Loading...
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Copyright (c) 2012 Samsung Electronics Co., Ltd.
4 * http://www.samsung.com
5 *
6 * Copyright (C) 2010 Samsung Electronics Co. Ltd.
7 * Jaswinder Singh <jassi.brar@samsung.com>
8 */
9
10#include <linux/debugfs.h>
11#include <linux/kernel.h>
12#include <linux/io.h>
13#include <linux/init.h>
14#include <linux/slab.h>
15#include <linux/module.h>
16#include <linux/string.h>
17#include <linux/delay.h>
18#include <linux/interrupt.h>
19#include <linux/dma-mapping.h>
20#include <linux/dmaengine.h>
21#include <linux/amba/bus.h>
22#include <linux/scatterlist.h>
23#include <linux/of.h>
24#include <linux/of_dma.h>
25#include <linux/err.h>
26#include <linux/pm_runtime.h>
27#include <linux/bug.h>
28#include <linux/reset.h>
29
30#include "dmaengine.h"
31#define PL330_MAX_CHAN 8
32#define PL330_MAX_IRQS 32
33#define PL330_MAX_PERI 32
34#define PL330_MAX_BURST 16
35
36#define PL330_QUIRK_BROKEN_NO_FLUSHP BIT(0)
37#define PL330_QUIRK_PERIPH_BURST BIT(1)
38
39enum pl330_cachectrl {
40 CCTRL0, /* Noncacheable and nonbufferable */
41 CCTRL1, /* Bufferable only */
42 CCTRL2, /* Cacheable, but do not allocate */
43 CCTRL3, /* Cacheable and bufferable, but do not allocate */
44 INVALID1, /* AWCACHE = 0x1000 */
45 INVALID2,
46 CCTRL6, /* Cacheable write-through, allocate on writes only */
47 CCTRL7, /* Cacheable write-back, allocate on writes only */
48};
49
50enum pl330_byteswap {
51 SWAP_NO,
52 SWAP_2,
53 SWAP_4,
54 SWAP_8,
55 SWAP_16,
56};
57
58/* Register and Bit field Definitions */
59#define DS 0x0
60#define DS_ST_STOP 0x0
61#define DS_ST_EXEC 0x1
62#define DS_ST_CMISS 0x2
63#define DS_ST_UPDTPC 0x3
64#define DS_ST_WFE 0x4
65#define DS_ST_ATBRR 0x5
66#define DS_ST_QBUSY 0x6
67#define DS_ST_WFP 0x7
68#define DS_ST_KILL 0x8
69#define DS_ST_CMPLT 0x9
70#define DS_ST_FLTCMP 0xe
71#define DS_ST_FAULT 0xf
72
73#define DPC 0x4
74#define INTEN 0x20
75#define ES 0x24
76#define INTSTATUS 0x28
77#define INTCLR 0x2c
78#define FSM 0x30
79#define FSC 0x34
80#define FTM 0x38
81
82#define _FTC 0x40
83#define FTC(n) (_FTC + (n)*0x4)
84
85#define _CS 0x100
86#define CS(n) (_CS + (n)*0x8)
87#define CS_CNS (1 << 21)
88
89#define _CPC 0x104
90#define CPC(n) (_CPC + (n)*0x8)
91
92#define _SA 0x400
93#define SA(n) (_SA + (n)*0x20)
94
95#define _DA 0x404
96#define DA(n) (_DA + (n)*0x20)
97
98#define _CC 0x408
99#define CC(n) (_CC + (n)*0x20)
100
101#define CC_SRCINC (1 << 0)
102#define CC_DSTINC (1 << 14)
103#define CC_SRCPRI (1 << 8)
104#define CC_DSTPRI (1 << 22)
105#define CC_SRCNS (1 << 9)
106#define CC_DSTNS (1 << 23)
107#define CC_SRCIA (1 << 10)
108#define CC_DSTIA (1 << 24)
109#define CC_SRCBRSTLEN_SHFT 4
110#define CC_DSTBRSTLEN_SHFT 18
111#define CC_SRCBRSTSIZE_SHFT 1
112#define CC_DSTBRSTSIZE_SHFT 15
113#define CC_SRCCCTRL_SHFT 11
114#define CC_SRCCCTRL_MASK 0x7
115#define CC_DSTCCTRL_SHFT 25
116#define CC_DRCCCTRL_MASK 0x7
117#define CC_SWAP_SHFT 28
118
119#define _LC0 0x40c
120#define LC0(n) (_LC0 + (n)*0x20)
121
122#define _LC1 0x410
123#define LC1(n) (_LC1 + (n)*0x20)
124
125#define DBGSTATUS 0xd00
126#define DBG_BUSY (1 << 0)
127
128#define DBGCMD 0xd04
129#define DBGINST0 0xd08
130#define DBGINST1 0xd0c
131
132#define CR0 0xe00
133#define CR1 0xe04
134#define CR2 0xe08
135#define CR3 0xe0c
136#define CR4 0xe10
137#define CRD 0xe14
138
139#define PERIPH_ID 0xfe0
140#define PERIPH_REV_SHIFT 20
141#define PERIPH_REV_MASK 0xf
142#define PERIPH_REV_R0P0 0
143#define PERIPH_REV_R1P0 1
144#define PERIPH_REV_R1P1 2
145
146#define CR0_PERIPH_REQ_SET (1 << 0)
147#define CR0_BOOT_EN_SET (1 << 1)
148#define CR0_BOOT_MAN_NS (1 << 2)
149#define CR0_NUM_CHANS_SHIFT 4
150#define CR0_NUM_CHANS_MASK 0x7
151#define CR0_NUM_PERIPH_SHIFT 12
152#define CR0_NUM_PERIPH_MASK 0x1f
153#define CR0_NUM_EVENTS_SHIFT 17
154#define CR0_NUM_EVENTS_MASK 0x1f
155
156#define CR1_ICACHE_LEN_SHIFT 0
157#define CR1_ICACHE_LEN_MASK 0x7
158#define CR1_NUM_ICACHELINES_SHIFT 4
159#define CR1_NUM_ICACHELINES_MASK 0xf
160
161#define CRD_DATA_WIDTH_SHIFT 0
162#define CRD_DATA_WIDTH_MASK 0x7
163#define CRD_WR_CAP_SHIFT 4
164#define CRD_WR_CAP_MASK 0x7
165#define CRD_WR_Q_DEP_SHIFT 8
166#define CRD_WR_Q_DEP_MASK 0xf
167#define CRD_RD_CAP_SHIFT 12
168#define CRD_RD_CAP_MASK 0x7
169#define CRD_RD_Q_DEP_SHIFT 16
170#define CRD_RD_Q_DEP_MASK 0xf
171#define CRD_DATA_BUFF_SHIFT 20
172#define CRD_DATA_BUFF_MASK 0x3ff
173
174#define PART 0x330
175#define DESIGNER 0x41
176#define REVISION 0x0
177#define INTEG_CFG 0x0
178#define PERIPH_ID_VAL ((PART << 0) | (DESIGNER << 12))
179
180#define PL330_STATE_STOPPED (1 << 0)
181#define PL330_STATE_EXECUTING (1 << 1)
182#define PL330_STATE_WFE (1 << 2)
183#define PL330_STATE_FAULTING (1 << 3)
184#define PL330_STATE_COMPLETING (1 << 4)
185#define PL330_STATE_WFP (1 << 5)
186#define PL330_STATE_KILLING (1 << 6)
187#define PL330_STATE_FAULT_COMPLETING (1 << 7)
188#define PL330_STATE_CACHEMISS (1 << 8)
189#define PL330_STATE_UPDTPC (1 << 9)
190#define PL330_STATE_ATBARRIER (1 << 10)
191#define PL330_STATE_QUEUEBUSY (1 << 11)
192#define PL330_STATE_INVALID (1 << 15)
193
194#define PL330_STABLE_STATES (PL330_STATE_STOPPED | PL330_STATE_EXECUTING \
195 | PL330_STATE_WFE | PL330_STATE_FAULTING)
196
197#define CMD_DMAADDH 0x54
198#define CMD_DMAEND 0x00
199#define CMD_DMAFLUSHP 0x35
200#define CMD_DMAGO 0xa0
201#define CMD_DMALD 0x04
202#define CMD_DMALDP 0x25
203#define CMD_DMALP 0x20
204#define CMD_DMALPEND 0x28
205#define CMD_DMAKILL 0x01
206#define CMD_DMAMOV 0xbc
207#define CMD_DMANOP 0x18
208#define CMD_DMARMB 0x12
209#define CMD_DMASEV 0x34
210#define CMD_DMAST 0x08
211#define CMD_DMASTP 0x29
212#define CMD_DMASTZ 0x0c
213#define CMD_DMAWFE 0x36
214#define CMD_DMAWFP 0x30
215#define CMD_DMAWMB 0x13
216
217#define SZ_DMAADDH 3
218#define SZ_DMAEND 1
219#define SZ_DMAFLUSHP 2
220#define SZ_DMALD 1
221#define SZ_DMALDP 2
222#define SZ_DMALP 2
223#define SZ_DMALPEND 2
224#define SZ_DMAKILL 1
225#define SZ_DMAMOV 6
226#define SZ_DMANOP 1
227#define SZ_DMARMB 1
228#define SZ_DMASEV 2
229#define SZ_DMAST 1
230#define SZ_DMASTP 2
231#define SZ_DMASTZ 1
232#define SZ_DMAWFE 2
233#define SZ_DMAWFP 2
234#define SZ_DMAWMB 1
235#define SZ_DMAGO 6
236
237#define BRST_LEN(ccr) ((((ccr) >> CC_SRCBRSTLEN_SHFT) & 0xf) + 1)
238#define BRST_SIZE(ccr) (1 << (((ccr) >> CC_SRCBRSTSIZE_SHFT) & 0x7))
239
240#define BYTE_TO_BURST(b, ccr) ((b) / BRST_SIZE(ccr) / BRST_LEN(ccr))
241#define BURST_TO_BYTE(c, ccr) ((c) * BRST_SIZE(ccr) * BRST_LEN(ccr))
242
243/*
244 * With 256 bytes, we can do more than 2.5MB and 5MB xfers per req
245 * at 1byte/burst for P<->M and M<->M respectively.
246 * For typical scenario, at 1word/burst, 10MB and 20MB xfers per req
247 * should be enough for P<->M and M<->M respectively.
248 */
249#define MCODE_BUFF_PER_REQ 256
250
251/* Use this _only_ to wait on transient states */
252#define UNTIL(t, s) while (!(_state(t) & (s))) cpu_relax();
253
254#ifdef PL330_DEBUG_MCGEN
255static unsigned cmd_line;
256#define PL330_DBGCMD_DUMP(off, x...) do { \
257 printk("%x:", cmd_line); \
258 printk(KERN_CONT x); \
259 cmd_line += off; \
260 } while (0)
261#define PL330_DBGMC_START(addr) (cmd_line = addr)
262#else
263#define PL330_DBGCMD_DUMP(off, x...) do {} while (0)
264#define PL330_DBGMC_START(addr) do {} while (0)
265#endif
266
267/* The number of default descriptors */
268
269#define NR_DEFAULT_DESC 16
270
271/* Delay for runtime PM autosuspend, ms */
272#define PL330_AUTOSUSPEND_DELAY 20
273
274/* Populated by the PL330 core driver for DMA API driver's info */
275struct pl330_config {
276 u32 periph_id;
277#define DMAC_MODE_NS (1 << 0)
278 unsigned int mode;
279 unsigned int data_bus_width:10; /* In number of bits */
280 unsigned int data_buf_dep:11;
281 unsigned int num_chan:4;
282 unsigned int num_peri:6;
283 u32 peri_ns;
284 unsigned int num_events:6;
285 u32 irq_ns;
286};
287
288/*
289 * Request Configuration.
290 * The PL330 core does not modify this and uses the last
291 * working configuration if the request doesn't provide any.
292 *
293 * The Client may want to provide this info only for the
294 * first request and a request with new settings.
295 */
296struct pl330_reqcfg {
297 /* Address Incrementing */
298 unsigned dst_inc:1;
299 unsigned src_inc:1;
300
301 /*
302 * For now, the SRC & DST protection levels
303 * and burst size/length are assumed same.
304 */
305 bool nonsecure;
306 bool privileged;
307 bool insnaccess;
308 unsigned brst_len:5;
309 unsigned brst_size:3; /* in power of 2 */
310
311 enum pl330_cachectrl dcctl;
312 enum pl330_cachectrl scctl;
313 enum pl330_byteswap swap;
314 struct pl330_config *pcfg;
315};
316
317/*
318 * One cycle of DMAC operation.
319 * There may be more than one xfer in a request.
320 */
321struct pl330_xfer {
322 u32 src_addr;
323 u32 dst_addr;
324 /* Size to xfer */
325 u32 bytes;
326};
327
328/* The xfer callbacks are made with one of these arguments. */
329enum pl330_op_err {
330 /* The all xfers in the request were success. */
331 PL330_ERR_NONE,
332 /* If req aborted due to global error. */
333 PL330_ERR_ABORT,
334 /* If req failed due to problem with Channel. */
335 PL330_ERR_FAIL,
336};
337
338enum dmamov_dst {
339 SAR = 0,
340 CCR,
341 DAR,
342};
343
344enum pl330_dst {
345 SRC = 0,
346 DST,
347};
348
349enum pl330_cond {
350 SINGLE,
351 BURST,
352 ALWAYS,
353};
354
355struct dma_pl330_desc;
356
357struct _pl330_req {
358 u32 mc_bus;
359 void *mc_cpu;
360 struct dma_pl330_desc *desc;
361};
362
363/* ToBeDone for tasklet */
364struct _pl330_tbd {
365 bool reset_dmac;
366 bool reset_mngr;
367 u8 reset_chan;
368};
369
370/* A DMAC Thread */
371struct pl330_thread {
372 u8 id;
373 int ev;
374 /* If the channel is not yet acquired by any client */
375 bool free;
376 /* Parent DMAC */
377 struct pl330_dmac *dmac;
378 /* Only two at a time */
379 struct _pl330_req req[2];
380 /* Index of the last enqueued request */
381 unsigned lstenq;
382 /* Index of the last submitted request or -1 if the DMA is stopped */
383 int req_running;
384};
385
386enum pl330_dmac_state {
387 UNINIT,
388 INIT,
389 DYING,
390};
391
392enum desc_status {
393 /* In the DMAC pool */
394 FREE,
395 /*
396 * Allocated to some channel during prep_xxx
397 * Also may be sitting on the work_list.
398 */
399 PREP,
400 /*
401 * Sitting on the work_list and already submitted
402 * to the PL330 core. Not more than two descriptors
403 * of a channel can be BUSY at any time.
404 */
405 BUSY,
406 /*
407 * Pause was called while descriptor was BUSY. Due to hardware
408 * limitations, only termination is possible for descriptors
409 * that have been paused.
410 */
411 PAUSED,
412 /*
413 * Sitting on the channel work_list but xfer done
414 * by PL330 core
415 */
416 DONE,
417};
418
419struct dma_pl330_chan {
420 /* Schedule desc completion */
421 struct tasklet_struct task;
422
423 /* DMA-Engine Channel */
424 struct dma_chan chan;
425
426 /* List of submitted descriptors */
427 struct list_head submitted_list;
428 /* List of issued descriptors */
429 struct list_head work_list;
430 /* List of completed descriptors */
431 struct list_head completed_list;
432
433 /* Pointer to the DMAC that manages this channel,
434 * NULL if the channel is available to be acquired.
435 * As the parent, this DMAC also provides descriptors
436 * to the channel.
437 */
438 struct pl330_dmac *dmac;
439
440 /* To protect channel manipulation */
441 spinlock_t lock;
442
443 /*
444 * Hardware channel thread of PL330 DMAC. NULL if the channel is
445 * available.
446 */
447 struct pl330_thread *thread;
448
449 /* For D-to-M and M-to-D channels */
450 int burst_sz; /* the peripheral fifo width */
451 int burst_len; /* the number of burst */
452 phys_addr_t fifo_addr;
453 /* DMA-mapped view of the FIFO; may differ if an IOMMU is present */
454 dma_addr_t fifo_dma;
455 enum dma_data_direction dir;
456 struct dma_slave_config slave_config;
457
458 /* for cyclic capability */
459 bool cyclic;
460
461 /* for runtime pm tracking */
462 bool active;
463};
464
465struct pl330_dmac {
466 /* DMA-Engine Device */
467 struct dma_device ddma;
468
469 /* Pool of descriptors available for the DMAC's channels */
470 struct list_head desc_pool;
471 /* To protect desc_pool manipulation */
472 spinlock_t pool_lock;
473
474 /* Size of MicroCode buffers for each channel. */
475 unsigned mcbufsz;
476 /* ioremap'ed address of PL330 registers. */
477 void __iomem *base;
478 /* Populated by the PL330 core driver during pl330_add */
479 struct pl330_config pcfg;
480
481 spinlock_t lock;
482 /* Maximum possible events/irqs */
483 int events[32];
484 /* BUS address of MicroCode buffer */
485 dma_addr_t mcode_bus;
486 /* CPU address of MicroCode buffer */
487 void *mcode_cpu;
488 /* List of all Channel threads */
489 struct pl330_thread *channels;
490 /* Pointer to the MANAGER thread */
491 struct pl330_thread *manager;
492 /* To handle bad news in interrupt */
493 struct tasklet_struct tasks;
494 struct _pl330_tbd dmac_tbd;
495 /* State of DMAC operation */
496 enum pl330_dmac_state state;
497 /* Holds list of reqs with due callbacks */
498 struct list_head req_done;
499
500 /* Peripheral channels connected to this DMAC */
501 unsigned int num_peripherals;
502 struct dma_pl330_chan *peripherals; /* keep at end */
503 int quirks;
504
505 struct reset_control *rstc;
506 struct reset_control *rstc_ocp;
507};
508
509static struct pl330_of_quirks {
510 char *quirk;
511 int id;
512} of_quirks[] = {
513 {
514 .quirk = "arm,pl330-broken-no-flushp",
515 .id = PL330_QUIRK_BROKEN_NO_FLUSHP,
516 },
517 {
518 .quirk = "arm,pl330-periph-burst",
519 .id = PL330_QUIRK_PERIPH_BURST,
520 }
521};
522
523struct dma_pl330_desc {
524 /* To attach to a queue as child */
525 struct list_head node;
526
527 /* Descriptor for the DMA Engine API */
528 struct dma_async_tx_descriptor txd;
529
530 /* Xfer for PL330 core */
531 struct pl330_xfer px;
532
533 struct pl330_reqcfg rqcfg;
534
535 enum desc_status status;
536
537 int bytes_requested;
538 bool last;
539
540 /* The channel which currently holds this desc */
541 struct dma_pl330_chan *pchan;
542
543 enum dma_transfer_direction rqtype;
544 /* Index of peripheral for the xfer. */
545 unsigned peri:5;
546 /* Hook to attach to DMAC's list of reqs with due callback */
547 struct list_head rqd;
548};
549
550struct _xfer_spec {
551 u32 ccr;
552 struct dma_pl330_desc *desc;
553};
554
555static int pl330_config_write(struct dma_chan *chan,
556 struct dma_slave_config *slave_config,
557 enum dma_transfer_direction direction);
558
559static inline bool _queue_full(struct pl330_thread *thrd)
560{
561 return thrd->req[0].desc != NULL && thrd->req[1].desc != NULL;
562}
563
564static inline bool is_manager(struct pl330_thread *thrd)
565{
566 return thrd->dmac->manager == thrd;
567}
568
569/* If manager of the thread is in Non-Secure mode */
570static inline bool _manager_ns(struct pl330_thread *thrd)
571{
572 return (thrd->dmac->pcfg.mode & DMAC_MODE_NS) ? true : false;
573}
574
575static inline u32 get_revision(u32 periph_id)
576{
577 return (periph_id >> PERIPH_REV_SHIFT) & PERIPH_REV_MASK;
578}
579
580static inline u32 _emit_END(unsigned dry_run, u8 buf[])
581{
582 if (dry_run)
583 return SZ_DMAEND;
584
585 buf[0] = CMD_DMAEND;
586
587 PL330_DBGCMD_DUMP(SZ_DMAEND, "\tDMAEND\n");
588
589 return SZ_DMAEND;
590}
591
592static inline u32 _emit_FLUSHP(unsigned dry_run, u8 buf[], u8 peri)
593{
594 if (dry_run)
595 return SZ_DMAFLUSHP;
596
597 buf[0] = CMD_DMAFLUSHP;
598
599 peri &= 0x1f;
600 peri <<= 3;
601 buf[1] = peri;
602
603 PL330_DBGCMD_DUMP(SZ_DMAFLUSHP, "\tDMAFLUSHP %u\n", peri >> 3);
604
605 return SZ_DMAFLUSHP;
606}
607
608static inline u32 _emit_LD(unsigned dry_run, u8 buf[], enum pl330_cond cond)
609{
610 if (dry_run)
611 return SZ_DMALD;
612
613 buf[0] = CMD_DMALD;
614
615 if (cond == SINGLE)
616 buf[0] |= (0 << 1) | (1 << 0);
617 else if (cond == BURST)
618 buf[0] |= (1 << 1) | (1 << 0);
619
620 PL330_DBGCMD_DUMP(SZ_DMALD, "\tDMALD%c\n",
621 cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'));
622
623 return SZ_DMALD;
624}
625
626static inline u32 _emit_LDP(unsigned dry_run, u8 buf[],
627 enum pl330_cond cond, u8 peri)
628{
629 if (dry_run)
630 return SZ_DMALDP;
631
632 buf[0] = CMD_DMALDP;
633
634 if (cond == BURST)
635 buf[0] |= (1 << 1);
636
637 peri &= 0x1f;
638 peri <<= 3;
639 buf[1] = peri;
640
641 PL330_DBGCMD_DUMP(SZ_DMALDP, "\tDMALDP%c %u\n",
642 cond == SINGLE ? 'S' : 'B', peri >> 3);
643
644 return SZ_DMALDP;
645}
646
647static inline u32 _emit_LP(unsigned dry_run, u8 buf[],
648 unsigned loop, u8 cnt)
649{
650 if (dry_run)
651 return SZ_DMALP;
652
653 buf[0] = CMD_DMALP;
654
655 if (loop)
656 buf[0] |= (1 << 1);
657
658 cnt--; /* DMAC increments by 1 internally */
659 buf[1] = cnt;
660
661 PL330_DBGCMD_DUMP(SZ_DMALP, "\tDMALP_%c %u\n", loop ? '1' : '0', cnt);
662
663 return SZ_DMALP;
664}
665
666struct _arg_LPEND {
667 enum pl330_cond cond;
668 bool forever;
669 unsigned loop;
670 u8 bjump;
671};
672
673static inline u32 _emit_LPEND(unsigned dry_run, u8 buf[],
674 const struct _arg_LPEND *arg)
675{
676 enum pl330_cond cond = arg->cond;
677 bool forever = arg->forever;
678 unsigned loop = arg->loop;
679 u8 bjump = arg->bjump;
680
681 if (dry_run)
682 return SZ_DMALPEND;
683
684 buf[0] = CMD_DMALPEND;
685
686 if (loop)
687 buf[0] |= (1 << 2);
688
689 if (!forever)
690 buf[0] |= (1 << 4);
691
692 if (cond == SINGLE)
693 buf[0] |= (0 << 1) | (1 << 0);
694 else if (cond == BURST)
695 buf[0] |= (1 << 1) | (1 << 0);
696
697 buf[1] = bjump;
698
699 PL330_DBGCMD_DUMP(SZ_DMALPEND, "\tDMALP%s%c_%c bjmpto_%x\n",
700 forever ? "FE" : "END",
701 cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'),
702 loop ? '1' : '0',
703 bjump);
704
705 return SZ_DMALPEND;
706}
707
708static inline u32 _emit_KILL(unsigned dry_run, u8 buf[])
709{
710 if (dry_run)
711 return SZ_DMAKILL;
712
713 buf[0] = CMD_DMAKILL;
714
715 return SZ_DMAKILL;
716}
717
718static inline u32 _emit_MOV(unsigned dry_run, u8 buf[],
719 enum dmamov_dst dst, u32 val)
720{
721 if (dry_run)
722 return SZ_DMAMOV;
723
724 buf[0] = CMD_DMAMOV;
725 buf[1] = dst;
726 buf[2] = val;
727 buf[3] = val >> 8;
728 buf[4] = val >> 16;
729 buf[5] = val >> 24;
730
731 PL330_DBGCMD_DUMP(SZ_DMAMOV, "\tDMAMOV %s 0x%x\n",
732 dst == SAR ? "SAR" : (dst == DAR ? "DAR" : "CCR"), val);
733
734 return SZ_DMAMOV;
735}
736
737static inline u32 _emit_RMB(unsigned dry_run, u8 buf[])
738{
739 if (dry_run)
740 return SZ_DMARMB;
741
742 buf[0] = CMD_DMARMB;
743
744 PL330_DBGCMD_DUMP(SZ_DMARMB, "\tDMARMB\n");
745
746 return SZ_DMARMB;
747}
748
749static inline u32 _emit_SEV(unsigned dry_run, u8 buf[], u8 ev)
750{
751 if (dry_run)
752 return SZ_DMASEV;
753
754 buf[0] = CMD_DMASEV;
755
756 ev &= 0x1f;
757 ev <<= 3;
758 buf[1] = ev;
759
760 PL330_DBGCMD_DUMP(SZ_DMASEV, "\tDMASEV %u\n", ev >> 3);
761
762 return SZ_DMASEV;
763}
764
765static inline u32 _emit_ST(unsigned dry_run, u8 buf[], enum pl330_cond cond)
766{
767 if (dry_run)
768 return SZ_DMAST;
769
770 buf[0] = CMD_DMAST;
771
772 if (cond == SINGLE)
773 buf[0] |= (0 << 1) | (1 << 0);
774 else if (cond == BURST)
775 buf[0] |= (1 << 1) | (1 << 0);
776
777 PL330_DBGCMD_DUMP(SZ_DMAST, "\tDMAST%c\n",
778 cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'));
779
780 return SZ_DMAST;
781}
782
783static inline u32 _emit_STP(unsigned dry_run, u8 buf[],
784 enum pl330_cond cond, u8 peri)
785{
786 if (dry_run)
787 return SZ_DMASTP;
788
789 buf[0] = CMD_DMASTP;
790
791 if (cond == BURST)
792 buf[0] |= (1 << 1);
793
794 peri &= 0x1f;
795 peri <<= 3;
796 buf[1] = peri;
797
798 PL330_DBGCMD_DUMP(SZ_DMASTP, "\tDMASTP%c %u\n",
799 cond == SINGLE ? 'S' : 'B', peri >> 3);
800
801 return SZ_DMASTP;
802}
803
804static inline u32 _emit_WFP(unsigned dry_run, u8 buf[],
805 enum pl330_cond cond, u8 peri)
806{
807 if (dry_run)
808 return SZ_DMAWFP;
809
810 buf[0] = CMD_DMAWFP;
811
812 if (cond == SINGLE)
813 buf[0] |= (0 << 1) | (0 << 0);
814 else if (cond == BURST)
815 buf[0] |= (1 << 1) | (0 << 0);
816 else
817 buf[0] |= (0 << 1) | (1 << 0);
818
819 peri &= 0x1f;
820 peri <<= 3;
821 buf[1] = peri;
822
823 PL330_DBGCMD_DUMP(SZ_DMAWFP, "\tDMAWFP%c %u\n",
824 cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'P'), peri >> 3);
825
826 return SZ_DMAWFP;
827}
828
829static inline u32 _emit_WMB(unsigned dry_run, u8 buf[])
830{
831 if (dry_run)
832 return SZ_DMAWMB;
833
834 buf[0] = CMD_DMAWMB;
835
836 PL330_DBGCMD_DUMP(SZ_DMAWMB, "\tDMAWMB\n");
837
838 return SZ_DMAWMB;
839}
840
841struct _arg_GO {
842 u8 chan;
843 u32 addr;
844 unsigned ns;
845};
846
847static inline u32 _emit_GO(unsigned dry_run, u8 buf[],
848 const struct _arg_GO *arg)
849{
850 u8 chan = arg->chan;
851 u32 addr = arg->addr;
852 unsigned ns = arg->ns;
853
854 if (dry_run)
855 return SZ_DMAGO;
856
857 buf[0] = CMD_DMAGO;
858 buf[0] |= (ns << 1);
859 buf[1] = chan & 0x7;
860 buf[2] = addr;
861 buf[3] = addr >> 8;
862 buf[4] = addr >> 16;
863 buf[5] = addr >> 24;
864
865 return SZ_DMAGO;
866}
867
868#define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t)
869
870/* Returns Time-Out */
871static bool _until_dmac_idle(struct pl330_thread *thrd)
872{
873 void __iomem *regs = thrd->dmac->base;
874 unsigned long loops = msecs_to_loops(5);
875
876 do {
877 /* Until Manager is Idle */
878 if (!(readl(regs + DBGSTATUS) & DBG_BUSY))
879 break;
880
881 cpu_relax();
882 } while (--loops);
883
884 if (!loops)
885 return true;
886
887 return false;
888}
889
890static inline void _execute_DBGINSN(struct pl330_thread *thrd,
891 u8 insn[], bool as_manager)
892{
893 void __iomem *regs = thrd->dmac->base;
894 u32 val;
895
896 /* If timed out due to halted state-machine */
897 if (_until_dmac_idle(thrd)) {
898 dev_err(thrd->dmac->ddma.dev, "DMAC halted!\n");
899 return;
900 }
901
902 val = (insn[0] << 16) | (insn[1] << 24);
903 if (!as_manager) {
904 val |= (1 << 0);
905 val |= (thrd->id << 8); /* Channel Number */
906 }
907 writel(val, regs + DBGINST0);
908
909 val = le32_to_cpu(*((__le32 *)&insn[2]));
