Linux Audio

Check our new training course

Loading...
v6.8
  1// SPDX-License-Identifier: GPL-2.0
  2/*
  3 * drivers/usb/host/ehci-orion.c
  4 *
  5 * Tzachi Perelstein <tzachi@marvell.com>
 
 
 
 
  6 */
  7
  8#include <linux/kernel.h>
  9#include <linux/module.h>
 10#include <linux/platform_device.h>
 11#include <linux/mbus.h>
 12#include <linux/clk.h>
 13#include <linux/platform_data/usb-ehci-orion.h>
 14#include <linux/of.h>
 15#include <linux/phy/phy.h>
 
 16#include <linux/usb.h>
 17#include <linux/usb/hcd.h>
 18#include <linux/io.h>
 19#include <linux/dma-mapping.h>
 20
 21#include "ehci.h"
 22
 23#define rdl(off)	readl_relaxed(hcd->regs + (off))
 24#define wrl(off, val)	writel_relaxed((val), hcd->regs + (off))
 25
 26#define USB_CMD			0x140
 27#define   USB_CMD_RUN		BIT(0)
 28#define   USB_CMD_RESET		BIT(1)
 29#define USB_MODE		0x1a8
 30#define   USB_MODE_MASK		GENMASK(1, 0)
 31#define   USB_MODE_DEVICE	0x2
 32#define   USB_MODE_HOST		0x3
 33#define   USB_MODE_SDIS		BIT(4)
 34#define USB_CAUSE		0x310
 35#define USB_MASK		0x314
 36#define USB_WINDOW_CTRL(i)	(0x320 + ((i) << 4))
 37#define USB_WINDOW_BASE(i)	(0x324 + ((i) << 4))
 38#define USB_IPG			0x360
 39#define USB_PHY_PWR_CTRL	0x400
 40#define USB_PHY_TX_CTRL		0x420
 41#define USB_PHY_RX_CTRL		0x430
 42#define USB_PHY_IVREF_CTRL	0x440
 43#define USB_PHY_TST_GRP_CTRL	0x450
 44
 45#define USB_SBUSCFG		0x90
 46
 47/* BAWR = BARD = 3 : Align read/write bursts packets larger than 128 bytes */
 48#define USB_SBUSCFG_BAWR_ALIGN_128B	(0x3 << 6)
 49#define USB_SBUSCFG_BARD_ALIGN_128B	(0x3 << 3)
 50/* AHBBRST = 3	   : Align AHB Burst to INCR16 (64 bytes) */
 51#define USB_SBUSCFG_AHBBRST_INCR16	(0x3 << 0)
 52
 53#define USB_SBUSCFG_DEF_VAL (USB_SBUSCFG_BAWR_ALIGN_128B	\
 54			     | USB_SBUSCFG_BARD_ALIGN_128B	\
 55			     | USB_SBUSCFG_AHBBRST_INCR16)
 56
 57#define DRIVER_DESC "EHCI orion driver"
 58
 59#define hcd_to_orion_priv(h) ((struct orion_ehci_hcd *)hcd_to_ehci(h)->priv)
 60
 61struct orion_ehci_hcd {
 62	struct clk *clk;
 63	struct phy *phy;
 64};
 65
