Loading...
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Xilinx XPS PS/2 device driver
4 *
5 * (c) 2005 MontaVista Software, Inc.
6 * (c) 2008 Xilinx, Inc.
7 */
8
9
10#include <linux/module.h>
11#include <linux/serio.h>
12#include <linux/interrupt.h>
13#include <linux/errno.h>
14#include <linux/slab.h>
15#include <linux/list.h>
16#include <linux/io.h>
17#include <linux/mod_devicetable.h>
18#include <linux/of_address.h>
19#include <linux/of_irq.h>
20#include <linux/platform_device.h>
21
22#define DRIVER_NAME "xilinx_ps2"
23
24/* Register offsets for the xps2 device */
25#define XPS2_SRST_OFFSET 0x00000000 /* Software Reset register */
26#define XPS2_STATUS_OFFSET 0x00000004 /* Status register */
27#define XPS2_RX_DATA_OFFSET 0x00000008 /* Receive Data register */
28#define XPS2_TX_DATA_OFFSET 0x0000000C /* Transmit Data register */
29#define XPS2_GIER_OFFSET 0x0000002C /* Global Interrupt Enable reg */
30#define XPS2_IPISR_OFFSET 0x00000030 /* Interrupt Status register */
31#define XPS2_IPIER_OFFSET 0x00000038 /* Interrupt Enable register */
32
33/* Reset Register Bit Definitions */
34#define XPS2_SRST_RESET 0x0000000A /* Software Reset */
35
36/* Status Register Bit Positions */
37#define XPS2_STATUS_RX_FULL 0x00000001 /* Receive Full */
38#define XPS2_STATUS_TX_FULL 0x00000002 /* Transmit Full */
39
40/*
41 * Bit definitions for ISR/IER registers. Both the registers have the same bit
42 * definitions and are only defined once.
43 */
44#define XPS2_IPIXR_WDT_TOUT 0x00000001 /* Watchdog Timeout Interrupt */
45#define XPS2_IPIXR_TX_NOACK 0x00000002 /* Transmit No ACK Interrupt */
46#define XPS2_IPIXR_TX_ACK 0x00000004 /* Transmit ACK (Data) Interrupt */
47#define XPS2_IPIXR_RX_OVF 0x00000008 /* Receive Overflow Interrupt */
48#define XPS2_IPIXR_RX_ERR 0x00000010 /* Receive Error Interrupt */
49#define XPS2_IPIXR_RX_FULL 0x00000020 /* Receive Data Interrupt */
50
51/* Mask for all the Transmit Interrupts */
52#define XPS2_IPIXR_TX_ALL (XPS2_IPIXR_TX_NOACK | XPS2_IPIXR_TX_ACK)
53
54/* Mask for all the Receive Interrupts */
55#define XPS2_IPIXR_RX_ALL (XPS2_IPIXR_RX_OVF | XPS2_IPIXR_RX_ERR | \
56 XPS2_IPIXR_RX_FULL)
57
58/* Mask for all the Interrupts */
59#define XPS2_IPIXR_ALL (XPS2_IPIXR_TX_ALL | XPS2_IPIXR_RX_ALL | \
60 XPS2_IPIXR_WDT_TOUT)
61
62/* Global Interrupt Enable mask */
63#define XPS2_GIER_GIE_MASK 0x80000000
64
65struct xps2data {
66 int irq;
67 spinlock_t lock;
68 void __iomem *base_address; /* virt. address of control registers */
69 unsigned int flags;
70 struct serio *serio; /* serio */
71 struct device *dev;
72};
73
74/************************************/
75/* XPS PS/2 data transmission calls */
76/************************************/
77
78/**
79 * xps2_recv() - attempts to receive a byte from the PS/2 port.
80 * @drvdata: pointer to ps2 device private data structure
81 * @byte: address where the read data will be copied
82 *
83 * If there is any data available in the PS/2 receiver, this functions reads
84 * the data, otherwise it returns error.
