr | bit, regs + SM501_GPIO_DDR_LOW);
 994
 995	sm501_sync_regs(sm501_gpio_to_dev(smgpio));
 996	smc501_writel(val, regs + SM501_GPIO_DATA_LOW);
 997
 998	sm501_sync_regs(sm501_gpio_to_dev(smgpio));
 999	spin_unlock_irqrestore(&smgpio->lock, save);
1000
1001	return 0;
1002}
1003
1004static const struct gpio_chip gpio_chip_template = {
1005	.ngpio			= 32,
1006	.direction_input	= sm501_gpio_input,
1007	.direction_output	= sm501_gpio_output,
1008	.set			= sm501_gpio_set,
1009	.get			= sm501_gpio_get,
1010};
1011
1012static int sm501_gpio_register_chip(struct sm501_devdata *sm,
1013					      struct sm501_gpio *gpio,
1014					      struct sm501_gpio_chip *chip)
1015{
1016	struct sm501_platdata *pdata = sm->platdata;
1017	struct gpio_chip *gchip = &chip->gpio;
1018	int base = pdata->gpio_base;
1019
1020	chip->gpio = gpio_chip_template;
1021
1022	if (chip == &gpio->high) {
1023		if (base > 0)
1024			base += 32;
1025		chip->regbase = gpio->regs + SM501_GPIO_DATA_HIGH;
1026		chip->control = sm->regs + SM501_GPIO63_32_CONTROL;
1027		gchip->label  = "SM501-HIGH";
1028	} else {
1029		chip->regbase = gpio->regs + SM501_GPIO_DATA_LOW;
1030		chip->control = sm->regs + SM501_GPIO31_0_CONTROL;
1031		gchip->label  = "SM501-LOW";
1032	}
1033
1034	gchip->base   = base;
1035	chip->ourgpio = gpio;
1036
1037	return gpiochip_add_data(gchip, chip);
1038}
1039
1040static int sm501_register_gpio(struct sm501_devdata *sm)
1041{
1042	struct sm501_gpio *gpio = &sm->gpio;
1043	resource_size_t iobase = sm->io_res->start + SM501_GPIO;
1044	int ret;
1045
1046	dev_dbg(sm->dev, "registering gpio block %08llx\n",
1047		(unsigned long long)iobase);
1048
1049	spin_lock_init(&gpio->lock);
1050
1051	gpio->regs_res = request_mem_region(iobase, 0x20, "sm501-gpio");
1052	if (!gpio->regs_res) {
1053		dev_err(sm->dev, "gpio: failed to request region\n");
1054		return -ENXIO;
1055	}
1056
1057	gpio->regs = ioremap(iobase, 0x20);
1058	if (!gpio->regs) {
1059		dev_err(sm->dev, "gpio: failed to remap registers\n");
1060		ret = -ENXIO;
1061		goto err_claimed;
1062	}
1063
1064	/* Register both our chips. */
1065
1066	ret = sm501_gpio_register_chip(sm, gpio, &gpio->low);
1067	if (ret) {
1068		dev_err(sm->dev, "failed to add low chip\n");
1069		goto err_mapped;
1070	}
1071
1072	ret = sm501_gpio_register_chip(sm, gpio, &gpio->high);
1073	if (ret) {
1074		dev_err(sm->dev, "failed to add high chip\n");
1075		goto err_low_chip;
1076	}
1077
1078	gpio->registered = 1;
1079
1080	return 0;
1081
1082 err_low_chip:
1083	gpiochip_remove(&gpio->low.gpio);
1084
1085 err_mapped:
1086	iounmap(gpio->regs);
1087
1088 err_claimed:
1089	release_mem_region(iobase, 0x20);
 