910 writel(val, regs + DBGINST1);
911
912 /* Get going */
913 writel(0, regs + DBGCMD);
914}
915
916static inline u32 _state(struct pl330_thread *thrd)
917{
918 void __iomem *regs = thrd->dmac->base;
919 u32 val;
920
921 if (is_manager(thrd))
922 val = readl(regs + DS) & 0xf;
923 else
924 val = readl(regs + CS(thrd->id)) & 0xf;
925
926 switch (val) {
927 case DS_ST_STOP:
928 return PL330_STATE_STOPPED;
929 case DS_ST_EXEC:
930 return PL330_STATE_EXECUTING;
931 case DS_ST_CMISS:
932 return PL330_STATE_CACHEMISS;
933 case DS_ST_UPDTPC:
934 return PL330_STATE_UPDTPC;
935 case DS_ST_WFE:
936 return PL330_STATE_WFE;
937 case DS_ST_FAULT:
938 return PL330_STATE_FAULTING;
939 case DS_ST_ATBRR:
940 if (is_manager(thrd))
941 return PL330_STATE_INVALID;
942 else
943 return PL330_STATE_ATBARRIER;
944 case DS_ST_QBUSY:
945 if (is_manager(thrd))
946 return PL330_STATE_INVALID;
947 else
948 return PL330_STATE_QUEUEBUSY;
949 case DS_ST_WFP:
950 if (is_manager(thrd))
951 return PL330_STATE_INVALID;
952 else
953 return PL330_STATE_WFP;
954 case DS_ST_KILL:
955 if (is_manager(thrd))
956 return PL330_STATE_INVALID;
957 else
958 return PL330_STATE_KILLING;
959 case DS_ST_CMPLT:
960 if (is_manager(thrd))
961 return PL330_STATE_INVALID;
962 else
963 return PL330_STATE_COMPLETING;
964 case DS_ST_FLTCMP:
965 if (is_manager(thrd))
966 return PL330_STATE_INVALID;
967 else
968 return PL330_STATE_FAULT_COMPLETING;
969 default:
970 return PL330_STATE_INVALID;
971 }
972}
973
974static void _stop(struct pl330_thread *thrd)
975{
976 void __iomem *regs = thrd->dmac->base;
977 u8 insn[6] = {0, 0, 0, 0, 0, 0};
978 u32 inten = readl(regs + INTEN);
979
980 if (_state(thrd) == PL330_STATE_FAULT_COMPLETING)
981 UNTIL(thrd, PL330_STATE_FAULTING | PL330_STATE_KILLING);
982
983 /* Return if nothing needs to be done */
984 if (_state(thrd) == PL330_STATE_COMPLETING
985 || _state(thrd) == PL330_STATE_KILLING
986 || _state(thrd) == PL330_STATE_STOPPED)
987 return;
988
989 _emit_KILL(0, insn);
990
991 _execute_DBGINSN(thrd, insn, is_manager(thrd));
992
993 /* clear the event */
994 if (inten & (1 << thrd->ev))
995 writel(1 << thrd->ev, regs + INTCLR);
996 /* Stop generating interrupts for SEV */
997 writel(inten & ~(1 << thrd->ev), regs + INTEN);
998}
999
1000/* Start doing req 'idx' of thread 'thrd' */
1001static bool _trigger(struct pl330_thread *thrd)
1002{
1003 void __iomem *regs = thrd->dmac->base;
1004 struct _pl330_req *req;
1005 struct dma_pl330_desc *desc;
1006 struct _arg_GO go;
1007 unsigned ns;
1008 u8 insn[6] = {0, 0, 0, 0, 0, 0};
1009 int idx;
1010
1011 /* Return if already ACTIVE */
1012 if (_state(thrd) != PL330_STATE_STOPPED)
1013 return true;
1014
1015 idx = 1 - thrd->lstenq;
1016 if (thrd->req[idx].desc != NULL) {
1017 req = &thrd->req[idx];
1018 } else {
1019 idx = thrd->lstenq;
1020 if (thrd->req[idx].desc != NULL)
1021 req = &thrd->req[idx];
1022 else
1023 req = NULL;
1024 }
1025
1026 /* Return if no request */
1027 if (!req)
1028 return true;
1029
1030 /* Return if req is running */
1031 if (idx == thrd->req_running)
1032 return true;
1033
1034 desc = req->desc;
1035
1036 ns = desc->rqcfg.nonsecure ? 1 : 0;
1037
1038 /* See 'Abort Sources' point-4 at Page 2-25 */
1039 if (_manager_ns(thrd) && !ns)
1040 dev_info(thrd->dmac->ddma.dev, "%s:%d Recipe for ABORT!\n",
1041 __func__, __LINE__);
1042
1043 go.chan = thrd->id;
1044 go.addr = req->mc_bus;
1045 go.ns = ns;
1046 _emit_GO(0, insn, &go);
1047
1048 /* Set to generate interrupts for SEV */
1049 writel(readl(regs + INTEN) | (1 << thrd->ev), regs + INTEN);
1050
1051 /* Only manager can execute GO */
1052 _execute_DBGINSN(thrd, insn, true);
1053
1054 thrd->req_running = idx;
1055
1056 if (desc->rqtype == DMA_MEM_TO_DEV || desc->rqtype == DMA_DEV_TO_MEM)
1057 UNTIL(thrd, PL330_STATE_WFP);
1058
1059 return true;
1060}
1061
1062static bool pl330_start_thread(struct pl330_thread *thrd)
1063{
1064 switch (_state(thrd)) {
1065 case PL330_STATE_FAULT_COMPLETING:
1066 UNTIL(thrd, PL330_STATE_FAULTING | PL330_STATE_KILLING);
1067
1068 if (_state(thrd) == PL330_STATE_KILLING)
1069 UNTIL(thrd, PL330_STATE_STOPPED)
1070 fallthrough;
1071
1072 case PL330_STATE_FAULTING:
1073 _stop(thrd);
1074 fallthrough;
1075
1076 case PL330_STATE_KILLING:
1077 case PL330_STATE_COMPLETING:
1078 UNTIL(thrd, PL330_STATE_STOPPED)
1079 fallthrough;
1080
1081 case PL330_STATE_STOPPED:
1082 return _trigger(thrd);
1083
1084 case PL330_STATE_WFP:
1085 case PL330_STATE_QUEUEBUSY:
1086 case PL330_STATE_ATBARRIER:
1087 case PL330_STATE_UPDTPC:
1088 case PL330_STATE_CACHEMISS:
1089 case PL330_STATE_EXECUTING:
1090 return true;
1091
1092 case PL330_STATE_WFE: /* For RESUME, nothing yet */
1093 default:
1094 return false;
1095 }
1096}
1097
1098static inline int _ldst_memtomem(unsigned dry_run, u8 buf[],
1099 const struct _xfer_spec *pxs, int cyc)
1100{
1101 int off = 0;
1102 struct pl330_config *pcfg = pxs->desc->rqcfg.pcfg;
1103
1104 /* check lock-up free version */
1105 if (get_revision(pcfg->periph_id) >= PERIPH_REV_R1P0) {
1106 while (cyc--) {
1107 off += _emit_LD(dry_run, &buf[off], ALWAYS);
1108 off += _emit_ST(dry_run, &buf[off], ALWAYS);
1109 }
1110 } else {
1111 while (cyc--) {
1112 off += _emit_LD(dry_run, &buf[off], ALWAYS);
1113 off += _emit_RMB(dry_run, &buf[off]);
1114 off += _emit_ST(dry_run, &buf[off], ALWAYS);
1115 off += _emit_WMB(dry_run, &buf[off]);
1116 }
1117 }
1118
1119 return off;
1120}
1121
1122static u32 _emit_load(unsigned int dry_run, u8 buf[],
1123 enum pl330_cond cond, enum dma_transfer_direction direction,
1124 u8 peri)
1125{
1126 int off = 0;
1127
1128 switch (direction) {
1129 case DMA_MEM_TO_MEM:
1130 case DMA_MEM_TO_DEV:
1131 off += _emit_LD(dry_run, &buf[off], cond);
1132 break;
1133
1134 case DMA_DEV_TO_MEM:
1135 if (cond == ALWAYS) {
1136 off += _emit_LDP(dry_run, &buf[off], SINGLE,
1137 peri);
1138 off += _emit_LDP(dry_run, &buf[off], BURST,
1139 peri);
1140 } else {
1141 off += _emit_LDP(dry_run, &buf[off], cond,
1142 peri);
1143 }
1144 break;
1145
1146 default:
1147 /* this code should be unreachable */
1148 WARN_ON(1);
1149 break;
1150 }
1151
1152 return off;
1153}
1154
1155static inline u32 _emit_store(unsigned int dry_run, u8 buf[],
1156 enum pl330_cond cond, enum dma_transfer_direction direction,
1157 u8 peri)
1158{
1159 int off = 0;
1160
1161 switch (direction) {
1162 case DMA_MEM_TO_MEM:
1163 case DMA_DEV_TO_MEM:
1164 off += _emit_ST(dry_run, &buf[off], cond);
1165 break;
1166
1167 case DMA_MEM_TO_DEV:
1168 if (cond == ALWAYS) {
1169 off += _emit_STP(dry_run, &buf[off], SINGLE,
1170 peri);
1171 off += _emit_STP(dry_run, &buf[off], BURST,
1172 peri);
1173 } else {
1174 off += _emit_STP(dry_run, &buf[off], cond,
1175 peri);
1176 }
1177 break;
1178
1179 default:
1180 /* this code should be unreachable */
1181 WARN_ON(1);
1182 break;
1183 }
1184
1185 return off;
1186}
1187
1188static inline int _ldst_peripheral(struct pl330_dmac *pl330,
1189 unsigned dry_run, u8 buf[],
1190 const struct _xfer_spec *pxs, int cyc,
1191 enum pl330_cond cond)
1192{
1193 int off = 0;
1194
1195 /*
1196 * do FLUSHP at beginning to clear any stale dma requests before the
1197 * first WFP.
1198 */
1199 if (!(pl330->quirks & PL330_QUIRK_BROKEN_NO_FLUSHP))
1200 off += _emit_FLUSHP(dry_run, &buf[off], pxs->desc->peri);
1201 while (cyc--) {
1202 off += _emit_WFP(dry_run, &buf[off], cond, pxs->desc->peri);
1203 off += _emit_load(dry_run, &buf[off], cond, pxs->desc->rqtype,
1204 pxs->desc->peri);
1205 off += _emit_store(dry_run, &buf[off], cond, pxs->desc->rqtype,
1206 pxs->desc->peri);
1207 }
1208
1209 return off;
1210}
1211
1212static int _bursts(struct pl330_dmac *pl330, unsigned dry_run, u8 buf[],
1213 const struct _xfer_spec *pxs, int cyc)
1214{
1215 int off = 0;
1216 enum pl330_cond cond = BRST_LEN(pxs->ccr) > 1 ? BURST : SINGLE;
1217
1218 if (pl330->quirks & PL330_QUIRK_PERIPH_BURST)
1219 cond = BURST;
1220
1221 switch (pxs->desc->rqtype) {
1222 case DMA_MEM_TO_DEV:
1223 case DMA_DEV_TO_MEM:
1224 off += _ldst_peripheral(pl330, dry_run, &buf[off], pxs, cyc,
1225 cond);
1226 break;
1227
1228 case DMA_MEM_TO_MEM:
1229 off += _ldst_memtomem(dry_run, &buf[off], pxs, cyc);
1230 break;
1231
1232 default:
1233 /* this code should be unreachable */
1234 WARN_ON(1);
1235 break;
1236 }
1237
1238 return off;
1239}
1240
1241/*
1242 * only the unaligned burst transfers have the dregs.
1243 * so, still transfer dregs with a reduced size burst
1244 * for mem-to-mem, mem-to-dev or dev-to-mem.
1245 */
1246static int _dregs(struct pl330_dmac *pl330, unsigned int dry_run, u8 buf[],
1247 const struct _xfer_spec *pxs, int transfer_length)
1248{
1249 int off = 0;
1250 int dregs_ccr;
1251
1252 if (transfer_length == 0)
1253 return off;
1254
1255 /*
1256 * dregs_len = (total bytes - BURST_TO_BYTE(bursts, ccr)) /
1257 * BRST_SIZE(ccr)
1258 * the dregs len must be smaller than burst len,
1259 * so, for higher efficiency, we can modify CCR
1260 * to use a reduced size burst len for the dregs.
1261 */
1262 dregs_ccr = pxs->ccr;
1263 dregs_ccr &= ~((0xf << CC_SRCBRSTLEN_SHFT) |
1264 (0xf << CC_DSTBRSTLEN_SHFT));
1265 dregs_ccr |= (((transfer_length - 1) & 0xf) <<
1266 CC_SRCBRSTLEN_SHFT);
1267 dregs_ccr |= (((transfer_length - 1) & 0xf) <<
1268 CC_DSTBRSTLEN_SHFT);
1269
1270 switch (pxs->desc->rqtype) {
1271 case DMA_MEM_TO_DEV:
1272 case DMA_DEV_TO_MEM:
1273 off += _emit_MOV(dry_run, &buf[off], CCR, dregs_ccr);
1274 off += _ldst_peripheral(pl330, dry_run, &buf[off], pxs, 1,
1275 BURST);
1276 break;
1277
1278 case DMA_MEM_TO_MEM:
1279 off += _emit_MOV(dry_run, &buf[off], CCR, dregs_ccr);
1280 off += _ldst_memtomem(dry_run, &buf[off], pxs, 1);
1281 break;
1282
1283 default:
1284 /* this code should be unreachable */
1285 WARN_ON(1);
1286 break;
1287 }
1288
1289 return off;
1290}
1291
1292/* Returns bytes consumed and updates bursts */
1293static inline int _loop(struct pl330_dmac *pl330, unsigned dry_run, u8 buf[],
1294 unsigned long *bursts, const struct _xfer_spec *pxs)
1295{
1296 int cyc, cycmax, szlp, szlpend, szbrst, off;
1297 unsigned lcnt0, lcnt1, ljmp0, ljmp1;
1298 struct _arg_LPEND lpend;
1299
1300 if (*bursts == 1)
1301 return _bursts(pl330, dry_run, buf, pxs, 1);
1302
1303 /* Max iterations possible in DMALP is 256 */
1304 if (*bursts >= 256*256) {
1305 lcnt1 = 256;
1306 lcnt0 = 256;
1307 cyc = *bursts / lcnt1 / lcnt0;
1308 } else if (*bursts > 256) {
1309 lcnt1 = 256;
1310 lcnt0 = *bursts / lcnt1;
1311 cyc = 1;
1312 } else {
1313 lcnt1 = *bursts;
1314 lcnt0 = 0;
1315 cyc = 1;
1316 }
1317
1318 szlp = _emit_LP(1, buf, 0, 0);
1319 szbrst = _bursts(pl330, 1, buf, pxs, 1);
1320
1321 lpend.cond = ALWAYS;
1322 lpend.forever = false;
1323 lpend.loop = 0;
1324 lpend.bjump = 0;
1325 szlpend = _emit_LPEND(1, buf, &lpend);
1326
1327 if (lcnt0) {
1328 szlp *= 2;
1329 szlpend *= 2;
1330 }
1331
1332 /*
1333 * Max bursts that we can unroll due to limit on the
1334 * size of backward jump that can be encoded in DMALPEND
1335 * which is 8-bits and hence 255
1336 */
1337 cycmax = (255 - (szlp + szlpend)) / szbrst;
1338
1339 cyc = (cycmax < cyc) ? cycmax : cyc;
1340
1341 off = 0;
1342
1343 if (lcnt0) {
1344 off += _emit_LP(dry_run, &buf[off], 0, lcnt0);
1345 ljmp0 = off;
1346 }
1347
1348 off += _emit_LP(dry_run, &buf[off], 1, lcnt1);
1349 ljmp1 = off;
1350
1351 off += _bursts(pl330, dry_run, &buf[off], pxs, cyc);
1352
1353 lpend.cond = ALWAYS;
1354 lpend.forever = false;
1355 lpend.loop = 1;
1356 lpend.bjump = off - ljmp1;
1357 off += _emit_LPEND(dry_run, &buf[off], &lpend);
1358
1359 if (lcnt0) {
1360 lpend.cond = ALWAYS;
1361 lpend.forever = false;
1362 lpend.loop = 0;
1363 lpend.bjump = off - ljmp0;
1364 off += _emit_LPEND(dry_run, &buf[off], &lpend);
1365 }
1366
1367 *bursts = lcnt1 * cyc;
1368 if (lcnt0)
1369 *bursts *= lcnt0;
1370
1371 return off;
1372}
1373
1374static inline int _setup_loops(struct pl330_dmac *pl330,
1375 unsigned dry_run, u8 buf[],
1376 const struct _xfer_spec *pxs)
1377{
1378 struct pl330_xfer *x = &pxs->desc->px;
1379 u32 ccr = pxs->ccr;
1380 unsigned long c, bursts = BYTE_TO_BURST(x->bytes, ccr);
1381 int num_dregs = (x->bytes - BURST_TO_BYTE(bursts, ccr)) /
1382 BRST_SIZE(ccr);
1383 int off = 0;
1384
1385 while (bursts) {
1386 c = bursts;
1387 off += _loop(pl330, dry_run, &buf[off], &c, pxs);
1388 bursts -= c;
1389 }
1390 off += _dregs(pl330, dry_run, &buf[off], pxs, num_dregs);
1391
1392 return off;
1393}
1394
1395static inline int _setup_xfer(struct pl330_dmac *pl330,
1396 unsigned dry_run, u8 buf[],
1397 const struct _xfer_spec *pxs)
1398{
1399 struct pl330_xfer *x = &pxs->desc->px;
1400 int off = 0;
1401
1402 /* DMAMOV SAR, x->src_addr */
1403 off += _emit_MOV(dry_run, &buf[off], SAR, x->src_addr);
1404 /* DMAMOV DAR, x->dst_addr */
1405 off += _emit_MOV(dry_run, &buf[off], DAR, x->dst_addr);
1406
1407 /* Setup Loop(s) */
1408 off += _setup_loops(pl330, dry_run, &buf[off], pxs);
1409
1410 return off;
1411}
1412
1413/*
1414 * A req is a sequence of one or more xfer units.
1415 * Returns the number of bytes taken to setup the MC for the req.
1416 */
1417static int _setup_req(struct pl330_dmac *pl330, unsigned dry_run,
1418 struct pl330_thread *thrd, unsigned index,
1419 struct _xfer_spec *pxs)
1420{
1421 struct _pl330_req *req = &thrd->req[index];
1422 u8 *buf = req->mc_cpu;
1423 int off = 0;
1424
1425 PL330_DBGMC_START(req->mc_bus);
1426
1427 /* DMAMOV CCR, ccr */
1428 off += _emit_MOV(dry_run, &buf[off], CCR, pxs->ccr);
1429
1430 off += _setup_xfer(pl330, dry_run, &buf[off], pxs);
1431
1432 /* DMASEV peripheral/event */
1433 off += _emit_SEV(dry_run, &buf[off], thrd->ev);
1434 /* DMAEND */
1435 off += _emit_END(dry_run, &buf[off]);
1436
1437 return off;
1438}
1439
1440static inline u32 _prepare_ccr(const struct pl330_reqcfg *rqc)
1441{
1442 u32 ccr = 0;
1443
1444 if (rqc->src_inc)
1445 ccr |= CC_SRCINC;
1446
1447 if (rqc->dst_inc)
1448 ccr |= CC_DSTINC;
1449
1450 /* We set same protection levels for Src and DST for now */
1451 if (rqc->privileged)
1452 ccr |= CC_SRCPRI | CC_DSTPRI;
1453 if (rqc->nonsecure)
1454 ccr |= CC_SRCNS | CC_DSTNS;
1455 if (rqc->insnaccess)
1456 ccr |= CC_SRCIA | CC_DSTIA;
1457
1458 ccr |= (((rqc->brst_len - 1) & 0xf) << CC_SRCBRSTLEN_SHFT);
1459 ccr |= (((rqc->brst_len - 1) & 0xf) << CC_DSTBRSTLEN_SHFT);
1460
1461 ccr |= (rqc->brst_size << CC_SRCBRSTSIZE_SHFT);
1462 ccr |= (rqc->brst_size << CC_DSTBRSTSIZE_SHFT);
1463
1464 ccr |= (rqc->scctl << CC_SRCCCTRL_SHFT);
1465 ccr |= (rqc->dcctl << CC_DSTCCTRL_SHFT);
1466
1467 ccr |= (rqc->swap << CC_SWAP_SHFT);
1468
1469 return ccr;
1470}
1471
1472/*
1473 * Submit a list of xfers after which the client wants notification.
1474 * Client is not notified after each xfer unit, just once after all
1475 * xfer units are done or some error occurs.
1476 */
1477static int pl330_submit_req(struct pl330_thread *thrd,
1478 struct dma_pl330_desc *desc)
1479{
1480 struct pl330_dmac *pl330 = thrd->dmac;
1481 struct _xfer_spec xs;
1482 unsigned long flags;
1483 unsigned idx;
1484 u32 ccr;
1485 int ret = 0;
1486
1487 switch (desc->rqtype) {
1488 case DMA_MEM_TO_DEV:
1489 break;
1490
1491 case DMA_DEV_TO_MEM:
1492 break;
1493
1494 case DMA_MEM_TO_MEM:
1495 break;
1496
1497 default:
1498 return -ENOTSUPP;
1499 }
1500
1501 if (pl330->state == DYING
1502 || pl330->dmac_tbd.reset_chan & (1 << thrd->id)) {
1503 dev_info(thrd->dmac->ddma.dev, "%s:%d\n",
1504 __func__, __LINE__);
1505 return -EAGAIN;
1506 }
1507
1508 /* If request for non-existing peripheral */
1509 if (desc->rqtype != DMA_MEM_TO_MEM &&
1510 desc->peri >= pl330->pcfg.num_peri) {
1511 dev_info(thrd->dmac->ddma.dev,
1512 "%s:%d Invalid peripheral(%u)!\n",
1513 __func__, __LINE__, desc->peri);
1514 return -EINVAL;
1515 }
1516
1517 spin_lock_irqsave(&pl330->lock, flags);
1518
1519 if (_queue_full(thrd)) {
1520 ret = -EAGAIN;
1521 goto xfer_exit;
1522 }
1523
1524 /* Prefer Secure Channel */
1525 if (!_manager_ns(thrd))
1526 desc->rqcfg.nonsecure = 0;
1527 else
1528 desc->rqcfg.nonsecure = 1;
1529
1530 ccr = _prepare_ccr(&desc->rqcfg);
1531
1532 idx = thrd->req[0].desc == NULL ? 0 : 1;
1533
1534 xs.ccr = ccr;
1535 xs.desc = desc;
1536
1537 /* First dry run to check if req is acceptable */
1538 ret = _setup_req(pl330, 1, thrd, idx, &xs);
1539
1540 if (ret > pl330->mcbufsz / 2) {
1541 dev_info(pl330->ddma.dev, "%s:%d Try increasing mcbufsz (%i/%i)\n",
1542 __func__, __LINE__, ret, pl330->mcbufsz / 2);
1543 ret = -ENOMEM;
1544 goto xfer_exit;
1545 }
1546
1547 /* Hook the request */
1548 thrd->lstenq = idx;
1549 thrd->req[idx].desc = desc;
1550 _setup_req(pl330, 0, thrd, idx, &xs);
1551
1552 ret = 0;
1553
1554xfer_exit:
1555 spin_unlock_irqrestore(&pl330->lock, flags);
1556
1557 return ret;
1558}
1559
1560static void dma_pl330_rqcb(struct dma_pl330_desc *desc, enum pl330_op_err err)
1561{
1562 struct dma_pl330_chan *pch;
1563 unsigned long flags;
1564
1565 if (!desc)
1566 return;
1567
1568 pch = desc->pchan;
1569
1570 /* If desc aborted */
1571 if (!pch)
1572 return;
1573
1574 spin_lock_irqsave(&pch->lock, flags);
1575
1576 desc->status = DONE;
1577
1578 spin_unlock_irqrestore(&pch->lock, flags);
1579
1580 tasklet_schedule(&pch->task);
1581}
1582
1583static void pl330_dotask(struct tasklet_struct *t)
1584{
1585 struct pl330_dmac *pl330 = from_tasklet(pl330, t, tasks);
1586 unsigned long flags;
1587 int i;
1588
1589 spin_lock_irqsave(&pl330->lock, flags);
1590
1591 /* The DMAC itself gone nuts */
1592 if (pl330->dmac_tbd.reset_dmac) {
1593 pl330->state = DYING;
1594 /* Reset the manager too */
1595 pl330->dmac_tbd.reset_mngr = true;
1596 /* Clear the reset flag */
1597 pl330->dmac_tbd.reset_dmac = false;
1598 }
1599
1600 if (pl330->dmac_tbd.reset_mngr) {
1601 _stop(pl330->manager);
1602 /* Reset all channels */
1603 pl330->dmac_tbd.reset_chan = (1 << pl330->pcfg.num_chan) - 1;
1604 /* Clear the reset flag */
1605 pl330->dmac_tbd.reset_mngr = false;
1606 }
1607
1608 for (i = 0; i < pl330->pcfg.num_chan; i++) {
1609
1610 if (pl330->dmac_tbd.reset_chan & (1 << i)) {
1611 struct pl330_thread *thrd = &pl330->channels[i];
1612 void __iomem *regs = pl330->base;
1613 enum pl330_op_err err;
1614
1615 _stop(thrd);
1616
1617 if (readl(regs + FSC) & (1 << thrd->id))
1618 err = PL330_ERR_FAIL;
1619 else
1620 err = PL330_ERR_ABORT;
1621
1622 spin_unlock_irqrestore(&pl330->lock, flags);
1623 dma_pl330_rqcb(thrd->req[1 - thrd->lstenq].desc, err);
1624 dma_pl330_rqcb(thrd->req[thrd->lstenq].desc, err);
1625 spin_lock_irqsave(&pl330->lock, flags);
1626
1627 thrd->req[0].desc = NULL;
1628 thrd->req[1].desc = NULL;
1629 thrd->req_running = -1;
1630
1631 /* Clear the reset flag */
1632 pl330->dmac_tbd.reset_chan &= ~(1 << i);
1633 }
1634 }
1635
1636 spin_unlock_irqrestore(&pl330->lock, flags);
1637
1638 return;
1639}
1640
1641/* Returns 1 if state was updated, 0 otherwise */
1642static int pl330_update(struct pl330_dmac *pl330)
1643{
1644 struct dma_pl330_desc *descdone;
1645 unsigned long flags;
1646 void __iomem *regs;
1647 u32 val;
1648 int id, ev, ret = 0;
1649
1650 regs = pl330->base;
1651
1652 spin_lock_irqsave(&pl330->lock, flags);
1653
1654 val = readl(regs + FSM) & 0x1;
1655 if (val)
1656 pl330->dmac_tbd.reset_mngr = true;
1657 else
1658 pl330->dmac_tbd.reset_mngr = false;
1659
1660 val = readl(regs + FSC) & ((1 << pl330->pcfg.num_chan) - 1);
1661 pl330->dmac_tbd.reset_chan |= val;
1662 if (val) {
1663 int i = 0;
1664 while (i < pl330->pcfg.num_chan) {
1665 if (val & (1 << i)) {
1666 dev_info(pl330->ddma.dev,
1667 "Reset Channel-%d\t CS-%x FTC-%x\n",
1668 i, readl(regs + CS(i)),
1669 readl(regs + FTC(i)));
1670 _stop(&pl330->channels[i]);
1671 }
1672 i++;
1673 }
1674 }
1675
1676 /* Check which event happened i.e, thread notified */
1677 val = readl(regs + ES);
1678 if (pl330->pcfg.num_events < 32
1679 && val & ~((1 << pl330->pcfg.num_events) - 1)) {
1680 pl330->dmac_tbd.reset_dmac = true;
1681 dev_err(pl330->ddma.dev, "%s:%d Unexpected!\n", __func__,
1682 __LINE__);
1683 ret = 1;
1684 goto updt_exit;
1685 }
1686
1687 for (ev = 0; ev < pl330->pcfg.num_events; ev++) {
1688 if (val & (1 << ev)) { /* Event occurred */
1689 struct pl330_thread *thrd;
1690 u32 inten = readl(regs + INTEN);
1691 int active;
1692
1693 /* Clear the event */
1694 if (inten & (1 << ev))
1695 writel(1 << ev, regs + INTCLR);
1696
1697 ret = 1;
1698
1699 id = pl330->events[ev];
1700
1701 thrd = &pl330->channels[id];
1702
1703 active = thrd->req_running;
1704 if (active == -1) /* Aborted */
1705 continue;
1706
1707 /* Detach the req */
1708 descdone = thrd->req[active].desc;
1709 thrd->req[active].desc = NULL;
1710
1711 thrd->req_running = -1;
1712
1713 /* Get going again ASAP */
1714 pl330_start_thread(thrd);
1715
1716 /* For now, just make a list of callbacks to be done */
1717 list_add_tail(&descdone->rqd, &pl330->req_done);
1718 }
1719 }
1720
1721 /* Now that we are in no hurry, do the callbacks */
1722 while (!list_empty(&pl330->req_done)) {
1723 descdone = list_first_entry(&pl330->req_done,
1724 struct dma_pl330_desc, rqd);
1725 list_del(&descdone->rqd);
1726 spin_unlock_irqrestore(&pl330->lock, flags);
1727 dma_pl330_rqcb(descdone, PL330_ERR_NONE);
1728 spin_lock_irqsave(&pl330->lock, flags);
1729 }
1730
1731updt_exit:
1732 spin_unlock_irqrestore(&pl330->lock, flags);
1733
1734 if (pl330->dmac_tbd.reset_dmac
1735 || pl330->dmac_tbd.reset_mngr
1736 || pl330->dmac_tbd.reset_chan) {
1737 ret = 1;
1738 tasklet_schedule(&pl330->tasks);
1739 }
1740
1741 return ret;
1742}
1743
1744/* Reserve an event */
1745static inline int _alloc_event(struct pl330_thread *thrd)
1746{
1747 struct pl330_dmac *pl330 = thrd->dmac;
1748 int ev;
1749
1750 for (ev = 0; ev < pl330->pcfg.num_events; ev++)
1751 if (pl330->events[ev] == -1) {
1752 pl330->events[ev] = thrd->id;
1753 return ev;
1754 }
1755
1756 return -1;
1757}
1758
1759static bool _chan_ns(const struct pl330_dmac *pl330, int i)
1760{
1761 return pl330->pcfg.irq_ns & (1 << i);
1762}
1763
1764/* Upon success, returns IdentityToken for the
1765 * allocated channel, NULL otherwise.
