Loading...
1// SPDX-License-Identifier: GPL-2.0
2/* Copyright(c) 2007 - 2018 Intel Corporation. */
3
4#include <linux/bitfield.h>
5#include <linux/delay.h>
6#include <linux/if_ether.h>
7#include "e1000_mac.h"
8#include "e1000_nvm.h"
9
10/**
11 * igb_raise_eec_clk - Raise EEPROM clock
12 * @hw: pointer to the HW structure
13 * @eecd: pointer to the EEPROM
14 *
15 * Enable/Raise the EEPROM clock bit.
16 **/
17static void igb_raise_eec_clk(struct e1000_hw *hw, u32 *eecd)
18{
19 *eecd = *eecd | E1000_EECD_SK;
20 wr32(E1000_EECD, *eecd);
21 wrfl();
22 udelay(hw->nvm.delay_usec);
23}
24
25/**
26 * igb_lower_eec_clk - Lower EEPROM clock
27 * @hw: pointer to the HW structure
28 * @eecd: pointer to the EEPROM
29 *
30 * Clear/Lower the EEPROM clock bit.
31 **/
32static void igb_lower_eec_clk(struct e1000_hw *hw, u32 *eecd)
33{
34 *eecd = *eecd & ~E1000_EECD_SK;
35 wr32(E1000_EECD, *eecd);
36 wrfl();
37 udelay(hw->nvm.delay_usec);
38}
39
40/**
41 * igb_shift_out_eec_bits - Shift data bits our to the EEPROM
42 * @hw: pointer to the HW structure
43 * @data: data to send to the EEPROM
44 * @count: number of bits to shift out
45 *
46 * We need to shift 'count' bits out to the EEPROM. So, the value in the
47 * "data" parameter will be shifted out to the EEPROM one bit at a time.
48 * In order to do this, "data" must be broken down into bits.
49 **/
50static void igb_shift_out_eec_bits(struct e1000_hw *hw, u16 data, u16 count)
51{
52 struct e1000_nvm_info *nvm = &hw->nvm;
53 u32 eecd = rd32(E1000_EECD);
54 u32 mask;
55
56 mask = 1u << (count - 1);
57 if (nvm->type == e1000_nvm_eeprom_spi)
58 eecd |= E1000_EECD_DO;
59
60 do {
61 eecd &= ~E1000_EECD_DI;
62
63 if (data & mask)
64 eecd |= E1000_EECD_DI;
65
66 wr32(E1000_EECD, eecd);
67 wrfl();
68
69 udelay(nvm->delay_usec);
70
71 igb_raise_eec_clk(hw, &eecd);
72 igb_lower_eec_clk(hw, &eecd);
73
74 mask >>= 1;
75 } while (mask);
76
77 eecd &= ~E1000_EECD_DI;
78 wr32(E1000_EECD, eecd);
79}
80
81/**
82 * igb_shift_in_eec_bits - Shift data bits in from the EEPROM
83 * @hw: pointer to the HW structure
84 * @count: number of bits to shift in
85 *
86 * In order to read a register from the EEPROM, we need to shift 'count' bits
87 * in from the EEPROM. Bits are "shifted in" by raising the clock input to
88 * the EEPROM (setting the SK bit), and then reading the value of the data out
89 * "DO" bit. During this "shifting in" process the data in "DI" bit should
90 * always be clear.
91 **/
92static u16 igb_shift_in_eec_bits(struct e1000_hw *hw, u16 count)
93{
94 u32 eecd;
95 u32 i;
96 u16 data;
97
98 eecd = rd32(E1000_EECD);
99
100 eecd &= ~(E1000_EECD_DO | E1000_EECD_DI);
101 data = 0;
102
103 for (i = 0; i < count; i++) {
104 data <<= 1;
105 igb_raise_eec_clk(hw, &eecd);
106
107 eecd = rd32(E1000_EECD);
108
109 eecd &= ~E1000_EECD_DI;
110 if (eecd & E1000_EECD_DO)
111 data |= 1;
112
113 igb_lower_eec_clk(hw, &eecd);
114 }
115
116 return data;
117}
118
119/**
120 * igb_poll_eerd_eewr_done - Poll for EEPROM read/write completion
121 * @hw: pointer to the HW structure
122 * @ee_reg: EEPROM flag for polling
123 *
124 * Polls the EEPROM status bit for either read or write completion based
125 * upon the value of 'ee_reg'.
126 **/
127static s32 igb_poll_eerd_eewr_done(struct e1000_hw *hw, int ee_reg)
128{
129 u32 attempts = 100000;
130 u32 i, reg = 0;
131 s32 ret_val = -E1000_ERR_NVM;
132
133 for (i = 0; i < attempts; i++) {
134 if (ee_reg == E1000_NVM_POLL_READ)
135 reg = rd32(E1000_EERD);
136 else
137 reg = rd32(E1000_EEWR);
138
139 if (reg & E1000_NVM_RW_REG_DONE) {
140 ret_val = 0;
141 break;
142 }
143
144 udelay(5);
145 }
146
147 return ret_val;
148}
149
150/**
151 * igb_acquire_nvm - Generic request for access to EEPROM
152 * @hw: pointer to the HW structure
153 *
154 * Set the EEPROM access request bit and wait for EEPROM access grant bit.
155 * Return successful if access grant bit set, else clear the request for
156 * EEPROM access and return -E1000_ERR_NVM (-1).
157 **/
158s32 igb_acquire_nvm(struct e1000_hw *hw)
159{
160 u32 eecd = rd32(E1000_EECD);
161 s32 timeout = E1000_NVM_GRANT_ATTEMPTS;
162 s32 ret_val = 0;
163
164
165 wr32(E1000_EECD, eecd | E1000_EECD_REQ);
166 eecd = rd32(E1000_EECD);
167
168 while (timeout) {
169 if (eecd & E1000_EECD_GNT)
170 break;
171 udelay(5);
172 eecd = rd32(E1000_EECD);
173 timeout--;
174 }
175
176 if (!timeout) {
177 eecd &= ~E1000_EECD_REQ;
178 wr32(E1000_EECD, eecd);
179 hw_dbg("Could not acquire NVM grant\n");
180 ret_val = -E1000_ERR_NVM;
181 }
182
183 return ret_val;
184}
185
186/**
187 * igb_standby_nvm - Return EEPROM to standby state
188 * @hw: pointer to the HW structure
189 *
190 * Return the EEPROM to a standby state.
