1# SPDX-License-Identifier: GPL-2.0
  2#
  3# USB Storage driver configuration
  4#
  5
  6comment "NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may"
  7comment "also be needed; see USB_STORAGE Help for more info"
  8
  9config USB_STORAGE
 10	tristate "USB Mass Storage support"
 11	depends on SCSI
 12	help
 13	  Say Y here if you want to connect USB mass storage devices to your
 14	  computer's USB port. This is the driver you need for USB
 15	  floppy drives, USB hard disks, USB tape drives, USB CD-ROMs,
 16	  USB flash devices, and memory sticks, along with
 17	  similar devices. This driver may also be used for some cameras
 18	  and card readers.
 19
 20	  This option depends on 'SCSI' support being enabled, but you
 21	  probably also need 'SCSI device support: SCSI disk support'
 22	  (BLK_DEV_SD) for most USB storage devices.
 
 
 23
 24	  To compile this driver as a module, choose M here: the
 25	  module will be called usb-storage.
 26
 27if USB_STORAGE
 28
 29config USB_STORAGE_DEBUG
 30	bool "USB Mass Storage verbose debug"
 
 31	help
 32	  Say Y here in order to have the USB Mass Storage code generate
 33	  verbose debugging messages.
 34
 35config USB_STORAGE_REALTEK
 36	tristate "Realtek Card Reader support"
 
 37	help
 38	  Say Y here to include additional code to support the power-saving function
 39	  for Realtek RTS51xx USB card readers.
 40
 41	  If this driver is compiled as a module, it will be named ums-realtek.
 42
 43config REALTEK_AUTOPM
 44	bool "Realtek Card Reader autosuspend support"
 45	depends on USB_STORAGE_REALTEK && PM
 46	default y
 47
 48config USB_STORAGE_DATAFAB
 49	tristate "Datafab Compact Flash Reader support"
 
 50	help
 51	  Support for certain Datafab CompactFlash readers.
 52	  Datafab has a web page at <http://www.datafab.com/>.
 53
 54	  If this driver is compiled as a module, it will be named ums-datafab.
 55
 56config USB_STORAGE_FREECOM
 57	tristate "Freecom USB/ATAPI Bridge support"
 
 58	help
 59	  Support for the Freecom USB to IDE/ATAPI adaptor.
 60	  Freecom has a web page at <https://www.freecom.de/>.
 61
 62	  If this driver is compiled as a module, it will be named ums-freecom.
 63
 64config USB_STORAGE_ISD200
 65	tristate "ISD-200 USB/ATA Bridge support"
 66	help
 
 67	  Say Y here if you want to use USB Mass Store devices based
 68	  on the In-Systems Design ISD-200 USB/ATA bridge.
 69
 70	  Some of the products that use this chip are:
 71
 72	  - Archos Jukebox 6000
 73	  - ISD SmartCable for Storage
 74	  - Taiwan Skymaster CD530U/DEL-0241 IDE bridge
 75	  - Sony CRX10U CD-R/RW drive
 76	  - CyQ've CQ8060A CDRW drive
 77	  - Planex eXtreme Drive RX-25HU USB-IDE cable (not model RX-25U)
 78
 79	  If this driver is compiled as a module, it will be named ums-isd200.
 80
 81config USB_STORAGE_USBAT
 82	tristate "USBAT/USBAT02-based storage support"
 
 83	help
 84	  Say Y here to include additional code to support storage devices
 85	  based on the SCM/Shuttle USBAT/USBAT02 processors.
 86
 87	  Devices reported to work with this driver include:
 88	  - CompactFlash reader included with Kodak DC3800 camera
 89	  - Dane-Elec Zmate CompactFlash reader
 90	  - Delkin Efilm reader2
 91	  - HP 8200e/8210e/8230e CD-Writer Plus drives
 92	  - I-JAM JS-50U
 93	  - Jessops CompactFlash JESDCFRU BLACK
 94	  - Kingston Technology PCREAD-USB/CF
 95	  - Maxell UA4 CompactFlash reader
 96	  - Memorex UCF-100
 97	  - Microtech ZiO! ICS-45 CF2
 98	  - RCA LYRA MP3 portable
 99	  - Sandisk ImageMate SDDR-05b
100
101	  If this driver is compiled as a module, it will be named ums-usbat.
102
103config USB_STORAGE_SDDR09
104	tristate "SanDisk SDDR-09 (and other SmartMedia, including DPCM) support"
 
