Loading...
Note: File does not exist in v3.5.6.
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Marvell EBU Armada SoCs thermal sensor driver
4 *
5 * Copyright (C) 2013 Marvell
6 */
7#include <linux/device.h>
8#include <linux/err.h>
9#include <linux/io.h>
10#include <linux/kernel.h>
11#include <linux/of.h>
12#include <linux/module.h>
13#include <linux/delay.h>
14#include <linux/platform_device.h>
15#include <linux/of_device.h>
16#include <linux/thermal.h>
17#include <linux/iopoll.h>
18#include <linux/mfd/syscon.h>
19#include <linux/regmap.h>
20#include <linux/interrupt.h>
21
22/* Thermal Manager Control and Status Register */
23#define PMU_TDC0_SW_RST_MASK (0x1 << 1)
24#define PMU_TM_DISABLE_OFFS 0
25#define PMU_TM_DISABLE_MASK (0x1 << PMU_TM_DISABLE_OFFS)
26#define PMU_TDC0_REF_CAL_CNT_OFFS 11
27#define PMU_TDC0_REF_CAL_CNT_MASK (0x1ff << PMU_TDC0_REF_CAL_CNT_OFFS)
28#define PMU_TDC0_OTF_CAL_MASK (0x1 << 30)
29#define PMU_TDC0_START_CAL_MASK (0x1 << 25)
30
31#define A375_UNIT_CONTROL_SHIFT 27
32#define A375_UNIT_CONTROL_MASK 0x7
33#define A375_READOUT_INVERT BIT(15)
34#define A375_HW_RESETn BIT(8)
35
36/* Errata fields */
37#define CONTROL0_TSEN_TC_TRIM_MASK 0x7
38#define CONTROL0_TSEN_TC_TRIM_VAL 0x3
39
40#define CONTROL0_TSEN_START BIT(0)
41#define CONTROL0_TSEN_RESET BIT(1)
42#define CONTROL0_TSEN_ENABLE BIT(2)
43#define CONTROL0_TSEN_AVG_BYPASS BIT(6)
44#define CONTROL0_TSEN_CHAN_SHIFT 13
45#define CONTROL0_TSEN_CHAN_MASK 0xF
46#define CONTROL0_TSEN_OSR_SHIFT 24
47#define CONTROL0_TSEN_OSR_MAX 0x3
48#define CONTROL0_TSEN_MODE_SHIFT 30
49#define CONTROL0_TSEN_MODE_EXTERNAL 0x2
50#define CONTROL0_TSEN_MODE_MASK 0x3
51
52#define CONTROL1_TSEN_AVG_MASK 0x7
53#define CONTROL1_EXT_TSEN_SW_RESET BIT(7)
54#define CONTROL1_EXT_TSEN_HW_RESETn BIT(8)
55#define CONTROL1_TSEN_INT_EN BIT(25)
56#define CONTROL1_TSEN_SELECT_OFF 21
57#define CONTROL1_TSEN_SELECT_MASK 0x3
58
59#define STATUS_POLL_PERIOD_US 1000
60#define STATUS_POLL_TIMEOUT_US 100000
61#define OVERHEAT_INT_POLL_DELAY_MS 1000
62
63struct armada_thermal_data;
64
65/* Marvell EBU Thermal Sensor Dev Structure */
66struct armada_thermal_priv {
67 struct device *dev;
68 struct regmap *syscon;
69 char zone_name[THERMAL_NAME_LENGTH];
70 /* serialize temperature reads/updates */
71 struct mutex update_lock;
72 struct armada_thermal_data *data;
73 struct thermal_zone_device *overheat_sensor;
74 int interrupt_source;
75 int current_channel;
76 long current_threshold;
77 long current_hysteresis;
78};
79
80struct armada_thermal_data {
81 /* Initialize the thermal IC */
82 void (*init)(struct platform_device *pdev,
83 struct armada_thermal_priv *priv);
84
85 /* Formula coeficients: temp = (b - m * reg) / div */
86 s64 coef_b;
87 s64 coef_m;
88 u32 coef_div;
89 bool inverted;
90 bool signed_sample;
91
92 /* Register shift and mask to access the sensor temperature */
93 unsigned int temp_shift;
94 unsigned int temp_mask;
95 unsigned int thresh_shift;
96 unsigned int hyst_shift;
97 unsigned int hyst_mask;
98 u32 is_valid_bit;
99
100 /* Syscon access */
101 unsigned int syscon_control0_off;
102 unsigned int syscon_control1_off;
103 unsigned int syscon_status_off;
104 unsigned int dfx_irq_cause_off;
105 unsigned int dfx_irq_mask_off;
106 unsigned int dfx_overheat_irq;
107 unsigned int dfx_server_irq_mask_off;
108 unsigned int dfx_server_irq_en;
109
110 /* One sensor is in the thermal IC, the others are in the CPUs if any */
111 unsigned int cpu_nr;
112};
113
114struct armada_drvdata {
115 enum drvtype {
116 LEGACY,
117 SYSCON
118 } type;
119 union {
120 struct armada_thermal_priv *priv;
121 struct thermal_zone_device *tz;
122 } data;
123};
124
125/*
126 * struct armada_thermal_sensor - hold the information of one thermal sensor
