Linux Audio

Check our new training course

Loading...
v6.8
  1// SPDX-License-Identifier: GPL-1.0+
  2/*
  3 * Renesas USB driver
  4 *
  5 * Copyright (C) 2011 Renesas Solutions Corp.
  6 * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
 
 
 
 
 
 
 
 
 
 
  7 */
  8#include <linux/delay.h>
  9#include <linux/slab.h>
 10#include "common.h"
 11#include "pipe.h"
 12
 13/*
 14 *		macros
 15 */
 16#define usbhsp_addr_offset(p)	((usbhs_pipe_number(p) - 1) * 2)
 17
 18#define usbhsp_flags_set(p, f)	((p)->flags |=  USBHS_PIPE_FLAGS_##f)
 19#define usbhsp_flags_clr(p, f)	((p)->flags &= ~USBHS_PIPE_FLAGS_##f)
 20#define usbhsp_flags_has(p, f)	((p)->flags &   USBHS_PIPE_FLAGS_##f)
 21#define usbhsp_flags_init(p)	do {(p)->flags = 0; } while (0)
 22
 23/*
 24 * for debug
 25 */
 26static char *usbhsp_pipe_name[] = {
 27	[USB_ENDPOINT_XFER_CONTROL]	= "DCP",
 28	[USB_ENDPOINT_XFER_BULK]	= "BULK",
 29	[USB_ENDPOINT_XFER_INT]		= "INT",
 30	[USB_ENDPOINT_XFER_ISOC]	= "ISO",
 31};
 32
 33char *usbhs_pipe_name(struct usbhs_pipe *pipe)
 34{
 35	return usbhsp_pipe_name[usbhs_pipe_type(pipe)];
 36}
 37
 38static struct renesas_usbhs_driver_pipe_config
 39*usbhsp_get_pipe_config(struct usbhs_priv *priv, int pipe_num)
 40{
 41	struct renesas_usbhs_driver_pipe_config *pipe_configs =
 42					usbhs_get_dparam(priv, pipe_configs);
 43
 44	return &pipe_configs[pipe_num];
 45}
 46
 47/*
 48 *		DCPCTR/PIPEnCTR functions
 49 */
 50static void usbhsp_pipectrl_set(struct usbhs_pipe *pipe, u16 mask, u16 val)
 51{
 52	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
 53	int offset = usbhsp_addr_offset(pipe);
 54
 55	if (usbhs_pipe_is_dcp(pipe))
 56		usbhs_bset(priv, DCPCTR, mask, val);
 57	else
 58		usbhs_bset(priv, PIPEnCTR + offset, mask, val);
 59}
 60
 61static u16 usbhsp_pipectrl_get(struct usbhs_pipe *pipe)
 62{
 63	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
 64	int offset = usbhsp_addr_offset(pipe);
 65
 66	if (usbhs_pipe_is_dcp(pipe))
 67		return usbhs_read(priv, DCPCTR);
 68	else
 69		return usbhs_read(priv, PIPEnCTR + offset);
 70}
 71
 72/*
 73 *		DCP/PIPE functions
 74 */
 75static void __usbhsp_pipe_xxx_set(struct usbhs_pipe *pipe,
 76				  u16 dcp_reg, u16 pipe_reg,
 77				  u16 mask, u16 val)
 78{
 79	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
 80
 81	if (usbhs_pipe_is_dcp(pipe))
 82		usbhs_bset(priv, dcp_reg, mask, val);
 83	else
 84		usbhs_bset(priv, pipe_reg, mask, val);
 85}
 86
 87static u16 __usbhsp_pipe_xxx_get(struct usbhs_pipe *pipe,
 88				 u16 dcp_reg, u16 pipe_reg)
 89{
 90	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
 91
 92	if (usbhs_pipe_is_dcp(pipe))
 93		return usbhs_read(priv, dcp_reg);
 94	else
 95		return usbhs_read(priv, pipe_reg);
 96}
 97
 98/*
 99 *		DCPCFG/PIPECFG functions
100 */
101static void usbhsp_pipe_cfg_set(struct usbhs_pipe *pipe, u16 mask, u16 val)
102{
103	__usbhsp_pipe_xxx_set(pipe, DCPCFG, PIPECFG, mask, val);
104}
105
106static u16 usbhsp_pipe_cfg_get(struct usbhs_pipe *pipe)
107{
108	return __usbhsp_pipe_xxx_get(pipe, DCPCFG, PIPECFG);
109}
110
111/*
112 *		PIPEnTRN/PIPEnTRE functions
113 */
114static void usbhsp_pipe_trn_set(struct usbhs_pipe *pipe, u16 mask, u16 val)
115{
116	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
117	struct device *dev = usbhs_priv_to_dev(priv);
118	int num = usbhs_pipe_number(pipe);
119	u16 reg;
120
121	/*
122	 * It is impossible to calculate address,
123	 * since PIPEnTRN addresses were mapped randomly.
124	 */
125#define CASE_PIPExTRN(a)		\
126	case 0x ## a:			\
127		reg = PIPE ## a ## TRN;	\
128		break;
129
130	switch (num) {
131	CASE_PIPExTRN(1);
132	CASE_PIPExTRN(2);
133	CASE_PIPExTRN(3);
134	CASE_PIPExTRN(4);
135	CASE_PIPExTRN(5);
136	CASE_PIPExTRN(B);
137	CASE_PIPExTRN(C);
138	CASE_PIPExTRN(D);
139	CASE_PIPExTRN(E);
140	CASE_PIPExTRN(F);
141	CASE_PIPExTRN(9);
142	CASE_PIPExTRN(A);
143	default:
144		dev_err(dev, "unknown pipe (%d)\n", num);
145		return;
146	}
147	__usbhsp_pipe_xxx_set(pipe, 0, reg, mask, val);
148}
149
150static void usbhsp_pipe_tre_set(struct usbhs_pipe *pipe, u16 mask, u16 val)
151{
152	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
153	struct device *dev = usbhs_priv_to_dev(priv);
154	int num = usbhs_pipe_number(pipe);
155	u16 reg;
156
157	/*
158	 * It is impossible to calculate address,
159	 * since PIPEnTRE addresses were mapped randomly.
160	 */
161#define CASE_PIPExTRE(a)			\
162	case 0x ## a:				\
163		reg = PIPE ## a ## TRE;		\
164		break;
165
166	switch (num) {
167	CASE_PIPExTRE(1);
168	CASE_PIPExTRE(2);
169	CASE_PIPExTRE(3);
170	CASE_PIPExTRE(4);
171	CASE_PIPExTRE(5);
172	CASE_PIPExTRE(B);
173	CASE_PIPExTRE(C);
174	CASE_PIPExTRE(D);
175	CASE_PIPExTRE(E);
176	CASE_PIPExTRE(F);
177	CASE_PIPExTRE(9);
178	CASE_PIPExTRE(A);
179	default:
180		dev_err(dev, "unknown pipe (%d)\n", num);
181		return;
182	}
183
184	__usbhsp_pipe_xxx_set(pipe, 0, reg, mask, val);
185}
186
187/*
188 *		PIPEBUF
189 */
190static void usbhsp_pipe_buf_set(struct usbhs_pipe *pipe, u16 mask, u16 val)
191{
192	if (usbhs_pipe_is_dcp(pipe))
193		return;
194
195	__usbhsp_pipe_xxx_set(pipe, 0, PIPEBUF, mask, val);
196}
197
198/*
199 *		DCPMAXP/PIPEMAXP
200 */
201static void usbhsp_pipe_maxp_set(struct usbhs_pipe *pipe, u16 mask, u16 val)
202{
203	__usbhsp_pipe_xxx_set(pipe, DCPMAXP, PIPEMAXP, mask, val);
204}
205
206/*
207 *		pipe control functions
208 */
209static void usbhsp_pipe_select(struct usbhs_pipe *pipe)
210{
211	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
212
213	/*
214	 * On pipe, this is necessary before
215	 * accesses to below registers.
216	 *
217	 * PIPESEL	: usbhsp_pipe_select
218	 * PIPECFG	: usbhsp_pipe_cfg_xxx
219	 * PIPEBUF	: usbhsp_pipe_buf_xxx
220	 * PIPEMAXP	: usbhsp_pipe_maxp_xxx
221	 * PIPEPERI
222	 */
223
224	/*
225	 * if pipe is dcp, no pipe is selected.
226	 * it is no problem, because dcp have its register
227	 */
228	usbhs_write(priv, PIPESEL, 0xF & usbhs_pipe_number(pipe));
229}
230
231static int usbhsp_pipe_barrier(struct usbhs_pipe *pipe)
232{
233	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
234	int timeout = 1024;
235	u16 mask = usbhs_mod_is_host(priv) ? (CSSTS | PID_MASK) : PID_MASK;
236
237	/*
238	 * make sure....
239	 *
240	 * Modify these bits when CSSTS = 0, PID = NAK, and no pipe number is
241	 * specified by the CURPIPE bits.
242	 * When changing the setting of this bit after changing
243	 * the PID bits for the selected pipe from BUF to NAK,
244	 * check that CSSTS = 0 and PBUSY = 0.
245	 */
246
247	/*
248	 * CURPIPE bit = 0
249	 *
250	 * see also
251	 *  "Operation"
252	 *  - "Pipe Control"
253	 *   - "Pipe Control Registers Switching Procedure"
254	 */
255	usbhs_write(priv, CFIFOSEL, 0);
256	usbhs_pipe_disable(pipe);
257
258	do {
259		if (!(usbhsp_pipectrl_get(pipe) & mask))
 