1766 */
1767static struct pl330_thread *pl330_request_channel(struct pl330_dmac *pl330)
1768{
1769 struct pl330_thread *thrd = NULL;
1770 int chans, i;
1771
1772 if (pl330->state == DYING)
1773 return NULL;
1774
1775 chans = pl330->pcfg.num_chan;
1776
1777 for (i = 0; i < chans; i++) {
1778 thrd = &pl330->channels[i];
1779 if ((thrd->free) && (!_manager_ns(thrd) ||
1780 _chan_ns(pl330, i))) {
1781 thrd->ev = _alloc_event(thrd);
1782 if (thrd->ev >= 0) {
1783 thrd->free = false;
1784 thrd->lstenq = 1;
1785 thrd->req[0].desc = NULL;
1786 thrd->req[1].desc = NULL;
1787 thrd->req_running = -1;
1788 break;
1789 }
1790 }
1791 thrd = NULL;
1792 }
1793
1794 return thrd;
1795}
1796
1797/* Release an event */
1798static inline void _free_event(struct pl330_thread *thrd, int ev)
1799{
1800 struct pl330_dmac *pl330 = thrd->dmac;
1801
1802 /* If the event is valid and was held by the thread */
1803 if (ev >= 0 && ev < pl330->pcfg.num_events
1804 && pl330->events[ev] == thrd->id)
1805 pl330->events[ev] = -1;
1806}
1807
1808static void pl330_release_channel(struct pl330_thread *thrd)
1809{
1810 if (!thrd || thrd->free)
1811 return;
1812
1813 _stop(thrd);
1814
1815 dma_pl330_rqcb(thrd->req[1 - thrd->lstenq].desc, PL330_ERR_ABORT);
1816 dma_pl330_rqcb(thrd->req[thrd->lstenq].desc, PL330_ERR_ABORT);
1817
1818 _free_event(thrd, thrd->ev);
1819 thrd->free = true;
1820}
1821
1822/* Initialize the structure for PL330 configuration, that can be used
1823 * by the client driver the make best use of the DMAC
1824 */
1825static void read_dmac_config(struct pl330_dmac *pl330)
1826{
1827 void __iomem *regs = pl330->base;
1828 u32 val;
1829
1830 val = readl(regs + CRD) >> CRD_DATA_WIDTH_SHIFT;
1831 val &= CRD_DATA_WIDTH_MASK;
1832 pl330->pcfg.data_bus_width = 8 * (1 << val);
1833
1834 val = readl(regs + CRD) >> CRD_DATA_BUFF_SHIFT;
1835 val &= CRD_DATA_BUFF_MASK;
1836 pl330->pcfg.data_buf_dep = val + 1;
1837
1838 val = readl(regs + CR0) >> CR0_NUM_CHANS_SHIFT;
1839 val &= CR0_NUM_CHANS_MASK;
1840 val += 1;
1841 pl330->pcfg.num_chan = val;
1842
1843 val = readl(regs + CR0);
1844 if (val & CR0_PERIPH_REQ_SET) {
1845 val = (val >> CR0_NUM_PERIPH_SHIFT) & CR0_NUM_PERIPH_MASK;
1846 val += 1;
1847 pl330->pcfg.num_peri = val;
1848 pl330->pcfg.peri_ns = readl(regs + CR4);
1849 } else {
1850 pl330->pcfg.num_peri = 0;
1851 }
1852
1853 val = readl(regs + CR0);
1854 if (val & CR0_BOOT_MAN_NS)
1855 pl330->pcfg.mode |= DMAC_MODE_NS;
1856 else
1857 pl330->pcfg.mode &= ~DMAC_MODE_NS;
1858
1859 val = readl(regs + CR0) >> CR0_NUM_EVENTS_SHIFT;
1860 val &= CR0_NUM_EVENTS_MASK;
1861 val += 1;
1862 pl330->pcfg.num_events = val;
1863
1864 pl330->pcfg.irq_ns = readl(regs + CR3);
1865}
1866
1867static inline void _reset_thread(struct pl330_thread *thrd)
1868{
1869 struct pl330_dmac *pl330 = thrd->dmac;
1870
1871 thrd->req[0].mc_cpu = pl330->mcode_cpu
1872 + (thrd->id * pl330->mcbufsz);
1873 thrd->req[0].mc_bus = pl330->mcode_bus
1874 + (thrd->id * pl330->mcbufsz);
1875 thrd->req[0].desc = NULL;
1876
1877 thrd->req[1].mc_cpu = thrd->req[0].mc_cpu
1878 + pl330->mcbufsz / 2;
1879 thrd->req[1].mc_bus = thrd->req[0].mc_bus
1880 + pl330->mcbufsz / 2;
1881 thrd->req[1].desc = NULL;
1882
1883 thrd->req_running = -1;
1884}
1885
1886static int dmac_alloc_threads(struct pl330_dmac *pl330)
1887{
1888 int chans = pl330->pcfg.num_chan;
1889 struct pl330_thread *thrd;
1890 int i;
1891
1892 /* Allocate 1 Manager and 'chans' Channel threads */
1893 pl330->channels = kcalloc(1 + chans, sizeof(*thrd),
1894 GFP_KERNEL);
1895 if (!pl330->channels)
1896 return -ENOMEM;
1897
1898 /* Init Channel threads */
1899 for (i = 0; i < chans; i++) {
1900 thrd = &pl330->channels[i];
1901 thrd->id = i;
1902 thrd->dmac = pl330;
1903 _reset_thread(thrd);
1904 thrd->free = true;
1905 }
1906
1907 /* MANAGER is indexed at the end */
1908 thrd = &pl330->channels[chans];
1909 thrd->id = chans;
1910 thrd->dmac = pl330;
1911 thrd->free = false;
1912 pl330->manager = thrd;
1913
1914 return 0;
1915}
1916
1917static int dmac_alloc_resources(struct pl330_dmac *pl330)
1918{
1919 int chans = pl330->pcfg.num_chan;
1920 int ret;
1921
1922 /*
1923 * Alloc MicroCode buffer for 'chans' Channel threads.
1924 * A channel's buffer offset is (Channel_Id * MCODE_BUFF_PERCHAN)
1925 */
1926 pl330->mcode_cpu = dma_alloc_attrs(pl330->ddma.dev,
1927 chans * pl330->mcbufsz,
1928 &pl330->mcode_bus, GFP_KERNEL,
1929 DMA_ATTR_PRIVILEGED);
1930 if (!pl330->mcode_cpu) {
1931 dev_err(pl330->ddma.dev, "%s:%d Can't allocate memory!\n",
1932 __func__, __LINE__);
1933 return -ENOMEM;
1934 }
1935
1936 ret = dmac_alloc_threads(pl330);
1937 if (ret) {
1938 dev_err(pl330->ddma.dev, "%s:%d Can't to create channels for DMAC!\n",
1939 __func__, __LINE__);
1940 dma_free_attrs(pl330->ddma.dev,
1941 chans * pl330->mcbufsz,
1942 pl330->mcode_cpu, pl330->mcode_bus,
1943 DMA_ATTR_PRIVILEGED);
1944 return ret;
1945 }
1946
1947 return 0;
1948}
1949
1950static int pl330_add(struct pl330_dmac *pl330)
1951{
1952 int i, ret;
1953
1954 /* Check if we can handle this DMAC */
1955 if ((pl330->pcfg.periph_id & 0xfffff) != PERIPH_ID_VAL) {
1956 dev_err(pl330->ddma.dev, "PERIPH_ID 0x%x !\n",
1957 pl330->pcfg.periph_id);
1958 return -EINVAL;
1959 }
1960
1961 /* Read the configuration of the DMAC */
1962 read_dmac_config(pl330);
1963
1964 if (pl330->pcfg.num_events == 0) {
1965 dev_err(pl330->ddma.dev, "%s:%d Can't work without events!\n",
1966 __func__, __LINE__);
1967 return -EINVAL;
1968 }
1969
1970 spin_lock_init(&pl330->lock);
1971
1972 INIT_LIST_HEAD(&pl330->req_done);
1973
1974 /* Use default MC buffer size if not provided */
1975 if (!pl330->mcbufsz)
1976 pl330->mcbufsz = MCODE_BUFF_PER_REQ * 2;
1977
1978 /* Mark all events as free */
1979 for (i = 0; i < pl330->pcfg.num_events; i++)
1980 pl330->events[i] = -1;
1981
1982 /* Allocate resources needed by the DMAC */
1983 ret = dmac_alloc_resources(pl330);
1984 if (ret) {
1985 dev_err(pl330->ddma.dev, "Unable to create channels for DMAC\n");
1986 return ret;
1987 }
1988
1989 tasklet_setup(&pl330->tasks, pl330_dotask);
1990
1991 pl330->state = INIT;
1992
1993 return 0;
1994}
1995
1996static int dmac_free_threads(struct pl330_dmac *pl330)
1997{
1998 struct pl330_thread *thrd;
1999 int i;
2000
2001 /* Release Channel threads */
2002 for (i = 0; i < pl330->pcfg.num_chan; i++) {
2003 thrd = &pl330->channels[i];
2004 pl330_release_channel(thrd);
2005 }
2006
2007 /* Free memory */
2008 kfree(pl330->channels);
2009
2010 return 0;
2011}
2012
2013static void pl330_del(struct pl330_dmac *pl330)
2014{
2015 pl330->state = UNINIT;
2016
2017 tasklet_kill(&pl330->tasks);
2018
2019 /* Free DMAC resources */
2020 dmac_free_threads(pl330);
2021
2022 dma_free_attrs(pl330->ddma.dev,
2023 pl330->pcfg.num_chan * pl330->mcbufsz, pl330->mcode_cpu,
2024 pl330->mcode_bus, DMA_ATTR_PRIVILEGED);
2025}
2026
2027/* forward declaration */
2028static struct amba_driver pl330_driver;
2029
2030static inline struct dma_pl330_chan *
2031to_pchan(struct dma_chan *ch)
2032{
2033 if (!ch)
2034 return NULL;
2035
2036 return container_of(ch, struct dma_pl330_chan, chan);
2037}
2038
2039static inline struct dma_pl330_desc *
2040to_desc(struct dma_async_tx_descriptor *tx)
2041{
2042 return container_of(tx, struct dma_pl330_desc, txd);
2043}
2044
2045static inline void fill_queue(struct dma_pl330_chan *pch)
2046{
2047 struct dma_pl330_desc *desc;
2048 int ret;
2049
2050 list_for_each_entry(desc, &pch->work_list, node) {
2051
2052 /* If already submitted */
2053 if (desc->status == BUSY || desc->status == PAUSED)
2054 continue;
2055
2056 ret = pl330_submit_req(pch->thread, desc);
2057 if (!ret) {
2058 desc->status = BUSY;
2059 } else if (ret == -EAGAIN) {
2060 /* QFull or DMAC Dying */
2061 break;
2062 } else {
2063 /* Unacceptable request */
2064 desc->status = DONE;
2065 dev_err(pch->dmac->ddma.dev, "%s:%d Bad Desc(%d)\n",
2066 __func__, __LINE__, desc->txd.cookie);
2067 tasklet_schedule(&pch->task);
2068 }
2069 }
2070}
2071
2072static void pl330_tasklet(struct tasklet_struct *t)
2073{
2074 struct dma_pl330_chan *pch = from_tasklet(pch, t, task);
2075 struct dma_pl330_desc *desc, *_dt;
2076 unsigned long flags;
2077 bool power_down = false;
2078
2079 spin_lock_irqsave(&pch->lock, flags);
2080
2081 /* Pick up ripe tomatoes */
2082 list_for_each_entry_safe(desc, _dt, &pch->work_list, node)
2083 if (desc->status == DONE) {
2084 if (!pch->cyclic)
2085 dma_cookie_complete(&desc->txd);
2086 list_move_tail(&desc->node, &pch->completed_list);
2087 }
2088
2089 /* Try to submit a req imm. next to the last completed cookie */
2090 fill_queue(pch);
2091
2092 if (list_empty(&pch->work_list)) {
2093 spin_lock(&pch->thread->dmac->lock);
2094 _stop(pch->thread);
2095 spin_unlock(&pch->thread->dmac->lock);
2096 power_down = true;
2097 pch->active = false;
2098 } else {
2099 /* Make sure the PL330 Channel thread is active */
2100 spin_lock(&pch->thread->dmac->lock);
2101 pl330_start_thread(pch->thread);
2102 spin_unlock(&pch->thread->dmac->lock);
2103 }
2104
2105 while (!list_empty(&pch->completed_list)) {
2106 struct dmaengine_desc_callback cb;
2107
2108 desc = list_first_entry(&pch->completed_list,
2109 struct dma_pl330_desc, node);
2110
2111 dmaengine_desc_get_callback(&desc->txd, &cb);
2112
2113 if (pch->cyclic) {
2114 desc->status = PREP;
2115 list_move_tail(&desc->node, &pch->work_list);
2116 if (power_down) {
2117 pch->active = true;
2118 spin_lock(&pch->thread->dmac->lock);
2119 pl330_start_thread(pch->thread);
2120 spin_unlock(&pch->thread->dmac->lock);
2121 power_down = false;
2122 }
2123 } else {
2124 desc->status = FREE;
2125 list_move_tail(&desc->node, &pch->dmac->desc_pool);
2126 }
2127
2128 dma_descriptor_unmap(&desc->txd);
2129
2130 if (dmaengine_desc_callback_valid(&cb)) {
2131 spin_unlock_irqrestore(&pch->lock, flags);
2132 dmaengine_desc_callback_invoke(&cb, NULL);
2133 spin_lock_irqsave(&pch->lock, flags);
2134 }
2135 }
2136 spin_unlock_irqrestore(&pch->lock, flags);
2137
2138 /* If work list empty, power down */
2139 if (power_down) {
2140 pm_runtime_mark_last_busy(pch->dmac->ddma.dev);
2141 pm_runtime_put_autosuspend(pch->dmac->ddma.dev);
2142 }
2143}
2144
2145static struct dma_chan *of_dma_pl330_xlate(struct of_phandle_args *dma_spec,
2146 struct of_dma *ofdma)
2147{
2148 int count = dma_spec->args_count;
2149 struct pl330_dmac *pl330 = ofdma->of_dma_data;
2150 unsigned int chan_id;
2151
2152 if (!pl330)
2153 return NULL;
2154
2155 if (count != 1)
2156 return NULL;
2157
2158 chan_id = dma_spec->args[0];
2159 if (chan_id >= pl330->num_peripherals)
2160 return NULL;
2161
2162 return dma_get_slave_channel(&pl330->peripherals[chan_id].chan);
2163}
2164
2165static int pl330_alloc_chan_resources(struct dma_chan *chan)
2166{
2167 struct dma_pl330_chan *pch = to_pchan(chan);
2168 struct pl330_dmac *pl330 = pch->dmac;
2169 unsigned long flags;
2170
2171 spin_lock_irqsave(&pl330->lock, flags);
2172
2173 dma_cookie_init(chan);
2174 pch->cyclic = false;
2175
2176 pch->thread = pl330_request_channel(pl330);
2177 if (!pch->thread) {
2178 spin_unlock_irqrestore(&pl330->lock, flags);
2179 return -ENOMEM;
2180 }
2181
2182 tasklet_setup(&pch->task, pl330_tasklet);
2183
2184 spin_unlock_irqrestore(&pl330->lock, flags);
2185
2186 return 1;
2187}
2188
2189/*
2190 * We need the data direction between the DMAC (the dma-mapping "device") and
2191 * the FIFO (the dmaengine "dev"), from the FIFO's point of view. Confusing!
2192 */
2193static enum dma_data_direction
2194pl330_dma_slave_map_dir(enum dma_transfer_direction dir)
2195{
2196 switch (dir) {
2197 case DMA_MEM_TO_DEV:
2198 return DMA_FROM_DEVICE;
2199 case DMA_DEV_TO_MEM:
2200 return DMA_TO_DEVICE;
2201 case DMA_DEV_TO_DEV:
2202 return DMA_BIDIRECTIONAL;
2203 default:
2204 return DMA_NONE;
2205 }
2206}
2207
2208static void pl330_unprep_slave_fifo(struct dma_pl330_chan *pch)
2209{
2210 if (pch->dir != DMA_NONE)
2211 dma_unmap_resource(pch->chan.device->dev, pch->fifo_dma,
2212 1 << pch->burst_sz, pch->dir, 0);
2213 pch->dir = DMA_NONE;
2214}
2215
2216
2217static bool pl330_prep_slave_fifo(struct dma_pl330_chan *pch,
2218 enum dma_transfer_direction dir)
2219{
2220 struct device *dev = pch->chan.device->dev;
2221 enum dma_data_direction dma_dir = pl330_dma_slave_map_dir(dir);
2222
2223 /* Already mapped for this config? */
2224 if (pch->dir == dma_dir)
2225 return true;
2226
2227 pl330_unprep_slave_fifo(pch);
2228 pch->fifo_dma = dma_map_resource(dev, pch->fifo_addr,
2229 1 << pch->burst_sz, dma_dir, 0);
2230 if (dma_mapping_error(dev, pch->fifo_dma))
2231 return false;
2232
2233 pch->dir = dma_dir;
2234 return true;
2235}
2236
2237static int fixup_burst_len(int max_burst_len, int quirks)
2238{
2239 if (max_burst_len > PL330_MAX_BURST)
2240 return PL330_MAX_BURST;
2241 else if (max_burst_len < 1)
2242 return 1;
2243 else
2244 return max_burst_len;
2245}
2246
2247static int pl330_config_write(struct dma_chan *chan,
2248 struct dma_slave_config *slave_config,
2249 enum dma_transfer_direction direction)
2250{
2251 struct dma_pl330_chan *pch = to_pchan(chan);
2252
2253 pl330_unprep_slave_fifo(pch);
2254 if (direction == DMA_MEM_TO_DEV) {
2255 if (slave_config->dst_addr)
2256 pch->fifo_addr = slave_config->dst_addr;
2257 if (slave_config->dst_addr_width)
2258 pch->burst_sz = __ffs(slave_config->dst_addr_width);
2259 pch->burst_len = fixup_burst_len(slave_config->dst_maxburst,
2260 pch->dmac->quirks);
2261 } else if (direction == DMA_DEV_TO_MEM) {
2262 if (slave_config->src_addr)
2263 pch->fifo_addr = slave_config->src_addr;
2264 if (slave_config->src_addr_width)
2265 pch->burst_sz = __ffs(slave_config->src_addr_width);
2266 pch->burst_len = fixup_burst_len(slave_config->src_maxburst,
2267 pch->dmac->quirks);
2268 }
2269
2270 return 0;
2271}
2272
2273static int pl330_config(struct dma_chan *chan,
2274 struct dma_slave_config *slave_config)
2275{
2276 struct dma_pl330_chan *pch = to_pchan(chan);
2277
2278 memcpy(&pch->slave_config, slave_config, sizeof(*slave_config));
2279
2280 return 0;
2281}
2282
2283static int pl330_terminate_all(struct dma_chan *chan)
2284{
2285 struct dma_pl330_chan *pch = to_pchan(chan);
2286 struct dma_pl330_desc *desc;
2287 unsigned long flags;
2288 struct pl330_dmac *pl330 = pch->dmac;
2289 bool power_down = false;
2290
2291 pm_runtime_get_sync(pl330->ddma.dev);
2292 spin_lock_irqsave(&pch->lock, flags);
2293
2294 spin_lock(&pl330->lock);
2295 _stop(pch->thread);
2296 pch->thread->req[0].desc = NULL;
2297 pch->thread->req[1].desc = NULL;
2298 pch->thread->req_running = -1;
2299 spin_unlock(&pl330->lock);
2300
2301 power_down = pch->active;
2302 pch->active = false;
2303
2304 /* Mark all desc done */
2305 list_for_each_entry(desc, &pch->submitted_list, node) {
2306 desc->status = FREE;
2307 dma_cookie_complete(&desc->txd);
2308 }
2309
2310 list_for_each_entry(desc, &pch->work_list , node) {
2311 desc->status = FREE;
2312 dma_cookie_complete(&desc->txd);
2313 }
2314
2315 list_splice_tail_init(&pch->submitted_list, &pl330->desc_pool);
2316 list_splice_tail_init(&pch->work_list, &pl330->desc_pool);
2317 list_splice_tail_init(&pch->completed_list, &pl330->desc_pool);
2318 spin_unlock_irqrestore(&pch->lock, flags);
2319 pm_runtime_mark_last_busy(pl330->ddma.dev);
2320 if (power_down)
2321 pm_runtime_put_autosuspend(pl330->ddma.dev);
2322 pm_runtime_put_autosuspend(pl330->ddma.dev);
2323
2324 return 0;
2325}
2326
2327/*
2328 * We don't support DMA_RESUME command because of hardware
2329 * limitations, so after pausing the channel we cannot restore
2330 * it to active state. We have to terminate channel and setup
2331 * DMA transfer again. This pause feature was implemented to
2332 * allow safely read residue before channel termination.