191 **/
192static void igb_standby_nvm(struct e1000_hw *hw)
193{
194 struct e1000_nvm_info *nvm = &hw->nvm;
195 u32 eecd = rd32(E1000_EECD);
196
197 if (nvm->type == e1000_nvm_eeprom_spi) {
198 /* Toggle CS to flush commands */
199 eecd |= E1000_EECD_CS;
200 wr32(E1000_EECD, eecd);
201 wrfl();
202 udelay(nvm->delay_usec);
203 eecd &= ~E1000_EECD_CS;
204 wr32(E1000_EECD, eecd);
205 wrfl();
206 udelay(nvm->delay_usec);
207 }
208}
209
210/**
211 * e1000_stop_nvm - Terminate EEPROM command
212 * @hw: pointer to the HW structure
213 *
214 * Terminates the current command by inverting the EEPROM's chip select pin.
215 **/
216static void e1000_stop_nvm(struct e1000_hw *hw)
217{
218 u32 eecd;
219
220 eecd = rd32(E1000_EECD);
221 if (hw->nvm.type == e1000_nvm_eeprom_spi) {
222 /* Pull CS high */
223 eecd |= E1000_EECD_CS;
224 igb_lower_eec_clk(hw, &eecd);
225 }
226}
227
228/**
229 * igb_release_nvm - Release exclusive access to EEPROM
230 * @hw: pointer to the HW structure
231 *
232 * Stop any current commands to the EEPROM and clear the EEPROM request bit.
233 **/
234void igb_release_nvm(struct e1000_hw *hw)
235{
236 u32 eecd;
237
238 e1000_stop_nvm(hw);
239
240 eecd = rd32(E1000_EECD);
241 eecd &= ~E1000_EECD_REQ;
242 wr32(E1000_EECD, eecd);
243}
244
245/**
246 * igb_ready_nvm_eeprom - Prepares EEPROM for read/write
247 * @hw: pointer to the HW structure
248 *
249 * Setups the EEPROM for reading and writing.
250 **/
251static s32 igb_ready_nvm_eeprom(struct e1000_hw *hw)
252{
253 struct e1000_nvm_info *nvm = &hw->nvm;
254 u32 eecd = rd32(E1000_EECD);
255 s32 ret_val = 0;
256 u16 timeout = 0;
257 u8 spi_stat_reg;
258
259
260 if (nvm->type == e1000_nvm_eeprom_spi) {
261 /* Clear SK and CS */
262 eecd &= ~(E1000_EECD_CS | E1000_EECD_SK);
263 wr32(E1000_EECD, eecd);
264 wrfl();
265 udelay(1);
266 timeout = NVM_MAX_RETRY_SPI;
267
268 /* Read "Status Register" repeatedly until the LSB is cleared.
269 * The EEPROM will signal that the command has been completed
270 * by clearing bit 0 of the internal status register. If it's
271 * not cleared within 'timeout', then error out.
272 */
273 while (timeout) {
274 igb_shift_out_eec_bits(hw, NVM_RDSR_OPCODE_SPI,
275 hw->nvm.opcode_bits);
276 spi_stat_reg = (u8)igb_shift_in_eec_bits(hw, 8);
277 if (!(spi_stat_reg & NVM_STATUS_RDY_SPI))
278 break;
279
280 udelay(5);
281 igb_standby_nvm(hw);
282 timeout--;
283 }
284
285 if (!timeout) {
286 hw_dbg("SPI NVM Status error\n");
287 ret_val = -E1000_ERR_NVM;
288 goto out;
289 }
290 }
291
292out:
293 return ret_val;
294}
295
296/**
297 * igb_read_nvm_spi - Read EEPROM's using SPI
298 * @hw: pointer to the HW structure
299 * @offset: offset of word in the EEPROM to read
300 * @words: number of words to read
301 * @data: word read from the EEPROM
302 *
303 * Reads a 16 bit word from the EEPROM.
304 **/
305s32 igb_read_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
306{
307 struct e1000_nvm_info *nvm = &hw->nvm;
308 u32 i = 0;
309 s32 ret_val;
310 u16 word_in;
311 u8 read_opcode = NVM_READ_OPCODE_SPI;
312
313 /* A check for invalid values: offset too large, too many words,
314 * and not enough words.
315 */
316 if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
317 (words == 0)) {
318 hw_dbg("nvm parameter(s) out of bounds\n");
319 ret_val = -E1000_ERR_NVM;
320 goto out;
321 }
322
323 ret_val = nvm->ops.acquire(hw);
324 if (ret_val)
325 goto out;
326
327 ret_val = igb_ready_nvm_eeprom(hw);
328 if (ret_val)
329 goto release;
330
331 igb_standby_nvm(hw);
332
333 if ((nvm->address_bits == 8) && (offset >= 128))
334 read_opcode |= NVM_A8_OPCODE_SPI;
335
336 /* Send the READ command (opcode + addr) */
337 igb_shift_out_eec_bits(hw, read_opcode, nvm->opcode_bits);
338 igb_shift_out_eec_bits(hw, (u16)(offset*2), nvm->address_bits);
339
340 /* Read the data. SPI NVMs increment the address with each byte
341 * read and will roll over if reading beyond the end. This allows
342 * us to read the whole NVM from any offset
343 */
344 for (i = 0; i < words; i++) {
345 word_in = igb_shift_in_eec_bits(hw, 16);
346 data[i] = (word_in >> 8) | (word_in << 8);
347 }
348
349release:
350 nvm->ops.release(hw);
351
352out:
353 return ret_val;
354}
355
356/**
357 * igb_read_nvm_eerd - Reads EEPROM using EERD register
358 * @hw: pointer to the HW structure
359 * @offset: offset of word in the EEPROM to read
360 * @words: number of words to read
361 * @data: word read from the EEPROM
362 *
363 * Reads a 16 bit word from the EEPROM using the EERD register.
364 **/
365s32 igb_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
366{
367 struct e1000_nvm_info *nvm = &hw->nvm;
368 u32 i, eerd = 0;
369 s32 ret_val = 0;
370
371 /* A check for invalid values: offset too large, too many words,
372 * and not enough words.