85 */
86static int xps2_recv(struct xps2data *drvdata, u8 *byte)
87{
88 u32 sr;
89 int status = -1;
90
91 /* If there is data available in the PS/2 receiver, read it */
92 sr = in_be32(drvdata->base_address + XPS2_STATUS_OFFSET);
93 if (sr & XPS2_STATUS_RX_FULL) {
94 *byte = in_be32(drvdata->base_address + XPS2_RX_DATA_OFFSET);
95 status = 0;
96 }
97
98 return status;
99}
100
101/*********************/
102/* Interrupt handler */
103/*********************/
104static irqreturn_t xps2_interrupt(int irq, void *dev_id)
105{
106 struct xps2data *drvdata = dev_id;
107 u32 intr_sr;
108 u8 c;
109 int status;
110
111 /* Get the PS/2 interrupts and clear them */
112 intr_sr = in_be32(drvdata->base_address + XPS2_IPISR_OFFSET);
113 out_be32(drvdata->base_address + XPS2_IPISR_OFFSET, intr_sr);
114
115 /* Check which interrupt is active */
116 if (intr_sr & XPS2_IPIXR_RX_OVF)
117 dev_warn(drvdata->dev, "receive overrun error\n");
118
119 if (intr_sr & XPS2_IPIXR_RX_ERR)
120 drvdata->flags |= SERIO_PARITY;
121
122 if (intr_sr & (XPS2_IPIXR_TX_NOACK | XPS2_IPIXR_WDT_TOUT))
123 drvdata->flags |= SERIO_TIMEOUT;
124
125 if (intr_sr & XPS2_IPIXR_RX_FULL) {
126 status = xps2_recv(drvdata, &c);
127
128 /* Error, if a byte is not received */
129 if (status) {
130 dev_err(drvdata->dev,
131 "wrong rcvd byte count (%d)\n", status);
132 } else {
133 serio_interrupt(drvdata->serio, c, drvdata->flags);
134 drvdata->flags = 0;
135 }
136 }
137
138 return IRQ_HANDLED;
139}
140
141/*******************/
142/* serio callbacks */
143/*******************/
144
145/**
146 * sxps2_write() - sends a byte out through the PS/2 port.
147 * @pserio: pointer to the serio structure of the PS/2 port
148 * @c: data that needs to be written to the PS/2 port
149 *
150 * This function checks if the PS/2 transmitter is empty and sends a byte.
151 * Otherwise it returns error. Transmission fails only when nothing is connected
152 * to the PS/2 port. Thats why, we do not try to resend the data in case of a
153 * failure.
154 */
155static int sxps2_write(struct serio *pserio, unsigned char c)
156{
157 struct xps2data *drvdata = pserio->port_data;
158 unsigned long flags;
159 u32 sr;
160 int status = -1;
161
162 spin_lock_irqsave(&drvdata->lock, flags);
163
164 /* If the PS/2 transmitter is empty send a byte of data */
165 sr = in_be32(drvdata->base_address + XPS2_STATUS_OFFSET);
166 if (!(sr & XPS2_STATUS_TX_FULL)) {
167 out_be32(drvdata->base_address + XPS2_TX_DATA_OFFSET, c);
168 status = 0;
169 }
170
171 spin_unlock_irqrestore(&drvdata->lock, flags);
172
173 return status;
174}
175
176/**
177 * sxps2_open() - called when a port is opened by the higher layer.
178 * @pserio: pointer to the serio structure of the PS/2 device
179 *
180 * This function requests irq and enables interrupts for the PS/2 device.
181 */
182static int sxps2_open(struct serio *pserio)
183{
184 struct xps2data *drvdata = pserio->port_data;
185 int error;
186 u8 c;
187
188 error = request_irq(drvdata->irq, &xps2_interrupt, 0,
189 DRIVER_NAME, drvdata);
190 if (error) {
191 dev_err(drvdata->dev,
192 "Couldn't allocate interrupt %d\n", drvdata->irq);
193 return error;
194 }
195
196 /* start reception by enabling the interrupts */
197 out_be32(drvdata->base_address + XPS2_GIER_OFFSET, XPS2_GIER_GIE_MASK);
198 out_be32(drvdata->base_address + XPS2_IPIER_OFFSET, XPS2_IPIXR_RX_ALL);
199 (void)xps2_recv(drvdata, &c);
200
201 return 0; /* success */
202}
203
204/**
205 * sxps2_close() - frees the interrupt.
206 * @pserio: pointer to the serio structure of the PS/2 device
207 *
208 * This function frees the irq and disables interrupts for the PS/2 device.