 
260			return 0;
261
262		udelay(10);
263
264	} while (timeout--);
265
266	return -EBUSY;
267}
268
269int usbhs_pipe_is_accessible(struct usbhs_pipe *pipe)
270{
271	u16 val;
272
273	val = usbhsp_pipectrl_get(pipe);
274	if (val & BSTS)
275		return 0;
276
277	return -EBUSY;
278}
279
280bool usbhs_pipe_contains_transmittable_data(struct usbhs_pipe *pipe)
281{
282	u16 val;
283
284	/* Do not support for DCP pipe */
285	if (usbhs_pipe_is_dcp(pipe))
286		return false;
287
288	val = usbhsp_pipectrl_get(pipe);
289	if (val & INBUFM)
290		return true;
291
292	return false;
293}
294
295/*
296 *		PID ctrl
297 */
298static void __usbhsp_pid_try_nak_if_stall(struct usbhs_pipe *pipe)
299{
300	u16 pid = usbhsp_pipectrl_get(pipe);
301
302	pid &= PID_MASK;
303
304	/*
305	 * see
306	 * "Pipe n Control Register" - "PID"
307	 */
308	switch (pid) {
309	case PID_STALL11:
310		usbhsp_pipectrl_set(pipe, PID_MASK, PID_STALL10);
311		fallthrough;
312	case PID_STALL10:
313		usbhsp_pipectrl_set(pipe, PID_MASK, PID_NAK);
314	}
315}
316
317void usbhs_pipe_disable(struct usbhs_pipe *pipe)
318{
319	int timeout = 1024;
320	u16 val;
321
322	/* see "Pipe n Control Register" - "PID" */
323	__usbhsp_pid_try_nak_if_stall(pipe);
324
325	usbhsp_pipectrl_set(pipe, PID_MASK, PID_NAK);
326
327	do {
328		val  = usbhsp_pipectrl_get(pipe);
329		val &= PBUSY;
330		if (!val)
331			break;
332
333		udelay(10);
334	} while (timeout--);
335}
336
337void usbhs_pipe_enable(struct usbhs_pipe *pipe)
338{
339	/* see "Pipe n Control Register" - "PID" */
340	__usbhsp_pid_try_nak_if_stall(pipe);
341
342	usbhsp_pipectrl_set(pipe, PID_MASK, PID_BUF);
343}
344
345void usbhs_pipe_stall(struct usbhs_pipe *pipe)
346{
347	u16 pid = usbhsp_pipectrl_get(pipe);
348
349	pid &= PID_MASK;
350
351	/*
352	 * see
353	 * "Pipe n Control Register" - "PID"
354	 */
355	switch (pid) {
356	case PID_NAK:
357		usbhsp_pipectrl_set(pipe, PID_MASK, PID_STALL10);
358		break;
359	case PID_BUF:
360		usbhsp_pipectrl_set(pipe, PID_MASK, PID_STALL11);
361		break;
362	}
363}
364
365int usbhs_pipe_is_stall(struct usbhs_pipe *pipe)
366{
367	u16 pid = usbhsp_pipectrl_get(pipe) & PID_MASK;
368
369	return (int)(pid == PID_STALL10 || pid == PID_STALL11);
370}
371
372void usbhs_pipe_set_trans_count_if_bulk(struct usbhs_pipe *pipe, int len)
 
 
 
373{
374	if (!usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_BULK))
375		return;
376
377	/*
378	 * clear and disable transfer counter for IN/OUT pipe
379	 */
380	usbhsp_pipe_tre_set(pipe, TRCLR | TRENB, TRCLR);
381
382	/*
383	 * Only IN direction bulk pipe can use transfer count.
384	 * Without using this function,
385	 * received data will break if it was large data size.
386	 * see PIPEnTRN/PIPEnTRE for detail
387	 */
388	if (usbhs_pipe_is_dir_in(pipe)) {
389		int maxp = usbhs_pipe_get_maxpacket(pipe);
 
