Linux Audio

Check our new training course

Loading...
v6.8
   1# SPDX-License-Identifier: GPL-2.0
   2VERSION = 6
   3PATCHLEVEL = 8
   4SUBLEVEL = 0
   5EXTRAVERSION =
   6NAME = Hurr durr I'ma ninja sloth
   7
   8# *DOCUMENTATION*
   9# To see a list of typical targets execute "make help"
  10# More info can be located in ./README
  11# Comments in this file are targeted only to the developer, do not
  12# expect to learn how to build the kernel reading this file.
  13
  14ifeq ($(filter undefine,$(.FEATURES)),)
  15$(error GNU Make >= 3.82 is required. Your Make version is $(MAKE_VERSION))
  16endif
  17
  18$(if $(filter __%, $(MAKECMDGOALS)), \
  19	$(error targets prefixed with '__' are only for internal use))
  20
  21# That's our default target when none is given on the command line
  22PHONY := __all
  23__all:
 
 
  24
  25# We are using a recursive build, so we need to do a little thinking
  26# to get the ordering right.
  27#
  28# Most importantly: sub-Makefiles should only ever modify files in
  29# their own directory. If in some directory we have a dependency on
  30# a file in another dir (which doesn't happen often, but it's often
  31# unavoidable when linking the built-in.a targets which finally
  32# turn into vmlinux), we will call a sub make in that other dir, and
  33# after that we are sure that everything which is in that other dir
  34# is now up to date.
  35#
  36# The only cases where we need to modify files which have global
  37# effects are thus separated out and done before the recursive
  38# descending is started. They are now explicitly listed as the
  39# prepare rule.
  40
  41this-makefile := $(lastword $(MAKEFILE_LIST))
  42export abs_srctree := $(realpath $(dir $(this-makefile)))
  43export abs_objtree := $(CURDIR)
  44
  45ifneq ($(sub_make_done),1)
  46
  47# Do not use make's built-in rules and variables
  48# (this increases performance and avoids hard-to-debug behaviour)
  49MAKEFLAGS += -rR
  50
  51# Avoid funny character set dependencies
  52unexport LC_ALL
  53LC_COLLATE=C
  54LC_NUMERIC=C
  55export LC_COLLATE LC_NUMERIC
  56
  57# Avoid interference with shell env settings
  58unexport GREP_OPTIONS
  59
  60# Beautify output
  61# ---------------------------------------------------------------------------
  62#
  63# Most of build commands in Kbuild start with "cmd_". You can optionally define
  64# "quiet_cmd_*". If defined, the short log is printed. Otherwise, no log from
  65# that command is printed by default.
  66#
  67# e.g.)
  68#    quiet_cmd_depmod = DEPMOD  $(MODLIB)
  69#          cmd_depmod = $(srctree)/scripts/depmod.sh $(DEPMOD) $(KERNELRELEASE)
  70#
  71# A simple variant is to prefix commands with $(Q) - that's useful
  72# for commands that shall be hidden in non-verbose mode.
  73#
  74#    $(Q)$(MAKE) $(build)=scripts/basic
  75#
  76# If KBUILD_VERBOSE contains 1, the whole command is echoed.
  77# If KBUILD_VERBOSE contains 2, the reason for rebuilding is printed.
  78#
  79# To put more focus on warnings, be less verbose as default
  80# Use 'make V=1' to see the full commands
  81
  82ifeq ("$(origin V)", "command line")
  83  KBUILD_VERBOSE = $(V)
  84endif
  85
  86quiet = quiet_
  87Q = @
  88
  89ifneq ($(findstring 1, $(KBUILD_VERBOSE)),)
  90  quiet =
  91  Q =
  92endif
  93
  94# If the user is running make -s (silent mode), suppress echoing of
  95# commands
  96# make-4.0 (and later) keep single letter options in the 1st word of MAKEFLAGS.
  97
  98ifeq ($(filter 3.%,$(MAKE_VERSION)),)
  99short-opts := $(firstword -$(MAKEFLAGS))
 100else
 101short-opts := $(filter-out --%,$(MAKEFLAGS))
 102endif
 103
 104ifneq ($(findstring s,$(short-opts)),)
 105quiet=silent_
 106override KBUILD_VERBOSE :=
 107endif
 108
 109export quiet Q KBUILD_VERBOSE
 110
 111# Call a source code checker (by default, "sparse") as part of the
 112# C compilation.
 113#
 114# Use 'make C=1' to enable checking of only re-compiled files.
 115# Use 'make C=2' to enable checking of *all* source files, regardless
 116# of whether they are re-compiled or not.
 117#
 118# See the file "Documentation/dev-tools/sparse.rst" for more details,
 119# including where to get the "sparse" utility.
 120
 121ifeq ("$(origin C)", "command line")
 122  KBUILD_CHECKSRC = $(C)
 123endif
 124ifndef KBUILD_CHECKSRC
 125  KBUILD_CHECKSRC = 0
 126endif
 127
 128export KBUILD_CHECKSRC
 129
 130# Enable "clippy" (a linter) as part of the Rust compilation.
 131#
 132# Use 'make CLIPPY=1' to enable it.
 133ifeq ("$(origin CLIPPY)", "command line")
 134  KBUILD_CLIPPY := $(CLIPPY)
 135endif
 136
 137export KBUILD_CLIPPY
 138
 139# Use make M=dir or set the environment variable KBUILD_EXTMOD to specify the
 140# directory of external module to build. Setting M= takes precedence.
 141ifeq ("$(origin M)", "command line")
 142  KBUILD_EXTMOD := $(M)
 143endif
 144
 145$(if $(word 2, $(KBUILD_EXTMOD)), \
 146	$(error building multiple external modules is not supported))
 147
 148$(foreach x, % :, $(if $(findstring $x, $(KBUILD_EXTMOD)), \
 149	$(error module directory path cannot contain '$x')))
 150
 151# Remove trailing slashes
 152ifneq ($(filter %/, $(KBUILD_EXTMOD)),)
 153KBUILD_EXTMOD := $(shell dirname $(KBUILD_EXTMOD).)
 154endif
 155
 156export KBUILD_EXTMOD
 157
 158# backward compatibility
 159KBUILD_EXTRA_WARN ?= $(KBUILD_ENABLE_EXTRA_GCC_CHECKS)
 160
 161ifeq ("$(origin W)", "command line")
 162  KBUILD_EXTRA_WARN := $(W)
 163endif
 164
 165export KBUILD_EXTRA_WARN
 166
 167# Kbuild will save output files in the current working directory.
 168# This does not need to match to the root of the kernel source tree.
 169#
 170# For example, you can do this:
 171#
 172#  cd /dir/to/store/output/files; make -f /dir/to/kernel/source/Makefile
 173#
 174# If you want to save output files in a different location, there are
 175# two syntaxes to specify it.
 176#
 177# 1) O=
 178# Use "make O=dir/to/store/output/files/"
 179#
 180# 2) Set KBUILD_OUTPUT
 181# Set the environment variable KBUILD_OUTPUT to point to the output directory.
 182# export KBUILD_OUTPUT=dir/to/store/output/files/; make
 
 
 183#
 184# The O= assignment takes precedence over the KBUILD_OUTPUT environment
 185# variable.
 186
 187# Do we want to change the working directory?
 188ifeq ("$(origin O)", "command line")
 189  KBUILD_OUTPUT := $(O)
 190endif
 191
 192ifneq ($(KBUILD_OUTPUT),)
 193# $(realpath ...) gets empty if the path does not exist. Run 'mkdir -p' first.
 194$(shell mkdir -p "$(KBUILD_OUTPUT)")
 195# $(realpath ...) resolves symlinks
 196abs_objtree := $(realpath $(KBUILD_OUTPUT))
 197$(if $(abs_objtree),,$(error failed to create output directory "$(KBUILD_OUTPUT)"))
 198endif # ifneq ($(KBUILD_OUTPUT),)
 199
 200ifneq ($(words $(subst :, ,$(abs_srctree))), 1)
 201$(error source directory cannot contain spaces or colons)
 202endif
 203
 204ifneq ($(filter 3.%,$(MAKE_VERSION)),)
 205# 'MAKEFLAGS += -rR' does not immediately become effective for GNU Make 3.x
 206# We need to invoke sub-make to avoid implicit rules in the top Makefile.
 207need-sub-make := 1
 208# Cancel implicit rules for this Makefile.
 209$(this-makefile): ;
 210endif
 211
 212export sub_make_done := 1
 
 
 213
 214endif # sub_make_done
 215
 216ifeq ($(abs_objtree),$(CURDIR))
 217# Suppress "Entering directory ..." if we are at the final work directory.
 218no-print-directory := --no-print-directory
 219else
 220# Recursion to show "Entering directory ..."
 221need-sub-make := 1
 222endif
 223
 224ifeq ($(filter --no-print-directory, $(MAKEFLAGS)),)
 225# If --no-print-directory is unset, recurse once again to set it.
 226# You may end up recursing into __sub-make twice. This is needed due to the
 227# behavior change in GNU Make 4.4.1.
 228need-sub-make := 1
 229endif
 230
 231ifeq ($(need-sub-make),1)
 232
 233PHONY += $(MAKECMDGOALS) __sub-make
 234
 235$(filter-out $(this-makefile), $(MAKECMDGOALS)) __all: __sub-make
 236	@:
 237
 
 238# Invoke a second make in the output directory, passing relevant variables
 239__sub-make:
 240	$(Q)$(MAKE) $(no-print-directory) -C $(abs_objtree) \
 241	-f $(abs_srctree)/Makefile $(MAKECMDGOALS)
 
 
 
 
 
 
 
 
 
 
 
 
 
 242
 243else # need-sub-make
 
 
 
 244
 245# We process the rest of the Makefile if this is the final invocation of make
 
 246
 247ifeq ($(abs_srctree),$(abs_objtree))
 248        # building in the source tree
 249        srctree := .
 250	building_out_of_srctree :=
 251else
 252        ifeq ($(abs_srctree)/,$(dir $(abs_objtree)))
 253                # building in a subdirectory of the source tree
 254                srctree := ..
 255        else
 256                srctree := $(abs_srctree)
 257        endif
 258	building_out_of_srctree := 1
 259endif
 260
 261ifneq ($(KBUILD_ABS_SRCTREE),)
 262srctree := $(abs_srctree)
 263endif
 264
 265objtree		:= .
 266VPATH		:= $(srctree)
 267
 268export building_out_of_srctree srctree objtree VPATH
 269
 270# To make sure we do not include .config for any of the *config targets
 271# catch them early, and hand them over to scripts/kconfig/Makefile
 272# It is allowed to specify more targets when calling make, including
 273# mixing *config targets and build targets.
 274# For example 'make oldconfig all'.
 275# Detect when mixed targets is specified, and make a second invocation
 276# of make so .config is not included in this case either (for *config).
 277
 278version_h := include/generated/uapi/linux/version.h
 279
 280clean-targets := %clean mrproper cleandocs
 281no-dot-config-targets := $(clean-targets) \
 282			 cscope gtags TAGS tags help% %docs check% coccicheck \
 283			 $(version_h) headers headers_% archheaders archscripts \
 284			 %asm-generic kernelversion %src-pkg dt_binding_check \
 285			 outputmakefile rustavailable rustfmt rustfmtcheck
 286no-sync-config-targets := $(no-dot-config-targets) %install modules_sign kernelrelease \
 287			  image_name
 288single-targets := %.a %.i %.ko %.lds %.ll %.lst %.mod %.o %.rsi %.s %.symtypes %/
 289
 290config-build	:=
 291mixed-build	:=
 292need-config	:= 1
 293may-sync-config	:= 1
 294single-build	:=
 295
 296ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),)
 297    ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),)
 298		need-config :=
 299    endif
 300endif
 301
 302ifneq ($(filter $(no-sync-config-targets), $(MAKECMDGOALS)),)
 303    ifeq ($(filter-out $(no-sync-config-targets), $(MAKECMDGOALS)),)
 304		may-sync-config :=
 305    endif
 306endif
 307
 308need-compiler := $(may-sync-config)
 309
 310ifneq ($(KBUILD_EXTMOD),)
 311	may-sync-config :=
 312endif
 313
 314ifeq ($(KBUILD_EXTMOD),)
 315        ifneq ($(filter %config,$(MAKECMDGOALS)),)
 316		config-build := 1
 317                ifneq ($(words $(MAKECMDGOALS)),1)
 318			mixed-build := 1
 319                endif
 320        endif
 321endif
 322
 323# We cannot build single targets and the others at the same time
 324ifneq ($(filter $(single-targets), $(MAKECMDGOALS)),)
 325	single-build := 1
 326    ifneq ($(filter-out $(single-targets), $(MAKECMDGOALS)),)
 327		mixed-build := 1
 328    endif
 329endif
 330
 331# For "make -j clean all", "make -j mrproper defconfig all", etc.
 332ifneq ($(filter $(clean-targets),$(MAKECMDGOALS)),)
 333        ifneq ($(filter-out $(clean-targets),$(MAKECMDGOALS)),)
 334		mixed-build := 1
 335        endif
 336endif
 337
 338# install and modules_install need also be processed one by one
 339ifneq ($(filter install,$(MAKECMDGOALS)),)
 340        ifneq ($(filter modules_install,$(MAKECMDGOALS)),)
 341		mixed-build := 1
 342        endif
 343endif
 344
 345ifdef mixed-build
 346# ===========================================================================
 347# We're called with mixed targets (*config and build targets).
 348# Handle them one by one.
 349
 350PHONY += $(MAKECMDGOALS) __build_one_by_one
 351
 352$(MAKECMDGOALS): __build_one_by_one
 353	@:
 354
 355__build_one_by_one:
 356	$(Q)set -e; \
 357	for i in $(MAKECMDGOALS); do \
 358		$(MAKE) -f $(srctree)/Makefile $$i; \
 359	done
 360
 361else # !mixed-build
 362
 363include $(srctree)/scripts/Kbuild.include
 364
 365# Read KERNELRELEASE from include/config/kernel.release (if it exists)
 366KERNELRELEASE = $(call read-file, include/config/kernel.release)
 367KERNELVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
 368export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION
 
 369
 370include $(srctree)/scripts/subarch.include
 
 
 
 
 371
 372# Cross compiling and selecting different set of gcc/bin-utils
 373# ---------------------------------------------------------------------------
 374#
 375# When performing cross compilation for other architectures ARCH shall be set
 376# to the target architecture. (See arch/* for the possibilities).
 377# ARCH can be set during invocation of make:
 378# make ARCH=arm64
 379# Another way is to have ARCH set in the environment.
 380# The default ARCH is the host where make is executed.
 381
 382# CROSS_COMPILE specify the prefix used for all executables used
 383# during compilation. Only gcc and related bin-utils executables
 384# are prefixed with $(CROSS_COMPILE).
 385# CROSS_COMPILE can be set on the command line
 386# make CROSS_COMPILE=aarch64-linux-gnu-
 387# Alternatively CROSS_COMPILE can be set in the environment.
 
 
 388# Default value for CROSS_COMPILE is not to prefix executables
 389# Note: Some architectures assign CROSS_COMPILE in their arch/*/Makefile
 
 390ARCH		?= $(SUBARCH)
 
 391
 392# Architecture as present in compile.h
 393UTS_MACHINE 	:= $(ARCH)
 394SRCARCH 	:= $(ARCH)
 395
 396# Additional ARCH settings for x86
 397ifeq ($(ARCH),i386)
 398        SRCARCH := x86
 399endif
 400ifeq ($(ARCH),x86_64)
 401        SRCARCH := x86
 402endif
 403
 404# Additional ARCH settings for sparc
 405ifeq ($(ARCH),sparc32)
 406       SRCARCH := sparc
 407endif
 408ifeq ($(ARCH),sparc64)
 409       SRCARCH := sparc
 410endif
 411
 412# Additional ARCH settings for parisc
 413ifeq ($(ARCH),parisc64)
 414       SRCARCH := parisc
 415endif
 416
 417export cross_compiling :=
 418ifneq ($(SRCARCH),$(SUBARCH))
 419cross_compiling := 1
 420endif
 
 
 
 
 
 
 421
 422KCONFIG_CONFIG	?= .config
 423export KCONFIG_CONFIG
 424
 425# SHELL used by kbuild
 426CONFIG_SHELL := sh
 
 
 
 
 
 
 
 
 
 
 
 
 
 427
 428HOST_LFS_CFLAGS := $(shell getconf LFS_CFLAGS 2>/dev/null)
 429HOST_LFS_LDFLAGS := $(shell getconf LFS_LDFLAGS 2>/dev/null)
 430HOST_LFS_LIBS := $(shell getconf LFS_LIBS 2>/dev/null)
 
 431
 432ifneq ($(LLVM),)
 433ifneq ($(filter %/,$(LLVM)),)
 434LLVM_PREFIX := $(LLVM)
 435else ifneq ($(filter -%,$(LLVM)),)
 436LLVM_SUFFIX := $(LLVM)
 
 
 
 
 
 
 
 
 
 437endif
 438
 439HOSTCC	= $(LLVM_PREFIX)clang$(LLVM_SUFFIX)
 440HOSTCXX	= $(LLVM_PREFIX)clang++$(LLVM_SUFFIX)
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 441else
 442HOSTCC	= gcc
 443HOSTCXX	= g++
 
 
 
 
 
 
 
 444endif
 445HOSTRUSTC = rustc
 446HOSTPKG_CONFIG	= pkg-config
 447
 448KBUILD_USERHOSTCFLAGS := -Wall -Wmissing-prototypes -Wstrict-prototypes \
 449			 -O2 -fomit-frame-pointer -std=gnu11
 450KBUILD_USERCFLAGS  := $(KBUILD_USERHOSTCFLAGS) $(USERCFLAGS)
 451KBUILD_USERLDFLAGS := $(USERLDFLAGS)
 452
 453# These flags apply to all Rust code in the tree, including the kernel and
 454# host programs.
 455export rust_common_flags := --edition=2021 \
 456			    -Zbinary_dep_depinfo=y \
 457			    -Dunsafe_op_in_unsafe_fn -Drust_2018_idioms \
 458			    -Dunreachable_pub -Dnon_ascii_idents \
 459			    -Wmissing_docs \
 460			    -Drustdoc::missing_crate_level_docs \
 461			    -Dclippy::correctness -Dclippy::style \
 462			    -Dclippy::suspicious -Dclippy::complexity \
 463			    -Dclippy::perf \
 464			    -Dclippy::let_unit_value -Dclippy::mut_mut \
 465			    -Dclippy::needless_bitwise_bool \
 466			    -Dclippy::needless_continue \
 467			    -Dclippy::no_mangle_with_rust_abi \
 468			    -Wclippy::dbg_macro
 469
 470KBUILD_HOSTCFLAGS   := $(KBUILD_USERHOSTCFLAGS) $(HOST_LFS_CFLAGS) $(HOSTCFLAGS)
 471KBUILD_HOSTCXXFLAGS := -Wall -O2 $(HOST_LFS_CFLAGS) $(HOSTCXXFLAGS)
 472KBUILD_HOSTRUSTFLAGS := $(rust_common_flags) -O -Cstrip=debuginfo \
 473			-Zallow-features= $(HOSTRUSTFLAGS)
 474KBUILD_HOSTLDFLAGS  := $(HOST_LFS_LDFLAGS) $(HOSTLDFLAGS)
 475KBUILD_HOSTLDLIBS   := $(HOST_LFS_LIBS) $(HOSTLDLIBS)
 476
 477# Make variables (CC, etc...)
 478CPP		= $(CC) -E
 479ifneq ($(LLVM),)
 480CC		= $(LLVM_PREFIX)clang$(LLVM_SUFFIX)
 481LD		= $(LLVM_PREFIX)ld.lld$(LLVM_SUFFIX)
 482AR		= $(LLVM_PREFIX)llvm-ar$(LLVM_SUFFIX)
 483NM		= $(LLVM_PREFIX)llvm-nm$(LLVM_SUFFIX)
 484OBJCOPY		= $(LLVM_PREFIX)llvm-objcopy$(LLVM_SUFFIX)
 485OBJDUMP		= $(LLVM_PREFIX)llvm-objdump$(LLVM_SUFFIX)
 486READELF		= $(LLVM_PREFIX)llvm-readelf$(LLVM_SUFFIX)
 487STRIP		= $(LLVM_PREFIX)llvm-strip$(LLVM_SUFFIX)
 488else
 489CC		= $(CROSS_COMPILE)gcc
 490LD		= $(CROSS_COMPILE)ld
 