209 */
210static void sxps2_close(struct serio *pserio)
211{
212 struct xps2data *drvdata = pserio->port_data;
213
214 /* Disable the PS2 interrupts */
215 out_be32(drvdata->base_address + XPS2_GIER_OFFSET, 0x00);
216 out_be32(drvdata->base_address + XPS2_IPIER_OFFSET, 0x00);
217 free_irq(drvdata->irq, drvdata);
218}
219
220/**
221 * xps2_of_probe - probe method for the PS/2 device.
222 * @of_dev: pointer to OF device structure
223 * @match: pointer to the structure used for matching a device
224 *
225 * This function probes the PS/2 device in the device tree.
226 * It initializes the driver data structure and the hardware.
227 * It returns 0, if the driver is bound to the PS/2 device, or a negative
228 * value if there is an error.
229 */
230static int xps2_of_probe(struct platform_device *ofdev)
231{
232 struct resource r_mem; /* IO mem resources */
233 struct xps2data *drvdata;
234 struct serio *serio;
235 struct device *dev = &ofdev->dev;
236 resource_size_t remap_size, phys_addr;
237 unsigned int irq;
238 int error;
239
240 dev_info(dev, "Device Tree Probing \'%pOFn\'\n", dev->of_node);
241
242 /* Get iospace for the device */
243 error = of_address_to_resource(dev->of_node, 0, &r_mem);
244 if (error) {
245 dev_err(dev, "invalid address\n");
246 return error;
247 }
248
249 /* Get IRQ for the device */
250 irq = irq_of_parse_and_map(dev->of_node, 0);
251 if (!irq) {
252 dev_err(dev, "no IRQ found\n");
253 return -ENODEV;
254 }
255
256 drvdata = kzalloc(sizeof(struct xps2data), GFP_KERNEL);
257 serio = kzalloc(sizeof(struct serio), GFP_KERNEL);
258 if (!drvdata || !serio) {
259 error = -ENOMEM;
260 goto failed1;
261 }
262
263 spin_lock_init(&drvdata->lock);
264 drvdata->irq = irq;
265 drvdata->serio = serio;
266 drvdata->dev = dev;
267
268 phys_addr = r_mem.start;
269 remap_size = resource_size(&r_mem);
270 if (!request_mem_region(phys_addr, remap_size, DRIVER_NAME)) {
271 dev_err(dev, "Couldn't lock memory region at 0x%08llX\n",
272 (unsigned long long)phys_addr);
273 error = -EBUSY;
274 goto failed1;
275 }
276
277 /* Fill in configuration data and add them to the list */
278 drvdata->base_address = ioremap(phys_addr, remap_size);
279 if (drvdata->base_address == NULL) {
280 dev_err(dev, "Couldn't ioremap memory at 0x%08llX\n",
281 (unsigned long long)phys_addr);
282 error = -EFAULT;
283 goto failed2;
284 }
285
286 /* Disable all the interrupts, just in case */
287 out_be32(drvdata->base_address + XPS2_IPIER_OFFSET, 0);
288
289 /*
290 * Reset the PS2 device and abort any current transaction,
291 * to make sure we have the PS2 in a good state.
292 */
293 out_be32(drvdata->base_address + XPS2_SRST_OFFSET, XPS2_SRST_RESET);
294
295 dev_info(dev, "Xilinx PS2 at 0x%08llX mapped to 0x%p, irq=%d\n",
296 (unsigned long long)phys_addr, drvdata->base_address,
297 drvdata->irq);
298
299 serio->id.type = SERIO_8042;
300 serio->write = sxps2_write;
301 serio->open = sxps2_open;
302 serio->close = sxps2_close;
303 serio->port_data = drvdata;
304 serio->dev.parent = dev;
305 snprintf(serio->name, sizeof(serio->name),
306 "Xilinx XPS PS/2 at %08llX", (unsigned long long)phys_addr);
307 snprintf(serio->phys, sizeof(serio->phys),
308 "xilinxps2/serio at %08llX", (unsigned long long)phys_addr);
309
310 serio_register_port(serio);
311
312 platform_set_drvdata(ofdev, drvdata);
313 return 0; /* success */
314
315failed2:
316 release_mem_region(phys_addr, remap_size);
317failed1:
318 kfree(serio);
319 kfree(drvdata);
320
321 return error;
322}
323
324/**
325 * xps2_of_remove - unbinds the driver from the PS/2 device.