1090
1091	return ret;
1092}
1093
1094static void sm501_gpio_remove(struct sm501_devdata *sm)
1095{
1096	struct sm501_gpio *gpio = &sm->gpio;
1097	resource_size_t iobase = sm->io_res->start + SM501_GPIO;
1098
1099	if (!sm->gpio.registered)
1100		return;
1101
1102	gpiochip_remove(&gpio->low.gpio);
1103	gpiochip_remove(&gpio->high.gpio);
1104
1105	iounmap(gpio->regs);
1106	release_mem_region(iobase, 0x20);
 
 
 
 
 
 
 
 
 
1107}
1108
1109static inline int sm501_gpio_isregistered(struct sm501_devdata *sm)
1110{
1111	return sm->gpio.registered;
1112}
1113#else
1114static inline int sm501_register_gpio(struct sm501_devdata *sm)
1115{
1116	return 0;
1117}
1118
1119static inline void sm501_gpio_remove(struct sm501_devdata *sm)
1120{
1121}
1122
 
 
 
 
 
1123static inline int sm501_gpio_isregistered(struct sm501_devdata *sm)
1124{
1125	return 0;
1126}
1127#endif
1128
1129static int sm501_register_gpio_i2c_instance(struct sm501_devdata *sm,
1130					    struct sm501_platdata_gpio_i2c *iic)
1131{
1132	struct i2c_gpio_platform_data *icd;
1133	struct platform_device *pdev;
1134	struct gpiod_lookup_table *lookup;
1135
1136	pdev = sm501_create_subdev(sm, "i2c-gpio", 0,
1137				   sizeof(struct i2c_gpio_platform_data));
1138	if (!pdev)
1139		return -ENOMEM;
1140
1141	/* Create a gpiod lookup using gpiochip-local offsets */
1142	lookup = devm_kzalloc(&pdev->dev, struct_size(lookup, table, 3),
1143			      GFP_KERNEL);
1144	if (!lookup)
1145		return -ENOMEM;
1146
1147	lookup->dev_id = "i2c-gpio";
1148	lookup->table[0] = (struct gpiod_lookup)
1149		GPIO_LOOKUP_IDX(iic->pin_sda < 32 ? "SM501-LOW" : "SM501-HIGH",
1150				iic->pin_sda % 32, NULL, 0,
1151				GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN);
1152	lookup->table[1] = (struct gpiod_lookup)
1153		GPIO_LOOKUP_IDX(iic->pin_scl < 32 ? "SM501-LOW" : "SM501-HIGH",
1154				iic->pin_scl % 32, NULL, 1,
1155				GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN);
1156	gpiod_add_lookup_table(lookup);
1157
1158	icd = dev_get_platdata(&pdev->dev);
 
