Linux Audio

Check our new training course

Loading...
v6.8
  1// SPDX-License-Identifier: GPL-2.0-only
  2/*
  3 * Common pmac/prep/chrp pci routines. -- Cort
  4 */
  5
  6#include <linux/kernel.h>
  7#include <linux/pci.h>
  8#include <linux/delay.h>
  9#include <linux/string.h>
 10#include <linux/init.h>
 11#include <linux/capability.h>
 12#include <linux/sched.h>
 13#include <linux/errno.h>
 14#include <linux/memblock.h>
 15#include <linux/syscalls.h>
 16#include <linux/irq.h>
 17#include <linux/list.h>
 18#include <linux/of.h>
 19#include <linux/slab.h>
 20#include <linux/export.h>
 21
 22#include <asm/processor.h>
 23#include <asm/io.h>
 
 24#include <asm/sections.h>
 25#include <asm/pci-bridge.h>
 26#include <asm/ppc-pci.h>
 27#include <asm/byteorder.h>
 28#include <linux/uaccess.h>
 29#include <asm/machdep.h>
 30
 31#undef DEBUG
 32
 33unsigned long isa_io_base     = 0;
 34unsigned long pci_dram_offset = 0;
 35int pcibios_assign_bus_offset = 1;
 36EXPORT_SYMBOL(isa_io_base);
 37EXPORT_SYMBOL(pci_dram_offset);
 38
 39static void fixup_cpc710_pci64(struct pci_dev* dev);
 
 40
 41/* By default, we don't re-assign bus numbers. We do this only on
 42 * some pmacs
 43 */
 44static int pci_assign_all_buses;
 45
 