2333 */
2334static int pl330_pause(struct dma_chan *chan)
2335{
2336 struct dma_pl330_chan *pch = to_pchan(chan);
2337 struct pl330_dmac *pl330 = pch->dmac;
2338 struct dma_pl330_desc *desc;
2339 unsigned long flags;
2340
2341 pm_runtime_get_sync(pl330->ddma.dev);
2342 spin_lock_irqsave(&pch->lock, flags);
2343
2344 spin_lock(&pl330->lock);
2345 _stop(pch->thread);
2346 spin_unlock(&pl330->lock);
2347
2348 list_for_each_entry(desc, &pch->work_list, node) {
2349 if (desc->status == BUSY)
2350 desc->status = PAUSED;
2351 }
2352 spin_unlock_irqrestore(&pch->lock, flags);
2353 pm_runtime_mark_last_busy(pl330->ddma.dev);
2354 pm_runtime_put_autosuspend(pl330->ddma.dev);
2355
2356 return 0;
2357}
2358
2359static void pl330_free_chan_resources(struct dma_chan *chan)
2360{
2361 struct dma_pl330_chan *pch = to_pchan(chan);
2362 struct pl330_dmac *pl330 = pch->dmac;
2363 unsigned long flags;
2364
2365 tasklet_kill(&pch->task);
2366
2367 pm_runtime_get_sync(pch->dmac->ddma.dev);
2368 spin_lock_irqsave(&pl330->lock, flags);
2369
2370 pl330_release_channel(pch->thread);
2371 pch->thread = NULL;
2372
2373 if (pch->cyclic)
2374 list_splice_tail_init(&pch->work_list, &pch->dmac->desc_pool);
2375
2376 spin_unlock_irqrestore(&pl330->lock, flags);
2377 pm_runtime_mark_last_busy(pch->dmac->ddma.dev);
2378 pm_runtime_put_autosuspend(pch->dmac->ddma.dev);
2379 pl330_unprep_slave_fifo(pch);
2380}
2381
2382static int pl330_get_current_xferred_count(struct dma_pl330_chan *pch,
2383 struct dma_pl330_desc *desc)
2384{
2385 struct pl330_thread *thrd = pch->thread;
2386 struct pl330_dmac *pl330 = pch->dmac;
2387 void __iomem *regs = thrd->dmac->base;
2388 u32 val, addr;
2389
2390 pm_runtime_get_sync(pl330->ddma.dev);
2391 val = addr = 0;
2392 if (desc->rqcfg.src_inc) {
2393 val = readl(regs + SA(thrd->id));
2394 addr = desc->px.src_addr;
2395 } else {
2396 val = readl(regs + DA(thrd->id));
2397 addr = desc->px.dst_addr;
2398 }
2399 pm_runtime_mark_last_busy(pch->dmac->ddma.dev);
2400 pm_runtime_put_autosuspend(pl330->ddma.dev);
2401
2402 /* If DMAMOV hasn't finished yet, SAR/DAR can be zero */
2403 if (!val)
2404 return 0;
2405
2406 return val - addr;
2407}
2408
2409static enum dma_status
2410pl330_tx_status(struct dma_chan *chan, dma_cookie_t cookie,
2411 struct dma_tx_state *txstate)
2412{
2413 enum dma_status ret;
2414 unsigned long flags;
2415 struct dma_pl330_desc *desc, *running = NULL, *last_enq = NULL;
2416 struct dma_pl330_chan *pch = to_pchan(chan);
2417 unsigned int transferred, residual = 0;
2418
2419 ret = dma_cookie_status(chan, cookie, txstate);
2420
2421 if (!txstate)
2422 return ret;
2423
2424 if (ret == DMA_COMPLETE)
2425 goto out;
2426
2427 spin_lock_irqsave(&pch->lock, flags);
2428 spin_lock(&pch->thread->dmac->lock);
2429
2430 if (pch->thread->req_running != -1)
2431 running = pch->thread->req[pch->thread->req_running].desc;
2432
2433 last_enq = pch->thread->req[pch->thread->lstenq].desc;
2434
2435 /* Check in pending list */
2436 list_for_each_entry(desc, &pch->work_list, node) {
2437 if (desc->status == DONE)
2438 transferred = desc->bytes_requested;
2439 else if (running && desc == running)
2440 transferred =
2441 pl330_get_current_xferred_count(pch, desc);
2442 else if (desc->status == BUSY || desc->status == PAUSED)
2443 /*
2444 * Busy but not running means either just enqueued,
2445 * or finished and not yet marked done
2446 */
2447 if (desc == last_enq)
2448 transferred = 0;
2449 else
2450 transferred = desc->bytes_requested;
2451 else
2452 transferred = 0;
2453 residual += desc->bytes_requested - transferred;
2454 if (desc->txd.cookie == cookie) {
2455 switch (desc->status) {
2456 case DONE:
2457 ret = DMA_COMPLETE;
2458 break;
2459 case PAUSED:
2460 ret = DMA_PAUSED;
2461 break;
2462 case PREP:
2463 case BUSY:
2464 ret = DMA_IN_PROGRESS;
2465 break;
2466 default:
2467 WARN_ON(1);
2468 }
2469 break;
2470 }
2471 if (desc->last)
2472 residual = 0;
2473 }
2474 spin_unlock(&pch->thread->dmac->lock);
2475 spin_unlock_irqrestore(&pch->lock, flags);
2476
2477out:
2478 dma_set_residue(txstate, residual);
2479
2480 return ret;
2481}
2482
2483static void pl330_issue_pending(struct dma_chan *chan)
2484{
2485 struct dma_pl330_chan *pch = to_pchan(chan);
2486 unsigned long flags;
2487
2488 spin_lock_irqsave(&pch->lock, flags);
2489 if (list_empty(&pch->work_list)) {
2490 /*
2491 * Warn on nothing pending. Empty submitted_list may
2492 * break our pm_runtime usage counter as it is
2493 * updated on work_list emptiness status.
2494 */
2495 WARN_ON(list_empty(&pch->submitted_list));
2496 pch->active = true;
2497 pm_runtime_get_sync(pch->dmac->ddma.dev);
2498 }
2499 list_splice_tail_init(&pch->submitted_list, &pch->work_list);
2500 spin_unlock_irqrestore(&pch->lock, flags);
2501
2502 pl330_tasklet(&pch->task);
2503}
2504
2505/*
2506 * We returned the last one of the circular list of descriptor(s)
2507 * from prep_xxx, so the argument to submit corresponds to the last
2508 * descriptor of the list.
2509 */
2510static dma_cookie_t pl330_tx_submit(struct dma_async_tx_descriptor *tx)
2511{
2512 struct dma_pl330_desc *desc, *last = to_desc(tx);
2513 struct dma_pl330_chan *pch = to_pchan(tx->chan);
2514 dma_cookie_t cookie;
2515 unsigned long flags;
2516
2517 spin_lock_irqsave(&pch->lock, flags);
2518
2519 /* Assign cookies to all nodes */
2520 while (!list_empty(&last->node)) {
2521 desc = list_entry(last->node.next, struct dma_pl330_desc, node);
2522 if (pch->cyclic) {
2523 desc->txd.callback = last->txd.callback;
2524 desc->txd.callback_param = last->txd.callback_param;
2525 }
2526 desc->last = false;
2527
2528 dma_cookie_assign(&desc->txd);
2529
2530 list_move_tail(&desc->node, &pch->submitted_list);
2531 }
2532
2533 last->last = true;
2534 cookie = dma_cookie_assign(&last->txd);
2535 list_add_tail(&last->node, &pch->submitted_list);
2536 spin_unlock_irqrestore(&pch->lock, flags);
2537
2538 return cookie;
2539}
2540
2541static inline void _init_desc(struct dma_pl330_desc *desc)
2542{
2543 desc->rqcfg.swap = SWAP_NO;
2544 desc->rqcfg.scctl = CCTRL0;
2545 desc->rqcfg.dcctl = CCTRL0;
2546 desc->txd.tx_submit = pl330_tx_submit;
2547
2548 INIT_LIST_HEAD(&desc->node);
2549}
2550
2551/* Returns the number of descriptors added to the DMAC pool */
2552static int add_desc(struct list_head *pool, spinlock_t *lock,
2553 gfp_t flg, int count)
2554{
2555 struct dma_pl330_desc *desc;
2556 unsigned long flags;
2557 int i;
2558
2559 desc = kcalloc(count, sizeof(*desc), flg);
2560 if (!desc)
2561 return 0;
2562
2563 spin_lock_irqsave(lock, flags);
2564
2565 for (i = 0; i < count; i++) {
2566 _init_desc(&desc[i]);
2567 list_add_tail(&desc[i].node, pool);
2568 }
2569
2570 spin_unlock_irqrestore(lock, flags);
2571
2572 return count;
2573}
2574
2575static struct dma_pl330_desc *pluck_desc(struct list_head *pool,
2576 spinlock_t *lock)
2577{
2578 struct dma_pl330_desc *desc = NULL;
2579 unsigned long flags;
2580
2581 spin_lock_irqsave(lock, flags);
2582
2583 if (!list_empty(pool)) {
2584 desc = list_entry(pool->next,
2585 struct dma_pl330_desc, node);
2586
2587 list_del_init(&desc->node);
2588
2589 desc->status = PREP;
2590 desc->txd.callback = NULL;
2591 }
2592
2593 spin_unlock_irqrestore(lock, flags);
2594
2595 return desc;
2596}
2597
2598static struct dma_pl330_desc *pl330_get_desc(struct dma_pl330_chan *pch)
2599{
2600 struct pl330_dmac *pl330 = pch->dmac;
2601 u8 *peri_id = pch->chan.private;
2602 struct dma_pl330_desc *desc;
2603
2604 /* Pluck one desc from the pool of DMAC */
2605 desc = pluck_desc(&pl330->desc_pool, &pl330->pool_lock);
2606
2607 /* If the DMAC pool is empty, alloc new */
2608 if (!desc) {
2609 static DEFINE_SPINLOCK(lock);
2610 LIST_HEAD(pool);
2611
2612 if (!add_desc(&pool, &lock, GFP_ATOMIC, 1))
2613 return NULL;
2614
2615 desc = pluck_desc(&pool, &lock);
2616 WARN_ON(!desc || !list_empty(&pool));
2617 }
2618
2619 /* Initialize the descriptor */
2620 desc->pchan = pch;
2621 desc->txd.cookie = 0;
2622 async_tx_ack(&desc->txd);
2623
2624 desc->peri = peri_id ? pch->chan.chan_id : 0;
2625 desc->rqcfg.pcfg = &pch->dmac->pcfg;
2626
2627 dma_async_tx_descriptor_init(&desc->txd, &pch->chan);
2628
2629 return desc;
2630}
2631
2632static inline void fill_px(struct pl330_xfer *px,
2633 dma_addr_t dst, dma_addr_t src, size_t len)
2634{
2635 px->bytes = len;
2636 px->dst_addr = dst;
2637 px->src_addr = src;
2638}
2639
2640static struct dma_pl330_desc *
2641__pl330_prep_dma_memcpy(struct dma_pl330_chan *pch, dma_addr_t dst,
2642 dma_addr_t src, size_t len)
2643{
2644 struct dma_pl330_desc *desc = pl330_get_desc(pch);
2645
2646 if (!desc) {
2647 dev_err(pch->dmac->ddma.dev, "%s:%d Unable to fetch desc\n",
2648 __func__, __LINE__);
2649 return NULL;
2650 }
2651
2652 /*
2653 * Ideally we should lookout for reqs bigger than
2654 * those that can be programmed with 256 bytes of
2655 * MC buffer, but considering a req size is seldom
2656 * going to be word-unaligned and more than 200MB,
2657 * we take it easy.
2658 * Also, should the limit is reached we'd rather
2659 * have the platform increase MC buffer size than
2660 * complicating this API driver.
2661 */
2662 fill_px(&desc->px, dst, src, len);
2663
2664 return desc;
2665}
2666
2667/* Call after fixing burst size */
2668static inline int get_burst_len(struct dma_pl330_desc *desc, size_t len)
2669{
2670 struct dma_pl330_chan *pch = desc->pchan;
2671 struct pl330_dmac *pl330 = pch->dmac;
2672 int burst_len;
2673
2674 burst_len = pl330->pcfg.data_bus_width / 8;
2675 burst_len *= pl330->pcfg.data_buf_dep / pl330->pcfg.num_chan;
2676 burst_len >>= desc->rqcfg.brst_size;
2677
2678 /* src/dst_burst_len can't be more than 16 */
2679 if (burst_len > PL330_MAX_BURST)
2680 burst_len = PL330_MAX_BURST;
2681
2682 return burst_len;
2683}
2684
2685static struct dma_async_tx_descriptor *pl330_prep_dma_cyclic(
2686 struct dma_chan *chan, dma_addr_t dma_addr, size_t len,
2687 size_t period_len, enum dma_transfer_direction direction,
2688 unsigned long flags)
2689{
2690 struct dma_pl330_desc *desc = NULL, *first = NULL;
2691 struct dma_pl330_chan *pch = to_pchan(chan);
2692 struct pl330_dmac *pl330 = pch->dmac;
2693 unsigned int i;
2694 dma_addr_t dst;
2695 dma_addr_t src;
2696
2697 if (len % period_len != 0)
2698 return NULL;
2699
2700 if (!is_slave_direction(direction)) {
2701 dev_err(pch->dmac->ddma.dev, "%s:%d Invalid dma direction\n",
2702 __func__, __LINE__);
2703 return NULL;
2704 }
2705
2706 pl330_config_write(chan, &pch->slave_config, direction);
2707
2708 if (!pl330_prep_slave_fifo(pch, direction))
2709 return NULL;
2710
2711 for (i = 0; i < len / period_len; i++) {
2712 desc = pl330_get_desc(pch);
2713 if (!desc) {
2714 unsigned long iflags;
2715
2716 dev_err(pch->dmac->ddma.dev, "%s:%d Unable to fetch desc\n",
2717 __func__, __LINE__);
2718
2719 if (!first)
2720 return NULL;
2721
2722 spin_lock_irqsave(&pl330->pool_lock, iflags);
2723
2724 while (!list_empty(&first->node)) {
2725 desc = list_entry(first->node.next,
2726 struct dma_pl330_desc, node);
2727 list_move_tail(&desc->node, &pl330->desc_pool);
2728 }
2729
2730 list_move_tail(&first->node, &pl330->desc_pool);
2731
2732 spin_unlock_irqrestore(&pl330->pool_lock, iflags);
2733
2734 return NULL;
2735 }
2736
2737 switch (direction) {
2738 case DMA_MEM_TO_DEV:
2739 desc->rqcfg.src_inc = 1;
2740 desc->rqcfg.dst_inc = 0;
2741 src = dma_addr;
2742 dst = pch->fifo_dma;
2743 break;
2744 case DMA_DEV_TO_MEM:
2745 desc->rqcfg.src_inc = 0;
2746 desc->rqcfg.dst_inc = 1;
2747 src = pch->fifo_dma;
2748 dst = dma_addr;
2749 break;
2750 default:
2751 break;
2752 }
2753
2754 desc->rqtype = direction;
2755 desc->rqcfg.brst_size = pch->burst_sz;
2756 desc->rqcfg.brst_len = pch->burst_len;
2757 desc->bytes_requested = period_len;
2758 fill_px(&desc->px, dst, src, period_len);
2759
2760 if (!first)
2761 first = desc;
2762 else
2763 list_add_tail(&desc->node, &first->node);
2764
2765 dma_addr += period_len;
2766 }
2767
2768 if (!desc)
2769 return NULL;
2770
2771 pch->cyclic = true;
2772
2773 return &desc->txd;
2774}
2775
2776static struct dma_async_tx_descriptor *
2777pl330_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dst,
2778 dma_addr_t src, size_t len, unsigned long flags)
2779{
2780 struct dma_pl330_desc *desc;
2781 struct dma_pl330_chan *pch = to_pchan(chan);
2782 struct pl330_dmac *pl330;
2783 int burst;
2784
2785 if (unlikely(!pch || !len))
2786 return NULL;
2787
2788 pl330 = pch->dmac;
2789
2790 desc = __pl330_prep_dma_memcpy(pch, dst, src, len);
2791 if (!desc)
2792 return NULL;
2793
2794 desc->rqcfg.src_inc = 1;
2795 desc->rqcfg.dst_inc = 1;
2796 desc->rqtype = DMA_MEM_TO_MEM;
2797
2798 /* Select max possible burst size */
2799 burst = pl330->pcfg.data_bus_width / 8;
2800
2801 /*
2802 * Make sure we use a burst size that aligns with all the memcpy
2803 * parameters because our DMA programming algorithm doesn't cope with
2804 * transfers which straddle an entry in the DMA device's MFIFO.
2805 */
2806 while ((src | dst | len) & (burst - 1))
2807 burst /= 2;
2808
2809 desc->rqcfg.brst_size = 0;
2810 while (burst != (1 << desc->rqcfg.brst_size))
2811 desc->rqcfg.brst_size++;
2812
2813 desc->rqcfg.brst_len = get_burst_len(desc, len);
2814 /*
2815 * If burst size is smaller than bus width then make sure we only
2816 * transfer one at a time to avoid a burst stradling an MFIFO entry.
2817 */
2818 if (burst * 8 < pl330->pcfg.data_bus_width)
2819 desc->rqcfg.brst_len = 1;
2820
2821 desc->bytes_requested = len;
2822
2823 return &desc->txd;
2824}
2825
2826static void __pl330_giveback_desc(struct pl330_dmac *pl330,
2827 struct dma_pl330_desc *first)
2828{
2829 unsigned long flags;
2830 struct dma_pl330_desc *desc;
2831
2832 if (!first)
2833 return;
2834
2835 spin_lock_irqsave(&pl330->pool_lock, flags);
2836
2837 while (!list_empty(&first->node)) {
2838 desc = list_entry(first->node.next,
2839 struct dma_pl330_desc, node);
2840 list_move_tail(&desc->node, &pl330->desc_pool);
2841 }
2842
2843 list_move_tail(&first->node, &pl330->desc_pool);
2844
2845 spin_unlock_irqrestore(&pl330->pool_lock, flags);
2846}
2847
2848static struct dma_async_tx_descriptor *
2849pl330_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
2850 unsigned int sg_len, enum dma_transfer_direction direction,
2851 unsigned long flg, void *context)
2852{
2853 struct dma_pl330_desc *first, *desc = NULL;
2854 struct dma_pl330_chan *pch = to_pchan(chan);
2855 struct scatterlist *sg;
2856 int i;
2857
2858 if (unlikely(!pch || !sgl || !sg_len))
2859 return NULL;
2860
2861 pl330_config_write(chan, &pch->slave_config, direction);
2862
2863 if (!pl330_prep_slave_fifo(pch, direction))
2864 return NULL;
2865
2866 first = NULL;
2867
2868 for_each_sg(sgl, sg, sg_len, i) {
2869
2870 desc = pl330_get_desc(pch);
2871 if (!desc) {
2872 struct pl330_dmac *pl330 = pch->dmac;
2873
2874 dev_err(pch->dmac->ddma.dev,
2875 "%s:%d Unable to fetch desc\n",
2876 __func__, __LINE__);
2877 __pl330_giveback_desc(pl330, first);
2878
2879 return NULL;
2880 }
2881
2882 if (!first)
2883 first = desc;
2884 else
2885 list_add_tail(&desc->node, &first->node);
2886
2887 if (direction == DMA_MEM_TO_DEV) {
2888 desc->rqcfg.src_inc = 1;
2889 desc->rqcfg.dst_inc = 0;
2890 fill_px(&desc->px, pch->fifo_dma, sg_dma_address(sg),
2891 sg_dma_len(sg));
2892 } else {
2893 desc->rqcfg.src_inc = 0;
2894 desc->rqcfg.dst_inc = 1;
2895 fill_px(&desc->px, sg_dma_address(sg), pch->fifo_dma,
2896 sg_dma_len(sg));
2897 }
2898
2899 desc->rqcfg.brst_size = pch->burst_sz;
2900 desc->rqcfg.brst_len = pch->burst_len;
2901 desc->rqtype = direction;
2902 desc->bytes_requested = sg_dma_len(sg);
2903 }
2904
2905 /* Return the last desc in the chain */
2906 return &desc->txd;
2907}
2908
2909static irqreturn_t pl330_irq_handler(int irq, void *data)
2910{
2911 if (pl330_update(data))
2912 return IRQ_HANDLED;
2913 else
2914 return IRQ_NONE;
2915}
2916
2917#define PL330_DMA_BUSWIDTHS \
2918 BIT(DMA_SLAVE_BUSWIDTH_UNDEFINED) | \
2919 BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) | \
2920 BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) | \
2921 BIT(DMA_SLAVE_BUSWIDTH_4_BYTES) | \
2922 BIT(DMA_SLAVE_BUSWIDTH_8_BYTES)
2923
2924#ifdef CONFIG_DEBUG_FS
2925static int pl330_debugfs_show(struct seq_file *s, void *data)
2926{
2927 struct pl330_dmac *pl330 = s->private;
2928 int chans, pchs, ch, pr;
2929
2930 chans = pl330->pcfg.num_chan;
2931 pchs = pl330->num_peripherals;
2932
2933 seq_puts(s, "PL330 physical channels:\n");
2934 seq_puts(s, "THREAD:\t\tCHANNEL:\n");
2935 seq_puts(s, "--------\t-----\n");
2936 for (ch = 0; ch < chans; ch++) {
2937 struct pl330_thread *thrd = &pl330->channels[ch];
2938 int found = -1;
2939
2940 for (pr = 0; pr < pchs; pr++) {
2941 struct dma_pl330_chan *pch = &pl330->peripherals[pr];
2942
2943 if (!pch->thread || thrd->id != pch->thread->id)
2944 continue;
2945
2946 found = pr;
2947 }
2948
2949 seq_printf(s, "%d\t\t", thrd->id);
2950 if (found == -1)
2951 seq_puts(s, "--\n");
2952 else
2953 seq_printf(s, "%d\n", found);
2954 }
2955
2956 return 0;
2957}
2958
2959DEFINE_SHOW_ATTRIBUTE(pl330_debugfs);
2960
2961static inline void init_pl330_debugfs(struct pl330_dmac *pl330)
2962{
2963 debugfs_create_file(dev_name(pl330->ddma.dev),
2964 S_IFREG | 0444, NULL, pl330,
2965 &pl330_debugfs_fops);
2966}
2967#else
2968static inline void init_pl330_debugfs(struct pl330_dmac *pl330)
2969{
2970}
2971#endif
2972
2973/*
2974 * Runtime PM callbacks are provided by amba/bus.c driver.
2975 *
2976 * It is assumed here that IRQ safe runtime PM is chosen in probe and amba
2977 * bus driver will only disable/enable the clock in runtime PM callbacks.
2978 */
2979static int __maybe_unused pl330_suspend(struct device *dev)
2980{
2981 struct amba_device *pcdev = to_amba_device(dev);
2982
2983 pm_runtime_force_suspend(dev);
2984 clk_unprepare(pcdev->pclk);
2985
2986 return 0;
2987}
2988
2989static int __maybe_unused pl330_resume(struct device *dev)
2990{
2991 struct amba_device *pcdev = to_amba_device(dev);
2992 int ret;
2993
2994 ret = clk_prepare(pcdev->pclk);
2995 if (ret)
2996 return ret;
2997
2998 pm_runtime_force_resume(dev);
2999
3000 return ret;
3001}
3002
3003static const struct dev_pm_ops pl330_pm = {
3004 SET_LATE_SYSTEM_SLEEP_PM_OPS(pl330_suspend, pl330_resume)
3005};
3006
3007static int
3008pl330_probe(struct amba_device *adev, const struct amba_id *id)
3009{
3010 struct pl330_config *pcfg;
3011 struct pl330_dmac *pl330;
3012 struct dma_pl330_chan *pch, *_p;
3013 struct dma_device *pd;
3014 struct resource *res;
3015 int i, ret, irq;
3016 int num_chan;
3017 struct device_node *np = adev->dev.of_node;
3018
3019 ret = dma_set_mask_and_coherent(&adev->dev, DMA_BIT_MASK(32));
3020 if (ret)
3021 return ret;
3022
3023 /* Allocate a new DMAC and its Channels */
3024 pl330 = devm_kzalloc(&adev->dev, sizeof(*pl330), GFP_KERNEL);
3025 if (!pl330)
3026 return -ENOMEM;
3027
3028 pd = &pl330->ddma;
3029 pd->dev = &adev->dev;
3030
3031 pl330->mcbufsz = 0;
3032
3033 /* get quirk */
3034 for (i = 0; i < ARRAY_SIZE(of_quirks); i++)
3035 if (of_property_read_bool(np, of_quirks[i].quirk))
3036 pl330->quirks |= of_quirks[i].id;
3037
3038 res = &adev->res;
3039 pl330->base = devm_ioremap_resource(&adev->dev, res);
3040 if (IS_ERR(pl330->base))
3041 return PTR_ERR(pl330->base);
3042
3043 amba_set_drvdata(adev, pl330);
3044
3045 pl330->rstc = devm_reset_control_get_optional(&adev->dev, "dma");
3046 if (IS_ERR(pl330->rstc)) {
3047 return dev_err_probe(&adev->dev, PTR_ERR(pl330->rstc), "Failed to get reset!\n");
3048 } else {
3049 ret = reset_control_deassert(pl330->rstc);
3050 if (ret) {
3051 dev_err(&adev->dev, "Couldn't deassert the device from reset!\n");
3052 return ret;
3053 }
3054 }
3055
3056 pl330->rstc_ocp = devm_reset_control_get_optional(&adev->dev, "dma-ocp");
3057 if (IS_ERR(pl330->rstc_ocp)) {
3058 return dev_err_probe(&adev->dev, PTR_ERR(pl330->rstc_ocp),
3059 "Failed to get OCP reset!\n");
3060 } else {
3061 ret = reset_control_deassert(pl330->rstc_ocp);
3062 if (ret) {
3063 dev_err(&adev->dev, "Couldn't deassert the device from OCP reset!\n");
3064 return ret;
3065 }
3066 }
3067
3068 for (i = 0; i < AMBA_NR_IRQS; i++) {
3069 irq = adev->irq[i];
3070 if (irq) {
3071 ret = devm_request_irq(&adev->dev, irq,
3072 pl330_irq_handler, 0,
3073 dev_name(&adev->dev), pl330);
3074 if (ret)
3075 return ret;
3076 } else {
3077 break;
3078 }
3079 }
3080
3081 pcfg = &pl330->pcfg;
3082
3083 pcfg->periph_id = adev->periphid;
3084 ret = pl330_add(pl330);
3085 if (ret)
3086 return ret;
3087
3088 INIT_LIST_HEAD(&pl330->desc_pool);
3089 spin_lock_init(&pl330->pool_lock);
3090
3091 /* Create a descriptor pool of default size */
3092 if (!add_desc(&pl330->desc_pool, &pl330->pool_lock,
3093 GFP_KERNEL, NR_DEFAULT_DESC))
3094 dev_warn(&adev->dev, "unable to allocate desc\n");
3095
3096 INIT_LIST_HEAD(&pd->channels);
3097
3098 /* Initialize channel parameters */
3099 num_chan = max_t(int, pcfg->num_peri, pcfg->num_chan);
3100
3101 pl330->num_peripherals = num_chan;
3102
3103 pl330->peripherals = kcalloc(num_chan, sizeof(*pch), GFP_KERNEL);
3104 if (!pl330->peripherals) {
3105 ret = -ENOMEM;
3106 goto probe_err2;
3107 }
3108
3109 for (i = 0; i < num_chan; i++) {
3110 pch = &pl330->peripherals[i];
3111
3112 pch->chan.private = adev->dev.of_node;
3113 INIT_LIST_HEAD(&pch->submitted_list);
3114 INIT_LIST_HEAD(&pch->work_list);
3115 INIT_LIST_HEAD(&pch->completed_list);
3116 spin_lock_init(&pch->lock);
3117 pch->thread = NULL;
3118 pch->chan.device = pd;
3119 pch->dmac = pl330;
3120 pch->dir = DMA_NONE;
3121
3122 /* Add the channel to the DMAC list */
3123 list_add_tail(&pch->chan.device_node, &pd->channels);
3124 }
3125
3126 dma_cap_set(DMA_MEMCPY, pd->cap_mask);
3127 if (pcfg->num_peri) {
3128 dma_cap_set(DMA_SLAVE, pd->cap_mask);
3129 dma_cap_set(DMA_CYCLIC, pd->cap_mask);
3130 dma_cap_set(DMA_PRIVATE, pd->cap_mask);
3131 }
3132
3133 pd->device_alloc_chan_resources = pl330_alloc_chan_resources;
3134 pd->device_free_chan_resources = pl330_free_chan_resources;
3135 pd->device_prep_dma_memcpy = pl330_prep_dma_memcpy;
3136 pd->device_prep_dma_cyclic = pl330_prep_dma_cyclic;
3137 pd->device_tx_status = pl330_tx_status;
3138 pd->device_prep_slave_sg = pl330_prep_slave_sg;
3139 pd->device_config = pl330_config;
3140 pd->device_pause = pl330_pause;
3141 pd->device_terminate_all = pl330_terminate_all;
3142 pd->device_issue_pending = pl330_issue_pending;
3143 pd->src_addr_widths = PL330_DMA_BUSWIDTHS;
3144 pd->dst_addr_widths = PL330_DMA_BUSWIDTHS;
3145 pd->directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
3146 pd->residue_granularity = DMA_RESIDUE_GRANULARITY_BURST;
3147 pd->max_burst = PL330_MAX_BURST;
3148
3149 ret = dma_async_device_register(pd);
3150 if (ret) {
3151 dev_err(&adev->dev, "unable to register DMAC\n");
3152 goto probe_err3;
3153 }
3154
3155 if (adev->dev.of_node) {
3156 ret = of_dma_controller_register(adev->dev.of_node,
3157 of_dma_pl330_xlate, pl330);
3158 if (ret) {
3159 dev_err(&adev->dev,
3160 "unable to register DMA to the generic DT DMA helpers\n");
3161 }
3162 }
3163
3164 /*
3165 * This is the limit for transfers with a buswidth of 1, larger
3166 * buswidths will have larger limits.