 66static struct hc_driver __read_mostly ehci_orion_hc_driver;
 67
 68/*
 69 * Implement Orion USB controller specification guidelines
 70 */
 71static void orion_usb_phy_v1_setup(struct usb_hcd *hcd)
 72{
 73	/* The below GLs are according to the Orion Errata document */
 74	/*
 75	 * Clear interrupt cause and mask
 76	 */
 77	wrl(USB_CAUSE, 0);
 78	wrl(USB_MASK, 0);
 79
 80	/*
 81	 * Reset controller
 82	 */
 83	wrl(USB_CMD, rdl(USB_CMD) | USB_CMD_RESET);
 84	while (rdl(USB_CMD) & USB_CMD_RESET);
 85
 86	/*
 87	 * GL# USB-10: Set IPG for non start of frame packets
 88	 * Bits[14:8]=0xc
 89	 */
 90	wrl(USB_IPG, (rdl(USB_IPG) & ~0x7f00) | 0xc00);
 91
 92	/*
 93	 * GL# USB-9: USB 2.0 Power Control
 94	 * BG_VSEL[7:6]=0x1
 95	 */
 96	wrl(USB_PHY_PWR_CTRL, (rdl(USB_PHY_PWR_CTRL) & ~0xc0)| 0x40);
 97
 98	/*
 99	 * GL# USB-1: USB PHY Tx Control - force calibration to '8'
100	 * TXDATA_BLOCK_EN[21]=0x1, EXT_RCAL_EN[13]=0x1, IMP_CAL[6:3]=0x8
101	 */
102	wrl(USB_PHY_TX_CTRL, (rdl(USB_PHY_TX_CTRL) & ~0x78) | 0x202040);
103
104	/*
105	 * GL# USB-3 GL# USB-9: USB PHY Rx Control
106	 * RXDATA_BLOCK_LENGHT[31:30]=0x3, EDGE_DET_SEL[27:26]=0,
107	 * CDR_FASTLOCK_EN[21]=0, DISCON_THRESHOLD[9:8]=0, SQ_THRESH[7:4]=0x1
108	 */
109	wrl(USB_PHY_RX_CTRL, (rdl(USB_PHY_RX_CTRL) & ~0xc2003f0) | 0xc0000010);
110
111	/*
112	 * GL# USB-3 GL# USB-9: USB PHY IVREF Control
113	 * PLLVDD12[1:0]=0x2, RXVDD[5:4]=0x3, Reserved[19]=0
114	 */
115	wrl(USB_PHY_IVREF_CTRL, (rdl(USB_PHY_IVREF_CTRL) & ~0x80003 ) | 0x32);
116
117	/*
118	 * GL# USB-3 GL# USB-9: USB PHY Test Group Control
119	 * REG_FIFO_SQ_RST[15]=0
120	 */
121	wrl(USB_PHY_TST_GRP_CTRL, rdl(USB_PHY_TST_GRP_CTRL) & ~0x8000);
122
123	/*
124	 * Stop and reset controller
125	 */
126	wrl(USB_CMD, rdl(USB_CMD) & ~USB_CMD_RUN);
127	wrl(USB_CMD, rdl(USB_CMD) | USB_CMD_RESET);
128	while (rdl(USB_CMD) & USB_CMD_RESET);
129
130	/*
131	 * GL# USB-5 Streaming disable REG_USB_MODE[4]=1
132	 * TBD: This need to be done after each reset!
133	 * GL# USB-4 Setup USB Host mode
134	 */
135	wrl(USB_MODE, USB_MODE_SDIS | USB_MODE_HOST);
