Loading...
1# SPDX-License-Identifier: GPL-2.0-only
2#
3# Hardware monitoring chip drivers configuration
4#
5
6menuconfig HWMON
7 tristate "Hardware Monitoring support"
8 depends on HAS_IOMEM
9 default y
10 help
11 Hardware monitoring devices let you monitor the hardware health
12 of a system. Most modern motherboards include such a device. It
13 can include temperature sensors, voltage sensors, fan speed
14 sensors and various additional features such as the ability to
15 control the speed of the fans. If you want this support you
16 should say Y here and also to the specific driver(s) for your
17 sensors chip(s) below.
18
19 To find out which specific driver(s) you need, use the
20 sensors-detect script from the lm_sensors package. Read
21 <file:Documentation/hwmon/userspace-tools.rst> for details.
22
23 This support can also be built as a module. If so, the module
24 will be called hwmon.
25
26if HWMON
27
28config HWMON_VID
29 tristate
30
31config HWMON_DEBUG_CHIP
32 bool "Hardware Monitoring Chip debugging messages"
33 help
34 Say Y here if you want the I2C chip drivers to produce a bunch of
35 debug messages to the system log. Select this if you are having
36 a problem with I2C support and want to see more of what is going
37 on.
38
39comment "Native drivers"
40
41config SENSORS_ABITUGURU
42 tristate "Abit uGuru (rev 1 & 2)"
43 depends on (X86 && DMI) || COMPILE_TEST
44 help
45 If you say yes here you get support for the sensor part of the first
46 and second revision of the Abit uGuru chip. The voltage and frequency
47 control parts of the Abit uGuru are not supported. The Abit uGuru
48 chip can be found on Abit uGuru featuring motherboards (most modern
49 Abit motherboards from before end 2005). For more info and a list
50 of which motherboards have which revision see
51 Documentation/hwmon/abituguru.rst
52
53 This driver can also be built as a module. If so, the module
54 will be called abituguru.
55
56config SENSORS_ABITUGURU3
57 tristate "Abit uGuru (rev 3)"
58 depends on (X86 && DMI) || COMPILE_TEST
59 help
60 If you say yes here you get support for the sensor part of the
61 third revision of the Abit uGuru chip. Only reading the sensors
62 and their settings is supported. The third revision of the Abit
63 uGuru chip can be found on recent Abit motherboards (since end
64 2005). For more info and a list of which motherboards have which
65 revision see Documentation/hwmon/abituguru3.rst
66
67 This driver can also be built as a module. If so, the module
68 will be called abituguru3.
69
70config SENSORS_SMPRO
71 tristate "Ampere's Altra SMpro hardware monitoring driver"
72 depends on MFD_SMPRO
73 help
74 If you say yes here you get support for the thermal, voltage,
75 current and power sensors of Ampere's Altra processor family SoC
76 with SMpro co-processor.
77
78config SENSORS_AD7314
79 tristate "Analog Devices AD7314 and compatibles"
80 depends on SPI
81 help
82 If you say yes here you get support for the Analog Devices
83 AD7314, ADT7301 and ADT7302 temperature sensors.
84
85 This driver can also be built as a module. If so, the module
86 will be called ad7314.
87
88config SENSORS_AD7414
89 tristate "Analog Devices AD7414"
90 depends on I2C
91 help
92 If you say yes here you get support for the Analog Devices
93 AD7414 temperature monitoring chip.
94
95 This driver can also be built as a module. If so, the module
96 will be called ad7414.
97
98config SENSORS_AD7418
99 tristate "Analog Devices AD7416, AD7417 and AD7418"
100 depends on I2C
101 help
102 If you say yes here you get support for the Analog Devices
103 AD7416, AD7417 and AD7418 temperature monitoring chips.
104
105 This driver can also be built as a module. If so, the module
106 will be called ad7418.
107
108config SENSORS_ADM1021
109 tristate "Analog Devices ADM1021 and compatibles"
110 depends on I2C
111 depends on SENSORS_LM90=n
112 help
113 If you say yes here you get support for Analog Devices ADM1021
114 and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
115 Genesys Logic GL523SM, National Semiconductor LM84 and TI THMC10.
116
117 This driver can also be built as a module. If so, the module
118 will be called adm1021.
119
120config SENSORS_ADM1025
121 tristate "Analog Devices ADM1025 and compatibles"
122 depends on I2C
123 select HWMON_VID
124 help
125 If you say yes here you get support for Analog Devices ADM1025
126 and Philips NE1619 sensor chips.
127
128 This driver can also be built as a module. If so, the module
129 will be called adm1025.
130
131config SENSORS_ADM1026
132 tristate "Analog Devices ADM1026 and compatibles"
133 depends on I2C
134 select HWMON_VID
135 help
136 If you say yes here you get support for Analog Devices ADM1026
137 sensor chip.
138
139 This driver can also be built as a module. If so, the module
140 will be called adm1026.
141
142config SENSORS_ADM1029
143 tristate "Analog Devices ADM1029"
144 depends on I2C
145 help
146 If you say yes here you get support for Analog Devices ADM1029
147 sensor chip.
148 Very rare chip, please let us know you use it.
149
150 This driver can also be built as a module. If so, the module
151 will be called adm1029.
152
153config SENSORS_ADM1031
154 tristate "Analog Devices ADM1031 and compatibles"
155 depends on I2C
156 help
157 If you say yes here you get support for Analog Devices ADM1031
158 and ADM1030 sensor chips.
159
160 This driver can also be built as a module. If so, the module
161 will be called adm1031.
162
163config SENSORS_ADM1177
164 tristate "Analog Devices ADM1177 and compatibles"
165 depends on I2C
166 help
167 If you say yes here you get support for Analog Devices ADM1177
168 sensor chips.
169
170 This driver can also be built as a module. If so, the module
171 will be called adm1177.
172
173config SENSORS_ADM9240
174 tristate "Analog Devices ADM9240 and compatibles"
175 depends on I2C
176 select HWMON_VID
177 help
178 If you say yes here you get support for Analog Devices ADM9240,
179 Dallas DS1780, National Semiconductor LM81 sensor chips.
180
181 This driver can also be built as a module. If so, the module
182 will be called adm9240.
183
184config SENSORS_ADT7X10
185 tristate
186 select REGMAP
187 help
188 This module contains common code shared by the ADT7310/ADT7320 and
189 ADT7410/ADT7420 temperature monitoring chip drivers.
190
191 If built as a module, the module will be called adt7x10.
192
193config SENSORS_ADT7310
194 tristate "Analog Devices ADT7310/ADT7320"
195 depends on SPI_MASTER
196 select SENSORS_ADT7X10
197 help
198 If you say yes here you get support for the Analog Devices
199 ADT7310 and ADT7320 temperature monitoring chips.
200
201 This driver can also be built as a module. If so, the module
202 will be called adt7310.
203
204config SENSORS_ADT7410
205 tristate "Analog Devices ADT7410/ADT7420"
206 depends on I2C
207 select SENSORS_ADT7X10
208 help
209 If you say yes here you get support for the Analog Devices
210 ADT7410 and ADT7420 temperature monitoring chips.
211
212 This driver can also be built as a module. If so, the module
213 will be called adt7410.
214
215config SENSORS_ADT7411
216 tristate "Analog Devices ADT7411"
217 depends on I2C
218 help
219 If you say yes here you get support for the Analog Devices
220 ADT7411 voltage and temperature monitoring chip.
221
222 This driver can also be built as a module. If so, the module
223 will be called adt7411.
224
225config SENSORS_ADT7462
226 tristate "Analog Devices ADT7462"
227 depends on I2C
228 help
229 If you say yes here you get support for the Analog Devices
230 ADT7462 temperature monitoring chips.
231
232 This driver can also be built as a module. If so, the module
233 will be called adt7462.
234
235config SENSORS_ADT7470
236 tristate "Analog Devices ADT7470"
237 depends on I2C
238 help
239 If you say yes here you get support for the Analog Devices
240 ADT7470 temperature monitoring chips.
241
242 This driver can also be built as a module. If so, the module
243 will be called adt7470.
244
245config SENSORS_ADT7475
246 tristate "Analog Devices ADT7473, ADT7475, ADT7476 and ADT7490"
247 depends on I2C
248 select HWMON_VID
249 help
250 If you say yes here you get support for the Analog Devices
251 ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring
252 chips.
253
254 This driver can also be built as a module. If so, the module
255 will be called adt7475.
256
257config SENSORS_AHT10
258 tristate "Aosong AHT10, AHT20"
259 depends on I2C
260 select CRC8
261 help
262 If you say yes here, you get support for the Aosong AHT10 and AHT20
263 temperature and humidity sensors
264
265 This driver can also be built as a module. If so, the module
266 will be called aht10.
267
268config SENSORS_AQUACOMPUTER_D5NEXT
269 tristate "Aquacomputer D5 Next, Octo, Quadro, Farbwerk, Farbwerk 360, High Flow Next"
270 depends on USB_HID
271 select CRC16
272 help
273 If you say yes here you get support for sensors and fans of
274 the Aquacomputer D5 Next watercooling pump, Octo and Quadro fan
275 controllers, Farbwerk and Farbwerk 360 RGB controllers, High Flow
276 Next sensor, where available.
277
278 This driver can also be built as a module. If so, the module
279 will be called aquacomputer_d5next.
280
281config SENSORS_AS370
282 tristate "Synaptics AS370 SoC hardware monitoring driver"
283 help
284 If you say yes here you get support for the PVT sensors of
285 the Synaptics AS370 SoC
286
287 This driver can also be built as a module. If so, the module
288 will be called as370-hwmon.
289
290
291config SENSORS_ASC7621
292 tristate "Andigilog aSC7621"
293 depends on I2C
294 help
295 If you say yes here you get support for the aSC7621
296 family of SMBus sensors chip found on most Intel X38, X48, X58,
297 945, 965 and 975 desktop boards. Currently supported chips:
298 aSC7621
299 aSC7621a
300
301 This driver can also be built as a module. If so, the module
302 will be called asc7621.
303
304config SENSORS_AXI_FAN_CONTROL
305 tristate "Analog Devices FAN Control HDL Core driver"
306 help
307 If you say yes here you get support for the Analog Devices
308 AXI HDL FAN monitoring core.
309
310 This driver can also be built as a module. If so, the module
311 will be called axi-fan-control
312
313config SENSORS_K8TEMP
314 tristate "AMD Athlon64/FX or Opteron temperature sensor"
315 depends on X86 && PCI
316 help
317 If you say yes here you get support for the temperature
318 sensor(s) inside your CPU. Supported is whole AMD K8
319 microarchitecture. Please note that you will need at least
320 lm-sensors 2.10.1 for proper userspace support.
321
322 This driver can also be built as a module. If so, the module
323 will be called k8temp.
324
325config SENSORS_K10TEMP
326 tristate "AMD Family 10h+ temperature sensor"
327 depends on X86 && PCI && AMD_NB
328 help
329 If you say yes here you get support for the temperature
330 sensor(s) inside your CPU. Supported are later revisions of
331 the AMD Family 10h and all revisions of the AMD Family 11h,
332 12h (Llano), 14h (Brazos), 15h (Bulldozer/Trinity/Kaveri/Carrizo)
333 and 16h (Kabini/Mullins) microarchitectures.
334
335 This driver can also be built as a module. If so, the module
336 will be called k10temp.
337
338config SENSORS_FAM15H_POWER
339 tristate "AMD Family 15h processor power"
340 depends on X86 && PCI && CPU_SUP_AMD
341 help
342 If you say yes here you get support for processor power
343 information of your AMD family 15h CPU.
344
345 This driver can also be built as a module. If so, the module
346 will be called fam15h_power.
347
348config SENSORS_APPLESMC
349 tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)"
350 depends on INPUT && X86
351 select NEW_LEDS
352 select LEDS_CLASS
353 help
354 This driver provides support for the Apple System Management
355 Controller, which provides an accelerometer (Apple Sudden Motion
356 Sensor), light sensors, temperature sensors, keyboard backlight
357 control and fan control.
358
359 Only Intel-based Apple's computers are supported (MacBook Pro,
360 MacBook, MacMini).
361
362 Data from the different sensors, keyboard backlight control and fan
363 control are accessible via sysfs.
364
365 This driver also provides an absolute input class device, allowing
366 the laptop to act as a pinball machine-esque joystick.
367
368 Say Y here if you have an applicable laptop and want to experience
369 the awesome power of applesmc.
370
371config SENSORS_ARM_SCMI
372 tristate "ARM SCMI Sensors"
373 depends on ARM_SCMI_PROTOCOL
374 depends on THERMAL || !THERMAL_OF
375 help
376 This driver provides support for temperature, voltage, current
377 and power sensors available on SCMI based platforms. The actual
378 number and type of sensors exported depend on the platform.
379
380 This driver can also be built as a module. If so, the module
381 will be called scmi-hwmon.
382
383config SENSORS_ARM_SCPI
384 tristate "ARM SCPI Sensors"
385 depends on ARM_SCPI_PROTOCOL
386 depends on THERMAL || !THERMAL_OF
387 help
388 This driver provides support for temperature, voltage, current
389 and power sensors available on ARM Ltd's SCP based platforms. The
390 actual number and type of sensors exported depend on the platform.
391
392config SENSORS_ASB100
393 tristate "Asus ASB100 Bach"
394 depends on (X86 || COMPILE_TEST) && I2C
395 select HWMON_VID
396 help
397 If you say yes here you get support for the ASB100 Bach sensor
398 chip found on some Asus mainboards.
399
400 This driver can also be built as a module. If so, the module
401 will be called asb100.
402
403config SENSORS_ASPEED
404 tristate "ASPEED AST2400/AST2500 PWM and Fan tach driver"
405 depends on ARCH_ASPEED || COMPILE_TEST
406 depends on THERMAL || THERMAL=n
407 select REGMAP
408 help
409 This driver provides support for ASPEED AST2400/AST2500 PWM
410 and Fan Tacho controllers.
411
412 This driver can also be built as a module. If so, the module
413 will be called aspeed_pwm_tacho.
414
415config SENSORS_ATXP1
416 tristate "Attansic ATXP1 VID controller"
417 depends on I2C
418 select HWMON_VID
419 help
420 If you say yes here you get support for the Attansic ATXP1 VID
421 controller.
422
423 If your board have such a chip, you are able to control your CPU
424 core and other voltages.
425
426 This driver can also be built as a module. If so, the module
427 will be called atxp1.
428
429config SENSORS_BT1_PVT
430 tristate "Baikal-T1 Process, Voltage, Temperature sensor driver"
431 depends on MIPS_BAIKAL_T1 || COMPILE_TEST
432 select POLYNOMIAL
433 help
434 If you say yes here you get support for Baikal-T1 PVT sensor
435 embedded into the SoC.
436
437 This driver can also be built as a module. If so, the module will be
438 called bt1-pvt.
439
440config SENSORS_BT1_PVT_ALARMS
441 bool "Enable Baikal-T1 PVT sensor alarms"
442 depends on SENSORS_BT1_PVT
443 help
444 Baikal-T1 PVT IP-block provides threshold registers for each
445 supported sensor. But the corresponding interrupts might be
446 generated by the thresholds comparator only in synchronization with
447 a data conversion. Additionally there is only one sensor data can
448 be converted at a time. All of these makes the interface impossible
449 to be used for the hwmon alarms implementation without periodic
450 switch between the PVT sensors. By default the data conversion is
451 performed on demand from the user-space. If this config is enabled
452 the data conversion will be periodically performed and the data will be
453 saved in the internal driver cache.
454
455config SENSORS_CORSAIR_CPRO
456 tristate "Corsair Commander Pro controller"
457 depends on HID
458 help
459 If you say yes here you get support for the Corsair Commander Pro
460 controller.
461
462 This driver can also be built as a module. If so, the module
463 will be called corsair-cpro.
464
465config SENSORS_CORSAIR_PSU
466 tristate "Corsair PSU HID controller"
467 depends on HID
468 help
469 If you say yes here you get support for Corsair PSUs with a HID
470 interface.
471 Currently this driver supports the (RM/HX)550i, (RM/HX)650i,
472 (RM/HX)750i, (RM/HX)850i, (RM/HX)1000i and HX1200i power supplies
473 by Corsair.
474
475 This driver can also be built as a module. If so, the module
476 will be called corsair-psu.
477
478config SENSORS_DRIVETEMP
479 tristate "Hard disk drives with temperature sensors"
480 depends on SCSI && ATA
481 help
482 If you say yes you get support for the temperature sensor on
483 hard disk drives.
484
485 This driver can also be built as a module. If so, the module
486 will be called drivetemp.
487
488config SENSORS_DS620
489 tristate "Dallas Semiconductor DS620"
490 depends on I2C
491 help
492 If you say yes here you get support for Dallas Semiconductor
493 DS620 sensor chip.
494
495 This driver can also be built as a module. If so, the module
496 will be called ds620.
497
498config SENSORS_DS1621
499 tristate "Dallas Semiconductor DS1621 and compatibles"
500 depends on I2C
501 help
502 If you say yes here you get support for Dallas Semiconductor/Maxim
503 Integrated DS1621 sensor chips and compatible models including:
504
505 - Dallas Semiconductor DS1625
506 - Maxim Integrated DS1631
507 - Maxim Integrated DS1721
508 - Maxim Integrated DS1731
509
510 This driver can also be built as a module. If so, the module
511 will be called ds1621.
512
513config SENSORS_DELL_SMM
514 tristate "Dell laptop SMM BIOS hwmon driver"
515 depends on ACPI_WMI
516 depends on X86
517 imply THERMAL
518 help
519 This hwmon driver adds support for reporting temperature of different
520 sensors and controls the fans on Dell laptops via System Management
521 Mode provided by Dell BIOS.
522
523 When option I8K is also enabled this driver provides legacy /proc/i8k
524 userspace interface for i8kutils package.