390
391		usbhsp_pipe_trn_set(pipe, 0xffff, DIV_ROUND_UP(len, maxp));
392		usbhsp_pipe_tre_set(pipe, TRENB, TRENB); /* enable */
393	}
394}
395
396
397/*
398 *		pipe setup
399 */
400static int usbhsp_setup_pipecfg(struct usbhs_pipe *pipe, int is_host,
401				int dir_in, u16 *pipecfg)
402{
403	u16 type = 0;
404	u16 bfre = 0;
405	u16 dblb = 0;
406	u16 cntmd = 0;
407	u16 dir = 0;
408	u16 epnum = 0;
409	u16 shtnak = 0;
410	static const u16 type_array[] = {
411		[USB_ENDPOINT_XFER_BULK] = TYPE_BULK,
412		[USB_ENDPOINT_XFER_INT]  = TYPE_INT,
413		[USB_ENDPOINT_XFER_ISOC] = TYPE_ISO,
414	};
 
415
416	if (usbhs_pipe_is_dcp(pipe))
417		return -EINVAL;
418
419	/*
420	 * PIPECFG
421	 *
422	 * see
423	 *  - "Register Descriptions" - "PIPECFG" register
424	 *  - "Features"  - "Pipe configuration"
425	 *  - "Operation" - "Pipe Control"
426	 */
427
428	/* TYPE */
429	type = type_array[usbhs_pipe_type(pipe)];
430
431	/* BFRE */
432	if (usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_ISOC) ||
433	    usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_BULK))
434		bfre = 0; /* FIXME */
435
436	/* DBLB: see usbhs_pipe_config_update() */
 
 
 
437
438	/* CNTMD */
439	if (usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_BULK))
440		cntmd = 0; /* FIXME */
441
442	/* DIR */
443	if (dir_in)
444		usbhsp_flags_set(pipe, IS_DIR_HOST);
445
446	if (!!is_host ^ !!dir_in)
447		dir |= DIR_OUT;
448
449	if (!dir)
450		usbhsp_flags_set(pipe, IS_DIR_IN);
451
452	/* SHTNAK */
453	if (usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_BULK) &&
454	    !dir)
455		shtnak = SHTNAK;
456
457	/* EPNUM */
458	epnum = 0; /* see usbhs_pipe_config_update() */
459	*pipecfg = type		|
460		   bfre		|
461		   dblb		|
462		   cntmd	|
463		   dir		|
464		   shtnak	|
465		   epnum;
466	return 0;
467}
468
469static u16 usbhsp_setup_pipebuff(struct usbhs_pipe *pipe)
470{
471	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
 
472	struct device *dev = usbhs_priv_to_dev(priv);
473	int pipe_num = usbhs_pipe_number(pipe);
 
474	u16 buff_size;
475	u16 bufnmb;
476	u16 bufnmb_cnt;
477	struct renesas_usbhs_driver_pipe_config *pipe_config =
478					usbhsp_get_pipe_config(priv, pipe_num);
479
480	/*
481	 * PIPEBUF
482	 *
483	 * see
484	 *  - "Register Descriptions" - "PIPEBUF" register
485	 *  - "Features"  - "Pipe configuration"
486	 *  - "Operation" - "FIFO Buffer Memory"
487	 *  - "Operation" - "Pipe Control"
 
 
 
 
 
 
 
 
 
 
 
 
 
488	 */
489	buff_size = pipe_config->bufsize;
490	bufnmb = pipe_config->bufnum;
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
491
492	/* change buff_size to register value */
493	bufnmb_cnt = (buff_size / 64) - 1;
494
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
495	dev_dbg(dev, "pipe : %d : buff_size 0x%x: bufnmb 0x%x\n",
496		pipe_num, buff_size, bufnmb);
497
498	return	(0x1f & bufnmb_cnt)	<< 10 |
499		(0xff & bufnmb)		<<  0;
500}
501
502void usbhs_pipe_config_update(struct usbhs_pipe *pipe, u16 devsel,
503			      u16 epnum, u16 maxp)
504{
505	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
506	int pipe_num = usbhs_pipe_number(pipe);
507	struct renesas_usbhs_driver_pipe_config *pipe_config =
508					usbhsp_get_pipe_config(priv, pipe_num);
509	u16 dblb = pipe_config->double_buf ? DBLB : 0;
510
511	if (devsel > 0xA) {
 