326 * @of_dev: pointer to OF device structure
327 *
328 * This function is called if a device is physically removed from the system or
329 * if the driver module is being unloaded. It frees any resources allocated to
330 * the device.
331 */
332static void xps2_of_remove(struct platform_device *of_dev)
333{
334 struct xps2data *drvdata = platform_get_drvdata(of_dev);
335 struct resource r_mem; /* IO mem resources */
336
337 serio_unregister_port(drvdata->serio);
338 iounmap(drvdata->base_address);
339
340 /* Get iospace of the device */
341 if (of_address_to_resource(of_dev->dev.of_node, 0, &r_mem))
342 dev_err(drvdata->dev, "invalid address\n");
343 else
344 release_mem_region(r_mem.start, resource_size(&r_mem));
345
346 kfree(drvdata);
347}
348
349/* Match table for of_platform binding */
350static const struct of_device_id xps2_of_match[] = {
351 { .compatible = "xlnx,xps-ps2-1.00.a", },
352 { /* end of list */ },
353};
354MODULE_DEVICE_TABLE(of, xps2_of_match);
355
356static struct platform_driver xps2_of_driver = {
357 .driver = {
358 .name = DRIVER_NAME,
359 .of_match_table = xps2_of_match,
360 },
361 .probe = xps2_of_probe,
362 .remove_new = xps2_of_remove,
363};
364module_platform_driver(xps2_of_driver);
365
366MODULE_AUTHOR("Xilinx, Inc.");
367MODULE_DESCRIPTION("Xilinx XPS PS/2 driver");
368MODULE_LICENSE("GPL");
369
1/*
2 * Xilinx XPS PS/2 device driver
3 *
4 * (c) 2005 MontaVista Software, Inc.
5 * (c) 2008 Xilinx, Inc.
6 *
7 * This program is free software; you can redistribute it and/or modify it
8 * under the terms of the GNU General Public License as published by the
9 * Free Software Foundation; either version 2 of the License, or (at your
10 * option) any later version.
11 *
12 * You should have received a copy of the GNU General Public License along
13 * with this program; if not, write to the Free Software Foundation, Inc.,
14 * 675 Mass Ave, Cambridge, MA 02139, USA.
15 */
16
17
18#include <linux/module.h>
19#include <linux/serio.h>
20#include <linux/interrupt.h>
21#include <linux/errno.h>
22#include <linux/slab.h>
23#include <linux/init.h>
24#include <linux/list.h>
25#include <linux/io.h>
26#include <linux/of_address.h>
27#include <linux/of_device.h>
28#include <linux/of_platform.h>
29
30#define DRIVER_NAME "xilinx_ps2"
31
32/* Register offsets for the xps2 device */
33#define XPS2_SRST_OFFSET 0x00000000 /* Software Reset register */
34#define XPS2_STATUS_OFFSET 0x00000004 /* Status register */
35#define XPS2_RX_DATA_OFFSET 0x00000008 /* Receive Data register */
36#define XPS2_TX_DATA_OFFSET 0x0000000C /* Transmit Data register */
37#define XPS2_GIER_OFFSET 0x0000002C /* Global Interrupt Enable reg */
38#define XPS2_IPISR_OFFSET 0x00000030 /* Interrupt Status register */
39#define XPS2_IPIER_OFFSET 0x00000038 /* Interrupt Enable register */
40
41/* Reset Register Bit Definitions */
42#define XPS2_SRST_RESET 0x0000000A /* Software Reset */
43
44/* Status Register Bit Positions */
45#define XPS2_STATUS_RX_FULL 0x00000001 /* Receive Full */
46#define XPS2_STATUS_TX_FULL 0x00000002 /* Transmit Full */
47
48/* Bit definitions for ISR/IER registers. Both the registers have the same bit
49 * definitions and are only defined once. */
50#define XPS2_IPIXR_WDT_TOUT 0x00000001 /* Watchdog Timeout Interrupt */
