Loading...
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * xHCI host controller driver
4 *
5 * Copyright (C) 2008 Intel Corp.
6 *
7 * Author: Sarah Sharp
8 * Some code borrowed from the Linux EHCI driver.
9 */
10
11/*
12 * Ring initialization rules:
13 * 1. Each segment is initialized to zero, except for link TRBs.
14 * 2. Ring cycle state = 0. This represents Producer Cycle State (PCS) or
15 * Consumer Cycle State (CCS), depending on ring function.
16 * 3. Enqueue pointer = dequeue pointer = address of first TRB in the segment.
17 *
18 * Ring behavior rules:
19 * 1. A ring is empty if enqueue == dequeue. This means there will always be at
20 * least one free TRB in the ring. This is useful if you want to turn that
21 * into a link TRB and expand the ring.
22 * 2. When incrementing an enqueue or dequeue pointer, if the next TRB is a
23 * link TRB, then load the pointer with the address in the link TRB. If the
24 * link TRB had its toggle bit set, you may need to update the ring cycle
25 * state (see cycle bit rules). You may have to do this multiple times
26 * until you reach a non-link TRB.
27 * 3. A ring is full if enqueue++ (for the definition of increment above)
28 * equals the dequeue pointer.
29 *
30 * Cycle bit rules:
31 * 1. When a consumer increments a dequeue pointer and encounters a toggle bit
32 * in a link TRB, it must toggle the ring cycle state.
33 * 2. When a producer increments an enqueue pointer and encounters a toggle bit
34 * in a link TRB, it must toggle the ring cycle state.
35 *
36 * Producer rules:
37 * 1. Check if ring is full before you enqueue.
38 * 2. Write the ring cycle state to the cycle bit in the TRB you're enqueuing.
39 * Update enqueue pointer between each write (which may update the ring
40 * cycle state).
41 * 3. Notify consumer. If SW is producer, it rings the doorbell for command
42 * and endpoint rings. If HC is the producer for the event ring,
43 * and it generates an interrupt according to interrupt modulation rules.
44 *
45 * Consumer rules:
46 * 1. Check if TRB belongs to you. If the cycle bit == your ring cycle state,
47 * the TRB is owned by the consumer.
48 * 2. Update dequeue pointer (which may update the ring cycle state) and
49 * continue processing TRBs until you reach a TRB which is not owned by you.
50 * 3. Notify the producer. SW is the consumer for the event ring, and it
51 * updates event ring dequeue pointer. HC is the consumer for the command and
52 * endpoint rings; it generates events on the event ring for these.
53 */
54
55#include <linux/scatterlist.h>
56#include <linux/slab.h>
57#include <linux/dma-mapping.h>
58#include "xhci.h"
59#include "xhci-trace.h"
60
61static int queue_command(struct xhci_hcd *xhci, struct xhci_command *cmd,
62 u32 field1, u32 field2,
63 u32 field3, u32 field4, bool command_must_succeed);
64
65/*
66 * Returns zero if the TRB isn't in this segment, otherwise it returns the DMA
67 * address of the TRB.
68 */
69dma_addr_t xhci_trb_virt_to_dma(struct xhci_segment *seg,
70 union xhci_trb *trb)
71{
72 unsigned long segment_offset;
73
74 if (!seg || !trb || trb < seg->trbs)
75 return 0;
76 /* offset in TRBs */
77 segment_offset = trb - seg->trbs;
78 if (segment_offset >= TRBS_PER_SEGMENT)
79 return 0;
80 return seg->dma + (segment_offset * sizeof(*trb));
81}
82
83static bool trb_is_noop(union xhci_trb *trb)
84{
85 return TRB_TYPE_NOOP_LE32(trb->generic.field[3]);
86}
87
88static bool trb_is_link(union xhci_trb *trb)
89{
90 return TRB_TYPE_LINK_LE32(trb->link.control);
91}
92
93static bool last_trb_on_seg(struct xhci_segment *seg, union xhci_trb *trb)
94{
95 return trb == &seg->trbs[TRBS_PER_SEGMENT - 1];
96}
97
98static bool last_trb_on_ring(struct xhci_ring *ring,
99 struct xhci_segment *seg, union xhci_trb *trb)
100{
101 return last_trb_on_seg(seg, trb) && (seg->next == ring->first_seg);
102}
103
104static bool link_trb_toggles_cycle(union xhci_trb *trb)
105{
106 return le32_to_cpu(trb->link.control) & LINK_TOGGLE;
107}
108
109static bool last_td_in_urb(struct xhci_td *td)
110{
111 struct urb_priv *urb_priv = td->urb->hcpriv;
112
113 return urb_priv->num_tds_done == urb_priv->num_tds;
114}
115
116static void inc_td_cnt(struct urb *urb)
117{
118 struct urb_priv *urb_priv = urb->hcpriv;
119
120 urb_priv->num_tds_done++;
121}
122
123static void trb_to_noop(union xhci_trb *trb, u32 noop_type)
124{
125 if (trb_is_link(trb)) {
126 /* unchain chained link TRBs */
127 trb->link.control &= cpu_to_le32(~TRB_CHAIN);
128 } else {
129 trb->generic.field[0] = 0;
130 trb->generic.field[1] = 0;
131 trb->generic.field[2] = 0;
132 /* Preserve only the cycle bit of this TRB */
133 trb->generic.field[3] &= cpu_to_le32(TRB_CYCLE);
134 trb->generic.field[3] |= cpu_to_le32(TRB_TYPE(noop_type));
135 }
136}
137
138/* Updates trb to point to the next TRB in the ring, and updates seg if the next
139 * TRB is in a new segment. This does not skip over link TRBs, and it does not
140 * effect the ring dequeue or enqueue pointers.
141 */
142static void next_trb(struct xhci_hcd *xhci,
143 struct xhci_ring *ring,
144 struct xhci_segment **seg,
145 union xhci_trb **trb)
146{
147 if (trb_is_link(*trb) || last_trb_on_seg(*seg, *trb)) {
148 *seg = (*seg)->next;
149 *trb = ((*seg)->trbs);
150 } else {
151 (*trb)++;
152 }
153}
154
155/*
156 * See Cycle bit rules. SW is the consumer for the event ring only.
157 */
158void inc_deq(struct xhci_hcd *xhci, struct xhci_ring *ring)
159{
160 unsigned int link_trb_count = 0;
161
162 /* event ring doesn't have link trbs, check for last trb */
163 if (ring->type == TYPE_EVENT) {
164 if (!last_trb_on_seg(ring->deq_seg, ring->dequeue)) {
165 ring->dequeue++;
166 goto out;
167 }
168 if (last_trb_on_ring(ring, ring->deq_seg, ring->dequeue))
169 ring->cycle_state ^= 1;
170 ring->deq_seg = ring->deq_seg->next;
171 ring->dequeue = ring->deq_seg->trbs;
172 goto out;
173 }
174
175 /* All other rings have link trbs */
176 if (!trb_is_link(ring->dequeue)) {
177 if (last_trb_on_seg(ring->deq_seg, ring->dequeue))
178 xhci_warn(xhci, "Missing link TRB at end of segment\n");
179 else
180 ring->dequeue++;
181 }
182
183 while (trb_is_link(ring->dequeue)) {
184 ring->deq_seg = ring->deq_seg->next;
185 ring->dequeue = ring->deq_seg->trbs;
186
187 if (link_trb_count++ > ring->num_segs) {
188 xhci_warn(xhci, "Ring is an endless link TRB loop\n");
189 break;
190 }
191 }
192out:
193 trace_xhci_inc_deq(ring);
194
195 return;
196}
197
198/*
199 * See Cycle bit rules. SW is the consumer for the event ring only.
200 *
201 * If we've just enqueued a TRB that is in the middle of a TD (meaning the
202 * chain bit is set), then set the chain bit in all the following link TRBs.
203 * If we've enqueued the last TRB in a TD, make sure the following link TRBs
204 * have their chain bit cleared (so that each Link TRB is a separate TD).
205 *
206 * Section 6.4.4.1 of the 0.95 spec says link TRBs cannot have the chain bit
207 * set, but other sections talk about dealing with the chain bit set. This was
208 * fixed in the 0.96 specification errata, but we have to assume that all 0.95
209 * xHCI hardware can't handle the chain bit being cleared on a link TRB.
210 *
211 * @more_trbs_coming: Will you enqueue more TRBs before calling
212 * prepare_transfer()?
213 */
214static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring,
215 bool more_trbs_coming)
216{
217 u32 chain;
218 union xhci_trb *next;
219 unsigned int link_trb_count = 0;
220
221 chain = le32_to_cpu(ring->enqueue->generic.field[3]) & TRB_CHAIN;
222
223 if (last_trb_on_seg(ring->enq_seg, ring->enqueue)) {
224 xhci_err(xhci, "Tried to move enqueue past ring segment\n");
225 return;
226 }
227
228 next = ++(ring->enqueue);
229
230 /* Update the dequeue pointer further if that was a link TRB */
231 while (trb_is_link(next)) {
232
233 /*
234 * If the caller doesn't plan on enqueueing more TDs before
235 * ringing the doorbell, then we don't want to give the link TRB
236 * to the hardware just yet. We'll give the link TRB back in
237 * prepare_ring() just before we enqueue the TD at the top of
238 * the ring.
239 */
240 if (!chain && !more_trbs_coming)
241 break;
242
243 /* If we're not dealing with 0.95 hardware or isoc rings on
244 * AMD 0.96 host, carry over the chain bit of the previous TRB
245 * (which may mean the chain bit is cleared).
246 */
247 if (!(ring->type == TYPE_ISOC &&
248 (xhci->quirks & XHCI_AMD_0x96_HOST)) &&
249 !xhci_link_trb_quirk(xhci)) {
250 next->link.control &= cpu_to_le32(~TRB_CHAIN);
251 next->link.control |= cpu_to_le32(chain);
252 }
253 /* Give this link TRB to the hardware */
254 wmb();
255 next->link.control ^= cpu_to_le32(TRB_CYCLE);
256
257 /* Toggle the cycle bit after the last ring segment. */
258 if (link_trb_toggles_cycle(next))
259 ring->cycle_state ^= 1;
260
261 ring->enq_seg = ring->enq_seg->next;
262 ring->enqueue = ring->enq_seg->trbs;
263 next = ring->enqueue;
264
265 if (link_trb_count++ > ring->num_segs) {
266 xhci_warn(xhci, "%s: Ring link TRB loop\n", __func__);
267 break;
268 }
269 }
270
271 trace_xhci_inc_enq(ring);
272}
273
274/*
275 * Return number of free normal TRBs from enqueue to dequeue pointer on ring.
276 * Not counting an assumed link TRB at end of each TRBS_PER_SEGMENT sized segment.
277 * Only for transfer and command rings where driver is the producer, not for
278 * event rings.
279 */
280static unsigned int xhci_num_trbs_free(struct xhci_hcd *xhci, struct xhci_ring *ring)
281{
282 struct xhci_segment *enq_seg = ring->enq_seg;
283 union xhci_trb *enq = ring->enqueue;
284 union xhci_trb *last_on_seg;
285 unsigned int free = 0;
286 int i = 0;
287
288 /* Ring might be empty even if enq != deq if enq is left on a link trb */
289 if (trb_is_link(enq)) {
290 enq_seg = enq_seg->next;
291 enq = enq_seg->trbs;
292 }
293
294 /* Empty ring, common case, don't walk the segments */
295 if (enq == ring->dequeue)
296 return ring->num_segs * (TRBS_PER_SEGMENT - 1);
297
298 do {
299 if (ring->deq_seg == enq_seg && ring->dequeue >= enq)
300 return free + (ring->dequeue - enq);
301 last_on_seg = &enq_seg->trbs[TRBS_PER_SEGMENT - 1];
302 free += last_on_seg - enq;
303 enq_seg = enq_seg->next;
304 enq = enq_seg->trbs;
305 } while (i++ <= ring->num_segs);
306
307 return free;
308}
309
310/*
311 * Check to see if there's room to enqueue num_trbs on the ring and make sure
312 * enqueue pointer will not advance into dequeue segment. See rules above.
313 * return number of new segments needed to ensure this.
314 */
315
316static unsigned int xhci_ring_expansion_needed(struct xhci_hcd *xhci, struct xhci_ring *ring,
317 unsigned int num_trbs)
318{
319 struct xhci_segment *seg;
320 int trbs_past_seg;
321 int enq_used;
322 int new_segs;
323
324 enq_used = ring->enqueue - ring->enq_seg->trbs;
325
326 /* how many trbs will be queued past the enqueue segment? */
327 trbs_past_seg = enq_used + num_trbs - (TRBS_PER_SEGMENT - 1);
328
329 /*
330 * Consider expanding the ring already if num_trbs fills the current
331 * segment (i.e. trbs_past_seg == 0), not only when num_trbs goes into
332 * the next segment. Avoids confusing full ring with special empty ring
333 * case below
334 */
335 if (trbs_past_seg < 0)
336 return 0;
337
338 /* Empty ring special case, enqueue stuck on link trb while dequeue advanced */
339 if (trb_is_link(ring->enqueue) && ring->enq_seg->next->trbs == ring->dequeue)
340 return 0;
341
342 new_segs = 1 + (trbs_past_seg / (TRBS_PER_SEGMENT - 1));
343 seg = ring->enq_seg;
344
345 while (new_segs > 0) {
346 seg = seg->next;
347 if (seg == ring->deq_seg) {
348 xhci_dbg(xhci, "Ring expansion by %d segments needed\n",
349 new_segs);
350 xhci_dbg(xhci, "Adding %d trbs moves enq %d trbs into deq seg\n",
351 num_trbs, trbs_past_seg % TRBS_PER_SEGMENT);
352 return new_segs;
353 }
354 new_segs--;
355 }
356
357 return 0;
358}
359
360/* Ring the host controller doorbell after placing a command on the ring */
361void xhci_ring_cmd_db(struct xhci_hcd *xhci)
362{
363 if (!(xhci->cmd_ring_state & CMD_RING_STATE_RUNNING))
364 return;
365
366 xhci_dbg(xhci, "// Ding dong!\n");
367
368 trace_xhci_ring_host_doorbell(0, DB_VALUE_HOST);
369
370 writel(DB_VALUE_HOST, &xhci->dba->doorbell[0]);
371 /* Flush PCI posted writes */
372 readl(&xhci->dba->doorbell[0]);
373}
374
375static bool xhci_mod_cmd_timer(struct xhci_hcd *xhci)
376{
377 return mod_delayed_work(system_wq, &xhci->cmd_timer,
378 msecs_to_jiffies(xhci->current_cmd->timeout_ms));
379}
380
381static struct xhci_command *xhci_next_queued_cmd(struct xhci_hcd *xhci)
382{
383 return list_first_entry_or_null(&xhci->cmd_list, struct xhci_command,
384 cmd_list);
385}
386
387/*
388 * Turn all commands on command ring with status set to "aborted" to no-op trbs.
389 * If there are other commands waiting then restart the ring and kick the timer.
390 * This must be called with command ring stopped and xhci->lock held.
391 */
392static void xhci_handle_stopped_cmd_ring(struct xhci_hcd *xhci,
393 struct xhci_command *cur_cmd)
394{
395 struct xhci_command *i_cmd;
396
397 /* Turn all aborted commands in list to no-ops, then restart */
398 list_for_each_entry(i_cmd, &xhci->cmd_list, cmd_list) {
399
400 if (i_cmd->status != COMP_COMMAND_ABORTED)
401 continue;
402
403 i_cmd->status = COMP_COMMAND_RING_STOPPED;
404
405 xhci_dbg(xhci, "Turn aborted command %p to no-op\n",
406 i_cmd->command_trb);
407
408 trb_to_noop(i_cmd->command_trb, TRB_CMD_NOOP);
409
410 /*
411 * caller waiting for completion is called when command
412 * completion event is received for these no-op commands
413 */
414 }
415
416 xhci->cmd_ring_state = CMD_RING_STATE_RUNNING;
417
418 /* ring command ring doorbell to restart the command ring */
419 if ((xhci->cmd_ring->dequeue != xhci->cmd_ring->enqueue) &&
420 !(xhci->xhc_state & XHCI_STATE_DYING)) {
421 xhci->current_cmd = cur_cmd;
422 xhci_mod_cmd_timer(xhci);
423 xhci_ring_cmd_db(xhci);
424 }
425}
426
427/* Must be called with xhci->lock held, releases and aquires lock back */
428static int xhci_abort_cmd_ring(struct xhci_hcd *xhci, unsigned long flags)
429{
430 struct xhci_segment *new_seg = xhci->cmd_ring->deq_seg;
431 union xhci_trb *new_deq = xhci->cmd_ring->dequeue;
432 u64 crcr;
433 int ret;
434
435 xhci_dbg(xhci, "Abort command ring\n");
436
437 reinit_completion(&xhci->cmd_ring_stop_completion);
438
439 /*
440 * The control bits like command stop, abort are located in lower
441 * dword of the command ring control register.
442 * Some controllers require all 64 bits to be written to abort the ring.
443 * Make sure the upper dword is valid, pointing to the next command,
444 * avoiding corrupting the command ring pointer in case the command ring
445 * is stopped by the time the upper dword is written.
446 */
447 next_trb(xhci, NULL, &new_seg, &new_deq);
448 if (trb_is_link(new_deq))
449 next_trb(xhci, NULL, &new_seg, &new_deq);
450
451 crcr = xhci_trb_virt_to_dma(new_seg, new_deq);
452 xhci_write_64(xhci, crcr | CMD_RING_ABORT, &xhci->op_regs->cmd_ring);
453
454 /* Section 4.6.1.2 of xHCI 1.0 spec says software should also time the
455 * completion of the Command Abort operation. If CRR is not negated in 5
456 * seconds then driver handles it as if host died (-ENODEV).
457 * In the future we should distinguish between -ENODEV and -ETIMEDOUT
458 * and try to recover a -ETIMEDOUT with a host controller reset.
459 */
460 ret = xhci_handshake_check_state(xhci, &xhci->op_regs->cmd_ring,
461 CMD_RING_RUNNING, 0, 5 * 1000 * 1000,
462 XHCI_STATE_REMOVING);
463 if (ret < 0) {
464 xhci_err(xhci, "Abort failed to stop command ring: %d\n", ret);
465 xhci_halt(xhci);
466 xhci_hc_died(xhci);
467 return ret;
468 }
469 /*
470 * Writing the CMD_RING_ABORT bit should cause a cmd completion event,
471 * however on some host hw the CMD_RING_RUNNING bit is correctly cleared
472 * but the completion event in never sent. Wait 2 secs (arbitrary
473 * number) to handle those cases after negation of CMD_RING_RUNNING.
474 */
475 spin_unlock_irqrestore(&xhci->lock, flags);
476 ret = wait_for_completion_timeout(&xhci->cmd_ring_stop_completion,
477 msecs_to_jiffies(2000));
478 spin_lock_irqsave(&xhci->lock, flags);
479 if (!ret) {
480 xhci_dbg(xhci, "No stop event for abort, ring start fail?\n");
481 xhci_cleanup_command_queue(xhci);
482 } else {
483 xhci_handle_stopped_cmd_ring(xhci, xhci_next_queued_cmd(xhci));
484 }
485 return 0;
486}
487
488void xhci_ring_ep_doorbell(struct xhci_hcd *xhci,
489 unsigned int slot_id,
490 unsigned int ep_index,
491 unsigned int stream_id)
492{
493 __le32 __iomem *db_addr = &xhci->dba->doorbell[slot_id];
494 struct xhci_virt_ep *ep = &xhci->devs[slot_id]->eps[ep_index];
495 unsigned int ep_state = ep->ep_state;
496
497 /* Don't ring the doorbell for this endpoint if there are pending
498 * cancellations because we don't want to interrupt processing.
499 * We don't want to restart any stream rings if there's a set dequeue
500 * pointer command pending because the device can choose to start any
501 * stream once the endpoint is on the HW schedule.
502 */
503 if ((ep_state & EP_STOP_CMD_PENDING) || (ep_state & SET_DEQ_PENDING) ||
504 (ep_state & EP_HALTED) || (ep_state & EP_CLEARING_TT))
505 return;
506
507 trace_xhci_ring_ep_doorbell(slot_id, DB_VALUE(ep_index, stream_id));
508
509 writel(DB_VALUE(ep_index, stream_id), db_addr);
510 /* flush the write */
511 readl(db_addr);
512}
513
514/* Ring the doorbell for any rings with pending URBs */
515static void ring_doorbell_for_active_rings(struct xhci_hcd *xhci,
516 unsigned int slot_id,
517 unsigned int ep_index)
518{
519 unsigned int stream_id;
520 struct xhci_virt_ep *ep;
521
522 ep = &xhci->devs[slot_id]->eps[ep_index];
523
524 /* A ring has pending URBs if its TD list is not empty */
525 if (!(ep->ep_state & EP_HAS_STREAMS)) {
526 if (ep->ring && !(list_empty(&ep->ring->td_list)))
527 xhci_ring_ep_doorbell(xhci, slot_id, ep_index, 0);
528 return;
529 }
530
531 for (stream_id = 1; stream_id < ep->stream_info->num_streams;
532 stream_id++) {
533 struct xhci_stream_info *stream_info = ep->stream_info;
534 if (!list_empty(&stream_info->stream_rings[stream_id]->td_list))
535 xhci_ring_ep_doorbell(xhci, slot_id, ep_index,
536 stream_id);
537 }
538}
539
540void xhci_ring_doorbell_for_active_rings(struct xhci_hcd *xhci,
541 unsigned int slot_id,
542 unsigned int ep_index)
543{
544 ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
545}
546
547static struct xhci_virt_ep *xhci_get_virt_ep(struct xhci_hcd *xhci,
548 unsigned int slot_id,
549 unsigned int ep_index)
550{
551 if (slot_id == 0 || slot_id >= MAX_HC_SLOTS) {
552 xhci_warn(xhci, "Invalid slot_id %u\n", slot_id);
553 return NULL;
554 }
555 if (ep_index >= EP_CTX_PER_DEV) {
556 xhci_warn(xhci, "Invalid endpoint index %u\n", ep_index);
557 return NULL;
558 }
559 if (!xhci->devs[slot_id]) {
560 xhci_warn(xhci, "No xhci virt device for slot_id %u\n", slot_id);
561 return NULL;
562 }
563
564 return &xhci->devs[slot_id]->eps[ep_index];
565}
566
567static struct xhci_ring *xhci_virt_ep_to_ring(struct xhci_hcd *xhci,
568 struct xhci_virt_ep *ep,
569 unsigned int stream_id)
570{
571 /* common case, no streams */
572 if (!(ep->ep_state & EP_HAS_STREAMS))
573 return ep->ring;
574
575 if (!ep->stream_info)
576 return NULL;
577
578 if (stream_id == 0 || stream_id >= ep->stream_info->num_streams) {
579 xhci_warn(xhci, "Invalid stream_id %u request for slot_id %u ep_index %u\n",
580 stream_id, ep->vdev->slot_id, ep->ep_index);
581 return NULL;
582 }
583
584 return ep->stream_info->stream_rings[stream_id];
585}
586
587/* Get the right ring for the given slot_id, ep_index and stream_id.
588 * If the endpoint supports streams, boundary check the URB's stream ID.
589 * If the endpoint doesn't support streams, return the singular endpoint ring.
590 */
591struct xhci_ring *xhci_triad_to_transfer_ring(struct xhci_hcd *xhci,
592 unsigned int slot_id, unsigned int ep_index,
593 unsigned int stream_id)
594{
595 struct xhci_virt_ep *ep;
596
597 ep = xhci_get_virt_ep(xhci, slot_id, ep_index);
598 if (!ep)
599 return NULL;
600
601 return xhci_virt_ep_to_ring(xhci, ep, stream_id);
602}
603
604
605/*
606 * Get the hw dequeue pointer xHC stopped on, either directly from the
607 * endpoint context, or if streams are in use from the stream context.
608 * The returned hw_dequeue contains the lowest four bits with cycle state
609 * and possbile stream context type.
610 */
611static u64 xhci_get_hw_deq(struct xhci_hcd *xhci, struct xhci_virt_device *vdev,
612 unsigned int ep_index, unsigned int stream_id)
613{
614 struct xhci_ep_ctx *ep_ctx;
615 struct xhci_stream_ctx *st_ctx;
616 struct xhci_virt_ep *ep;
617
618 ep = &vdev->eps[ep_index];
619
620 if (ep->ep_state & EP_HAS_STREAMS) {
621 st_ctx = &ep->stream_info->stream_ctx_array[stream_id];
622 return le64_to_cpu(st_ctx->stream_ring);
623 }
624 ep_ctx = xhci_get_ep_ctx(xhci, vdev->out_ctx, ep_index);
625 return le64_to_cpu(ep_ctx->deq);
626}
627
628static int xhci_move_dequeue_past_td(struct xhci_hcd *xhci,
629 unsigned int slot_id, unsigned int ep_index,
630 unsigned int stream_id, struct xhci_td *td)
631{
632 struct xhci_virt_device *dev = xhci->devs[slot_id];
633 struct xhci_virt_ep *ep = &dev->eps[ep_index];
634 struct xhci_ring *ep_ring;
635 struct xhci_command *cmd;
636 struct xhci_segment *new_seg;
637 union xhci_trb *new_deq;
638 int new_cycle;
639 dma_addr_t addr;
640 u64 hw_dequeue;
641 bool cycle_found = false;
642 bool td_last_trb_found = false;
643 u32 trb_sct = 0;
644 int ret;
645
646 ep_ring = xhci_triad_to_transfer_ring(xhci, slot_id,
647 ep_index, stream_id);
648 if (!ep_ring) {
649 xhci_warn(xhci, "WARN can't find new dequeue, invalid stream ID %u\n",
650 stream_id);
651 return -ENODEV;
652 }
653 /*
654 * A cancelled TD can complete with a stall if HW cached the trb.
655 * In this case driver can't find td, but if the ring is empty we
656 * can move the dequeue pointer to the current enqueue position.
657 * We shouldn't hit this anymore as cached cancelled TRBs are given back
658 * after clearing the cache, but be on the safe side and keep it anyway
659 */
660 if (!td) {
661 if (list_empty(&ep_ring->td_list)) {
662 new_seg = ep_ring->enq_seg;
663 new_deq = ep_ring->enqueue;
664 new_cycle = ep_ring->cycle_state;
665 xhci_dbg(xhci, "ep ring empty, Set new dequeue = enqueue");
666 goto deq_found;
667 } else {
668 xhci_warn(xhci, "Can't find new dequeue state, missing td\n");
669 return -EINVAL;
670 }
671 }
672
673 hw_dequeue = xhci_get_hw_deq(xhci, dev, ep_index, stream_id);
674 new_seg = ep_ring->deq_seg;
675 new_deq = ep_ring->dequeue;
676 new_cycle = hw_dequeue & 0x1;
677
678 /*
679 * We want to find the pointer, segment and cycle state of the new trb
680 * (the one after current TD's last_trb). We know the cycle state at
681 * hw_dequeue, so walk the ring until both hw_dequeue and last_trb are
682 * found.
683 */
684 do {
685 if (!cycle_found && xhci_trb_virt_to_dma(new_seg, new_deq)
686 == (dma_addr_t)(hw_dequeue & ~0xf)) {
687 cycle_found = true;
688 if (td_last_trb_found)
689 break;
690 }
691 if (new_deq == td->last_trb)
692 td_last_trb_found = true;
693
694 if (cycle_found && trb_is_link(new_deq) &&
695 link_trb_toggles_cycle(new_deq))
696 new_cycle ^= 0x1;
697
698 next_trb(xhci, ep_ring, &new_seg, &new_deq);
699
700 /* Search wrapped around, bail out */
701 if (new_deq == ep->ring->dequeue) {
702 xhci_err(xhci, "Error: Failed finding new dequeue state\n");
703 return -EINVAL;
704 }
705
706 } while (!cycle_found || !td_last_trb_found);
707
708deq_found:
709
710 /* Don't update the ring cycle state for the producer (us). */
711 addr = xhci_trb_virt_to_dma(new_seg, new_deq);
712 if (addr == 0) {
713 xhci_warn(xhci, "Can't find dma of new dequeue ptr\n");
714 xhci_warn(xhci, "deq seg = %p, deq ptr = %p\n", new_seg, new_deq);
715 return -EINVAL;
716 }
717
718 if ((ep->ep_state & SET_DEQ_PENDING)) {
719 xhci_warn(xhci, "Set TR Deq already pending, don't submit for 0x%pad\n",
720 &addr);
721 return -EBUSY;
722 }
723
724 /* This function gets called from contexts where it cannot sleep */
725 cmd = xhci_alloc_command(xhci, false, GFP_ATOMIC);
726 if (!cmd) {
727 xhci_warn(xhci, "Can't alloc Set TR Deq cmd 0x%pad\n", &addr);
728 return -ENOMEM;
729 }
730
731 if (stream_id)
732 trb_sct = SCT_FOR_TRB(SCT_PRI_TR);
733 ret = queue_command(xhci, cmd,
734 lower_32_bits(addr) | trb_sct | new_cycle,
735 upper_32_bits(addr),
736 STREAM_ID_FOR_TRB(stream_id), SLOT_ID_FOR_TRB(slot_id) |
737 EP_ID_FOR_TRB(ep_index) | TRB_TYPE(TRB_SET_DEQ), false);
738 if (ret < 0) {
739 xhci_free_command(xhci, cmd);
740 return ret;
741 }
742 ep->queued_deq_seg = new_seg;
743 ep->queued_deq_ptr = new_deq;
744
745 xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
746 "Set TR Deq ptr 0x%llx, cycle %u\n", addr, new_cycle);
747
748 /* Stop the TD queueing code from ringing the doorbell until
749 * this command completes. The HC won't set the dequeue pointer
750 * if the ring is running, and ringing the doorbell starts the
751 * ring running.
752 */
753 ep->ep_state |= SET_DEQ_PENDING;
754 xhci_ring_cmd_db(xhci);
755 return 0;
756}
757
758/* flip_cycle means flip the cycle bit of all but the first and last TRB.
759 * (The last TRB actually points to the ring enqueue pointer, which is not part
760 * of this TD.) This is used to remove partially enqueued isoc TDs from a ring.
761 */
762static void td_to_noop(struct xhci_hcd *xhci, struct xhci_ring *ep_ring,
763 struct xhci_td *td, bool flip_cycle)
764{
765 struct xhci_segment *seg = td->start_seg;
766 union xhci_trb *trb = td->first_trb;
767
768 while (1) {
769 trb_to_noop(trb, TRB_TR_NOOP);
770
771 /* flip cycle if asked to */
772 if (flip_cycle && trb != td->first_trb && trb != td->last_trb)
773 trb->generic.field[3] ^= cpu_to_le32(TRB_CYCLE);
774
775 if (trb == td->last_trb)
776 break;
777
778 next_trb(xhci, ep_ring, &seg, &trb);
779 }
780}
781
782/*
783 * Must be called with xhci->lock held in interrupt context,
784 * releases and re-acquires xhci->lock
785 */
786static void xhci_giveback_urb_in_irq(struct xhci_hcd *xhci,
787 struct xhci_td *cur_td, int status)
788{
789 struct urb *urb = cur_td->urb;
790 struct urb_priv *urb_priv = urb->hcpriv;
791 struct usb_hcd *hcd = bus_to_hcd(urb->dev->bus);
792
793 if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
794 xhci_to_hcd(xhci)->self.bandwidth_isoc_reqs--;
795 if (xhci_to_hcd(xhci)->self.bandwidth_isoc_reqs == 0) {
796 if (xhci->quirks & XHCI_AMD_PLL_FIX)
797 usb_amd_quirk_pll_enable();
798 }
799 }
800 xhci_urb_free_priv(urb_priv);
801 usb_hcd_unlink_urb_from_ep(hcd, urb);
802 trace_xhci_urb_giveback(urb);
803 usb_hcd_giveback_urb(hcd, urb, status);
804}
805
806static void xhci_unmap_td_bounce_buffer(struct xhci_hcd *xhci,
807 struct xhci_ring *ring, struct xhci_td *td)
808{
809 struct device *dev = xhci_to_hcd(xhci)->self.sysdev;
810 struct xhci_segment *seg = td->bounce_seg;
811 struct urb *urb = td->urb;
812 size_t len;
813
814 if (!ring || !seg || !urb)
815 return;
816
817 if (usb_urb_dir_out(urb)) {
818 dma_unmap_single(dev, seg->bounce_dma, ring->bounce_buf_len,
819 DMA_TO_DEVICE);
820 return;
821 }
822
823 dma_unmap_single(dev, seg->bounce_dma, ring->bounce_buf_len,
824 DMA_FROM_DEVICE);
825 /* for in tranfers we need to copy the data from bounce to sg */
826 if (urb->num_sgs) {
827 len = sg_pcopy_from_buffer(urb->sg, urb->num_sgs, seg->bounce_buf,
828 seg->bounce_len, seg->bounce_offs);
829 if (len != seg->bounce_len)
830 xhci_warn(xhci, "WARN Wrong bounce buffer read length: %zu != %d\n",
831 len, seg->bounce_len);
832 } else {
833 memcpy(urb->transfer_buffer + seg->bounce_offs, seg->bounce_buf,
834 seg->bounce_len);
835 }
836 seg->bounce_len = 0;
837 seg->bounce_offs = 0;
838}
839
840static int xhci_td_cleanup(struct xhci_hcd *xhci, struct xhci_td *td,
841 struct xhci_ring *ep_ring, int status)
842{
843 struct urb *urb = NULL;
844
845 /* Clean up the endpoint's TD list */
846 urb = td->urb;
847
848 /* if a bounce buffer was used to align this td then unmap it */
849 xhci_unmap_td_bounce_buffer(xhci, ep_ring, td);
850
851 /* Do one last check of the actual transfer length.
852 * If the host controller said we transferred more data than the buffer
853 * length, urb->actual_length will be a very big number (since it's
854 * unsigned). Play it safe and say we didn't transfer anything.
855 */
856 if (urb->actual_length > urb->transfer_buffer_length) {
857 xhci_warn(xhci, "URB req %u and actual %u transfer length mismatch\n",
858 urb->transfer_buffer_length, urb->actual_length);
859 urb->actual_length = 0;
860 status = 0;
861 }
862 /* TD might be removed from td_list if we are giving back a cancelled URB */
863 if (!list_empty(&td->td_list))
864 list_del_init(&td->td_list);
865 /* Giving back a cancelled URB, or if a slated TD completed anyway */
866 if (!list_empty(&td->cancelled_td_list))
867 list_del_init(&td->cancelled_td_list);
868
869 inc_td_cnt(urb);
870 /* Giveback the urb when all the tds are completed */
871 if (last_td_in_urb(td)) {
872 if ((urb->actual_length != urb->transfer_buffer_length &&
873 (urb->transfer_flags & URB_SHORT_NOT_OK)) ||
874 (status != 0 && !usb_endpoint_xfer_isoc(&urb->ep->desc)))
875 xhci_dbg(xhci, "Giveback URB %p, len = %d, expected = %d, status = %d\n",
876 urb, urb->actual_length,
877 urb->transfer_buffer_length, status);
878
879 /* set isoc urb status to 0 just as EHCI, UHCI, and OHCI */
880 if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS)
881 status = 0;
882 xhci_giveback_urb_in_irq(xhci, td, status);
883 }
884
885 return 0;
886}
887
888
889/* Complete the cancelled URBs we unlinked from td_list. */
890static void xhci_giveback_invalidated_tds(struct xhci_virt_ep *ep)
891{
892 struct xhci_ring *ring;
893 struct xhci_td *td, *tmp_td;
894
895 list_for_each_entry_safe(td, tmp_td, &ep->cancelled_td_list,
896 cancelled_td_list) {
897
898 ring = xhci_urb_to_transfer_ring(ep->xhci, td->urb);
899
900 if (td->cancel_status == TD_CLEARED) {
901 xhci_dbg(ep->xhci, "%s: Giveback cancelled URB %p TD\n",
902 __func__, td->urb);
903 xhci_td_cleanup(ep->xhci, td, ring, td->status);
904 } else {
905 xhci_dbg(ep->xhci, "%s: Keep cancelled URB %p TD as cancel_status is %d\n",
906 __func__, td->urb, td->cancel_status);
907 }
908 if (ep->xhci->xhc_state & XHCI_STATE_DYING)
909 return;
910 }
911}
912
913static int xhci_reset_halted_ep(struct xhci_hcd *xhci, unsigned int slot_id,
914 unsigned int ep_index, enum xhci_ep_reset_type reset_type)
915{
916 struct xhci_command *command;
917 int ret = 0;
918
919 command = xhci_alloc_command(xhci, false, GFP_ATOMIC);
920 if (!command) {
921 ret = -ENOMEM;
922 goto done;
923 }
924
925 xhci_dbg(xhci, "%s-reset ep %u, slot %u\n",
926 (reset_type == EP_HARD_RESET) ? "Hard" : "Soft",
927 ep_index, slot_id);
928
929 ret = xhci_queue_reset_ep(xhci, command, slot_id, ep_index, reset_type);
930done:
931 if (ret)
932 xhci_err(xhci, "ERROR queuing reset endpoint for slot %d ep_index %d, %d\n",
933 slot_id, ep_index, ret);
934 return ret;
935}
936
937static int xhci_handle_halted_endpoint(struct xhci_hcd *xhci,
938 struct xhci_virt_ep *ep,
939 struct xhci_td *td,
940 enum xhci_ep_reset_type reset_type)
941{
942 unsigned int slot_id = ep->vdev->slot_id;
943 int err;
944
945 /*
946 * Avoid resetting endpoint if link is inactive. Can cause host hang.
947 * Device will be reset soon to recover the link so don't do anything
948 */
949 if (ep->vdev->flags & VDEV_PORT_ERROR)
950 return -ENODEV;
951
952 /* add td to cancelled list and let reset ep handler take care of it */
953 if (reset_type == EP_HARD_RESET) {
954 ep->ep_state |= EP_HARD_CLEAR_TOGGLE;
955 if (td && list_empty(&td->cancelled_td_list)) {
956 list_add_tail(&td->cancelled_td_list, &ep->cancelled_td_list);
957 td->cancel_status = TD_HALTED;
958 }
959 }
960
961 if (ep->ep_state & EP_HALTED) {
962 xhci_dbg(xhci, "Reset ep command for ep_index %d already pending\n",
963 ep->ep_index);
964 return 0;
965 }
966
967 err = xhci_reset_halted_ep(xhci, slot_id, ep->ep_index, reset_type);
968 if (err)
969 return err;
970
971 ep->ep_state |= EP_HALTED;
972
973 xhci_ring_cmd_db(xhci);
974
975 return 0;
976}
977
978/*
979 * Fix up the ep ring first, so HW stops executing cancelled TDs.
980 * We have the xHCI lock, so nothing can modify this list until we drop it.
981 * We're also in the event handler, so we can't get re-interrupted if another
982 * Stop Endpoint command completes.
983 *
984 * only call this when ring is not in a running state
985 */
986
987static int xhci_invalidate_cancelled_tds(struct xhci_virt_ep *ep)
988{
989 struct xhci_hcd *xhci;
990 struct xhci_td *td = NULL;
991 struct xhci_td *tmp_td = NULL;
992 struct xhci_td *cached_td = NULL;
993 struct xhci_ring *ring;
994 u64 hw_deq;
995 unsigned int slot_id = ep->vdev->slot_id;
996 int err;
997
998 xhci = ep->xhci;
999
1000 list_for_each_entry_safe(td, tmp_td, &ep->cancelled_td_list, cancelled_td_list) {
1001 xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
1002 "Removing canceled TD starting at 0x%llx (dma) in stream %u URB %p",
1003 (unsigned long long)xhci_trb_virt_to_dma(
1004 td->start_seg, td->first_trb),
1005 td->urb->stream_id, td->urb);
1006 list_del_init(&td->td_list);
1007 ring = xhci_urb_to_transfer_ring(xhci, td->urb);
1008 if (!ring) {
1009 xhci_warn(xhci, "WARN Cancelled URB %p has invalid stream ID %u.\n",
1010 td->urb, td->urb->stream_id);
1011 continue;
1012 }
1013 /*
1014 * If a ring stopped on the TD we need to cancel then we have to
1015 * move the xHC endpoint ring dequeue pointer past this TD.
1016 * Rings halted due to STALL may show hw_deq is past the stalled
1017 * TD, but still require a set TR Deq command to flush xHC cache.
1018 */
1019 hw_deq = xhci_get_hw_deq(xhci, ep->vdev, ep->ep_index,
1020 td->urb->stream_id);
1021 hw_deq &= ~0xf;
1022
1023 if (td->cancel_status == TD_HALTED ||
1024 trb_in_td(xhci, td->start_seg, td->first_trb, td->last_trb, hw_deq, false)) {
1025 switch (td->cancel_status) {
1026 case TD_CLEARED: /* TD is already no-op */
1027 case TD_CLEARING_CACHE: /* set TR deq command already queued */
1028 break;
1029 case TD_DIRTY: /* TD is cached, clear it */
1030 case TD_HALTED:
1031 td->cancel_status = TD_CLEARING_CACHE;
1032 if (cached_td)
1033 /* FIXME stream case, several stopped rings */
1034 xhci_dbg(xhci,
1035 "Move dq past stream %u URB %p instead of stream %u URB %p\n",
1036 td->urb->stream_id, td->urb,
1037 cached_td->urb->stream_id, cached_td->urb);
1038 cached_td = td;
1039 break;
1040 }
1041 } else {
1042 td_to_noop(xhci, ring, td, false);
1043 td->cancel_status = TD_CLEARED;
1044 }
1045 }
1046
1047 /* If there's no need to move the dequeue pointer then we're done */
1048 if (!cached_td)
1049 return 0;
1050
1051 err = xhci_move_dequeue_past_td(xhci, slot_id, ep->ep_index,
1052 cached_td->urb->stream_id,
1053 cached_td);
1054 if (err) {
1055 /* Failed to move past cached td, just set cached TDs to no-op */
1056 list_for_each_entry_safe(td, tmp_td, &ep->cancelled_td_list, cancelled_td_list) {
1057 if (td->cancel_status != TD_CLEARING_CACHE)
1058 continue;
1059 xhci_dbg(xhci, "Failed to clear cancelled cached URB %p, mark clear anyway\n",
1060 td->urb);
1061 td_to_noop(xhci, ring, td, false);
1062 td->cancel_status = TD_CLEARED;
1063 }
1064 }
1065 return 0;
1066}
1067
1068/*
1069 * Returns the TD the endpoint ring halted on.
1070 * Only call for non-running rings without streams.
1071 */
1072static struct xhci_td *find_halted_td(struct xhci_virt_ep *ep)
1073{
1074 struct xhci_td *td;
1075 u64 hw_deq;
1076
1077 if (!list_empty(&ep->ring->td_list)) { /* Not streams compatible */
1078 hw_deq = xhci_get_hw_deq(ep->xhci, ep->vdev, ep->ep_index, 0);
1079 hw_deq &= ~0xf;
1080 td = list_first_entry(&ep->ring->td_list, struct xhci_td, td_list);
1081 if (trb_in_td(ep->xhci, td->start_seg, td->first_trb,
1082 td->last_trb, hw_deq, false))
1083 return td;
1084 }
1085 return NULL;
1086}
1087
1088/*
1089 * When we get a command completion for a Stop Endpoint Command, we need to
1090 * unlink any cancelled TDs from the ring. There are two ways to do that:
1091 *
1092 * 1. If the HW was in the middle of processing the TD that needs to be
1093 * cancelled, then we must move the ring's dequeue pointer past the last TRB
1094 * in the TD with a Set Dequeue Pointer Command.
1095 * 2. Otherwise, we turn all the TRBs in the TD into No-op TRBs (with the chain
1096 * bit cleared) so that the HW will skip over them.