 
 46/* This will remain NULL for now, until isa-bridge.c is made common
 47 * to both 32-bit and 64-bit.
 48 */
 49struct pci_dev *isa_bridge_pcidev;
 50EXPORT_SYMBOL_GPL(isa_bridge_pcidev);
 51
 52static void
 53fixup_cpc710_pci64(struct pci_dev* dev)
 54{
 55	/* Hide the PCI64 BARs from the kernel as their content doesn't
 56	 * fit well in the resource management
 57	 */
 58	dev->resource[0].start = dev->resource[0].end = 0;
 59	dev->resource[0].flags = 0;
 60	dev->resource[1].start = dev->resource[1].end = 0;
 61	dev->resource[1].flags = 0;
 62}
 63DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_IBM,	PCI_DEVICE_ID_IBM_CPC710_PCI64,	fixup_cpc710_pci64);
 64
 65#ifdef CONFIG_PPC_PCI_OF_BUS_MAP
 66
 67static u8* pci_to_OF_bus_map;
 68static int pci_bus_count;
 69
 70/*
 71 * Functions below are used on OpenFirmware machines.
 72 */
 73static void
 74make_one_node_map(struct device_node* node, u8 pci_bus)
 75{
 76	const int *bus_range;
 77	int len;
 78
 79	if (pci_bus >= pci_bus_count)
 80		return;
 81	bus_range = of_get_property(node, "bus-range", &len);
 82	if (bus_range == NULL || len < 2 * sizeof(int)) {
 83		printk(KERN_WARNING "Can't get bus-range for %pOF, "
 84		       "assuming it starts at 0\n", node);
 85		pci_to_OF_bus_map[pci_bus] = 0;
 86	} else
 87		pci_to_OF_bus_map[pci_bus] = bus_range[0];
 88
 89	for_each_child_of_node(node, node) {
 90		struct pci_dev* dev;
 91		const unsigned int *class_code, *reg;
 92	
 93		class_code = of_get_property(node, "class-code", NULL);
 94		if (!class_code || ((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI &&
 95			(*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS))
 96			continue;
 97		reg = of_get_property(node, "reg", NULL);
 98		if (!reg)
 99			continue;
100		dev = pci_get_domain_bus_and_slot(0, pci_bus,
101						  ((reg[0] >> 8) & 0xff));
102		if (!dev || !dev->subordinate) {
103			pci_dev_put(dev);
104			continue;
105		}
106		make_one_node_map(node, dev->subordinate->number);
107		pci_dev_put(dev);
108	}
109}
110	
111static void __init
112pcibios_make_OF_bus_map(void)
113{
114	int i;
115	struct pci_controller *hose, *tmp;
116	struct property *map_prop;
117	struct device_node *dn;
118
119	pci_to_OF_bus_map = kmalloc(pci_bus_count, GFP_KERNEL);
120	if (!pci_to_OF_bus_map) {
121		printk(KERN_ERR "Can't allocate OF bus map !\n");
122		return;
123	}
124
125	/* We fill the bus map with invalid values, that helps
126	 * debugging.
127	 */
128	for (i=0; i<pci_bus_count; i++)
129		pci_to_OF_bus_map[i] = 0xff;
130
131	/* For each hose, we begin searching bridges */
132	list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
133		struct device_node* node = hose->dn;
134
135		if (!node)
136			continue;
137		make_one_node_map(node, hose->first_busno);
138	}
139	dn = of_find_node_by_path("/");
140	map_prop = of_find_property(dn, "pci-OF-bus-map", NULL);
141	if (map_prop) {
142		BUG_ON(pci_bus_count > map_prop->length);
143		memcpy(map_prop->value, pci_to_OF_bus_map, pci_bus_count);
144	}
145	of_node_put(dn);
146#ifdef DEBUG
147	printk("PCI->OF bus map:\n");
148	for (i=0; i<pci_bus_count; i++) {
149		if (pci_to_OF_bus_map[i] == 0xff)
150			continue;
151		printk("%d -> %d\n", i, pci_to_OF_bus_map[i]);
152	}
153#endif
154}
155#endif // CONFIG_PPC_PCI_OF_BUS_MAP
156
157
158#ifdef CONFIG_PPC_PMAC
159/*
160 * Returns the PCI device matching a given OF node
161 */
162int pci_device_from_OF_node(struct device_node *node, u8 *bus, u8 *devfn)
163{
164#ifdef CONFIG_PPC_PCI_OF_BUS_MAP
165	struct pci_dev *dev = NULL;
166#endif
167	const __be32 *reg;
168	int size;
169
170	/* Check if it might have a chance to be a PCI device */
171	if (!pci_find_hose_for_OF_device(node))
172		return -ENODEV;
173
174	reg = of_get_property(node, "reg", &size);
175	if (!reg || size < 5 * sizeof(u32))
176		return -ENODEV;
177
178	*bus = (be32_to_cpup(&reg[0]) >> 16) & 0xff;
179	*devfn = (be32_to_cpup(&reg[0]) >> 8) & 0xff;
180
181#ifndef CONFIG_PPC_PCI_OF_BUS_MAP
182	return 0;
183#else
184	/* Ok, here we need some tweak. If we have already renumbered
185	 * all busses, we can't rely on the OF bus number any more.
186	 * the pci_to_OF_bus_map is not enough as several PCI busses
187	 * may match the same OF bus number.
188	 */
189	if (!pci_to_OF_bus_map)
190		return 0;
191
192	for_each_pci_dev(dev)
193		if (pci_to_OF_bus_map[dev->bus->number] == *bus &&
