Loading...
1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * usblp.c
4 *
5 * Copyright (c) 1999 Michael Gee <michael@linuxspecific.com>
6 * Copyright (c) 1999 Pavel Machek <pavel@ucw.cz>
7 * Copyright (c) 2000 Randy Dunlap <rdunlap@xenotime.net>
8 * Copyright (c) 2000 Vojtech Pavlik <vojtech@suse.cz>
9 # Copyright (c) 2001 Pete Zaitcev <zaitcev@redhat.com>
10 # Copyright (c) 2001 David Paschal <paschal@rcsis.com>
11 * Copyright (c) 2006 Oliver Neukum <oliver@neukum.name>
12 *
13 * USB Printer Device Class driver for USB printers and printer cables
14 *
15 * Sponsored by SuSE
16 *
17 * ChangeLog:
18 * v0.1 - thorough cleaning, URBification, almost a rewrite
19 * v0.2 - some more cleanups
20 * v0.3 - cleaner again, waitqueue fixes
21 * v0.4 - fixes in unidirectional mode
22 * v0.5 - add DEVICE_ID string support
23 * v0.6 - never time out
24 * v0.7 - fixed bulk-IN read and poll (David Paschal)
25 * v0.8 - add devfs support
26 * v0.9 - fix unplug-while-open paths
27 * v0.10- remove sleep_on, fix error on oom (oliver@neukum.org)
28 * v0.11 - add proto_bias option (Pete Zaitcev)
29 * v0.12 - add hpoj.sourceforge.net ioctls (David Paschal)
30 * v0.13 - alloc space for statusbuf (<status> not on stack);
31 * use usb_alloc_coherent() for read buf & write buf;
32 * none - Maintained in Linux kernel after v0.13
33 */
34
35#include <linux/module.h>
36#include <linux/kernel.h>
37#include <linux/sched/signal.h>
38#include <linux/signal.h>
39#include <linux/poll.h>
40#include <linux/slab.h>
41#include <linux/lp.h>
42#include <linux/mutex.h>
43#undef DEBUG
44#include <linux/usb.h>
45#include <linux/usb/ch9.h>
46#include <linux/ratelimit.h>
47
48/*
49 * Version Information
50 */
51#define DRIVER_AUTHOR "Michael Gee, Pavel Machek, Vojtech Pavlik, Randy Dunlap, Pete Zaitcev, David Paschal"
52#define DRIVER_DESC "USB Printer Device Class driver"
53
54#define USBLP_BUF_SIZE 8192
55#define USBLP_BUF_SIZE_IN 1024
56#define USBLP_DEVICE_ID_SIZE 1024
57
58/* ioctls: */
59#define IOCNR_GET_DEVICE_ID 1
60#define IOCNR_GET_PROTOCOLS 2
61#define IOCNR_SET_PROTOCOL 3
62#define IOCNR_HP_SET_CHANNEL 4
63#define IOCNR_GET_BUS_ADDRESS 5
64#define IOCNR_GET_VID_PID 6
65#define IOCNR_SOFT_RESET 7
66/* Get device_id string: */
67#define LPIOC_GET_DEVICE_ID(len) _IOC(_IOC_READ, 'P', IOCNR_GET_DEVICE_ID, len)
68/* The following ioctls were added for http://hpoj.sourceforge.net:
69 * Get two-int array:
70 * [0]=current protocol
71 * (1=USB_CLASS_PRINTER/1/1, 2=USB_CLASS_PRINTER/1/2,
72 * 3=USB_CLASS_PRINTER/1/3),
73 * [1]=supported protocol mask (mask&(1<<n)!=0 means
74 * USB_CLASS_PRINTER/1/n supported):
75 */
76#define LPIOC_GET_PROTOCOLS(len) _IOC(_IOC_READ, 'P', IOCNR_GET_PROTOCOLS, len)
77/*
78 * Set protocol
79 * (arg: 1=USB_CLASS_PRINTER/1/1, 2=USB_CLASS_PRINTER/1/2,
80 * 3=USB_CLASS_PRINTER/1/3):
81 */
82#define LPIOC_SET_PROTOCOL _IOC(_IOC_WRITE, 'P', IOCNR_SET_PROTOCOL, 0)
83/* Set channel number (HP Vendor-specific command): */
84#define LPIOC_HP_SET_CHANNEL _IOC(_IOC_WRITE, 'P', IOCNR_HP_SET_CHANNEL, 0)
85/* Get two-int array: [0]=bus number, [1]=device address: */
86#define LPIOC_GET_BUS_ADDRESS(len) _IOC(_IOC_READ, 'P', IOCNR_GET_BUS_ADDRESS, len)
87/* Get two-int array: [0]=vendor ID, [1]=product ID: */
88#define LPIOC_GET_VID_PID(len) _IOC(_IOC_READ, 'P', IOCNR_GET_VID_PID, len)
89/* Perform class specific soft reset */
90#define LPIOC_SOFT_RESET _IOC(_IOC_NONE, 'P', IOCNR_SOFT_RESET, 0);
91
92/*
93 * A DEVICE_ID string may include the printer's serial number.
94 * It should end with a semi-colon (';').
95 * An example from an HP 970C DeskJet printer is (this is one long string,
96 * with the serial number changed):
97MFG:HEWLETT-PACKARD;MDL:DESKJET 970C;CMD:MLC,PCL,PML;CLASS:PRINTER;DESCRIPTION:Hewlett-Packard DeskJet 970C;SERN:US970CSEPROF;VSTATUS:$HB0$NC0,ff,DN,IDLE,CUT,K1,C0,DP,NR,KP000,CP027;VP:0800,FL,B0;VJ: ;
98 */
99
100/*
101 * USB Printer Requests
102 */
103
104#define USBLP_REQ_GET_ID 0x00
105#define USBLP_REQ_GET_STATUS 0x01
106#define USBLP_REQ_RESET 0x02
107#define USBLP_REQ_HP_CHANNEL_CHANGE_REQUEST 0x00 /* HP Vendor-specific */
108
109#define USBLP_MINORS 16
110#define USBLP_MINOR_BASE 0
111
112#define USBLP_CTL_TIMEOUT 5000 /* 5 seconds */
113
114#define USBLP_FIRST_PROTOCOL 1
115#define USBLP_LAST_PROTOCOL 3
116#define USBLP_MAX_PROTOCOLS (USBLP_LAST_PROTOCOL+1)
117
118/*
119 * some arbitrary status buffer size;
120 * need a status buffer that is allocated via kmalloc(), not on stack
121 */
122#define STATUS_BUF_SIZE 8
123
124/*
125 * Locks down the locking order:
126 * ->wmut locks wstatus.
127 * ->mut locks the whole usblp, except [rw]complete, and thus, by indirection,
128 * [rw]status. We only touch status when we know the side idle.
129 * ->lock locks what interrupt accesses.
130 */
131struct usblp {
132 struct usb_device *dev; /* USB device */
133 struct mutex wmut;
134 struct mutex mut;
135 spinlock_t lock; /* locks rcomplete, wcomplete */
136 char *readbuf; /* read transfer_buffer */
137 char *statusbuf; /* status transfer_buffer */
138 struct usb_anchor urbs;
139 wait_queue_head_t rwait, wwait;
140 int readcount; /* Counter for reads */
141 int ifnum; /* Interface number */
142 struct usb_interface *intf; /* The interface */
143 /*
144 * Alternate-setting numbers and endpoints for each protocol
145 * (USB_CLASS_PRINTER/1/{index=1,2,3}) that the device supports:
146 */
147 struct {
148 int alt_setting;
149 struct usb_endpoint_descriptor *epwrite;
150 struct usb_endpoint_descriptor *epread;
151 } protocol[USBLP_MAX_PROTOCOLS];
152 int current_protocol;
153 int minor; /* minor number of device */
154 int wcomplete, rcomplete;
155 int wstatus; /* bytes written or error */
156 int rstatus; /* bytes ready or error */
157 unsigned int quirks; /* quirks flags */
158 unsigned int flags; /* mode flags */
159 unsigned char used; /* True if open */
160 unsigned char present; /* True if not disconnected */
161 unsigned char bidir; /* interface is bidirectional */
162 unsigned char no_paper; /* Paper Out happened */
163 unsigned char *device_id_string; /* IEEE 1284 DEVICE ID string (ptr) */
164 /* first 2 bytes are (big-endian) length */
165};
166
167#ifdef DEBUG
168static void usblp_dump(struct usblp *usblp)
169{
170 struct device *dev = &usblp->intf->dev;
171 int p;
172
173 dev_dbg(dev, "usblp=0x%p\n", usblp);
174 dev_dbg(dev, "dev=0x%p\n", usblp->dev);
175 dev_dbg(dev, "present=%d\n", usblp->present);
176 dev_dbg(dev, "readbuf=0x%p\n", usblp->readbuf);
177 dev_dbg(dev, "readcount=%d\n", usblp->readcount);
178 dev_dbg(dev, "ifnum=%d\n", usblp->ifnum);
179 for (p = USBLP_FIRST_PROTOCOL; p <= USBLP_LAST_PROTOCOL; p++) {
180 dev_dbg(dev, "protocol[%d].alt_setting=%d\n", p,
181 usblp->protocol[p].alt_setting);
182 dev_dbg(dev, "protocol[%d].epwrite=%p\n", p,
183 usblp->protocol[p].epwrite);
184 dev_dbg(dev, "protocol[%d].epread=%p\n", p,
185 usblp->protocol[p].epread);
186 }
187 dev_dbg(dev, "current_protocol=%d\n", usblp->current_protocol);
188 dev_dbg(dev, "minor=%d\n", usblp->minor);
189 dev_dbg(dev, "wstatus=%d\n", usblp->wstatus);
190 dev_dbg(dev, "rstatus=%d\n", usblp->rstatus);
191 dev_dbg(dev, "quirks=%d\n", usblp->quirks);
192 dev_dbg(dev, "used=%d\n", usblp->used);
193 dev_dbg(dev, "bidir=%d\n", usblp->bidir);
194 dev_dbg(dev, "device_id_string=\"%s\"\n",
195 usblp->device_id_string ?
196 usblp->device_id_string + 2 :
197 (unsigned char *)"(null)");
198}
199#endif
200
201/* Quirks: various printer quirks are handled by this table & its flags. */
202
203struct quirk_printer_struct {
204 __u16 vendorId;
205 __u16 productId;
206 unsigned int quirks;
207};
208
209#define USBLP_QUIRK_BIDIR 0x1 /* reports bidir but requires unidirectional mode (no INs/reads) */
210#define USBLP_QUIRK_USB_INIT 0x2 /* needs vendor USB init string */
211#define USBLP_QUIRK_BAD_CLASS 0x4 /* descriptor uses vendor-specific Class or SubClass */
212
213static const struct quirk_printer_struct quirk_printers[] = {
214 { 0x03f0, 0x0004, USBLP_QUIRK_BIDIR }, /* HP DeskJet 895C */
215 { 0x03f0, 0x0104, USBLP_QUIRK_BIDIR }, /* HP DeskJet 880C */
216 { 0x03f0, 0x0204, USBLP_QUIRK_BIDIR }, /* HP DeskJet 815C */
217 { 0x03f0, 0x0304, USBLP_QUIRK_BIDIR }, /* HP DeskJet 810C/812C */
218 { 0x03f0, 0x0404, USBLP_QUIRK_BIDIR }, /* HP DeskJet 830C */
219 { 0x03f0, 0x0504, USBLP_QUIRK_BIDIR }, /* HP DeskJet 885C */
220 { 0x03f0, 0x0604, USBLP_QUIRK_BIDIR }, /* HP DeskJet 840C */
221 { 0x03f0, 0x0804, USBLP_QUIRK_BIDIR }, /* HP DeskJet 816C */
222 { 0x03f0, 0x1104, USBLP_QUIRK_BIDIR }, /* HP Deskjet 959C */
223 { 0x0409, 0xefbe, USBLP_QUIRK_BIDIR }, /* NEC Picty900 (HP OEM) */
224 { 0x0409, 0xbef4, USBLP_QUIRK_BIDIR }, /* NEC Picty760 (HP OEM) */
225 { 0x0409, 0xf0be, USBLP_QUIRK_BIDIR }, /* NEC Picty920 (HP OEM) */
226 { 0x0409, 0xf1be, USBLP_QUIRK_BIDIR }, /* NEC Picty800 (HP OEM) */
227 { 0x0482, 0x0010, USBLP_QUIRK_BIDIR }, /* Kyocera Mita FS 820, by zut <kernel@zut.de> */
228 { 0x04f9, 0x000d, USBLP_QUIRK_BIDIR }, /* Brother Industries, Ltd HL-1440 Laser Printer */
229 { 0x04b8, 0x0202, USBLP_QUIRK_BAD_CLASS }, /* Seiko Epson Receipt Printer M129C */
230 { 0, 0 }
231};
232
233static int usblp_wwait(struct usblp *usblp, int nonblock);
234static int usblp_wtest(struct usblp *usblp, int nonblock);
235static int usblp_rwait_and_lock(struct usblp *usblp, int nonblock);
236static int usblp_rtest(struct usblp *usblp, int nonblock);
237static int usblp_submit_read(struct usblp *usblp);
238static int usblp_select_alts(struct usblp *usblp);
239static int usblp_set_protocol(struct usblp *usblp, int protocol);
240static int usblp_cache_device_id_string(struct usblp *usblp);
241
242/* forward reference to make our lives easier */
243static struct usb_driver usblp_driver;
244static DEFINE_MUTEX(usblp_mutex); /* locks the existence of usblp's */
245
246/*
247 * Functions for usblp control messages.
248 */
249
250static int usblp_ctrl_msg(struct usblp *usblp, int request, int type, int dir, int recip, int value, void *buf, int len)
251{
252 int retval;
253 int index = usblp->ifnum;
254
255 /* High byte has the interface index.