512		struct device *dev = usbhs_priv_to_dev(priv);
513
514		dev_err(dev, "devsel error %d\n", devsel);
515
516		devsel = 0;
517	}
518
519	usbhsp_pipe_barrier(pipe);
520
521	pipe->maxp = maxp;
522
523	usbhsp_pipe_select(pipe);
524	usbhsp_pipe_maxp_set(pipe, 0xFFFF,
525			     (devsel << 12) |
526			     maxp);
527
528	if (!usbhs_pipe_is_dcp(pipe))
529		usbhsp_pipe_cfg_set(pipe,  0x000F | DBLB, epnum | dblb);
530}
531
532/*
533 *		pipe control
534 */
535int usbhs_pipe_get_maxpacket(struct usbhs_pipe *pipe)
536{
537	/*
538	 * see
539	 *	usbhs_pipe_config_update()
540	 *	usbhs_dcp_malloc()
541	 */
542	return pipe->maxp;
543}
544
545int usbhs_pipe_is_dir_in(struct usbhs_pipe *pipe)
546{
547	return usbhsp_flags_has(pipe, IS_DIR_IN);
548}
549
550int usbhs_pipe_is_dir_host(struct usbhs_pipe *pipe)
551{
552	return usbhsp_flags_has(pipe, IS_DIR_HOST);
553}
554
555int usbhs_pipe_is_running(struct usbhs_pipe *pipe)
556{
557	return usbhsp_flags_has(pipe, IS_RUNNING);
558}
559
560void usbhs_pipe_running(struct usbhs_pipe *pipe, int running)
561{
562	if (running)
563		usbhsp_flags_set(pipe, IS_RUNNING);
564	else
565		usbhsp_flags_clr(pipe, IS_RUNNING);
566}
567
568void usbhs_pipe_data_sequence(struct usbhs_pipe *pipe, int sequence)
569{
570	u16 mask = (SQCLR | SQSET);
571	u16 val;
572
573	/*
574	 * sequence
575	 *  0  : data0
576	 *  1  : data1
577	 *  -1 : no change
578	 */
579	switch (sequence) {
580	case 0:
581		val = SQCLR;
582		break;
583	case 1:
584		val = SQSET;
585		break;
586	default:
587		return;
588	}
589
590	usbhsp_pipectrl_set(pipe, mask, val);
591}
592
593static int usbhs_pipe_get_data_sequence(struct usbhs_pipe *pipe)
594{
595	return !!(usbhsp_pipectrl_get(pipe) & SQMON);
596}
597
598void usbhs_pipe_clear(struct usbhs_pipe *pipe)
599{
600	if (usbhs_pipe_is_dcp(pipe)) {
601		usbhs_fifo_clear_dcp(pipe);
602	} else {
603		usbhsp_pipectrl_set(pipe, ACLRM, ACLRM);
604		usbhsp_pipectrl_set(pipe, ACLRM, 0);
605	}
606}
607
608/* Should call usbhsp_pipe_select() before */
609void usbhs_pipe_clear_without_sequence(struct usbhs_pipe *pipe,
610				       int needs_bfre, int bfre_enable)
611{
612	int sequence;
613
614	usbhsp_pipe_select(pipe);
615	sequence = usbhs_pipe_get_data_sequence(pipe);
616	if (needs_bfre)
617		usbhsp_pipe_cfg_set(pipe, BFRE, bfre_enable ? BFRE : 0);
618	usbhs_pipe_clear(pipe);
619	usbhs_pipe_data_sequence(pipe, sequence);
620}
621
622void usbhs_pipe_config_change_bfre(struct usbhs_pipe *pipe, int enable)
623{
624	if (usbhs_pipe_is_dcp(pipe))
625		return;
626
627	usbhsp_pipe_select(pipe);
628	/* check if the driver needs to change the BFRE value */
629	if (!(enable ^ !!(usbhsp_pipe_cfg_get(pipe) & BFRE)))
630		return;
631
632	usbhs_pipe_clear_without_sequence(pipe, 1, enable);
633}
634
635static struct usbhs_pipe *usbhsp_get_pipe(struct usbhs_priv *priv, u32 type)
636{
637	struct usbhs_pipe *pos, *pipe;
638	int i;
639
640	/*
641	 * find target pipe
642	 */
643	pipe = NULL;
644	usbhs_for_each_pipe_with_dcp(pos, priv, i) {
645		if (!usbhs_pipe_type_is(pos, type))
646			continue;
647		if (usbhsp_flags_has(pos, IS_USED))
648			continue;
649
650		pipe = pos;
651		break;
652	}
653
654	if (!pipe)
655		return NULL;
656
657	/*
658	 * initialize pipe flags
659	 */
660	usbhsp_flags_init(pipe);
661	usbhsp_flags_set(pipe, IS_USED);
662
663	return pipe;
664}
665
666static void usbhsp_put_pipe(struct usbhs_pipe *pipe)
667{
668	usbhsp_flags_init(pipe);
669}
670
671void usbhs_pipe_init(struct usbhs_priv *priv,
672		     int (*dma_map_ctrl)(struct device *dma_dev,
673					 struct usbhs_pkt *pkt, int map))
674{
675	struct usbhs_pipe_info *info = usbhs_priv_to_pipeinfo(priv);
676	struct usbhs_pipe *pipe;
677	int i;
678
 
 
 
 
 
 
 
 
 
 
 
 
 
679	usbhs_for_each_pipe_with_dcp(pipe, priv, i) {
 
 
 
680		usbhsp_flags_init(pipe);
681		pipe->fifo = NULL;
682		pipe->mod_private = NULL;
683		INIT_LIST_HEAD(&pipe->list);
684
685		/* pipe force init */
686		usbhs_pipe_clear(pipe);
687	}
688
689	info->dma_map_ctrl = dma_map_ctrl;
690}
691
692struct usbhs_pipe *usbhs_pipe_malloc(struct usbhs_priv *priv,
693				     int endpoint_type,
694				     int dir_in)
695{
696	struct device *dev = usbhs_priv_to_dev(priv);
697	struct usbhs_pipe *pipe;
698	int is_host = usbhs_mod_is_host(priv);
699	int ret;
700	u16 pipecfg, pipebuf;
701
702	pipe = usbhsp_get_pipe(priv, endpoint_type);
703	if (!pipe) {
704		dev_err(dev, "can't get pipe (%s)\n",
705			usbhsp_pipe_name[endpoint_type]);
706		return NULL;
707	}
708
709	INIT_LIST_HEAD(&pipe->list);
710
711	usbhs_pipe_disable(pipe);
712
713	/* make sure pipe is not busy */
714	ret = usbhsp_pipe_barrier(pipe);
715	if (ret < 0) {
716		dev_err(dev, "pipe setup failed %d\n", usbhs_pipe_number(pipe));
717		return NULL;
718	}
719
720	if (usbhsp_setup_pipecfg(pipe, is_host, dir_in, &pipecfg)) {
721		dev_err(dev, "can't setup pipe\n");
722		return NULL;
723	}
724
725	pipebuf  = usbhsp_setup_pipebuff(pipe);
726
727	usbhsp_pipe_select(pipe);
728	usbhsp_pipe_cfg_set(pipe, 0xFFFF, pipecfg);
729	usbhsp_pipe_buf_set(pipe, 0xFFFF, pipebuf);
730	usbhs_pipe_clear(pipe);
731
732	usbhs_pipe_sequence_data0(pipe);
733
734	dev_dbg(dev, "enable pipe %d : %s (%s)\n",
735		usbhs_pipe_number(pipe),
736		usbhs_pipe_name(pipe),
737		usbhs_pipe_is_dir_in(pipe) ? "in" : "out");
738
739	/*
740	 * epnum / maxp are still not set to this pipe.
741	 * call usbhs_pipe_config_update() after this function !!
742	 */
743
744	return pipe;
745}
746
747void usbhs_pipe_free(struct usbhs_pipe *pipe)
748{
749	usbhsp_pipe_select(pipe);
750	usbhsp_pipe_cfg_set(pipe, 0xFFFF, 0);
751	usbhsp_put_pipe(pipe);
752}
753
754void usbhs_pipe_select_fifo(struct usbhs_pipe *pipe, struct usbhs_fifo *fifo)
755{
756	if (pipe->fifo)
757		pipe->fifo->pipe = NULL;
758
759	pipe->fifo = fifo;
760
761	if (fifo)
762		fifo->pipe = pipe;
763}
764
765
766/*
767 *		dcp control
768 */
769struct usbhs_pipe *usbhs_dcp_malloc(struct usbhs_priv *priv)
770{
771	struct usbhs_pipe *pipe;
772
773	pipe = usbhsp_get_pipe(priv, USB_ENDPOINT_XFER_CONTROL);
774	if (!pipe)
775		return NULL;
776
777	INIT_LIST_HEAD(&pipe->list);
778
779	/*
780	 * call usbhs_pipe_config_update() after this function !!
781	 */
782
783	return pipe;
784}
785
786void usbhs_dcp_control_transfer_done(struct usbhs_pipe *pipe)
787{
788	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
789
790	WARN_ON(!usbhs_pipe_is_dcp(pipe));
791
792	usbhs_pipe_enable(pipe);
793
794	if (!usbhs_mod_is_host(priv)) /* funconly */
795		usbhsp_pipectrl_set(pipe, CCPL, CCPL);
796}
797
798void usbhs_dcp_dir_for_host(struct usbhs_pipe *pipe, int dir_out)
799{
800	usbhsp_pipe_cfg_set(pipe, DIR_OUT,
801			    dir_out ? DIR_OUT : 0);
802}
803
804/*
805 *		pipe module function
806 */
807int usbhs_pipe_probe(struct usbhs_priv *priv)
808{
809	struct usbhs_pipe_info *info = usbhs_priv_to_pipeinfo(priv);
810	struct usbhs_pipe *pipe;
811	struct device *dev = usbhs_priv_to_dev(priv);
812	struct renesas_usbhs_driver_pipe_config *pipe_configs =
813					usbhs_get_dparam(priv, pipe_configs);
814	int pipe_size = usbhs_get_dparam(priv, pipe_size);
815	int i;
816
817	/* This driver expects 1st pipe is DCP */
818	if (pipe_configs[0].type != USB_ENDPOINT_XFER_CONTROL) {
819		dev_err(dev, "1st PIPE is not DCP\n");
820		return -EINVAL;
821	}
822
823	info->pipe = kcalloc(pipe_size, sizeof(struct usbhs_pipe),
824			     GFP_KERNEL);
825	if (!info->pipe)
826		return -ENOMEM;
 
