Loading...
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * driver for NXP USB Host devices
4 *
5 * Currently supported OHCI host devices:
6 * - NXP LPC32xx
7 *
8 * Authors: Dmitry Chigirev <source@mvista.com>
9 * Vitaly Wool <vitalywool@gmail.com>
10 *
11 * register initialization is based on code examples provided by Philips
12 * Copyright (c) 2005 Koninklijke Philips Electronics N.V.
13 *
14 * NOTE: This driver does not have suspend/resume functionality
15 * This driver is intended for engineering development purposes only
16 *
17 * 2005-2006 (c) MontaVista Software, Inc.
18 */
19#include <linux/clk.h>
20#include <linux/dma-mapping.h>
21#include <linux/io.h>
22#include <linux/i2c.h>
23#include <linux/module.h>
24#include <linux/of.h>
25#include <linux/platform_device.h>
26#include <linux/usb/isp1301.h>
27#include <linux/usb.h>
28#include <linux/usb/hcd.h>
29
30#include "ohci.h"
31
32#define USB_CONFIG_BASE 0x31020000
33
34/* USB_OTG_STAT_CONTROL bit defines */
35#define TRANSPARENT_I2C_EN (1 << 7)
36#define HOST_EN (1 << 0)
37
38/* On LPC32xx, those are undefined */
39#ifndef start_int_set_falling_edge
40#define start_int_set_falling_edge(irq)
41#define start_int_set_rising_edge(irq)
42#define start_int_ack(irq)
43#define start_int_mask(irq)
44#define start_int_umask(irq)
45#endif
46
47#define DRIVER_DESC "OHCI NXP driver"
48
49static const char hcd_name[] = "ohci-nxp";
50static struct hc_driver __read_mostly ohci_nxp_hc_driver;
51
52static struct i2c_client *isp1301_i2c_client;
53
54static struct clk *usb_host_clk;
55
56static void isp1301_configure_lpc32xx(void)
57{
58 /* LPC32XX only supports DAT_SE0 USB mode */
59 /* This sequence is important */
60
61 /* Disable transparent UART mode first */
62 i2c_smbus_write_byte_data(isp1301_i2c_client,
63 (ISP1301_I2C_MODE_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR),
64 MC1_UART_EN);
65 i2c_smbus_write_byte_data(isp1301_i2c_client,
66 (ISP1301_I2C_MODE_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR),
67 ~MC1_SPEED_REG);
68 i2c_smbus_write_byte_data(isp1301_i2c_client,
69 ISP1301_I2C_MODE_CONTROL_1, MC1_SPEED_REG);
70 i2c_smbus_write_byte_data(isp1301_i2c_client,
71 (ISP1301_I2C_MODE_CONTROL_2 | ISP1301_I2C_REG_CLEAR_ADDR),
72 ~0);
73 i2c_smbus_write_byte_data(isp1301_i2c_client,
74 ISP1301_I2C_MODE_CONTROL_2,
75 (MC2_BI_DI | MC2_PSW_EN | MC2_SPD_SUSP_CTRL));
76 i2c_smbus_write_byte_data(isp1301_i2c_client,
77 (ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR), ~0);
78 i2c_smbus_write_byte_data(isp1301_i2c_client,
79 ISP1301_I2C_MODE_CONTROL_1, MC1_DAT_SE0);
80 i2c_smbus_write_byte_data(isp1301_i2c_client,
81 ISP1301_I2C_OTG_CONTROL_1,
82 (OTG1_DM_PULLDOWN | OTG1_DP_PULLDOWN));
83 i2c_smbus_write_byte_data(isp1301_i2c_client,
84 (ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR),
85 (OTG1_DM_PULLUP | OTG1_DP_PULLUP));
86 i2c_smbus_write_byte_data(isp1301_i2c_client,
87 ISP1301_I2C_INTERRUPT_LATCH | ISP1301_I2C_REG_CLEAR_ADDR, ~0);
88 i2c_smbus_write_byte_data(isp1301_i2c_client,