127 * @thermal: pointer to the local private structure
128 * @tzd: pointer to the thermal zone device
129 * @id: identifier of the thermal sensor
130 */
131struct armada_thermal_sensor {
132 struct armada_thermal_priv *priv;
133 int id;
134};
135
136static void armadaxp_init(struct platform_device *pdev,
137 struct armada_thermal_priv *priv)
138{
139 struct armada_thermal_data *data = priv->data;
140 u32 reg;
141
142 regmap_read(priv->syscon, data->syscon_control1_off, ®);
143 reg |= PMU_TDC0_OTF_CAL_MASK;
144
145 /* Reference calibration value */
146 reg &= ~PMU_TDC0_REF_CAL_CNT_MASK;
147 reg |= (0xf1 << PMU_TDC0_REF_CAL_CNT_OFFS);
148
149 /* Reset the sensor */
150 reg |= PMU_TDC0_SW_RST_MASK;
151
152 regmap_write(priv->syscon, data->syscon_control1_off, reg);
153
154 reg &= ~PMU_TDC0_SW_RST_MASK;
155 regmap_write(priv->syscon, data->syscon_control1_off, reg);
156
157 /* Enable the sensor */
158 regmap_read(priv->syscon, data->syscon_status_off, ®);
159 reg &= ~PMU_TM_DISABLE_MASK;
160 regmap_write(priv->syscon, data->syscon_status_off, reg);
161}
162
163static void armada370_init(struct platform_device *pdev,
164 struct armada_thermal_priv *priv)
165{
166 struct armada_thermal_data *data = priv->data;
167 u32 reg;
168
169 regmap_read(priv->syscon, data->syscon_control1_off, ®);
170 reg |= PMU_TDC0_OTF_CAL_MASK;
171
172 /* Reference calibration value */
173 reg &= ~PMU_TDC0_REF_CAL_CNT_MASK;
174 reg |= (0xf1 << PMU_TDC0_REF_CAL_CNT_OFFS);
175
176 /* Reset the sensor */
177 reg &= ~PMU_TDC0_START_CAL_MASK;
178
179 regmap_write(priv->syscon, data->syscon_control1_off, reg);
180
181 msleep(10);
182}
183
184static void armada375_init(struct platform_device *pdev,
185 struct armada_thermal_priv *priv)
186{
187 struct armada_thermal_data *data = priv->data;
188 u32 reg;
189
190 regmap_read(priv->syscon, data->syscon_control1_off, ®);
191 reg &= ~(A375_UNIT_CONTROL_MASK << A375_UNIT_CONTROL_SHIFT);
192 reg &= ~A375_READOUT_INVERT;
193 reg &= ~A375_HW_RESETn;
194 regmap_write(priv->syscon, data->syscon_control1_off, reg);
195
196 msleep(20);
197
198 reg |= A375_HW_RESETn;
199 regmap_write(priv->syscon, data->syscon_control1_off, reg);
200
201 msleep(50);
202}
203
204static int armada_wait_sensor_validity(struct armada_thermal_priv *priv)
205{
206 u32 reg;
207
208 return regmap_read_poll_timeout(priv->syscon,
209 priv->data->syscon_status_off, reg,
210 reg & priv->data->is_valid_bit,
211 STATUS_POLL_PERIOD_US,
212 STATUS_POLL_TIMEOUT_US);
213}
214
215static void armada380_init(struct platform_device *pdev,
216 struct armada_thermal_priv *priv)
217{
218 struct armada_thermal_data *data = priv->data;
219 u32 reg;
220
221 /* Disable the HW/SW reset */
222 regmap_read(priv->syscon, data->syscon_control1_off, ®);
223 reg |= CONTROL1_EXT_TSEN_HW_RESETn;
224 reg &= ~CONTROL1_EXT_TSEN_SW_RESET;
225 regmap_write(priv->syscon, data->syscon_control1_off, reg);
226
227 /* Set Tsen Tc Trim to correct default value (errata #132698) */
228 regmap_read(priv->syscon, data->syscon_control0_off, ®);
229 reg &= ~CONTROL0_TSEN_TC_TRIM_MASK;
230 reg |= CONTROL0_TSEN_TC_TRIM_VAL;
231 regmap_write(priv->syscon, data->syscon_control0_off, reg);
232}
233
234static void armada_ap80x_init(struct platform_device *pdev,
235 struct armada_thermal_priv *priv)
236{
237 struct armada_thermal_data *data = priv->data;
238 u32 reg;
239
240 regmap_read(priv->syscon, data->syscon_control0_off, ®);
241 reg &= ~CONTROL0_TSEN_RESET;
242 reg |= CONTROL0_TSEN_START | CONTROL0_TSEN_ENABLE;
243
244 /* Sample every ~2ms */
245 reg |= CONTROL0_TSEN_OSR_MAX << CONTROL0_TSEN_OSR_SHIFT;
246
247 /* Enable average (2 samples by default) */
248 reg &= ~CONTROL0_TSEN_AVG_BYPASS;
249