525
526config I8K
527 bool "Legacy /proc/i8k interface of Dell laptop SMM BIOS hwmon driver"
528 depends on SENSORS_DELL_SMM
529 depends on PROC_FS
530 help
531 This option enables the legacy /proc/i8k userspace interface of the
532 dell-smm-hwmon driver. The character file /proc/i8k exposes the BIOS
533 version, temperatures and allows control of fan speeds of some Dell
534 laptops. Sometimes it also reports power and hotkey status.
535
536 This interface is required to run programs from the i8kutils package.
537
538 Say Y if you intend to run userspace programs that use this interface.
539 Say N otherwise.
540
541config SENSORS_DA9052_ADC
542 tristate "Dialog DA9052/DA9053 ADC"
543 depends on PMIC_DA9052
544 help
545 Say y here to support the ADC found on Dialog Semiconductor
546 DA9052-BC and DA9053-AA/Bx PMICs.
547
548 This driver can also be built as module. If so, the module
549 will be called da9052-hwmon.
550
551config SENSORS_DA9055
552 tristate "Dialog Semiconductor DA9055 ADC"
553 depends on MFD_DA9055
554 help
555 If you say yes here you get support for ADC on the Dialog
556 Semiconductor DA9055 PMIC.
557
558 This driver can also be built as a module. If so, the module
559 will be called da9055-hwmon.
560
561config SENSORS_I5K_AMB
562 tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets"
563 depends on PCI
564 help
565 If you say yes here you get support for FB-DIMM AMB temperature
566 monitoring chips on systems with the Intel 5000 series chipset.
567
568 This driver can also be built as a module. If so, the module
569 will be called i5k_amb.
570
571config SENSORS_SPARX5
572 tristate "Sparx5 SoC temperature sensor"
573 depends on ARCH_SPARX5 || COMPILE_TEST
574 help
575 If you say yes here you get support for temperature monitoring
576 with the Microchip Sparx5 SoC.
577
578 This driver can also be built as a module. If so, the module
579 will be called sparx5-temp.
580
581config SENSORS_F71805F
582 tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG"
583 depends on !PPC
584 help
585 If you say yes here you get support for hardware monitoring
586 features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG
587 Super-I/O chips.
588
589 This driver can also be built as a module. If so, the module
590 will be called f71805f.
591
592config SENSORS_F71882FG
593 tristate "Fintek F71882FG and compatibles"
594 depends on !PPC
595 help
596 If you say yes here you get support for hardware monitoring
597 features of many Fintek Super-I/O (LPC) chips. The currently
598 supported chips are:
599 F71808E/A
600 F71858FG
601 F71862FG
602 F71863FG
603 F71869F/E/A
604 F71882FG
605 F71883FG
606 F71889FG/ED/A
607 F8000
608 F81801U
609 F81865F
610
611 This driver can also be built as a module. If so, the module
612 will be called f71882fg.
613
614config SENSORS_F75375S
615 tristate "Fintek F75375S/SP, F75373 and F75387"
616 depends on I2C
617 help
618 If you say yes here you get support for hardware monitoring
619 features of the Fintek F75375S/SP, F75373 and F75387
620
621 This driver can also be built as a module. If so, the module
622 will be called f75375s.
623
624config SENSORS_GSC
625 tristate "Gateworks System Controller ADC"
626 depends on MFD_GATEWORKS_GSC
627 help
628 Support for the Gateworks System Controller A/D converters.
629
630 To compile this driver as a module, choose M here:
631 the module will be called gsc-hwmon.
632
633config SENSORS_MC13783_ADC
634 tristate "Freescale MC13783/MC13892 ADC"
635 depends on MFD_MC13XXX
636 help
637 Support for the A/D converter on MC13783 and MC13892 PMIC.
638
639config SENSORS_FSCHMD
640 tristate "Fujitsu Siemens Computers sensor chips"
641 depends on (X86 || COMPILE_TEST) && I2C
642 help
643 If you say yes here you get support for the following Fujitsu
644 Siemens Computers (FSC) sensor chips: Poseidon, Scylla, Hermes,
645 Heimdall, Heracles, Hades and Syleus including support for the
646 integrated watchdog.
647
648 This is a merged driver for FSC sensor chips replacing the fscpos,
649 fscscy and fscher drivers and adding support for several other FSC
650 sensor chips.
651
652 This driver can also be built as a module. If so, the module
653 will be called fschmd.
654
655config SENSORS_FTSTEUTATES
656 tristate "Fujitsu Technology Solutions sensor chip Teutates"
657 depends on I2C && WATCHDOG
658 select WATCHDOG_CORE
659 help
660 If you say yes here you get support for the Fujitsu Technology
661 Solutions (FTS) sensor chip "Teutates" including support for
662 the integrated watchdog.
663
664 This driver can also be built as a module. If so, the module
665 will be called ftsteutates.
666
667config SENSORS_GIGABYTE_WATERFORCE
668 tristate "Gigabyte Waterforce X240/X280/X360 AIO CPU coolers"
669 depends on USB_HID
670 help
671 If you say yes here you get support for hardware monitoring for the
672 Gigabyte Waterforce X240/X280/X360 all-in-one CPU liquid coolers.
673
674 This driver can also be built as a module. If so, the module
675 will be called gigabyte_waterforce.
676
677config SENSORS_GL518SM
678 tristate "Genesys Logic GL518SM"
679 depends on I2C
680 help
681 If you say yes here you get support for Genesys Logic GL518SM
682 sensor chips.
683
684 This driver can also be built as a module. If so, the module
685 will be called gl518sm.
686
687config SENSORS_GL520SM
688 tristate "Genesys Logic GL520SM"
689 depends on I2C
690 select HWMON_VID
691 help
692 If you say yes here you get support for Genesys Logic GL520SM
693 sensor chips.
694
695 This driver can also be built as a module. If so, the module
696 will be called gl520sm.
697
698config SENSORS_G760A
699 tristate "GMT G760A"
700 depends on I2C
701 help
702 If you say yes here you get support for Global Mixed-mode
703 Technology Inc G760A fan speed PWM controller chips.
704
705 This driver can also be built as a module. If so, the module
706 will be called g760a.
707
708config SENSORS_G762
709 tristate "GMT G762 and G763"
710 depends on I2C
711 help
712 If you say yes here you get support for Global Mixed-mode
713 Technology Inc G762 and G763 fan speed PWM controller chips.
714
715 This driver can also be built as a module. If so, the module
716 will be called g762.
717
718config SENSORS_GPIO_FAN
719 tristate "GPIO fan"
720 depends on OF_GPIO
721 depends on GPIOLIB || COMPILE_TEST
722 depends on THERMAL || THERMAL=n
723 help
724 If you say yes here you get support for fans connected to GPIO lines.
725
726 This driver can also be built as a module. If so, the module
727 will be called gpio-fan.
728
729config SENSORS_GXP_FAN_CTRL
730 tristate "HPE GXP fan controller"
731 depends on ARCH_HPE_GXP || COMPILE_TEST
732 help
733 If you say yes here you get support for GXP fan control functionality.
734
735 The GXP controls fan function via the CPLD through the use of PWM
736 registers. This driver reports status and pwm setting of the fans.
737
738config SENSORS_HIH6130
739 tristate "Honeywell Humidicon HIH-6130 humidity/temperature sensor"
740 depends on I2C
741 help
742 If you say yes here you get support for Honeywell Humidicon
743 HIH-6130 and HIH-6131 Humidicon humidity sensors.
744
745 This driver can also be built as a module. If so, the module
746 will be called hih6130.
747
748config SENSORS_HS3001
749 tristate "Renesas HS3001 humidity and temperature sensors"
750 depends on I2C
751 help
752 If you say yes here you get support for the Renesas HS3001,
753 to HS3004 humidity and temperature sensors.
754
755 This driver can also be built as a module. If so, the module
756 will be called hs3001.
757
758config SENSORS_IBMAEM
759 tristate "IBM Active Energy Manager temperature/power sensors and control"
760 select IPMI_SI
761 depends on IPMI_HANDLER
762 help
763 If you say yes here you get support for the temperature and
764 power sensors and capping hardware in various IBM System X
765 servers that support Active Energy Manager. This includes
766 the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2,
767 and certain HC10/HS2x/LS2x/QS2x blades.
768
769 This driver can also be built as a module. If so, the module
770 will be called ibmaem.
771
772config SENSORS_IBMPEX
773 tristate "IBM PowerExecutive temperature/power sensors"
774 select IPMI_SI
775 depends on IPMI_HANDLER
776 help
777 If you say yes here you get support for the temperature and
778 power sensors in various IBM System X servers that support
779 PowerExecutive. So far this includes the x3350, x3550, x3650,
780 x3655, and x3755; the x3800, x3850, and x3950 models that have
781 PCI Express; and some of the HS2x, LS2x, and QS2x blades.
782
783 This driver can also be built as a module. If so, the module
784 will be called ibmpex.
785
786config SENSORS_IBMPOWERNV
787 tristate "IBM POWERNV platform sensors"
788 depends on PPC_POWERNV
789 default y
790 help
791 If you say yes here you get support for the temperature/fan/power
792 sensors on your PowerNV platform.
793
794 This driver can also be built as a module. If so, the module
795 will be called ibmpowernv.
796
797config SENSORS_IIO_HWMON
798 tristate "Hwmon driver that uses channels specified via iio maps"
799 depends on IIO
800 help
801 This is a platform driver that in combination with a suitable
802 map allows IIO devices to provide basic hwmon functionality
803 for those channels specified in the map. This map can be provided
804 either via platform data or the device tree bindings.
805
806config SENSORS_I5500
807 tristate "Intel 5500/5520/X58 temperature sensor"
808 depends on X86 && PCI
809 help
810 If you say yes here you get support for the temperature
811 sensor inside the Intel 5500, 5520 and X58 chipsets.
812
813 This driver can also be built as a module. If so, the module
814 will be called i5500_temp.
815
816config SENSORS_CORETEMP
817 tristate "Intel Core/Core2/Atom temperature sensor"
818 depends on X86
819 help
820 If you say yes here you get support for the temperature
821 sensor inside your CPU. Most of the family 6 CPUs
822 are supported. Check Documentation/hwmon/coretemp.rst for details.
823
824config SENSORS_IT87
825 tristate "ITE IT87xx and compatibles"
826 depends on !PPC
827 select HWMON_VID
828 help
829 If you say yes here you get support for ITE IT8705F, IT8712F, IT8716F,
830 IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8732F, IT8758E,
831 IT8771E, IT8772E, IT8781F, IT8782F, IT8783E/F, IT8786E, IT8790E,
832 IT8603E, IT8620E, IT8623E, and IT8628E sensor chips, and the SiS950
833 clone.
834
835 This driver can also be built as a module. If so, the module
836 will be called it87.
837
838config SENSORS_JC42
839 tristate "JEDEC JC42.4 compliant memory module temperature sensors"
840 depends on I2C
841 select REGMAP_I2C
842 help
843 If you say yes here, you get support for JEDEC JC42.4 compliant
844 temperature sensors, which are used on many DDR3 memory modules for
845 mobile devices and servers. Support will include, but not be limited
846 to, ADT7408, AT30TS00, CAT34TS02, CAT6095, MAX6604, MCP9804, MCP9805,
847 MCP9808, MCP98242, MCP98243, MCP98244, MCP9843, SE97, SE98,
848 STTS424(E), STTS2002, STTS3000, TSE2002, TSE2004, TS3000, and TS3001.
849
850 This driver can also be built as a module. If so, the module
851 will be called jc42.
852
853config SENSORS_POWERZ
854 tristate "ChargerLAB POWER-Z USB-C tester"
855 depends on USB
856 help
857 If you say yes here you get support for ChargerLAB POWER-Z series of
858 USB-C charging testers.
859
860 This driver can also be built as a module. If so, the module
861 will be called powerz.
862
863config SENSORS_POWR1220
864 tristate "Lattice POWR1220 Power Monitoring"
865 depends on I2C
866 help
867 If you say yes here you get access to the hardware monitoring
868 functions of the Lattice POWR1220 isp Power Supply Monitoring,
869 Sequencing and Margining Controller.
870
871 This driver can also be built as a module. If so, the module
872 will be called powr1220.
873
874config SENSORS_LAN966X
875 tristate "Microchip LAN966x Hardware Monitoring"
876 depends on SOC_LAN966 || COMPILE_TEST
877 select REGMAP
878 select POLYNOMIAL
879 help
880 If you say yes here you get support for temperature monitoring
881 on the Microchip LAN966x SoC.
882
883 This driver can also be built as a module. If so, the module
884 will be called lan966x-hwmon.
885
886config SENSORS_LINEAGE
887 tristate "Lineage Compact Power Line Power Entry Module"
888 depends on I2C
889 help
890 If you say yes here you get support for the Lineage Compact Power Line
891 series of DC/DC and AC/DC converters such as CP1800, CP2000AC,
892 CP2000DC, CP2725, and others.
893
894 This driver can also be built as a module. If so, the module
895 will be called lineage-pem.
896
897config SENSORS_LOCHNAGAR
898 tristate "Lochnagar Hardware Monitor"
899 depends on MFD_LOCHNAGAR
900 help
901 If you say yes here you get support for Lochnagar 2 temperature,
902 voltage and current sensors abilities.
903
904 This driver can also be built as a module. If so, the module
905 will be called lochnagar-hwmon.
906
907config SENSORS_LTC2945
908 tristate "Linear Technology LTC2945"
909 depends on I2C
910 select REGMAP_I2C
911 help
912 If you say yes here you get support for Linear Technology LTC2945
913 I2C System Monitor.
914
915 This driver can also be built as a module. If so, the module will
916 be called ltc2945.
917
918config SENSORS_LTC2947
919 tristate
920
921config SENSORS_LTC2947_I2C
922 tristate "Analog Devices LTC2947 High Precision Power and Energy Monitor over I2C"
923 depends on I2C
924 select REGMAP_I2C
925 select SENSORS_LTC2947
926 help
927 If you say yes here you get support for Linear Technology LTC2947
928 I2C High Precision Power and Energy Monitor
929
930 This driver can also be built as a module. If so, the module will
931 be called ltc2947-i2c.
932
933config SENSORS_LTC2947_SPI
934 tristate "Analog Devices LTC2947 High Precision Power and Energy Monitor over SPI"
935 depends on SPI_MASTER
936 select REGMAP_SPI
937 select SENSORS_LTC2947
938 help
939 If you say yes here you get support for Linear Technology LTC2947
940 SPI High Precision Power and Energy Monitor
941
942 This driver can also be built as a module. If so, the module will
943 be called ltc2947-spi.
944
945config SENSORS_LTC2990
946 tristate "Linear Technology LTC2990"
947 depends on I2C
948 help
949 If you say yes here you get support for Linear Technology LTC2990
950 I2C System Monitor. The LTC2990 supports a combination of voltage,
951 current and temperature monitoring.
952
953 This driver can also be built as a module. If so, the module will
954 be called ltc2990.
955
956config SENSORS_LTC2991
957 tristate "Analog Devices LTC2991"
958 depends on I2C
959 help
960 If you say yes here you get support for Analog Devices LTC2991
961 Octal I2C Voltage, Current, and Temperature Monitor. The LTC2991
962 supports a combination of voltage, current and temperature monitoring.
963
964 This driver can also be built as a module. If so, the module will
965 be called ltc2991.
966
967config SENSORS_LTC2992
968 tristate "Linear Technology LTC2992"
969 depends on I2C
970 depends on GPIOLIB
971 help
972 If you say yes here you get support for Linear Technology LTC2992
973 I2C System Monitor. The LTC2992 measures current, voltage, and
974 power of two supplies.
975
976 This driver can also be built as a module. If so, the module will
977 be called ltc2992.
978
979config SENSORS_LTC4151
980 tristate "Linear Technology LTC4151"
981 depends on I2C
982 help
983 If you say yes here you get support for Linear Technology LTC4151
984 High Voltage I2C Current and Voltage Monitor interface.
985
986 This driver can also be built as a module. If so, the module will
987 be called ltc4151.
988
989config SENSORS_LTC4215
990 tristate "Linear Technology LTC4215"
991 depends on I2C
992 help
993 If you say yes here you get support for Linear Technology LTC4215
994 Hot Swap Controller I2C interface.
995
996 This driver can also be built as a module. If so, the module will
997 be called ltc4215.
998
999config SENSORS_LTC4222
1000 tristate "Linear Technology LTC4222"
1001 depends on I2C
1002 select REGMAP_I2C
1003 help
1004 If you say yes here you get support for Linear Technology LTC4222
1005 Dual Hot Swap Controller I2C interface.
1006
1007 This driver can also be built as a module. If so, the module will
1008 be called ltc4222.
1009
1010config SENSORS_LTC4245
1011 tristate "Linear Technology LTC4245"
1012 depends on I2C
1013 help
1014 If you say yes here you get support for Linear Technology LTC4245
1015 Multiple Supply Hot Swap Controller I2C interface.
1016
1017 This driver can also be built as a module. If so, the module will
1018 be called ltc4245.
1019
1020config SENSORS_LTC4260
1021 tristate "Linear Technology LTC4260"
1022 depends on I2C
1023 select REGMAP_I2C
1024 help
1025 If you say yes here you get support for Linear Technology LTC4260
1026 Positive Voltage Hot Swap Controller I2C interface.
1027
1028 This driver can also be built as a module. If so, the module will
1029 be called ltc4260.
1030
1031config SENSORS_LTC4261
1032 tristate "Linear Technology LTC4261"
1033 depends on I2C
1034 help
1035 If you say yes here you get support for Linear Technology LTC4261
1036 Negative Voltage Hot Swap Controller I2C interface.
1037
1038 This driver can also be built as a module. If so, the module will
1039 be called ltc4261.