1097 */
1098static void xhci_handle_cmd_stop_ep(struct xhci_hcd *xhci, int slot_id,
1099 union xhci_trb *trb, u32 comp_code)
1100{
1101 unsigned int ep_index;
1102 struct xhci_virt_ep *ep;
1103 struct xhci_ep_ctx *ep_ctx;
1104 struct xhci_td *td = NULL;
1105 enum xhci_ep_reset_type reset_type;
1106 struct xhci_command *command;
1107 int err;
1108
1109 if (unlikely(TRB_TO_SUSPEND_PORT(le32_to_cpu(trb->generic.field[3])))) {
1110 if (!xhci->devs[slot_id])
1111 xhci_warn(xhci, "Stop endpoint command completion for disabled slot %u\n",
1112 slot_id);
1113 return;
1114 }
1115
1116 ep_index = TRB_TO_EP_INDEX(le32_to_cpu(trb->generic.field[3]));
1117 ep = xhci_get_virt_ep(xhci, slot_id, ep_index);
1118 if (!ep)
1119 return;
1120
1121 ep_ctx = xhci_get_ep_ctx(xhci, ep->vdev->out_ctx, ep_index);
1122
1123 trace_xhci_handle_cmd_stop_ep(ep_ctx);
1124
1125 if (comp_code == COMP_CONTEXT_STATE_ERROR) {
1126 /*
1127 * If stop endpoint command raced with a halting endpoint we need to
1128 * reset the host side endpoint first.
1129 * If the TD we halted on isn't cancelled the TD should be given back
1130 * with a proper error code, and the ring dequeue moved past the TD.
1131 * If streams case we can't find hw_deq, or the TD we halted on so do a
1132 * soft reset.
1133 *
1134 * Proper error code is unknown here, it would be -EPIPE if device side
1135 * of enadpoit halted (aka STALL), and -EPROTO if not (transaction error)
1136 * We use -EPROTO, if device is stalled it should return a stall error on
1137 * next transfer, which then will return -EPIPE, and device side stall is
1138 * noted and cleared by class driver.
1139 */
1140 switch (GET_EP_CTX_STATE(ep_ctx)) {
1141 case EP_STATE_HALTED:
1142 xhci_dbg(xhci, "Stop ep completion raced with stall, reset ep\n");
1143 if (ep->ep_state & EP_HAS_STREAMS) {
1144 reset_type = EP_SOFT_RESET;
1145 } else {
1146 reset_type = EP_HARD_RESET;
1147 td = find_halted_td(ep);
1148 if (td)
1149 td->status = -EPROTO;
1150 }
1151 /* reset ep, reset handler cleans up cancelled tds */
1152 err = xhci_handle_halted_endpoint(xhci, ep, td, reset_type);
1153 if (err)
1154 break;
1155 ep->ep_state &= ~EP_STOP_CMD_PENDING;
1156 return;
1157 case EP_STATE_RUNNING:
1158 /* Race, HW handled stop ep cmd before ep was running */
1159 xhci_dbg(xhci, "Stop ep completion ctx error, ep is running\n");
1160
1161 command = xhci_alloc_command(xhci, false, GFP_ATOMIC);
1162 if (!command) {
1163 ep->ep_state &= ~EP_STOP_CMD_PENDING;
1164 return;
1165 }
1166 xhci_queue_stop_endpoint(xhci, command, slot_id, ep_index, 0);
1167 xhci_ring_cmd_db(xhci);
1168
1169 return;
1170 default:
1171 break;
1172 }
1173 }
1174
1175 /* will queue a set TR deq if stopped on a cancelled, uncleared TD */
1176 xhci_invalidate_cancelled_tds(ep);
1177 ep->ep_state &= ~EP_STOP_CMD_PENDING;
1178
1179 /* Otherwise ring the doorbell(s) to restart queued transfers */
1180 xhci_giveback_invalidated_tds(ep);
1181 ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
1182}
1183
1184static void xhci_kill_ring_urbs(struct xhci_hcd *xhci, struct xhci_ring *ring)
1185{
1186 struct xhci_td *cur_td;
1187 struct xhci_td *tmp;
1188
1189 list_for_each_entry_safe(cur_td, tmp, &ring->td_list, td_list) {
1190 list_del_init(&cur_td->td_list);
1191
1192 if (!list_empty(&cur_td->cancelled_td_list))
1193 list_del_init(&cur_td->cancelled_td_list);
1194
1195 xhci_unmap_td_bounce_buffer(xhci, ring, cur_td);
1196
1197 inc_td_cnt(cur_td->urb);
1198 if (last_td_in_urb(cur_td))
1199 xhci_giveback_urb_in_irq(xhci, cur_td, -ESHUTDOWN);
1200 }
1201}
1202
1203static void xhci_kill_endpoint_urbs(struct xhci_hcd *xhci,
1204 int slot_id, int ep_index)
1205{
1206 struct xhci_td *cur_td;
1207 struct xhci_td *tmp;
1208 struct xhci_virt_ep *ep;
1209 struct xhci_ring *ring;
1210
1211 ep = xhci_get_virt_ep(xhci, slot_id, ep_index);
1212 if (!ep)
1213 return;
1214
1215 if ((ep->ep_state & EP_HAS_STREAMS) ||
1216 (ep->ep_state & EP_GETTING_NO_STREAMS)) {
1217 int stream_id;
1218
1219 for (stream_id = 1; stream_id < ep->stream_info->num_streams;
1220 stream_id++) {
1221 ring = ep->stream_info->stream_rings[stream_id];
1222 if (!ring)
1223 continue;
1224
1225 xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
1226 "Killing URBs for slot ID %u, ep index %u, stream %u",
1227 slot_id, ep_index, stream_id);
1228 xhci_kill_ring_urbs(xhci, ring);
1229 }
1230 } else {
1231 ring = ep->ring;
1232 if (!ring)
1233 return;
1234 xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
1235 "Killing URBs for slot ID %u, ep index %u",
1236 slot_id, ep_index);
1237 xhci_kill_ring_urbs(xhci, ring);
1238 }
1239
1240 list_for_each_entry_safe(cur_td, tmp, &ep->cancelled_td_list,
1241 cancelled_td_list) {
1242 list_del_init(&cur_td->cancelled_td_list);
1243 inc_td_cnt(cur_td->urb);
1244
1245 if (last_td_in_urb(cur_td))
1246 xhci_giveback_urb_in_irq(xhci, cur_td, -ESHUTDOWN);
1247 }
1248}
1249
1250/*
1251 * host controller died, register read returns 0xffffffff
1252 * Complete pending commands, mark them ABORTED.
1253 * URBs need to be given back as usb core might be waiting with device locks
1254 * held for the URBs to finish during device disconnect, blocking host remove.
1255 *
1256 * Call with xhci->lock held.
1257 * lock is relased and re-acquired while giving back urb.
1258 */
1259void xhci_hc_died(struct xhci_hcd *xhci)
1260{
1261 int i, j;
1262
1263 if (xhci->xhc_state & XHCI_STATE_DYING)
1264 return;
1265
1266 xhci_err(xhci, "xHCI host controller not responding, assume dead\n");
1267 xhci->xhc_state |= XHCI_STATE_DYING;
1268
1269 xhci_cleanup_command_queue(xhci);
1270
1271 /* return any pending urbs, remove may be waiting for them */
1272 for (i = 0; i <= HCS_MAX_SLOTS(xhci->hcs_params1); i++) {
1273 if (!xhci->devs[i])
1274 continue;
1275 for (j = 0; j < 31; j++)
1276 xhci_kill_endpoint_urbs(xhci, i, j);
1277 }
1278
1279 /* inform usb core hc died if PCI remove isn't already handling it */
1280 if (!(xhci->xhc_state & XHCI_STATE_REMOVING))
1281 usb_hc_died(xhci_to_hcd(xhci));
1282}
1283
1284static void update_ring_for_set_deq_completion(struct xhci_hcd *xhci,
1285 struct xhci_virt_device *dev,
1286 struct xhci_ring *ep_ring,
1287 unsigned int ep_index)
1288{
1289 union xhci_trb *dequeue_temp;
1290
1291 dequeue_temp = ep_ring->dequeue;
1292
1293 /* If we get two back-to-back stalls, and the first stalled transfer
1294 * ends just before a link TRB, the dequeue pointer will be left on
1295 * the link TRB by the code in the while loop. So we have to update
1296 * the dequeue pointer one segment further, or we'll jump off
1297 * the segment into la-la-land.
1298 */
1299 if (trb_is_link(ep_ring->dequeue)) {
1300 ep_ring->deq_seg = ep_ring->deq_seg->next;
1301 ep_ring->dequeue = ep_ring->deq_seg->trbs;
1302 }
1303
1304 while (ep_ring->dequeue != dev->eps[ep_index].queued_deq_ptr) {
1305 /* We have more usable TRBs */
1306 ep_ring->dequeue++;
1307 if (trb_is_link(ep_ring->dequeue)) {
1308 if (ep_ring->dequeue ==
1309 dev->eps[ep_index].queued_deq_ptr)
1310 break;
1311 ep_ring->deq_seg = ep_ring->deq_seg->next;
1312 ep_ring->dequeue = ep_ring->deq_seg->trbs;
1313 }
1314 if (ep_ring->dequeue == dequeue_temp) {
1315 xhci_dbg(xhci, "Unable to find new dequeue pointer\n");
1316 break;
1317 }
1318 }
1319}
1320
1321/*
1322 * When we get a completion for a Set Transfer Ring Dequeue Pointer command,
1323 * we need to clear the set deq pending flag in the endpoint ring state, so that
1324 * the TD queueing code can ring the doorbell again. We also need to ring the
1325 * endpoint doorbell to restart the ring, but only if there aren't more
1326 * cancellations pending.
1327 */
1328static void xhci_handle_cmd_set_deq(struct xhci_hcd *xhci, int slot_id,
1329 union xhci_trb *trb, u32 cmd_comp_code)
1330{
1331 unsigned int ep_index;
1332 unsigned int stream_id;
1333 struct xhci_ring *ep_ring;
1334 struct xhci_virt_ep *ep;
1335 struct xhci_ep_ctx *ep_ctx;
1336 struct xhci_slot_ctx *slot_ctx;
1337 struct xhci_td *td, *tmp_td;
1338
1339 ep_index = TRB_TO_EP_INDEX(le32_to_cpu(trb->generic.field[3]));
1340 stream_id = TRB_TO_STREAM_ID(le32_to_cpu(trb->generic.field[2]));
1341 ep = xhci_get_virt_ep(xhci, slot_id, ep_index);
1342 if (!ep)
1343 return;
1344
1345 ep_ring = xhci_virt_ep_to_ring(xhci, ep, stream_id);
1346 if (!ep_ring) {
1347 xhci_warn(xhci, "WARN Set TR deq ptr command for freed stream ID %u\n",
1348 stream_id);
1349 /* XXX: Harmless??? */
1350 goto cleanup;
1351 }
1352
1353 ep_ctx = xhci_get_ep_ctx(xhci, ep->vdev->out_ctx, ep_index);
1354 slot_ctx = xhci_get_slot_ctx(xhci, ep->vdev->out_ctx);
1355 trace_xhci_handle_cmd_set_deq(slot_ctx);
1356 trace_xhci_handle_cmd_set_deq_ep(ep_ctx);
1357
1358 if (cmd_comp_code != COMP_SUCCESS) {
1359 unsigned int ep_state;
1360 unsigned int slot_state;
1361
1362 switch (cmd_comp_code) {
1363 case COMP_TRB_ERROR:
1364 xhci_warn(xhci, "WARN Set TR Deq Ptr cmd invalid because of stream ID configuration\n");
1365 break;
1366 case COMP_CONTEXT_STATE_ERROR:
1367 xhci_warn(xhci, "WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.\n");
1368 ep_state = GET_EP_CTX_STATE(ep_ctx);
1369 slot_state = le32_to_cpu(slot_ctx->dev_state);
1370 slot_state = GET_SLOT_STATE(slot_state);
1371 xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
1372 "Slot state = %u, EP state = %u",
1373 slot_state, ep_state);
1374 break;
1375 case COMP_SLOT_NOT_ENABLED_ERROR:
1376 xhci_warn(xhci, "WARN Set TR Deq Ptr cmd failed because slot %u was not enabled.\n",
1377 slot_id);
1378 break;
1379 default:
1380 xhci_warn(xhci, "WARN Set TR Deq Ptr cmd with unknown completion code of %u.\n",
1381 cmd_comp_code);
1382 break;
1383 }
1384 /* OK what do we do now? The endpoint state is hosed, and we
1385 * should never get to this point if the synchronization between
1386 * queueing, and endpoint state are correct. This might happen
1387 * if the device gets disconnected after we've finished
1388 * cancelling URBs, which might not be an error...
1389 */
1390 } else {
1391 u64 deq;
1392 /* 4.6.10 deq ptr is written to the stream ctx for streams */
1393 if (ep->ep_state & EP_HAS_STREAMS) {
1394 struct xhci_stream_ctx *ctx =
1395 &ep->stream_info->stream_ctx_array[stream_id];
1396 deq = le64_to_cpu(ctx->stream_ring) & SCTX_DEQ_MASK;
1397 } else {
1398 deq = le64_to_cpu(ep_ctx->deq) & ~EP_CTX_CYCLE_MASK;
1399 }
1400 xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
1401 "Successful Set TR Deq Ptr cmd, deq = @%08llx", deq);
1402 if (xhci_trb_virt_to_dma(ep->queued_deq_seg,
1403 ep->queued_deq_ptr) == deq) {
1404 /* Update the ring's dequeue segment and dequeue pointer
1405 * to reflect the new position.
1406 */
1407 update_ring_for_set_deq_completion(xhci, ep->vdev,
1408 ep_ring, ep_index);
1409 } else {
1410 xhci_warn(xhci, "Mismatch between completed Set TR Deq Ptr command & xHCI internal state.\n");
1411 xhci_warn(xhci, "ep deq seg = %p, deq ptr = %p\n",
1412 ep->queued_deq_seg, ep->queued_deq_ptr);
1413 }
1414 }
1415 /* HW cached TDs cleared from cache, give them back */
1416 list_for_each_entry_safe(td, tmp_td, &ep->cancelled_td_list,
1417 cancelled_td_list) {
1418 ep_ring = xhci_urb_to_transfer_ring(ep->xhci, td->urb);
1419 if (td->cancel_status == TD_CLEARING_CACHE) {
1420 td->cancel_status = TD_CLEARED;
1421 xhci_dbg(ep->xhci, "%s: Giveback cancelled URB %p TD\n",
1422 __func__, td->urb);
1423 xhci_td_cleanup(ep->xhci, td, ep_ring, td->status);
1424 } else {
1425 xhci_dbg(ep->xhci, "%s: Keep cancelled URB %p TD as cancel_status is %d\n",
1426 __func__, td->urb, td->cancel_status);
1427 }
1428 }
1429cleanup:
1430 ep->ep_state &= ~SET_DEQ_PENDING;
1431 ep->queued_deq_seg = NULL;
1432 ep->queued_deq_ptr = NULL;
1433 /* Restart any rings with pending URBs */
1434 ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
1435}
1436
1437static void xhci_handle_cmd_reset_ep(struct xhci_hcd *xhci, int slot_id,
1438 union xhci_trb *trb, u32 cmd_comp_code)
1439{
1440 struct xhci_virt_ep *ep;
1441 struct xhci_ep_ctx *ep_ctx;
1442 unsigned int ep_index;
1443
1444 ep_index = TRB_TO_EP_INDEX(le32_to_cpu(trb->generic.field[3]));
1445 ep = xhci_get_virt_ep(xhci, slot_id, ep_index);
1446 if (!ep)
1447 return;
1448
1449 ep_ctx = xhci_get_ep_ctx(xhci, ep->vdev->out_ctx, ep_index);
1450 trace_xhci_handle_cmd_reset_ep(ep_ctx);
1451
1452 /* This command will only fail if the endpoint wasn't halted,
1453 * but we don't care.
1454 */
1455 xhci_dbg_trace(xhci, trace_xhci_dbg_reset_ep,
1456 "Ignoring reset ep completion code of %u", cmd_comp_code);
1457
1458 /* Cleanup cancelled TDs as ep is stopped. May queue a Set TR Deq cmd */
1459 xhci_invalidate_cancelled_tds(ep);
1460
1461 /* Clear our internal halted state */
1462 ep->ep_state &= ~EP_HALTED;
1463
1464 xhci_giveback_invalidated_tds(ep);
1465
1466 /* if this was a soft reset, then restart */
1467 if ((le32_to_cpu(trb->generic.field[3])) & TRB_TSP)
1468 ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
1469}
1470
1471static void xhci_handle_cmd_enable_slot(struct xhci_hcd *xhci, int slot_id,
1472 struct xhci_command *command, u32 cmd_comp_code)
1473{
1474 if (cmd_comp_code == COMP_SUCCESS)
1475 command->slot_id = slot_id;
1476 else
1477 command->slot_id = 0;
1478}
1479
1480static void xhci_handle_cmd_disable_slot(struct xhci_hcd *xhci, int slot_id)
1481{
1482 struct xhci_virt_device *virt_dev;
1483 struct xhci_slot_ctx *slot_ctx;
1484
1485 virt_dev = xhci->devs[slot_id];
1486 if (!virt_dev)
1487 return;
1488
1489 slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->out_ctx);
1490 trace_xhci_handle_cmd_disable_slot(slot_ctx);
1491
1492 if (xhci->quirks & XHCI_EP_LIMIT_QUIRK)
1493 /* Delete default control endpoint resources */
1494 xhci_free_device_endpoint_resources(xhci, virt_dev, true);
1495}
1496
1497static void xhci_handle_cmd_config_ep(struct xhci_hcd *xhci, int slot_id,
1498 u32 cmd_comp_code)
1499{
1500 struct xhci_virt_device *virt_dev;
1501 struct xhci_input_control_ctx *ctrl_ctx;
1502 struct xhci_ep_ctx *ep_ctx;
1503 unsigned int ep_index;
1504 u32 add_flags;
1505
1506 /*
1507 * Configure endpoint commands can come from the USB core configuration
1508 * or alt setting changes, or when streams were being configured.
1509 */
1510
1511 virt_dev = xhci->devs[slot_id];
1512 if (!virt_dev)
1513 return;
1514 ctrl_ctx = xhci_get_input_control_ctx(virt_dev->in_ctx);
1515 if (!ctrl_ctx) {
1516 xhci_warn(xhci, "Could not get input context, bad type.\n");
1517 return;
1518 }
1519
1520 add_flags = le32_to_cpu(ctrl_ctx->add_flags);
1521
1522 /* Input ctx add_flags are the endpoint index plus one */
1523 ep_index = xhci_last_valid_endpoint(add_flags) - 1;
1524
1525 ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->out_ctx, ep_index);
1526 trace_xhci_handle_cmd_config_ep(ep_ctx);
1527
1528 return;
1529}
1530
1531static void xhci_handle_cmd_addr_dev(struct xhci_hcd *xhci, int slot_id)
1532{
1533 struct xhci_virt_device *vdev;
1534 struct xhci_slot_ctx *slot_ctx;
1535
1536 vdev = xhci->devs[slot_id];
1537 if (!vdev)
1538 return;
1539 slot_ctx = xhci_get_slot_ctx(xhci, vdev->out_ctx);
1540 trace_xhci_handle_cmd_addr_dev(slot_ctx);
1541}
1542
1543static void xhci_handle_cmd_reset_dev(struct xhci_hcd *xhci, int slot_id)
1544{
1545 struct xhci_virt_device *vdev;
1546 struct xhci_slot_ctx *slot_ctx;
1547
1548 vdev = xhci->devs[slot_id];
1549 if (!vdev) {
1550 xhci_warn(xhci, "Reset device command completion for disabled slot %u\n",
1551 slot_id);
1552 return;
1553 }
1554 slot_ctx = xhci_get_slot_ctx(xhci, vdev->out_ctx);
1555 trace_xhci_handle_cmd_reset_dev(slot_ctx);
1556
1557 xhci_dbg(xhci, "Completed reset device command.\n");
1558}
1559
1560static void xhci_handle_cmd_nec_get_fw(struct xhci_hcd *xhci,
1561 struct xhci_event_cmd *event)
1562{
1563 if (!(xhci->quirks & XHCI_NEC_HOST)) {
1564 xhci_warn(xhci, "WARN NEC_GET_FW command on non-NEC host\n");
1565 return;
1566 }
1567 xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
1568 "NEC firmware version %2x.%02x",
1569 NEC_FW_MAJOR(le32_to_cpu(event->status)),
1570 NEC_FW_MINOR(le32_to_cpu(event->status)));
1571}
1572
1573static void xhci_complete_del_and_free_cmd(struct xhci_command *cmd, u32 status)
1574{
1575 list_del(&cmd->cmd_list);
1576
1577 if (cmd->completion) {
1578 cmd->status = status;
1579 complete(cmd->completion);
1580 } else {
1581 kfree(cmd);
1582 }
1583}
1584
1585void xhci_cleanup_command_queue(struct xhci_hcd *xhci)
1586{
1587 struct xhci_command *cur_cmd, *tmp_cmd;
1588 xhci->current_cmd = NULL;
1589 list_for_each_entry_safe(cur_cmd, tmp_cmd, &xhci->cmd_list, cmd_list)
1590 xhci_complete_del_and_free_cmd(cur_cmd, COMP_COMMAND_ABORTED);
1591}
1592
1593void xhci_handle_command_timeout(struct work_struct *work)
1594{
1595 struct xhci_hcd *xhci;
1596 unsigned long flags;
1597 char str[XHCI_MSG_MAX];
1598 u64 hw_ring_state;
1599 u32 cmd_field3;
1600 u32 usbsts;
1601
1602 xhci = container_of(to_delayed_work(work), struct xhci_hcd, cmd_timer);
1603
1604 spin_lock_irqsave(&xhci->lock, flags);
1605
1606 /*
1607 * If timeout work is pending, or current_cmd is NULL, it means we
1608 * raced with command completion. Command is handled so just return.
1609 */
1610 if (!xhci->current_cmd || delayed_work_pending(&xhci->cmd_timer)) {
1611 spin_unlock_irqrestore(&xhci->lock, flags);
1612 return;
1613 }
1614
1615 cmd_field3 = le32_to_cpu(xhci->current_cmd->command_trb->generic.field[3]);
1616 usbsts = readl(&xhci->op_regs->status);
1617 xhci_dbg(xhci, "Command timeout, USBSTS:%s\n", xhci_decode_usbsts(str, usbsts));
1618
1619 /* Bail out and tear down xhci if a stop endpoint command failed */
1620 if (TRB_FIELD_TO_TYPE(cmd_field3) == TRB_STOP_RING) {
1621 struct xhci_virt_ep *ep;
1622
1623 xhci_warn(xhci, "xHCI host not responding to stop endpoint command\n");
1624
1625 ep = xhci_get_virt_ep(xhci, TRB_TO_SLOT_ID(cmd_field3),
1626 TRB_TO_EP_INDEX(cmd_field3));
1627 if (ep)
1628 ep->ep_state &= ~EP_STOP_CMD_PENDING;
1629
1630 xhci_halt(xhci);
1631 xhci_hc_died(xhci);
1632 goto time_out_completed;
1633 }
1634
1635 /* mark this command to be cancelled */
1636 xhci->current_cmd->status = COMP_COMMAND_ABORTED;
1637
1638 /* Make sure command ring is running before aborting it */
1639 hw_ring_state = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
1640 if (hw_ring_state == ~(u64)0) {
1641 xhci_hc_died(xhci);
1642 goto time_out_completed;
1643 }
1644
1645 if ((xhci->cmd_ring_state & CMD_RING_STATE_RUNNING) &&
1646 (hw_ring_state & CMD_RING_RUNNING)) {
1647 /* Prevent new doorbell, and start command abort */
1648 xhci->cmd_ring_state = CMD_RING_STATE_ABORTED;
1649 xhci_dbg(xhci, "Command timeout\n");
1650 xhci_abort_cmd_ring(xhci, flags);
1651 goto time_out_completed;
1652 }
1653
1654 /* host removed. Bail out */
1655 if (xhci->xhc_state & XHCI_STATE_REMOVING) {
1656 xhci_dbg(xhci, "host removed, ring start fail?\n");
1657 xhci_cleanup_command_queue(xhci);
1658
1659 goto time_out_completed;
1660 }
1661
1662 /* command timeout on stopped ring, ring can't be aborted */
1663 xhci_dbg(xhci, "Command timeout on stopped ring\n");
1664 xhci_handle_stopped_cmd_ring(xhci, xhci->current_cmd);
1665
1666time_out_completed:
1667 spin_unlock_irqrestore(&xhci->lock, flags);
1668 return;
1669}
1670
1671static void handle_cmd_completion(struct xhci_hcd *xhci,
1672 struct xhci_event_cmd *event)
1673{
1674 unsigned int slot_id = TRB_TO_SLOT_ID(le32_to_cpu(event->flags));
1675 u64 cmd_dma;
1676 dma_addr_t cmd_dequeue_dma;
1677 u32 cmd_comp_code;
1678 union xhci_trb *cmd_trb;
1679 struct xhci_command *cmd;
1680 u32 cmd_type;
1681
1682 if (slot_id >= MAX_HC_SLOTS) {
1683 xhci_warn(xhci, "Invalid slot_id %u\n", slot_id);
1684 return;
1685 }
1686
1687 cmd_dma = le64_to_cpu(event->cmd_trb);
1688 cmd_trb = xhci->cmd_ring->dequeue;
1689
1690 trace_xhci_handle_command(xhci->cmd_ring, &cmd_trb->generic);
1691
1692 cmd_dequeue_dma = xhci_trb_virt_to_dma(xhci->cmd_ring->deq_seg,
1693 cmd_trb);
1694 /*
1695 * Check whether the completion event is for our internal kept
1696 * command.
1697 */
1698 if (!cmd_dequeue_dma || cmd_dma != (u64)cmd_dequeue_dma) {
1699 xhci_warn(xhci,
1700 "ERROR mismatched command completion event\n");
1701 return;
1702 }
1703
1704 cmd = list_first_entry(&xhci->cmd_list, struct xhci_command, cmd_list);
1705
1706 cancel_delayed_work(&xhci->cmd_timer);
1707
1708 cmd_comp_code = GET_COMP_CODE(le32_to_cpu(event->status));
1709
1710 /* If CMD ring stopped we own the trbs between enqueue and dequeue */
1711 if (cmd_comp_code == COMP_COMMAND_RING_STOPPED) {
1712 complete_all(&xhci->cmd_ring_stop_completion);
1713 return;
1714 }
1715
1716 if (cmd->command_trb != xhci->cmd_ring->dequeue) {
1717 xhci_err(xhci,
1718 "Command completion event does not match command\n");
1719 return;
1720 }
1721
1722 /*
1723 * Host aborted the command ring, check if the current command was
1724 * supposed to be aborted, otherwise continue normally.
1725 * The command ring is stopped now, but the xHC will issue a Command
1726 * Ring Stopped event which will cause us to restart it.
1727 */
1728 if (cmd_comp_code == COMP_COMMAND_ABORTED) {
1729 xhci->cmd_ring_state = CMD_RING_STATE_STOPPED;
1730 if (cmd->status == COMP_COMMAND_ABORTED) {
1731 if (xhci->current_cmd == cmd)
1732 xhci->current_cmd = NULL;
1733 goto event_handled;
1734 }
1735 }
1736
1737 cmd_type = TRB_FIELD_TO_TYPE(le32_to_cpu(cmd_trb->generic.field[3]));
1738 switch (cmd_type) {
1739 case TRB_ENABLE_SLOT:
1740 xhci_handle_cmd_enable_slot(xhci, slot_id, cmd, cmd_comp_code);
1741 break;
1742 case TRB_DISABLE_SLOT:
1743 xhci_handle_cmd_disable_slot(xhci, slot_id);
1744 break;
1745 case TRB_CONFIG_EP:
1746 if (!cmd->completion)
1747 xhci_handle_cmd_config_ep(xhci, slot_id, cmd_comp_code);
1748 break;
1749 case TRB_EVAL_CONTEXT:
1750 break;
1751 case TRB_ADDR_DEV:
1752 xhci_handle_cmd_addr_dev(xhci, slot_id);
1753 break;
1754 case TRB_STOP_RING:
1755 WARN_ON(slot_id != TRB_TO_SLOT_ID(
1756 le32_to_cpu(cmd_trb->generic.field[3])));
1757 if (!cmd->completion)
1758 xhci_handle_cmd_stop_ep(xhci, slot_id, cmd_trb,
1759 cmd_comp_code);
1760 break;
1761 case TRB_SET_DEQ:
1762 WARN_ON(slot_id != TRB_TO_SLOT_ID(
1763 le32_to_cpu(cmd_trb->generic.field[3])));
1764 xhci_handle_cmd_set_deq(xhci, slot_id, cmd_trb, cmd_comp_code);
1765 break;
1766 case TRB_CMD_NOOP:
1767 /* Is this an aborted command turned to NO-OP? */
1768 if (cmd->status == COMP_COMMAND_RING_STOPPED)
1769 cmd_comp_code = COMP_COMMAND_RING_STOPPED;
1770 break;
1771 case TRB_RESET_EP:
1772 WARN_ON(slot_id != TRB_TO_SLOT_ID(
1773 le32_to_cpu(cmd_trb->generic.field[3])));
1774 xhci_handle_cmd_reset_ep(xhci, slot_id, cmd_trb, cmd_comp_code);
1775 break;
1776 case TRB_RESET_DEV:
1777 /* SLOT_ID field in reset device cmd completion event TRB is 0.
1778 * Use the SLOT_ID from the command TRB instead (xhci 4.6.11)
1779 */
1780 slot_id = TRB_TO_SLOT_ID(
1781 le32_to_cpu(cmd_trb->generic.field[3]));
1782 xhci_handle_cmd_reset_dev(xhci, slot_id);
1783 break;
1784 case TRB_NEC_GET_FW:
1785 xhci_handle_cmd_nec_get_fw(xhci, event);
1786 break;
1787 default:
1788 /* Skip over unknown commands on the event ring */
1789 xhci_info(xhci, "INFO unknown command type %d\n", cmd_type);
1790 break;
1791 }
1792
1793 /* restart timer if this wasn't the last command */
1794 if (!list_is_singular(&xhci->cmd_list)) {
1795 xhci->current_cmd = list_first_entry(&cmd->cmd_list,
1796 struct xhci_command, cmd_list);
1797 xhci_mod_cmd_timer(xhci);
1798 } else if (xhci->current_cmd == cmd) {
1799 xhci->current_cmd = NULL;
1800 }
1801
1802event_handled:
1803 xhci_complete_del_and_free_cmd(cmd, cmd_comp_code);
1804
1805 inc_deq(xhci, xhci->cmd_ring);
1806}
1807
1808static void handle_vendor_event(struct xhci_hcd *xhci,
1809 union xhci_trb *event, u32 trb_type)
1810{
1811 xhci_dbg(xhci, "Vendor specific event TRB type = %u\n", trb_type);
1812 if (trb_type == TRB_NEC_CMD_COMP && (xhci->quirks & XHCI_NEC_HOST))
1813 handle_cmd_completion(xhci, &event->event_cmd);
1814}
1815
1816static void handle_device_notification(struct xhci_hcd *xhci,
1817 union xhci_trb *event)
1818{
1819 u32 slot_id;
1820 struct usb_device *udev;
1821
1822 slot_id = TRB_TO_SLOT_ID(le32_to_cpu(event->generic.field[3]));
1823 if (!xhci->devs[slot_id]) {
1824 xhci_warn(xhci, "Device Notification event for "
1825 "unused slot %u\n", slot_id);
1826 return;
1827 }
1828
1829 xhci_dbg(xhci, "Device Wake Notification event for slot ID %u\n",
1830 slot_id);
1831 udev = xhci->devs[slot_id]->udev;
1832 if (udev && udev->parent)
1833 usb_wakeup_notification(udev->parent, udev->portnum);
1834}
1835
1836/*
1837 * Quirk hanlder for errata seen on Cavium ThunderX2 processor XHCI
1838 * Controller.
1839 * As per ThunderX2errata-129 USB 2 device may come up as USB 1
1840 * If a connection to a USB 1 device is followed by another connection
1841 * to a USB 2 device.
1842 *
1843 * Reset the PHY after the USB device is disconnected if device speed
1844 * is less than HCD_USB3.
1845 * Retry the reset sequence max of 4 times checking the PLL lock status.
1846 *
1847 */
1848static void xhci_cavium_reset_phy_quirk(struct xhci_hcd *xhci)
1849{
1850 struct usb_hcd *hcd = xhci_to_hcd(xhci);
1851 u32 pll_lock_check;
1852 u32 retry_count = 4;
1853
1854 do {
1855 /* Assert PHY reset */
1856 writel(0x6F, hcd->regs + 0x1048);
1857 udelay(10);
1858 /* De-assert the PHY reset */
1859 writel(0x7F, hcd->regs + 0x1048);
1860 udelay(200);
1861 pll_lock_check = readl(hcd->regs + 0x1070);
1862 } while (!(pll_lock_check & 0x1) && --retry_count);
1863}
1864
1865static void handle_port_status(struct xhci_hcd *xhci,
1866 struct xhci_interrupter *ir,
1867 union xhci_trb *event)
1868{
1869 struct usb_hcd *hcd;
1870 u32 port_id;
1871 u32 portsc, cmd_reg;
1872 int max_ports;
1873 int slot_id;
1874 unsigned int hcd_portnum;
1875 struct xhci_bus_state *bus_state;
1876 bool bogus_port_status = false;
1877 struct xhci_port *port;
1878
1879 /* Port status change events always have a successful completion code */
1880 if (GET_COMP_CODE(le32_to_cpu(event->generic.field[2])) != COMP_SUCCESS)
1881 xhci_warn(xhci,
1882 "WARN: xHC returned failed port status event\n");
1883
1884 port_id = GET_PORT_ID(le32_to_cpu(event->generic.field[0]));
1885 max_ports = HCS_MAX_PORTS(xhci->hcs_params1);
1886
1887 if ((port_id <= 0) || (port_id > max_ports)) {
1888 xhci_warn(xhci, "Port change event with invalid port ID %d\n",
1889 port_id);
1890 return;
1891 }
1892
1893 port = &xhci->hw_ports[port_id - 1];
1894 if (!port || !port->rhub || port->hcd_portnum == DUPLICATE_ENTRY) {
1895 xhci_warn(xhci, "Port change event, no port for port ID %u\n",
1896 port_id);
1897 bogus_port_status = true;
1898 goto cleanup;
1899 }
1900
1901 /* We might get interrupts after shared_hcd is removed */
1902 if (port->rhub == &xhci->usb3_rhub && xhci->shared_hcd == NULL) {
1903 xhci_dbg(xhci, "ignore port event for removed USB3 hcd\n");
1904 bogus_port_status = true;
1905 goto cleanup;
1906 }
1907
1908 hcd = port->rhub->hcd;
1909 bus_state = &port->rhub->bus_state;
1910 hcd_portnum = port->hcd_portnum;
1911 portsc = readl(port->addr);
1912
1913 xhci_dbg(xhci, "Port change event, %d-%d, id %d, portsc: 0x%x\n",
1914 hcd->self.busnum, hcd_portnum + 1, port_id, portsc);
1915
1916 trace_xhci_handle_port_status(port, portsc);
1917
1918 if (hcd->state == HC_STATE_SUSPENDED) {
1919 xhci_dbg(xhci, "resume root hub\n");
1920 usb_hcd_resume_root_hub(hcd);
1921 }
1922
1923 if (hcd->speed >= HCD_USB3 &&
1924 (portsc & PORT_PLS_MASK) == XDEV_INACTIVE) {
1925 slot_id = xhci_find_slot_id_by_port(hcd, xhci, hcd_portnum + 1);
1926 if (slot_id && xhci->devs[slot_id])
1927 xhci->devs[slot_id]->flags |= VDEV_PORT_ERROR;
1928 }
1929
1930 if ((portsc & PORT_PLC) && (portsc & PORT_PLS_MASK) == XDEV_RESUME) {
1931 xhci_dbg(xhci, "port resume event for port %d\n", port_id);
1932
1933 cmd_reg = readl(&xhci->op_regs->command);
1934 if (!(cmd_reg & CMD_RUN)) {
1935 xhci_warn(xhci, "xHC is not running.\n");
1936 goto cleanup;
1937 }
1938
1939 if (DEV_SUPERSPEED_ANY(portsc)) {
1940 xhci_dbg(xhci, "remote wake SS port %d\n", port_id);
1941 /* Set a flag to say the port signaled remote wakeup,
1942 * so we can tell the difference between the end of
1943 * device and host initiated resume.
1944 */
1945 bus_state->port_remote_wakeup |= 1 << hcd_portnum;
1946 xhci_test_and_clear_bit(xhci, port, PORT_PLC);
1947 usb_hcd_start_port_resume(&hcd->self, hcd_portnum);
1948 xhci_set_link_state(xhci, port, XDEV_U0);
1949 /* Need to wait until the next link state change
1950 * indicates the device is actually in U0.
1951 */
1952 bogus_port_status = true;
1953 goto cleanup;
1954 } else if (!test_bit(hcd_portnum, &bus_state->resuming_ports)) {
1955 xhci_dbg(xhci, "resume HS port %d\n", port_id);
1956 port->resume_timestamp = jiffies +
1957 msecs_to_jiffies(USB_RESUME_TIMEOUT);
1958 set_bit(hcd_portnum, &bus_state->resuming_ports);
1959 /* Do the rest in GetPortStatus after resume time delay.
1960 * Avoid polling roothub status before that so that a
1961 * usb device auto-resume latency around ~40ms.
1962 */
1963 set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
1964 mod_timer(&hcd->rh_timer,
1965 port->resume_timestamp);
1966 usb_hcd_start_port_resume(&hcd->self, hcd_portnum);
1967 bogus_port_status = true;
1968 }
1969 }
1970
1971 if ((portsc & PORT_PLC) &&
1972 DEV_SUPERSPEED_ANY(portsc) &&
1973 ((portsc & PORT_PLS_MASK) == XDEV_U0 ||
1974 (portsc & PORT_PLS_MASK) == XDEV_U1 ||
1975 (portsc & PORT_PLS_MASK) == XDEV_U2)) {
1976 xhci_dbg(xhci, "resume SS port %d finished\n", port_id);
1977 complete(&port->u3exit_done);
1978 /* We've just brought the device into U0/1/2 through either the
1979 * Resume state after a device remote wakeup, or through the
1980 * U3Exit state after a host-initiated resume. If it's a device
1981 * initiated remote wake, don't pass up the link state change,
1982 * so the roothub behavior is consistent with external
1983 * USB 3.0 hub behavior.
1984 */
1985 slot_id = xhci_find_slot_id_by_port(hcd, xhci, hcd_portnum + 1);
1986 if (slot_id && xhci->devs[slot_id])
1987 xhci_ring_device(xhci, slot_id);
1988 if (bus_state->port_remote_wakeup & (1 << hcd_portnum)) {
1989 xhci_test_and_clear_bit(xhci, port, PORT_PLC);
1990 usb_wakeup_notification(hcd->self.root_hub,
1991 hcd_portnum + 1);
1992 bogus_port_status = true;
1993 goto cleanup;
1994 }
1995 }
1996
1997 /*
1998 * Check to see if xhci-hub.c is waiting on RExit to U0 transition (or
1999 * RExit to a disconnect state). If so, let the driver know it's
2000 * out of the RExit state.
2001 */
2002 if (hcd->speed < HCD_USB3 && port->rexit_active) {
2003 complete(&port->rexit_done);
2004 port->rexit_active = false;
2005 bogus_port_status = true;
2006 goto cleanup;
2007 }
2008
2009 if (hcd->speed < HCD_USB3) {
2010 xhci_test_and_clear_bit(xhci, port, PORT_PLC);
2011 if ((xhci->quirks & XHCI_RESET_PLL_ON_DISCONNECT) &&
2012 (portsc & PORT_CSC) && !(portsc & PORT_CONNECT))
2013 xhci_cavium_reset_phy_quirk(xhci);
2014 }
2015
2016cleanup:
2017
2018 /* Don't make the USB core poll the roothub if we got a bad port status
2019 * change event. Besides, at that point we can't tell which roothub
2020 * (USB 2.0 or USB 3.0) to kick.
2021 */
2022 if (bogus_port_status)
2023 return;
2024
2025 /*
2026 * xHCI port-status-change events occur when the "or" of all the
2027 * status-change bits in the portsc register changes from 0 to 1.
2028 * New status changes won't cause an event if any other change
2029 * bits are still set. When an event occurs, switch over to
2030 * polling to avoid losing status changes.
2031 */
2032 xhci_dbg(xhci, "%s: starting usb%d port polling.\n",
2033 __func__, hcd->self.busnum);
2034 set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
2035 spin_unlock(&xhci->lock);
2036 /* Pass this up to the core */
2037 usb_hcd_poll_rh_status(hcd);
2038 spin_lock(&xhci->lock);
2039}
2040
2041/*
2042 * This TD is defined by the TRBs starting at start_trb in start_seg and ending
2043 * at end_trb, which may be in another segment. If the suspect DMA address is a
2044 * TRB in this TD, this function returns that TRB's segment. Otherwise it
2045 * returns 0.
2046 */
2047struct xhci_segment *trb_in_td(struct xhci_hcd *xhci,
2048 struct xhci_segment *start_seg,
2049 union xhci_trb *start_trb,
2050 union xhci_trb *end_trb,
2051 dma_addr_t suspect_dma,
2052 bool debug)
2053{
2054 dma_addr_t start_dma;
2055 dma_addr_t end_seg_dma;
2056 dma_addr_t end_trb_dma;
2057 struct xhci_segment *cur_seg;
2058
2059 start_dma = xhci_trb_virt_to_dma(start_seg, start_trb);
2060 cur_seg = start_seg;
2061
2062 do {
2063 if (start_dma == 0)
2064 return NULL;
2065 /* We may get an event for a Link TRB in the middle of a TD */
2066 end_seg_dma = xhci_trb_virt_to_dma(cur_seg,
2067 &cur_seg->trbs[TRBS_PER_SEGMENT - 1]);
2068 /* If the end TRB isn't in this segment, this is set to 0 */
2069 end_trb_dma = xhci_trb_virt_to_dma(cur_seg, end_trb);
2070
2071 if (debug)
2072 xhci_warn(xhci,
2073 "Looking for event-dma %016llx trb-start %016llx trb-end %016llx seg-start %016llx seg-end %016llx\n",
2074 (unsigned long long)suspect_dma,
2075 (unsigned long long)start_dma,
2076 (unsigned long long)end_trb_dma,
2077 (unsigned long long)cur_seg->dma,
2078 (unsigned long long)end_seg_dma);
2079
2080 if (end_trb_dma > 0) {
2081 /* The end TRB is in this segment, so suspect should be here */
2082 if (start_dma <= end_trb_dma) {
2083 if (suspect_dma >= start_dma && suspect_dma <= end_trb_dma)
2084 return cur_seg;
2085 } else {
2086 /* Case for one segment with
2087 * a TD wrapped around to the top
2088 */
2089 if ((suspect_dma >= start_dma &&
2090 suspect_dma <= end_seg_dma) ||
2091 (suspect_dma >= cur_seg->dma &&
2092 suspect_dma <= end_trb_dma))
2093 return cur_seg;
2094 }
2095 return NULL;
2096 } else {
2097 /* Might still be somewhere in this segment */
2098 if (suspect_dma >= start_dma && suspect_dma <= end_seg_dma)
2099 return cur_seg;
2100 }
2101 cur_seg = cur_seg->next;
2102 start_dma = xhci_trb_virt_to_dma(cur_seg, &cur_seg->trbs[0]);
2103 } while (cur_seg != start_seg);
2104
2105 return NULL;
2106}
2107
2108static void xhci_clear_hub_tt_buffer(struct xhci_hcd *xhci, struct xhci_td *td,
2109 struct xhci_virt_ep *ep)
2110{
2111 /*
2112 * As part of low/full-speed endpoint-halt processing
2113 * we must clear the TT buffer (USB 2.0 specification 11.17.5).
2114 */
2115 if (td->urb->dev->tt && !usb_pipeint(td->urb->pipe) &&
2116 (td->urb->dev->tt->hub != xhci_to_hcd(xhci)->self.root_hub) &&
2117 !(ep->ep_state & EP_CLEARING_TT)) {
2118 ep->ep_state |= EP_CLEARING_TT;
2119 td->urb->ep->hcpriv = td->urb->dev;
2120 if (usb_hub_clear_tt_buffer(td->urb))
2121 ep->ep_state &= ~EP_CLEARING_TT;
2122 }
2123}
2124
2125/* Check if an error has halted the endpoint ring. The class driver will
2126 * cleanup the halt for a non-default control endpoint if we indicate a stall.
