Loading...
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * MDIO bus driver for the Xilinx TEMAC device
4 *
5 * Copyright (c) 2009 Secret Lab Technologies, Ltd.
6 */
7
8#include <linux/io.h>
9#include <linux/netdevice.h>
10#include <linux/mutex.h>
11#include <linux/phy.h>
12#include <linux/of.h>
13#include <linux/of_address.h>
14#include <linux/platform_device.h>
15#include <linux/slab.h>
16#include <linux/of_mdio.h>
17#include <linux/platform_data/xilinx-ll-temac.h>
18
19#include "ll_temac.h"
20
21/* ---------------------------------------------------------------------
22 * MDIO Bus functions
23 */
24static int temac_mdio_read(struct mii_bus *bus, int phy_id, int reg)
25{
26 struct temac_local *lp = bus->priv;
27 u32 rc;
28 unsigned long flags;
29
30 /* Write the PHY address to the MIIM Access Initiator register.
31 * When the transfer completes, the PHY register value will appear
32 * in the LSW0 register
33 */
34 spin_lock_irqsave(lp->indirect_lock, flags);
35 temac_iow(lp, XTE_LSW0_OFFSET, (phy_id << 5) | reg);
36 rc = temac_indirect_in32_locked(lp, XTE_MIIMAI_OFFSET);
37 spin_unlock_irqrestore(lp->indirect_lock, flags);
38
39 dev_dbg(lp->dev, "temac_mdio_read(phy_id=%i, reg=%x) == %x\n",
40 phy_id, reg, rc);
41
42 return rc;
43}
44
45static int temac_mdio_write(struct mii_bus *bus, int phy_id, int reg, u16 val)
46{
47 struct temac_local *lp = bus->priv;
48 unsigned long flags;
49
50 dev_dbg(lp->dev, "temac_mdio_write(phy_id=%i, reg=%x, val=%x)\n",
51 phy_id, reg, val);
52
53 /* First write the desired value into the write data register
54 * and then write the address into the access initiator register
55 */
56 spin_lock_irqsave(lp->indirect_lock, flags);
57 temac_indirect_out32_locked(lp, XTE_MGTDR_OFFSET, val);
58 temac_indirect_out32_locked(lp, XTE_MIIMAI_OFFSET, (phy_id << 5) | reg);
59 spin_unlock_irqrestore(lp->indirect_lock, flags);
60
61 return 0;
62}
63
64int temac_mdio_setup(struct temac_local *lp, struct platform_device *pdev)
65{
66 struct ll_temac_platform_data *pdata = dev_get_platdata(&pdev->dev);
67 struct device_node *np = dev_of_node(&pdev->dev);
68 struct mii_bus *bus;
69 u32 bus_hz;
70 int clk_div;
71 int rc;
72 struct resource res;
73
74 /* Get MDIO bus frequency (if specified) */
75 bus_hz = 0;
76 if (np)
77 of_property_read_u32(np, "clock-frequency", &bus_hz);
78 else if (pdata)
79 bus_hz = pdata->mdio_clk_freq;
80
81 /* Calculate a reasonable divisor for the clock rate */
82 clk_div = 0x3f; /* worst-case default setting */
83 if (bus_hz != 0) {
84 clk_div = bus_hz / (2500 * 1000 * 2) - 1;
85 if (clk_div < 1)
86 clk_div = 1;
87 if (clk_div > 0x3f)
88 clk_div = 0x3f;
89 }
90
91 /* Enable the MDIO bus by asserting the enable bit and writing
92 * in the clock config
93 */
94 temac_indirect_out32(lp, XTE_MC_OFFSET, 1 << 6 | clk_div);
95
96 bus = devm_mdiobus_alloc(&pdev->dev);
97 if (!bus)
98 return -ENOMEM;
99
100 if (np) {
101 of_address_to_resource(np, 0, &res);
102 snprintf(bus->id, MII_BUS_ID_SIZE, "%.8llx",
103 (unsigned long long)res.start);
104 } else if (pdata) {
105 snprintf(bus->id, MII_BUS_ID_SIZE, "%.8llx",
106 pdata->mdio_bus_id);
107 }
108
109 bus->priv = lp;
110 bus->name = "Xilinx TEMAC MDIO";
111 bus->read = temac_mdio_read;
112 bus->write = temac_mdio_write;
113 bus->parent = lp->dev;
114
115 lp->mii_bus = bus;
116
117 rc = of_mdiobus_register(bus, np);
118 if (rc)
119 return rc;
120
121 dev_dbg(lp->dev, "MDIO bus registered; MC:%x\n",
122 temac_indirect_in32(lp, XTE_MC_OFFSET));
123 return 0;
124}
125
126void temac_mdio_teardown(struct temac_local *lp)
127{
128 mdiobus_unregister(lp->mii_bus);
129}
1/*
2 * MDIO bus driver for the Xilinx TEMAC device
3 *
4 * Copyright (c) 2009 Secret Lab Technologies, Ltd.