136}
137
138static void
139ehci_orion_conf_mbus_windows(struct usb_hcd *hcd,
140			     const struct mbus_dram_target_info *dram)
141{
142	int i;
143
144	for (i = 0; i < 4; i++) {
145		wrl(USB_WINDOW_CTRL(i), 0);
146		wrl(USB_WINDOW_BASE(i), 0);
147	}
148
149	for (i = 0; i < dram->num_cs; i++) {
150		const struct mbus_dram_window *cs = dram->cs + i;
151
152		wrl(USB_WINDOW_CTRL(i), ((cs->size - 1) & 0xffff0000) |
153					(cs->mbus_attr << 8) |
154					(dram->mbus_dram_target_id << 4) | 1);
155		wrl(USB_WINDOW_BASE(i), cs->base);
156	}
157}
158
159static int ehci_orion_drv_reset(struct usb_hcd *hcd)
160{
161	struct device *dev = hcd->self.controller;
162	int ret;
163
164	ret = ehci_setup(hcd);
165	if (ret)
166		return ret;
167
168	/*
169	 * For SoC without hlock, need to program sbuscfg value to guarantee
170	 * AHB master's burst would not overrun or underrun FIFO.
171	 *
172	 * sbuscfg reg has to be set after usb controller reset, otherwise
173	 * the value would be override to 0.
174	 */
175	if (of_device_is_compatible(dev->of_node, "marvell,armada-3700-ehci"))
176		wrl(USB_SBUSCFG, USB_SBUSCFG_DEF_VAL);
177
178	return ret;
179}
180
181static int __maybe_unused ehci_orion_drv_suspend(struct device *dev)
182{
183	struct usb_hcd *hcd = dev_get_drvdata(dev);
184
185	return ehci_suspend(hcd, device_may_wakeup(dev));
186}
187
188static int __maybe_unused ehci_orion_drv_resume(struct device *dev)
189{
190	struct usb_hcd *hcd = dev_get_drvdata(dev);
191
192	return ehci_resume(hcd, false);
193}
194
195static SIMPLE_DEV_PM_OPS(ehci_orion_pm_ops, ehci_orion_drv_suspend,
196			 ehci_orion_drv_resume);
197
198static const struct ehci_driver_overrides orion_overrides __initconst = {
199	.extra_priv_size =	sizeof(struct orion_ehci_hcd),
200	.reset = ehci_orion_drv_reset,
201};
202
203static int ehci_orion_drv_probe(struct platform_device *pdev)
204{
205	struct orion_ehci_data *pd = dev_get_platdata(&pdev->dev);
206	const struct mbus_dram_target_info *dram;
207	struct resource *res;
208	struct usb_hcd *hcd;
209	struct ehci_hcd *ehci;
 