105	help
106	  Say Y here to include additional code to support the Sandisk SDDR-09
107	  SmartMedia reader in the USB Mass Storage driver.
108	  Also works for the Microtech Zio! CompactFlash/SmartMedia reader.
109
110	  If this driver is compiled as a module, it will be named ums-sddr09.
111
112config USB_STORAGE_SDDR55
113	tristate "SanDisk SDDR-55 SmartMedia support"
 
114	help
115	  Say Y here to include additional code to support the Sandisk SDDR-55
116	  SmartMedia reader in the USB Mass Storage driver.
117
118	  If this driver is compiled as a module, it will be named ums-sddr55.
119
120config USB_STORAGE_JUMPSHOT
121	tristate "Lexar Jumpshot Compact Flash Reader"
 
122	help
123	  Say Y here to include additional code to support the Lexar Jumpshot
124	  USB CompactFlash reader.
125
126	  If this driver is compiled as a module, it will be named ums-jumpshot.
127
128config USB_STORAGE_ALAUDA
129	tristate "Olympus MAUSB-10/Fuji DPC-R1 support"
 
130	help
131	  Say Y here to include additional code to support the Olympus MAUSB-10
132	  and Fujifilm DPC-R1 USB Card reader/writer devices.
133
134	  These devices are based on the Alauda chip and support both
135	  XD and SmartMedia cards.
136
137	  If this driver is compiled as a module, it will be named ums-alauda.
138
139config USB_STORAGE_ONETOUCH
140	tristate "Support OneTouch Button on Maxtor Hard Drives"
 
141	depends on INPUT=y || INPUT=USB_STORAGE
142	help
143	  Say Y here to include additional code to support the Maxtor OneTouch
144	  USB hard drive's onetouch button.
145
146	  This code registers the button on the front of Maxtor OneTouch USB
147	  hard drive's as an input device. An action can be associated with
148	  this input in any keybinding software. (e.g. gnome's keyboard short-
149	  cuts)
150
151	  If this driver is compiled as a module, it will be named ums-onetouch.
152
153config USB_STORAGE_KARMA
154	tristate "Support for Rio Karma music player"
 
155	help
156	  Say Y here to include additional code to support the Rio Karma
157	  USB interface.
158
159	  This code places the Rio Karma into mass storage mode, enabling
160	  it to be mounted as an ordinary filesystem. Performing an eject
161	  on the resulting scsi device node returns the Karma to normal
162	  operation.
163
164	  If this driver is compiled as a module, it will be named ums-karma.
165
166config USB_STORAGE_CYPRESS_ATACB
167	tristate "SAT emulation on Cypress USB/ATA Bridge with ATACB"
168	help
 
169	  Say Y here if you want to use SAT (ata pass through) on devices based
170	  on the Cypress USB/ATA bridge supporting ATACB. This will allow you
171	  to use tools to tune and monitor your drive (like hdparm or smartctl).
172
173	  If you say no here your device will still work with the standard usb
174	  mass storage class.
175
176	  If this driver is compiled as a module, it will be named ums-cypress.
177
178config USB_STORAGE_ENE_UB6250
179	tristate "USB ENE card reader support"
180	help
 
 
181	  Say Y here if you wish to control a ENE SD/MS Card reader.
182	  Note that this driver does not support SM cards.
 
 
 
 
183
184	  To compile this driver as a module, choose M here: the
185	  module will be called ums-eneub6250.
186
187endif # USB_STORAGE
188
189config USB_UAS
190	tristate "USB Attached SCSI"
191	depends on SCSI && USB_STORAGE
192	help
193	  The USB Attached SCSI protocol is supported by some USB
194	  storage devices.  It permits higher performance by supporting
195	  multiple outstanding commands.
196
197	  If you don't know whether you have a UAS device, it is safe to
198	  say 'Y' or 'M' here and the kernel will use the right driver.
199
200	  If you compile this driver as a module, it will be named uas.

