Loading...
1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * USB Cypress M8 driver
4 *
5 * Copyright (C) 2004
6 * Lonnie Mendez (dignome@gmail.com)
7 * Copyright (C) 2003,2004
8 * Neil Whelchel (koyama@firstlight.net)
9 *
10 * See Documentation/usb/usb-serial.rst for more information on using this
11 * driver
12 *
13 * See http://geocities.com/i0xox0i for information on this driver and the
14 * earthmate usb device.
15 */
16
17/* Thanks to Neil Whelchel for writing the first cypress m8 implementation
18 for linux. */
19/* Thanks to cypress for providing references for the hid reports. */
20/* Thanks to Jiang Zhang for providing links and for general help. */
21/* Code originates and was built up from ftdi_sio, belkin, pl2303 and others.*/
22
23
24#include <linux/kernel.h>
25#include <linux/errno.h>
26#include <linux/slab.h>
27#include <linux/tty.h>
28#include <linux/tty_driver.h>
29#include <linux/tty_flip.h>
30#include <linux/module.h>
31#include <linux/moduleparam.h>
32#include <linux/spinlock.h>
33#include <linux/usb.h>
34#include <linux/usb/serial.h>
35#include <linux/serial.h>
36#include <linux/kfifo.h>
37#include <linux/delay.h>
38#include <linux/uaccess.h>
39#include <asm/unaligned.h>
40
41#include "cypress_m8.h"
42
43
44static bool stats;
45static int interval;
46static bool unstable_bauds;
47
48#define DRIVER_AUTHOR "Lonnie Mendez <dignome@gmail.com>, Neil Whelchel <koyama@firstlight.net>"
49#define DRIVER_DESC "Cypress USB to Serial Driver"
50
51/* write buffer size defines */
52#define CYPRESS_BUF_SIZE 1024
53
54static const struct usb_device_id id_table_earthmate[] = {
55 { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB) },
56 { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) },
57 { } /* Terminating entry */
58};
59
60static const struct usb_device_id id_table_cyphidcomrs232[] = {
61 { USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) },
62 { USB_DEVICE(VENDOR_ID_SAI, PRODUCT_ID_CYPHIDCOM) },
63 { USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) },
64 { USB_DEVICE(VENDOR_ID_FRWD, PRODUCT_ID_CYPHIDCOM_FRWD) },
65 { } /* Terminating entry */
66};
67
68static const struct usb_device_id id_table_nokiaca42v2[] = {
69 { USB_DEVICE(VENDOR_ID_DAZZLE, PRODUCT_ID_CA42) },
70 { } /* Terminating entry */
71};
72
73static const struct usb_device_id id_table_combined[] = {
74 { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB) },
75 { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) },
76 { USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) },
77 { USB_DEVICE(VENDOR_ID_SAI, PRODUCT_ID_CYPHIDCOM) },
78 { USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) },
79 { USB_DEVICE(VENDOR_ID_FRWD, PRODUCT_ID_CYPHIDCOM_FRWD) },
80 { USB_DEVICE(VENDOR_ID_DAZZLE, PRODUCT_ID_CA42) },
81 { } /* Terminating entry */
82};
83
84MODULE_DEVICE_TABLE(usb, id_table_combined);
85
86enum packet_format {
87 packet_format_1, /* b0:status, b1:payload count */
88 packet_format_2 /* b0[7:3]:status, b0[2:0]:payload count */
89};
90
91struct cypress_private {
92 spinlock_t lock; /* private lock */
93 int chiptype; /* identifier of device, for quirks/etc */
94 int bytes_in; /* used for statistics */
95 int bytes_out; /* used for statistics */
96 int cmd_count; /* used for statistics */
97 int cmd_ctrl; /* always set this to 1 before issuing a command */
98 struct kfifo write_fifo; /* write fifo */
99 int write_urb_in_use; /* write urb in use indicator */
100 int write_urb_interval; /* interval to use for write urb */
101 int read_urb_interval; /* interval to use for read urb */
102 int comm_is_ok; /* true if communication is (still) ok */
103 __u8 line_control; /* holds dtr / rts value */
104 __u8 current_status; /* received from last read - info on dsr,cts,cd,ri,etc */
105 __u8 current_config; /* stores the current configuration byte */
106 __u8 rx_flags; /* throttling - used from whiteheat/ftdi_sio */
107 enum packet_format pkt_fmt; /* format to use for packet send / receive */
108 int get_cfg_unsafe; /* If true, the CYPRESS_GET_CONFIG is unsafe */
109 int baud_rate; /* stores current baud rate in
110 integer form */
111 char prev_status; /* used for TIOCMIWAIT */
112};
113
114/* function prototypes for the Cypress USB to serial device */
115static int cypress_earthmate_port_probe(struct usb_serial_port *port);
116static int cypress_hidcom_port_probe(struct usb_serial_port *port);
117static int cypress_ca42v2_port_probe(struct usb_serial_port *port);
118static void cypress_port_remove(struct usb_serial_port *port);
119static int cypress_open(struct tty_struct *tty, struct usb_serial_port *port);
120static void cypress_close(struct usb_serial_port *port);
121static void cypress_dtr_rts(struct usb_serial_port *port, int on);
122static int cypress_write(struct tty_struct *tty, struct usb_serial_port *port,
123 const unsigned char *buf, int count);
124static void cypress_send(struct usb_serial_port *port);
125static unsigned int cypress_write_room(struct tty_struct *tty);
126static void cypress_earthmate_init_termios(struct tty_struct *tty);
127static void cypress_set_termios(struct tty_struct *tty,
128 struct usb_serial_port *port,
129 const struct ktermios *old_termios);
130static int cypress_tiocmget(struct tty_struct *tty);
131static int cypress_tiocmset(struct tty_struct *tty,
132 unsigned int set, unsigned int clear);
133static unsigned int cypress_chars_in_buffer(struct tty_struct *tty);
134static void cypress_throttle(struct tty_struct *tty);
135static void cypress_unthrottle(struct tty_struct *tty);
136static void cypress_set_dead(struct usb_serial_port *port);
137static void cypress_read_int_callback(struct urb *urb);
138static void cypress_write_int_callback(struct urb *urb);
139
140static struct usb_serial_driver cypress_earthmate_device = {
141 .driver = {
142 .owner = THIS_MODULE,
143 .name = "earthmate",
144 },
145 .description = "DeLorme Earthmate USB",
146 .id_table = id_table_earthmate,
147 .num_ports = 1,
148 .port_probe = cypress_earthmate_port_probe,
149 .port_remove = cypress_port_remove,
150 .open = cypress_open,
151 .close = cypress_close,
152 .dtr_rts = cypress_dtr_rts,
153 .write = cypress_write,
154 .write_room = cypress_write_room,
155 .init_termios = cypress_earthmate_init_termios,
156 .set_termios = cypress_set_termios,
157 .tiocmget = cypress_tiocmget,
158 .tiocmset = cypress_tiocmset,
159 .tiocmiwait = usb_serial_generic_tiocmiwait,
160 .chars_in_buffer = cypress_chars_in_buffer,
161 .throttle = cypress_throttle,
162 .unthrottle = cypress_unthrottle,
163 .read_int_callback = cypress_read_int_callback,
164 .write_int_callback = cypress_write_int_callback,
165};
166
167static struct usb_serial_driver cypress_hidcom_device = {
168 .driver = {
169 .owner = THIS_MODULE,
170 .name = "cyphidcom",
171 },
172 .description = "HID->COM RS232 Adapter",
173 .id_table = id_table_cyphidcomrs232,
174 .num_ports = 1,
175 .port_probe = cypress_hidcom_port_probe,
176 .port_remove = cypress_port_remove,
177 .open = cypress_open,
178 .close = cypress_close,
179 .dtr_rts = cypress_dtr_rts,
180 .write = cypress_write,
181 .write_room = cypress_write_room,
182 .set_termios = cypress_set_termios,
183 .tiocmget = cypress_tiocmget,
184 .tiocmset = cypress_tiocmset,
185 .tiocmiwait = usb_serial_generic_tiocmiwait,
186 .chars_in_buffer = cypress_chars_in_buffer,
187 .throttle = cypress_throttle,
188 .unthrottle = cypress_unthrottle,
189 .read_int_callback = cypress_read_int_callback,
190 .write_int_callback = cypress_write_int_callback,
191};
192
193static struct usb_serial_driver cypress_ca42v2_device = {
194 .driver = {
195 .owner = THIS_MODULE,
196 .name = "nokiaca42v2",
197 },
198 .description = "Nokia CA-42 V2 Adapter",
199 .id_table = id_table_nokiaca42v2,
200 .num_ports = 1,
201 .port_probe = cypress_ca42v2_port_probe,
202 .port_remove = cypress_port_remove,
203 .open = cypress_open,
204 .close = cypress_close,
205 .dtr_rts = cypress_dtr_rts,
206 .write = cypress_write,
207 .write_room = cypress_write_room,
208 .set_termios = cypress_set_termios,
209 .tiocmget = cypress_tiocmget,
210 .tiocmset = cypress_tiocmset,
211 .tiocmiwait = usb_serial_generic_tiocmiwait,
212 .chars_in_buffer = cypress_chars_in_buffer,
213 .throttle = cypress_throttle,
214 .unthrottle = cypress_unthrottle,
215 .read_int_callback = cypress_read_int_callback,
216 .write_int_callback = cypress_write_int_callback,
217};
218
219static struct usb_serial_driver * const serial_drivers[] = {
220 &cypress_earthmate_device, &cypress_hidcom_device,
221 &cypress_ca42v2_device, NULL
222};
223
224/*****************************************************************************
225 * Cypress serial helper functions
226 *****************************************************************************/
227
228/* FRWD Dongle hidcom needs to skip reset and speed checks */
229static inline bool is_frwd(struct usb_device *dev)
230{
231 return ((le16_to_cpu(dev->descriptor.idVendor) == VENDOR_ID_FRWD) &&
232 (le16_to_cpu(dev->descriptor.idProduct) == PRODUCT_ID_CYPHIDCOM_FRWD));
233}
234
235static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate)
236{
237 struct cypress_private *priv;
238 priv = usb_get_serial_port_data(port);
239
240 if (unstable_bauds)
241 return new_rate;
242
243 /* FRWD Dongle uses 115200 bps */
244 if (is_frwd(port->serial->dev))
245 return new_rate;
246
247 /*
248 * The general purpose firmware for the Cypress M8 allows for
249 * a maximum speed of 57600bps (I have no idea whether DeLorme
250 * chose to use the general purpose firmware or not), if you
251 * need to modify this speed setting for your own project
252 * please add your own chiptype and modify the code likewise.
253 * The Cypress HID->COM device will work successfully up to
254 * 115200bps (but the actual throughput is around 3kBps).
255 */
256 if (port->serial->dev->speed == USB_SPEED_LOW) {
257 /*
258 * Mike Isely <isely@pobox.com> 2-Feb-2008: The
259 * Cypress app note that describes this mechanism
260 * states that the low-speed part can't handle more
261 * than 800 bytes/sec, in which case 4800 baud is the
262 * safest speed for a part like that.