256 Low byte has the alternate setting.
257 */
258 if ((request == USBLP_REQ_GET_ID) && (type == USB_TYPE_CLASS))
259 index = (usblp->ifnum<<8)|usblp->protocol[usblp->current_protocol].alt_setting;
260
261 retval = usb_control_msg(usblp->dev,
262 dir ? usb_rcvctrlpipe(usblp->dev, 0) : usb_sndctrlpipe(usblp->dev, 0),
263 request, type | dir | recip, value, index, buf, len, USBLP_CTL_TIMEOUT);
264 dev_dbg(&usblp->intf->dev,
265 "usblp_control_msg: rq: 0x%02x dir: %d recip: %d value: %d idx: %d len: %#x result: %d\n",
266 request, !!dir, recip, value, index, len, retval);
267 return retval < 0 ? retval : 0;
268}
269
270#define usblp_read_status(usblp, status)\
271 usblp_ctrl_msg(usblp, USBLP_REQ_GET_STATUS, USB_TYPE_CLASS, USB_DIR_IN, USB_RECIP_INTERFACE, 0, status, 1)
272#define usblp_get_id(usblp, config, id, maxlen)\
273 usblp_ctrl_msg(usblp, USBLP_REQ_GET_ID, USB_TYPE_CLASS, USB_DIR_IN, USB_RECIP_INTERFACE, config, id, maxlen)
274#define usblp_reset(usblp)\
275 usblp_ctrl_msg(usblp, USBLP_REQ_RESET, USB_TYPE_CLASS, USB_DIR_OUT, USB_RECIP_OTHER, 0, NULL, 0)
276
277static int usblp_hp_channel_change_request(struct usblp *usblp, int channel, u8 *new_channel)
278{
279 u8 *buf;
280 int ret;
281
282 buf = kzalloc(1, GFP_KERNEL);
283 if (!buf)
284 return -ENOMEM;
285
286 ret = usblp_ctrl_msg(usblp, USBLP_REQ_HP_CHANNEL_CHANGE_REQUEST,
287 USB_TYPE_VENDOR, USB_DIR_IN, USB_RECIP_INTERFACE,
288 channel, buf, 1);
289 if (ret == 0)
290 *new_channel = buf[0];
291
292 kfree(buf);
293
294 return ret;
295}
296
297/*
298 * See the description for usblp_select_alts() below for the usage
299 * explanation. Look into your /sys/kernel/debug/usb/devices and dmesg in
300 * case of any trouble.
301 */
302static int proto_bias = -1;
303
304/*
305 * URB callback.
306 */
307
308static void usblp_bulk_read(struct urb *urb)
309{
310 struct usblp *usblp = urb->context;
311 int status = urb->status;
312 unsigned long flags;
313
314 if (usblp->present && usblp->used) {
315 if (status)
316 printk(KERN_WARNING "usblp%d: "
317 "nonzero read bulk status received: %d\n",
318 usblp->minor, status);
319 }
320 spin_lock_irqsave(&usblp->lock, flags);
321 if (status < 0)
322 usblp->rstatus = status;
323 else
324 usblp->rstatus = urb->actual_length;
325 usblp->rcomplete = 1;
326 wake_up(&usblp->rwait);
327 spin_unlock_irqrestore(&usblp->lock, flags);
328
329 usb_free_urb(urb);
330}
331
332static void usblp_bulk_write(struct urb *urb)
333{
334 struct usblp *usblp = urb->context;
335 int status = urb->status;
336 unsigned long flags;
337
338 if (usblp->present && usblp->used) {
339 if (status)
340 printk(KERN_WARNING "usblp%d: "
341 "nonzero write bulk status received: %d\n",
342 usblp->minor, status);
343 }
344 spin_lock_irqsave(&usblp->lock, flags);
345 if (status < 0)
346 usblp->wstatus = status;
347 else
348 usblp->wstatus = urb->actual_length;
349 usblp->no_paper = 0;
350 usblp->wcomplete = 1;
351 wake_up(&usblp->wwait);
352 spin_unlock_irqrestore(&usblp->lock, flags);
353
354 usb_free_urb(urb);
355}
356
357/*
358 * Get and print printer errors.
359 */
360
361static const char *usblp_messages[] = { "ok", "out of paper", "off-line", "on fire" };
362
363static int usblp_check_status(struct usblp *usblp, int err)
364{
365 unsigned char status, newerr = 0;
366 int error;
367
368 mutex_lock(&usblp->mut);
369 if ((error = usblp_read_status(usblp, usblp->statusbuf)) < 0) {
370 mutex_unlock(&usblp->mut);
371 printk_ratelimited(KERN_ERR
372 "usblp%d: error %d reading printer status\n",
373 usblp->minor, error);
374 return 0;
375 }
376 status = *usblp->statusbuf;
377 mutex_unlock(&usblp->mut);
378
379 if (~status & LP_PERRORP)
380 newerr = 3;
381 if (status & LP_POUTPA)
382 newerr = 1;
383 if (~status & LP_PSELECD)
384 newerr = 2;
385
386 if (newerr != err) {
387 printk(KERN_INFO "usblp%d: %s\n",
388 usblp->minor, usblp_messages[newerr]);
389 }
390
391 return newerr;
392}
393
394static int handle_bidir(struct usblp *usblp)
395{
396 if (usblp->bidir && usblp->used) {
397 if (usblp_submit_read(usblp) < 0)
398 return -EIO;
399 }
400 return 0;
401}
402
403/*
404 * File op functions.
405 */
406
407static int usblp_open(struct inode *inode, struct file *file)
408{
409 int minor = iminor(inode);
410 struct usblp *usblp;
411 struct usb_interface *intf;
412 int retval;
413
414 if (minor < 0)
415 return -ENODEV;
416
417 mutex_lock(&usblp_mutex);
418
419 retval = -ENODEV;
420 intf = usb_find_interface(&usblp_driver, minor);
421 if (!intf)
422 goto out;
423 usblp = usb_get_intfdata(intf);
424 if (!usblp || !usblp->dev || !usblp->present)
425 goto out;
426
427 retval = -EBUSY;
428 if (usblp->used)
429 goto out;
430
431 /*
432 * We do not implement LP_ABORTOPEN/LPABORTOPEN for two reasons:
433 * - We do not want persistent state which close(2) does not clear
434 * - It is not used anyway, according to CUPS people
435 */
436
437 retval = usb_autopm_get_interface(intf);
438 if (retval < 0)
439 goto out;
440 usblp->used = 1;
441 file->private_data = usblp;
442
443 usblp->wcomplete = 1; /* we begin writeable */
444 usblp->wstatus = 0;
445 usblp->rcomplete = 0;
446
447 if (handle_bidir(usblp) < 0) {
448 usb_autopm_put_interface(intf);
449 usblp->used = 0;
450 file->private_data = NULL;
451 retval = -EIO;
452 }
453out:
454 mutex_unlock(&usblp_mutex);
455 return retval;
456}
457
458static void usblp_cleanup(struct usblp *usblp)
459{
460 printk(KERN_INFO "usblp%d: removed\n", usblp->minor);
461
462 kfree(usblp->readbuf);
463 kfree(usblp->device_id_string);
464 kfree(usblp->statusbuf);
465 usb_put_intf(usblp->intf);
466 kfree(usblp);
467}
468
469static void usblp_unlink_urbs(struct usblp *usblp)
470{
471 usb_kill_anchored_urbs(&usblp->urbs);
472}
473
474static int usblp_release(struct inode *inode, struct file *file)
475{
476 struct usblp *usblp = file->private_data;
477
478 usblp->flags &= ~LP_ABORT;
479
480 mutex_lock(&usblp_mutex);
481 usblp->used = 0;
482 if (usblp->present)
483 usblp_unlink_urbs(usblp);
484
485 usb_autopm_put_interface(usblp->intf);
486
487 if (!usblp->present) /* finish cleanup from disconnect */
488 usblp_cleanup(usblp); /* any URBs must be dead */
489
490 mutex_unlock(&usblp_mutex);
491 return 0;
492}
493
494/* No kernel lock - fine */
495static __poll_t usblp_poll(struct file *file, struct poll_table_struct *wait)
496{
497 struct usblp *usblp = file->private_data;
498 __poll_t ret = 0;
499 unsigned long flags;
500
501 /* Should we check file->f_mode & FMODE_WRITE before poll_wait()? */
502 poll_wait(file, &usblp->rwait, wait);
503 poll_wait(file, &usblp->wwait, wait);
504
505 mutex_lock(&usblp->mut);
506 if (!usblp->present)
507 ret |= EPOLLHUP;
508 mutex_unlock(&usblp->mut);
509
510 spin_lock_irqsave(&usblp->lock, flags);
511 if (usblp->bidir && usblp->rcomplete)
512 ret |= EPOLLIN | EPOLLRDNORM;
513 if (usblp->no_paper || usblp->wcomplete)
514 ret |= EPOLLOUT | EPOLLWRNORM;
515 spin_unlock_irqrestore(&usblp->lock, flags);
516 return ret;
517}
518
519static long usblp_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
520{
521 struct usblp *usblp = file->private_data;
522 int length, err, i;
523 unsigned char newChannel;
524 int status;
525 int twoints[2];
526 int retval = 0;
527
528 mutex_lock(&usblp->mut);
529 if (!usblp->present) {
530 retval = -ENODEV;
531 goto done;
532 }
533
534 dev_dbg(&usblp->intf->dev,
535 "usblp_ioctl: cmd=0x%x (%c nr=%d len=%d dir=%d)\n", cmd,
536 _IOC_TYPE(cmd), _IOC_NR(cmd), _IOC_SIZE(cmd), _IOC_DIR(cmd));
537
538 if (_IOC_TYPE(cmd) == 'P') /* new-style ioctl number */
539
540 switch (_IOC_NR(cmd)) {
541
542 case IOCNR_GET_DEVICE_ID: /* get the DEVICE_ID string */
543 if (_IOC_DIR(cmd) != _IOC_READ) {
544 retval = -EINVAL;
545 goto done;
546 }
547
548 length = usblp_cache_device_id_string(usblp);
549 if (length < 0) {
550 retval = length;
551 goto done;
552 }
553 if (length > _IOC_SIZE(cmd))
554 length = _IOC_SIZE(cmd); /* truncate */
555
556 if (copy_to_user((void __user *) arg,
557 usblp->device_id_string,
558 (unsigned long) length)) {
559 retval = -EFAULT;
560 goto done;
561 }
562
563 break;
564
565 case IOCNR_GET_PROTOCOLS:
566 if (_IOC_DIR(cmd) != _IOC_READ ||
567 _IOC_SIZE(cmd) < sizeof(twoints)) {
568 retval = -EINVAL;
569 goto done;
570 }
571
572 twoints[0] = usblp->current_protocol;
573 twoints[1] = 0;
574 for (i = USBLP_FIRST_PROTOCOL;
575 i <= USBLP_LAST_PROTOCOL; i++) {
576 if (usblp->protocol[i].alt_setting >= 0)
577 twoints[1] |= (1<<i);
578 }
579
580 if (copy_to_user((void __user *)arg,
581 (unsigned char *)twoints,
582 sizeof(twoints))) {
583 retval = -EFAULT;
584 goto done;
585 }
586
587 break;
588
589 case IOCNR_SET_PROTOCOL:
590 if (_IOC_DIR(cmd) != _IOC_WRITE) {
591 retval = -EINVAL;
592 goto done;
593 }
594
595#ifdef DEBUG
596 if (arg == -10) {
597 usblp_dump(usblp);
598 break;
599 }
600#endif
601
602 usblp_unlink_urbs(usblp);
603 retval = usblp_set_protocol(usblp, arg);
604 if (retval < 0) {
605 usblp_set_protocol(usblp,
606 usblp->current_protocol);
607 }
608 break;
609
610 case IOCNR_HP_SET_CHANNEL:
611 if (_IOC_DIR(cmd) != _IOC_WRITE ||
612 le16_to_cpu(usblp->dev->descriptor.idVendor) != 0x03F0 ||
613 usblp->quirks & USBLP_QUIRK_BIDIR) {
614 retval = -EINVAL;
615 goto done;
616 }
617
618 err = usblp_hp_channel_change_request(usblp,
619 arg, &newChannel);
620 if (err < 0) {
621 dev_err(&usblp->dev->dev,
622 "usblp%d: error = %d setting "
623 "HP channel\n",
624 usblp->minor, err);
625 retval = -EIO;
626 goto done;
627 }
628
629 dev_dbg(&usblp->intf->dev,
630 "usblp%d requested/got HP channel %ld/%d\n",
631 usblp->minor, arg, newChannel);
632 break;
633
634 case IOCNR_GET_BUS_ADDRESS:
635 if (_IOC_DIR(cmd) != _IOC_READ ||
636 _IOC_SIZE(cmd) < sizeof(twoints)) {
637 retval = -EINVAL;
638 goto done;
639 }
640
641 twoints[0] = usblp->dev->bus->busnum;
642 twoints[1] = usblp->dev->devnum;
643 if (copy_to_user((void __user *)arg,
644 (unsigned char *)twoints,
645 sizeof(twoints))) {
646 retval = -EFAULT;
647 goto done;
648 }
649
650 dev_dbg(&usblp->intf->dev,
651 "usblp%d is bus=%d, device=%d\n",
652 usblp->minor, twoints[0], twoints[1]);
653 break;
654
655 case IOCNR_GET_VID_PID:
656 if (_IOC_DIR(cmd) != _IOC_READ ||
657 _IOC_SIZE(cmd) < sizeof(twoints)) {
658 retval = -EINVAL;
659 goto done;
660 }
661
662 twoints[0] = le16_to_cpu(usblp->dev->descriptor.idVendor);
663 twoints[1] = le16_to_cpu(usblp->dev->descriptor.idProduct);
664 if (copy_to_user((void __user *)arg,
665 (unsigned char *)twoints,
666 sizeof(twoints))) {
667 retval = -EFAULT;
668 goto done;
669 }
670
671 dev_dbg(&usblp->intf->dev,
672 "usblp%d is VID=0x%4.4X, PID=0x%4.4X\n",
673 usblp->minor, twoints[0], twoints[1]);
674 break;
675
676 case IOCNR_SOFT_RESET:
677 if (_IOC_DIR(cmd) != _IOC_NONE) {
678 retval = -EINVAL;
679 goto done;
680 }
681 retval = usblp_reset(usblp);
682 break;
683 default:
684 retval = -ENOTTY;
685 }
686 else /* old-style ioctl value */
687 switch (cmd) {
688
689 case LPGETSTATUS:
690 retval = usblp_read_status(usblp, usblp->statusbuf);
691 if (retval) {
692 printk_ratelimited(KERN_ERR "usblp%d:"
693 "failed reading printer status (%d)\n",
694 usblp->minor, retval);
695 retval = -EIO;
696 goto done;
697 }
698 status = *usblp->statusbuf;
699 if (copy_to_user((void __user *)arg, &status, sizeof(int)))
700 retval = -EFAULT;
701 break;
702
703 case LPABORT:
704 if (arg)
705 usblp->flags |= LP_ABORT;
706 else
707 usblp->flags &= ~LP_ABORT;
708 break;
709
710 default:
711 retval = -ENOTTY;
712 }
713
714done:
715 mutex_unlock(&usblp->mut);
716 return retval;
717}
718
719static struct urb *usblp_new_writeurb(struct usblp *usblp, int transfer_length)
720{
721 struct urb *urb;
722 char *writebuf;
723
724 writebuf = kmalloc(transfer_length, GFP_KERNEL);
725 if (writebuf == NULL)
726 return NULL;
727 urb = usb_alloc_urb(0, GFP_KERNEL);
728 if (urb == NULL) {
729 kfree(writebuf);
730 return NULL;
731 }
732
733 usb_fill_bulk_urb(urb, usblp->dev,
734 usb_sndbulkpipe(usblp->dev,
735 usblp->protocol[usblp->current_protocol].epwrite->bEndpointAddress),
736 writebuf, transfer_length, usblp_bulk_write, usblp);
737 urb->transfer_flags |= URB_FREE_BUFFER;
738
739 return urb;
740}
741
742static ssize_t usblp_write(struct file *file, const char __user *buffer, size_t count, loff_t *ppos)
743{
744 struct usblp *usblp = file->private_data;
745 struct urb *writeurb;
746 int rv;
747 int transfer_length;
748 ssize_t writecount = 0;
749
750 if (mutex_lock_interruptible(&usblp->wmut)) {
751 rv = -EINTR;
752 goto raise_biglock;
753 }
754 if ((rv = usblp_wwait(usblp, !!(file->f_flags & O_NONBLOCK))) < 0)
755 goto raise_wait;
756
757 while (writecount < count) {
758 /*
759 * Step 1: Submit next block.