373 */
374 if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
375 (words == 0)) {
376 hw_dbg("nvm parameter(s) out of bounds\n");
377 ret_val = -E1000_ERR_NVM;
378 goto out;
379 }
380
381 for (i = 0; i < words; i++) {
382 eerd = ((offset+i) << E1000_NVM_RW_ADDR_SHIFT) +
383 E1000_NVM_RW_REG_START;
384
385 wr32(E1000_EERD, eerd);
386 ret_val = igb_poll_eerd_eewr_done(hw, E1000_NVM_POLL_READ);
387 if (ret_val)
388 break;
389
390 data[i] = (rd32(E1000_EERD) >>
391 E1000_NVM_RW_REG_DATA);
392 }
393
394out:
395 return ret_val;
396}
397
398/**
399 * igb_write_nvm_spi - Write to EEPROM using SPI
400 * @hw: pointer to the HW structure
401 * @offset: offset within the EEPROM to be written to
402 * @words: number of words to write
403 * @data: 16 bit word(s) to be written to the EEPROM
404 *
405 * Writes data to EEPROM at offset using SPI interface.
406 *
407 * If e1000_update_nvm_checksum is not called after this function , the
408 * EEPROM will most likley contain an invalid checksum.
409 **/
410s32 igb_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
411{
412 struct e1000_nvm_info *nvm = &hw->nvm;
413 s32 ret_val = -E1000_ERR_NVM;
414 u16 widx = 0;
415
416 /* A check for invalid values: offset too large, too many words,
417 * and not enough words.
418 */
419 if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
420 (words == 0)) {
421 hw_dbg("nvm parameter(s) out of bounds\n");
422 return ret_val;
423 }
424
425 while (widx < words) {
426 u8 write_opcode = NVM_WRITE_OPCODE_SPI;
427
428 ret_val = nvm->ops.acquire(hw);
429 if (ret_val)
430 return ret_val;
431
432 ret_val = igb_ready_nvm_eeprom(hw);
433 if (ret_val) {
434 nvm->ops.release(hw);
435 return ret_val;
436 }
437
438 igb_standby_nvm(hw);
439
440 /* Send the WRITE ENABLE command (8 bit opcode) */
441 igb_shift_out_eec_bits(hw, NVM_WREN_OPCODE_SPI,
442 nvm->opcode_bits);
443
444 igb_standby_nvm(hw);
445
446 /* Some SPI eeproms use the 8th address bit embedded in the
447 * opcode
448 */
449 if ((nvm->address_bits == 8) && (offset >= 128))
450 write_opcode |= NVM_A8_OPCODE_SPI;
451
452 /* Send the Write command (8-bit opcode + addr) */
453 igb_shift_out_eec_bits(hw, write_opcode, nvm->opcode_bits);
454 igb_shift_out_eec_bits(hw, (u16)((offset + widx) * 2),
455 nvm->address_bits);
456
457 /* Loop to allow for up to whole page write of eeprom */
458 while (widx < words) {
459 u16 word_out = data[widx];
460
461 word_out = (word_out >> 8) | (word_out << 8);
462 igb_shift_out_eec_bits(hw, word_out, 16);
463 widx++;
464
465 if ((((offset + widx) * 2) % nvm->page_size) == 0) {
466 igb_standby_nvm(hw);
467 break;
468 }
469 }
470 usleep_range(1000, 2000);
471 nvm->ops.release(hw);
472 }
473
474 return ret_val;
475}
476
477/**
478 * igb_read_part_string - Read device part number
479 * @hw: pointer to the HW structure
480 * @part_num: pointer to device part number
481 * @part_num_size: size of part number buffer
482 *
483 * Reads the product board assembly (PBA) number from the EEPROM and stores
484 * the value in part_num.
485 **/
486s32 igb_read_part_string(struct e1000_hw *hw, u8 *part_num, u32 part_num_size)
487{
488 s32 ret_val;
489 u16 nvm_data;
490 u16 pointer;
491 u16 offset;
492 u16 length;
493
494 if (part_num == NULL) {
495 hw_dbg("PBA string buffer was null\n");
496 ret_val = E1000_ERR_INVALID_ARGUMENT;
497 goto out;
498 }
499
500 ret_val = hw->nvm.ops.read(hw, NVM_PBA_OFFSET_0, 1, &nvm_data);
501 if (ret_val) {
502 hw_dbg("NVM Read Error\n");
503 goto out;
504 }
505
506 ret_val = hw->nvm.ops.read(hw, NVM_PBA_OFFSET_1, 1, &pointer);
507 if (ret_val) {
508 hw_dbg("NVM Read Error\n");
509 goto out;
510 }
511
512 /* if nvm_data is not ptr guard the PBA must be in legacy format which
513 * means pointer is actually our second data word for the PBA number
514 * and we can decode it into an ascii string
515 */
516 if (nvm_data != NVM_PBA_PTR_GUARD) {
517 hw_dbg("NVM PBA number is not stored as string\n");
518
519 /* we will need 11 characters to store the PBA */
520 if (part_num_size < 11) {
521 hw_dbg("PBA string buffer too small\n");
522 return E1000_ERR_NO_SPACE;
523 }
524
525 /* extract hex string from data and pointer */
526 part_num[0] = (nvm_data >> 12) & 0xF;
527 part_num[1] = (nvm_data >> 8) & 0xF;
528 part_num[2] = (nvm_data >> 4) & 0xF;
529 part_num[3] = nvm_data & 0xF;
530 part_num[4] = (pointer >> 12) & 0xF;
531 part_num[5] = (pointer >> 8) & 0xF;
532 part_num[6] = '-';
533 part_num[7] = 0;
534 part_num[8] = (pointer >> 4) & 0xF;
535 part_num[9] = pointer & 0xF;
536
537 /* put a null character on the end of our string */
538 part_num[10] = '\0';
539
540 /* switch all the data but the '-' to hex char */
541 for (offset = 0; offset < 10; offset++) {
542 if (part_num[offset] < 0xA)
543 part_num[offset] += '0';
544 else if (part_num[offset] < 0x10)
545 part_num[offset] += 'A' - 0xA;
546 }
547
548 goto out;
549 }
550
551 ret_val = hw->nvm.ops.read(hw, pointer, 1, &length);
552 if (ret_val) {
553 hw_dbg("NVM Read Error\n");
554 goto out;
555 }
556
557 if (length == 0xFFFF || length == 0) {
558 hw_dbg("NVM PBA number section invalid length\n");
559 ret_val = E1000_ERR_NVM_PBA_SECTION;
560 goto out;
561 }
562 /* check if part_num buffer is big enough */
563 if (part_num_size < (((u32)length * 2) - 1)) {
564 hw_dbg("PBA string buffer too small\n");
565 ret_val = E1000_ERR_NO_SPACE;
566 goto out;
567 }
568
569 /* trim pba length from start of string */
570 pointer++;
571 length--;
572
573 for (offset = 0; offset < length; offset++) {
574 ret_val = hw->nvm.ops.read(hw, pointer + offset, 1, &nvm_data);
575 if (ret_val) {
576 hw_dbg("NVM Read Error\n");
577 goto out;
578 }
579 part_num[offset * 2] = (u8)(nvm_data >> 8);
580 part_num[(offset * 2) + 1] = (u8)(nvm_data & 0xFF);
581 }
582 part_num[offset * 2] = '\0';
583
584out:
585 return ret_val;
586}
587
588/**
589 * igb_read_mac_addr - Read device MAC address
590 * @hw: pointer to the HW structure
591 *
592 * Reads the device MAC address from the EEPROM and stores the value.