89 ISP1301_I2C_INTERRUPT_FALLING | ISP1301_I2C_REG_CLEAR_ADDR,
90 ~0);
91 i2c_smbus_write_byte_data(isp1301_i2c_client,
92 ISP1301_I2C_INTERRUPT_RISING | ISP1301_I2C_REG_CLEAR_ADDR, ~0);
93
94 printk(KERN_INFO "ISP1301 Vendor ID : 0x%04x\n",
95 i2c_smbus_read_word_data(isp1301_i2c_client, 0x00));
96 printk(KERN_INFO "ISP1301 Product ID : 0x%04x\n",
97 i2c_smbus_read_word_data(isp1301_i2c_client, 0x02));
98 printk(KERN_INFO "ISP1301 Version ID : 0x%04x\n",
99 i2c_smbus_read_word_data(isp1301_i2c_client, 0x14));
100}
101
102static void isp1301_configure(void)
103{
104 isp1301_configure_lpc32xx();
105}
106
107static inline void isp1301_vbus_on(void)
108{
109 i2c_smbus_write_byte_data(isp1301_i2c_client, ISP1301_I2C_OTG_CONTROL_1,
110 OTG1_VBUS_DRV);
111}
112
113static inline void isp1301_vbus_off(void)
114{
115 i2c_smbus_write_byte_data(isp1301_i2c_client,
116 ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR,
117 OTG1_VBUS_DRV);
118}
119
120static void ohci_nxp_start_hc(void)
121{
122 void __iomem *usb_otg_stat_control = ioremap(USB_CONFIG_BASE + 0x110, 4);
123 unsigned long tmp;
124
125 if (WARN_ON(!usb_otg_stat_control))
126 return;
127
128 tmp = __raw_readl(usb_otg_stat_control) | HOST_EN;
129
130 __raw_writel(tmp, usb_otg_stat_control);
131 isp1301_vbus_on();
132
133 iounmap(usb_otg_stat_control);
134}
135
136static void ohci_nxp_stop_hc(void)
137{
138 void __iomem *usb_otg_stat_control = ioremap(USB_CONFIG_BASE + 0x110, 4);
139 unsigned long tmp;
140
141 if (WARN_ON(!usb_otg_stat_control))
142 return;
143
144 isp1301_vbus_off();
145 tmp = __raw_readl(usb_otg_stat_control) & ~HOST_EN;
146 __raw_writel(tmp, usb_otg_stat_control);
147
148 iounmap(usb_otg_stat_control);
149}
150
151static int ohci_hcd_nxp_probe(struct platform_device *pdev)
152{
153 struct usb_hcd *hcd = NULL;
154 const struct hc_driver *driver = &ohci_nxp_hc_driver;
155 struct resource *res;
156 int ret = 0, irq;
157 struct device_node *isp1301_node;
158
159 if (pdev->dev.of_node) {
160 isp1301_node = of_parse_phandle(pdev->dev.of_node,
161 "transceiver", 0);
162 } else {
163 isp1301_node = NULL;
164 }
165
166 isp1301_i2c_client = isp1301_get_client(isp1301_node);
167 of_node_put(isp1301_node);
168 if (!isp1301_i2c_client)
169 return -EPROBE_DEFER;
170
171 ret = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
172 if (ret)
173 goto fail_disable;
174
175 dev_dbg(&pdev->dev, "%s: " DRIVER_DESC " (nxp)\n", hcd_name);
176 if (usb_disabled()) {
177 dev_err(&pdev->dev, "USB is disabled\n");
178 ret = -ENODEV;
179 goto fail_disable;
180 }
181
182 /* Enable USB host clock */
183 usb_host_clk = devm_clk_get(&pdev->dev, NULL);
184 if (IS_ERR(usb_host_clk)) {
185 dev_err(&pdev->dev, "failed to acquire USB OHCI clock\n");
186 ret = PTR_ERR(usb_host_clk);
187 goto fail_disable;
188 }
189
190 ret = clk_prepare_enable(usb_host_clk);
191 if (ret < 0) {
192 dev_err(&pdev->dev, "failed to start USB OHCI clock\n");
193 goto fail_disable;
194 }
195
196 isp1301_configure();