760 */
761 if ((transfer_length = count - writecount) > USBLP_BUF_SIZE)
762 transfer_length = USBLP_BUF_SIZE;
763
764 rv = -ENOMEM;
765 writeurb = usblp_new_writeurb(usblp, transfer_length);
766 if (writeurb == NULL)
767 goto raise_urb;
768 usb_anchor_urb(writeurb, &usblp->urbs);
769
770 if (copy_from_user(writeurb->transfer_buffer,
771 buffer + writecount, transfer_length)) {
772 rv = -EFAULT;
773 goto raise_badaddr;
774 }
775
776 spin_lock_irq(&usblp->lock);
777 usblp->wcomplete = 0;
778 spin_unlock_irq(&usblp->lock);
779 if ((rv = usb_submit_urb(writeurb, GFP_KERNEL)) < 0) {
780 usblp->wstatus = 0;
781 spin_lock_irq(&usblp->lock);
782 usblp->no_paper = 0;
783 usblp->wcomplete = 1;
784 wake_up(&usblp->wwait);
785 spin_unlock_irq(&usblp->lock);
786 if (rv != -ENOMEM)
787 rv = -EIO;
788 goto raise_submit;
789 }
790
791 /*
792 * Step 2: Wait for transfer to end, collect results.
793 */
794 rv = usblp_wwait(usblp, !!(file->f_flags&O_NONBLOCK));
795 if (rv < 0) {
796 if (rv == -EAGAIN) {
797 /* Presume that it's going to complete well. */
798 writecount += transfer_length;
799 }
800 if (rv == -ENOSPC) {
801 spin_lock_irq(&usblp->lock);
802 usblp->no_paper = 1; /* Mark for poll(2) */
803 spin_unlock_irq(&usblp->lock);
804 writecount += transfer_length;
805 }
806 /* Leave URB dangling, to be cleaned on close. */
807 goto collect_error;
808 }
809
810 if (usblp->wstatus < 0) {
811 rv = -EIO;
812 goto collect_error;
813 }
814 /*
815 * This is critical: it must be our URB, not other writer's.
816 * The wmut exists mainly to cover us here.
817 */
818 writecount += usblp->wstatus;
819 }
820
821 mutex_unlock(&usblp->wmut);
822 return writecount;
823
824raise_submit:
825raise_badaddr:
826 usb_unanchor_urb(writeurb);
827 usb_free_urb(writeurb);
828raise_urb:
829raise_wait:
830collect_error: /* Out of raise sequence */
831 mutex_unlock(&usblp->wmut);
832raise_biglock:
833 return writecount ? writecount : rv;
834}
835
836/*
837 * Notice that we fail to restart in a few cases: on EFAULT, on restart
838 * error, etc. This is the historical behaviour. In all such cases we return
839 * EIO, and applications loop in order to get the new read going.
840 */
841static ssize_t usblp_read(struct file *file, char __user *buffer, size_t len, loff_t *ppos)
842{
843 struct usblp *usblp = file->private_data;
844 ssize_t count;
845 ssize_t avail;
846 int rv;
847
848 if (!usblp->bidir)
849 return -EINVAL;
850
851 rv = usblp_rwait_and_lock(usblp, !!(file->f_flags & O_NONBLOCK));
852 if (rv < 0)
853 return rv;
854
855 if (!usblp->present) {
856 count = -ENODEV;
857 goto done;
858 }
859
860 if ((avail = usblp->rstatus) < 0) {
861 printk(KERN_ERR "usblp%d: error %d reading from printer\n",
862 usblp->minor, (int)avail);
863 usblp_submit_read(usblp);
864 count = -EIO;
865 goto done;
866 }
867
868 count = len < avail - usblp->readcount ? len : avail - usblp->readcount;
869 if (count != 0 &&
870 copy_to_user(buffer, usblp->readbuf + usblp->readcount, count)) {
871 count = -EFAULT;
872 goto done;
873 }
874
875 if ((usblp->readcount += count) == avail) {
876 if (usblp_submit_read(usblp) < 0) {
877 /* We don't want to leak USB return codes into errno. */
878 if (count == 0)
879 count = -EIO;
880 goto done;
881 }
882 }
883
884done:
885 mutex_unlock(&usblp->mut);
886 return count;
887}
888
889/*
890 * Wait for the write path to come idle.
891 * This is called under the ->wmut, so the idle path stays idle.
892 *
893 * Our write path has a peculiar property: it does not buffer like a tty,
894 * but waits for the write to succeed. This allows our ->release to bug out
895 * without waiting for writes to drain. But it obviously does not work
896 * when O_NONBLOCK is set. So, applications setting O_NONBLOCK must use
897 * select(2) or poll(2) to wait for the buffer to drain before closing.
898 * Alternatively, set blocking mode with fcntl and issue a zero-size write.
899 */
900static int usblp_wwait(struct usblp *usblp, int nonblock)
901{
902 DECLARE_WAITQUEUE(waita, current);
903 int rc;
904 int err = 0;
905
906 add_wait_queue(&usblp->wwait, &waita);
907 for (;;) {
908 if (mutex_lock_interruptible(&usblp->mut)) {
909 rc = -EINTR;
910 break;
911 }
912 set_current_state(TASK_INTERRUPTIBLE);
913 rc = usblp_wtest(usblp, nonblock);
914 mutex_unlock(&usblp->mut);
915 if (rc <= 0)
916 break;
917
918 if (schedule_timeout(msecs_to_jiffies(1500)) == 0) {
919 if (usblp->flags & LP_ABORT) {
920 err = usblp_check_status(usblp, err);
921 if (err == 1) { /* Paper out */
922 rc = -ENOSPC;
923 break;
924 }
925 } else {
926 /* Prod the printer, Gentoo#251237. */
927 mutex_lock(&usblp->mut);
928 usblp_read_status(usblp, usblp->statusbuf);
929 mutex_unlock(&usblp->mut);
930 }
931 }
932 }
933 set_current_state(TASK_RUNNING);
934 remove_wait_queue(&usblp->wwait, &waita);
935 return rc;
936}
937
938static int usblp_wtest(struct usblp *usblp, int nonblock)
939{
940 unsigned long flags;
941
942 if (!usblp->present)
943 return -ENODEV;
944 if (signal_pending(current))
945 return -EINTR;
946 spin_lock_irqsave(&usblp->lock, flags);
947 if (usblp->wcomplete) {
948 spin_unlock_irqrestore(&usblp->lock, flags);
949 return 0;
950 }
951 spin_unlock_irqrestore(&usblp->lock, flags);
952 if (nonblock)
953 return -EAGAIN;
954 return 1;
955}
956
957/*
958 * Wait for read bytes to become available. This probably should have been
959 * called usblp_r_lock_and_wait(), because we lock first. But it's a traditional
960 * name for functions which lock and return.
961 *
962 * We do not use wait_event_interruptible because it makes locking iffy.
963 */
964static int usblp_rwait_and_lock(struct usblp *usblp, int nonblock)
965{
966 DECLARE_WAITQUEUE(waita, current);
967 int rc;
968
969 add_wait_queue(&usblp->rwait, &waita);
970 for (;;) {
971 if (mutex_lock_interruptible(&usblp->mut)) {
972 rc = -EINTR;
973 break;
974 }
975 set_current_state(TASK_INTERRUPTIBLE);
976 if ((rc = usblp_rtest(usblp, nonblock)) < 0) {
977 mutex_unlock(&usblp->mut);
978 break;
979 }
980 if (rc == 0) /* Keep it locked */
981 break;
982 mutex_unlock(&usblp->mut);
983 schedule();
984 }
985 set_current_state(TASK_RUNNING);
986 remove_wait_queue(&usblp->rwait, &waita);
987 return rc;
988}
989
990static int usblp_rtest(struct usblp *usblp, int nonblock)
991{
992 unsigned long flags;
993
994 if (!usblp->present)
995 return -ENODEV;
996 if (signal_pending(current))
997 return -EINTR;
998 spin_lock_irqsave(&usblp->lock, flags);
999 if (usblp->rcomplete) {
1000 spin_unlock_irqrestore(&usblp->lock, flags);
1001 return 0;
1002 }
1003 spin_unlock_irqrestore(&usblp->lock, flags);
1004 if (nonblock)
1005 return -EAGAIN;
1006 return 1;
1007}
1008
1009/*
1010 * Please check ->bidir and other such things outside for now.
1011 */
1012static int usblp_submit_read(struct usblp *usblp)
1013{
1014 struct urb *urb;
1015 unsigned long flags;
1016 int rc;
1017
1018 rc = -ENOMEM;
1019 urb = usb_alloc_urb(0, GFP_KERNEL);
1020 if (urb == NULL)
1021 goto raise_urb;
1022
1023 usb_fill_bulk_urb(urb, usblp->dev,
1024 usb_rcvbulkpipe(usblp->dev,
1025 usblp->protocol[usblp->current_protocol].epread->bEndpointAddress),
1026 usblp->readbuf, USBLP_BUF_SIZE_IN,
1027 usblp_bulk_read, usblp);
1028 usb_anchor_urb(urb, &usblp->urbs);
1029
1030 spin_lock_irqsave(&usblp->lock, flags);
1031 usblp->readcount = 0; /* XXX Why here? */
1032 usblp->rcomplete = 0;
1033 spin_unlock_irqrestore(&usblp->lock, flags);
1034 if ((rc = usb_submit_urb(urb, GFP_KERNEL)) < 0) {
1035 dev_dbg(&usblp->intf->dev, "error submitting urb (%d)\n", rc);
1036 spin_lock_irqsave(&usblp->lock, flags);
1037 usblp->rstatus = rc;
1038 usblp->rcomplete = 1;
1039 spin_unlock_irqrestore(&usblp->lock, flags);
1040 goto raise_submit;
1041 }
1042
1043 return 0;
1044
1045raise_submit:
1046 usb_unanchor_urb(urb);
1047 usb_free_urb(urb);
1048raise_urb:
1049 return rc;
1050}
1051
1052/*
1053 * Checks for printers that have quirks, such as requiring unidirectional
1054 * communication but reporting bidirectional; currently some HP printers
1055 * have this flaw (HP 810, 880, 895, etc.), or needing an init string
1056 * sent at each open (like some Epsons).
1057 * Returns 1 if found, 0 if not found.
1058 *
1059 * HP recommended that we use the bidirectional interface but
1060 * don't attempt any bulk IN transfers from the IN endpoint.
1061 * Here's some more detail on the problem:
1062 * The problem is not that it isn't bidirectional though. The problem
1063 * is that if you request a device ID, or status information, while
1064 * the buffers are full, the return data will end up in the print data
1065 * buffer. For example if you make sure you never request the device ID
1066 * while you are sending print data, and you don't try to query the
1067 * printer status every couple of milliseconds, you will probably be OK.
