Linux Audio

Check our new training course

Loading...
Note: File does not exist in v6.8.
 1#ifndef B43_PHY_HT_H_
 2#define B43_PHY_HT_H_
 3
 4#include "phy_common.h"
 5
 6
 7#define B43_PHY_HT_BBCFG			0x001 /* BB config */
 8#define  B43_PHY_HT_BBCFG_RSTCCA		0x4000 /* Reset CCA */
 9#define  B43_PHY_HT_BBCFG_RSTRX			0x8000 /* Reset RX */
10#define B43_PHY_HT_BANDCTL			0x009 /* Band control */
11#define  B43_PHY_HT_BANDCTL_5GHZ		0x0001 /* Use the 5GHz band */
12#define B43_PHY_HT_TABLE_ADDR			0x072 /* Table address */
13#define B43_PHY_HT_TABLE_DATALO			0x073 /* Table data low */
14#define B43_PHY_HT_TABLE_DATAHI			0x074 /* Table data high */
15#define B43_PHY_HT_BW1				0x1CE
16#define B43_PHY_HT_BW2				0x1CF
17#define B43_PHY_HT_BW3				0x1D0
18#define B43_PHY_HT_BW4				0x1D1
19#define B43_PHY_HT_BW5				0x1D2
20#define B43_PHY_HT_BW6				0x1D3
21
22#define B43_PHY_HT_C1_CLIP1THRES		B43_PHY_OFDM(0x00E)
23#define B43_PHY_HT_C2_CLIP1THRES		B43_PHY_OFDM(0x04E)
24#define B43_PHY_HT_C3_CLIP1THRES		B43_PHY_OFDM(0x08E)
25
26#define B43_PHY_HT_RF_SEQ_MODE			B43_PHY_EXTG(0x000)
27#define B43_PHY_HT_RF_SEQ_TRIG			B43_PHY_EXTG(0x003)
28#define  B43_PHY_HT_RF_SEQ_TRIG_RX2TX		0x0001 /* RX2TX */
29#define  B43_PHY_HT_RF_SEQ_TRIG_TX2RX		0x0002 /* TX2RX */
30#define  B43_PHY_HT_RF_SEQ_TRIG_UPGH		0x0004 /* Update gain H */
31#define  B43_PHY_HT_RF_SEQ_TRIG_UPGL		0x0008 /* Update gain L */
32#define  B43_PHY_HT_RF_SEQ_TRIG_UPGU		0x0010 /* Update gain U */
33#define  B43_PHY_HT_RF_SEQ_TRIG_RST2RX		0x0020 /* Reset to RX */
34#define B43_PHY_HT_RF_SEQ_STATUS		B43_PHY_EXTG(0x004)
35/* Values for the status are the same as for the trigger */
36
37#define B43_PHY_HT_RF_CTL1			B43_PHY_EXTG(0x010)
38
39#define B43_PHY_HT_AFE_CTL1			B43_PHY_EXTG(0x110)
40#define B43_PHY_HT_AFE_CTL2			B43_PHY_EXTG(0x111)
41#define B43_PHY_HT_AFE_CTL3			B43_PHY_EXTG(0x114)
42#define B43_PHY_HT_AFE_CTL4			B43_PHY_EXTG(0x115)
43#define B43_PHY_HT_AFE_CTL5			B43_PHY_EXTG(0x118)
44#define B43_PHY_HT_AFE_CTL6			B43_PHY_EXTG(0x119)
45
46
47/* Values for PHY registers used on channel switching */
48struct b43_phy_ht_channeltab_e_phy {
49	u16 bw1;
50	u16 bw2;
51	u16 bw3;
52	u16 bw4;
53	u16 bw5;
54	u16 bw6;
55};
56
57
58struct b43_phy_ht {
59};
60
61
62struct b43_phy_operations;
63extern const struct b43_phy_operations b43_phyops_ht;
64
65#endif /* B43_PHY_HT_H_ */