1159	icd->timeout = iic->timeout;
1160	icd->udelay = iic->udelay;
1161
1162	/* note, we can't use either of the pin numbers, as the i2c-gpio
1163	 * driver uses the platform.id field to generate the bus number
1164	 * to register with the i2c core; The i2c core doesn't have enough
1165	 * entries to deal with anything we currently use.
1166	*/
1167
1168	pdev->id = iic->bus_num;
1169
1170	dev_info(sm->dev, "registering i2c-%d: sda=%d, scl=%d\n",
1171		 iic->bus_num,
1172		 iic->pin_sda, iic->pin_scl);
1173
1174	return sm501_register_device(sm, pdev);
1175}
1176
1177static int sm501_register_gpio_i2c(struct sm501_devdata *sm,
1178				   struct sm501_platdata *pdata)
1179{
1180	struct sm501_platdata_gpio_i2c *iic = pdata->gpio_i2c;
1181	int index;
1182	int ret;
1183
1184	for (index = 0; index < pdata->gpio_i2c_nr; index++, iic++) {
1185		ret = sm501_register_gpio_i2c_instance(sm, iic);
1186		if (ret < 0)
1187			return ret;
1188	}
1189
1190	return 0;
1191}
1192
1193/* dbg_regs_show
1194 *
1195 * Debug attribute to attach to parent device to show core registers
1196*/
1197
1198static ssize_t dbg_regs_show(struct device *dev,
1199			     struct device_attribute *attr, char *buff)
1200{
1201	struct sm501_devdata *sm = dev_get_drvdata(dev)	;
1202	unsigned int reg;
1203	char *ptr = buff;
1204	int ret;
1205
1206	for (reg = 0x00; reg < 0x70; reg += 4) {
1207		ret = sprintf(ptr, "%08x = %08x\n",
1208			      reg, smc501_readl(sm->regs + reg));
1209		ptr += ret;
1210	}
1211
1212	return ptr - buff;
1213}
1214
1215
1216static DEVICE_ATTR_RO(dbg_regs);
1217
1218/* sm501_init_reg
1219 *
1220 * Helper function for the init code to setup a register
1221 *
1222 * clear the bits which are set in r->mask, and then set
1223 * the bits set in r->set.
1224*/
1225
1226static inline void sm501_init_reg(struct sm501_devdata *sm,
1227				  unsigned long reg,
1228				  struct sm501_reg_init *r)
1229{
1230	unsigned long tmp;
1231
1232	tmp = smc501_readl(sm->regs + reg);
1233	tmp &= ~r->mask;
1234	tmp |= r->set;
1235	smc501_writel(tmp, sm->regs + reg);
1236}
1237
1238/* sm501_init_regs
1239 *
1240 * Setup core register values
1241*/
1242
1243static void sm501_init_regs(struct sm501_devdata *sm,
1244			    struct sm501_initdata *init)
1245{
1246	sm501_misc_control(sm->dev,
1247			   init->misc_control.set,
1248			   init->misc_control.mask);
1249
1250	sm501_init_reg(sm, SM501_MISC_TIMING, &init->misc_timing);
1251	sm501_init_reg(sm, SM501_GPIO31_0_CONTROL, &init->gpio_low);
1252	sm501_init_reg(sm, SM501_GPIO63_32_CONTROL, &init->gpio_high);
1253
1254	if (init->m1xclk) {
1255		dev_info(sm->dev, "setting M1XCLK to %ld\n", init->m1xclk);
1256		sm501_set_clock(sm->dev, SM501_CLOCK_M1XCLK, init->m1xclk);
1257	}
1258
1259	if (init->mclk) {
1260		dev_info(sm->dev, "setting MCLK to %ld\n", init->mclk);
1261		sm501_set_clock(sm->dev, SM501_CLOCK_MCLK, init->mclk);
1262	}
1263
1264}
1265
1266/* Check the PLL sources for the M1CLK and M1XCLK
1267 *
1268 * If the M1CLK and M1XCLKs are not sourced from the same PLL, then
1269 * there is a risk (see errata AB-5) that the SM501 will cease proper