 
 491AR		= $(CROSS_COMPILE)ar
 492NM		= $(CROSS_COMPILE)nm
 
 493OBJCOPY		= $(CROSS_COMPILE)objcopy
 494OBJDUMP		= $(CROSS_COMPILE)objdump
 495READELF		= $(CROSS_COMPILE)readelf
 496STRIP		= $(CROSS_COMPILE)strip
 497endif
 498RUSTC		= rustc
 499RUSTDOC		= rustdoc
 500RUSTFMT		= rustfmt
 501CLIPPY_DRIVER	= clippy-driver
 502BINDGEN		= bindgen
 503CARGO		= cargo
 504PAHOLE		= pahole
 505RESOLVE_BTFIDS	= $(objtree)/tools/bpf/resolve_btfids/resolve_btfids
 506LEX		= flex
 507YACC		= bison
 508AWK		= awk
 
 509INSTALLKERNEL  := installkernel
 
 510PERL		= perl
 511PYTHON3		= python3
 512CHECK		= sparse
 513BASH		= bash
 514KGZIP		= gzip
 515KBZIP2		= bzip2
 516KLZOP		= lzop
 517LZMA		= lzma
 518LZ4		= lz4c
 519XZ		= xz
 520ZSTD		= zstd
 521
 522CHECKFLAGS     := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \
 523		  -Wbitwise -Wno-return-void -Wno-unknown-attribute $(CF)
 524NOSTDINC_FLAGS :=
 525CFLAGS_MODULE   =
 526RUSTFLAGS_MODULE =
 527AFLAGS_MODULE   =
 528LDFLAGS_MODULE  =
 529CFLAGS_KERNEL	=
 530RUSTFLAGS_KERNEL =
 531AFLAGS_KERNEL	=
 532LDFLAGS_vmlinux =
 533
 534# Use USERINCLUDE when you must reference the UAPI directories only.
 535USERINCLUDE    := \
 536		-I$(srctree)/arch/$(SRCARCH)/include/uapi \
 537		-I$(objtree)/arch/$(SRCARCH)/include/generated/uapi \
 538		-I$(srctree)/include/uapi \
 539		-I$(objtree)/include/generated/uapi \
 540                -include $(srctree)/include/linux/compiler-version.h \
 541                -include $(srctree)/include/linux/kconfig.h
 542
 543# Use LINUXINCLUDE when you must reference the include directory.
 544# Needed to be compatible with the O= option
 545LINUXINCLUDE    := \
 546		-I$(srctree)/arch/$(SRCARCH)/include \
 547		-I$(objtree)/arch/$(SRCARCH)/include/generated \
 548		$(if $(building_out_of_srctree),-I$(srctree)/include) \
 549		-I$(objtree)/include \
 550		$(USERINCLUDE)
 551
 552KBUILD_AFLAGS   := -D__ASSEMBLY__ -fno-PIE
 553
 554KBUILD_CFLAGS :=
 555KBUILD_CFLAGS += -std=gnu11
 556KBUILD_CFLAGS += -fshort-wchar
 557KBUILD_CFLAGS += -funsigned-char
 558KBUILD_CFLAGS += -fno-common
 559KBUILD_CFLAGS += -fno-PIE
 560KBUILD_CFLAGS += -fno-strict-aliasing
 561
 562KBUILD_CPPFLAGS := -D__KERNEL__
 563KBUILD_RUSTFLAGS := $(rust_common_flags) \
 564		    --target=$(objtree)/scripts/target.json \
 565		    -Cpanic=abort -Cembed-bitcode=n -Clto=n \
 566		    -Cforce-unwind-tables=n -Ccodegen-units=1 \
 567		    -Csymbol-mangling-version=v0 \
 568		    -Crelocation-model=static \
 569		    -Zfunction-sections=n \
 570		    -Dclippy::float_arithmetic
 571
 
 
 
 
 
 572KBUILD_AFLAGS_KERNEL :=
 573KBUILD_CFLAGS_KERNEL :=
 574KBUILD_RUSTFLAGS_KERNEL :=
 575KBUILD_AFLAGS_MODULE  := -DMODULE
 576KBUILD_CFLAGS_MODULE  := -DMODULE
 577KBUILD_RUSTFLAGS_MODULE := --cfg MODULE
 578KBUILD_LDFLAGS_MODULE :=
 579KBUILD_LDFLAGS :=
 580CLANG_FLAGS :=
 581
 582ifeq ($(KBUILD_CLIPPY),1)
 583	RUSTC_OR_CLIPPY_QUIET := CLIPPY
 584	RUSTC_OR_CLIPPY = $(CLIPPY_DRIVER)
 585else
 586	RUSTC_OR_CLIPPY_QUIET := RUSTC
 587	RUSTC_OR_CLIPPY = $(RUSTC)
 588endif
 589
 590ifdef RUST_LIB_SRC
 591	export RUST_LIB_SRC
 592endif
 593
 594# Allows the usage of unstable features in stable compilers.
 595export RUSTC_BOOTSTRAP := 1
 
 596
 597export ARCH SRCARCH CONFIG_SHELL BASH HOSTCC KBUILD_HOSTCFLAGS CROSS_COMPILE LD CC HOSTPKG_CONFIG
 598export RUSTC RUSTDOC RUSTFMT RUSTC_OR_CLIPPY_QUIET RUSTC_OR_CLIPPY BINDGEN CARGO
 599export HOSTRUSTC KBUILD_HOSTRUSTFLAGS
 600export CPP AR NM STRIP OBJCOPY OBJDUMP READELF PAHOLE RESOLVE_BTFIDS LEX YACC AWK INSTALLKERNEL
 601export PERL PYTHON3 CHECK CHECKFLAGS MAKE UTS_MACHINE HOSTCXX
 602export KGZIP KBZIP2 KLZOP LZMA LZ4 XZ ZSTD
 603export KBUILD_HOSTCXXFLAGS KBUILD_HOSTLDFLAGS KBUILD_HOSTLDLIBS LDFLAGS_MODULE
 604export KBUILD_USERCFLAGS KBUILD_USERLDFLAGS
 605
 606export KBUILD_CPPFLAGS NOSTDINC_FLAGS LINUXINCLUDE OBJCOPYFLAGS KBUILD_LDFLAGS
 607export KBUILD_CFLAGS CFLAGS_KERNEL CFLAGS_MODULE
 608export KBUILD_RUSTFLAGS RUSTFLAGS_KERNEL RUSTFLAGS_MODULE
 609export KBUILD_AFLAGS AFLAGS_KERNEL AFLAGS_MODULE
 610export KBUILD_AFLAGS_MODULE KBUILD_CFLAGS_MODULE KBUILD_RUSTFLAGS_MODULE KBUILD_LDFLAGS_MODULE
 611export KBUILD_AFLAGS_KERNEL KBUILD_CFLAGS_KERNEL KBUILD_RUSTFLAGS_KERNEL
 
 
 
 
 
 
 612
 613# Files to ignore in find ... statements
 614
 615export RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o    \
 616			  -name CVS -o -name .pc -o -name .hg -o -name .git \) \
 617			  -prune -o
 
 618
 619# ===========================================================================
 620# Rules shared between *config targets and build targets
 621
 622# Basic helpers built in scripts/basic
 623PHONY += scripts_basic
 624scripts_basic:
 625	$(Q)$(MAKE) $(build)=scripts/basic
 
 
 
 
 626
 627PHONY += outputmakefile
 628ifdef building_out_of_srctree
 629# Before starting out-of-tree build, make sure the source tree is clean.
 630# outputmakefile generates a Makefile in the output directory, if using a
 631# separate output directory. This allows convenient use of make in the
 632# output directory.
 633# At the same time when output Makefile generated, generate .gitignore to
 634# ignore whole output directory
 635
 636quiet_cmd_makefile = GEN     Makefile
 637      cmd_makefile = { \
 638	echo "\# Automatically generated by $(srctree)/Makefile: don't edit"; \
 639	echo "include $(srctree)/Makefile"; \
 640	} > Makefile
 641
 642outputmakefile:
 643	@if [ -f $(srctree)/.config -o \
 644		 -d $(srctree)/include/config -o \
 645		 -d $(srctree)/arch/$(SRCARCH)/include/generated ]; then \
 646		echo >&2 "***"; \
 647		echo >&2 "*** The source tree is not clean, please run 'make$(if $(findstring command line, $(origin ARCH)), ARCH=$(ARCH)) mrproper'"; \
 648		echo >&2 "*** in $(abs_srctree)";\
 649		echo >&2 "***"; \
 650		false; \
 651	fi
 652	$(Q)ln -fsn $(srctree) source
 653	$(call cmd,makefile)
 654	$(Q)test -e .gitignore || \
 655	{ echo "# this is build directory, ignore it"; echo "*"; } > .gitignore
 656endif
 657
 658# The expansion should be delayed until arch/$(SRCARCH)/Makefile is included.
 659# Some architectures define CROSS_COMPILE in arch/$(SRCARCH)/Makefile.
 660# CC_VERSION_TEXT is referenced from Kconfig (so it needs export),
 661# and from include/config/auto.conf.cmd to detect the compiler upgrade.
 662CC_VERSION_TEXT = $(subst $(pound),,$(shell LC_ALL=C $(CC) --version 2>/dev/null | head -n 1))
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 663
 664ifneq ($(findstring clang,$(CC_VERSION_TEXT)),)
 665include $(srctree)/scripts/Makefile.clang
 
 
 666endif
 667
 668# Include this also for config targets because some architectures need
 669# cc-cross-prefix to determine CROSS_COMPILE.
 670ifdef need-compiler
 671include $(srctree)/scripts/Makefile.compiler
 
 
 
 672endif
 673
 674ifdef config-build
 
 
 
 
 
 
 
 
 
 675# ===========================================================================
 676# *config targets only - make sure prerequisites are updated, and descend
 677# in scripts/kconfig to make the *config target
 678
 679# Read arch-specific Makefile to set KBUILD_DEFCONFIG as needed.
 680# KBUILD_DEFCONFIG may point out an alternative default configuration
 681# used for 'make defconfig'
 682include $(srctree)/arch/$(SRCARCH)/Makefile
 683export KBUILD_DEFCONFIG KBUILD_KCONFIG CC_VERSION_TEXT
 684
 685config: outputmakefile scripts_basic FORCE
 
 686	$(Q)$(MAKE) $(build)=scripts/kconfig $@
 687
 688%config: outputmakefile scripts_basic FORCE
 
 689	$(Q)$(MAKE) $(build)=scripts/kconfig $@
 690
 691else #!config-build
 692# ===========================================================================
 693# Build targets only - this includes vmlinux, arch-specific targets, clean
 694# targets and others. In general all targets except *config targets.
 695
 696# If building an external module we do not care about the all: rule
 697# but instead __all depend on modules
 698PHONY += all
 699ifeq ($(KBUILD_EXTMOD),)
 700__all: all
 701else
 702__all: modules
 703endif
 704
 705targets :=
 706
 707# Decide whether to build built-in, modular, or both.
 708# Normally, just do built-in.
 709
 710KBUILD_MODULES :=
 711KBUILD_BUILTIN := 1
 712
 713# If we have only "make modules", don't compile built-in objects.
 714ifeq ($(MAKECMDGOALS),modules)
 715  KBUILD_BUILTIN :=
 716endif
 717
 718# If we have "make <whatever> modules", compile modules
 719# in addition to whatever we do anyway.
 720# Just "make" or "make all" shall build modules as well
 
 
 
 
 721
 722ifneq ($(filter all modules nsdeps %compile_commands.json clang-%,$(MAKECMDGOALS)),)
 723  KBUILD_MODULES := 1
 724endif
 725
 726ifeq ($(MAKECMDGOALS),)
 727  KBUILD_MODULES := 1
 728endif
 729
 730export KBUILD_MODULES KBUILD_BUILTIN
 
 
 
 
 
 
 
 
 
 
 
 
 
 731
 732ifdef need-config
 733include include/config/auto.conf
 734endif
 
 
 
 
 
 735
 736ifeq ($(KBUILD_EXTMOD),)
 737# Objects we will link into vmlinux / subdirs we need to visit
 738core-y		:=
 739drivers-y	:=
 740libs-y		:= lib
 741endif # KBUILD_EXTMOD
 742
 
 
 
 
 
 743# The all: target is the default when no target is given on the
 744# command line.
 745# This allow a user to issue only 'make' to build a kernel including modules
 746# Defaults to vmlinux, but the arch makefile usually adds further targets
 747all: vmlinux
 748
 749CFLAGS_GCOV	:= -fprofile-arcs -ftest-coverage
 750ifdef CONFIG_CC_IS_GCC
 751CFLAGS_GCOV	+= -fno-tree-loop-im
 752endif
 753export CFLAGS_GCOV
 754
 755# The arch Makefiles can override CC_FLAGS_FTRACE. We may also append it later.
 756ifdef CONFIG_FUNCTION_TRACER
 757  CC_FLAGS_FTRACE := -pg
 758endif
 759
 760include $(srctree)/arch/$(SRCARCH)/Makefile
 761
 762ifdef need-config
 763ifdef may-sync-config
 764# Read in dependencies to all Kconfig* files, make sure to run syncconfig if
 765# changes are detected. This should be included after arch/$(SRCARCH)/Makefile
 766# because some architectures define CROSS_COMPILE there.
 767include include/config/auto.conf.cmd
 768
 769$(KCONFIG_CONFIG):
 770	@echo >&2 '***'
 771	@echo >&2 '*** Configuration file "$@" not found!'
 772	@echo >&2 '***'
 773	@echo >&2 '*** Please run some configurator (e.g. "make oldconfig" or'
 774	@echo >&2 '*** "make menuconfig" or "make xconfig").'
 775	@echo >&2 '***'
 776	@/bin/false
 777
 778# The actual configuration files used during the build are stored in
 779# include/generated/ and include/config/. Update them if .config is newer than
 780# include/config/auto.conf (which mirrors .config).
 781#
 782# This exploits the 'multi-target pattern rule' trick.
 783# The syncconfig should be executed only once to make all the targets.
 784# (Note: use the grouped target '&:' when we bump to GNU Make 4.3)
 785#
 786# Do not use $(call cmd,...) here. That would suppress prompts from syncconfig,
 787# so you cannot notice that Kconfig is waiting for the user input.
 788%/config/auto.conf %/config/auto.conf.cmd %/generated/autoconf.h %/generated/rustc_cfg: $(KCONFIG_CONFIG)
 789	$(Q)$(kecho) "  SYNC    $@"
 790	$(Q)$(MAKE) -f $(srctree)/Makefile syncconfig
 791else # !may-sync-config
 792# External modules and some install targets need include/generated/autoconf.h
 793# and include/config/auto.conf but do not care if they are up-to-date.
 794# Use auto.conf to trigger the test
 795PHONY += include/config/auto.conf
 796
 797include/config/auto.conf:
 798	@test -e include/generated/autoconf.h -a -e $@ || (		\
 799	echo >&2;							\
 800	echo >&2 "  ERROR: Kernel configuration is invalid.";		\
 801	echo >&2 "         include/generated/autoconf.h or $@ are missing.";\
 802	echo >&2 "         Run 'make oldconfig && make prepare' on kernel src to fix it.";	\
 803	echo >&2 ;							\
 804	/bin/false)
 805
 806endif # may-sync-config
 807endif # need-config
 808
 809KBUILD_CFLAGS	+= -fno-delete-null-pointer-checks
 810
 811ifdef CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE
 812KBUILD_CFLAGS += -O2
 813KBUILD_RUSTFLAGS += -Copt-level=2
 814else ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
 815KBUILD_CFLAGS += -Os
 816KBUILD_RUSTFLAGS += -Copt-level=s
 817endif
 818
 819# Always set `debug-assertions` and `overflow-checks` because their default
 820# depends on `opt-level` and `debug-assertions`, respectively.
 821KBUILD_RUSTFLAGS += -Cdebug-assertions=$(if $(CONFIG_RUST_DEBUG_ASSERTIONS),y,n)
 822KBUILD_RUSTFLAGS += -Coverflow-checks=$(if $(CONFIG_RUST_OVERFLOW_CHECKS),y,n)
 823
 824# Tell gcc to never replace conditional load with a non-conditional one
 825ifdef CONFIG_CC_IS_GCC
 826# gcc-10 renamed --param=allow-store-data-races=0 to
 827# -fno-allow-store-data-races.
 828KBUILD_CFLAGS	+= $(call cc-option,--param=allow-store-data-races=0)
 829KBUILD_CFLAGS	+= $(call cc-option,-fno-allow-store-data-races)
 830endif
 831
 832ifdef CONFIG_READABLE_ASM
 833# Disable optimizations that make assembler listings hard to read.
 834# reorder blocks reorders the control in the function
 835# ipa clone creates specialized cloned functions
 836# partial inlining inlines only parts of functions
 837KBUILD_CFLAGS += -fno-reorder-blocks -fno-ipa-cp-clone -fno-partial-inlining
 
 
 838endif
 839
 840stackp-flags-y                                    := -fno-stack-protector
 841stackp-flags-$(CONFIG_STACKPROTECTOR)             := -fstack-protector
 842stackp-flags-$(CONFIG_STACKPROTECTOR_STRONG)      := -fstack-protector-strong
 843
 844KBUILD_CFLAGS += $(stackp-flags-y)
 
 
 
 845
 846KBUILD_RUSTFLAGS-$(CONFIG_WERROR) += -Dwarnings
 847KBUILD_RUSTFLAGS += $(KBUILD_RUSTFLAGS-y)
 