1040
1041config SENSORS_LTQ_CPUTEMP
1042 bool "Lantiq cpu temperature sensor driver"
1043 depends on SOC_XWAY
1044 help
1045 If you say yes here you get support for the temperature
1046 sensor inside your CPU.
1047
1048config SENSORS_MAX1111
1049 tristate "Maxim MAX1111 Serial 8-bit ADC chip and compatibles"
1050 depends on SPI_MASTER
1051 help
1052 Say y here to support Maxim's MAX1110, MAX1111, MAX1112, and MAX1113
1053 ADC chips.
1054
1055 This driver can also be built as a module. If so, the module
1056 will be called max1111.
1057
1058config SENSORS_MAX127
1059 tristate "Maxim MAX127 12-bit 8-channel Data Acquisition System"
1060 depends on I2C
1061 help
1062 Say y here to support Maxim's MAX127 DAS chips.
1063
1064 This driver can also be built as a module. If so, the module
1065 will be called max127.
1066
1067config SENSORS_MAX16065
1068 tristate "Maxim MAX16065 System Manager and compatibles"
1069 depends on I2C
1070 help
1071 If you say yes here you get support for hardware monitoring
1072 capabilities of the following Maxim System Manager chips.
1073 MAX16065
1074 MAX16066
1075 MAX16067
1076 MAX16068
1077 MAX16070
1078 MAX16071
1079
1080 This driver can also be built as a module. If so, the module
1081 will be called max16065.
1082
1083config SENSORS_MAX1619
1084 tristate "Maxim MAX1619 sensor chip"
1085 depends on I2C
1086 help
1087 If you say yes here you get support for MAX1619 sensor chip.
1088
1089 This driver can also be built as a module. If so, the module
1090 will be called max1619.
1091
1092config SENSORS_MAX1668
1093 tristate "Maxim MAX1668 and compatibles"
1094 depends on I2C
1095 help
1096 If you say yes here you get support for MAX1668, MAX1989 and
1097 MAX1805 chips.
1098
1099 This driver can also be built as a module. If so, the module
1100 will be called max1668.
1101
1102config SENSORS_MAX197
1103 tristate "Maxim MAX197 and compatibles"
1104 help
1105 Support for the Maxim MAX197 A/D converter.
1106 Support will include, but not be limited to, MAX197, and MAX199.
1107
1108 This driver can also be built as a module. If so, the module
1109 will be called max197.
1110
1111config SENSORS_MAX31722
1112 tristate "MAX31722 temperature sensor"
1113 depends on SPI
1114 help
1115 Support for the Maxim Integrated MAX31722/MAX31723 digital
1116 thermometers/thermostats operating over an SPI interface.
1117
1118 This driver can also be built as a module. If so, the module
1119 will be called max31722.
1120
1121config SENSORS_MAX31730
1122 tristate "MAX31730 temperature sensor"
1123 depends on I2C
1124 help
1125 Support for the Maxim Integrated MAX31730 3-Channel Remote
1126 Temperature Sensor.
1127
1128 This driver can also be built as a module. If so, the module
1129 will be called max31730.
1130
1131config SENSORS_MAX31760
1132 tristate "MAX31760 fan speed controller"
1133 depends on I2C
1134 select REGMAP_I2C
1135 help
1136 Support for the Analog Devices MAX31760 Precision Fan-Speed
1137 Controller. MAX31760 integrates temperature sensing along with
1138 precision PWM fan control.
1139
1140 This driver can also be built as a module. If so, the module
1141 will be called max31760.
1142
1143config MAX31827
1144 tristate "MAX31827 low-power temperature switch and similar devices"
1145 depends on I2C
1146 select REGMAP_I2C
1147 help
1148 If you say yes here you get support for MAX31827, MAX31828 and
1149 MAX31829 low-power temperature switches and sensors connected with I2C.
1150
1151 This driver can also be built as a module. If so, the module
1152 will be called max31827.
1153
1154config SENSORS_MAX6620
1155 tristate "Maxim MAX6620 fan controller"
1156 depends on I2C
1157 help
1158 If you say yes here you get support for the MAX6620
1159 fan controller.
1160
1161 This driver can also be built as a module. If so, the module
1162 will be called max6620.
1163
1164config SENSORS_MAX6621
1165 tristate "Maxim MAX6621 sensor chip"
1166 depends on I2C
1167 select REGMAP_I2C
1168 help
1169 If you say yes here you get support for MAX6621 sensor chip.
1170 MAX6621 is a PECI-to-I2C translator provides an efficient,
1171 low-cost solution for PECI-to-SMBus/I2C protocol conversion.
1172 It allows reading the temperature from the PECI-compliant
1173 host directly from up to four PECI-enabled CPUs.
1174
1175 This driver can also be built as a module. If so, the module
1176 will be called max6621.
1177
1178config SENSORS_MAX6639
1179 tristate "Maxim MAX6639 sensor chip"
1180 depends on I2C
1181 help
1182 If you say yes here you get support for the MAX6639
1183 sensor chips.
1184
1185 This driver can also be built as a module. If so, the module
1186 will be called max6639.
1187
1188config SENSORS_MAX6642
1189 tristate "Maxim MAX6642 sensor chip"
1190 depends on I2C
1191 depends on SENSORS_LM90=n
1192 help
1193 If you say yes here you get support for MAX6642 sensor chip.
1194 MAX6642 is a SMBus-Compatible Remote/Local Temperature Sensor
1195 with Overtemperature Alarm from Maxim.
1196
1197 This driver can also be built as a module. If so, the module
1198 will be called max6642.
1199
1200config SENSORS_MAX6650
1201 tristate "Maxim MAX6650 sensor chip"
1202 depends on I2C
1203 depends on THERMAL || THERMAL=n
1204 help
1205 If you say yes here you get support for the MAX6650 / MAX6651
1206 sensor chips.
1207
1208 This driver can also be built as a module. If so, the module
1209 will be called max6650.
1210
1211config SENSORS_MAX6697
1212 tristate "Maxim MAX6697 and compatibles"
1213 depends on I2C
1214 help
1215 If you say yes here you get support for MAX6581, MAX6602, MAX6622,
1216 MAX6636, MAX6689, MAX6693, MAX6694, MAX6697, MAX6698, and MAX6699
1217 temperature sensor chips.
1218
1219 This driver can also be built as a module. If so, the module
1220 will be called max6697.
1221
1222config SENSORS_MAX31790
1223 tristate "Maxim MAX31790 sensor chip"
1224 depends on I2C
1225 help
1226 If you say yes here you get support for 6-Channel PWM-Output
1227 Fan RPM Controller.
1228
1229 This driver can also be built as a module. If so, the module
1230 will be called max31790.
1231
1232config SENSORS_MC34VR500
1233 tristate "NXP MC34VR500 hardware monitoring driver"
1234 depends on I2C
1235 help
1236 If you say yes here you get support for the temperature and input
1237 voltage sensors of the NXP MC34VR500.
1238
1239config SENSORS_MCP3021
1240 tristate "Microchip MCP3021 and compatibles"
1241 depends on I2C
1242 help
1243 If you say yes here you get support for MCP3021 and MCP3221.
1244 The MCP3021 is a A/D converter (ADC) with 10-bit and the MCP3221
1245 with 12-bit resolution.
1246
1247 This driver can also be built as a module. If so, the module
1248 will be called mcp3021.
1249
1250config SENSORS_MLXREG_FAN
1251 tristate "Mellanox FAN driver"
1252 depends on MELLANOX_PLATFORM
1253 imply THERMAL
1254 select REGMAP
1255 help
1256 This option enables support for the FAN control on the Mellanox
1257 Ethernet and InfiniBand switches. The driver can be activated by the
1258 platform device add call. Say Y to enable these. To compile this
1259 driver as a module, choose 'M' here: the module will be called
1260 mlxreg-fan.
1261
1262config SENSORS_TC654
1263 tristate "Microchip TC654/TC655 and compatibles"
1264 depends on I2C
1265 help
1266 If you say yes here you get support for TC654 and TC655.
1267 The TC654 and TC655 are PWM mode fan speed controllers with
1268 FanSense technology for use with brushless DC fans.
1269
1270 This driver can also be built as a module. If so, the module
1271 will be called tc654.
1272
1273config SENSORS_TPS23861
1274 tristate "Texas Instruments TPS23861 PoE PSE"
1275 depends on I2C
1276 select REGMAP_I2C
1277 help
1278 If you say yes here you get support for Texas Instruments
1279 TPS23861 802.3at PoE PSE chips.
1280
1281 This driver can also be built as a module. If so, the module
1282 will be called tps23861.
1283
1284config SENSORS_MENF21BMC_HWMON
1285 tristate "MEN 14F021P00 BMC Hardware Monitoring"
1286 depends on MFD_MENF21BMC
1287 help
1288 Say Y here to include support for the MEN 14F021P00 BMC
1289 hardware monitoring.
1290
1291 This driver can also be built as a module. If so the module
1292 will be called menf21bmc_hwmon.
1293
1294config SENSORS_MR75203
1295 tristate "Moortec Semiconductor MR75203 PVT Controller"
1296 select REGMAP_MMIO
1297 help
1298 If you say yes here you get support for Moortec MR75203
1299 PVT controller.
1300
1301 This driver can also be built as a module. If so, the module
1302 will be called mr75203.
1303
1304config SENSORS_ADCXX
1305 tristate "National Semiconductor ADCxxxSxxx"
1306 depends on SPI_MASTER
1307 help
1308 If you say yes here you get support for the National Semiconductor
1309 ADC<bb><c>S<sss> chip family, where
1310 * bb is the resolution in number of bits (8, 10, 12)
1311 * c is the number of channels (1, 2, 4, 8)
1312 * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500
1313 kSPS and 101 for 1 MSPS)
1314
1315 Examples : ADC081S101, ADC124S501, ...
1316
1317 This driver can also be built as a module. If so, the module
1318 will be called adcxx.
1319
1320config SENSORS_LM63
1321 tristate "National Semiconductor LM63 and compatibles"
1322 depends on I2C
1323 help
1324 If you say yes here you get support for the National
1325 Semiconductor LM63, LM64, and LM96163 remote diode digital temperature
1326 sensors with integrated fan control. Such chips are found
1327 on the Tyan S4882 (Thunder K8QS Pro) motherboard, among
1328 others.
1329
1330 This driver can also be built as a module. If so, the module
1331 will be called lm63.
1332
1333config SENSORS_LM70
1334 tristate "National Semiconductor LM70 and compatibles"
1335 depends on SPI_MASTER
1336 help
1337 If you say yes here you get support for the National Semiconductor
1338 LM70, LM71, LM74 and Texas Instruments TMP121/TMP123, TMP122/TMP124,
1339 TMP125 digital temperature sensor chips.
1340
1341 This driver can also be built as a module. If so, the module
1342 will be called lm70.
1343
1344config SENSORS_LM73
1345 tristate "National Semiconductor LM73"
1346 depends on I2C
1347 help
1348 If you say yes here you get support for National Semiconductor LM73
1349 sensor chips.
1350 This driver can also be built as a module. If so, the module
1351 will be called lm73.
1352
1353config SENSORS_LM75
1354 tristate "National Semiconductor LM75 and compatibles"
1355 depends on I2C
1356 select REGMAP_I2C
1357 help
1358 If you say yes here you get support for one common type of
1359 temperature sensor chip, with models including:
1360
1361 - Analog Devices ADT75
1362 - Atmel (now Microchip) AT30TS74
1363 - Dallas Semiconductor DS75, DS1775 and DS7505
1364 - Global Mixed-mode Technology (GMT) G751
1365 - Maxim MAX6625 and MAX6626
1366 - Microchip MCP980x
1367 - National Semiconductor LM75, LM75A
1368 - NXP's LM75A
1369 - ST Microelectronics STDS75
1370 - ST Microelectronics STLM75
1371 - TelCom (now Microchip) TCN75
1372 - Texas Instruments TMP100, TMP101, TMP105, TMP112, TMP75,
1373 TMP175, TMP275
1374
1375 This driver supports driver model based binding through board
1376 specific I2C device tables.
1377
1378 It also supports the "legacy" style of driver binding. To use
1379 that with some chips which don't replicate LM75 quirks exactly,
1380 you may need the "force" module parameter.
1381
1382 This driver can also be built as a module. If so, the module
1383 will be called lm75.
1384
1385config SENSORS_LM77
1386 tristate "National Semiconductor LM77"
1387 depends on I2C
1388 help
1389 If you say yes here you get support for National Semiconductor LM77
1390 sensor chips.
1391
1392 This driver can also be built as a module. If so, the module
1393 will be called lm77.
1394
1395config SENSORS_LM78
1396 tristate "National Semiconductor LM78 and compatibles"
1397 depends on I2C
1398 select HWMON_VID
1399 help
1400 If you say yes here you get support for National Semiconductor LM78,
1401 LM78-J and LM79.
1402
1403 This driver can also be built as a module. If so, the module
1404 will be called lm78.
1405
1406config SENSORS_LM80
1407 tristate "National Semiconductor LM80 and LM96080"
1408 depends on I2C
1409 help
1410 If you say yes here you get support for National Semiconductor
1411 LM80 and LM96080 sensor chips.
1412
1413 This driver can also be built as a module. If so, the module
1414 will be called lm80.
1415
1416config SENSORS_LM83
1417 tristate "National Semiconductor LM83 and compatibles"
1418 depends on I2C
1419 select REGMAP
1420 help
1421 If you say yes here you get support for National Semiconductor
1422 LM82 and LM83 sensor chips.
1423
1424 This driver can also be built as a module. If so, the module
1425 will be called lm83.
1426
1427config SENSORS_LM85
1428 tristate "National Semiconductor LM85 and compatibles"
1429 depends on I2C
1430 select HWMON_VID
1431 help
1432 If you say yes here you get support for National Semiconductor LM85
1433 sensor chips and clones: ADM1027, ADT7463, ADT7468, EMC6D100,
1434 EMC6D101, EMC6D102, and EMC6D103.
1435
1436 This driver can also be built as a module. If so, the module
1437 will be called lm85.
1438
1439config SENSORS_LM87
1440 tristate "National Semiconductor LM87 and compatibles"
1441 depends on I2C
1442 select HWMON_VID
1443 help
1444 If you say yes here you get support for National Semiconductor LM87
1445 and Analog Devices ADM1024 sensor chips.
1446
1447 This driver can also be built as a module. If so, the module
1448 will be called lm87.
1449
1450config SENSORS_LM90
1451 tristate "National Semiconductor LM90 and compatibles"
1452 depends on I2C
1453 help
1454 If you say yes here you get support for National Semiconductor LM84,
1455 LM90, LM86, LM89 and LM99, Analog Devices ADM1020, ADM2021, ADM1021A,
1456 ADM1023, ADM1032, ADT7461, ADT7461A, ADT7481, ADT7482, and ADT7483A,
1457 Maxim MAX1617, MAX6642, MAX6646, MAX6647, MAX6648, MAX6649, MAX6654,
1458 MAX6657, MAX6658, MAX6659, MAX6680, MAX6681, MAX6692, MAX6695,
1459 MAX6696,
1460 ON Semiconductor NCT1008, NCT210, NCT72, NCT214, NCT218,
1461 Winbond/Nuvoton W83L771W/G/AWG/ASG,
1462 Philips NE1618, SA56004, GMT G781, Texas Instruments TMP451 and TMP461
1463 sensor chips.
1464
1465 This driver can also be built as a module. If so, the module
1466 will be called lm90.
1467
1468config SENSORS_LM92
1469 tristate "National Semiconductor LM92 and compatibles"
1470 depends on I2C
1471 help
1472 If you say yes here you get support for National Semiconductor LM92
1473 and Maxim MAX6635 sensor chips.
1474
1475 This driver can also be built as a module. If so, the module
1476 will be called lm92.
1477
1478config SENSORS_LM93
1479 tristate "National Semiconductor LM93 and compatibles"
1480 depends on I2C
1481 select HWMON_VID
1482 help
1483 If you say yes here you get support for National Semiconductor LM93,
1484 LM94, and compatible sensor chips.
1485
1486 This driver can also be built as a module. If so, the module
1487 will be called lm93.
1488
1489config SENSORS_LM95234
1490 tristate "National Semiconductor LM95234 and compatibles"
1491 depends on I2C
1492 help
1493 If you say yes here you get support for the LM95233 and LM95234
1494 temperature sensor chips.
1495
1496 This driver can also be built as a module. If so, the module
1497 will be called lm95234.
1498
1499config SENSORS_LM95241
1500 tristate "National Semiconductor LM95241 and compatibles"
1501 depends on I2C
1502 help
1503 If you say yes here you get support for LM95231 and LM95241 sensor
1504 chips.
1505
1506 This driver can also be built as a module. If so, the module
1507 will be called lm95241.
1508
1509config SENSORS_LM95245
1510 tristate "National Semiconductor LM95245 and compatibles"
1511 depends on I2C
1512 select REGMAP_I2C
1513 help
1514 If you say yes here you get support for LM95235 and LM95245
1515 temperature sensor chips.
1516
1517 This driver can also be built as a module. If so, the module
1518 will be called lm95245.
1519
1520config SENSORS_PC87360
1521 tristate "National Semiconductor PC87360 family"
1522 depends on !PPC
1523 select HWMON_VID
1524 help
1525 If you say yes here you get access to the hardware monitoring
1526 functions of the National Semiconductor PC8736x Super-I/O chips.
1527 The PC87360, PC87363 and PC87364 only have fan monitoring and
1528 control. The PC87365 and PC87366 additionally have voltage and
1529 temperature monitoring.
