1/******************************************************************************
  2 *
  3 * Copyright(c) 2009-2012  Realtek Corporation. All rights reserved.
  4 *
  5 * This program is free software; you can redistribute it and/or modify it
  6 * under the terms of version 2 of the GNU General Public License as
  7 * published by the Free Software Foundation.
  8 *
  9 * This program is distributed in the hope that it will be useful, but WITHOUT
 10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 11 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
 12 * more details.
 13 *
 14 * You should have received a copy of the GNU General Public License along with
 15 * this program; if not, write to the Free Software Foundation, Inc.,
 16 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
 17 *
 18 * The full GNU General Public License is included in this distribution in the
 19 * file called LICENSE.
 20 *
 21 * Contact Information:
 22 * wlanfae <wlanfae@realtek.com>
 23 * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
 24 * Hsinchu 300, Taiwan.
 25 *
 26 *****************************************************************************/
 27
 28#ifndef __RTL_USB_H__
 29#define __RTL_USB_H__
 30
 31#include <linux/skbuff.h>
 32
 33#define RTL_RX_DESC_SIZE		24
 34
 35#define RTL_USB_DEVICE(vend, prod, cfg) \
 36	.match_flags = USB_DEVICE_ID_MATCH_DEVICE, \
 37	.idVendor = (vend), \
 38	.idProduct = (prod), \
 39	.driver_info = (kernel_ulong_t)&(cfg)
 40
 41#define USB_HIGH_SPEED_BULK_SIZE	512
 42#define USB_FULL_SPEED_BULK_SIZE	64
 43
 44
 45#define RTL_USB_MAX_TXQ_NUM		4		/* max tx queue */
 46#define RTL_USB_MAX_EP_NUM		6		/* max ep number */
 47#define RTL_USB_MAX_TX_URBS_NUM		8
 48
 49enum rtl_txq {
 50	/* These definitions shall be consistent with value
 51	 * returned by skb_get_queue_mapping
 52	 *------------------------------------*/
 53	RTL_TXQ_BK,
 54	RTL_TXQ_BE,
 55	RTL_TXQ_VI,
 56	RTL_TXQ_VO,
 57	/*------------------------------------*/
 58	RTL_TXQ_BCN,
 59	RTL_TXQ_MGT,
 60	RTL_TXQ_HI,
 61
 62	/* Must be last */
 63	__RTL_TXQ_NUM,
 64};
 65
 66struct rtl_ep_map {
 67	u32 ep_mapping[__RTL_TXQ_NUM];
 68};
 69
 70struct _trx_info {
 71	struct rtl_usb *rtlusb;
 72	u32 ep_num;
 73};
 74
 75static inline void _rtl_install_trx_info(struct rtl_usb *rtlusb,
 76					 struct sk_buff *skb,
 77					 u32 ep_num)
 78{
 79	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
 80	info->rate_driver_data[0] = rtlusb;
 81	info->rate_driver_data[1] = (void *)(__kernel_size_t)ep_num;
 82}
 83
 84
 85/*  Add suspend/resume later */
 86enum rtl_usb_state {
 87	USB_STATE_STOP	= 0,
 88	USB_STATE_START	= 1,
 89};
 90
 91#define IS_USB_STOP(rtlusb_ptr) (USB_STATE_STOP == (rtlusb_ptr)->state)
 92#define IS_USB_START(rtlusb_ptr) (USB_STATE_START == (rtlusb_ptr)->state)
 93#define SET_USB_STOP(rtlusb_ptr) \
 94	do {							\
 95		(rtlusb_ptr)->state = USB_STATE_STOP;		\
 96	} while (0)
 97
 98#define SET_USB_START(rtlusb_ptr)				\
 99	do { \
100		(rtlusb_ptr)->state = USB_STATE_START;		\
101	} while (0)
102
103struct rtl_usb {
104	struct usb_device *udev;
105	struct usb_interface *intf;
106	enum rtl_usb_state state;
107
108	/* Bcn control register setting */
109	u32 reg_bcn_ctrl_val;
110	/* for 88/92cu card disable */
111	u8	disableHWSM;
112	/*QOS & EDCA */
113	enum acm_method acm_method;
114	/* irq  . HIMR,HIMR_EX */
115	u32 irq_mask[2];
116	bool irq_enabled;
117
118	u16 (*usb_mq_to_hwq)(__le16 fc, u16 mac80211_queue_index);
119
120	/* Tx */
121	u8 out_ep_nums ;
122	u8 out_queue_sel;
123	struct rtl_ep_map ep_map;
124
125	u32 max_bulk_out_size;
126	u32 tx_submitted_urbs;
127	struct sk_buff_head tx_skb_queue[RTL_USB_MAX_EP_NUM];
128
129	struct usb_anchor tx_pending[RTL_USB_MAX_EP_NUM];
130	struct usb_anchor tx_submitted;
131
132	struct sk_buff *(*usb_tx_aggregate_hdl)(struct ieee80211_hw *,
133						struct sk_buff_head *);
134	int (*usb_tx_post_hdl)(struct ieee80211_hw *,
135			       struct urb *, struct sk_buff *);
136	void (*usb_tx_cleanup)(struct ieee80211_hw *, struct sk_buff *);
137
138	/* Rx */
139	u8 in_ep_nums ;
140	u32 in_ep;		/* Bulk IN endpoint number */
141	u32 rx_max_size;	/* Bulk IN max buffer size */
142	u32 rx_urb_num;		/* How many Bulk INs are submitted to host. */
143	struct usb_anchor	rx_submitted;
144	void (*usb_rx_segregate_hdl)(struct ieee80211_hw *, struct sk_buff *,
145				     struct sk_buff_head *);
146	void (*usb_rx_hdl)(struct ieee80211_hw *, struct sk_buff *);
147};
148
149struct rtl_usb_priv {
150	struct rtl_usb dev;
151	struct rtl_led_ctl ledctl;
152};
153
154#define rtl_usbpriv(hw)	 (((struct rtl_usb_priv *)(rtl_priv(hw))->priv))
155#define rtl_usbdev(usbpriv)	(&((usbpriv)->dev))
156
157
158
159int __devinit rtl_usb_probe(struct usb_interface *intf,
160			    const struct usb_device_id *id);
161void rtl_usb_disconnect(struct usb_interface *intf);
162int rtl_usb_suspend(struct usb_interface *pusb_intf, pm_message_t message);
163int rtl_usb_resume(struct usb_interface *pusb_intf);
164
165#endif