827
828	info->size = pipe_size;
829
830	/*
831	 * init pipe
832	 */
833	usbhs_for_each_pipe_with_dcp(pipe, priv, i) {
834		pipe->priv = priv;
835
836		usbhs_pipe_type(pipe) =
837			pipe_configs[i].type & USB_ENDPOINT_XFERTYPE_MASK;
838
839		dev_dbg(dev, "pipe %x\t: %s\n",
840			i, usbhsp_pipe_name[pipe_configs[i].type]);
841	}
842
843	return 0;
844}
845
846void usbhs_pipe_remove(struct usbhs_priv *priv)
847{
848	struct usbhs_pipe_info *info = usbhs_priv_to_pipeinfo(priv);
849
850	kfree(info->pipe);
851}
v3.5.6
 
  1/*
  2 * Renesas USB driver
  3 *
  4 * Copyright (C) 2011 Renesas Solutions Corp.
  5 * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
  6 *
  7 * This program is distributed in the hope that it will be useful,
  8 * but WITHOUT ANY WARRANTY; without even the implied warranty of
  9 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 10 * GNU General Public License for more details.
 11 *
 12 * You should have received a copy of the GNU General Public License
 13 * along with this program; if not, write to the Free Software
 14 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
 15 *
 16 */
 17#include <linux/delay.h>
 18#include <linux/slab.h>
 19#include "./common.h"
 20#include "./pipe.h"
 21
 22/*
 23 *		macros
 24 */
 25#define usbhsp_addr_offset(p)	((usbhs_pipe_number(p) - 1) * 2)
 26
 27#define usbhsp_flags_set(p, f)	((p)->flags |=  USBHS_PIPE_FLAGS_##f)
 28#define usbhsp_flags_clr(p, f)	((p)->flags &= ~USBHS_PIPE_FLAGS_##f)
 29#define usbhsp_flags_has(p, f)	((p)->flags &   USBHS_PIPE_FLAGS_##f)
 30#define usbhsp_flags_init(p)	do {(p)->flags = 0; } while (0)
 31
 32/*
 33 * for debug
 34 */
 35static char *usbhsp_pipe_name[] = {
 36	[USB_ENDPOINT_XFER_CONTROL]	= "DCP",
 37	[USB_ENDPOINT_XFER_BULK]	= "BULK",
 38	[USB_ENDPOINT_XFER_INT]		= "INT",
 39	[USB_ENDPOINT_XFER_ISOC]	= "ISO",
 40};
 41
 42char *usbhs_pipe_name(struct usbhs_pipe *pipe)
 43{
 44	return usbhsp_pipe_name[usbhs_pipe_type(pipe)];
 45}
 46
 
 
 
 
 
 
 
 
 
 47/*
 48 *		DCPCTR/PIPEnCTR functions
 49 */
 50static void usbhsp_pipectrl_set(struct usbhs_pipe *pipe, u16 mask, u16 val)
 51{
 52	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
 53	int offset = usbhsp_addr_offset(pipe);
 54
 55	if (usbhs_pipe_is_dcp(pipe))
 56		usbhs_bset(priv, DCPCTR, mask, val);
 57	else
 58		usbhs_bset(priv, PIPEnCTR + offset, mask, val);
 59}
 60
 61static u16 usbhsp_pipectrl_get(struct usbhs_pipe *pipe)
 62{
 63	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
 64	int offset = usbhsp_addr_offset(pipe);
 65
 66	if (usbhs_pipe_is_dcp(pipe))
 67		return usbhs_read(priv, DCPCTR);
 68	else
 69		return usbhs_read(priv, PIPEnCTR + offset);
 70}
 71
 72/*
 73 *		DCP/PIPE functions
 74 */
 75static void __usbhsp_pipe_xxx_set(struct usbhs_pipe *pipe,
 76				  u16 dcp_reg, u16 pipe_reg,
 77				  u16 mask, u16 val)
 78{
 79	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
 80
 81	if (usbhs_pipe_is_dcp(pipe))
 82		usbhs_bset(priv, dcp_reg, mask, val);
 83	else
 84		usbhs_bset(priv, pipe_reg, mask, val);
 85}
 86
 
 
 
 
 
 
 
 
 
 
 