1530
1531 This driver can also be built as a module. If so, the module
1532 will be called pc87360.
1533
1534config SENSORS_PC87427
1535 tristate "National Semiconductor PC87427"
1536 depends on !PPC
1537 help
1538 If you say yes here you get access to the hardware monitoring
1539 functions of the National Semiconductor PC87427 Super-I/O chip.
1540 The chip has two distinct logical devices, one for fan speed
1541 monitoring and control, and one for voltage and temperature
1542 monitoring. Fan speed monitoring and control are supported, as
1543 well as temperature monitoring. Voltages aren't supported yet.
1544
1545 This driver can also be built as a module. If so, the module
1546 will be called pc87427.
1547
1548config SENSORS_NTC_THERMISTOR
1549 tristate "NTC thermistor support"
1550 depends on IIO
1551 depends on THERMAL || !THERMAL_OF
1552 help
1553 This driver supports NTC thermistors sensor reading and its
1554 interpretation. The driver can also monitor the temperature and
1555 send notifications about the temperature.
1556
1557 Currently, this driver supports
1558 NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, NCP15WL333,
1559 NCP03WF104 and NCP15XH103 from Murata and B57330V2103 and
1560 B57891S0103 from EPCOS.
1561
1562 This driver can also be built as a module. If so, the module
1563 will be called ntc-thermistor.
1564
1565config SENSORS_NCT6683
1566 tristate "Nuvoton NCT6683D"
1567 depends on !PPC
1568 help
1569 If you say yes here you get support for the hardware monitoring
1570 functionality of the Nuvoton NCT6683D eSIO chip.
1571
1572 This driver can also be built as a module. If so, the module
1573 will be called nct6683.
1574
1575config SENSORS_NCT6775_CORE
1576 tristate
1577 select REGMAP
1578 help
1579 This module contains common code shared by the platform and
1580 i2c versions of the nct6775 driver; it is not useful on its
1581 own.
1582
1583 If built as a module, the module will be called
1584 nct6775-core.
1585
1586config SENSORS_NCT6775
1587 tristate "Platform driver for Nuvoton NCT6775F and compatibles"
1588 depends on !PPC
1589 depends on ACPI || ACPI=n
1590 select HWMON_VID
1591 select SENSORS_NCT6775_CORE
1592 help
1593 If you say yes here you get support for the hardware monitoring
1594 functionality of the Nuvoton NCT6106D, NCT6775F, NCT6776F, NCT6779D,
1595 NCT6791D, NCT6792D, NCT6793D, NCT6795D, NCT6796D, and compatible
1596 Super-I/O chips. This driver replaces the w83627ehf driver for
1597 NCT6775F and NCT6776F.
1598
1599 This driver can also be built as a module. If so, the module
1600 will be called nct6775.
1601
1602config SENSORS_NCT6775_I2C
1603 tristate "I2C driver for Nuvoton NCT6775F and compatibles"
1604 depends on I2C
1605 select REGMAP_I2C
1606 select SENSORS_NCT6775_CORE
1607 help
1608 If you say yes here you get support for the hardware monitoring
1609 functionality of the Nuvoton NCT6106D, NCT6775F, NCT6776F, NCT6779D,
1610 NCT6791D, NCT6792D, NCT6793D, NCT6795D, NCT6796D, and compatible
1611 Super-I/O chips via their I2C interface.
1612
1613 If you're not building a kernel for a BMC, this is probably
1614 not the driver you want (see CONFIG_SENSORS_NCT6775).
1615
1616 This driver can also be built as a module. If so, the module
1617 will be called nct6775-i2c.
1618
1619config SENSORS_NCT7802
1620 tristate "Nuvoton NCT7802Y"
1621 depends on I2C
1622 select REGMAP_I2C
1623 help
1624 If you say yes here you get support for the Nuvoton NCT7802Y
1625 hardware monitoring chip.
1626
1627 This driver can also be built as a module. If so, the module
1628 will be called nct7802.
1629
1630config SENSORS_NCT7904
1631 tristate "Nuvoton NCT7904"
1632 depends on I2C && WATCHDOG
1633 select WATCHDOG_CORE
1634 help
1635 If you say yes here you get support for the Nuvoton NCT7904
1636 hardware monitoring chip, including manual fan speed control
1637 and support for the integrated watchdog.
1638
1639 This driver can also be built as a module. If so, the module
1640 will be called nct7904.
1641
1642config SENSORS_NPCM7XX
1643 tristate "Nuvoton NPCM750 and compatible PWM and Fan controllers"
1644 imply THERMAL
1645 help
1646 This driver provides support for Nuvoton NPCM750/730/715/705 PWM
1647 and Fan controllers.
1648
1649 This driver can also be built as a module. If so, the module
1650 will be called npcm750-pwm-fan.
1651
1652config SENSORS_NSA320
1653 tristate "ZyXEL NSA320 and compatible fan speed and temperature sensors"
1654 depends on GPIOLIB && OF
1655 depends on MACH_KIRKWOOD || COMPILE_TEST
1656 help
1657 If you say yes here you get support for hardware monitoring
1658 for the ZyXEL NSA320 Media Server and other compatible devices
1659 (probably the NSA325 and some NSA310 variants).
1660
1661 The sensor data is taken from a Holtek HT46R065 microcontroller
1662 connected to GPIO lines.
1663
1664 This driver can also be built as a module. If so, the module
1665 will be called nsa320-hwmon.
1666
1667config SENSORS_NZXT_KRAKEN2
1668 tristate "NZXT Kraken X42/X51/X62/X72 liquid coolers"
1669 depends on USB_HID
1670 help
1671 If you say yes here you get support for hardware monitoring for the
1672 NZXT Kraken X42/X52/X62/X72 all-in-one CPU liquid coolers.
1673
1674 This driver can also be built as a module. If so, the module
1675 will be called nzxt-kraken2.
1676
1677config SENSORS_NZXT_SMART2
1678 tristate "NZXT RGB & Fan Controller/Smart Device v2"
1679 depends on USB_HID
1680 help
1681 If you say yes here you get support for hardware monitoring for the
1682 NZXT RGB & Fan Controller/Smart Device v2.
1683
1684 This driver can also be built as a module. If so, the module
1685 will be called nzxt-smart2.
1686
1687source "drivers/hwmon/occ/Kconfig"
1688
1689config SENSORS_OXP
1690 tristate "OneXPlayer EC fan control"
1691 depends on ACPI
1692 depends on X86
1693 help
1694 If you say yes here you get support for fan readings and control over
1695 OneXPlayer handheld devices. Only OneXPlayer mini AMD handheld variant
1696 boards are supported.
1697
1698 Can also be built as a module. In that case it will be called oxp-sensors.
1699
1700config SENSORS_PCF8591
1701 tristate "Philips PCF8591 ADC/DAC"
1702 depends on I2C
1703 help
1704 If you say yes here you get support for Philips PCF8591 4-channel
1705 ADC, 1-channel DAC chips.
1706
1707 This driver can also be built as a module. If so, the module
1708 will be called pcf8591.
1709
1710 These devices are hard to detect and rarely found on mainstream
1711 hardware. If unsure, say N.
1712
1713source "drivers/hwmon/peci/Kconfig"
1714
1715source "drivers/hwmon/pmbus/Kconfig"
1716
1717config SENSORS_PWM_FAN
1718 tristate "PWM fan"
1719 depends on (PWM && OF) || COMPILE_TEST
1720 depends on THERMAL || THERMAL=n
1721 help
1722 If you say yes here you get support for fans connected to PWM lines.
1723 The driver uses the generic PWM interface, thus it will work on a
1724 variety of SoCs.
1725
1726 This driver can also be built as a module. If so, the module
1727 will be called pwm-fan.
1728
1729config SENSORS_RASPBERRYPI_HWMON
1730 tristate "Raspberry Pi voltage monitor"
1731 depends on RASPBERRYPI_FIRMWARE || (COMPILE_TEST && !RASPBERRYPI_FIRMWARE)
1732 help
1733 If you say yes here you get support for voltage sensor on the
1734 Raspberry Pi.
1735
1736 This driver can also be built as a module. If so, the module
1737 will be called raspberrypi-hwmon.
1738
1739config SENSORS_SL28CPLD
1740 tristate "Kontron sl28cpld hardware monitoring driver"
1741 depends on MFD_SL28CPLD || COMPILE_TEST
1742 help
1743 If you say yes here you get support for the fan supervisor of the
1744 sl28cpld board management controller.
1745
1746 This driver can also be built as a module. If so, the module
1747 will be called sl28cpld-hwmon.
1748
1749config SENSORS_SBTSI
1750 tristate "Emulated SB-TSI temperature sensor"
1751 depends on I2C
1752 help
1753 If you say yes here you get support for emulated temperature
1754 sensors on AMD SoCs with SB-TSI interface connected to a BMC device.
1755
1756 This driver can also be built as a module. If so, the module will
1757 be called sbtsi_temp.
1758
1759config SENSORS_SBRMI
1760 tristate "Emulated SB-RMI sensor"
1761 depends on I2C
1762 help
1763 If you say yes here you get support for emulated RMI
1764 sensors on AMD SoCs with APML interface connected to a BMC device.
1765
1766 This driver can also be built as a module. If so, the module will
1767 be called sbrmi.
1768
1769config SENSORS_SHT15
1770 tristate "Sensiron humidity and temperature sensors. SHT15 and compat."
1771 depends on GPIOLIB || COMPILE_TEST
1772 select BITREVERSE
1773 help
1774 If you say yes here you get support for the Sensiron SHT10, SHT11,
1775 SHT15, SHT71, SHT75 humidity and temperature sensors.
1776
1777 This driver can also be built as a module. If so, the module
1778 will be called sht15.
1779
1780config SENSORS_SHT21
1781 tristate "Sensiron humidity and temperature sensors. SHT21 and compat."
1782 depends on I2C
1783 help
1784 If you say yes here you get support for the Sensiron SHT21, SHT25
1785 humidity and temperature sensors.
1786
1787 This driver can also be built as a module. If so, the module
1788 will be called sht21.
1789
1790config SENSORS_SHT3x
1791 tristate "Sensiron humidity and temperature sensors. SHT3x and compat."
1792 depends on I2C
1793 select CRC8
1794 help
1795 If you say yes here you get support for the Sensiron SHT30 and SHT31
1796 humidity and temperature sensors.
1797
1798 This driver can also be built as a module. If so, the module
1799 will be called sht3x.
1800
1801config SENSORS_SHT4x
1802 tristate "Sensiron humidity and temperature sensors. SHT4x and compat."
1803 depends on I2C
1804 select CRC8
1805 help
1806 If you say yes here you get support for the Sensiron SHT40, SHT41 and
1807 SHT45 humidity and temperature sensors.
1808
1809 This driver can also be built as a module. If so, the module
1810 will be called sht4x.
1811
1812config SENSORS_SHTC1
1813 tristate "Sensiron humidity and temperature sensors. SHTC1 and compat."
1814 depends on I2C
1815 help
1816 If you say yes here you get support for the Sensiron SHTC1, SHTW1,
1817 and SHTC3 humidity and temperature sensors.
1818
1819 This driver can also be built as a module. If so, the module
1820 will be called shtc1.
1821
1822config SENSORS_SIS5595
1823 tristate "Silicon Integrated Systems Corp. SiS5595"
1824 depends on PCI
1825 help
1826 If you say yes here you get support for the integrated sensors in
1827 SiS5595 South Bridges.
1828
1829 This driver can also be built as a module. If so, the module
1830 will be called sis5595.
1831
1832config SENSORS_SY7636A
1833 tristate "Silergy SY7636A"
1834 depends on MFD_SY7636A
1835 help
1836 If you say yes here you get support for the thermistor readout of
1837 the Silergy SY7636A PMIC.
1838
1839 This driver can also be built as a module. If so, the module
1840 will be called sy7636a-hwmon.
1841
1842config SENSORS_DME1737
1843 tristate "SMSC DME1737, SCH311x and compatibles"
1844 depends on I2C && !PPC
1845 select HWMON_VID
1846 help
1847 If you say yes here you get support for the hardware monitoring
1848 and fan control features of the SMSC DME1737, SCH311x, SCH5027, and
1849 Asus A8000 Super-I/O chips.
1850
1851 This driver can also be built as a module. If so, the module
1852 will be called dme1737.
1853
1854config SENSORS_EMC1403
1855 tristate "SMSC EMC1403/23 thermal sensor"
1856 depends on I2C
1857 select REGMAP_I2C
1858 help
1859 If you say yes here you get support for the SMSC EMC1403/23
1860 temperature monitoring chip.
1861
1862 Threshold values can be configured using sysfs.
1863 Data from the different diodes are accessible via sysfs.
1864
1865config SENSORS_EMC2103
1866 tristate "SMSC EMC2103"
1867 depends on I2C
1868 help
1869 If you say yes here you get support for the temperature
1870 and fan sensors of the SMSC EMC2103 chips.
1871
1872 This driver can also be built as a module. If so, the module
1873 will be called emc2103.
1874
1875config SENSORS_EMC2305
1876 tristate "Microchip EMC2305 and compatible EMC2301/2/3"
1877 depends on I2C
1878 imply THERMAL
1879 help
1880 If you say yes here you get support for the Microchip EMC2305
1881 fan controller chips.
1882 The Microchip EMC2305 is a fan controller for up to 5 fans.
1883 Fan rotation speeds are reported in RPM.
1884
1885 This driver can also be built as a module. If so, the module
1886 will be called emc2305.
1887
1888config SENSORS_EMC6W201
1889 tristate "SMSC EMC6W201"
1890 depends on I2C
1891 help
1892 If you say yes here you get support for the SMSC EMC6W201
1893 hardware monitoring chip.
1894
1895 This driver can also be built as a module. If so, the module
1896 will be called emc6w201.
1897
1898config SENSORS_SMSC47M1
1899 tristate "SMSC LPC47M10x and compatibles"
1900 depends on !PPC
1901 help
1902 If you say yes here you get support for the integrated fan
1903 monitoring and control capabilities of the SMSC LPC47B27x,
1904 LPC47M10x, LPC47M112, LPC47M13x, LPC47M14x, LPC47M15x,
1905 LPC47M192, LPC47M292 and LPC47M997 chips.
1906
1907 The temperature and voltage sensor features of the LPC47M15x,
1908 LPC47M192, LPC47M292 and LPC47M997 are supported by another
1909 driver, select also "SMSC LPC47M192 and compatibles" below for
1910 those.
1911
1912 This driver can also be built as a module. If so, the module
1913 will be called smsc47m1.
1914
1915config SENSORS_SMSC47M192
1916 tristate "SMSC LPC47M192 and compatibles"
1917 depends on I2C
1918 select HWMON_VID
1919 help
1920 If you say yes here you get support for the temperature and
1921 voltage sensors of the SMSC LPC47M192, LPC47M15x, LPC47M292
1922 and LPC47M997 chips.
1923
1924 The fan monitoring and control capabilities of these chips
1925 are supported by another driver, select
1926 "SMSC LPC47M10x and compatibles" above. You need both drivers
1927 if you want fan control and voltage/temperature sensor support.
1928
1929 This driver can also be built as a module. If so, the module
1930 will be called smsc47m192.
1931
1932config SENSORS_SMSC47B397
1933 tristate "SMSC LPC47B397-NC"
1934 depends on !PPC
1935 help
1936 If you say yes here you get support for the SMSC LPC47B397-NC
1937 sensor chip.
1938
1939 This driver can also be built as a module. If so, the module
1940 will be called smsc47b397.
1941
1942config SENSORS_SCH56XX_COMMON
1943 tristate
1944 select REGMAP
1945
1946config SENSORS_SCH5627
1947 tristate "SMSC SCH5627"
1948 depends on !PPC && WATCHDOG
1949 select SENSORS_SCH56XX_COMMON
1950 select WATCHDOG_CORE
1951 help
1952 If you say yes here you get support for the hardware monitoring
1953 features of the SMSC SCH5627 Super-I/O chip including support for
1954 the integrated watchdog.
1955
1956 This driver can also be built as a module. If so, the module
1957 will be called sch5627.
1958
1959config SENSORS_SCH5636
1960 tristate "SMSC SCH5636"
1961 depends on !PPC && WATCHDOG
1962 select SENSORS_SCH56XX_COMMON
1963 select WATCHDOG_CORE
1964 help
1965 SMSC SCH5636 Super I/O chips include an embedded microcontroller for
1966 hardware monitoring solutions, allowing motherboard manufacturers to
1967 create their own custom hwmon solution based upon the SCH5636.
1968
1969 Currently this driver only supports the Fujitsu Theseus SCH5636 based
1970 hwmon solution. Say yes here if you want support for the Fujitsu
1971 Theseus' hardware monitoring features including support for the
1972 integrated watchdog.
1973
1974 This driver can also be built as a module. If so, the module
1975 will be called sch5636.
1976
1977config SENSORS_STTS751
1978 tristate "ST Microelectronics STTS751"
1979 depends on I2C
1980 help
1981 If you say yes here you get support for STTS751
1982 temperature sensor chips.
1983
1984 This driver can also be built as a module. If so, the module
1985 will be called stts751.
1986
1987config SENSORS_SFCTEMP
1988 tristate "Starfive JH71x0 temperature sensor"
1989 depends on ARCH_STARFIVE || COMPILE_TEST
1990 help
1991 If you say yes here you get support for temperature sensor
1992 on the Starfive JH71x0 SoCs.
1993
1994 This driver can also be built as a module. If so, the module
1995 will be called sfctemp.
1996
1997config SENSORS_ADC128D818
1998 tristate "Texas Instruments ADC128D818"
1999 depends on I2C
2000 help
2001 If you say yes here you get support for the Texas Instruments
2002 ADC128D818 System Monitor with Temperature Sensor chip.
2003
2004 This driver can also be built as a module. If so, the module
2005 will be called adc128d818.