1068 */
1069static unsigned int usblp_quirks(__u16 vendor, __u16 product)
1070{
1071 int i;
1072
1073 for (i = 0; quirk_printers[i].vendorId; i++) {
1074 if (vendor == quirk_printers[i].vendorId &&
1075 product == quirk_printers[i].productId)
1076 return quirk_printers[i].quirks;
1077 }
1078 return 0;
1079}
1080
1081static const struct file_operations usblp_fops = {
1082 .owner = THIS_MODULE,
1083 .read = usblp_read,
1084 .write = usblp_write,
1085 .poll = usblp_poll,
1086 .unlocked_ioctl = usblp_ioctl,
1087 .compat_ioctl = usblp_ioctl,
1088 .open = usblp_open,
1089 .release = usblp_release,
1090 .llseek = noop_llseek,
1091};
1092
1093static char *usblp_devnode(const struct device *dev, umode_t *mode)
1094{
1095 return kasprintf(GFP_KERNEL, "usb/%s", dev_name(dev));
1096}
1097
1098static struct usb_class_driver usblp_class = {
1099 .name = "lp%d",
1100 .devnode = usblp_devnode,
1101 .fops = &usblp_fops,
1102 .minor_base = USBLP_MINOR_BASE,
1103};
1104
1105static ssize_t ieee1284_id_show(struct device *dev, struct device_attribute *attr, char *buf)
1106{
1107 struct usb_interface *intf = to_usb_interface(dev);
1108 struct usblp *usblp = usb_get_intfdata(intf);
1109
1110 if (usblp->device_id_string[0] == 0 &&
1111 usblp->device_id_string[1] == 0)
1112 return 0;
1113
1114 return sprintf(buf, "%s", usblp->device_id_string+2);
1115}
1116
1117static DEVICE_ATTR_RO(ieee1284_id);
1118
1119static struct attribute *usblp_attrs[] = {
1120 &dev_attr_ieee1284_id.attr,
1121 NULL,
1122};
1123ATTRIBUTE_GROUPS(usblp);
1124
1125static int usblp_probe(struct usb_interface *intf,
1126 const struct usb_device_id *id)
1127{
1128 struct usb_device *dev = interface_to_usbdev(intf);
1129 struct usblp *usblp;
1130 int protocol;
1131 int retval;
1132
1133 /* Malloc and start initializing usblp structure so we can use it
1134 * directly. */
1135 usblp = kzalloc(sizeof(struct usblp), GFP_KERNEL);
1136 if (!usblp) {
1137 retval = -ENOMEM;
1138 goto abort_ret;
1139 }
1140 usblp->dev = dev;
1141 mutex_init(&usblp->wmut);
1142 mutex_init(&usblp->mut);
1143 spin_lock_init(&usblp->lock);
1144 init_waitqueue_head(&usblp->rwait);
1145 init_waitqueue_head(&usblp->wwait);
1146 init_usb_anchor(&usblp->urbs);
1147 usblp->ifnum = intf->cur_altsetting->desc.bInterfaceNumber;
1148 usblp->intf = usb_get_intf(intf);
1149
1150 /* Malloc device ID string buffer to the largest expected length,
1151 * since we can re-query it on an ioctl and a dynamic string
1152 * could change in length. */
1153 if (!(usblp->device_id_string = kmalloc(USBLP_DEVICE_ID_SIZE, GFP_KERNEL))) {
1154 retval = -ENOMEM;
1155 goto abort;
1156 }
1157
1158 /*
1159 * Allocate read buffer. We somewhat wastefully
1160 * malloc both regardless of bidirectionality, because the
1161 * alternate setting can be changed later via an ioctl.
1162 */
1163 if (!(usblp->readbuf = kmalloc(USBLP_BUF_SIZE_IN, GFP_KERNEL))) {
1164 retval = -ENOMEM;
1165 goto abort;
1166 }
1167
1168 /* Allocate buffer for printer status */
1169 usblp->statusbuf = kmalloc(STATUS_BUF_SIZE, GFP_KERNEL);
1170 if (!usblp->statusbuf) {
1171 retval = -ENOMEM;
1172 goto abort;
1173 }
1174
1175 /* Lookup quirks for this printer. */
1176 usblp->quirks = usblp_quirks(
1177 le16_to_cpu(dev->descriptor.idVendor),
1178 le16_to_cpu(dev->descriptor.idProduct));
1179
1180 /* Analyze and pick initial alternate settings and endpoints. */
1181 protocol = usblp_select_alts(usblp);
1182 if (protocol < 0) {
1183 dev_dbg(&intf->dev,
1184 "incompatible printer-class device 0x%4.4X/0x%4.4X\n",
1185 le16_to_cpu(dev->descriptor.idVendor),
1186 le16_to_cpu(dev->descriptor.idProduct));
1187 retval = -ENODEV;
1188 goto abort;
1189 }
1190
1191 /* Setup the selected alternate setting and endpoints. */
1192 if (usblp_set_protocol(usblp, protocol) < 0) {
1193 retval = -ENODEV; /* ->probe isn't ->ioctl */
1194 goto abort;
1195 }
1196
1197 /* Retrieve and store the device ID string. */
1198 usblp_cache_device_id_string(usblp);
1199
1200#ifdef DEBUG
1201 usblp_check_status(usblp, 0);
1202#endif
1203
1204 usb_set_intfdata(intf, usblp);
1205
1206 usblp->present = 1;
1207
1208 retval = usb_register_dev(intf, &usblp_class);
1209 if (retval) {
1210 dev_err(&intf->dev,
1211 "usblp: Not able to get a minor (base %u, slice default): %d\n",
1212 USBLP_MINOR_BASE, retval);
1213 goto abort_intfdata;
1214 }
1215 usblp->minor = intf->minor;
1216 dev_info(&intf->dev,
1217 "usblp%d: USB %sdirectional printer dev %d if %d alt %d proto %d vid 0x%4.4X pid 0x%4.4X\n",
1218 usblp->minor, usblp->bidir ? "Bi" : "Uni", dev->devnum,
1219 usblp->ifnum,
1220 usblp->protocol[usblp->current_protocol].alt_setting,
1221 usblp->current_protocol,
1222 le16_to_cpu(usblp->dev->descriptor.idVendor),
1223 le16_to_cpu(usblp->dev->descriptor.idProduct));
1224
1225 return 0;
1226
1227abort_intfdata:
1228 usb_set_intfdata(intf, NULL);
1229abort:
1230 kfree(usblp->readbuf);
1231 kfree(usblp->statusbuf);
1232 kfree(usblp->device_id_string);
1233 usb_put_intf(usblp->intf);
1234 kfree(usblp);
1235abort_ret:
1236 return retval;
1237}
1238
1239/*
1240 * We are a "new" style driver with usb_device_id table,
1241 * but our requirements are too intricate for simple match to handle.
1242 *
1243 * The "proto_bias" option may be used to specify the preferred protocol
1244 * for all USB printers (1=USB_CLASS_PRINTER/1/1, 2=USB_CLASS_PRINTER/1/2,
1245 * 3=USB_CLASS_PRINTER/1/3). If the device supports the preferred protocol,
1246 * then we bind to it.
1247 *
1248 * The best interface for us is USB_CLASS_PRINTER/1/2, because it
1249 * is compatible with a stream of characters. If we find it, we bind to it.
1250 *
1251 * Note that the people from hpoj.sourceforge.net need to be able to
1252 * bind to USB_CLASS_PRINTER/1/3 (MLC/1284.4), so we provide them ioctls
1253 * for this purpose.
1254 *
1255 * Failing USB_CLASS_PRINTER/1/2, we look for USB_CLASS_PRINTER/1/3,
1256 * even though it's probably not stream-compatible, because this matches
1257 * the behaviour of the old code.
1258 *
1259 * If nothing else, we bind to USB_CLASS_PRINTER/1/1
1260 * - the unidirectional interface.
1261 */
1262static int usblp_select_alts(struct usblp *usblp)
1263{
1264 struct usb_interface *if_alt;
1265 struct usb_host_interface *ifd;
1266 struct usb_endpoint_descriptor *epwrite, *epread;
1267 int p, i;
1268 int res;
1269
1270 if_alt = usblp->intf;
1271
1272 for (p = 0; p < USBLP_MAX_PROTOCOLS; p++)
1273 usblp->protocol[p].alt_setting = -1;
1274
1275 /* Find out what we have. */
1276 for (i = 0; i < if_alt->num_altsetting; i++) {
1277 ifd = &if_alt->altsetting[i];
1278
1279 if (ifd->desc.bInterfaceClass != USB_CLASS_PRINTER ||
1280 ifd->desc.bInterfaceSubClass != 1)
1281 if (!(usblp->quirks & USBLP_QUIRK_BAD_CLASS))
1282 continue;
1283
1284 if (ifd->desc.bInterfaceProtocol < USBLP_FIRST_PROTOCOL ||
1285 ifd->desc.bInterfaceProtocol > USBLP_LAST_PROTOCOL)
1286 continue;
1287
1288 /* Look for the expected bulk endpoints. */
1289 if (ifd->desc.bInterfaceProtocol > 1) {
1290 res = usb_find_common_endpoints(ifd,
1291 &epread, &epwrite, NULL, NULL);
1292 } else {
1293 epread = NULL;
1294 res = usb_find_bulk_out_endpoint(ifd, &epwrite);
1295 }
1296
1297 /* Ignore buggy hardware without the right endpoints. */
1298 if (res)
1299 continue;
1300
1301 /* Turn off reads for buggy bidirectional printers. */
1302 if (usblp->quirks & USBLP_QUIRK_BIDIR) {
1303 printk(KERN_INFO "usblp%d: Disabling reads from "
1304 "problematic bidirectional printer\n",
1305 usblp->minor);
1306 epread = NULL;
1307 }
1308
1309 usblp->protocol[ifd->desc.bInterfaceProtocol].alt_setting =
1310 ifd->desc.bAlternateSetting;
1311 usblp->protocol[ifd->desc.bInterfaceProtocol].epwrite = epwrite;
1312 usblp->protocol[ifd->desc.bInterfaceProtocol].epread = epread;
1313 }
1314
1315 /* If our requested protocol is supported, then use it. */
1316 if (proto_bias >= USBLP_FIRST_PROTOCOL &&
1317 proto_bias <= USBLP_LAST_PROTOCOL &&
1318 usblp->protocol[proto_bias].alt_setting != -1)
1319 return proto_bias;
1320
1321 /* Ordering is important here. */
1322 if (usblp->protocol[2].alt_setting != -1)
1323 return 2;
1324 if (usblp->protocol[1].alt_setting != -1)
1325 return 1;
1326 if (usblp->protocol[3].alt_setting != -1)
1327 return 3;
1328
1329 /* If nothing is available, then don't bind to this device. */
1330 return -1;
1331}
1332
1333static int usblp_set_protocol(struct usblp *usblp, int protocol)
1334{
1335 int r, alts;
1336
1337 if (protocol < USBLP_FIRST_PROTOCOL || protocol > USBLP_LAST_PROTOCOL)
1338 return -EINVAL;
1339
1340 /* Don't unnecessarily set the interface if there's a single alt. */
1341 if (usblp->intf->num_altsetting > 1) {
1342 alts = usblp->protocol[protocol].alt_setting;
1343 if (alts < 0)
1344 return -EINVAL;
1345 r = usb_set_interface(usblp->dev, usblp->ifnum, alts);
1346 if (r < 0) {
1347 printk(KERN_ERR "usblp: can't set desired altsetting %d on interface %d\n",
1348 alts, usblp->ifnum);
1349 return r;
1350 }
1351 }
1352
1353 usblp->bidir = (usblp->protocol[protocol].epread != NULL);
1354 usblp->current_protocol = protocol;
1355 dev_dbg(&usblp->intf->dev, "usblp%d set protocol %d\n",
1356 usblp->minor, protocol);
1357 return 0;
1358}
1359
1360/* Retrieves and caches device ID string.
1361 * Returns length, including length bytes but not null terminator.
1362 * On error, returns a negative errno value. */
1363static int usblp_cache_device_id_string(struct usblp *usblp)
1364{
1365 int err, length;
1366
1367 err = usblp_get_id(usblp, 0, usblp->device_id_string, USBLP_DEVICE_ID_SIZE - 1);
1368 if (err < 0) {
1369 dev_dbg(&usblp->intf->dev,
1370 "usblp%d: error = %d reading IEEE-1284 Device ID string\n",
1371 usblp->minor, err);
1372 usblp->device_id_string[0] = usblp->device_id_string[1] = '\0';
1373 return -EIO;
1374 }
1375
1376 /* First two bytes are length in big-endian.
1377 * They count themselves, and we copy them into
1378 * the user's buffer. */
1379 length = be16_to_cpu(*((__be16 *)usblp->device_id_string));
1380 if (length < 2)
1381 length = 2;
1382 else if (length >= USBLP_DEVICE_ID_SIZE)
1383 length = USBLP_DEVICE_ID_SIZE - 1;
1384 usblp->device_id_string[length] = '\0';
1385
1386 dev_dbg(&usblp->intf->dev, "usblp%d Device ID string [len=%d]=\"%s\"\n",
1387 usblp->minor, length, &usblp->device_id_string[2]);
1388
1389 return length;
1390}
1391
1392static void usblp_disconnect(struct usb_interface *intf)
1393{
1394 struct usblp *usblp = usb_get_intfdata(intf);
1395
1396 usb_deregister_dev(intf, &usblp_class);
1397
1398 if (!usblp || !usblp->dev) {
1399 dev_err(&intf->dev, "bogus disconnect\n");
1400 BUG();
1401 }
1402
1403 mutex_lock(&usblp_mutex);
1404 mutex_lock(&usblp->mut);
1405 usblp->present = 0;
1406 wake_up(&usblp->wwait);
1407 wake_up(&usblp->rwait);
1408 usb_set_intfdata(intf, NULL);
1409
1410 usblp_unlink_urbs(usblp);
1411 mutex_unlock(&usblp->mut);
1412 usb_poison_anchored_urbs(&usblp->urbs);
1413
1414 if (!usblp->used)
1415 usblp_cleanup(usblp);
1416
1417 mutex_unlock(&usblp_mutex);
1418}
1419
1420static int usblp_suspend(struct usb_interface *intf, pm_message_t message)
1421{
1422 struct usblp *usblp = usb_get_intfdata(intf);
1423
1424 usblp_unlink_urbs(usblp);
1425#if 0 /* XXX Do we want this? What if someone is reading, should we fail? */
1426 /* not strictly necessary, but just in case */
1427 wake_up(&usblp->wwait);
1428 wake_up(&usblp->rwait);
1429#endif
1430
1431 return 0;
1432}
1433
1434static int usblp_resume(struct usb_interface *intf)
1435{
1436 struct usblp *usblp = usb_get_intfdata(intf);
1437 int r;
1438
1439 r = handle_bidir(usblp);
1440
1441 return r;
1442}
1443
1444static const struct usb_device_id usblp_ids[] = {
1445 { USB_DEVICE_INFO(USB_CLASS_PRINTER, 1, 1) },
1446 { USB_DEVICE_INFO(USB_CLASS_PRINTER, 1, 2) },
1447 { USB_DEVICE_INFO(USB_CLASS_PRINTER, 1, 3) },
1448 { USB_INTERFACE_INFO(USB_CLASS_PRINTER, 1, 1) },
1449 { USB_INTERFACE_INFO(USB_CLASS_PRINTER, 1, 2) },
1450 { USB_INTERFACE_INFO(USB_CLASS_PRINTER, 1, 3) },
1451 { USB_DEVICE(0x04b8, 0x0202) }, /* Seiko Epson Receipt Printer M129C */
1452 { } /* Terminating entry */
1453};
1454
1455MODULE_DEVICE_TABLE(usb, usblp_ids);
1456
1457static struct usb_driver usblp_driver = {
1458 .name = "usblp",
1459 .probe = usblp_probe,
1460 .disconnect = usblp_disconnect,
1461 .suspend = usblp_suspend,
1462 .resume = usblp_resume,
1463 .id_table = usblp_ids,
1464 .dev_groups = usblp_groups,
1465 .supports_autosuspend = 1,
1466};
1467
1468module_usb_driver(usblp_driver);
1469
1470MODULE_AUTHOR(DRIVER_AUTHOR);
1471MODULE_DESCRIPTION(DRIVER_DESC);
1472module_param(proto_bias, int, S_IRUGO | S_IWUSR);
1473MODULE_PARM_DESC(proto_bias, "Favourite protocol number");
1474MODULE_LICENSE("GPL");
1/*
2 * usblp.c
3 *
4 * Copyright (c) 1999 Michael Gee <michael@linuxspecific.com>
5 * Copyright (c) 1999 Pavel Machek <pavel@ucw.cz>
6 * Copyright (c) 2000 Randy Dunlap <rdunlap@xenotime.net>
7 * Copyright (c) 2000 Vojtech Pavlik <vojtech@suse.cz>
8 # Copyright (c) 2001 Pete Zaitcev <zaitcev@redhat.com>
9 # Copyright (c) 2001 David Paschal <paschal@rcsis.com>
10 * Copyright (c) 2006 Oliver Neukum <oliver@neukum.name>
11 *
12 * USB Printer Device Class driver for USB printers and printer cables
13 *
14 * Sponsored by SuSE
15 *
16 * ChangeLog:
17 * v0.1 - thorough cleaning, URBification, almost a rewrite
18 * v0.2 - some more cleanups
19 * v0.3 - cleaner again, waitqueue fixes
20 * v0.4 - fixes in unidirectional mode
21 * v0.5 - add DEVICE_ID string support
22 * v0.6 - never time out
23 * v0.7 - fixed bulk-IN read and poll (David Paschal)
24 * v0.8 - add devfs support
25 * v0.9 - fix unplug-while-open paths
26 * v0.10- remove sleep_on, fix error on oom (oliver@neukum.org)
27 * v0.11 - add proto_bias option (Pete Zaitcev)
28 * v0.12 - add hpoj.sourceforge.net ioctls (David Paschal)
29 * v0.13 - alloc space for statusbuf (<status> not on stack);
30 * use usb_alloc_coherent() for read buf & write buf;
31 * none - Maintained in Linux kernel after v0.13
32 */
33
34/*
35 * This program is free software; you can redistribute it and/or modify
36 * it under the terms of the GNU General Public License as published by
37 * the Free Software Foundation; either version 2 of the License, or
38 * (at your option) any later version.