51#define XPS2_IPIXR_TX_NOACK 0x00000002 /* Transmit No ACK Interrupt */
52#define XPS2_IPIXR_TX_ACK 0x00000004 /* Transmit ACK (Data) Interrupt */
53#define XPS2_IPIXR_RX_OVF 0x00000008 /* Receive Overflow Interrupt */
54#define XPS2_IPIXR_RX_ERR 0x00000010 /* Receive Error Interrupt */
55#define XPS2_IPIXR_RX_FULL 0x00000020 /* Receive Data Interrupt */
56
57/* Mask for all the Transmit Interrupts */
58#define XPS2_IPIXR_TX_ALL (XPS2_IPIXR_TX_NOACK | XPS2_IPIXR_TX_ACK)
59
60/* Mask for all the Receive Interrupts */
61#define XPS2_IPIXR_RX_ALL (XPS2_IPIXR_RX_OVF | XPS2_IPIXR_RX_ERR | \
62 XPS2_IPIXR_RX_FULL)
63
64/* Mask for all the Interrupts */
65#define XPS2_IPIXR_ALL (XPS2_IPIXR_TX_ALL | XPS2_IPIXR_RX_ALL | \
66 XPS2_IPIXR_WDT_TOUT)
67
68/* Global Interrupt Enable mask */
69#define XPS2_GIER_GIE_MASK 0x80000000
70
71struct xps2data {
72 int irq;
73 spinlock_t lock;
74 void __iomem *base_address; /* virt. address of control registers */
75 unsigned int flags;
76 struct serio *serio; /* serio */
77 struct device *dev;
78};
79
80/************************************/
81/* XPS PS/2 data transmission calls */
82/************************************/
83
84/**
85 * xps2_recv() - attempts to receive a byte from the PS/2 port.
86 * @drvdata: pointer to ps2 device private data structure
87 * @byte: address where the read data will be copied
88 *
89 * If there is any data available in the PS/2 receiver, this functions reads
90 * the data, otherwise it returns error.
91 */
92static int xps2_recv(struct xps2data *drvdata, u8 *byte)
93{
94 u32 sr;
95 int status = -1;
96
97 /* If there is data available in the PS/2 receiver, read it */
98 sr = in_be32(drvdata->base_address + XPS2_STATUS_OFFSET);
99 if (sr & XPS2_STATUS_RX_FULL) {
100 *byte = in_be32(drvdata->base_address + XPS2_RX_DATA_OFFSET);
101 status = 0;
102 }
103
104 return status;
105}
106
107/*********************/
108/* Interrupt handler */
109/*********************/
110static irqreturn_t xps2_interrupt(int irq, void *dev_id)
111{
112 struct xps2data *drvdata = dev_id;
113 u32 intr_sr;
114 u8 c;
115 int status;
116
117 /* Get the PS/2 interrupts and clear them */
118 intr_sr = in_be32(drvdata->base_address + XPS2_IPISR_OFFSET);
119 out_be32(drvdata->base_address + XPS2_IPISR_OFFSET, intr_sr);
120
121 /* Check which interrupt is active */
122 if (intr_sr & XPS2_IPIXR_RX_OVF)
123 dev_warn(drvdata->dev, "receive overrun error\n");
124
125 if (intr_sr & XPS2_IPIXR_RX_ERR)
126 drvdata->flags |= SERIO_PARITY;
127
128 if (intr_sr & (XPS2_IPIXR_TX_NOACK | XPS2_IPIXR_WDT_TOUT))
129 drvdata->flags |= SERIO_TIMEOUT;
130
131 if (intr_sr & XPS2_IPIXR_RX_FULL) {
132 status = xps2_recv(drvdata, &c);
133
134 /* Error, if a byte is not received */
135 if (status) {
136 dev_err(drvdata->dev,
137 "wrong rcvd byte count (%d)\n", status);
138 } else {
139 serio_interrupt(drvdata->serio, c, drvdata->flags);
140 drvdata->flags = 0;
141 }
142 }
143
144 return IRQ_HANDLED;
145}
146
147/*******************/
148/* serio callbacks */
149/*******************/
150
151/**
152 * sxps2_write() - sends a byte out through the PS/2 port.
153 * @pserio: pointer to the serio structure of the PS/2 port
154 * @c: data that needs to be written to the PS/2 port
155 *
156 * This function checks if the PS/2 transmitter is empty and sends a byte.