263 */
264 if (new_rate > 4800) {
265 dev_dbg(&port->dev,
266 "%s - failed setting baud rate, device incapable speed %d\n",
267 __func__, new_rate);
268 return -1;
269 }
270 }
271 switch (priv->chiptype) {
272 case CT_EARTHMATE:
273 if (new_rate <= 600) {
274 /* 300 and 600 baud rates are supported under
275 * the generic firmware, but are not used with
276 * NMEA and SiRF protocols */
277 dev_dbg(&port->dev,
278 "%s - failed setting baud rate, unsupported speed of %d on Earthmate GPS\n",
279 __func__, new_rate);
280 return -1;
281 }
282 break;
283 default:
284 break;
285 }
286 return new_rate;
287}
288
289
290/* This function can either set or retrieve the current serial line settings */
291static int cypress_serial_control(struct tty_struct *tty,
292 struct usb_serial_port *port, speed_t baud_rate, int data_bits,
293 int stop_bits, int parity_enable, int parity_type, int reset,
294 int cypress_request_type)
295{
296 int new_baudrate = 0, retval = 0, tries = 0;
297 struct cypress_private *priv;
298 struct device *dev = &port->dev;
299 u8 *feature_buffer;
300 const unsigned int feature_len = 5;
301 unsigned long flags;
302
303 priv = usb_get_serial_port_data(port);
304
305 if (!priv->comm_is_ok)
306 return -ENODEV;
307
308 feature_buffer = kcalloc(feature_len, sizeof(u8), GFP_KERNEL);
309 if (!feature_buffer)
310 return -ENOMEM;
311
312 switch (cypress_request_type) {
313 case CYPRESS_SET_CONFIG:
314 /* 0 means 'Hang up' so doesn't change the true bit rate */
315 new_baudrate = priv->baud_rate;
316 if (baud_rate && baud_rate != priv->baud_rate) {
317 dev_dbg(dev, "%s - baud rate is changing\n", __func__);
318 retval = analyze_baud_rate(port, baud_rate);
319 if (retval >= 0) {
320 new_baudrate = retval;
321 dev_dbg(dev, "%s - New baud rate set to %d\n",
322 __func__, new_baudrate);
323 }
324 }
325 dev_dbg(dev, "%s - baud rate is being sent as %d\n", __func__,
326 new_baudrate);
327
328 /* fill the feature_buffer with new configuration */
329 put_unaligned_le32(new_baudrate, feature_buffer);
330 feature_buffer[4] |= data_bits - 5; /* assign data bits in 2 bit space ( max 3 ) */
331 /* 1 bit gap */
332 feature_buffer[4] |= (stop_bits << 3); /* assign stop bits in 1 bit space */
333 feature_buffer[4] |= (parity_enable << 4); /* assign parity flag in 1 bit space */
334 feature_buffer[4] |= (parity_type << 5); /* assign parity type in 1 bit space */
335 /* 1 bit gap */
336 feature_buffer[4] |= (reset << 7); /* assign reset at end of byte, 1 bit space */
337
338 dev_dbg(dev, "%s - device is being sent this feature report:\n", __func__);
339 dev_dbg(dev, "%s - %02X - %02X - %02X - %02X - %02X\n", __func__,
340 feature_buffer[0], feature_buffer[1],
341 feature_buffer[2], feature_buffer[3],
342 feature_buffer[4]);
343
344 do {
345 retval = usb_control_msg(port->serial->dev,
346 usb_sndctrlpipe(port->serial->dev, 0),
347 HID_REQ_SET_REPORT,
348 USB_DIR_OUT | USB_RECIP_INTERFACE | USB_TYPE_CLASS,
349 0x0300, 0, feature_buffer,
350 feature_len, 500);
351
352 if (tries++ >= 3)
353 break;
354
355 } while (retval != feature_len &&
356 retval != -ENODEV);
357
358 if (retval != feature_len) {
359 dev_err(dev, "%s - failed sending serial line settings - %d\n",
360 __func__, retval);
361 cypress_set_dead(port);
362 } else {
363 spin_lock_irqsave(&priv->lock, flags);
364 priv->baud_rate = new_baudrate;
365 priv->current_config = feature_buffer[4];
366 spin_unlock_irqrestore(&priv->lock, flags);
367 /* If we asked for a speed change encode it */
368 if (baud_rate)
369 tty_encode_baud_rate(tty,
370 new_baudrate, new_baudrate);
371 }
372 break;
373 case CYPRESS_GET_CONFIG:
374 if (priv->get_cfg_unsafe) {
375 /* Not implemented for this device,
376 and if we try to do it we're likely
377 to crash the hardware. */
378 retval = -ENOTTY;
379 goto out;
380 }
381 dev_dbg(dev, "%s - retrieving serial line settings\n", __func__);
382 do {
383 retval = usb_control_msg(port->serial->dev,
384 usb_rcvctrlpipe(port->serial->dev, 0),
385 HID_REQ_GET_REPORT,
386 USB_DIR_IN | USB_RECIP_INTERFACE | USB_TYPE_CLASS,
387 0x0300, 0, feature_buffer,
388 feature_len, 500);
389
390 if (tries++ >= 3)
391 break;
392 } while (retval != feature_len
393 && retval != -ENODEV);
394
395 if (retval != feature_len) {
396 dev_err(dev, "%s - failed to retrieve serial line settings - %d\n",
397 __func__, retval);
398 cypress_set_dead(port);
399 goto out;
400 } else {
401 spin_lock_irqsave(&priv->lock, flags);
402 /* store the config in one byte, and later
403 use bit masks to check values */
404 priv->current_config = feature_buffer[4];
405 priv->baud_rate = get_unaligned_le32(feature_buffer);
406 spin_unlock_irqrestore(&priv->lock, flags);
407 }
408 }
409 spin_lock_irqsave(&priv->lock, flags);
410 ++priv->cmd_count;
411 spin_unlock_irqrestore(&priv->lock, flags);
412out:
413 kfree(feature_buffer);
414 return retval;
415} /* cypress_serial_control */
416
417
418static void cypress_set_dead(struct usb_serial_port *port)
419{
420 struct cypress_private *priv = usb_get_serial_port_data(port);
421 unsigned long flags;
422
423 spin_lock_irqsave(&priv->lock, flags);
424 if (!priv->comm_is_ok) {
425 spin_unlock_irqrestore(&priv->lock, flags);
426 return;
427 }
428 priv->comm_is_ok = 0;
429 spin_unlock_irqrestore(&priv->lock, flags);
430
431 dev_err(&port->dev, "cypress_m8 suspending failing port %d - "
432 "interval might be too short\n", port->port_number);
433}
434
435
436/*****************************************************************************
437 * Cypress serial driver functions
438 *****************************************************************************/
439
440
441static int cypress_generic_port_probe(struct usb_serial_port *port)
442{
443 struct usb_serial *serial = port->serial;
444 struct cypress_private *priv;
445
446 if (!port->interrupt_out_urb || !port->interrupt_in_urb) {
447 dev_err(&port->dev, "required endpoint is missing\n");
448 return -ENODEV;
449 }
450
451 priv = kzalloc(sizeof(struct cypress_private), GFP_KERNEL);
452 if (!priv)
453 return -ENOMEM;
454
455 priv->comm_is_ok = !0;
456 spin_lock_init(&priv->lock);
457 if (kfifo_alloc(&priv->write_fifo, CYPRESS_BUF_SIZE, GFP_KERNEL)) {
458 kfree(priv);
459 return -ENOMEM;
460 }
461
462 /* Skip reset for FRWD device. It is a workaound:
463 device hangs if it receives SET_CONFIGURE in Configured
464 state. */
465 if (!is_frwd(serial->dev))
466 usb_reset_configuration(serial->dev);
467
468 priv->cmd_ctrl = 0;
469 priv->line_control = 0;
470 priv->rx_flags = 0;
471 /* Default packet format setting is determined by packet size.
472 Anything with a size larger then 9 must have a separate
473 count field since the 3 bit count field is otherwise too
474 small. Otherwise we can use the slightly more compact
475 format. This is in accordance with the cypress_m8 serial
476 converter app note. */
477 if (port->interrupt_out_size > 9)
478 priv->pkt_fmt = packet_format_1;
479 else
480 priv->pkt_fmt = packet_format_2;
481
482 if (interval > 0) {
483 priv->write_urb_interval = interval;
484 priv->read_urb_interval = interval;
485 dev_dbg(&port->dev, "%s - read & write intervals forced to %d\n",
486 __func__, interval);
487 } else {
488 priv->write_urb_interval = port->interrupt_out_urb->interval;
489 priv->read_urb_interval = port->interrupt_in_urb->interval;
490 dev_dbg(&port->dev, "%s - intervals: read=%d write=%d\n",
491 __func__, priv->read_urb_interval,
492 priv->write_urb_interval);
493 }
494 usb_set_serial_port_data(port, priv);
495
496 port->port.drain_delay = 256;
497
498 return 0;
499}
500
501
502static int cypress_earthmate_port_probe(struct usb_serial_port *port)
503{
504 struct usb_serial *serial = port->serial;
505 struct cypress_private *priv;
506 int ret;
507
508 ret = cypress_generic_port_probe(port);
509 if (ret) {
510 dev_dbg(&port->dev, "%s - Failed setting up port\n", __func__);
511 return ret;
512 }
513
514 priv = usb_get_serial_port_data(port);
515 priv->chiptype = CT_EARTHMATE;
516 /* All Earthmate devices use the separated-count packet
517 format! Idiotic. */
518 priv->pkt_fmt = packet_format_1;
519 if (serial->dev->descriptor.idProduct !=
520 cpu_to_le16(PRODUCT_ID_EARTHMATEUSB)) {
521 /* The old original USB Earthmate seemed able to
522 handle GET_CONFIG requests; everything they've
523 produced since that time crashes if this command is
524 attempted :-( */
525 dev_dbg(&port->dev,
526 "%s - Marking this device as unsafe for GET_CONFIG commands\n",
527 __func__);
528 priv->get_cfg_unsafe = !0;
529 }
530
531 return 0;
532}
533
534static int cypress_hidcom_port_probe(struct usb_serial_port *port)
535{
536 struct cypress_private *priv;
537 int ret;
538
539 ret = cypress_generic_port_probe(port);
540 if (ret) {
541 dev_dbg(&port->dev, "%s - Failed setting up port\n", __func__);
542 return ret;
543 }
544
545 priv = usb_get_serial_port_data(port);
546 priv->chiptype = CT_CYPHIDCOM;
547
548 return 0;
549}
550
551static int cypress_ca42v2_port_probe(struct usb_serial_port *port)
552{
553 struct cypress_private *priv;
554 int ret;
555
556 ret = cypress_generic_port_probe(port);
557 if (ret) {
558 dev_dbg(&port->dev, "%s - Failed setting up port\n", __func__);
559 return ret;
560 }
561
562 priv = usb_get_serial_port_data(port);
563 priv->chiptype = CT_CA42V2;
564
565 return 0;
566}
567
568static void cypress_port_remove(struct usb_serial_port *port)
569{
570 struct cypress_private *priv;
571
572 priv = usb_get_serial_port_data(port);
573
574 kfifo_free(&priv->write_fifo);
575 kfree(priv);
576}
577
578static int cypress_open(struct tty_struct *tty, struct usb_serial_port *port)
579{
580 struct cypress_private *priv = usb_get_serial_port_data(port);
581 struct usb_serial *serial = port->serial;
582 unsigned long flags;
583 int result = 0;
584
585 if (!priv->comm_is_ok)
586 return -EIO;
587
588 /* clear halts before open */
589 usb_clear_halt(serial->dev, 0x81);
590 usb_clear_halt(serial->dev, 0x02);
591
592 spin_lock_irqsave(&priv->lock, flags);
593 /* reset read/write statistics */
594 priv->bytes_in = 0;
595 priv->bytes_out = 0;
596 priv->cmd_count = 0;
597 priv->rx_flags = 0;
598 spin_unlock_irqrestore(&priv->lock, flags);
599
600 /* Set termios */
601 cypress_send(port);
602
603 if (tty)
604 cypress_set_termios(tty, port, NULL);
605
606 /* setup the port and start reading from the device */
607 usb_fill_int_urb(port->interrupt_in_urb, serial->dev,
608 usb_rcvintpipe(serial->dev, port->interrupt_in_endpointAddress),
609 port->interrupt_in_urb->transfer_buffer,
610 port->interrupt_in_urb->transfer_buffer_length,
611 cypress_read_int_callback, port, priv->read_urb_interval);
612 result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
613
614 if (result) {
615 dev_err(&port->dev,
616 "%s - failed submitting read urb, error %d\n",
617 __func__, result);
618 cypress_set_dead(port);
619 }
620
621 return result;
622} /* cypress_open */
623
624static void cypress_dtr_rts(struct usb_serial_port *port, int on)
625{
626 struct cypress_private *priv = usb_get_serial_port_data(port);
627 /* drop dtr and rts */
628 spin_lock_irq(&priv->lock);
629 if (on == 0)
630 priv->line_control = 0;
631 else
632 priv->line_control = CONTROL_DTR | CONTROL_RTS;
633 priv->cmd_ctrl = 1;
634 spin_unlock_irq(&priv->lock);
635 cypress_write(NULL, port, NULL, 0);
636}
637
638static void cypress_close(struct usb_serial_port *port)
639{
640 struct cypress_private *priv = usb_get_serial_port_data(port);
641 unsigned long flags;
642
643 spin_lock_irqsave(&priv->lock, flags);
644 kfifo_reset_out(&priv->write_fifo);
645 spin_unlock_irqrestore(&priv->lock, flags);
646
647 dev_dbg(&port->dev, "%s - stopping urbs\n", __func__);
648 usb_kill_urb(port->interrupt_in_urb);
649 usb_kill_urb(port->interrupt_out_urb);
650
651 if (stats)
652 dev_info(&port->dev, "Statistics: %d Bytes In | %d Bytes Out | %d Commands Issued\n",
653 priv->bytes_in, priv->bytes_out, priv->cmd_count);
654} /* cypress_close */
655
656
657static int cypress_write(struct tty_struct *tty, struct usb_serial_port *port,
658 const unsigned char *buf, int count)
659{
660 struct cypress_private *priv = usb_get_serial_port_data(port);
661
662 dev_dbg(&port->dev, "%s - %d bytes\n", __func__, count);
663
664 /* line control commands, which need to be executed immediately,
665 are not put into the buffer for obvious reasons.