39 *
40 * This program is distributed in the hope that it will be useful,
41 * but WITHOUT ANY WARRANTY; without even the implied warranty of
42 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
43 * GNU General Public License for more details.
44 *
45 * You should have received a copy of the GNU General Public License
46 * along with this program; if not, write to the Free Software
47 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
48 */
49
50#include <linux/module.h>
51#include <linux/kernel.h>
52#include <linux/sched.h>
53#include <linux/signal.h>
54#include <linux/poll.h>
55#include <linux/init.h>
56#include <linux/slab.h>
57#include <linux/lp.h>
58#include <linux/mutex.h>
59#undef DEBUG
60#include <linux/usb.h>
61#include <linux/ratelimit.h>
62
63/*
64 * Version Information
65 */
66#define DRIVER_AUTHOR "Michael Gee, Pavel Machek, Vojtech Pavlik, Randy Dunlap, Pete Zaitcev, David Paschal"
67#define DRIVER_DESC "USB Printer Device Class driver"
68
69#define USBLP_BUF_SIZE 8192
70#define USBLP_BUF_SIZE_IN 1024
71#define USBLP_DEVICE_ID_SIZE 1024
72
73/* ioctls: */
74#define IOCNR_GET_DEVICE_ID 1
75#define IOCNR_GET_PROTOCOLS 2
76#define IOCNR_SET_PROTOCOL 3
77#define IOCNR_HP_SET_CHANNEL 4
78#define IOCNR_GET_BUS_ADDRESS 5
79#define IOCNR_GET_VID_PID 6
80#define IOCNR_SOFT_RESET 7
81/* Get device_id string: */
82#define LPIOC_GET_DEVICE_ID(len) _IOC(_IOC_READ, 'P', IOCNR_GET_DEVICE_ID, len)
83/* The following ioctls were added for http://hpoj.sourceforge.net: */
84/* Get two-int array:
85 * [0]=current protocol (1=7/1/1, 2=7/1/2, 3=7/1/3),
86 * [1]=supported protocol mask (mask&(1<<n)!=0 means 7/1/n supported): */
87#define LPIOC_GET_PROTOCOLS(len) _IOC(_IOC_READ, 'P', IOCNR_GET_PROTOCOLS, len)
88/* Set protocol (arg: 1=7/1/1, 2=7/1/2, 3=7/1/3): */
89#define LPIOC_SET_PROTOCOL _IOC(_IOC_WRITE, 'P', IOCNR_SET_PROTOCOL, 0)
90/* Set channel number (HP Vendor-specific command): */
91#define LPIOC_HP_SET_CHANNEL _IOC(_IOC_WRITE, 'P', IOCNR_HP_SET_CHANNEL, 0)
92/* Get two-int array: [0]=bus number, [1]=device address: */
93#define LPIOC_GET_BUS_ADDRESS(len) _IOC(_IOC_READ, 'P', IOCNR_GET_BUS_ADDRESS, len)
94/* Get two-int array: [0]=vendor ID, [1]=product ID: */
95#define LPIOC_GET_VID_PID(len) _IOC(_IOC_READ, 'P', IOCNR_GET_VID_PID, len)
96/* Perform class specific soft reset */
97#define LPIOC_SOFT_RESET _IOC(_IOC_NONE, 'P', IOCNR_SOFT_RESET, 0);
98
99/*
100 * A DEVICE_ID string may include the printer's serial number.
101 * It should end with a semi-colon (';').
102 * An example from an HP 970C DeskJet printer is (this is one long string,
103 * with the serial number changed):
104MFG:HEWLETT-PACKARD;MDL:DESKJET 970C;CMD:MLC,PCL,PML;CLASS:PRINTER;DESCRIPTION:Hewlett-Packard DeskJet 970C;SERN:US970CSEPROF;VSTATUS:$HB0$NC0,ff,DN,IDLE,CUT,K1,C0,DP,NR,KP000,CP027;VP:0800,FL,B0;VJ: ;
105 */
106
107/*
108 * USB Printer Requests
109 */
110
111#define USBLP_REQ_GET_ID 0x00
112#define USBLP_REQ_GET_STATUS 0x01
113#define USBLP_REQ_RESET 0x02
114#define USBLP_REQ_HP_CHANNEL_CHANGE_REQUEST 0x00 /* HP Vendor-specific */
115
116#define USBLP_MINORS 16
117#define USBLP_MINOR_BASE 0
118
119#define USBLP_CTL_TIMEOUT 5000 /* 5 seconds */
120
121#define USBLP_FIRST_PROTOCOL 1
122#define USBLP_LAST_PROTOCOL 3
123#define USBLP_MAX_PROTOCOLS (USBLP_LAST_PROTOCOL+1)
124
125/*
126 * some arbitrary status buffer size;
127 * need a status buffer that is allocated via kmalloc(), not on stack
128 */
129#define STATUS_BUF_SIZE 8
130
131/*
132 * Locks down the locking order:
133 * ->wmut locks wstatus.
134 * ->mut locks the whole usblp, except [rw]complete, and thus, by indirection,
135 * [rw]status. We only touch status when we know the side idle.
136 * ->lock locks what interrupt accesses.
137 */
138struct usblp {
139 struct usb_device *dev; /* USB device */
140 struct mutex wmut;
141 struct mutex mut;
142 spinlock_t lock; /* locks rcomplete, wcomplete */
143 char *readbuf; /* read transfer_buffer */
144 char *statusbuf; /* status transfer_buffer */
145 struct usb_anchor urbs;
146 wait_queue_head_t rwait, wwait;
147 int readcount; /* Counter for reads */
148 int ifnum; /* Interface number */
149 struct usb_interface *intf; /* The interface */
150 /* Alternate-setting numbers and endpoints for each protocol
151 * (7/1/{index=1,2,3}) that the device supports: */
152 struct {
153 int alt_setting;
154 struct usb_endpoint_descriptor *epwrite;
155 struct usb_endpoint_descriptor *epread;
156 } protocol[USBLP_MAX_PROTOCOLS];
157 int current_protocol;
158 int minor; /* minor number of device */
159 int wcomplete, rcomplete;
160 int wstatus; /* bytes written or error */
161 int rstatus; /* bytes ready or error */
162 unsigned int quirks; /* quirks flags */
163 unsigned int flags; /* mode flags */
164 unsigned char used; /* True if open */
165 unsigned char present; /* True if not disconnected */
166 unsigned char bidir; /* interface is bidirectional */
167 unsigned char no_paper; /* Paper Out happened */
168 unsigned char *device_id_string; /* IEEE 1284 DEVICE ID string (ptr) */
169 /* first 2 bytes are (big-endian) length */
170};
171
172#ifdef DEBUG
173static void usblp_dump(struct usblp *usblp)
174{
175 struct device *dev = &usblp->intf->dev;
176 int p;
177
178 dev_dbg(dev, "usblp=0x%p\n", usblp);
179 dev_dbg(dev, "dev=0x%p\n", usblp->dev);
180 dev_dbg(dev, "present=%d\n", usblp->present);
181 dev_dbg(dev, "readbuf=0x%p\n", usblp->readbuf);
182 dev_dbg(dev, "readcount=%d\n", usblp->readcount);
183 dev_dbg(dev, "ifnum=%d\n", usblp->ifnum);
184 for (p = USBLP_FIRST_PROTOCOL; p <= USBLP_LAST_PROTOCOL; p++) {
185 dev_dbg(dev, "protocol[%d].alt_setting=%d\n", p,
186 usblp->protocol[p].alt_setting);
187 dev_dbg(dev, "protocol[%d].epwrite=%p\n", p,
188 usblp->protocol[p].epwrite);
189 dev_dbg(dev, "protocol[%d].epread=%p\n", p,
190 usblp->protocol[p].epread);
191 }
192 dev_dbg(dev, "current_protocol=%d\n", usblp->current_protocol);
193 dev_dbg(dev, "minor=%d\n", usblp->minor);
194 dev_dbg(dev, "wstatus=%d\n", usblp->wstatus);
195 dev_dbg(dev, "rstatus=%d\n", usblp->rstatus);
196 dev_dbg(dev, "quirks=%d\n", usblp->quirks);
197 dev_dbg(dev, "used=%d\n", usblp->used);
198 dev_dbg(dev, "bidir=%d\n", usblp->bidir);
199 dev_dbg(dev, "device_id_string=\"%s\"\n",
200 usblp->device_id_string ?
201 usblp->device_id_string + 2 :
202 (unsigned char *)"(null)");
203}
204#endif
205
206/* Quirks: various printer quirks are handled by this table & its flags. */
207
208struct quirk_printer_struct {
209 __u16 vendorId;
210 __u16 productId;
211 unsigned int quirks;
212};
213
214#define USBLP_QUIRK_BIDIR 0x1 /* reports bidir but requires unidirectional mode (no INs/reads) */
215#define USBLP_QUIRK_USB_INIT 0x2 /* needs vendor USB init string */
216#define USBLP_QUIRK_BAD_CLASS 0x4 /* descriptor uses vendor-specific Class or SubClass */
217
218static const struct quirk_printer_struct quirk_printers[] = {
219 { 0x03f0, 0x0004, USBLP_QUIRK_BIDIR }, /* HP DeskJet 895C */
220 { 0x03f0, 0x0104, USBLP_QUIRK_BIDIR }, /* HP DeskJet 880C */
221 { 0x03f0, 0x0204, USBLP_QUIRK_BIDIR }, /* HP DeskJet 815C */
222 { 0x03f0, 0x0304, USBLP_QUIRK_BIDIR }, /* HP DeskJet 810C/812C */
223 { 0x03f0, 0x0404, USBLP_QUIRK_BIDIR }, /* HP DeskJet 830C */
224 { 0x03f0, 0x0504, USBLP_QUIRK_BIDIR }, /* HP DeskJet 885C */
225 { 0x03f0, 0x0604, USBLP_QUIRK_BIDIR }, /* HP DeskJet 840C */
226 { 0x03f0, 0x0804, USBLP_QUIRK_BIDIR }, /* HP DeskJet 816C */
227 { 0x03f0, 0x1104, USBLP_QUIRK_BIDIR }, /* HP Deskjet 959C */
228 { 0x0409, 0xefbe, USBLP_QUIRK_BIDIR }, /* NEC Picty900 (HP OEM) */
229 { 0x0409, 0xbef4, USBLP_QUIRK_BIDIR }, /* NEC Picty760 (HP OEM) */
230 { 0x0409, 0xf0be, USBLP_QUIRK_BIDIR }, /* NEC Picty920 (HP OEM) */
231 { 0x0409, 0xf1be, USBLP_QUIRK_BIDIR }, /* NEC Picty800 (HP OEM) */
232 { 0x0482, 0x0010, USBLP_QUIRK_BIDIR }, /* Kyocera Mita FS 820, by zut <kernel@zut.de> */
233 { 0x04f9, 0x000d, USBLP_QUIRK_BIDIR }, /* Brother Industries, Ltd HL-1440 Laser Printer */
234 { 0x04b8, 0x0202, USBLP_QUIRK_BAD_CLASS }, /* Seiko Epson Receipt Printer M129C */
235 { 0, 0 }
236};
237
238static int usblp_wwait(struct usblp *usblp, int nonblock);
239static int usblp_wtest(struct usblp *usblp, int nonblock);
240static int usblp_rwait_and_lock(struct usblp *usblp, int nonblock);
241static int usblp_rtest(struct usblp *usblp, int nonblock);
242static int usblp_submit_read(struct usblp *usblp);
243static int usblp_select_alts(struct usblp *usblp);
244static int usblp_set_protocol(struct usblp *usblp, int protocol);
245static int usblp_cache_device_id_string(struct usblp *usblp);
246
247/* forward reference to make our lives easier */
248static struct usb_driver usblp_driver;
249static DEFINE_MUTEX(usblp_mutex); /* locks the existence of usblp's */
250
251/*
252 * Functions for usblp control messages.