3167 */
3168 ret = dma_set_max_seg_size(&adev->dev, 1900800);
3169 if (ret)
3170 dev_err(&adev->dev, "unable to set the seg size\n");
3171
3172
3173 init_pl330_debugfs(pl330);
3174 dev_info(&adev->dev,
3175 "Loaded driver for PL330 DMAC-%x\n", adev->periphid);
3176 dev_info(&adev->dev,
3177 "\tDBUFF-%ux%ubytes Num_Chans-%u Num_Peri-%u Num_Events-%u\n",
3178 pcfg->data_buf_dep, pcfg->data_bus_width / 8, pcfg->num_chan,
3179 pcfg->num_peri, pcfg->num_events);
3180
3181 pm_runtime_irq_safe(&adev->dev);
3182 pm_runtime_use_autosuspend(&adev->dev);
3183 pm_runtime_set_autosuspend_delay(&adev->dev, PL330_AUTOSUSPEND_DELAY);
3184 pm_runtime_mark_last_busy(&adev->dev);
3185 pm_runtime_put_autosuspend(&adev->dev);
3186
3187 return 0;
3188probe_err3:
3189 /* Idle the DMAC */
3190 list_for_each_entry_safe(pch, _p, &pl330->ddma.channels,
3191 chan.device_node) {
3192
3193 /* Remove the channel */
3194 list_del(&pch->chan.device_node);
3195
3196 /* Flush the channel */
3197 if (pch->thread) {
3198 pl330_terminate_all(&pch->chan);
3199 pl330_free_chan_resources(&pch->chan);
3200 }
3201 }
3202probe_err2:
3203 pl330_del(pl330);
3204
3205 if (pl330->rstc_ocp)
3206 reset_control_assert(pl330->rstc_ocp);
3207
3208 if (pl330->rstc)
3209 reset_control_assert(pl330->rstc);
3210 return ret;
3211}
3212
3213static void pl330_remove(struct amba_device *adev)
3214{
3215 struct pl330_dmac *pl330 = amba_get_drvdata(adev);
3216 struct dma_pl330_chan *pch, *_p;
3217 int i, irq;
3218
3219 pm_runtime_get_noresume(pl330->ddma.dev);
3220
3221 if (adev->dev.of_node)
3222 of_dma_controller_free(adev->dev.of_node);
3223
3224 for (i = 0; i < AMBA_NR_IRQS; i++) {
3225 irq = adev->irq[i];
3226 if (irq)
3227 devm_free_irq(&adev->dev, irq, pl330);
3228 }
3229
3230 dma_async_device_unregister(&pl330->ddma);
3231
3232 /* Idle the DMAC */
3233 list_for_each_entry_safe(pch, _p, &pl330->ddma.channels,
3234 chan.device_node) {
3235
3236 /* Remove the channel */
3237 list_del(&pch->chan.device_node);
3238
3239 /* Flush the channel */
3240 if (pch->thread) {
3241 pl330_terminate_all(&pch->chan);
3242 pl330_free_chan_resources(&pch->chan);
3243 }
3244 }
3245
3246 pl330_del(pl330);
3247
3248 if (pl330->rstc_ocp)
3249 reset_control_assert(pl330->rstc_ocp);
3250
3251 if (pl330->rstc)
3252 reset_control_assert(pl330->rstc);
3253}
3254
3255static const struct amba_id pl330_ids[] = {
3256 {
3257 .id = 0x00041330,
3258 .mask = 0x000fffff,
3259 },
3260 { 0, 0 },
3261};
3262
3263MODULE_DEVICE_TABLE(amba, pl330_ids);
3264
3265static struct amba_driver pl330_driver = {
3266 .drv = {
3267 .owner = THIS_MODULE,
3268 .name = "dma-pl330",
3269 .pm = &pl330_pm,
3270 },
3271 .id_table = pl330_ids,
3272 .probe = pl330_probe,
3273 .remove = pl330_remove,
3274};
3275
3276module_amba_driver(pl330_driver);
3277
3278MODULE_AUTHOR("Jaswinder Singh <jassisinghbrar@gmail.com>");
3279MODULE_DESCRIPTION("API Driver for PL330 DMAC");
3280MODULE_LICENSE("GPL");
1/*
2 * Copyright (c) 2012 Samsung Electronics Co., Ltd.
3 * http://www.samsung.com
4 *
5 * Copyright (C) 2010 Samsung Electronics Co. Ltd.
6 * Jaswinder Singh <jassi.brar@samsung.com>
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
12 */
13
14#include <linux/kernel.h>
15#include <linux/io.h>
16#include <linux/init.h>
17#include <linux/slab.h>
18#include <linux/module.h>
19#include <linux/string.h>
20#include <linux/delay.h>
21#include <linux/interrupt.h>
22#include <linux/dma-mapping.h>
23#include <linux/dmaengine.h>
24#include <linux/amba/bus.h>
25#include <linux/amba/pl330.h>
26#include <linux/scatterlist.h>
27#include <linux/of.h>
28#include <linux/of_dma.h>
29#include <linux/err.h>
30#include <linux/pm_runtime.h>
31
32#include "dmaengine.h"
33#define PL330_MAX_CHAN 8
34#define PL330_MAX_IRQS 32
35#define PL330_MAX_PERI 32
36#define PL330_MAX_BURST 16
37
38#define PL330_QUIRK_BROKEN_NO_FLUSHP BIT(0)
39
40enum pl330_cachectrl {
41 CCTRL0, /* Noncacheable and nonbufferable */
42 CCTRL1, /* Bufferable only */
43 CCTRL2, /* Cacheable, but do not allocate */
44 CCTRL3, /* Cacheable and bufferable, but do not allocate */
45 INVALID1, /* AWCACHE = 0x1000 */
46 INVALID2,
47 CCTRL6, /* Cacheable write-through, allocate on writes only */
48 CCTRL7, /* Cacheable write-back, allocate on writes only */
49};
50
51enum pl330_byteswap {
52 SWAP_NO,
53 SWAP_2,
54 SWAP_4,
55 SWAP_8,
56 SWAP_16,
57};
58
59/* Register and Bit field Definitions */
60#define DS 0x0
61#define DS_ST_STOP 0x0
62#define DS_ST_EXEC 0x1
63#define DS_ST_CMISS 0x2
64#define DS_ST_UPDTPC 0x3
65#define DS_ST_WFE 0x4
66#define DS_ST_ATBRR 0x5
67#define DS_ST_QBUSY 0x6
68#define DS_ST_WFP 0x7
69#define DS_ST_KILL 0x8
70#define DS_ST_CMPLT 0x9
71#define DS_ST_FLTCMP 0xe
72#define DS_ST_FAULT 0xf
73
74#define DPC 0x4
75#define INTEN 0x20
76#define ES 0x24
77#define INTSTATUS 0x28
78#define INTCLR 0x2c
79#define FSM 0x30
80#define FSC 0x34
81#define FTM 0x38
82
83#define _FTC 0x40
84#define FTC(n) (_FTC + (n)*0x4)
85
86#define _CS 0x100
87#define CS(n) (_CS + (n)*0x8)
88#define CS_CNS (1 << 21)
89
90#define _CPC 0x104
91#define CPC(n) (_CPC + (n)*0x8)
92
93#define _SA 0x400
94#define SA(n) (_SA + (n)*0x20)
95
96#define _DA 0x404
97#define DA(n) (_DA + (n)*0x20)
98
99#define _CC 0x408
100#define CC(n) (_CC + (n)*0x20)
101
102#define CC_SRCINC (1 << 0)
103#define CC_DSTINC (1 << 14)
104#define CC_SRCPRI (1 << 8)
105#define CC_DSTPRI (1 << 22)
106#define CC_SRCNS (1 << 9)
107#define CC_DSTNS (1 << 23)
108#define CC_SRCIA (1 << 10)
109#define CC_DSTIA (1 << 24)
110#define CC_SRCBRSTLEN_SHFT 4
111#define CC_DSTBRSTLEN_SHFT 18
112#define CC_SRCBRSTSIZE_SHFT 1
113#define CC_DSTBRSTSIZE_SHFT 15
114#define CC_SRCCCTRL_SHFT 11
115#define CC_SRCCCTRL_MASK 0x7
116#define CC_DSTCCTRL_SHFT 25
117#define CC_DRCCCTRL_MASK 0x7
118#define CC_SWAP_SHFT 28
119
120#define _LC0 0x40c
121#define LC0(n) (_LC0 + (n)*0x20)
122
123#define _LC1 0x410
124#define LC1(n) (_LC1 + (n)*0x20)
125
126#define DBGSTATUS 0xd00
127#define DBG_BUSY (1 << 0)
128
129#define DBGCMD 0xd04
130#define DBGINST0 0xd08
131#define DBGINST1 0xd0c
132
133#define CR0 0xe00
134#define CR1 0xe04
135#define CR2 0xe08
136#define CR3 0xe0c
137#define CR4 0xe10
138#define CRD 0xe14
139
140#define PERIPH_ID 0xfe0
141#define PERIPH_REV_SHIFT 20
142#define PERIPH_REV_MASK 0xf
143#define PERIPH_REV_R0P0 0
144#define PERIPH_REV_R1P0 1
145#define PERIPH_REV_R1P1 2
146
147#define CR0_PERIPH_REQ_SET (1 << 0)
148#define CR0_BOOT_EN_SET (1 << 1)
149#define CR0_BOOT_MAN_NS (1 << 2)
150#define CR0_NUM_CHANS_SHIFT 4
151#define CR0_NUM_CHANS_MASK 0x7
152#define CR0_NUM_PERIPH_SHIFT 12
153#define CR0_NUM_PERIPH_MASK 0x1f
154#define CR0_NUM_EVENTS_SHIFT 17
155#define CR0_NUM_EVENTS_MASK 0x1f
156
157#define CR1_ICACHE_LEN_SHIFT 0
158#define CR1_ICACHE_LEN_MASK 0x7
159#define CR1_NUM_ICACHELINES_SHIFT 4
160#define CR1_NUM_ICACHELINES_MASK 0xf
161
162#define CRD_DATA_WIDTH_SHIFT 0
163#define CRD_DATA_WIDTH_MASK 0x7
164#define CRD_WR_CAP_SHIFT 4
165#define CRD_WR_CAP_MASK 0x7
166#define CRD_WR_Q_DEP_SHIFT 8
167#define CRD_WR_Q_DEP_MASK 0xf
168#define CRD_RD_CAP_SHIFT 12
169#define CRD_RD_CAP_MASK 0x7
170#define CRD_RD_Q_DEP_SHIFT 16
171#define CRD_RD_Q_DEP_MASK 0xf
172#define CRD_DATA_BUFF_SHIFT 20
173#define CRD_DATA_BUFF_MASK 0x3ff
174
175#define PART 0x330
176#define DESIGNER 0x41
177#define REVISION 0x0
178#define INTEG_CFG 0x0
179#define PERIPH_ID_VAL ((PART << 0) | (DESIGNER << 12))
180
181#define PL330_STATE_STOPPED (1 << 0)
182#define PL330_STATE_EXECUTING (1 << 1)
183#define PL330_STATE_WFE (1 << 2)
184#define PL330_STATE_FAULTING (1 << 3)
185#define PL330_STATE_COMPLETING (1 << 4)
186#define PL330_STATE_WFP (1 << 5)
187#define PL330_STATE_KILLING (1 << 6)
188#define PL330_STATE_FAULT_COMPLETING (1 << 7)
189#define PL330_STATE_CACHEMISS (1 << 8)
190#define PL330_STATE_UPDTPC (1 << 9)
191#define PL330_STATE_ATBARRIER (1 << 10)
192#define PL330_STATE_QUEUEBUSY (1 << 11)
193#define PL330_STATE_INVALID (1 << 15)
194
195#define PL330_STABLE_STATES (PL330_STATE_STOPPED | PL330_STATE_EXECUTING \
196 | PL330_STATE_WFE | PL330_STATE_FAULTING)
197
198#define CMD_DMAADDH 0x54
199#define CMD_DMAEND 0x00
200#define CMD_DMAFLUSHP 0x35
201#define CMD_DMAGO 0xa0
202#define CMD_DMALD 0x04
203#define CMD_DMALDP 0x25
204#define CMD_DMALP 0x20
205#define CMD_DMALPEND 0x28
206#define CMD_DMAKILL 0x01
207#define CMD_DMAMOV 0xbc
208#define CMD_DMANOP 0x18
209#define CMD_DMARMB 0x12
210#define CMD_DMASEV 0x34
211#define CMD_DMAST 0x08
212#define CMD_DMASTP 0x29
213#define CMD_DMASTZ 0x0c
214#define CMD_DMAWFE 0x36
215#define CMD_DMAWFP 0x30
216#define CMD_DMAWMB 0x13
217
218#define SZ_DMAADDH 3
219#define SZ_DMAEND 1
220#define SZ_DMAFLUSHP 2
221#define SZ_DMALD 1
222#define SZ_DMALDP 2
223#define SZ_DMALP 2
224#define SZ_DMALPEND 2
225#define SZ_DMAKILL 1
226#define SZ_DMAMOV 6
227#define SZ_DMANOP 1
228#define SZ_DMARMB 1
229#define SZ_DMASEV 2
230#define SZ_DMAST 1
231#define SZ_DMASTP 2
232#define SZ_DMASTZ 1
233#define SZ_DMAWFE 2
234#define SZ_DMAWFP 2
235#define SZ_DMAWMB 1
236#define SZ_DMAGO 6
237
238#define BRST_LEN(ccr) ((((ccr) >> CC_SRCBRSTLEN_SHFT) & 0xf) + 1)
239#define BRST_SIZE(ccr) (1 << (((ccr) >> CC_SRCBRSTSIZE_SHFT) & 0x7))
240
241#define BYTE_TO_BURST(b, ccr) ((b) / BRST_SIZE(ccr) / BRST_LEN(ccr))
242#define BURST_TO_BYTE(c, ccr) ((c) * BRST_SIZE(ccr) * BRST_LEN(ccr))
243
244/*
245 * With 256 bytes, we can do more than 2.5MB and 5MB xfers per req
246 * at 1byte/burst for P<->M and M<->M respectively.
247 * For typical scenario, at 1word/burst, 10MB and 20MB xfers per req
248 * should be enough for P<->M and M<->M respectively.
249 */
250#define MCODE_BUFF_PER_REQ 256
251
252/* Use this _only_ to wait on transient states */
253#define UNTIL(t, s) while (!(_state(t) & (s))) cpu_relax();
254
255#ifdef PL330_DEBUG_MCGEN
256static unsigned cmd_line;
257#define PL330_DBGCMD_DUMP(off, x...) do { \
258 printk("%x:", cmd_line); \
259 printk(x); \
260 cmd_line += off; \
261 } while (0)
262#define PL330_DBGMC_START(addr) (cmd_line = addr)
263#else
264#define PL330_DBGCMD_DUMP(off, x...) do {} while (0)
265#define PL330_DBGMC_START(addr) do {} while (0)
266#endif
267
268/* The number of default descriptors */
269
270#define NR_DEFAULT_DESC 16
271
272/* Delay for runtime PM autosuspend, ms */
273#define PL330_AUTOSUSPEND_DELAY 20
274
275/* Populated by the PL330 core driver for DMA API driver's info */
276struct pl330_config {
277 u32 periph_id;
278#define DMAC_MODE_NS (1 << 0)
279 unsigned int mode;
280 unsigned int data_bus_width:10; /* In number of bits */
281 unsigned int data_buf_dep:11;
282 unsigned int num_chan:4;
283 unsigned int num_peri:6;
284 u32 peri_ns;
285 unsigned int num_events:6;
286 u32 irq_ns;
287};
288
289/**
290 * Request Configuration.
291 * The PL330 core does not modify this and uses the last
292 * working configuration if the request doesn't provide any.
293 *
294 * The Client may want to provide this info only for the
295 * first request and a request with new settings.
296 */
297struct pl330_reqcfg {
298 /* Address Incrementing */
299 unsigned dst_inc:1;
300 unsigned src_inc:1;
301
302 /*
303 * For now, the SRC & DST protection levels
304 * and burst size/length are assumed same.
305 */
306 bool nonsecure;
307 bool privileged;
308 bool insnaccess;
309 unsigned brst_len:5;
310 unsigned brst_size:3; /* in power of 2 */
311
312 enum pl330_cachectrl dcctl;
313 enum pl330_cachectrl scctl;
314 enum pl330_byteswap swap;
315 struct pl330_config *pcfg;
316};
317
318/*
319 * One cycle of DMAC operation.
320 * There may be more than one xfer in a request.
321 */
322struct pl330_xfer {
323 u32 src_addr;
324 u32 dst_addr;
325 /* Size to xfer */
326 u32 bytes;
327};
328
329/* The xfer callbacks are made with one of these arguments. */
330enum pl330_op_err {
331 /* The all xfers in the request were success. */
332 PL330_ERR_NONE,
333 /* If req aborted due to global error. */
334 PL330_ERR_ABORT,
335 /* If req failed due to problem with Channel. */
336 PL330_ERR_FAIL,
337};
338
339enum dmamov_dst {
340 SAR = 0,
341 CCR,
342 DAR,
343};
344
345enum pl330_dst {
346 SRC = 0,
347 DST,
348};
349
350enum pl330_cond {
351 SINGLE,
352 BURST,
353 ALWAYS,
354};
355
356struct dma_pl330_desc;
357
358struct _pl330_req {
359 u32 mc_bus;
360 void *mc_cpu;
361 struct dma_pl330_desc *desc;
362};
363
364/* ToBeDone for tasklet */
365struct _pl330_tbd {
366 bool reset_dmac;
367 bool reset_mngr;
368 u8 reset_chan;
369};
370
371/* A DMAC Thread */
372struct pl330_thread {
373 u8 id;
374 int ev;
375 /* If the channel is not yet acquired by any client */
376 bool free;
377 /* Parent DMAC */
378 struct pl330_dmac *dmac;
379 /* Only two at a time */
380 struct _pl330_req req[2];
381 /* Index of the last enqueued request */
382 unsigned lstenq;
383 /* Index of the last submitted request or -1 if the DMA is stopped */
384 int req_running;
385};
386
387enum pl330_dmac_state {
388 UNINIT,
389 INIT,
390 DYING,
391};
392
393enum desc_status {
394 /* In the DMAC pool */
395 FREE,
396 /*
397 * Allocated to some channel during prep_xxx
398 * Also may be sitting on the work_list.
399 */
400 PREP,
401 /*
402 * Sitting on the work_list and already submitted
403 * to the PL330 core. Not more than two descriptors
404 * of a channel can be BUSY at any time.
405 */
406 BUSY,
407 /*
408 * Sitting on the channel work_list but xfer done
409 * by PL330 core
410 */
411 DONE,
412};
413
414struct dma_pl330_chan {
415 /* Schedule desc completion */
416 struct tasklet_struct task;
417
418 /* DMA-Engine Channel */
419 struct dma_chan chan;
420
421 /* List of submitted descriptors */
422 struct list_head submitted_list;
423 /* List of issued descriptors */
424 struct list_head work_list;
425 /* List of completed descriptors */
426 struct list_head completed_list;
427
428 /* Pointer to the DMAC that manages this channel,
429 * NULL if the channel is available to be acquired.
430 * As the parent, this DMAC also provides descriptors
431 * to the channel.
432 */
433 struct pl330_dmac *dmac;
434
435 /* To protect channel manipulation */
436 spinlock_t lock;
437
438 /*
439 * Hardware channel thread of PL330 DMAC. NULL if the channel is
440 * available.
441 */
442 struct pl330_thread *thread;
443
444 /* For D-to-M and M-to-D channels */
445 int burst_sz; /* the peripheral fifo width */
446 int burst_len; /* the number of burst */
447 dma_addr_t fifo_addr;
448
449 /* for cyclic capability */
450 bool cyclic;
451
452 /* for runtime pm tracking */
453 bool active;
454};
455
456struct pl330_dmac {
457 /* DMA-Engine Device */
458 struct dma_device ddma;
459
460 /* Holds info about sg limitations */
461 struct device_dma_parameters dma_parms;
462
463 /* Pool of descriptors available for the DMAC's channels */
464 struct list_head desc_pool;
465 /* To protect desc_pool manipulation */
466 spinlock_t pool_lock;
467
468 /* Size of MicroCode buffers for each channel. */
469 unsigned mcbufsz;
470 /* ioremap'ed address of PL330 registers. */
471 void __iomem *base;
472 /* Populated by the PL330 core driver during pl330_add */
473 struct pl330_config pcfg;
474
475 spinlock_t lock;
476 /* Maximum possible events/irqs */
477 int events[32];
478 /* BUS address of MicroCode buffer */
479 dma_addr_t mcode_bus;
480 /* CPU address of MicroCode buffer */
481 void *mcode_cpu;
482 /* List of all Channel threads */
483 struct pl330_thread *channels;
484 /* Pointer to the MANAGER thread */
485 struct pl330_thread *manager;
486 /* To handle bad news in interrupt */
487 struct tasklet_struct tasks;
488 struct _pl330_tbd dmac_tbd;
489 /* State of DMAC operation */
490 enum pl330_dmac_state state;
491 /* Holds list of reqs with due callbacks */
492 struct list_head req_done;
493
494 /* Peripheral channels connected to this DMAC */
495 unsigned int num_peripherals;
496 struct dma_pl330_chan *peripherals; /* keep at end */
497 int quirks;
498};
499
500static struct pl330_of_quirks {
501 char *quirk;
502 int id;
503} of_quirks[] = {
504 {
505 .quirk = "arm,pl330-broken-no-flushp",
506 .id = PL330_QUIRK_BROKEN_NO_FLUSHP,
507 }
508};
509
510struct dma_pl330_desc {
511 /* To attach to a queue as child */
512 struct list_head node;
513
514 /* Descriptor for the DMA Engine API */
515 struct dma_async_tx_descriptor txd;
516
517 /* Xfer for PL330 core */
518 struct pl330_xfer px;
519
520 struct pl330_reqcfg rqcfg;
521
522 enum desc_status status;
523
524 int bytes_requested;
525 bool last;
526
527 /* The channel which currently holds this desc */
528 struct dma_pl330_chan *pchan;
529
530 enum dma_transfer_direction rqtype;
531 /* Index of peripheral for the xfer. */
532 unsigned peri:5;
533 /* Hook to attach to DMAC's list of reqs with due callback */
534 struct list_head rqd;
535};
536
537struct _xfer_spec {
538 u32 ccr;
539 struct dma_pl330_desc *desc;
540};
541
542static inline bool _queue_empty(struct pl330_thread *thrd)
543{
544 return thrd->req[0].desc == NULL && thrd->req[1].desc == NULL;
545}
546
547static inline bool _queue_full(struct pl330_thread *thrd)
548{
549 return thrd->req[0].desc != NULL && thrd->req[1].desc != NULL;
550}
551
552static inline bool is_manager(struct pl330_thread *thrd)
553{
554 return thrd->dmac->manager == thrd;
555}
556
557/* If manager of the thread is in Non-Secure mode */
558static inline bool _manager_ns(struct pl330_thread *thrd)
559{
560 return (thrd->dmac->pcfg.mode & DMAC_MODE_NS) ? true : false;
561}
562
563static inline u32 get_revision(u32 periph_id)
564{
565 return (periph_id >> PERIPH_REV_SHIFT) & PERIPH_REV_MASK;
566}
567
568static inline u32 _emit_ADDH(unsigned dry_run, u8 buf[],
569 enum pl330_dst da, u16 val)
570{
571 if (dry_run)
572 return SZ_DMAADDH;
573
574 buf[0] = CMD_DMAADDH;
575 buf[0] |= (da << 1);
576 buf[1] = val;
577 buf[2] = val >> 8;
578
579 PL330_DBGCMD_DUMP(SZ_DMAADDH, "\tDMAADDH %s %u\n",
580 da == 1 ? "DA" : "SA", val);
581
582 return SZ_DMAADDH;
583}
584
585static inline u32 _emit_END(unsigned dry_run, u8 buf[])
586{
587 if (dry_run)
588 return SZ_DMAEND;
589
590 buf[0] = CMD_DMAEND;
591
592 PL330_DBGCMD_DUMP(SZ_DMAEND, "\tDMAEND\n");
593
594 return SZ_DMAEND;
595}
596
597static inline u32 _emit_FLUSHP(unsigned dry_run, u8 buf[], u8 peri)
598{
599 if (dry_run)
600 return SZ_DMAFLUSHP;
601
602 buf[0] = CMD_DMAFLUSHP;
603
604 peri &= 0x1f;
605 peri <<= 3;
606 buf[1] = peri;
607
608 PL330_DBGCMD_DUMP(SZ_DMAFLUSHP, "\tDMAFLUSHP %u\n", peri >> 3);
609
610 return SZ_DMAFLUSHP;
611}
612
613static inline u32 _emit_LD(unsigned dry_run, u8 buf[], enum pl330_cond cond)
614{
615 if (dry_run)
616 return SZ_DMALD;
617
618 buf[0] = CMD_DMALD;
619
620 if (cond == SINGLE)
621 buf[0] |= (0 << 1) | (1 << 0);
622 else if (cond == BURST)
623 buf[0] |= (1 << 1) | (1 << 0);
624
625 PL330_DBGCMD_DUMP(SZ_DMALD, "\tDMALD%c\n",
626 cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'));
627
628 return SZ_DMALD;
629}
630