 848
 849ifdef CONFIG_FRAME_POINTER
 850KBUILD_CFLAGS	+= -fno-omit-frame-pointer -fno-optimize-sibling-calls
 851KBUILD_RUSTFLAGS += -Cforce-frame-pointers=y
 852else
 853# Some targets (ARM with Thumb2, for example), can't be built with frame
 854# pointers.  For those, we don't have FUNCTION_TRACER automatically
 855# select FRAME_POINTER.  However, FUNCTION_TRACER adds -pg, and this is
 856# incompatible with -fomit-frame-pointer with current GCC, so we don't use
 857# -fomit-frame-pointer with FUNCTION_TRACER.
 858# In the Rust target specification, "frame-pointer" is set explicitly
 859# to "may-omit".
 860ifndef CONFIG_FUNCTION_TRACER
 861KBUILD_CFLAGS	+= -fomit-frame-pointer
 862endif
 863endif
 864
 865# Initialize all stack variables with a 0xAA pattern.
 866ifdef CONFIG_INIT_STACK_ALL_PATTERN
 867KBUILD_CFLAGS	+= -ftrivial-auto-var-init=pattern
 868endif
 869
 870# Initialize all stack variables with a zero value.
 871ifdef CONFIG_INIT_STACK_ALL_ZERO
 872KBUILD_CFLAGS	+= -ftrivial-auto-var-init=zero
 873ifdef CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO_ENABLER
 874# https://github.com/llvm/llvm-project/issues/44842
 875CC_AUTO_VAR_INIT_ZERO_ENABLER := -enable-trivial-auto-var-init-zero-knowing-it-will-be-removed-from-clang
 876export CC_AUTO_VAR_INIT_ZERO_ENABLER
 877KBUILD_CFLAGS	+= $(CC_AUTO_VAR_INIT_ZERO_ENABLER)
 878endif
 879endif
 880
 881# While VLAs have been removed, GCC produces unreachable stack probes
 882# for the randomize_kstack_offset feature. Disable it for all compilers.
 883KBUILD_CFLAGS	+= $(call cc-option, -fno-stack-clash-protection)
 884
 885# Clear used registers at func exit (to reduce data lifetime and ROP gadgets).
 886ifdef CONFIG_ZERO_CALL_USED_REGS
 887KBUILD_CFLAGS	+= -fzero-call-used-regs=used-gpr
 888endif
 889
 890ifdef CONFIG_FUNCTION_TRACER
 891ifdef CONFIG_FTRACE_MCOUNT_USE_CC
 892  CC_FLAGS_FTRACE	+= -mrecord-mcount
 893  ifdef CONFIG_HAVE_NOP_MCOUNT
 894    ifeq ($(call cc-option-yn, -mnop-mcount),y)
 895      CC_FLAGS_FTRACE	+= -mnop-mcount
 896      CC_FLAGS_USING	+= -DCC_USING_NOP_MCOUNT
 897    endif
 898  endif
 899endif
 900ifdef CONFIG_FTRACE_MCOUNT_USE_OBJTOOL
 901  ifdef CONFIG_HAVE_OBJTOOL_NOP_MCOUNT
 902    CC_FLAGS_USING	+= -DCC_USING_NOP_MCOUNT
 903  endif
 904endif
 905ifdef CONFIG_FTRACE_MCOUNT_USE_RECORDMCOUNT
 906  ifdef CONFIG_HAVE_C_RECORDMCOUNT
 907    BUILD_C_RECORDMCOUNT := y
 908    export BUILD_C_RECORDMCOUNT
 909  endif
 910endif
 911ifdef CONFIG_HAVE_FENTRY
 912  # s390-linux-gnu-gcc did not support -mfentry until gcc-9.
 913  ifeq ($(call cc-option-yn, -mfentry),y)
 914    CC_FLAGS_FTRACE	+= -mfentry
 915    CC_FLAGS_USING	+= -DCC_USING_FENTRY
 916  endif
 917endif
 918export CC_FLAGS_FTRACE
 919KBUILD_CFLAGS	+= $(CC_FLAGS_FTRACE) $(CC_FLAGS_USING)
 920KBUILD_AFLAGS	+= $(CC_FLAGS_USING)
 921endif
 922
 923# We trigger additional mismatches with less inlining
 924ifdef CONFIG_DEBUG_SECTION_MISMATCH
 925KBUILD_CFLAGS += -fno-inline-functions-called-once
 926endif
 927
 928# `rustc`'s `-Zfunction-sections` applies to data too (as of 1.59.0).
 929ifdef CONFIG_LD_DEAD_CODE_DATA_ELIMINATION
 930KBUILD_CFLAGS_KERNEL += -ffunction-sections -fdata-sections
 931KBUILD_RUSTFLAGS_KERNEL += -Zfunction-sections=y
 932LDFLAGS_vmlinux += --gc-sections
 933endif
 934
 935ifdef CONFIG_SHADOW_CALL_STACK
 936ifndef CONFIG_DYNAMIC_SCS
 937CC_FLAGS_SCS	:= -fsanitize=shadow-call-stack
 938KBUILD_CFLAGS	+= $(CC_FLAGS_SCS)
 939endif
 940export CC_FLAGS_SCS
 941endif
 942
 943ifdef CONFIG_LTO_CLANG
 944ifdef CONFIG_LTO_CLANG_THIN
 945CC_FLAGS_LTO	:= -flto=thin -fsplit-lto-unit
 946KBUILD_LDFLAGS	+= --thinlto-cache-dir=$(extmod_prefix).thinlto-cache
 947else
 948CC_FLAGS_LTO	:= -flto
 949endif
 950CC_FLAGS_LTO	+= -fvisibility=hidden
 951
 952# Limit inlining across translation units to reduce binary size
 953KBUILD_LDFLAGS += -mllvm -import-instr-limit=5
 954
 955# Check for frame size exceeding threshold during prolog/epilog insertion
 956# when using lld < 13.0.0.
 957ifneq ($(CONFIG_FRAME_WARN),0)
 958ifeq ($(call test-lt, $(CONFIG_LLD_VERSION), 130000),y)
 959KBUILD_LDFLAGS	+= -plugin-opt=-warn-stack-size=$(CONFIG_FRAME_WARN)
 960endif
 961endif
 962endif
 963
 964ifdef CONFIG_LTO
 965KBUILD_CFLAGS	+= -fno-lto $(CC_FLAGS_LTO)
 966KBUILD_AFLAGS	+= -fno-lto
 967export CC_FLAGS_LTO
 968endif
 969
 970ifdef CONFIG_CFI_CLANG
 971CC_FLAGS_CFI	:= -fsanitize=kcfi
 972KBUILD_CFLAGS	+= $(CC_FLAGS_CFI)
 973export CC_FLAGS_CFI
 974endif
 975
 976ifneq ($(CONFIG_FUNCTION_ALIGNMENT),0)
 977KBUILD_CFLAGS += -falign-functions=$(CONFIG_FUNCTION_ALIGNMENT)
 978endif
 979
 980# arch Makefile may override CC so keep this after arch Makefile is included
 981NOSTDINC_FLAGS += -nostdinc
 
 982
 983# To gain proper coverage for CONFIG_UBSAN_BOUNDS and CONFIG_FORTIFY_SOURCE,
 984# the kernel uses only C99 flexible arrays for dynamically sized trailing
 985# arrays. Enforce this for everything that may examine structure sizes and
 986# perform bounds checking.
 987KBUILD_CFLAGS += $(call cc-option, -fstrict-flex-arrays=3)
 988
 989#Currently, disable -Wstringop-overflow for GCC 11, globally.
 990KBUILD_CFLAGS-$(CONFIG_CC_NO_STRINGOP_OVERFLOW) += $(call cc-option, -Wno-stringop-overflow)
 991KBUILD_CFLAGS-$(CONFIG_CC_STRINGOP_OVERFLOW) += $(call cc-option, -Wstringop-overflow)
 992
 993# disable invalid "can't wrap" optimizations for signed / pointers
 994KBUILD_CFLAGS	+= -fno-strict-overflow
 995
 996# Make sure -fstack-check isn't enabled (like gentoo apparently did)
 997KBUILD_CFLAGS  += -fno-stack-check
 998
 999# conserve stack if available
1000ifdef CONFIG_CC_IS_GCC
1001KBUILD_CFLAGS   += -fconserve-stack
1002endif
1003
1004# change __FILE__ to the relative path from the srctree
1005KBUILD_CPPFLAGS += $(call cc-option,-fmacro-prefix-map=$(srctree)/=)
1006
1007# include additional Makefiles when needed
1008include-y			:= scripts/Makefile.extrawarn
1009include-$(CONFIG_DEBUG_INFO)	+= scripts/Makefile.debug
1010include-$(CONFIG_DEBUG_INFO_BTF)+= scripts/Makefile.btf
1011include-$(CONFIG_KASAN)		+= scripts/Makefile.kasan
1012include-$(CONFIG_KCSAN)		+= scripts/Makefile.kcsan
1013include-$(CONFIG_KMSAN)		+= scripts/Makefile.kmsan
1014include-$(CONFIG_UBSAN)		+= scripts/Makefile.ubsan
1015include-$(CONFIG_KCOV)		+= scripts/Makefile.kcov
1016include-$(CONFIG_RANDSTRUCT)	+= scripts/Makefile.randstruct
1017include-$(CONFIG_GCC_PLUGINS)	+= scripts/Makefile.gcc-plugins
1018
1019include $(addprefix $(srctree)/, $(include-y))
1020
1021# scripts/Makefile.gcc-plugins is intentionally included last.
1022# Do not add $(call cc-option,...) below this line. When you build the kernel
1023# from the clean source tree, the GCC plugins do not exist at this point.
1024
1025# Add user supplied CPPFLAGS, AFLAGS, CFLAGS and RUSTFLAGS as the last assignments
1026KBUILD_CPPFLAGS += $(KCPPFLAGS)
1027KBUILD_AFLAGS   += $(KAFLAGS)
1028KBUILD_CFLAGS   += $(KCFLAGS)
1029KBUILD_RUSTFLAGS += $(KRUSTFLAGS)
1030
1031KBUILD_LDFLAGS_MODULE += --build-id=sha1
1032LDFLAGS_vmlinux += --build-id=sha1
1033
1034KBUILD_LDFLAGS	+= -z noexecstack
1035ifeq ($(CONFIG_LD_IS_BFD),y)
1036KBUILD_LDFLAGS	+= $(call ld-option,--no-warn-rwx-segments)
1037endif
1038
1039ifeq ($(CONFIG_STRIP_ASM_SYMS),y)
1040LDFLAGS_vmlinux	+= -X
1041endif
 
1042
1043ifeq ($(CONFIG_RELR),y)
1044# ld.lld before 15 did not support -z pack-relative-relocs.
1045LDFLAGS_vmlinux	+= $(call ld-option,--pack-dyn-relocs=relr,-z pack-relative-relocs)
1046endif
1047
1048# We never want expected sections to be placed heuristically by the
1049# linker. All sections should be explicitly named in the linker script.
1050ifdef CONFIG_LD_ORPHAN_WARN
1051LDFLAGS_vmlinux += --orphan-handling=$(CONFIG_LD_ORPHAN_WARN_LEVEL)
 
 
1052endif
1053
1054# Align the bit size of userspace programs with the kernel
1055KBUILD_USERCFLAGS  += $(filter -m32 -m64 --target=%, $(KBUILD_CFLAGS))
1056KBUILD_USERLDFLAGS += $(filter -m32 -m64 --target=%, $(KBUILD_CFLAGS))
1057
1058# make the checker run with the right architecture
1059CHECKFLAGS += --arch=$(ARCH)
1060
1061# insure the checker run with the right endianness
1062CHECKFLAGS += $(if $(CONFIG_CPU_BIG_ENDIAN),-mbig-endian,-mlittle-endian)
1063
1064# the checker needs the correct machine size
1065CHECKFLAGS += $(if $(CONFIG_64BIT),-m64,-m32)
 
1066
1067# Default kernel image to build when no specific target is given.
1068# KBUILD_IMAGE may be overruled on the command line or
1069# set in the environment
1070# Also any assignments in arch/$(ARCH)/Makefile take precedence over
1071# this default value
1072export KBUILD_IMAGE ?= vmlinux
1073
1074#
1075# INSTALL_PATH specifies where to place the updated kernel and system map
1076# images. Default is /boot, but you can set it to other values
1077export	INSTALL_PATH ?= /boot
1078
1079#
1080# INSTALL_DTBS_PATH specifies a prefix for relocations required by build roots.
1081# Like INSTALL_MOD_PATH, it isn't defined in the Makefile, but can be passed as
1082# an argument if needed. Otherwise it defaults to the kernel install path
1083#
1084export INSTALL_DTBS_PATH ?= $(INSTALL_PATH)/dtbs/$(KERNELRELEASE)
1085
1086#
1087# INSTALL_MOD_PATH specifies a prefix to MODLIB for module directory
1088# relocations required by build roots.  This is not defined in the
1089# makefile but the argument can be passed to make if needed.
1090#
1091
1092MODLIB	= $(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE)
1093export MODLIB
1094
1095PHONY += prepare0
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1096
1097export extmod_prefix = $(if $(KBUILD_EXTMOD),$(KBUILD_EXTMOD)/)
1098export MODORDER := $(extmod_prefix)modules.order
1099export MODULES_NSDEPS := $(extmod_prefix)modules.nsdeps
1100
1101ifeq ($(KBUILD_EXTMOD),)
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1102
1103build-dir	:= .
1104clean-dirs	:= $(sort . Documentation \
1105		     $(patsubst %/,%,$(filter %/, $(core-) \
1106			$(drivers-) $(libs-))))
1107
1108export ARCH_CORE	:= $(core-y)
1109export ARCH_LIB		:= $(filter %/, $(libs-y))
1110export ARCH_DRIVERS	:= $(drivers-y) $(drivers-m)
1111# Externally visible symbols (used by link-vmlinux.sh)
 
 
 
 
1112
1113KBUILD_VMLINUX_OBJS := ./built-in.a
1114ifdef CONFIG_MODULES
1115KBUILD_VMLINUX_OBJS += $(patsubst %/, %/lib.a, $(filter %/, $(libs-y)))
1116KBUILD_VMLINUX_LIBS := $(filter-out %/, $(libs-y))
1117else
1118KBUILD_VMLINUX_LIBS := $(patsubst %/,%/lib.a, $(libs-y))
1119endif
1120
1121export KBUILD_VMLINUX_LIBS
1122export KBUILD_LDS          := arch/$(SRCARCH)/kernel/vmlinux.lds
 
1123
1124ifdef CONFIG_TRIM_UNUSED_KSYMS
1125# For the kernel to actually contain only the needed exported symbols,
1126# we have to build modules as well to determine what those symbols are.
1127KBUILD_MODULES := 1
 
1128endif
 
 
 
 
 
 
 
1129
1130# '$(AR) mPi' needs 'T' to workaround the bug of llvm-ar <= 14
1131quiet_cmd_ar_vmlinux.a = AR      $@
1132      cmd_ar_vmlinux.a = \
1133	rm -f $@; \
1134	$(AR) cDPrST $@ $(KBUILD_VMLINUX_OBJS); \
1135	$(AR) mPiT $$($(AR) t $@ | sed -n 1p) $@ $$($(AR) t $@ | grep -F -f $(srctree)/scripts/head-object-list.txt)
1136
1137targets += vmlinux.a
1138vmlinux.a: $(KBUILD_VMLINUX_OBJS) scripts/head-object-list.txt FORCE
1139	$(call if_changed,ar_vmlinux.a)
1140
1141PHONY += vmlinux_o
1142vmlinux_o: vmlinux.a $(KBUILD_VMLINUX_LIBS)
1143	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.vmlinux_o
1144
1145vmlinux.o modules.builtin.modinfo modules.builtin: vmlinux_o
1146	@:
1147
1148PHONY += vmlinux
1149# LDFLAGS_vmlinux in the top Makefile defines linker flags for the top vmlinux,
1150# not for decompressors. LDFLAGS_vmlinux in arch/*/boot/compressed/Makefile is
1151# unrelated; the decompressors just happen to have the same base name,
1152# arch/*/boot/compressed/vmlinux.
1153# Export LDFLAGS_vmlinux only to scripts/Makefile.vmlinux.
1154#
1155# _LDFLAGS_vmlinux is a workaround for the 'private export' bug:
1156#   https://savannah.gnu.org/bugs/?61463
1157# For Make > 4.4, the following simple code will work:
1158#  vmlinux: private export LDFLAGS_vmlinux := $(LDFLAGS_vmlinux)
1159vmlinux: private _LDFLAGS_vmlinux := $(LDFLAGS_vmlinux)
1160vmlinux: export LDFLAGS_vmlinux = $(_LDFLAGS_vmlinux)
1161vmlinux: __KEEPMAKEFILEO__C.o $(KBUILD_LDS) modpost
1162	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.vmlinux
1163
1164# The actual objects are generated when descending,
1165# make sure no implicit rule kicks in
1166$(sort $(KBUILD_LDS) $(KBUILD_VMLINUX_OBJS) $(KBUILD_VMLINUX_LIBS)): . ;
1167
1168ifeq ($(origin KERNELRELEASE),file)
1169filechk_kernel.release = $(srctree)/scripts/setlocalversion $(srctree)
1170else
1171filechk_kernel.release = echo $(KERNELRELEASE)
1172endif
1173
1174# Store (new) KERNELRELEASE string in include/config/kernel.release
1175include/config/kernel.release: FORCE
1176	$(call filechk,kernel.release)
 
 
 
 
 
1177
1178# Additional helpers built in scripts
1179# Carefully list dependencies so we do not try to build scripts twice
1180# in parallel
1181PHONY += scripts
1182scripts: scripts_basic scripts_dtc
1183	$(Q)$(MAKE) $(build)=$(@)
1184
1185# Things we need to do before we recursively start building the kernel
1186# or the modules are listed in "prepare".
1187# A multi level approach is used. prepareN is processed before prepareN-1.
1188# archprepare is used in arch Makefiles and when processed asm symlink,
1189# version.h and scripts_basic is processed / created.
1190
1191PHONY += prepare archprepare
 
1192
1193archprepare: outputmakefile archheaders archscripts scripts include/config/kernel.release \
1194	asm-generic $(version_h) include/generated/utsrelease.h \
1195	include/generated/compile.h include/generated/autoconf.h remove-stale-files
1196
1197prepare0: archprepare
1198	$(Q)$(MAKE) $(build)=scripts/mod
1199	$(Q)$(MAKE) $(build)=. prepare
 
 
 
 
 
 
 
 
 
 
 