157 * Otherwise it returns error. Transmission fails only when nothing is connected
158 * to the PS/2 port. Thats why, we do not try to resend the data in case of a
159 * failure.
160 */
161static int sxps2_write(struct serio *pserio, unsigned char c)
162{
163 struct xps2data *drvdata = pserio->port_data;
164 unsigned long flags;
165 u32 sr;
166 int status = -1;
167
168 spin_lock_irqsave(&drvdata->lock, flags);
169
170 /* If the PS/2 transmitter is empty send a byte of data */
171 sr = in_be32(drvdata->base_address + XPS2_STATUS_OFFSET);
172 if (!(sr & XPS2_STATUS_TX_FULL)) {
173 out_be32(drvdata->base_address + XPS2_TX_DATA_OFFSET, c);
174 status = 0;
175 }
176
177 spin_unlock_irqrestore(&drvdata->lock, flags);
178
179 return status;
180}
181
182/**
183 * sxps2_open() - called when a port is opened by the higher layer.
184 * @pserio: pointer to the serio structure of the PS/2 device
185 *
186 * This function requests irq and enables interrupts for the PS/2 device.
187 */
188static int sxps2_open(struct serio *pserio)
189{
190 struct xps2data *drvdata = pserio->port_data;
191 int error;
192 u8 c;
193
194 error = request_irq(drvdata->irq, &xps2_interrupt, 0,
195 DRIVER_NAME, drvdata);
196 if (error) {
197 dev_err(drvdata->dev,
198 "Couldn't allocate interrupt %d\n", drvdata->irq);
199 return error;
200 }
201
202 /* start reception by enabling the interrupts */
203 out_be32(drvdata->base_address + XPS2_GIER_OFFSET, XPS2_GIER_GIE_MASK);
204 out_be32(drvdata->base_address + XPS2_IPIER_OFFSET, XPS2_IPIXR_RX_ALL);
205 (void)xps2_recv(drvdata, &c);
206
207 return 0; /* success */
208}
209
210/**
211 * sxps2_close() - frees the interrupt.
212 * @pserio: pointer to the serio structure of the PS/2 device
213 *
214 * This function frees the irq and disables interrupts for the PS/2 device.
215 */
216static void sxps2_close(struct serio *pserio)
217{
218 struct xps2data *drvdata = pserio->port_data;
219
220 /* Disable the PS2 interrupts */
221 out_be32(drvdata->base_address + XPS2_GIER_OFFSET, 0x00);
222 out_be32(drvdata->base_address + XPS2_IPIER_OFFSET, 0x00);
223 free_irq(drvdata->irq, drvdata);
224}
225
226/**
227 * xps2_of_probe - probe method for the PS/2 device.
228 * @of_dev: pointer to OF device structure
229 * @match: pointer to the structure used for matching a device
230 *
231 * This function probes the PS/2 device in the device tree.
232 * It initializes the driver data structure and the hardware.
233 * It returns 0, if the driver is bound to the PS/2 device, or a negative
234 * value if there is an error.