197
198 hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
199 if (!hcd) {
200 dev_err(&pdev->dev, "Failed to allocate HC buffer\n");
201 ret = -ENOMEM;
202 goto fail_hcd;
203 }
204
205 hcd->regs = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
206 if (IS_ERR(hcd->regs)) {
207 ret = PTR_ERR(hcd->regs);
208 goto fail_resource;
209 }
210 hcd->rsrc_start = res->start;
211 hcd->rsrc_len = resource_size(res);
212
213 irq = platform_get_irq(pdev, 0);
214 if (irq < 0) {
215 ret = -ENXIO;
216 goto fail_resource;
217 }
218
219 ohci_nxp_start_hc();
220 platform_set_drvdata(pdev, hcd);
221
222 dev_info(&pdev->dev, "at 0x%p, irq %d\n", hcd->regs, hcd->irq);
223 ret = usb_add_hcd(hcd, irq, 0);
224 if (ret == 0) {
225 device_wakeup_enable(hcd->self.controller);
226 return ret;
227 }
228
229 ohci_nxp_stop_hc();
230fail_resource:
231 usb_put_hcd(hcd);
232fail_hcd:
233 clk_disable_unprepare(usb_host_clk);
234fail_disable:
235 isp1301_i2c_client = NULL;
236 return ret;
237}
238
239static void ohci_hcd_nxp_remove(struct platform_device *pdev)
240{
241 struct usb_hcd *hcd = platform_get_drvdata(pdev);
242
243 usb_remove_hcd(hcd);
244 ohci_nxp_stop_hc();
245 usb_put_hcd(hcd);
246 clk_disable_unprepare(usb_host_clk);
247 isp1301_i2c_client = NULL;
248}
249
250/* work with hotplug and coldplug */
251MODULE_ALIAS("platform:usb-ohci");
252
253#ifdef CONFIG_OF
254static const struct of_device_id ohci_hcd_nxp_match[] = {
255 { .compatible = "nxp,ohci-nxp" },
256 {},
257};
258MODULE_DEVICE_TABLE(of, ohci_hcd_nxp_match);
259#endif
260
261static struct platform_driver ohci_hcd_nxp_driver = {
262 .driver = {
263 .name = "usb-ohci",
264 .of_match_table = of_match_ptr(ohci_hcd_nxp_match),
265 },
266 .probe = ohci_hcd_nxp_probe,
267 .remove_new = ohci_hcd_nxp_remove,
268};
269
270static int __init ohci_nxp_init(void)
271{
272 if (usb_disabled())
273 return -ENODEV;
274
275 ohci_init_driver(&ohci_nxp_hc_driver, NULL);
276 return platform_driver_register(&ohci_hcd_nxp_driver);
277}
278module_init(ohci_nxp_init);
279
280static void __exit ohci_nxp_cleanup(void)
281{
282 platform_driver_unregister(&ohci_hcd_nxp_driver);
283}
284module_exit(ohci_nxp_cleanup);
285
286MODULE_DESCRIPTION(DRIVER_DESC);
287MODULE_LICENSE("GPL v2");
1/*
2 * driver for NXP USB Host devices
3 *
4 * Currently supported OHCI host devices:
5 * - Philips PNX4008
6 * - NXP LPC32xx
7 *
8 * Authors: Dmitry Chigirev <source@mvista.com>
9 * Vitaly Wool <vitalywool@gmail.com>
10 *
11 * register initialization is based on code examples provided by Philips
12 * Copyright (c) 2005 Koninklijke Philips Electronics N.V.
13 *
14 * NOTE: This driver does not have suspend/resume functionality
15 * This driver is intended for engineering development purposes only
16 *
17 * 2005-2006 (c) MontaVista Software, Inc. This file is licensed under
18 * the terms of the GNU General Public License version 2. This program
19 * is licensed "as is" without any warranty of any kind, whether express
20 * or implied.