 
1200
1201# All the preparing..
1202prepare: prepare0
1203ifdef CONFIG_RUST
1204	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/rust_is_available.sh
1205	$(Q)$(MAKE) $(build)=rust
1206endif
1207
1208PHONY += remove-stale-files
1209remove-stale-files:
1210	$(Q)$(srctree)/scripts/remove-stale-files
1211
1212# Support for using generic headers in asm-generic
1213asm-generic := -f $(srctree)/scripts/Makefile.asm-generic obj
1214
1215PHONY += asm-generic uapi-asm-generic
1216asm-generic: uapi-asm-generic
1217	$(Q)$(MAKE) $(asm-generic)=arch/$(SRCARCH)/include/generated/asm \
1218	generic=include/asm-generic
1219uapi-asm-generic:
1220	$(Q)$(MAKE) $(asm-generic)=arch/$(SRCARCH)/include/generated/uapi/asm \
1221	generic=include/uapi/asm-generic
1222
1223# Generate some files
1224# ---------------------------------------------------------------------------
1225
1226# KERNELRELEASE can change from a few different places, meaning version.h
1227# needs to be updated, so this check is forced on all builds
1228
1229uts_len := 64
1230define filechk_utsrelease.h
1231	if [ `echo -n "$(KERNELRELEASE)" | wc -c ` -gt $(uts_len) ]; then \
1232	  echo '"$(KERNELRELEASE)" exceeds $(uts_len) characters' >&2;    \
1233	  exit 1;                                                         \
1234	fi;                                                               \
1235	echo \#define UTS_RELEASE \"$(KERNELRELEASE)\"
1236endef
1237
1238define filechk_version.h
1239	if [ $(SUBLEVEL) -gt 255 ]; then                                 \
1240		echo \#define LINUX_VERSION_CODE $(shell                 \
1241		expr $(VERSION) \* 65536 + $(PATCHLEVEL) \* 256 + 255); \
1242	else                                                             \
1243		echo \#define LINUX_VERSION_CODE $(shell                 \
1244		expr $(VERSION) \* 65536 + $(PATCHLEVEL) \* 256 + $(SUBLEVEL)); \
1245	fi;                                                              \
1246	echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) +  \
1247	((c) > 255 ? 255 : (c)))';                                       \
1248	echo \#define LINUX_VERSION_MAJOR $(VERSION);                    \
1249	echo \#define LINUX_VERSION_PATCHLEVEL $(PATCHLEVEL);            \
1250	echo \#define LINUX_VERSION_SUBLEVEL $(SUBLEVEL)
1251endef
1252
1253$(version_h): PATCHLEVEL := $(or $(PATCHLEVEL), 0)
1254$(version_h): SUBLEVEL := $(or $(SUBLEVEL), 0)
1255$(version_h): FORCE
1256	$(call filechk,version.h)
1257
1258include/generated/utsrelease.h: include/config/kernel.release FORCE
1259	$(call filechk,utsrelease.h)
1260
1261filechk_compile.h = $(srctree)/scripts/mkcompile_h \
1262	"$(UTS_MACHINE)" "$(CONFIG_CC_VERSION_TEXT)" "$(LD)"
1263
1264include/generated/compile.h: FORCE
1265	$(call filechk,compile.h)
1266
1267PHONY += headerdep
1268headerdep:
1269	$(Q)find $(srctree)/include/ -name '*.h' | xargs --max-args 1 \
1270	$(srctree)/scripts/headerdep.pl -I$(srctree)/include
1271
1272# ---------------------------------------------------------------------------
1273# Kernel headers
1274
1275#Default location for installed headers
1276export INSTALL_HDR_PATH = $(objtree)/usr
1277
1278quiet_cmd_headers_install = INSTALL $(INSTALL_HDR_PATH)/include
1279      cmd_headers_install = \
1280	mkdir -p $(INSTALL_HDR_PATH); \
1281	rsync -mrl --include='*/' --include='*\.h' --exclude='*' \
1282	usr/include $(INSTALL_HDR_PATH)
1283
1284PHONY += headers_install
1285headers_install: headers
1286	$(call cmd,headers_install)
1287
1288PHONY += archheaders archscripts
1289
1290hdr-inst := -f $(srctree)/scripts/Makefile.headersinst obj
1291
1292PHONY += headers
1293headers: $(version_h) scripts_unifdef uapi-asm-generic archheaders archscripts
1294	$(if $(filter um, $(SRCARCH)), $(error Headers not exportable for UML))
1295	$(Q)$(MAKE) $(hdr-inst)=include/uapi
1296	$(Q)$(MAKE) $(hdr-inst)=arch/$(SRCARCH)/include/uapi
1297
1298ifdef CONFIG_HEADERS_INSTALL
1299prepare: headers
1300endif
1301
1302PHONY += scripts_unifdef
1303scripts_unifdef: scripts_basic
1304	$(Q)$(MAKE) $(build)=scripts scripts/unifdef
1305
1306# ---------------------------------------------------------------------------
1307# Install
1308
1309# Many distributions have the custom install script, /sbin/installkernel.
1310# If DKMS is installed, 'make install' will eventually recurse back
1311# to this Makefile to build and install external modules.
1312# Cancel sub_make_done so that options such as M=, V=, etc. are parsed.
1313
1314quiet_cmd_install = INSTALL $(INSTALL_PATH)
1315      cmd_install = unset sub_make_done; $(srctree)/scripts/install.sh
1316
1317# ---------------------------------------------------------------------------
1318# vDSO install
1319
1320PHONY += vdso_install
1321vdso_install: export INSTALL_FILES = $(vdso-install-y)
1322vdso_install:
1323	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.vdsoinst
1324
1325# ---------------------------------------------------------------------------
1326# Tools
1327
1328ifdef CONFIG_OBJTOOL
1329prepare: tools/objtool
1330endif
1331
1332ifdef CONFIG_BPF
1333ifdef CONFIG_DEBUG_INFO_BTF
1334prepare: tools/bpf/resolve_btfids
1335endif
1336endif
1337
1338PHONY += resolve_btfids_clean
1339
1340resolve_btfids_O = $(abspath $(objtree))/tools/bpf/resolve_btfids
1341
1342# tools/bpf/resolve_btfids directory might not exist
1343# in output directory, skip its clean in that case
1344resolve_btfids_clean:
1345ifneq ($(wildcard $(resolve_btfids_O)),)
1346	$(Q)$(MAKE) -sC $(srctree)/tools/bpf/resolve_btfids O=$(resolve_btfids_O) clean
1347endif
1348
1349# Clear a bunch of variables before executing the submake
1350ifeq ($(quiet),silent_)
1351tools_silent=s
1352endif
1353
1354tools/: FORCE
1355	$(Q)mkdir -p $(objtree)/tools
1356	$(Q)$(MAKE) LDFLAGS= MAKEFLAGS="$(tools_silent) $(filter --j% -j,$(MAKEFLAGS))" O=$(abspath $(objtree)) subdir=tools -C $(srctree)/tools/
1357
1358tools/%: FORCE
1359	$(Q)mkdir -p $(objtree)/tools
1360	$(Q)$(MAKE) LDFLAGS= MAKEFLAGS="$(tools_silent) $(filter --j% -j,$(MAKEFLAGS))" O=$(abspath $(objtree)) subdir=tools -C $(srctree)/tools/ $*
1361
1362# ---------------------------------------------------------------------------
1363# Kernel selftest
1364
1365PHONY += kselftest
1366kselftest: headers
1367	$(Q)$(MAKE) -C $(srctree)/tools/testing/selftests run_tests
1368
1369kselftest-%: headers FORCE
1370	$(Q)$(MAKE) -C $(srctree)/tools/testing/selftests $*
1371
1372PHONY += kselftest-merge
1373kselftest-merge:
1374	$(if $(wildcard $(objtree)/.config),, $(error No .config exists, config your kernel first!))
1375	$(Q)find $(srctree)/tools/testing/selftests -name config -o -name config.$(UTS_MACHINE) | \
1376		xargs $(srctree)/scripts/kconfig/merge_config.sh -y -m $(objtree)/.config
1377	$(Q)$(MAKE) -f $(srctree)/Makefile olddefconfig
1378
1379# ---------------------------------------------------------------------------
1380# Devicetree files
1381
1382ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/boot/dts/),)
1383dtstree := arch/$(SRCARCH)/boot/dts
1384endif
1385
1386ifneq ($(dtstree),)
1387
1388%.dtb: dtbs_prepare
1389	$(Q)$(MAKE) $(build)=$(dtstree) $(dtstree)/$@
1390
1391%.dtbo: dtbs_prepare
1392	$(Q)$(MAKE) $(build)=$(dtstree) $(dtstree)/$@
1393
1394PHONY += dtbs dtbs_prepare dtbs_install dtbs_check
1395dtbs: dtbs_prepare
1396	$(Q)$(MAKE) $(build)=$(dtstree)
1397
1398# include/config/kernel.release is actually needed when installing DTBs because
1399# INSTALL_DTBS_PATH contains $(KERNELRELEASE). However, we do not want to make
1400# dtbs_install depend on it as dtbs_install may run as root.
1401dtbs_prepare: include/config/kernel.release scripts_dtc
1402
1403ifneq ($(filter dtbs_check, $(MAKECMDGOALS)),)
1404export CHECK_DTBS=y
1405endif
1406
1407ifneq ($(CHECK_DTBS),)
1408dtbs_prepare: dt_binding_check
1409endif
1410
1411dtbs_check: dtbs
 
1412
1413dtbs_install:
1414	$(Q)$(MAKE) $(dtbinst)=$(dtstree) dst=$(INSTALL_DTBS_PATH)
1415
1416ifdef CONFIG_OF_EARLY_FLATTREE
1417all: dtbs
1418endif
1419
1420endif
 
1421
1422PHONY += scripts_dtc
1423scripts_dtc: scripts_basic
1424	$(Q)$(MAKE) $(build)=scripts/dtc
1425
1426ifneq ($(filter dt_binding_check, $(MAKECMDGOALS)),)
1427export CHECK_DT_BINDING=y
1428endif
1429
1430PHONY += dt_binding_check
1431dt_binding_check: scripts_dtc
1432	$(Q)$(MAKE) $(build)=Documentation/devicetree/bindings
1433
1434PHONY += dt_compatible_check
1435dt_compatible_check: dt_binding_check
1436	$(Q)$(MAKE) $(build)=Documentation/devicetree/bindings $@
 
 
 
 
 
 
 
 
 
 
 
 
1437
1438# ---------------------------------------------------------------------------
1439# Modules
1440
1441ifdef CONFIG_MODULES
1442
1443# By default, build modules as well
1444
1445all: modules
1446
1447# When we're building modules with modversions, we need to consider
1448# the built-in objects during the descend as well, in order to
1449# make sure the checksums are up to date before we record them.
1450ifdef CONFIG_MODVERSIONS
1451  KBUILD_BUILTIN := 1
1452endif
1453
1454# Build modules
1455#
 
 
 
 
 
 
 
 
 
 
1456
1457# *.ko are usually independent of vmlinux, but CONFIG_DEBUG_INFO_BTF_MODULES
1458# is an exception.
1459ifdef CONFIG_DEBUG_INFO_BTF_MODULES
1460KBUILD_BUILTIN := 1
1461modules: vmlinux
1462endif
1463
1464modules: modules_prepare
1465
1466# Target to prepare building external modules
1467modules_prepare: prepare
1468	$(Q)$(MAKE) $(build)=scripts scripts/module.lds
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1469
1470endif # CONFIG_MODULES
1471
1472###
1473# Cleaning is done on three levels.
1474# make clean     Delete most generated files
1475#                Leave enough to build external modules
1476# make mrproper  Delete the current configuration, and all generated files
1477# make distclean Remove editor backup files, patch leftover files and the like
1478
1479# Directories & files removed with 'make clean'
1480CLEAN_FILES += vmlinux.symvers modules-only.symvers \
1481	       modules.builtin modules.builtin.modinfo modules.nsdeps \
1482	       compile_commands.json .thinlto-cache rust/test \
1483	       rust-project.json .vmlinux.objs .vmlinux.export.c
1484
1485# Directories & files removed with 'make mrproper'
1486MRPROPER_FILES += include/config include/generated          \
1487		  arch/$(SRCARCH)/include/generated .objdiff \
1488		  debian snap tar-install \
1489		  .config .config.old .version \
1490		  Module.symvers \
1491		  certs/signing_key.pem \
1492		  certs/x509.genkey \
1493		  vmlinux-gdb.py \
1494		  rpmbuild \
1495		  rust/libmacros.so
1496
1497# clean - Delete most, but leave enough to build external modules
1498#
 
1499clean: rm-files := $(CLEAN_FILES)
 
1500
1501PHONY += archclean vmlinuxclean
1502
1503vmlinuxclean:
1504	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/link-vmlinux.sh clean
1505	$(Q)$(if $(ARCH_POSTLINK), $(MAKE) -f $(ARCH_POSTLINK) clean)
1506
1507clean: archclean vmlinuxclean resolve_btfids_clean
1508
1509# mrproper - Delete all generated files, including .config
1510#
 
1511mrproper: rm-files := $(wildcard $(MRPROPER_FILES))
1512mrproper-dirs      := $(addprefix _mrproper_,scripts)
1513
1514PHONY += $(mrproper-dirs) mrproper
1515$(mrproper-dirs):
1516	$(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@)
1517
1518mrproper: clean $(mrproper-dirs)
 
1519	$(call cmd,rmfiles)
1520	@find . $(RCS_FIND_IGNORE) \
1521		\( -name '*.rmeta' \) \
1522		-type f -print | xargs rm -f
1523
1524# distclean
1525#
1526PHONY += distclean
1527
1528distclean: mrproper
1529	@find . $(RCS_FIND_IGNORE) \
1530		\( -name '*.orig' -o -name '*.rej' -o -name '*~' \
1531		-o -name '*.bak' -o -name '#*#' -o -name '*%' \
1532		-o -name 'core' -o -name tags -o -name TAGS -o -name 'cscope*' \
1533		-o -name GPATH -o -name GRTAGS -o -name GSYMS -o -name GTAGS \) \
1534		-type f -print | xargs rm -f
1535
1536
1537# Packaging of the kernel to various formats
1538# ---------------------------------------------------------------------------
 
 
1539
1540%src-pkg: FORCE
1541	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.package $@
1542%pkg: include/config/kernel.release FORCE
1543	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.package $@
 
 
 
1544
1545# Brief documentation of the typical targets used
1546# ---------------------------------------------------------------------------
1547
1548boards := $(wildcard $(srctree)/arch/$(SRCARCH)/configs/*_defconfig)
1549boards := $(sort $(notdir $(boards)))
1550board-dirs := $(dir $(wildcard $(srctree)/arch/$(SRCARCH)/configs/*/*_defconfig))
1551board-dirs := $(sort $(notdir $(board-dirs:/=)))
1552
1553PHONY += help
1554help:
1555	@echo  'Cleaning targets:'
1556	@echo  '  clean		  - Remove most generated files but keep the config and'
1557	@echo  '                    enough build support to build external modules'
1558	@echo  '  mrproper	  - Remove all generated files + config + various backup files'
1559	@echo  '  distclean	  - mrproper + remove editor backup and patch files'
1560	@echo  ''
 
1561	@$(MAKE) -f $(srctree)/scripts/kconfig/Makefile help
1562	@echo  ''
1563	@echo  'Other generic targets:'
1564	@echo  '  all		  - Build all targets marked with [*]'
1565	@echo  '* vmlinux	  - Build the bare kernel'
1566	@echo  '* modules	  - Build all modules'
1567	@echo  '  modules_install - Install all modules to INSTALL_MOD_PATH (default: /)'
1568	@echo  '  vdso_install    - Install unstripped vdso to INSTALL_MOD_PATH (default: /)'
 
1569	@echo  '  dir/            - Build all files in dir and below'
1570	@echo  '  dir/file.[ois]  - Build specified target only'
1571	@echo  '  dir/file.ll     - Build the LLVM assembly file'
1572	@echo  '                    (requires compiler support for LLVM assembly generation)'
1573	@echo  '  dir/file.lst    - Build specified mixed source/assembly target only'
1574	@echo  '                    (requires a recent binutils and recent build (System.map))'
1575	@echo  '  dir/file.ko     - Build module including final link'
1576	@echo  '  modules_prepare - Set up for building external modules'
1577	@echo  '  tags/TAGS	  - Generate tags file for editors'
1578	@echo  '  cscope	  - Generate cscope index'
1579	@echo  '  gtags           - Generate GNU GLOBAL index'
1580	@echo  '  kernelrelease	  - Output the release version string (use with make -s)'
1581	@echo  '  kernelversion	  - Output the version stored in Makefile (use with make -s)'
1582	@echo  '  image_name	  - Output the image name (use with make -s)'
1583	@echo  '  headers_install - Install sanitised kernel headers to INSTALL_HDR_PATH'; \
1584	 echo  '                    (default: $(INSTALL_HDR_PATH))'; \
1585	 echo  ''
1586	@echo  'Static analysers:'
1587	@echo  '  checkstack      - Generate a list of stack hogs and consider all functions'
1588	@echo  '                    with a stack size larger than MINSTACKSIZE (default: 100)'
1589	@echo  '  versioncheck    - Sanity check on version.h usage'
1590	@echo  '  includecheck    - Check for duplicate included header files'
1591	@echo  '  export_report   - List the usages of all exported symbols'
 