253 */
254
255static int usblp_ctrl_msg(struct usblp *usblp, int request, int type, int dir, int recip, int value, void *buf, int len)
256{
257 int retval;
258 int index = usblp->ifnum;
259
260 /* High byte has the interface index.
261 Low byte has the alternate setting.
262 */
263 if ((request == USBLP_REQ_GET_ID) && (type == USB_TYPE_CLASS))
264 index = (usblp->ifnum<<8)|usblp->protocol[usblp->current_protocol].alt_setting;
265
266 retval = usb_control_msg(usblp->dev,
267 dir ? usb_rcvctrlpipe(usblp->dev, 0) : usb_sndctrlpipe(usblp->dev, 0),
268 request, type | dir | recip, value, index, buf, len, USBLP_CTL_TIMEOUT);
269 dev_dbg(&usblp->intf->dev,
270 "usblp_control_msg: rq: 0x%02x dir: %d recip: %d value: %d idx: %d len: %#x result: %d\n",
271 request, !!dir, recip, value, index, len, retval);
272 return retval < 0 ? retval : 0;
273}
274
275#define usblp_read_status(usblp, status)\
276 usblp_ctrl_msg(usblp, USBLP_REQ_GET_STATUS, USB_TYPE_CLASS, USB_DIR_IN, USB_RECIP_INTERFACE, 0, status, 1)
277#define usblp_get_id(usblp, config, id, maxlen)\
278 usblp_ctrl_msg(usblp, USBLP_REQ_GET_ID, USB_TYPE_CLASS, USB_DIR_IN, USB_RECIP_INTERFACE, config, id, maxlen)
279#define usblp_reset(usblp)\
280 usblp_ctrl_msg(usblp, USBLP_REQ_RESET, USB_TYPE_CLASS, USB_DIR_OUT, USB_RECIP_OTHER, 0, NULL, 0)
281
282#define usblp_hp_channel_change_request(usblp, channel, buffer) \
283 usblp_ctrl_msg(usblp, USBLP_REQ_HP_CHANNEL_CHANGE_REQUEST, USB_TYPE_VENDOR, USB_DIR_IN, USB_RECIP_INTERFACE, channel, buffer, 1)
284
285/*
286 * See the description for usblp_select_alts() below for the usage
287 * explanation. Look into your /proc/bus/usb/devices and dmesg in
288 * case of any trouble.
289 */
290static int proto_bias = -1;
291
292/*
293 * URB callback.
294 */
295
296static void usblp_bulk_read(struct urb *urb)
297{
298 struct usblp *usblp = urb->context;
299 int status = urb->status;
300
301 if (usblp->present && usblp->used) {
302 if (status)
303 printk(KERN_WARNING "usblp%d: "
304 "nonzero read bulk status received: %d\n",
305 usblp->minor, status);
306 }
307 spin_lock(&usblp->lock);
308 if (status < 0)
309 usblp->rstatus = status;
310 else
311 usblp->rstatus = urb->actual_length;
312 usblp->rcomplete = 1;
313 wake_up(&usblp->rwait);
314 spin_unlock(&usblp->lock);
315
316 usb_free_urb(urb);
317}
318
319static void usblp_bulk_write(struct urb *urb)
320{
321 struct usblp *usblp = urb->context;
322 int status = urb->status;
323
324 if (usblp->present && usblp->used) {
325 if (status)
326 printk(KERN_WARNING "usblp%d: "
327 "nonzero write bulk status received: %d\n",
328 usblp->minor, status);
329 }
330 spin_lock(&usblp->lock);
331 if (status < 0)
332 usblp->wstatus = status;
333 else
334 usblp->wstatus = urb->actual_length;
335 usblp->no_paper = 0;
336 usblp->wcomplete = 1;
337 wake_up(&usblp->wwait);
338 spin_unlock(&usblp->lock);
339
340 usb_free_urb(urb);
341}
342
343/*
344 * Get and print printer errors.
345 */
346
347static const char *usblp_messages[] = { "ok", "out of paper", "off-line", "on fire" };
348
349static int usblp_check_status(struct usblp *usblp, int err)
350{
351 unsigned char status, newerr = 0;
352 int error;
353
354 mutex_lock(&usblp->mut);
355 if ((error = usblp_read_status(usblp, usblp->statusbuf)) < 0) {
356 mutex_unlock(&usblp->mut);
357 printk_ratelimited(KERN_ERR
358 "usblp%d: error %d reading printer status\n",
359 usblp->minor, error);
360 return 0;
361 }
362 status = *usblp->statusbuf;
363 mutex_unlock(&usblp->mut);
364
365 if (~status & LP_PERRORP)
366 newerr = 3;
367 if (status & LP_POUTPA)
368 newerr = 1;
369 if (~status & LP_PSELECD)
370 newerr = 2;
371
372 if (newerr != err) {
373 printk(KERN_INFO "usblp%d: %s\n",
374 usblp->minor, usblp_messages[newerr]);
375 }
376
377 return newerr;
378}
379
380static int handle_bidir(struct usblp *usblp)
381{
382 if (usblp->bidir && usblp->used) {
383 if (usblp_submit_read(usblp) < 0)
384 return -EIO;
385 }
386 return 0;
387}
388
389/*
390 * File op functions.
391 */
392
393static int usblp_open(struct inode *inode, struct file *file)
394{
395 int minor = iminor(inode);
396 struct usblp *usblp;
397 struct usb_interface *intf;
398 int retval;
399
400 if (minor < 0)
401 return -ENODEV;
402
403 mutex_lock(&usblp_mutex);
404
405 retval = -ENODEV;
406 intf = usb_find_interface(&usblp_driver, minor);
407 if (!intf)
408 goto out;
409 usblp = usb_get_intfdata(intf);
410 if (!usblp || !usblp->dev || !usblp->present)
411 goto out;
412
413 retval = -EBUSY;
414 if (usblp->used)
415 goto out;
416
417 /*
418 * We do not implement LP_ABORTOPEN/LPABORTOPEN for two reasons:
419 * - We do not want persistent state which close(2) does not clear
420 * - It is not used anyway, according to CUPS people
421 */
422
423 retval = usb_autopm_get_interface(intf);
424 if (retval < 0)
425 goto out;
426 usblp->used = 1;
427 file->private_data = usblp;
428
429 usblp->wcomplete = 1; /* we begin writeable */
430 usblp->wstatus = 0;
431 usblp->rcomplete = 0;
432
433 if (handle_bidir(usblp) < 0) {
434 usb_autopm_put_interface(intf);
435 usblp->used = 0;
436 file->private_data = NULL;
437 retval = -EIO;
438 }
439out:
440 mutex_unlock(&usblp_mutex);
441 return retval;
442}
443
444static void usblp_cleanup(struct usblp *usblp)
445{
446 printk(KERN_INFO "usblp%d: removed\n", usblp->minor);
447
448 kfree(usblp->readbuf);
449 kfree(usblp->device_id_string);
450 kfree(usblp->statusbuf);
451 kfree(usblp);
452}
453
454static void usblp_unlink_urbs(struct usblp *usblp)
455{
456 usb_kill_anchored_urbs(&usblp->urbs);
457}
458
459static int usblp_release(struct inode *inode, struct file *file)
460{
461 struct usblp *usblp = file->private_data;
462
463 usblp->flags &= ~LP_ABORT;
464
465 mutex_lock(&usblp_mutex);
466 usblp->used = 0;
467 if (usblp->present) {
468 usblp_unlink_urbs(usblp);
469 usb_autopm_put_interface(usblp->intf);
470 } else /* finish cleanup from disconnect */
471 usblp_cleanup(usblp);
472 mutex_unlock(&usblp_mutex);
473 return 0;
474}
475
476/* No kernel lock - fine */
477static unsigned int usblp_poll(struct file *file, struct poll_table_struct *wait)
478{
479 int ret;
480 unsigned long flags;
481
482 struct usblp *usblp = file->private_data;
483 /* Should we check file->f_mode & FMODE_WRITE before poll_wait()? */
484 poll_wait(file, &usblp->rwait, wait);
485 poll_wait(file, &usblp->wwait, wait);
486 spin_lock_irqsave(&usblp->lock, flags);
487 ret = ((usblp->bidir && usblp->rcomplete) ? POLLIN | POLLRDNORM : 0) |
488 ((usblp->no_paper || usblp->wcomplete) ? POLLOUT | POLLWRNORM : 0);
489 spin_unlock_irqrestore(&usblp->lock, flags);
490 return ret;
491}
492
493static long usblp_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
494{
495 struct usblp *usblp = file->private_data;
496 int length, err, i;
497 unsigned char newChannel;
498 int status;
499 int twoints[2];
500 int retval = 0;
501
502 mutex_lock(&usblp->mut);
503 if (!usblp->present) {
504 retval = -ENODEV;
505 goto done;
506 }
507
508 dev_dbg(&usblp->intf->dev,
509 "usblp_ioctl: cmd=0x%x (%c nr=%d len=%d dir=%d)\n", cmd,
510 _IOC_TYPE(cmd), _IOC_NR(cmd), _IOC_SIZE(cmd), _IOC_DIR(cmd));
511
512 if (_IOC_TYPE(cmd) == 'P') /* new-style ioctl number */
513
514 switch (_IOC_NR(cmd)) {
515
516 case IOCNR_GET_DEVICE_ID: /* get the DEVICE_ID string */
517 if (_IOC_DIR(cmd) != _IOC_READ) {
518 retval = -EINVAL;
519 goto done;
520 }
521
522 length = usblp_cache_device_id_string(usblp);
523 if (length < 0) {
524 retval = length;
525 goto done;
526 }
527 if (length > _IOC_SIZE(cmd))
528 length = _IOC_SIZE(cmd); /* truncate */
529
530 if (copy_to_user((void __user *) arg,
531 usblp->device_id_string,
532 (unsigned long) length)) {
533 retval = -EFAULT;
534 goto done;
535 }
536
537 break;
538
539 case IOCNR_GET_PROTOCOLS:
540 if (_IOC_DIR(cmd) != _IOC_READ ||
541 _IOC_SIZE(cmd) < sizeof(twoints)) {
542 retval = -EINVAL;
543 goto done;
544 }
545
546 twoints[0] = usblp->current_protocol;
547 twoints[1] = 0;
548 for (i = USBLP_FIRST_PROTOCOL;
549 i <= USBLP_LAST_PROTOCOL; i++) {
550 if (usblp->protocol[i].alt_setting >= 0)
551 twoints[1] |= (1<<i);
552 }
553
554 if (copy_to_user((void __user *)arg,
555 (unsigned char *)twoints,
556 sizeof(twoints))) {
557 retval = -EFAULT;
558 goto done;
559 }
560
561 break;
562
563 case IOCNR_SET_PROTOCOL:
564 if (_IOC_DIR(cmd) != _IOC_WRITE) {
565 retval = -EINVAL;
566 goto done;
567 }
568
569#ifdef DEBUG
570 if (arg == -10) {
571 usblp_dump(usblp);
572 break;
573 }
574#endif
575
576 usblp_unlink_urbs(usblp);
577 retval = usblp_set_protocol(usblp, arg);
578 if (retval < 0) {
579 usblp_set_protocol(usblp,
580 usblp->current_protocol);
581 }
582 break;
583
584 case IOCNR_HP_SET_CHANNEL:
585 if (_IOC_DIR(cmd) != _IOC_WRITE ||
586 le16_to_cpu(usblp->dev->descriptor.idVendor) != 0x03F0 ||
587 usblp->quirks & USBLP_QUIRK_BIDIR) {
588 retval = -EINVAL;
589 goto done;
590 }
591
592 err = usblp_hp_channel_change_request(usblp,
593 arg, &newChannel);
594 if (err < 0) {
595 dev_err(&usblp->dev->dev,
596 "usblp%d: error = %d setting "
597 "HP channel\n",
598 usblp->minor, err);
599 retval = -EIO;
600 goto done;
601 }
602
603 dev_dbg(&usblp->intf->dev,
604 "usblp%d requested/got HP channel %ld/%d\n",
605 usblp->minor, arg, newChannel);
606 break;
607
608 case IOCNR_GET_BUS_ADDRESS:
609 if (_IOC_DIR(cmd) != _IOC_READ ||
610 _IOC_SIZE(cmd) < sizeof(twoints)) {
611 retval = -EINVAL;
612 goto done;
613 }
614
615 twoints[0] = usblp->dev->bus->busnum;
616 twoints[1] = usblp->dev->devnum;
617 if (copy_to_user((void __user *)arg,
618 (unsigned char *)twoints,
619 sizeof(twoints))) {
620 retval = -EFAULT;
621 goto done;
622 }
623
624 dev_dbg(&usblp->intf->dev,
625 "usblp%d is bus=%d, device=%d\n",
626 usblp->minor, twoints[0], twoints[1]);
627 break;
628
629 case IOCNR_GET_VID_PID:
630 if (_IOC_DIR(cmd) != _IOC_READ ||
631 _IOC_SIZE(cmd) < sizeof(twoints)) {
632 retval = -EINVAL;
633 goto done;
634 }
635
636 twoints[0] = le16_to_cpu(usblp->dev->descriptor.idVendor);
637 twoints[1] = le16_to_cpu(usblp->dev->descriptor.idProduct);
638 if (copy_to_user((void __user *)arg,
639 (unsigned char *)twoints,
640 sizeof(twoints))) {
641 retval = -EFAULT;
642 goto done;
643 }
644
645 dev_dbg(&usblp->intf->dev,
646 "usblp%d is VID=0x%4.4X, PID=0x%4.4X\n",
647 usblp->minor, twoints[0], twoints[1]);
648 break;
649
650 case IOCNR_SOFT_RESET:
651 if (_IOC_DIR(cmd) != _IOC_NONE) {
652 retval = -EINVAL;
653 goto done;
654 }
655 retval = usblp_reset(usblp);
656 break;
657 default:
658 retval = -ENOTTY;
659 }
660 else /* old-style ioctl value */
661 switch (cmd) {
662
663 case LPGETSTATUS:
664 if ((retval = usblp_read_status(usblp, usblp->statusbuf))) {
665 printk_ratelimited(KERN_ERR "usblp%d:"
666 "failed reading printer status (%d)\n",
667 usblp->minor, retval);
668 retval = -EIO;
669 goto done;
670 }
671 status = *usblp->statusbuf;
672 if (copy_to_user((void __user *)arg, &status, sizeof(int)))
673 retval = -EFAULT;
674 break;
675
676 case LPABORT:
677 if (arg)
678 usblp->flags |= LP_ABORT;
679 else
680 usblp->flags &= ~LP_ABORT;
681 break;
682
683 default:
684 retval = -ENOTTY;
685 }
686
687done:
688 mutex_unlock(&usblp->mut);
689 return retval;
690}
691
692static struct urb *usblp_new_writeurb(struct usblp *usblp, int transfer_length)
693{
694 struct urb *urb;
695 char *writebuf;
696
697 if ((writebuf = kmalloc(transfer_length, GFP_KERNEL)) == NULL)
698 return NULL;
699 if ((urb = usb_alloc_urb(0, GFP_KERNEL)) == NULL) {
700 kfree(writebuf);
701 return NULL;
702 }
703
704 usb_fill_bulk_urb(urb, usblp->dev,
705 usb_sndbulkpipe(usblp->dev,
706 usblp->protocol[usblp->current_protocol].epwrite->bEndpointAddress),
707 writebuf, transfer_length, usblp_bulk_write, usblp);
708 urb->transfer_flags |= URB_FREE_BUFFER;
709
710 return urb;
711}
712
713static ssize_t usblp_write(struct file *file, const char __user *buffer, size_t count, loff_t *ppos)
714{
715 struct usblp *usblp = file->private_data;
716 struct urb *writeurb;
717 int rv;
718 int transfer_length;
719 ssize_t writecount = 0;
720
721 if (mutex_lock_interruptible(&usblp->wmut)) {
722 rv = -EINTR;
723 goto raise_biglock;
724 }
725 if ((rv = usblp_wwait(usblp, !!(file->f_flags & O_NONBLOCK))) < 0)
726 goto raise_wait;
727
728 while (writecount < count) {
729 /*
730 * Step 1: Submit next block.