2006
2007config SENSORS_ADS7828
2008 tristate "Texas Instruments ADS7828 and compatibles"
2009 depends on I2C
2010 select REGMAP_I2C
2011 help
2012 If you say yes here you get support for Texas Instruments ADS7828 and
2013 ADS7830 8-channel A/D converters. ADS7828 resolution is 12-bit, while
2014 it is 8-bit on ADS7830.
2015
2016 This driver can also be built as a module. If so, the module
2017 will be called ads7828.
2018
2019config SENSORS_ADS7871
2020 tristate "Texas Instruments ADS7871 A/D converter"
2021 depends on SPI
2022 help
2023 If you say yes here you get support for TI ADS7871 & ADS7870
2024
2025 This driver can also be built as a module. If so, the module
2026 will be called ads7871.
2027
2028config SENSORS_AMC6821
2029 tristate "Texas Instruments AMC6821"
2030 depends on I2C
2031 help
2032 If you say yes here you get support for the Texas Instruments
2033 AMC6821 hardware monitoring chips.
2034
2035 This driver can also be built as a module. If so, the module
2036 will be called amc6821.
2037
2038config SENSORS_INA209
2039 tristate "TI / Burr Brown INA209"
2040 depends on I2C
2041 help
2042 If you say yes here you get support for the TI / Burr Brown INA209
2043 voltage / current / power monitor I2C interface.
2044
2045 This driver can also be built as a module. If so, the module will
2046 be called ina209.
2047
2048config SENSORS_INA2XX
2049 tristate "Texas Instruments INA219 and compatibles"
2050 depends on I2C
2051 select REGMAP_I2C
2052 help
2053 If you say yes here you get support for INA219, INA220, INA226,
2054 INA230, and INA231 power monitor chips.
2055
2056 The INA2xx driver is configured for the default configuration of
2057 the part as described in the datasheet.
2058 Default value for Rshunt is 10 mOhms.
2059 This driver can also be built as a module. If so, the module
2060 will be called ina2xx.
2061
2062config SENSORS_INA238
2063 tristate "Texas Instruments INA238"
2064 depends on I2C
2065 select REGMAP_I2C
2066 help
2067 If you say yes here you get support for the INA238 power monitor
2068 chip. This driver supports voltage, current, power and temperature
2069 measurements as well as alarm configuration.
2070
2071 This driver can also be built as a module. If so, the module
2072 will be called ina238.
2073
2074config SENSORS_INA3221
2075 tristate "Texas Instruments INA3221 Triple Power Monitor"
2076 depends on I2C
2077 select REGMAP_I2C
2078 help
2079 If you say yes here you get support for the TI INA3221 Triple Power
2080 Monitor.
2081
2082 This driver can also be built as a module. If so, the module
2083 will be called ina3221.
2084
2085config SENSORS_TC74
2086 tristate "Microchip TC74"
2087 depends on I2C
2088 help
2089 If you say yes here you get support for Microchip TC74 single
2090 input temperature sensor chips.
2091
2092 This driver can also be built as a module. If so, the module
2093 will be called tc74.
2094
2095config SENSORS_THMC50
2096 tristate "Texas Instruments THMC50 / Analog Devices ADM1022"
2097 depends on I2C
2098 help
2099 If you say yes here you get support for Texas Instruments THMC50
2100 sensor chips and clones: the Analog Devices ADM1022.
2101
2102 This driver can also be built as a module. If so, the module
2103 will be called thmc50.
2104
2105config SENSORS_TMP102
2106 tristate "Texas Instruments TMP102"
2107 depends on I2C
2108 select REGMAP_I2C
2109 help
2110 If you say yes here you get support for Texas Instruments TMP102
2111 sensor chips.
2112
2113 This driver can also be built as a module. If so, the module
2114 will be called tmp102.
2115
2116config SENSORS_TMP103
2117 tristate "Texas Instruments TMP103"
2118 depends on I2C
2119 select REGMAP_I2C
2120 help
2121 If you say yes here you get support for Texas Instruments TMP103
2122 sensor chips.
2123
2124 This driver can also be built as a module. If so, the module
2125 will be called tmp103.
2126
2127config SENSORS_TMP108
2128 tristate "Texas Instruments TMP108"
2129 depends on I2C
2130 select REGMAP_I2C
2131 help
2132 If you say yes here you get support for Texas Instruments TMP108
2133 sensor chips.
2134
2135 This driver can also be built as a module. If so, the module
2136 will be called tmp108.
2137
2138config SENSORS_TMP401
2139 tristate "Texas Instruments TMP401 and compatibles"
2140 depends on I2C
2141 select REGMAP
2142 help
2143 If you say yes here you get support for Texas Instruments TMP401,
2144 TMP411, TMP431, TMP432, and TMP435 temperature sensor chips.
2145
2146 This driver can also be built as a module. If so, the module
2147 will be called tmp401.
2148
2149config SENSORS_TMP421
2150 tristate "Texas Instruments TMP421 and compatible"
2151 depends on I2C
2152 help
2153 If you say yes here you get support for Texas Instruments TMP421,
2154 TMP422, TMP423, TMP441, and TMP442 temperature sensor chips.
2155
2156 This driver can also be built as a module. If so, the module
2157 will be called tmp421.
2158
2159config SENSORS_TMP464
2160 tristate "Texas Instruments TMP464 and compatible"
2161 depends on I2C
2162 select REGMAP_I2C
2163 help
2164 If you say yes here you get support for Texas Instruments TMP464
2165 and TMP468 temperature sensor chips.
2166
2167 This driver can also be built as a module. If so, the module
2168 will be called tmp464.
2169
2170config SENSORS_TMP513
2171 tristate "Texas Instruments TMP513 and compatibles"
2172 depends on I2C
2173 help
2174 If you say yes here you get support for Texas Instruments TMP512,
2175 and TMP513 temperature and power supply sensor chips.
2176
2177 This driver can also be built as a module. If so, the module
2178 will be called tmp513.
2179
2180config SENSORS_VEXPRESS
2181 tristate "Versatile Express"
2182 depends on VEXPRESS_CONFIG
2183 help
2184 This driver provides support for hardware sensors available on
2185 the ARM Ltd's Versatile Express platform. It can provide wide
2186 range of information like temperature, power, energy.
2187
2188config SENSORS_VIA_CPUTEMP
2189 tristate "VIA CPU temperature sensor"
2190 depends on X86
2191 select HWMON_VID
2192 help
2193 If you say yes here you get support for the temperature
2194 sensor inside your CPU. Supported are all known variants of
2195 the VIA C7 and Nano.
2196
2197config SENSORS_VIA686A
2198 tristate "VIA686A"
2199 depends on PCI
2200 help
2201 If you say yes here you get support for the integrated sensors in
2202 Via 686A/B South Bridges.
2203
2204 This driver can also be built as a module. If so, the module
2205 will be called via686a.
2206
2207config SENSORS_VT1211
2208 tristate "VIA VT1211"
2209 depends on !PPC
2210 select HWMON_VID
2211 help
2212 If you say yes here then you get support for hardware monitoring
2213 features of the VIA VT1211 Super-I/O chip.
2214
2215 This driver can also be built as a module. If so, the module
2216 will be called vt1211.
2217
2218config SENSORS_VT8231
2219 tristate "VIA VT8231"
2220 depends on PCI
2221 select HWMON_VID
2222 help
2223 If you say yes here then you get support for the integrated sensors
2224 in the VIA VT8231 device.
2225
2226 This driver can also be built as a module. If so, the module
2227 will be called vt8231.
2228
2229config SENSORS_W83773G
2230 tristate "Nuvoton W83773G"
2231 depends on I2C
2232 select REGMAP_I2C
2233 help
2234 If you say yes here you get support for the Nuvoton W83773G hardware
2235 monitoring chip.
2236
2237 This driver can also be built as a module. If so, the module
2238 will be called w83773g.
2239
2240config SENSORS_W83781D
2241 tristate "Winbond W83781D, W83782D, W83783S, Asus AS99127F"
2242 depends on I2C
2243 select HWMON_VID
2244 help
2245 If you say yes here you get support for the Winbond W8378x series
2246 of sensor chips: the W83781D, W83782D and W83783S, and the similar
2247 Asus AS99127F.
2248
2249 This driver can also be built as a module. If so, the module
2250 will be called w83781d.
2251
2252config SENSORS_W83791D
2253 tristate "Winbond W83791D"
2254 depends on I2C
2255 select HWMON_VID
2256 help
2257 If you say yes here you get support for the Winbond W83791D chip.
2258
2259 This driver can also be built as a module. If so, the module
2260 will be called w83791d.
2261
2262config SENSORS_W83792D
2263 tristate "Winbond W83792D"
2264 depends on I2C
2265 help
2266 If you say yes here you get support for the Winbond W83792D chip.
2267
2268 This driver can also be built as a module. If so, the module
2269 will be called w83792d.
2270
2271config SENSORS_W83793
2272 tristate "Winbond W83793"
2273 depends on I2C
2274 select HWMON_VID
2275 help
2276 If you say yes here you get support for the Winbond W83793
2277 hardware monitoring chip, including support for the integrated
2278 watchdog.
2279
2280 This driver can also be built as a module. If so, the module
2281 will be called w83793.
2282
2283config SENSORS_W83795
2284 tristate "Winbond/Nuvoton W83795G/ADG"
2285 depends on I2C
2286 help
2287 If you say yes here you get support for the Winbond W83795G and
2288 W83795ADG hardware monitoring chip, including manual fan speed
2289 control.
2290
2291 This driver can also be built as a module. If so, the module
2292 will be called w83795.
2293
2294config SENSORS_W83795_FANCTRL
2295 bool "Include automatic fan control support"
2296 depends on SENSORS_W83795
2297 help
2298 If you say yes here, support for automatic fan speed control
2299 will be included in the driver.
2300
2301 Please also note that this option will create sysfs attribute
2302 files which may change in the future, so you shouldn't rely
2303 on them being stable.
2304
2305config SENSORS_W83L785TS
2306 tristate "Winbond W83L785TS-S"
2307 depends on I2C
2308 help
2309 If you say yes here you get support for the Winbond W83L785TS-S
2310 sensor chip, which is used on the Asus A7N8X, among other
2311 motherboards.
2312
2313 This driver can also be built as a module. If so, the module
2314 will be called w83l785ts.
2315
2316config SENSORS_W83L786NG
2317 tristate "Winbond W83L786NG, W83L786NR"
2318 depends on I2C
2319 help
2320 If you say yes here you get support for the Winbond W83L786NG
2321 and W83L786NR sensor chips.
2322
2323 This driver can also be built as a module. If so, the module
2324 will be called w83l786ng.
2325
2326config SENSORS_W83627HF
2327 tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF"
2328 depends on !PPC
2329 select HWMON_VID
2330 help
2331 If you say yes here you get support for the Winbond W836X7 series
2332 of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and
2333 W83697HF.
2334
2335 This driver can also be built as a module. If so, the module
2336 will be called w83627hf.
2337
2338config SENSORS_W83627EHF
2339 tristate "Winbond W83627EHF/EHG/DHG/UHG, W83667HG"
2340 depends on !PPC
2341 select HWMON_VID
2342 help
2343 If you say yes here you get support for the hardware
2344 monitoring functionality of the Winbond W83627EHF Super-I/O chip.
2345
2346 This driver also supports the W83627EHG, which is the lead-free
2347 version of the W83627EHF, and the W83627DHG, which is a similar
2348 chip suited for specific Intel processors that use PECI such as
2349 the Core 2 Duo. And also the W83627UHG, which is a stripped down
2350 version of the W83627DHG (as far as hardware monitoring goes.)
2351
2352 This driver also supports Nuvoton W83667HG and W83667HG-B.
2353
2354 This driver can also be built as a module. If so, the module
2355 will be called w83627ehf.
2356
2357config SENSORS_WM831X
2358 tristate "WM831x PMICs"
2359 depends on MFD_WM831X
2360 help
2361 If you say yes here you get support for the hardware
2362 monitoring functionality of the Wolfson Microelectronics
2363 WM831x series of PMICs.
2364
2365 This driver can also be built as a module. If so, the module
2366 will be called wm831x-hwmon.
2367
2368config SENSORS_WM8350
2369 tristate "Wolfson Microelectronics WM835x"
2370 depends on MFD_WM8350
2371 help
2372 If you say yes here you get support for the hardware
2373 monitoring features of the WM835x series of PMICs.
2374
2375 This driver can also be built as a module. If so, the module
2376 will be called wm8350-hwmon.
2377
2378config SENSORS_ULTRA45
2379 tristate "Sun Ultra45 PIC16F747"
2380 depends on SPARC64
2381 help
2382 This driver provides support for the Ultra45 workstation environmental
2383 sensors.
2384
2385config SENSORS_XGENE
2386 tristate "APM X-Gene SoC hardware monitoring driver"
2387 depends on XGENE_SLIMPRO_MBOX || PCC
2388 help
2389 If you say yes here you get support for the temperature
2390 and power sensors for APM X-Gene SoC.
2391
2392config SENSORS_INTEL_M10_BMC_HWMON
2393 tristate "Intel MAX10 BMC Hardware Monitoring"
2394 depends on MFD_INTEL_M10_BMC_CORE
2395 help
2396 This driver provides support for the hardware monitoring functionality
2397 on Intel MAX10 BMC chip.
2398
2399 This BMC Chip is used on Intel FPGA PCIe Acceleration Cards (PAC). Its
2400 sensors monitor various telemetry data of different components on the
2401 card, e.g. board temperature, FPGA core temperature/voltage/current.
2402
2403if ACPI
2404
2405comment "ACPI drivers"
2406
2407config SENSORS_ACPI_POWER
2408 tristate "ACPI 4.0 power meter"
2409 help
2410 This driver exposes ACPI 4.0 power meters as hardware monitoring
2411 devices. Say Y (or M) if you have a computer with ACPI 4.0 firmware
2412 and a power meter.
2413
2414 To compile this driver as a module, choose M here:
2415 the module will be called acpi_power_meter.
2416
2417config SENSORS_ATK0110
2418 tristate "ASUS ATK0110"
2419 depends on X86
2420 help
2421 If you say yes here you get support for the ACPI hardware
2422 monitoring interface found in many ASUS motherboards. This
2423 driver will provide readings of fans, voltages and temperatures
2424 through the system firmware.
2425
2426 This driver can also be built as a module. If so, the module
2427 will be called asus_atk0110.
2428
2429config SENSORS_ASUS_WMI
2430 tristate "ASUS WMI X370/X470/B450/X399"
2431 depends on ACPI_WMI
2432 help
2433 If you say yes here you get support for the ACPI hardware monitoring
2434 interface found in X370/X470/B450/X399 ASUS motherboards. This driver
2435 will provide readings of fans, voltages and temperatures through the system
2436 firmware.
2437
2438 This driver can also be built as a module. If so, the module
2439 will be called asus_wmi_sensors.
2440
2441config SENSORS_ASUS_EC
2442 tristate "ASUS EC Sensors"
2443 depends on X86
2444 help
2445 If you say yes here you get support for the ACPI embedded controller
2446 hardware monitoring interface found in ASUS motherboards. The driver
2447 currently supports B550/X570 boards, although other ASUS boards might
2448 provide this monitoring interface as well.
2449
2450 This driver can also be built as a module. If so, the module
2451 will be called asus_ec_sensors.
2452
2453config SENSORS_HP_WMI
2454 tristate "HP WMI Sensors"
2455 depends on ACPI_WMI
2456 help
2457 If you say yes here you get support for the ACPI hardware monitoring
2458 interface found in HP (and some HP Compaq) business-class computers.
2459 Available sensors vary between systems. Temperature and fan speed
2460 sensors are the most common.
2461
2462 This driver can also be built as a module. If so, the module
2463 will be called hp_wmi_sensors.
2464
2465endif # ACPI
2466
2467endif # HWMON
1#
2# Hardware monitoring chip drivers configuration
3#
4
5menuconfig HWMON
6 tristate "Hardware Monitoring support"
7 depends on HAS_IOMEM
8 default y
9 help
10 Hardware monitoring devices let you monitor the hardware health
11 of a system. Most modern motherboards include such a device. It
12 can include temperature sensors, voltage sensors, fan speed
13 sensors and various additional features such as the ability to
14 control the speed of the fans. If you want this support you
15 should say Y here and also to the specific driver(s) for your
16 sensors chip(s) below.
17
18 To find out which specific driver(s) you need, use the
19 sensors-detect script from the lm_sensors package. Read
20 <file:Documentation/hwmon/userspace-tools> for details.
21
22 This support can also be built as a module. If so, the module
23 will be called hwmon.
24
25if HWMON
26
27config HWMON_VID
28 tristate
29 default n
30
31config HWMON_DEBUG_CHIP
32 bool "Hardware Monitoring Chip debugging messages"
33 default n
34 help
35 Say Y here if you want the I2C chip drivers to produce a bunch of
36 debug messages to the system log. Select this if you are having
37 a problem with I2C support and want to see more of what is going
38 on.
39
40comment "Native drivers"
41
42config SENSORS_AB8500
43 tristate "AB8500 thermal monitoring"
44 depends on AB8500_GPADC && AB8500_BM
45 default n
46 help
47 If you say yes here you get support for the thermal sensor part
48 of the AB8500 chip. The driver includes thermal management for
49 AB8500 die and two GPADC channels. The GPADC channel are preferably
50 used to access sensors outside the AB8500 chip.
51
52 This driver can also be built as a module. If so, the module
53 will be called abx500-temp.