5 */
6
7#include <linux/io.h>
8#include <linux/netdevice.h>
9#include <linux/mutex.h>
10#include <linux/phy.h>
11#include <linux/of.h>
12#include <linux/of_device.h>
13#include <linux/of_address.h>
14#include <linux/slab.h>
15#include <linux/of_mdio.h>
16
17#include "ll_temac.h"
18
19/* ---------------------------------------------------------------------
20 * MDIO Bus functions
21 */
22static int temac_mdio_read(struct mii_bus *bus, int phy_id, int reg)
23{
24 struct temac_local *lp = bus->priv;
25 u32 rc;
26
27 /* Write the PHY address to the MIIM Access Initiator register.
28 * When the transfer completes, the PHY register value will appear
29 * in the LSW0 register */
30 mutex_lock(&lp->indirect_mutex);
31 temac_iow(lp, XTE_LSW0_OFFSET, (phy_id << 5) | reg);
32 rc = temac_indirect_in32(lp, XTE_MIIMAI_OFFSET);
33 mutex_unlock(&lp->indirect_mutex);
34
35 dev_dbg(lp->dev, "temac_mdio_read(phy_id=%i, reg=%x) == %x\n",
36 phy_id, reg, rc);
37
38 return rc;
39}
40
41static int temac_mdio_write(struct mii_bus *bus, int phy_id, int reg, u16 val)
42{
43 struct temac_local *lp = bus->priv;
44
45 dev_dbg(lp->dev, "temac_mdio_write(phy_id=%i, reg=%x, val=%x)\n",
46 phy_id, reg, val);
47
48 /* First write the desired value into the write data register
49 * and then write the address into the access initiator register
50 */
51 mutex_lock(&lp->indirect_mutex);
52 temac_indirect_out32(lp, XTE_MGTDR_OFFSET, val);
53 temac_indirect_out32(lp, XTE_MIIMAI_OFFSET, (phy_id << 5) | reg);
54 mutex_unlock(&lp->indirect_mutex);
55
56 return 0;
57}
58
59int temac_mdio_setup(struct temac_local *lp, struct device_node *np)
60{
61 struct mii_bus *bus;
62 const u32 *bus_hz;
63 int clk_div;
64 int rc, size;
65 struct resource res;
66
67 /* Calculate a reasonable divisor for the clock rate */
68 clk_div = 0x3f; /* worst-case default setting */
69 bus_hz = of_get_property(np, "clock-frequency", &size);
70 if (bus_hz && size >= sizeof(*bus_hz)) {
71 clk_div = (*bus_hz) / (2500 * 1000 * 2) - 1;
72 if (clk_div < 1)
73 clk_div = 1;
74 if (clk_div > 0x3f)
75 clk_div = 0x3f;
76 }
77
78 /* Enable the MDIO bus by asserting the enable bit and writing
79 * in the clock config */
80 mutex_lock(&lp->indirect_mutex);
81 temac_indirect_out32(lp, XTE_MC_OFFSET, 1 << 6 | clk_div);
82 mutex_unlock(&lp->indirect_mutex);
83
84 bus = mdiobus_alloc();
85 if (!bus)
86 return -ENOMEM;
87
88 of_address_to_resource(np, 0, &res);
89 snprintf(bus->id, MII_BUS_ID_SIZE, "%.8llx",
90 (unsigned long long)res.start);
91 bus->priv = lp;
92 bus->name = "Xilinx TEMAC MDIO";
93 bus->read = temac_mdio_read;
94 bus->write = temac_mdio_write;
95 bus->parent = lp->dev;
96 bus->irq = lp->mdio_irqs; /* preallocated IRQ table */
97
98 lp->mii_bus = bus;
99
100 rc = of_mdiobus_register(bus, np);
101 if (rc)
102 goto err_register;
103
104 mutex_lock(&lp->indirect_mutex);
105 dev_dbg(lp->dev, "MDIO bus registered; MC:%x\n",
106 temac_indirect_in32(lp, XTE_MC_OFFSET));
107 mutex_unlock(&lp->indirect_mutex);
108 return 0;
109
110 err_register:
111 mdiobus_free(bus);
112 return rc;
113}
114
115void temac_mdio_teardown(struct temac_local *lp)
116{
117 mdiobus_unregister(lp->mii_bus);
118 kfree(lp->mii_bus->irq);
119 mdiobus_free(lp->mii_bus);
120 lp->mii_bus = NULL;
121}
122