210	void __iomem *regs;
211	int irq, err;
212	enum orion_ehci_phy_ver phy_version;
213	struct orion_ehci_hcd *priv;
214
215	if (usb_disabled())
216		return -ENODEV;
217
218	pr_debug("Initializing Orion-SoC USB Host Controller\n");
219
220	irq = platform_get_irq(pdev, 0);
221	if (irq < 0) {
222		err = irq;
223		goto err;
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
224	}
225
226	/*
227	 * Right now device-tree probed devices don't get dma_mask
228	 * set. Since shared usb code relies on it, set it here for
229	 * now. Once we have dma capability bindings this can go away.
230	 */
231	err = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
232	if (err)
233		goto err;
234
235	regs = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
236	if (IS_ERR(regs)) {
237		err = PTR_ERR(regs);
238		goto err;
239	}
240
 
 
 
 
 
 
241	hcd = usb_create_hcd(&ehci_orion_hc_driver,
242			&pdev->dev, dev_name(&pdev->dev));
243	if (!hcd) {
244		err = -ENOMEM;
245		goto err;
246	}
247
248	hcd->rsrc_start = res->start;
249	hcd->rsrc_len = resource_size(res);
250	hcd->regs = regs;
251
252	ehci = hcd_to_ehci(hcd);
253	ehci->caps = hcd->regs + 0x100;
254	hcd->has_tt = 1;
255
256	priv = hcd_to_orion_priv(hcd);
257	/*
258	 * Not all platforms can gate the clock, so it is not an error if
259	 * the clock does not exists.
260	 */
261	priv->clk = devm_clk_get(&pdev->dev, NULL);
262	if (!IS_ERR(priv->clk)) {
263		err = clk_prepare_enable(priv->clk);
264		if (err)
265			goto err_put_hcd;
266	}
267
268	priv->phy = devm_phy_optional_get(&pdev->dev, "usb");
269	if (IS_ERR(priv->phy)) {
270		err = PTR_ERR(priv->phy);
271		if (err != -ENOSYS)
272			goto err_dis_clk;
273	}
274
275	/*
276	 * (Re-)program MBUS remapping windows if we are asked to.
277	 */
278	dram = mv_mbus_dram_info();
279	if (dram)
280		ehci_orion_conf_mbus_windows(hcd, dram);
281
282	/*
283	 * setup Orion USB controller.
284	 */
285	if (pdev->dev.of_node)
286		phy_version = EHCI_PHY_NA;
287	else
288		phy_version = pd->phy_version;
289
290	switch (phy_version) {
291	case EHCI_PHY_NA:	/* dont change USB phy settings */
292		break;
293	case EHCI_PHY_ORION:
294		orion_usb_phy_v1_setup(hcd);
295		break;
296	case EHCI_PHY_DD:
297	case EHCI_PHY_KW:
298	default:
299		dev_warn(&pdev->dev, "USB phy version isn't supported.\n");
300	}
301
302	err = usb_add_hcd(hcd, irq, IRQF_SHARED);
303	if (err)
304		goto err_dis_clk;
305
306	device_wakeup_enable(hcd->self.controller);
307	return 0;
308
309err_dis_clk:
310	if (!IS_ERR(priv->clk))
311		clk_disable_unprepare(priv->clk);
312err_put_hcd:
313	usb_put_hcd(hcd);
314err:
 
 
 
315	dev_err(&pdev->dev, "init %s fail, %d\n",
316		dev_name(&pdev->dev), err);
317
318	return err;
319}
320
321static void ehci_orion_drv_remove(struct platform_device *pdev)
322{
323	struct usb_hcd *hcd = platform_get_drvdata(pdev);
324	struct orion_ehci_hcd *priv = hcd_to_orion_priv(hcd);
325
326	usb_remove_hcd(hcd);
327
328	if (!IS_ERR(priv->clk))
329		clk_disable_unprepare(priv->clk);
330
331	usb_put_hcd(hcd);
 
 
 
 
 
332}
333
334static const struct of_device_id ehci_orion_dt_ids[] = {
335	{ .compatible = "marvell,orion-ehci", },
336	{ .compatible = "marvell,armada-3700-ehci", },
337	{},
338};
339MODULE_DEVICE_TABLE(of, ehci_orion_dt_ids);
340
341static struct platform_driver ehci_orion_driver = {
342	.probe		= ehci_orion_drv_probe,
343	.remove_new	= ehci_orion_drv_remove,
344	.shutdown	= usb_hcd_platform_shutdown,
345	.driver = {
346		.name	= "orion-ehci",
 
347		.of_match_table = ehci_orion_dt_ids,
348		.pm = &ehci_orion_pm_ops,
349	},
350};
351
352static int __init ehci_orion_init(void)
353{
354	if (usb_disabled())
355		return -ENODEV;
356
357	ehci_init_driver(&ehci_orion_hc_driver, &orion_overrides);
 
 
358	return platform_driver_register(&ehci_orion_driver);
359}
360module_init(ehci_orion_init);
361
362static void __exit ehci_orion_cleanup(void)
363{
364	platform_driver_unregister(&ehci_orion_driver);
365}
366module_exit(ehci_orion_cleanup);
367
368MODULE_DESCRIPTION(DRIVER_DESC);
369MODULE_ALIAS("platform:orion-ehci");
370MODULE_AUTHOR("Tzachi Perelstein");
371MODULE_LICENSE("GPL v2");
v3.15
 