666 */
667 if (priv->cmd_ctrl) {
668 count = 0;
669 goto finish;
670 }
671
672 if (!count)
673 return count;
674
675 count = kfifo_in_locked(&priv->write_fifo, buf, count, &priv->lock);
676
677finish:
678 cypress_send(port);
679
680 return count;
681} /* cypress_write */
682
683
684static void cypress_send(struct usb_serial_port *port)
685{
686 int count = 0, result, offset, actual_size;
687 struct cypress_private *priv = usb_get_serial_port_data(port);
688 struct device *dev = &port->dev;
689 unsigned long flags;
690
691 if (!priv->comm_is_ok)
692 return;
693
694 dev_dbg(dev, "%s - interrupt out size is %d\n", __func__,
695 port->interrupt_out_size);
696
697 spin_lock_irqsave(&priv->lock, flags);
698 if (priv->write_urb_in_use) {
699 dev_dbg(dev, "%s - can't write, urb in use\n", __func__);
700 spin_unlock_irqrestore(&priv->lock, flags);
701 return;
702 }
703 spin_unlock_irqrestore(&priv->lock, flags);
704
705 /* clear buffer */
706 memset(port->interrupt_out_urb->transfer_buffer, 0,
707 port->interrupt_out_size);
708
709 spin_lock_irqsave(&priv->lock, flags);
710 switch (priv->pkt_fmt) {
711 default:
712 case packet_format_1:
713 /* this is for the CY7C64013... */
714 offset = 2;
715 port->interrupt_out_buffer[0] = priv->line_control;
716 break;
717 case packet_format_2:
718 /* this is for the CY7C63743... */
719 offset = 1;
720 port->interrupt_out_buffer[0] = priv->line_control;
721 break;
722 }
723
724 if (priv->line_control & CONTROL_RESET)
725 priv->line_control &= ~CONTROL_RESET;
726
727 if (priv->cmd_ctrl) {
728 priv->cmd_count++;
729 dev_dbg(dev, "%s - line control command being issued\n", __func__);
730 spin_unlock_irqrestore(&priv->lock, flags);
731 goto send;
732 } else
733 spin_unlock_irqrestore(&priv->lock, flags);
734
735 count = kfifo_out_locked(&priv->write_fifo,
736 &port->interrupt_out_buffer[offset],
737 port->interrupt_out_size - offset,
738 &priv->lock);
739 if (count == 0)
740 return;
741
742 switch (priv->pkt_fmt) {
743 default:
744 case packet_format_1:
745 port->interrupt_out_buffer[1] = count;
746 break;
747 case packet_format_2:
748 port->interrupt_out_buffer[0] |= count;
749 }
750
751 dev_dbg(dev, "%s - count is %d\n", __func__, count);
752
753send:
754 spin_lock_irqsave(&priv->lock, flags);
755 priv->write_urb_in_use = 1;
756 spin_unlock_irqrestore(&priv->lock, flags);
757
758 if (priv->cmd_ctrl)
759 actual_size = 1;
760 else
761 actual_size = count +
762 (priv->pkt_fmt == packet_format_1 ? 2 : 1);
763
764 usb_serial_debug_data(dev, __func__, port->interrupt_out_size,
765 port->interrupt_out_urb->transfer_buffer);
766
767 usb_fill_int_urb(port->interrupt_out_urb, port->serial->dev,
768 usb_sndintpipe(port->serial->dev, port->interrupt_out_endpointAddress),
769 port->interrupt_out_buffer, actual_size,
770 cypress_write_int_callback, port, priv->write_urb_interval);
771 result = usb_submit_urb(port->interrupt_out_urb, GFP_ATOMIC);
772 if (result) {
773 dev_err_console(port,
774 "%s - failed submitting write urb, error %d\n",
775 __func__, result);
776 priv->write_urb_in_use = 0;
777 cypress_set_dead(port);
778 }
779
780 spin_lock_irqsave(&priv->lock, flags);
781 if (priv->cmd_ctrl)
782 priv->cmd_ctrl = 0;
783
784 /* do not count the line control and size bytes */
785 priv->bytes_out += count;
786 spin_unlock_irqrestore(&priv->lock, flags);
787
788 usb_serial_port_softint(port);
789} /* cypress_send */
790
791
792/* returns how much space is available in the soft buffer */
793static unsigned int cypress_write_room(struct tty_struct *tty)
794{
795 struct usb_serial_port *port = tty->driver_data;
796 struct cypress_private *priv = usb_get_serial_port_data(port);
797 unsigned int room;
798 unsigned long flags;
799
800 spin_lock_irqsave(&priv->lock, flags);
801 room = kfifo_avail(&priv->write_fifo);
802 spin_unlock_irqrestore(&priv->lock, flags);
803
804 dev_dbg(&port->dev, "%s - returns %u\n", __func__, room);
805 return room;
806}
807
808
809static int cypress_tiocmget(struct tty_struct *tty)
810{
811 struct usb_serial_port *port = tty->driver_data;
812 struct cypress_private *priv = usb_get_serial_port_data(port);
813 __u8 status, control;
814 unsigned int result = 0;
815 unsigned long flags;
816
817 spin_lock_irqsave(&priv->lock, flags);
818 control = priv->line_control;
819 status = priv->current_status;
820 spin_unlock_irqrestore(&priv->lock, flags);
821
822 result = ((control & CONTROL_DTR) ? TIOCM_DTR : 0)
823 | ((control & CONTROL_RTS) ? TIOCM_RTS : 0)
824 | ((status & UART_CTS) ? TIOCM_CTS : 0)
825 | ((status & UART_DSR) ? TIOCM_DSR : 0)
826 | ((status & UART_RI) ? TIOCM_RI : 0)
827 | ((status & UART_CD) ? TIOCM_CD : 0);
828
829 dev_dbg(&port->dev, "%s - result = %x\n", __func__, result);
830
831 return result;
832}
833
834
835static int cypress_tiocmset(struct tty_struct *tty,
836 unsigned int set, unsigned int clear)
837{
838 struct usb_serial_port *port = tty->driver_data;
839 struct cypress_private *priv = usb_get_serial_port_data(port);
840 unsigned long flags;
841
842 spin_lock_irqsave(&priv->lock, flags);
843 if (set & TIOCM_RTS)
844 priv->line_control |= CONTROL_RTS;
845 if (set & TIOCM_DTR)
846 priv->line_control |= CONTROL_DTR;
847 if (clear & TIOCM_RTS)
848 priv->line_control &= ~CONTROL_RTS;
849 if (clear & TIOCM_DTR)
850 priv->line_control &= ~CONTROL_DTR;
851 priv->cmd_ctrl = 1;
852 spin_unlock_irqrestore(&priv->lock, flags);
853
854 return cypress_write(tty, port, NULL, 0);
855}
856
857static void cypress_earthmate_init_termios(struct tty_struct *tty)
858{
859 tty_encode_baud_rate(tty, 4800, 4800);
860}
861
862static void cypress_set_termios(struct tty_struct *tty,
863 struct usb_serial_port *port,
864 const struct ktermios *old_termios)
865{
866 struct cypress_private *priv = usb_get_serial_port_data(port);
867 struct device *dev = &port->dev;
868 int data_bits, stop_bits, parity_type, parity_enable;
869 unsigned int cflag;
870 unsigned long flags;
871 __u8 oldlines;
872 int linechange = 0;
873
874 /* Unsupported features need clearing */
875 tty->termios.c_cflag &= ~(CMSPAR|CRTSCTS);
876
877 cflag = tty->termios.c_cflag;
878
879 /* set number of data bits, parity, stop bits */
880 /* when parity is disabled the parity type bit is ignored */
881
882 /* 1 means 2 stop bits, 0 means 1 stop bit */
883 stop_bits = cflag & CSTOPB ? 1 : 0;
884
885 if (cflag & PARENB) {
886 parity_enable = 1;
887 /* 1 means odd parity, 0 means even parity */
888 parity_type = cflag & PARODD ? 1 : 0;
889 } else
890 parity_enable = parity_type = 0;
891
892 data_bits = tty_get_char_size(cflag);
893
894 spin_lock_irqsave(&priv->lock, flags);
895 oldlines = priv->line_control;
896 if ((cflag & CBAUD) == B0) {
897 /* drop dtr and rts */
898 dev_dbg(dev, "%s - dropping the lines, baud rate 0bps\n", __func__);
899 priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
900 } else
901 priv->line_control = (CONTROL_DTR | CONTROL_RTS);
902 spin_unlock_irqrestore(&priv->lock, flags);
903
904 dev_dbg(dev, "%s - sending %d stop_bits, %d parity_enable, %d parity_type, %d data_bits (+5)\n",
905 __func__, stop_bits, parity_enable, parity_type, data_bits);
906
907 cypress_serial_control(tty, port, tty_get_baud_rate(tty),
908 data_bits, stop_bits,
909 parity_enable, parity_type,
910 0, CYPRESS_SET_CONFIG);
911
912 /* we perform a CYPRESS_GET_CONFIG so that the current settings are
913 * filled into the private structure this should confirm that all is
914 * working if it returns what we just set */
915 cypress_serial_control(tty, port, 0, 0, 0, 0, 0, 0, CYPRESS_GET_CONFIG);
916
917 /* Here we can define custom tty settings for devices; the main tty
918 * termios flag base comes from empeg.c */
919
920 spin_lock_irqsave(&priv->lock, flags);
921 if (priv->chiptype == CT_EARTHMATE && priv->baud_rate == 4800) {
922 dev_dbg(dev, "Using custom termios settings for a baud rate of 4800bps.\n");
923 /* define custom termios settings for NMEA protocol */
924
925 tty->termios.c_iflag /* input modes - */
926 &= ~(IGNBRK /* disable ignore break */
927 | BRKINT /* disable break causes interrupt */
928 | PARMRK /* disable mark parity errors */
929 | ISTRIP /* disable clear high bit of input char */
930 | INLCR /* disable translate NL to CR */
931 | IGNCR /* disable ignore CR */
932 | ICRNL /* disable translate CR to NL */
933 | IXON); /* disable enable XON/XOFF flow control */
934
935 tty->termios.c_oflag /* output modes */
936 &= ~OPOST; /* disable postprocess output char */
937
938 tty->termios.c_lflag /* line discipline modes */
939 &= ~(ECHO /* disable echo input characters */
940 | ECHONL /* disable echo new line */
941 | ICANON /* disable erase, kill, werase, and rprnt
942 special characters */