593 * Since devices with two ports use the same EEPROM, we increment the
594 * last bit in the MAC address for the second port.
595 **/
596s32 igb_read_mac_addr(struct e1000_hw *hw)
597{
598 u32 rar_high;
599 u32 rar_low;
600 u16 i;
601
602 rar_high = rd32(E1000_RAH(0));
603 rar_low = rd32(E1000_RAL(0));
604
605 for (i = 0; i < E1000_RAL_MAC_ADDR_LEN; i++)
606 hw->mac.perm_addr[i] = (u8)(rar_low >> (i*8));
607
608 for (i = 0; i < E1000_RAH_MAC_ADDR_LEN; i++)
609 hw->mac.perm_addr[i+4] = (u8)(rar_high >> (i*8));
610
611 for (i = 0; i < ETH_ALEN; i++)
612 hw->mac.addr[i] = hw->mac.perm_addr[i];
613
614 return 0;
615}
616
617/**
618 * igb_validate_nvm_checksum - Validate EEPROM checksum
619 * @hw: pointer to the HW structure
620 *
621 * Calculates the EEPROM checksum by reading/adding each word of the EEPROM
622 * and then verifies that the sum of the EEPROM is equal to 0xBABA.
623 **/
624s32 igb_validate_nvm_checksum(struct e1000_hw *hw)
625{
626 s32 ret_val = 0;
627 u16 checksum = 0;
628 u16 i, nvm_data;
629
630 for (i = 0; i < (NVM_CHECKSUM_REG + 1); i++) {
631 ret_val = hw->nvm.ops.read(hw, i, 1, &nvm_data);
632 if (ret_val) {
633 hw_dbg("NVM Read Error\n");
634 goto out;
635 }
636 checksum += nvm_data;
637 }
638
639 if (checksum != (u16) NVM_SUM) {
640 hw_dbg("NVM Checksum Invalid\n");
641 ret_val = -E1000_ERR_NVM;
642 goto out;
643 }
644
645out:
646 return ret_val;
647}
648
649/**
650 * igb_update_nvm_checksum - Update EEPROM checksum
651 * @hw: pointer to the HW structure
652 *
653 * Updates the EEPROM checksum by reading/adding each word of the EEPROM
654 * up to the checksum. Then calculates the EEPROM checksum and writes the
655 * value to the EEPROM.
656 **/
657s32 igb_update_nvm_checksum(struct e1000_hw *hw)
658{
659 s32 ret_val;
660 u16 checksum = 0;
661 u16 i, nvm_data;
662
663 for (i = 0; i < NVM_CHECKSUM_REG; i++) {
664 ret_val = hw->nvm.ops.read(hw, i, 1, &nvm_data);
665 if (ret_val) {
666 hw_dbg("NVM Read Error while updating checksum.\n");
667 goto out;
668 }
669 checksum += nvm_data;
670 }
671 checksum = (u16) NVM_SUM - checksum;
672 ret_val = hw->nvm.ops.write(hw, NVM_CHECKSUM_REG, 1, &checksum);
673 if (ret_val)
674 hw_dbg("NVM Write Error while updating checksum.\n");
675
676out:
677 return ret_val;
678}
679
680/**
681 * igb_get_fw_version - Get firmware version information
682 * @hw: pointer to the HW structure
683 * @fw_vers: pointer to output structure
684 *
685 * unsupported MAC types will return all 0 version structure
686 **/
687void igb_get_fw_version(struct e1000_hw *hw, struct e1000_fw_version *fw_vers)
688{
689 u16 eeprom_verh, eeprom_verl, etrack_test, fw_version;
690 u8 q, hval, rem, result;
691 u16 comb_verh, comb_verl, comb_offset;
692
693 memset(fw_vers, 0, sizeof(struct e1000_fw_version));
694
695 /* basic eeprom version numbers and bits used vary by part and by tool
696 * used to create the nvm images. Check which data format we have.