  1/*
  2 * drivers/usb/host/ehci-orion.c
  3 *
  4 * Tzachi Perelstein <tzachi@marvell.com>
  5 *
  6 * This file is licensed under  the terms of the GNU General Public
  7 * License version 2. This program is licensed "as is" without any
  8 * warranty of any kind, whether express or implied.
  9 */
 10
 11#include <linux/kernel.h>
 12#include <linux/module.h>
 13#include <linux/platform_device.h>
 14#include <linux/mbus.h>
 15#include <linux/clk.h>
 16#include <linux/platform_data/usb-ehci-orion.h>
 17#include <linux/of.h>
 18#include <linux/of_device.h>
 19#include <linux/of_irq.h>
 20#include <linux/usb.h>
 21#include <linux/usb/hcd.h>
 22#include <linux/io.h>
 23#include <linux/dma-mapping.h>
 24
 25#include "ehci.h"
 26
 27#define rdl(off)	__raw_readl(hcd->regs + (off))
 28#define wrl(off, val)	__raw_writel((val), hcd->regs + (off))
 29
 30#define USB_CMD			0x140
 
 
 31#define USB_MODE		0x1a8
 
 
 
 
 32#define USB_CAUSE		0x310
 33#define USB_MASK		0x314
 34#define USB_WINDOW_CTRL(i)	(0x320 + ((i) << 4))
 35#define USB_WINDOW_BASE(i)	(0x324 + ((i) << 4))
 36#define USB_IPG			0x360
 37#define USB_PHY_PWR_CTRL	0x400
 38#define USB_PHY_TX_CTRL		0x420
 39#define USB_PHY_RX_CTRL		0x430
 40#define USB_PHY_IVREF_CTRL	0x440
 41#define USB_PHY_TST_GRP_CTRL	0x450
 42
 
 
 
 
 
 
 
 
 
 
 
 
 43#define DRIVER_DESC "EHCI orion driver"
 44
 45static const char hcd_name[] = "ehci-orion";
 
 
 
 
 