1270 * function. If this happens, then it is likely the SM501 will
1271 * hang the system.
1272*/
1273
1274static int sm501_check_clocks(struct sm501_devdata *sm)
1275{
1276	unsigned long pwrmode = smc501_readl(sm->regs + SM501_CURRENT_CLOCK);
1277	unsigned long msrc = (pwrmode & SM501_POWERMODE_M_SRC);
1278	unsigned long m1src = (pwrmode & SM501_POWERMODE_M1_SRC);
1279
1280	return ((msrc == 0 && m1src != 0) || (msrc != 0 && m1src == 0));
1281}
1282
1283static unsigned int sm501_mem_local[] = {
1284	[0]	= 4*1024*1024,
1285	[1]	= 8*1024*1024,
1286	[2]	= 16*1024*1024,
1287	[3]	= 32*1024*1024,
1288	[4]	= 64*1024*1024,
1289	[5]	= 2*1024*1024,
1290};
1291
1292/* sm501_init_dev
1293 *
1294 * Common init code for an SM501
1295*/
1296
1297static int sm501_init_dev(struct sm501_devdata *sm)
1298{
1299	struct sm501_initdata *idata;
1300	struct sm501_platdata *pdata;
1301	resource_size_t mem_avail;
1302	unsigned long dramctrl;
1303	unsigned long devid;
1304	int ret;
1305
1306	mutex_init(&sm->clock_lock);
1307	spin_lock_init(&sm->reg_lock);
1308
1309	INIT_LIST_HEAD(&sm->devices);
1310
1311	devid = smc501_readl(sm->regs + SM501_DEVICEID);
1312
1313	if ((devid & SM501_DEVICEID_IDMASK) != SM501_DEVICEID_SM501) {
1314		dev_err(sm->dev, "incorrect device id %08lx\n", devid);
1315		return -EINVAL;
1316	}
1317
1318	/* disable irqs */
1319	smc501_writel(0, sm->regs + SM501_IRQ_MASK);
1320
1321	dramctrl = smc501_readl(sm->regs + SM501_DRAM_CONTROL);
1322	mem_avail = sm501_mem_local[(dramctrl >> 13) & 0x7];
1323
1324	dev_info(sm->dev, "SM501 At %p: Version %08lx, %ld Mb, IRQ %d\n",
1325		 sm->regs, devid, (unsigned long)mem_avail >> 20, sm->irq);
1326
1327	sm->rev = devid & SM501_DEVICEID_REVMASK;
1328
1329	sm501_dump_gate(sm);
1330
1331	ret = device_create_file(sm->dev, &dev_attr_dbg_regs);
1332	if (ret)
1333		dev_err(sm->dev, "failed to create debug regs file\n");
1334
1335	sm501_dump_clk(sm);
1336
1337	/* check to see if we have some device initialisation */
1338
1339	pdata = sm->platdata;
1340	idata = pdata ? pdata->init : NULL;
1341
1342	if (idata) {
1343		sm501_init_regs(sm, idata);
1344
1345		if (idata->devices & SM501_USE_USB_HOST)
1346			sm501_register_usbhost(sm, &mem_avail);
1347		if (idata->devices & (SM501_USE_UART0 | SM501_USE_UART1))
1348			sm501_register_uart(sm, idata->devices);
1349		if (idata->devices & SM501_USE_GPIO)
1350			sm501_register_gpio(sm);
1351	}
1352
1353	if (pdata && pdata->gpio_i2c && pdata->gpio_i2c_nr > 0) {
1354		if (!sm501_gpio_isregistered(sm))
1355			dev_err(sm->dev, "no gpio available for i2c gpio.\n");
1356		else
1357			sm501_register_gpio_i2c(sm, pdata);
1358	}
1359
1360	ret = sm501_check_clocks(sm);
1361	if (ret) {
1362		dev_err(sm->dev, "M1X and M clocks sourced from different "
1363					"PLLs\n");
1364		return -EINVAL;
1365	}
1366
1367	/* always create a framebuffer */
1368	sm501_register_display(sm, &mem_avail);
1369
1370	return 0;
1371}
1372
1373static int sm501_plat_probe(struct platform_device *dev)
1374{
1375	struct sm501_devdata *sm;
1376	int ret;
1377
1378	sm = kzalloc(sizeof(*sm), GFP_KERNEL);
1379	if (!sm) {
 