1592	@echo  '  headerdep       - Detect inclusion cycles in headers'
1593	@echo  '  coccicheck      - Check with Coccinelle'
1594	@echo  '  clang-analyzer  - Check with clang static analyzer'
1595	@echo  '  clang-tidy      - Check with clang-tidy'
1596	@echo  ''
1597	@echo  'Tools:'
1598	@echo  '  nsdeps          - Generate missing symbol namespace dependencies'
1599	@echo  ''
1600	@echo  'Kernel selftest:'
1601	@echo  '  kselftest         - Build and run kernel selftest'
1602	@echo  '                      Build, install, and boot kernel before'
1603	@echo  '                      running kselftest on it'
1604	@echo  '                      Run as root for full coverage'
1605	@echo  '  kselftest-all     - Build kernel selftest'
1606	@echo  '  kselftest-install - Build and install kernel selftest'
1607	@echo  '  kselftest-clean   - Remove all generated kselftest files'
1608	@echo  '  kselftest-merge   - Merge all the config dependencies of'
1609	@echo  '		      kselftest to existing .config.'
1610	@echo  ''
1611	@echo  'Rust targets:'
1612	@echo  '  rustavailable   - Checks whether the Rust toolchain is'
1613	@echo  '		    available and, if not, explains why.'
1614	@echo  '  rustfmt	  - Reformat all the Rust code in the kernel'
1615	@echo  '  rustfmtcheck	  - Checks if all the Rust code in the kernel'
1616	@echo  '		    is formatted, printing a diff otherwise.'
1617	@echo  '  rustdoc	  - Generate Rust documentation'
1618	@echo  '		    (requires kernel .config)'
1619	@echo  '  rusttest        - Runs the Rust tests'
1620	@echo  '                    (requires kernel .config; downloads external repos)'
1621	@echo  '  rust-analyzer	  - Generate rust-project.json rust-analyzer support file'
1622	@echo  '		    (requires kernel .config)'
1623	@echo  '  dir/file.[os]   - Build specified target only'
1624	@echo  '  dir/file.rsi    - Build macro expanded source, similar to C preprocessing.'
1625	@echo  '                    Run with RUSTFMT=n to skip reformatting if needed.'
1626	@echo  '                    The output is not intended to be compilable.'
1627	@echo  '  dir/file.ll     - Build the LLVM assembly file'
1628	@echo  ''
1629	@$(if $(dtstree), \
1630		echo 'Devicetree:'; \
1631		echo '* dtbs             - Build device tree blobs for enabled boards'; \
1632		echo '  dtbs_install     - Install dtbs to $(INSTALL_DTBS_PATH)'; \
1633		echo '  dt_binding_check - Validate device tree binding documents'; \
1634		echo '  dtbs_check       - Validate device tree source files';\
1635		echo '')
1636
1637	@echo 'Userspace tools targets:'
1638	@echo '  use "make tools/help"'
1639	@echo '  or  "cd tools; make help"'
1640	@echo  ''
1641	@echo  'Kernel packaging:'
1642	@$(MAKE) -f $(srctree)/scripts/Makefile.package help
1643	@echo  ''
1644	@echo  'Documentation targets:'
1645	@$(MAKE) -f $(srctree)/Documentation/Makefile dochelp
1646	@echo  ''
1647	@echo  'Architecture-specific targets ($(SRCARCH)):'
1648	@$(or $(archhelp),\
1649		echo '  No architecture-specific help defined for $(SRCARCH)')
1650	@echo  ''
1651	@$(if $(boards), \
1652		$(foreach b, $(boards), \
1653		printf "  %-27s - Build for %s\\n" $(b) $(subst _defconfig,,$(b));) \
1654		echo '')
1655	@$(if $(board-dirs), \
1656		$(foreach b, $(board-dirs), \
1657		printf "  %-16s - Show %s-specific targets\\n" help-$(b) $(b);) \
1658		printf "  %-16s - Show all of the above\\n" help-boards; \
1659		echo '')
1660
1661	@echo  '  make V=n   [targets] 1: verbose build'
1662	@echo  '                       2: give reason for rebuild of target'
1663	@echo  '                       V=1 and V=2 can be combined with V=12'
1664	@echo  '  make O=dir [targets] Locate all output files in "dir", including .config'
1665	@echo  '  make C=1   [targets] Check re-compiled c source with $$CHECK'
1666	@echo  '                       (sparse by default)'
1667	@echo  '  make C=2   [targets] Force check of all c source with $$CHECK'
1668	@echo  '  make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections'
1669	@echo  '  make W=n   [targets] Enable extra build checks, n=1,2,3,c,e where'
1670	@echo  '		1: warnings which may be relevant and do not occur too often'
1671	@echo  '		2: warnings which occur quite often but may still be relevant'
1672	@echo  '		3: more obscure warnings, can most likely be ignored'
1673	@echo  '		c: extra checks in the configuration stage (Kconfig)'
1674	@echo  '		e: warnings are being treated as errors'
1675	@echo  '		Multiple levels can be combined with W=12 or W=123'
1676	@$(if $(dtstree), \
1677		echo '  make CHECK_DTBS=1 [targets] Check all generated dtb files against schema'; \
1678		echo '         This can be applied both to "dtbs" and to individual "foo.dtb" targets' ; \
1679		)
1680	@echo  ''
1681	@echo  'Execute "make" or "make all" to build all targets marked with [*] '
1682	@echo  'For further info see the ./README file'
1683
1684
1685help-board-dirs := $(addprefix help-,$(board-dirs))
1686
1687help-boards: $(help-board-dirs)
1688
1689boards-per-dir = $(sort $(notdir $(wildcard $(srctree)/arch/$(SRCARCH)/configs/$*/*_defconfig)))
1690
1691$(help-board-dirs): help-%:
1692	@echo  'Architecture-specific targets ($(SRCARCH) $*):'
1693	@$(if $(boards-per-dir), \
1694		$(foreach b, $(boards-per-dir), \
1695		printf "  %-24s - Build for %s\\n" $*/$(b) $(subst _defconfig,,$(b));) \
1696		echo '')
1697
1698
1699# Documentation targets
1700# ---------------------------------------------------------------------------
1701DOC_TARGETS := xmldocs latexdocs pdfdocs htmldocs epubdocs cleandocs \
1702	       linkcheckdocs dochelp refcheckdocs texinfodocs infodocs
1703PHONY += $(DOC_TARGETS)
1704$(DOC_TARGETS):
1705	$(Q)$(MAKE) $(build)=Documentation $@
1706
1707
1708# Rust targets
1709# ---------------------------------------------------------------------------
1710
1711# "Is Rust available?" target
1712PHONY += rustavailable
1713rustavailable:
1714	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/rust_is_available.sh && echo "Rust is available!"
1715
1716# Documentation target
1717#
1718# Using the singular to avoid running afoul of `no-dot-config-targets`.
1719PHONY += rustdoc
1720rustdoc: prepare
1721	$(Q)$(MAKE) $(build)=rust $@
1722
1723# Testing target
1724PHONY += rusttest
1725rusttest: prepare
1726	$(Q)$(MAKE) $(build)=rust $@
1727
1728# Formatting targets
1729PHONY += rustfmt rustfmtcheck
1730
1731# We skip `rust/alloc` since we want to minimize the diff w.r.t. upstream.
1732#
1733# We match using absolute paths since `find` does not resolve them
1734# when matching, which is a problem when e.g. `srctree` is `..`.
1735# We `grep` afterwards in order to remove the directory entry itself.
1736rustfmt:
1737	$(Q)find $(abs_srctree) -type f -name '*.rs' \
1738		-o -path $(abs_srctree)/rust/alloc -prune \
1739		-o -path $(abs_objtree)/rust/test -prune \
1740		| grep -Fv $(abs_srctree)/rust/alloc \
1741		| grep -Fv $(abs_objtree)/rust/test \
1742		| grep -Fv generated \
1743		| xargs $(RUSTFMT) $(rustfmt_flags)
1744
1745rustfmtcheck: rustfmt_flags = --check
1746rustfmtcheck: rustfmt
1747
1748# Misc
1749# ---------------------------------------------------------------------------
1750
1751PHONY += misc-check
1752misc-check:
1753	$(Q)$(srctree)/scripts/misc-check
1754
1755all: misc-check
1756
1757PHONY += scripts_gdb
1758scripts_gdb: prepare0
1759	$(Q)$(MAKE) $(build)=scripts/gdb
1760	$(Q)ln -fsn $(abspath $(srctree)/scripts/gdb/vmlinux-gdb.py)
1761
1762ifdef CONFIG_GDB_SCRIPTS
1763all: scripts_gdb
1764endif
1765
1766else # KBUILD_EXTMOD
1767
1768filechk_kernel.release = echo $(KERNELRELEASE)
1769
1770###
1771# External module support.
1772# When building external modules the kernel used as basis is considered
1773# read-only, and no consistency checks are made and the make
1774# system is not used on the basis kernel. If updates are required
1775# in the basis kernel ordinary make commands (without M=...) must be used.
 
 
 
 
 
 
 
 
 
 
1776
1777# We are always building only modules.
1778KBUILD_BUILTIN :=
1779KBUILD_MODULES := 1
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1780
1781build-dir := $(KBUILD_EXTMOD)
 
 
1782
1783compile_commands.json: $(extmod_prefix)compile_commands.json
1784PHONY += compile_commands.json
1785
1786clean-dirs := $(KBUILD_EXTMOD)
1787clean: rm-files := $(KBUILD_EXTMOD)/Module.symvers $(KBUILD_EXTMOD)/modules.nsdeps \
1788	$(KBUILD_EXTMOD)/compile_commands.json $(KBUILD_EXTMOD)/.thinlto-cache
1789
1790PHONY += prepare
1791# now expand this into a simple variable to reduce the cost of shell evaluations
1792prepare: CC_VERSION_TEXT := $(CC_VERSION_TEXT)
1793prepare:
1794	@if [ "$(CC_VERSION_TEXT)" != "$(CONFIG_CC_VERSION_TEXT)" ]; then \
1795		echo >&2 "warning: the compiler differs from the one used to build the kernel"; \
1796		echo >&2 "  The kernel was built by: $(CONFIG_CC_VERSION_TEXT)"; \
1797		echo >&2 "  You are using:           $(CC_VERSION_TEXT)"; \
1798	fi
 
 
 
 
 
1799
1800PHONY += help
1801help:
1802	@echo  '  Building external modules.'
1803	@echo  '  Syntax: make -C path/to/kernel/src M=$$PWD target'
1804	@echo  ''
1805	@echo  '  modules         - default target, build the module(s)'
1806	@echo  '  modules_install - install the module'
1807	@echo  '  clean           - remove generated files in module directory only'
1808	@echo  '  rust-analyzer	  - generate rust-project.json rust-analyzer support file'
1809	@echo  ''
1810
1811ifndef CONFIG_MODULES
1812modules modules_install: __external_modules_error
1813__external_modules_error:
1814	@echo >&2 '***'
1815	@echo >&2 '*** The present kernel disabled CONFIG_MODULES.'
1816	@echo >&2 '*** You cannot build or install external modules.'
1817	@echo >&2 '***'
1818	@false
1819endif
1820
1821endif # KBUILD_EXTMOD
1822
1823# ---------------------------------------------------------------------------
1824# Modules
1825
1826PHONY += modules modules_install modules_sign modules_prepare
1827
1828modules_install:
1829	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modinst \
1830	sign-only=$(if $(filter modules_install,$(MAKECMDGOALS)),,y)
1831
1832ifeq ($(CONFIG_MODULE_SIG),y)
1833# modules_sign is a subset of modules_install.
1834# 'make modules_install modules_sign' is equivalent to 'make modules_install'.
1835modules_sign: modules_install
1836	@:
1837else
1838modules_sign:
1839	@echo >&2 '***'
1840	@echo >&2 '*** CONFIG_MODULE_SIG is disabled. You cannot sign modules.'
1841	@echo >&2 '***'
1842	@false
1843endif
1844
1845ifdef CONFIG_MODULES
1846
1847$(MODORDER): $(build-dir)
1848	@:
1849
1850# KBUILD_MODPOST_NOFINAL can be set to skip the final link of modules.
1851# This is solely useful to speed up test compiles.
1852modules: modpost
1853ifneq ($(KBUILD_MODPOST_NOFINAL),1)
1854	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modfinal
1855endif
1856
1857PHONY += modules_check
1858modules_check: $(MODORDER)
1859	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/modules-check.sh $<
1860
1861else # CONFIG_MODULES
1862
1863modules:
1864	@:
1865
1866KBUILD_MODULES :=
1867
1868endif # CONFIG_MODULES
1869
1870PHONY += modpost
1871modpost: $(if $(single-build),, $(if $(KBUILD_BUILTIN), vmlinux.o)) \
1872	 $(if $(KBUILD_MODULES), modules_check)
1873	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
1874
1875# Single targets
1876# ---------------------------------------------------------------------------
1877# To build individual files in subdirectories, you can do like this:
1878#
1879#   make foo/bar/baz.s
1880#
1881# The supported suffixes for single-target are listed in 'single-targets'
1882#
1883# To build only under specific subdirectories, you can do like this:
1884#
1885#   make foo/bar/baz/
1886
1887ifdef single-build
1888
1889# .ko is special because modpost is needed
1890single-ko := $(sort $(filter %.ko, $(MAKECMDGOALS)))
1891single-no-ko := $(filter-out $(single-ko), $(MAKECMDGOALS)) \
1892		$(foreach x, o mod, $(patsubst %.ko, %.$x, $(single-ko)))
1893
1894$(single-ko): single_modules
1895	@:
1896$(single-no-ko): $(build-dir)
1897	@:
1898
1899# Remove MODORDER when done because it is not the real one.
1900PHONY += single_modules
1901single_modules: $(single-no-ko) modules_prepare
1902	$(Q){ $(foreach m, $(single-ko), echo $(extmod_prefix)$(m:%.ko=%.o);) } > $(MODORDER)
1903	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
1904ifneq ($(KBUILD_MODPOST_NOFINAL),1)
1905	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modfinal
1906endif
1907	$(Q)rm -f $(MODORDER)
1908
1909single-goals := $(addprefix $(build-dir)/, $(single-no-ko))
1910
1911KBUILD_MODULES := 1
1912
1913endif
1914
1915# Preset locale variables to speed up the build process. Limit locale
1916# tweaks to this spot to avoid wrong language settings when running
1917# make menuconfig etc.
1918# Error messages still appears in the original language
1919PHONY += $(build-dir)
1920$(build-dir): prepare
1921	$(Q)$(MAKE) $(build)=$@ need-builtin=1 need-modorder=1 $(single-goals)
1922
1923clean-dirs := $(addprefix _clean_, $(clean-dirs))
1924PHONY += $(clean-dirs) clean
1925$(clean-dirs):
1926	$(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
1927
1928clean: $(clean-dirs)
 
 
1929	$(call cmd,rmfiles)
1930	@find $(or $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \
1931		\( -name '*.[aios]' -o -name '*.rsi' -o -name '*.ko' -o -name '.*.cmd' \
1932		-o -name '*.ko.*' \
1933		-o -name '*.dtb' -o -name '*.dtbo' \
1934		-o -name '*.dtb.S' -o -name '*.dtbo.S' \
1935		-o -name '*.dt.yaml' \
1936		-o -name '*.dwo' -o -name '*.lst' \
1937		-o -name '*.su' -o -name '*.mod' \
1938		-o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
1939		-o -name '*.lex.c' -o -name '*.tab.[ch]' \
1940		-o -name '*.asn1.[ch]' \
1941		-o -name '*.symtypes' -o -name 'modules.order' \
1942		-o -name '*.c.[012]*.*' \
1943		-o -name '*.ll' \
1944		-o -name '*.gcno' \
1945		-o -name '*.*.symversions' \) -type f -print \
1946		-o -name '.tmp_*' -print \
1947		| xargs rm -rf
1948
1949# Generate tags for editors
1950# ---------------------------------------------------------------------------
1951quiet_cmd_tags = GEN     $@
1952      cmd_tags = $(BASH) $(srctree)/scripts/tags.sh $@
1953
1954tags TAGS cscope gtags: FORCE
1955	$(call cmd,tags)
1956
1957# IDE support targets
1958PHONY += rust-analyzer
1959rust-analyzer:
1960	$(Q)$(MAKE) $(build)=rust $@
1961
1962# Script to generate missing namespace dependencies
1963# ---------------------------------------------------------------------------
1964
1965PHONY += nsdeps
1966nsdeps: export KBUILD_NSDEPS=1
1967nsdeps: modules
1968	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/nsdeps
1969
1970# Clang Tooling
1971# ---------------------------------------------------------------------------
1972
1973quiet_cmd_gen_compile_commands = GEN     $@
1974      cmd_gen_compile_commands = $(PYTHON3) $< -a $(AR) -o $@ $(filter-out $<, $(real-prereqs))
1975
1976$(extmod_prefix)compile_commands.json: scripts/clang-tools/gen_compile_commands.py \
1977	$(if $(KBUILD_EXTMOD),, vmlinux.a $(KBUILD_VMLINUX_LIBS)) \
1978	$(if $(CONFIG_MODULES), $(MODORDER)) FORCE
1979	$(call if_changed,gen_compile_commands)
1980
1981targets += $(extmod_prefix)compile_commands.json
1982
1983PHONY += clang-tidy clang-analyzer
1984
1985ifdef CONFIG_CC_IS_CLANG
1986quiet_cmd_clang_tools = CHECK   $<
1987      cmd_clang_tools = $(PYTHON3) $(srctree)/scripts/clang-tools/run-clang-tools.py $@ $<
1988
1989clang-tidy clang-analyzer: $(extmod_prefix)compile_commands.json
1990	$(call cmd,clang_tools)
1991else
1992clang-tidy clang-analyzer:
1993	@echo "$@ requires CC=clang" >&2
1994	@false
1995endif
1996
1997# Scripts to check various things for consistency
1998# ---------------------------------------------------------------------------
1999
2000PHONY += includecheck versioncheck coccicheck export_report
2001
2002includecheck:
2003	find $(srctree)/* $(RCS_FIND_IGNORE) \
2004		-name '*.[hcS]' -type f -print | sort \
2005		| xargs $(PERL) -w $(srctree)/scripts/checkincludes.pl
2006
2007versioncheck:
2008	find $(srctree)/* $(RCS_FIND_IGNORE) \
2009		-name '*.[hcS]' -type f -print | sort \
2010		| xargs $(PERL) -w $(srctree)/scripts/checkversion.pl
2011
2012coccicheck:
2013	$(Q)$(BASH) $(srctree)/scripts/$@
 
 
 
2014
2015export_report:
2016	$(PERL) $(srctree)/scripts/export_report.pl
2017
2018PHONY += checkstack kernelrelease kernelversion image_name
 
 
 
2019
2020# UML needs a little special treatment here.  It wants to use the host
2021# toolchain, so needs $(SUBARCH) passed to checkstack.pl.  Everyone
2022# else wants $(ARCH), including people doing cross-builds, which means
2023# that $(SUBARCH) doesn't work here.
2024ifeq ($(ARCH), um)
2025CHECKSTACK_ARCH := $(SUBARCH)
2026else
2027CHECKSTACK_ARCH := $(ARCH)
2028endif
2029MINSTACKSIZE	?= 100
2030checkstack:
2031	$(OBJDUMP) -d vmlinux $$(find . -name '*.ko') | \
2032	$(PERL) $(srctree)/scripts/checkstack.pl $(CHECKSTACK_ARCH) $(MINSTACKSIZE)
2033
2034kernelrelease:
2035	@$(filechk_kernel.release)
2036
2037kernelversion:
2038	@echo $(KERNELVERSION)
2039
2040image_name:
2041	@echo $(KBUILD_IMAGE)
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
2042
2043PHONY += run-command
2044run-command:
2045	$(Q)$(KBUILD_RUN_COMMAND)
2046
2047quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN   $(wildcard $(rm-files)))
2048      cmd_rmfiles = rm -rf $(rm-files)
 
 
 
 
 
2049
2050# read saved command lines for existing targets
2051existing-targets := $(wildcard $(sort $(targets)))
 
 
 
 
 
 
 
 
 
 
 
 
2052
2053-include $(foreach f,$(existing-targets),$(dir $(f)).$(notdir $(f)).cmd)
 
 
 
2054
2055endif # config-build
2056endif # mixed-build
2057endif # need-sub-make
2058
2059PHONY += FORCE
2060FORCE:
2061
2062# Declare the contents of the PHONY variable as phony.  We keep that
2063# information in a variable so we can use it in if_changed and friends.
2064.PHONY: $(PHONY)
v3.5.6
   1VERSION = 3
   2PATCHLEVEL = 5
   3SUBLEVEL = 6
 
   4EXTRAVERSION =
   5NAME = Saber-toothed Squirrel
   6
   7# *DOCUMENTATION*
   8# To see a list of typical targets execute "make help"
   9# More info can be located in ./README
  10# Comments in this file are targeted only to the developer, do not
  11# expect to learn how to build the kernel reading this file.
  12
  13# Do not:
  14# o  use make's built-in rules and variables
  15#    (this increases performance and avoids hard-to-debug behaviour);
  16# o  print "Entering directory ...";
  17MAKEFLAGS += -rR --no-print-directory
 
  18
  19# Avoid funny character set dependencies
  20unexport LC_ALL
  21LC_COLLATE=C
  22LC_NUMERIC=C
  23export LC_COLLATE LC_NUMERIC
  24
  25# We are using a recursive build, so we need to do a little thinking
  26# to get the ordering right.
  27#
  28# Most importantly: sub-Makefiles should only ever modify files in
  29# their own directory. If in some directory we have a dependency on
  30# a file in another dir (which doesn't happen often, but it's often
  31# unavoidable when linking the built-in.o targets which finally
  32# turn into vmlinux), we will call a sub make in that other dir, and
  33# after that we are sure that everything which is in that other dir
  34# is now up to date.
  35#
  36# The only cases where we need to modify files which have global
  37# effects are thus separated out and done before the recursive
  38# descending is started. They are now explicitly listed as the
  39# prepare rule.
  40
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  41# To put more focus on warnings, be less verbose as default
  42# Use 'make V=1' to see the full commands
  43
  44ifeq ("$(origin V)", "command line")
  45  KBUILD_VERBOSE = $(V)
  46endif
  47ifndef KBUILD_VERBOSE
  48  KBUILD_VERBOSE = 0
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  49endif
  50
 
 
  51# Call a source code checker (by default, "sparse") as part of the
  52# C compilation.
  53#
  54# Use 'make C=1' to enable checking of only re-compiled files.
  55# Use 'make C=2' to enable checking of *all* source files, regardless
  56# of whether they are re-compiled or not.
  57#
  58# See the file "Documentation/sparse.txt" for more details, including
  59# where to get the "sparse" utility.
  60
  61ifeq ("$(origin C)", "command line")
  62  KBUILD_CHECKSRC = $(C)
  63endif
  64ifndef KBUILD_CHECKSRC
  65  KBUILD_CHECKSRC = 0
  66endif
  67
  68# Use make M=dir to specify directory of external module to build
  69# Old syntax make ... SUBDIRS=$PWD is still supported
  70# Setting the environment variable KBUILD_EXTMOD take precedence
  71ifdef SUBDIRS
  72  KBUILD_EXTMOD ?= $(SUBDIRS)
 