2127 * However, a babble and other errors also halt the endpoint ring, and the class
2128 * driver won't clear the halt in that case, so we need to issue a Set Transfer
2129 * Ring Dequeue Pointer command manually.
2130 */
2131static int xhci_requires_manual_halt_cleanup(struct xhci_hcd *xhci,
2132 struct xhci_ep_ctx *ep_ctx,
2133 unsigned int trb_comp_code)
2134{
2135 /* TRB completion codes that may require a manual halt cleanup */
2136 if (trb_comp_code == COMP_USB_TRANSACTION_ERROR ||
2137 trb_comp_code == COMP_BABBLE_DETECTED_ERROR ||
2138 trb_comp_code == COMP_SPLIT_TRANSACTION_ERROR)
2139 /* The 0.95 spec says a babbling control endpoint
2140 * is not halted. The 0.96 spec says it is. Some HW
2141 * claims to be 0.95 compliant, but it halts the control
2142 * endpoint anyway. Check if a babble halted the
2143 * endpoint.
2144 */
2145 if (GET_EP_CTX_STATE(ep_ctx) == EP_STATE_HALTED)
2146 return 1;
2147
2148 return 0;
2149}
2150
2151int xhci_is_vendor_info_code(struct xhci_hcd *xhci, unsigned int trb_comp_code)
2152{
2153 if (trb_comp_code >= 224 && trb_comp_code <= 255) {
2154 /* Vendor defined "informational" completion code,
2155 * treat as not-an-error.
2156 */
2157 xhci_dbg(xhci, "Vendor defined info completion code %u\n",
2158 trb_comp_code);
2159 xhci_dbg(xhci, "Treating code as success.\n");
2160 return 1;
2161 }
2162 return 0;
2163}
2164
2165static int finish_td(struct xhci_hcd *xhci, struct xhci_virt_ep *ep,
2166 struct xhci_ring *ep_ring, struct xhci_td *td,
2167 u32 trb_comp_code)
2168{
2169 struct xhci_ep_ctx *ep_ctx;
2170
2171 ep_ctx = xhci_get_ep_ctx(xhci, ep->vdev->out_ctx, ep->ep_index);
2172
2173 switch (trb_comp_code) {
2174 case COMP_STOPPED_LENGTH_INVALID:
2175 case COMP_STOPPED_SHORT_PACKET:
2176 case COMP_STOPPED:
2177 /*
2178 * The "Stop Endpoint" completion will take care of any
2179 * stopped TDs. A stopped TD may be restarted, so don't update
2180 * the ring dequeue pointer or take this TD off any lists yet.
2181 */
2182 return 0;
2183 case COMP_USB_TRANSACTION_ERROR:
2184 case COMP_BABBLE_DETECTED_ERROR:
2185 case COMP_SPLIT_TRANSACTION_ERROR:
2186 /*
2187 * If endpoint context state is not halted we might be
2188 * racing with a reset endpoint command issued by a unsuccessful
2189 * stop endpoint completion (context error). In that case the
2190 * td should be on the cancelled list, and EP_HALTED flag set.
2191 *
2192 * Or then it's not halted due to the 0.95 spec stating that a
2193 * babbling control endpoint should not halt. The 0.96 spec
2194 * again says it should. Some HW claims to be 0.95 compliant,
2195 * but it halts the control endpoint anyway.
2196 */
2197 if (GET_EP_CTX_STATE(ep_ctx) != EP_STATE_HALTED) {
2198 /*
2199 * If EP_HALTED is set and TD is on the cancelled list
2200 * the TD and dequeue pointer will be handled by reset
2201 * ep command completion
2202 */
2203 if ((ep->ep_state & EP_HALTED) &&
2204 !list_empty(&td->cancelled_td_list)) {
2205 xhci_dbg(xhci, "Already resolving halted ep for 0x%llx\n",
2206 (unsigned long long)xhci_trb_virt_to_dma(
2207 td->start_seg, td->first_trb));
2208 return 0;
2209 }
2210 /* endpoint not halted, don't reset it */
2211 break;
2212 }
2213 /* Almost same procedure as for STALL_ERROR below */
2214 xhci_clear_hub_tt_buffer(xhci, td, ep);
2215 xhci_handle_halted_endpoint(xhci, ep, td, EP_HARD_RESET);
2216 return 0;
2217 case COMP_STALL_ERROR:
2218 /*
2219 * xhci internal endpoint state will go to a "halt" state for
2220 * any stall, including default control pipe protocol stall.
2221 * To clear the host side halt we need to issue a reset endpoint
2222 * command, followed by a set dequeue command to move past the
2223 * TD.
2224 * Class drivers clear the device side halt from a functional
2225 * stall later. Hub TT buffer should only be cleared for FS/LS
2226 * devices behind HS hubs for functional stalls.
2227 */
2228 if (ep->ep_index != 0)
2229 xhci_clear_hub_tt_buffer(xhci, td, ep);
2230
2231 xhci_handle_halted_endpoint(xhci, ep, td, EP_HARD_RESET);
2232
2233 return 0; /* xhci_handle_halted_endpoint marked td cancelled */
2234 default:
2235 break;
2236 }
2237
2238 /* Update ring dequeue pointer */
2239 ep_ring->dequeue = td->last_trb;
2240 ep_ring->deq_seg = td->last_trb_seg;
2241 inc_deq(xhci, ep_ring);
2242
2243 return xhci_td_cleanup(xhci, td, ep_ring, td->status);
2244}
2245
2246/* sum trb lengths from ring dequeue up to stop_trb, _excluding_ stop_trb */
2247static int sum_trb_lengths(struct xhci_hcd *xhci, struct xhci_ring *ring,
2248 union xhci_trb *stop_trb)
2249{
2250 u32 sum;
2251 union xhci_trb *trb = ring->dequeue;
2252 struct xhci_segment *seg = ring->deq_seg;
2253
2254 for (sum = 0; trb != stop_trb; next_trb(xhci, ring, &seg, &trb)) {
2255 if (!trb_is_noop(trb) && !trb_is_link(trb))
2256 sum += TRB_LEN(le32_to_cpu(trb->generic.field[2]));
2257 }
2258 return sum;
2259}
2260
2261/*
2262 * Process control tds, update urb status and actual_length.
2263 */
2264static int process_ctrl_td(struct xhci_hcd *xhci, struct xhci_virt_ep *ep,
2265 struct xhci_ring *ep_ring, struct xhci_td *td,
2266 union xhci_trb *ep_trb, struct xhci_transfer_event *event)
2267{
2268 struct xhci_ep_ctx *ep_ctx;
2269 u32 trb_comp_code;
2270 u32 remaining, requested;
2271 u32 trb_type;
2272
2273 trb_type = TRB_FIELD_TO_TYPE(le32_to_cpu(ep_trb->generic.field[3]));
2274 ep_ctx = xhci_get_ep_ctx(xhci, ep->vdev->out_ctx, ep->ep_index);
2275 trb_comp_code = GET_COMP_CODE(le32_to_cpu(event->transfer_len));
2276 requested = td->urb->transfer_buffer_length;
2277 remaining = EVENT_TRB_LEN(le32_to_cpu(event->transfer_len));
2278
2279 switch (trb_comp_code) {
2280 case COMP_SUCCESS:
2281 if (trb_type != TRB_STATUS) {
2282 xhci_warn(xhci, "WARN: Success on ctrl %s TRB without IOC set?\n",
2283 (trb_type == TRB_DATA) ? "data" : "setup");
2284 td->status = -ESHUTDOWN;
2285 break;
2286 }
2287 td->status = 0;
2288 break;
2289 case COMP_SHORT_PACKET:
2290 td->status = 0;
2291 break;
2292 case COMP_STOPPED_SHORT_PACKET:
2293 if (trb_type == TRB_DATA || trb_type == TRB_NORMAL)
2294 td->urb->actual_length = remaining;
2295 else
2296 xhci_warn(xhci, "WARN: Stopped Short Packet on ctrl setup or status TRB\n");
2297 goto finish_td;
2298 case COMP_STOPPED:
2299 switch (trb_type) {
2300 case TRB_SETUP:
2301 td->urb->actual_length = 0;
2302 goto finish_td;
2303 case TRB_DATA:
2304 case TRB_NORMAL:
2305 td->urb->actual_length = requested - remaining;
2306 goto finish_td;
2307 case TRB_STATUS:
2308 td->urb->actual_length = requested;
2309 goto finish_td;
2310 default:
2311 xhci_warn(xhci, "WARN: unexpected TRB Type %d\n",
2312 trb_type);
2313 goto finish_td;
2314 }
2315 case COMP_STOPPED_LENGTH_INVALID:
2316 goto finish_td;
2317 default:
2318 if (!xhci_requires_manual_halt_cleanup(xhci,
2319 ep_ctx, trb_comp_code))
2320 break;
2321 xhci_dbg(xhci, "TRB error %u, halted endpoint index = %u\n",
2322 trb_comp_code, ep->ep_index);
2323 fallthrough;
2324 case COMP_STALL_ERROR:
2325 /* Did we transfer part of the data (middle) phase? */
2326 if (trb_type == TRB_DATA || trb_type == TRB_NORMAL)
2327 td->urb->actual_length = requested - remaining;
2328 else if (!td->urb_length_set)
2329 td->urb->actual_length = 0;
2330 goto finish_td;
2331 }
2332
2333 /* stopped at setup stage, no data transferred */
2334 if (trb_type == TRB_SETUP)
2335 goto finish_td;
2336
2337 /*
2338 * if on data stage then update the actual_length of the URB and flag it
2339 * as set, so it won't be overwritten in the event for the last TRB.
2340 */
2341 if (trb_type == TRB_DATA ||
2342 trb_type == TRB_NORMAL) {
2343 td->urb_length_set = true;
2344 td->urb->actual_length = requested - remaining;
2345 xhci_dbg(xhci, "Waiting for status stage event\n");
2346 return 0;
2347 }
2348
2349 /* at status stage */
2350 if (!td->urb_length_set)
2351 td->urb->actual_length = requested;
2352
2353finish_td:
2354 return finish_td(xhci, ep, ep_ring, td, trb_comp_code);
2355}
2356
2357/*
2358 * Process isochronous tds, update urb packet status and actual_length.
2359 */
2360static int process_isoc_td(struct xhci_hcd *xhci, struct xhci_virt_ep *ep,
2361 struct xhci_ring *ep_ring, struct xhci_td *td,
2362 union xhci_trb *ep_trb, struct xhci_transfer_event *event)
2363{
2364 struct urb_priv *urb_priv;
2365 int idx;
2366 struct usb_iso_packet_descriptor *frame;
2367 u32 trb_comp_code;
2368 bool sum_trbs_for_length = false;
2369 u32 remaining, requested, ep_trb_len;
2370 int short_framestatus;
2371
2372 trb_comp_code = GET_COMP_CODE(le32_to_cpu(event->transfer_len));
2373 urb_priv = td->urb->hcpriv;
2374 idx = urb_priv->num_tds_done;
2375 frame = &td->urb->iso_frame_desc[idx];
2376 requested = frame->length;
2377 remaining = EVENT_TRB_LEN(le32_to_cpu(event->transfer_len));
2378 ep_trb_len = TRB_LEN(le32_to_cpu(ep_trb->generic.field[2]));
2379 short_framestatus = td->urb->transfer_flags & URB_SHORT_NOT_OK ?
2380 -EREMOTEIO : 0;
2381
2382 /* handle completion code */
2383 switch (trb_comp_code) {
2384 case COMP_SUCCESS:
2385 /* Don't overwrite status if TD had an error, see xHCI 4.9.1 */
2386 if (td->error_mid_td)
2387 break;
2388 if (remaining) {
2389 frame->status = short_framestatus;
2390 if (xhci->quirks & XHCI_TRUST_TX_LENGTH)
2391 sum_trbs_for_length = true;
2392 break;
2393 }
2394 frame->status = 0;
2395 break;
2396 case COMP_SHORT_PACKET:
2397 frame->status = short_framestatus;
2398 sum_trbs_for_length = true;
2399 break;
2400 case COMP_BANDWIDTH_OVERRUN_ERROR:
2401 frame->status = -ECOMM;
2402 break;
2403 case COMP_BABBLE_DETECTED_ERROR:
2404 sum_trbs_for_length = true;
2405 fallthrough;
2406 case COMP_ISOCH_BUFFER_OVERRUN:
2407 frame->status = -EOVERFLOW;
2408 if (ep_trb != td->last_trb)
2409 td->error_mid_td = true;
2410 break;
2411 case COMP_INCOMPATIBLE_DEVICE_ERROR:
2412 case COMP_STALL_ERROR:
2413 frame->status = -EPROTO;
2414 break;
2415 case COMP_USB_TRANSACTION_ERROR:
2416 frame->status = -EPROTO;
2417 sum_trbs_for_length = true;
2418 if (ep_trb != td->last_trb)
2419 td->error_mid_td = true;
2420 break;
2421 case COMP_STOPPED:
2422 sum_trbs_for_length = true;
2423 break;
2424 case COMP_STOPPED_SHORT_PACKET:
2425 /* field normally containing residue now contains tranferred */
2426 frame->status = short_framestatus;
2427 requested = remaining;
2428 break;
2429 case COMP_STOPPED_LENGTH_INVALID:
2430 requested = 0;
2431 remaining = 0;
2432 break;
2433 default:
2434 sum_trbs_for_length = true;
2435 frame->status = -1;
2436 break;
2437 }
2438
2439 if (td->urb_length_set)
2440 goto finish_td;
2441
2442 if (sum_trbs_for_length)
2443 frame->actual_length = sum_trb_lengths(xhci, ep->ring, ep_trb) +
2444 ep_trb_len - remaining;
2445 else
2446 frame->actual_length = requested;
2447
2448 td->urb->actual_length += frame->actual_length;
2449
2450finish_td:
2451 /* Don't give back TD yet if we encountered an error mid TD */
2452 if (td->error_mid_td && ep_trb != td->last_trb) {
2453 xhci_dbg(xhci, "Error mid isoc TD, wait for final completion event\n");
2454 td->urb_length_set = true;
2455 return 0;
2456 }
2457
2458 return finish_td(xhci, ep, ep_ring, td, trb_comp_code);
2459}
2460
2461static int skip_isoc_td(struct xhci_hcd *xhci, struct xhci_td *td,
2462 struct xhci_virt_ep *ep, int status)
2463{
2464 struct urb_priv *urb_priv;
2465 struct usb_iso_packet_descriptor *frame;
2466 int idx;
2467
2468 urb_priv = td->urb->hcpriv;
2469 idx = urb_priv->num_tds_done;
2470 frame = &td->urb->iso_frame_desc[idx];
2471
2472 /* The transfer is partly done. */
2473 frame->status = -EXDEV;
2474
2475 /* calc actual length */
2476 frame->actual_length = 0;
2477
2478 /* Update ring dequeue pointer */
2479 ep->ring->dequeue = td->last_trb;
2480 ep->ring->deq_seg = td->last_trb_seg;
2481 inc_deq(xhci, ep->ring);
2482
2483 return xhci_td_cleanup(xhci, td, ep->ring, status);
2484}
2485
2486/*
2487 * Process bulk and interrupt tds, update urb status and actual_length.
2488 */
2489static int process_bulk_intr_td(struct xhci_hcd *xhci, struct xhci_virt_ep *ep,
2490 struct xhci_ring *ep_ring, struct xhci_td *td,
2491 union xhci_trb *ep_trb, struct xhci_transfer_event *event)
2492{
2493 struct xhci_slot_ctx *slot_ctx;
2494 u32 trb_comp_code;
2495 u32 remaining, requested, ep_trb_len;
2496
2497 slot_ctx = xhci_get_slot_ctx(xhci, ep->vdev->out_ctx);
2498 trb_comp_code = GET_COMP_CODE(le32_to_cpu(event->transfer_len));
2499 remaining = EVENT_TRB_LEN(le32_to_cpu(event->transfer_len));
2500 ep_trb_len = TRB_LEN(le32_to_cpu(ep_trb->generic.field[2]));
2501 requested = td->urb->transfer_buffer_length;
2502
2503 switch (trb_comp_code) {
2504 case COMP_SUCCESS:
2505 ep->err_count = 0;
2506 /* handle success with untransferred data as short packet */
2507 if (ep_trb != td->last_trb || remaining) {
2508 xhci_warn(xhci, "WARN Successful completion on short TX\n");
2509 xhci_dbg(xhci, "ep %#x - asked for %d bytes, %d bytes untransferred\n",
2510 td->urb->ep->desc.bEndpointAddress,
2511 requested, remaining);
2512 }
2513 td->status = 0;
2514 break;
2515 case COMP_SHORT_PACKET:
2516 xhci_dbg(xhci, "ep %#x - asked for %d bytes, %d bytes untransferred\n",
2517 td->urb->ep->desc.bEndpointAddress,
2518 requested, remaining);
2519 td->status = 0;
2520 break;
2521 case COMP_STOPPED_SHORT_PACKET:
2522 td->urb->actual_length = remaining;
2523 goto finish_td;
2524 case COMP_STOPPED_LENGTH_INVALID:
2525 /* stopped on ep trb with invalid length, exclude it */
2526 ep_trb_len = 0;
2527 remaining = 0;
2528 break;
2529 case COMP_USB_TRANSACTION_ERROR:
2530 if (xhci->quirks & XHCI_NO_SOFT_RETRY ||
2531 (ep->err_count++ > MAX_SOFT_RETRY) ||
2532 le32_to_cpu(slot_ctx->tt_info) & TT_SLOT)
2533 break;
2534
2535 td->status = 0;
2536
2537 xhci_handle_halted_endpoint(xhci, ep, td, EP_SOFT_RESET);
2538 return 0;
2539 default:
2540 /* do nothing */
2541 break;
2542 }
2543
2544 if (ep_trb == td->last_trb)
2545 td->urb->actual_length = requested - remaining;
2546 else
2547 td->urb->actual_length =
2548 sum_trb_lengths(xhci, ep_ring, ep_trb) +
2549 ep_trb_len - remaining;
2550finish_td:
2551 if (remaining > requested) {
2552 xhci_warn(xhci, "bad transfer trb length %d in event trb\n",
2553 remaining);
2554 td->urb->actual_length = 0;
2555 }
2556
2557 return finish_td(xhci, ep, ep_ring, td, trb_comp_code);
2558}
2559
2560/*
2561 * If this function returns an error condition, it means it got a Transfer
2562 * event with a corrupted Slot ID, Endpoint ID, or TRB DMA address.
2563 * At this point, the host controller is probably hosed and should be reset.
2564 */
2565static int handle_tx_event(struct xhci_hcd *xhci,
2566 struct xhci_interrupter *ir,
2567 struct xhci_transfer_event *event)
2568{
2569 struct xhci_virt_ep *ep;
2570 struct xhci_ring *ep_ring;
2571 unsigned int slot_id;
2572 int ep_index;
2573 struct xhci_td *td = NULL;
2574 dma_addr_t ep_trb_dma;
2575 struct xhci_segment *ep_seg;
2576 union xhci_trb *ep_trb;
2577 int status = -EINPROGRESS;
2578 struct xhci_ep_ctx *ep_ctx;
2579 u32 trb_comp_code;
2580 int td_num = 0;
2581 bool handling_skipped_tds = false;
2582
2583 slot_id = TRB_TO_SLOT_ID(le32_to_cpu(event->flags));
2584 ep_index = TRB_TO_EP_ID(le32_to_cpu(event->flags)) - 1;
2585 trb_comp_code = GET_COMP_CODE(le32_to_cpu(event->transfer_len));
2586 ep_trb_dma = le64_to_cpu(event->buffer);
2587
2588 ep = xhci_get_virt_ep(xhci, slot_id, ep_index);
2589 if (!ep) {
2590 xhci_err(xhci, "ERROR Invalid Transfer event\n");
2591 goto err_out;
2592 }
2593
2594 ep_ring = xhci_dma_to_transfer_ring(ep, ep_trb_dma);
2595 ep_ctx = xhci_get_ep_ctx(xhci, ep->vdev->out_ctx, ep_index);
2596
2597 if (GET_EP_CTX_STATE(ep_ctx) == EP_STATE_DISABLED) {
2598 xhci_err(xhci,
2599 "ERROR Transfer event for disabled endpoint slot %u ep %u\n",
2600 slot_id, ep_index);
2601 goto err_out;
2602 }
2603
2604 /* Some transfer events don't always point to a trb, see xhci 4.17.4 */
2605 if (!ep_ring) {
2606 switch (trb_comp_code) {
2607 case COMP_STALL_ERROR:
2608 case COMP_USB_TRANSACTION_ERROR:
2609 case COMP_INVALID_STREAM_TYPE_ERROR:
2610 case COMP_INVALID_STREAM_ID_ERROR:
2611 xhci_dbg(xhci, "Stream transaction error ep %u no id\n",
2612 ep_index);
2613 if (ep->err_count++ > MAX_SOFT_RETRY)
2614 xhci_handle_halted_endpoint(xhci, ep, NULL,
2615 EP_HARD_RESET);
2616 else
2617 xhci_handle_halted_endpoint(xhci, ep, NULL,
2618 EP_SOFT_RESET);
2619 goto cleanup;
2620 case COMP_RING_UNDERRUN:
2621 case COMP_RING_OVERRUN:
2622 case COMP_STOPPED_LENGTH_INVALID:
2623 goto cleanup;
2624 default:
2625 xhci_err(xhci, "ERROR Transfer event for unknown stream ring slot %u ep %u\n",
2626 slot_id, ep_index);
2627 goto err_out;
2628 }
2629 }
2630
2631 /* Count current td numbers if ep->skip is set */
2632 if (ep->skip)
2633 td_num += list_count_nodes(&ep_ring->td_list);
2634
2635 /* Look for common error cases */
2636 switch (trb_comp_code) {
2637 /* Skip codes that require special handling depending on
2638 * transfer type
2639 */
2640 case COMP_SUCCESS:
2641 if (EVENT_TRB_LEN(le32_to_cpu(event->transfer_len)) == 0)
2642 break;
2643 if (xhci->quirks & XHCI_TRUST_TX_LENGTH ||
2644 ep_ring->last_td_was_short)
2645 trb_comp_code = COMP_SHORT_PACKET;
2646 else
2647 xhci_warn_ratelimited(xhci,
2648 "WARN Successful completion on short TX for slot %u ep %u: needs XHCI_TRUST_TX_LENGTH quirk?\n",
2649 slot_id, ep_index);
2650 break;
2651 case COMP_SHORT_PACKET:
2652 break;
2653 /* Completion codes for endpoint stopped state */
2654 case COMP_STOPPED:
2655 xhci_dbg(xhci, "Stopped on Transfer TRB for slot %u ep %u\n",
2656 slot_id, ep_index);
2657 break;
2658 case COMP_STOPPED_LENGTH_INVALID:
2659 xhci_dbg(xhci,
2660 "Stopped on No-op or Link TRB for slot %u ep %u\n",
2661 slot_id, ep_index);
2662 break;
2663 case COMP_STOPPED_SHORT_PACKET:
2664 xhci_dbg(xhci,
2665 "Stopped with short packet transfer detected for slot %u ep %u\n",
2666 slot_id, ep_index);
2667 break;
2668 /* Completion codes for endpoint halted state */
2669 case COMP_STALL_ERROR:
2670 xhci_dbg(xhci, "Stalled endpoint for slot %u ep %u\n", slot_id,
2671 ep_index);
2672 status = -EPIPE;
2673 break;
2674 case COMP_SPLIT_TRANSACTION_ERROR:
2675 xhci_dbg(xhci, "Split transaction error for slot %u ep %u\n",
2676 slot_id, ep_index);
2677 status = -EPROTO;
2678 break;
2679 case COMP_USB_TRANSACTION_ERROR:
2680 xhci_dbg(xhci, "Transfer error for slot %u ep %u on endpoint\n",
2681 slot_id, ep_index);
2682 status = -EPROTO;
2683 break;
2684 case COMP_BABBLE_DETECTED_ERROR:
2685 xhci_dbg(xhci, "Babble error for slot %u ep %u on endpoint\n",
2686 slot_id, ep_index);
2687 status = -EOVERFLOW;
2688 break;
2689 /* Completion codes for endpoint error state */
2690 case COMP_TRB_ERROR:
2691 xhci_warn(xhci,
2692 "WARN: TRB error for slot %u ep %u on endpoint\n",
2693 slot_id, ep_index);
2694 status = -EILSEQ;
2695 break;
2696 /* completion codes not indicating endpoint state change */
2697 case COMP_DATA_BUFFER_ERROR:
2698 xhci_warn(xhci,
2699 "WARN: HC couldn't access mem fast enough for slot %u ep %u\n",
2700 slot_id, ep_index);
2701 status = -ENOSR;
2702 break;
2703 case COMP_BANDWIDTH_OVERRUN_ERROR:
2704 xhci_warn(xhci,
2705 "WARN: bandwidth overrun event for slot %u ep %u on endpoint\n",
2706 slot_id, ep_index);
2707 break;
2708 case COMP_ISOCH_BUFFER_OVERRUN:
2709 xhci_warn(xhci,
2710 "WARN: buffer overrun event for slot %u ep %u on endpoint",
2711 slot_id, ep_index);
2712 break;
2713 case COMP_RING_UNDERRUN:
2714 /*
2715 * When the Isoch ring is empty, the xHC will generate
2716 * a Ring Overrun Event for IN Isoch endpoint or Ring
2717 * Underrun Event for OUT Isoch endpoint.
2718 */
2719 xhci_dbg(xhci, "underrun event on endpoint\n");
2720 if (!list_empty(&ep_ring->td_list))
2721 xhci_dbg(xhci, "Underrun Event for slot %d ep %d "
2722 "still with TDs queued?\n",
2723 TRB_TO_SLOT_ID(le32_to_cpu(event->flags)),
2724 ep_index);
2725 goto cleanup;
2726 case COMP_RING_OVERRUN:
2727 xhci_dbg(xhci, "overrun event on endpoint\n");
2728 if (!list_empty(&ep_ring->td_list))
2729 xhci_dbg(xhci, "Overrun Event for slot %d ep %d "
2730 "still with TDs queued?\n",
2731 TRB_TO_SLOT_ID(le32_to_cpu(event->flags)),
2732 ep_index);
2733 goto cleanup;
2734 case COMP_MISSED_SERVICE_ERROR:
2735 /*
2736 * When encounter missed service error, one or more isoc tds
2737 * may be missed by xHC.
2738 * Set skip flag of the ep_ring; Complete the missed tds as
2739 * short transfer when process the ep_ring next time.
2740 */
2741 ep->skip = true;
2742 xhci_dbg(xhci,
2743 "Miss service interval error for slot %u ep %u, set skip flag\n",
2744 slot_id, ep_index);
2745 goto cleanup;
2746 case COMP_NO_PING_RESPONSE_ERROR:
2747 ep->skip = true;
2748 xhci_dbg(xhci,
2749 "No Ping response error for slot %u ep %u, Skip one Isoc TD\n",
2750 slot_id, ep_index);
2751 goto cleanup;
2752
2753 case COMP_INCOMPATIBLE_DEVICE_ERROR:
2754 /* needs disable slot command to recover */
2755 xhci_warn(xhci,
2756 "WARN: detect an incompatible device for slot %u ep %u",
2757 slot_id, ep_index);
2758 status = -EPROTO;
2759 break;
2760 default:
2761 if (xhci_is_vendor_info_code(xhci, trb_comp_code)) {
2762 status = 0;
2763 break;
2764 }
2765 xhci_warn(xhci,
2766 "ERROR Unknown event condition %u for slot %u ep %u , HC probably busted\n",
2767 trb_comp_code, slot_id, ep_index);
2768 goto cleanup;
2769 }
2770
2771 do {
2772 /* This TRB should be in the TD at the head of this ring's
2773 * TD list.
2774 */
2775 if (list_empty(&ep_ring->td_list)) {
2776 /*
2777 * Don't print wanings if it's due to a stopped endpoint
2778 * generating an extra completion event if the device
2779 * was suspended. Or, a event for the last TRB of a
2780 * short TD we already got a short event for.
2781 * The short TD is already removed from the TD list.
2782 */
2783
2784 if (!(trb_comp_code == COMP_STOPPED ||
2785 trb_comp_code == COMP_STOPPED_LENGTH_INVALID ||
2786 ep_ring->last_td_was_short)) {
2787 xhci_warn(xhci, "WARN Event TRB for slot %d ep %d with no TDs queued?\n",
2788 TRB_TO_SLOT_ID(le32_to_cpu(event->flags)),
2789 ep_index);
2790 }
2791 if (ep->skip) {
2792 ep->skip = false;
2793 xhci_dbg(xhci, "td_list is empty while skip flag set. Clear skip flag for slot %u ep %u.\n",
2794 slot_id, ep_index);
2795 }
2796 if (trb_comp_code == COMP_STALL_ERROR ||
2797 xhci_requires_manual_halt_cleanup(xhci, ep_ctx,
2798 trb_comp_code)) {
2799 xhci_handle_halted_endpoint(xhci, ep, NULL,
2800 EP_HARD_RESET);
2801 }
2802 goto cleanup;
2803 }
2804
2805 /* We've skipped all the TDs on the ep ring when ep->skip set */
2806 if (ep->skip && td_num == 0) {
2807 ep->skip = false;
2808 xhci_dbg(xhci, "All tds on the ep_ring skipped. Clear skip flag for slot %u ep %u.\n",
2809 slot_id, ep_index);
2810 goto cleanup;
2811 }
2812
2813 td = list_first_entry(&ep_ring->td_list, struct xhci_td,
2814 td_list);
2815 if (ep->skip)
2816 td_num--;
2817
2818 /* Is this a TRB in the currently executing TD? */
2819 ep_seg = trb_in_td(xhci, ep_ring->deq_seg, ep_ring->dequeue,
2820 td->last_trb, ep_trb_dma, false);
2821
2822 /*
2823 * Skip the Force Stopped Event. The event_trb(event_dma) of FSE
2824 * is not in the current TD pointed by ep_ring->dequeue because
2825 * that the hardware dequeue pointer still at the previous TRB
2826 * of the current TD. The previous TRB maybe a Link TD or the
2827 * last TRB of the previous TD. The command completion handle
2828 * will take care the rest.
2829 */
2830 if (!ep_seg && (trb_comp_code == COMP_STOPPED ||
2831 trb_comp_code == COMP_STOPPED_LENGTH_INVALID)) {
2832 goto cleanup;
2833 }
2834
2835 if (!ep_seg) {
2836
2837 if (ep->skip && usb_endpoint_xfer_isoc(&td->urb->ep->desc)) {
2838 skip_isoc_td(xhci, td, ep, status);
2839 goto cleanup;
2840 }
2841
2842 /*
2843 * Some hosts give a spurious success event after a short
2844 * transfer. Ignore it.
2845 */
2846 if ((xhci->quirks & XHCI_SPURIOUS_SUCCESS) &&
2847 ep_ring->last_td_was_short) {
2848 ep_ring->last_td_was_short = false;
2849 goto cleanup;
2850 }
2851
2852 /*
2853 * xhci 4.10.2 states isoc endpoints should continue
2854 * processing the next TD if there was an error mid TD.
2855 * So host like NEC don't generate an event for the last
2856 * isoc TRB even if the IOC flag is set.
2857 * xhci 4.9.1 states that if there are errors in mult-TRB
2858 * TDs xHC should generate an error for that TRB, and if xHC
2859 * proceeds to the next TD it should genete an event for
2860 * any TRB with IOC flag on the way. Other host follow this.
2861 * So this event might be for the next TD.
2862 */
2863 if (td->error_mid_td &&
2864 !list_is_last(&td->td_list, &ep_ring->td_list)) {
2865 struct xhci_td *td_next = list_next_entry(td, td_list);
2866
2867 ep_seg = trb_in_td(xhci, td_next->start_seg, td_next->first_trb,
2868 td_next->last_trb, ep_trb_dma, false);
2869 if (ep_seg) {
2870 /* give back previous TD, start handling new */
2871 xhci_dbg(xhci, "Missing TD completion event after mid TD error\n");
2872 ep_ring->dequeue = td->last_trb;
2873 ep_ring->deq_seg = td->last_trb_seg;
2874 inc_deq(xhci, ep_ring);
2875 xhci_td_cleanup(xhci, td, ep_ring, td->status);
2876 td = td_next;
2877 }
2878 }
2879
2880 if (!ep_seg) {
2881 /* HC is busted, give up! */
2882 xhci_err(xhci,
2883 "ERROR Transfer event TRB DMA ptr not "
2884 "part of current TD ep_index %d "
2885 "comp_code %u\n", ep_index,
2886 trb_comp_code);
2887 trb_in_td(xhci, ep_ring->deq_seg,
2888 ep_ring->dequeue, td->last_trb,
2889 ep_trb_dma, true);
2890 return -ESHUTDOWN;
2891 }
2892 }
2893 if (trb_comp_code == COMP_SHORT_PACKET)
2894 ep_ring->last_td_was_short = true;
2895 else
2896 ep_ring->last_td_was_short = false;
2897
2898 if (ep->skip) {
2899 xhci_dbg(xhci,
2900 "Found td. Clear skip flag for slot %u ep %u.\n",
2901 slot_id, ep_index);
2902 ep->skip = false;
2903 }
2904
2905 ep_trb = &ep_seg->trbs[(ep_trb_dma - ep_seg->dma) /
2906 sizeof(*ep_trb)];
2907
2908 trace_xhci_handle_transfer(ep_ring,
2909 (struct xhci_generic_trb *) ep_trb);
2910
2911 /*
2912 * No-op TRB could trigger interrupts in a case where
2913 * a URB was killed and a STALL_ERROR happens right
2914 * after the endpoint ring stopped. Reset the halted
2915 * endpoint. Otherwise, the endpoint remains stalled
2916 * indefinitely.
2917 */
2918
2919 if (trb_is_noop(ep_trb)) {
2920 if (trb_comp_code == COMP_STALL_ERROR ||
2921 xhci_requires_manual_halt_cleanup(xhci, ep_ctx,
2922 trb_comp_code))
2923 xhci_handle_halted_endpoint(xhci, ep, td,
2924 EP_HARD_RESET);
2925 goto cleanup;
2926 }
2927
2928 td->status = status;
2929
2930 /* update the urb's actual_length and give back to the core */
2931 if (usb_endpoint_xfer_control(&td->urb->ep->desc))
2932 process_ctrl_td(xhci, ep, ep_ring, td, ep_trb, event);
2933 else if (usb_endpoint_xfer_isoc(&td->urb->ep->desc))
2934 process_isoc_td(xhci, ep, ep_ring, td, ep_trb, event);
2935 else
2936 process_bulk_intr_td(xhci, ep, ep_ring, td, ep_trb, event);
2937cleanup:
2938 handling_skipped_tds = ep->skip &&
2939 trb_comp_code != COMP_MISSED_SERVICE_ERROR &&
2940 trb_comp_code != COMP_NO_PING_RESPONSE_ERROR;
2941
2942 /*
2943 * If ep->skip is set, it means there are missed tds on the
2944 * endpoint ring need to take care of.
2945 * Process them as short transfer until reach the td pointed by
2946 * the event.
2947 */
2948 } while (handling_skipped_tds);
2949
2950 return 0;
2951
2952err_out:
2953 xhci_err(xhci, "@%016llx %08x %08x %08x %08x\n",
2954 (unsigned long long) xhci_trb_virt_to_dma(
2955 ir->event_ring->deq_seg,
2956 ir->event_ring->dequeue),
2957 lower_32_bits(le64_to_cpu(event->buffer)),
2958 upper_32_bits(le64_to_cpu(event->buffer)),
2959 le32_to_cpu(event->transfer_len),
2960 le32_to_cpu(event->flags));
2961 return -ENODEV;
2962}
2963
2964/*
2965 * This function handles all OS-owned events on the event ring. It may drop
2966 * xhci->lock between event processing (e.g. to pass up port status changes).
2967 * Returns >0 for "possibly more events to process" (caller should call again),
2968 * otherwise 0 if done. In future, <0 returns should indicate error code.
2969 */
2970static int xhci_handle_event(struct xhci_hcd *xhci, struct xhci_interrupter *ir)
2971{
2972 union xhci_trb *event;
2973 u32 trb_type;
2974
2975 /* Event ring hasn't been allocated yet. */
2976 if (!ir || !ir->event_ring || !ir->event_ring->dequeue) {
2977 xhci_err(xhci, "ERROR interrupter not ready\n");
2978 return -ENOMEM;
2979 }
2980
2981 event = ir->event_ring->dequeue;
2982 /* Does the HC or OS own the TRB? */
2983 if ((le32_to_cpu(event->event_cmd.flags) & TRB_CYCLE) !=
2984 ir->event_ring->cycle_state)
2985 return 0;
2986
2987 trace_xhci_handle_event(ir->event_ring, &event->generic);
2988
2989 /*
2990 * Barrier between reading the TRB_CYCLE (valid) flag above and any
2991 * speculative reads of the event's flags/data below.
2992 */
2993 rmb();
2994 trb_type = TRB_FIELD_TO_TYPE(le32_to_cpu(event->event_cmd.flags));
2995 /* FIXME: Handle more event types. */
2996
2997 switch (trb_type) {
2998 case TRB_COMPLETION:
2999 handle_cmd_completion(xhci, &event->event_cmd);
3000 break;
3001 case TRB_PORT_STATUS:
3002 handle_port_status(xhci, ir, event);
3003 break;
3004 case TRB_TRANSFER:
3005 handle_tx_event(xhci, ir, &event->trans_event);
3006 break;
3007 case TRB_DEV_NOTE:
3008 handle_device_notification(xhci, event);
3009 break;
3010 default:
3011 if (trb_type >= TRB_VENDOR_DEFINED_LOW)
3012 handle_vendor_event(xhci, event, trb_type);
3013 else
3014 xhci_warn(xhci, "ERROR unknown event type %d\n", trb_type);
3015 }
3016 /* Any of the above functions may drop and re-acquire the lock, so check
3017 * to make sure a watchdog timer didn't mark the host as non-responsive.
3018 */
3019 if (xhci->xhc_state & XHCI_STATE_DYING) {
3020 xhci_dbg(xhci, "xHCI host dying, returning from "
3021 "event handler.\n");
3022 return 0;
3023 }
3024
3025 /* Update SW event ring dequeue pointer */
3026 inc_deq(xhci, ir->event_ring);
3027
3028 /* Are there more items on the event ring? Caller will call us again to
3029 * check.
3030 */
3031 return 1;
3032}
3033
3034/*
3035 * Update Event Ring Dequeue Pointer:
3036 * - When all events have finished
3037 * - To avoid "Event Ring Full Error" condition
3038 */
3039static void xhci_update_erst_dequeue(struct xhci_hcd *xhci,
3040 struct xhci_interrupter *ir,
3041 union xhci_trb *event_ring_deq,
3042 bool clear_ehb)
3043{
3044 u64 temp_64;
3045 dma_addr_t deq;
3046
3047 temp_64 = xhci_read_64(xhci, &ir->ir_set->erst_dequeue);
3048 /* If necessary, update the HW's version of the event ring deq ptr. */
3049 if (event_ring_deq != ir->event_ring->dequeue) {
3050 deq = xhci_trb_virt_to_dma(ir->event_ring->deq_seg,
3051 ir->event_ring->dequeue);
3052 if (deq == 0)
3053 xhci_warn(xhci, "WARN something wrong with SW event ring dequeue ptr\n");
3054 /*
3055 * Per 4.9.4, Software writes to the ERDP register shall
3056 * always advance the Event Ring Dequeue Pointer value.
3057 */
3058 if ((temp_64 & ERST_PTR_MASK) == (deq & ERST_PTR_MASK))
3059 return;
3060
3061 /* Update HC event ring dequeue pointer */
3062 temp_64 = ir->event_ring->deq_seg->num & ERST_DESI_MASK;
3063 temp_64 |= deq & ERST_PTR_MASK;
3064 }
3065
3066 /* Clear the event handler busy flag (RW1C) */
3067 if (clear_ehb)
3068 temp_64 |= ERST_EHB;
3069 xhci_write_64(xhci, temp_64, &ir->ir_set->erst_dequeue);
3070}
3071
3072/*
3073 * xHCI spec says we can get an interrupt, and if the HC has an error condition,
3074 * we might get bad data out of the event ring. Section 4.10.2.7 has a list of
3075 * indicators of an event TRB error, but we check the status *first* to be safe.
3076 */
3077irqreturn_t xhci_irq(struct usb_hcd *hcd)
3078{
3079 struct xhci_hcd *xhci = hcd_to_xhci(hcd);
3080 union xhci_trb *event_ring_deq;
3081 struct xhci_interrupter *ir;
3082 irqreturn_t ret = IRQ_NONE;
3083 u64 temp_64;
3084 u32 status;
3085 int event_loop = 0;
3086
3087 spin_lock(&xhci->lock);
3088 /* Check if the xHC generated the interrupt, or the irq is shared */
3089 status = readl(&xhci->op_regs->status);
3090 if (status == ~(u32)0) {
3091 xhci_hc_died(xhci);
3092 ret = IRQ_HANDLED;
3093 goto out;
3094 }
3095
3096 if (!(status & STS_EINT))
3097 goto out;
3098
3099 if (status & STS_HCE) {
3100 xhci_warn(xhci, "WARNING: Host Controller Error\n");
3101 goto out;
3102 }
3103
3104 if (status & STS_FATAL) {
3105 xhci_warn(xhci, "WARNING: Host System Error\n");
3106 xhci_halt(xhci);
3107 ret = IRQ_HANDLED;
3108 goto out;
3109 }
3110
3111 /*
3112 * Clear the op reg interrupt status first,
3113 * so we can receive interrupts from other MSI-X interrupters.
3114 * Write 1 to clear the interrupt status.
3115 */
3116 status |= STS_EINT;
3117 writel(status, &xhci->op_regs->status);
3118
3119 /* This is the handler of the primary interrupter */
3120 ir = xhci->interrupters[0];
3121 if (!hcd->msi_enabled) {
3122 u32 irq_pending;
3123 irq_pending = readl(&ir->ir_set->irq_pending);
3124 irq_pending |= IMAN_IP;
3125 writel(irq_pending, &ir->ir_set->irq_pending);
3126 }
3127
3128 if (xhci->xhc_state & XHCI_STATE_DYING ||
3129 xhci->xhc_state & XHCI_STATE_HALTED) {
3130 xhci_dbg(xhci, "xHCI dying, ignoring interrupt. "
3131 "Shouldn't IRQs be disabled?\n");
3132 /* Clear the event handler busy flag (RW1C);
3133 * the event ring should be empty.
3134 */
3135 temp_64 = xhci_read_64(xhci, &ir->ir_set->erst_dequeue);
3136 xhci_write_64(xhci, temp_64 | ERST_EHB,
3137 &ir->ir_set->erst_dequeue);
3138 ret = IRQ_HANDLED;
3139 goto out;
3140 }
3141
3142 event_ring_deq = ir->event_ring->dequeue;
3143 /* FIXME this should be a delayed service routine
3144 * that clears the EHB.
3145 */
3146 while (xhci_handle_event(xhci, ir) > 0) {
3147 if (event_loop++ < TRBS_PER_SEGMENT / 2)
3148 continue;
3149 xhci_update_erst_dequeue(xhci, ir, event_ring_deq, false);
3150 event_ring_deq = ir->event_ring->dequeue;
3151
3152 /* ring is half-full, force isoc trbs to interrupt more often */
3153 if (xhci->isoc_bei_interval > AVOID_BEI_INTERVAL_MIN)
3154 xhci->isoc_bei_interval = xhci->isoc_bei_interval / 2;
3155
3156 event_loop = 0;
3157 }
3158
3159 xhci_update_erst_dequeue(xhci, ir, event_ring_deq, true);
3160 ret = IRQ_HANDLED;
3161
3162out:
3163 spin_unlock(&xhci->lock);
3164
3165 return ret;
3166}
3167
3168irqreturn_t xhci_msi_irq(int irq, void *hcd)
3169{
3170 return xhci_irq(hcd);
3171}
3172EXPORT_SYMBOL_GPL(xhci_msi_irq);
3173
3174/**** Endpoint Ring Operations ****/
3175
3176/*
3177 * Generic function for queueing a TRB on a ring.