250 regmap_write(priv->syscon, data->syscon_control0_off, reg);
251}
252
253static void armada_cp110_init(struct platform_device *pdev,
254 struct armada_thermal_priv *priv)
255{
256 struct armada_thermal_data *data = priv->data;
257 u32 reg;
258
259 armada380_init(pdev, priv);
260
261 /* Sample every ~2ms */
262 regmap_read(priv->syscon, data->syscon_control0_off, ®);
263 reg |= CONTROL0_TSEN_OSR_MAX << CONTROL0_TSEN_OSR_SHIFT;
264 regmap_write(priv->syscon, data->syscon_control0_off, reg);
265
266 /* Average the output value over 2^1 = 2 samples */
267 regmap_read(priv->syscon, data->syscon_control1_off, ®);
268 reg &= ~CONTROL1_TSEN_AVG_MASK;
269 reg |= 1;
270 regmap_write(priv->syscon, data->syscon_control1_off, reg);
271}
272
273static bool armada_is_valid(struct armada_thermal_priv *priv)
274{
275 u32 reg;
276
277 if (!priv->data->is_valid_bit)
278 return true;
279
280 regmap_read(priv->syscon, priv->data->syscon_status_off, ®);
281
282 return reg & priv->data->is_valid_bit;
283}
284
285static void armada_enable_overheat_interrupt(struct armada_thermal_priv *priv)
286{
287 struct armada_thermal_data *data = priv->data;
288 u32 reg;
289
290 /* Clear DFX temperature IRQ cause */
291 regmap_read(priv->syscon, data->dfx_irq_cause_off, ®);
292
293 /* Enable DFX Temperature IRQ */
294 regmap_read(priv->syscon, data->dfx_irq_mask_off, ®);
295 reg |= data->dfx_overheat_irq;
296 regmap_write(priv->syscon, data->dfx_irq_mask_off, reg);
297
298 /* Enable DFX server IRQ */
299 regmap_read(priv->syscon, data->dfx_server_irq_mask_off, ®);
300 reg |= data->dfx_server_irq_en;
301 regmap_write(priv->syscon, data->dfx_server_irq_mask_off, reg);
302
303 /* Enable overheat interrupt */
304 regmap_read(priv->syscon, data->syscon_control1_off, ®);
305 reg |= CONTROL1_TSEN_INT_EN;
306 regmap_write(priv->syscon, data->syscon_control1_off, reg);
307}
308
309static void __maybe_unused
310armada_disable_overheat_interrupt(struct armada_thermal_priv *priv)
311{
312 struct armada_thermal_data *data = priv->data;
313 u32 reg;
314
315 regmap_read(priv->syscon, data->syscon_control1_off, ®);
316 reg &= ~CONTROL1_TSEN_INT_EN;
317 regmap_write(priv->syscon, data->syscon_control1_off, reg);
318}
319
320/* There is currently no board with more than one sensor per channel */
321static int armada_select_channel(struct armada_thermal_priv *priv, int channel)
322{
323 struct armada_thermal_data *data = priv->data;
324 u32 ctrl0;
325
326 if (channel < 0 || channel > priv->data->cpu_nr)
327 return -EINVAL;
328
329 if (priv->current_channel == channel)
330 return 0;
331
332 /* Stop the measurements */
333 regmap_read(priv->syscon, data->syscon_control0_off, &ctrl0);
334 ctrl0 &= ~CONTROL0_TSEN_START;
335 regmap_write(priv->syscon, data->syscon_control0_off, ctrl0);
336
337 /* Reset the mode, internal sensor will be automatically selected */
338 ctrl0 &= ~(CONTROL0_TSEN_MODE_MASK << CONTROL0_TSEN_MODE_SHIFT);
339
340 /* Other channels are external and should be selected accordingly */
341 if (channel) {
342 /* Change the mode to external */
343 ctrl0 |= CONTROL0_TSEN_MODE_EXTERNAL <<
344 CONTROL0_TSEN_MODE_SHIFT;
345 /* Select the sensor */
346 ctrl0 &= ~(CONTROL0_TSEN_CHAN_MASK << CONTROL0_TSEN_CHAN_SHIFT);
347 ctrl0 |= (channel - 1) << CONTROL0_TSEN_CHAN_SHIFT;
348 }
349
350 /* Actually set the mode/channel */
351 regmap_write(priv->syscon, data->syscon_control0_off, ctrl0);
352 priv->current_channel = channel;
353
354 /* Re-start the measurements */
355 ctrl0 |= CONTROL0_TSEN_START;
356 regmap_write(priv->syscon, data->syscon_control0_off, ctrl0);
357
358 /*
359 * The IP has a latency of ~15ms, so after updating the selected source,
360 * we must absolutely wait for the sensor validity bit to ensure we read
361 * actual data.