1380		ret = -ENOMEM;
1381		goto err1;
1382	}
1383
1384	sm->dev = &dev->dev;
1385	sm->pdev_id = dev->id;
1386	sm->platdata = dev_get_platdata(&dev->dev);
1387
1388	ret = platform_get_irq(dev, 0);
1389	if (ret < 0)
 
1390		goto err_res;
 
1391	sm->irq = ret;
1392
1393	sm->io_res = platform_get_resource(dev, IORESOURCE_MEM, 1);
1394	sm->mem_res = platform_get_resource(dev, IORESOURCE_MEM, 0);
1395	if (!sm->io_res || !sm->mem_res) {
 
1396		dev_err(&dev->dev, "failed to get IO resource\n");
1397		ret = -ENOENT;
1398		goto err_res;
1399	}
1400
1401	sm->regs_claim = request_mem_region(sm->io_res->start,
1402					    0x100, "sm501");
1403	if (!sm->regs_claim) {
 
1404		dev_err(&dev->dev, "cannot claim registers\n");
1405		ret = -EBUSY;
1406		goto err_res;
1407	}
1408
1409	platform_set_drvdata(dev, sm);
1410
1411	sm->regs = ioremap(sm->io_res->start, resource_size(sm->io_res));
1412	if (!sm->regs) {
 
1413		dev_err(&dev->dev, "cannot remap registers\n");
1414		ret = -EIO;
1415		goto err_claim;
1416	}
1417
1418	ret = sm501_init_dev(sm);
1419	if (ret)
1420		goto err_unmap;
1421
1422	return 0;
1423
1424 err_unmap:
1425	iounmap(sm->regs);
1426 err_claim:
1427	release_mem_region(sm->io_res->start, 0x100);
 
1428 err_res:
1429	kfree(sm);
1430 err1:
1431	return ret;
1432
1433}
1434
 
 
1435/* power management support */
1436
1437static void sm501_set_power(struct sm501_devdata *sm, int on)
1438{
1439	struct sm501_platdata *pd = sm->platdata;
1440
1441	if (!pd)
1442		return;
1443
1444	if (pd->get_power) {
1445		if (pd->get_power(sm->dev) == on) {
1446			dev_dbg(sm->dev, "is already %d\n", on);
1447			return;
1448		}
1449	}
1450
1451	if (pd->set_power) {
1452		dev_dbg(sm->dev, "setting power to %d\n", on);
1453
1454		pd->set_power(sm->dev, on);
1455		sm501_mdelay(sm, 10);
1456	}
1457}
1458
1459static int sm501_plat_suspend(struct platform_device *pdev, pm_message_t state)
1460{
1461	struct sm501_devdata *sm = platform_get_drvdata(pdev);
1462
1463	sm->in_suspend = 1;
1464	sm->pm_misc = smc501_readl(sm->regs + SM501_MISC_CONTROL);
1465
1466	sm501_dump_regs(sm);
1467
1468	if (sm->platdata) {
1469		if (sm->platdata->flags & SM501_FLAG_SUSPEND_OFF)
1470			sm501_set_power(sm, 0);
1471	}
1472
1473	return 0;
1474}
1475
1476static int sm501_plat_resume(struct platform_device *pdev)
1477{
1478	struct sm501_devdata *sm = platform_get_drvdata(pdev);
1479
1480	sm501_set_power(sm, 1);
1481
1482	sm501_dump_regs(sm);
1483	sm501_dump_gate(sm);
1484	sm501_dump_clk(sm);
1485
1486	/* check to see if we are in the same state as when suspended */
1487
1488	if (smc501_readl(sm->regs + SM501_MISC_CONTROL) != sm->pm_misc) {
1489		dev_info(sm->dev, "SM501_MISC_CONTROL changed over sleep\n");
1490		smc501_writel(sm->pm_misc, sm->regs + SM501_MISC_CONTROL);
1491
1492		/* our suspend causes the controller state to change,
1493		 * either by something attempting setup, power loss,
1494		 * or an external reset event on power change */
1495
1496		if (sm->platdata && sm->platdata->init) {
1497			sm501_init_regs(sm, sm->platdata->init);
1498		}
1499	}
1500
1501	/* dump our state from resume */
1502
1503	sm501_dump_regs(sm);
1504	sm501_dump_clk(sm);
1505
1506	sm->in_suspend = 0;
1507
1508	return 0;
1509}
 
 
 