 
  1#
  2# USB Storage driver configuration
  3#
  4
  5comment "NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may"
  6comment "also be needed; see USB_STORAGE Help for more info"
  7
  8config USB_STORAGE
  9	tristate "USB Mass Storage support"
 10	depends on SCSI
 11	---help---
 12	  Say Y here if you want to connect USB mass storage devices to your
 13	  computer's USB port. This is the driver you need for USB
 14	  floppy drives, USB hard disks, USB tape drives, USB CD-ROMs,
 15	  USB flash devices, and memory sticks, along with
 16	  similar devices. This driver may also be used for some cameras
 17	  and card readers.
 18
 19	  This option depends on 'SCSI' support being enabled, but you
 20	  probably also need 'SCSI device support: SCSI disk support'
 21	  (BLK_DEV_SD) for most USB storage devices.  Some devices also
 22	  will require 'Probe all LUNs on each SCSI device'
 23	  (SCSI_MULTI_LUN).
 24
 25	  To compile this driver as a module, choose M here: the
 26	  module will be called usb-storage.
 27
 
 
 28config USB_STORAGE_DEBUG
 29	bool "USB Mass Storage verbose debug"
 30	depends on USB_STORAGE
 31	help
 32	  Say Y here in order to have the USB Mass Storage code generate
 33	  verbose debugging messages.
 34
 35config USB_STORAGE_REALTEK
 36	tristate "Realtek Card Reader support"
 37	depends on USB_STORAGE
 38	help
 39	  Say Y here to include additional code to support the power-saving function
 40	  for Realtek RTS51xx USB card readers.
 41
 42	  If this driver is compiled as a module, it will be named ums-realtek.
 43
 44config REALTEK_AUTOPM
 45	bool "Realtek Card Reader autosuspend support"
 46	depends on USB_STORAGE_REALTEK && PM_RUNTIME
 47	default y
 48
 49config USB_STORAGE_DATAFAB
 50	tristate "Datafab Compact Flash Reader support"
 51	depends on USB_STORAGE
 52	help
 53	  Support for certain Datafab CompactFlash readers.
 54	  Datafab has a web page at <http://www.datafab.com/>.
 55
 56	  If this driver is compiled as a module, it will be named ums-datafab.
 57
 58config USB_STORAGE_FREECOM
 59	tristate "Freecom USB/ATAPI Bridge support"
 60	depends on USB_STORAGE
 61	help
 62	  Support for the Freecom USB to IDE/ATAPI adaptor.
 63	  Freecom has a web page at <http://www.freecom.de/>.
 64
 65	  If this driver is compiled as a module, it will be named ums-freecom.
 66
 67config USB_STORAGE_ISD200
 68	tristate "ISD-200 USB/ATA Bridge support"
 69	depends on USB_STORAGE
 70	---help---
 71	  Say Y here if you want to use USB Mass Store devices based
 72	  on the In-Systems Design ISD-200 USB/ATA bridge.
 73
 74	  Some of the products that use this chip are:
 75
 76	  - Archos Jukebox 6000
 77	  - ISD SmartCable for Storage
 78	  - Taiwan Skymaster CD530U/DEL-0241 IDE bridge
 79	  - Sony CRX10U CD-R/RW drive
 80	  - CyQ've CQ8060A CDRW drive
 81	  - Planex eXtreme Drive RX-25HU USB-IDE cable (not model RX-25U)
 82
 83	  If this driver is compiled as a module, it will be named ums-isd200.
 84
 85config USB_STORAGE_USBAT
 86	tristate "USBAT/USBAT02-based storage support"
 87	depends on USB_STORAGE
 88	help
 89	  Say Y here to include additional code to support storage devices
 90	  based on the SCM/Shuttle USBAT/USBAT02 processors.
 91
 92	  Devices reported to work with this driver include:
 93	  - CompactFlash reader included with Kodak DC3800 camera
 94	  - Dane-Elec Zmate CompactFlash reader
 95	  - Delkin Efilm reader2
 96	  - HP 8200e/8210e/8230e CD-Writer Plus drives
 97	  - I-JAM JS-50U
 98	  - Jessops CompactFlash JESDCFRU BLACK
 99	  - Kingston Technology PCREAD-USB/CF
100	  - Maxell UA4 CompactFlash reader
101	  - Memorex UCF-100
102	  - Microtech ZiO! ICS-45 CF2
103	  - RCA LYRA MP3 portable
104	  - Sandisk ImageMate SDDR-05b
105
106	  If this driver is compiled as a module, it will be named ums-usbat.
107
108config USB_STORAGE_SDDR09
109	tristate "SanDisk SDDR-09 (and other SmartMedia, including DPCM) support"
110	depends on USB_STORAGE
111	help
112	  Say Y here to include additional code to support the Sandisk SDDR-09