362 */
363 if (armada_wait_sensor_validity(priv))
364 return -EIO;
365
366 return 0;
367}
368
369static int armada_read_sensor(struct armada_thermal_priv *priv, int *temp)
370{
371 u32 reg, div;
372 s64 sample, b, m;
373
374 regmap_read(priv->syscon, priv->data->syscon_status_off, ®);
375 reg = (reg >> priv->data->temp_shift) & priv->data->temp_mask;
376 if (priv->data->signed_sample)
377 /* The most significant bit is the sign bit */
378 sample = sign_extend32(reg, fls(priv->data->temp_mask) - 1);
379 else
380 sample = reg;
381
382 /* Get formula coeficients */
383 b = priv->data->coef_b;
384 m = priv->data->coef_m;
385 div = priv->data->coef_div;
386
387 if (priv->data->inverted)
388 *temp = div_s64((m * sample) - b, div);
389 else
390 *temp = div_s64(b - (m * sample), div);
391
392 return 0;
393}
394
395static int armada_get_temp_legacy(struct thermal_zone_device *thermal,
396 int *temp)
397{
398 struct armada_thermal_priv *priv = thermal_zone_device_priv(thermal);
399 int ret;
400
401 /* Valid check */
402 if (!armada_is_valid(priv))
403 return -EIO;
404
405 /* Do the actual reading */
406 ret = armada_read_sensor(priv, temp);
407
408 return ret;
409}
410
411static struct thermal_zone_device_ops legacy_ops = {
412 .get_temp = armada_get_temp_legacy,
413};
414
415static int armada_get_temp(struct thermal_zone_device *tz, int *temp)
416{
417 struct armada_thermal_sensor *sensor = thermal_zone_device_priv(tz);
418 struct armada_thermal_priv *priv = sensor->priv;
419 int ret;
420
421 mutex_lock(&priv->update_lock);
422
423 /* Select the desired channel */
424 ret = armada_select_channel(priv, sensor->id);
425 if (ret)
426 goto unlock_mutex;
427
428 /* Do the actual reading */
429 ret = armada_read_sensor(priv, temp);
430 if (ret)
431 goto unlock_mutex;
432
433 /*
434 * Select back the interrupt source channel from which a potential
435 * critical trip point has been set.
436 */
437 ret = armada_select_channel(priv, priv->interrupt_source);
438
439unlock_mutex:
440 mutex_unlock(&priv->update_lock);
441
442 return ret;
443}
444
445static const struct thermal_zone_device_ops of_ops = {
446 .get_temp = armada_get_temp,
447};
448
449static unsigned int armada_mc_to_reg_temp(struct armada_thermal_data *data,
450 unsigned int temp_mc)
451{
452 s64 b = data->coef_b;
453 s64 m = data->coef_m;
454 s64 div = data->coef_div;
455 unsigned int sample;
456
457 if (data->inverted)
458 sample = div_s64(((temp_mc * div) + b), m);
459 else
460 sample = div_s64((b - (temp_mc * div)), m);
461
462 return sample & data->temp_mask;
463}
464
465/*
466 * The documentation states:
467 * high/low watermark = threshold +/- 0.4761 * 2^(hysteresis + 2)
468 * which is the mathematical derivation for:
469 * 0x0 <=> 1.9°C, 0x1 <=> 3.8°C, 0x2 <=> 7.6°C, 0x3 <=> 15.2°C
470 */
471static unsigned int hyst_levels_mc[] = {1900, 3800, 7600, 15200};
472
473static unsigned int armada_mc_to_reg_hyst(struct armada_thermal_data *data,
474 unsigned int hyst_mc)
475{
476 int i;
477
478 /*
479 * We will always take the smallest possible hysteresis to avoid risking
480 * the hardware integrity by enlarging the threshold by +8°C in the
481 * worst case.