3178 * The caller must have checked to make sure there's room on the ring.
3179 *
3180 * @more_trbs_coming: Will you enqueue more TRBs before calling
3181 * prepare_transfer()?
3182 */
3183static void queue_trb(struct xhci_hcd *xhci, struct xhci_ring *ring,
3184 bool more_trbs_coming,
3185 u32 field1, u32 field2, u32 field3, u32 field4)
3186{
3187 struct xhci_generic_trb *trb;
3188
3189 trb = &ring->enqueue->generic;
3190 trb->field[0] = cpu_to_le32(field1);
3191 trb->field[1] = cpu_to_le32(field2);
3192 trb->field[2] = cpu_to_le32(field3);
3193 /* make sure TRB is fully written before giving it to the controller */
3194 wmb();
3195 trb->field[3] = cpu_to_le32(field4);
3196
3197 trace_xhci_queue_trb(ring, trb);
3198
3199 inc_enq(xhci, ring, more_trbs_coming);
3200}
3201
3202/*
3203 * Does various checks on the endpoint ring, and makes it ready to queue num_trbs.
3204 * expand ring if it start to be full.
3205 */
3206static int prepare_ring(struct xhci_hcd *xhci, struct xhci_ring *ep_ring,
3207 u32 ep_state, unsigned int num_trbs, gfp_t mem_flags)
3208{
3209 unsigned int link_trb_count = 0;
3210 unsigned int new_segs = 0;
3211
3212 /* Make sure the endpoint has been added to xHC schedule */
3213 switch (ep_state) {
3214 case EP_STATE_DISABLED:
3215 /*
3216 * USB core changed config/interfaces without notifying us,
3217 * or hardware is reporting the wrong state.
3218 */
3219 xhci_warn(xhci, "WARN urb submitted to disabled ep\n");
3220 return -ENOENT;
3221 case EP_STATE_ERROR:
3222 xhci_warn(xhci, "WARN waiting for error on ep to be cleared\n");
3223 /* FIXME event handling code for error needs to clear it */
3224 /* XXX not sure if this should be -ENOENT or not */
3225 return -EINVAL;
3226 case EP_STATE_HALTED:
3227 xhci_dbg(xhci, "WARN halted endpoint, queueing URB anyway.\n");
3228 break;
3229 case EP_STATE_STOPPED:
3230 case EP_STATE_RUNNING:
3231 break;
3232 default:
3233 xhci_err(xhci, "ERROR unknown endpoint state for ep\n");
3234 /*
3235 * FIXME issue Configure Endpoint command to try to get the HC
3236 * back into a known state.
3237 */
3238 return -EINVAL;
3239 }
3240
3241 if (ep_ring != xhci->cmd_ring) {
3242 new_segs = xhci_ring_expansion_needed(xhci, ep_ring, num_trbs);
3243 } else if (xhci_num_trbs_free(xhci, ep_ring) <= num_trbs) {
3244 xhci_err(xhci, "Do not support expand command ring\n");
3245 return -ENOMEM;
3246 }
3247
3248 if (new_segs) {
3249 xhci_dbg_trace(xhci, trace_xhci_dbg_ring_expansion,
3250 "ERROR no room on ep ring, try ring expansion");
3251 if (xhci_ring_expansion(xhci, ep_ring, new_segs, mem_flags)) {
3252 xhci_err(xhci, "Ring expansion failed\n");
3253 return -ENOMEM;
3254 }
3255 }
3256
3257 while (trb_is_link(ep_ring->enqueue)) {
3258 /* If we're not dealing with 0.95 hardware or isoc rings
3259 * on AMD 0.96 host, clear the chain bit.
3260 */
3261 if (!xhci_link_trb_quirk(xhci) &&
3262 !(ep_ring->type == TYPE_ISOC &&
3263 (xhci->quirks & XHCI_AMD_0x96_HOST)))
3264 ep_ring->enqueue->link.control &=
3265 cpu_to_le32(~TRB_CHAIN);
3266 else
3267 ep_ring->enqueue->link.control |=
3268 cpu_to_le32(TRB_CHAIN);
3269
3270 wmb();
3271 ep_ring->enqueue->link.control ^= cpu_to_le32(TRB_CYCLE);
3272
3273 /* Toggle the cycle bit after the last ring segment. */
3274 if (link_trb_toggles_cycle(ep_ring->enqueue))
3275 ep_ring->cycle_state ^= 1;
3276
3277 ep_ring->enq_seg = ep_ring->enq_seg->next;
3278 ep_ring->enqueue = ep_ring->enq_seg->trbs;
3279
3280 /* prevent infinite loop if all first trbs are link trbs */
3281 if (link_trb_count++ > ep_ring->num_segs) {
3282 xhci_warn(xhci, "Ring is an endless link TRB loop\n");
3283 return -EINVAL;
3284 }
3285 }
3286
3287 if (last_trb_on_seg(ep_ring->enq_seg, ep_ring->enqueue)) {
3288 xhci_warn(xhci, "Missing link TRB at end of ring segment\n");
3289 return -EINVAL;
3290 }
3291
3292 return 0;
3293}
3294
3295static int prepare_transfer(struct xhci_hcd *xhci,
3296 struct xhci_virt_device *xdev,
3297 unsigned int ep_index,
3298 unsigned int stream_id,
3299 unsigned int num_trbs,
3300 struct urb *urb,
3301 unsigned int td_index,
3302 gfp_t mem_flags)
3303{
3304 int ret;
3305 struct urb_priv *urb_priv;
3306 struct xhci_td *td;
3307 struct xhci_ring *ep_ring;
3308 struct xhci_ep_ctx *ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index);
3309
3310 ep_ring = xhci_triad_to_transfer_ring(xhci, xdev->slot_id, ep_index,
3311 stream_id);
3312 if (!ep_ring) {
3313 xhci_dbg(xhci, "Can't prepare ring for bad stream ID %u\n",
3314 stream_id);
3315 return -EINVAL;
3316 }
3317
3318 ret = prepare_ring(xhci, ep_ring, GET_EP_CTX_STATE(ep_ctx),
3319 num_trbs, mem_flags);
3320 if (ret)
3321 return ret;
3322
3323 urb_priv = urb->hcpriv;
3324 td = &urb_priv->td[td_index];
3325
3326 INIT_LIST_HEAD(&td->td_list);
3327 INIT_LIST_HEAD(&td->cancelled_td_list);
3328
3329 if (td_index == 0) {
3330 ret = usb_hcd_link_urb_to_ep(bus_to_hcd(urb->dev->bus), urb);
3331 if (unlikely(ret))
3332 return ret;
3333 }
3334
3335 td->urb = urb;
3336 /* Add this TD to the tail of the endpoint ring's TD list */
3337 list_add_tail(&td->td_list, &ep_ring->td_list);
3338 td->start_seg = ep_ring->enq_seg;
3339 td->first_trb = ep_ring->enqueue;
3340
3341 return 0;
3342}
3343
3344unsigned int count_trbs(u64 addr, u64 len)
3345{
3346 unsigned int num_trbs;
3347
3348 num_trbs = DIV_ROUND_UP(len + (addr & (TRB_MAX_BUFF_SIZE - 1)),
3349 TRB_MAX_BUFF_SIZE);
3350 if (num_trbs == 0)
3351 num_trbs++;
3352
3353 return num_trbs;
3354}
3355
3356static inline unsigned int count_trbs_needed(struct urb *urb)
3357{
3358 return count_trbs(urb->transfer_dma, urb->transfer_buffer_length);
3359}
3360
3361static unsigned int count_sg_trbs_needed(struct urb *urb)
3362{
3363 struct scatterlist *sg;
3364 unsigned int i, len, full_len, num_trbs = 0;
3365
3366 full_len = urb->transfer_buffer_length;
3367
3368 for_each_sg(urb->sg, sg, urb->num_mapped_sgs, i) {
3369 len = sg_dma_len(sg);
3370 num_trbs += count_trbs(sg_dma_address(sg), len);
3371 len = min_t(unsigned int, len, full_len);
3372 full_len -= len;
3373 if (full_len == 0)
3374 break;
3375 }
3376
3377 return num_trbs;
3378}
3379
3380static unsigned int count_isoc_trbs_needed(struct urb *urb, int i)
3381{
3382 u64 addr, len;
3383
3384 addr = (u64) (urb->transfer_dma + urb->iso_frame_desc[i].offset);
3385 len = urb->iso_frame_desc[i].length;
3386
3387 return count_trbs(addr, len);
3388}
3389
3390static void check_trb_math(struct urb *urb, int running_total)
3391{
3392 if (unlikely(running_total != urb->transfer_buffer_length))
3393 dev_err(&urb->dev->dev, "%s - ep %#x - Miscalculated tx length, "
3394 "queued %#x (%d), asked for %#x (%d)\n",
3395 __func__,
3396 urb->ep->desc.bEndpointAddress,
3397 running_total, running_total,
3398 urb->transfer_buffer_length,
3399 urb->transfer_buffer_length);
3400}
3401
3402static void giveback_first_trb(struct xhci_hcd *xhci, int slot_id,
3403 unsigned int ep_index, unsigned int stream_id, int start_cycle,
3404 struct xhci_generic_trb *start_trb)
3405{
3406 /*
3407 * Pass all the TRBs to the hardware at once and make sure this write
3408 * isn't reordered.
3409 */
3410 wmb();
3411 if (start_cycle)
3412 start_trb->field[3] |= cpu_to_le32(start_cycle);
3413 else
3414 start_trb->field[3] &= cpu_to_le32(~TRB_CYCLE);
3415 xhci_ring_ep_doorbell(xhci, slot_id, ep_index, stream_id);
3416}
3417
3418static void check_interval(struct xhci_hcd *xhci, struct urb *urb,
3419 struct xhci_ep_ctx *ep_ctx)
3420{
3421 int xhci_interval;
3422 int ep_interval;
3423
3424 xhci_interval = EP_INTERVAL_TO_UFRAMES(le32_to_cpu(ep_ctx->ep_info));
3425 ep_interval = urb->interval;
3426
3427 /* Convert to microframes */
3428 if (urb->dev->speed == USB_SPEED_LOW ||
3429 urb->dev->speed == USB_SPEED_FULL)
3430 ep_interval *= 8;
3431
3432 /* FIXME change this to a warning and a suggestion to use the new API
3433 * to set the polling interval (once the API is added).
3434 */
3435 if (xhci_interval != ep_interval) {
3436 dev_dbg_ratelimited(&urb->dev->dev,
3437 "Driver uses different interval (%d microframe%s) than xHCI (%d microframe%s)\n",
3438 ep_interval, ep_interval == 1 ? "" : "s",
3439 xhci_interval, xhci_interval == 1 ? "" : "s");
3440 urb->interval = xhci_interval;
3441 /* Convert back to frames for LS/FS devices */
3442 if (urb->dev->speed == USB_SPEED_LOW ||
3443 urb->dev->speed == USB_SPEED_FULL)
3444 urb->interval /= 8;
3445 }
3446}
3447
3448/*
3449 * xHCI uses normal TRBs for both bulk and interrupt. When the interrupt
3450 * endpoint is to be serviced, the xHC will consume (at most) one TD. A TD
3451 * (comprised of sg list entries) can take several service intervals to
3452 * transmit.
3453 */
3454int xhci_queue_intr_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
3455 struct urb *urb, int slot_id, unsigned int ep_index)
3456{
3457 struct xhci_ep_ctx *ep_ctx;
3458
3459 ep_ctx = xhci_get_ep_ctx(xhci, xhci->devs[slot_id]->out_ctx, ep_index);
3460 check_interval(xhci, urb, ep_ctx);
3461
3462 return xhci_queue_bulk_tx(xhci, mem_flags, urb, slot_id, ep_index);
3463}
3464
3465/*
3466 * For xHCI 1.0 host controllers, TD size is the number of max packet sized
3467 * packets remaining in the TD (*not* including this TRB).
3468 *
3469 * Total TD packet count = total_packet_count =
3470 * DIV_ROUND_UP(TD size in bytes / wMaxPacketSize)
3471 *
3472 * Packets transferred up to and including this TRB = packets_transferred =
3473 * rounddown(total bytes transferred including this TRB / wMaxPacketSize)
3474 *
3475 * TD size = total_packet_count - packets_transferred
3476 *
3477 * For xHCI 0.96 and older, TD size field should be the remaining bytes
3478 * including this TRB, right shifted by 10
3479 *
3480 * For all hosts it must fit in bits 21:17, so it can't be bigger than 31.
3481 * This is taken care of in the TRB_TD_SIZE() macro
3482 *
3483 * The last TRB in a TD must have the TD size set to zero.
3484 */
3485static u32 xhci_td_remainder(struct xhci_hcd *xhci, int transferred,
3486 int trb_buff_len, unsigned int td_total_len,
3487 struct urb *urb, bool more_trbs_coming)
3488{
3489 u32 maxp, total_packet_count;
3490
3491 /* MTK xHCI 0.96 contains some features from 1.0 */
3492 if (xhci->hci_version < 0x100 && !(xhci->quirks & XHCI_MTK_HOST))
3493 return ((td_total_len - transferred) >> 10);
3494
3495 /* One TRB with a zero-length data packet. */
3496 if (!more_trbs_coming || (transferred == 0 && trb_buff_len == 0) ||
3497 trb_buff_len == td_total_len)
3498 return 0;
3499
3500 /* for MTK xHCI 0.96, TD size include this TRB, but not in 1.x */
3501 if ((xhci->quirks & XHCI_MTK_HOST) && (xhci->hci_version < 0x100))
3502 trb_buff_len = 0;
3503
3504 maxp = usb_endpoint_maxp(&urb->ep->desc);
3505 total_packet_count = DIV_ROUND_UP(td_total_len, maxp);
3506
3507 /* Queueing functions don't count the current TRB into transferred */
3508 return (total_packet_count - ((transferred + trb_buff_len) / maxp));
3509}
3510
3511
3512static int xhci_align_td(struct xhci_hcd *xhci, struct urb *urb, u32 enqd_len,
3513 u32 *trb_buff_len, struct xhci_segment *seg)
3514{
3515 struct device *dev = xhci_to_hcd(xhci)->self.sysdev;
3516 unsigned int unalign;
3517 unsigned int max_pkt;
3518 u32 new_buff_len;
3519 size_t len;
3520
3521 max_pkt = usb_endpoint_maxp(&urb->ep->desc);
3522 unalign = (enqd_len + *trb_buff_len) % max_pkt;
3523
3524 /* we got lucky, last normal TRB data on segment is packet aligned */
3525 if (unalign == 0)
3526 return 0;
3527
3528 xhci_dbg(xhci, "Unaligned %d bytes, buff len %d\n",
3529 unalign, *trb_buff_len);
3530
3531 /* is the last nornal TRB alignable by splitting it */
3532 if (*trb_buff_len > unalign) {
3533 *trb_buff_len -= unalign;
3534 xhci_dbg(xhci, "split align, new buff len %d\n", *trb_buff_len);
3535 return 0;
3536 }
3537
3538 /*
3539 * We want enqd_len + trb_buff_len to sum up to a number aligned to
3540 * number which is divisible by the endpoint's wMaxPacketSize. IOW:
3541 * (size of currently enqueued TRBs + remainder) % wMaxPacketSize == 0.
3542 */
3543 new_buff_len = max_pkt - (enqd_len % max_pkt);
3544
3545 if (new_buff_len > (urb->transfer_buffer_length - enqd_len))
3546 new_buff_len = (urb->transfer_buffer_length - enqd_len);
3547
3548 /* create a max max_pkt sized bounce buffer pointed to by last trb */
3549 if (usb_urb_dir_out(urb)) {
3550 if (urb->num_sgs) {
3551 len = sg_pcopy_to_buffer(urb->sg, urb->num_sgs,
3552 seg->bounce_buf, new_buff_len, enqd_len);
3553 if (len != new_buff_len)
3554 xhci_warn(xhci, "WARN Wrong bounce buffer write length: %zu != %d\n",
3555 len, new_buff_len);
3556 } else {
3557 memcpy(seg->bounce_buf, urb->transfer_buffer + enqd_len, new_buff_len);
3558 }
3559
3560 seg->bounce_dma = dma_map_single(dev, seg->bounce_buf,
3561 max_pkt, DMA_TO_DEVICE);
3562 } else {
3563 seg->bounce_dma = dma_map_single(dev, seg->bounce_buf,
3564 max_pkt, DMA_FROM_DEVICE);
3565 }
3566
3567 if (dma_mapping_error(dev, seg->bounce_dma)) {
3568 /* try without aligning. Some host controllers survive */
3569 xhci_warn(xhci, "Failed mapping bounce buffer, not aligning\n");
3570 return 0;
3571 }
3572 *trb_buff_len = new_buff_len;
3573 seg->bounce_len = new_buff_len;
3574 seg->bounce_offs = enqd_len;
3575
3576 xhci_dbg(xhci, "Bounce align, new buff len %d\n", *trb_buff_len);
3577
3578 return 1;
3579}
3580
3581/* This is very similar to what ehci-q.c qtd_fill() does */
3582int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
3583 struct urb *urb, int slot_id, unsigned int ep_index)
3584{
3585 struct xhci_ring *ring;
3586 struct urb_priv *urb_priv;
3587 struct xhci_td *td;
3588 struct xhci_generic_trb *start_trb;
3589 struct scatterlist *sg = NULL;
3590 bool more_trbs_coming = true;
3591 bool need_zero_pkt = false;
3592 bool first_trb = true;
3593 unsigned int num_trbs;
3594 unsigned int start_cycle, num_sgs = 0;
3595 unsigned int enqd_len, block_len, trb_buff_len, full_len;
3596 int sent_len, ret;
3597 u32 field, length_field, remainder;
3598 u64 addr, send_addr;
3599
3600 ring = xhci_urb_to_transfer_ring(xhci, urb);
3601 if (!ring)
3602 return -EINVAL;
3603
3604 full_len = urb->transfer_buffer_length;
3605 /* If we have scatter/gather list, we use it. */
3606 if (urb->num_sgs && !(urb->transfer_flags & URB_DMA_MAP_SINGLE)) {
3607 num_sgs = urb->num_mapped_sgs;
3608 sg = urb->sg;
3609 addr = (u64) sg_dma_address(sg);
3610 block_len = sg_dma_len(sg);
3611 num_trbs = count_sg_trbs_needed(urb);
3612 } else {
3613 num_trbs = count_trbs_needed(urb);
3614 addr = (u64) urb->transfer_dma;
3615 block_len = full_len;
3616 }
3617 ret = prepare_transfer(xhci, xhci->devs[slot_id],
3618 ep_index, urb->stream_id,
3619 num_trbs, urb, 0, mem_flags);
3620 if (unlikely(ret < 0))
3621 return ret;
3622
3623 urb_priv = urb->hcpriv;
3624
3625 /* Deal with URB_ZERO_PACKET - need one more td/trb */
3626 if (urb->transfer_flags & URB_ZERO_PACKET && urb_priv->num_tds > 1)
3627 need_zero_pkt = true;
3628
3629 td = &urb_priv->td[0];
3630
3631 /*
3632 * Don't give the first TRB to the hardware (by toggling the cycle bit)
3633 * until we've finished creating all the other TRBs. The ring's cycle
3634 * state may change as we enqueue the other TRBs, so save it too.
3635 */
3636 start_trb = &ring->enqueue->generic;
3637 start_cycle = ring->cycle_state;
3638 send_addr = addr;
3639
3640 /* Queue the TRBs, even if they are zero-length */
3641 for (enqd_len = 0; first_trb || enqd_len < full_len;
3642 enqd_len += trb_buff_len) {
3643 field = TRB_TYPE(TRB_NORMAL);
3644
3645 /* TRB buffer should not cross 64KB boundaries */
3646 trb_buff_len = TRB_BUFF_LEN_UP_TO_BOUNDARY(addr);
3647 trb_buff_len = min_t(unsigned int, trb_buff_len, block_len);
3648
3649 if (enqd_len + trb_buff_len > full_len)
3650 trb_buff_len = full_len - enqd_len;
3651
3652 /* Don't change the cycle bit of the first TRB until later */
3653 if (first_trb) {
3654 first_trb = false;
3655 if (start_cycle == 0)
3656 field |= TRB_CYCLE;
3657 } else
3658 field |= ring->cycle_state;
3659
3660 /* Chain all the TRBs together; clear the chain bit in the last
3661 * TRB to indicate it's the last TRB in the chain.
3662 */
3663 if (enqd_len + trb_buff_len < full_len) {
3664 field |= TRB_CHAIN;
3665 if (trb_is_link(ring->enqueue + 1)) {
3666 if (xhci_align_td(xhci, urb, enqd_len,
3667 &trb_buff_len,
3668 ring->enq_seg)) {
3669 send_addr = ring->enq_seg->bounce_dma;
3670 /* assuming TD won't span 2 segs */
3671 td->bounce_seg = ring->enq_seg;
3672 }
3673 }
3674 }
3675 if (enqd_len + trb_buff_len >= full_len) {
3676 field &= ~TRB_CHAIN;
3677 field |= TRB_IOC;
3678 more_trbs_coming = false;
3679 td->last_trb = ring->enqueue;
3680 td->last_trb_seg = ring->enq_seg;
3681 if (xhci_urb_suitable_for_idt(urb)) {
3682 memcpy(&send_addr, urb->transfer_buffer,
3683 trb_buff_len);
3684 le64_to_cpus(&send_addr);
3685 field |= TRB_IDT;
3686 }
3687 }
3688
3689 /* Only set interrupt on short packet for IN endpoints */
3690 if (usb_urb_dir_in(urb))
3691 field |= TRB_ISP;
3692
3693 /* Set the TRB length, TD size, and interrupter fields. */
3694 remainder = xhci_td_remainder(xhci, enqd_len, trb_buff_len,
3695 full_len, urb, more_trbs_coming);
3696
3697 length_field = TRB_LEN(trb_buff_len) |
3698 TRB_TD_SIZE(remainder) |
3699 TRB_INTR_TARGET(0);
3700
3701 queue_trb(xhci, ring, more_trbs_coming | need_zero_pkt,
3702 lower_32_bits(send_addr),
3703 upper_32_bits(send_addr),
3704 length_field,
3705 field);
3706 td->num_trbs++;
3707 addr += trb_buff_len;
3708 sent_len = trb_buff_len;
3709
3710 while (sg && sent_len >= block_len) {
3711 /* New sg entry */
3712 --num_sgs;
3713 sent_len -= block_len;
3714 sg = sg_next(sg);
3715 if (num_sgs != 0 && sg) {
3716 block_len = sg_dma_len(sg);
3717 addr = (u64) sg_dma_address(sg);
3718 addr += sent_len;
3719 }
3720 }
3721 block_len -= sent_len;
3722 send_addr = addr;
3723 }
3724
3725 if (need_zero_pkt) {
3726 ret = prepare_transfer(xhci, xhci->devs[slot_id],
3727 ep_index, urb->stream_id,
3728 1, urb, 1, mem_flags);
3729 urb_priv->td[1].last_trb = ring->enqueue;
3730 urb_priv->td[1].last_trb_seg = ring->enq_seg;
3731 field = TRB_TYPE(TRB_NORMAL) | ring->cycle_state | TRB_IOC;
3732 queue_trb(xhci, ring, 0, 0, 0, TRB_INTR_TARGET(0), field);
3733 urb_priv->td[1].num_trbs++;
3734 }
3735
3736 check_trb_math(urb, enqd_len);
3737 giveback_first_trb(xhci, slot_id, ep_index, urb->stream_id,
3738 start_cycle, start_trb);
3739 return 0;
3740}
3741
3742/* Caller must have locked xhci->lock */
3743int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
3744 struct urb *urb, int slot_id, unsigned int ep_index)
3745{
3746 struct xhci_ring *ep_ring;
3747 int num_trbs;
3748 int ret;
3749 struct usb_ctrlrequest *setup;
3750 struct xhci_generic_trb *start_trb;
3751 int start_cycle;
3752 u32 field;
3753 struct urb_priv *urb_priv;
3754 struct xhci_td *td;
3755
3756 ep_ring = xhci_urb_to_transfer_ring(xhci, urb);
3757 if (!ep_ring)
3758 return -EINVAL;
3759
3760 /*
3761 * Need to copy setup packet into setup TRB, so we can't use the setup
3762 * DMA address.
3763 */
3764 if (!urb->setup_packet)
3765 return -EINVAL;
3766
3767 /* 1 TRB for setup, 1 for status */
3768 num_trbs = 2;
3769 /*
3770 * Don't need to check if we need additional event data and normal TRBs,
3771 * since data in control transfers will never get bigger than 16MB
3772 * XXX: can we get a buffer that crosses 64KB boundaries?
3773 */
3774 if (urb->transfer_buffer_length > 0)
3775 num_trbs++;
3776 ret = prepare_transfer(xhci, xhci->devs[slot_id],
3777 ep_index, urb->stream_id,
3778 num_trbs, urb, 0, mem_flags);
3779 if (ret < 0)
3780 return ret;
3781
3782 urb_priv = urb->hcpriv;
3783 td = &urb_priv->td[0];
3784 td->num_trbs = num_trbs;
3785
3786 /*
3787 * Don't give the first TRB to the hardware (by toggling the cycle bit)
3788 * until we've finished creating all the other TRBs. The ring's cycle
3789 * state may change as we enqueue the other TRBs, so save it too.
3790 */
3791 start_trb = &ep_ring->enqueue->generic;
3792 start_cycle = ep_ring->cycle_state;
3793
3794 /* Queue setup TRB - see section 6.4.1.2.1 */
3795 /* FIXME better way to translate setup_packet into two u32 fields? */
3796 setup = (struct usb_ctrlrequest *) urb->setup_packet;
3797 field = 0;
3798 field |= TRB_IDT | TRB_TYPE(TRB_SETUP);
3799 if (start_cycle == 0)
3800 field |= 0x1;
3801
3802 /* xHCI 1.0/1.1 6.4.1.2.1: Transfer Type field */
3803 if ((xhci->hci_version >= 0x100) || (xhci->quirks & XHCI_MTK_HOST)) {
3804 if (urb->transfer_buffer_length > 0) {
3805 if (setup->bRequestType & USB_DIR_IN)
3806 field |= TRB_TX_TYPE(TRB_DATA_IN);
3807 else
3808 field |= TRB_TX_TYPE(TRB_DATA_OUT);
3809 }
3810 }
3811
3812 queue_trb(xhci, ep_ring, true,
3813 setup->bRequestType | setup->bRequest << 8 | le16_to_cpu(setup->wValue) << 16,
3814 le16_to_cpu(setup->wIndex) | le16_to_cpu(setup->wLength) << 16,
3815 TRB_LEN(8) | TRB_INTR_TARGET(0),
3816 /* Immediate data in pointer */
3817 field);
3818
3819 /* If there's data, queue data TRBs */
3820 /* Only set interrupt on short packet for IN endpoints */
3821 if (usb_urb_dir_in(urb))
3822 field = TRB_ISP | TRB_TYPE(TRB_DATA);
3823 else
3824 field = TRB_TYPE(TRB_DATA);
3825
3826 if (urb->transfer_buffer_length > 0) {
3827 u32 length_field, remainder;
3828 u64 addr;
3829
3830 if (xhci_urb_suitable_for_idt(urb)) {
3831 memcpy(&addr, urb->transfer_buffer,
3832 urb->transfer_buffer_length);
3833 le64_to_cpus(&addr);
3834 field |= TRB_IDT;
3835 } else {
3836 addr = (u64) urb->transfer_dma;
3837 }
3838
3839 remainder = xhci_td_remainder(xhci, 0,
3840 urb->transfer_buffer_length,
3841 urb->transfer_buffer_length,
3842 urb, 1);
3843 length_field = TRB_LEN(urb->transfer_buffer_length) |
3844 TRB_TD_SIZE(remainder) |
3845 TRB_INTR_TARGET(0);
3846 if (setup->bRequestType & USB_DIR_IN)
3847 field |= TRB_DIR_IN;
3848 queue_trb(xhci, ep_ring, true,
3849 lower_32_bits(addr),
3850 upper_32_bits(addr),
3851 length_field,
3852 field | ep_ring->cycle_state);
3853 }
3854
3855 /* Save the DMA address of the last TRB in the TD */
3856 td->last_trb = ep_ring->enqueue;
3857 td->last_trb_seg = ep_ring->enq_seg;
3858
3859 /* Queue status TRB - see Table 7 and sections 4.11.2.2 and 6.4.1.2.3 */
3860 /* If the device sent data, the status stage is an OUT transfer */
3861 if (urb->transfer_buffer_length > 0 && setup->bRequestType & USB_DIR_IN)
3862 field = 0;
3863 else
3864 field = TRB_DIR_IN;
3865 queue_trb(xhci, ep_ring, false,
3866 0,
3867 0,
3868 TRB_INTR_TARGET(0),
3869 /* Event on completion */
3870 field | TRB_IOC | TRB_TYPE(TRB_STATUS) | ep_ring->cycle_state);
3871
3872 giveback_first_trb(xhci, slot_id, ep_index, 0,
3873 start_cycle, start_trb);
3874 return 0;
3875}
3876
3877/*
3878 * The transfer burst count field of the isochronous TRB defines the number of
3879 * bursts that are required to move all packets in this TD. Only SuperSpeed
3880 * devices can burst up to bMaxBurst number of packets per service interval.
3881 * This field is zero based, meaning a value of zero in the field means one
3882 * burst. Basically, for everything but SuperSpeed devices, this field will be
3883 * zero. Only xHCI 1.0 host controllers support this field.
3884 */
3885static unsigned int xhci_get_burst_count(struct xhci_hcd *xhci,
3886 struct urb *urb, unsigned int total_packet_count)
3887{
3888 unsigned int max_burst;
3889
3890 if (xhci->hci_version < 0x100 || urb->dev->speed < USB_SPEED_SUPER)
3891 return 0;
3892
3893 max_burst = urb->ep->ss_ep_comp.bMaxBurst;
3894 return DIV_ROUND_UP(total_packet_count, max_burst + 1) - 1;
3895}
3896
3897/*
3898 * Returns the number of packets in the last "burst" of packets. This field is
3899 * valid for all speeds of devices. USB 2.0 devices can only do one "burst", so
3900 * the last burst packet count is equal to the total number of packets in the
3901 * TD. SuperSpeed endpoints can have up to 3 bursts. All but the last burst
3902 * must contain (bMaxBurst + 1) number of packets, but the last burst can
3903 * contain 1 to (bMaxBurst + 1) packets.
3904 */
3905static unsigned int xhci_get_last_burst_packet_count(struct xhci_hcd *xhci,
3906 struct urb *urb, unsigned int total_packet_count)
3907{
3908 unsigned int max_burst;
3909 unsigned int residue;
3910
3911 if (xhci->hci_version < 0x100)
3912 return 0;
3913
3914 if (urb->dev->speed >= USB_SPEED_SUPER) {
3915 /* bMaxBurst is zero based: 0 means 1 packet per burst */
3916 max_burst = urb->ep->ss_ep_comp.bMaxBurst;
3917 residue = total_packet_count % (max_burst + 1);
3918 /* If residue is zero, the last burst contains (max_burst + 1)
3919 * number of packets, but the TLBPC field is zero-based.
3920 */
3921 if (residue == 0)
3922 return max_burst;
3923 return residue - 1;
3924 }
3925 if (total_packet_count == 0)
3926 return 0;
3927 return total_packet_count - 1;
3928}
3929
3930/*
3931 * Calculates Frame ID field of the isochronous TRB identifies the
3932 * target frame that the Interval associated with this Isochronous
3933 * Transfer Descriptor will start on. Refer to 4.11.2.5 in 1.1 spec.
3934 *
3935 * Returns actual frame id on success, negative value on error.
3936 */
3937static int xhci_get_isoc_frame_id(struct xhci_hcd *xhci,
3938 struct urb *urb, int index)
3939{
3940 int start_frame, ist, ret = 0;
3941 int start_frame_id, end_frame_id, current_frame_id;
3942
3943 if (urb->dev->speed == USB_SPEED_LOW ||
3944 urb->dev->speed == USB_SPEED_FULL)
3945 start_frame = urb->start_frame + index * urb->interval;
3946 else
3947 start_frame = (urb->start_frame + index * urb->interval) >> 3;
3948
3949 /* Isochronous Scheduling Threshold (IST, bits 0~3 in HCSPARAMS2):
3950 *
3951 * If bit [3] of IST is cleared to '0', software can add a TRB no
3952 * later than IST[2:0] Microframes before that TRB is scheduled to
3953 * be executed.
3954 * If bit [3] of IST is set to '1', software can add a TRB no later
3955 * than IST[2:0] Frames before that TRB is scheduled to be executed.
3956 */
3957 ist = HCS_IST(xhci->hcs_params2) & 0x7;
3958 if (HCS_IST(xhci->hcs_params2) & (1 << 3))
3959 ist <<= 3;
3960
3961 /* Software shall not schedule an Isoch TD with a Frame ID value that
3962 * is less than the Start Frame ID or greater than the End Frame ID,
3963 * where:
3964 *
3965 * End Frame ID = (Current MFINDEX register value + 895 ms.) MOD 2048
3966 * Start Frame ID = (Current MFINDEX register value + IST + 1) MOD 2048
3967 *
3968 * Both the End Frame ID and Start Frame ID values are calculated
3969 * in microframes. When software determines the valid Frame ID value;
3970 * The End Frame ID value should be rounded down to the nearest Frame
3971 * boundary, and the Start Frame ID value should be rounded up to the
3972 * nearest Frame boundary.
3973 */
3974 current_frame_id = readl(&xhci->run_regs->microframe_index);
3975 start_frame_id = roundup(current_frame_id + ist + 1, 8);
3976 end_frame_id = rounddown(current_frame_id + 895 * 8, 8);
3977
3978 start_frame &= 0x7ff;
3979 start_frame_id = (start_frame_id >> 3) & 0x7ff;
3980 end_frame_id = (end_frame_id >> 3) & 0x7ff;
3981
3982 xhci_dbg(xhci, "%s: index %d, reg 0x%x start_frame_id 0x%x, end_frame_id 0x%x, start_frame 0x%x\n",
3983 __func__, index, readl(&xhci->run_regs->microframe_index),
3984 start_frame_id, end_frame_id, start_frame);
3985
3986 if (start_frame_id < end_frame_id) {
3987 if (start_frame > end_frame_id ||
3988 start_frame < start_frame_id)
3989 ret = -EINVAL;
3990 } else if (start_frame_id > end_frame_id) {
3991 if ((start_frame > end_frame_id &&
3992 start_frame < start_frame_id))
3993 ret = -EINVAL;
3994 } else {
3995 ret = -EINVAL;
3996 }
3997
3998 if (index == 0) {
3999 if (ret == -EINVAL || start_frame == start_frame_id) {
4000 start_frame = start_frame_id + 1;
4001 if (urb->dev->speed == USB_SPEED_LOW ||
4002 urb->dev->speed == USB_SPEED_FULL)
4003 urb->start_frame = start_frame;
4004 else
4005 urb->start_frame = start_frame << 3;
4006 ret = 0;
4007 }
4008 }
4009
4010 if (ret) {
4011 xhci_warn(xhci, "Frame ID %d (reg %d, index %d) beyond range (%d, %d)\n",
4012 start_frame, current_frame_id, index,
4013 start_frame_id, end_frame_id);
4014 xhci_warn(xhci, "Ignore frame ID field, use SIA bit instead\n");
4015 return ret;
4016 }
4017
4018 return start_frame;
4019}
4020
4021/* Check if we should generate event interrupt for a TD in an isoc URB */
4022static bool trb_block_event_intr(struct xhci_hcd *xhci, int num_tds, int i)
4023{
4024 if (xhci->hci_version < 0x100)
4025 return false;
4026 /* always generate an event interrupt for the last TD */
4027 if (i == num_tds - 1)
4028 return false;
4029 /*
4030 * If AVOID_BEI is set the host handles full event rings poorly,
4031 * generate an event at least every 8th TD to clear the event ring
4032 */
4033 if (i && xhci->quirks & XHCI_AVOID_BEI)
4034 return !!(i % xhci->isoc_bei_interval);
4035
4036 return true;
4037}
4038
4039/* This is for isoc transfer */
4040static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
4041 struct urb *urb, int slot_id, unsigned int ep_index)
4042{
4043 struct xhci_ring *ep_ring;
4044 struct urb_priv *urb_priv;
4045 struct xhci_td *td;
4046 int num_tds, trbs_per_td;
4047 struct xhci_generic_trb *start_trb;
4048 bool first_trb;
4049 int start_cycle;
4050 u32 field, length_field;
4051 int running_total, trb_buff_len, td_len, td_remain_len, ret;
4052 u64 start_addr, addr;
4053 int i, j;
4054 bool more_trbs_coming;
4055 struct xhci_virt_ep *xep;
4056 int frame_id;
4057
4058 xep = &xhci->devs[slot_id]->eps[ep_index];
4059 ep_ring = xhci->devs[slot_id]->eps[ep_index].ring;
4060
4061 num_tds = urb->number_of_packets;
4062 if (num_tds < 1) {
4063 xhci_dbg(xhci, "Isoc URB with zero packets?\n");
4064 return -EINVAL;
4065 }
4066 start_addr = (u64) urb->transfer_dma;
4067 start_trb = &ep_ring->enqueue->generic;
4068 start_cycle = ep_ring->cycle_state;
4069
4070 urb_priv = urb->hcpriv;
4071 /* Queue the TRBs for each TD, even if they are zero-length */
4072 for (i = 0; i < num_tds; i++) {
4073 unsigned int total_pkt_count, max_pkt;
4074 unsigned int burst_count, last_burst_pkt_count;
4075 u32 sia_frame_id;
4076
4077 first_trb = true;
4078 running_total = 0;
4079 addr = start_addr + urb->iso_frame_desc[i].offset;
4080 td_len = urb->iso_frame_desc[i].length;
4081 td_remain_len = td_len;
4082 max_pkt = usb_endpoint_maxp(&urb->ep->desc);
4083 total_pkt_count = DIV_ROUND_UP(td_len, max_pkt);
4084
4085 /* A zero-length transfer still involves at least one packet. */
4086 if (total_pkt_count == 0)
4087 total_pkt_count++;
4088 burst_count = xhci_get_burst_count(xhci, urb, total_pkt_count);
4089 last_burst_pkt_count = xhci_get_last_burst_packet_count(xhci,
4090 urb, total_pkt_count);
4091
4092 trbs_per_td = count_isoc_trbs_needed(urb, i);
4093
4094 ret = prepare_transfer(xhci, xhci->devs[slot_id], ep_index,
4095 urb->stream_id, trbs_per_td, urb, i, mem_flags);
4096 if (ret < 0) {
4097 if (i == 0)
4098 return ret;
4099 goto cleanup;
4100 }
4101 td = &urb_priv->td[i];
4102 td->num_trbs = trbs_per_td;
4103 /* use SIA as default, if frame id is used overwrite it */
4104 sia_frame_id = TRB_SIA;
4105 if (!(urb->transfer_flags & URB_ISO_ASAP) &&
4106 HCC_CFC(xhci->hcc_params)) {
4107 frame_id = xhci_get_isoc_frame_id(xhci, urb, i);
4108 if (frame_id >= 0)
4109 sia_frame_id = TRB_FRAME_ID(frame_id);
4110 }
4111 /*
4112 * Set isoc specific data for the first TRB in a TD.
4113 * Prevent HW from getting the TRBs by keeping the cycle state
4114 * inverted in the first TDs isoc TRB.
4115 */
4116 field = TRB_TYPE(TRB_ISOC) |
4117 TRB_TLBPC(last_burst_pkt_count) |
4118 sia_frame_id |
4119 (i ? ep_ring->cycle_state : !start_cycle);
4120
4121 /* xhci 1.1 with ETE uses TD_Size field for TBC, old is Rsvdz */
4122 if (!xep->use_extended_tbc)
4123 field |= TRB_TBC(burst_count);
4124
4125 /* fill the rest of the TRB fields, and remaining normal TRBs */
4126 for (j = 0; j < trbs_per_td; j++) {
4127 u32 remainder = 0;
4128
4129 /* only first TRB is isoc, overwrite otherwise */
4130 if (!first_trb)
4131 field = TRB_TYPE(TRB_NORMAL) |
4132 ep_ring->cycle_state;
4133
4134 /* Only set interrupt on short packet for IN EPs */
4135 if (usb_urb_dir_in(urb))
4136 field |= TRB_ISP;
4137
4138 /* Set the chain bit for all except the last TRB */
4139 if (j < trbs_per_td - 1) {
4140 more_trbs_coming = true;
4141 field |= TRB_CHAIN;
4142 } else {
4143 more_trbs_coming = false;
4144 td->last_trb = ep_ring->enqueue;
4145 td->last_trb_seg = ep_ring->enq_seg;
4146 field |= TRB_IOC;
4147 if (trb_block_event_intr(xhci, num_tds, i))
4148 field |= TRB_BEI;
4149 }
4150 /* Calculate TRB length */
4151 trb_buff_len = TRB_BUFF_LEN_UP_TO_BOUNDARY(addr);
4152 if (trb_buff_len > td_remain_len)
4153 trb_buff_len = td_remain_len;
4154
4155 /* Set the TRB length, TD size, & interrupter fields. */
4156 remainder = xhci_td_remainder(xhci, running_total,
4157 trb_buff_len, td_len,
4158 urb, more_trbs_coming);
4159
4160 length_field = TRB_LEN(trb_buff_len) |
4161 TRB_INTR_TARGET(0);
4162
4163 /* xhci 1.1 with ETE uses TD Size field for TBC */
4164 if (first_trb && xep->use_extended_tbc)
4165 length_field |= TRB_TD_SIZE_TBC(burst_count);
4166 else
4167 length_field |= TRB_TD_SIZE(remainder);
4168 first_trb = false;
4169
4170 queue_trb(xhci, ep_ring, more_trbs_coming,
4171 lower_32_bits(addr),
4172 upper_32_bits(addr),
4173 length_field,
4174 field);
4175 running_total += trb_buff_len;
4176
4177 addr += trb_buff_len;
4178 td_remain_len -= trb_buff_len;
4179 }
4180
4181 /* Check TD length */
4182 if (running_total != td_len) {
4183 xhci_err(xhci, "ISOC TD length unmatch\n");
4184 ret = -EINVAL;
4185 goto cleanup;
4186 }
4187 }
4188
4189 /* store the next frame id */
4190 if (HCC_CFC(xhci->hcc_params))
4191 xep->next_frame_id = urb->start_frame + num_tds * urb->interval;
4192
4193 if (xhci_to_hcd(xhci)->self.bandwidth_isoc_reqs == 0) {
4194 if (xhci->quirks & XHCI_AMD_PLL_FIX)
4195 usb_amd_quirk_pll_disable();
4196 }
4197 xhci_to_hcd(xhci)->self.bandwidth_isoc_reqs++;
4198
4199 giveback_first_trb(xhci, slot_id, ep_index, urb->stream_id,
4200 start_cycle, start_trb);
4201 return 0;
4202cleanup:
4203 /* Clean up a partially enqueued isoc transfer. */
4204
4205 for (i--; i >= 0; i--)
4206 list_del_init(&urb_priv->td[i].td_list);
4207
4208 /* Use the first TD as a temporary variable to turn the TDs we've queued
4209 * into No-ops with a software-owned cycle bit. That way the hardware
4210 * won't accidentally start executing bogus TDs when we partially
4211 * overwrite them. td->first_trb and td->start_seg are already set.
4212 */
4213 urb_priv->td[0].last_trb = ep_ring->enqueue;
4214 /* Every TRB except the first & last will have its cycle bit flipped. */
4215 td_to_noop(xhci, ep_ring, &urb_priv->td[0], true);
4216
4217 /* Reset the ring enqueue back to the first TRB and its cycle bit. */
4218 ep_ring->enqueue = urb_priv->td[0].first_trb;
4219 ep_ring->enq_seg = urb_priv->td[0].start_seg;
4220 ep_ring->cycle_state = start_cycle;
4221 usb_hcd_unlink_urb_from_ep(bus_to_hcd(urb->dev->bus), urb);
4222 return ret;
4223}
4224
4225/*
4226 * Check transfer ring to guarantee there is enough room for the urb.