194				dev->devfn == *devfn) {
195			*bus = dev->bus->number;
196			pci_dev_put(dev);
197			return 0;
198		}
199
200	return -ENODEV;
201#endif // CONFIG_PPC_PCI_OF_BUS_MAP
202}
203EXPORT_SYMBOL(pci_device_from_OF_node);
204#endif
205
206#ifdef CONFIG_PPC_PCI_OF_BUS_MAP
207/* We create the "pci-OF-bus-map" property now so it appears in the
208 * /proc device tree
209 */
210void __init
211pci_create_OF_bus_map(void)
212{
213	struct property* of_prop;
214	struct device_node *dn;
215
216	of_prop = memblock_alloc(sizeof(struct property) + 256,
217				 SMP_CACHE_BYTES);
218	if (!of_prop)
219		panic("%s: Failed to allocate %zu bytes\n", __func__,
220		      sizeof(struct property) + 256);
221	dn = of_find_node_by_path("/");
222	if (dn) {
223		memset(of_prop, -1, sizeof(struct property) + 256);
224		of_prop->name = "pci-OF-bus-map";
225		of_prop->length = 256;
226		of_prop->value = &of_prop[1];
227		of_add_property(dn, of_prop);
228		of_node_put(dn);
229	}
230}
231#endif // CONFIG_PPC_PCI_OF_BUS_MAP
232
233void pcibios_setup_phb_io_space(struct pci_controller *hose)
234{
235	unsigned long io_offset;
236	struct resource *res = &hose->io_resource;
237
238	/* Fixup IO space offset */
239	io_offset = pcibios_io_space_offset(hose);
240	res->start += io_offset;
241	res->end += io_offset;
242}
243
244static int __init pcibios_init(void)
245{
246	struct pci_controller *hose, *tmp;
247#ifndef CONFIG_PPC_PCI_BUS_NUM_DOMAIN_DEPENDENT
248	int next_busno = 0;
249#endif
250
251	printk(KERN_INFO "PCI: Probing PCI hardware\n");
252
253#ifdef CONFIG_PPC_PCI_BUS_NUM_DOMAIN_DEPENDENT
254	/*
255	 * Enable PCI domains in /proc when PCI bus numbers are not unique
256	 * across all PCI domains to prevent conflicts. And keep PCI domain 0
257	 * backward compatible in /proc for video cards.
258	 */
259	pci_add_flags(PCI_ENABLE_PROC_DOMAINS | PCI_COMPAT_DOMAIN_0);
260#endif
261
262	if (pci_has_flag(PCI_REASSIGN_ALL_BUS))
263		pci_assign_all_buses = 1;
264
265	/* Scan all of the recorded PCI controllers.  */
266	list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
267#ifndef CONFIG_PPC_PCI_BUS_NUM_DOMAIN_DEPENDENT
268		if (pci_assign_all_buses)
269			hose->first_busno = next_busno;
270#endif
271		hose->last_busno = 0xff;
272		pcibios_scan_phb(hose);
273		pci_bus_add_devices(hose->bus);
274#ifndef CONFIG_PPC_PCI_BUS_NUM_DOMAIN_DEPENDENT
275		if (pci_assign_all_buses || next_busno <= hose->last_busno)
276			next_busno = hose->last_busno + pcibios_assign_bus_offset;
277#endif
278	}
279
280#if defined(CONFIG_PPC_PMAC) || defined(CONFIG_PPC_CHRP)
281#ifdef CONFIG_PPC_PCI_OF_BUS_MAP
282	pci_bus_count = next_busno;
283
284	/* OpenFirmware based machines need a map of OF bus
285	 * numbers vs. kernel bus numbers since we may have to
286	 * remap them.
287	 */
288	if (pci_assign_all_buses)
289		pcibios_make_OF_bus_map();
290#endif
291#endif
292
293	/* Call common code to handle resource allocation */
294	pcibios_resource_survey();
295
296	/* Call machine dependent fixup */
297	if (ppc_md.pcibios_fixup)
298		ppc_md.pcibios_fixup();
299
300	/* Call machine dependent post-init code */
301	if (ppc_md.pcibios_after_init)
302		ppc_md.pcibios_after_init();
303
304	return 0;
305}
306
307subsys_initcall(pcibios_init);
308
309static struct pci_controller*
310pci_bus_to_hose(int bus)
311{
312	struct pci_controller *hose, *tmp;
313
314	list_for_each_entry_safe(hose, tmp, &hose_list, list_node)
315		if (bus >= hose->first_busno && bus <= hose->last_busno)
316			return hose;
317	return NULL;
318}
319
320/* Provide information on locations of various I/O regions in physical
321 * memory.  Do this on a per-card basis so that we choose the right
322 * root bridge.
323 * Note that the returned IO or memory base is a physical address
324 */
325
326SYSCALL_DEFINE3(pciconfig_iobase, long, which,
327		unsigned long, bus, unsigned long, devfn)
328{
329	struct pci_controller* hose;
330	long result = -EOPNOTSUPP;
331
332	hose = pci_bus_to_hose(bus);
333	if (!hose)
334		return -ENODEV;
335
336	switch (which) {
337	case IOBASE_BRIDGE_NUMBER:
338		return (long)hose->first_busno;
339	case IOBASE_MEMORY:
340		return (long)hose->mem_offset[0];
341	case IOBASE_IO:
342		return (long)hose->io_base_phys;
343	case IOBASE_ISA_IO:
344		return (long)isa_io_base;
345	case IOBASE_ISA_MEM:
346		return (long)isa_mem_base;
347	}
348
349	return result;
350}
v3.15
 