631static inline u32 _emit_LDP(unsigned dry_run, u8 buf[],
632 enum pl330_cond cond, u8 peri)
633{
634 if (dry_run)
635 return SZ_DMALDP;
636
637 buf[0] = CMD_DMALDP;
638
639 if (cond == BURST)
640 buf[0] |= (1 << 1);
641
642 peri &= 0x1f;
643 peri <<= 3;
644 buf[1] = peri;
645
646 PL330_DBGCMD_DUMP(SZ_DMALDP, "\tDMALDP%c %u\n",
647 cond == SINGLE ? 'S' : 'B', peri >> 3);
648
649 return SZ_DMALDP;
650}
651
652static inline u32 _emit_LP(unsigned dry_run, u8 buf[],
653 unsigned loop, u8 cnt)
654{
655 if (dry_run)
656 return SZ_DMALP;
657
658 buf[0] = CMD_DMALP;
659
660 if (loop)
661 buf[0] |= (1 << 1);
662
663 cnt--; /* DMAC increments by 1 internally */
664 buf[1] = cnt;
665
666 PL330_DBGCMD_DUMP(SZ_DMALP, "\tDMALP_%c %u\n", loop ? '1' : '0', cnt);
667
668 return SZ_DMALP;
669}
670
671struct _arg_LPEND {
672 enum pl330_cond cond;
673 bool forever;
674 unsigned loop;
675 u8 bjump;
676};
677
678static inline u32 _emit_LPEND(unsigned dry_run, u8 buf[],
679 const struct _arg_LPEND *arg)
680{
681 enum pl330_cond cond = arg->cond;
682 bool forever = arg->forever;
683 unsigned loop = arg->loop;
684 u8 bjump = arg->bjump;
685
686 if (dry_run)
687 return SZ_DMALPEND;
688
689 buf[0] = CMD_DMALPEND;
690
691 if (loop)
692 buf[0] |= (1 << 2);
693
694 if (!forever)
695 buf[0] |= (1 << 4);
696
697 if (cond == SINGLE)
698 buf[0] |= (0 << 1) | (1 << 0);
699 else if (cond == BURST)
700 buf[0] |= (1 << 1) | (1 << 0);
701
702 buf[1] = bjump;
703
704 PL330_DBGCMD_DUMP(SZ_DMALPEND, "\tDMALP%s%c_%c bjmpto_%x\n",
705 forever ? "FE" : "END",
706 cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'),
707 loop ? '1' : '0',
708 bjump);
709
710 return SZ_DMALPEND;
711}
712
713static inline u32 _emit_KILL(unsigned dry_run, u8 buf[])
714{
715 if (dry_run)
716 return SZ_DMAKILL;
717
718 buf[0] = CMD_DMAKILL;
719
720 return SZ_DMAKILL;
721}
722
723static inline u32 _emit_MOV(unsigned dry_run, u8 buf[],
724 enum dmamov_dst dst, u32 val)
725{
726 if (dry_run)
727 return SZ_DMAMOV;
728
729 buf[0] = CMD_DMAMOV;
730 buf[1] = dst;
731 buf[2] = val;
732 buf[3] = val >> 8;
733 buf[4] = val >> 16;
734 buf[5] = val >> 24;
735
736 PL330_DBGCMD_DUMP(SZ_DMAMOV, "\tDMAMOV %s 0x%x\n",
737 dst == SAR ? "SAR" : (dst == DAR ? "DAR" : "CCR"), val);
738
739 return SZ_DMAMOV;
740}
741
742static inline u32 _emit_NOP(unsigned dry_run, u8 buf[])
743{
744 if (dry_run)
745 return SZ_DMANOP;
746
747 buf[0] = CMD_DMANOP;
748
749 PL330_DBGCMD_DUMP(SZ_DMANOP, "\tDMANOP\n");
750
751 return SZ_DMANOP;
752}
753
754static inline u32 _emit_RMB(unsigned dry_run, u8 buf[])
755{
756 if (dry_run)
757 return SZ_DMARMB;
758
759 buf[0] = CMD_DMARMB;
760
761 PL330_DBGCMD_DUMP(SZ_DMARMB, "\tDMARMB\n");
762
763 return SZ_DMARMB;
764}
765
766static inline u32 _emit_SEV(unsigned dry_run, u8 buf[], u8 ev)
767{
768 if (dry_run)
769 return SZ_DMASEV;
770
771 buf[0] = CMD_DMASEV;
772
773 ev &= 0x1f;
774 ev <<= 3;
775 buf[1] = ev;
776
777 PL330_DBGCMD_DUMP(SZ_DMASEV, "\tDMASEV %u\n", ev >> 3);
778
779 return SZ_DMASEV;
780}
781
782static inline u32 _emit_ST(unsigned dry_run, u8 buf[], enum pl330_cond cond)
783{
784 if (dry_run)
785 return SZ_DMAST;
786
787 buf[0] = CMD_DMAST;
788
789 if (cond == SINGLE)
790 buf[0] |= (0 << 1) | (1 << 0);
791 else if (cond == BURST)
792 buf[0] |= (1 << 1) | (1 << 0);
793
794 PL330_DBGCMD_DUMP(SZ_DMAST, "\tDMAST%c\n",
795 cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'));
796
797 return SZ_DMAST;
798}
799
800static inline u32 _emit_STP(unsigned dry_run, u8 buf[],
801 enum pl330_cond cond, u8 peri)
802{
803 if (dry_run)
804 return SZ_DMASTP;
805
806 buf[0] = CMD_DMASTP;
807
808 if (cond == BURST)
809 buf[0] |= (1 << 1);
810
811 peri &= 0x1f;
812 peri <<= 3;
813 buf[1] = peri;
814
815 PL330_DBGCMD_DUMP(SZ_DMASTP, "\tDMASTP%c %u\n",
816 cond == SINGLE ? 'S' : 'B', peri >> 3);
817
818 return SZ_DMASTP;
819}
820
821static inline u32 _emit_STZ(unsigned dry_run, u8 buf[])
822{
823 if (dry_run)
824 return SZ_DMASTZ;
825
826 buf[0] = CMD_DMASTZ;
827
828 PL330_DBGCMD_DUMP(SZ_DMASTZ, "\tDMASTZ\n");
829
830 return SZ_DMASTZ;
831}
832
833static inline u32 _emit_WFE(unsigned dry_run, u8 buf[], u8 ev,
834 unsigned invalidate)
835{
836 if (dry_run)
837 return SZ_DMAWFE;
838
839 buf[0] = CMD_DMAWFE;
840
841 ev &= 0x1f;
842 ev <<= 3;
843 buf[1] = ev;
844
845 if (invalidate)
846 buf[1] |= (1 << 1);
847
848 PL330_DBGCMD_DUMP(SZ_DMAWFE, "\tDMAWFE %u%s\n",
849 ev >> 3, invalidate ? ", I" : "");
850
851 return SZ_DMAWFE;
852}
853
854static inline u32 _emit_WFP(unsigned dry_run, u8 buf[],
855 enum pl330_cond cond, u8 peri)
856{
857 if (dry_run)
858 return SZ_DMAWFP;
859
860 buf[0] = CMD_DMAWFP;
861
862 if (cond == SINGLE)
863 buf[0] |= (0 << 1) | (0 << 0);
864 else if (cond == BURST)
865 buf[0] |= (1 << 1) | (0 << 0);
866 else
867 buf[0] |= (0 << 1) | (1 << 0);
868
869 peri &= 0x1f;
870 peri <<= 3;
871 buf[1] = peri;
872
873 PL330_DBGCMD_DUMP(SZ_DMAWFP, "\tDMAWFP%c %u\n",
874 cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'P'), peri >> 3);
875
876 return SZ_DMAWFP;
877}
878
879static inline u32 _emit_WMB(unsigned dry_run, u8 buf[])
880{
881 if (dry_run)
882 return SZ_DMAWMB;
883
884 buf[0] = CMD_DMAWMB;
885
886 PL330_DBGCMD_DUMP(SZ_DMAWMB, "\tDMAWMB\n");
887
888 return SZ_DMAWMB;
889}
890
891struct _arg_GO {
892 u8 chan;
893 u32 addr;
894 unsigned ns;
895};
896
897static inline u32 _emit_GO(unsigned dry_run, u8 buf[],
898 const struct _arg_GO *arg)
899{
900 u8 chan = arg->chan;
901 u32 addr = arg->addr;
902 unsigned ns = arg->ns;
903
904 if (dry_run)
905 return SZ_DMAGO;
906
907 buf[0] = CMD_DMAGO;
908 buf[0] |= (ns << 1);
909 buf[1] = chan & 0x7;
910 buf[2] = addr;
911 buf[3] = addr >> 8;
912 buf[4] = addr >> 16;
913 buf[5] = addr >> 24;
914
915 return SZ_DMAGO;
916}
917
918#define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t)
919
920/* Returns Time-Out */
921static bool _until_dmac_idle(struct pl330_thread *thrd)
922{
923 void __iomem *regs = thrd->dmac->base;
924 unsigned long loops = msecs_to_loops(5);
925
926 do {
927 /* Until Manager is Idle */
928 if (!(readl(regs + DBGSTATUS) & DBG_BUSY))
929 break;
930
931 cpu_relax();
932 } while (--loops);
933
934 if (!loops)
935 return true;
936
937 return false;
938}
939
940static inline void _execute_DBGINSN(struct pl330_thread *thrd,
941 u8 insn[], bool as_manager)
942{
943 void __iomem *regs = thrd->dmac->base;
944 u32 val;
945
946 val = (insn[0] << 16) | (insn[1] << 24);
947 if (!as_manager) {
948 val |= (1 << 0);
949 val |= (thrd->id << 8); /* Channel Number */
950 }
951 writel(val, regs + DBGINST0);
952
953 val = le32_to_cpu(*((__le32 *)&insn[2]));
954 writel(val, regs + DBGINST1);
955
956 /* If timed out due to halted state-machine */
957 if (_until_dmac_idle(thrd)) {
958 dev_err(thrd->dmac->ddma.dev, "DMAC halted!\n");
959 return;
960 }
961
962 /* Get going */
963 writel(0, regs + DBGCMD);
964}
965
966static inline u32 _state(struct pl330_thread *thrd)
967{
968 void __iomem *regs = thrd->dmac->base;
969 u32 val;
970
971 if (is_manager(thrd))
972 val = readl(regs + DS) & 0xf;
973 else
974 val = readl(regs + CS(thrd->id)) & 0xf;
975
976 switch (val) {
977 case DS_ST_STOP:
978 return PL330_STATE_STOPPED;
979 case DS_ST_EXEC:
980 return PL330_STATE_EXECUTING;
981 case DS_ST_CMISS:
982 return PL330_STATE_CACHEMISS;
983 case DS_ST_UPDTPC:
984 return PL330_STATE_UPDTPC;
985 case DS_ST_WFE:
986 return PL330_STATE_WFE;
987 case DS_ST_FAULT:
988 return PL330_STATE_FAULTING;
989 case DS_ST_ATBRR:
990 if (is_manager(thrd))
991 return PL330_STATE_INVALID;
992 else
993 return PL330_STATE_ATBARRIER;
994 case DS_ST_QBUSY:
995 if (is_manager(thrd))
996 return PL330_STATE_INVALID;
997 else
998 return PL330_STATE_QUEUEBUSY;
999 case DS_ST_WFP:
1000 if (is_manager(thrd))
1001 return PL330_STATE_INVALID;
1002 else
1003 return PL330_STATE_WFP;
1004 case DS_ST_KILL:
1005 if (is_manager(thrd))
1006 return PL330_STATE_INVALID;
1007 else
1008 return PL330_STATE_KILLING;
1009 case DS_ST_CMPLT:
1010 if (is_manager(thrd))
1011 return PL330_STATE_INVALID;
1012 else
1013 return PL330_STATE_COMPLETING;
1014 case DS_ST_FLTCMP:
1015 if (is_manager(thrd))
1016 return PL330_STATE_INVALID;
1017 else
1018 return PL330_STATE_FAULT_COMPLETING;
1019 default:
1020 return PL330_STATE_INVALID;
1021 }
1022}
1023
1024static void _stop(struct pl330_thread *thrd)
1025{
1026 void __iomem *regs = thrd->dmac->base;
1027 u8 insn[6] = {0, 0, 0, 0, 0, 0};
1028
1029 if (_state(thrd) == PL330_STATE_FAULT_COMPLETING)
1030 UNTIL(thrd, PL330_STATE_FAULTING | PL330_STATE_KILLING);
1031
1032 /* Return if nothing needs to be done */
1033 if (_state(thrd) == PL330_STATE_COMPLETING
1034 || _state(thrd) == PL330_STATE_KILLING
1035 || _state(thrd) == PL330_STATE_STOPPED)
1036 return;
1037
1038 _emit_KILL(0, insn);
1039
1040 /* Stop generating interrupts for SEV */
1041 writel(readl(regs + INTEN) & ~(1 << thrd->ev), regs + INTEN);
1042
1043 _execute_DBGINSN(thrd, insn, is_manager(thrd));
1044}
1045
1046/* Start doing req 'idx' of thread 'thrd' */
1047static bool _trigger(struct pl330_thread *thrd)
1048{
1049 void __iomem *regs = thrd->dmac->base;
1050 struct _pl330_req *req;
1051 struct dma_pl330_desc *desc;
1052 struct _arg_GO go;
1053 unsigned ns;
1054 u8 insn[6] = {0, 0, 0, 0, 0, 0};
1055 int idx;
1056
1057 /* Return if already ACTIVE */
1058 if (_state(thrd) != PL330_STATE_STOPPED)
1059 return true;
1060
1061 idx = 1 - thrd->lstenq;
1062 if (thrd->req[idx].desc != NULL) {
1063 req = &thrd->req[idx];
1064 } else {
1065 idx = thrd->lstenq;
1066 if (thrd->req[idx].desc != NULL)
1067 req = &thrd->req[idx];
1068 else
1069 req = NULL;
1070 }
1071
1072 /* Return if no request */
1073 if (!req)
1074 return true;
1075
1076 /* Return if req is running */
1077 if (idx == thrd->req_running)
1078 return true;
1079
1080 desc = req->desc;
1081
1082 ns = desc->rqcfg.nonsecure ? 1 : 0;
1083
1084 /* See 'Abort Sources' point-4 at Page 2-25 */
1085 if (_manager_ns(thrd) && !ns)
1086 dev_info(thrd->dmac->ddma.dev, "%s:%d Recipe for ABORT!\n",
1087 __func__, __LINE__);
1088
1089 go.chan = thrd->id;
1090 go.addr = req->mc_bus;
1091 go.ns = ns;
1092 _emit_GO(0, insn, &go);
1093
1094 /* Set to generate interrupts for SEV */
1095 writel(readl(regs + INTEN) | (1 << thrd->ev), regs + INTEN);
1096
1097 /* Only manager can execute GO */
1098 _execute_DBGINSN(thrd, insn, true);
1099
1100 thrd->req_running = idx;
1101
1102 return true;
1103}
1104
1105static bool _start(struct pl330_thread *thrd)
1106{
1107 switch (_state(thrd)) {
1108 case PL330_STATE_FAULT_COMPLETING:
1109 UNTIL(thrd, PL330_STATE_FAULTING | PL330_STATE_KILLING);
1110
1111 if (_state(thrd) == PL330_STATE_KILLING)
1112 UNTIL(thrd, PL330_STATE_STOPPED)
1113
1114 case PL330_STATE_FAULTING:
1115 _stop(thrd);
1116
1117 case PL330_STATE_KILLING:
1118 case PL330_STATE_COMPLETING:
1119 UNTIL(thrd, PL330_STATE_STOPPED)
1120
1121 case PL330_STATE_STOPPED:
1122 return _trigger(thrd);
1123
1124 case PL330_STATE_WFP:
1125 case PL330_STATE_QUEUEBUSY:
1126 case PL330_STATE_ATBARRIER:
1127 case PL330_STATE_UPDTPC:
1128 case PL330_STATE_CACHEMISS:
1129 case PL330_STATE_EXECUTING:
1130 return true;
1131
1132 case PL330_STATE_WFE: /* For RESUME, nothing yet */
1133 default:
1134 return false;
1135 }
1136}
1137
1138static inline int _ldst_memtomem(unsigned dry_run, u8 buf[],
1139 const struct _xfer_spec *pxs, int cyc)
1140{
1141 int off = 0;
1142 struct pl330_config *pcfg = pxs->desc->rqcfg.pcfg;
1143
1144 /* check lock-up free version */
1145 if (get_revision(pcfg->periph_id) >= PERIPH_REV_R1P0) {
1146 while (cyc--) {
1147 off += _emit_LD(dry_run, &buf[off], ALWAYS);
1148 off += _emit_ST(dry_run, &buf[off], ALWAYS);
1149 }
1150 } else {
1151 while (cyc--) {
1152 off += _emit_LD(dry_run, &buf[off], ALWAYS);
1153 off += _emit_RMB(dry_run, &buf[off]);
1154 off += _emit_ST(dry_run, &buf[off], ALWAYS);
1155 off += _emit_WMB(dry_run, &buf[off]);
1156 }
1157 }
1158
1159 return off;
1160}
1161
1162static inline int _ldst_devtomem(struct pl330_dmac *pl330, unsigned dry_run,
1163 u8 buf[], const struct _xfer_spec *pxs,
1164 int cyc)
1165{
1166 int off = 0;
1167 enum pl330_cond cond;
1168
1169 if (pl330->quirks & PL330_QUIRK_BROKEN_NO_FLUSHP)
1170 cond = BURST;
1171 else
1172 cond = SINGLE;
1173
1174 while (cyc--) {
1175 off += _emit_WFP(dry_run, &buf[off], cond, pxs->desc->peri);
1176 off += _emit_LDP(dry_run, &buf[off], cond, pxs->desc->peri);
1177 off += _emit_ST(dry_run, &buf[off], ALWAYS);
1178
1179 if (!(pl330->quirks & PL330_QUIRK_BROKEN_NO_FLUSHP))
1180 off += _emit_FLUSHP(dry_run, &buf[off],
1181 pxs->desc->peri);
1182 }
1183
1184 return off;
1185}
1186
1187static inline int _ldst_memtodev(struct pl330_dmac *pl330,
1188 unsigned dry_run, u8 buf[],
1189 const struct _xfer_spec *pxs, int cyc)
1190{
1191 int off = 0;
1192 enum pl330_cond cond;
1193
1194 if (pl330->quirks & PL330_QUIRK_BROKEN_NO_FLUSHP)
1195 cond = BURST;
1196 else
1197 cond = SINGLE;
1198
1199 while (cyc--) {
1200 off += _emit_WFP(dry_run, &buf[off], cond, pxs->desc->peri);
1201 off += _emit_LD(dry_run, &buf[off], ALWAYS);
1202 off += _emit_STP(dry_run, &buf[off], cond, pxs->desc->peri);
1203
1204 if (!(pl330->quirks & PL330_QUIRK_BROKEN_NO_FLUSHP))
1205 off += _emit_FLUSHP(dry_run, &buf[off],
1206 pxs->desc->peri);
1207 }
1208
1209 return off;
1210}
1211
1212static int _bursts(struct pl330_dmac *pl330, unsigned dry_run, u8 buf[],
1213 const struct _xfer_spec *pxs, int cyc)
1214{
1215 int off = 0;
1216
1217 switch (pxs->desc->rqtype) {
1218 case DMA_MEM_TO_DEV:
1219 off += _ldst_memtodev(pl330, dry_run, &buf[off], pxs, cyc);
1220 break;
1221 case DMA_DEV_TO_MEM:
1222 off += _ldst_devtomem(pl330, dry_run, &buf[off], pxs, cyc);
1223 break;
1224 case DMA_MEM_TO_MEM:
1225 off += _ldst_memtomem(dry_run, &buf[off], pxs, cyc);
1226 break;
1227 default:
1228 off += 0x40000000; /* Scare off the Client */
1229 break;
1230 }
1231
1232 return off;
1233}
1234
1235/* Returns bytes consumed and updates bursts */
1236static inline int _loop(struct pl330_dmac *pl330, unsigned dry_run, u8 buf[],
1237 unsigned long *bursts, const struct _xfer_spec *pxs)
1238{
1239 int cyc, cycmax, szlp, szlpend, szbrst, off;
1240 unsigned lcnt0, lcnt1, ljmp0, ljmp1;
1241 struct _arg_LPEND lpend;
1242
1243 if (*bursts == 1)
1244 return _bursts(pl330, dry_run, buf, pxs, 1);
1245
1246 /* Max iterations possible in DMALP is 256 */
1247 if (*bursts >= 256*256) {
1248 lcnt1 = 256;
1249 lcnt0 = 256;
1250 cyc = *bursts / lcnt1 / lcnt0;
1251 } else if (*bursts > 256) {
1252 lcnt1 = 256;
1253 lcnt0 = *bursts / lcnt1;
1254 cyc = 1;
1255 } else {
1256 lcnt1 = *bursts;
1257 lcnt0 = 0;
1258 cyc = 1;
1259 }
1260
1261 szlp = _emit_LP(1, buf, 0, 0);
1262 szbrst = _bursts(pl330, 1, buf, pxs, 1);
1263
1264 lpend.cond = ALWAYS;
1265 lpend.forever = false;
1266 lpend.loop = 0;
1267 lpend.bjump = 0;
1268 szlpend = _emit_LPEND(1, buf, &lpend);
1269
1270 if (lcnt0) {
1271 szlp *= 2;
1272 szlpend *= 2;
1273 }
1274
1275 /*
1276 * Max bursts that we can unroll due to limit on the
1277 * size of backward jump that can be encoded in DMALPEND
1278 * which is 8-bits and hence 255
1279 */
1280 cycmax = (255 - (szlp + szlpend)) / szbrst;
1281
1282 cyc = (cycmax < cyc) ? cycmax : cyc;
1283
1284 off = 0;
1285
1286 if (lcnt0) {
1287 off += _emit_LP(dry_run, &buf[off], 0, lcnt0);
1288 ljmp0 = off;
1289 }
1290
1291 off += _emit_LP(dry_run, &buf[off], 1, lcnt1);
1292 ljmp1 = off;
1293
1294 off += _bursts(pl330, dry_run, &buf[off], pxs, cyc);
1295
1296 lpend.cond = ALWAYS;
1297 lpend.forever = false;
1298 lpend.loop = 1;
1299 lpend.bjump = off - ljmp1;
1300 off += _emit_LPEND(dry_run, &buf[off], &lpend);
1301
1302 if (lcnt0) {
1303 lpend.cond = ALWAYS;
1304 lpend.forever = false;
1305 lpend.loop = 0;
1306 lpend.bjump = off - ljmp0;
1307 off += _emit_LPEND(dry_run, &buf[off], &lpend);
1308 }
1309
1310 *bursts = lcnt1 * cyc;
1311 if (lcnt0)
1312 *bursts *= lcnt0;
1313
1314 return off;
1315}
1316
1317static inline int _setup_loops(struct pl330_dmac *pl330,
1318 unsigned dry_run, u8 buf[],
1319 const struct _xfer_spec *pxs)
1320{
1321 struct pl330_xfer *x = &pxs->desc->px;
1322 u32 ccr = pxs->ccr;
1323 unsigned long c, bursts = BYTE_TO_BURST(x->bytes, ccr);
1324 int off = 0;
1325
1326 while (bursts) {
1327 c = bursts;
1328 off += _loop(pl330, dry_run, &buf[off], &c, pxs);
1329 bursts -= c;
1330 }
1331
1332 return off;
1333}
1334
1335static inline int _setup_xfer(struct pl330_dmac *pl330,
1336 unsigned dry_run, u8 buf[],
1337 const struct _xfer_spec *pxs)
1338{
1339 struct pl330_xfer *x = &pxs->desc->px;
1340 int off = 0;
1341
1342 /* DMAMOV SAR, x->src_addr */
1343 off += _emit_MOV(dry_run, &buf[off], SAR, x->src_addr);
1344 /* DMAMOV DAR, x->dst_addr */
1345 off += _emit_MOV(dry_run, &buf[off], DAR, x->dst_addr);
1346
1347 /* Setup Loop(s) */
1348 off += _setup_loops(pl330, dry_run, &buf[off], pxs);
1349
1350 return off;
1351}
1352
1353/*
1354 * A req is a sequence of one or more xfer units.
1355 * Returns the number of bytes taken to setup the MC for the req.
1356 */
1357static int _setup_req(struct pl330_dmac *pl330, unsigned dry_run,
1358 struct pl330_thread *thrd, unsigned index,
1359 struct _xfer_spec *pxs)
1360{
1361 struct _pl330_req *req = &thrd->req[index];
1362 struct pl330_xfer *x;
1363 u8 *buf = req->mc_cpu;
1364 int off = 0;
1365
1366 PL330_DBGMC_START(req->mc_bus);
1367
1368 /* DMAMOV CCR, ccr */
1369 off += _emit_MOV(dry_run, &buf[off], CCR, pxs->ccr);
1370
1371 x = &pxs->desc->px;
1372 /* Error if xfer length is not aligned at burst size */
1373 if (x->bytes % (BRST_SIZE(pxs->ccr) * BRST_LEN(pxs->ccr)))
1374 return -EINVAL;
1375
1376 off += _setup_xfer(pl330, dry_run, &buf[off], pxs);
1377
1378 /* DMASEV peripheral/event */
1379 off += _emit_SEV(dry_run, &buf[off], thrd->ev);
1380 /* DMAEND */
1381 off += _emit_END(dry_run, &buf[off]);
1382
1383 return off;
1384}
1385
1386static inline u32 _prepare_ccr(const struct pl330_reqcfg *rqc)
1387{
1388 u32 ccr = 0;
1389
1390 if (rqc->src_inc)
1391 ccr |= CC_SRCINC;
1392
1393 if (rqc->dst_inc)
1394 ccr |= CC_DSTINC;
1395
1396 /* We set same protection levels for Src and DST for now */
1397 if (rqc->privileged)
1398 ccr |= CC_SRCPRI | CC_DSTPRI;
1399 if (rqc->nonsecure)
1400 ccr |= CC_SRCNS | CC_DSTNS;
1401 if (rqc->insnaccess)
1402 ccr |= CC_SRCIA | CC_DSTIA;
1403
1404 ccr |= (((rqc->brst_len - 1) & 0xf) << CC_SRCBRSTLEN_SHFT);
1405 ccr |= (((rqc->brst_len - 1) & 0xf) << CC_DSTBRSTLEN_SHFT);
1406
1407 ccr |= (rqc->brst_size << CC_SRCBRSTSIZE_SHFT);
1408 ccr |= (rqc->brst_size << CC_DSTBRSTSIZE_SHFT);
1409
1410 ccr |= (rqc->scctl << CC_SRCCCTRL_SHFT);
1411 ccr |= (rqc->dcctl << CC_DSTCCTRL_SHFT);
1412
1413 ccr |= (rqc->swap << CC_SWAP_SHFT);
1414
1415 return ccr;
1416}
1417
1418/*
1419 * Submit a list of xfers after which the client wants notification.
1420 * Client is not notified after each xfer unit, just once after all
1421 * xfer units are done or some error occurs.