 
1510
1511/* Initialisation data for PCI devices */
1512
1513static struct sm501_initdata sm501_pci_initdata = {
1514	.gpio_high	= {
1515		.set	= 0x3F000000,		/* 24bit panel */
1516		.mask	= 0x0,
1517	},
1518	.misc_timing	= {
1519		.set	= 0x010100,		/* SDRAM timing */
1520		.mask	= 0x1F1F00,
1521	},
1522	.misc_control	= {
1523		.set	= SM501_MISC_PNL_24BIT,
1524		.mask	= 0,
1525	},
1526
1527	.devices	= SM501_USE_ALL,
1528
1529	/* Errata AB-3 says that 72MHz is the fastest available
1530	 * for 33MHZ PCI with proper bus-mastering operation */
1531
1532	.mclk		= 72 * MHZ,
1533	.m1xclk		= 144 * MHZ,
1534};
1535
1536static struct sm501_platdata_fbsub sm501_pdata_fbsub = {
1537	.flags		= (SM501FB_FLAG_USE_INIT_MODE |
1538			   SM501FB_FLAG_USE_HWCURSOR |
1539			   SM501FB_FLAG_USE_HWACCEL |
1540			   SM501FB_FLAG_DISABLE_AT_EXIT),
1541};
1542
1543static struct sm501_platdata_fb sm501_fb_pdata = {
1544	.fb_route	= SM501_FB_OWN,
1545	.fb_crt		= &sm501_pdata_fbsub,
1546	.fb_pnl		= &sm501_pdata_fbsub,
1547};
1548
1549static struct sm501_platdata sm501_pci_platdata = {
1550	.init		= &sm501_pci_initdata,
1551	.fb		= &sm501_fb_pdata,
1552	.gpio_base	= -1,
1553};
1554
1555static int sm501_pci_probe(struct pci_dev *dev,
1556				     const struct pci_device_id *id)
1557{
1558	struct sm501_devdata *sm;
1559	int err;
1560
1561	sm = kzalloc(sizeof(*sm), GFP_KERNEL);
1562	if (!sm) {
 
1563		err = -ENOMEM;
1564		goto err1;
1565	}
1566
1567	/* set a default set of platform data */
1568	dev->dev.platform_data = sm->platdata = &sm501_pci_platdata;
1569
1570	/* set a hopefully unique id for our child platform devices */
1571	sm->pdev_id = 32 + dev->devfn;
1572
1573	pci_set_drvdata(dev, sm);
1574
1575	err = pci_enable_device(dev);
1576	if (err) {
1577		dev_err(&dev->dev, "cannot enable device\n");
1578		goto err2;
1579	}
1580
1581	sm->dev = &dev->dev;
1582	sm->irq = dev->irq;
1583
1584#ifdef __BIG_ENDIAN
1585	/* if the system is big-endian, we most probably have a
1586	 * translation in the IO layer making the PCI bus little endian
1587	 * so make the framebuffer swapped pixels */
1588
1589	sm501_fb_pdata.flags |= SM501_FBPD_SWAP_FB_ENDIAN;
1590#endif
1591
1592	/* check our resources */
1593
1594	if (!(pci_resource_flags(dev, 0) & IORESOURCE_MEM)) {
1595		dev_err(&dev->dev, "region #0 is not memory?\n");
1596		err = -EINVAL;
1597		goto err3;
1598	}
1599
1600	if (!(pci_resource_flags(dev, 1) & IORESOURCE_MEM)) {
1601		dev_err(&dev->dev, "region #1 is not memory?\n");
1602		err = -EINVAL;
1603		goto err3;
1604	}
1605
1606	/* make our resources ready for sharing */
1607
1608	sm->io_res = &dev->resource[1];
1609	sm->mem_res = &dev->resource[0];
1610
1611	sm->regs_claim = request_mem_region(sm->io_res->start,
1612					    0x100, "sm501");
1613	if (!sm->regs_claim) {
1614		dev_err(&dev->dev, "cannot claim registers\n");
1615		err= -EBUSY;
1616		goto err3;
1617	}
1618
1619	sm->regs = pci_ioremap_bar(dev, 1);
1620	if (!sm->regs) {
 