943 | ISIG /* disable interrupt, quit, and suspend
944 special characters */
945 | IEXTEN); /* disable non-POSIX special characters */
946 } /* CT_CYPHIDCOM: Application should handle this for device */
947
948 linechange = (priv->line_control != oldlines);
949 spin_unlock_irqrestore(&priv->lock, flags);
950
951 /* if necessary, set lines */
952 if (linechange) {
953 priv->cmd_ctrl = 1;
954 cypress_write(tty, port, NULL, 0);
955 }
956} /* cypress_set_termios */
957
958
959/* returns amount of data still left in soft buffer */
960static unsigned int cypress_chars_in_buffer(struct tty_struct *tty)
961{
962 struct usb_serial_port *port = tty->driver_data;
963 struct cypress_private *priv = usb_get_serial_port_data(port);
964 unsigned int chars;
965 unsigned long flags;
966
967 spin_lock_irqsave(&priv->lock, flags);
968 chars = kfifo_len(&priv->write_fifo);
969 spin_unlock_irqrestore(&priv->lock, flags);
970
971 dev_dbg(&port->dev, "%s - returns %u\n", __func__, chars);
972 return chars;
973}
974
975
976static void cypress_throttle(struct tty_struct *tty)
977{
978 struct usb_serial_port *port = tty->driver_data;
979 struct cypress_private *priv = usb_get_serial_port_data(port);
980
981 spin_lock_irq(&priv->lock);
982 priv->rx_flags = THROTTLED;
983 spin_unlock_irq(&priv->lock);
984}
985
986
987static void cypress_unthrottle(struct tty_struct *tty)
988{
989 struct usb_serial_port *port = tty->driver_data;
990 struct cypress_private *priv = usb_get_serial_port_data(port);
991 int actually_throttled, result;
992
993 spin_lock_irq(&priv->lock);
994 actually_throttled = priv->rx_flags & ACTUALLY_THROTTLED;
995 priv->rx_flags = 0;
996 spin_unlock_irq(&priv->lock);
997
998 if (!priv->comm_is_ok)
999 return;
1000
1001 if (actually_throttled) {
1002 result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
1003 if (result) {
1004 dev_err(&port->dev, "%s - failed submitting read urb, "
1005 "error %d\n", __func__, result);
1006 cypress_set_dead(port);
1007 }
1008 }
1009}
1010
1011
1012static void cypress_read_int_callback(struct urb *urb)
1013{
1014 struct usb_serial_port *port = urb->context;
1015 struct cypress_private *priv = usb_get_serial_port_data(port);
1016 struct device *dev = &urb->dev->dev;
1017 struct tty_struct *tty;
1018 unsigned char *data = urb->transfer_buffer;
1019 unsigned long flags;
1020 char tty_flag = TTY_NORMAL;
1021 int bytes = 0;
1022 int result;
1023 int i = 0;
1024 int status = urb->status;
1025
1026 switch (status) {
1027 case 0: /* success */
1028 break;
1029 case -ECONNRESET:
1030 case -ENOENT:
1031 case -ESHUTDOWN:
1032 /* precursor to disconnect so just go away */
1033 return;
1034 case -EPIPE:
1035 /* Can't call usb_clear_halt while in_interrupt */
1036 fallthrough;
1037 default:
1038 /* something ugly is going on... */
1039 dev_err(dev, "%s - unexpected nonzero read status received: %d\n",
1040 __func__, status);
1041 cypress_set_dead(port);
1042 return;
1043 }
1044
1045 spin_lock_irqsave(&priv->lock, flags);
1046 if (priv->rx_flags & THROTTLED) {
1047 dev_dbg(dev, "%s - now throttling\n", __func__);
1048 priv->rx_flags |= ACTUALLY_THROTTLED;
1049 spin_unlock_irqrestore(&priv->lock, flags);
1050 return;
1051 }
1052 spin_unlock_irqrestore(&priv->lock, flags);
1053
1054 tty = tty_port_tty_get(&port->port);
1055 if (!tty) {
1056 dev_dbg(dev, "%s - bad tty pointer - exiting\n", __func__);
1057 return;
1058 }
1059
1060 spin_lock_irqsave(&priv->lock, flags);
1061 result = urb->actual_length;
1062 switch (priv->pkt_fmt) {
1063 default:
1064 case packet_format_1:
1065 /* This is for the CY7C64013... */
1066 priv->current_status = data[0] & 0xF8;
1067 bytes = data[1] + 2;
1068 i = 2;
1069 break;
1070 case packet_format_2:
1071 /* This is for the CY7C63743... */
1072 priv->current_status = data[0] & 0xF8;
1073 bytes = (data[0] & 0x07) + 1;
1074 i = 1;
1075 break;
1076 }
1077 spin_unlock_irqrestore(&priv->lock, flags);
1078 if (result < bytes) {
1079 dev_dbg(dev,
1080 "%s - wrong packet size - received %d bytes but packet said %d bytes\n",
1081 __func__, result, bytes);
1082 goto continue_read;
1083 }
1084
1085 usb_serial_debug_data(&port->dev, __func__, urb->actual_length, data);
1086
1087 spin_lock_irqsave(&priv->lock, flags);
1088 /* check to see if status has changed */
1089 if (priv->current_status != priv->prev_status) {
1090 u8 delta = priv->current_status ^ priv->prev_status;
1091
1092 if (delta & UART_MSR_MASK) {
1093 if (delta & UART_CTS)
1094 port->icount.cts++;
1095 if (delta & UART_DSR)
1096 port->icount.dsr++;
1097 if (delta & UART_RI)
1098 port->icount.rng++;
1099 if (delta & UART_CD)
1100 port->icount.dcd++;
1101
1102 wake_up_interruptible(&port->port.delta_msr_wait);
1103 }
1104
1105 priv->prev_status = priv->current_status;
1106 }
1107 spin_unlock_irqrestore(&priv->lock, flags);
1108
1109 /* hangup, as defined in acm.c... this might be a bad place for it
1110 * though */
1111 if (tty && !C_CLOCAL(tty) && !(priv->current_status & UART_CD)) {
1112 dev_dbg(dev, "%s - calling hangup\n", __func__);
1113 tty_hangup(tty);
1114 goto continue_read;
1115 }
1116
1117 /* There is one error bit... I'm assuming it is a parity error
1118 * indicator as the generic firmware will set this bit to 1 if a
1119 * parity error occurs.
1120 * I can not find reference to any other error events. */
1121 spin_lock_irqsave(&priv->lock, flags);
1122 if (priv->current_status & CYP_ERROR) {
1123 spin_unlock_irqrestore(&priv->lock, flags);
1124 tty_flag = TTY_PARITY;
1125 dev_dbg(dev, "%s - Parity Error detected\n", __func__);
1126 } else
1127 spin_unlock_irqrestore(&priv->lock, flags);
1128
1129 /* process read if there is data other than line status */
1130 if (bytes > i) {
1131 tty_insert_flip_string_fixed_flag(&port->port, data + i,
1132 tty_flag, bytes - i);
1133 tty_flip_buffer_push(&port->port);
1134 }
1135
1136 spin_lock_irqsave(&priv->lock, flags);
1137 /* control and status byte(s) are also counted */
1138 priv->bytes_in += bytes;
1139 spin_unlock_irqrestore(&priv->lock, flags);
1140
1141continue_read:
1142 tty_kref_put(tty);
1143
1144 /* Continue trying to always read */
1145
1146 if (priv->comm_is_ok) {
1147 usb_fill_int_urb(port->interrupt_in_urb, port->serial->dev,
1148 usb_rcvintpipe(port->serial->dev,
1149 port->interrupt_in_endpointAddress),
1150 port->interrupt_in_urb->transfer_buffer,
1151 port->interrupt_in_urb->transfer_buffer_length,
1152 cypress_read_int_callback, port,
1153 priv->read_urb_interval);
1154 result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
1155 if (result && result != -EPERM) {
1156 dev_err(dev, "%s - failed resubmitting read urb, error %d\n",
1157 __func__, result);
1158 cypress_set_dead(port);
1159 }
1160 }
1161} /* cypress_read_int_callback */
1162
1163
1164static void cypress_write_int_callback(struct urb *urb)
1165{
1166 struct usb_serial_port *port = urb->context;
1167 struct cypress_private *priv = usb_get_serial_port_data(port);
1168 struct device *dev = &urb->dev->dev;
1169 int status = urb->status;
1170
1171 switch (status) {
1172 case 0:
1173 /* success */
1174 break;
1175 case -ECONNRESET:
1176 case -ENOENT:
1177 case -ESHUTDOWN:
1178 /* this urb is terminated, clean up */
1179 dev_dbg(dev, "%s - urb shutting down with status: %d\n",
1180 __func__, status);
1181 priv->write_urb_in_use = 0;
1182 return;
1183 case -EPIPE:
1184 /* Cannot call usb_clear_halt while in_interrupt */
1185 fallthrough;
1186 default:
1187 dev_err(dev, "%s - unexpected nonzero write status received: %d\n",
1188 __func__, status);
1189 cypress_set_dead(port);
1190 break;
1191 }
1192 priv->write_urb_in_use = 0;
1193
1194 /* send any buffered data */
1195 cypress_send(port);
1196}
1197
1198module_usb_serial_driver(serial_drivers, id_table_combined);
1199
1200MODULE_AUTHOR(DRIVER_AUTHOR);
1201MODULE_DESCRIPTION(DRIVER_DESC);
1202MODULE_LICENSE("GPL");
1203
1204module_param(stats, bool, 0644);
1205MODULE_PARM_DESC(stats, "Enable statistics or not");
1206module_param(interval, int, 0644);
1207MODULE_PARM_DESC(interval, "Overrides interrupt interval");
1208module_param(unstable_bauds, bool, 0644);
1209MODULE_PARM_DESC(unstable_bauds, "Allow unstable baud rates");
1/*
2 * USB Cypress M8 driver
3 *
4 * Copyright (C) 2004
5 * Lonnie Mendez (dignome@gmail.com)
6 * Copyright (C) 2003,2004
7 * Neil Whelchel (koyama@firstlight.net)
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation; either version 2 of the License, or
12 * (at your option) any later version.
13 *
14 * See Documentation/usb/usb-serial.txt for more information on using this
15 * driver
16 *
17 * See http://geocities.com/i0xox0i for information on this driver and the
18 * earthmate usb device.