4227 * Update ISO URB start_frame and interval.
4228 * Update interval as xhci_queue_intr_tx does. Use xhci frame_index to
4229 * update urb->start_frame if URB_ISO_ASAP is set in transfer_flags or
4230 * Contiguous Frame ID is not supported by HC.
4231 */
4232int xhci_queue_isoc_tx_prepare(struct xhci_hcd *xhci, gfp_t mem_flags,
4233 struct urb *urb, int slot_id, unsigned int ep_index)
4234{
4235 struct xhci_virt_device *xdev;
4236 struct xhci_ring *ep_ring;
4237 struct xhci_ep_ctx *ep_ctx;
4238 int start_frame;
4239 int num_tds, num_trbs, i;
4240 int ret;
4241 struct xhci_virt_ep *xep;
4242 int ist;
4243
4244 xdev = xhci->devs[slot_id];
4245 xep = &xhci->devs[slot_id]->eps[ep_index];
4246 ep_ring = xdev->eps[ep_index].ring;
4247 ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index);
4248
4249 num_trbs = 0;
4250 num_tds = urb->number_of_packets;
4251 for (i = 0; i < num_tds; i++)
4252 num_trbs += count_isoc_trbs_needed(urb, i);
4253
4254 /* Check the ring to guarantee there is enough room for the whole urb.
4255 * Do not insert any td of the urb to the ring if the check failed.
4256 */
4257 ret = prepare_ring(xhci, ep_ring, GET_EP_CTX_STATE(ep_ctx),
4258 num_trbs, mem_flags);
4259 if (ret)
4260 return ret;
4261
4262 /*
4263 * Check interval value. This should be done before we start to
4264 * calculate the start frame value.
4265 */
4266 check_interval(xhci, urb, ep_ctx);
4267
4268 /* Calculate the start frame and put it in urb->start_frame. */
4269 if (HCC_CFC(xhci->hcc_params) && !list_empty(&ep_ring->td_list)) {
4270 if (GET_EP_CTX_STATE(ep_ctx) == EP_STATE_RUNNING) {
4271 urb->start_frame = xep->next_frame_id;
4272 goto skip_start_over;
4273 }
4274 }
4275
4276 start_frame = readl(&xhci->run_regs->microframe_index);
4277 start_frame &= 0x3fff;
4278 /*
4279 * Round up to the next frame and consider the time before trb really
4280 * gets scheduled by hardare.
4281 */
4282 ist = HCS_IST(xhci->hcs_params2) & 0x7;
4283 if (HCS_IST(xhci->hcs_params2) & (1 << 3))
4284 ist <<= 3;
4285 start_frame += ist + XHCI_CFC_DELAY;
4286 start_frame = roundup(start_frame, 8);
4287
4288 /*
4289 * Round up to the next ESIT (Endpoint Service Interval Time) if ESIT
4290 * is greate than 8 microframes.
4291 */
4292 if (urb->dev->speed == USB_SPEED_LOW ||
4293 urb->dev->speed == USB_SPEED_FULL) {
4294 start_frame = roundup(start_frame, urb->interval << 3);
4295 urb->start_frame = start_frame >> 3;
4296 } else {
4297 start_frame = roundup(start_frame, urb->interval);
4298 urb->start_frame = start_frame;
4299 }
4300
4301skip_start_over:
4302
4303 return xhci_queue_isoc_tx(xhci, mem_flags, urb, slot_id, ep_index);
4304}
4305
4306/**** Command Ring Operations ****/
4307
4308/* Generic function for queueing a command TRB on the command ring.
4309 * Check to make sure there's room on the command ring for one command TRB.
4310 * Also check that there's room reserved for commands that must not fail.
4311 * If this is a command that must not fail, meaning command_must_succeed = TRUE,
4312 * then only check for the number of reserved spots.
4313 * Don't decrement xhci->cmd_ring_reserved_trbs after we've queued the TRB
4314 * because the command event handler may want to resubmit a failed command.
4315 */
4316static int queue_command(struct xhci_hcd *xhci, struct xhci_command *cmd,
4317 u32 field1, u32 field2,
4318 u32 field3, u32 field4, bool command_must_succeed)
4319{
4320 int reserved_trbs = xhci->cmd_ring_reserved_trbs;
4321 int ret;
4322
4323 if ((xhci->xhc_state & XHCI_STATE_DYING) ||
4324 (xhci->xhc_state & XHCI_STATE_HALTED)) {
4325 xhci_dbg(xhci, "xHCI dying or halted, can't queue_command\n");
4326 return -ESHUTDOWN;
4327 }
4328
4329 if (!command_must_succeed)
4330 reserved_trbs++;
4331
4332 ret = prepare_ring(xhci, xhci->cmd_ring, EP_STATE_RUNNING,
4333 reserved_trbs, GFP_ATOMIC);
4334 if (ret < 0) {
4335 xhci_err(xhci, "ERR: No room for command on command ring\n");
4336 if (command_must_succeed)
4337 xhci_err(xhci, "ERR: Reserved TRB counting for "
4338 "unfailable commands failed.\n");
4339 return ret;
4340 }
4341
4342 cmd->command_trb = xhci->cmd_ring->enqueue;
4343
4344 /* if there are no other commands queued we start the timeout timer */
4345 if (list_empty(&xhci->cmd_list)) {
4346 xhci->current_cmd = cmd;
4347 xhci_mod_cmd_timer(xhci);
4348 }
4349
4350 list_add_tail(&cmd->cmd_list, &xhci->cmd_list);
4351
4352 queue_trb(xhci, xhci->cmd_ring, false, field1, field2, field3,
4353 field4 | xhci->cmd_ring->cycle_state);
4354 return 0;
4355}
4356
4357/* Queue a slot enable or disable request on the command ring */
4358int xhci_queue_slot_control(struct xhci_hcd *xhci, struct xhci_command *cmd,
4359 u32 trb_type, u32 slot_id)
4360{
4361 return queue_command(xhci, cmd, 0, 0, 0,
4362 TRB_TYPE(trb_type) | SLOT_ID_FOR_TRB(slot_id), false);
4363}
4364
4365/* Queue an address device command TRB */
4366int xhci_queue_address_device(struct xhci_hcd *xhci, struct xhci_command *cmd,
4367 dma_addr_t in_ctx_ptr, u32 slot_id, enum xhci_setup_dev setup)
4368{
4369 return queue_command(xhci, cmd, lower_32_bits(in_ctx_ptr),
4370 upper_32_bits(in_ctx_ptr), 0,
4371 TRB_TYPE(TRB_ADDR_DEV) | SLOT_ID_FOR_TRB(slot_id)
4372 | (setup == SETUP_CONTEXT_ONLY ? TRB_BSR : 0), false);
4373}
4374
4375int xhci_queue_vendor_command(struct xhci_hcd *xhci, struct xhci_command *cmd,
4376 u32 field1, u32 field2, u32 field3, u32 field4)
4377{
4378 return queue_command(xhci, cmd, field1, field2, field3, field4, false);
4379}
4380
4381/* Queue a reset device command TRB */
4382int xhci_queue_reset_device(struct xhci_hcd *xhci, struct xhci_command *cmd,
4383 u32 slot_id)
4384{
4385 return queue_command(xhci, cmd, 0, 0, 0,
4386 TRB_TYPE(TRB_RESET_DEV) | SLOT_ID_FOR_TRB(slot_id),
4387 false);
4388}
4389
4390/* Queue a configure endpoint command TRB */
4391int xhci_queue_configure_endpoint(struct xhci_hcd *xhci,
4392 struct xhci_command *cmd, dma_addr_t in_ctx_ptr,
4393 u32 slot_id, bool command_must_succeed)
4394{
4395 return queue_command(xhci, cmd, lower_32_bits(in_ctx_ptr),
4396 upper_32_bits(in_ctx_ptr), 0,
4397 TRB_TYPE(TRB_CONFIG_EP) | SLOT_ID_FOR_TRB(slot_id),
4398 command_must_succeed);
4399}
4400
4401/* Queue an evaluate context command TRB */
4402int xhci_queue_evaluate_context(struct xhci_hcd *xhci, struct xhci_command *cmd,
4403 dma_addr_t in_ctx_ptr, u32 slot_id, bool command_must_succeed)
4404{
4405 return queue_command(xhci, cmd, lower_32_bits(in_ctx_ptr),
4406 upper_32_bits(in_ctx_ptr), 0,
4407 TRB_TYPE(TRB_EVAL_CONTEXT) | SLOT_ID_FOR_TRB(slot_id),
4408 command_must_succeed);
4409}
4410
4411/*
4412 * Suspend is set to indicate "Stop Endpoint Command" is being issued to stop
4413 * activity on an endpoint that is about to be suspended.
4414 */
4415int xhci_queue_stop_endpoint(struct xhci_hcd *xhci, struct xhci_command *cmd,
4416 int slot_id, unsigned int ep_index, int suspend)
4417{
4418 u32 trb_slot_id = SLOT_ID_FOR_TRB(slot_id);
4419 u32 trb_ep_index = EP_ID_FOR_TRB(ep_index);
4420 u32 type = TRB_TYPE(TRB_STOP_RING);
4421 u32 trb_suspend = SUSPEND_PORT_FOR_TRB(suspend);
4422
4423 return queue_command(xhci, cmd, 0, 0, 0,
4424 trb_slot_id | trb_ep_index | type | trb_suspend, false);
4425}
4426
4427int xhci_queue_reset_ep(struct xhci_hcd *xhci, struct xhci_command *cmd,
4428 int slot_id, unsigned int ep_index,
4429 enum xhci_ep_reset_type reset_type)
4430{
4431 u32 trb_slot_id = SLOT_ID_FOR_TRB(slot_id);
4432 u32 trb_ep_index = EP_ID_FOR_TRB(ep_index);
4433 u32 type = TRB_TYPE(TRB_RESET_EP);
4434
4435 if (reset_type == EP_SOFT_RESET)
4436 type |= TRB_TSP;
4437
4438 return queue_command(xhci, cmd, 0, 0, 0,
4439 trb_slot_id | trb_ep_index | type, false);
4440}
1/*
2 * xHCI host controller driver
3 *
4 * Copyright (C) 2008 Intel Corp.
5 *
6 * Author: Sarah Sharp
7 * Some code borrowed from the Linux EHCI driver.
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
12 *
13 * This program is distributed in the hope that it will be useful, but
14 * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
15 * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
16 * for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software Foundation,
20 * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
21 */
22
23/*
24 * Ring initialization rules:
25 * 1. Each segment is initialized to zero, except for link TRBs.
26 * 2. Ring cycle state = 0. This represents Producer Cycle State (PCS) or
27 * Consumer Cycle State (CCS), depending on ring function.
28 * 3. Enqueue pointer = dequeue pointer = address of first TRB in the segment.
29 *
30 * Ring behavior rules:
31 * 1. A ring is empty if enqueue == dequeue. This means there will always be at
32 * least one free TRB in the ring. This is useful if you want to turn that
33 * into a link TRB and expand the ring.
34 * 2. When incrementing an enqueue or dequeue pointer, if the next TRB is a
35 * link TRB, then load the pointer with the address in the link TRB. If the
36 * link TRB had its toggle bit set, you may need to update the ring cycle
37 * state (see cycle bit rules). You may have to do this multiple times
38 * until you reach a non-link TRB.
39 * 3. A ring is full if enqueue++ (for the definition of increment above)
40 * equals the dequeue pointer.
41 *
42 * Cycle bit rules:
43 * 1. When a consumer increments a dequeue pointer and encounters a toggle bit
44 * in a link TRB, it must toggle the ring cycle state.
45 * 2. When a producer increments an enqueue pointer and encounters a toggle bit
46 * in a link TRB, it must toggle the ring cycle state.
47 *
48 * Producer rules:
49 * 1. Check if ring is full before you enqueue.
50 * 2. Write the ring cycle state to the cycle bit in the TRB you're enqueuing.
51 * Update enqueue pointer between each write (which may update the ring
52 * cycle state).
53 * 3. Notify consumer. If SW is producer, it rings the doorbell for command
54 * and endpoint rings. If HC is the producer for the event ring,
55 * and it generates an interrupt according to interrupt modulation rules.
56 *
57 * Consumer rules:
58 * 1. Check if TRB belongs to you. If the cycle bit == your ring cycle state,
59 * the TRB is owned by the consumer.
60 * 2. Update dequeue pointer (which may update the ring cycle state) and
61 * continue processing TRBs until you reach a TRB which is not owned by you.
62 * 3. Notify the producer. SW is the consumer for the event ring, and it
63 * updates event ring dequeue pointer. HC is the consumer for the command and
64 * endpoint rings; it generates events on the event ring for these.
65 */
66
67#include <linux/scatterlist.h>
68#include <linux/slab.h>
69#include "xhci.h"
70
71static int handle_cmd_in_cmd_wait_list(struct xhci_hcd *xhci,
72 struct xhci_virt_device *virt_dev,
73 struct xhci_event_cmd *event);
74
75/*
76 * Returns zero if the TRB isn't in this segment, otherwise it returns the DMA
77 * address of the TRB.
78 */
79dma_addr_t xhci_trb_virt_to_dma(struct xhci_segment *seg,
80 union xhci_trb *trb)
81{
82 unsigned long segment_offset;
83
84 if (!seg || !trb || trb < seg->trbs)
85 return 0;
86 /* offset in TRBs */
87 segment_offset = trb - seg->trbs;
88 if (segment_offset > TRBS_PER_SEGMENT)
89 return 0;
90 return seg->dma + (segment_offset * sizeof(*trb));
91}
92
93/* Does this link TRB point to the first segment in a ring,
94 * or was the previous TRB the last TRB on the last segment in the ERST?
95 */
96static bool last_trb_on_last_seg(struct xhci_hcd *xhci, struct xhci_ring *ring,
97 struct xhci_segment *seg, union xhci_trb *trb)
98{
99 if (ring == xhci->event_ring)
100 return (trb == &seg->trbs[TRBS_PER_SEGMENT]) &&
101 (seg->next == xhci->event_ring->first_seg);
102 else
103 return le32_to_cpu(trb->link.control) & LINK_TOGGLE;
104}
105
106/* Is this TRB a link TRB or was the last TRB the last TRB in this event ring
107 * segment? I.e. would the updated event TRB pointer step off the end of the
108 * event seg?
109 */
110static int last_trb(struct xhci_hcd *xhci, struct xhci_ring *ring,
111 struct xhci_segment *seg, union xhci_trb *trb)
112{
113 if (ring == xhci->event_ring)
114 return trb == &seg->trbs[TRBS_PER_SEGMENT];
115 else
116 return TRB_TYPE_LINK_LE32(trb->link.control);
117}
118
119static int enqueue_is_link_trb(struct xhci_ring *ring)
120{
121 struct xhci_link_trb *link = &ring->enqueue->link;
122 return TRB_TYPE_LINK_LE32(link->control);
123}
124
125/* Updates trb to point to the next TRB in the ring, and updates seg if the next
126 * TRB is in a new segment. This does not skip over link TRBs, and it does not
127 * effect the ring dequeue or enqueue pointers.
128 */
129static void next_trb(struct xhci_hcd *xhci,
130 struct xhci_ring *ring,
131 struct xhci_segment **seg,
132 union xhci_trb **trb)
133{
134 if (last_trb(xhci, ring, *seg, *trb)) {
135 *seg = (*seg)->next;
136 *trb = ((*seg)->trbs);
137 } else {
138 (*trb)++;
139 }
140}
141
142/*
143 * See Cycle bit rules. SW is the consumer for the event ring only.
144 * Don't make a ring full of link TRBs. That would be dumb and this would loop.
145 */
146static void inc_deq(struct xhci_hcd *xhci, struct xhci_ring *ring)
147{
148 unsigned long long addr;
149
150 ring->deq_updates++;
151
152 /*
153 * If this is not event ring, and the dequeue pointer
154 * is not on a link TRB, there is one more usable TRB
155 */
156 if (ring->type != TYPE_EVENT &&
157 !last_trb(xhci, ring, ring->deq_seg, ring->dequeue))
158 ring->num_trbs_free++;
159
160 do {
161 /*
162 * Update the dequeue pointer further if that was a link TRB or
163 * we're at the end of an event ring segment (which doesn't have
164 * link TRBS)
165 */
166 if (last_trb(xhci, ring, ring->deq_seg, ring->dequeue)) {
167 if (ring->type == TYPE_EVENT &&
168 last_trb_on_last_seg(xhci, ring,
169 ring->deq_seg, ring->dequeue)) {
170 ring->cycle_state = (ring->cycle_state ? 0 : 1);
171 }
172 ring->deq_seg = ring->deq_seg->next;
173 ring->dequeue = ring->deq_seg->trbs;
174 } else {
175 ring->dequeue++;
176 }
177 } while (last_trb(xhci, ring, ring->deq_seg, ring->dequeue));
178
179 addr = (unsigned long long) xhci_trb_virt_to_dma(ring->deq_seg, ring->dequeue);
180}
181
182/*
183 * See Cycle bit rules. SW is the consumer for the event ring only.
184 * Don't make a ring full of link TRBs. That would be dumb and this would loop.
185 *
186 * If we've just enqueued a TRB that is in the middle of a TD (meaning the
187 * chain bit is set), then set the chain bit in all the following link TRBs.
188 * If we've enqueued the last TRB in a TD, make sure the following link TRBs
189 * have their chain bit cleared (so that each Link TRB is a separate TD).
190 *
191 * Section 6.4.4.1 of the 0.95 spec says link TRBs cannot have the chain bit
192 * set, but other sections talk about dealing with the chain bit set. This was
193 * fixed in the 0.96 specification errata, but we have to assume that all 0.95
194 * xHCI hardware can't handle the chain bit being cleared on a link TRB.
195 *
196 * @more_trbs_coming: Will you enqueue more TRBs before calling
197 * prepare_transfer()?
198 */
199static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring,
200 bool more_trbs_coming)
201{
202 u32 chain;
203 union xhci_trb *next;
204 unsigned long long addr;
205
206 chain = le32_to_cpu(ring->enqueue->generic.field[3]) & TRB_CHAIN;
207 /* If this is not event ring, there is one less usable TRB */
208 if (ring->type != TYPE_EVENT &&
209 !last_trb(xhci, ring, ring->enq_seg, ring->enqueue))
210 ring->num_trbs_free--;
211 next = ++(ring->enqueue);
212
213 ring->enq_updates++;
214 /* Update the dequeue pointer further if that was a link TRB or we're at
215 * the end of an event ring segment (which doesn't have link TRBS)
216 */
217 while (last_trb(xhci, ring, ring->enq_seg, next)) {
218 if (ring->type != TYPE_EVENT) {
219 /*
220 * If the caller doesn't plan on enqueueing more
221 * TDs before ringing the doorbell, then we
222 * don't want to give the link TRB to the
223 * hardware just yet. We'll give the link TRB
224 * back in prepare_ring() just before we enqueue
225 * the TD at the top of the ring.
226 */
227 if (!chain && !more_trbs_coming)
228 break;
229
230 /* If we're not dealing with 0.95 hardware or
231 * isoc rings on AMD 0.96 host,
232 * carry over the chain bit of the previous TRB
233 * (which may mean the chain bit is cleared).
234 */
235 if (!(ring->type == TYPE_ISOC &&
236 (xhci->quirks & XHCI_AMD_0x96_HOST))
237 && !xhci_link_trb_quirk(xhci)) {
238 next->link.control &=
239 cpu_to_le32(~TRB_CHAIN);
240 next->link.control |=
241 cpu_to_le32(chain);
242 }
243 /* Give this link TRB to the hardware */
244 wmb();
245 next->link.control ^= cpu_to_le32(TRB_CYCLE);
246
247 /* Toggle the cycle bit after the last ring segment. */
248 if (last_trb_on_last_seg(xhci, ring, ring->enq_seg, next)) {
249 ring->cycle_state = (ring->cycle_state ? 0 : 1);
250 }
251 }
252 ring->enq_seg = ring->enq_seg->next;
253 ring->enqueue = ring->enq_seg->trbs;
254 next = ring->enqueue;
255 }
256 addr = (unsigned long long) xhci_trb_virt_to_dma(ring->enq_seg, ring->enqueue);
257}
258
259/*
260 * Check to see if there's room to enqueue num_trbs on the ring and make sure
261 * enqueue pointer will not advance into dequeue segment. See rules above.
262 */
263static inline int room_on_ring(struct xhci_hcd *xhci, struct xhci_ring *ring,
264 unsigned int num_trbs)
265{
266 int num_trbs_in_deq_seg;
267
268 if (ring->num_trbs_free < num_trbs)
269 return 0;
270
271 if (ring->type != TYPE_COMMAND && ring->type != TYPE_EVENT) {
272 num_trbs_in_deq_seg = ring->dequeue - ring->deq_seg->trbs;
273 if (ring->num_trbs_free < num_trbs + num_trbs_in_deq_seg)
274 return 0;
275 }
276
277 return 1;
278}
279
280/* Ring the host controller doorbell after placing a command on the ring */
281void xhci_ring_cmd_db(struct xhci_hcd *xhci)
282{
283 if (!(xhci->cmd_ring_state & CMD_RING_STATE_RUNNING))
284 return;
285
286 xhci_dbg(xhci, "// Ding dong!\n");
287 xhci_writel(xhci, DB_VALUE_HOST, &xhci->dba->doorbell[0]);
288 /* Flush PCI posted writes */
289 xhci_readl(xhci, &xhci->dba->doorbell[0]);
290}
291
292static int xhci_abort_cmd_ring(struct xhci_hcd *xhci)
293{
294 u64 temp_64;
295 int ret;
296
297 xhci_dbg(xhci, "Abort command ring\n");
298
299 if (!(xhci->cmd_ring_state & CMD_RING_STATE_RUNNING)) {
300 xhci_dbg(xhci, "The command ring isn't running, "
301 "Have the command ring been stopped?\n");
302 return 0;
303 }
304
305 temp_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
306 if (!(temp_64 & CMD_RING_RUNNING)) {
307 xhci_dbg(xhci, "Command ring had been stopped\n");
308 return 0;
309 }
310 xhci->cmd_ring_state = CMD_RING_STATE_ABORTED;
311 xhci_write_64(xhci, temp_64 | CMD_RING_ABORT,
312 &xhci->op_regs->cmd_ring);
313
314 /* Section 4.6.1.2 of xHCI 1.0 spec says software should
315 * time the completion od all xHCI commands, including
316 * the Command Abort operation. If software doesn't see
317 * CRR negated in a timely manner (e.g. longer than 5
318 * seconds), then it should assume that the there are
319 * larger problems with the xHC and assert HCRST.
320 */
321 ret = handshake(xhci, &xhci->op_regs->cmd_ring,
322 CMD_RING_RUNNING, 0, 5 * 1000 * 1000);
323 if (ret < 0) {
324 xhci_err(xhci, "Stopped the command ring failed, "
325 "maybe the host is dead\n");
326 xhci->xhc_state |= XHCI_STATE_DYING;
327 xhci_quiesce(xhci);
328 xhci_halt(xhci);
329 return -ESHUTDOWN;
330 }
331
332 return 0;
333}
334
335static int xhci_queue_cd(struct xhci_hcd *xhci,
336 struct xhci_command *command,
337 union xhci_trb *cmd_trb)
338{
339 struct xhci_cd *cd;
340 cd = kzalloc(sizeof(struct xhci_cd), GFP_ATOMIC);
341 if (!cd)
342 return -ENOMEM;
343 INIT_LIST_HEAD(&cd->cancel_cmd_list);
344
345 cd->command = command;
346 cd->cmd_trb = cmd_trb;
347 list_add_tail(&cd->cancel_cmd_list, &xhci->cancel_cmd_list);
348
349 return 0;
350}
351
352/*
353 * Cancel the command which has issue.
354 *
355 * Some commands may hang due to waiting for acknowledgement from
356 * usb device. It is outside of the xHC's ability to control and
357 * will cause the command ring is blocked. When it occurs software
358 * should intervene to recover the command ring.
359 * See Section 4.6.1.1 and 4.6.1.2
360 */
361int xhci_cancel_cmd(struct xhci_hcd *xhci, struct xhci_command *command,
362 union xhci_trb *cmd_trb)
363{
364 int retval = 0;
365 unsigned long flags;
366
367 spin_lock_irqsave(&xhci->lock, flags);
368
369 if (xhci->xhc_state & XHCI_STATE_DYING) {
370 xhci_warn(xhci, "Abort the command ring,"
371 " but the xHCI is dead.\n");
372 retval = -ESHUTDOWN;
373 goto fail;
374 }
375
376 /* queue the cmd desriptor to cancel_cmd_list */
377 retval = xhci_queue_cd(xhci, command, cmd_trb);
378 if (retval) {
379 xhci_warn(xhci, "Queuing command descriptor failed.\n");
380 goto fail;
381 }
382
383 /* abort command ring */
384 retval = xhci_abort_cmd_ring(xhci);
385 if (retval) {
386 xhci_err(xhci, "Abort command ring failed\n");
387 if (unlikely(retval == -ESHUTDOWN)) {
388 spin_unlock_irqrestore(&xhci->lock, flags);
389 usb_hc_died(xhci_to_hcd(xhci)->primary_hcd);
390 xhci_dbg(xhci, "xHCI host controller is dead.\n");
391 return retval;
392 }
393 }
394
395fail:
396 spin_unlock_irqrestore(&xhci->lock, flags);
397 return retval;
398}
399
400void xhci_ring_ep_doorbell(struct xhci_hcd *xhci,
401 unsigned int slot_id,
402 unsigned int ep_index,
403 unsigned int stream_id)
404{
405 __le32 __iomem *db_addr = &xhci->dba->doorbell[slot_id];
406 struct xhci_virt_ep *ep = &xhci->devs[slot_id]->eps[ep_index];
407 unsigned int ep_state = ep->ep_state;
408
409 /* Don't ring the doorbell for this endpoint if there are pending
410 * cancellations because we don't want to interrupt processing.
411 * We don't want to restart any stream rings if there's a set dequeue
412 * pointer command pending because the device can choose to start any
413 * stream once the endpoint is on the HW schedule.
414 * FIXME - check all the stream rings for pending cancellations.
415 */
416 if ((ep_state & EP_HALT_PENDING) || (ep_state & SET_DEQ_PENDING) ||
417 (ep_state & EP_HALTED))
418 return;
419 xhci_writel(xhci, DB_VALUE(ep_index, stream_id), db_addr);
420 /* The CPU has better things to do at this point than wait for a
421 * write-posting flush. It'll get there soon enough.
422 */
423}
424
425/* Ring the doorbell for any rings with pending URBs */
426static void ring_doorbell_for_active_rings(struct xhci_hcd *xhci,
427 unsigned int slot_id,
428 unsigned int ep_index)
429{
430 unsigned int stream_id;
431 struct xhci_virt_ep *ep;
432
433 ep = &xhci->devs[slot_id]->eps[ep_index];
434
435 /* A ring has pending URBs if its TD list is not empty */
436 if (!(ep->ep_state & EP_HAS_STREAMS)) {
437 if (!(list_empty(&ep->ring->td_list)))
438 xhci_ring_ep_doorbell(xhci, slot_id, ep_index, 0);
439 return;
440 }
441
442 for (stream_id = 1; stream_id < ep->stream_info->num_streams;
443 stream_id++) {
444 struct xhci_stream_info *stream_info = ep->stream_info;
445 if (!list_empty(&stream_info->stream_rings[stream_id]->td_list))
446 xhci_ring_ep_doorbell(xhci, slot_id, ep_index,
447 stream_id);
448 }
449}
450
451/*
452 * Find the segment that trb is in. Start searching in start_seg.
453 * If we must move past a segment that has a link TRB with a toggle cycle state
454 * bit set, then we will toggle the value pointed at by cycle_state.
455 */
456static struct xhci_segment *find_trb_seg(
457 struct xhci_segment *start_seg,
458 union xhci_trb *trb, int *cycle_state)
459{
460 struct xhci_segment *cur_seg = start_seg;
461 struct xhci_generic_trb *generic_trb;
462
463 while (cur_seg->trbs > trb ||
464 &cur_seg->trbs[TRBS_PER_SEGMENT - 1] < trb) {
465 generic_trb = &cur_seg->trbs[TRBS_PER_SEGMENT - 1].generic;
466 if (generic_trb->field[3] & cpu_to_le32(LINK_TOGGLE))
467 *cycle_state ^= 0x1;
468 cur_seg = cur_seg->next;
469 if (cur_seg == start_seg)
470 /* Looped over the entire list. Oops! */
471 return NULL;
472 }
473 return cur_seg;
474}
475
476
477static struct xhci_ring *xhci_triad_to_transfer_ring(struct xhci_hcd *xhci,
478 unsigned int slot_id, unsigned int ep_index,
479 unsigned int stream_id)
480{
481 struct xhci_virt_ep *ep;
482
483 ep = &xhci->devs[slot_id]->eps[ep_index];
484 /* Common case: no streams */
485 if (!(ep->ep_state & EP_HAS_STREAMS))
486 return ep->ring;
487
488 if (stream_id == 0) {
489 xhci_warn(xhci,
490 "WARN: Slot ID %u, ep index %u has streams, "
491 "but URB has no stream ID.\n",
492 slot_id, ep_index);
493 return NULL;
494 }
495
496 if (stream_id < ep->stream_info->num_streams)
497 return ep->stream_info->stream_rings[stream_id];
498
499 xhci_warn(xhci,
500 "WARN: Slot ID %u, ep index %u has "
501 "stream IDs 1 to %u allocated, "
502 "but stream ID %u is requested.\n",
503 slot_id, ep_index,
504 ep->stream_info->num_streams - 1,
505 stream_id);
506 return NULL;
507}
508
509/* Get the right ring for the given URB.
510 * If the endpoint supports streams, boundary check the URB's stream ID.
511 * If the endpoint doesn't support streams, return the singular endpoint ring.
512 */
513static struct xhci_ring *xhci_urb_to_transfer_ring(struct xhci_hcd *xhci,
514 struct urb *urb)
515{
516 return xhci_triad_to_transfer_ring(xhci, urb->dev->slot_id,
517 xhci_get_endpoint_index(&urb->ep->desc), urb->stream_id);
518}
519
520/*
521 * Move the xHC's endpoint ring dequeue pointer past cur_td.
522 * Record the new state of the xHC's endpoint ring dequeue segment,
523 * dequeue pointer, and new consumer cycle state in state.
524 * Update our internal representation of the ring's dequeue pointer.
525 *
526 * We do this in three jumps:
527 * - First we update our new ring state to be the same as when the xHC stopped.
528 * - Then we traverse the ring to find the segment that contains
529 * the last TRB in the TD. We toggle the xHC's new cycle state when we pass
530 * any link TRBs with the toggle cycle bit set.
531 * - Finally we move the dequeue state one TRB further, toggling the cycle bit
532 * if we've moved it past a link TRB with the toggle cycle bit set.
533 *
534 * Some of the uses of xhci_generic_trb are grotty, but if they're done
535 * with correct __le32 accesses they should work fine. Only users of this are
536 * in here.
537 */
538void xhci_find_new_dequeue_state(struct xhci_hcd *xhci,
539 unsigned int slot_id, unsigned int ep_index,
540 unsigned int stream_id, struct xhci_td *cur_td,
541 struct xhci_dequeue_state *state)
542{
543 struct xhci_virt_device *dev = xhci->devs[slot_id];
544 struct xhci_ring *ep_ring;
545 struct xhci_generic_trb *trb;
546 struct xhci_ep_ctx *ep_ctx;
547 dma_addr_t addr;
548
549 ep_ring = xhci_triad_to_transfer_ring(xhci, slot_id,
550 ep_index, stream_id);
551 if (!ep_ring) {
552 xhci_warn(xhci, "WARN can't find new dequeue state "
553 "for invalid stream ID %u.\n",
554 stream_id);
555 return;
556 }
557 state->new_cycle_state = 0;
558 xhci_dbg(xhci, "Finding segment containing stopped TRB.\n");
559 state->new_deq_seg = find_trb_seg(cur_td->start_seg,
560 dev->eps[ep_index].stopped_trb,
561 &state->new_cycle_state);
562 if (!state->new_deq_seg) {
563 WARN_ON(1);
564 return;
565 }
566
567 /* Dig out the cycle state saved by the xHC during the stop ep cmd */
568 xhci_dbg(xhci, "Finding endpoint context\n");
569 ep_ctx = xhci_get_ep_ctx(xhci, dev->out_ctx, ep_index);
570 state->new_cycle_state = 0x1 & le64_to_cpu(ep_ctx->deq);
571
572 state->new_deq_ptr = cur_td->last_trb;
573 xhci_dbg(xhci, "Finding segment containing last TRB in TD.\n");
574 state->new_deq_seg = find_trb_seg(state->new_deq_seg,
575 state->new_deq_ptr,
576 &state->new_cycle_state);
577 if (!state->new_deq_seg) {
578 WARN_ON(1);
579 return;
580 }
581
582 trb = &state->new_deq_ptr->generic;
583 if (TRB_TYPE_LINK_LE32(trb->field[3]) &&
584 (trb->field[3] & cpu_to_le32(LINK_TOGGLE)))
585 state->new_cycle_state ^= 0x1;
586 next_trb(xhci, ep_ring, &state->new_deq_seg, &state->new_deq_ptr);
587
588 /*
589 * If there is only one segment in a ring, find_trb_seg()'s while loop
590 * will not run, and it will return before it has a chance to see if it
591 * needs to toggle the cycle bit. It can't tell if the stalled transfer
592 * ended just before the link TRB on a one-segment ring, or if the TD
593 * wrapped around the top of the ring, because it doesn't have the TD in
594 * question. Look for the one-segment case where stalled TRB's address
595 * is greater than the new dequeue pointer address.
596 */
597 if (ep_ring->first_seg == ep_ring->first_seg->next &&
598 state->new_deq_ptr < dev->eps[ep_index].stopped_trb)
599 state->new_cycle_state ^= 0x1;
600 xhci_dbg(xhci, "Cycle state = 0x%x\n", state->new_cycle_state);
601
602 /* Don't update the ring cycle state for the producer (us). */
603 xhci_dbg(xhci, "New dequeue segment = %p (virtual)\n",
604 state->new_deq_seg);
605 addr = xhci_trb_virt_to_dma(state->new_deq_seg, state->new_deq_ptr);
606 xhci_dbg(xhci, "New dequeue pointer = 0x%llx (DMA)\n",
607 (unsigned long long) addr);
608}
609
610/* flip_cycle means flip the cycle bit of all but the first and last TRB.
611 * (The last TRB actually points to the ring enqueue pointer, which is not part
612 * of this TD.) This is used to remove partially enqueued isoc TDs from a ring.
613 */
614static void td_to_noop(struct xhci_hcd *xhci, struct xhci_ring *ep_ring,
615 struct xhci_td *cur_td, bool flip_cycle)
616{
617 struct xhci_segment *cur_seg;
618 union xhci_trb *cur_trb;
619
620 for (cur_seg = cur_td->start_seg, cur_trb = cur_td->first_trb;
621 true;
622 next_trb(xhci, ep_ring, &cur_seg, &cur_trb)) {
623 if (TRB_TYPE_LINK_LE32(cur_trb->generic.field[3])) {
624 /* Unchain any chained Link TRBs, but
625 * leave the pointers intact.
626 */
627 cur_trb->generic.field[3] &= cpu_to_le32(~TRB_CHAIN);
628 /* Flip the cycle bit (link TRBs can't be the first
629 * or last TRB).
630 */
631 if (flip_cycle)
632 cur_trb->generic.field[3] ^=
633 cpu_to_le32(TRB_CYCLE);
634 xhci_dbg(xhci, "Cancel (unchain) link TRB\n");
635 xhci_dbg(xhci, "Address = %p (0x%llx dma); "
636 "in seg %p (0x%llx dma)\n",
637 cur_trb,
638 (unsigned long long)xhci_trb_virt_to_dma(cur_seg, cur_trb),
639 cur_seg,
640 (unsigned long long)cur_seg->dma);
641 } else {
642 cur_trb->generic.field[0] = 0;
643 cur_trb->generic.field[1] = 0;
644 cur_trb->generic.field[2] = 0;
645 /* Preserve only the cycle bit of this TRB */
646 cur_trb->generic.field[3] &= cpu_to_le32(TRB_CYCLE);
647 /* Flip the cycle bit except on the first or last TRB */
648 if (flip_cycle && cur_trb != cur_td->first_trb &&
649 cur_trb != cur_td->last_trb)
650 cur_trb->generic.field[3] ^=
651 cpu_to_le32(TRB_CYCLE);
652 cur_trb->generic.field[3] |= cpu_to_le32(
653 TRB_TYPE(TRB_TR_NOOP));
654 xhci_dbg(xhci, "TRB to noop at offset 0x%llx\n",
655 (unsigned long long)
656 xhci_trb_virt_to_dma(cur_seg, cur_trb));
657 }
658 if (cur_trb == cur_td->last_trb)
659 break;
660 }
661}
662
663static int queue_set_tr_deq(struct xhci_hcd *xhci, int slot_id,
664 unsigned int ep_index, unsigned int stream_id,
665 struct xhci_segment *deq_seg,
666 union xhci_trb *deq_ptr, u32 cycle_state);
667
668void xhci_queue_new_dequeue_state(struct xhci_hcd *xhci,
669 unsigned int slot_id, unsigned int ep_index,
670 unsigned int stream_id,
671 struct xhci_dequeue_state *deq_state)
672{
673 struct xhci_virt_ep *ep = &xhci->devs[slot_id]->eps[ep_index];
674
675 xhci_dbg(xhci, "Set TR Deq Ptr cmd, new deq seg = %p (0x%llx dma), "
676 "new deq ptr = %p (0x%llx dma), new cycle = %u\n",
677 deq_state->new_deq_seg,
678 (unsigned long long)deq_state->new_deq_seg->dma,
679 deq_state->new_deq_ptr,
680 (unsigned long long)xhci_trb_virt_to_dma(deq_state->new_deq_seg, deq_state->new_deq_ptr),
681 deq_state->new_cycle_state);
682 queue_set_tr_deq(xhci, slot_id, ep_index, stream_id,
683 deq_state->new_deq_seg,
684 deq_state->new_deq_ptr,
685 (u32) deq_state->new_cycle_state);
686 /* Stop the TD queueing code from ringing the doorbell until
687 * this command completes. The HC won't set the dequeue pointer
688 * if the ring is running, and ringing the doorbell starts the
689 * ring running.
690 */
691 ep->ep_state |= SET_DEQ_PENDING;
692}
693
694static void xhci_stop_watchdog_timer_in_irq(struct xhci_hcd *xhci,
695 struct xhci_virt_ep *ep)
696{
697 ep->ep_state &= ~EP_HALT_PENDING;
698 /* Can't del_timer_sync in interrupt, so we attempt to cancel. If the
699 * timer is running on another CPU, we don't decrement stop_cmds_pending
700 * (since we didn't successfully stop the watchdog timer).
701 */
702 if (del_timer(&ep->stop_cmd_timer))
703 ep->stop_cmds_pending--;
704}
705
706/* Must be called with xhci->lock held in interrupt context */
707static void xhci_giveback_urb_in_irq(struct xhci_hcd *xhci,
708 struct xhci_td *cur_td, int status, char *adjective)
709{
710 struct usb_hcd *hcd;
711 struct urb *urb;
712 struct urb_priv *urb_priv;
713
714 urb = cur_td->urb;
715 urb_priv = urb->hcpriv;
716 urb_priv->td_cnt++;
717 hcd = bus_to_hcd(urb->dev->bus);
718
719 /* Only giveback urb when this is the last td in urb */
720 if (urb_priv->td_cnt == urb_priv->length) {
721 if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
722 xhci_to_hcd(xhci)->self.bandwidth_isoc_reqs--;
723 if (xhci_to_hcd(xhci)->self.bandwidth_isoc_reqs == 0) {
724 if (xhci->quirks & XHCI_AMD_PLL_FIX)
725 usb_amd_quirk_pll_enable();
726 }
727 }
728 usb_hcd_unlink_urb_from_ep(hcd, urb);
729
730 spin_unlock(&xhci->lock);
731 usb_hcd_giveback_urb(hcd, urb, status);
732 xhci_urb_free_priv(xhci, urb_priv);
733 spin_lock(&xhci->lock);
734 }
735}
736
737/*
738 * When we get a command completion for a Stop Endpoint Command, we need to
739 * unlink any cancelled TDs from the ring. There are two ways to do that:
740 *
741 * 1. If the HW was in the middle of processing the TD that needs to be
742 * cancelled, then we must move the ring's dequeue pointer past the last TRB
743 * in the TD with a Set Dequeue Pointer Command.
744 * 2. Otherwise, we turn all the TRBs in the TD into No-op TRBs (with the chain
745 * bit cleared) so that the HW will skip over them.
746 */
747static void handle_stopped_endpoint(struct xhci_hcd *xhci,
748 union xhci_trb *trb, struct xhci_event_cmd *event)
749{
750 unsigned int slot_id;
751 unsigned int ep_index;
752 struct xhci_virt_device *virt_dev;
753 struct xhci_ring *ep_ring;
754 struct xhci_virt_ep *ep;
755 struct list_head *entry;
756 struct xhci_td *cur_td = NULL;
757 struct xhci_td *last_unlinked_td;
758
759 struct xhci_dequeue_state deq_state;
760
761 if (unlikely(TRB_TO_SUSPEND_PORT(
762 le32_to_cpu(xhci->cmd_ring->dequeue->generic.field[3])))) {
763 slot_id = TRB_TO_SLOT_ID(
764 le32_to_cpu(xhci->cmd_ring->dequeue->generic.field[3]));
765 virt_dev = xhci->devs[slot_id];
766 if (virt_dev)
767 handle_cmd_in_cmd_wait_list(xhci, virt_dev,
768 event);
769 else
770 xhci_warn(xhci, "Stop endpoint command "
771 "completion for disabled slot %u\n",
772 slot_id);
773 return;
774 }
775
776 memset(&deq_state, 0, sizeof(deq_state));
777 slot_id = TRB_TO_SLOT_ID(le32_to_cpu(trb->generic.field[3]));
778 ep_index = TRB_TO_EP_INDEX(le32_to_cpu(trb->generic.field[3]));
779 ep = &xhci->devs[slot_id]->eps[ep_index];
780
781 if (list_empty(&ep->cancelled_td_list)) {
782 xhci_stop_watchdog_timer_in_irq(xhci, ep);
783 ep->stopped_td = NULL;
784 ep->stopped_trb = NULL;
785 ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
786 return;
787 }
788
789 /* Fix up the ep ring first, so HW stops executing cancelled TDs.
790 * We have the xHCI lock, so nothing can modify this list until we drop
791 * it. We're also in the event handler, so we can't get re-interrupted
792 * if another Stop Endpoint command completes
793 */
794 list_for_each(entry, &ep->cancelled_td_list) {
795 cur_td = list_entry(entry, struct xhci_td, cancelled_td_list);
796 xhci_dbg(xhci, "Removing canceled TD starting at 0x%llx (dma).\n",
797 (unsigned long long)xhci_trb_virt_to_dma(
798 cur_td->start_seg, cur_td->first_trb));
799 ep_ring = xhci_urb_to_transfer_ring(xhci, cur_td->urb);
800 if (!ep_ring) {
801 /* This shouldn't happen unless a driver is mucking
802 * with the stream ID after submission. This will
803 * leave the TD on the hardware ring, and the hardware
804 * will try to execute it, and may access a buffer
805 * that has already been freed. In the best case, the
806 * hardware will execute it, and the event handler will
807 * ignore the completion event for that TD, since it was
808 * removed from the td_list for that endpoint. In
809 * short, don't muck with the stream ID after
810 * submission.
811 */
812 xhci_warn(xhci, "WARN Cancelled URB %p "
813 "has invalid stream ID %u.\n",
814 cur_td->urb,
815 cur_td->urb->stream_id);
816 goto remove_finished_td;
817 }
818 /*
819 * If we stopped on the TD we need to cancel, then we have to
820 * move the xHC endpoint ring dequeue pointer past this TD.