731 */
732 if ((transfer_length = count - writecount) > USBLP_BUF_SIZE)
733 transfer_length = USBLP_BUF_SIZE;
734
735 rv = -ENOMEM;
736 if ((writeurb = usblp_new_writeurb(usblp, transfer_length)) == NULL)
737 goto raise_urb;
738 usb_anchor_urb(writeurb, &usblp->urbs);
739
740 if (copy_from_user(writeurb->transfer_buffer,
741 buffer + writecount, transfer_length)) {
742 rv = -EFAULT;
743 goto raise_badaddr;
744 }
745
746 spin_lock_irq(&usblp->lock);
747 usblp->wcomplete = 0;
748 spin_unlock_irq(&usblp->lock);
749 if ((rv = usb_submit_urb(writeurb, GFP_KERNEL)) < 0) {
750 usblp->wstatus = 0;
751 spin_lock_irq(&usblp->lock);
752 usblp->no_paper = 0;
753 usblp->wcomplete = 1;
754 wake_up(&usblp->wwait);
755 spin_unlock_irq(&usblp->lock);
756 if (rv != -ENOMEM)
757 rv = -EIO;
758 goto raise_submit;
759 }
760
761 /*
762 * Step 2: Wait for transfer to end, collect results.
763 */
764 rv = usblp_wwait(usblp, !!(file->f_flags&O_NONBLOCK));
765 if (rv < 0) {
766 if (rv == -EAGAIN) {
767 /* Presume that it's going to complete well. */
768 writecount += transfer_length;
769 }
770 if (rv == -ENOSPC) {
771 spin_lock_irq(&usblp->lock);
772 usblp->no_paper = 1; /* Mark for poll(2) */
773 spin_unlock_irq(&usblp->lock);
774 writecount += transfer_length;
775 }
776 /* Leave URB dangling, to be cleaned on close. */
777 goto collect_error;
778 }
779
780 if (usblp->wstatus < 0) {
781 rv = -EIO;
782 goto collect_error;
783 }
784 /*
785 * This is critical: it must be our URB, not other writer's.
786 * The wmut exists mainly to cover us here.
787 */
788 writecount += usblp->wstatus;
789 }
790
791 mutex_unlock(&usblp->wmut);
792 return writecount;
793
794raise_submit:
795raise_badaddr:
796 usb_unanchor_urb(writeurb);
797 usb_free_urb(writeurb);
798raise_urb:
799raise_wait:
800collect_error: /* Out of raise sequence */
801 mutex_unlock(&usblp->wmut);
802raise_biglock:
803 return writecount ? writecount : rv;
804}
805
806/*
807 * Notice that we fail to restart in a few cases: on EFAULT, on restart
808 * error, etc. This is the historical behaviour. In all such cases we return
809 * EIO, and applications loop in order to get the new read going.
810 */
811static ssize_t usblp_read(struct file *file, char __user *buffer, size_t len, loff_t *ppos)
812{
813 struct usblp *usblp = file->private_data;
814 ssize_t count;
815 ssize_t avail;
816 int rv;
817
818 if (!usblp->bidir)
819 return -EINVAL;
820
821 rv = usblp_rwait_and_lock(usblp, !!(file->f_flags & O_NONBLOCK));
822 if (rv < 0)
823 return rv;
824
825 if ((avail = usblp->rstatus) < 0) {
826 printk(KERN_ERR "usblp%d: error %d reading from printer\n",
827 usblp->minor, (int)avail);
828 usblp_submit_read(usblp);
829 count = -EIO;
830 goto done;
831 }
832
833 count = len < avail - usblp->readcount ? len : avail - usblp->readcount;
834 if (count != 0 &&
835 copy_to_user(buffer, usblp->readbuf + usblp->readcount, count)) {
836 count = -EFAULT;
837 goto done;
838 }
839
840 if ((usblp->readcount += count) == avail) {
841 if (usblp_submit_read(usblp) < 0) {
842 /* We don't want to leak USB return codes into errno. */
843 if (count == 0)
844 count = -EIO;
845 goto done;
846 }
847 }
848
849done:
850 mutex_unlock(&usblp->mut);
851 return count;
852}
853
854/*
855 * Wait for the write path to come idle.
856 * This is called under the ->wmut, so the idle path stays idle.
857 *
858 * Our write path has a peculiar property: it does not buffer like a tty,
859 * but waits for the write to succeed. This allows our ->release to bug out
860 * without waiting for writes to drain. But it obviously does not work
861 * when O_NONBLOCK is set. So, applications setting O_NONBLOCK must use
862 * select(2) or poll(2) to wait for the buffer to drain before closing.
863 * Alternatively, set blocking mode with fcntl and issue a zero-size write.
864 */
865static int usblp_wwait(struct usblp *usblp, int nonblock)
866{
867 DECLARE_WAITQUEUE(waita, current);
868 int rc;
869 int err = 0;
870
871 add_wait_queue(&usblp->wwait, &waita);
872 for (;;) {
873 set_current_state(TASK_INTERRUPTIBLE);
874 if (mutex_lock_interruptible(&usblp->mut)) {
875 rc = -EINTR;
876 break;
877 }
878 rc = usblp_wtest(usblp, nonblock);
879 mutex_unlock(&usblp->mut);
880 if (rc <= 0)
881 break;
882
883 if (schedule_timeout(msecs_to_jiffies(1500)) == 0) {
884 if (usblp->flags & LP_ABORT) {
885 err = usblp_check_status(usblp, err);
886 if (err == 1) { /* Paper out */
887 rc = -ENOSPC;
888 break;
889 }
890 } else {
891 /* Prod the printer, Gentoo#251237. */
892 mutex_lock(&usblp->mut);
893 usblp_read_status(usblp, usblp->statusbuf);
894 mutex_unlock(&usblp->mut);
895 }
896 }
897 }
898 set_current_state(TASK_RUNNING);
899 remove_wait_queue(&usblp->wwait, &waita);
900 return rc;
901}
902
903static int usblp_wtest(struct usblp *usblp, int nonblock)
904{
905 unsigned long flags;
906
907 if (!usblp->present)
908 return -ENODEV;
909 if (signal_pending(current))
910 return -EINTR;
911 spin_lock_irqsave(&usblp->lock, flags);
912 if (usblp->wcomplete) {
913 spin_unlock_irqrestore(&usblp->lock, flags);
914 return 0;
915 }
916 spin_unlock_irqrestore(&usblp->lock, flags);
917 if (nonblock)
918 return -EAGAIN;
919 return 1;
920}
921
922/*
923 * Wait for read bytes to become available. This probably should have been
924 * called usblp_r_lock_and_wait(), because we lock first. But it's a traditional
925 * name for functions which lock and return.
926 *
927 * We do not use wait_event_interruptible because it makes locking iffy.
928 */
929static int usblp_rwait_and_lock(struct usblp *usblp, int nonblock)
930{
931 DECLARE_WAITQUEUE(waita, current);
932 int rc;
933
934 add_wait_queue(&usblp->rwait, &waita);
935 for (;;) {
936 if (mutex_lock_interruptible(&usblp->mut)) {
937 rc = -EINTR;
938 break;
939 }
940 set_current_state(TASK_INTERRUPTIBLE);
941 if ((rc = usblp_rtest(usblp, nonblock)) < 0) {
942 mutex_unlock(&usblp->mut);
943 break;
944 }
945 if (rc == 0) /* Keep it locked */
946 break;
947 mutex_unlock(&usblp->mut);
948 schedule();
949 }
950 set_current_state(TASK_RUNNING);
951 remove_wait_queue(&usblp->rwait, &waita);
952 return rc;
953}
954
955static int usblp_rtest(struct usblp *usblp, int nonblock)
956{
957 unsigned long flags;
958
959 if (!usblp->present)
960 return -ENODEV;
961 if (signal_pending(current))
962 return -EINTR;
963 spin_lock_irqsave(&usblp->lock, flags);
964 if (usblp->rcomplete) {
965 spin_unlock_irqrestore(&usblp->lock, flags);
966 return 0;
967 }
968 spin_unlock_irqrestore(&usblp->lock, flags);
969 if (nonblock)
970 return -EAGAIN;
971 return 1;
972}
973
974/*
975 * Please check ->bidir and other such things outside for now.
976 */
977static int usblp_submit_read(struct usblp *usblp)
978{
979 struct urb *urb;
980 unsigned long flags;
981 int rc;
982
983 rc = -ENOMEM;
984 if ((urb = usb_alloc_urb(0, GFP_KERNEL)) == NULL)
985 goto raise_urb;
986
987 usb_fill_bulk_urb(urb, usblp->dev,
988 usb_rcvbulkpipe(usblp->dev,
989 usblp->protocol[usblp->current_protocol].epread->bEndpointAddress),
990 usblp->readbuf, USBLP_BUF_SIZE_IN,
991 usblp_bulk_read, usblp);
992 usb_anchor_urb(urb, &usblp->urbs);
993
994 spin_lock_irqsave(&usblp->lock, flags);
995 usblp->readcount = 0; /* XXX Why here? */
996 usblp->rcomplete = 0;
997 spin_unlock_irqrestore(&usblp->lock, flags);
998 if ((rc = usb_submit_urb(urb, GFP_KERNEL)) < 0) {
999 dev_dbg(&usblp->intf->dev, "error submitting urb (%d)\n", rc);
1000 spin_lock_irqsave(&usblp->lock, flags);
1001 usblp->rstatus = rc;
1002 usblp->rcomplete = 1;
1003 spin_unlock_irqrestore(&usblp->lock, flags);
1004 goto raise_submit;
1005 }
1006
1007 return 0;
1008
1009raise_submit:
1010 usb_unanchor_urb(urb);
1011 usb_free_urb(urb);
1012raise_urb:
1013 return rc;
1014}
1015
1016/*
1017 * Checks for printers that have quirks, such as requiring unidirectional
1018 * communication but reporting bidirectional; currently some HP printers
1019 * have this flaw (HP 810, 880, 895, etc.), or needing an init string
1020 * sent at each open (like some Epsons).
1021 * Returns 1 if found, 0 if not found.
1022 *
1023 * HP recommended that we use the bidirectional interface but
1024 * don't attempt any bulk IN transfers from the IN endpoint.
1025 * Here's some more detail on the problem:
1026 * The problem is not that it isn't bidirectional though. The problem
1027 * is that if you request a device ID, or status information, while
1028 * the buffers are full, the return data will end up in the print data
1029 * buffer. For example if you make sure you never request the device ID
1030 * while you are sending print data, and you don't try to query the
1031 * printer status every couple of milliseconds, you will probably be OK.
1032 */
1033static unsigned int usblp_quirks(__u16 vendor, __u16 product)
1034{
1035 int i;
1036
1037 for (i = 0; quirk_printers[i].vendorId; i++) {
1038 if (vendor == quirk_printers[i].vendorId &&
1039 product == quirk_printers[i].productId)
1040 return quirk_printers[i].quirks;
1041 }
1042 return 0;
1043}
1044
1045static const struct file_operations usblp_fops = {
1046 .owner = THIS_MODULE,
1047 .read = usblp_read,
1048 .write = usblp_write,
1049 .poll = usblp_poll,
1050 .unlocked_ioctl = usblp_ioctl,
1051 .compat_ioctl = usblp_ioctl,
1052 .open = usblp_open,
1053 .release = usblp_release,
1054 .llseek = noop_llseek,
1055};
1056
1057static char *usblp_devnode(struct device *dev, umode_t *mode)
1058{
1059 return kasprintf(GFP_KERNEL, "usb/%s", dev_name(dev));
1060}
1061
1062static struct usb_class_driver usblp_class = {
1063 .name = "lp%d",
1064 .devnode = usblp_devnode,
1065 .fops = &usblp_fops,
1066 .minor_base = USBLP_MINOR_BASE,
1067};
1068
1069static ssize_t usblp_show_ieee1284_id(struct device *dev, struct device_attribute *attr, char *buf)
1070{
1071 struct usb_interface *intf = to_usb_interface(dev);
1072 struct usblp *usblp = usb_get_intfdata(intf);
1073
1074 if (usblp->device_id_string[0] == 0 &&
1075 usblp->device_id_string[1] == 0)
1076 return 0;
1077
1078 return sprintf(buf, "%s", usblp->device_id_string+2);
1079}
1080
1081static DEVICE_ATTR(ieee1284_id, S_IRUGO, usblp_show_ieee1284_id, NULL);
1082
1083static int usblp_probe(struct usb_interface *intf,
1084 const struct usb_device_id *id)
1085{
1086 struct usb_device *dev = interface_to_usbdev(intf);
1087 struct usblp *usblp;
1088 int protocol;
1089 int retval;
1090
1091 /* Malloc and start initializing usblp structure so we can use it
1092 * directly. */
1093 usblp = kzalloc(sizeof(struct usblp), GFP_KERNEL);
1094 if (!usblp) {
1095 retval = -ENOMEM;
1096 goto abort_ret;
1097 }
1098 usblp->dev = dev;
1099 mutex_init(&usblp->wmut);
1100 mutex_init(&usblp->mut);
1101 spin_lock_init(&usblp->lock);
1102 init_waitqueue_head(&usblp->rwait);
1103 init_waitqueue_head(&usblp->wwait);
1104 init_usb_anchor(&usblp->urbs);
1105 usblp->ifnum = intf->cur_altsetting->desc.bInterfaceNumber;
1106 usblp->intf = intf;
1107
1108 /* Malloc device ID string buffer to the largest expected length,
1109 * since we can re-query it on an ioctl and a dynamic string
1110 * could change in length. */
1111 if (!(usblp->device_id_string = kmalloc(USBLP_DEVICE_ID_SIZE, GFP_KERNEL))) {
1112 retval = -ENOMEM;
1113 goto abort;
1114 }
1115
1116 /*
1117 * Allocate read buffer. We somewhat wastefully
1118 * malloc both regardless of bidirectionality, because the
1119 * alternate setting can be changed later via an ioctl.