21 */
22#include <linux/clk.h>
23#include <linux/platform_device.h>
24#include <linux/i2c.h>
25#include <linux/of.h>
26#include <linux/usb/isp1301.h>
27
28#include <mach/hardware.h>
29#include <asm/mach-types.h>
30#include <asm/io.h>
31
32#include <mach/platform.h>
33#include <mach/irqs.h>
34
35#define USB_CONFIG_BASE 0x31020000
36#define PWRMAN_BASE 0x40004000
37
38#define USB_CTRL IO_ADDRESS(PWRMAN_BASE + 0x64)
39
40/* USB_CTRL bit defines */
41#define USB_SLAVE_HCLK_EN (1 << 24)
42#define USB_DEV_NEED_CLK_EN (1 << 22)
43#define USB_HOST_NEED_CLK_EN (1 << 21)
44#define PAD_CONTROL_LAST_DRIVEN (1 << 19)
45
46#define USB_OTG_CLK_CTRL IO_ADDRESS(USB_CONFIG_BASE + 0xFF4)
47#define USB_OTG_CLK_STAT IO_ADDRESS(USB_CONFIG_BASE + 0xFF8)
48
49/* USB_OTG_CLK_CTRL bit defines */
50#define AHB_M_CLOCK_ON (1 << 4)
51#define OTG_CLOCK_ON (1 << 3)
52#define I2C_CLOCK_ON (1 << 2)
53#define DEV_CLOCK_ON (1 << 1)
54#define HOST_CLOCK_ON (1 << 0)
55
56#define USB_OTG_STAT_CONTROL IO_ADDRESS(USB_CONFIG_BASE + 0x110)
57
58/* USB_OTG_STAT_CONTROL bit defines */
59#define TRANSPARENT_I2C_EN (1 << 7)
60#define HOST_EN (1 << 0)
61
62/* On LPC32xx, those are undefined */
63#ifndef start_int_set_falling_edge
64#define start_int_set_falling_edge(irq)
65#define start_int_set_rising_edge(irq)
66#define start_int_ack(irq)
67#define start_int_mask(irq)
68#define start_int_umask(irq)
69#endif
70
71static struct i2c_client *isp1301_i2c_client;
72
73extern int usb_disabled(void);
74
75static struct clk *usb_clk;
76
77static void isp1301_configure_pnx4008(void)
78{
79 /* PNX4008 only supports DAT_SE0 USB mode */
80 /* PNX4008 R2A requires setting the MAX603 to output 3.6V */
81 /* Power up externel charge-pump */
82
83 i2c_smbus_write_byte_data(isp1301_i2c_client,
84 ISP1301_I2C_MODE_CONTROL_1, MC1_DAT_SE0 | MC1_SPEED_REG);
85 i2c_smbus_write_byte_data(isp1301_i2c_client,
86 ISP1301_I2C_MODE_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR,
87 ~(MC1_DAT_SE0 | MC1_SPEED_REG));
88 i2c_smbus_write_byte_data(isp1301_i2c_client,
89 ISP1301_I2C_MODE_CONTROL_2,
90 MC2_BI_DI | MC2_PSW_EN | MC2_SPD_SUSP_CTRL);
91 i2c_smbus_write_byte_data(isp1301_i2c_client,
92 ISP1301_I2C_MODE_CONTROL_2 | ISP1301_I2C_REG_CLEAR_ADDR,
93 ~(MC2_BI_DI | MC2_PSW_EN | MC2_SPD_SUSP_CTRL));
94 i2c_smbus_write_byte_data(isp1301_i2c_client,
95 ISP1301_I2C_OTG_CONTROL_1, OTG1_DM_PULLDOWN | OTG1_DP_PULLDOWN);
96 i2c_smbus_write_byte_data(isp1301_i2c_client,
97 ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR,
98 ~(OTG1_DM_PULLDOWN | OTG1_DP_PULLDOWN));
99 i2c_smbus_write_byte_data(isp1301_i2c_client,
100 ISP1301_I2C_INTERRUPT_LATCH | ISP1301_I2C_REG_CLEAR_ADDR, 0xFF);
101 i2c_smbus_write_byte_data(isp1301_i2c_client,
102 ISP1301_I2C_INTERRUPT_FALLING | ISP1301_I2C_REG_CLEAR_ADDR,
103 0xFF);
104 i2c_smbus_write_byte_data(isp1301_i2c_client,
105 ISP1301_I2C_INTERRUPT_RISING | ISP1301_I2C_REG_CLEAR_ADDR,
106 0xFF);
107}
108
109static void isp1301_configure_lpc32xx(void)
110{
111 /* LPC32XX only supports DAT_SE0 USB mode */
112 /* This sequence is important */
113
114 /* Disable transparent UART mode first */
115 i2c_smbus_write_byte_data(isp1301_i2c_client,