54
55config SENSORS_ABITUGURU
56 tristate "Abit uGuru (rev 1 & 2)"
57 depends on X86 && DMI
58 help
59 If you say yes here you get support for the sensor part of the first
60 and second revision of the Abit uGuru chip. The voltage and frequency
61 control parts of the Abit uGuru are not supported. The Abit uGuru
62 chip can be found on Abit uGuru featuring motherboards (most modern
63 Abit motherboards from before end 2005). For more info and a list
64 of which motherboards have which revision see
65 Documentation/hwmon/abituguru
66
67 This driver can also be built as a module. If so, the module
68 will be called abituguru.
69
70config SENSORS_ABITUGURU3
71 tristate "Abit uGuru (rev 3)"
72 depends on X86 && DMI
73 help
74 If you say yes here you get support for the sensor part of the
75 third revision of the Abit uGuru chip. Only reading the sensors
76 and their settings is supported. The third revision of the Abit
77 uGuru chip can be found on recent Abit motherboards (since end
78 2005). For more info and a list of which motherboards have which
79 revision see Documentation/hwmon/abituguru3
80
81 This driver can also be built as a module. If so, the module
82 will be called abituguru3.
83
84config SENSORS_AD7314
85 tristate "Analog Devices AD7314 and compatibles"
86 depends on SPI
87 help
88 If you say yes here you get support for the Analog Devices
89 AD7314, ADT7301 and ADT7302 temperature sensors.
90
91 This driver can also be built as a module. If so, the module
92 will be called ad7314.
93
94config SENSORS_AD7414
95 tristate "Analog Devices AD7414"
96 depends on I2C
97 help
98 If you say yes here you get support for the Analog Devices
99 AD7414 temperature monitoring chip.
100
101 This driver can also be built as a module. If so, the module
102 will be called ad7414.
103
104config SENSORS_AD7418
105 tristate "Analog Devices AD7416, AD7417 and AD7418"
106 depends on I2C
107 help
108 If you say yes here you get support for the Analog Devices
109 AD7416, AD7417 and AD7418 temperature monitoring chips.
110
111 This driver can also be built as a module. If so, the module
112 will be called ad7418.
113
114config SENSORS_ADM1021
115 tristate "Analog Devices ADM1021 and compatibles"
116 depends on I2C
117 help
118 If you say yes here you get support for Analog Devices ADM1021
119 and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
120 Genesys Logic GL523SM, National Semiconductor LM84 and TI THMC10.
121
122 This driver can also be built as a module. If so, the module
123 will be called adm1021.
124
125config SENSORS_ADM1025
126 tristate "Analog Devices ADM1025 and compatibles"
127 depends on I2C
128 select HWMON_VID
129 help
130 If you say yes here you get support for Analog Devices ADM1025
131 and Philips NE1619 sensor chips.
132
133 This driver can also be built as a module. If so, the module
134 will be called adm1025.
135
136config SENSORS_ADM1026
137 tristate "Analog Devices ADM1026 and compatibles"
138 depends on I2C
139 select HWMON_VID
140 help
141 If you say yes here you get support for Analog Devices ADM1026
142 sensor chip.
143
144 This driver can also be built as a module. If so, the module
145 will be called adm1026.
146
147config SENSORS_ADM1029
148 tristate "Analog Devices ADM1029"
149 depends on I2C
150 help
151 If you say yes here you get support for Analog Devices ADM1029
152 sensor chip.
153 Very rare chip, please let us know you use it.
154
155 This driver can also be built as a module. If so, the module
156 will be called adm1029.
157
158config SENSORS_ADM1031
159 tristate "Analog Devices ADM1031 and compatibles"
160 depends on I2C
161 help
162 If you say yes here you get support for Analog Devices ADM1031
163 and ADM1030 sensor chips.
164
165 This driver can also be built as a module. If so, the module
166 will be called adm1031.
167
168config SENSORS_ADM9240
169 tristate "Analog Devices ADM9240 and compatibles"
170 depends on I2C
171 select HWMON_VID
172 help
173 If you say yes here you get support for Analog Devices ADM9240,
174 Dallas DS1780, National Semiconductor LM81 sensor chips.
175
176 This driver can also be built as a module. If so, the module
177 will be called adm9240.
178
179config SENSORS_ADT7X10
180 tristate
181 help
182 This module contains common code shared by the ADT7310/ADT7320 and
183 ADT7410/ADT7420 temperature monitoring chip drivers.
184
185 If build as a module, the module will be called adt7x10.
186
187config SENSORS_ADT7310
188 tristate "Analog Devices ADT7310/ADT7320"
189 depends on SPI_MASTER
190 select SENSORS_ADT7X10
191 help
192 If you say yes here you get support for the Analog Devices
193 ADT7310 and ADT7320 temperature monitoring chips.
194
195 This driver can also be built as a module. If so, the module
196 will be called adt7310.
197
198config SENSORS_ADT7410
199 tristate "Analog Devices ADT7410/ADT7420"
200 depends on I2C
201 select SENSORS_ADT7X10
202 help
203 If you say yes here you get support for the Analog Devices
204 ADT7410 and ADT7420 temperature monitoring chips.
205
206 This driver can also be built as a module. If so, the module
207 will be called adt7410.
208
209config SENSORS_ADT7411
210 tristate "Analog Devices ADT7411"
211 depends on I2C
212 help
213 If you say yes here you get support for the Analog Devices
214 ADT7411 voltage and temperature monitoring chip.
215
216 This driver can also be built as a module. If so, the module
217 will be called adt7411.
218
219config SENSORS_ADT7462
220 tristate "Analog Devices ADT7462"
221 depends on I2C
222 help
223 If you say yes here you get support for the Analog Devices
224 ADT7462 temperature monitoring chips.
225
226 This driver can also be built as a module. If so, the module
227 will be called adt7462.
228
229config SENSORS_ADT7470
230 tristate "Analog Devices ADT7470"
231 depends on I2C
232 help
233 If you say yes here you get support for the Analog Devices
234 ADT7470 temperature monitoring chips.
235
236 This driver can also be built as a module. If so, the module
237 will be called adt7470.
238
239config SENSORS_ADT7475
240 tristate "Analog Devices ADT7473, ADT7475, ADT7476 and ADT7490"
241 depends on I2C
242 select HWMON_VID
243 help
244 If you say yes here you get support for the Analog Devices
245 ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring
246 chips.
247
248 This driver can also be build as a module. If so, the module
249 will be called adt7475.
250
251config SENSORS_ASC7621
252 tristate "Andigilog aSC7621"
253 depends on I2C
254 help
255 If you say yes here you get support for the aSC7621
256 family of SMBus sensors chip found on most Intel X38, X48, X58,
257 945, 965 and 975 desktop boards. Currently supported chips:
258 aSC7621
259 aSC7621a
260
261 This driver can also be built as a module. If so, the module
262 will be called asc7621.
263
264config SENSORS_K8TEMP
265 tristate "AMD Athlon64/FX or Opteron temperature sensor"
266 depends on X86 && PCI
267 help
268 If you say yes here you get support for the temperature
269 sensor(s) inside your CPU. Supported is whole AMD K8
270 microarchitecture. Please note that you will need at least
271 lm-sensors 2.10.1 for proper userspace support.
272
273 This driver can also be built as a module. If so, the module
274 will be called k8temp.
275
276config SENSORS_K10TEMP
277 tristate "AMD Family 10h+ temperature sensor"
278 depends on X86 && PCI
279 help
280 If you say yes here you get support for the temperature
281 sensor(s) inside your CPU. Supported are later revisions of
282 the AMD Family 10h and all revisions of the AMD Family 11h,
283 12h (Llano), 14h (Brazos), 15h (Bulldozer/Trinity/Kaveri) and
284 16h (Kabini/Mullins) microarchitectures.
285
286 This driver can also be built as a module. If so, the module
287 will be called k10temp.
288
289config SENSORS_FAM15H_POWER
290 tristate "AMD Family 15h processor power"
291 depends on X86 && PCI
292 help
293 If you say yes here you get support for processor power
294 information of your AMD family 15h CPU.
295
296 This driver can also be built as a module. If so, the module
297 will be called fam15h_power.
298
299config SENSORS_APPLESMC
300 tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)"
301 depends on INPUT && X86
302 select NEW_LEDS
303 select LEDS_CLASS
304 select INPUT_POLLDEV
305 default n
306 help
307 This driver provides support for the Apple System Management
308 Controller, which provides an accelerometer (Apple Sudden Motion
309 Sensor), light sensors, temperature sensors, keyboard backlight
310 control and fan control.
311
312 Only Intel-based Apple's computers are supported (MacBook Pro,
313 MacBook, MacMini).
314
315 Data from the different sensors, keyboard backlight control and fan
316 control are accessible via sysfs.
317
318 This driver also provides an absolute input class device, allowing
319 the laptop to act as a pinball machine-esque joystick.
320
321 Say Y here if you have an applicable laptop and want to experience
322 the awesome power of applesmc.
323
324config SENSORS_ASB100
325 tristate "Asus ASB100 Bach"
326 depends on X86 && I2C
327 select HWMON_VID
328 help
329 If you say yes here you get support for the ASB100 Bach sensor
330 chip found on some Asus mainboards.
331
332 This driver can also be built as a module. If so, the module
333 will be called asb100.
334
335config SENSORS_ATXP1
336 tristate "Attansic ATXP1 VID controller"
337 depends on I2C
338 select HWMON_VID
339 help
340 If you say yes here you get support for the Attansic ATXP1 VID
341 controller.
342
343 If your board have such a chip, you are able to control your CPU
344 core and other voltages.
345
346 This driver can also be built as a module. If so, the module
347 will be called atxp1.
348
349config SENSORS_DS620
350 tristate "Dallas Semiconductor DS620"
351 depends on I2C
352 help
353 If you say yes here you get support for Dallas Semiconductor
354 DS620 sensor chip.
355
356 This driver can also be built as a module. If so, the module
357 will be called ds620.
358
359config SENSORS_DS1621
360 tristate "Dallas Semiconductor DS1621 and compatibles"
361 depends on I2C
362 help
363 If you say yes here you get support for Dallas Semiconductor/Maxim
364 Integrated DS1621 sensor chips and compatible models including:
365
366 - Dallas Semiconductor DS1625
367 - Maxim Integrated DS1631
368 - Maxim Integrated DS1721
369 - Maxim Integrated DS1731
370
371 This driver can also be built as a module. If so, the module
372 will be called ds1621.
373
374config SENSORS_DA9052_ADC
375 tristate "Dialog DA9052/DA9053 ADC"
376 depends on PMIC_DA9052
377 help
378 Say y here to support the ADC found on Dialog Semiconductor
379 DA9052-BC and DA9053-AA/Bx PMICs.
380
381 This driver can also be built as module. If so, the module
382 will be called da9052-hwmon.
383
384config SENSORS_DA9055
385 tristate "Dialog Semiconductor DA9055 ADC"
386 depends on MFD_DA9055
387 help
388 If you say yes here you get support for ADC on the Dialog
389 Semiconductor DA9055 PMIC.
390
391 This driver can also be built as a module. If so, the module
392 will be called da9055-hwmon.
393
394config SENSORS_I5K_AMB
395 tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets"
396 depends on PCI
397 help
398 If you say yes here you get support for FB-DIMM AMB temperature
399 monitoring chips on systems with the Intel 5000 series chipset.
400
401 This driver can also be built as a module. If so, the module
402 will be called i5k_amb.
403
404config SENSORS_F71805F
405 tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG"
406 depends on !PPC
407 help
408 If you say yes here you get support for hardware monitoring
409 features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG
410 Super-I/O chips.
411
412 This driver can also be built as a module. If so, the module
413 will be called f71805f.
414
415config SENSORS_F71882FG
416 tristate "Fintek F71882FG and compatibles"
417 depends on !PPC
418 help
419 If you say yes here you get support for hardware monitoring
420 features of many Fintek Super-I/O (LPC) chips. The currently
421 supported chips are:
422 F71808E/A
423 F71858FG
424 F71862FG
425 F71863FG
426 F71869F/E/A
427 F71882FG
428 F71883FG
429 F71889FG/ED/A
430 F8000
431 F81801U
432 F81865F
433
434 This driver can also be built as a module. If so, the module
435 will be called f71882fg.
436
437config SENSORS_F75375S
438 tristate "Fintek F75375S/SP, F75373 and F75387"
439 depends on I2C
440 help
441 If you say yes here you get support for hardware monitoring
442 features of the Fintek F75375S/SP, F75373 and F75387
443
444 This driver can also be built as a module. If so, the module
445 will be called f75375s.
446
447config SENSORS_MC13783_ADC
448 tristate "Freescale MC13783/MC13892 ADC"
449 depends on MFD_MC13XXX
450 help
451 Support for the A/D converter on MC13783 and MC13892 PMIC.
452
453config SENSORS_FSCHMD
454 tristate "Fujitsu Siemens Computers sensor chips"
455 depends on X86 && I2C
456 help
457 If you say yes here you get support for the following Fujitsu
458 Siemens Computers (FSC) sensor chips: Poseidon, Scylla, Hermes,
459 Heimdall, Heracles, Hades and Syleus including support for the
460 integrated watchdog.
461
462 This is a merged driver for FSC sensor chips replacing the fscpos,
463 fscscy and fscher drivers and adding support for several other FSC
464 sensor chips.
465
466 This driver can also be built as a module. If so, the module
467 will be called fschmd.
468
469config SENSORS_GL518SM
470 tristate "Genesys Logic GL518SM"
471 depends on I2C
472 help
473 If you say yes here you get support for Genesys Logic GL518SM
474 sensor chips.
475
476 This driver can also be built as a module. If so, the module
477 will be called gl518sm.
478
479config SENSORS_GL520SM
480 tristate "Genesys Logic GL520SM"
481 depends on I2C
482 select HWMON_VID
483 help
484 If you say yes here you get support for Genesys Logic GL520SM
485 sensor chips.
486
487 This driver can also be built as a module. If so, the module
488 will be called gl520sm.
489
490config SENSORS_G760A
491 tristate "GMT G760A"
492 depends on I2C
493 help
494 If you say yes here you get support for Global Mixed-mode
495 Technology Inc G760A fan speed PWM controller chips.
496
497 This driver can also be built as a module. If so, the module
498 will be called g760a.
499
500config SENSORS_G762
501 tristate "GMT G762 and G763"
502 depends on I2C
503 help
504 If you say yes here you get support for Global Mixed-mode
505 Technology Inc G762 and G763 fan speed PWM controller chips.
506
507 This driver can also be built as a module. If so, the module
508 will be called g762.
509
510config SENSORS_GPIO_FAN
511 tristate "GPIO fan"
512 depends on GPIOLIB
513 help
514 If you say yes here you get support for fans connected to GPIO lines.
515
516 This driver can also be built as a module. If so, the module
517 will be called gpio-fan.
518
519config SENSORS_HIH6130
520 tristate "Honeywell Humidicon HIH-6130 humidity/temperature sensor"
521 depends on I2C
522 help
523 If you say yes here you get support for Honeywell Humidicon
524 HIH-6130 and HIH-6131 Humidicon humidity sensors.
525
526 This driver can also be built as a module. If so, the module
527 will be called hih6130.
528
529config SENSORS_IBMAEM
530 tristate "IBM Active Energy Manager temperature/power sensors and control"
531 select IPMI_SI
532 depends on IPMI_HANDLER
533 help
534 If you say yes here you get support for the temperature and
535 power sensors and capping hardware in various IBM System X
536 servers that support Active Energy Manager. This includes
537 the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2,
538 and certain HC10/HS2x/LS2x/QS2x blades.
539
540 This driver can also be built as a module. If so, the module
541 will be called ibmaem.
542
543config SENSORS_IBMPEX
544 tristate "IBM PowerExecutive temperature/power sensors"
545 select IPMI_SI
546 depends on IPMI_HANDLER
547 help
548 If you say yes here you get support for the temperature and
549 power sensors in various IBM System X servers that support
550 PowerExecutive. So far this includes the x3350, x3550, x3650,
551 x3655, and x3755; the x3800, x3850, and x3950 models that have
552 PCI Express; and some of the HS2x, LS2x, and QS2x blades.
553
554 This driver can also be built as a module. If so, the module
555 will be called ibmpex.
556
557config SENSORS_IIO_HWMON
558 tristate "Hwmon driver that uses channels specified via iio maps"
559 depends on IIO
560 help
561 This is a platform driver that in combination with a suitable
562 map allows IIO devices to provide basic hwmon functionality
563 for those channels specified in the map. This map can be provided
564 either via platform data or the device tree bindings.
565
566config SENSORS_CORETEMP
567 tristate "Intel Core/Core2/Atom temperature sensor"
568 depends on X86
569 help
570 If you say yes here you get support for the temperature
571 sensor inside your CPU. Most of the family 6 CPUs
572 are supported. Check Documentation/hwmon/coretemp for details.
573
574config SENSORS_IT87
575 tristate "ITE IT87xx and compatibles"
576 depends on !PPC
577 select HWMON_VID
578 help
579 If you say yes here you get support for ITE IT8705F, IT8712F,
580 IT8716F, IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8758E,
581 IT8771E, IT8772E, IT8782F, IT8783E/F and IT8603E sensor chips,
582 and the SiS950 clone.
583
584 This driver can also be built as a module. If so, the module
585 will be called it87.
586
587config SENSORS_JZ4740
588 tristate "Ingenic JZ4740 SoC ADC driver"
589 depends on MACH_JZ4740 && MFD_JZ4740_ADC
590 help
591 If you say yes here you get support for reading adc values from the ADCIN
592 pin on Ingenic JZ4740 SoC based boards.
593
594 This driver can also be build as a module. If so, the module will be
595 called jz4740-hwmon.