821 */
822 if (cur_td == ep->stopped_td)
823 xhci_find_new_dequeue_state(xhci, slot_id, ep_index,
824 cur_td->urb->stream_id,
825 cur_td, &deq_state);
826 else
827 td_to_noop(xhci, ep_ring, cur_td, false);
828remove_finished_td:
829 /*
830 * The event handler won't see a completion for this TD anymore,
831 * so remove it from the endpoint ring's TD list. Keep it in
832 * the cancelled TD list for URB completion later.
833 */
834 list_del_init(&cur_td->td_list);
835 }
836 last_unlinked_td = cur_td;
837 xhci_stop_watchdog_timer_in_irq(xhci, ep);
838
839 /* If necessary, queue a Set Transfer Ring Dequeue Pointer command */
840 if (deq_state.new_deq_ptr && deq_state.new_deq_seg) {
841 xhci_queue_new_dequeue_state(xhci,
842 slot_id, ep_index,
843 ep->stopped_td->urb->stream_id,
844 &deq_state);
845 xhci_ring_cmd_db(xhci);
846 } else {
847 /* Otherwise ring the doorbell(s) to restart queued transfers */
848 ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
849 }
850 ep->stopped_td = NULL;
851 ep->stopped_trb = NULL;
852
853 /*
854 * Drop the lock and complete the URBs in the cancelled TD list.
855 * New TDs to be cancelled might be added to the end of the list before
856 * we can complete all the URBs for the TDs we already unlinked.
857 * So stop when we've completed the URB for the last TD we unlinked.
858 */
859 do {
860 cur_td = list_entry(ep->cancelled_td_list.next,
861 struct xhci_td, cancelled_td_list);
862 list_del_init(&cur_td->cancelled_td_list);
863
864 /* Clean up the cancelled URB */
865 /* Doesn't matter what we pass for status, since the core will
866 * just overwrite it (because the URB has been unlinked).
867 */
868 xhci_giveback_urb_in_irq(xhci, cur_td, 0, "cancelled");
869
870 /* Stop processing the cancelled list if the watchdog timer is
871 * running.
872 */
873 if (xhci->xhc_state & XHCI_STATE_DYING)
874 return;
875 } while (cur_td != last_unlinked_td);
876
877 /* Return to the event handler with xhci->lock re-acquired */
878}
879
880/* Watchdog timer function for when a stop endpoint command fails to complete.
881 * In this case, we assume the host controller is broken or dying or dead. The
882 * host may still be completing some other events, so we have to be careful to
883 * let the event ring handler and the URB dequeueing/enqueueing functions know
884 * through xhci->state.
885 *
886 * The timer may also fire if the host takes a very long time to respond to the
887 * command, and the stop endpoint command completion handler cannot delete the
888 * timer before the timer function is called. Another endpoint cancellation may
889 * sneak in before the timer function can grab the lock, and that may queue
890 * another stop endpoint command and add the timer back. So we cannot use a
891 * simple flag to say whether there is a pending stop endpoint command for a
892 * particular endpoint.
893 *
894 * Instead we use a combination of that flag and a counter for the number of
895 * pending stop endpoint commands. If the timer is the tail end of the last
896 * stop endpoint command, and the endpoint's command is still pending, we assume
897 * the host is dying.
898 */
899void xhci_stop_endpoint_command_watchdog(unsigned long arg)
900{
901 struct xhci_hcd *xhci;
902 struct xhci_virt_ep *ep;
903 struct xhci_virt_ep *temp_ep;
904 struct xhci_ring *ring;
905 struct xhci_td *cur_td;
906 int ret, i, j;
907 unsigned long flags;
908
909 ep = (struct xhci_virt_ep *) arg;
910 xhci = ep->xhci;
911
912 spin_lock_irqsave(&xhci->lock, flags);
913
914 ep->stop_cmds_pending--;
915 if (xhci->xhc_state & XHCI_STATE_DYING) {
916 xhci_dbg(xhci, "Stop EP timer ran, but another timer marked "
917 "xHCI as DYING, exiting.\n");
918 spin_unlock_irqrestore(&xhci->lock, flags);
919 return;
920 }
921 if (!(ep->stop_cmds_pending == 0 && (ep->ep_state & EP_HALT_PENDING))) {
922 xhci_dbg(xhci, "Stop EP timer ran, but no command pending, "
923 "exiting.\n");
924 spin_unlock_irqrestore(&xhci->lock, flags);
925 return;
926 }
927
928 xhci_warn(xhci, "xHCI host not responding to stop endpoint command.\n");
929 xhci_warn(xhci, "Assuming host is dying, halting host.\n");
930 /* Oops, HC is dead or dying or at least not responding to the stop
931 * endpoint command.
932 */
933 xhci->xhc_state |= XHCI_STATE_DYING;
934 /* Disable interrupts from the host controller and start halting it */
935 xhci_quiesce(xhci);
936 spin_unlock_irqrestore(&xhci->lock, flags);
937
938 ret = xhci_halt(xhci);
939
940 spin_lock_irqsave(&xhci->lock, flags);
941 if (ret < 0) {
942 /* This is bad; the host is not responding to commands and it's
943 * not allowing itself to be halted. At least interrupts are
944 * disabled. If we call usb_hc_died(), it will attempt to
945 * disconnect all device drivers under this host. Those
946 * disconnect() methods will wait for all URBs to be unlinked,
947 * so we must complete them.
948 */
949 xhci_warn(xhci, "Non-responsive xHCI host is not halting.\n");
950 xhci_warn(xhci, "Completing active URBs anyway.\n");
951 /* We could turn all TDs on the rings to no-ops. This won't
952 * help if the host has cached part of the ring, and is slow if
953 * we want to preserve the cycle bit. Skip it and hope the host
954 * doesn't touch the memory.
955 */
956 }
957 for (i = 0; i < MAX_HC_SLOTS; i++) {
958 if (!xhci->devs[i])
959 continue;
960 for (j = 0; j < 31; j++) {
961 temp_ep = &xhci->devs[i]->eps[j];
962 ring = temp_ep->ring;
963 if (!ring)
964 continue;
965 xhci_dbg(xhci, "Killing URBs for slot ID %u, "
966 "ep index %u\n", i, j);
967 while (!list_empty(&ring->td_list)) {
968 cur_td = list_first_entry(&ring->td_list,
969 struct xhci_td,
970 td_list);
971 list_del_init(&cur_td->td_list);
972 if (!list_empty(&cur_td->cancelled_td_list))
973 list_del_init(&cur_td->cancelled_td_list);
974 xhci_giveback_urb_in_irq(xhci, cur_td,
975 -ESHUTDOWN, "killed");
976 }
977 while (!list_empty(&temp_ep->cancelled_td_list)) {
978 cur_td = list_first_entry(
979 &temp_ep->cancelled_td_list,
980 struct xhci_td,
981 cancelled_td_list);
982 list_del_init(&cur_td->cancelled_td_list);
983 xhci_giveback_urb_in_irq(xhci, cur_td,
984 -ESHUTDOWN, "killed");
985 }
986 }
987 }
988 spin_unlock_irqrestore(&xhci->lock, flags);
989 xhci_dbg(xhci, "Calling usb_hc_died()\n");
990 usb_hc_died(xhci_to_hcd(xhci)->primary_hcd);
991 xhci_dbg(xhci, "xHCI host controller is dead.\n");
992}
993
994
995static void update_ring_for_set_deq_completion(struct xhci_hcd *xhci,
996 struct xhci_virt_device *dev,
997 struct xhci_ring *ep_ring,
998 unsigned int ep_index)
999{
1000 union xhci_trb *dequeue_temp;
1001 int num_trbs_free_temp;
1002 bool revert = false;
1003
1004 num_trbs_free_temp = ep_ring->num_trbs_free;
1005 dequeue_temp = ep_ring->dequeue;
1006
1007 /* If we get two back-to-back stalls, and the first stalled transfer
1008 * ends just before a link TRB, the dequeue pointer will be left on
1009 * the link TRB by the code in the while loop. So we have to update
1010 * the dequeue pointer one segment further, or we'll jump off
1011 * the segment into la-la-land.
1012 */
1013 if (last_trb(xhci, ep_ring, ep_ring->deq_seg, ep_ring->dequeue)) {
1014 ep_ring->deq_seg = ep_ring->deq_seg->next;
1015 ep_ring->dequeue = ep_ring->deq_seg->trbs;
1016 }
1017
1018 while (ep_ring->dequeue != dev->eps[ep_index].queued_deq_ptr) {
1019 /* We have more usable TRBs */
1020 ep_ring->num_trbs_free++;
1021 ep_ring->dequeue++;
1022 if (last_trb(xhci, ep_ring, ep_ring->deq_seg,
1023 ep_ring->dequeue)) {
1024 if (ep_ring->dequeue ==
1025 dev->eps[ep_index].queued_deq_ptr)
1026 break;
1027 ep_ring->deq_seg = ep_ring->deq_seg->next;
1028 ep_ring->dequeue = ep_ring->deq_seg->trbs;
1029 }
1030 if (ep_ring->dequeue == dequeue_temp) {
1031 revert = true;
1032 break;
1033 }
1034 }
1035
1036 if (revert) {
1037 xhci_dbg(xhci, "Unable to find new dequeue pointer\n");
1038 ep_ring->num_trbs_free = num_trbs_free_temp;
1039 }
1040}
1041
1042/*
1043 * When we get a completion for a Set Transfer Ring Dequeue Pointer command,
1044 * we need to clear the set deq pending flag in the endpoint ring state, so that
1045 * the TD queueing code can ring the doorbell again. We also need to ring the
1046 * endpoint doorbell to restart the ring, but only if there aren't more
1047 * cancellations pending.
1048 */
1049static void handle_set_deq_completion(struct xhci_hcd *xhci,
1050 struct xhci_event_cmd *event,
1051 union xhci_trb *trb)
1052{
1053 unsigned int slot_id;
1054 unsigned int ep_index;
1055 unsigned int stream_id;
1056 struct xhci_ring *ep_ring;
1057 struct xhci_virt_device *dev;
1058 struct xhci_ep_ctx *ep_ctx;
1059 struct xhci_slot_ctx *slot_ctx;
1060
1061 slot_id = TRB_TO_SLOT_ID(le32_to_cpu(trb->generic.field[3]));
1062 ep_index = TRB_TO_EP_INDEX(le32_to_cpu(trb->generic.field[3]));
1063 stream_id = TRB_TO_STREAM_ID(le32_to_cpu(trb->generic.field[2]));
1064 dev = xhci->devs[slot_id];
1065
1066 ep_ring = xhci_stream_id_to_ring(dev, ep_index, stream_id);
1067 if (!ep_ring) {
1068 xhci_warn(xhci, "WARN Set TR deq ptr command for "
1069 "freed stream ID %u\n",
1070 stream_id);
1071 /* XXX: Harmless??? */
1072 dev->eps[ep_index].ep_state &= ~SET_DEQ_PENDING;
1073 return;
1074 }
1075
1076 ep_ctx = xhci_get_ep_ctx(xhci, dev->out_ctx, ep_index);
1077 slot_ctx = xhci_get_slot_ctx(xhci, dev->out_ctx);
1078
1079 if (GET_COMP_CODE(le32_to_cpu(event->status)) != COMP_SUCCESS) {
1080 unsigned int ep_state;
1081 unsigned int slot_state;
1082
1083 switch (GET_COMP_CODE(le32_to_cpu(event->status))) {
1084 case COMP_TRB_ERR:
1085 xhci_warn(xhci, "WARN Set TR Deq Ptr cmd invalid because "
1086 "of stream ID configuration\n");
1087 break;
1088 case COMP_CTX_STATE:
1089 xhci_warn(xhci, "WARN Set TR Deq Ptr cmd failed due "
1090 "to incorrect slot or ep state.\n");
1091 ep_state = le32_to_cpu(ep_ctx->ep_info);
1092 ep_state &= EP_STATE_MASK;
1093 slot_state = le32_to_cpu(slot_ctx->dev_state);
1094 slot_state = GET_SLOT_STATE(slot_state);
1095 xhci_dbg(xhci, "Slot state = %u, EP state = %u\n",
1096 slot_state, ep_state);
1097 break;
1098 case COMP_EBADSLT:
1099 xhci_warn(xhci, "WARN Set TR Deq Ptr cmd failed because "
1100 "slot %u was not enabled.\n", slot_id);
1101 break;
1102 default:
1103 xhci_warn(xhci, "WARN Set TR Deq Ptr cmd with unknown "
1104 "completion code of %u.\n",
1105 GET_COMP_CODE(le32_to_cpu(event->status)));
1106 break;
1107 }
1108 /* OK what do we do now? The endpoint state is hosed, and we
1109 * should never get to this point if the synchronization between
1110 * queueing, and endpoint state are correct. This might happen
1111 * if the device gets disconnected after we've finished
1112 * cancelling URBs, which might not be an error...
1113 */
1114 } else {
1115 xhci_dbg(xhci, "Successful Set TR Deq Ptr cmd, deq = @%08llx\n",
1116 le64_to_cpu(ep_ctx->deq));
1117 if (xhci_trb_virt_to_dma(dev->eps[ep_index].queued_deq_seg,
1118 dev->eps[ep_index].queued_deq_ptr) ==
1119 (le64_to_cpu(ep_ctx->deq) & ~(EP_CTX_CYCLE_MASK))) {
1120 /* Update the ring's dequeue segment and dequeue pointer
1121 * to reflect the new position.
1122 */
1123 update_ring_for_set_deq_completion(xhci, dev,
1124 ep_ring, ep_index);
1125 } else {
1126 xhci_warn(xhci, "Mismatch between completed Set TR Deq "
1127 "Ptr command & xHCI internal state.\n");
1128 xhci_warn(xhci, "ep deq seg = %p, deq ptr = %p\n",
1129 dev->eps[ep_index].queued_deq_seg,
1130 dev->eps[ep_index].queued_deq_ptr);
1131 }
1132 }
1133
1134 dev->eps[ep_index].ep_state &= ~SET_DEQ_PENDING;
1135 dev->eps[ep_index].queued_deq_seg = NULL;
1136 dev->eps[ep_index].queued_deq_ptr = NULL;
1137 /* Restart any rings with pending URBs */
1138 ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
1139}
1140
1141static void handle_reset_ep_completion(struct xhci_hcd *xhci,
1142 struct xhci_event_cmd *event,
1143 union xhci_trb *trb)
1144{
1145 int slot_id;
1146 unsigned int ep_index;
1147
1148 slot_id = TRB_TO_SLOT_ID(le32_to_cpu(trb->generic.field[3]));
1149 ep_index = TRB_TO_EP_INDEX(le32_to_cpu(trb->generic.field[3]));
1150 /* This command will only fail if the endpoint wasn't halted,
1151 * but we don't care.
1152 */
1153 xhci_dbg(xhci, "Ignoring reset ep completion code of %u\n",
1154 GET_COMP_CODE(le32_to_cpu(event->status)));
1155
1156 /* HW with the reset endpoint quirk needs to have a configure endpoint
1157 * command complete before the endpoint can be used. Queue that here
1158 * because the HW can't handle two commands being queued in a row.
1159 */
1160 if (xhci->quirks & XHCI_RESET_EP_QUIRK) {
1161 xhci_dbg(xhci, "Queueing configure endpoint command\n");
1162 xhci_queue_configure_endpoint(xhci,
1163 xhci->devs[slot_id]->in_ctx->dma, slot_id,
1164 false);
1165 xhci_ring_cmd_db(xhci);
1166 } else {
1167 /* Clear our internal halted state and restart the ring(s) */
1168 xhci->devs[slot_id]->eps[ep_index].ep_state &= ~EP_HALTED;
1169 ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
1170 }
1171}
1172
1173/* Complete the command and detele it from the devcie's command queue.
1174 */
1175static void xhci_complete_cmd_in_cmd_wait_list(struct xhci_hcd *xhci,
1176 struct xhci_command *command, u32 status)
1177{
1178 command->status = status;
1179 list_del(&command->cmd_list);
1180 if (command->completion)
1181 complete(command->completion);
1182 else
1183 xhci_free_command(xhci, command);
1184}
1185
1186
1187/* Check to see if a command in the device's command queue matches this one.
1188 * Signal the completion or free the command, and return 1. Return 0 if the
1189 * completed command isn't at the head of the command list.
1190 */
1191static int handle_cmd_in_cmd_wait_list(struct xhci_hcd *xhci,
1192 struct xhci_virt_device *virt_dev,
1193 struct xhci_event_cmd *event)
1194{
1195 struct xhci_command *command;
1196
1197 if (list_empty(&virt_dev->cmd_list))
1198 return 0;
1199
1200 command = list_entry(virt_dev->cmd_list.next,
1201 struct xhci_command, cmd_list);
1202 if (xhci->cmd_ring->dequeue != command->command_trb)
1203 return 0;
1204
1205 xhci_complete_cmd_in_cmd_wait_list(xhci, command,
1206 GET_COMP_CODE(le32_to_cpu(event->status)));
1207 return 1;
1208}
1209
1210/*
1211 * Finding the command trb need to be cancelled and modifying it to
1212 * NO OP command. And if the command is in device's command wait
1213 * list, finishing and freeing it.
1214 *
1215 * If we can't find the command trb, we think it had already been
1216 * executed.
1217 */
1218static void xhci_cmd_to_noop(struct xhci_hcd *xhci, struct xhci_cd *cur_cd)
1219{
1220 struct xhci_segment *cur_seg;
1221 union xhci_trb *cmd_trb;
1222 u32 cycle_state;
1223
1224 if (xhci->cmd_ring->dequeue == xhci->cmd_ring->enqueue)
1225 return;
1226
1227 /* find the current segment of command ring */
1228 cur_seg = find_trb_seg(xhci->cmd_ring->first_seg,
1229 xhci->cmd_ring->dequeue, &cycle_state);
1230
1231 /* find the command trb matched by cd from command ring */
1232 for (cmd_trb = xhci->cmd_ring->dequeue;
1233 cmd_trb != xhci->cmd_ring->enqueue;
1234 next_trb(xhci, xhci->cmd_ring, &cur_seg, &cmd_trb)) {
1235 /* If the trb is link trb, continue */
1236 if (TRB_TYPE_LINK_LE32(cmd_trb->generic.field[3]))
1237 continue;
1238
1239 if (cur_cd->cmd_trb == cmd_trb) {
1240
1241 /* If the command in device's command list, we should
1242 * finish it and free the command structure.
1243 */
1244 if (cur_cd->command)
1245 xhci_complete_cmd_in_cmd_wait_list(xhci,
1246 cur_cd->command, COMP_CMD_STOP);
1247
1248 /* get cycle state from the origin command trb */
1249 cycle_state = le32_to_cpu(cmd_trb->generic.field[3])
1250 & TRB_CYCLE;
1251
1252 /* modify the command trb to NO OP command */
1253 cmd_trb->generic.field[0] = 0;
1254 cmd_trb->generic.field[1] = 0;
1255 cmd_trb->generic.field[2] = 0;
1256 cmd_trb->generic.field[3] = cpu_to_le32(
1257 TRB_TYPE(TRB_CMD_NOOP) | cycle_state);
1258 break;
1259 }
1260 }
1261}
1262
1263static void xhci_cancel_cmd_in_cd_list(struct xhci_hcd *xhci)
1264{
1265 struct xhci_cd *cur_cd, *next_cd;
1266
1267 if (list_empty(&xhci->cancel_cmd_list))
1268 return;
1269
1270 list_for_each_entry_safe(cur_cd, next_cd,
1271 &xhci->cancel_cmd_list, cancel_cmd_list) {
1272 xhci_cmd_to_noop(xhci, cur_cd);
1273 list_del(&cur_cd->cancel_cmd_list);
1274 kfree(cur_cd);
1275 }
1276}
1277
1278/*
1279 * traversing the cancel_cmd_list. If the command descriptor according
1280 * to cmd_trb is found, the function free it and return 1, otherwise
1281 * return 0.
1282 */
1283static int xhci_search_cmd_trb_in_cd_list(struct xhci_hcd *xhci,
1284 union xhci_trb *cmd_trb)
1285{
1286 struct xhci_cd *cur_cd, *next_cd;
1287
1288 if (list_empty(&xhci->cancel_cmd_list))
1289 return 0;
1290
1291 list_for_each_entry_safe(cur_cd, next_cd,
1292 &xhci->cancel_cmd_list, cancel_cmd_list) {
1293 if (cur_cd->cmd_trb == cmd_trb) {
1294 if (cur_cd->command)
1295 xhci_complete_cmd_in_cmd_wait_list(xhci,
1296 cur_cd->command, COMP_CMD_STOP);
1297 list_del(&cur_cd->cancel_cmd_list);
1298 kfree(cur_cd);
1299 return 1;
1300 }
1301 }
1302
1303 return 0;
1304}
1305
1306/*
1307 * If the cmd_trb_comp_code is COMP_CMD_ABORT, we just check whether the
1308 * trb pointed by the command ring dequeue pointer is the trb we want to
1309 * cancel or not. And if the cmd_trb_comp_code is COMP_CMD_STOP, we will
1310 * traverse the cancel_cmd_list to trun the all of the commands according
1311 * to command descriptor to NO-OP trb.
1312 */
1313static int handle_stopped_cmd_ring(struct xhci_hcd *xhci,
1314 int cmd_trb_comp_code)
1315{
1316 int cur_trb_is_good = 0;
1317
1318 /* Searching the cmd trb pointed by the command ring dequeue
1319 * pointer in command descriptor list. If it is found, free it.
1320 */
1321 cur_trb_is_good = xhci_search_cmd_trb_in_cd_list(xhci,
1322 xhci->cmd_ring->dequeue);
1323
1324 if (cmd_trb_comp_code == COMP_CMD_ABORT)
1325 xhci->cmd_ring_state = CMD_RING_STATE_STOPPED;
1326 else if (cmd_trb_comp_code == COMP_CMD_STOP) {
1327 /* traversing the cancel_cmd_list and canceling
1328 * the command according to command descriptor
1329 */
1330 xhci_cancel_cmd_in_cd_list(xhci);
1331
1332 xhci->cmd_ring_state = CMD_RING_STATE_RUNNING;
1333 /*
1334 * ring command ring doorbell again to restart the
1335 * command ring
1336 */
1337 if (xhci->cmd_ring->dequeue != xhci->cmd_ring->enqueue)
1338 xhci_ring_cmd_db(xhci);
1339 }
1340 return cur_trb_is_good;
1341}
1342
1343static void handle_cmd_completion(struct xhci_hcd *xhci,
1344 struct xhci_event_cmd *event)
1345{
1346 int slot_id = TRB_TO_SLOT_ID(le32_to_cpu(event->flags));
1347 u64 cmd_dma;
1348 dma_addr_t cmd_dequeue_dma;
1349 struct xhci_input_control_ctx *ctrl_ctx;
1350 struct xhci_virt_device *virt_dev;
1351 unsigned int ep_index;
1352 struct xhci_ring *ep_ring;
1353 unsigned int ep_state;
1354
1355 cmd_dma = le64_to_cpu(event->cmd_trb);
1356 cmd_dequeue_dma = xhci_trb_virt_to_dma(xhci->cmd_ring->deq_seg,
1357 xhci->cmd_ring->dequeue);
1358 /* Is the command ring deq ptr out of sync with the deq seg ptr? */
1359 if (cmd_dequeue_dma == 0) {
1360 xhci->error_bitmask |= 1 << 4;
1361 return;
1362 }
1363 /* Does the DMA address match our internal dequeue pointer address? */
1364 if (cmd_dma != (u64) cmd_dequeue_dma) {
1365 xhci->error_bitmask |= 1 << 5;
1366 return;
1367 }
1368
1369 if ((GET_COMP_CODE(le32_to_cpu(event->status)) == COMP_CMD_ABORT) ||
1370 (GET_COMP_CODE(le32_to_cpu(event->status)) == COMP_CMD_STOP)) {
1371 /* If the return value is 0, we think the trb pointed by
1372 * command ring dequeue pointer is a good trb. The good
1373 * trb means we don't want to cancel the trb, but it have
1374 * been stopped by host. So we should handle it normally.
1375 * Otherwise, driver should invoke inc_deq() and return.
1376 */
1377 if (handle_stopped_cmd_ring(xhci,
1378 GET_COMP_CODE(le32_to_cpu(event->status)))) {
1379 inc_deq(xhci, xhci->cmd_ring);
1380 return;
1381 }
1382 }
1383
1384 switch (le32_to_cpu(xhci->cmd_ring->dequeue->generic.field[3])
1385 & TRB_TYPE_BITMASK) {
1386 case TRB_TYPE(TRB_ENABLE_SLOT):
1387 if (GET_COMP_CODE(le32_to_cpu(event->status)) == COMP_SUCCESS)
1388 xhci->slot_id = slot_id;
1389 else
1390 xhci->slot_id = 0;
1391 complete(&xhci->addr_dev);
1392 break;
1393 case TRB_TYPE(TRB_DISABLE_SLOT):
1394 if (xhci->devs[slot_id]) {
1395 if (xhci->quirks & XHCI_EP_LIMIT_QUIRK)
1396 /* Delete default control endpoint resources */
1397 xhci_free_device_endpoint_resources(xhci,
1398 xhci->devs[slot_id], true);
1399 xhci_free_virt_device(xhci, slot_id);
1400 }
1401 break;
1402 case TRB_TYPE(TRB_CONFIG_EP):
1403 virt_dev = xhci->devs[slot_id];
1404 if (handle_cmd_in_cmd_wait_list(xhci, virt_dev, event))
1405 break;
1406 /*
1407 * Configure endpoint commands can come from the USB core
1408 * configuration or alt setting changes, or because the HW
1409 * needed an extra configure endpoint command after a reset
1410 * endpoint command or streams were being configured.
1411 * If the command was for a halted endpoint, the xHCI driver
1412 * is not waiting on the configure endpoint command.
1413 */
1414 ctrl_ctx = xhci_get_input_control_ctx(xhci,
1415 virt_dev->in_ctx);
1416 /* Input ctx add_flags are the endpoint index plus one */
1417 ep_index = xhci_last_valid_endpoint(le32_to_cpu(ctrl_ctx->add_flags)) - 1;
1418 /* A usb_set_interface() call directly after clearing a halted
1419 * condition may race on this quirky hardware. Not worth
1420 * worrying about, since this is prototype hardware. Not sure
1421 * if this will work for streams, but streams support was
1422 * untested on this prototype.
1423 */
1424 if (xhci->quirks & XHCI_RESET_EP_QUIRK &&
1425 ep_index != (unsigned int) -1 &&
1426 le32_to_cpu(ctrl_ctx->add_flags) - SLOT_FLAG ==
1427 le32_to_cpu(ctrl_ctx->drop_flags)) {
1428 ep_ring = xhci->devs[slot_id]->eps[ep_index].ring;
1429 ep_state = xhci->devs[slot_id]->eps[ep_index].ep_state;
1430 if (!(ep_state & EP_HALTED))
1431 goto bandwidth_change;
1432 xhci_dbg(xhci, "Completed config ep cmd - "
1433 "last ep index = %d, state = %d\n",
1434 ep_index, ep_state);
1435 /* Clear internal halted state and restart ring(s) */
1436 xhci->devs[slot_id]->eps[ep_index].ep_state &=
1437 ~EP_HALTED;
1438 ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
1439 break;
1440 }
1441bandwidth_change:
1442 xhci_dbg(xhci, "Completed config ep cmd\n");
1443 xhci->devs[slot_id]->cmd_status =
1444 GET_COMP_CODE(le32_to_cpu(event->status));
1445 complete(&xhci->devs[slot_id]->cmd_completion);
1446 break;
1447 case TRB_TYPE(TRB_EVAL_CONTEXT):
1448 virt_dev = xhci->devs[slot_id];
1449 if (handle_cmd_in_cmd_wait_list(xhci, virt_dev, event))
1450 break;
1451 xhci->devs[slot_id]->cmd_status = GET_COMP_CODE(le32_to_cpu(event->status));
1452 complete(&xhci->devs[slot_id]->cmd_completion);
1453 break;
1454 case TRB_TYPE(TRB_ADDR_DEV):
1455 xhci->devs[slot_id]->cmd_status = GET_COMP_CODE(le32_to_cpu(event->status));
1456 complete(&xhci->addr_dev);
1457 break;
1458 case TRB_TYPE(TRB_STOP_RING):
1459 handle_stopped_endpoint(xhci, xhci->cmd_ring->dequeue, event);
1460 break;
1461 case TRB_TYPE(TRB_SET_DEQ):
1462 handle_set_deq_completion(xhci, event, xhci->cmd_ring->dequeue);
1463 break;
1464 case TRB_TYPE(TRB_CMD_NOOP):
1465 break;
1466 case TRB_TYPE(TRB_RESET_EP):
1467 handle_reset_ep_completion(xhci, event, xhci->cmd_ring->dequeue);
1468 break;
1469 case TRB_TYPE(TRB_RESET_DEV):
1470 xhci_dbg(xhci, "Completed reset device command.\n");
1471 slot_id = TRB_TO_SLOT_ID(
1472 le32_to_cpu(xhci->cmd_ring->dequeue->generic.field[3]));
1473 virt_dev = xhci->devs[slot_id];
1474 if (virt_dev)
1475 handle_cmd_in_cmd_wait_list(xhci, virt_dev, event);
1476 else
1477 xhci_warn(xhci, "Reset device command completion "
1478 "for disabled slot %u\n", slot_id);
1479 break;
1480 case TRB_TYPE(TRB_NEC_GET_FW):
1481 if (!(xhci->quirks & XHCI_NEC_HOST)) {
1482 xhci->error_bitmask |= 1 << 6;
1483 break;
1484 }
1485 xhci_dbg(xhci, "NEC firmware version %2x.%02x\n",
1486 NEC_FW_MAJOR(le32_to_cpu(event->status)),
1487 NEC_FW_MINOR(le32_to_cpu(event->status)));
1488 break;
1489 default:
1490 /* Skip over unknown commands on the event ring */
1491 xhci->error_bitmask |= 1 << 6;
1492 break;
1493 }
1494 inc_deq(xhci, xhci->cmd_ring);
1495}
1496
1497static void handle_vendor_event(struct xhci_hcd *xhci,
1498 union xhci_trb *event)
1499{
1500 u32 trb_type;
1501
1502 trb_type = TRB_FIELD_TO_TYPE(le32_to_cpu(event->generic.field[3]));
1503 xhci_dbg(xhci, "Vendor specific event TRB type = %u\n", trb_type);
1504 if (trb_type == TRB_NEC_CMD_COMP && (xhci->quirks & XHCI_NEC_HOST))
1505 handle_cmd_completion(xhci, &event->event_cmd);
1506}
1507
1508/* @port_id: the one-based port ID from the hardware (indexed from array of all
1509 * port registers -- USB 3.0 and USB 2.0).
1510 *
1511 * Returns a zero-based port number, which is suitable for indexing into each of
1512 * the split roothubs' port arrays and bus state arrays.
1513 * Add one to it in order to call xhci_find_slot_id_by_port.
1514 */
1515static unsigned int find_faked_portnum_from_hw_portnum(struct usb_hcd *hcd,
1516 struct xhci_hcd *xhci, u32 port_id)
1517{
1518 unsigned int i;
1519 unsigned int num_similar_speed_ports = 0;
1520
1521 /* port_id from the hardware is 1-based, but port_array[], usb3_ports[],
1522 * and usb2_ports are 0-based indexes. Count the number of similar
1523 * speed ports, up to 1 port before this port.
1524 */
1525 for (i = 0; i < (port_id - 1); i++) {
1526 u8 port_speed = xhci->port_array[i];
1527
1528 /*
1529 * Skip ports that don't have known speeds, or have duplicate
1530 * Extended Capabilities port speed entries.
1531 */
1532 if (port_speed == 0 || port_speed == DUPLICATE_ENTRY)
1533 continue;
1534
1535 /*
1536 * USB 3.0 ports are always under a USB 3.0 hub. USB 2.0 and
1537 * 1.1 ports are under the USB 2.0 hub. If the port speed
1538 * matches the device speed, it's a similar speed port.
1539 */
1540 if ((port_speed == 0x03) == (hcd->speed == HCD_USB3))
1541 num_similar_speed_ports++;
1542 }
1543 return num_similar_speed_ports;
1544}
1545
1546static void handle_device_notification(struct xhci_hcd *xhci,
1547 union xhci_trb *event)
1548{
1549 u32 slot_id;
1550 struct usb_device *udev;
1551
1552 slot_id = TRB_TO_SLOT_ID(event->generic.field[3]);
1553 if (!xhci->devs[slot_id]) {
1554 xhci_warn(xhci, "Device Notification event for "
1555 "unused slot %u\n", slot_id);
1556 return;
1557 }
1558
1559 xhci_dbg(xhci, "Device Wake Notification event for slot ID %u\n",
1560 slot_id);
1561 udev = xhci->devs[slot_id]->udev;
1562 if (udev && udev->parent)
1563 usb_wakeup_notification(udev->parent, udev->portnum);
1564}
1565
1566static void handle_port_status(struct xhci_hcd *xhci,
1567 union xhci_trb *event)
1568{
1569 struct usb_hcd *hcd;
1570 u32 port_id;
1571 u32 temp, temp1;
1572 int max_ports;
1573 int slot_id;
1574 unsigned int faked_port_index;
1575 u8 major_revision;
1576 struct xhci_bus_state *bus_state;
1577 __le32 __iomem **port_array;
1578 bool bogus_port_status = false;
1579
1580 /* Port status change events always have a successful completion code */
1581 if (GET_COMP_CODE(le32_to_cpu(event->generic.field[2])) != COMP_SUCCESS) {
1582 xhci_warn(xhci, "WARN: xHC returned failed port status event\n");
1583 xhci->error_bitmask |= 1 << 8;
1584 }
1585 port_id = GET_PORT_ID(le32_to_cpu(event->generic.field[0]));
1586 xhci_dbg(xhci, "Port Status Change Event for port %d\n", port_id);
1587
1588 max_ports = HCS_MAX_PORTS(xhci->hcs_params1);
1589 if ((port_id <= 0) || (port_id > max_ports)) {
1590 xhci_warn(xhci, "Invalid port id %d\n", port_id);
1591 bogus_port_status = true;
1592 goto cleanup;
1593 }
1594
1595 /* Figure out which usb_hcd this port is attached to:
1596 * is it a USB 3.0 port or a USB 2.0/1.1 port?
1597 */
1598 major_revision = xhci->port_array[port_id - 1];
1599 if (major_revision == 0) {
1600 xhci_warn(xhci, "Event for port %u not in "
1601 "Extended Capabilities, ignoring.\n",
1602 port_id);
1603 bogus_port_status = true;
1604 goto cleanup;
1605 }
1606 if (major_revision == DUPLICATE_ENTRY) {
1607 xhci_warn(xhci, "Event for port %u duplicated in"
1608 "Extended Capabilities, ignoring.\n",
1609 port_id);
1610 bogus_port_status = true;
1611 goto cleanup;
1612 }
1613
1614 /*
1615 * Hardware port IDs reported by a Port Status Change Event include USB
1616 * 3.0 and USB 2.0 ports. We want to check if the port has reported a
1617 * resume event, but we first need to translate the hardware port ID
1618 * into the index into the ports on the correct split roothub, and the
1619 * correct bus_state structure.
1620 */
1621 /* Find the right roothub. */
1622 hcd = xhci_to_hcd(xhci);
1623 if ((major_revision == 0x03) != (hcd->speed == HCD_USB3))
1624 hcd = xhci->shared_hcd;
1625 bus_state = &xhci->bus_state[hcd_index(hcd)];
1626 if (hcd->speed == HCD_USB3)
1627 port_array = xhci->usb3_ports;
1628 else
1629 port_array = xhci->usb2_ports;
1630 /* Find the faked port hub number */
1631 faked_port_index = find_faked_portnum_from_hw_portnum(hcd, xhci,
1632 port_id);
1633
1634 temp = xhci_readl(xhci, port_array[faked_port_index]);
1635 if (hcd->state == HC_STATE_SUSPENDED) {
1636 xhci_dbg(xhci, "resume root hub\n");
1637 usb_hcd_resume_root_hub(hcd);
1638 }
1639
1640 if ((temp & PORT_PLC) && (temp & PORT_PLS_MASK) == XDEV_RESUME) {
1641 xhci_dbg(xhci, "port resume event for port %d\n", port_id);
1642
1643 temp1 = xhci_readl(xhci, &xhci->op_regs->command);
1644 if (!(temp1 & CMD_RUN)) {
1645 xhci_warn(xhci, "xHC is not running.\n");
1646 goto cleanup;
1647 }
1648
1649 if (DEV_SUPERSPEED(temp)) {
1650 xhci_dbg(xhci, "remote wake SS port %d\n", port_id);
1651 /* Set a flag to say the port signaled remote wakeup,
1652 * so we can tell the difference between the end of
1653 * device and host initiated resume.
1654 */
1655 bus_state->port_remote_wakeup |= 1 << faked_port_index;
1656 xhci_test_and_clear_bit(xhci, port_array,
1657 faked_port_index, PORT_PLC);
1658 xhci_set_link_state(xhci, port_array, faked_port_index,
1659 XDEV_U0);
1660 /* Need to wait until the next link state change
1661 * indicates the device is actually in U0.
1662 */
1663 bogus_port_status = true;
1664 goto cleanup;
1665 } else {
1666 xhci_dbg(xhci, "resume HS port %d\n", port_id);
1667 bus_state->resume_done[faked_port_index] = jiffies +
1668 msecs_to_jiffies(20);
1669 set_bit(faked_port_index, &bus_state->resuming_ports);
1670 mod_timer(&hcd->rh_timer,
1671 bus_state->resume_done[faked_port_index]);
1672 /* Do the rest in GetPortStatus */
1673 }
1674 }
1675
1676 if ((temp & PORT_PLC) && (temp & PORT_PLS_MASK) == XDEV_U0 &&
1677 DEV_SUPERSPEED(temp)) {
1678 xhci_dbg(xhci, "resume SS port %d finished\n", port_id);
1679 /* We've just brought the device into U0 through either the
1680 * Resume state after a device remote wakeup, or through the
1681 * U3Exit state after a host-initiated resume. If it's a device
1682 * initiated remote wake, don't pass up the link state change,
1683 * so the roothub behavior is consistent with external
1684 * USB 3.0 hub behavior.
1685 */
1686 slot_id = xhci_find_slot_id_by_port(hcd, xhci,
1687 faked_port_index + 1);
1688 if (slot_id && xhci->devs[slot_id])
1689 xhci_ring_device(xhci, slot_id);
1690 if (bus_state->port_remote_wakeup && (1 << faked_port_index)) {
1691 bus_state->port_remote_wakeup &=
1692 ~(1 << faked_port_index);
1693 xhci_test_and_clear_bit(xhci, port_array,
1694 faked_port_index, PORT_PLC);
1695 usb_wakeup_notification(hcd->self.root_hub,
1696 faked_port_index + 1);
1697 bogus_port_status = true;
1698 goto cleanup;
1699 }
1700 }
1701
1702 if (hcd->speed != HCD_USB3)
1703 xhci_test_and_clear_bit(xhci, port_array, faked_port_index,
1704 PORT_PLC);
1705
1706cleanup:
1707 /* Update event ring dequeue pointer before dropping the lock */
1708 inc_deq(xhci, xhci->event_ring);
1709
1710 /* Don't make the USB core poll the roothub if we got a bad port status
1711 * change event. Besides, at that point we can't tell which roothub
1712 * (USB 2.0 or USB 3.0) to kick.
1713 */
1714 if (bogus_port_status)
1715 return;
1716
1717 spin_unlock(&xhci->lock);
1718 /* Pass this up to the core */
1719 usb_hcd_poll_rh_status(hcd);
1720 spin_lock(&xhci->lock);
1721}
1722
1723/*
1724 * This TD is defined by the TRBs starting at start_trb in start_seg and ending
1725 * at end_trb, which may be in another segment. If the suspect DMA address is a
1726 * TRB in this TD, this function returns that TRB's segment. Otherwise it
1727 * returns 0.
1728 */
1729struct xhci_segment *trb_in_td(struct xhci_segment *start_seg,
1730 union xhci_trb *start_trb,
1731 union xhci_trb *end_trb,
1732 dma_addr_t suspect_dma)
1733{
1734 dma_addr_t start_dma;
1735 dma_addr_t end_seg_dma;
1736 dma_addr_t end_trb_dma;
1737 struct xhci_segment *cur_seg;
1738
1739 start_dma = xhci_trb_virt_to_dma(start_seg, start_trb);
1740 cur_seg = start_seg;
1741
1742 do {
1743 if (start_dma == 0)
1744 return NULL;
1745 /* We may get an event for a Link TRB in the middle of a TD */
1746 end_seg_dma = xhci_trb_virt_to_dma(cur_seg,
1747 &cur_seg->trbs[TRBS_PER_SEGMENT - 1]);
1748 /* If the end TRB isn't in this segment, this is set to 0 */
1749 end_trb_dma = xhci_trb_virt_to_dma(cur_seg, end_trb);
1750
1751 if (end_trb_dma > 0) {
1752 /* The end TRB is in this segment, so suspect should be here */
1753 if (start_dma <= end_trb_dma) {
1754 if (suspect_dma >= start_dma && suspect_dma <= end_trb_dma)
1755 return cur_seg;
1756 } else {
1757 /* Case for one segment with
1758 * a TD wrapped around to the top
1759 */
1760 if ((suspect_dma >= start_dma &&
1761 suspect_dma <= end_seg_dma) ||
1762 (suspect_dma >= cur_seg->dma &&
1763 suspect_dma <= end_trb_dma))
1764 return cur_seg;
1765 }
1766 return NULL;
1767 } else {
1768 /* Might still be somewhere in this segment */
1769 if (suspect_dma >= start_dma && suspect_dma <= end_seg_dma)
1770 return cur_seg;
1771 }
1772 cur_seg = cur_seg->next;
1773 start_dma = xhci_trb_virt_to_dma(cur_seg, &cur_seg->trbs[0]);
1774 } while (cur_seg != start_seg);
1775
1776 return NULL;
1777}
1778
1779static void xhci_cleanup_halted_endpoint(struct xhci_hcd *xhci,
1780 unsigned int slot_id, unsigned int ep_index,
1781 unsigned int stream_id,
1782 struct xhci_td *td, union xhci_trb *event_trb)
1783{
1784 struct xhci_virt_ep *ep = &xhci->devs[slot_id]->eps[ep_index];
1785 ep->ep_state |= EP_HALTED;
1786 ep->stopped_td = td;
1787 ep->stopped_trb = event_trb;
1788 ep->stopped_stream = stream_id;
1789
1790 xhci_queue_reset_ep(xhci, slot_id, ep_index);
1791 xhci_cleanup_stalled_ring(xhci, td->urb->dev, ep_index);
1792
1793 ep->stopped_td = NULL;
1794 ep->stopped_trb = NULL;
1795 ep->stopped_stream = 0;
1796
1797 xhci_ring_cmd_db(xhci);
1798}
1799
1800/* Check if an error has halted the endpoint ring. The class driver will
1801 * cleanup the halt for a non-default control endpoint if we indicate a stall.
1802 * However, a babble and other errors also halt the endpoint ring, and the class
1803 * driver won't clear the halt in that case, so we need to issue a Set Transfer
1804 * Ring Dequeue Pointer command manually.
1805 */
1806static int xhci_requires_manual_halt_cleanup(struct xhci_hcd *xhci,
1807 struct xhci_ep_ctx *ep_ctx,
1808 unsigned int trb_comp_code)
1809{
1810 /* TRB completion codes that may require a manual halt cleanup */
1811 if (trb_comp_code == COMP_TX_ERR ||
1812 trb_comp_code == COMP_BABBLE ||
1813 trb_comp_code == COMP_SPLIT_ERR)
1814 /* The 0.96 spec says a babbling control endpoint
1815 * is not halted. The 0.96 spec says it is. Some HW
1816 * claims to be 0.95 compliant, but it halts the control
1817 * endpoint anyway. Check if a babble halted the
1818 * endpoint.
1819 */
1820 if ((ep_ctx->ep_info & cpu_to_le32(EP_STATE_MASK)) ==
1821 cpu_to_le32(EP_STATE_HALTED))
1822 return 1;
1823
1824 return 0;
1825}
1826
1827int xhci_is_vendor_info_code(struct xhci_hcd *xhci, unsigned int trb_comp_code)
1828{
1829 if (trb_comp_code >= 224 && trb_comp_code <= 255) {
1830 /* Vendor defined "informational" completion code,
1831 * treat as not-an-error.