116 (ISP1301_I2C_MODE_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR),
117 MC1_UART_EN);
118 i2c_smbus_write_byte_data(isp1301_i2c_client,
119 (ISP1301_I2C_MODE_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR),
120 ~MC1_SPEED_REG);
121 i2c_smbus_write_byte_data(isp1301_i2c_client,
122 ISP1301_I2C_MODE_CONTROL_1, MC1_SPEED_REG);
123 i2c_smbus_write_byte_data(isp1301_i2c_client,
124 (ISP1301_I2C_MODE_CONTROL_2 | ISP1301_I2C_REG_CLEAR_ADDR),
125 ~0);
126 i2c_smbus_write_byte_data(isp1301_i2c_client,
127 ISP1301_I2C_MODE_CONTROL_2,
128 (MC2_BI_DI | MC2_PSW_EN | MC2_SPD_SUSP_CTRL));
129 i2c_smbus_write_byte_data(isp1301_i2c_client,
130 (ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR), ~0);
131 i2c_smbus_write_byte_data(isp1301_i2c_client,
132 ISP1301_I2C_MODE_CONTROL_1, MC1_DAT_SE0);
133 i2c_smbus_write_byte_data(isp1301_i2c_client,
134 ISP1301_I2C_OTG_CONTROL_1,
135 (OTG1_DM_PULLDOWN | OTG1_DP_PULLDOWN));
136 i2c_smbus_write_byte_data(isp1301_i2c_client,
137 (ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR),
138 (OTG1_DM_PULLUP | OTG1_DP_PULLUP));
139 i2c_smbus_write_byte_data(isp1301_i2c_client,
140 ISP1301_I2C_INTERRUPT_LATCH | ISP1301_I2C_REG_CLEAR_ADDR, ~0);
141 i2c_smbus_write_byte_data(isp1301_i2c_client,
142 ISP1301_I2C_INTERRUPT_FALLING | ISP1301_I2C_REG_CLEAR_ADDR,
143 ~0);
144 i2c_smbus_write_byte_data(isp1301_i2c_client,
145 ISP1301_I2C_INTERRUPT_RISING | ISP1301_I2C_REG_CLEAR_ADDR, ~0);
146
147 /* Enable usb_need_clk clock after transceiver is initialized */
148 __raw_writel(__raw_readl(USB_CTRL) | USB_HOST_NEED_CLK_EN, USB_CTRL);
149
150 printk(KERN_INFO "ISP1301 Vendor ID : 0x%04x\n",
151 i2c_smbus_read_word_data(isp1301_i2c_client, 0x00));
152 printk(KERN_INFO "ISP1301 Product ID : 0x%04x\n",
153 i2c_smbus_read_word_data(isp1301_i2c_client, 0x02));
154 printk(KERN_INFO "ISP1301 Version ID : 0x%04x\n",
155 i2c_smbus_read_word_data(isp1301_i2c_client, 0x14));
156}
157
158static void isp1301_configure(void)
159{
160 if (machine_is_pnx4008())
161 isp1301_configure_pnx4008();
162 else
163 isp1301_configure_lpc32xx();
164}
165
166static inline void isp1301_vbus_on(void)
167{
168 i2c_smbus_write_byte_data(isp1301_i2c_client, ISP1301_I2C_OTG_CONTROL_1,
169 OTG1_VBUS_DRV);
170}
171
172static inline void isp1301_vbus_off(void)
173{
174 i2c_smbus_write_byte_data(isp1301_i2c_client,
175 ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR,
176 OTG1_VBUS_DRV);
177}
178
179static void nxp_start_hc(void)
180{
181 unsigned long tmp = __raw_readl(USB_OTG_STAT_CONTROL) | HOST_EN;
182 __raw_writel(tmp, USB_OTG_STAT_CONTROL);
183 isp1301_vbus_on();
184}
185
186static void nxp_stop_hc(void)
187{
188 unsigned long tmp;
189 isp1301_vbus_off();
190 tmp = __raw_readl(USB_OTG_STAT_CONTROL) & ~HOST_EN;
191 __raw_writel(tmp, USB_OTG_STAT_CONTROL);
192}
193
194static int __devinit ohci_nxp_start(struct usb_hcd *hcd)
195{
196 struct ohci_hcd *ohci = hcd_to_ohci(hcd);
197 int ret;
198
199 if ((ret = ohci_init(ohci)) < 0)
200 return ret;
201
202 if ((ret = ohci_run(ohci)) < 0) {
203 dev_err(hcd->self.controller, "can't start\n");
204 ohci_stop(hcd);
205 return ret;
206 }
207 return 0;
208}
209