482 */
483 for (i = ARRAY_SIZE(hyst_levels_mc) - 1; i > 0; i--)
484 if (hyst_mc >= hyst_levels_mc[i])
485 break;
486
487 return i & data->hyst_mask;
488}
489
490static void armada_set_overheat_thresholds(struct armada_thermal_priv *priv,
491 int thresh_mc, int hyst_mc)
492{
493 struct armada_thermal_data *data = priv->data;
494 unsigned int threshold = armada_mc_to_reg_temp(data, thresh_mc);
495 unsigned int hysteresis = armada_mc_to_reg_hyst(data, hyst_mc);
496 u32 ctrl1;
497
498 regmap_read(priv->syscon, data->syscon_control1_off, &ctrl1);
499
500 /* Set Threshold */
501 if (thresh_mc >= 0) {
502 ctrl1 &= ~(data->temp_mask << data->thresh_shift);
503 ctrl1 |= threshold << data->thresh_shift;
504 priv->current_threshold = thresh_mc;
505 }
506
507 /* Set Hysteresis */
508 if (hyst_mc >= 0) {
509 ctrl1 &= ~(data->hyst_mask << data->hyst_shift);
510 ctrl1 |= hysteresis << data->hyst_shift;
511 priv->current_hysteresis = hyst_mc;
512 }
513
514 regmap_write(priv->syscon, data->syscon_control1_off, ctrl1);
515}
516
517static irqreturn_t armada_overheat_isr(int irq, void *blob)
518{
519 /*
520 * Disable the IRQ and continue in thread context (thermal core
521 * notification and temperature monitoring).
522 */
523 disable_irq_nosync(irq);
524
525 return IRQ_WAKE_THREAD;
526}
527
528static irqreturn_t armada_overheat_isr_thread(int irq, void *blob)
529{
530 struct armada_thermal_priv *priv = blob;
531 int low_threshold = priv->current_threshold - priv->current_hysteresis;
532 int temperature;
533 u32 dummy;
534 int ret;
535
536 /* Notify the core in thread context */
537 thermal_zone_device_update(priv->overheat_sensor,
538 THERMAL_EVENT_UNSPECIFIED);
539
540 /*
541 * The overheat interrupt must be cleared by reading the DFX interrupt
542 * cause _after_ the temperature has fallen down to the low threshold.
543 * Otherwise future interrupts might not be served.
544 */
545 do {
546 msleep(OVERHEAT_INT_POLL_DELAY_MS);
547 mutex_lock(&priv->update_lock);
548 ret = armada_read_sensor(priv, &temperature);
549 mutex_unlock(&priv->update_lock);
550 if (ret)
551 goto enable_irq;
552 } while (temperature >= low_threshold);
553
554 regmap_read(priv->syscon, priv->data->dfx_irq_cause_off, &dummy);
555
556 /* Notify the thermal core that the temperature is acceptable again */
557 thermal_zone_device_update(priv->overheat_sensor,
558 THERMAL_EVENT_UNSPECIFIED);
559
560enable_irq:
561 enable_irq(irq);
562
563 return IRQ_HANDLED;
564}
565
566static const struct armada_thermal_data armadaxp_data = {
567 .init = armadaxp_init,
568 .temp_shift = 10,
569 .temp_mask = 0x1ff,
570 .coef_b = 3153000000ULL,
571 .coef_m = 10000000ULL,
572 .coef_div = 13825,
573 .syscon_status_off = 0xb0,
574 .syscon_control1_off = 0x2d0,
575};
576
577static const struct armada_thermal_data armada370_data = {
578 .init = armada370_init,
579 .is_valid_bit = BIT(9),
580 .temp_shift = 10,
581 .temp_mask = 0x1ff,
582 .coef_b = 3153000000ULL,
583 .coef_m = 10000000ULL,
584 .coef_div = 13825,
585 .syscon_status_off = 0x0,
586 .syscon_control1_off = 0x4,
587};
588
589static const struct armada_thermal_data armada375_data = {
590 .init = armada375_init,
591 .is_valid_bit = BIT(10),
592 .temp_shift = 0,
593 .temp_mask = 0x1ff,
594 .coef_b = 3171900000ULL,
595 .coef_m = 10000000ULL,
596 .coef_div = 13616,
597 .syscon_status_off = 0x78,
598 .syscon_control0_off = 0x7c,
599 .syscon_control1_off = 0x80,
600};
601
602static const struct armada_thermal_data armada380_data = {
603 .init = armada380_init,
604 .is_valid_bit = BIT(10),
605 .temp_shift = 0,
606 .temp_mask = 0x3ff,
607 .coef_b = 1172499100ULL,