1832 */
1833 xhci_dbg(xhci, "Vendor defined info completion code %u\n",
1834 trb_comp_code);
1835 xhci_dbg(xhci, "Treating code as success.\n");
1836 return 1;
1837 }
1838 return 0;
1839}
1840
1841/*
1842 * Finish the td processing, remove the td from td list;
1843 * Return 1 if the urb can be given back.
1844 */
1845static int finish_td(struct xhci_hcd *xhci, struct xhci_td *td,
1846 union xhci_trb *event_trb, struct xhci_transfer_event *event,
1847 struct xhci_virt_ep *ep, int *status, bool skip)
1848{
1849 struct xhci_virt_device *xdev;
1850 struct xhci_ring *ep_ring;
1851 unsigned int slot_id;
1852 int ep_index;
1853 struct urb *urb = NULL;
1854 struct xhci_ep_ctx *ep_ctx;
1855 int ret = 0;
1856 struct urb_priv *urb_priv;
1857 u32 trb_comp_code;
1858
1859 slot_id = TRB_TO_SLOT_ID(le32_to_cpu(event->flags));
1860 xdev = xhci->devs[slot_id];
1861 ep_index = TRB_TO_EP_ID(le32_to_cpu(event->flags)) - 1;
1862 ep_ring = xhci_dma_to_transfer_ring(ep, le64_to_cpu(event->buffer));
1863 ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index);
1864 trb_comp_code = GET_COMP_CODE(le32_to_cpu(event->transfer_len));
1865
1866 if (skip)
1867 goto td_cleanup;
1868
1869 if (trb_comp_code == COMP_STOP_INVAL ||
1870 trb_comp_code == COMP_STOP) {
1871 /* The Endpoint Stop Command completion will take care of any
1872 * stopped TDs. A stopped TD may be restarted, so don't update
1873 * the ring dequeue pointer or take this TD off any lists yet.
1874 */
1875 ep->stopped_td = td;
1876 ep->stopped_trb = event_trb;
1877 return 0;
1878 } else {
1879 if (trb_comp_code == COMP_STALL) {
1880 /* The transfer is completed from the driver's
1881 * perspective, but we need to issue a set dequeue
1882 * command for this stalled endpoint to move the dequeue
1883 * pointer past the TD. We can't do that here because
1884 * the halt condition must be cleared first. Let the
1885 * USB class driver clear the stall later.
1886 */
1887 ep->stopped_td = td;
1888 ep->stopped_trb = event_trb;
1889 ep->stopped_stream = ep_ring->stream_id;
1890 } else if (xhci_requires_manual_halt_cleanup(xhci,
1891 ep_ctx, trb_comp_code)) {
1892 /* Other types of errors halt the endpoint, but the
1893 * class driver doesn't call usb_reset_endpoint() unless
1894 * the error is -EPIPE. Clear the halted status in the
1895 * xHCI hardware manually.
1896 */
1897 xhci_cleanup_halted_endpoint(xhci,
1898 slot_id, ep_index, ep_ring->stream_id,
1899 td, event_trb);
1900 } else {
1901 /* Update ring dequeue pointer */
1902 while (ep_ring->dequeue != td->last_trb)
1903 inc_deq(xhci, ep_ring);
1904 inc_deq(xhci, ep_ring);
1905 }
1906
1907td_cleanup:
1908 /* Clean up the endpoint's TD list */
1909 urb = td->urb;
1910 urb_priv = urb->hcpriv;
1911
1912 /* Do one last check of the actual transfer length.
1913 * If the host controller said we transferred more data than
1914 * the buffer length, urb->actual_length will be a very big
1915 * number (since it's unsigned). Play it safe and say we didn't
1916 * transfer anything.
1917 */
1918 if (urb->actual_length > urb->transfer_buffer_length) {
1919 xhci_warn(xhci, "URB transfer length is wrong, "
1920 "xHC issue? req. len = %u, "
1921 "act. len = %u\n",
1922 urb->transfer_buffer_length,
1923 urb->actual_length);
1924 urb->actual_length = 0;
1925 if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
1926 *status = -EREMOTEIO;
1927 else
1928 *status = 0;
1929 }
1930 list_del_init(&td->td_list);
1931 /* Was this TD slated to be cancelled but completed anyway? */
1932 if (!list_empty(&td->cancelled_td_list))
1933 list_del_init(&td->cancelled_td_list);
1934
1935 urb_priv->td_cnt++;
1936 /* Giveback the urb when all the tds are completed */
1937 if (urb_priv->td_cnt == urb_priv->length) {
1938 ret = 1;
1939 if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
1940 xhci_to_hcd(xhci)->self.bandwidth_isoc_reqs--;
1941 if (xhci_to_hcd(xhci)->self.bandwidth_isoc_reqs
1942 == 0) {
1943 if (xhci->quirks & XHCI_AMD_PLL_FIX)
1944 usb_amd_quirk_pll_enable();
1945 }
1946 }
1947 }
1948 }
1949
1950 return ret;
1951}
1952
1953/*
1954 * Process control tds, update urb status and actual_length.
1955 */
1956static int process_ctrl_td(struct xhci_hcd *xhci, struct xhci_td *td,
1957 union xhci_trb *event_trb, struct xhci_transfer_event *event,
1958 struct xhci_virt_ep *ep, int *status)
1959{
1960 struct xhci_virt_device *xdev;
1961 struct xhci_ring *ep_ring;
1962 unsigned int slot_id;
1963 int ep_index;
1964 struct xhci_ep_ctx *ep_ctx;
1965 u32 trb_comp_code;
1966
1967 slot_id = TRB_TO_SLOT_ID(le32_to_cpu(event->flags));
1968 xdev = xhci->devs[slot_id];
1969 ep_index = TRB_TO_EP_ID(le32_to_cpu(event->flags)) - 1;
1970 ep_ring = xhci_dma_to_transfer_ring(ep, le64_to_cpu(event->buffer));
1971 ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index);
1972 trb_comp_code = GET_COMP_CODE(le32_to_cpu(event->transfer_len));
1973
1974 switch (trb_comp_code) {
1975 case COMP_SUCCESS:
1976 if (event_trb == ep_ring->dequeue) {
1977 xhci_warn(xhci, "WARN: Success on ctrl setup TRB "
1978 "without IOC set??\n");
1979 *status = -ESHUTDOWN;
1980 } else if (event_trb != td->last_trb) {
1981 xhci_warn(xhci, "WARN: Success on ctrl data TRB "
1982 "without IOC set??\n");
1983 *status = -ESHUTDOWN;
1984 } else {
1985 *status = 0;
1986 }
1987 break;
1988 case COMP_SHORT_TX:
1989 if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
1990 *status = -EREMOTEIO;
1991 else
1992 *status = 0;
1993 break;
1994 case COMP_STOP_INVAL:
1995 case COMP_STOP:
1996 return finish_td(xhci, td, event_trb, event, ep, status, false);
1997 default:
1998 if (!xhci_requires_manual_halt_cleanup(xhci,
1999 ep_ctx, trb_comp_code))
2000 break;
2001 xhci_dbg(xhci, "TRB error code %u, "
2002 "halted endpoint index = %u\n",
2003 trb_comp_code, ep_index);
2004 /* else fall through */
2005 case COMP_STALL:
2006 /* Did we transfer part of the data (middle) phase? */
2007 if (event_trb != ep_ring->dequeue &&
2008 event_trb != td->last_trb)
2009 td->urb->actual_length =
2010 td->urb->transfer_buffer_length
2011 - TRB_LEN(le32_to_cpu(event->transfer_len));
2012 else
2013 td->urb->actual_length = 0;
2014
2015 xhci_cleanup_halted_endpoint(xhci,
2016 slot_id, ep_index, 0, td, event_trb);
2017 return finish_td(xhci, td, event_trb, event, ep, status, true);
2018 }
2019 /*
2020 * Did we transfer any data, despite the errors that might have
2021 * happened? I.e. did we get past the setup stage?
2022 */
2023 if (event_trb != ep_ring->dequeue) {
2024 /* The event was for the status stage */
2025 if (event_trb == td->last_trb) {
2026 if (td->urb->actual_length != 0) {
2027 /* Don't overwrite a previously set error code
2028 */
2029 if ((*status == -EINPROGRESS || *status == 0) &&
2030 (td->urb->transfer_flags
2031 & URB_SHORT_NOT_OK))
2032 /* Did we already see a short data
2033 * stage? */
2034 *status = -EREMOTEIO;
2035 } else {
2036 td->urb->actual_length =
2037 td->urb->transfer_buffer_length;
2038 }
2039 } else {
2040 /* Maybe the event was for the data stage? */
2041 td->urb->actual_length =
2042 td->urb->transfer_buffer_length -
2043 TRB_LEN(le32_to_cpu(event->transfer_len));
2044 xhci_dbg(xhci, "Waiting for status "
2045 "stage event\n");
2046 return 0;
2047 }
2048 }
2049
2050 return finish_td(xhci, td, event_trb, event, ep, status, false);
2051}
2052
2053/*
2054 * Process isochronous tds, update urb packet status and actual_length.
2055 */
2056static int process_isoc_td(struct xhci_hcd *xhci, struct xhci_td *td,
2057 union xhci_trb *event_trb, struct xhci_transfer_event *event,
2058 struct xhci_virt_ep *ep, int *status)
2059{
2060 struct xhci_ring *ep_ring;
2061 struct urb_priv *urb_priv;
2062 int idx;
2063 int len = 0;
2064 union xhci_trb *cur_trb;
2065 struct xhci_segment *cur_seg;
2066 struct usb_iso_packet_descriptor *frame;
2067 u32 trb_comp_code;
2068 bool skip_td = false;
2069
2070 ep_ring = xhci_dma_to_transfer_ring(ep, le64_to_cpu(event->buffer));
2071 trb_comp_code = GET_COMP_CODE(le32_to_cpu(event->transfer_len));
2072 urb_priv = td->urb->hcpriv;
2073 idx = urb_priv->td_cnt;
2074 frame = &td->urb->iso_frame_desc[idx];
2075
2076 /* handle completion code */
2077 switch (trb_comp_code) {
2078 case COMP_SUCCESS:
2079 if (TRB_LEN(le32_to_cpu(event->transfer_len)) == 0) {
2080 frame->status = 0;
2081 break;
2082 }
2083 if ((xhci->quirks & XHCI_TRUST_TX_LENGTH))
2084 trb_comp_code = COMP_SHORT_TX;
2085 case COMP_SHORT_TX:
2086 frame->status = td->urb->transfer_flags & URB_SHORT_NOT_OK ?
2087 -EREMOTEIO : 0;
2088 break;
2089 case COMP_BW_OVER:
2090 frame->status = -ECOMM;
2091 skip_td = true;
2092 break;
2093 case COMP_BUFF_OVER:
2094 case COMP_BABBLE:
2095 frame->status = -EOVERFLOW;
2096 skip_td = true;
2097 break;
2098 case COMP_DEV_ERR:
2099 case COMP_STALL:
2100 case COMP_TX_ERR:
2101 frame->status = -EPROTO;
2102 skip_td = true;
2103 break;
2104 case COMP_STOP:
2105 case COMP_STOP_INVAL:
2106 break;
2107 default:
2108 frame->status = -1;
2109 break;
2110 }
2111
2112 if (trb_comp_code == COMP_SUCCESS || skip_td) {
2113 frame->actual_length = frame->length;
2114 td->urb->actual_length += frame->length;
2115 } else {
2116 for (cur_trb = ep_ring->dequeue,
2117 cur_seg = ep_ring->deq_seg; cur_trb != event_trb;
2118 next_trb(xhci, ep_ring, &cur_seg, &cur_trb)) {
2119 if (!TRB_TYPE_NOOP_LE32(cur_trb->generic.field[3]) &&
2120 !TRB_TYPE_LINK_LE32(cur_trb->generic.field[3]))
2121 len += TRB_LEN(le32_to_cpu(cur_trb->generic.field[2]));
2122 }
2123 len += TRB_LEN(le32_to_cpu(cur_trb->generic.field[2])) -
2124 TRB_LEN(le32_to_cpu(event->transfer_len));
2125
2126 if (trb_comp_code != COMP_STOP_INVAL) {
2127 frame->actual_length = len;
2128 td->urb->actual_length += len;
2129 }
2130 }
2131
2132 return finish_td(xhci, td, event_trb, event, ep, status, false);
2133}
2134
2135static int skip_isoc_td(struct xhci_hcd *xhci, struct xhci_td *td,
2136 struct xhci_transfer_event *event,
2137 struct xhci_virt_ep *ep, int *status)
2138{
2139 struct xhci_ring *ep_ring;
2140 struct urb_priv *urb_priv;
2141 struct usb_iso_packet_descriptor *frame;
2142 int idx;
2143
2144 ep_ring = xhci_dma_to_transfer_ring(ep, le64_to_cpu(event->buffer));
2145 urb_priv = td->urb->hcpriv;
2146 idx = urb_priv->td_cnt;
2147 frame = &td->urb->iso_frame_desc[idx];
2148
2149 /* The transfer is partly done. */
2150 frame->status = -EXDEV;
2151
2152 /* calc actual length */
2153 frame->actual_length = 0;
2154
2155 /* Update ring dequeue pointer */
2156 while (ep_ring->dequeue != td->last_trb)
2157 inc_deq(xhci, ep_ring);
2158 inc_deq(xhci, ep_ring);
2159
2160 return finish_td(xhci, td, NULL, event, ep, status, true);
2161}
2162
2163/*
2164 * Process bulk and interrupt tds, update urb status and actual_length.
2165 */
2166static int process_bulk_intr_td(struct xhci_hcd *xhci, struct xhci_td *td,
2167 union xhci_trb *event_trb, struct xhci_transfer_event *event,
2168 struct xhci_virt_ep *ep, int *status)
2169{
2170 struct xhci_ring *ep_ring;
2171 union xhci_trb *cur_trb;
2172 struct xhci_segment *cur_seg;
2173 u32 trb_comp_code;
2174
2175 ep_ring = xhci_dma_to_transfer_ring(ep, le64_to_cpu(event->buffer));
2176 trb_comp_code = GET_COMP_CODE(le32_to_cpu(event->transfer_len));
2177
2178 switch (trb_comp_code) {
2179 case COMP_SUCCESS:
2180 /* Double check that the HW transferred everything. */
2181 if (event_trb != td->last_trb ||
2182 TRB_LEN(le32_to_cpu(event->transfer_len)) != 0) {
2183 xhci_warn(xhci, "WARN Successful completion "
2184 "on short TX\n");
2185 if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
2186 *status = -EREMOTEIO;
2187 else
2188 *status = 0;
2189 if ((xhci->quirks & XHCI_TRUST_TX_LENGTH))
2190 trb_comp_code = COMP_SHORT_TX;
2191 } else {
2192 *status = 0;
2193 }
2194 break;
2195 case COMP_SHORT_TX:
2196 if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
2197 *status = -EREMOTEIO;
2198 else
2199 *status = 0;
2200 break;
2201 default:
2202 /* Others already handled above */
2203 break;
2204 }
2205 if (trb_comp_code == COMP_SHORT_TX)
2206 xhci_dbg(xhci, "ep %#x - asked for %d bytes, "
2207 "%d bytes untransferred\n",
2208 td->urb->ep->desc.bEndpointAddress,
2209 td->urb->transfer_buffer_length,
2210 TRB_LEN(le32_to_cpu(event->transfer_len)));
2211 /* Fast path - was this the last TRB in the TD for this URB? */
2212 if (event_trb == td->last_trb) {
2213 if (TRB_LEN(le32_to_cpu(event->transfer_len)) != 0) {
2214 td->urb->actual_length =
2215 td->urb->transfer_buffer_length -
2216 TRB_LEN(le32_to_cpu(event->transfer_len));
2217 if (td->urb->transfer_buffer_length <
2218 td->urb->actual_length) {
2219 xhci_warn(xhci, "HC gave bad length "
2220 "of %d bytes left\n",
2221 TRB_LEN(le32_to_cpu(event->transfer_len)));
2222 td->urb->actual_length = 0;
2223 if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
2224 *status = -EREMOTEIO;
2225 else
2226 *status = 0;
2227 }
2228 /* Don't overwrite a previously set error code */
2229 if (*status == -EINPROGRESS) {
2230 if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
2231 *status = -EREMOTEIO;
2232 else
2233 *status = 0;
2234 }
2235 } else {
2236 td->urb->actual_length =
2237 td->urb->transfer_buffer_length;
2238 /* Ignore a short packet completion if the
2239 * untransferred length was zero.
2240 */
2241 if (*status == -EREMOTEIO)
2242 *status = 0;
2243 }
2244 } else {
2245 /* Slow path - walk the list, starting from the dequeue
2246 * pointer, to get the actual length transferred.
2247 */
2248 td->urb->actual_length = 0;
2249 for (cur_trb = ep_ring->dequeue, cur_seg = ep_ring->deq_seg;
2250 cur_trb != event_trb;
2251 next_trb(xhci, ep_ring, &cur_seg, &cur_trb)) {
2252 if (!TRB_TYPE_NOOP_LE32(cur_trb->generic.field[3]) &&
2253 !TRB_TYPE_LINK_LE32(cur_trb->generic.field[3]))
2254 td->urb->actual_length +=
2255 TRB_LEN(le32_to_cpu(cur_trb->generic.field[2]));
2256 }
2257 /* If the ring didn't stop on a Link or No-op TRB, add
2258 * in the actual bytes transferred from the Normal TRB
2259 */
2260 if (trb_comp_code != COMP_STOP_INVAL)
2261 td->urb->actual_length +=
2262 TRB_LEN(le32_to_cpu(cur_trb->generic.field[2])) -
2263 TRB_LEN(le32_to_cpu(event->transfer_len));
2264 }
2265
2266 return finish_td(xhci, td, event_trb, event, ep, status, false);
2267}
2268
2269/*
2270 * If this function returns an error condition, it means it got a Transfer
2271 * event with a corrupted Slot ID, Endpoint ID, or TRB DMA address.
2272 * At this point, the host controller is probably hosed and should be reset.
2273 */
2274static int handle_tx_event(struct xhci_hcd *xhci,
2275 struct xhci_transfer_event *event)
2276{
2277 struct xhci_virt_device *xdev;
2278 struct xhci_virt_ep *ep;
2279 struct xhci_ring *ep_ring;
2280 unsigned int slot_id;
2281 int ep_index;
2282 struct xhci_td *td = NULL;
2283 dma_addr_t event_dma;
2284 struct xhci_segment *event_seg;
2285 union xhci_trb *event_trb;
2286 struct urb *urb = NULL;
2287 int status = -EINPROGRESS;
2288 struct urb_priv *urb_priv;
2289 struct xhci_ep_ctx *ep_ctx;
2290 struct list_head *tmp;
2291 u32 trb_comp_code;
2292 int ret = 0;
2293 int td_num = 0;
2294
2295 slot_id = TRB_TO_SLOT_ID(le32_to_cpu(event->flags));
2296 xdev = xhci->devs[slot_id];
2297 if (!xdev) {
2298 xhci_err(xhci, "ERROR Transfer event pointed to bad slot\n");
2299 xhci_err(xhci, "@%016llx %08x %08x %08x %08x\n",
2300 (unsigned long long) xhci_trb_virt_to_dma(
2301 xhci->event_ring->deq_seg,
2302 xhci->event_ring->dequeue),
2303 lower_32_bits(le64_to_cpu(event->buffer)),
2304 upper_32_bits(le64_to_cpu(event->buffer)),
2305 le32_to_cpu(event->transfer_len),
2306 le32_to_cpu(event->flags));
2307 xhci_dbg(xhci, "Event ring:\n");
2308 xhci_debug_segment(xhci, xhci->event_ring->deq_seg);
2309 return -ENODEV;
2310 }
2311
2312 /* Endpoint ID is 1 based, our index is zero based */
2313 ep_index = TRB_TO_EP_ID(le32_to_cpu(event->flags)) - 1;
2314 ep = &xdev->eps[ep_index];
2315 ep_ring = xhci_dma_to_transfer_ring(ep, le64_to_cpu(event->buffer));
2316 ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index);
2317 if (!ep_ring ||
2318 (le32_to_cpu(ep_ctx->ep_info) & EP_STATE_MASK) ==
2319 EP_STATE_DISABLED) {
2320 xhci_err(xhci, "ERROR Transfer event for disabled endpoint "
2321 "or incorrect stream ring\n");
2322 xhci_err(xhci, "@%016llx %08x %08x %08x %08x\n",
2323 (unsigned long long) xhci_trb_virt_to_dma(
2324 xhci->event_ring->deq_seg,
2325 xhci->event_ring->dequeue),
2326 lower_32_bits(le64_to_cpu(event->buffer)),
2327 upper_32_bits(le64_to_cpu(event->buffer)),
2328 le32_to_cpu(event->transfer_len),
2329 le32_to_cpu(event->flags));
2330 xhci_dbg(xhci, "Event ring:\n");
2331 xhci_debug_segment(xhci, xhci->event_ring->deq_seg);
2332 return -ENODEV;
2333 }
2334
2335 /* Count current td numbers if ep->skip is set */
2336 if (ep->skip) {
2337 list_for_each(tmp, &ep_ring->td_list)
2338 td_num++;
2339 }
2340
2341 event_dma = le64_to_cpu(event->buffer);
2342 trb_comp_code = GET_COMP_CODE(le32_to_cpu(event->transfer_len));
2343 /* Look for common error cases */
2344 switch (trb_comp_code) {
2345 /* Skip codes that require special handling depending on
2346 * transfer type
2347 */
2348 case COMP_SUCCESS:
2349 if (TRB_LEN(le32_to_cpu(event->transfer_len)) == 0)
2350 break;
2351 if (xhci->quirks & XHCI_TRUST_TX_LENGTH)
2352 trb_comp_code = COMP_SHORT_TX;
2353 else
2354 xhci_warn(xhci, "WARN Successful completion on short TX: "
2355 "needs XHCI_TRUST_TX_LENGTH quirk?\n");
2356 case COMP_SHORT_TX:
2357 break;
2358 case COMP_STOP:
2359 xhci_dbg(xhci, "Stopped on Transfer TRB\n");
2360 break;
2361 case COMP_STOP_INVAL:
2362 xhci_dbg(xhci, "Stopped on No-op or Link TRB\n");
2363 break;
2364 case COMP_STALL:
2365 xhci_dbg(xhci, "Stalled endpoint\n");
2366 ep->ep_state |= EP_HALTED;
2367 status = -EPIPE;
2368 break;
2369 case COMP_TRB_ERR:
2370 xhci_warn(xhci, "WARN: TRB error on endpoint\n");
2371 status = -EILSEQ;
2372 break;
2373 case COMP_SPLIT_ERR:
2374 case COMP_TX_ERR:
2375 xhci_dbg(xhci, "Transfer error on endpoint\n");
2376 status = -EPROTO;
2377 break;
2378 case COMP_BABBLE:
2379 xhci_dbg(xhci, "Babble error on endpoint\n");
2380 status = -EOVERFLOW;
2381 break;
2382 case COMP_DB_ERR:
2383 xhci_warn(xhci, "WARN: HC couldn't access mem fast enough\n");
2384 status = -ENOSR;
2385 break;
2386 case COMP_BW_OVER:
2387 xhci_warn(xhci, "WARN: bandwidth overrun event on endpoint\n");
2388 break;
2389 case COMP_BUFF_OVER:
2390 xhci_warn(xhci, "WARN: buffer overrun event on endpoint\n");
2391 break;
2392 case COMP_UNDERRUN:
2393 /*
2394 * When the Isoch ring is empty, the xHC will generate
2395 * a Ring Overrun Event for IN Isoch endpoint or Ring
2396 * Underrun Event for OUT Isoch endpoint.
2397 */
2398 xhci_dbg(xhci, "underrun event on endpoint\n");
2399 if (!list_empty(&ep_ring->td_list))
2400 xhci_dbg(xhci, "Underrun Event for slot %d ep %d "
2401 "still with TDs queued?\n",
2402 TRB_TO_SLOT_ID(le32_to_cpu(event->flags)),
2403 ep_index);
2404 goto cleanup;
2405 case COMP_OVERRUN:
2406 xhci_dbg(xhci, "overrun event on endpoint\n");
2407 if (!list_empty(&ep_ring->td_list))
2408 xhci_dbg(xhci, "Overrun Event for slot %d ep %d "
2409 "still with TDs queued?\n",
2410 TRB_TO_SLOT_ID(le32_to_cpu(event->flags)),
2411 ep_index);
2412 goto cleanup;
2413 case COMP_DEV_ERR:
2414 xhci_warn(xhci, "WARN: detect an incompatible device");
2415 status = -EPROTO;
2416 break;
2417 case COMP_MISSED_INT:
2418 /*
2419 * When encounter missed service error, one or more isoc tds
2420 * may be missed by xHC.
2421 * Set skip flag of the ep_ring; Complete the missed tds as
2422 * short transfer when process the ep_ring next time.
2423 */
2424 ep->skip = true;
2425 xhci_dbg(xhci, "Miss service interval error, set skip flag\n");
2426 goto cleanup;
2427 default:
2428 if (xhci_is_vendor_info_code(xhci, trb_comp_code)) {
2429 status = 0;
2430 break;
2431 }
2432 xhci_warn(xhci, "ERROR Unknown event condition, HC probably "
2433 "busted\n");
2434 goto cleanup;
2435 }
2436
2437 do {
2438 /* This TRB should be in the TD at the head of this ring's
2439 * TD list.
2440 */
2441 if (list_empty(&ep_ring->td_list)) {
2442 xhci_warn(xhci, "WARN Event TRB for slot %d ep %d "
2443 "with no TDs queued?\n",
2444 TRB_TO_SLOT_ID(le32_to_cpu(event->flags)),
2445 ep_index);
2446 xhci_dbg(xhci, "Event TRB with TRB type ID %u\n",
2447 (le32_to_cpu(event->flags) &
2448 TRB_TYPE_BITMASK)>>10);
2449 xhci_print_trb_offsets(xhci, (union xhci_trb *) event);
2450 if (ep->skip) {
2451 ep->skip = false;
2452 xhci_dbg(xhci, "td_list is empty while skip "
2453 "flag set. Clear skip flag.\n");
2454 }
2455 ret = 0;
2456 goto cleanup;
2457 }
2458
2459 /* We've skipped all the TDs on the ep ring when ep->skip set */
2460 if (ep->skip && td_num == 0) {
2461 ep->skip = false;
2462 xhci_dbg(xhci, "All tds on the ep_ring skipped. "
2463 "Clear skip flag.\n");
2464 ret = 0;
2465 goto cleanup;
2466 }
2467
2468 td = list_entry(ep_ring->td_list.next, struct xhci_td, td_list);
2469 if (ep->skip)
2470 td_num--;
2471
2472 /* Is this a TRB in the currently executing TD? */
2473 event_seg = trb_in_td(ep_ring->deq_seg, ep_ring->dequeue,
2474 td->last_trb, event_dma);
2475
2476 /*
2477 * Skip the Force Stopped Event. The event_trb(event_dma) of FSE
2478 * is not in the current TD pointed by ep_ring->dequeue because
2479 * that the hardware dequeue pointer still at the previous TRB
2480 * of the current TD. The previous TRB maybe a Link TD or the
2481 * last TRB of the previous TD. The command completion handle
2482 * will take care the rest.
2483 */
2484 if (!event_seg && trb_comp_code == COMP_STOP_INVAL) {
2485 ret = 0;
2486 goto cleanup;
2487 }
2488
2489 if (!event_seg) {
2490 if (!ep->skip ||
2491 !usb_endpoint_xfer_isoc(&td->urb->ep->desc)) {
2492 /* Some host controllers give a spurious
2493 * successful event after a short transfer.
2494 * Ignore it.
2495 */
2496 if ((xhci->quirks & XHCI_SPURIOUS_SUCCESS) &&
2497 ep_ring->last_td_was_short) {
2498 ep_ring->last_td_was_short = false;
2499 ret = 0;
2500 goto cleanup;
2501 }
2502 /* HC is busted, give up! */
2503 xhci_err(xhci,
2504 "ERROR Transfer event TRB DMA ptr not "
2505 "part of current TD\n");
2506 return -ESHUTDOWN;
2507 }
2508
2509 ret = skip_isoc_td(xhci, td, event, ep, &status);
2510 goto cleanup;
2511 }
2512 if (trb_comp_code == COMP_SHORT_TX)
2513 ep_ring->last_td_was_short = true;
2514 else
2515 ep_ring->last_td_was_short = false;
2516
2517 if (ep->skip) {
2518 xhci_dbg(xhci, "Found td. Clear skip flag.\n");
2519 ep->skip = false;
2520 }
2521
2522 event_trb = &event_seg->trbs[(event_dma - event_seg->dma) /
2523 sizeof(*event_trb)];
2524 /*
2525 * No-op TRB should not trigger interrupts.
2526 * If event_trb is a no-op TRB, it means the
2527 * corresponding TD has been cancelled. Just ignore
2528 * the TD.
2529 */
2530 if (TRB_TYPE_NOOP_LE32(event_trb->generic.field[3])) {
2531 xhci_dbg(xhci,
2532 "event_trb is a no-op TRB. Skip it\n");
2533 goto cleanup;
2534 }
2535
2536 /* Now update the urb's actual_length and give back to
2537 * the core
2538 */
2539 if (usb_endpoint_xfer_control(&td->urb->ep->desc))
2540 ret = process_ctrl_td(xhci, td, event_trb, event, ep,
2541 &status);
2542 else if (usb_endpoint_xfer_isoc(&td->urb->ep->desc))
2543 ret = process_isoc_td(xhci, td, event_trb, event, ep,
2544 &status);
2545 else
2546 ret = process_bulk_intr_td(xhci, td, event_trb, event,
2547 ep, &status);
2548
2549cleanup:
2550 /*
2551 * Do not update event ring dequeue pointer if ep->skip is set.
2552 * Will roll back to continue process missed tds.
2553 */
2554 if (trb_comp_code == COMP_MISSED_INT || !ep->skip) {
2555 inc_deq(xhci, xhci->event_ring);
2556 }
2557
2558 if (ret) {
2559 urb = td->urb;
2560 urb_priv = urb->hcpriv;
2561 /* Leave the TD around for the reset endpoint function
2562 * to use(but only if it's not a control endpoint,
2563 * since we already queued the Set TR dequeue pointer
2564 * command for stalled control endpoints).
2565 */
2566 if (usb_endpoint_xfer_control(&urb->ep->desc) ||
2567 (trb_comp_code != COMP_STALL &&
2568 trb_comp_code != COMP_BABBLE))
2569 xhci_urb_free_priv(xhci, urb_priv);
2570
2571 usb_hcd_unlink_urb_from_ep(bus_to_hcd(urb->dev->bus), urb);
2572 if ((urb->actual_length != urb->transfer_buffer_length &&
2573 (urb->transfer_flags &
2574 URB_SHORT_NOT_OK)) ||
2575 (status != 0 &&
2576 !usb_endpoint_xfer_isoc(&urb->ep->desc)))
2577 xhci_dbg(xhci, "Giveback URB %p, len = %d, "
2578 "expected = %d, status = %d\n",
2579 urb, urb->actual_length,
2580 urb->transfer_buffer_length,
2581 status);
2582 spin_unlock(&xhci->lock);
2583 /* EHCI, UHCI, and OHCI always unconditionally set the
2584 * urb->status of an isochronous endpoint to 0.
2585 */
2586 if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS)
2587 status = 0;
2588 usb_hcd_giveback_urb(bus_to_hcd(urb->dev->bus), urb, status);
2589 spin_lock(&xhci->lock);
2590 }
2591
2592 /*
2593 * If ep->skip is set, it means there are missed tds on the
2594 * endpoint ring need to take care of.
2595 * Process them as short transfer until reach the td pointed by
2596 * the event.
2597 */
2598 } while (ep->skip && trb_comp_code != COMP_MISSED_INT);
2599
2600 return 0;
2601}
2602
2603/*
2604 * This function handles all OS-owned events on the event ring. It may drop
2605 * xhci->lock between event processing (e.g. to pass up port status changes).
2606 * Returns >0 for "possibly more events to process" (caller should call again),
2607 * otherwise 0 if done. In future, <0 returns should indicate error code.
2608 */
2609static int xhci_handle_event(struct xhci_hcd *xhci)
2610{
2611 union xhci_trb *event;
2612 int update_ptrs = 1;
2613 int ret;
2614
2615 if (!xhci->event_ring || !xhci->event_ring->dequeue) {
2616 xhci->error_bitmask |= 1 << 1;
2617 return 0;
2618 }
2619
2620 event = xhci->event_ring->dequeue;
2621 /* Does the HC or OS own the TRB? */
2622 if ((le32_to_cpu(event->event_cmd.flags) & TRB_CYCLE) !=
2623 xhci->event_ring->cycle_state) {
2624 xhci->error_bitmask |= 1 << 2;
2625 return 0;
2626 }
2627
2628 /*
2629 * Barrier between reading the TRB_CYCLE (valid) flag above and any
2630 * speculative reads of the event's flags/data below.
2631 */
2632 rmb();
2633 /* FIXME: Handle more event types. */
2634 switch ((le32_to_cpu(event->event_cmd.flags) & TRB_TYPE_BITMASK)) {
2635 case TRB_TYPE(TRB_COMPLETION):
2636 handle_cmd_completion(xhci, &event->event_cmd);
2637 break;
2638 case TRB_TYPE(TRB_PORT_STATUS):
2639 handle_port_status(xhci, event);
2640 update_ptrs = 0;
2641 break;
2642 case TRB_TYPE(TRB_TRANSFER):
2643 ret = handle_tx_event(xhci, &event->trans_event);
2644 if (ret < 0)
2645 xhci->error_bitmask |= 1 << 9;
2646 else
2647 update_ptrs = 0;
2648 break;
2649 case TRB_TYPE(TRB_DEV_NOTE):
2650 handle_device_notification(xhci, event);
2651 break;
2652 default:
2653 if ((le32_to_cpu(event->event_cmd.flags) & TRB_TYPE_BITMASK) >=
2654 TRB_TYPE(48))
2655 handle_vendor_event(xhci, event);
2656 else
2657 xhci->error_bitmask |= 1 << 3;
2658 }
2659 /* Any of the above functions may drop and re-acquire the lock, so check
2660 * to make sure a watchdog timer didn't mark the host as non-responsive.
2661 */
2662 if (xhci->xhc_state & XHCI_STATE_DYING) {
2663 xhci_dbg(xhci, "xHCI host dying, returning from "
2664 "event handler.\n");
2665 return 0;
2666 }
2667
2668 if (update_ptrs)
2669 /* Update SW event ring dequeue pointer */
2670 inc_deq(xhci, xhci->event_ring);
2671
2672 /* Are there more items on the event ring? Caller will call us again to
2673 * check.
2674 */
2675 return 1;
2676}
2677
2678/*
2679 * xHCI spec says we can get an interrupt, and if the HC has an error condition,
2680 * we might get bad data out of the event ring. Section 4.10.2.7 has a list of
2681 * indicators of an event TRB error, but we check the status *first* to be safe.
2682 */
2683irqreturn_t xhci_irq(struct usb_hcd *hcd)
2684{
2685 struct xhci_hcd *xhci = hcd_to_xhci(hcd);
2686 u32 status;
2687 union xhci_trb *trb;
2688 u64 temp_64;
2689 union xhci_trb *event_ring_deq;
2690 dma_addr_t deq;
2691
2692 spin_lock(&xhci->lock);
2693 trb = xhci->event_ring->dequeue;
2694 /* Check if the xHC generated the interrupt, or the irq is shared */
2695 status = xhci_readl(xhci, &xhci->op_regs->status);
2696 if (status == 0xffffffff)
2697 goto hw_died;
2698
2699 if (!(status & STS_EINT)) {
2700 spin_unlock(&xhci->lock);
2701 return IRQ_NONE;
2702 }
2703 if (status & STS_FATAL) {
2704 xhci_warn(xhci, "WARNING: Host System Error\n");
2705 xhci_halt(xhci);
2706hw_died:
2707 spin_unlock(&xhci->lock);
2708 return -ESHUTDOWN;
2709 }
2710
2711 /*
2712 * Clear the op reg interrupt status first,
2713 * so we can receive interrupts from other MSI-X interrupters.
2714 * Write 1 to clear the interrupt status.
2715 */
2716 status |= STS_EINT;
2717 xhci_writel(xhci, status, &xhci->op_regs->status);
2718 /* FIXME when MSI-X is supported and there are multiple vectors */
2719 /* Clear the MSI-X event interrupt status */
2720
2721 if (hcd->irq) {
2722 u32 irq_pending;
2723 /* Acknowledge the PCI interrupt */
2724 irq_pending = xhci_readl(xhci, &xhci->ir_set->irq_pending);
2725 irq_pending |= IMAN_IP;
2726 xhci_writel(xhci, irq_pending, &xhci->ir_set->irq_pending);
2727 }
2728
2729 if (xhci->xhc_state & XHCI_STATE_DYING) {
2730 xhci_dbg(xhci, "xHCI dying, ignoring interrupt. "
2731 "Shouldn't IRQs be disabled?\n");
2732 /* Clear the event handler busy flag (RW1C);
2733 * the event ring should be empty.
2734 */
2735 temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
2736 xhci_write_64(xhci, temp_64 | ERST_EHB,
2737 &xhci->ir_set->erst_dequeue);
2738 spin_unlock(&xhci->lock);
2739
2740 return IRQ_HANDLED;
2741 }
2742
2743 event_ring_deq = xhci->event_ring->dequeue;
2744 /* FIXME this should be a delayed service routine
2745 * that clears the EHB.
2746 */
2747 while (xhci_handle_event(xhci) > 0) {}
2748
2749 temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
2750 /* If necessary, update the HW's version of the event ring deq ptr. */
2751 if (event_ring_deq != xhci->event_ring->dequeue) {
2752 deq = xhci_trb_virt_to_dma(xhci->event_ring->deq_seg,
2753 xhci->event_ring->dequeue);
2754 if (deq == 0)
2755 xhci_warn(xhci, "WARN something wrong with SW event "
2756 "ring dequeue ptr.\n");
2757 /* Update HC event ring dequeue pointer */
2758 temp_64 &= ERST_PTR_MASK;
2759 temp_64 |= ((u64) deq & (u64) ~ERST_PTR_MASK);
2760 }
2761
2762 /* Clear the event handler busy flag (RW1C); event ring is empty. */
2763 temp_64 |= ERST_EHB;
2764 xhci_write_64(xhci, temp_64, &xhci->ir_set->erst_dequeue);
2765
2766 spin_unlock(&xhci->lock);
2767
2768 return IRQ_HANDLED;
2769}
2770
2771irqreturn_t xhci_msi_irq(int irq, struct usb_hcd *hcd)
2772{
2773 return xhci_irq(hcd);
2774}
2775
2776/**** Endpoint Ring Operations ****/
2777
2778/*
2779 * Generic function for queueing a TRB on a ring.
2780 * The caller must have checked to make sure there's room on the ring.
2781 *
2782 * @more_trbs_coming: Will you enqueue more TRBs before calling
2783 * prepare_transfer()?
2784 */
2785static void queue_trb(struct xhci_hcd *xhci, struct xhci_ring *ring,
2786 bool more_trbs_coming,
2787 u32 field1, u32 field2, u32 field3, u32 field4)
2788{
2789 struct xhci_generic_trb *trb;
2790
2791 trb = &ring->enqueue->generic;
2792 trb->field[0] = cpu_to_le32(field1);
2793 trb->field[1] = cpu_to_le32(field2);
2794 trb->field[2] = cpu_to_le32(field3);
2795 trb->field[3] = cpu_to_le32(field4);
2796 inc_enq(xhci, ring, more_trbs_coming);
2797}
2798
2799/*
2800 * Does various checks on the endpoint ring, and makes it ready to queue num_trbs.
2801 * FIXME allocate segments if the ring is full.
2802 */
2803static int prepare_ring(struct xhci_hcd *xhci, struct xhci_ring *ep_ring,
2804 u32 ep_state, unsigned int num_trbs, gfp_t mem_flags)
2805{
2806 unsigned int num_trbs_needed;
2807
2808 /* Make sure the endpoint has been added to xHC schedule */
2809 switch (ep_state) {
2810 case EP_STATE_DISABLED:
2811 /*
2812 * USB core changed config/interfaces without notifying us,
2813 * or hardware is reporting the wrong state.
2814 */
2815 xhci_warn(xhci, "WARN urb submitted to disabled ep\n");
2816 return -ENOENT;
2817 case EP_STATE_ERROR:
2818 xhci_warn(xhci, "WARN waiting for error on ep to be cleared\n");
2819 /* FIXME event handling code for error needs to clear it */
2820 /* XXX not sure if this should be -ENOENT or not */
2821 return -EINVAL;
2822 case EP_STATE_HALTED:
2823 xhci_dbg(xhci, "WARN halted endpoint, queueing URB anyway.\n");
2824 case EP_STATE_STOPPED:
2825 case EP_STATE_RUNNING:
2826 break;
2827 default:
2828 xhci_err(xhci, "ERROR unknown endpoint state for ep\n");
2829 /*
2830 * FIXME issue Configure Endpoint command to try to get the HC
2831 * back into a known state.
2832 */
2833 return -EINVAL;
2834 }
2835
2836 while (1) {
2837 if (room_on_ring(xhci, ep_ring, num_trbs))
2838 break;
2839
2840 if (ep_ring == xhci->cmd_ring) {
2841 xhci_err(xhci, "Do not support expand command ring\n");
2842 return -ENOMEM;
2843 }
2844
2845 xhci_dbg(xhci, "ERROR no room on ep ring, "
2846 "try ring expansion\n");
2847 num_trbs_needed = num_trbs - ep_ring->num_trbs_free;
2848 if (xhci_ring_expansion(xhci, ep_ring, num_trbs_needed,
2849 mem_flags)) {
2850 xhci_err(xhci, "Ring expansion failed\n");
2851 return -ENOMEM;
2852 }
2853 };
2854
2855 if (enqueue_is_link_trb(ep_ring)) {
2856 struct xhci_ring *ring = ep_ring;
2857 union xhci_trb *next;
2858
2859 next = ring->enqueue;
2860
2861 while (last_trb(xhci, ring, ring->enq_seg, next)) {
2862 /* If we're not dealing with 0.95 hardware or isoc rings
2863 * on AMD 0.96 host, clear the chain bit.