1422 */
1423static int pl330_submit_req(struct pl330_thread *thrd,
1424 struct dma_pl330_desc *desc)
1425{
1426 struct pl330_dmac *pl330 = thrd->dmac;
1427 struct _xfer_spec xs;
1428 unsigned long flags;
1429 unsigned idx;
1430 u32 ccr;
1431 int ret = 0;
1432
1433 if (pl330->state == DYING
1434 || pl330->dmac_tbd.reset_chan & (1 << thrd->id)) {
1435 dev_info(thrd->dmac->ddma.dev, "%s:%d\n",
1436 __func__, __LINE__);
1437 return -EAGAIN;
1438 }
1439
1440 /* If request for non-existing peripheral */
1441 if (desc->rqtype != DMA_MEM_TO_MEM &&
1442 desc->peri >= pl330->pcfg.num_peri) {
1443 dev_info(thrd->dmac->ddma.dev,
1444 "%s:%d Invalid peripheral(%u)!\n",
1445 __func__, __LINE__, desc->peri);
1446 return -EINVAL;
1447 }
1448
1449 spin_lock_irqsave(&pl330->lock, flags);
1450
1451 if (_queue_full(thrd)) {
1452 ret = -EAGAIN;
1453 goto xfer_exit;
1454 }
1455
1456 /* Prefer Secure Channel */
1457 if (!_manager_ns(thrd))
1458 desc->rqcfg.nonsecure = 0;
1459 else
1460 desc->rqcfg.nonsecure = 1;
1461
1462 ccr = _prepare_ccr(&desc->rqcfg);
1463
1464 idx = thrd->req[0].desc == NULL ? 0 : 1;
1465
1466 xs.ccr = ccr;
1467 xs.desc = desc;
1468
1469 /* First dry run to check if req is acceptable */
1470 ret = _setup_req(pl330, 1, thrd, idx, &xs);
1471 if (ret < 0)
1472 goto xfer_exit;
1473
1474 if (ret > pl330->mcbufsz / 2) {
1475 dev_info(pl330->ddma.dev, "%s:%d Try increasing mcbufsz (%i/%i)\n",
1476 __func__, __LINE__, ret, pl330->mcbufsz / 2);
1477 ret = -ENOMEM;
1478 goto xfer_exit;
1479 }
1480
1481 /* Hook the request */
1482 thrd->lstenq = idx;
1483 thrd->req[idx].desc = desc;
1484 _setup_req(pl330, 0, thrd, idx, &xs);
1485
1486 ret = 0;
1487
1488xfer_exit:
1489 spin_unlock_irqrestore(&pl330->lock, flags);
1490
1491 return ret;
1492}
1493
1494static void dma_pl330_rqcb(struct dma_pl330_desc *desc, enum pl330_op_err err)
1495{
1496 struct dma_pl330_chan *pch;
1497 unsigned long flags;
1498
1499 if (!desc)
1500 return;
1501
1502 pch = desc->pchan;
1503
1504 /* If desc aborted */
1505 if (!pch)
1506 return;
1507
1508 spin_lock_irqsave(&pch->lock, flags);
1509
1510 desc->status = DONE;
1511
1512 spin_unlock_irqrestore(&pch->lock, flags);
1513
1514 tasklet_schedule(&pch->task);
1515}
1516
1517static void pl330_dotask(unsigned long data)
1518{
1519 struct pl330_dmac *pl330 = (struct pl330_dmac *) data;
1520 unsigned long flags;
1521 int i;
1522
1523 spin_lock_irqsave(&pl330->lock, flags);
1524
1525 /* The DMAC itself gone nuts */
1526 if (pl330->dmac_tbd.reset_dmac) {
1527 pl330->state = DYING;
1528 /* Reset the manager too */
1529 pl330->dmac_tbd.reset_mngr = true;
1530 /* Clear the reset flag */
1531 pl330->dmac_tbd.reset_dmac = false;
1532 }
1533
1534 if (pl330->dmac_tbd.reset_mngr) {
1535 _stop(pl330->manager);
1536 /* Reset all channels */
1537 pl330->dmac_tbd.reset_chan = (1 << pl330->pcfg.num_chan) - 1;
1538 /* Clear the reset flag */
1539 pl330->dmac_tbd.reset_mngr = false;
1540 }
1541
1542 for (i = 0; i < pl330->pcfg.num_chan; i++) {
1543
1544 if (pl330->dmac_tbd.reset_chan & (1 << i)) {
1545 struct pl330_thread *thrd = &pl330->channels[i];
1546 void __iomem *regs = pl330->base;
1547 enum pl330_op_err err;
1548
1549 _stop(thrd);
1550
1551 if (readl(regs + FSC) & (1 << thrd->id))
1552 err = PL330_ERR_FAIL;
1553 else
1554 err = PL330_ERR_ABORT;
1555
1556 spin_unlock_irqrestore(&pl330->lock, flags);
1557 dma_pl330_rqcb(thrd->req[1 - thrd->lstenq].desc, err);
1558 dma_pl330_rqcb(thrd->req[thrd->lstenq].desc, err);
1559 spin_lock_irqsave(&pl330->lock, flags);
1560
1561 thrd->req[0].desc = NULL;
1562 thrd->req[1].desc = NULL;
1563 thrd->req_running = -1;
1564
1565 /* Clear the reset flag */
1566 pl330->dmac_tbd.reset_chan &= ~(1 << i);
1567 }
1568 }
1569
1570 spin_unlock_irqrestore(&pl330->lock, flags);
1571
1572 return;
1573}
1574
1575/* Returns 1 if state was updated, 0 otherwise */
1576static int pl330_update(struct pl330_dmac *pl330)
1577{
1578 struct dma_pl330_desc *descdone, *tmp;
1579 unsigned long flags;
1580 void __iomem *regs;
1581 u32 val;
1582 int id, ev, ret = 0;
1583
1584 regs = pl330->base;
1585
1586 spin_lock_irqsave(&pl330->lock, flags);
1587
1588 val = readl(regs + FSM) & 0x1;
1589 if (val)
1590 pl330->dmac_tbd.reset_mngr = true;
1591 else
1592 pl330->dmac_tbd.reset_mngr = false;
1593
1594 val = readl(regs + FSC) & ((1 << pl330->pcfg.num_chan) - 1);
1595 pl330->dmac_tbd.reset_chan |= val;
1596 if (val) {
1597 int i = 0;
1598 while (i < pl330->pcfg.num_chan) {
1599 if (val & (1 << i)) {
1600 dev_info(pl330->ddma.dev,
1601 "Reset Channel-%d\t CS-%x FTC-%x\n",
1602 i, readl(regs + CS(i)),
1603 readl(regs + FTC(i)));
1604 _stop(&pl330->channels[i]);
1605 }
1606 i++;
1607 }
1608 }
1609
1610 /* Check which event happened i.e, thread notified */
1611 val = readl(regs + ES);
1612 if (pl330->pcfg.num_events < 32
1613 && val & ~((1 << pl330->pcfg.num_events) - 1)) {
1614 pl330->dmac_tbd.reset_dmac = true;
1615 dev_err(pl330->ddma.dev, "%s:%d Unexpected!\n", __func__,
1616 __LINE__);
1617 ret = 1;
1618 goto updt_exit;
1619 }
1620
1621 for (ev = 0; ev < pl330->pcfg.num_events; ev++) {
1622 if (val & (1 << ev)) { /* Event occurred */
1623 struct pl330_thread *thrd;
1624 u32 inten = readl(regs + INTEN);
1625 int active;
1626
1627 /* Clear the event */
1628 if (inten & (1 << ev))
1629 writel(1 << ev, regs + INTCLR);
1630
1631 ret = 1;
1632
1633 id = pl330->events[ev];
1634
1635 thrd = &pl330->channels[id];
1636
1637 active = thrd->req_running;
1638 if (active == -1) /* Aborted */
1639 continue;
1640
1641 /* Detach the req */
1642 descdone = thrd->req[active].desc;
1643 thrd->req[active].desc = NULL;
1644
1645 thrd->req_running = -1;
1646
1647 /* Get going again ASAP */
1648 _start(thrd);
1649
1650 /* For now, just make a list of callbacks to be done */
1651 list_add_tail(&descdone->rqd, &pl330->req_done);
1652 }
1653 }
1654
1655 /* Now that we are in no hurry, do the callbacks */
1656 list_for_each_entry_safe(descdone, tmp, &pl330->req_done, rqd) {
1657 list_del(&descdone->rqd);
1658 spin_unlock_irqrestore(&pl330->lock, flags);
1659 dma_pl330_rqcb(descdone, PL330_ERR_NONE);
1660 spin_lock_irqsave(&pl330->lock, flags);
1661 }
1662
1663updt_exit:
1664 spin_unlock_irqrestore(&pl330->lock, flags);
1665
1666 if (pl330->dmac_tbd.reset_dmac
1667 || pl330->dmac_tbd.reset_mngr
1668 || pl330->dmac_tbd.reset_chan) {
1669 ret = 1;
1670 tasklet_schedule(&pl330->tasks);
1671 }
1672
1673 return ret;
1674}
1675
1676/* Reserve an event */
1677static inline int _alloc_event(struct pl330_thread *thrd)
1678{
1679 struct pl330_dmac *pl330 = thrd->dmac;
1680 int ev;
1681
1682 for (ev = 0; ev < pl330->pcfg.num_events; ev++)
1683 if (pl330->events[ev] == -1) {
1684 pl330->events[ev] = thrd->id;
1685 return ev;
1686 }
1687
1688 return -1;
1689}
1690
1691static bool _chan_ns(const struct pl330_dmac *pl330, int i)
1692{
1693 return pl330->pcfg.irq_ns & (1 << i);
1694}
1695
1696/* Upon success, returns IdentityToken for the
1697 * allocated channel, NULL otherwise.
1698 */
1699static struct pl330_thread *pl330_request_channel(struct pl330_dmac *pl330)
1700{
1701 struct pl330_thread *thrd = NULL;
1702 int chans, i;
1703
1704 if (pl330->state == DYING)
1705 return NULL;
1706
1707 chans = pl330->pcfg.num_chan;
1708
1709 for (i = 0; i < chans; i++) {
1710 thrd = &pl330->channels[i];
1711 if ((thrd->free) && (!_manager_ns(thrd) ||
1712 _chan_ns(pl330, i))) {
1713 thrd->ev = _alloc_event(thrd);
1714 if (thrd->ev >= 0) {
1715 thrd->free = false;
1716 thrd->lstenq = 1;
1717 thrd->req[0].desc = NULL;
1718 thrd->req[1].desc = NULL;
1719 thrd->req_running = -1;
1720 break;
1721 }
1722 }
1723 thrd = NULL;
1724 }
1725
1726 return thrd;
1727}
1728
1729/* Release an event */
1730static inline void _free_event(struct pl330_thread *thrd, int ev)
1731{
1732 struct pl330_dmac *pl330 = thrd->dmac;
1733
1734 /* If the event is valid and was held by the thread */
1735 if (ev >= 0 && ev < pl330->pcfg.num_events
1736 && pl330->events[ev] == thrd->id)
1737 pl330->events[ev] = -1;
1738}
1739
1740static void pl330_release_channel(struct pl330_thread *thrd)
1741{
1742 struct pl330_dmac *pl330;
1743
1744 if (!thrd || thrd->free)
1745 return;
1746
1747 _stop(thrd);
1748
1749 dma_pl330_rqcb(thrd->req[1 - thrd->lstenq].desc, PL330_ERR_ABORT);
1750 dma_pl330_rqcb(thrd->req[thrd->lstenq].desc, PL330_ERR_ABORT);
1751
1752 pl330 = thrd->dmac;
1753
1754 _free_event(thrd, thrd->ev);
1755 thrd->free = true;
1756}
1757
1758/* Initialize the structure for PL330 configuration, that can be used
1759 * by the client driver the make best use of the DMAC
1760 */
1761static void read_dmac_config(struct pl330_dmac *pl330)
1762{
1763 void __iomem *regs = pl330->base;
1764 u32 val;
1765
1766 val = readl(regs + CRD) >> CRD_DATA_WIDTH_SHIFT;
1767 val &= CRD_DATA_WIDTH_MASK;
1768 pl330->pcfg.data_bus_width = 8 * (1 << val);
1769
1770 val = readl(regs + CRD) >> CRD_DATA_BUFF_SHIFT;
1771 val &= CRD_DATA_BUFF_MASK;
1772 pl330->pcfg.data_buf_dep = val + 1;
1773
1774 val = readl(regs + CR0) >> CR0_NUM_CHANS_SHIFT;
1775 val &= CR0_NUM_CHANS_MASK;
1776 val += 1;
1777 pl330->pcfg.num_chan = val;
1778
1779 val = readl(regs + CR0);
1780 if (val & CR0_PERIPH_REQ_SET) {
1781 val = (val >> CR0_NUM_PERIPH_SHIFT) & CR0_NUM_PERIPH_MASK;
1782 val += 1;
1783 pl330->pcfg.num_peri = val;
1784 pl330->pcfg.peri_ns = readl(regs + CR4);
1785 } else {
1786 pl330->pcfg.num_peri = 0;
1787 }
1788
1789 val = readl(regs + CR0);
1790 if (val & CR0_BOOT_MAN_NS)
1791 pl330->pcfg.mode |= DMAC_MODE_NS;
1792 else
1793 pl330->pcfg.mode &= ~DMAC_MODE_NS;
1794
1795 val = readl(regs + CR0) >> CR0_NUM_EVENTS_SHIFT;
1796 val &= CR0_NUM_EVENTS_MASK;
1797 val += 1;
1798 pl330->pcfg.num_events = val;
1799
1800 pl330->pcfg.irq_ns = readl(regs + CR3);
1801}
1802
1803static inline void _reset_thread(struct pl330_thread *thrd)
1804{
1805 struct pl330_dmac *pl330 = thrd->dmac;
1806
1807 thrd->req[0].mc_cpu = pl330->mcode_cpu
1808 + (thrd->id * pl330->mcbufsz);
1809 thrd->req[0].mc_bus = pl330->mcode_bus
1810 + (thrd->id * pl330->mcbufsz);
1811 thrd->req[0].desc = NULL;
1812
1813 thrd->req[1].mc_cpu = thrd->req[0].mc_cpu
1814 + pl330->mcbufsz / 2;
1815 thrd->req[1].mc_bus = thrd->req[0].mc_bus
1816 + pl330->mcbufsz / 2;
1817 thrd->req[1].desc = NULL;
1818
1819 thrd->req_running = -1;
1820}
1821
1822static int dmac_alloc_threads(struct pl330_dmac *pl330)
1823{
1824 int chans = pl330->pcfg.num_chan;
1825 struct pl330_thread *thrd;
1826 int i;
1827
1828 /* Allocate 1 Manager and 'chans' Channel threads */
1829 pl330->channels = kzalloc((1 + chans) * sizeof(*thrd),
1830 GFP_KERNEL);
1831 if (!pl330->channels)
1832 return -ENOMEM;
1833
1834 /* Init Channel threads */
1835 for (i = 0; i < chans; i++) {
1836 thrd = &pl330->channels[i];
1837 thrd->id = i;
1838 thrd->dmac = pl330;
1839 _reset_thread(thrd);
1840 thrd->free = true;
1841 }
1842
1843 /* MANAGER is indexed at the end */
1844 thrd = &pl330->channels[chans];
1845 thrd->id = chans;
1846 thrd->dmac = pl330;
1847 thrd->free = false;
1848 pl330->manager = thrd;
1849
1850 return 0;
1851}
1852
1853static int dmac_alloc_resources(struct pl330_dmac *pl330)
1854{
1855 int chans = pl330->pcfg.num_chan;
1856 int ret;
1857
1858 /*
1859 * Alloc MicroCode buffer for 'chans' Channel threads.
1860 * A channel's buffer offset is (Channel_Id * MCODE_BUFF_PERCHAN)
1861 */
1862 pl330->mcode_cpu = dma_alloc_coherent(pl330->ddma.dev,
1863 chans * pl330->mcbufsz,
1864 &pl330->mcode_bus, GFP_KERNEL);
1865 if (!pl330->mcode_cpu) {
1866 dev_err(pl330->ddma.dev, "%s:%d Can't allocate memory!\n",
1867 __func__, __LINE__);
1868 return -ENOMEM;
1869 }
1870
1871 ret = dmac_alloc_threads(pl330);
1872 if (ret) {
1873 dev_err(pl330->ddma.dev, "%s:%d Can't to create channels for DMAC!\n",
1874 __func__, __LINE__);
1875 dma_free_coherent(pl330->ddma.dev,
1876 chans * pl330->mcbufsz,
1877 pl330->mcode_cpu, pl330->mcode_bus);
1878 return ret;
1879 }
1880
1881 return 0;
1882}
1883
1884static int pl330_add(struct pl330_dmac *pl330)
1885{
1886 int i, ret;
1887
1888 /* Check if we can handle this DMAC */
1889 if ((pl330->pcfg.periph_id & 0xfffff) != PERIPH_ID_VAL) {
1890 dev_err(pl330->ddma.dev, "PERIPH_ID 0x%x !\n",
1891 pl330->pcfg.periph_id);
1892 return -EINVAL;
1893 }
1894
1895 /* Read the configuration of the DMAC */
1896 read_dmac_config(pl330);
1897
1898 if (pl330->pcfg.num_events == 0) {
1899 dev_err(pl330->ddma.dev, "%s:%d Can't work without events!\n",
1900 __func__, __LINE__);
1901 return -EINVAL;
1902 }
1903
1904 spin_lock_init(&pl330->lock);
1905
1906 INIT_LIST_HEAD(&pl330->req_done);
1907
1908 /* Use default MC buffer size if not provided */
1909 if (!pl330->mcbufsz)
1910 pl330->mcbufsz = MCODE_BUFF_PER_REQ * 2;
1911
1912 /* Mark all events as free */
1913 for (i = 0; i < pl330->pcfg.num_events; i++)
1914 pl330->events[i] = -1;
1915
1916 /* Allocate resources needed by the DMAC */
1917 ret = dmac_alloc_resources(pl330);
1918 if (ret) {
1919 dev_err(pl330->ddma.dev, "Unable to create channels for DMAC\n");
1920 return ret;
1921 }
1922
1923 tasklet_init(&pl330->tasks, pl330_dotask, (unsigned long) pl330);
1924
1925 pl330->state = INIT;
1926
1927 return 0;
1928}
1929
1930static int dmac_free_threads(struct pl330_dmac *pl330)
1931{
1932 struct pl330_thread *thrd;
1933 int i;
1934
1935 /* Release Channel threads */
1936 for (i = 0; i < pl330->pcfg.num_chan; i++) {
1937 thrd = &pl330->channels[i];
1938 pl330_release_channel(thrd);
1939 }
1940
1941 /* Free memory */
1942 kfree(pl330->channels);
1943
1944 return 0;
1945}
1946
1947static void pl330_del(struct pl330_dmac *pl330)
1948{
1949 pl330->state = UNINIT;
1950
1951 tasklet_kill(&pl330->tasks);
1952
1953 /* Free DMAC resources */
1954 dmac_free_threads(pl330);
1955
1956 dma_free_coherent(pl330->ddma.dev,
1957 pl330->pcfg.num_chan * pl330->mcbufsz, pl330->mcode_cpu,
1958 pl330->mcode_bus);
1959}
1960
1961/* forward declaration */
1962static struct amba_driver pl330_driver;
1963
1964static inline struct dma_pl330_chan *
1965to_pchan(struct dma_chan *ch)
1966{
1967 if (!ch)
1968 return NULL;
1969
1970 return container_of(ch, struct dma_pl330_chan, chan);
1971}
1972
1973static inline struct dma_pl330_desc *
1974to_desc(struct dma_async_tx_descriptor *tx)
1975{
1976 return container_of(tx, struct dma_pl330_desc, txd);
1977}
1978
1979static inline void fill_queue(struct dma_pl330_chan *pch)
1980{
1981 struct dma_pl330_desc *desc;
1982 int ret;
1983
1984 list_for_each_entry(desc, &pch->work_list, node) {
1985
1986 /* If already submitted */
1987 if (desc->status == BUSY)
1988 continue;
1989
1990 ret = pl330_submit_req(pch->thread, desc);
1991 if (!ret) {
1992 desc->status = BUSY;
1993 } else if (ret == -EAGAIN) {
1994 /* QFull or DMAC Dying */
1995 break;
1996 } else {
1997 /* Unacceptable request */
1998 desc->status = DONE;
1999 dev_err(pch->dmac->ddma.dev, "%s:%d Bad Desc(%d)\n",
2000 __func__, __LINE__, desc->txd.cookie);
2001 tasklet_schedule(&pch->task);
2002 }
2003 }
2004}
2005
2006static void pl330_tasklet(unsigned long data)
2007{
2008 struct dma_pl330_chan *pch = (struct dma_pl330_chan *)data;
2009 struct dma_pl330_desc *desc, *_dt;
2010 unsigned long flags;
2011 bool power_down = false;
2012
2013 spin_lock_irqsave(&pch->lock, flags);
2014
2015 /* Pick up ripe tomatoes */
2016 list_for_each_entry_safe(desc, _dt, &pch->work_list, node)
2017 if (desc->status == DONE) {
2018 if (!pch->cyclic)
2019 dma_cookie_complete(&desc->txd);
2020 list_move_tail(&desc->node, &pch->completed_list);
2021 }
2022
2023 /* Try to submit a req imm. next to the last completed cookie */
2024 fill_queue(pch);
2025
2026 if (list_empty(&pch->work_list)) {
2027 spin_lock(&pch->thread->dmac->lock);
2028 _stop(pch->thread);
2029 spin_unlock(&pch->thread->dmac->lock);
2030 power_down = true;
2031 pch->active = false;
2032 } else {
2033 /* Make sure the PL330 Channel thread is active */
2034 spin_lock(&pch->thread->dmac->lock);
2035 _start(pch->thread);
2036 spin_unlock(&pch->thread->dmac->lock);
2037 }
2038
2039 while (!list_empty(&pch->completed_list)) {
2040 struct dmaengine_desc_callback cb;
2041
2042 desc = list_first_entry(&pch->completed_list,
2043 struct dma_pl330_desc, node);
2044
2045 dmaengine_desc_get_callback(&desc->txd, &cb);
2046
2047 if (pch->cyclic) {
2048 desc->status = PREP;
2049 list_move_tail(&desc->node, &pch->work_list);
2050 if (power_down) {
2051 pch->active = true;
2052 spin_lock(&pch->thread->dmac->lock);
2053 _start(pch->thread);
2054 spin_unlock(&pch->thread->dmac->lock);
2055 power_down = false;
2056 }
2057 } else {
2058 desc->status = FREE;
2059 list_move_tail(&desc->node, &pch->dmac->desc_pool);
2060 }
2061
2062 dma_descriptor_unmap(&desc->txd);
2063
2064 if (dmaengine_desc_callback_valid(&cb)) {
2065 spin_unlock_irqrestore(&pch->lock, flags);
2066 dmaengine_desc_callback_invoke(&cb, NULL);
2067 spin_lock_irqsave(&pch->lock, flags);
2068 }
2069 }
2070 spin_unlock_irqrestore(&pch->lock, flags);
2071
2072 /* If work list empty, power down */
2073 if (power_down) {
2074 pm_runtime_mark_last_busy(pch->dmac->ddma.dev);
2075 pm_runtime_put_autosuspend(pch->dmac->ddma.dev);
2076 }
2077}
2078
2079bool pl330_filter(struct dma_chan *chan, void *param)
2080{
2081 u8 *peri_id;
2082
2083 if (chan->device->dev->driver != &pl330_driver.drv)
2084 return false;
2085
2086 peri_id = chan->private;
2087 return *peri_id == (unsigned long)param;
2088}
2089EXPORT_SYMBOL(pl330_filter);
2090
2091static struct dma_chan *of_dma_pl330_xlate(struct of_phandle_args *dma_spec,
2092 struct of_dma *ofdma)
2093{
2094 int count = dma_spec->args_count;
2095 struct pl330_dmac *pl330 = ofdma->of_dma_data;
2096 unsigned int chan_id;
2097
2098 if (!pl330)
2099 return NULL;
2100
2101 if (count != 1)
2102 return NULL;
2103
2104 chan_id = dma_spec->args[0];
2105 if (chan_id >= pl330->num_peripherals)
2106 return NULL;
2107
2108 return dma_get_slave_channel(&pl330->peripherals[chan_id].chan);
2109}
2110
2111static int pl330_alloc_chan_resources(struct dma_chan *chan)
2112{
2113 struct dma_pl330_chan *pch = to_pchan(chan);
2114 struct pl330_dmac *pl330 = pch->dmac;
2115 unsigned long flags;
2116
2117 spin_lock_irqsave(&pl330->lock, flags);
2118
2119 dma_cookie_init(chan);
2120 pch->cyclic = false;
2121
2122 pch->thread = pl330_request_channel(pl330);
2123 if (!pch->thread) {
2124 spin_unlock_irqrestore(&pl330->lock, flags);
2125 return -ENOMEM;
2126 }
2127
2128 tasklet_init(&pch->task, pl330_tasklet, (unsigned long) pch);
2129
2130 spin_unlock_irqrestore(&pl330->lock, flags);
2131
2132 return 1;
2133}
2134
2135static int pl330_config(struct dma_chan *chan,
2136 struct dma_slave_config *slave_config)
2137{
2138 struct dma_pl330_chan *pch = to_pchan(chan);
2139
2140 if (slave_config->direction == DMA_MEM_TO_DEV) {
2141 if (slave_config->dst_addr)
2142 pch->fifo_addr = slave_config->dst_addr;
2143 if (slave_config->dst_addr_width)
2144 pch->burst_sz = __ffs(slave_config->dst_addr_width);
2145 if (slave_config->dst_maxburst)
2146 pch->burst_len = slave_config->dst_maxburst;
2147 } else if (slave_config->direction == DMA_DEV_TO_MEM) {
2148 if (slave_config->src_addr)
2149 pch->fifo_addr = slave_config->src_addr;
2150 if (slave_config->src_addr_width)
2151 pch->burst_sz = __ffs(slave_config->src_addr_width);
2152 if (slave_config->src_maxburst)
2153 pch->burst_len = slave_config->src_maxburst;
2154 }
2155
2156 return 0;
2157}
2158
2159static int pl330_terminate_all(struct dma_chan *chan)
2160{
2161 struct dma_pl330_chan *pch = to_pchan(chan);
2162 struct dma_pl330_desc *desc;
2163 unsigned long flags;
2164 struct pl330_dmac *pl330 = pch->dmac;
2165 LIST_HEAD(list);
2166 bool power_down = false;
2167
2168 pm_runtime_get_sync(pl330->ddma.dev);
2169 spin_lock_irqsave(&pch->lock, flags);
2170 spin_lock(&pl330->lock);
2171 _stop(pch->thread);
2172 spin_unlock(&pl330->lock);
2173
2174 pch->thread->req[0].desc = NULL;
2175 pch->thread->req[1].desc = NULL;
2176 pch->thread->req_running = -1;
2177 power_down = pch->active;
2178 pch->active = false;
2179
2180 /* Mark all desc done */
2181 list_for_each_entry(desc, &pch->submitted_list, node) {
2182 desc->status = FREE;
2183 dma_cookie_complete(&desc->txd);
2184 }
2185
2186 list_for_each_entry(desc, &pch->work_list , node) {
2187 desc->status = FREE;
2188 dma_cookie_complete(&desc->txd);
2189 }
2190
2191 list_splice_tail_init(&pch->submitted_list, &pl330->desc_pool);
2192 list_splice_tail_init(&pch->work_list, &pl330->desc_pool);
2193 list_splice_tail_init(&pch->completed_list, &pl330->desc_pool);
2194 spin_unlock_irqrestore(&pch->lock, flags);
2195 pm_runtime_mark_last_busy(pl330->ddma.dev);
2196 if (power_down)
2197 pm_runtime_put_autosuspend(pl330->ddma.dev);
2198 pm_runtime_put_autosuspend(pl330->ddma.dev);
2199
2200 return 0;
2201}
2202
2203/*
2204 * We don't support DMA_RESUME command because of hardware
2205 * limitations, so after pausing the channel we cannot restore
2206 * it to active state. We have to terminate channel and setup
2207 * DMA transfer again. This pause feature was implemented to
2208 * allow safely read residue before channel termination.
2209 */
2210static int pl330_pause(struct dma_chan *chan)
2211{
2212 struct dma_pl330_chan *pch = to_pchan(chan);
2213 struct pl330_dmac *pl330 = pch->dmac;
2214 unsigned long flags;
2215
2216 pm_runtime_get_sync(pl330->ddma.dev);
2217 spin_lock_irqsave(&pch->lock, flags);
2218
2219 spin_lock(&pl330->lock);
2220 _stop(pch->thread);
2221 spin_unlock(&pl330->lock);
2222
2223 spin_unlock_irqrestore(&pch->lock, flags);
2224 pm_runtime_mark_last_busy(pl330->ddma.dev);
2225 pm_runtime_put_autosuspend(pl330->ddma.dev);
2226
2227 return 0;
2228}
2229
2230static void pl330_free_chan_resources(struct dma_chan *chan)
2231{
2232 struct dma_pl330_chan *pch = to_pchan(chan);
2233 struct pl330_dmac *pl330 = pch->dmac;
2234 unsigned long flags;
2235
2236 tasklet_kill(&pch->task);
2237
2238 pm_runtime_get_sync(pch->dmac->ddma.dev);
2239 spin_lock_irqsave(&pl330->lock, flags);
2240
2241 pl330_release_channel(pch->thread);
2242 pch->thread = NULL;
2243
2244 if (pch->cyclic)
2245 list_splice_tail_init(&pch->work_list, &pch->dmac->desc_pool);
2246
2247 spin_unlock_irqrestore(&pl330->lock, flags);
2248 pm_runtime_mark_last_busy(pch->dmac->ddma.dev);
2249 pm_runtime_put_autosuspend(pch->dmac->ddma.dev);
2250}
2251
2252static int pl330_get_current_xferred_count(struct dma_pl330_chan *pch,
2253 struct dma_pl330_desc *desc)
2254{
2255 struct pl330_thread *thrd = pch->thread;
2256 struct pl330_dmac *pl330 = pch->dmac;
2257 void __iomem *regs = thrd->dmac->base;
2258 u32 val, addr;
2259
2260 pm_runtime_get_sync(pl330->ddma.dev);
2261 val = addr = 0;
2262 if (desc->rqcfg.src_inc) {
2263 val = readl(regs + SA(thrd->id));
2264 addr = desc->px.src_addr;
2265 } else {
2266 val = readl(regs + DA(thrd->id));
2267 addr = desc->px.dst_addr;
2268 }
2269 pm_runtime_mark_last_busy(pch->dmac->ddma.dev);
2270 pm_runtime_put_autosuspend(pl330->ddma.dev);
2271
2272 /* If DMAMOV hasn't finished yet, SAR/DAR can be zero */
2273 if (!val)
2274 return 0;
2275
2276 return val - addr;
2277}
2278
2279static enum dma_status
2280pl330_tx_status(struct dma_chan *chan, dma_cookie_t cookie,
2281 struct dma_tx_state *txstate)
2282{
2283 enum dma_status ret;
2284 unsigned long flags;
2285 struct dma_pl330_desc *desc, *running = NULL, *last_enq = NULL;
2286 struct dma_pl330_chan *pch = to_pchan(chan);
2287 unsigned int transferred, residual = 0;
2288
2289 ret = dma_cookie_status(chan, cookie, txstate);
2290
2291 if (!txstate)
2292 return ret;
2293
2294 if (ret == DMA_COMPLETE)
2295 goto out;
2296
2297 spin_lock_irqsave(&pch->lock, flags);
2298 spin_lock(&pch->thread->dmac->lock);
2299
2300 if (pch->thread->req_running != -1)
2301 running = pch->thread->req[pch->thread->req_running].desc;
2302
2303 last_enq = pch->thread->req[pch->thread->lstenq].desc;
2304
2305 /* Check in pending list */
2306 list_for_each_entry(desc, &pch->work_list, node) {
2307 if (desc->status == DONE)
2308 transferred = desc->bytes_requested;
2309 else if (running && desc == running)
2310 transferred =
2311 pl330_get_current_xferred_count(pch, desc);
2312 else if (desc->status == BUSY)
2313 /*
2314 * Busy but not running means either just enqueued,
2315 * or finished and not yet marked done
2316 */
2317 if (desc == last_enq)
2318 transferred = 0;
2319 else
2320 transferred = desc->bytes_requested;
2321 else
2322 transferred = 0;
2323 residual += desc->bytes_requested - transferred;
2324 if (desc->txd.cookie == cookie) {
2325 switch (desc->status) {
2326 case DONE:
2327 ret = DMA_COMPLETE;
2328 break;
2329 case PREP:
2330 case BUSY:
2331 ret = DMA_IN_PROGRESS;
2332 break;
2333 default:
2334 WARN_ON(1);
2335 }
2336 break;
2337 }
2338 if (desc->last)
2339 residual = 0;
2340 }
2341 spin_unlock(&pch->thread->dmac->lock);
2342 spin_unlock_irqrestore(&pch->lock, flags);
2343
2344out:
2345 dma_set_residue(txstate, residual);
2346
2347 return ret;
2348}
2349
2350static void pl330_issue_pending(struct dma_chan *chan)
2351{
2352 struct dma_pl330_chan *pch = to_pchan(chan);
2353 unsigned long flags;
2354
2355 spin_lock_irqsave(&pch->lock, flags);
2356 if (list_empty(&pch->work_list)) {
2357 /*
2358 * Warn on nothing pending. Empty submitted_list may
2359 * break our pm_runtime usage counter as it is
2360 * updated on work_list emptiness status.