608 .coef_m = 2000096ULL,
609 .coef_div = 4201,
610 .inverted = true,
611 .syscon_control0_off = 0x70,
612 .syscon_control1_off = 0x74,
613 .syscon_status_off = 0x78,
614};
615
616static const struct armada_thermal_data armada_ap806_data = {
617 .init = armada_ap80x_init,
618 .is_valid_bit = BIT(16),
619 .temp_shift = 0,
620 .temp_mask = 0x3ff,
621 .thresh_shift = 3,
622 .hyst_shift = 19,
623 .hyst_mask = 0x3,
624 .coef_b = -150000LL,
625 .coef_m = 423ULL,
626 .coef_div = 1,
627 .inverted = true,
628 .signed_sample = true,
629 .syscon_control0_off = 0x84,
630 .syscon_control1_off = 0x88,
631 .syscon_status_off = 0x8C,
632 .dfx_irq_cause_off = 0x108,
633 .dfx_irq_mask_off = 0x10C,
634 .dfx_overheat_irq = BIT(22),
635 .dfx_server_irq_mask_off = 0x104,
636 .dfx_server_irq_en = BIT(1),
637 .cpu_nr = 4,
638};
639
640static const struct armada_thermal_data armada_ap807_data = {
641 .init = armada_ap80x_init,
642 .is_valid_bit = BIT(16),
643 .temp_shift = 0,
644 .temp_mask = 0x3ff,
645 .thresh_shift = 3,
646 .hyst_shift = 19,
647 .hyst_mask = 0x3,
648 .coef_b = -128900LL,
649 .coef_m = 394ULL,
650 .coef_div = 1,
651 .inverted = true,
652 .signed_sample = true,
653 .syscon_control0_off = 0x84,
654 .syscon_control1_off = 0x88,
655 .syscon_status_off = 0x8C,
656 .dfx_irq_cause_off = 0x108,
657 .dfx_irq_mask_off = 0x10C,
658 .dfx_overheat_irq = BIT(22),
659 .dfx_server_irq_mask_off = 0x104,
660 .dfx_server_irq_en = BIT(1),
661 .cpu_nr = 4,
662};
663
664static const struct armada_thermal_data armada_cp110_data = {
665 .init = armada_cp110_init,
666 .is_valid_bit = BIT(10),
667 .temp_shift = 0,
668 .temp_mask = 0x3ff,
669 .thresh_shift = 16,
670 .hyst_shift = 26,
671 .hyst_mask = 0x3,
672 .coef_b = 1172499100ULL,
673 .coef_m = 2000096ULL,
674 .coef_div = 4201,
675 .inverted = true,
676 .syscon_control0_off = 0x70,
677 .syscon_control1_off = 0x74,
678 .syscon_status_off = 0x78,
679 .dfx_irq_cause_off = 0x108,
680 .dfx_irq_mask_off = 0x10C,
681 .dfx_overheat_irq = BIT(20),
682 .dfx_server_irq_mask_off = 0x104,
683 .dfx_server_irq_en = BIT(1),
684};
685
686static const struct of_device_id armada_thermal_id_table[] = {
687 {
688 .compatible = "marvell,armadaxp-thermal",
689 .data = &armadaxp_data,
690 },
691 {
692 .compatible = "marvell,armada370-thermal",
693 .data = &armada370_data,
694 },
695 {
696 .compatible = "marvell,armada375-thermal",
697 .data = &armada375_data,
698 },
699 {
700 .compatible = "marvell,armada380-thermal",
701 .data = &armada380_data,
702 },
703 {
704 .compatible = "marvell,armada-ap806-thermal",
705 .data = &armada_ap806_data,
706 },
707 {
708 .compatible = "marvell,armada-ap807-thermal",
709 .data = &armada_ap807_data,
710 },
711 {
712 .compatible = "marvell,armada-cp110-thermal",
713 .data = &armada_cp110_data,
714 },
715 {
716 /* sentinel */
717 },
718};
719MODULE_DEVICE_TABLE(of, armada_thermal_id_table);
720
721static const struct regmap_config armada_thermal_regmap_config = {
722 .reg_bits = 32,
723 .reg_stride = 4,
724 .val_bits = 32,
725 .fast_io = true,
726};
727
728static int armada_thermal_probe_legacy(struct platform_device *pdev,
729 struct armada_thermal_priv *priv)
730{
731 struct armada_thermal_data *data = priv->data;
732 void __iomem *base;
733
734 /* First memory region points towards the status register */
735 base = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
736 if (IS_ERR(base))
737 return PTR_ERR(base);
738
739 /*
740 * Fix up from the old individual DT register specification to
741 * cover all the registers. We do this by adjusting the ioremap()
742 * result, which should be fine as ioremap() deals with pages.