 
  73endif
  74
 
 
 
 
  75ifeq ("$(origin M)", "command line")
  76  KBUILD_EXTMOD := $(M)
  77endif
  78
  79# kbuild supports saving output files in a separate directory.
  80# To locate output files in a separate directory two syntaxes are supported.
  81# In both cases the working directory must be the root of the kernel src.
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  82# 1) O=
  83# Use "make O=dir/to/store/output/files/"
  84#
  85# 2) Set KBUILD_OUTPUT
  86# Set the environment variable KBUILD_OUTPUT to point to the directory
  87# where the output files shall be placed.
  88# export KBUILD_OUTPUT=dir/to/store/output/files/
  89# make
  90#
  91# The O= assignment takes precedence over the KBUILD_OUTPUT environment
  92# variable.
  93
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  94
  95# KBUILD_SRC is set on invocation of make in OBJ directory
  96# KBUILD_SRC is not intended to be used by the regular user (for now)
  97ifeq ($(KBUILD_SRC),)
  98
  99# OK, Make called in directory where kernel src resides
 100# Do we want to locate output files in a separate directory?
 101ifeq ("$(origin O)", "command line")
 102  KBUILD_OUTPUT := $(O)
 
 
 
 
 103endif
 104
 105ifeq ("$(origin W)", "command line")
 106  export KBUILD_ENABLE_EXTRA_GCC_CHECKS := $(W)
 
 
 
 107endif
 108
 109# That's our default target when none is given on the command line
 110PHONY := _all
 111_all:
 112
 113# Cancel implicit rules on top Makefile
 114$(CURDIR)/Makefile Makefile: ;
 115
 116ifneq ($(KBUILD_OUTPUT),)
 117# Invoke a second make in the output directory, passing relevant variables
 118# check that the output directory actually exists
 119saved-output := $(KBUILD_OUTPUT)
 120KBUILD_OUTPUT := $(shell cd $(KBUILD_OUTPUT) && /bin/pwd)
 121$(if $(KBUILD_OUTPUT),, \
 122     $(error output directory "$(saved-output)" does not exist))
 123
 124PHONY += $(MAKECMDGOALS) sub-make
 125
 126$(filter-out _all sub-make $(CURDIR)/Makefile, $(MAKECMDGOALS)) _all: sub-make
 127	$(Q)@:
 128
 129sub-make: FORCE
 130	$(if $(KBUILD_VERBOSE:1=),@)$(MAKE) -C $(KBUILD_OUTPUT) \
 131	KBUILD_SRC=$(CURDIR) \
 132	KBUILD_EXTMOD="$(KBUILD_EXTMOD)" -f $(CURDIR)/Makefile \
 133	$(filter-out _all sub-make,$(MAKECMDGOALS))
 134
 135# Leave processing to above invocation of make
 136skip-makefile := 1
 137endif # ifneq ($(KBUILD_OUTPUT),)
 138endif # ifeq ($(KBUILD_SRC),)
 139
 140# We process the rest of the Makefile if this is the final invocation of make
 141ifeq ($(skip-makefile),)
 142
 143# If building an external module we do not care about the all: rule
 144# but instead _all depend on modules
 145PHONY += all
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 146ifeq ($(KBUILD_EXTMOD),)
 147_all: all
 148else
 149_all: modules
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 150endif
 151
 152srctree		:= $(if $(KBUILD_SRC),$(KBUILD_SRC),$(CURDIR))
 153objtree		:= $(CURDIR)
 154src		:= $(srctree)
 155obj		:= $(objtree)
 
 
 
 
 
 156
 157VPATH		:= $(srctree)$(if $(KBUILD_EXTMOD),:$(KBUILD_EXTMOD))
 
 
 
 
 158
 159export srctree objtree VPATH
 160
 
 161
 162# SUBARCH tells the usermode build what the underlying arch is.  That is set
 163# first, and if a usermode build is happening, the "ARCH=um" on the command
 164# line overrides the setting of ARCH below.  If a native build is happening,
 165# then ARCH is assigned, getting whatever value it gets normally, and 
 166# SUBARCH is subsequently ignored.
 167
 168SUBARCH := $(shell uname -m | sed -e s/i.86/i386/ -e s/sun4u/sparc64 \
 169				  -e s/arm.*/arm/ -e s/sa110/arm/ \
 170				  -e s/s390x/s390/ -e s/parisc64/parisc/ \
 171				  -e s/ppc.*/powerpc/ -e s/mips.*/mips/ \
 172				  -e s/sh[234].*/sh/ )
 173
 174# Cross compiling and selecting different set of gcc/bin-utils
 175# ---------------------------------------------------------------------------
 176#
 177# When performing cross compilation for other architectures ARCH shall be set
 178# to the target architecture. (See arch/* for the possibilities).
 179# ARCH can be set during invocation of make:
 180# make ARCH=ia64
 181# Another way is to have ARCH set in the environment.
 182# The default ARCH is the host where make is executed.
 183
 184# CROSS_COMPILE specify the prefix used for all executables used
 185# during compilation. Only gcc and related bin-utils executables
 186# are prefixed with $(CROSS_COMPILE).
 187# CROSS_COMPILE can be set on the command line
 188# make CROSS_COMPILE=ia64-linux-
 189# Alternatively CROSS_COMPILE can be set in the environment.
 190# A third alternative is to store a setting in .config so that plain
 191# "make" in the configured kernel build directory always uses that.
 192# Default value for CROSS_COMPILE is not to prefix executables
 193# Note: Some architectures assign CROSS_COMPILE in their arch/*/Makefile
 194export KBUILD_BUILDHOST := $(SUBARCH)
 195ARCH		?= $(SUBARCH)
 196CROSS_COMPILE	?= $(CONFIG_CROSS_COMPILE:"%"=%)
 197
 198# Architecture as present in compile.h
 199UTS_MACHINE 	:= $(ARCH)
 200SRCARCH 	:= $(ARCH)
 201
 202# Additional ARCH settings for x86
 203ifeq ($(ARCH),i386)
 204        SRCARCH := x86
 205endif
 206ifeq ($(ARCH),x86_64)
 207        SRCARCH := x86
 208endif
 209
 210# Additional ARCH settings for sparc
 211ifeq ($(ARCH),sparc32)
 212       SRCARCH := sparc
 213endif
 214ifeq ($(ARCH),sparc64)
 215       SRCARCH := sparc
 216endif
 217
 218# Additional ARCH settings for sh
 219ifeq ($(ARCH),sh64)
 220       SRCARCH := sh
 221endif
 222
 223# Additional ARCH settings for tile
 224ifeq ($(ARCH),tilepro)
 225       SRCARCH := tile
 226endif
 227ifeq ($(ARCH),tilegx)
 228       SRCARCH := tile
 229endif
 230
 231# Where to locate arch specific headers
 232hdr-arch  := $(SRCARCH)
 233
 234KCONFIG_CONFIG	?= .config
 235export KCONFIG_CONFIG
 236
 237# SHELL used by kbuild
 238CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
 239	  else if [ -x /bin/bash ]; then echo /bin/bash; \
 240	  else echo sh; fi ; fi)
 241
 242HOSTCC       = gcc
 243HOSTCXX      = g++
 244HOSTCFLAGS   = -Wall -Wmissing-prototypes -Wstrict-prototypes -O2 -fomit-frame-pointer
 245HOSTCXXFLAGS = -O2
 246
 247# Decide whether to build built-in, modular, or both.
 248# Normally, just do built-in.
 249
 250KBUILD_MODULES :=
 251KBUILD_BUILTIN := 1
 252
 253#	If we have only "make modules", don't compile built-in objects.
 254#	When we're building modules with modversions, we need to consider
 255#	the built-in objects during the descend as well, in order to
 256#	make sure the checksums are up to date before we record them.
 257
 258ifeq ($(MAKECMDGOALS),modules)
 259  KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1)
 260endif
 261
 262#	If we have "make <whatever> modules", compile modules
 263#	in addition to whatever we do anyway.
 264#	Just "make" or "make all" shall build modules as well
 265
 266ifneq ($(filter all _all modules,$(MAKECMDGOALS)),)
 267  KBUILD_MODULES := 1
 268endif
 269
 270ifeq ($(MAKECMDGOALS),)
 271  KBUILD_MODULES := 1
 272endif
 273
 274export KBUILD_MODULES KBUILD_BUILTIN
 275export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD
 276
 277# Beautify output
 278# ---------------------------------------------------------------------------
 279#
 280# Normally, we echo the whole command before executing it. By making
 281# that echo $($(quiet)$(cmd)), we now have the possibility to set
 282# $(quiet) to choose other forms of output instead, e.g.
 283#
 284#         quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@
 285#         cmd_cc_o_c       = $(CC) $(c_flags) -c -o $@ $<
 286#
 287# If $(quiet) is empty, the whole command will be printed.
 288# If it is set to "quiet_", only the short version will be printed. 
 289# If it is set to "silent_", nothing will be printed at all, since
 290# the variable $(silent_cmd_cc_o_c) doesn't exist.
 291#
 292# A simple variant is to prefix commands with $(Q) - that's useful
 293# for commands that shall be hidden in non-verbose mode.
 294#
 295#	$(Q)ln $@ :<
 296#
 297# If KBUILD_VERBOSE equals 0 then the above command will be hidden.
 298# If KBUILD_VERBOSE equals 1 then the above command is displayed.
 299
 300ifeq ($(KBUILD_VERBOSE),1)
 301  quiet =
 302  Q =
 303else
 304  quiet=quiet_
 305  Q = @
 306endif
 307
 308# If the user is running make -s (silent mode), suppress echoing of
 309# commands
 310
 311ifneq ($(filter s% -s%,$(MAKEFLAGS)),)
 312  quiet=silent_
 313endif
 
 
 314
 315export quiet Q KBUILD_VERBOSE
 316
 317
 318# Look for make include files relative to root of kernel src
 319MAKEFLAGS += --include-dir=$(srctree)
 320
 321# We need some generic definitions (do not try to remake the file).
 322$(srctree)/scripts/Kbuild.include: ;
 323include $(srctree)/scripts/Kbuild.include
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 324
 325# Make variables (CC, etc...)
 326
 327AS		= $(CROSS_COMPILE)as
 
 
 
 
 
 
 
 
 
 
 328LD		= $(CROSS_COMPILE)ld
 329CC		= $(CROSS_COMPILE)gcc
 330CPP		= $(CC) -E
 331AR		= $(CROSS_COMPILE)ar
 332NM		= $(CROSS_COMPILE)nm
 333STRIP		= $(CROSS_COMPILE)strip
 334OBJCOPY		= $(CROSS_COMPILE)objcopy
 335OBJDUMP		= $(CROSS_COMPILE)objdump
 
 
 
 
 
 
 
 
 
 
 
 
 
 336AWK		= awk
 337GENKSYMS	= scripts/genksyms/genksyms
 338INSTALLKERNEL  := installkernel
 339DEPMOD		= /sbin/depmod
 340PERL		= perl
 
 341CHECK		= sparse
 
 
 
 
 
 
 
 
 342
 343CHECKFLAGS     := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \
 344		  -Wbitwise -Wno-return-void $(CF)
 
 345CFLAGS_MODULE   =
 
 346AFLAGS_MODULE   =
 347LDFLAGS_MODULE  =
 348CFLAGS_KERNEL	=
 
 349AFLAGS_KERNEL	=
 350CFLAGS_GCOV	= -fprofile-arcs -ftest-coverage
 351
 
 
 
 
 
 
 
 
 352
 353# Use LINUXINCLUDE when you must reference the include/ directory.
 354# Needed to be compatible with the O= option
 355LINUXINCLUDE    := -I$(srctree)/arch/$(hdr-arch)/include \
 356                   -Iarch/$(hdr-arch)/include/generated -Iinclude \
 357                   $(if $(KBUILD_SRC), -I$(srctree)/include) \
 358                   -include $(srctree)/include/linux/kconfig.h
 
 
 
 
 
 
 
 
 
 
 
 
 359
 360KBUILD_CPPFLAGS := -D__KERNEL__
 
 
 
 
 
 
 
 
 361
 362KBUILD_CFLAGS   := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
 363		   -fno-strict-aliasing -fno-common \
 364		   -Werror-implicit-function-declaration \
 365		   -Wno-format-security \
 366		   -fno-delete-null-pointer-checks
 367KBUILD_AFLAGS_KERNEL :=
 368KBUILD_CFLAGS_KERNEL :=
 369KBUILD_AFLAGS   := -D__ASSEMBLY__
 370KBUILD_AFLAGS_MODULE  := -DMODULE
 371KBUILD_CFLAGS_MODULE  := -DMODULE
 372KBUILD_LDFLAGS_MODULE := -T $(srctree)/scripts/module-common.lds
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 373
 374# Read KERNELRELEASE from include/config/kernel.release (if it exists)
 375KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null)
 376KERNELVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
 377
 378export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION
 379export ARCH SRCARCH CONFIG_SHELL HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC
 380export CPP AR NM STRIP OBJCOPY OBJDUMP
 381export MAKE AWK GENKSYMS INSTALLKERNEL PERL UTS_MACHINE
 382export HOSTCXX HOSTCXXFLAGS LDFLAGS_MODULE CHECK CHECKFLAGS
 
 
 
 383
 384export KBUILD_CPPFLAGS NOSTDINC_FLAGS LINUXINCLUDE OBJCOPYFLAGS LDFLAGS
 385export KBUILD_CFLAGS CFLAGS_KERNEL CFLAGS_MODULE CFLAGS_GCOV
 
 386export KBUILD_AFLAGS AFLAGS_KERNEL AFLAGS_MODULE
 387export KBUILD_AFLAGS_MODULE KBUILD_CFLAGS_MODULE KBUILD_LDFLAGS_MODULE
 388export KBUILD_AFLAGS_KERNEL KBUILD_CFLAGS_KERNEL
 389export KBUILD_ARFLAGS
 390
 391# When compiling out-of-tree modules, put MODVERDIR in the module
 392# tree rather than in the kernel tree. The kernel tree might
 393# even be read-only.
 394export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_versions
 395
 396# Files to ignore in find ... statements
 397
 398RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o -name CVS \
 399		   -o -name .pc -o -name .hg -o -name .git \) -prune -o
 400export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn \
 401			 --exclude CVS --exclude .pc --exclude .hg --exclude .git
 402
 403# ===========================================================================
 404# Rules shared between *config targets and build targets
 405
 406# Basic helpers built in scripts
 407PHONY += scripts_basic
 408scripts_basic:
 409	$(Q)$(MAKE) $(build)=scripts/basic
 410	$(Q)rm -f .tmp_quiet_recordmcount
 411
 412# To avoid any implicit rule to kick in, define an empty command.
 413scripts/basic/%: scripts_basic ;
 414
 415PHONY += outputmakefile
 
 
 416# outputmakefile generates a Makefile in the output directory, if using a
 417# separate output directory. This allows convenient use of make in the
 418# output directory.
 
 
 
 
 
 
 
 
 
 419outputmakefile:
 420ifneq ($(KBUILD_SRC),)
 
 
 
 
 
 
 
 
 421	$(Q)ln -fsn $(srctree) source
 422	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile \
 423	    $(srctree) $(objtree) $(VERSION) $(PATCHLEVEL)
 
 424endif
 425
 426# Support for using generic headers in asm-generic
 427PHONY += asm-generic
 428asm-generic:
 429	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.asm-generic \
 430	            obj=arch/$(SRCARCH)/include/generated/asm
 431
 432# To make sure we do not include .config for any of the *config targets
 433# catch them early, and hand them over to scripts/kconfig/Makefile
 434# It is allowed to specify more targets when calling make, including
 435# mixing *config targets and build targets.
 436# For example 'make oldconfig all'.
 437# Detect when mixed targets is specified, and make a second invocation
 438# of make so .config is not included in this case either (for *config).
 439
 440no-dot-config-targets := clean mrproper distclean \
 441			 cscope gtags TAGS tags help %docs check% coccicheck \
 442			 include/linux/version.h headers_% archheaders archscripts \
 443			 kernelversion %src-pkg
 444
 445config-targets := 0
 446mixed-targets  := 0
 447dot-config     := 1
 448
 449ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),)
 450	ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),)
 451		dot-config := 0
 452	endif
 453endif
 454
 455ifeq ($(KBUILD_EXTMOD),)
 456        ifneq ($(filter config %config,$(MAKECMDGOALS)),)
 457                config-targets := 1
 458                ifneq ($(filter-out config %config,$(MAKECMDGOALS)),)
 459                        mixed-targets := 1
 460                endif
 461        endif
 462endif
 463
 464ifeq ($(mixed-targets),1)
 465# ===========================================================================
 466# We're called with mixed targets (*config and build targets).
 467# Handle them one by one.
 468
 469%:: FORCE
 470	$(Q)$(MAKE) -C $(srctree) KBUILD_SRC= $@
 471
 472else
 473ifeq ($(config-targets),1)
 474# ===========================================================================
 475# *config targets only - make sure prerequisites are updated, and descend
 476# in scripts/kconfig to make the *config target
 477
 478# Read arch specific Makefile to set KBUILD_DEFCONFIG as needed.
 479# KBUILD_DEFCONFIG may point out an alternative default configuration
 480# used for 'make defconfig'
 481include $(srctree)/arch/$(SRCARCH)/Makefile
 482export KBUILD_DEFCONFIG KBUILD_KCONFIG
 483
 484config: scripts_basic outputmakefile FORCE
 485	$(Q)mkdir -p include/linux include/config
 486	$(Q)$(MAKE) $(build)=scripts/kconfig $@
 487
 488%config: scripts_basic outputmakefile FORCE
 489	$(Q)mkdir -p include/linux include/config
 490	$(Q)$(MAKE) $(build)=scripts/kconfig $@
 491
 492else
 493# ===========================================================================
 494# Build targets only - this includes vmlinux, arch specific targets, clean
 495# targets and others. In general all targets except *config targets.
 496
 
 
 
 497ifeq ($(KBUILD_EXTMOD),)
 498# Additional helpers built in scripts
 499# Carefully list dependencies so we do not try to build scripts twice
 500# in parallel
 501PHONY += scripts
 502scripts: scripts_basic include/config/auto.conf include/config/tristate.conf
 503	$(Q)$(MAKE) $(build)=$(@)
 
 
 
 
 
 
 
 
 
 
 