697 */
698 hw->nvm.ops.read(hw, NVM_ETRACK_HIWORD, 1, &etrack_test);
699 switch (hw->mac.type) {
700 case e1000_i211:
701 igb_read_invm_version(hw, fw_vers);
702 return;
703 case e1000_82575:
704 case e1000_82576:
705 case e1000_82580:
706 /* Use this format, unless EETRACK ID exists,
707 * then use alternate format
708 */
709 if ((etrack_test & NVM_MAJOR_MASK) != NVM_ETRACK_VALID) {
710 hw->nvm.ops.read(hw, NVM_VERSION, 1, &fw_version);
711 fw_vers->eep_major = FIELD_GET(NVM_MAJOR_MASK,
712 fw_version);
713 fw_vers->eep_minor = FIELD_GET(NVM_MINOR_MASK,
714 fw_version);
715 fw_vers->eep_build = (fw_version & NVM_IMAGE_ID_MASK);
716 goto etrack_id;
717 }
718 break;
719 case e1000_i210:
720 if (!(igb_get_flash_presence_i210(hw))) {
721 igb_read_invm_version(hw, fw_vers);
722 return;
723 }
724 fallthrough;
725 case e1000_i350:
726 /* find combo image version */
727 hw->nvm.ops.read(hw, NVM_COMB_VER_PTR, 1, &comb_offset);
728 if ((comb_offset != 0x0) &&
729 (comb_offset != NVM_VER_INVALID)) {
730
731 hw->nvm.ops.read(hw, (NVM_COMB_VER_OFF + comb_offset
732 + 1), 1, &comb_verh);
733 hw->nvm.ops.read(hw, (NVM_COMB_VER_OFF + comb_offset),
734 1, &comb_verl);
735
736 /* get Option Rom version if it exists and is valid */
737 if ((comb_verh && comb_verl) &&
738 ((comb_verh != NVM_VER_INVALID) &&
739 (comb_verl != NVM_VER_INVALID))) {
740
741 fw_vers->or_valid = true;
742 fw_vers->or_major =
743 comb_verl >> NVM_COMB_VER_SHFT;
744 fw_vers->or_build =
745 (comb_verl << NVM_COMB_VER_SHFT)
746 | (comb_verh >> NVM_COMB_VER_SHFT);
747 fw_vers->or_patch =
748 comb_verh & NVM_COMB_VER_MASK;
749 }
750 }
751 break;
752 default:
753 return;
754 }
755 hw->nvm.ops.read(hw, NVM_VERSION, 1, &fw_version);
756 fw_vers->eep_major = FIELD_GET(NVM_MAJOR_MASK, fw_version);
757
758 /* check for old style version format in newer images*/
759 if ((fw_version & NVM_NEW_DEC_MASK) == 0x0) {
760 eeprom_verl = (fw_version & NVM_COMB_VER_MASK);
761 } else {
762 eeprom_verl = FIELD_GET(NVM_MINOR_MASK, fw_version);
763 }
764 /* Convert minor value to hex before assigning to output struct
765 * Val to be converted will not be higher than 99, per tool output
766 */
767 q = eeprom_verl / NVM_HEX_CONV;
768 hval = q * NVM_HEX_TENS;
769 rem = eeprom_verl % NVM_HEX_CONV;
770 result = hval + rem;
771 fw_vers->eep_minor = result;
772
773etrack_id:
774 if ((etrack_test & NVM_MAJOR_MASK) == NVM_ETRACK_VALID) {
775 hw->nvm.ops.read(hw, NVM_ETRACK_WORD, 1, &eeprom_verl);
776 hw->nvm.ops.read(hw, (NVM_ETRACK_WORD + 1), 1, &eeprom_verh);
777 fw_vers->etrack_id = (eeprom_verh << NVM_ETRACK_SHIFT)
778 | eeprom_verl;
779 }
780}
1/*******************************************************************************
2
3 Intel(R) Gigabit Ethernet Linux driver
4 Copyright(c) 2007-2012 Intel Corporation.
5
6 This program is free software; you can redistribute it and/or modify it
7 under the terms and conditions of the GNU General Public License,
8 version 2, as published by the Free Software Foundation.
9
10 This program is distributed in the hope it will be useful, but WITHOUT
11 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
13 more details.
14
15 You should have received a copy of the GNU General Public License along with
16 this program; if not, write to the Free Software Foundation, Inc.,
17 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
18
19 The full GNU General Public License is included in this distribution in
20 the file called "COPYING".
21
22 Contact Information:
23 e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
24 Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
25
26*******************************************************************************/
27
28#include <linux/if_ether.h>
29#include <linux/delay.h>
30
31#include "e1000_mac.h"
32#include "e1000_nvm.h"
33
34/**
35 * igb_raise_eec_clk - Raise EEPROM clock
36 * @hw: pointer to the HW structure
37 * @eecd: pointer to the EEPROM
38 *
39 * Enable/Raise the EEPROM clock bit.
40 **/
41static void igb_raise_eec_clk(struct e1000_hw *hw, u32 *eecd)
42{
43 *eecd = *eecd | E1000_EECD_SK;
44 wr32(E1000_EECD, *eecd);
45 wrfl();
46 udelay(hw->nvm.delay_usec);
47}
48
49/**
50 * igb_lower_eec_clk - Lower EEPROM clock
51 * @hw: pointer to the HW structure
52 * @eecd: pointer to the EEPROM
53 *
54 * Clear/Lower the EEPROM clock bit.
55 **/
56static void igb_lower_eec_clk(struct e1000_hw *hw, u32 *eecd)
57{
58 *eecd = *eecd & ~E1000_EECD_SK;
59 wr32(E1000_EECD, *eecd);
60 wrfl();
61 udelay(hw->nvm.delay_usec);
62}
63
64/**
65 * igb_shift_out_eec_bits - Shift data bits our to the EEPROM
66 * @hw: pointer to the HW structure
67 * @data: data to send to the EEPROM
68 * @count: number of bits to shift out
69 *
70 * We need to shift 'count' bits out to the EEPROM. So, the value in the
71 * "data" parameter will be shifted out to the EEPROM one bit at a time.
72 * In order to do this, "data" must be broken down into bits.
73 **/
74static void igb_shift_out_eec_bits(struct e1000_hw *hw, u16 data, u16 count)
75{
76 struct e1000_nvm_info *nvm = &hw->nvm;
77 u32 eecd = rd32(E1000_EECD);
78 u32 mask;
79
80 mask = 0x01 << (count - 1);
81 if (nvm->type == e1000_nvm_eeprom_spi)
82 eecd |= E1000_EECD_DO;
83
84 do {
85 eecd &= ~E1000_EECD_DI;
86
87 if (data & mask)
88 eecd |= E1000_EECD_DI;
89
90 wr32(E1000_EECD, eecd);
91 wrfl();
92
93 udelay(nvm->delay_usec);
94
95 igb_raise_eec_clk(hw, &eecd);
96 igb_lower_eec_clk(hw, &eecd);
97
98 mask >>= 1;
99 } while (mask);
100
101 eecd &= ~E1000_EECD_DI;
102 wr32(E1000_EECD, eecd);
103}
104
105/**
106 * igb_shift_in_eec_bits - Shift data bits in from the EEPROM
107 * @hw: pointer to the HW structure
108 * @count: number of bits to shift in
109 *
110 * In order to read a register from the EEPROM, we need to shift 'count' bits
111 * in from the EEPROM. Bits are "shifted in" by raising the clock input to
112 * the EEPROM (setting the SK bit), and then reading the value of the data out
113 * "DO" bit. During this "shifting in" process the data in "DI" bit should
114 * always be clear.
115 **/
116static u16 igb_shift_in_eec_bits(struct e1000_hw *hw, u16 count)
117{
118 u32 eecd;
119 u32 i;
120 u16 data;
121
122 eecd = rd32(E1000_EECD);
123
124 eecd &= ~(E1000_EECD_DO | E1000_EECD_DI);
125 data = 0;
126
127 for (i = 0; i < count; i++) {
128 data <<= 1;
129 igb_raise_eec_clk(hw, &eecd);
130
131 eecd = rd32(E1000_EECD);
132
133 eecd &= ~E1000_EECD_DI;
134 if (eecd & E1000_EECD_DO)
135 data |= 1;
136
137 igb_lower_eec_clk(hw, &eecd);
138 }
139
140 return data;
141}
142
143/**
144 * igb_poll_eerd_eewr_done - Poll for EEPROM read/write completion
145 * @hw: pointer to the HW structure
146 * @ee_reg: EEPROM flag for polling
147 *
148 * Polls the EEPROM status bit for either read or write completion based
149 * upon the value of 'ee_reg'.