19 */
20
21/* Thanks to Neil Whelchel for writing the first cypress m8 implementation
22 for linux. */
23/* Thanks to cypress for providing references for the hid reports. */
24/* Thanks to Jiang Zhang for providing links and for general help. */
25/* Code originates and was built up from ftdi_sio, belkin, pl2303 and others.*/
26
27
28#include <linux/kernel.h>
29#include <linux/errno.h>
30#include <linux/init.h>
31#include <linux/slab.h>
32#include <linux/tty.h>
33#include <linux/tty_driver.h>
34#include <linux/tty_flip.h>
35#include <linux/module.h>
36#include <linux/moduleparam.h>
37#include <linux/spinlock.h>
38#include <linux/usb.h>
39#include <linux/usb/serial.h>
40#include <linux/serial.h>
41#include <linux/kfifo.h>
42#include <linux/delay.h>
43#include <linux/uaccess.h>
44#include <asm/unaligned.h>
45
46#include "cypress_m8.h"
47
48
49static bool debug;
50static bool stats;
51static int interval;
52static bool unstable_bauds;
53
54/*
55 * Version Information
56 */
57#define DRIVER_VERSION "v1.10"
58#define DRIVER_AUTHOR "Lonnie Mendez <dignome@gmail.com>, Neil Whelchel <koyama@firstlight.net>"
59#define DRIVER_DESC "Cypress USB to Serial Driver"
60
61/* write buffer size defines */
62#define CYPRESS_BUF_SIZE 1024
63
64static const struct usb_device_id id_table_earthmate[] = {
65 { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB) },
66 { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) },
67 { } /* Terminating entry */
68};
69
70static const struct usb_device_id id_table_cyphidcomrs232[] = {
71 { USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) },
72 { USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) },
73 { } /* Terminating entry */
74};
75
76static const struct usb_device_id id_table_nokiaca42v2[] = {
77 { USB_DEVICE(VENDOR_ID_DAZZLE, PRODUCT_ID_CA42) },
78 { } /* Terminating entry */
79};
80
81static const struct usb_device_id id_table_combined[] = {
82 { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB) },
83 { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) },
84 { USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) },
85 { USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) },
86 { USB_DEVICE(VENDOR_ID_DAZZLE, PRODUCT_ID_CA42) },
87 { } /* Terminating entry */
88};
89
90MODULE_DEVICE_TABLE(usb, id_table_combined);
91
92enum packet_format {
93 packet_format_1, /* b0:status, b1:payload count */
94 packet_format_2 /* b0[7:3]:status, b0[2:0]:payload count */
95};
96
97struct cypress_private {
98 spinlock_t lock; /* private lock */
99 int chiptype; /* identifier of device, for quirks/etc */
100 int bytes_in; /* used for statistics */
101 int bytes_out; /* used for statistics */
102 int cmd_count; /* used for statistics */
103 int cmd_ctrl; /* always set this to 1 before issuing a command */
104 struct kfifo write_fifo; /* write fifo */
105 int write_urb_in_use; /* write urb in use indicator */
106 int write_urb_interval; /* interval to use for write urb */
107 int read_urb_interval; /* interval to use for read urb */
108 int comm_is_ok; /* true if communication is (still) ok */
109 int termios_initialized;
110 __u8 line_control; /* holds dtr / rts value */
111 __u8 current_status; /* received from last read - info on dsr,cts,cd,ri,etc */
112 __u8 current_config; /* stores the current configuration byte */
113 __u8 rx_flags; /* throttling - used from whiteheat/ftdi_sio */
114 enum packet_format pkt_fmt; /* format to use for packet send / receive */
115 int get_cfg_unsafe; /* If true, the CYPRESS_GET_CONFIG is unsafe */
116 int baud_rate; /* stores current baud rate in
117 integer form */
118 int isthrottled; /* if throttled, discard reads */
119 wait_queue_head_t delta_msr_wait; /* used for TIOCMIWAIT */
120 char prev_status, diff_status; /* used for TIOCMIWAIT */
121 /* we pass a pointer to this as the argument sent to
122 cypress_set_termios old_termios */
123 struct ktermios tmp_termios; /* stores the old termios settings */
124};
125
126/* function prototypes for the Cypress USB to serial device */
127static int cypress_earthmate_startup(struct usb_serial *serial);
128static int cypress_hidcom_startup(struct usb_serial *serial);
129static int cypress_ca42v2_startup(struct usb_serial *serial);
130static void cypress_release(struct usb_serial *serial);
131static int cypress_open(struct tty_struct *tty, struct usb_serial_port *port);
132static void cypress_close(struct usb_serial_port *port);
133static void cypress_dtr_rts(struct usb_serial_port *port, int on);
134static int cypress_write(struct tty_struct *tty, struct usb_serial_port *port,
135 const unsigned char *buf, int count);
136static void cypress_send(struct usb_serial_port *port);
137static int cypress_write_room(struct tty_struct *tty);
138static int cypress_ioctl(struct tty_struct *tty,
139 unsigned int cmd, unsigned long arg);
140static void cypress_set_termios(struct tty_struct *tty,
141 struct usb_serial_port *port, struct ktermios *old);
142static int cypress_tiocmget(struct tty_struct *tty);
143static int cypress_tiocmset(struct tty_struct *tty,
144 unsigned int set, unsigned int clear);
145static int cypress_chars_in_buffer(struct tty_struct *tty);
146static void cypress_throttle(struct tty_struct *tty);
147static void cypress_unthrottle(struct tty_struct *tty);
148static void cypress_set_dead(struct usb_serial_port *port);
149static void cypress_read_int_callback(struct urb *urb);
150static void cypress_write_int_callback(struct urb *urb);
151
152static struct usb_serial_driver cypress_earthmate_device = {
153 .driver = {
154 .owner = THIS_MODULE,
155 .name = "earthmate",
156 },
157 .description = "DeLorme Earthmate USB",
158 .id_table = id_table_earthmate,
159 .num_ports = 1,
160 .attach = cypress_earthmate_startup,
161 .release = cypress_release,
162 .open = cypress_open,
163 .close = cypress_close,
164 .dtr_rts = cypress_dtr_rts,
165 .write = cypress_write,
166 .write_room = cypress_write_room,
167 .ioctl = cypress_ioctl,
168 .set_termios = cypress_set_termios,
169 .tiocmget = cypress_tiocmget,
170 .tiocmset = cypress_tiocmset,
171 .chars_in_buffer = cypress_chars_in_buffer,
172 .throttle = cypress_throttle,
173 .unthrottle = cypress_unthrottle,
174 .read_int_callback = cypress_read_int_callback,
175 .write_int_callback = cypress_write_int_callback,
176};
177
178static struct usb_serial_driver cypress_hidcom_device = {
179 .driver = {
180 .owner = THIS_MODULE,
181 .name = "cyphidcom",
182 },
183 .description = "HID->COM RS232 Adapter",
184 .id_table = id_table_cyphidcomrs232,
185 .num_ports = 1,
186 .attach = cypress_hidcom_startup,
187 .release = cypress_release,
188 .open = cypress_open,
189 .close = cypress_close,
190 .dtr_rts = cypress_dtr_rts,
191 .write = cypress_write,
192 .write_room = cypress_write_room,
193 .ioctl = cypress_ioctl,
194 .set_termios = cypress_set_termios,
195 .tiocmget = cypress_tiocmget,
196 .tiocmset = cypress_tiocmset,
197 .chars_in_buffer = cypress_chars_in_buffer,
198 .throttle = cypress_throttle,
199 .unthrottle = cypress_unthrottle,
200 .read_int_callback = cypress_read_int_callback,
201 .write_int_callback = cypress_write_int_callback,
202};
203
204static struct usb_serial_driver cypress_ca42v2_device = {
205 .driver = {
206 .owner = THIS_MODULE,
207 .name = "nokiaca42v2",
208 },
209 .description = "Nokia CA-42 V2 Adapter",
210 .id_table = id_table_nokiaca42v2,
211 .num_ports = 1,
212 .attach = cypress_ca42v2_startup,
213 .release = cypress_release,
214 .open = cypress_open,
215 .close = cypress_close,
216 .dtr_rts = cypress_dtr_rts,
217 .write = cypress_write,
218 .write_room = cypress_write_room,
219 .ioctl = cypress_ioctl,
220 .set_termios = cypress_set_termios,
221 .tiocmget = cypress_tiocmget,
222 .tiocmset = cypress_tiocmset,
223 .chars_in_buffer = cypress_chars_in_buffer,
224 .throttle = cypress_throttle,
225 .unthrottle = cypress_unthrottle,
226 .read_int_callback = cypress_read_int_callback,
227 .write_int_callback = cypress_write_int_callback,
228};
229
230static struct usb_serial_driver * const serial_drivers[] = {
231 &cypress_earthmate_device, &cypress_hidcom_device,
232 &cypress_ca42v2_device, NULL
233};
234
235/*****************************************************************************
236 * Cypress serial helper functions
237 *****************************************************************************/
238
239
240static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate)
241{
242 struct cypress_private *priv;
243 priv = usb_get_serial_port_data(port);
244
245 if (unstable_bauds)
246 return new_rate;
247
248 /*
249 * The general purpose firmware for the Cypress M8 allows for
250 * a maximum speed of 57600bps (I have no idea whether DeLorme
251 * chose to use the general purpose firmware or not), if you
252 * need to modify this speed setting for your own project
253 * please add your own chiptype and modify the code likewise.
254 * The Cypress HID->COM device will work successfully up to
255 * 115200bps (but the actual throughput is around 3kBps).
256 */
257 if (port->serial->dev->speed == USB_SPEED_LOW) {
258 /*
259 * Mike Isely <isely@pobox.com> 2-Feb-2008: The
260 * Cypress app note that describes this mechanism
261 * states the the low-speed part can't handle more
262 * than 800 bytes/sec, in which case 4800 baud is the
263 * safest speed for a part like that.