596
597config SENSORS_JC42
598 tristate "JEDEC JC42.4 compliant memory module temperature sensors"
599 depends on I2C
600 help
601 If you say yes here, you get support for JEDEC JC42.4 compliant
602 temperature sensors, which are used on many DDR3 memory modules for
603 mobile devices and servers. Support will include, but not be limited
604 to, ADT7408, AT30TS00, CAT34TS02, CAT6095, MAX6604, MCP9804, MCP9805,
605 MCP98242, MCP98243, MCP98244, MCP9843, SE97, SE98, STTS424(E),
606 STTS2002, STTS3000, TSE2002B3, TSE2002GB2, TS3000B3, and TS3000GB2.
607
608 This driver can also be built as a module. If so, the module
609 will be called jc42.
610
611config SENSORS_LINEAGE
612 tristate "Lineage Compact Power Line Power Entry Module"
613 depends on I2C
614 help
615 If you say yes here you get support for the Lineage Compact Power Line
616 series of DC/DC and AC/DC converters such as CP1800, CP2000AC,
617 CP2000DC, CP2725, and others.
618
619 This driver can also be built as a module. If so, the module
620 will be called lineage-pem.
621
622config SENSORS_LTC2945
623 tristate "Linear Technology LTC2945"
624 depends on I2C
625 select REGMAP_I2C
626 default n
627 help
628 If you say yes here you get support for Linear Technology LTC2945
629 I2C System Monitor.
630
631 This driver can also be built as a module. If so, the module will
632 be called ltc2945.
633
634config SENSORS_LTC4151
635 tristate "Linear Technology LTC4151"
636 depends on I2C
637 default n
638 help
639 If you say yes here you get support for Linear Technology LTC4151
640 High Voltage I2C Current and Voltage Monitor interface.
641
642 This driver can also be built as a module. If so, the module will
643 be called ltc4151.
644
645config SENSORS_LTC4215
646 tristate "Linear Technology LTC4215"
647 depends on I2C
648 default n
649 help
650 If you say yes here you get support for Linear Technology LTC4215
651 Hot Swap Controller I2C interface.
652
653 This driver can also be built as a module. If so, the module will
654 be called ltc4215.
655
656config SENSORS_LTC4222
657 tristate "Linear Technology LTC4222"
658 depends on I2C
659 select REGMAP_I2C
660 default n
661 help
662 If you say yes here you get support for Linear Technology LTC4222
663 Dual Hot Swap Controller I2C interface.
664
665 This driver can also be built as a module. If so, the module will
666 be called ltc4222.
667
668config SENSORS_LTC4245
669 tristate "Linear Technology LTC4245"
670 depends on I2C
671 default n
672 help
673 If you say yes here you get support for Linear Technology LTC4245
674 Multiple Supply Hot Swap Controller I2C interface.
675
676 This driver can also be built as a module. If so, the module will
677 be called ltc4245.
678
679config SENSORS_LTC4260
680 tristate "Linear Technology LTC4260"
681 depends on I2C
682 select REGMAP_I2C
683 default n
684 help
685 If you say yes here you get support for Linear Technology LTC4260
686 Positive Voltage Hot Swap Controller I2C interface.
687
688 This driver can also be built as a module. If so, the module will
689 be called ltc4260.
690
691config SENSORS_LTC4261
692 tristate "Linear Technology LTC4261"
693 depends on I2C
694 default n
695 help
696 If you say yes here you get support for Linear Technology LTC4261
697 Negative Voltage Hot Swap Controller I2C interface.
698
699 This driver can also be built as a module. If so, the module will
700 be called ltc4261.
701
702config SENSORS_MAX1111
703 tristate "Maxim MAX1111 Serial 8-bit ADC chip and compatibles"
704 depends on SPI_MASTER
705 help
706 Say y here to support Maxim's MAX1110, MAX1111, MAX1112, and MAX1113
707 ADC chips.
708
709 This driver can also be built as a module. If so, the module
710 will be called max1111.
711
712config SENSORS_MAX16065
713 tristate "Maxim MAX16065 System Manager and compatibles"
714 depends on I2C
715 help
716 If you say yes here you get support for hardware monitoring
717 capabilities of the following Maxim System Manager chips.
718 MAX16065
719 MAX16066
720 MAX16067
721 MAX16068
722 MAX16070
723 MAX16071
724
725 This driver can also be built as a module. If so, the module
726 will be called max16065.
727
728config SENSORS_MAX1619
729 tristate "Maxim MAX1619 sensor chip"
730 depends on I2C
731 help
732 If you say yes here you get support for MAX1619 sensor chip.
733
734 This driver can also be built as a module. If so, the module
735 will be called max1619.
736
737config SENSORS_MAX1668
738 tristate "Maxim MAX1668 and compatibles"
739 depends on I2C
740 help
741 If you say yes here you get support for MAX1668, MAX1989 and
742 MAX1805 chips.
743
744 This driver can also be built as a module. If so, the module
745 will be called max1668.
746
747config SENSORS_MAX197
748 tristate "Maxim MAX197 and compatibles"
749 help
750 Support for the Maxim MAX197 A/D converter.
751 Support will include, but not be limited to, MAX197, and MAX199.
752
753 This driver can also be built as a module. If so, the module
754 will be called max197.
755
756config SENSORS_MAX6639
757 tristate "Maxim MAX6639 sensor chip"
758 depends on I2C
759 help
760 If you say yes here you get support for the MAX6639
761 sensor chips.
762
763 This driver can also be built as a module. If so, the module
764 will be called max6639.
765
766config SENSORS_MAX6642
767 tristate "Maxim MAX6642 sensor chip"
768 depends on I2C
769 help
770 If you say yes here you get support for MAX6642 sensor chip.
771 MAX6642 is a SMBus-Compatible Remote/Local Temperature Sensor
772 with Overtemperature Alarm from Maxim.
773
774 This driver can also be built as a module. If so, the module
775 will be called max6642.
776
777config SENSORS_MAX6650
778 tristate "Maxim MAX6650 sensor chip"
779 depends on I2C
780 help
781 If you say yes here you get support for the MAX6650 / MAX6651
782 sensor chips.
783
784 This driver can also be built as a module. If so, the module
785 will be called max6650.
786
787config SENSORS_MAX6697
788 tristate "Maxim MAX6697 and compatibles"
789 depends on I2C
790 help
791 If you say yes here you get support for MAX6581, MAX6602, MAX6622,
792 MAX6636, MAX6689, MAX6693, MAX6694, MAX6697, MAX6698, and MAX6699
793 temperature sensor chips.
794
795 This driver can also be built as a module. If so, the module
796 will be called max6697.
797
798config SENSORS_HTU21
799 tristate "Measurement Specialties HTU21D humidity/temperature sensors"
800 depends on I2C
801 help
802 If you say yes here you get support for the Measurement Specialties
803 HTU21D humidity and temperature sensors.
804
805 This driver can also be built as a module. If so, the module
806 will be called htu21.
807
808config SENSORS_MCP3021
809 tristate "Microchip MCP3021 and compatibles"
810 depends on I2C
811 help
812 If you say yes here you get support for MCP3021 and MCP3221.
813 The MCP3021 is a A/D converter (ADC) with 10-bit and the MCP3221
814 with 12-bit resolution.
815
816 This driver can also be built as a module. If so, the module
817 will be called mcp3021.
818
819config SENSORS_ADCXX
820 tristate "National Semiconductor ADCxxxSxxx"
821 depends on SPI_MASTER
822 help
823 If you say yes here you get support for the National Semiconductor
824 ADC<bb><c>S<sss> chip family, where
825 * bb is the resolution in number of bits (8, 10, 12)
826 * c is the number of channels (1, 2, 4, 8)
827 * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500
828 kSPS and 101 for 1 MSPS)
829
830 Examples : ADC081S101, ADC124S501, ...
831
832 This driver can also be built as a module. If so, the module
833 will be called adcxx.
834
835config SENSORS_LM63
836 tristate "National Semiconductor LM63 and compatibles"
837 depends on I2C
838 help
839 If you say yes here you get support for the National
840 Semiconductor LM63, LM64, and LM96163 remote diode digital temperature
841 sensors with integrated fan control. Such chips are found
842 on the Tyan S4882 (Thunder K8QS Pro) motherboard, among
843 others.
844
845 This driver can also be built as a module. If so, the module
846 will be called lm63.
847
848config SENSORS_LM70
849 tristate "National Semiconductor LM70 and compatibles"
850 depends on SPI_MASTER
851 help
852 If you say yes here you get support for the National Semiconductor
853 LM70, LM71, LM74 and Texas Instruments TMP121/TMP123 digital tempera-
854 ture sensor chips.
855
856 This driver can also be built as a module. If so, the module
857 will be called lm70.
858
859config SENSORS_LM73
860 tristate "National Semiconductor LM73"
861 depends on I2C
862 help
863 If you say yes here you get support for National Semiconductor LM73
864 sensor chips.
865 This driver can also be built as a module. If so, the module
866 will be called lm73.
867
868config SENSORS_LM75
869 tristate "National Semiconductor LM75 and compatibles"
870 depends on I2C
871 depends on THERMAL || !THERMAL_OF
872 help
873 If you say yes here you get support for one common type of
874 temperature sensor chip, with models including:
875
876 - Analog Devices ADT75
877 - Dallas Semiconductor DS75, DS1775 and DS7505
878 - Global Mixed-mode Technology (GMT) G751
879 - Maxim MAX6625 and MAX6626
880 - Microchip MCP980x
881 - National Semiconductor LM75, LM75A
882 - NXP's LM75A
883 - ST Microelectronics STDS75
884 - TelCom (now Microchip) TCN75
885 - Texas Instruments TMP100, TMP101, TMP105, TMP75, TMP175,
886 TMP275
887
888 This driver supports driver model based binding through board
889 specific I2C device tables.
890
891 It also supports the "legacy" style of driver binding. To use
892 that with some chips which don't replicate LM75 quirks exactly,
893 you may need the "force" module parameter.
894
895 This driver can also be built as a module. If so, the module
896 will be called lm75.
897
898config SENSORS_LM77
899 tristate "National Semiconductor LM77"
900 depends on I2C
901 help
902 If you say yes here you get support for National Semiconductor LM77
903 sensor chips.
904
905 This driver can also be built as a module. If so, the module
906 will be called lm77.
907
908config SENSORS_LM78
909 tristate "National Semiconductor LM78 and compatibles"
910 depends on I2C
911 select HWMON_VID
912 help
913 If you say yes here you get support for National Semiconductor LM78,
914 LM78-J and LM79.
915
916 This driver can also be built as a module. If so, the module
917 will be called lm78.
918
919config SENSORS_LM80
920 tristate "National Semiconductor LM80 and LM96080"
921 depends on I2C
922 help
923 If you say yes here you get support for National Semiconductor
924 LM80 and LM96080 sensor chips.
925
926 This driver can also be built as a module. If so, the module
927 will be called lm80.
928
929config SENSORS_LM83
930 tristate "National Semiconductor LM83 and compatibles"
931 depends on I2C
932 help
933 If you say yes here you get support for National Semiconductor
934 LM82 and LM83 sensor chips.
935
936 This driver can also be built as a module. If so, the module
937 will be called lm83.
938
939config SENSORS_LM85
940 tristate "National Semiconductor LM85 and compatibles"
941 depends on I2C
942 select HWMON_VID
943 help
944 If you say yes here you get support for National Semiconductor LM85
945 sensor chips and clones: ADM1027, ADT7463, ADT7468, EMC6D100,
946 EMC6D101, EMC6D102, and EMC6D103.
947
948 This driver can also be built as a module. If so, the module
949 will be called lm85.
950
951config SENSORS_LM87
952 tristate "National Semiconductor LM87 and compatibles"
953 depends on I2C
954 select HWMON_VID
955 help
956 If you say yes here you get support for National Semiconductor LM87
957 and Analog Devices ADM1024 sensor chips.
958
959 This driver can also be built as a module. If so, the module
960 will be called lm87.
961
962config SENSORS_LM90
963 tristate "National Semiconductor LM90 and compatibles"
964 depends on I2C
965 help
966 If you say yes here you get support for National Semiconductor LM90,
967 LM86, LM89 and LM99, Analog Devices ADM1032, ADT7461, and ADT7461A,
968 Maxim MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659,
969 MAX6680, MAX6681, MAX6692, MAX6695, MAX6696, ON Semiconductor NCT1008,
970 Winbond/Nuvoton W83L771W/G/AWG/ASG, Philips SA56004, and GMT G781
971 sensor chips.
972
973 This driver can also be built as a module. If so, the module
974 will be called lm90.
975
976config SENSORS_LM92
977 tristate "National Semiconductor LM92 and compatibles"
978 depends on I2C
979 help
980 If you say yes here you get support for National Semiconductor LM92
981 and Maxim MAX6635 sensor chips.
982
983 This driver can also be built as a module. If so, the module
984 will be called lm92.
985
986config SENSORS_LM93
987 tristate "National Semiconductor LM93 and compatibles"
988 depends on I2C
989 select HWMON_VID
990 help
991 If you say yes here you get support for National Semiconductor LM93,
992 LM94, and compatible sensor chips.
993
994 This driver can also be built as a module. If so, the module
995 will be called lm93.
996
997config SENSORS_LM95234
998 tristate "National Semiconductor LM95234"
999 depends on I2C
1000 help
1001 If you say yes here you get support for the LM95234 temperature
1002 sensor.
1003
1004 This driver can also be built as a module. If so, the module
1005 will be called lm95234.
1006
1007config SENSORS_LM95241
1008 tristate "National Semiconductor LM95241 and compatibles"
1009 depends on I2C
1010 help
1011 If you say yes here you get support for LM95231 and LM95241 sensor
1012 chips.
1013
1014 This driver can also be built as a module. If so, the module
1015 will be called lm95241.
1016
1017config SENSORS_LM95245
1018 tristate "National Semiconductor LM95245 sensor chip"
1019 depends on I2C
1020 help
1021 If you say yes here you get support for LM95245 sensor chip.
1022
1023 This driver can also be built as a module. If so, the module
1024 will be called lm95245.
1025
1026config SENSORS_PC87360
1027 tristate "National Semiconductor PC87360 family"
1028 depends on !PPC
1029 select HWMON_VID
1030 help
1031 If you say yes here you get access to the hardware monitoring
1032 functions of the National Semiconductor PC8736x Super-I/O chips.
1033 The PC87360, PC87363 and PC87364 only have fan monitoring and
1034 control. The PC87365 and PC87366 additionally have voltage and
1035 temperature monitoring.
1036
1037 This driver can also be built as a module. If so, the module
1038 will be called pc87360.
1039
1040config SENSORS_PC87427
1041 tristate "National Semiconductor PC87427"
1042 depends on !PPC
1043 help
1044 If you say yes here you get access to the hardware monitoring
1045 functions of the National Semiconductor PC87427 Super-I/O chip.
1046 The chip has two distinct logical devices, one for fan speed
1047 monitoring and control, and one for voltage and temperature
1048 monitoring. Fan speed monitoring and control are supported, as
1049 well as temperature monitoring. Voltages aren't supported yet.
1050
1051 This driver can also be built as a module. If so, the module
1052 will be called pc87427.
1053
1054config SENSORS_NTC_THERMISTOR
1055 tristate "NTC thermistor support"
1056 depends on !OF || IIO=n || IIO
1057 help
1058 This driver supports NTC thermistors sensor reading and its
1059 interpretation. The driver can also monitor the temperature and
1060 send notifications about the temperature.
1061
1062 Currently, this driver supports
1063 NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, and NCP15WL333.
1064
1065 This driver can also be built as a module. If so, the module
1066 will be called ntc-thermistor.
1067
1068config SENSORS_NCT6775
1069 tristate "Nuvoton NCT6775F and compatibles"
1070 depends on !PPC
1071 select HWMON_VID
1072 help
1073 If you say yes here you get support for the hardware monitoring
1074 functionality of the Nuvoton NCT6775F, NCT6776F, NCT6779D
1075 and compatible Super-I/O chips. This driver replaces the
1076 w83627ehf driver for NCT6775F and NCT6776F.
1077
1078 This driver can also be built as a module. If so, the module
1079 will be called nct6775.
1080
1081config SENSORS_PCF8591
1082 tristate "Philips PCF8591 ADC/DAC"
1083 depends on I2C
1084 default n
1085 help
1086 If you say yes here you get support for Philips PCF8591 4-channel
1087 ADC, 1-channel DAC chips.
1088
1089 This driver can also be built as a module. If so, the module
1090 will be called pcf8591.
1091
1092 These devices are hard to detect and rarely found on mainstream
1093 hardware. If unsure, say N.
1094
1095source drivers/hwmon/pmbus/Kconfig
1096
1097config SENSORS_SHT15
1098 tristate "Sensiron humidity and temperature sensors. SHT15 and compat."
1099 depends on GPIOLIB
1100 help
1101 If you say yes here you get support for the Sensiron SHT10, SHT11,
1102 SHT15, SHT71, SHT75 humidity and temperature sensors.
1103
1104 This driver can also be built as a module. If so, the module
1105 will be called sht15.
1106
1107config SENSORS_SHT21
1108 tristate "Sensiron humidity and temperature sensors. SHT21 and compat."
1109 depends on I2C
1110 help
1111 If you say yes here you get support for the Sensiron SHT21, SHT25
1112 humidity and temperature sensors.
1113
1114 This driver can also be built as a module. If so, the module
1115 will be called sht21.
1116
1117config SENSORS_S3C
1118 tristate "Samsung built-in ADC"
1119 depends on S3C_ADC
1120 help
1121 If you say yes here you get support for the on-board ADCs of
1122 the Samsung S3C24XX, S3C64XX and other series of SoC
1123
1124 This driver can also be built as a module. If so, the module
1125 will be called s3c-hwmon.