210static const struct hc_driver ohci_nxp_hc_driver = {
211 .description = hcd_name,
212 .product_desc = "nxp OHCI",
213
214 /*
215 * generic hardware linkage
216 */
217 .irq = ohci_irq,
218 .flags = HCD_USB11 | HCD_MEMORY,
219
220 .hcd_priv_size = sizeof(struct ohci_hcd),
221 /*
222 * basic lifecycle operations
223 */
224 .start = ohci_nxp_start,
225 .stop = ohci_stop,
226 .shutdown = ohci_shutdown,
227
228 /*
229 * managing i/o requests and associated device resources
230 */
231 .urb_enqueue = ohci_urb_enqueue,
232 .urb_dequeue = ohci_urb_dequeue,
233 .endpoint_disable = ohci_endpoint_disable,
234
235 /*
236 * scheduling support
237 */
238 .get_frame_number = ohci_get_frame,
239
240 /*
241 * root hub support
242 */
243 .hub_status_data = ohci_hub_status_data,
244 .hub_control = ohci_hub_control,
245#ifdef CONFIG_PM
246 .bus_suspend = ohci_bus_suspend,
247 .bus_resume = ohci_bus_resume,
248#endif
249 .start_port_reset = ohci_start_port_reset,
250};
251
252#define USB_CLOCK_MASK (AHB_M_CLOCK_ON| OTG_CLOCK_ON | HOST_CLOCK_ON | I2C_CLOCK_ON)
253
254static void nxp_set_usb_bits(void)
255{
256 if (machine_is_pnx4008()) {
257 start_int_set_falling_edge(SE_USB_OTG_ATX_INT_N);
258 start_int_ack(SE_USB_OTG_ATX_INT_N);
259 start_int_umask(SE_USB_OTG_ATX_INT_N);
260
261 start_int_set_rising_edge(SE_USB_OTG_TIMER_INT);
262 start_int_ack(SE_USB_OTG_TIMER_INT);
263 start_int_umask(SE_USB_OTG_TIMER_INT);
264
265 start_int_set_rising_edge(SE_USB_I2C_INT);
266 start_int_ack(SE_USB_I2C_INT);
267 start_int_umask(SE_USB_I2C_INT);
268
269 start_int_set_rising_edge(SE_USB_INT);
270 start_int_ack(SE_USB_INT);
271 start_int_umask(SE_USB_INT);
272
273 start_int_set_rising_edge(SE_USB_NEED_CLK_INT);
274 start_int_ack(SE_USB_NEED_CLK_INT);
275 start_int_umask(SE_USB_NEED_CLK_INT);
276
277 start_int_set_rising_edge(SE_USB_AHB_NEED_CLK_INT);
278 start_int_ack(SE_USB_AHB_NEED_CLK_INT);
279 start_int_umask(SE_USB_AHB_NEED_CLK_INT);
280 }
281}
282
283static void nxp_unset_usb_bits(void)
284{
285 if (machine_is_pnx4008()) {
286 start_int_mask(SE_USB_OTG_ATX_INT_N);
287 start_int_mask(SE_USB_OTG_TIMER_INT);
288 start_int_mask(SE_USB_I2C_INT);
289 start_int_mask(SE_USB_INT);
290 start_int_mask(SE_USB_NEED_CLK_INT);
291 start_int_mask(SE_USB_AHB_NEED_CLK_INT);
292 }
293}
294
295static int __devinit usb_hcd_nxp_probe(struct platform_device *pdev)
296{
297 struct usb_hcd *hcd = 0;
298 struct ohci_hcd *ohci;
299 const struct hc_driver *driver = &ohci_nxp_hc_driver;
300 struct resource *res;
301 int ret = 0, irq;
302 struct device_node *isp1301_node;
303
304 if (pdev->dev.of_node) {
305 isp1301_node = of_parse_phandle(pdev->dev.of_node,
306 "transceiver", 0);
307 } else {
308 isp1301_node = NULL;
309 }
310
311 isp1301_i2c_client = isp1301_get_client(isp1301_node);
312 if (!isp1301_i2c_client) {
313 ret = -EPROBE_DEFER;
314 goto out;
315 }
316
317 pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
318 pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
319
320 dev_dbg(&pdev->dev, "%s: " DRIVER_DESC " (nxp)\n", hcd_name);
321 if (usb_disabled()) {
322 dev_err(&pdev->dev, "USB is disabled\n");
323 ret = -ENODEV;
324 goto out;
325 }
326
327 /* Enable AHB slave USB clock, needed for further USB clock control */