113	  SmartMedia reader in the USB Mass Storage driver.
114	  Also works for the Microtech Zio! CompactFlash/SmartMedia reader.
115
116	  If this driver is compiled as a module, it will be named ums-sddr09.
117
118config USB_STORAGE_SDDR55
119	tristate "SanDisk SDDR-55 SmartMedia support"
120	depends on USB_STORAGE
121	help
122	  Say Y here to include additional code to support the Sandisk SDDR-55
123	  SmartMedia reader in the USB Mass Storage driver.
124
125	  If this driver is compiled as a module, it will be named ums-sddr55.
126
127config USB_STORAGE_JUMPSHOT
128	tristate "Lexar Jumpshot Compact Flash Reader"
129	depends on USB_STORAGE
130	help
131	  Say Y here to include additional code to support the Lexar Jumpshot
132	  USB CompactFlash reader.
133
134	  If this driver is compiled as a module, it will be named ums-jumpshot.
135
136config USB_STORAGE_ALAUDA
137	tristate "Olympus MAUSB-10/Fuji DPC-R1 support"
138	depends on USB_STORAGE
139	help
140	  Say Y here to include additional code to support the Olympus MAUSB-10
141	  and Fujifilm DPC-R1 USB Card reader/writer devices.
142
143	  These devices are based on the Alauda chip and support both
144	  XD and SmartMedia cards.
145
146	  If this driver is compiled as a module, it will be named ums-alauda.
147
148config USB_STORAGE_ONETOUCH
149	tristate "Support OneTouch Button on Maxtor Hard Drives"
150	depends on USB_STORAGE
151	depends on INPUT=y || INPUT=USB_STORAGE
152	help
153	  Say Y here to include additional code to support the Maxtor OneTouch
154	  USB hard drive's onetouch button.
155
156	  This code registers the button on the front of Maxtor OneTouch USB
157	  hard drive's as an input device. An action can be associated with
158	  this input in any keybinding software. (e.g. gnome's keyboard short-
159	  cuts)
160
161	  If this driver is compiled as a module, it will be named ums-onetouch.
162
163config USB_STORAGE_KARMA
164	tristate "Support for Rio Karma music player"
165	depends on USB_STORAGE
166	help
167	  Say Y here to include additional code to support the Rio Karma
168	  USB interface.
169
170	  This code places the Rio Karma into mass storage mode, enabling
171	  it to be mounted as an ordinary filesystem. Performing an eject
172	  on the resulting scsi device node returns the Karma to normal
173	  operation.
174
175	  If this driver is compiled as a module, it will be named ums-karma.
176
177config USB_STORAGE_CYPRESS_ATACB
178	tristate "SAT emulation on Cypress USB/ATA Bridge with ATACB"
179	depends on USB_STORAGE
180	---help---
181	  Say Y here if you want to use SAT (ata pass through) on devices based
182	  on the Cypress USB/ATA bridge supporting ATACB. This will allow you
183	  to use tools to tune and monitor your drive (like hdparm or smartctl).
184
185	  If you say no here your device will still work with the standard usb
186	  mass storage class.
187
188	  If this driver is compiled as a module, it will be named ums-cypress.
189
190config USB_STORAGE_ENE_UB6250
191	tristate "USB ENE card reader support"
192	depends on SCSI
193	depends on USB_STORAGE
194	---help---
195	  Say Y here if you wish to control a ENE SD/MS Card reader.
196	  To use SM card, please build driver/staging/keucr/keucr.ko
197
198	  This option depends on 'SCSI' support being enabled, but you
199	  probably also need 'SCSI device support: SCSI disk support'
200	  (BLK_DEV_SD) for most USB storage devices.
201
202	  To compile this driver as a module, choose M here: the
203	  module will be called ums-eneub6250.
 
 
204
205config USB_UAS
206	tristate "USB Attached SCSI"
207	depends on SCSI && USB_STORAGE
208	help
209	  The USB Attached SCSI protocol is supported by some USB
210	  storage devices.  It permits higher performance by supporting
211	  multiple outstanding commands.
212
213	  If you don't know whether you have a UAS device, it is safe to
214	  say 'Y' or 'M' here and the kernel will use the right driver.
215
216	  If you compile this driver as a module, it will be named uas.