 46
 47static struct hc_driver __read_mostly ehci_orion_hc_driver;
 48
 49/*
 50 * Implement Orion USB controller specification guidelines
 51 */
 52static void orion_usb_phy_v1_setup(struct usb_hcd *hcd)
 53{
 54	/* The below GLs are according to the Orion Errata document */
 55	/*
 56	 * Clear interrupt cause and mask
 57	 */
 58	wrl(USB_CAUSE, 0);
 59	wrl(USB_MASK, 0);
 60
 61	/*
 62	 * Reset controller
 63	 */
 64	wrl(USB_CMD, rdl(USB_CMD) | 0x2);
 65	while (rdl(USB_CMD) & 0x2);
 66
 67	/*
 68	 * GL# USB-10: Set IPG for non start of frame packets
 69	 * Bits[14:8]=0xc
 70	 */
 71	wrl(USB_IPG, (rdl(USB_IPG) & ~0x7f00) | 0xc00);
 72
 73	/*
 74	 * GL# USB-9: USB 2.0 Power Control
 75	 * BG_VSEL[7:6]=0x1
 76	 */
 77	wrl(USB_PHY_PWR_CTRL, (rdl(USB_PHY_PWR_CTRL) & ~0xc0)| 0x40);
 78
 79	/*
 80	 * GL# USB-1: USB PHY Tx Control - force calibration to '8'
 81	 * TXDATA_BLOCK_EN[21]=0x1, EXT_RCAL_EN[13]=0x1, IMP_CAL[6:3]=0x8
 82	 */
 83	wrl(USB_PHY_TX_CTRL, (rdl(USB_PHY_TX_CTRL) & ~0x78) | 0x202040);
 84
 85	/*
 86	 * GL# USB-3 GL# USB-9: USB PHY Rx Control
 87	 * RXDATA_BLOCK_LENGHT[31:30]=0x3, EDGE_DET_SEL[27:26]=0,
 88	 * CDR_FASTLOCK_EN[21]=0, DISCON_THRESHOLD[9:8]=0, SQ_THRESH[7:4]=0x1
 89	 */
 90	wrl(USB_PHY_RX_CTRL, (rdl(USB_PHY_RX_CTRL) & ~0xc2003f0) | 0xc0000010);
 91
 92	/*
 93	 * GL# USB-3 GL# USB-9: USB PHY IVREF Control
 94	 * PLLVDD12[1:0]=0x2, RXVDD[5:4]=0x3, Reserved[19]=0
 95	 */
 96	wrl(USB_PHY_IVREF_CTRL, (rdl(USB_PHY_IVREF_CTRL) & ~0x80003 ) | 0x32);
 97
 98	/*
 99	 * GL# USB-3 GL# USB-9: USB PHY Test Group Control
100	 * REG_FIFO_SQ_RST[15]=0
101	 */
102	wrl(USB_PHY_TST_GRP_CTRL, rdl(USB_PHY_TST_GRP_CTRL) & ~0x8000);
103
104	/*
105	 * Stop and reset controller
106	 */
107	wrl(USB_CMD, rdl(USB_CMD) & ~0x1);
108	wrl(USB_CMD, rdl(USB_CMD) | 0x2);
109	while (rdl(USB_CMD) & 0x2);
110
111	/*
112	 * GL# USB-5 Streaming disable REG_USB_MODE[4]=1
113	 * TBD: This need to be done after each reset!
114	 * GL# USB-4 Setup USB Host mode
115	 */
116	wrl(USB_MODE, 0x13);
117}
118
119static void
120ehci_orion_conf_mbus_windows(struct usb_hcd *hcd,
121			     const struct mbus_dram_target_info *dram)
122{
123	int i;
124
125	for (i = 0; i < 4; i++) {
126		wrl(USB_WINDOW_CTRL(i), 0);
127		wrl(USB_WINDOW_BASE(i), 0);
128	}
129
130	for (i = 0; i < dram->num_cs; i++) {
131		const struct mbus_dram_window *cs = dram->cs + i;
132
133		wrl(USB_WINDOW_CTRL(i), ((cs->size - 1) & 0xffff0000) |
134					(cs->mbus_attr << 8) |
135					(dram->mbus_dram_target_id << 4) | 1);
136		wrl(USB_WINDOW_BASE(i), cs->base);
137	}
138}
139
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
140static int ehci_orion_drv_probe(struct platform_device *pdev)
141{
142	struct orion_ehci_data *pd = dev_get_platdata(&pdev->dev);
143	const struct mbus_dram_target_info *dram;
144	struct resource *res;
145	struct usb_hcd *hcd;
146	struct ehci_hcd *ehci;
147	struct clk *clk;
148	void __iomem *regs;
149	int irq, err;
150	enum orion_ehci_phy_ver phy_version;
 