1120 */
1121 if (!(usblp->readbuf = kmalloc(USBLP_BUF_SIZE_IN, GFP_KERNEL))) {
1122 retval = -ENOMEM;
1123 goto abort;
1124 }
1125
1126 /* Allocate buffer for printer status */
1127 usblp->statusbuf = kmalloc(STATUS_BUF_SIZE, GFP_KERNEL);
1128 if (!usblp->statusbuf) {
1129 retval = -ENOMEM;
1130 goto abort;
1131 }
1132
1133 /* Lookup quirks for this printer. */
1134 usblp->quirks = usblp_quirks(
1135 le16_to_cpu(dev->descriptor.idVendor),
1136 le16_to_cpu(dev->descriptor.idProduct));
1137
1138 /* Analyze and pick initial alternate settings and endpoints. */
1139 protocol = usblp_select_alts(usblp);
1140 if (protocol < 0) {
1141 dev_dbg(&intf->dev,
1142 "incompatible printer-class device 0x%4.4X/0x%4.4X\n",
1143 le16_to_cpu(dev->descriptor.idVendor),
1144 le16_to_cpu(dev->descriptor.idProduct));
1145 retval = -ENODEV;
1146 goto abort;
1147 }
1148
1149 /* Setup the selected alternate setting and endpoints. */
1150 if (usblp_set_protocol(usblp, protocol) < 0) {
1151 retval = -ENODEV; /* ->probe isn't ->ioctl */
1152 goto abort;
1153 }
1154
1155 /* Retrieve and store the device ID string. */
1156 usblp_cache_device_id_string(usblp);
1157 retval = device_create_file(&intf->dev, &dev_attr_ieee1284_id);
1158 if (retval)
1159 goto abort_intfdata;
1160
1161#ifdef DEBUG
1162 usblp_check_status(usblp, 0);
1163#endif
1164
1165 usb_set_intfdata(intf, usblp);
1166
1167 usblp->present = 1;
1168
1169 retval = usb_register_dev(intf, &usblp_class);
1170 if (retval) {
1171 dev_err(&intf->dev,
1172 "usblp: Not able to get a minor (base %u, slice default): %d\n",
1173 USBLP_MINOR_BASE, retval);
1174 goto abort_intfdata;
1175 }
1176 usblp->minor = intf->minor;
1177 dev_info(&intf->dev,
1178 "usblp%d: USB %sdirectional printer dev %d if %d alt %d proto %d vid 0x%4.4X pid 0x%4.4X\n",
1179 usblp->minor, usblp->bidir ? "Bi" : "Uni", dev->devnum,
1180 usblp->ifnum,
1181 usblp->protocol[usblp->current_protocol].alt_setting,
1182 usblp->current_protocol,
1183 le16_to_cpu(usblp->dev->descriptor.idVendor),
1184 le16_to_cpu(usblp->dev->descriptor.idProduct));
1185
1186 return 0;
1187
1188abort_intfdata:
1189 usb_set_intfdata(intf, NULL);
1190 device_remove_file(&intf->dev, &dev_attr_ieee1284_id);
1191abort:
1192 kfree(usblp->readbuf);
1193 kfree(usblp->statusbuf);
1194 kfree(usblp->device_id_string);
1195 kfree(usblp);
1196abort_ret:
1197 return retval;
1198}
1199
1200/*
1201 * We are a "new" style driver with usb_device_id table,
1202 * but our requirements are too intricate for simple match to handle.
1203 *
1204 * The "proto_bias" option may be used to specify the preferred protocol
1205 * for all USB printers (1=7/1/1, 2=7/1/2, 3=7/1/3). If the device
1206 * supports the preferred protocol, then we bind to it.
1207 *
1208 * The best interface for us is 7/1/2, because it is compatible
1209 * with a stream of characters. If we find it, we bind to it.
1210 *
1211 * Note that the people from hpoj.sourceforge.net need to be able to
1212 * bind to 7/1/3 (MLC/1284.4), so we provide them ioctls for this purpose.
1213 *
1214 * Failing 7/1/2, we look for 7/1/3, even though it's probably not
1215 * stream-compatible, because this matches the behaviour of the old code.
1216 *
1217 * If nothing else, we bind to 7/1/1 - the unidirectional interface.
1218 */
1219static int usblp_select_alts(struct usblp *usblp)
1220{
1221 struct usb_interface *if_alt;
1222 struct usb_host_interface *ifd;
1223 struct usb_endpoint_descriptor *epd, *epwrite, *epread;
1224 int p, i, e;
1225
1226 if_alt = usblp->intf;
1227
1228 for (p = 0; p < USBLP_MAX_PROTOCOLS; p++)
1229 usblp->protocol[p].alt_setting = -1;
1230
1231 /* Find out what we have. */
1232 for (i = 0; i < if_alt->num_altsetting; i++) {
1233 ifd = &if_alt->altsetting[i];
1234
1235 if (ifd->desc.bInterfaceClass != 7 || ifd->desc.bInterfaceSubClass != 1)
1236 if (!(usblp->quirks & USBLP_QUIRK_BAD_CLASS))
1237 continue;
1238
1239 if (ifd->desc.bInterfaceProtocol < USBLP_FIRST_PROTOCOL ||
1240 ifd->desc.bInterfaceProtocol > USBLP_LAST_PROTOCOL)
1241 continue;
1242
1243 /* Look for bulk OUT and IN endpoints. */
1244 epwrite = epread = NULL;
1245 for (e = 0; e < ifd->desc.bNumEndpoints; e++) {
1246 epd = &ifd->endpoint[e].desc;
1247
1248 if (usb_endpoint_is_bulk_out(epd))
1249 if (!epwrite)
1250 epwrite = epd;
1251
1252 if (usb_endpoint_is_bulk_in(epd))
1253 if (!epread)
1254 epread = epd;
1255 }
1256
1257 /* Ignore buggy hardware without the right endpoints. */
1258 if (!epwrite || (ifd->desc.bInterfaceProtocol > 1 && !epread))
1259 continue;
1260
1261 /* Turn off reads for 7/1/1 (unidirectional) interfaces
1262 * and buggy bidirectional printers. */
1263 if (ifd->desc.bInterfaceProtocol == 1) {
1264 epread = NULL;
1265 } else if (usblp->quirks & USBLP_QUIRK_BIDIR) {
1266 printk(KERN_INFO "usblp%d: Disabling reads from "
1267 "problematic bidirectional printer\n",
1268 usblp->minor);
1269 epread = NULL;
1270 }
1271
1272 usblp->protocol[ifd->desc.bInterfaceProtocol].alt_setting =
1273 ifd->desc.bAlternateSetting;
1274 usblp->protocol[ifd->desc.bInterfaceProtocol].epwrite = epwrite;
1275 usblp->protocol[ifd->desc.bInterfaceProtocol].epread = epread;
1276 }
1277
1278 /* If our requested protocol is supported, then use it. */
1279 if (proto_bias >= USBLP_FIRST_PROTOCOL &&
1280 proto_bias <= USBLP_LAST_PROTOCOL &&
1281 usblp->protocol[proto_bias].alt_setting != -1)
1282 return proto_bias;
1283
1284 /* Ordering is important here. */
1285 if (usblp->protocol[2].alt_setting != -1)
1286 return 2;
1287 if (usblp->protocol[1].alt_setting != -1)
1288 return 1;
1289 if (usblp->protocol[3].alt_setting != -1)
1290 return 3;
1291
1292 /* If nothing is available, then don't bind to this device. */
1293 return -1;
1294}
1295
1296static int usblp_set_protocol(struct usblp *usblp, int protocol)
1297{
1298 int r, alts;
1299
1300 if (protocol < USBLP_FIRST_PROTOCOL || protocol > USBLP_LAST_PROTOCOL)
1301 return -EINVAL;
1302
1303 alts = usblp->protocol[protocol].alt_setting;
1304 if (alts < 0)
1305 return -EINVAL;
1306 r = usb_set_interface(usblp->dev, usblp->ifnum, alts);
1307 if (r < 0) {
1308 printk(KERN_ERR "usblp: can't set desired altsetting %d on interface %d\n",
1309 alts, usblp->ifnum);
1310 return r;
1311 }
1312
1313 usblp->bidir = (usblp->protocol[protocol].epread != NULL);
1314 usblp->current_protocol = protocol;
1315 dev_dbg(&usblp->intf->dev, "usblp%d set protocol %d\n",
1316 usblp->minor, protocol);
1317 return 0;
1318}
1319
1320/* Retrieves and caches device ID string.
1321 * Returns length, including length bytes but not null terminator.
1322 * On error, returns a negative errno value. */
1323static int usblp_cache_device_id_string(struct usblp *usblp)
1324{
1325 int err, length;
1326
1327 err = usblp_get_id(usblp, 0, usblp->device_id_string, USBLP_DEVICE_ID_SIZE - 1);
1328 if (err < 0) {
1329 dev_dbg(&usblp->intf->dev,
1330 "usblp%d: error = %d reading IEEE-1284 Device ID string\n",
1331 usblp->minor, err);
1332 usblp->device_id_string[0] = usblp->device_id_string[1] = '\0';
1333 return -EIO;
1334 }
1335
1336 /* First two bytes are length in big-endian.
1337 * They count themselves, and we copy them into
1338 * the user's buffer. */
1339 length = be16_to_cpu(*((__be16 *)usblp->device_id_string));
1340 if (length < 2)
1341 length = 2;
1342 else if (length >= USBLP_DEVICE_ID_SIZE)
1343 length = USBLP_DEVICE_ID_SIZE - 1;
1344 usblp->device_id_string[length] = '\0';
1345
1346 dev_dbg(&usblp->intf->dev, "usblp%d Device ID string [len=%d]=\"%s\"\n",
1347 usblp->minor, length, &usblp->device_id_string[2]);
1348
1349 return length;
1350}
1351
1352static void usblp_disconnect(struct usb_interface *intf)
1353{
1354 struct usblp *usblp = usb_get_intfdata(intf);
1355
1356 usb_deregister_dev(intf, &usblp_class);
1357
1358 if (!usblp || !usblp->dev) {
1359 dev_err(&intf->dev, "bogus disconnect\n");
1360 BUG();
1361 }
1362
1363 device_remove_file(&intf->dev, &dev_attr_ieee1284_id);
1364
1365 mutex_lock(&usblp_mutex);
1366 mutex_lock(&usblp->mut);
1367 usblp->present = 0;
1368 wake_up(&usblp->wwait);
1369 wake_up(&usblp->rwait);
1370 usb_set_intfdata(intf, NULL);
1371
1372 usblp_unlink_urbs(usblp);
1373 mutex_unlock(&usblp->mut);
1374
1375 if (!usblp->used)
1376 usblp_cleanup(usblp);
1377 mutex_unlock(&usblp_mutex);
1378}
1379
1380static int usblp_suspend(struct usb_interface *intf, pm_message_t message)
1381{
1382 struct usblp *usblp = usb_get_intfdata(intf);
1383
1384 usblp_unlink_urbs(usblp);
1385#if 0 /* XXX Do we want this? What if someone is reading, should we fail? */
1386 /* not strictly necessary, but just in case */
1387 wake_up(&usblp->wwait);
1388 wake_up(&usblp->rwait);
1389#endif
1390
1391 return 0;
1392}
1393
1394static int usblp_resume(struct usb_interface *intf)
1395{
1396 struct usblp *usblp = usb_get_intfdata(intf);
1397 int r;
1398
1399 r = handle_bidir(usblp);
1400
1401 return r;
1402}
1403
1404static const struct usb_device_id usblp_ids[] = {
1405 { USB_DEVICE_INFO(7, 1, 1) },
1406 { USB_DEVICE_INFO(7, 1, 2) },
1407 { USB_DEVICE_INFO(7, 1, 3) },
1408 { USB_INTERFACE_INFO(7, 1, 1) },
1409 { USB_INTERFACE_INFO(7, 1, 2) },
1410 { USB_INTERFACE_INFO(7, 1, 3) },
1411 { USB_DEVICE(0x04b8, 0x0202) }, /* Seiko Epson Receipt Printer M129C */
1412 { } /* Terminating entry */
1413};
1414
1415MODULE_DEVICE_TABLE(usb, usblp_ids);
1416
1417static struct usb_driver usblp_driver = {
1418 .name = "usblp",
1419 .probe = usblp_probe,
1420 .disconnect = usblp_disconnect,
1421 .suspend = usblp_suspend,
1422 .resume = usblp_resume,
1423 .id_table = usblp_ids,
1424 .supports_autosuspend = 1,
1425};
1426
1427module_usb_driver(usblp_driver);
1428
1429MODULE_AUTHOR(DRIVER_AUTHOR);
1430MODULE_DESCRIPTION(DRIVER_DESC);
1431module_param(proto_bias, int, S_IRUGO | S_IWUSR);
1432MODULE_PARM_DESC(proto_bias, "Favourite protocol number");
1433MODULE_LICENSE("GPL");