 504
 505# Objects we will link into vmlinux / subdirs we need to visit
 506init-y		:= init
 507drivers-y	:= drivers sound firmware
 508net-y		:= net
 509libs-y		:= lib
 510core-y		:= usr
 511endif # KBUILD_EXTMOD
 512
 513ifeq ($(dot-config),1)
 514# Read in config
 515-include include/config/auto.conf
 516
 517ifeq ($(KBUILD_EXTMOD),)
 518# Read in dependencies to all Kconfig* files, make sure to run
 519# oldconfig if changes are detected.
 520-include include/config/auto.conf.cmd
 521
 522# To avoid any implicit rule to kick in, define an empty command
 523$(KCONFIG_CONFIG) include/config/auto.conf.cmd: ;
 524
 525# If .config is newer than include/config/auto.conf, someone tinkered
 526# with it and forgot to run make oldconfig.
 527# if auto.conf.cmd is missing then we are probably in a cleaned tree so
 528# we execute the config step to be sure to catch updated Kconfig files
 529include/config/%.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd
 530	$(Q)$(MAKE) -f $(srctree)/Makefile silentoldconfig
 531else
 532# external modules needs include/generated/autoconf.h and include/config/auto.conf
 533# but do not care if they are up-to-date. Use auto.conf to trigger the test
 534PHONY += include/config/auto.conf
 535
 536include/config/auto.conf:
 537	$(Q)test -e include/generated/autoconf.h -a -e $@ || (		\
 538	echo;								\
 539	echo "  ERROR: Kernel configuration is invalid.";		\
 540	echo "         include/generated/autoconf.h or $@ are missing.";\
 541	echo "         Run 'make oldconfig && make prepare' on kernel src to fix it.";	\
 542	echo;								\
 543	/bin/false)
 544
 
 
 
 
 
 545endif # KBUILD_EXTMOD
 546
 547else
 548# Dummy target needed, because used as prerequisite
 549include/config/auto.conf: ;
 550endif # $(dot-config)
 551
 552# The all: target is the default when no target is given on the
 553# command line.
 554# This allow a user to issue only 'make' to build a kernel including modules
 555# Defaults to vmlinux, but the arch makefile usually adds further targets
 556all: vmlinux
 557
 558ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
 559KBUILD_CFLAGS	+= -Os
 560else
 561KBUILD_CFLAGS	+= -O2
 
 
 
 
 
 562endif
 563
 564include $(srctree)/arch/$(SRCARCH)/Makefile
 565
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 566ifdef CONFIG_READABLE_ASM
 567# Disable optimizations that make assembler listings hard to read.
 568# reorder blocks reorders the control in the function
 569# ipa clone creates specialized cloned functions
 570# partial inlining inlines only parts of functions
 571KBUILD_CFLAGS += $(call cc-option,-fno-reorder-blocks,) \
 572                 $(call cc-option,-fno-ipa-cp-clone,) \
 573                 $(call cc-option,-fno-partial-inlining)
 574endif
 575
 576ifneq ($(CONFIG_FRAME_WARN),0)
 577KBUILD_CFLAGS += $(call cc-option,-Wframe-larger-than=${CONFIG_FRAME_WARN})
 578endif
 579
 580# Force gcc to behave correct even for buggy distributions
 581ifndef CONFIG_CC_STACKPROTECTOR
 582KBUILD_CFLAGS += $(call cc-option, -fno-stack-protector)
 583endif
 584
 585# This warning generated too much noise in a regular build.
 586# Use make W=1 to enable this warning (see scripts/Makefile.build)
 587KBUILD_CFLAGS += $(call cc-disable-warning, unused-but-set-variable)
 588
 589ifdef CONFIG_FRAME_POINTER
 590KBUILD_CFLAGS	+= -fno-omit-frame-pointer -fno-optimize-sibling-calls
 
 591else
 592# Some targets (ARM with Thumb2, for example), can't be built with frame
 593# pointers.  For those, we don't have FUNCTION_TRACER automatically
 594# select FRAME_POINTER.  However, FUNCTION_TRACER adds -pg, and this is
 595# incompatible with -fomit-frame-pointer with current GCC, so we don't use
 596# -fomit-frame-pointer with FUNCTION_TRACER.
 
 
 597ifndef CONFIG_FUNCTION_TRACER
 598KBUILD_CFLAGS	+= -fomit-frame-pointer
 599endif
 600endif
 601
 602ifdef CONFIG_DEBUG_INFO
 603KBUILD_CFLAGS	+= -g
 604KBUILD_AFLAGS	+= -gdwarf-2
 
 
 
 
 
 
 
 
 
 
 
 605endif
 606
 607ifdef CONFIG_DEBUG_INFO_REDUCED
 608KBUILD_CFLAGS 	+= $(call cc-option, -femit-struct-debug-baseonly)
 
 
 
 
 
 609endif
 610
 611ifdef CONFIG_FUNCTION_TRACER
 612KBUILD_CFLAGS	+= -pg
 613ifdef CONFIG_DYNAMIC_FTRACE
 614	ifdef CONFIG_HAVE_C_RECORDMCOUNT
 615		BUILD_C_RECORDMCOUNT := y
 616		export BUILD_C_RECORDMCOUNT
 617	endif
 618endif
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 619endif
 620
 621# We trigger additional mismatches with less inlining
 622ifdef CONFIG_DEBUG_SECTION_MISMATCH
 623KBUILD_CFLAGS += $(call cc-option, -fno-inline-functions-called-once)
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 624endif
 625
 626# arch Makefile may override CC so keep this after arch Makefile is included
 627NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
 628CHECKFLAGS     += $(NOSTDINC_FLAGS)
 629
 630# warn about C99 declaration after statement
 631KBUILD_CFLAGS += $(call cc-option,-Wdeclaration-after-statement,)
 
 
 
 
 
 
 
 632
 633# disable pointer signed / unsigned warnings in gcc 4.0
 634KBUILD_CFLAGS += $(call cc-disable-warning, pointer-sign)
 635
 636# disable invalid "can't wrap" optimizations for signed / pointers
 637KBUILD_CFLAGS	+= $(call cc-option,-fno-strict-overflow)
 638
 639# conserve stack if available
 640KBUILD_CFLAGS   += $(call cc-option,-fconserve-stack)
 
 
 641
 642# use the deterministic mode of AR if available
 643KBUILD_ARFLAGS := $(call ar-option,D)
 644
 645# check for 'asm goto'
 646ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-goto.sh $(CC)), y)
 647	KBUILD_CFLAGS += -DCC_HAVE_ASM_GOTO
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 648endif
 649
 650# Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments
 651# But warn user when we do so
 652warn-assign = \
 653$(warning "WARNING: Appending $$K$(1) ($(K$(1))) from $(origin K$(1)) to kernel $$$(1)")
 654
 655ifneq ($(KCPPFLAGS),)
 656        $(call warn-assign,CPPFLAGS)
 657        KBUILD_CPPFLAGS += $(KCPPFLAGS)
 658endif
 659ifneq ($(KAFLAGS),)
 660        $(call warn-assign,AFLAGS)
 661        KBUILD_AFLAGS += $(KAFLAGS)
 662endif
 663ifneq ($(KCFLAGS),)
 664        $(call warn-assign,CFLAGS)
 665        KBUILD_CFLAGS += $(KCFLAGS)
 666endif
 667
 668# Use --build-id when available.
 669LDFLAGS_BUILD_ID = $(patsubst -Wl$(comma)%,%,\
 670			      $(call cc-ldoption, -Wl$(comma)--build-id,))
 671KBUILD_LDFLAGS_MODULE += $(LDFLAGS_BUILD_ID)
 672LDFLAGS_vmlinux += $(LDFLAGS_BUILD_ID)
 
 
 
 
 673
 674ifeq ($(CONFIG_STRIP_ASM_SYMS),y)
 675LDFLAGS_vmlinux	+= $(call ld-option, -X,)
 676endif
 677
 678# Default kernel image to build when no specific target is given.
 679# KBUILD_IMAGE may be overruled on the command line or
 680# set in the environment
 681# Also any assignments in arch/$(ARCH)/Makefile take precedence over
 682# this default value
 683export KBUILD_IMAGE ?= vmlinux
 684
 685#
 686# INSTALL_PATH specifies where to place the updated kernel and system map
 687# images. Default is /boot, but you can set it to other values
 688export	INSTALL_PATH ?= /boot
 689
 690#
 
 
 
 
 
 
 
 691# INSTALL_MOD_PATH specifies a prefix to MODLIB for module directory
 692# relocations required by build roots.  This is not defined in the
 693# makefile but the argument can be passed to make if needed.
 694#
 695
 696MODLIB	= $(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE)
 697export MODLIB
 698
 699#
 700#  INSTALL_MOD_STRIP, if defined, will cause modules to be
 701#  stripped after they are installed.  If INSTALL_MOD_STRIP is '1', then
 702#  the default option --strip-debug will be used.  Otherwise,
 703#  INSTALL_MOD_STRIP value will be used as the options to the strip command.
 704
 705ifdef INSTALL_MOD_STRIP
 706ifeq ($(INSTALL_MOD_STRIP),1)
 707mod_strip_cmd = $(STRIP) --strip-debug
 708else
 709mod_strip_cmd = $(STRIP) $(INSTALL_MOD_STRIP)
 710endif # INSTALL_MOD_STRIP=1
 711else
 712mod_strip_cmd = true
 713endif # INSTALL_MOD_STRIP
 714export mod_strip_cmd
 715
 
 
 
 716
 717ifeq ($(KBUILD_EXTMOD),)
 718core-y		+= kernel mm fs ipc security crypto block
 719
 720vmlinux-dirs	:= $(patsubst %/,%,$(filter %/, $(init-y) $(init-m) \
 721		     $(core-y) $(core-m) $(drivers-y) $(drivers-m) \
 722		     $(net-y) $(net-m) $(libs-y) $(libs-m)))
 723
 724vmlinux-alldirs	:= $(sort $(vmlinux-dirs) $(patsubst %/,%,$(filter %/, \
 725		     $(init-n) $(init-) \
 726		     $(core-n) $(core-) $(drivers-n) $(drivers-) \
 727		     $(net-n)  $(net-)  $(libs-n)    $(libs-))))
 728
 729init-y		:= $(patsubst %/, %/built-in.o, $(init-y))
 730core-y		:= $(patsubst %/, %/built-in.o, $(core-y))
 731drivers-y	:= $(patsubst %/, %/built-in.o, $(drivers-y))
 732net-y		:= $(patsubst %/, %/built-in.o, $(net-y))
 733libs-y1		:= $(patsubst %/, %/lib.a, $(libs-y))
 734libs-y2		:= $(patsubst %/, %/built-in.o, $(libs-y))
 735libs-y		:= $(libs-y1) $(libs-y2)
 736
 
 
 
 
 
 
 
 
 737# Externally visible symbols (used by link-vmlinux.sh)
 738export KBUILD_VMLINUX_INIT := $(head-y) $(init-y)
 739export KBUILD_VMLINUX_MAIN := $(core-y) $(libs-y) $(drivers-y) $(net-y)
 740export KBUILD_LDS          := arch/$(SRCARCH)/kernel/vmlinux.lds
 741export LDFLAGS_vmlinux
 742
 743vmlinux-deps := $(KBUILD_LDS) $(KBUILD_VMLINUX_INIT) $(KBUILD_VMLINUX_MAIN)
 
 
 
 
 
 
 744
 745# Final link of vmlinux
 746      cmd_link-vmlinux = $(CONFIG_SHELL) $< $(LD) $(LDFLAGS) $(LDFLAGS_vmlinux)
 747quiet_cmd_link-vmlinux = LINK    $@
 748
 749# Include targets which we want to
 750# execute if the rest of the kernel build went well.
 751vmlinux: scripts/link-vmlinux.sh $(vmlinux-deps) FORCE
 752ifdef CONFIG_HEADERS_CHECK
 753	$(Q)$(MAKE) -f $(srctree)/Makefile headers_check
 754endif
 755ifdef CONFIG_SAMPLES
 756	$(Q)$(MAKE) $(build)=samples
 757endif
 758ifdef CONFIG_BUILD_DOCSRC
 759	$(Q)$(MAKE) $(build)=Documentation
 760endif
 761	+$(call if_changed,link-vmlinux)
 762
 763# The actual objects are generated when descending, 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 764# make sure no implicit rule kicks in
 765$(sort $(vmlinux-deps)): $(vmlinux-dirs) ;
 766
 767# Handle descending into subdirectories listed in $(vmlinux-dirs)
 768# Preset locale variables to speed up the build process. Limit locale
 769# tweaks to this spot to avoid wrong language settings when running
 770# make menuconfig etc.
 771# Error messages still appears in the original language
 772
 773PHONY += $(vmlinux-dirs)
 774$(vmlinux-dirs): prepare scripts
 775	$(Q)$(MAKE) $(build)=$@
 776
 777# Store (new) KERNELRELASE string in include/config/kernel.release
 778include/config/kernel.release: include/config/auto.conf FORCE
 779	$(Q)rm -f $@
 780	$(Q)echo "$(KERNELVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))" > $@
 781
 
 
 
 
 
 
 782
 783# Things we need to do before we recursively start building the kernel
 784# or the modules are listed in "prepare".
 785# A multi level approach is used. prepareN is processed before prepareN-1.
 786# archprepare is used in arch Makefiles and when processed asm symlink,
 787# version.h and scripts_basic is processed / created.
 788
 789# Listed in dependency order
 790PHONY += prepare archprepare prepare0 prepare1 prepare2 prepare3
 791
 792# prepare3 is used to check if we are building in a separate output directory,
 793# and if so do:
 794# 1) Check that make has not been executed in the kernel src $(srctree)
 795prepare3: include/config/kernel.release
 796ifneq ($(KBUILD_SRC),)
 797	@$(kecho) '  Using $(srctree) as source for kernel'
 798	$(Q)if [ -f $(srctree)/.config -o -d $(srctree)/include/config ]; then \
 799		echo "  $(srctree) is not clean, please run 'make mrproper'"; \
 800		echo "  in the '$(srctree)' directory.";\
 801		/bin/false; \
 802	fi;
 803endif
 804
 805# prepare2 creates a makefile if using a separate output directory
 806prepare2: prepare3 outputmakefile asm-generic
 807
 808prepare1: prepare2 include/linux/version.h include/generated/utsrelease.h \
 809                   include/config/auto.conf
 810	$(cmd_crmodverdir)
 811
 812archprepare: archheaders archscripts prepare1 scripts_basic
 
 
 
 
 
 813
 814prepare0: archprepare FORCE
 815	$(Q)$(MAKE) $(build)=.
 
 816
 817# All the preparing..
 818prepare: prepare0
 
 
 
 
 
 
 
 
 819
 820# Generate some files
 821# ---------------------------------------------------------------------------
 822
 823# KERNELRELEASE can change from a few different places, meaning version.h
 824# needs to be updated, so this check is forced on all builds
 825
 826uts_len := 64
 827define filechk_utsrelease.h
 828	if [ `echo -n "$(KERNELRELEASE)" | wc -c ` -gt $(uts_len) ]; then \
 829	  echo '"$(KERNELRELEASE)" exceeds $(uts_len) characters' >&2;    \
 830	  exit 1;                                                         \
 831	fi;                                                               \
 832	(echo \#define UTS_RELEASE \"$(KERNELRELEASE)\";)
 833endef
 834
 835define filechk_version.h
 836	(echo \#define LINUX_VERSION_CODE $(shell                         \
 837	expr $(VERSION) \* 65536 + 0$(PATCHLEVEL) \* 256 + 0$(SUBLEVEL)); \
 838	echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))';)
 
 
 
 
 
 
 
 
 
 839endef
 840
 841include/linux/version.h: $(srctree)/Makefile FORCE
 
 
 842	$(call filechk,version.h)
 843
 844include/generated/utsrelease.h: include/config/kernel.release FORCE
 845	$(call filechk,utsrelease.h)
 846
 
 
 
 
 
 
 847PHONY += headerdep
 848headerdep:
 849	$(Q)find $(srctree)/include/ -name '*.h' | xargs --max-args 1 \
 850	$(srctree)/scripts/headerdep.pl -I$(srctree)/include
 851
 852# ---------------------------------------------------------------------------
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 853
 854PHONY += depend dep
 855depend dep:
 856	@echo '*** Warning: make $@ is unnecessary now.'
 857
 858# ---------------------------------------------------------------------------
 859# Firmware install
 860INSTALL_FW_PATH=$(INSTALL_MOD_PATH)/lib/firmware
 861export INSTALL_FW_PATH
 862
 863PHONY += firmware_install
 864firmware_install: FORCE
 865	@mkdir -p $(objtree)/firmware
 866	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.fwinst obj=firmware __fw_install
 
 
 
 
 
 
 
 
 
 867
 868# ---------------------------------------------------------------------------
 869# Kernel headers
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 870
 871#Default location for installed headers
 872export INSTALL_HDR_PATH = $(objtree)/usr
 873
 874hdr-inst := -rR -f $(srctree)/scripts/Makefile.headersinst obj
 
 875
 876# If we do an all arch process set dst to asm-$(hdr-arch)
 877hdr-dst = $(if $(KBUILD_HEADERS), dst=include/asm-$(hdr-arch), dst=include/asm)
 
 878
 879PHONY += archheaders
 880archheaders:
 881
 882PHONY += archscripts
 883archscripts:
 
 884
 885PHONY += __headers
 886__headers: include/linux/version.h scripts_basic asm-generic archheaders archscripts FORCE
 887	$(Q)$(MAKE) $(build)=scripts build_unifdef
 888
 889PHONY += headers_install_all
 890headers_install_all:
 891	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/headers.sh install
 892
 893PHONY += headers_install
 894headers_install: __headers
 895	$(if $(wildcard $(srctree)/arch/$(hdr-arch)/include/asm/Kbuild),, \
 896	$(error Headers not exportable for the $(SRCARCH) architecture))
 897	$(Q)$(MAKE) $(hdr-inst)=include
 898	$(Q)$(MAKE) $(hdr-inst)=arch/$(hdr-arch)/include/asm $(hdr-dst)
 899
 900PHONY += headers_check_all
 901headers_check_all: headers_install_all
 902	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/headers.sh check
 903
 904PHONY += headers_check
 905headers_check: headers_install
 906	$(Q)$(MAKE) $(hdr-inst)=include HDRCHECK=1
 907	$(Q)$(MAKE) $(hdr-inst)=arch/$(hdr-arch)/include/asm $(hdr-dst) HDRCHECK=1
 908
 909# ---------------------------------------------------------------------------
 910# Modules
 911
 912ifdef CONFIG_MODULES
 913
 914# By default, build modules as well
 915
 916all: modules
 917
 918#	Build modules
 
 
 
 
 
 
 
 919#
 920#	A module can be listed more than once in obj-m resulting in
 921#	duplicate lines in modules.order files.  Those are removed
 922#	using awk while concatenating to the final file.
 923
 924PHONY += modules
 925modules: $(vmlinux-dirs) $(if $(KBUILD_BUILTIN),vmlinux) modules.builtin
 926	$(Q)$(AWK) '!x[$$0]++' $(vmlinux-dirs:%=$(objtree)/%/modules.order) > $(objtree)/modules.order
 927	@$(kecho) '  Building modules, stage 2.';
 928	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
 929	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.fwinst obj=firmware __fw_modbuild
 930
 931modules.builtin: $(vmlinux-dirs:%=%/modules.builtin)
 932	$(Q)$(AWK) '!x[$$0]++' $^ > $(objtree)/modules.builtin
 933
 934%/modules.builtin: include/config/auto.conf
 935	$(Q)$(MAKE) $(modbuiltin)=$*
 