264 */
265 if (new_rate > 4800) {
266 dbg("%s - failed setting baud rate, device incapable "
267 "speed %d", __func__, new_rate);
268 return -1;
269 }
270 }
271 switch (priv->chiptype) {
272 case CT_EARTHMATE:
273 if (new_rate <= 600) {
274 /* 300 and 600 baud rates are supported under
275 * the generic firmware, but are not used with
276 * NMEA and SiRF protocols */
277 dbg("%s - failed setting baud rate, unsupported speed "
278 "of %d on Earthmate GPS", __func__, new_rate);
279 return -1;
280 }
281 break;
282 default:
283 break;
284 }
285 return new_rate;
286}
287
288
289/* This function can either set or retrieve the current serial line settings */
290static int cypress_serial_control(struct tty_struct *tty,
291 struct usb_serial_port *port, speed_t baud_rate, int data_bits,
292 int stop_bits, int parity_enable, int parity_type, int reset,
293 int cypress_request_type)
294{
295 int new_baudrate = 0, retval = 0, tries = 0;
296 struct cypress_private *priv;
297 u8 *feature_buffer;
298 const unsigned int feature_len = 5;
299 unsigned long flags;
300
301 priv = usb_get_serial_port_data(port);
302
303 if (!priv->comm_is_ok)
304 return -ENODEV;
305
306 feature_buffer = kcalloc(feature_len, sizeof(u8), GFP_KERNEL);
307 if (!feature_buffer)
308 return -ENOMEM;
309
310 switch (cypress_request_type) {
311 case CYPRESS_SET_CONFIG:
312 /* 0 means 'Hang up' so doesn't change the true bit rate */
313 new_baudrate = priv->baud_rate;
314 if (baud_rate && baud_rate != priv->baud_rate) {
315 dbg("%s - baud rate is changing", __func__);
316 retval = analyze_baud_rate(port, baud_rate);
317 if (retval >= 0) {
318 new_baudrate = retval;
319 dbg("%s - New baud rate set to %d",
320 __func__, new_baudrate);
321 }
322 }
323 dbg("%s - baud rate is being sent as %d",
324 __func__, new_baudrate);
325
326 /* fill the feature_buffer with new configuration */
327 put_unaligned_le32(new_baudrate, feature_buffer);
328 feature_buffer[4] |= data_bits; /* assign data bits in 2 bit space ( max 3 ) */
329 /* 1 bit gap */
330 feature_buffer[4] |= (stop_bits << 3); /* assign stop bits in 1 bit space */
331 feature_buffer[4] |= (parity_enable << 4); /* assign parity flag in 1 bit space */
332 feature_buffer[4] |= (parity_type << 5); /* assign parity type in 1 bit space */
333 /* 1 bit gap */
334 feature_buffer[4] |= (reset << 7); /* assign reset at end of byte, 1 bit space */
335
336 dbg("%s - device is being sent this feature report:",
337 __func__);
338 dbg("%s - %02X - %02X - %02X - %02X - %02X", __func__,
339 feature_buffer[0], feature_buffer[1],
340 feature_buffer[2], feature_buffer[3],
341 feature_buffer[4]);
342
343 do {
344 retval = usb_control_msg(port->serial->dev,
345 usb_sndctrlpipe(port->serial->dev, 0),
346 HID_REQ_SET_REPORT,
347 USB_DIR_OUT | USB_RECIP_INTERFACE | USB_TYPE_CLASS,
348 0x0300, 0, feature_buffer,
349 feature_len, 500);
350
351 if (tries++ >= 3)
352 break;
353
354 } while (retval != feature_len &&
355 retval != -ENODEV);
356
357 if (retval != feature_len) {
358 dev_err(&port->dev, "%s - failed sending serial "
359 "line settings - %d\n", __func__, retval);
360 cypress_set_dead(port);
361 } else {
362 spin_lock_irqsave(&priv->lock, flags);
363 priv->baud_rate = new_baudrate;
364 priv->current_config = feature_buffer[4];
365 spin_unlock_irqrestore(&priv->lock, flags);
366 /* If we asked for a speed change encode it */
367 if (baud_rate)
368 tty_encode_baud_rate(tty,
369 new_baudrate, new_baudrate);
370 }
371 break;
372 case CYPRESS_GET_CONFIG:
373 if (priv->get_cfg_unsafe) {
374 /* Not implemented for this device,
375 and if we try to do it we're likely
376 to crash the hardware. */
377 retval = -ENOTTY;
378 goto out;
379 }
380 dbg("%s - retreiving serial line settings", __func__);
381 do {
382 retval = usb_control_msg(port->serial->dev,
383 usb_rcvctrlpipe(port->serial->dev, 0),
384 HID_REQ_GET_REPORT,
385 USB_DIR_IN | USB_RECIP_INTERFACE | USB_TYPE_CLASS,
386 0x0300, 0, feature_buffer,
387 feature_len, 500);
388
389 if (tries++ >= 3)
390 break;
391 } while (retval != feature_len
392 && retval != -ENODEV);
393
394 if (retval != feature_len) {
395 dev_err(&port->dev, "%s - failed to retrieve serial "
396 "line settings - %d\n", __func__, retval);
397 cypress_set_dead(port);
398 goto out;
399 } else {
400 spin_lock_irqsave(&priv->lock, flags);
401 /* store the config in one byte, and later
402 use bit masks to check values */
403 priv->current_config = feature_buffer[4];
404 priv->baud_rate = get_unaligned_le32(feature_buffer);
405 spin_unlock_irqrestore(&priv->lock, flags);
406 }
407 }
408 spin_lock_irqsave(&priv->lock, flags);
409 ++priv->cmd_count;
410 spin_unlock_irqrestore(&priv->lock, flags);
411out:
412 kfree(feature_buffer);
413 return retval;
414} /* cypress_serial_control */
415
416
417static void cypress_set_dead(struct usb_serial_port *port)
418{
419 struct cypress_private *priv = usb_get_serial_port_data(port);
420 unsigned long flags;
421
422 spin_lock_irqsave(&priv->lock, flags);
423 if (!priv->comm_is_ok) {
424 spin_unlock_irqrestore(&priv->lock, flags);
425 return;
426 }
427 priv->comm_is_ok = 0;
428 spin_unlock_irqrestore(&priv->lock, flags);
429
430 dev_err(&port->dev, "cypress_m8 suspending failing port %d - "
431 "interval might be too short\n", port->number);
432}
433
434
435/*****************************************************************************
436 * Cypress serial driver functions
437 *****************************************************************************/
438
439
440static int generic_startup(struct usb_serial *serial)
441{
442 struct cypress_private *priv;
443 struct usb_serial_port *port = serial->port[0];
444
445 priv = kzalloc(sizeof(struct cypress_private), GFP_KERNEL);
446 if (!priv)
447 return -ENOMEM;
448
449 priv->comm_is_ok = !0;
450 spin_lock_init(&priv->lock);
451 if (kfifo_alloc(&priv->write_fifo, CYPRESS_BUF_SIZE, GFP_KERNEL)) {
452 kfree(priv);
453 return -ENOMEM;
454 }
455 init_waitqueue_head(&priv->delta_msr_wait);
456
457 usb_reset_configuration(serial->dev);
458
459 priv->cmd_ctrl = 0;
460 priv->line_control = 0;
461 priv->termios_initialized = 0;
462 priv->rx_flags = 0;
463 /* Default packet format setting is determined by packet size.
464 Anything with a size larger then 9 must have a separate
465 count field since the 3 bit count field is otherwise too
466 small. Otherwise we can use the slightly more compact
467 format. This is in accordance with the cypress_m8 serial
468 converter app note. */
469 if (port->interrupt_out_size > 9)
470 priv->pkt_fmt = packet_format_1;
471 else
472 priv->pkt_fmt = packet_format_2;
473
474 if (interval > 0) {
475 priv->write_urb_interval = interval;
476 priv->read_urb_interval = interval;
477 dbg("%s - port %d read & write intervals forced to %d",
478 __func__, port->number, interval);
479 } else {
480 priv->write_urb_interval = port->interrupt_out_urb->interval;
481 priv->read_urb_interval = port->interrupt_in_urb->interval;
482 dbg("%s - port %d intervals: read=%d write=%d",
483 __func__, port->number,
484 priv->read_urb_interval, priv->write_urb_interval);
485 }
486 usb_set_serial_port_data(port, priv);
487
488 return 0;
489}
490
491
492static int cypress_earthmate_startup(struct usb_serial *serial)
493{
494 struct cypress_private *priv;
495 struct usb_serial_port *port = serial->port[0];
496
497 if (generic_startup(serial)) {
498 dbg("%s - Failed setting up port %d", __func__,
499 port->number);
500 return 1;
501 }
502
503 priv = usb_get_serial_port_data(port);
504 priv->chiptype = CT_EARTHMATE;
505 /* All Earthmate devices use the separated-count packet
506 format! Idiotic. */
507 priv->pkt_fmt = packet_format_1;
508 if (serial->dev->descriptor.idProduct !=
509 cpu_to_le16(PRODUCT_ID_EARTHMATEUSB)) {
510 /* The old original USB Earthmate seemed able to
511 handle GET_CONFIG requests; everything they've
512 produced since that time crashes if this command is
513 attempted :-( */
514 dbg("%s - Marking this device as unsafe for GET_CONFIG "
515 "commands", __func__);
516 priv->get_cfg_unsafe = !0;
517 }
518
519 return 0;
520} /* cypress_earthmate_startup */
521
522
523static int cypress_hidcom_startup(struct usb_serial *serial)
524{
525 struct cypress_private *priv;
526
527 if (generic_startup(serial)) {
528 dbg("%s - Failed setting up port %d", __func__,
529 serial->port[0]->number);
530 return 1;
531 }
532
533 priv = usb_get_serial_port_data(serial->port[0]);
534 priv->chiptype = CT_CYPHIDCOM;
535
536 return 0;
537} /* cypress_hidcom_startup */
538
539
540static int cypress_ca42v2_startup(struct usb_serial *serial)
541{
542 struct cypress_private *priv;
543
544 if (generic_startup(serial)) {
545 dbg("%s - Failed setting up port %d", __func__,
546 serial->port[0]->number);
547 return 1;
548 }
549
550 priv = usb_get_serial_port_data(serial->port[0]);
551 priv->chiptype = CT_CA42V2;
552
553 return 0;
554} /* cypress_ca42v2_startup */
555
556
557static void cypress_release(struct usb_serial *serial)
558{
559 struct cypress_private *priv;
560
561 /* all open ports are closed at this point */
562 priv = usb_get_serial_port_data(serial->port[0]);
563
564 if (priv) {
565 kfifo_free(&priv->write_fifo);
566 kfree(priv);
567 }
568}
569
570
571static int cypress_open(struct tty_struct *tty, struct usb_serial_port *port)
572{
573 struct cypress_private *priv = usb_get_serial_port_data(port);
574 struct usb_serial *serial = port->serial;
575 unsigned long flags;
576 int result = 0;
577
578 if (!priv->comm_is_ok)
579 return -EIO;
580
581 /* clear halts before open */
582 usb_clear_halt(serial->dev, 0x81);
583 usb_clear_halt(serial->dev, 0x02);
584
585 spin_lock_irqsave(&priv->lock, flags);
586 /* reset read/write statistics */
587 priv->bytes_in = 0;
588 priv->bytes_out = 0;
589 priv->cmd_count = 0;
590 priv->rx_flags = 0;
591 spin_unlock_irqrestore(&priv->lock, flags);
592
593 /* Set termios */
594 cypress_send(port);
595
596 if (tty)
597 cypress_set_termios(tty, port, &priv->tmp_termios);
598
599 /* setup the port and start reading from the device */
600 if (!port->interrupt_in_urb) {
601 dev_err(&port->dev, "%s - interrupt_in_urb is empty!\n",
602 __func__);
603 return -1;
604 }
605
606 usb_fill_int_urb(port->interrupt_in_urb, serial->dev,
607 usb_rcvintpipe(serial->dev, port->interrupt_in_endpointAddress),
608 port->interrupt_in_urb->transfer_buffer,
609 port->interrupt_in_urb->transfer_buffer_length,
610 cypress_read_int_callback, port, priv->read_urb_interval);
611 result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
612
613 if (result) {
614 dev_err(&port->dev,
615 "%s - failed submitting read urb, error %d\n",
616 __func__, result);
617 cypress_set_dead(port);
618 }
619 port->port.drain_delay = 256;
620 return result;
621} /* cypress_open */
622
623static void cypress_dtr_rts(struct usb_serial_port *port, int on)
624{
625 struct cypress_private *priv = usb_get_serial_port_data(port);
626 /* drop dtr and rts */
627 spin_lock_irq(&priv->lock);
628 if (on == 0)
629 priv->line_control = 0;
630 else
631 priv->line_control = CONTROL_DTR | CONTROL_RTS;
632 priv->cmd_ctrl = 1;
633 spin_unlock_irq(&priv->lock);
634 cypress_write(NULL, port, NULL, 0);
635}
636
637static void cypress_close(struct usb_serial_port *port)
638{
639 struct cypress_private *priv = usb_get_serial_port_data(port);
640 unsigned long flags;
641
642 /* writing is potentially harmful, lock must be taken */
643 mutex_lock(&port->serial->disc_mutex);
644 if (port->serial->disconnected) {
645 mutex_unlock(&port->serial->disc_mutex);
646 return;
647 }
648 spin_lock_irqsave(&priv->lock, flags);
649 kfifo_reset_out(&priv->write_fifo);
650 spin_unlock_irqrestore(&priv->lock, flags);
651
652 dbg("%s - stopping urbs", __func__);
653 usb_kill_urb(port->interrupt_in_urb);
654 usb_kill_urb(port->interrupt_out_urb);
655
656 if (stats)
657 dev_info(&port->dev, "Statistics: %d Bytes In | %d Bytes Out | %d Commands Issued\n",
658 priv->bytes_in, priv->bytes_out, priv->cmd_count);
659 mutex_unlock(&port->serial->disc_mutex);
660} /* cypress_close */
661
662
663static int cypress_write(struct tty_struct *tty, struct usb_serial_port *port,
664 const unsigned char *buf, int count)
665{
666 struct cypress_private *priv = usb_get_serial_port_data(port);
667
668 dbg("%s - port %d, %d bytes", __func__, port->number, count);
669
670 /* line control commands, which need to be executed immediately,
671 are not put into the buffer for obvious reasons.