  1/*
  2 * Common pmac/prep/chrp pci routines. -- Cort
  3 */
  4
  5#include <linux/kernel.h>
  6#include <linux/pci.h>
  7#include <linux/delay.h>
  8#include <linux/string.h>
  9#include <linux/init.h>
 10#include <linux/capability.h>
 11#include <linux/sched.h>
 12#include <linux/errno.h>
 13#include <linux/bootmem.h>
 
 14#include <linux/irq.h>
 15#include <linux/list.h>
 16#include <linux/of.h>
 17#include <linux/slab.h>
 18#include <linux/export.h>
 19
 20#include <asm/processor.h>
 21#include <asm/io.h>
 22#include <asm/prom.h>
 23#include <asm/sections.h>
 24#include <asm/pci-bridge.h>
 25#include <asm/ppc-pci.h>
 26#include <asm/byteorder.h>
 27#include <asm/uaccess.h>
 28#include <asm/machdep.h>
 29
 30#undef DEBUG
 31
 32unsigned long isa_io_base     = 0;
 33unsigned long pci_dram_offset = 0;
 34int pcibios_assign_bus_offset = 1;
 35
 36void pcibios_make_OF_bus_map(void);
 37
 38static void fixup_cpc710_pci64(struct pci_dev* dev);
 39static u8* pci_to_OF_bus_map;
 40
 41/* By default, we don't re-assign bus numbers. We do this only on
 42 * some pmacs
 43 */
 44static int pci_assign_all_buses;
 45
 46static int pci_bus_count;
 47
 48/* This will remain NULL for now, until isa-bridge.c is made common
 49 * to both 32-bit and 64-bit.
 50 */
 51struct pci_dev *isa_bridge_pcidev;
 52EXPORT_SYMBOL_GPL(isa_bridge_pcidev);
 53
 54static void
 55fixup_cpc710_pci64(struct pci_dev* dev)
 56{
 57	/* Hide the PCI64 BARs from the kernel as their content doesn't
 58	 * fit well in the resource management
 59	 */
 60	dev->resource[0].start = dev->resource[0].end = 0;
 61	dev->resource[0].flags = 0;
 62	dev->resource[1].start = dev->resource[1].end = 0;
 63	dev->resource[1].flags = 0;
 64}
 65DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_IBM,	PCI_DEVICE_ID_IBM_CPC710_PCI64,	fixup_cpc710_pci64);
 66
 
 
 
 
 
