Loading...
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Driver core interface to the pinctrl subsystem.
4 *
5 * Copyright (C) 2012 ST-Ericsson SA
6 * Written on behalf of Linaro for ST-Ericsson
7 * Based on bits of regulator core, gpio core and clk core
8 *
9 * Author: Linus Walleij <linus.walleij@linaro.org>
10 */
11
12#include <linux/device.h>
13#include <linux/pinctrl/devinfo.h>
14#include <linux/pinctrl/consumer.h>
15#include <linux/slab.h>
16
17/**
18 * pinctrl_bind_pins() - called by the device core before probe
19 * @dev: the device that is just about to probe
20 */
21int pinctrl_bind_pins(struct device *dev)
22{
23 int ret;
24
25 if (dev->of_node_reused)
26 return 0;
27
28 dev->pins = devm_kzalloc(dev, sizeof(*(dev->pins)), GFP_KERNEL);
29 if (!dev->pins)
30 return -ENOMEM;
31
32 dev->pins->p = devm_pinctrl_get(dev);
33 if (IS_ERR(dev->pins->p)) {
34 dev_dbg(dev, "no pinctrl handle\n");
35 ret = PTR_ERR(dev->pins->p);
36 goto cleanup_alloc;
37 }
38
39 dev->pins->default_state = pinctrl_lookup_state(dev->pins->p,
40 PINCTRL_STATE_DEFAULT);
41 if (IS_ERR(dev->pins->default_state)) {
42 dev_dbg(dev, "no default pinctrl state\n");
43 ret = 0;
44 goto cleanup_get;
45 }
46
47 dev->pins->init_state = pinctrl_lookup_state(dev->pins->p,
48 PINCTRL_STATE_INIT);
49 if (IS_ERR(dev->pins->init_state)) {
50 /* Not supplying this state is perfectly legal */
51 dev_dbg(dev, "no init pinctrl state\n");
52
53 ret = pinctrl_select_state(dev->pins->p,
54 dev->pins->default_state);
55 } else {
56 ret = pinctrl_select_state(dev->pins->p, dev->pins->init_state);
57 }
58
59 if (ret) {
60 dev_dbg(dev, "failed to activate initial pinctrl state\n");
61 goto cleanup_get;
62 }
63
64#ifdef CONFIG_PM
65 /*
66 * If power management is enabled, we also look for the optional
67 * sleep and idle pin states, with semantics as defined in
68 * <linux/pinctrl/pinctrl-state.h>
69 */
70 dev->pins->sleep_state = pinctrl_lookup_state(dev->pins->p,
71 PINCTRL_STATE_SLEEP);
72 if (IS_ERR(dev->pins->sleep_state))
73 /* Not supplying this state is perfectly legal */
74 dev_dbg(dev, "no sleep pinctrl state\n");
75
76 dev->pins->idle_state = pinctrl_lookup_state(dev->pins->p,
77 PINCTRL_STATE_IDLE);
78 if (IS_ERR(dev->pins->idle_state))
79 /* Not supplying this state is perfectly legal */
80 dev_dbg(dev, "no idle pinctrl state\n");
81#endif
82
83 return 0;
84
85 /*
86 * If no pinctrl handle or default state was found for this device,
87 * let's explicitly free the pin container in the device, there is
88 * no point in keeping it around.
89 */
90cleanup_get:
91 devm_pinctrl_put(dev->pins->p);
92cleanup_alloc:
93 devm_kfree(dev, dev->pins);
94 dev->pins = NULL;
95
96 /* Return deferrals */
97 if (ret == -EPROBE_DEFER)
98 return ret;
99 /* Return serious errors */
100 if (ret == -EINVAL)
101 return ret;
102 /* We ignore errors like -ENOENT meaning no pinctrl state */
103
104 return 0;
105}
1/*
2 * Driver core interface to the pinctrl subsystem.
3 *
4 * Copyright (C) 2012 ST-Ericsson SA
5 * Written on behalf of Linaro for ST-Ericsson
6 * Based on bits of regulator core, gpio core and clk core
7 *
8 * Author: Linus Walleij <linus.walleij@linaro.org>
9 *
10 * License terms: GNU General Public License (GPL) version 2
11 */
12
13#include <linux/device.h>
14#include <linux/pinctrl/devinfo.h>
15#include <linux/pinctrl/consumer.h>
16#include <linux/slab.h>
17
18/**
19 * pinctrl_bind_pins() - called by the device core before probe
20 * @dev: the device that is just about to probe
21 */
22int pinctrl_bind_pins(struct device *dev)
23{
24 int ret;
25
26 dev->pins = devm_kzalloc(dev, sizeof(*(dev->pins)), GFP_KERNEL);
27 if (!dev->pins)
28 return -ENOMEM;
29
30 dev->pins->p = devm_pinctrl_get(dev);
31 if (IS_ERR(dev->pins->p)) {
32 dev_dbg(dev, "no pinctrl handle\n");
33 ret = PTR_ERR(dev->pins->p);
34 goto cleanup_alloc;
35 }
36
37 dev->pins->default_state = pinctrl_lookup_state(dev->pins->p,
38 PINCTRL_STATE_DEFAULT);
39 if (IS_ERR(dev->pins->default_state)) {
40 dev_dbg(dev, "no default pinctrl state\n");
41 ret = 0;
42 goto cleanup_get;
43 }
44
45 dev->pins->init_state = pinctrl_lookup_state(dev->pins->p,
46 PINCTRL_STATE_INIT);
47 if (IS_ERR(dev->pins->init_state)) {
48 /* Not supplying this state is perfectly legal */
49 dev_dbg(dev, "no init pinctrl state\n");
50
51 ret = pinctrl_select_state(dev->pins->p,
52 dev->pins->default_state);
53 } else {
54 ret = pinctrl_select_state(dev->pins->p, dev->pins->init_state);
55 }
56
57 if (ret) {
58 dev_dbg(dev, "failed to activate initial pinctrl state\n");
59 goto cleanup_get;
60 }
61
62#ifdef CONFIG_PM
63 /*
64 * If power management is enabled, we also look for the optional
65 * sleep and idle pin states, with semantics as defined in
66 * <linux/pinctrl/pinctrl-state.h>
67 */
68 dev->pins->sleep_state = pinctrl_lookup_state(dev->pins->p,
69 PINCTRL_STATE_SLEEP);
70 if (IS_ERR(dev->pins->sleep_state))
71 /* Not supplying this state is perfectly legal */
72 dev_dbg(dev, "no sleep pinctrl state\n");
73
74 dev->pins->idle_state = pinctrl_lookup_state(dev->pins->p,
75 PINCTRL_STATE_IDLE);
76 if (IS_ERR(dev->pins->idle_state))
77 /* Not supplying this state is perfectly legal */
78 dev_dbg(dev, "no idle pinctrl state\n");
79#endif
80
81 return 0;
82
83 /*
84 * If no pinctrl handle or default state was found for this device,
85 * let's explicitly free the pin container in the device, there is
86 * no point in keeping it around.
87 */
88cleanup_get:
89 devm_pinctrl_put(dev->pins->p);
90cleanup_alloc:
91 devm_kfree(dev, dev->pins);
92 dev->pins = NULL;
93
94 /* Return deferrals */
95 if (ret == -EPROBE_DEFER)
96 return ret;
97 /* Return serious errors */
98 if (ret == -EINVAL)
99 return ret;
100 /* We ignore errors like -ENOENT meaning no pinctrl state */
101
102 return 0;
103}