672 */
673 if (priv->cmd_ctrl) {
674 count = 0;
675 goto finish;
676 }
677
678 if (!count)
679 return count;
680
681 count = kfifo_in_locked(&priv->write_fifo, buf, count, &priv->lock);
682
683finish:
684 cypress_send(port);
685
686 return count;
687} /* cypress_write */
688
689
690static void cypress_send(struct usb_serial_port *port)
691{
692 int count = 0, result, offset, actual_size;
693 struct cypress_private *priv = usb_get_serial_port_data(port);
694 unsigned long flags;
695
696 if (!priv->comm_is_ok)
697 return;
698
699 dbg("%s - interrupt out size is %d", __func__,
700 port->interrupt_out_size);
701
702 spin_lock_irqsave(&priv->lock, flags);
703 if (priv->write_urb_in_use) {
704 dbg("%s - can't write, urb in use", __func__);
705 spin_unlock_irqrestore(&priv->lock, flags);
706 return;
707 }
708 spin_unlock_irqrestore(&priv->lock, flags);
709
710 /* clear buffer */
711 memset(port->interrupt_out_urb->transfer_buffer, 0,
712 port->interrupt_out_size);
713
714 spin_lock_irqsave(&priv->lock, flags);
715 switch (priv->pkt_fmt) {
716 default:
717 case packet_format_1:
718 /* this is for the CY7C64013... */
719 offset = 2;
720 port->interrupt_out_buffer[0] = priv->line_control;
721 break;
722 case packet_format_2:
723 /* this is for the CY7C63743... */
724 offset = 1;
725 port->interrupt_out_buffer[0] = priv->line_control;
726 break;
727 }
728
729 if (priv->line_control & CONTROL_RESET)
730 priv->line_control &= ~CONTROL_RESET;
731
732 if (priv->cmd_ctrl) {
733 priv->cmd_count++;
734 dbg("%s - line control command being issued", __func__);
735 spin_unlock_irqrestore(&priv->lock, flags);
736 goto send;
737 } else
738 spin_unlock_irqrestore(&priv->lock, flags);
739
740 count = kfifo_out_locked(&priv->write_fifo,
741 &port->interrupt_out_buffer[offset],
742 port->interrupt_out_size - offset,
743 &priv->lock);
744 if (count == 0)
745 return;
746
747 switch (priv->pkt_fmt) {
748 default:
749 case packet_format_1:
750 port->interrupt_out_buffer[1] = count;
751 break;
752 case packet_format_2:
753 port->interrupt_out_buffer[0] |= count;
754 }
755
756 dbg("%s - count is %d", __func__, count);
757
758send:
759 spin_lock_irqsave(&priv->lock, flags);
760 priv->write_urb_in_use = 1;
761 spin_unlock_irqrestore(&priv->lock, flags);
762
763 if (priv->cmd_ctrl)
764 actual_size = 1;
765 else
766 actual_size = count +
767 (priv->pkt_fmt == packet_format_1 ? 2 : 1);
768
769 usb_serial_debug_data(debug, &port->dev, __func__,
770 port->interrupt_out_size,
771 port->interrupt_out_urb->transfer_buffer);
772
773 usb_fill_int_urb(port->interrupt_out_urb, port->serial->dev,
774 usb_sndintpipe(port->serial->dev, port->interrupt_out_endpointAddress),
775 port->interrupt_out_buffer, port->interrupt_out_size,
776 cypress_write_int_callback, port, priv->write_urb_interval);
777 result = usb_submit_urb(port->interrupt_out_urb, GFP_ATOMIC);
778 if (result) {
779 dev_err_console(port,
780 "%s - failed submitting write urb, error %d\n",
781 __func__, result);
782 priv->write_urb_in_use = 0;
783 cypress_set_dead(port);
784 }
785
786 spin_lock_irqsave(&priv->lock, flags);
787 if (priv->cmd_ctrl)
788 priv->cmd_ctrl = 0;
789
790 /* do not count the line control and size bytes */
791 priv->bytes_out += count;
792 spin_unlock_irqrestore(&priv->lock, flags);
793
794 usb_serial_port_softint(port);
795} /* cypress_send */
796
797
798/* returns how much space is available in the soft buffer */
799static int cypress_write_room(struct tty_struct *tty)
800{
801 struct usb_serial_port *port = tty->driver_data;
802 struct cypress_private *priv = usb_get_serial_port_data(port);
803 int room = 0;
804 unsigned long flags;
805
806 spin_lock_irqsave(&priv->lock, flags);
807 room = kfifo_avail(&priv->write_fifo);
808 spin_unlock_irqrestore(&priv->lock, flags);
809
810 dbg("%s - returns %d", __func__, room);
811 return room;
812}
813
814
815static int cypress_tiocmget(struct tty_struct *tty)
816{
817 struct usb_serial_port *port = tty->driver_data;
818 struct cypress_private *priv = usb_get_serial_port_data(port);
819 __u8 status, control;
820 unsigned int result = 0;
821 unsigned long flags;
822
823 spin_lock_irqsave(&priv->lock, flags);
824 control = priv->line_control;
825 status = priv->current_status;
826 spin_unlock_irqrestore(&priv->lock, flags);
827
828 result = ((control & CONTROL_DTR) ? TIOCM_DTR : 0)
829 | ((control & CONTROL_RTS) ? TIOCM_RTS : 0)
830 | ((status & UART_CTS) ? TIOCM_CTS : 0)
831 | ((status & UART_DSR) ? TIOCM_DSR : 0)
832 | ((status & UART_RI) ? TIOCM_RI : 0)
833 | ((status & UART_CD) ? TIOCM_CD : 0);
834
835 dbg("%s - result = %x", __func__, result);
836
837 return result;
838}
839
840
841static int cypress_tiocmset(struct tty_struct *tty,
842 unsigned int set, unsigned int clear)
843{
844 struct usb_serial_port *port = tty->driver_data;
845 struct cypress_private *priv = usb_get_serial_port_data(port);
846 unsigned long flags;
847
848 spin_lock_irqsave(&priv->lock, flags);
849 if (set & TIOCM_RTS)
850 priv->line_control |= CONTROL_RTS;
851 if (set & TIOCM_DTR)
852 priv->line_control |= CONTROL_DTR;
853 if (clear & TIOCM_RTS)
854 priv->line_control &= ~CONTROL_RTS;
855 if (clear & TIOCM_DTR)
856 priv->line_control &= ~CONTROL_DTR;
857 priv->cmd_ctrl = 1;
858 spin_unlock_irqrestore(&priv->lock, flags);
859
860 return cypress_write(tty, port, NULL, 0);
861}
862
863
864static int cypress_ioctl(struct tty_struct *tty,
865 unsigned int cmd, unsigned long arg)
866{
867 struct usb_serial_port *port = tty->driver_data;
868 struct cypress_private *priv = usb_get_serial_port_data(port);
869
870 dbg("%s - port %d, cmd 0x%.4x", __func__, port->number, cmd);
871
872 switch (cmd) {
873 /* This code comes from drivers/char/serial.c and ftdi_sio.c */
874 case TIOCMIWAIT:
875 while (priv != NULL) {
876 interruptible_sleep_on(&priv->delta_msr_wait);
877 /* see if a signal did it */
878 if (signal_pending(current))
879 return -ERESTARTSYS;
880 else {
881 char diff = priv->diff_status;
882 if (diff == 0)
883 return -EIO; /* no change => error */
884
885 /* consume all events */
886 priv->diff_status = 0;
887
888 /* return 0 if caller wanted to know about
889 these bits */
890 if (((arg & TIOCM_RNG) && (diff & UART_RI)) ||
891 ((arg & TIOCM_DSR) && (diff & UART_DSR)) ||
892 ((arg & TIOCM_CD) && (diff & UART_CD)) ||
893 ((arg & TIOCM_CTS) && (diff & UART_CTS)))
894 return 0;
895 /* otherwise caller can't care less about what
896 * happened, and so we continue to wait for
897 * more events.
898 */
899 }
900 }
901 return 0;
902 default:
903 break;
904 }
905 dbg("%s - arg not supported - it was 0x%04x - check include/asm/ioctls.h", __func__, cmd);
906 return -ENOIOCTLCMD;
907} /* cypress_ioctl */
908
909
910static void cypress_set_termios(struct tty_struct *tty,
911 struct usb_serial_port *port, struct ktermios *old_termios)
912{
913 struct cypress_private *priv = usb_get_serial_port_data(port);
914 int data_bits, stop_bits, parity_type, parity_enable;
915 unsigned cflag, iflag;
916 unsigned long flags;
917 __u8 oldlines;
918 int linechange = 0;
919
920 spin_lock_irqsave(&priv->lock, flags);
921 /* We can't clean this one up as we don't know the device type
922 early enough */
923 if (!priv->termios_initialized) {
924 if (priv->chiptype == CT_EARTHMATE) {
925 *(tty->termios) = tty_std_termios;
926 tty->termios->c_cflag = B4800 | CS8 | CREAD | HUPCL |
927 CLOCAL;
928 tty->termios->c_ispeed = 4800;
929 tty->termios->c_ospeed = 4800;
930 } else if (priv->chiptype == CT_CYPHIDCOM) {
931 *(tty->termios) = tty_std_termios;
932 tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL |
933 CLOCAL;
934 tty->termios->c_ispeed = 9600;
935 tty->termios->c_ospeed = 9600;
936 } else if (priv->chiptype == CT_CA42V2) {
937 *(tty->termios) = tty_std_termios;
938 tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL |
939 CLOCAL;
940 tty->termios->c_ispeed = 9600;
941 tty->termios->c_ospeed = 9600;
942 }
943 priv->termios_initialized = 1;
944 }
945 spin_unlock_irqrestore(&priv->lock, flags);
946
947 /* Unsupported features need clearing */
948 tty->termios->c_cflag &= ~(CMSPAR|CRTSCTS);
949
950 cflag = tty->termios->c_cflag;
951 iflag = tty->termios->c_iflag;
952
953 /* check if there are new settings */
954 if (old_termios) {
955 spin_lock_irqsave(&priv->lock, flags);
956 priv->tmp_termios = *(tty->termios);
957 spin_unlock_irqrestore(&priv->lock, flags);
958 }
959
960 /* set number of data bits, parity, stop bits */
961 /* when parity is disabled the parity type bit is ignored */
962
963 /* 1 means 2 stop bits, 0 means 1 stop bit */
964 stop_bits = cflag & CSTOPB ? 1 : 0;
965
966 if (cflag & PARENB) {
967 parity_enable = 1;
968 /* 1 means odd parity, 0 means even parity */
969 parity_type = cflag & PARODD ? 1 : 0;
970 } else
971 parity_enable = parity_type = 0;
972
973 switch (cflag & CSIZE) {
974 case CS5:
975 data_bits = 0;
976 break;
977 case CS6:
978 data_bits = 1;
979 break;
980 case CS7:
981 data_bits = 2;
982 break;
983 case CS8:
984 data_bits = 3;
985 break;
986 default:
987 dev_err(&port->dev, "%s - CSIZE was set, but not CS5-CS8\n",
988 __func__);
989 data_bits = 3;
990 }
991 spin_lock_irqsave(&priv->lock, flags);
992 oldlines = priv->line_control;
993 if ((cflag & CBAUD) == B0) {
994 /* drop dtr and rts */
995 dbg("%s - dropping the lines, baud rate 0bps", __func__);
996 priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
997 } else
998 priv->line_control = (CONTROL_DTR | CONTROL_RTS);
999 spin_unlock_irqrestore(&priv->lock, flags);
1000
1001 dbg("%s - sending %d stop_bits, %d parity_enable, %d parity_type, "
1002 "%d data_bits (+5)", __func__, stop_bits,
1003 parity_enable, parity_type, data_bits);
1004
1005 cypress_serial_control(tty, port, tty_get_baud_rate(tty),
1006 data_bits, stop_bits,
1007 parity_enable, parity_type,
1008 0, CYPRESS_SET_CONFIG);
1009
1010 /* we perform a CYPRESS_GET_CONFIG so that the current settings are
1011 * filled into the private structure this should confirm that all is