151
152	if (usb_disabled())
153		return -ENODEV;
154
155	pr_debug("Initializing Orion-SoC USB Host Controller\n");
156
157	if (pdev->dev.of_node)
158		irq = irq_of_parse_and_map(pdev->dev.of_node, 0);
159	else
160		irq = platform_get_irq(pdev, 0);
161	if (irq <= 0) {
162		dev_err(&pdev->dev,
163			"Found HC with no IRQ. Check %s setup!\n",
164			dev_name(&pdev->dev));
165		err = -ENODEV;
166		goto err1;
167	}
168
169	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
170	if (!res) {
171		dev_err(&pdev->dev,
172			"Found HC with no register addr. Check %s setup!\n",
173			dev_name(&pdev->dev));
174		err = -ENODEV;
175		goto err1;
176	}
177
178	/*
179	 * Right now device-tree probed devices don't get dma_mask
180	 * set. Since shared usb code relies on it, set it here for
181	 * now. Once we have dma capability bindings this can go away.
182	 */
183	err = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
184	if (err)
185		goto err1;
186
187	regs = devm_ioremap_resource(&pdev->dev, res);
188	if (IS_ERR(regs)) {
189		err = PTR_ERR(regs);
190		goto err1;
191	}
192
193	/* Not all platforms can gate the clock, so it is not
194	   an error if the clock does not exists. */
195	clk = devm_clk_get(&pdev->dev, NULL);
196	if (!IS_ERR(clk))
197		clk_prepare_enable(clk);
198
199	hcd = usb_create_hcd(&ehci_orion_hc_driver,
200			&pdev->dev, dev_name(&pdev->dev));
201	if (!hcd) {
202		err = -ENOMEM;
203		goto err2;
204	}
205
206	hcd->rsrc_start = res->start;
207	hcd->rsrc_len = resource_size(res);
208	hcd->regs = regs;
209
210	ehci = hcd_to_ehci(hcd);
211	ehci->caps = hcd->regs + 0x100;
212	hcd->has_tt = 1;
213
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
214	/*
215	 * (Re-)program MBUS remapping windows if we are asked to.
216	 */
217	dram = mv_mbus_dram_info();
218	if (dram)
219		ehci_orion_conf_mbus_windows(hcd, dram);
220
221	/*
222	 * setup Orion USB controller.
223	 */
224	if (pdev->dev.of_node)
225		phy_version = EHCI_PHY_NA;
226	else
227		phy_version = pd->phy_version;
228
229	switch (phy_version) {
230	case EHCI_PHY_NA:	/* dont change USB phy settings */
231		break;
232	case EHCI_PHY_ORION:
233		orion_usb_phy_v1_setup(hcd);
234		break;
235	case EHCI_PHY_DD:
236	case EHCI_PHY_KW:
237	default:
238		dev_warn(&pdev->dev, "USB phy version isn't supported.\n");
239	}
240
241	err = usb_add_hcd(hcd, irq, IRQF_SHARED);
242	if (err)
243		goto err3;
244
245	device_wakeup_enable(hcd->self.controller);
246	return 0;
247
248err3:
 
 
 
249	usb_put_hcd(hcd);
250err2:
251	if (!IS_ERR(clk))
252		clk_disable_unprepare(clk);
253err1:
254	dev_err(&pdev->dev, "init %s fail, %d\n",
255		dev_name(&pdev->dev), err);
256
257	return err;
258}
259
260static int ehci_orion_drv_remove(struct platform_device *pdev)
261{
262	struct usb_hcd *hcd = platform_get_drvdata(pdev);
263	struct clk *clk;
264
265	usb_remove_hcd(hcd);
 
 
 
 
266	usb_put_hcd(hcd);
267
268	clk = devm_clk_get(&pdev->dev, NULL);
269	if (!IS_ERR(clk))
270		clk_disable_unprepare(clk);
271	return 0;
272}
273
274static const struct of_device_id ehci_orion_dt_ids[] = {
275	{ .compatible = "marvell,orion-ehci", },
 
276	{},
277};
278MODULE_DEVICE_TABLE(of, ehci_orion_dt_ids);
279
280static struct platform_driver ehci_orion_driver = {
281	.probe		= ehci_orion_drv_probe,
282	.remove		= ehci_orion_drv_remove,
283	.shutdown	= usb_hcd_platform_shutdown,
284	.driver = {
285		.name	= "orion-ehci",
286		.owner  = THIS_MODULE,
287		.of_match_table = ehci_orion_dt_ids,
 
288	},
289};
290
291static int __init ehci_orion_init(void)
292{
293	if (usb_disabled())
294		return -ENODEV;
295
296	pr_info("%s: " DRIVER_DESC "\n", hcd_name);
297
298	ehci_init_driver(&ehci_orion_hc_driver, NULL);
299	return platform_driver_register(&ehci_orion_driver);
300}
301module_init(ehci_orion_init);
302
303static void __exit ehci_orion_cleanup(void)
304{
305	platform_driver_unregister(&ehci_orion_driver);
306}
307module_exit(ehci_orion_cleanup);
308
309MODULE_DESCRIPTION(DRIVER_DESC);
310MODULE_ALIAS("platform:orion-ehci");
311MODULE_AUTHOR("Tzachi Perelstein");
312MODULE_LICENSE("GPL v2");