 87/*
 88 *		DCPCFG/PIPECFG functions
 89 */
 90static void usbhsp_pipe_cfg_set(struct usbhs_pipe *pipe, u16 mask, u16 val)
 91{
 92	__usbhsp_pipe_xxx_set(pipe, DCPCFG, PIPECFG, mask, val);
 93}
 94
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 95/*
 96 *		PIPEBUF
 97 */
 98static void usbhsp_pipe_buf_set(struct usbhs_pipe *pipe, u16 mask, u16 val)
 99{
100	if (usbhs_pipe_is_dcp(pipe))
101		return;
102
103	__usbhsp_pipe_xxx_set(pipe, 0, PIPEBUF, mask, val);
104}
105
106/*
107 *		DCPMAXP/PIPEMAXP
108 */
109static void usbhsp_pipe_maxp_set(struct usbhs_pipe *pipe, u16 mask, u16 val)
110{
111	__usbhsp_pipe_xxx_set(pipe, DCPMAXP, PIPEMAXP, mask, val);
112}
113
114/*
115 *		pipe control functions
116 */
117static void usbhsp_pipe_select(struct usbhs_pipe *pipe)
118{
119	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
120
121	/*
122	 * On pipe, this is necessary before
123	 * accesses to below registers.
124	 *
125	 * PIPESEL	: usbhsp_pipe_select
126	 * PIPECFG	: usbhsp_pipe_cfg_xxx
127	 * PIPEBUF	: usbhsp_pipe_buf_xxx
128	 * PIPEMAXP	: usbhsp_pipe_maxp_xxx
129	 * PIPEPERI
130	 */
131
132	/*
133	 * if pipe is dcp, no pipe is selected.
134	 * it is no problem, because dcp have its register
135	 */
136	usbhs_write(priv, PIPESEL, 0xF & usbhs_pipe_number(pipe));
137}
138
139static int usbhsp_pipe_barrier(struct usbhs_pipe *pipe)
140{
141	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
142	int timeout = 1024;
143	u16 val;
144
145	/*
146	 * make sure....
147	 *
148	 * Modify these bits when CSSTS = 0, PID = NAK, and no pipe number is
149	 * specified by the CURPIPE bits.
150	 * When changing the setting of this bit after changing
151	 * the PID bits for the selected pipe from BUF to NAK,
152	 * check that CSSTS = 0 and PBUSY = 0.
153	 */
154
155	/*
156	 * CURPIPE bit = 0
157	 *
158	 * see also
159	 *  "Operation"
160	 *  - "Pipe Control"
161	 *   - "Pipe Control Registers Switching Procedure"
162	 */
163	usbhs_write(priv, CFIFOSEL, 0);
164	usbhs_pipe_disable(pipe);
165
166	do {
167		val  = usbhsp_pipectrl_get(pipe);
168		val &= CSSTS | PID_MASK;
169		if (!val)
170			return 0;
171
172		udelay(10);
173
174	} while (timeout--);
175
176	return -EBUSY;
177}
178
179int usbhs_pipe_is_accessible(struct usbhs_pipe *pipe)
180{
181	u16 val;
182
183	val = usbhsp_pipectrl_get(pipe);
184	if (val & BSTS)
185		return 0;
186
187	return -EBUSY;
188}
189
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
190/*
191 *		PID ctrl
192 */
193static void __usbhsp_pid_try_nak_if_stall(struct usbhs_pipe *pipe)
194{
195	u16 pid = usbhsp_pipectrl_get(pipe);
196
197	pid &= PID_MASK;
198
199	/*
200	 * see
201	 * "Pipe n Control Register" - "PID"
202	 */
203	switch (pid) {
204	case PID_STALL11:
205		usbhsp_pipectrl_set(pipe, PID_MASK, PID_STALL10);
206		/* fall-through */
207	case PID_STALL10:
208		usbhsp_pipectrl_set(pipe, PID_MASK, PID_NAK);
209	}
210}
211
212void usbhs_pipe_disable(struct usbhs_pipe *pipe)
213{
214	int timeout = 1024;
215	u16 val;
216
217	/* see "Pipe n Control Register" - "PID" */
218	__usbhsp_pid_try_nak_if_stall(pipe);
219
220	usbhsp_pipectrl_set(pipe, PID_MASK, PID_NAK);
221
222	do {
223		val  = usbhsp_pipectrl_get(pipe);
224		val &= PBUSY;
225		if (!val)
226			break;
227
228		udelay(10);
229	} while (timeout--);
230}
231
232void usbhs_pipe_enable(struct usbhs_pipe *pipe)
233{
234	/* see "Pipe n Control Register" - "PID" */
235	__usbhsp_pid_try_nak_if_stall(pipe);
236
237	usbhsp_pipectrl_set(pipe, PID_MASK, PID_BUF);
238}
239
240void usbhs_pipe_stall(struct usbhs_pipe *pipe)
241{
242	u16 pid = usbhsp_pipectrl_get(pipe);
243
244	pid &= PID_MASK;
245
246	/*
247	 * see
248	 * "Pipe n Control Register" - "PID"
249	 */
250	switch (pid) {
251	case PID_NAK:
252		usbhsp_pipectrl_set(pipe, PID_MASK, PID_STALL10);
253		break;
254	case PID_BUF:
255		usbhsp_pipectrl_set(pipe, PID_MASK, PID_STALL11);
256		break;
257	}
258}
259
260int usbhs_pipe_is_stall(struct usbhs_pipe *pipe)
261{
262	u16 pid = usbhsp_pipectrl_get(pipe) & PID_MASK;
263
264	return (int)(pid == PID_STALL10 || pid == PID_STALL11);
265}
266
267/*
268 *		pipe setup
269 */
270static int usbhsp_possible_double_buffer(struct usbhs_pipe *pipe)
271{
 
 
 
 
 
 
 
 
272	/*
273	 * only ISO / BULK pipe can use double buffer
 
 
 
274	 */
275	if (usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_BULK) ||
276	    usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_ISOC))
277		return 1;
278
279	return 0;
 
 
280}
281
282static u16 usbhsp_setup_pipecfg(struct usbhs_pipe *pipe,
283				int is_host,
284				int dir_in)
 
 
 