 67/*
 68 * Functions below are used on OpenFirmware machines.
 69 */
 70static void
 71make_one_node_map(struct device_node* node, u8 pci_bus)
 72{
 73	const int *bus_range;
 74	int len;
 75
 76	if (pci_bus >= pci_bus_count)
 77		return;
 78	bus_range = of_get_property(node, "bus-range", &len);
 79	if (bus_range == NULL || len < 2 * sizeof(int)) {
 80		printk(KERN_WARNING "Can't get bus-range for %s, "
 81		       "assuming it starts at 0\n", node->full_name);
 82		pci_to_OF_bus_map[pci_bus] = 0;
 83	} else
 84		pci_to_OF_bus_map[pci_bus] = bus_range[0];
 85
 86	for_each_child_of_node(node, node) {
 87		struct pci_dev* dev;
 88		const unsigned int *class_code, *reg;
 89	
 90		class_code = of_get_property(node, "class-code", NULL);
 91		if (!class_code || ((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI &&
 92			(*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS))
 93			continue;
 94		reg = of_get_property(node, "reg", NULL);
 95		if (!reg)
 96			continue;
 97		dev = pci_get_bus_and_slot(pci_bus, ((reg[0] >> 8) & 0xff));
 
 98		if (!dev || !dev->subordinate) {
 99			pci_dev_put(dev);
100			continue;
101		}
102		make_one_node_map(node, dev->subordinate->number);
103		pci_dev_put(dev);
104	}
105}
106	
107void
108pcibios_make_OF_bus_map(void)
109{
110	int i;
111	struct pci_controller *hose, *tmp;
112	struct property *map_prop;
113	struct device_node *dn;
114
115	pci_to_OF_bus_map = kmalloc(pci_bus_count, GFP_KERNEL);
116	if (!pci_to_OF_bus_map) {
117		printk(KERN_ERR "Can't allocate OF bus map !\n");
118		return;
119	}
120
121	/* We fill the bus map with invalid values, that helps
122	 * debugging.
123	 */
124	for (i=0; i<pci_bus_count; i++)
125		pci_to_OF_bus_map[i] = 0xff;
126
127	/* For each hose, we begin searching bridges */
128	list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
129		struct device_node* node = hose->dn;
130
131		if (!node)
132			continue;
133		make_one_node_map(node, hose->first_busno);
134	}
135	dn = of_find_node_by_path("/");
136	map_prop = of_find_property(dn, "pci-OF-bus-map", NULL);
137	if (map_prop) {
138		BUG_ON(pci_bus_count > map_prop->length);
139		memcpy(map_prop->value, pci_to_OF_bus_map, pci_bus_count);
140	}
141	of_node_put(dn);
142#ifdef DEBUG
143	printk("PCI->OF bus map:\n");
144	for (i=0; i<pci_bus_count; i++) {
145		if (pci_to_OF_bus_map[i] == 0xff)
146			continue;
147		printk("%d -> %d\n", i, pci_to_OF_bus_map[i]);
148	}
149#endif
150}
 
151
152
 
153/*
154 * Returns the PCI device matching a given OF node
155 */
156int pci_device_from_OF_node(struct device_node *node, u8 *bus, u8 *devfn)
157{
 
158	struct pci_dev *dev = NULL;
 
159	const __be32 *reg;
160	int size;
161
162	/* Check if it might have a chance to be a PCI device */
163	if (!pci_find_hose_for_OF_device(node))
164		return -ENODEV;
165
166	reg = of_get_property(node, "reg", &size);
167	if (!reg || size < 5 * sizeof(u32))
168		return -ENODEV;
169
170	*bus = (be32_to_cpup(&reg[0]) >> 16) & 0xff;
171	*devfn = (be32_to_cpup(&reg[0]) >> 8) & 0xff;
172
 
 
 