1012 * working if it returns what we just set */
1013 cypress_serial_control(tty, port, 0, 0, 0, 0, 0, 0, CYPRESS_GET_CONFIG);
1014
1015 /* Here we can define custom tty settings for devices; the main tty
1016 * termios flag base comes from empeg.c */
1017
1018 spin_lock_irqsave(&priv->lock, flags);
1019 if (priv->chiptype == CT_EARTHMATE && priv->baud_rate == 4800) {
1020 dbg("Using custom termios settings for a baud rate of "
1021 "4800bps.");
1022 /* define custom termios settings for NMEA protocol */
1023
1024 tty->termios->c_iflag /* input modes - */
1025 &= ~(IGNBRK /* disable ignore break */
1026 | BRKINT /* disable break causes interrupt */
1027 | PARMRK /* disable mark parity errors */
1028 | ISTRIP /* disable clear high bit of input char */
1029 | INLCR /* disable translate NL to CR */
1030 | IGNCR /* disable ignore CR */
1031 | ICRNL /* disable translate CR to NL */
1032 | IXON); /* disable enable XON/XOFF flow control */
1033
1034 tty->termios->c_oflag /* output modes */
1035 &= ~OPOST; /* disable postprocess output char */
1036
1037 tty->termios->c_lflag /* line discipline modes */
1038 &= ~(ECHO /* disable echo input characters */
1039 | ECHONL /* disable echo new line */
1040 | ICANON /* disable erase, kill, werase, and rprnt
1041 special characters */
1042 | ISIG /* disable interrupt, quit, and suspend
1043 special characters */
1044 | IEXTEN); /* disable non-POSIX special characters */
1045 } /* CT_CYPHIDCOM: Application should handle this for device */
1046
1047 linechange = (priv->line_control != oldlines);
1048 spin_unlock_irqrestore(&priv->lock, flags);
1049
1050 /* if necessary, set lines */
1051 if (linechange) {
1052 priv->cmd_ctrl = 1;
1053 cypress_write(tty, port, NULL, 0);
1054 }
1055} /* cypress_set_termios */
1056
1057
1058/* returns amount of data still left in soft buffer */
1059static int cypress_chars_in_buffer(struct tty_struct *tty)
1060{
1061 struct usb_serial_port *port = tty->driver_data;
1062 struct cypress_private *priv = usb_get_serial_port_data(port);
1063 int chars = 0;
1064 unsigned long flags;
1065
1066 spin_lock_irqsave(&priv->lock, flags);
1067 chars = kfifo_len(&priv->write_fifo);
1068 spin_unlock_irqrestore(&priv->lock, flags);
1069
1070 dbg("%s - returns %d", __func__, chars);
1071 return chars;
1072}
1073
1074
1075static void cypress_throttle(struct tty_struct *tty)
1076{
1077 struct usb_serial_port *port = tty->driver_data;
1078 struct cypress_private *priv = usb_get_serial_port_data(port);
1079
1080 spin_lock_irq(&priv->lock);
1081 priv->rx_flags = THROTTLED;
1082 spin_unlock_irq(&priv->lock);
1083}
1084
1085
1086static void cypress_unthrottle(struct tty_struct *tty)
1087{
1088 struct usb_serial_port *port = tty->driver_data;
1089 struct cypress_private *priv = usb_get_serial_port_data(port);
1090 int actually_throttled, result;
1091
1092 spin_lock_irq(&priv->lock);
1093 actually_throttled = priv->rx_flags & ACTUALLY_THROTTLED;
1094 priv->rx_flags = 0;
1095 spin_unlock_irq(&priv->lock);
1096
1097 if (!priv->comm_is_ok)
1098 return;
1099
1100 if (actually_throttled) {
1101 result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
1102 if (result) {
1103 dev_err(&port->dev, "%s - failed submitting read urb, "
1104 "error %d\n", __func__, result);
1105 cypress_set_dead(port);
1106 }
1107 }
1108}
1109
1110
1111static void cypress_read_int_callback(struct urb *urb)
1112{
1113 struct usb_serial_port *port = urb->context;
1114 struct cypress_private *priv = usb_get_serial_port_data(port);
1115 struct tty_struct *tty;
1116 unsigned char *data = urb->transfer_buffer;
1117 unsigned long flags;
1118 char tty_flag = TTY_NORMAL;
1119 int havedata = 0;
1120 int bytes = 0;
1121 int result;
1122 int i = 0;
1123 int status = urb->status;
1124
1125 switch (status) {
1126 case 0: /* success */
1127 break;
1128 case -ECONNRESET:
1129 case -ENOENT:
1130 case -ESHUTDOWN:
1131 /* precursor to disconnect so just go away */
1132 return;
1133 case -EPIPE:
1134 /* Can't call usb_clear_halt while in_interrupt */
1135 /* FALLS THROUGH */
1136 default:
1137 /* something ugly is going on... */
1138 dev_err(&urb->dev->dev,
1139 "%s - unexpected nonzero read status received: %d\n",
1140 __func__, status);
1141 cypress_set_dead(port);
1142 return;
1143 }
1144
1145 spin_lock_irqsave(&priv->lock, flags);
1146 if (priv->rx_flags & THROTTLED) {
1147 dbg("%s - now throttling", __func__);
1148 priv->rx_flags |= ACTUALLY_THROTTLED;
1149 spin_unlock_irqrestore(&priv->lock, flags);
1150 return;
1151 }
1152 spin_unlock_irqrestore(&priv->lock, flags);
1153
1154 tty = tty_port_tty_get(&port->port);
1155 if (!tty) {
1156 dbg("%s - bad tty pointer - exiting", __func__);
1157 return;
1158 }
1159
1160 spin_lock_irqsave(&priv->lock, flags);
1161 result = urb->actual_length;
1162 switch (priv->pkt_fmt) {
1163 default:
1164 case packet_format_1:
1165 /* This is for the CY7C64013... */
1166 priv->current_status = data[0] & 0xF8;
1167 bytes = data[1] + 2;
1168 i = 2;
1169 if (bytes > 2)
1170 havedata = 1;
1171 break;
1172 case packet_format_2:
1173 /* This is for the CY7C63743... */
1174 priv->current_status = data[0] & 0xF8;
1175 bytes = (data[0] & 0x07) + 1;
1176 i = 1;
1177 if (bytes > 1)
1178 havedata = 1;
1179 break;
1180 }
1181 spin_unlock_irqrestore(&priv->lock, flags);
1182 if (result < bytes) {
1183 dbg("%s - wrong packet size - received %d bytes but packet "
1184 "said %d bytes", __func__, result, bytes);
1185 goto continue_read;
1186 }
1187
1188 usb_serial_debug_data(debug, &port->dev, __func__,
1189 urb->actual_length, data);
1190
1191 spin_lock_irqsave(&priv->lock, flags);
1192 /* check to see if status has changed */
1193 if (priv->current_status != priv->prev_status) {
1194 priv->diff_status |= priv->current_status ^
1195 priv->prev_status;
1196 wake_up_interruptible(&priv->delta_msr_wait);
1197 priv->prev_status = priv->current_status;
1198 }
1199 spin_unlock_irqrestore(&priv->lock, flags);
1200
1201 /* hangup, as defined in acm.c... this might be a bad place for it
1202 * though */
1203 if (tty && !(tty->termios->c_cflag & CLOCAL) &&
1204 !(priv->current_status & UART_CD)) {
1205 dbg("%s - calling hangup", __func__);
1206 tty_hangup(tty);
1207 goto continue_read;
1208 }
1209
1210 /* There is one error bit... I'm assuming it is a parity error
1211 * indicator as the generic firmware will set this bit to 1 if a
1212 * parity error occurs.
1213 * I can not find reference to any other error events. */
1214 spin_lock_irqsave(&priv->lock, flags);
1215 if (priv->current_status & CYP_ERROR) {
1216 spin_unlock_irqrestore(&priv->lock, flags);
1217 tty_flag = TTY_PARITY;
1218 dbg("%s - Parity Error detected", __func__);
1219 } else
1220 spin_unlock_irqrestore(&priv->lock, flags);
1221
1222 /* process read if there is data other than line status */
1223 if (tty && bytes > i) {
1224 tty_insert_flip_string_fixed_flag(tty, data + i,
1225 tty_flag, bytes - i);
1226 tty_flip_buffer_push(tty);
1227 }
1228
1229 spin_lock_irqsave(&priv->lock, flags);
1230 /* control and status byte(s) are also counted */
1231 priv->bytes_in += bytes;
1232 spin_unlock_irqrestore(&priv->lock, flags);
1233
1234continue_read:
1235 tty_kref_put(tty);
1236
1237 /* Continue trying to always read */
1238
1239 if (priv->comm_is_ok) {
1240 usb_fill_int_urb(port->interrupt_in_urb, port->serial->dev,
1241 usb_rcvintpipe(port->serial->dev,
1242 port->interrupt_in_endpointAddress),
1243 port->interrupt_in_urb->transfer_buffer,
1244 port->interrupt_in_urb->transfer_buffer_length,
1245 cypress_read_int_callback, port,
1246 priv->read_urb_interval);
1247 result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
1248 if (result && result != -EPERM) {
1249 dev_err(&urb->dev->dev, "%s - failed resubmitting "
1250 "read urb, error %d\n", __func__,
1251 result);
1252 cypress_set_dead(port);
1253 }
1254 }
1255} /* cypress_read_int_callback */
1256
1257
1258static void cypress_write_int_callback(struct urb *urb)
1259{
1260 struct usb_serial_port *port = urb->context;
1261 struct cypress_private *priv = usb_get_serial_port_data(port);
1262 int result;
1263 int status = urb->status;
1264
1265 switch (status) {
1266 case 0:
1267 /* success */
1268 break;
1269 case -ECONNRESET:
1270 case -ENOENT:
1271 case -ESHUTDOWN:
1272 /* this urb is terminated, clean up */
1273 dbg("%s - urb shutting down with status: %d",
1274 __func__, status);
1275 priv->write_urb_in_use = 0;
1276 return;
1277 case -EPIPE: /* no break needed; clear halt and resubmit */
1278 if (!priv->comm_is_ok)
1279 break;
1280 usb_clear_halt(port->serial->dev, 0x02);
1281 /* error in the urb, so we have to resubmit it */
1282 dbg("%s - nonzero write bulk status received: %d",
1283 __func__, status);
1284 port->interrupt_out_urb->transfer_buffer_length = 1;
1285 result = usb_submit_urb(port->interrupt_out_urb, GFP_ATOMIC);
1286 if (!result)
1287 return;
1288 dev_err(&urb->dev->dev,
1289 "%s - failed resubmitting write urb, error %d\n",
1290 __func__, result);
1291 cypress_set_dead(port);
1292 break;
1293 default:
1294 dev_err(&urb->dev->dev,
1295 "%s - unexpected nonzero write status received: %d\n",
1296 __func__, status);
1297 cypress_set_dead(port);
1298 break;
1299 }
1300 priv->write_urb_in_use = 0;
1301
1302 /* send any buffered data */
1303 cypress_send(port);
1304}
1305
1306module_usb_serial_driver(serial_drivers, id_table_combined);
1307
1308MODULE_AUTHOR(DRIVER_AUTHOR);
1309MODULE_DESCRIPTION(DRIVER_DESC);
1310MODULE_VERSION(DRIVER_VERSION);
1311MODULE_LICENSE("GPL");
1312
1313module_param(debug, bool, S_IRUGO | S_IWUSR);
1314MODULE_PARM_DESC(debug, "Debug enabled or not");
1315module_param(stats, bool, S_IRUGO | S_IWUSR);
1316MODULE_PARM_DESC(stats, "Enable statistics or not");
1317module_param(interval, int, S_IRUGO | S_IWUSR);
1318MODULE_PARM_DESC(interval, "Overrides interrupt interval");
1319module_param(unstable_bauds, bool, S_IRUGO | S_IWUSR);
1320MODULE_PARM_DESC(unstable_bauds, "Allow unstable baud rates");