743 * However, validate that we do not cross a page boundary while
744 * making this adjustment.
745 */
746 if (((unsigned long)base & ~PAGE_MASK) < data->syscon_status_off)
747 return -EINVAL;
748 base -= data->syscon_status_off;
749
750 priv->syscon = devm_regmap_init_mmio(&pdev->dev, base,
751 &armada_thermal_regmap_config);
752 return PTR_ERR_OR_ZERO(priv->syscon);
753}
754
755static int armada_thermal_probe_syscon(struct platform_device *pdev,
756 struct armada_thermal_priv *priv)
757{
758 priv->syscon = syscon_node_to_regmap(pdev->dev.parent->of_node);
759 return PTR_ERR_OR_ZERO(priv->syscon);
760}
761
762static void armada_set_sane_name(struct platform_device *pdev,
763 struct armada_thermal_priv *priv)
764{
765 const char *name = dev_name(&pdev->dev);
766 char *insane_char;
767
768 if (strlen(name) > THERMAL_NAME_LENGTH) {
769 /*
770 * When inside a system controller, the device name has the
771 * form: f06f8000.system-controller:ap-thermal so stripping
772 * after the ':' should give us a shorter but meaningful name.
773 */
774 name = strrchr(name, ':');
775 if (!name)
776 name = "armada_thermal";
777 else
778 name++;
779 }
780
781 /* Save the name locally */
782 strscpy(priv->zone_name, name, THERMAL_NAME_LENGTH);
783
784 /* Then check there are no '-' or hwmon core will complain */
785 do {
786 insane_char = strpbrk(priv->zone_name, "-");
787 if (insane_char)
788 *insane_char = '_';
789 } while (insane_char);
790}
791
792/*
793 * The IP can manage to trigger interrupts on overheat situation from all the
794 * sensors. However, the interrupt source changes along with the last selected
795 * source (ie. the last read sensor), which is an inconsistent behavior. Avoid
796 * possible glitches by always selecting back only one channel (arbitrarily: the
797 * first in the DT which has a critical trip point). We also disable sensor
798 * switch during overheat situations.
799 */
800static int armada_configure_overheat_int(struct armada_thermal_priv *priv,
801 struct thermal_zone_device *tz,
802 int sensor_id)
803{
804 /* Retrieve the critical trip point to enable the overheat interrupt */
805 int temperature;
806 int ret;
807
808 ret = thermal_zone_get_crit_temp(tz, &temperature);
809 if (ret)
810 return ret;
811
812 ret = armada_select_channel(priv, sensor_id);
813 if (ret)
814 return ret;
815
816 /*
817 * A critical temperature does not have a hysteresis
818 */
819 armada_set_overheat_thresholds(priv, temperature, 0);
820 priv->overheat_sensor = tz;
821 priv->interrupt_source = sensor_id;
822 armada_enable_overheat_interrupt(priv);
823
824 return 0;
825}
826
827static int armada_thermal_probe(struct platform_device *pdev)
828{
829 struct thermal_zone_device *tz;
830 struct armada_thermal_sensor *sensor;
831 struct armada_drvdata *drvdata;
832 const struct of_device_id *match;
833 struct armada_thermal_priv *priv;
834 int sensor_id, irq;
835 int ret;
836
837 match = of_match_device(armada_thermal_id_table, &pdev->dev);
838 if (!match)
839 return -ENODEV;
840
841 priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
842 if (!priv)
843 return -ENOMEM;
844
845 drvdata = devm_kzalloc(&pdev->dev, sizeof(*drvdata), GFP_KERNEL);
846 if (!drvdata)
847 return -ENOMEM;
848
849 priv->dev = &pdev->dev;
850 priv->data = (struct armada_thermal_data *)match->data;
851
852 mutex_init(&priv->update_lock);
853
854 /*
855 * Legacy DT bindings only described "control1" register (also referred
856 * as "control MSB" on old documentation). Then, bindings moved to cover
857 * "control0/control LSB" and "control1/control MSB" registers within
858 * the same resource, which was then of size 8 instead of 4.