2361 */
2362 WARN_ON(list_empty(&pch->submitted_list));
2363 pch->active = true;
2364 pm_runtime_get_sync(pch->dmac->ddma.dev);
2365 }
2366 list_splice_tail_init(&pch->submitted_list, &pch->work_list);
2367 spin_unlock_irqrestore(&pch->lock, flags);
2368
2369 pl330_tasklet((unsigned long)pch);
2370}
2371
2372/*
2373 * We returned the last one of the circular list of descriptor(s)
2374 * from prep_xxx, so the argument to submit corresponds to the last
2375 * descriptor of the list.
2376 */
2377static dma_cookie_t pl330_tx_submit(struct dma_async_tx_descriptor *tx)
2378{
2379 struct dma_pl330_desc *desc, *last = to_desc(tx);
2380 struct dma_pl330_chan *pch = to_pchan(tx->chan);
2381 dma_cookie_t cookie;
2382 unsigned long flags;
2383
2384 spin_lock_irqsave(&pch->lock, flags);
2385
2386 /* Assign cookies to all nodes */
2387 while (!list_empty(&last->node)) {
2388 desc = list_entry(last->node.next, struct dma_pl330_desc, node);
2389 if (pch->cyclic) {
2390 desc->txd.callback = last->txd.callback;
2391 desc->txd.callback_param = last->txd.callback_param;
2392 }
2393 desc->last = false;
2394
2395 dma_cookie_assign(&desc->txd);
2396
2397 list_move_tail(&desc->node, &pch->submitted_list);
2398 }
2399
2400 last->last = true;
2401 cookie = dma_cookie_assign(&last->txd);
2402 list_add_tail(&last->node, &pch->submitted_list);
2403 spin_unlock_irqrestore(&pch->lock, flags);
2404
2405 return cookie;
2406}
2407
2408static inline void _init_desc(struct dma_pl330_desc *desc)
2409{
2410 desc->rqcfg.swap = SWAP_NO;
2411 desc->rqcfg.scctl = CCTRL0;
2412 desc->rqcfg.dcctl = CCTRL0;
2413 desc->txd.tx_submit = pl330_tx_submit;
2414
2415 INIT_LIST_HEAD(&desc->node);
2416}
2417
2418/* Returns the number of descriptors added to the DMAC pool */
2419static int add_desc(struct pl330_dmac *pl330, gfp_t flg, int count)
2420{
2421 struct dma_pl330_desc *desc;
2422 unsigned long flags;
2423 int i;
2424
2425 desc = kcalloc(count, sizeof(*desc), flg);
2426 if (!desc)
2427 return 0;
2428
2429 spin_lock_irqsave(&pl330->pool_lock, flags);
2430
2431 for (i = 0; i < count; i++) {
2432 _init_desc(&desc[i]);
2433 list_add_tail(&desc[i].node, &pl330->desc_pool);
2434 }
2435
2436 spin_unlock_irqrestore(&pl330->pool_lock, flags);
2437
2438 return count;
2439}
2440
2441static struct dma_pl330_desc *pluck_desc(struct pl330_dmac *pl330)
2442{
2443 struct dma_pl330_desc *desc = NULL;
2444 unsigned long flags;
2445
2446 spin_lock_irqsave(&pl330->pool_lock, flags);
2447
2448 if (!list_empty(&pl330->desc_pool)) {
2449 desc = list_entry(pl330->desc_pool.next,
2450 struct dma_pl330_desc, node);
2451
2452 list_del_init(&desc->node);
2453
2454 desc->status = PREP;
2455 desc->txd.callback = NULL;
2456 }
2457
2458 spin_unlock_irqrestore(&pl330->pool_lock, flags);
2459
2460 return desc;
2461}
2462
2463static struct dma_pl330_desc *pl330_get_desc(struct dma_pl330_chan *pch)
2464{
2465 struct pl330_dmac *pl330 = pch->dmac;
2466 u8 *peri_id = pch->chan.private;
2467 struct dma_pl330_desc *desc;
2468
2469 /* Pluck one desc from the pool of DMAC */
2470 desc = pluck_desc(pl330);
2471
2472 /* If the DMAC pool is empty, alloc new */
2473 if (!desc) {
2474 if (!add_desc(pl330, GFP_ATOMIC, 1))
2475 return NULL;
2476
2477 /* Try again */
2478 desc = pluck_desc(pl330);
2479 if (!desc) {
2480 dev_err(pch->dmac->ddma.dev,
2481 "%s:%d ALERT!\n", __func__, __LINE__);
2482 return NULL;
2483 }
2484 }
2485
2486 /* Initialize the descriptor */
2487 desc->pchan = pch;
2488 desc->txd.cookie = 0;
2489 async_tx_ack(&desc->txd);
2490
2491 desc->peri = peri_id ? pch->chan.chan_id : 0;
2492 desc->rqcfg.pcfg = &pch->dmac->pcfg;
2493
2494 dma_async_tx_descriptor_init(&desc->txd, &pch->chan);
2495
2496 return desc;
2497}
2498
2499static inline void fill_px(struct pl330_xfer *px,
2500 dma_addr_t dst, dma_addr_t src, size_t len)
2501{
2502 px->bytes = len;
2503 px->dst_addr = dst;
2504 px->src_addr = src;
2505}
2506
2507static struct dma_pl330_desc *
2508__pl330_prep_dma_memcpy(struct dma_pl330_chan *pch, dma_addr_t dst,
2509 dma_addr_t src, size_t len)
2510{
2511 struct dma_pl330_desc *desc = pl330_get_desc(pch);
2512
2513 if (!desc) {
2514 dev_err(pch->dmac->ddma.dev, "%s:%d Unable to fetch desc\n",
2515 __func__, __LINE__);
2516 return NULL;
2517 }
2518
2519 /*
2520 * Ideally we should lookout for reqs bigger than
2521 * those that can be programmed with 256 bytes of
2522 * MC buffer, but considering a req size is seldom
2523 * going to be word-unaligned and more than 200MB,
2524 * we take it easy.
2525 * Also, should the limit is reached we'd rather
2526 * have the platform increase MC buffer size than
2527 * complicating this API driver.
2528 */
2529 fill_px(&desc->px, dst, src, len);
2530
2531 return desc;
2532}
2533
2534/* Call after fixing burst size */
2535static inline int get_burst_len(struct dma_pl330_desc *desc, size_t len)
2536{
2537 struct dma_pl330_chan *pch = desc->pchan;
2538 struct pl330_dmac *pl330 = pch->dmac;
2539 int burst_len;
2540
2541 burst_len = pl330->pcfg.data_bus_width / 8;
2542 burst_len *= pl330->pcfg.data_buf_dep / pl330->pcfg.num_chan;
2543 burst_len >>= desc->rqcfg.brst_size;
2544
2545 /* src/dst_burst_len can't be more than 16 */
2546 if (burst_len > 16)
2547 burst_len = 16;
2548
2549 while (burst_len > 1) {
2550 if (!(len % (burst_len << desc->rqcfg.brst_size)))
2551 break;
2552 burst_len--;
2553 }
2554
2555 return burst_len;
2556}
2557
2558static struct dma_async_tx_descriptor *pl330_prep_dma_cyclic(
2559 struct dma_chan *chan, dma_addr_t dma_addr, size_t len,
2560 size_t period_len, enum dma_transfer_direction direction,
2561 unsigned long flags)
2562{
2563 struct dma_pl330_desc *desc = NULL, *first = NULL;
2564 struct dma_pl330_chan *pch = to_pchan(chan);
2565 struct pl330_dmac *pl330 = pch->dmac;
2566 unsigned int i;
2567 dma_addr_t dst;
2568 dma_addr_t src;
2569
2570 if (len % period_len != 0)
2571 return NULL;
2572
2573 if (!is_slave_direction(direction)) {
2574 dev_err(pch->dmac->ddma.dev, "%s:%d Invalid dma direction\n",
2575 __func__, __LINE__);
2576 return NULL;
2577 }
2578
2579 for (i = 0; i < len / period_len; i++) {
2580 desc = pl330_get_desc(pch);
2581 if (!desc) {
2582 dev_err(pch->dmac->ddma.dev, "%s:%d Unable to fetch desc\n",
2583 __func__, __LINE__);
2584
2585 if (!first)
2586 return NULL;
2587
2588 spin_lock_irqsave(&pl330->pool_lock, flags);
2589
2590 while (!list_empty(&first->node)) {
2591 desc = list_entry(first->node.next,
2592 struct dma_pl330_desc, node);
2593 list_move_tail(&desc->node, &pl330->desc_pool);
2594 }
2595
2596 list_move_tail(&first->node, &pl330->desc_pool);
2597
2598 spin_unlock_irqrestore(&pl330->pool_lock, flags);
2599
2600 return NULL;
2601 }
2602
2603 switch (direction) {
2604 case DMA_MEM_TO_DEV:
2605 desc->rqcfg.src_inc = 1;
2606 desc->rqcfg.dst_inc = 0;
2607 src = dma_addr;
2608 dst = pch->fifo_addr;
2609 break;
2610 case DMA_DEV_TO_MEM:
2611 desc->rqcfg.src_inc = 0;
2612 desc->rqcfg.dst_inc = 1;
2613 src = pch->fifo_addr;
2614 dst = dma_addr;
2615 break;
2616 default:
2617 break;
2618 }
2619
2620 desc->rqtype = direction;
2621 desc->rqcfg.brst_size = pch->burst_sz;
2622 desc->rqcfg.brst_len = 1;
2623 desc->bytes_requested = period_len;
2624 fill_px(&desc->px, dst, src, period_len);
2625
2626 if (!first)
2627 first = desc;
2628 else
2629 list_add_tail(&desc->node, &first->node);
2630
2631 dma_addr += period_len;
2632 }
2633
2634 if (!desc)
2635 return NULL;
2636
2637 pch->cyclic = true;
2638 desc->txd.flags = flags;
2639
2640 return &desc->txd;
2641}
2642
2643static struct dma_async_tx_descriptor *
2644pl330_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dst,
2645 dma_addr_t src, size_t len, unsigned long flags)
2646{
2647 struct dma_pl330_desc *desc;
2648 struct dma_pl330_chan *pch = to_pchan(chan);
2649 struct pl330_dmac *pl330;
2650 int burst;
2651
2652 if (unlikely(!pch || !len))
2653 return NULL;
2654
2655 pl330 = pch->dmac;
2656
2657 desc = __pl330_prep_dma_memcpy(pch, dst, src, len);
2658 if (!desc)
2659 return NULL;
2660
2661 desc->rqcfg.src_inc = 1;
2662 desc->rqcfg.dst_inc = 1;
2663 desc->rqtype = DMA_MEM_TO_MEM;
2664
2665 /* Select max possible burst size */
2666 burst = pl330->pcfg.data_bus_width / 8;
2667
2668 /*
2669 * Make sure we use a burst size that aligns with all the memcpy
2670 * parameters because our DMA programming algorithm doesn't cope with
2671 * transfers which straddle an entry in the DMA device's MFIFO.
2672 */
2673 while ((src | dst | len) & (burst - 1))
2674 burst /= 2;
2675
2676 desc->rqcfg.brst_size = 0;
2677 while (burst != (1 << desc->rqcfg.brst_size))
2678 desc->rqcfg.brst_size++;
2679
2680 /*
2681 * If burst size is smaller than bus width then make sure we only
2682 * transfer one at a time to avoid a burst stradling an MFIFO entry.
2683 */
2684 if (desc->rqcfg.brst_size * 8 < pl330->pcfg.data_bus_width)
2685 desc->rqcfg.brst_len = 1;
2686
2687 desc->rqcfg.brst_len = get_burst_len(desc, len);
2688 desc->bytes_requested = len;
2689
2690 desc->txd.flags = flags;
2691
2692 return &desc->txd;
2693}
2694
2695static void __pl330_giveback_desc(struct pl330_dmac *pl330,
2696 struct dma_pl330_desc *first)
2697{
2698 unsigned long flags;
2699 struct dma_pl330_desc *desc;
2700
2701 if (!first)
2702 return;
2703
2704 spin_lock_irqsave(&pl330->pool_lock, flags);
2705
2706 while (!list_empty(&first->node)) {
2707 desc = list_entry(first->node.next,
2708 struct dma_pl330_desc, node);
2709 list_move_tail(&desc->node, &pl330->desc_pool);
2710 }
2711
2712 list_move_tail(&first->node, &pl330->desc_pool);
2713
2714 spin_unlock_irqrestore(&pl330->pool_lock, flags);
2715}
2716
2717static struct dma_async_tx_descriptor *
2718pl330_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
2719 unsigned int sg_len, enum dma_transfer_direction direction,
2720 unsigned long flg, void *context)
2721{
2722 struct dma_pl330_desc *first, *desc = NULL;
2723 struct dma_pl330_chan *pch = to_pchan(chan);
2724 struct scatterlist *sg;
2725 int i;
2726 dma_addr_t addr;
2727
2728 if (unlikely(!pch || !sgl || !sg_len))
2729 return NULL;
2730
2731 addr = pch->fifo_addr;
2732
2733 first = NULL;
2734
2735 for_each_sg(sgl, sg, sg_len, i) {
2736
2737 desc = pl330_get_desc(pch);
2738 if (!desc) {
2739 struct pl330_dmac *pl330 = pch->dmac;
2740
2741 dev_err(pch->dmac->ddma.dev,
2742 "%s:%d Unable to fetch desc\n",
2743 __func__, __LINE__);
2744 __pl330_giveback_desc(pl330, first);
2745
2746 return NULL;
2747 }
2748
2749 if (!first)
2750 first = desc;
2751 else
2752 list_add_tail(&desc->node, &first->node);
2753
2754 if (direction == DMA_MEM_TO_DEV) {
2755 desc->rqcfg.src_inc = 1;
2756 desc->rqcfg.dst_inc = 0;
2757 fill_px(&desc->px,
2758 addr, sg_dma_address(sg), sg_dma_len(sg));
2759 } else {
2760 desc->rqcfg.src_inc = 0;
2761 desc->rqcfg.dst_inc = 1;
2762 fill_px(&desc->px,
2763 sg_dma_address(sg), addr, sg_dma_len(sg));
2764 }
2765
2766 desc->rqcfg.brst_size = pch->burst_sz;
2767 desc->rqcfg.brst_len = 1;
2768 desc->rqtype = direction;
2769 desc->bytes_requested = sg_dma_len(sg);
2770 }
2771
2772 /* Return the last desc in the chain */
2773 desc->txd.flags = flg;
2774 return &desc->txd;
2775}
2776
2777static irqreturn_t pl330_irq_handler(int irq, void *data)
2778{
2779 if (pl330_update(data))
2780 return IRQ_HANDLED;
2781 else
2782 return IRQ_NONE;
2783}
2784
2785#define PL330_DMA_BUSWIDTHS \
2786 BIT(DMA_SLAVE_BUSWIDTH_UNDEFINED) | \
2787 BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) | \
2788 BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) | \
2789 BIT(DMA_SLAVE_BUSWIDTH_4_BYTES) | \
2790 BIT(DMA_SLAVE_BUSWIDTH_8_BYTES)
2791
2792/*
2793 * Runtime PM callbacks are provided by amba/bus.c driver.
2794 *
2795 * It is assumed here that IRQ safe runtime PM is chosen in probe and amba
2796 * bus driver will only disable/enable the clock in runtime PM callbacks.
2797 */
2798static int __maybe_unused pl330_suspend(struct device *dev)
2799{
2800 struct amba_device *pcdev = to_amba_device(dev);
2801
2802 pm_runtime_disable(dev);
2803
2804 if (!pm_runtime_status_suspended(dev)) {
2805 /* amba did not disable the clock */
2806 amba_pclk_disable(pcdev);
2807 }
2808 amba_pclk_unprepare(pcdev);
2809
2810 return 0;
2811}
2812
2813static int __maybe_unused pl330_resume(struct device *dev)
2814{
2815 struct amba_device *pcdev = to_amba_device(dev);
2816 int ret;
2817
2818 ret = amba_pclk_prepare(pcdev);
2819 if (ret)
2820 return ret;
2821
2822 if (!pm_runtime_status_suspended(dev))
2823 ret = amba_pclk_enable(pcdev);
2824
2825 pm_runtime_enable(dev);
2826
2827 return ret;
2828}
2829
2830static SIMPLE_DEV_PM_OPS(pl330_pm, pl330_suspend, pl330_resume);
2831
2832static int
2833pl330_probe(struct amba_device *adev, const struct amba_id *id)
2834{
2835 struct dma_pl330_platdata *pdat;
2836 struct pl330_config *pcfg;
2837 struct pl330_dmac *pl330;
2838 struct dma_pl330_chan *pch, *_p;
2839 struct dma_device *pd;
2840 struct resource *res;
2841 int i, ret, irq;
2842 int num_chan;
2843 struct device_node *np = adev->dev.of_node;
2844
2845 pdat = dev_get_platdata(&adev->dev);
2846
2847 ret = dma_set_mask_and_coherent(&adev->dev, DMA_BIT_MASK(32));
2848 if (ret)
2849 return ret;
2850
2851 /* Allocate a new DMAC and its Channels */
2852 pl330 = devm_kzalloc(&adev->dev, sizeof(*pl330), GFP_KERNEL);
2853 if (!pl330)
2854 return -ENOMEM;
2855
2856 pd = &pl330->ddma;
2857 pd->dev = &adev->dev;
2858
2859 pl330->mcbufsz = pdat ? pdat->mcbuf_sz : 0;
2860
2861 /* get quirk */
2862 for (i = 0; i < ARRAY_SIZE(of_quirks); i++)
2863 if (of_property_read_bool(np, of_quirks[i].quirk))
2864 pl330->quirks |= of_quirks[i].id;
2865
2866 res = &adev->res;
2867 pl330->base = devm_ioremap_resource(&adev->dev, res);
2868 if (IS_ERR(pl330->base))
2869 return PTR_ERR(pl330->base);
2870
2871 amba_set_drvdata(adev, pl330);
2872
2873 for (i = 0; i < AMBA_NR_IRQS; i++) {
2874 irq = adev->irq[i];
2875 if (irq) {
2876 ret = devm_request_irq(&adev->dev, irq,
2877 pl330_irq_handler, 0,
2878 dev_name(&adev->dev), pl330);
2879 if (ret)
2880 return ret;
2881 } else {
2882 break;
2883 }
2884 }
2885
2886 pcfg = &pl330->pcfg;
2887
2888 pcfg->periph_id = adev->periphid;
2889 ret = pl330_add(pl330);
2890 if (ret)
2891 return ret;
2892
2893 INIT_LIST_HEAD(&pl330->desc_pool);
2894 spin_lock_init(&pl330->pool_lock);
2895
2896 /* Create a descriptor pool of default size */
2897 if (!add_desc(pl330, GFP_KERNEL, NR_DEFAULT_DESC))
2898 dev_warn(&adev->dev, "unable to allocate desc\n");
2899
2900 INIT_LIST_HEAD(&pd->channels);
2901
2902 /* Initialize channel parameters */
2903 if (pdat)
2904 num_chan = max_t(int, pdat->nr_valid_peri, pcfg->num_chan);
2905 else
2906 num_chan = max_t(int, pcfg->num_peri, pcfg->num_chan);
2907
2908 pl330->num_peripherals = num_chan;
2909
2910 pl330->peripherals = kzalloc(num_chan * sizeof(*pch), GFP_KERNEL);
2911 if (!pl330->peripherals) {
2912 ret = -ENOMEM;
2913 goto probe_err2;
2914 }
2915
2916 for (i = 0; i < num_chan; i++) {
2917 pch = &pl330->peripherals[i];
2918 if (!adev->dev.of_node)
2919 pch->chan.private = pdat ? &pdat->peri_id[i] : NULL;
2920 else
2921 pch->chan.private = adev->dev.of_node;
2922
2923 INIT_LIST_HEAD(&pch->submitted_list);
2924 INIT_LIST_HEAD(&pch->work_list);
2925 INIT_LIST_HEAD(&pch->completed_list);
2926 spin_lock_init(&pch->lock);
2927 pch->thread = NULL;
2928 pch->chan.device = pd;
2929 pch->dmac = pl330;
2930
2931 /* Add the channel to the DMAC list */
2932 list_add_tail(&pch->chan.device_node, &pd->channels);
2933 }
2934
2935 if (pdat) {
2936 pd->cap_mask = pdat->cap_mask;
2937 } else {
2938 dma_cap_set(DMA_MEMCPY, pd->cap_mask);
2939 if (pcfg->num_peri) {
2940 dma_cap_set(DMA_SLAVE, pd->cap_mask);
2941 dma_cap_set(DMA_CYCLIC, pd->cap_mask);
2942 dma_cap_set(DMA_PRIVATE, pd->cap_mask);
2943 }
2944 }
2945
2946 pd->device_alloc_chan_resources = pl330_alloc_chan_resources;
2947 pd->device_free_chan_resources = pl330_free_chan_resources;
2948 pd->device_prep_dma_memcpy = pl330_prep_dma_memcpy;
2949 pd->device_prep_dma_cyclic = pl330_prep_dma_cyclic;
2950 pd->device_tx_status = pl330_tx_status;
2951 pd->device_prep_slave_sg = pl330_prep_slave_sg;
2952 pd->device_config = pl330_config;
2953 pd->device_pause = pl330_pause;
2954 pd->device_terminate_all = pl330_terminate_all;
2955 pd->device_issue_pending = pl330_issue_pending;
2956 pd->src_addr_widths = PL330_DMA_BUSWIDTHS;
2957 pd->dst_addr_widths = PL330_DMA_BUSWIDTHS;
2958 pd->directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
2959 pd->residue_granularity = DMA_RESIDUE_GRANULARITY_SEGMENT;
2960 pd->max_burst = ((pl330->quirks & PL330_QUIRK_BROKEN_NO_FLUSHP) ?
2961 1 : PL330_MAX_BURST);
2962
2963 ret = dma_async_device_register(pd);
2964 if (ret) {
2965 dev_err(&adev->dev, "unable to register DMAC\n");
2966 goto probe_err3;
2967 }
2968
2969 if (adev->dev.of_node) {
2970 ret = of_dma_controller_register(adev->dev.of_node,
2971 of_dma_pl330_xlate, pl330);
2972 if (ret) {
2973 dev_err(&adev->dev,
2974 "unable to register DMA to the generic DT DMA helpers\n");
2975 }
2976 }
2977
2978 adev->dev.dma_parms = &pl330->dma_parms;
2979
2980 /*
2981 * This is the limit for transfers with a buswidth of 1, larger
2982 * buswidths will have larger limits.
2983 */
2984 ret = dma_set_max_seg_size(&adev->dev, 1900800);
2985 if (ret)
2986 dev_err(&adev->dev, "unable to set the seg size\n");
2987
2988
2989 dev_info(&adev->dev,
2990 "Loaded driver for PL330 DMAC-%x\n", adev->periphid);
2991 dev_info(&adev->dev,
2992 "\tDBUFF-%ux%ubytes Num_Chans-%u Num_Peri-%u Num_Events-%u\n",
2993 pcfg->data_buf_dep, pcfg->data_bus_width / 8, pcfg->num_chan,
2994 pcfg->num_peri, pcfg->num_events);
2995
2996 pm_runtime_irq_safe(&adev->dev);
2997 pm_runtime_use_autosuspend(&adev->dev);
2998 pm_runtime_set_autosuspend_delay(&adev->dev, PL330_AUTOSUSPEND_DELAY);
2999 pm_runtime_mark_last_busy(&adev->dev);
3000 pm_runtime_put_autosuspend(&adev->dev);
3001
3002 return 0;
3003probe_err3:
3004 /* Idle the DMAC */
3005 list_for_each_entry_safe(pch, _p, &pl330->ddma.channels,
3006 chan.device_node) {
3007
3008 /* Remove the channel */
3009 list_del(&pch->chan.device_node);
3010
3011 /* Flush the channel */
3012 if (pch->thread) {
3013 pl330_terminate_all(&pch->chan);
3014 pl330_free_chan_resources(&pch->chan);
3015 }
3016 }
3017probe_err2:
3018 pl330_del(pl330);
3019
3020 return ret;
3021}
3022
3023static int pl330_remove(struct amba_device *adev)
3024{
3025 struct pl330_dmac *pl330 = amba_get_drvdata(adev);
3026 struct dma_pl330_chan *pch, *_p;
3027 int i, irq;
3028
3029 pm_runtime_get_noresume(pl330->ddma.dev);
3030
3031 if (adev->dev.of_node)
3032 of_dma_controller_free(adev->dev.of_node);
3033
3034 for (i = 0; i < AMBA_NR_IRQS; i++) {
3035 irq = adev->irq[i];
3036 devm_free_irq(&adev->dev, irq, pl330);
3037 }
3038
3039 dma_async_device_unregister(&pl330->ddma);
3040
3041 /* Idle the DMAC */
3042 list_for_each_entry_safe(pch, _p, &pl330->ddma.channels,
3043 chan.device_node) {
3044
3045 /* Remove the channel */
3046 list_del(&pch->chan.device_node);
3047
3048 /* Flush the channel */
3049 if (pch->thread) {
3050 pl330_terminate_all(&pch->chan);
3051 pl330_free_chan_resources(&pch->chan);
3052 }
3053 }
3054
3055 pl330_del(pl330);
3056
3057 return 0;
3058}
3059
3060static struct amba_id pl330_ids[] = {
3061 {
3062 .id = 0x00041330,
3063 .mask = 0x000fffff,
3064 },
3065 { 0, 0 },
3066};
3067
3068MODULE_DEVICE_TABLE(amba, pl330_ids);
3069
3070static struct amba_driver pl330_driver = {
3071 .drv = {
3072 .owner = THIS_MODULE,
3073 .name = "dma-pl330",
3074 .pm = &pl330_pm,
3075 },
3076 .id_table = pl330_ids,
3077 .probe = pl330_probe,
3078 .remove = pl330_remove,
3079};
3080
3081module_amba_driver(pl330_driver);
3082
3083MODULE_AUTHOR("Jaswinder Singh <jassisinghbrar@gmail.com>");
3084MODULE_DESCRIPTION("API Driver for PL330 DMAC");
3085MODULE_LICENSE("GPL");