285{
286	u16 type = 0;
287	u16 bfre = 0;
288	u16 dblb = 0;
289	u16 cntmd = 0;
290	u16 dir = 0;
291	u16 epnum = 0;
292	u16 shtnak = 0;
293	u16 type_array[] = {
294		[USB_ENDPOINT_XFER_BULK] = TYPE_BULK,
295		[USB_ENDPOINT_XFER_INT]  = TYPE_INT,
296		[USB_ENDPOINT_XFER_ISOC] = TYPE_ISO,
297	};
298	int is_double = usbhsp_possible_double_buffer(pipe);
299
300	if (usbhs_pipe_is_dcp(pipe))
301		return -EINVAL;
302
303	/*
304	 * PIPECFG
305	 *
306	 * see
307	 *  - "Register Descriptions" - "PIPECFG" register
308	 *  - "Features"  - "Pipe configuration"
309	 *  - "Operation" - "Pipe Control"
310	 */
311
312	/* TYPE */
313	type = type_array[usbhs_pipe_type(pipe)];
314
315	/* BFRE */
316	if (usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_ISOC) ||
317	    usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_BULK))
318		bfre = 0; /* FIXME */
319
320	/* DBLB */
321	if (usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_ISOC) ||
322	    usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_BULK))
323		dblb = (is_double) ? DBLB : 0;
324
325	/* CNTMD */
326	if (usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_BULK))
327		cntmd = 0; /* FIXME */
328
329	/* DIR */
330	if (dir_in)
331		usbhsp_flags_set(pipe, IS_DIR_HOST);
332
333	if (!!is_host ^ !!dir_in)
334		dir |= DIR_OUT;
335
336	if (!dir)
337		usbhsp_flags_set(pipe, IS_DIR_IN);
338
339	/* SHTNAK */
340	if (usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_BULK) &&
341	    !dir)
342		shtnak = SHTNAK;
343
344	/* EPNUM */
345	epnum = 0; /* see usbhs_pipe_config_update() */
346
347	return	type	|
348		bfre	|
349		dblb	|
350		cntmd	|
351		dir	|
352		shtnak	|
353		epnum;
354}
355
356static u16 usbhsp_setup_pipebuff(struct usbhs_pipe *pipe)
357{
358	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
359	struct usbhs_pipe_info *info = usbhs_priv_to_pipeinfo(priv);
360	struct device *dev = usbhs_priv_to_dev(priv);
361	int pipe_num = usbhs_pipe_number(pipe);
362	int is_double = usbhsp_possible_double_buffer(pipe);
363	u16 buff_size;
364	u16 bufnmb;
365	u16 bufnmb_cnt;
 
 
366
367	/*
368	 * PIPEBUF
369	 *
370	 * see
371	 *  - "Register Descriptions" - "PIPEBUF" register
372	 *  - "Features"  - "Pipe configuration"
373	 *  - "Operation" - "FIFO Buffer Memory"
374	 *  - "Operation" - "Pipe Control"
375	 *
376	 * ex) if pipe6 - pipe9 are USB_ENDPOINT_XFER_INT (SH7724)
377	 *
378	 * BUFNMB:	PIPE
379	 * 0:		pipe0 (DCP 256byte)
380	 * 1:		-
381	 * 2:		-
382	 * 3:		-
383	 * 4:		pipe6 (INT 64byte)
384	 * 5:		pipe7 (INT 64byte)
385	 * 6:		pipe8 (INT 64byte)
386	 * 7:		pipe9 (INT 64byte)
387	 * 8 - xx:	free (for BULK, ISOC)
388	 */
389
390	/*
391	 * FIXME
392	 *
393	 * it doesn't have good buffer allocator
394	 *
395	 * DCP : 256 byte
396	 * BULK: 512 byte
397	 * INT :  64 byte
398	 * ISOC: 512 byte
399	 */
400	if (usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_CONTROL))
401		buff_size = 256;
402	else if (usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_INT))
403		buff_size = 64;
404	else
405		buff_size = 512;
406
407	/* change buff_size to register value */
408	bufnmb_cnt = (buff_size / 64) - 1;
409
410	/* BUFNMB has been reserved for INT pipe
411	 * see above */
412	if (usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_INT)) {
413		bufnmb = pipe_num - 2;
414	} else {
415		bufnmb = info->bufnmb_last;
416		info->bufnmb_last += bufnmb_cnt + 1;
417
418		/*
419		 * double buffer
420		 */
421		if (is_double)
422			info->bufnmb_last += bufnmb_cnt + 1;
423	}
424
425	dev_dbg(dev, "pipe : %d : buff_size 0x%x: bufnmb 0x%x\n",
426		pipe_num, buff_size, bufnmb);
427
428	return	(0x1f & bufnmb_cnt)	<< 10 |
429		(0xff & bufnmb)		<<  0;
430}
431
432void usbhs_pipe_config_update(struct usbhs_pipe *pipe, u16 devsel,
433			      u16 epnum, u16 maxp)
434{
 
 
 
 
 
 
435	if (devsel > 0xA) {
436		struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
437		struct device *dev = usbhs_priv_to_dev(priv);
438
439		dev_err(dev, "devsel error %d\n", devsel);
440
441		devsel = 0;
442	}
443
444	usbhsp_pipe_barrier(pipe);
445
446	pipe->maxp = maxp;
447
448	usbhsp_pipe_select(pipe);
449	usbhsp_pipe_maxp_set(pipe, 0xFFFF,
450			     (devsel << 12) |
451			     maxp);
452
453	if (!usbhs_pipe_is_dcp(pipe))
454		usbhsp_pipe_cfg_set(pipe,  0x000F, epnum);
455}
456
457/*
458 *		pipe control
459 */
460int usbhs_pipe_get_maxpacket(struct usbhs_pipe *pipe)
461{
462	/*
463	 * see
464	 *	usbhs_pipe_config_update()
465	 *	usbhs_dcp_malloc()
466	 */
467	return pipe->maxp;
468}
469
470int usbhs_pipe_is_dir_in(struct usbhs_pipe *pipe)
471{
472	return usbhsp_flags_has(pipe, IS_DIR_IN);
473}
474
475int usbhs_pipe_is_dir_host(struct usbhs_pipe *pipe)
476{
477	return usbhsp_flags_has(pipe, IS_DIR_HOST);
478}
479
 
 
 
 
 
 
 
 
 
 
 
 
 
480void usbhs_pipe_data_sequence(struct usbhs_pipe *pipe, int sequence)
481{
482	u16 mask = (SQCLR | SQSET);
483	u16 val;
484
485	/*
486	 * sequence
487	 *  0  : data0
488	 *  1  : data1
489	 *  -1 : no change
490	 */
491	switch (sequence) {
492	case 0:
493		val = SQCLR;
494		break;
495	case 1:
496		val = SQSET;
497		break;
498	default:
499		return;
500	}
501
502	usbhsp_pipectrl_set(pipe, mask, val);
503}
504
 
 
 
 
 
505void usbhs_pipe_clear(struct usbhs_pipe *pipe)
506{
507	usbhsp_pipectrl_set(pipe, ACLRM, ACLRM);
508	usbhsp_pipectrl_set(pipe, ACLRM, 0);
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
509}
510
511static struct usbhs_pipe *usbhsp_get_pipe(struct usbhs_priv *priv, u32 type)
512{
513	struct usbhs_pipe *pos, *pipe;
514	int i;
515
516	/*
517	 * find target pipe
518	 */
519	pipe = NULL;
520	usbhs_for_each_pipe_with_dcp(pos, priv, i) {
521		if (!usbhs_pipe_type_is(pos, type))
522			continue;
523		if (usbhsp_flags_has(pos, IS_USED))
524			continue;
525
526		pipe = pos;
527		break;
528	}
529
530	if (!pipe)
531		return NULL;
532
533	/*
534	 * initialize pipe flags
535	 */
536	usbhsp_flags_init(pipe);
537	usbhsp_flags_set(pipe, IS_USED);
538
539	return pipe;
540}
541
 