150 **/
151static s32 igb_poll_eerd_eewr_done(struct e1000_hw *hw, int ee_reg)
152{
153 u32 attempts = 100000;
154 u32 i, reg = 0;
155 s32 ret_val = -E1000_ERR_NVM;
156
157 for (i = 0; i < attempts; i++) {
158 if (ee_reg == E1000_NVM_POLL_READ)
159 reg = rd32(E1000_EERD);
160 else
161 reg = rd32(E1000_EEWR);
162
163 if (reg & E1000_NVM_RW_REG_DONE) {
164 ret_val = 0;
165 break;
166 }
167
168 udelay(5);
169 }
170
171 return ret_val;
172}
173
174/**
175 * igb_acquire_nvm - Generic request for access to EEPROM
176 * @hw: pointer to the HW structure
177 *
178 * Set the EEPROM access request bit and wait for EEPROM access grant bit.
179 * Return successful if access grant bit set, else clear the request for
180 * EEPROM access and return -E1000_ERR_NVM (-1).
181 **/
182s32 igb_acquire_nvm(struct e1000_hw *hw)
183{
184 u32 eecd = rd32(E1000_EECD);
185 s32 timeout = E1000_NVM_GRANT_ATTEMPTS;
186 s32 ret_val = 0;
187
188
189 wr32(E1000_EECD, eecd | E1000_EECD_REQ);
190 eecd = rd32(E1000_EECD);
191
192 while (timeout) {
193 if (eecd & E1000_EECD_GNT)
194 break;
195 udelay(5);
196 eecd = rd32(E1000_EECD);
197 timeout--;
198 }
199
200 if (!timeout) {
201 eecd &= ~E1000_EECD_REQ;
202 wr32(E1000_EECD, eecd);
203 hw_dbg("Could not acquire NVM grant\n");
204 ret_val = -E1000_ERR_NVM;
205 }
206
207 return ret_val;
208}
209
210/**
211 * igb_standby_nvm - Return EEPROM to standby state
212 * @hw: pointer to the HW structure
213 *
214 * Return the EEPROM to a standby state.
215 **/
216static void igb_standby_nvm(struct e1000_hw *hw)
217{
218 struct e1000_nvm_info *nvm = &hw->nvm;
219 u32 eecd = rd32(E1000_EECD);
220
221 if (nvm->type == e1000_nvm_eeprom_spi) {
222 /* Toggle CS to flush commands */
223 eecd |= E1000_EECD_CS;
224 wr32(E1000_EECD, eecd);
225 wrfl();
226 udelay(nvm->delay_usec);
227 eecd &= ~E1000_EECD_CS;
228 wr32(E1000_EECD, eecd);
229 wrfl();
230 udelay(nvm->delay_usec);
231 }
232}
233
234/**
235 * e1000_stop_nvm - Terminate EEPROM command
236 * @hw: pointer to the HW structure
237 *
238 * Terminates the current command by inverting the EEPROM's chip select pin.
239 **/
240static void e1000_stop_nvm(struct e1000_hw *hw)
241{
242 u32 eecd;
243
244 eecd = rd32(E1000_EECD);
245 if (hw->nvm.type == e1000_nvm_eeprom_spi) {
246 /* Pull CS high */
247 eecd |= E1000_EECD_CS;
248 igb_lower_eec_clk(hw, &eecd);
249 }
250}
251
252/**
253 * igb_release_nvm - Release exclusive access to EEPROM
254 * @hw: pointer to the HW structure
255 *
256 * Stop any current commands to the EEPROM and clear the EEPROM request bit.
257 **/
258void igb_release_nvm(struct e1000_hw *hw)
259{
260 u32 eecd;
261
262 e1000_stop_nvm(hw);
263
264 eecd = rd32(E1000_EECD);
265 eecd &= ~E1000_EECD_REQ;
266 wr32(E1000_EECD, eecd);
267}
268
269/**
270 * igb_ready_nvm_eeprom - Prepares EEPROM for read/write
271 * @hw: pointer to the HW structure
272 *
273 * Setups the EEPROM for reading and writing.
274 **/
275static s32 igb_ready_nvm_eeprom(struct e1000_hw *hw)
276{
277 struct e1000_nvm_info *nvm = &hw->nvm;
278 u32 eecd = rd32(E1000_EECD);
279 s32 ret_val = 0;
280 u16 timeout = 0;
281 u8 spi_stat_reg;
282
283
284 if (nvm->type == e1000_nvm_eeprom_spi) {
285 /* Clear SK and CS */
286 eecd &= ~(E1000_EECD_CS | E1000_EECD_SK);
287 wr32(E1000_EECD, eecd);
288 wrfl();
289 udelay(1);
290 timeout = NVM_MAX_RETRY_SPI;
291
292 /*
293 * Read "Status Register" repeatedly until the LSB is cleared.
294 * The EEPROM will signal that the command has been completed
295 * by clearing bit 0 of the internal status register. If it's
296 * not cleared within 'timeout', then error out.
297 */
298 while (timeout) {
299 igb_shift_out_eec_bits(hw, NVM_RDSR_OPCODE_SPI,
300 hw->nvm.opcode_bits);
301 spi_stat_reg = (u8)igb_shift_in_eec_bits(hw, 8);
302 if (!(spi_stat_reg & NVM_STATUS_RDY_SPI))
303 break;
304
305 udelay(5);
306 igb_standby_nvm(hw);
307 timeout--;
308 }
309
310 if (!timeout) {
311 hw_dbg("SPI NVM Status error\n");
312 ret_val = -E1000_ERR_NVM;
313 goto out;
314 }
315 }
316
317out:
318 return ret_val;
319}
320
321/**
322 * igb_read_nvm_spi - Read EEPROM's using SPI
323 * @hw: pointer to the HW structure
324 * @offset: offset of word in the EEPROM to read
325 * @words: number of words to read
326 * @data: word read from the EEPROM
327 *
328 * Reads a 16 bit word from the EEPROM.