859 *
860 * The logic of defining sporadic registers is broken. For instance, it
861 * blocked the addition of the overheat interrupt feature that needed
862 * another resource somewhere else in the same memory area. One solution
863 * is to define an overall system controller and put the thermal node
864 * into it, which requires the use of regmaps across all the driver.
865 */
866 if (IS_ERR(syscon_node_to_regmap(pdev->dev.parent->of_node))) {
867 /* Ensure device name is correct for the thermal core */
868 armada_set_sane_name(pdev, priv);
869
870 ret = armada_thermal_probe_legacy(pdev, priv);
871 if (ret)
872 return ret;
873
874 priv->data->init(pdev, priv);
875
876 /* Wait the sensors to be valid */
877 armada_wait_sensor_validity(priv);
878
879 tz = thermal_tripless_zone_device_register(priv->zone_name,
880 priv, &legacy_ops,
881 NULL);
882 if (IS_ERR(tz)) {
883 dev_err(&pdev->dev,
884 "Failed to register thermal zone device\n");
885 return PTR_ERR(tz);
886 }
887
888 ret = thermal_zone_device_enable(tz);
889 if (ret) {
890 thermal_zone_device_unregister(tz);
891 return ret;
892 }
893
894 drvdata->type = LEGACY;
895 drvdata->data.tz = tz;
896 platform_set_drvdata(pdev, drvdata);
897
898 return 0;
899 }
900
901 ret = armada_thermal_probe_syscon(pdev, priv);
902 if (ret)
903 return ret;
904
905 priv->current_channel = -1;
906 priv->data->init(pdev, priv);
907 drvdata->type = SYSCON;
908 drvdata->data.priv = priv;
909 platform_set_drvdata(pdev, drvdata);
910
911 irq = platform_get_irq(pdev, 0);
912 if (irq == -EPROBE_DEFER)
913 return irq;
914
915 /* The overheat interrupt feature is not mandatory */
916 if (irq > 0) {
917 ret = devm_request_threaded_irq(&pdev->dev, irq,
918 armada_overheat_isr,
919 armada_overheat_isr_thread,
920 0, NULL, priv);
921 if (ret) {
922 dev_err(&pdev->dev, "Cannot request threaded IRQ %d\n",
923 irq);
924 return ret;
925 }
926 }
927
928 /*
929 * There is one channel for the IC and one per CPU (if any), each
930 * channel has one sensor.
931 */
932 for (sensor_id = 0; sensor_id <= priv->data->cpu_nr; sensor_id++) {
933 sensor = devm_kzalloc(&pdev->dev,
934 sizeof(struct armada_thermal_sensor),
935 GFP_KERNEL);
936 if (!sensor)
937 return -ENOMEM;
938
939 /* Register the sensor */
940 sensor->priv = priv;
941 sensor->id = sensor_id;
942 tz = devm_thermal_of_zone_register(&pdev->dev,
943 sensor->id, sensor,
944 &of_ops);
945 if (IS_ERR(tz)) {
946 dev_info(&pdev->dev, "Thermal sensor %d unavailable\n",
947 sensor_id);
948 devm_kfree(&pdev->dev, sensor);
949 continue;
950 }
951
952 /*
953 * The first channel that has a critical trip point registered
954 * in the DT will serve as interrupt source. Others possible
955 * critical trip points will simply be ignored by the driver.
956 */
957 if (irq > 0 && !priv->overheat_sensor)
958 armada_configure_overheat_int(priv, tz, sensor->id);
959 }
960
961 /* Just complain if no overheat interrupt was set up */
962 if (!priv->overheat_sensor)
963 dev_warn(&pdev->dev, "Overheat interrupt not available\n");
964
965 return 0;
966}
967
968static void armada_thermal_exit(struct platform_device *pdev)
969{
970 struct armada_drvdata *drvdata = platform_get_drvdata(pdev);
971
972 if (drvdata->type == LEGACY)
973 thermal_zone_device_unregister(drvdata->data.tz);
974}
975
976static struct platform_driver armada_thermal_driver = {
977 .probe = armada_thermal_probe,
978 .remove_new = armada_thermal_exit,
979 .driver = {
980 .name = "armada_thermal",
981 .of_match_table = armada_thermal_id_table,
982 },
983};
984
985module_platform_driver(armada_thermal_driver);
986
987MODULE_AUTHOR("Ezequiel Garcia <ezequiel.garcia@free-electrons.com>");
988MODULE_DESCRIPTION("Marvell EBU Armada SoCs thermal driver");
989MODULE_LICENSE("GPL v2");