1126
1127config SENSORS_S3C_RAW
1128 bool "Include raw channel attributes in sysfs"
1129 depends on SENSORS_S3C
1130 help
1131 Say Y here if you want to include raw copies of all the ADC
1132 channels in sysfs.
1133
1134config SENSORS_SIS5595
1135 tristate "Silicon Integrated Systems Corp. SiS5595"
1136 depends on PCI
1137 help
1138 If you say yes here you get support for the integrated sensors in
1139 SiS5595 South Bridges.
1140
1141 This driver can also be built as a module. If so, the module
1142 will be called sis5595.
1143
1144config SENSORS_DME1737
1145 tristate "SMSC DME1737, SCH311x and compatibles"
1146 depends on I2C && !PPC
1147 select HWMON_VID
1148 help
1149 If you say yes here you get support for the hardware monitoring
1150 and fan control features of the SMSC DME1737, SCH311x, SCH5027, and
1151 Asus A8000 Super-I/O chips.
1152
1153 This driver can also be built as a module. If so, the module
1154 will be called dme1737.
1155
1156config SENSORS_EMC1403
1157 tristate "SMSC EMC1403/23 thermal sensor"
1158 depends on I2C
1159 help
1160 If you say yes here you get support for the SMSC EMC1403/23
1161 temperature monitoring chip.
1162
1163 Threshold values can be configured using sysfs.
1164 Data from the different diodes are accessible via sysfs.
1165
1166config SENSORS_EMC2103
1167 tristate "SMSC EMC2103"
1168 depends on I2C
1169 help
1170 If you say yes here you get support for the temperature
1171 and fan sensors of the SMSC EMC2103 chips.
1172
1173 This driver can also be built as a module. If so, the module
1174 will be called emc2103.
1175
1176config SENSORS_EMC6W201
1177 tristate "SMSC EMC6W201"
1178 depends on I2C
1179 help
1180 If you say yes here you get support for the SMSC EMC6W201
1181 hardware monitoring chip.
1182
1183 This driver can also be built as a module. If so, the module
1184 will be called emc6w201.
1185
1186config SENSORS_SMSC47M1
1187 tristate "SMSC LPC47M10x and compatibles"
1188 depends on !PPC
1189 help
1190 If you say yes here you get support for the integrated fan
1191 monitoring and control capabilities of the SMSC LPC47B27x,
1192 LPC47M10x, LPC47M112, LPC47M13x, LPC47M14x, LPC47M15x,
1193 LPC47M192, LPC47M292 and LPC47M997 chips.
1194
1195 The temperature and voltage sensor features of the LPC47M15x,
1196 LPC47M192, LPC47M292 and LPC47M997 are supported by another
1197 driver, select also "SMSC LPC47M192 and compatibles" below for
1198 those.
1199
1200 This driver can also be built as a module. If so, the module
1201 will be called smsc47m1.
1202
1203config SENSORS_SMSC47M192
1204 tristate "SMSC LPC47M192 and compatibles"
1205 depends on I2C
1206 select HWMON_VID
1207 help
1208 If you say yes here you get support for the temperature and
1209 voltage sensors of the SMSC LPC47M192, LPC47M15x, LPC47M292
1210 and LPC47M997 chips.
1211
1212 The fan monitoring and control capabilities of these chips
1213 are supported by another driver, select
1214 "SMSC LPC47M10x and compatibles" above. You need both drivers
1215 if you want fan control and voltage/temperature sensor support.
1216
1217 This driver can also be built as a module. If so, the module
1218 will be called smsc47m192.
1219
1220config SENSORS_SMSC47B397
1221 tristate "SMSC LPC47B397-NC"
1222 depends on !PPC
1223 help
1224 If you say yes here you get support for the SMSC LPC47B397-NC
1225 sensor chip.
1226
1227 This driver can also be built as a module. If so, the module
1228 will be called smsc47b397.
1229
1230config SENSORS_SCH56XX_COMMON
1231 tristate
1232 default n
1233
1234config SENSORS_SCH5627
1235 tristate "SMSC SCH5627"
1236 depends on !PPC && WATCHDOG
1237 select SENSORS_SCH56XX_COMMON
1238 select WATCHDOG_CORE
1239 help
1240 If you say yes here you get support for the hardware monitoring
1241 features of the SMSC SCH5627 Super-I/O chip including support for
1242 the integrated watchdog.
1243
1244 This driver can also be built as a module. If so, the module
1245 will be called sch5627.
1246
1247config SENSORS_SCH5636
1248 tristate "SMSC SCH5636"
1249 depends on !PPC && WATCHDOG
1250 select SENSORS_SCH56XX_COMMON
1251 select WATCHDOG_CORE
1252 help
1253 SMSC SCH5636 Super I/O chips include an embedded microcontroller for
1254 hardware monitoring solutions, allowing motherboard manufacturers to
1255 create their own custom hwmon solution based upon the SCH5636.
1256
1257 Currently this driver only supports the Fujitsu Theseus SCH5636 based
1258 hwmon solution. Say yes here if you want support for the Fujitsu
1259 Theseus' hardware monitoring features including support for the
1260 integrated watchdog.
1261
1262 This driver can also be built as a module. If so, the module
1263 will be called sch5636.
1264
1265config SENSORS_SMM665
1266 tristate "Summit Microelectronics SMM665"
1267 depends on I2C
1268 default n
1269 help
1270 If you say yes here you get support for the hardware monitoring
1271 features of the Summit Microelectronics SMM665/SMM665B Six-Channel
1272 Active DC Output Controller / Monitor.
1273
1274 Other supported chips are SMM465, SMM665C, SMM764, and SMM766.
1275 Support for those chips is untested.
1276
1277 This driver can also be built as a module. If so, the module will
1278 be called smm665.
1279
1280config SENSORS_ADC128D818
1281 tristate "Texas Instruments ADC128D818"
1282 depends on I2C
1283 help
1284 If you say yes here you get support for the Texas Instruments
1285 ADC128D818 System Monitor with Temperature Sensor chip.
1286
1287 This driver can also be built as a module. If so, the module
1288 will be called adc128d818.
1289
1290config SENSORS_ADS1015
1291 tristate "Texas Instruments ADS1015"
1292 depends on I2C
1293 help
1294 If you say yes here you get support for Texas Instruments
1295 ADS1015/ADS1115 12/16-bit 4-input ADC device.
1296
1297 This driver can also be built as a module. If so, the module
1298 will be called ads1015.
1299
1300config SENSORS_ADS7828
1301 tristate "Texas Instruments ADS7828 and compatibles"
1302 depends on I2C
1303 help
1304 If you say yes here you get support for Texas Instruments ADS7828 and
1305 ADS7830 8-channel A/D converters. ADS7828 resolution is 12-bit, while
1306 it is 8-bit on ADS7830.
1307
1308 This driver can also be built as a module. If so, the module
1309 will be called ads7828.
1310
1311config SENSORS_ADS7871
1312 tristate "Texas Instruments ADS7871 A/D converter"
1313 depends on SPI
1314 help
1315 If you say yes here you get support for TI ADS7871 & ADS7870
1316
1317 This driver can also be built as a module. If so, the module
1318 will be called ads7871.
1319
1320config SENSORS_AMC6821
1321 tristate "Texas Instruments AMC6821"
1322 depends on I2C
1323 help
1324 If you say yes here you get support for the Texas Instruments
1325 AMC6821 hardware monitoring chips.
1326
1327 This driver can also be build as a module. If so, the module
1328 will be called amc6821.
1329
1330config SENSORS_INA209
1331 tristate "TI / Burr Brown INA209"
1332 depends on I2C
1333 help
1334 If you say yes here you get support for the TI / Burr Brown INA209
1335 voltage / current / power monitor I2C interface.
1336
1337 This driver can also be built as a module. If so, the module will
1338 be called ina209.
1339
1340config SENSORS_INA2XX
1341 tristate "Texas Instruments INA219 and compatibles"
1342 depends on I2C
1343 help
1344 If you say yes here you get support for INA219, INA220, INA226, and
1345 INA230 power monitor chips.
1346
1347 The INA2xx driver is configured for the default configuration of
1348 the part as described in the datasheet.
1349 Default value for Rshunt is 10 mOhms.
1350 This driver can also be built as a module. If so, the module
1351 will be called ina2xx.
1352
1353config SENSORS_THMC50
1354 tristate "Texas Instruments THMC50 / Analog Devices ADM1022"
1355 depends on I2C
1356 help
1357 If you say yes here you get support for Texas Instruments THMC50
1358 sensor chips and clones: the Analog Devices ADM1022.
1359
1360 This driver can also be built as a module. If so, the module
1361 will be called thmc50.
1362
1363config SENSORS_TMP102
1364 tristate "Texas Instruments TMP102"
1365 depends on I2C
1366 depends on THERMAL || !THERMAL_OF
1367 help
1368 If you say yes here you get support for Texas Instruments TMP102
1369 sensor chips.
1370
1371 This driver can also be built as a module. If so, the module
1372 will be called tmp102.
1373
1374config SENSORS_TMP401
1375 tristate "Texas Instruments TMP401 and compatibles"
1376 depends on I2C
1377 help
1378 If you say yes here you get support for Texas Instruments TMP401,
1379 TMP411, TMP431, and TMP432 temperature sensor chips.
1380
1381 This driver can also be built as a module. If so, the module
1382 will be called tmp401.
1383
1384config SENSORS_TMP421
1385 tristate "Texas Instruments TMP421 and compatible"
1386 depends on I2C
1387 help
1388 If you say yes here you get support for Texas Instruments TMP421,
1389 TMP422 and TMP423 temperature sensor chips.
1390
1391 This driver can also be built as a module. If so, the module
1392 will be called tmp421.
1393
1394config SENSORS_TWL4030_MADC
1395 tristate "Texas Instruments TWL4030 MADC Hwmon"
1396 depends on TWL4030_MADC
1397 help
1398 If you say yes here you get hwmon support for triton
1399 TWL4030-MADC.
1400
1401 This driver can also be built as a module. If so it will be called
1402 twl4030-madc-hwmon.
1403
1404config SENSORS_VEXPRESS
1405 tristate "Versatile Express"
1406 depends on VEXPRESS_CONFIG
1407 help
1408 This driver provides support for hardware sensors available on
1409 the ARM Ltd's Versatile Express platform. It can provide wide
1410 range of information like temperature, power, energy.
1411
1412config SENSORS_VIA_CPUTEMP
1413 tristate "VIA CPU temperature sensor"
1414 depends on X86
1415 select HWMON_VID
1416 help
1417 If you say yes here you get support for the temperature
1418 sensor inside your CPU. Supported are all known variants of
1419 the VIA C7 and Nano.
1420
1421config SENSORS_VIA686A
1422 tristate "VIA686A"
1423 depends on PCI
1424 help
1425 If you say yes here you get support for the integrated sensors in
1426 Via 686A/B South Bridges.
1427
1428 This driver can also be built as a module. If so, the module
1429 will be called via686a.
1430
1431config SENSORS_VT1211
1432 tristate "VIA VT1211"
1433 depends on !PPC
1434 select HWMON_VID
1435 help
1436 If you say yes here then you get support for hardware monitoring
1437 features of the VIA VT1211 Super-I/O chip.
1438
1439 This driver can also be built as a module. If so, the module
1440 will be called vt1211.
1441
1442config SENSORS_VT8231
1443 tristate "VIA VT8231"
1444 depends on PCI
1445 select HWMON_VID
1446 help
1447 If you say yes here then you get support for the integrated sensors
1448 in the VIA VT8231 device.
1449
1450 This driver can also be built as a module. If so, the module
1451 will be called vt8231.
1452
1453config SENSORS_W83781D
1454 tristate "Winbond W83781D, W83782D, W83783S, Asus AS99127F"
1455 depends on I2C
1456 select HWMON_VID
1457 help
1458 If you say yes here you get support for the Winbond W8378x series
1459 of sensor chips: the W83781D, W83782D and W83783S, and the similar
1460 Asus AS99127F.
1461
1462 This driver can also be built as a module. If so, the module
1463 will be called w83781d.
1464
1465config SENSORS_W83791D
1466 tristate "Winbond W83791D"
1467 depends on I2C
1468 select HWMON_VID
1469 help
1470 If you say yes here you get support for the Winbond W83791D chip.
1471
1472 This driver can also be built as a module. If so, the module
1473 will be called w83791d.
1474
1475config SENSORS_W83792D
1476 tristate "Winbond W83792D"
1477 depends on I2C
1478 help
1479 If you say yes here you get support for the Winbond W83792D chip.
1480
1481 This driver can also be built as a module. If so, the module
1482 will be called w83792d.
1483
1484config SENSORS_W83793
1485 tristate "Winbond W83793"
1486 depends on I2C
1487 select HWMON_VID
1488 help
1489 If you say yes here you get support for the Winbond W83793
1490 hardware monitoring chip, including support for the integrated
1491 watchdog.
1492
1493 This driver can also be built as a module. If so, the module
1494 will be called w83793.
1495
1496config SENSORS_W83795
1497 tristate "Winbond/Nuvoton W83795G/ADG"
1498 depends on I2C
1499 help
1500 If you say yes here you get support for the Winbond W83795G and
1501 W83795ADG hardware monitoring chip, including manual fan speed
1502 control.
1503
1504 This driver can also be built as a module. If so, the module
1505 will be called w83795.
1506
1507config SENSORS_W83795_FANCTRL
1508 boolean "Include automatic fan control support (DANGEROUS)"
1509 depends on SENSORS_W83795
1510 default n
1511 help
1512 If you say yes here, support for automatic fan speed control
1513 will be included in the driver.
1514
1515 This part of the code wasn't carefully reviewed and tested yet,
1516 so enabling this option is strongly discouraged on production
1517 servers. Only developers and testers should enable it for the
1518 time being.
1519
1520 Please also note that this option will create sysfs attribute
1521 files which may change in the future, so you shouldn't rely
1522 on them being stable.
1523
1524config SENSORS_W83L785TS
1525 tristate "Winbond W83L785TS-S"
1526 depends on I2C
1527 help
1528 If you say yes here you get support for the Winbond W83L785TS-S
1529 sensor chip, which is used on the Asus A7N8X, among other
1530 motherboards.
1531
1532 This driver can also be built as a module. If so, the module
1533 will be called w83l785ts.
1534
1535config SENSORS_W83L786NG
1536 tristate "Winbond W83L786NG, W83L786NR"
1537 depends on I2C
1538 help
1539 If you say yes here you get support for the Winbond W83L786NG
1540 and W83L786NR sensor chips.
1541
1542 This driver can also be built as a module. If so, the module
1543 will be called w83l786ng.
1544
1545config SENSORS_W83627HF
1546 tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF"
1547 depends on !PPC
1548 select HWMON_VID
1549 help
1550 If you say yes here you get support for the Winbond W836X7 series
1551 of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and
1552 W83697HF.
1553
1554 This driver can also be built as a module. If so, the module
1555 will be called w83627hf.
1556
1557config SENSORS_W83627EHF
1558 tristate "Winbond W83627EHF/EHG/DHG/UHG, W83667HG, NCT6775F, NCT6776F"
1559 depends on !PPC
1560 select HWMON_VID
1561 help
1562 If you say yes here you get support for the hardware
1563 monitoring functionality of the Winbond W83627EHF Super-I/O chip.
1564
1565 This driver also supports the W83627EHG, which is the lead-free
1566 version of the W83627EHF, and the W83627DHG, which is a similar
1567 chip suited for specific Intel processors that use PECI such as
1568 the Core 2 Duo. And also the W83627UHG, which is a stripped down
1569 version of the W83627DHG (as far as hardware monitoring goes.)
1570
1571 This driver also supports Nuvoton W83667HG, W83667HG-B, NCT6775F
1572 (also known as W83667HG-I), and NCT6776F.
1573
1574 This driver can also be built as a module. If so, the module
1575 will be called w83627ehf.
1576
1577config SENSORS_WM831X
1578 tristate "WM831x PMICs"
1579 depends on MFD_WM831X
1580 help
1581 If you say yes here you get support for the hardware
1582 monitoring functionality of the Wolfson Microelectronics
1583 WM831x series of PMICs.
1584
1585 This driver can also be built as a module. If so, the module
1586 will be called wm831x-hwmon.
1587
1588config SENSORS_WM8350
1589 tristate "Wolfson Microelectronics WM835x"
1590 depends on MFD_WM8350
1591 help
1592 If you say yes here you get support for the hardware
1593 monitoring features of the WM835x series of PMICs.
1594
1595 This driver can also be built as a module. If so, the module
1596 will be called wm8350-hwmon.
1597
1598config SENSORS_ULTRA45
1599 tristate "Sun Ultra45 PIC16F747"
1600 depends on SPARC64
1601 help
1602 This driver provides support for the Ultra45 workstation environmental
1603 sensors.
1604
1605if ACPI
1606
1607comment "ACPI drivers"
1608
1609config SENSORS_ACPI_POWER
1610 tristate "ACPI 4.0 power meter"
1611 help
1612 This driver exposes ACPI 4.0 power meters as hardware monitoring
1613 devices. Say Y (or M) if you have a computer with ACPI 4.0 firmware
1614 and a power meter.
1615
1616 To compile this driver as a module, choose M here:
1617 the module will be called acpi_power_meter.
1618
1619config SENSORS_ATK0110
1620 tristate "ASUS ATK0110"
1621 depends on X86
1622 help
1623 If you say yes here you get support for the ACPI hardware
1624 monitoring interface found in many ASUS motherboards. This
1625 driver will provide readings of fans, voltages and temperatures
1626 through the system firmware.
1627
1628 This driver can also be built as a module. If so, the module
1629 will be called asus_atk0110.
1630
1631endif # ACPI
1632
1633endif # HWMON