328 __raw_writel(USB_SLAVE_HCLK_EN | PAD_CONTROL_LAST_DRIVEN, USB_CTRL);
329
330 isp1301_configure();
331
332 /* Enable USB PLL */
333 usb_clk = clk_get(&pdev->dev, "ck_pll5");
334 if (IS_ERR(usb_clk)) {
335 dev_err(&pdev->dev, "failed to acquire USB PLL\n");
336 ret = PTR_ERR(usb_clk);
337 goto out1;
338 }
339
340 ret = clk_enable(usb_clk);
341 if (ret < 0) {
342 dev_err(&pdev->dev, "failed to start USB PLL\n");
343 goto out2;
344 }
345
346 ret = clk_set_rate(usb_clk, 48000);
347 if (ret < 0) {
348 dev_err(&pdev->dev, "failed to set USB clock rate\n");
349 goto out3;
350 }
351
352 __raw_writel(__raw_readl(USB_CTRL) | USB_HOST_NEED_CLK_EN, USB_CTRL);
353
354 /* Set to enable all needed USB clocks */
355 __raw_writel(USB_CLOCK_MASK, USB_OTG_CLK_CTRL);
356
357 while ((__raw_readl(USB_OTG_CLK_STAT) & USB_CLOCK_MASK) !=
358 USB_CLOCK_MASK) ;
359
360 hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
361 if (!hcd) {
362 dev_err(&pdev->dev, "Failed to allocate HC buffer\n");
363 ret = -ENOMEM;
364 goto out3;
365 }
366
367 /* Set all USB bits in the Start Enable register */
368 nxp_set_usb_bits();
369
370 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
371 if (!res) {
372 dev_err(&pdev->dev, "Failed to get MEM resource\n");
373 ret = -ENOMEM;
374 goto out4;
375 }
376
377 hcd->regs = devm_request_and_ioremap(&pdev->dev, res);
378 if (!hcd->regs) {
379 dev_err(&pdev->dev, "Failed to devm_request_and_ioremap\n");
380 ret = -ENOMEM;
381 goto out4;
382 }
383 hcd->rsrc_start = res->start;
384 hcd->rsrc_len = resource_size(res);
385
386 irq = platform_get_irq(pdev, 0);
387 if (irq < 0) {
388 ret = -ENXIO;
389 goto out4;
390 }
391
392 nxp_start_hc();
393 platform_set_drvdata(pdev, hcd);
394 ohci = hcd_to_ohci(hcd);
395 ohci_hcd_init(ohci);
396
397 dev_info(&pdev->dev, "at 0x%p, irq %d\n", hcd->regs, hcd->irq);
398 ret = usb_add_hcd(hcd, irq, 0);
399 if (ret == 0)
400 return ret;
401
402 nxp_stop_hc();
403out4:
404 nxp_unset_usb_bits();
405 usb_put_hcd(hcd);
406out3:
407 clk_disable(usb_clk);
408out2:
409 clk_put(usb_clk);
410out1:
411 isp1301_i2c_client = NULL;
412out:
413 return ret;
414}
415
416static int usb_hcd_nxp_remove(struct platform_device *pdev)
417{
418 struct usb_hcd *hcd = platform_get_drvdata(pdev);
419
420 usb_remove_hcd(hcd);
421 nxp_stop_hc();
422 release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
423 usb_put_hcd(hcd);
424 nxp_unset_usb_bits();
425 clk_disable(usb_clk);
426 clk_put(usb_clk);
427 i2c_unregister_device(isp1301_i2c_client);
428 isp1301_i2c_client = NULL;
429
430 platform_set_drvdata(pdev, NULL);
431
432 return 0;
433}
434
435/* work with hotplug and coldplug */
436MODULE_ALIAS("platform:usb-ohci");
437
438#ifdef CONFIG_OF
439static const struct of_device_id usb_hcd_nxp_match[] = {
440 { .compatible = "nxp,ohci-nxp" },
441 {},
442};
443MODULE_DEVICE_TABLE(of, usb_hcd_nxp_match);
444#endif
445
446static struct platform_driver usb_hcd_nxp_driver = {
447 .driver = {
448 .name = "usb-ohci",
449 .owner = THIS_MODULE,
450 .of_match_table = of_match_ptr(usb_hcd_nxp_match),
451 },
452 .probe = usb_hcd_nxp_probe,
453 .remove = usb_hcd_nxp_remove,
454};
455