1621		dev_err(&dev->dev, "cannot remap registers\n");
1622		err = -EIO;
1623		goto err4;
1624	}
1625
1626	sm501_init_dev(sm);
1627	return 0;
1628
1629 err4:
1630	release_mem_region(sm->io_res->start, 0x100);
 
1631 err3:
1632	pci_disable_device(dev);
1633 err2:
1634	kfree(sm);
1635 err1:
1636	return err;
1637}
1638
1639static void sm501_remove_sub(struct sm501_devdata *sm,
1640			     struct sm501_device *smdev)
1641{
1642	list_del(&smdev->list);
1643	platform_device_unregister(&smdev->pdev);
1644}
1645
1646static void sm501_dev_remove(struct sm501_devdata *sm)
1647{
1648	struct sm501_device *smdev, *tmp;
1649
1650	list_for_each_entry_safe(smdev, tmp, &sm->devices, list)
1651		sm501_remove_sub(sm, smdev);
1652
1653	device_remove_file(sm->dev, &dev_attr_dbg_regs);
1654
1655	sm501_gpio_remove(sm);
1656}
1657
1658static void sm501_pci_remove(struct pci_dev *dev)
1659{
1660	struct sm501_devdata *sm = pci_get_drvdata(dev);
1661
1662	sm501_dev_remove(sm);
1663	iounmap(sm->regs);
1664
1665	release_mem_region(sm->io_res->start, 0x100);
 
1666
1667	pci_disable_device(dev);
1668}
1669
1670static void sm501_plat_remove(struct platform_device *dev)
1671{
1672	struct sm501_devdata *sm = platform_get_drvdata(dev);
1673
1674	sm501_dev_remove(sm);
1675	iounmap(sm->regs);
1676
1677	release_mem_region(sm->io_res->start, 0x100);
 
 
 
1678}
1679
1680static const struct pci_device_id sm501_pci_tbl[] = {
1681	{ 0x126f, 0x0501, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
1682	{ 0, },
1683};
1684
1685MODULE_DEVICE_TABLE(pci, sm501_pci_tbl);
1686
1687static struct pci_driver sm501_pci_driver = {
1688	.name		= "sm501",
1689	.id_table	= sm501_pci_tbl,
1690	.probe		= sm501_pci_probe,
1691	.remove		= sm501_pci_remove,
1692};
1693
1694MODULE_ALIAS("platform:sm501");
1695
1696static const struct of_device_id of_sm501_match_tbl[] = {
1697	{ .compatible = "smi,sm501", },
1698	{ /* end */ }
1699};
1700MODULE_DEVICE_TABLE(of, of_sm501_match_tbl);
1701
1702static struct platform_driver sm501_plat_driver = {
1703	.driver		= {
1704		.name	= "sm501",
1705		.of_match_table = of_sm501_match_tbl,
1706	},
1707	.probe		= sm501_plat_probe,
1708	.remove_new	= sm501_plat_remove,
1709	.suspend	= pm_sleep_ptr(sm501_plat_suspend),
1710	.resume		= pm_sleep_ptr(sm501_plat_resume),
1711};
1712
1713static int __init sm501_base_init(void)
1714{
1715	int ret;
1716
1717	ret = platform_driver_register(&sm501_plat_driver);
1718	if (ret < 0)
1719		return ret;
1720
1721	return pci_register_driver(&sm501_pci_driver);
1722}
1723
1724static void __exit sm501_base_exit(void)
1725{
1726	platform_driver_unregister(&sm501_plat_driver);
1727	pci_unregister_driver(&sm501_pci_driver);
1728}
1729
1730module_init(sm501_base_init);
1731module_exit(sm501_base_exit);
1732
1733MODULE_DESCRIPTION("SM501 Core Driver");
1734MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>, Vincent Sanders");
1735MODULE_LICENSE("GPL v2");