329 **/
330s32 igb_read_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
331{
332 struct e1000_nvm_info *nvm = &hw->nvm;
333 u32 i = 0;
334 s32 ret_val;
335 u16 word_in;
336 u8 read_opcode = NVM_READ_OPCODE_SPI;
337
338 /*
339 * A check for invalid values: offset too large, too many words,
340 * and not enough words.
341 */
342 if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
343 (words == 0)) {
344 hw_dbg("nvm parameter(s) out of bounds\n");
345 ret_val = -E1000_ERR_NVM;
346 goto out;
347 }
348
349 ret_val = nvm->ops.acquire(hw);
350 if (ret_val)
351 goto out;
352
353 ret_val = igb_ready_nvm_eeprom(hw);
354 if (ret_val)
355 goto release;
356
357 igb_standby_nvm(hw);
358
359 if ((nvm->address_bits == 8) && (offset >= 128))
360 read_opcode |= NVM_A8_OPCODE_SPI;
361
362 /* Send the READ command (opcode + addr) */
363 igb_shift_out_eec_bits(hw, read_opcode, nvm->opcode_bits);
364 igb_shift_out_eec_bits(hw, (u16)(offset*2), nvm->address_bits);
365
366 /*
367 * Read the data. SPI NVMs increment the address with each byte
368 * read and will roll over if reading beyond the end. This allows
369 * us to read the whole NVM from any offset
370 */
371 for (i = 0; i < words; i++) {
372 word_in = igb_shift_in_eec_bits(hw, 16);
373 data[i] = (word_in >> 8) | (word_in << 8);
374 }
375
376release:
377 nvm->ops.release(hw);
378
379out:
380 return ret_val;
381}
382
383/**
384 * igb_read_nvm_eerd - Reads EEPROM using EERD register
385 * @hw: pointer to the HW structure
386 * @offset: offset of word in the EEPROM to read
387 * @words: number of words to read
388 * @data: word read from the EEPROM
389 *
390 * Reads a 16 bit word from the EEPROM using the EERD register.
391 **/
392s32 igb_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
393{
394 struct e1000_nvm_info *nvm = &hw->nvm;
395 u32 i, eerd = 0;
396 s32 ret_val = 0;
397
398 /*
399 * A check for invalid values: offset too large, too many words,
400 * and not enough words.
401 */
402 if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
403 (words == 0)) {
404 hw_dbg("nvm parameter(s) out of bounds\n");
405 ret_val = -E1000_ERR_NVM;
406 goto out;
407 }
408
409 for (i = 0; i < words; i++) {
410 eerd = ((offset+i) << E1000_NVM_RW_ADDR_SHIFT) +
411 E1000_NVM_RW_REG_START;
412
413 wr32(E1000_EERD, eerd);
414 ret_val = igb_poll_eerd_eewr_done(hw, E1000_NVM_POLL_READ);
415 if (ret_val)
416 break;
417
418 data[i] = (rd32(E1000_EERD) >>
419 E1000_NVM_RW_REG_DATA);
420 }
421
422out:
423 return ret_val;
424}
425
426/**
427 * igb_write_nvm_spi - Write to EEPROM using SPI
428 * @hw: pointer to the HW structure
429 * @offset: offset within the EEPROM to be written to
430 * @words: number of words to write
431 * @data: 16 bit word(s) to be written to the EEPROM
432 *
433 * Writes data to EEPROM at offset using SPI interface.
434 *
435 * If e1000_update_nvm_checksum is not called after this function , the
436 * EEPROM will most likley contain an invalid checksum.
437 **/
438s32 igb_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
439{
440 struct e1000_nvm_info *nvm = &hw->nvm;
441 s32 ret_val;
442 u16 widx = 0;
443
444 /*
445 * A check for invalid values: offset too large, too many words,
446 * and not enough words.
447 */
448 if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
449 (words == 0)) {
450 hw_dbg("nvm parameter(s) out of bounds\n");
451 ret_val = -E1000_ERR_NVM;
452 goto out;
453 }
454
455 ret_val = hw->nvm.ops.acquire(hw);
456 if (ret_val)
457 goto out;
458
459 msleep(10);
460
461 while (widx < words) {
462 u8 write_opcode = NVM_WRITE_OPCODE_SPI;
463
464 ret_val = igb_ready_nvm_eeprom(hw);
465 if (ret_val)
466 goto release;
467
468 igb_standby_nvm(hw);
469
470 /* Send the WRITE ENABLE command (8 bit opcode) */
471 igb_shift_out_eec_bits(hw, NVM_WREN_OPCODE_SPI,
472 nvm->opcode_bits);
473
474 igb_standby_nvm(hw);
475
476 /*
477 * Some SPI eeproms use the 8th address bit embedded in the
478 * opcode
479 */
480 if ((nvm->address_bits == 8) && (offset >= 128))
481 write_opcode |= NVM_A8_OPCODE_SPI;
482
483 /* Send the Write command (8-bit opcode + addr) */
484 igb_shift_out_eec_bits(hw, write_opcode, nvm->opcode_bits);
485 igb_shift_out_eec_bits(hw, (u16)((offset + widx) * 2),
486 nvm->address_bits);
487
488 /* Loop to allow for up to whole page write of eeprom */
489 while (widx < words) {
490 u16 word_out = data[widx];
491 word_out = (word_out >> 8) | (word_out << 8);
492 igb_shift_out_eec_bits(hw, word_out, 16);
493 widx++;
494
495 if ((((offset + widx) * 2) % nvm->page_size) == 0) {
496 igb_standby_nvm(hw);
497 break;
498 }
499 }
500 }
501
502 msleep(10);
503release:
504 hw->nvm.ops.release(hw);
505
506out:
507 return ret_val;
508}
509
510/**
511 * igb_read_part_string - Read device part number
512 * @hw: pointer to the HW structure
513 * @part_num: pointer to device part number
514 * @part_num_size: size of part number buffer
515 *
516 * Reads the product board assembly (PBA) number from the EEPROM and stores
517 * the value in part_num.