 
 
 
 
542void usbhs_pipe_init(struct usbhs_priv *priv,
543		     int (*dma_map_ctrl)(struct usbhs_pkt *pkt, int map))
 
544{
545	struct usbhs_pipe_info *info = usbhs_priv_to_pipeinfo(priv);
546	struct usbhs_pipe *pipe;
547	int i;
548
549	/*
550	 * FIXME
551	 *
552	 * driver needs good allocator.
553	 *
554	 * find first free buffer area (BULK, ISOC)
555	 * (DCP, INT area is fixed)
556	 *
557	 * buffer number 0 - 3 have been reserved for DCP
558	 * see
559	 *	usbhsp_to_bufnmb
560	 */
561	info->bufnmb_last = 4;
562	usbhs_for_each_pipe_with_dcp(pipe, priv, i) {
563		if (usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_INT))
564			info->bufnmb_last++;
565
566		usbhsp_flags_init(pipe);
567		pipe->fifo = NULL;
568		pipe->mod_private = NULL;
569		INIT_LIST_HEAD(&pipe->list);
570
571		/* pipe force init */
572		usbhs_pipe_clear(pipe);
573	}
574
575	info->dma_map_ctrl = dma_map_ctrl;
576}
577
578struct usbhs_pipe *usbhs_pipe_malloc(struct usbhs_priv *priv,
579				     int endpoint_type,
580				     int dir_in)
581{
582	struct device *dev = usbhs_priv_to_dev(priv);
583	struct usbhs_pipe *pipe;
584	int is_host = usbhs_mod_is_host(priv);
585	int ret;
586	u16 pipecfg, pipebuf;
587
588	pipe = usbhsp_get_pipe(priv, endpoint_type);
589	if (!pipe) {
590		dev_err(dev, "can't get pipe (%s)\n",
591			usbhsp_pipe_name[endpoint_type]);
592		return NULL;
593	}
594
595	INIT_LIST_HEAD(&pipe->list);
596
597	usbhs_pipe_disable(pipe);
598
599	/* make sure pipe is not busy */
600	ret = usbhsp_pipe_barrier(pipe);
601	if (ret < 0) {
602		dev_err(dev, "pipe setup failed %d\n", usbhs_pipe_number(pipe));
603		return NULL;
604	}
605
606	pipecfg  = usbhsp_setup_pipecfg(pipe, is_host, dir_in);
 
 
 
 
607	pipebuf  = usbhsp_setup_pipebuff(pipe);
608
609	usbhsp_pipe_select(pipe);
610	usbhsp_pipe_cfg_set(pipe, 0xFFFF, pipecfg);
611	usbhsp_pipe_buf_set(pipe, 0xFFFF, pipebuf);
 
612
613	usbhs_pipe_sequence_data0(pipe);
614
615	dev_dbg(dev, "enable pipe %d : %s (%s)\n",
616		usbhs_pipe_number(pipe),
617		usbhs_pipe_name(pipe),
618		usbhs_pipe_is_dir_in(pipe) ? "in" : "out");
619
620	/*
621	 * epnum / maxp are still not set to this pipe.
622	 * call usbhs_pipe_config_update() after this function !!
623	 */
624
625	return pipe;
626}
627
 
 
 
 
 
 
 
628void usbhs_pipe_select_fifo(struct usbhs_pipe *pipe, struct usbhs_fifo *fifo)
629{
630	if (pipe->fifo)
631		pipe->fifo->pipe = NULL;
632
633	pipe->fifo = fifo;
634
635	if (fifo)
636		fifo->pipe = pipe;
637}
638
639
640/*
641 *		dcp control
642 */
643struct usbhs_pipe *usbhs_dcp_malloc(struct usbhs_priv *priv)
644{
645	struct usbhs_pipe *pipe;
646
647	pipe = usbhsp_get_pipe(priv, USB_ENDPOINT_XFER_CONTROL);
648	if (!pipe)
649		return NULL;
650
651	INIT_LIST_HEAD(&pipe->list);
652
653	/*
654	 * call usbhs_pipe_config_update() after this function !!
655	 */
656
657	return pipe;
658}
659
660void usbhs_dcp_control_transfer_done(struct usbhs_pipe *pipe)
661{
662	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
663
664	WARN_ON(!usbhs_pipe_is_dcp(pipe));
665
666	usbhs_pipe_enable(pipe);
667
668	if (!usbhs_mod_is_host(priv)) /* funconly */
669		usbhsp_pipectrl_set(pipe, CCPL, CCPL);
670}
671
672void usbhs_dcp_dir_for_host(struct usbhs_pipe *pipe, int dir_out)
673{
674	usbhsp_pipe_cfg_set(pipe, DIR_OUT,
675			    dir_out ? DIR_OUT : 0);
676}
677
678/*
679 *		pipe module function
680 */
681int usbhs_pipe_probe(struct usbhs_priv *priv)
682{
683	struct usbhs_pipe_info *info = usbhs_priv_to_pipeinfo(priv);
684	struct usbhs_pipe *pipe;
685	struct device *dev = usbhs_priv_to_dev(priv);
686	u32 *pipe_type = usbhs_get_dparam(priv, pipe_type);
 
687	int pipe_size = usbhs_get_dparam(priv, pipe_size);
688	int i;
689
690	/* This driver expects 1st pipe is DCP */
691	if (pipe_type[0] != USB_ENDPOINT_XFER_CONTROL) {
692		dev_err(dev, "1st PIPE is not DCP\n");
693		return -EINVAL;
694	}
695
696	info->pipe = kzalloc(sizeof(struct usbhs_pipe) * pipe_size, GFP_KERNEL);
697	if (!info->pipe) {
698		dev_err(dev, "Could not allocate pipe\n");
699		return -ENOMEM;
700	}
701
702	info->size = pipe_size;
703
704	/*
705	 * init pipe
706	 */
707	usbhs_for_each_pipe_with_dcp(pipe, priv, i) {
708		pipe->priv = priv;
709
710		usbhs_pipe_type(pipe) =
711			pipe_type[i] & USB_ENDPOINT_XFERTYPE_MASK;
712
713		dev_dbg(dev, "pipe %x\t: %s\n",
714			i, usbhsp_pipe_name[pipe_type[i]]);
715	}
716
717	return 0;
718}
719
720void usbhs_pipe_remove(struct usbhs_priv *priv)
721{
722	struct usbhs_pipe_info *info = usbhs_priv_to_pipeinfo(priv);
723
724	kfree(info->pipe);
725}