2864 */
2865 if (!xhci_link_trb_quirk(xhci) &&
2866 !(ring->type == TYPE_ISOC &&
2867 (xhci->quirks & XHCI_AMD_0x96_HOST)))
2868 next->link.control &= cpu_to_le32(~TRB_CHAIN);
2869 else
2870 next->link.control |= cpu_to_le32(TRB_CHAIN);
2871
2872 wmb();
2873 next->link.control ^= cpu_to_le32(TRB_CYCLE);
2874
2875 /* Toggle the cycle bit after the last ring segment. */
2876 if (last_trb_on_last_seg(xhci, ring, ring->enq_seg, next)) {
2877 ring->cycle_state = (ring->cycle_state ? 0 : 1);
2878 }
2879 ring->enq_seg = ring->enq_seg->next;
2880 ring->enqueue = ring->enq_seg->trbs;
2881 next = ring->enqueue;
2882 }
2883 }
2884
2885 return 0;
2886}
2887
2888static int prepare_transfer(struct xhci_hcd *xhci,
2889 struct xhci_virt_device *xdev,
2890 unsigned int ep_index,
2891 unsigned int stream_id,
2892 unsigned int num_trbs,
2893 struct urb *urb,
2894 unsigned int td_index,
2895 gfp_t mem_flags)
2896{
2897 int ret;
2898 struct urb_priv *urb_priv;
2899 struct xhci_td *td;
2900 struct xhci_ring *ep_ring;
2901 struct xhci_ep_ctx *ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index);
2902
2903 ep_ring = xhci_stream_id_to_ring(xdev, ep_index, stream_id);
2904 if (!ep_ring) {
2905 xhci_dbg(xhci, "Can't prepare ring for bad stream ID %u\n",
2906 stream_id);
2907 return -EINVAL;
2908 }
2909
2910 ret = prepare_ring(xhci, ep_ring,
2911 le32_to_cpu(ep_ctx->ep_info) & EP_STATE_MASK,
2912 num_trbs, mem_flags);
2913 if (ret)
2914 return ret;
2915
2916 urb_priv = urb->hcpriv;
2917 td = urb_priv->td[td_index];
2918
2919 INIT_LIST_HEAD(&td->td_list);
2920 INIT_LIST_HEAD(&td->cancelled_td_list);
2921
2922 if (td_index == 0) {
2923 ret = usb_hcd_link_urb_to_ep(bus_to_hcd(urb->dev->bus), urb);
2924 if (unlikely(ret))
2925 return ret;
2926 }
2927
2928 td->urb = urb;
2929 /* Add this TD to the tail of the endpoint ring's TD list */
2930 list_add_tail(&td->td_list, &ep_ring->td_list);
2931 td->start_seg = ep_ring->enq_seg;
2932 td->first_trb = ep_ring->enqueue;
2933
2934 urb_priv->td[td_index] = td;
2935
2936 return 0;
2937}
2938
2939static unsigned int count_sg_trbs_needed(struct xhci_hcd *xhci, struct urb *urb)
2940{
2941 int num_sgs, num_trbs, running_total, temp, i;
2942 struct scatterlist *sg;
2943
2944 sg = NULL;
2945 num_sgs = urb->num_mapped_sgs;
2946 temp = urb->transfer_buffer_length;
2947
2948 num_trbs = 0;
2949 for_each_sg(urb->sg, sg, num_sgs, i) {
2950 unsigned int len = sg_dma_len(sg);
2951
2952 /* Scatter gather list entries may cross 64KB boundaries */
2953 running_total = TRB_MAX_BUFF_SIZE -
2954 (sg_dma_address(sg) & (TRB_MAX_BUFF_SIZE - 1));
2955 running_total &= TRB_MAX_BUFF_SIZE - 1;
2956 if (running_total != 0)
2957 num_trbs++;
2958
2959 /* How many more 64KB chunks to transfer, how many more TRBs? */
2960 while (running_total < sg_dma_len(sg) && running_total < temp) {
2961 num_trbs++;
2962 running_total += TRB_MAX_BUFF_SIZE;
2963 }
2964 len = min_t(int, len, temp);
2965 temp -= len;
2966 if (temp == 0)
2967 break;
2968 }
2969 return num_trbs;
2970}
2971
2972static void check_trb_math(struct urb *urb, int num_trbs, int running_total)
2973{
2974 if (num_trbs != 0)
2975 dev_err(&urb->dev->dev, "%s - ep %#x - Miscalculated number of "
2976 "TRBs, %d left\n", __func__,
2977 urb->ep->desc.bEndpointAddress, num_trbs);
2978 if (running_total != urb->transfer_buffer_length)
2979 dev_err(&urb->dev->dev, "%s - ep %#x - Miscalculated tx length, "
2980 "queued %#x (%d), asked for %#x (%d)\n",
2981 __func__,
2982 urb->ep->desc.bEndpointAddress,
2983 running_total, running_total,
2984 urb->transfer_buffer_length,
2985 urb->transfer_buffer_length);
2986}
2987
2988static void giveback_first_trb(struct xhci_hcd *xhci, int slot_id,
2989 unsigned int ep_index, unsigned int stream_id, int start_cycle,
2990 struct xhci_generic_trb *start_trb)
2991{
2992 /*
2993 * Pass all the TRBs to the hardware at once and make sure this write
2994 * isn't reordered.
2995 */
2996 wmb();
2997 if (start_cycle)
2998 start_trb->field[3] |= cpu_to_le32(start_cycle);
2999 else
3000 start_trb->field[3] &= cpu_to_le32(~TRB_CYCLE);
3001 xhci_ring_ep_doorbell(xhci, slot_id, ep_index, stream_id);
3002}
3003
3004/*
3005 * xHCI uses normal TRBs for both bulk and interrupt. When the interrupt
3006 * endpoint is to be serviced, the xHC will consume (at most) one TD. A TD
3007 * (comprised of sg list entries) can take several service intervals to
3008 * transmit.
3009 */
3010int xhci_queue_intr_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
3011 struct urb *urb, int slot_id, unsigned int ep_index)
3012{
3013 struct xhci_ep_ctx *ep_ctx = xhci_get_ep_ctx(xhci,
3014 xhci->devs[slot_id]->out_ctx, ep_index);
3015 int xhci_interval;
3016 int ep_interval;
3017
3018 xhci_interval = EP_INTERVAL_TO_UFRAMES(le32_to_cpu(ep_ctx->ep_info));
3019 ep_interval = urb->interval;
3020 /* Convert to microframes */
3021 if (urb->dev->speed == USB_SPEED_LOW ||
3022 urb->dev->speed == USB_SPEED_FULL)
3023 ep_interval *= 8;
3024 /* FIXME change this to a warning and a suggestion to use the new API
3025 * to set the polling interval (once the API is added).
3026 */
3027 if (xhci_interval != ep_interval) {
3028 if (printk_ratelimit())
3029 dev_dbg(&urb->dev->dev, "Driver uses different interval"
3030 " (%d microframe%s) than xHCI "
3031 "(%d microframe%s)\n",
3032 ep_interval,
3033 ep_interval == 1 ? "" : "s",
3034 xhci_interval,
3035 xhci_interval == 1 ? "" : "s");
3036 urb->interval = xhci_interval;
3037 /* Convert back to frames for LS/FS devices */
3038 if (urb->dev->speed == USB_SPEED_LOW ||
3039 urb->dev->speed == USB_SPEED_FULL)
3040 urb->interval /= 8;
3041 }
3042 return xhci_queue_bulk_tx(xhci, mem_flags, urb, slot_id, ep_index);
3043}
3044
3045/*
3046 * The TD size is the number of bytes remaining in the TD (including this TRB),
3047 * right shifted by 10.
3048 * It must fit in bits 21:17, so it can't be bigger than 31.
3049 */
3050static u32 xhci_td_remainder(unsigned int remainder)
3051{
3052 u32 max = (1 << (21 - 17 + 1)) - 1;
3053
3054 if ((remainder >> 10) >= max)
3055 return max << 17;
3056 else
3057 return (remainder >> 10) << 17;
3058}
3059
3060/*
3061 * For xHCI 1.0 host controllers, TD size is the number of packets remaining in
3062 * the TD (*not* including this TRB).
3063 *
3064 * Total TD packet count = total_packet_count =
3065 * roundup(TD size in bytes / wMaxPacketSize)
3066 *
3067 * Packets transferred up to and including this TRB = packets_transferred =
3068 * rounddown(total bytes transferred including this TRB / wMaxPacketSize)
3069 *
3070 * TD size = total_packet_count - packets_transferred
3071 *
3072 * It must fit in bits 21:17, so it can't be bigger than 31.
3073 */
3074
3075static u32 xhci_v1_0_td_remainder(int running_total, int trb_buff_len,
3076 unsigned int total_packet_count, struct urb *urb)
3077{
3078 int packets_transferred;
3079
3080 /* One TRB with a zero-length data packet. */
3081 if (running_total == 0 && trb_buff_len == 0)
3082 return 0;
3083
3084 /* All the TRB queueing functions don't count the current TRB in
3085 * running_total.
3086 */
3087 packets_transferred = (running_total + trb_buff_len) /
3088 usb_endpoint_maxp(&urb->ep->desc);
3089
3090 return xhci_td_remainder(total_packet_count - packets_transferred);
3091}
3092
3093static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
3094 struct urb *urb, int slot_id, unsigned int ep_index)
3095{
3096 struct xhci_ring *ep_ring;
3097 unsigned int num_trbs;
3098 struct urb_priv *urb_priv;
3099 struct xhci_td *td;
3100 struct scatterlist *sg;
3101 int num_sgs;
3102 int trb_buff_len, this_sg_len, running_total;
3103 unsigned int total_packet_count;
3104 bool first_trb;
3105 u64 addr;
3106 bool more_trbs_coming;
3107
3108 struct xhci_generic_trb *start_trb;
3109 int start_cycle;
3110
3111 ep_ring = xhci_urb_to_transfer_ring(xhci, urb);
3112 if (!ep_ring)
3113 return -EINVAL;
3114
3115 num_trbs = count_sg_trbs_needed(xhci, urb);
3116 num_sgs = urb->num_mapped_sgs;
3117 total_packet_count = roundup(urb->transfer_buffer_length,
3118 usb_endpoint_maxp(&urb->ep->desc));
3119
3120 trb_buff_len = prepare_transfer(xhci, xhci->devs[slot_id],
3121 ep_index, urb->stream_id,
3122 num_trbs, urb, 0, mem_flags);
3123 if (trb_buff_len < 0)
3124 return trb_buff_len;
3125
3126 urb_priv = urb->hcpriv;
3127 td = urb_priv->td[0];
3128
3129 /*
3130 * Don't give the first TRB to the hardware (by toggling the cycle bit)
3131 * until we've finished creating all the other TRBs. The ring's cycle
3132 * state may change as we enqueue the other TRBs, so save it too.
3133 */
3134 start_trb = &ep_ring->enqueue->generic;
3135 start_cycle = ep_ring->cycle_state;
3136
3137 running_total = 0;
3138 /*
3139 * How much data is in the first TRB?
3140 *
3141 * There are three forces at work for TRB buffer pointers and lengths:
3142 * 1. We don't want to walk off the end of this sg-list entry buffer.
3143 * 2. The transfer length that the driver requested may be smaller than
3144 * the amount of memory allocated for this scatter-gather list.
3145 * 3. TRBs buffers can't cross 64KB boundaries.
3146 */
3147 sg = urb->sg;
3148 addr = (u64) sg_dma_address(sg);
3149 this_sg_len = sg_dma_len(sg);
3150 trb_buff_len = TRB_MAX_BUFF_SIZE - (addr & (TRB_MAX_BUFF_SIZE - 1));
3151 trb_buff_len = min_t(int, trb_buff_len, this_sg_len);
3152 if (trb_buff_len > urb->transfer_buffer_length)
3153 trb_buff_len = urb->transfer_buffer_length;
3154
3155 first_trb = true;
3156 /* Queue the first TRB, even if it's zero-length */
3157 do {
3158 u32 field = 0;
3159 u32 length_field = 0;
3160 u32 remainder = 0;
3161
3162 /* Don't change the cycle bit of the first TRB until later */
3163 if (first_trb) {
3164 first_trb = false;
3165 if (start_cycle == 0)
3166 field |= 0x1;
3167 } else
3168 field |= ep_ring->cycle_state;
3169
3170 /* Chain all the TRBs together; clear the chain bit in the last
3171 * TRB to indicate it's the last TRB in the chain.
3172 */
3173 if (num_trbs > 1) {
3174 field |= TRB_CHAIN;
3175 } else {
3176 /* FIXME - add check for ZERO_PACKET flag before this */
3177 td->last_trb = ep_ring->enqueue;
3178 field |= TRB_IOC;
3179 }
3180
3181 /* Only set interrupt on short packet for IN endpoints */
3182 if (usb_urb_dir_in(urb))
3183 field |= TRB_ISP;
3184
3185 if (TRB_MAX_BUFF_SIZE -
3186 (addr & (TRB_MAX_BUFF_SIZE - 1)) < trb_buff_len) {
3187 xhci_warn(xhci, "WARN: sg dma xfer crosses 64KB boundaries!\n");
3188 xhci_dbg(xhci, "Next boundary at %#x, end dma = %#x\n",
3189 (unsigned int) (addr + TRB_MAX_BUFF_SIZE) & ~(TRB_MAX_BUFF_SIZE - 1),
3190 (unsigned int) addr + trb_buff_len);
3191 }
3192
3193 /* Set the TRB length, TD size, and interrupter fields. */
3194 if (xhci->hci_version < 0x100) {
3195 remainder = xhci_td_remainder(
3196 urb->transfer_buffer_length -
3197 running_total);
3198 } else {
3199 remainder = xhci_v1_0_td_remainder(running_total,
3200 trb_buff_len, total_packet_count, urb);
3201 }
3202 length_field = TRB_LEN(trb_buff_len) |
3203 remainder |
3204 TRB_INTR_TARGET(0);
3205
3206 if (num_trbs > 1)
3207 more_trbs_coming = true;
3208 else
3209 more_trbs_coming = false;
3210 queue_trb(xhci, ep_ring, more_trbs_coming,
3211 lower_32_bits(addr),
3212 upper_32_bits(addr),
3213 length_field,
3214 field | TRB_TYPE(TRB_NORMAL));
3215 --num_trbs;
3216 running_total += trb_buff_len;
3217
3218 /* Calculate length for next transfer --
3219 * Are we done queueing all the TRBs for this sg entry?
3220 */
3221 this_sg_len -= trb_buff_len;
3222 if (this_sg_len == 0) {
3223 --num_sgs;
3224 if (num_sgs == 0)
3225 break;
3226 sg = sg_next(sg);
3227 addr = (u64) sg_dma_address(sg);
3228 this_sg_len = sg_dma_len(sg);
3229 } else {
3230 addr += trb_buff_len;
3231 }
3232
3233 trb_buff_len = TRB_MAX_BUFF_SIZE -
3234 (addr & (TRB_MAX_BUFF_SIZE - 1));
3235 trb_buff_len = min_t(int, trb_buff_len, this_sg_len);
3236 if (running_total + trb_buff_len > urb->transfer_buffer_length)
3237 trb_buff_len =
3238 urb->transfer_buffer_length - running_total;
3239 } while (running_total < urb->transfer_buffer_length);
3240
3241 check_trb_math(urb, num_trbs, running_total);
3242 giveback_first_trb(xhci, slot_id, ep_index, urb->stream_id,
3243 start_cycle, start_trb);
3244 return 0;
3245}
3246
3247/* This is very similar to what ehci-q.c qtd_fill() does */
3248int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
3249 struct urb *urb, int slot_id, unsigned int ep_index)
3250{
3251 struct xhci_ring *ep_ring;
3252 struct urb_priv *urb_priv;
3253 struct xhci_td *td;
3254 int num_trbs;
3255 struct xhci_generic_trb *start_trb;
3256 bool first_trb;
3257 bool more_trbs_coming;
3258 int start_cycle;
3259 u32 field, length_field;
3260
3261 int running_total, trb_buff_len, ret;
3262 unsigned int total_packet_count;
3263 u64 addr;
3264
3265 if (urb->num_sgs)
3266 return queue_bulk_sg_tx(xhci, mem_flags, urb, slot_id, ep_index);
3267
3268 ep_ring = xhci_urb_to_transfer_ring(xhci, urb);
3269 if (!ep_ring)
3270 return -EINVAL;
3271
3272 num_trbs = 0;
3273 /* How much data is (potentially) left before the 64KB boundary? */
3274 running_total = TRB_MAX_BUFF_SIZE -
3275 (urb->transfer_dma & (TRB_MAX_BUFF_SIZE - 1));
3276 running_total &= TRB_MAX_BUFF_SIZE - 1;
3277
3278 /* If there's some data on this 64KB chunk, or we have to send a
3279 * zero-length transfer, we need at least one TRB
3280 */
3281 if (running_total != 0 || urb->transfer_buffer_length == 0)
3282 num_trbs++;
3283 /* How many more 64KB chunks to transfer, how many more TRBs? */
3284 while (running_total < urb->transfer_buffer_length) {
3285 num_trbs++;
3286 running_total += TRB_MAX_BUFF_SIZE;
3287 }
3288 /* FIXME: this doesn't deal with URB_ZERO_PACKET - need one more */
3289
3290 ret = prepare_transfer(xhci, xhci->devs[slot_id],
3291 ep_index, urb->stream_id,
3292 num_trbs, urb, 0, mem_flags);
3293 if (ret < 0)
3294 return ret;
3295
3296 urb_priv = urb->hcpriv;
3297 td = urb_priv->td[0];
3298
3299 /*
3300 * Don't give the first TRB to the hardware (by toggling the cycle bit)
3301 * until we've finished creating all the other TRBs. The ring's cycle
3302 * state may change as we enqueue the other TRBs, so save it too.
3303 */
3304 start_trb = &ep_ring->enqueue->generic;
3305 start_cycle = ep_ring->cycle_state;
3306
3307 running_total = 0;
3308 total_packet_count = roundup(urb->transfer_buffer_length,
3309 usb_endpoint_maxp(&urb->ep->desc));
3310 /* How much data is in the first TRB? */
3311 addr = (u64) urb->transfer_dma;
3312 trb_buff_len = TRB_MAX_BUFF_SIZE -
3313 (urb->transfer_dma & (TRB_MAX_BUFF_SIZE - 1));
3314 if (trb_buff_len > urb->transfer_buffer_length)
3315 trb_buff_len = urb->transfer_buffer_length;
3316
3317 first_trb = true;
3318
3319 /* Queue the first TRB, even if it's zero-length */
3320 do {
3321 u32 remainder = 0;
3322 field = 0;
3323
3324 /* Don't change the cycle bit of the first TRB until later */
3325 if (first_trb) {
3326 first_trb = false;
3327 if (start_cycle == 0)
3328 field |= 0x1;
3329 } else
3330 field |= ep_ring->cycle_state;
3331
3332 /* Chain all the TRBs together; clear the chain bit in the last
3333 * TRB to indicate it's the last TRB in the chain.
3334 */
3335 if (num_trbs > 1) {
3336 field |= TRB_CHAIN;
3337 } else {
3338 /* FIXME - add check for ZERO_PACKET flag before this */
3339 td->last_trb = ep_ring->enqueue;
3340 field |= TRB_IOC;
3341 }
3342
3343 /* Only set interrupt on short packet for IN endpoints */
3344 if (usb_urb_dir_in(urb))
3345 field |= TRB_ISP;
3346
3347 /* Set the TRB length, TD size, and interrupter fields. */
3348 if (xhci->hci_version < 0x100) {
3349 remainder = xhci_td_remainder(
3350 urb->transfer_buffer_length -
3351 running_total);
3352 } else {
3353 remainder = xhci_v1_0_td_remainder(running_total,
3354 trb_buff_len, total_packet_count, urb);
3355 }
3356 length_field = TRB_LEN(trb_buff_len) |
3357 remainder |
3358 TRB_INTR_TARGET(0);
3359
3360 if (num_trbs > 1)
3361 more_trbs_coming = true;
3362 else
3363 more_trbs_coming = false;
3364 queue_trb(xhci, ep_ring, more_trbs_coming,
3365 lower_32_bits(addr),
3366 upper_32_bits(addr),
3367 length_field,
3368 field | TRB_TYPE(TRB_NORMAL));
3369 --num_trbs;
3370 running_total += trb_buff_len;
3371
3372 /* Calculate length for next transfer */
3373 addr += trb_buff_len;
3374 trb_buff_len = urb->transfer_buffer_length - running_total;
3375 if (trb_buff_len > TRB_MAX_BUFF_SIZE)
3376 trb_buff_len = TRB_MAX_BUFF_SIZE;
3377 } while (running_total < urb->transfer_buffer_length);
3378
3379 check_trb_math(urb, num_trbs, running_total);
3380 giveback_first_trb(xhci, slot_id, ep_index, urb->stream_id,
3381 start_cycle, start_trb);
3382 return 0;
3383}
3384
3385/* Caller must have locked xhci->lock */
3386int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
3387 struct urb *urb, int slot_id, unsigned int ep_index)
3388{
3389 struct xhci_ring *ep_ring;
3390 int num_trbs;
3391 int ret;
3392 struct usb_ctrlrequest *setup;
3393 struct xhci_generic_trb *start_trb;
3394 int start_cycle;
3395 u32 field, length_field;
3396 struct urb_priv *urb_priv;
3397 struct xhci_td *td;
3398
3399 ep_ring = xhci_urb_to_transfer_ring(xhci, urb);
3400 if (!ep_ring)
3401 return -EINVAL;
3402
3403 /*
3404 * Need to copy setup packet into setup TRB, so we can't use the setup
3405 * DMA address.
3406 */
3407 if (!urb->setup_packet)
3408 return -EINVAL;
3409
3410 /* 1 TRB for setup, 1 for status */
3411 num_trbs = 2;
3412 /*
3413 * Don't need to check if we need additional event data and normal TRBs,
3414 * since data in control transfers will never get bigger than 16MB
3415 * XXX: can we get a buffer that crosses 64KB boundaries?
3416 */
3417 if (urb->transfer_buffer_length > 0)
3418 num_trbs++;
3419 ret = prepare_transfer(xhci, xhci->devs[slot_id],
3420 ep_index, urb->stream_id,
3421 num_trbs, urb, 0, mem_flags);
3422 if (ret < 0)
3423 return ret;
3424
3425 urb_priv = urb->hcpriv;
3426 td = urb_priv->td[0];
3427
3428 /*
3429 * Don't give the first TRB to the hardware (by toggling the cycle bit)
3430 * until we've finished creating all the other TRBs. The ring's cycle
3431 * state may change as we enqueue the other TRBs, so save it too.
3432 */
3433 start_trb = &ep_ring->enqueue->generic;
3434 start_cycle = ep_ring->cycle_state;
3435
3436 /* Queue setup TRB - see section 6.4.1.2.1 */
3437 /* FIXME better way to translate setup_packet into two u32 fields? */
3438 setup = (struct usb_ctrlrequest *) urb->setup_packet;
3439 field = 0;
3440 field |= TRB_IDT | TRB_TYPE(TRB_SETUP);
3441 if (start_cycle == 0)
3442 field |= 0x1;
3443
3444 /* xHCI 1.0 6.4.1.2.1: Transfer Type field */
3445 if (xhci->hci_version == 0x100) {
3446 if (urb->transfer_buffer_length > 0) {
3447 if (setup->bRequestType & USB_DIR_IN)
3448 field |= TRB_TX_TYPE(TRB_DATA_IN);
3449 else
3450 field |= TRB_TX_TYPE(TRB_DATA_OUT);
3451 }
3452 }
3453
3454 queue_trb(xhci, ep_ring, true,
3455 setup->bRequestType | setup->bRequest << 8 | le16_to_cpu(setup->wValue) << 16,
3456 le16_to_cpu(setup->wIndex) | le16_to_cpu(setup->wLength) << 16,
3457 TRB_LEN(8) | TRB_INTR_TARGET(0),
3458 /* Immediate data in pointer */
3459 field);
3460
3461 /* If there's data, queue data TRBs */
3462 /* Only set interrupt on short packet for IN endpoints */
3463 if (usb_urb_dir_in(urb))
3464 field = TRB_ISP | TRB_TYPE(TRB_DATA);
3465 else
3466 field = TRB_TYPE(TRB_DATA);
3467
3468 length_field = TRB_LEN(urb->transfer_buffer_length) |
3469 xhci_td_remainder(urb->transfer_buffer_length) |
3470 TRB_INTR_TARGET(0);
3471 if (urb->transfer_buffer_length > 0) {
3472 if (setup->bRequestType & USB_DIR_IN)
3473 field |= TRB_DIR_IN;
3474 queue_trb(xhci, ep_ring, true,
3475 lower_32_bits(urb->transfer_dma),
3476 upper_32_bits(urb->transfer_dma),
3477 length_field,
3478 field | ep_ring->cycle_state);
3479 }
3480
3481 /* Save the DMA address of the last TRB in the TD */
3482 td->last_trb = ep_ring->enqueue;
3483
3484 /* Queue status TRB - see Table 7 and sections 4.11.2.2 and 6.4.1.2.3 */
3485 /* If the device sent data, the status stage is an OUT transfer */
3486 if (urb->transfer_buffer_length > 0 && setup->bRequestType & USB_DIR_IN)
3487 field = 0;
3488 else
3489 field = TRB_DIR_IN;
3490 queue_trb(xhci, ep_ring, false,
3491 0,
3492 0,
3493 TRB_INTR_TARGET(0),
3494 /* Event on completion */
3495 field | TRB_IOC | TRB_TYPE(TRB_STATUS) | ep_ring->cycle_state);
3496
3497 giveback_first_trb(xhci, slot_id, ep_index, 0,
3498 start_cycle, start_trb);
3499 return 0;
3500}
3501
3502static int count_isoc_trbs_needed(struct xhci_hcd *xhci,
3503 struct urb *urb, int i)
3504{
3505 int num_trbs = 0;
3506 u64 addr, td_len;
3507
3508 addr = (u64) (urb->transfer_dma + urb->iso_frame_desc[i].offset);
3509 td_len = urb->iso_frame_desc[i].length;
3510
3511 num_trbs = DIV_ROUND_UP(td_len + (addr & (TRB_MAX_BUFF_SIZE - 1)),
3512 TRB_MAX_BUFF_SIZE);
3513 if (num_trbs == 0)
3514 num_trbs++;
3515
3516 return num_trbs;
3517}
3518
3519/*
3520 * The transfer burst count field of the isochronous TRB defines the number of
3521 * bursts that are required to move all packets in this TD. Only SuperSpeed
3522 * devices can burst up to bMaxBurst number of packets per service interval.
3523 * This field is zero based, meaning a value of zero in the field means one
3524 * burst. Basically, for everything but SuperSpeed devices, this field will be
3525 * zero. Only xHCI 1.0 host controllers support this field.
3526 */
3527static unsigned int xhci_get_burst_count(struct xhci_hcd *xhci,
3528 struct usb_device *udev,
3529 struct urb *urb, unsigned int total_packet_count)
3530{
3531 unsigned int max_burst;
3532
3533 if (xhci->hci_version < 0x100 || udev->speed != USB_SPEED_SUPER)
3534 return 0;
3535
3536 max_burst = urb->ep->ss_ep_comp.bMaxBurst;
3537 return roundup(total_packet_count, max_burst + 1) - 1;
3538}
3539
3540/*
3541 * Returns the number of packets in the last "burst" of packets. This field is
3542 * valid for all speeds of devices. USB 2.0 devices can only do one "burst", so
3543 * the last burst packet count is equal to the total number of packets in the
3544 * TD. SuperSpeed endpoints can have up to 3 bursts. All but the last burst
3545 * must contain (bMaxBurst + 1) number of packets, but the last burst can
3546 * contain 1 to (bMaxBurst + 1) packets.
3547 */
3548static unsigned int xhci_get_last_burst_packet_count(struct xhci_hcd *xhci,
3549 struct usb_device *udev,
3550 struct urb *urb, unsigned int total_packet_count)
3551{
3552 unsigned int max_burst;
3553 unsigned int residue;
3554
3555 if (xhci->hci_version < 0x100)
3556 return 0;
3557
3558 switch (udev->speed) {
3559 case USB_SPEED_SUPER:
3560 /* bMaxBurst is zero based: 0 means 1 packet per burst */
3561 max_burst = urb->ep->ss_ep_comp.bMaxBurst;
3562 residue = total_packet_count % (max_burst + 1);
3563 /* If residue is zero, the last burst contains (max_burst + 1)
3564 * number of packets, but the TLBPC field is zero-based.
3565 */
3566 if (residue == 0)
3567 return max_burst;
3568 return residue - 1;
3569 default:
3570 if (total_packet_count == 0)
3571 return 0;
3572 return total_packet_count - 1;
3573 }
3574}
3575
3576/* This is for isoc transfer */
3577static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
3578 struct urb *urb, int slot_id, unsigned int ep_index)
3579{
3580 struct xhci_ring *ep_ring;
3581 struct urb_priv *urb_priv;
3582 struct xhci_td *td;
3583 int num_tds, trbs_per_td;
3584 struct xhci_generic_trb *start_trb;
3585 bool first_trb;
3586 int start_cycle;
3587 u32 field, length_field;
3588 int running_total, trb_buff_len, td_len, td_remain_len, ret;
3589 u64 start_addr, addr;
3590 int i, j;
3591 bool more_trbs_coming;
3592
3593 ep_ring = xhci->devs[slot_id]->eps[ep_index].ring;
3594
3595 num_tds = urb->number_of_packets;
3596 if (num_tds < 1) {
3597 xhci_dbg(xhci, "Isoc URB with zero packets?\n");
3598 return -EINVAL;
3599 }
3600
3601 start_addr = (u64) urb->transfer_dma;
3602 start_trb = &ep_ring->enqueue->generic;
3603 start_cycle = ep_ring->cycle_state;
3604
3605 urb_priv = urb->hcpriv;
3606 /* Queue the first TRB, even if it's zero-length */
3607 for (i = 0; i < num_tds; i++) {
3608 unsigned int total_packet_count;
3609 unsigned int burst_count;
3610 unsigned int residue;
3611
3612 first_trb = true;
3613 running_total = 0;
3614 addr = start_addr + urb->iso_frame_desc[i].offset;
3615 td_len = urb->iso_frame_desc[i].length;
3616 td_remain_len = td_len;
3617 total_packet_count = roundup(td_len,
3618 usb_endpoint_maxp(&urb->ep->desc));
3619 /* A zero-length transfer still involves at least one packet. */
3620 if (total_packet_count == 0)
3621 total_packet_count++;
3622 burst_count = xhci_get_burst_count(xhci, urb->dev, urb,
3623 total_packet_count);
3624 residue = xhci_get_last_burst_packet_count(xhci,
3625 urb->dev, urb, total_packet_count);
3626
3627 trbs_per_td = count_isoc_trbs_needed(xhci, urb, i);
3628
3629 ret = prepare_transfer(xhci, xhci->devs[slot_id], ep_index,
3630 urb->stream_id, trbs_per_td, urb, i, mem_flags);
3631 if (ret < 0) {
3632 if (i == 0)
3633 return ret;
3634 goto cleanup;
3635 }
3636
3637 td = urb_priv->td[i];
3638 for (j = 0; j < trbs_per_td; j++) {
3639 u32 remainder = 0;
3640 field = TRB_TBC(burst_count) | TRB_TLBPC(residue);
3641
3642 if (first_trb) {
3643 /* Queue the isoc TRB */
3644 field |= TRB_TYPE(TRB_ISOC);
3645 /* Assume URB_ISO_ASAP is set */
3646 field |= TRB_SIA;
3647 if (i == 0) {
3648 if (start_cycle == 0)
3649 field |= 0x1;
3650 } else
3651 field |= ep_ring->cycle_state;
3652 first_trb = false;
3653 } else {
3654 /* Queue other normal TRBs */
3655 field |= TRB_TYPE(TRB_NORMAL);
3656 field |= ep_ring->cycle_state;
3657 }
3658
3659 /* Only set interrupt on short packet for IN EPs */
3660 if (usb_urb_dir_in(urb))
3661 field |= TRB_ISP;
3662
3663 /* Chain all the TRBs together; clear the chain bit in
3664 * the last TRB to indicate it's the last TRB in the
3665 * chain.
3666 */
3667 if (j < trbs_per_td - 1) {
3668 field |= TRB_CHAIN;
3669 more_trbs_coming = true;
3670 } else {
3671 td->last_trb = ep_ring->enqueue;
3672 field |= TRB_IOC;
3673 if (xhci->hci_version == 0x100 &&
3674 !(xhci->quirks &
3675 XHCI_AVOID_BEI)) {
3676 /* Set BEI bit except for the last td */
3677 if (i < num_tds - 1)
3678 field |= TRB_BEI;
3679 }
3680 more_trbs_coming = false;
3681 }
3682
3683 /* Calculate TRB length */
3684 trb_buff_len = TRB_MAX_BUFF_SIZE -
3685 (addr & ((1 << TRB_MAX_BUFF_SHIFT) - 1));
3686 if (trb_buff_len > td_remain_len)
3687 trb_buff_len = td_remain_len;
3688
3689 /* Set the TRB length, TD size, & interrupter fields. */
3690 if (xhci->hci_version < 0x100) {
3691 remainder = xhci_td_remainder(
3692 td_len - running_total);
3693 } else {
3694 remainder = xhci_v1_0_td_remainder(
3695 running_total, trb_buff_len,
3696 total_packet_count, urb);
3697 }
3698 length_field = TRB_LEN(trb_buff_len) |
3699 remainder |
3700 TRB_INTR_TARGET(0);
3701
3702 queue_trb(xhci, ep_ring, more_trbs_coming,
3703 lower_32_bits(addr),
3704 upper_32_bits(addr),
3705 length_field,
3706 field);
3707 running_total += trb_buff_len;
3708
3709 addr += trb_buff_len;
3710 td_remain_len -= trb_buff_len;
3711 }
3712
3713 /* Check TD length */
3714 if (running_total != td_len) {
3715 xhci_err(xhci, "ISOC TD length unmatch\n");
3716 ret = -EINVAL;
3717 goto cleanup;
3718 }
3719 }
3720
3721 if (xhci_to_hcd(xhci)->self.bandwidth_isoc_reqs == 0) {
3722 if (xhci->quirks & XHCI_AMD_PLL_FIX)
3723 usb_amd_quirk_pll_disable();
3724 }
3725 xhci_to_hcd(xhci)->self.bandwidth_isoc_reqs++;
3726
3727 giveback_first_trb(xhci, slot_id, ep_index, urb->stream_id,
3728 start_cycle, start_trb);
3729 return 0;
3730cleanup:
3731 /* Clean up a partially enqueued isoc transfer. */
3732
3733 for (i--; i >= 0; i--)
3734 list_del_init(&urb_priv->td[i]->td_list);
3735
3736 /* Use the first TD as a temporary variable to turn the TDs we've queued
3737 * into No-ops with a software-owned cycle bit. That way the hardware
3738 * won't accidentally start executing bogus TDs when we partially
3739 * overwrite them. td->first_trb and td->start_seg are already set.
3740 */
3741 urb_priv->td[0]->last_trb = ep_ring->enqueue;
3742 /* Every TRB except the first & last will have its cycle bit flipped. */
3743 td_to_noop(xhci, ep_ring, urb_priv->td[0], true);
3744
3745 /* Reset the ring enqueue back to the first TRB and its cycle bit. */
3746 ep_ring->enqueue = urb_priv->td[0]->first_trb;
3747 ep_ring->enq_seg = urb_priv->td[0]->start_seg;
3748 ep_ring->cycle_state = start_cycle;
3749 ep_ring->num_trbs_free = ep_ring->num_trbs_free_temp;
3750 usb_hcd_unlink_urb_from_ep(bus_to_hcd(urb->dev->bus), urb);
3751 return ret;
3752}
3753
3754/*
3755 * Check transfer ring to guarantee there is enough room for the urb.
3756 * Update ISO URB start_frame and interval.
3757 * Update interval as xhci_queue_intr_tx does. Just use xhci frame_index to
3758 * update the urb->start_frame by now.
3759 * Always assume URB_ISO_ASAP set, and NEVER use urb->start_frame as input.
3760 */
3761int xhci_queue_isoc_tx_prepare(struct xhci_hcd *xhci, gfp_t mem_flags,
3762 struct urb *urb, int slot_id, unsigned int ep_index)
3763{
3764 struct xhci_virt_device *xdev;
3765 struct xhci_ring *ep_ring;
3766 struct xhci_ep_ctx *ep_ctx;
3767 int start_frame;
3768 int xhci_interval;
3769 int ep_interval;
3770 int num_tds, num_trbs, i;
3771 int ret;
3772
3773 xdev = xhci->devs[slot_id];
3774 ep_ring = xdev->eps[ep_index].ring;
3775 ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index);
3776
3777 num_trbs = 0;
3778 num_tds = urb->number_of_packets;
3779 for (i = 0; i < num_tds; i++)
3780 num_trbs += count_isoc_trbs_needed(xhci, urb, i);
3781
3782 /* Check the ring to guarantee there is enough room for the whole urb.
3783 * Do not insert any td of the urb to the ring if the check failed.
3784 */
3785 ret = prepare_ring(xhci, ep_ring, le32_to_cpu(ep_ctx->ep_info) & EP_STATE_MASK,
3786 num_trbs, mem_flags);
3787 if (ret)
3788 return ret;
3789
3790 start_frame = xhci_readl(xhci, &xhci->run_regs->microframe_index);
3791 start_frame &= 0x3fff;
3792
3793 urb->start_frame = start_frame;
3794 if (urb->dev->speed == USB_SPEED_LOW ||
3795 urb->dev->speed == USB_SPEED_FULL)
3796 urb->start_frame >>= 3;
3797
3798 xhci_interval = EP_INTERVAL_TO_UFRAMES(le32_to_cpu(ep_ctx->ep_info));
3799 ep_interval = urb->interval;
3800 /* Convert to microframes */
3801 if (urb->dev->speed == USB_SPEED_LOW ||
3802 urb->dev->speed == USB_SPEED_FULL)
3803 ep_interval *= 8;
3804 /* FIXME change this to a warning and a suggestion to use the new API
3805 * to set the polling interval (once the API is added).
3806 */
3807 if (xhci_interval != ep_interval) {
3808 if (printk_ratelimit())
3809 dev_dbg(&urb->dev->dev, "Driver uses different interval"
3810 " (%d microframe%s) than xHCI "
3811 "(%d microframe%s)\n",
3812 ep_interval,
3813 ep_interval == 1 ? "" : "s",
3814 xhci_interval,
3815 xhci_interval == 1 ? "" : "s");
3816 urb->interval = xhci_interval;
3817 /* Convert back to frames for LS/FS devices */
3818 if (urb->dev->speed == USB_SPEED_LOW ||
3819 urb->dev->speed == USB_SPEED_FULL)
3820 urb->interval /= 8;
3821 }
3822 ep_ring->num_trbs_free_temp = ep_ring->num_trbs_free;
3823
3824 return xhci_queue_isoc_tx(xhci, mem_flags, urb, slot_id, ep_index);
3825}
3826
3827/**** Command Ring Operations ****/
3828
3829/* Generic function for queueing a command TRB on the command ring.
3830 * Check to make sure there's room on the command ring for one command TRB.
3831 * Also check that there's room reserved for commands that must not fail.
3832 * If this is a command that must not fail, meaning command_must_succeed = TRUE,
3833 * then only check for the number of reserved spots.
3834 * Don't decrement xhci->cmd_ring_reserved_trbs after we've queued the TRB
3835 * because the command event handler may want to resubmit a failed command.
3836 */
3837static int queue_command(struct xhci_hcd *xhci, u32 field1, u32 field2,
3838 u32 field3, u32 field4, bool command_must_succeed)
3839{
3840 int reserved_trbs = xhci->cmd_ring_reserved_trbs;
3841 int ret;
3842
3843 if (!command_must_succeed)
3844 reserved_trbs++;
3845
3846 ret = prepare_ring(xhci, xhci->cmd_ring, EP_STATE_RUNNING,
3847 reserved_trbs, GFP_ATOMIC);
3848 if (ret < 0) {
3849 xhci_err(xhci, "ERR: No room for command on command ring\n");
3850 if (command_must_succeed)
3851 xhci_err(xhci, "ERR: Reserved TRB counting for "
3852 "unfailable commands failed.\n");
3853 return ret;
3854 }
3855 queue_trb(xhci, xhci->cmd_ring, false, field1, field2, field3,
3856 field4 | xhci->cmd_ring->cycle_state);
3857 return 0;
3858}
3859
3860/* Queue a slot enable or disable request on the command ring */
3861int xhci_queue_slot_control(struct xhci_hcd *xhci, u32 trb_type, u32 slot_id)
3862{
3863 return queue_command(xhci, 0, 0, 0,
3864 TRB_TYPE(trb_type) | SLOT_ID_FOR_TRB(slot_id), false);
3865}
3866
3867/* Queue an address device command TRB */
3868int xhci_queue_address_device(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
3869 u32 slot_id)
3870{
3871 return queue_command(xhci, lower_32_bits(in_ctx_ptr),
3872 upper_32_bits(in_ctx_ptr), 0,
3873 TRB_TYPE(TRB_ADDR_DEV) | SLOT_ID_FOR_TRB(slot_id),
3874 false);
3875}
3876
3877int xhci_queue_vendor_command(struct xhci_hcd *xhci,
3878 u32 field1, u32 field2, u32 field3, u32 field4)
3879{
3880 return queue_command(xhci, field1, field2, field3, field4, false);
3881}
3882
3883/* Queue a reset device command TRB */
3884int xhci_queue_reset_device(struct xhci_hcd *xhci, u32 slot_id)
3885{
3886 return queue_command(xhci, 0, 0, 0,
3887 TRB_TYPE(TRB_RESET_DEV) | SLOT_ID_FOR_TRB(slot_id),
3888 false);
3889}
3890
3891/* Queue a configure endpoint command TRB */
3892int xhci_queue_configure_endpoint(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
3893 u32 slot_id, bool command_must_succeed)
3894{
3895 return queue_command(xhci, lower_32_bits(in_ctx_ptr),
3896 upper_32_bits(in_ctx_ptr), 0,
3897 TRB_TYPE(TRB_CONFIG_EP) | SLOT_ID_FOR_TRB(slot_id),
3898 command_must_succeed);
3899}
3900
3901/* Queue an evaluate context command TRB */
3902int xhci_queue_evaluate_context(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
3903 u32 slot_id, bool command_must_succeed)
3904{
3905 return queue_command(xhci, lower_32_bits(in_ctx_ptr),
3906 upper_32_bits(in_ctx_ptr), 0,
3907 TRB_TYPE(TRB_EVAL_CONTEXT) | SLOT_ID_FOR_TRB(slot_id),
3908 command_must_succeed);
3909}
3910
3911/*
3912 * Suspend is set to indicate "Stop Endpoint Command" is being issued to stop
3913 * activity on an endpoint that is about to be suspended.
3914 */
3915int xhci_queue_stop_endpoint(struct xhci_hcd *xhci, int slot_id,
3916 unsigned int ep_index, int suspend)
3917{
3918 u32 trb_slot_id = SLOT_ID_FOR_TRB(slot_id);
3919 u32 trb_ep_index = EP_ID_FOR_TRB(ep_index);
3920 u32 type = TRB_TYPE(TRB_STOP_RING);
3921 u32 trb_suspend = SUSPEND_PORT_FOR_TRB(suspend);
3922
3923 return queue_command(xhci, 0, 0, 0,
3924 trb_slot_id | trb_ep_index | type | trb_suspend, false);
3925}
3926
3927/* Set Transfer Ring Dequeue Pointer command.
3928 * This should not be used for endpoints that have streams enabled.
3929 */
3930static int queue_set_tr_deq(struct xhci_hcd *xhci, int slot_id,
3931 unsigned int ep_index, unsigned int stream_id,
3932 struct xhci_segment *deq_seg,
3933 union xhci_trb *deq_ptr, u32 cycle_state)
3934{
3935 dma_addr_t addr;
3936 u32 trb_slot_id = SLOT_ID_FOR_TRB(slot_id);
3937 u32 trb_ep_index = EP_ID_FOR_TRB(ep_index);
3938 u32 trb_stream_id = STREAM_ID_FOR_TRB(stream_id);
3939 u32 type = TRB_TYPE(TRB_SET_DEQ);
3940 struct xhci_virt_ep *ep;
3941
3942 addr = xhci_trb_virt_to_dma(deq_seg, deq_ptr);
3943 if (addr == 0) {
3944 xhci_warn(xhci, "WARN Cannot submit Set TR Deq Ptr\n");
3945 xhci_warn(xhci, "WARN deq seg = %p, deq pt = %p\n",
3946 deq_seg, deq_ptr);
3947 return 0;
3948 }
3949 ep = &xhci->devs[slot_id]->eps[ep_index];
3950 if ((ep->ep_state & SET_DEQ_PENDING)) {
3951 xhci_warn(xhci, "WARN Cannot submit Set TR Deq Ptr\n");
3952 xhci_warn(xhci, "A Set TR Deq Ptr command is pending.\n");
3953 return 0;
3954 }
3955 ep->queued_deq_seg = deq_seg;
3956 ep->queued_deq_ptr = deq_ptr;
3957 return queue_command(xhci, lower_32_bits(addr) | cycle_state,
3958 upper_32_bits(addr), trb_stream_id,
3959 trb_slot_id | trb_ep_index | type, false);
3960}
3961
3962int xhci_queue_reset_ep(struct xhci_hcd *xhci, int slot_id,
3963 unsigned int ep_index)
3964{
3965 u32 trb_slot_id = SLOT_ID_FOR_TRB(slot_id);
3966 u32 trb_ep_index = EP_ID_FOR_TRB(ep_index);
3967 u32 type = TRB_TYPE(TRB_RESET_EP);
3968
3969 return queue_command(xhci, 0, 0, 0, trb_slot_id | trb_ep_index | type,
3970 false);
3971}