235 */
236static int __devinit xps2_of_probe(struct platform_device *ofdev)
237{
238 struct resource r_irq; /* Interrupt resources */
239 struct resource r_mem; /* IO mem resources */
240 struct xps2data *drvdata;
241 struct serio *serio;
242 struct device *dev = &ofdev->dev;
243 resource_size_t remap_size, phys_addr;
244 int error;
245
246 dev_info(dev, "Device Tree Probing \'%s\'\n",
247 ofdev->dev.of_node->name);
248
249 /* Get iospace for the device */
250 error = of_address_to_resource(ofdev->dev.of_node, 0, &r_mem);
251 if (error) {
252 dev_err(dev, "invalid address\n");
253 return error;
254 }
255
256 /* Get IRQ for the device */
257 if (!of_irq_to_resource(ofdev->dev.of_node, 0, &r_irq)) {
258 dev_err(dev, "no IRQ found\n");
259 return -ENODEV;
260 }
261
262 drvdata = kzalloc(sizeof(struct xps2data), GFP_KERNEL);
263 serio = kzalloc(sizeof(struct serio), GFP_KERNEL);
264 if (!drvdata || !serio) {
265 error = -ENOMEM;
266 goto failed1;
267 }
268
269 spin_lock_init(&drvdata->lock);
270 drvdata->irq = r_irq.start;
271 drvdata->serio = serio;
272 drvdata->dev = dev;
273
274 phys_addr = r_mem.start;
275 remap_size = resource_size(&r_mem);
276 if (!request_mem_region(phys_addr, remap_size, DRIVER_NAME)) {
277 dev_err(dev, "Couldn't lock memory region at 0x%08llX\n",
278 (unsigned long long)phys_addr);
279 error = -EBUSY;
280 goto failed1;
281 }
282
283 /* Fill in configuration data and add them to the list */
284 drvdata->base_address = ioremap(phys_addr, remap_size);
285 if (drvdata->base_address == NULL) {
286 dev_err(dev, "Couldn't ioremap memory at 0x%08llX\n",
287 (unsigned long long)phys_addr);
288 error = -EFAULT;
289 goto failed2;
290 }
291
292 /* Disable all the interrupts, just in case */
293 out_be32(drvdata->base_address + XPS2_IPIER_OFFSET, 0);
294
295 /* Reset the PS2 device and abort any current transaction, to make sure
296 * we have the PS2 in a good state */
297 out_be32(drvdata->base_address + XPS2_SRST_OFFSET, XPS2_SRST_RESET);
298
299 dev_info(dev, "Xilinx PS2 at 0x%08llX mapped to 0x%p, irq=%d\n",
300 (unsigned long long)phys_addr, drvdata->base_address,
301 drvdata->irq);
302
303 serio->id.type = SERIO_8042;
304 serio->write = sxps2_write;
305 serio->open = sxps2_open;
306 serio->close = sxps2_close;
307 serio->port_data = drvdata;
308 serio->dev.parent = dev;
309 snprintf(serio->name, sizeof(serio->name),
310 "Xilinx XPS PS/2 at %08llX", (unsigned long long)phys_addr);
311 snprintf(serio->phys, sizeof(serio->phys),
312 "xilinxps2/serio at %08llX", (unsigned long long)phys_addr);
313
314 serio_register_port(serio);
315
316 platform_set_drvdata(ofdev, drvdata);
317 return 0; /* success */
318
319failed2:
320 release_mem_region(phys_addr, remap_size);
321failed1:
322 kfree(serio);
323 kfree(drvdata);
324
325 return error;
326}
327
328/**
329 * xps2_of_remove - unbinds the driver from the PS/2 device.
330 * @of_dev: pointer to OF device structure
331 *
332 * This function is called if a device is physically removed from the system or
333 * if the driver module is being unloaded. It frees any resources allocated to
334 * the device.
335 */
336static int __devexit xps2_of_remove(struct platform_device *of_dev)
337{
338 struct xps2data *drvdata = platform_get_drvdata(of_dev);
339 struct resource r_mem; /* IO mem resources */
340
341 serio_unregister_port(drvdata->serio);
342 iounmap(drvdata->base_address);
343
344 /* Get iospace of the device */
345 if (of_address_to_resource(of_dev->dev.of_node, 0, &r_mem))
346 dev_err(drvdata->dev, "invalid address\n");
347 else
348 release_mem_region(r_mem.start, resource_size(&r_mem));
349
350 kfree(drvdata);
351
352 platform_set_drvdata(of_dev, NULL);
353
354 return 0;
355}
356
357/* Match table for of_platform binding */
358static const struct of_device_id xps2_of_match[] __devinitconst = {
359 { .compatible = "xlnx,xps-ps2-1.00.a", },
360 { /* end of list */ },
361};
362MODULE_DEVICE_TABLE(of, xps2_of_match);
363
364static struct platform_driver xps2_of_driver = {
365 .driver = {
366 .name = DRIVER_NAME,
367 .owner = THIS_MODULE,
368 .of_match_table = xps2_of_match,
369 },
370 .probe = xps2_of_probe,
371 .remove = __devexit_p(xps2_of_remove),
372};
373module_platform_driver(xps2_of_driver);
374
375MODULE_AUTHOR("Xilinx, Inc.");
376MODULE_DESCRIPTION("Xilinx XPS PS/2 driver");
377MODULE_LICENSE("GPL");
378