 936
 
 937
 938# Target to prepare building external modules
 939PHONY += modules_prepare
 940modules_prepare: prepare scripts
 941
 942# Target to install modules
 943PHONY += modules_install
 944modules_install: _modinst_ _modinst_post
 945
 946PHONY += _modinst_
 947_modinst_:
 948	@rm -rf $(MODLIB)/kernel
 949	@rm -f $(MODLIB)/source
 950	@mkdir -p $(MODLIB)/kernel
 951	@ln -s $(srctree) $(MODLIB)/source
 952	@if [ ! $(objtree) -ef  $(MODLIB)/build ]; then \
 953		rm -f $(MODLIB)/build ; \
 954		ln -s $(objtree) $(MODLIB)/build ; \
 955	fi
 956	@cp -f $(objtree)/modules.order $(MODLIB)/
 957	@cp -f $(objtree)/modules.builtin $(MODLIB)/
 958	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modinst
 959
 960# This depmod is only for convenience to give the initial
 961# boot a modules.dep even before / is mounted read-write.  However the
 962# boot script depmod is the master version.
 963PHONY += _modinst_post
 964_modinst_post: _modinst_
 965	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.fwinst obj=firmware __fw_modinst
 966	$(call cmd,depmod)
 967
 968else # CONFIG_MODULES
 969
 970# Modules not configured
 971# ---------------------------------------------------------------------------
 972
 973modules modules_install: FORCE
 974	@echo
 975	@echo "The present kernel configuration has modules disabled."
 976	@echo "Type 'make config' and enable loadable module support."
 977	@echo "Then build a kernel with module support enabled."
 978	@echo
 979	@exit 1
 980
 981endif # CONFIG_MODULES
 982
 983###
 984# Cleaning is done on three levels.
 985# make clean     Delete most generated files
 986#                Leave enough to build external modules
 987# make mrproper  Delete the current configuration, and all generated files
 988# make distclean Remove editor backup files, patch leftover files and the like
 989
 990# Directories & files removed with 'make clean'
 991CLEAN_DIRS  += $(MODVERDIR)
 
 
 
 992
 993# Directories & files removed with 'make mrproper'
 994MRPROPER_DIRS  += include/config usr/include include/generated          \
 995                  arch/*/include/generated
 996MRPROPER_FILES += .config .config.old .version .old_version             \
 997                  include/linux/version.h                               \
 998		  Module.symvers tags TAGS cscope* GPATH GTAGS GRTAGS GSYMS
 
 
 
 
 
 999
1000# clean - Delete most, but leave enough to build external modules
1001#
1002clean: rm-dirs  := $(CLEAN_DIRS)
1003clean: rm-files := $(CLEAN_FILES)
1004clean-dirs      := $(addprefix _clean_, . $(vmlinux-alldirs) Documentation samples)
1005
1006PHONY += $(clean-dirs) clean archclean
1007$(clean-dirs):
1008	$(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
 
 
1009
1010clean: archclean
1011
1012# mrproper - Delete all generated files, including .config
1013#
1014mrproper: rm-dirs  := $(wildcard $(MRPROPER_DIRS))
1015mrproper: rm-files := $(wildcard $(MRPROPER_FILES))
1016mrproper-dirs      := $(addprefix _mrproper_,Documentation/DocBook scripts)
1017
1018PHONY += $(mrproper-dirs) mrproper archmrproper
1019$(mrproper-dirs):
1020	$(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@)
1021
1022mrproper: clean archmrproper $(mrproper-dirs)
1023	$(call cmd,rmdirs)
1024	$(call cmd,rmfiles)
 
 
 
1025
1026# distclean
1027#
1028PHONY += distclean
1029
1030distclean: mrproper
1031	@find $(srctree) $(RCS_FIND_IGNORE) \
1032		\( -name '*.orig' -o -name '*.rej' -o -name '*~' \
1033		-o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \
1034		-o -name '.*.rej' \
1035		-o -name '*%' -o -name '.*.cmd' -o -name 'core' \) \
1036		-type f -print | xargs rm -f
1037
1038
1039# Packaging of the kernel to various formats
1040# ---------------------------------------------------------------------------
1041# rpm target kept for backward compatibility
1042package-dir	:= $(srctree)/scripts/package
1043
1044%src-pkg: FORCE
1045	$(Q)$(MAKE) $(build)=$(package-dir) $@
1046%pkg: include/config/kernel.release FORCE
1047	$(Q)$(MAKE) $(build)=$(package-dir) $@
1048rpm: include/config/kernel.release FORCE
1049	$(Q)$(MAKE) $(build)=$(package-dir) $@
1050
1051
1052# Brief documentation of the typical targets used
1053# ---------------------------------------------------------------------------
1054
1055boards := $(wildcard $(srctree)/arch/$(SRCARCH)/configs/*_defconfig)
1056boards := $(notdir $(boards))
1057board-dirs := $(dir $(wildcard $(srctree)/arch/$(SRCARCH)/configs/*/*_defconfig))
1058board-dirs := $(sort $(notdir $(board-dirs:/=)))
1059
 
1060help:
1061	@echo  'Cleaning targets:'
1062	@echo  '  clean		  - Remove most generated files but keep the config and'
1063	@echo  '                    enough build support to build external modules'
1064	@echo  '  mrproper	  - Remove all generated files + config + various backup files'
1065	@echo  '  distclean	  - mrproper + remove editor backup and patch files'
1066	@echo  ''
1067	@echo  'Configuration targets:'
1068	@$(MAKE) -f $(srctree)/scripts/kconfig/Makefile help
1069	@echo  ''
1070	@echo  'Other generic targets:'
1071	@echo  '  all		  - Build all targets marked with [*]'
1072	@echo  '* vmlinux	  - Build the bare kernel'
1073	@echo  '* modules	  - Build all modules'
1074	@echo  '  modules_install - Install all modules to INSTALL_MOD_PATH (default: /)'
1075	@echo  '  firmware_install- Install all firmware to INSTALL_FW_PATH'
1076	@echo  '                    (default: $$(INSTALL_MOD_PATH)/lib/firmware)'
1077	@echo  '  dir/            - Build all files in dir and below'
1078	@echo  '  dir/file.[oisS] - Build specified target only'
 
 
1079	@echo  '  dir/file.lst    - Build specified mixed source/assembly target only'
1080	@echo  '                    (requires a recent binutils and recent build (System.map))'
1081	@echo  '  dir/file.ko     - Build module including final link'
1082	@echo  '  modules_prepare - Set up for building external modules'
1083	@echo  '  tags/TAGS	  - Generate tags file for editors'
1084	@echo  '  cscope	  - Generate cscope index'
1085	@echo  '  gtags           - Generate GNU GLOBAL index'
1086	@echo  '  kernelrelease	  - Output the release version string'
1087	@echo  '  kernelversion	  - Output the version stored in Makefile'
 
1088	@echo  '  headers_install - Install sanitised kernel headers to INSTALL_HDR_PATH'; \
1089	 echo  '                    (default: $(INSTALL_HDR_PATH))'; \
1090	 echo  ''
1091	@echo  'Static analysers'
1092	@echo  '  checkstack      - Generate a list of stack hogs'
1093	@echo  '  namespacecheck  - Name space analysis on compiled kernel'
1094	@echo  '  versioncheck    - Sanity check on version.h usage'
1095	@echo  '  includecheck    - Check for duplicate included header files'
1096	@echo  '  export_report   - List the usages of all exported symbols'
1097	@echo  '  headers_check   - Sanity check on exported headers'
1098	@echo  '  headerdep       - Detect inclusion cycles in headers'
1099	@$(MAKE) -f $(srctree)/scripts/Makefile.help checker-help
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1100	@echo  ''
1101	@echo  'Kernel packaging:'
1102	@$(MAKE) $(build)=$(package-dir) help
1103	@echo  ''
1104	@echo  'Documentation targets:'
1105	@$(MAKE) -f $(srctree)/Documentation/DocBook/Makefile dochelp
1106	@echo  ''
1107	@echo  'Architecture specific targets ($(SRCARCH)):'
1108	@$(if $(archhelp),$(archhelp),\
1109		echo '  No architecture specific help defined for $(SRCARCH)')
1110	@echo  ''
1111	@$(if $(boards), \
1112		$(foreach b, $(boards), \
1113		printf "  %-24s - Build for %s\\n" $(b) $(subst _defconfig,,$(b));) \
1114		echo '')
1115	@$(if $(board-dirs), \
1116		$(foreach b, $(board-dirs), \
1117		printf "  %-16s - Show %s-specific targets\\n" help-$(b) $(b);) \
1118		printf "  %-16s - Show all of the above\\n" help-boards; \
1119		echo '')
1120
1121	@echo  '  make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build'
1122	@echo  '  make V=2   [targets] 2 => give reason for rebuild of target'
 
1123	@echo  '  make O=dir [targets] Locate all output files in "dir", including .config'
1124	@echo  '  make C=1   [targets] Check all c source with $$CHECK (sparse by default)'
 
1125	@echo  '  make C=2   [targets] Force check of all c source with $$CHECK'
1126	@echo  '  make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections'
1127	@echo  '  make W=n   [targets] Enable extra gcc checks, n=1,2,3 where'
1128	@echo  '		1: warnings which may be relevant and do not occur too often'
1129	@echo  '		2: warnings which occur quite often but may still be relevant'
1130	@echo  '		3: more obscure warnings, can most likely be ignored'
 
 
1131	@echo  '		Multiple levels can be combined with W=12 or W=123'
 
 
 
 
1132	@echo  ''
1133	@echo  'Execute "make" or "make all" to build all targets marked with [*] '
1134	@echo  'For further info see the ./README file'
1135
1136
1137help-board-dirs := $(addprefix help-,$(board-dirs))
1138
1139help-boards: $(help-board-dirs)
1140
1141boards-per-dir = $(notdir $(wildcard $(srctree)/arch/$(SRCARCH)/configs/$*/*_defconfig))
1142
1143$(help-board-dirs): help-%:
1144	@echo  'Architecture specific targets ($(SRCARCH) $*):'
1145	@$(if $(boards-per-dir), \
1146		$(foreach b, $(boards-per-dir), \
1147		printf "  %-24s - Build for %s\\n" $*/$(b) $(subst _defconfig,,$(b));) \
1148		echo '')
1149
1150
1151# Documentation targets
1152# ---------------------------------------------------------------------------
1153%docs: scripts_basic FORCE
1154	$(Q)$(MAKE) $(build)=scripts build_docproc
1155	$(Q)$(MAKE) $(build)=Documentation/DocBook $@
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1156
1157else # KBUILD_EXTMOD
1158
 
 
1159###
1160# External module support.
1161# When building external modules the kernel used as basis is considered
1162# read-only, and no consistency checks are made and the make
1163# system is not used on the basis kernel. If updates are required
1164# in the basis kernel ordinary make commands (without M=...) must
1165# be used.
1166#
1167# The following are the only valid targets when building external
1168# modules.
1169# make M=dir clean     Delete all automatically generated files
1170# make M=dir modules   Make all modules in specified dir
1171# make M=dir	       Same as 'make M=dir modules'
1172# make M=dir modules_install
1173#                      Install the modules built in the module directory
1174#                      Assumes install directory is already created
1175
1176# We are always building modules
 
1177KBUILD_MODULES := 1
1178PHONY += crmodverdir
1179crmodverdir:
1180	$(cmd_crmodverdir)
1181
1182PHONY += $(objtree)/Module.symvers
1183$(objtree)/Module.symvers:
1184	@test -e $(objtree)/Module.symvers || ( \
1185	echo; \
1186	echo "  WARNING: Symbol version dump $(objtree)/Module.symvers"; \
1187	echo "           is missing; modules will have no dependencies and modversions."; \
1188	echo )
1189
1190module-dirs := $(addprefix _module_,$(KBUILD_EXTMOD))
1191PHONY += $(module-dirs) modules
1192$(module-dirs): crmodverdir $(objtree)/Module.symvers
1193	$(Q)$(MAKE) $(build)=$(patsubst _module_%,%,$@)
1194
1195modules: $(module-dirs)
1196	@$(kecho) '  Building modules, stage 2.';
1197	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
1198
1199PHONY += modules_install
1200modules_install: _emodinst_ _emodinst_post
1201
1202install-dir := $(if $(INSTALL_MOD_DIR),$(INSTALL_MOD_DIR),extra)
1203PHONY += _emodinst_
1204_emodinst_:
1205	$(Q)mkdir -p $(MODLIB)/$(install-dir)
1206	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modinst
1207
1208PHONY += _emodinst_post
1209_emodinst_post: _emodinst_
1210	$(call cmd,depmod)
1211
1212clean-dirs := $(addprefix _clean_,$(KBUILD_EXTMOD))
1213
1214PHONY += $(clean-dirs) clean
1215$(clean-dirs):
1216	$(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
1217
1218clean:	rm-dirs := $(MODVERDIR)
1219clean: rm-files := $(KBUILD_EXTMOD)/Module.symvers
1220
 
1221help:
1222	@echo  '  Building external modules.'
1223	@echo  '  Syntax: make -C path/to/kernel/src M=$$PWD target'
1224	@echo  ''
1225	@echo  '  modules         - default target, build the module(s)'
1226	@echo  '  modules_install - install the module'
1227	@echo  '  clean           - remove generated files in module directory only'
 
1228	@echo  ''
1229
1230# Dummies...
1231PHONY += prepare scripts
1232prepare: ;
1233scripts: ;
 
 
 
 
 
 
1234endif # KBUILD_EXTMOD
1235
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1236clean: $(clean-dirs)
1237	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/link-vmlinux.sh clean
1238	$(call cmd,rmdirs)
1239	$(call cmd,rmfiles)
1240	@find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \
1241		\( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
 
 
 
 
 
 
1242		-o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
 
 
1243		-o -name '*.symtypes' -o -name 'modules.order' \
1244		-o -name modules.builtin -o -name '.tmp_*.o.*' \
1245		-o -name '*.gcno' \) -type f -print | xargs rm -f
 
 
 
 
1246
1247# Generate tags for editors
1248# ---------------------------------------------------------------------------
1249quiet_cmd_tags = GEN     $@
1250      cmd_tags = $(CONFIG_SHELL) $(srctree)/scripts/tags.sh $@
1251
1252tags TAGS cscope gtags: FORCE
1253	$(call cmd,tags)
1254
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1255# Scripts to check various things for consistency
1256# ---------------------------------------------------------------------------
1257
1258PHONY += includecheck versioncheck coccicheck namespacecheck export_report
1259
1260includecheck:
1261	find $(srctree)/* $(RCS_FIND_IGNORE) \
1262		-name '*.[hcS]' -type f -print | sort \
1263		| xargs $(PERL) -w $(srctree)/scripts/checkincludes.pl
1264
1265versioncheck:
1266	find $(srctree)/* $(RCS_FIND_IGNORE) \
1267		-name '*.[hcS]' -type f -print | sort \
1268		| xargs $(PERL) -w $(srctree)/scripts/checkversion.pl
1269
1270coccicheck:
1271	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/$@
1272
1273namespacecheck:
1274	$(PERL) $(srctree)/scripts/namespace.pl
1275
1276export_report:
1277	$(PERL) $(srctree)/scripts/export_report.pl
1278
1279endif #ifeq ($(config-targets),1)
1280endif #ifeq ($(mixed-targets),1)
1281
1282PHONY += checkstack kernelrelease kernelversion
1283
1284# UML needs a little special treatment here.  It wants to use the host
1285# toolchain, so needs $(SUBARCH) passed to checkstack.pl.  Everyone
1286# else wants $(ARCH), including people doing cross-builds, which means
1287# that $(SUBARCH) doesn't work here.
1288ifeq ($(ARCH), um)
1289CHECKSTACK_ARCH := $(SUBARCH)
1290else
1291CHECKSTACK_ARCH := $(ARCH)
1292endif
 
1293checkstack:
1294	$(OBJDUMP) -d vmlinux $$(find . -name '*.ko') | \
1295	$(PERL) $(src)/scripts/checkstack.pl $(CHECKSTACK_ARCH)
1296
1297kernelrelease:
1298	@echo "$(KERNELVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
1299
1300kernelversion:
1301	@echo $(KERNELVERSION)
1302
1303# Clear a bunch of variables before executing the submake
1304tools/: FORCE
1305	$(Q)$(MAKE) LDFLAGS= MAKEFLAGS= -C $(src)/tools/
1306
1307tools/%: FORCE
1308	$(Q)$(MAKE) LDFLAGS= MAKEFLAGS= -C $(src)/tools/ $*
1309
1310# Single targets
1311# ---------------------------------------------------------------------------
1312# Single targets are compatible with:
1313# - build with mixed source and output
1314# - build with separate output dir 'make O=...'
1315# - external modules
1316#
1317#  target-dir => where to store outputfile
1318#  build-dir  => directory in kernel source tree to use
1319
1320ifeq ($(KBUILD_EXTMOD),)
1321        build-dir  = $(patsubst %/,%,$(dir $@))
1322        target-dir = $(dir $@)
1323else
1324        zap-slash=$(filter-out .,$(patsubst %/,%,$(dir $@)))
1325        build-dir  = $(KBUILD_EXTMOD)$(if $(zap-slash),/$(zap-slash))
1326        target-dir = $(if $(KBUILD_EXTMOD),$(dir $<),$(dir $@))
1327endif
1328
1329%.s: %.c prepare scripts FORCE
1330	$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1331%.i: %.c prepare scripts FORCE
1332	$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1333%.o: %.c prepare scripts FORCE
1334	$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1335%.lst: %.c prepare scripts FORCE
1336	$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1337%.s: %.S prepare scripts FORCE
1338	$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1339%.o: %.S prepare scripts FORCE
1340	$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1341%.symtypes: %.c prepare scripts FORCE
1342	$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1343
1344# Modules
1345/: prepare scripts FORCE
1346	$(cmd_crmodverdir)
1347	$(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
1348	$(build)=$(build-dir)
1349%/: prepare scripts FORCE
1350	$(cmd_crmodverdir)
1351	$(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
1352	$(build)=$(build-dir)
1353%.ko: prepare scripts FORCE
1354	$(cmd_crmodverdir)
1355	$(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1)   \
1356	$(build)=$(build-dir) $(@:.ko=.o)
1357	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
1358
1359# FIXME Should go into a make.lib or something 
1360# ===========================================================================
1361
1362quiet_cmd_rmdirs = $(if $(wildcard $(rm-dirs)),CLEAN   $(wildcard $(rm-dirs)))
1363      cmd_rmdirs = rm -rf $(rm-dirs)
 
1364
1365quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN   $(wildcard $(rm-files)))
1366      cmd_rmfiles = rm -f $(rm-files)
1367
1368# Run depmod only if we have System.map and depmod is executable
1369quiet_cmd_depmod = DEPMOD  $(KERNELRELEASE)
1370      cmd_depmod = $(CONFIG_SHELL) $(srctree)/scripts/depmod.sh $(DEPMOD) \
1371                   $(KERNELRELEASE)
1372
1373# Create temporary dir for module support files
1374# clean it up only when building all modules
1375cmd_crmodverdir = $(Q)mkdir -p $(MODVERDIR) \
1376                  $(if $(KBUILD_MODULES),; rm -f $(MODVERDIR)/*)
1377
1378# read all saved command lines
1379
1380targets := $(wildcard $(sort $(targets)))
1381cmd_files := $(wildcard .*.cmd $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd))
1382
1383ifneq ($(cmd_files),)
1384  $(cmd_files): ;	# Do not try to update included dependency files
1385  include $(cmd_files)
1386endif
1387
1388# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.clean obj=dir
1389# Usage:
1390# $(Q)$(MAKE) $(clean)=dir
1391clean := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.clean obj
1392
1393endif	# skip-makefile
 
 
1394
1395PHONY += FORCE
1396FORCE:
1397
1398# Declare the contents of the .PHONY variable as phony.  We keep that
1399# information in a variable so we can use it in if_changed and friends.
1400.PHONY: $(PHONY)