518 **/
519s32 igb_read_part_string(struct e1000_hw *hw, u8 *part_num, u32 part_num_size)
520{
521 s32 ret_val;
522 u16 nvm_data;
523 u16 pointer;
524 u16 offset;
525 u16 length;
526
527 if (part_num == NULL) {
528 hw_dbg("PBA string buffer was null\n");
529 ret_val = E1000_ERR_INVALID_ARGUMENT;
530 goto out;
531 }
532
533 ret_val = hw->nvm.ops.read(hw, NVM_PBA_OFFSET_0, 1, &nvm_data);
534 if (ret_val) {
535 hw_dbg("NVM Read Error\n");
536 goto out;
537 }
538
539 ret_val = hw->nvm.ops.read(hw, NVM_PBA_OFFSET_1, 1, &pointer);
540 if (ret_val) {
541 hw_dbg("NVM Read Error\n");
542 goto out;
543 }
544
545 /*
546 * if nvm_data is not ptr guard the PBA must be in legacy format which
547 * means pointer is actually our second data word for the PBA number
548 * and we can decode it into an ascii string
549 */
550 if (nvm_data != NVM_PBA_PTR_GUARD) {
551 hw_dbg("NVM PBA number is not stored as string\n");
552
553 /* we will need 11 characters to store the PBA */
554 if (part_num_size < 11) {
555 hw_dbg("PBA string buffer too small\n");
556 return E1000_ERR_NO_SPACE;
557 }
558
559 /* extract hex string from data and pointer */
560 part_num[0] = (nvm_data >> 12) & 0xF;
561 part_num[1] = (nvm_data >> 8) & 0xF;
562 part_num[2] = (nvm_data >> 4) & 0xF;
563 part_num[3] = nvm_data & 0xF;
564 part_num[4] = (pointer >> 12) & 0xF;
565 part_num[5] = (pointer >> 8) & 0xF;
566 part_num[6] = '-';
567 part_num[7] = 0;
568 part_num[8] = (pointer >> 4) & 0xF;
569 part_num[9] = pointer & 0xF;
570
571 /* put a null character on the end of our string */
572 part_num[10] = '\0';
573
574 /* switch all the data but the '-' to hex char */
575 for (offset = 0; offset < 10; offset++) {
576 if (part_num[offset] < 0xA)
577 part_num[offset] += '0';
578 else if (part_num[offset] < 0x10)
579 part_num[offset] += 'A' - 0xA;
580 }
581
582 goto out;
583 }
584
585 ret_val = hw->nvm.ops.read(hw, pointer, 1, &length);
586 if (ret_val) {
587 hw_dbg("NVM Read Error\n");
588 goto out;
589 }
590
591 if (length == 0xFFFF || length == 0) {
592 hw_dbg("NVM PBA number section invalid length\n");
593 ret_val = E1000_ERR_NVM_PBA_SECTION;
594 goto out;
595 }
596 /* check if part_num buffer is big enough */
597 if (part_num_size < (((u32)length * 2) - 1)) {
598 hw_dbg("PBA string buffer too small\n");
599 ret_val = E1000_ERR_NO_SPACE;
600 goto out;
601 }
602
603 /* trim pba length from start of string */
604 pointer++;
605 length--;
606
607 for (offset = 0; offset < length; offset++) {
608 ret_val = hw->nvm.ops.read(hw, pointer + offset, 1, &nvm_data);
609 if (ret_val) {
610 hw_dbg("NVM Read Error\n");
611 goto out;
612 }
613 part_num[offset * 2] = (u8)(nvm_data >> 8);
614 part_num[(offset * 2) + 1] = (u8)(nvm_data & 0xFF);
615 }
616 part_num[offset * 2] = '\0';
617
618out:
619 return ret_val;
620}
621
622/**
623 * igb_read_mac_addr - Read device MAC address
624 * @hw: pointer to the HW structure
625 *
626 * Reads the device MAC address from the EEPROM and stores the value.
627 * Since devices with two ports use the same EEPROM, we increment the
628 * last bit in the MAC address for the second port.
629 **/
630s32 igb_read_mac_addr(struct e1000_hw *hw)
631{
632 u32 rar_high;
633 u32 rar_low;
634 u16 i;
635
636 rar_high = rd32(E1000_RAH(0));
637 rar_low = rd32(E1000_RAL(0));
638
639 for (i = 0; i < E1000_RAL_MAC_ADDR_LEN; i++)
640 hw->mac.perm_addr[i] = (u8)(rar_low >> (i*8));
641
642 for (i = 0; i < E1000_RAH_MAC_ADDR_LEN; i++)
643 hw->mac.perm_addr[i+4] = (u8)(rar_high >> (i*8));
644
645 for (i = 0; i < ETH_ALEN; i++)
646 hw->mac.addr[i] = hw->mac.perm_addr[i];
647
648 return 0;
649}
650
651/**
652 * igb_validate_nvm_checksum - Validate EEPROM checksum
653 * @hw: pointer to the HW structure
654 *
655 * Calculates the EEPROM checksum by reading/adding each word of the EEPROM
656 * and then verifies that the sum of the EEPROM is equal to 0xBABA.
657 **/
658s32 igb_validate_nvm_checksum(struct e1000_hw *hw)
659{
660 s32 ret_val = 0;
661 u16 checksum = 0;
662 u16 i, nvm_data;
663
664 for (i = 0; i < (NVM_CHECKSUM_REG + 1); i++) {
665 ret_val = hw->nvm.ops.read(hw, i, 1, &nvm_data);
666 if (ret_val) {
667 hw_dbg("NVM Read Error\n");
668 goto out;
669 }
670 checksum += nvm_data;
671 }
672
673 if (checksum != (u16) NVM_SUM) {
674 hw_dbg("NVM Checksum Invalid\n");
675 ret_val = -E1000_ERR_NVM;
676 goto out;
677 }
678
679out:
680 return ret_val;
681}
682
683/**
684 * igb_update_nvm_checksum - Update EEPROM checksum
685 * @hw: pointer to the HW structure
686 *
687 * Updates the EEPROM checksum by reading/adding each word of the EEPROM
688 * up to the checksum. Then calculates the EEPROM checksum and writes the
689 * value to the EEPROM.
690 **/
691s32 igb_update_nvm_checksum(struct e1000_hw *hw)
692{
693 s32 ret_val;
694 u16 checksum = 0;
695 u16 i, nvm_data;
696
697 for (i = 0; i < NVM_CHECKSUM_REG; i++) {
698 ret_val = hw->nvm.ops.read(hw, i, 1, &nvm_data);
699 if (ret_val) {
700 hw_dbg("NVM Read Error while updating checksum.\n");
701 goto out;
702 }
703 checksum += nvm_data;
704 }
705 checksum = (u16) NVM_SUM - checksum;
706 ret_val = hw->nvm.ops.write(hw, NVM_CHECKSUM_REG, 1, &checksum);
707 if (ret_val)
708 hw_dbg("NVM Write Error while updating checksum.\n");
709
710out:
711 return ret_val;
712}