173	/* Ok, here we need some tweak. If we have already renumbered
174	 * all busses, we can't rely on the OF bus number any more.
175	 * the pci_to_OF_bus_map is not enough as several PCI busses
176	 * may match the same OF bus number.
177	 */
178	if (!pci_to_OF_bus_map)
179		return 0;
180
181	for_each_pci_dev(dev)
182		if (pci_to_OF_bus_map[dev->bus->number] == *bus &&
183				dev->devfn == *devfn) {
184			*bus = dev->bus->number;
185			pci_dev_put(dev);
186			return 0;
187		}
188
189	return -ENODEV;
 
190}
191EXPORT_SYMBOL(pci_device_from_OF_node);
 
192
 
193/* We create the "pci-OF-bus-map" property now so it appears in the
194 * /proc device tree
195 */
196void __init
197pci_create_OF_bus_map(void)
198{
199	struct property* of_prop;
200	struct device_node *dn;
201
202	of_prop = (struct property*) alloc_bootmem(sizeof(struct property) + 256);
 
203	if (!of_prop)
204		return;
 
205	dn = of_find_node_by_path("/");
206	if (dn) {
207		memset(of_prop, -1, sizeof(struct property) + 256);
208		of_prop->name = "pci-OF-bus-map";
209		of_prop->length = 256;
210		of_prop->value = &of_prop[1];
211		of_add_property(dn, of_prop);
212		of_node_put(dn);
213	}
214}
 
215
216void pcibios_setup_phb_io_space(struct pci_controller *hose)
217{
218	unsigned long io_offset;
219	struct resource *res = &hose->io_resource;
220
221	/* Fixup IO space offset */
222	io_offset = pcibios_io_space_offset(hose);
223	res->start += io_offset;
224	res->end += io_offset;
225}
226
227static int __init pcibios_init(void)
228{
229	struct pci_controller *hose, *tmp;
 
230	int next_busno = 0;
 
231
232	printk(KERN_INFO "PCI: Probing PCI hardware\n");
233
 
 
 
 
 
 
 
 
 
234	if (pci_has_flag(PCI_REASSIGN_ALL_BUS))
235		pci_assign_all_buses = 1;
236
237	/* Scan all of the recorded PCI controllers.  */
238	list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
 
239		if (pci_assign_all_buses)
240			hose->first_busno = next_busno;
 
241		hose->last_busno = 0xff;
242		pcibios_scan_phb(hose);
243		pci_bus_add_devices(hose->bus);
 
244		if (pci_assign_all_buses || next_busno <= hose->last_busno)
245			next_busno = hose->last_busno + pcibios_assign_bus_offset;
 
246	}
 
 
 
247	pci_bus_count = next_busno;
248
249	/* OpenFirmware based machines need a map of OF bus
250	 * numbers vs. kernel bus numbers since we may have to
251	 * remap them.
252	 */
253	if (pci_assign_all_buses)
254		pcibios_make_OF_bus_map();
 
 
255
256	/* Call common code to handle resource allocation */
257	pcibios_resource_survey();
258
 
 
 
 
259	/* Call machine dependent post-init code */
260	if (ppc_md.pcibios_after_init)
261		ppc_md.pcibios_after_init();
262
263	return 0;
264}
265
266subsys_initcall(pcibios_init);
267
268static struct pci_controller*
269pci_bus_to_hose(int bus)
270{
271	struct pci_controller *hose, *tmp;
272
273	list_for_each_entry_safe(hose, tmp, &hose_list, list_node)
274		if (bus >= hose->first_busno && bus <= hose->last_busno)
275			return hose;
276	return NULL;
277}
278
279/* Provide information on locations of various I/O regions in physical
280 * memory.  Do this on a per-card basis so that we choose the right
281 * root bridge.
282 * Note that the returned IO or memory base is a physical address
283 */
284
285long sys_pciconfig_iobase(long which, unsigned long bus, unsigned long devfn)
 
286{
287	struct pci_controller* hose;
288	long result = -EOPNOTSUPP;
289
290	hose = pci_bus_to_hose(bus);
291	if (!hose)
292		return -ENODEV;
293
294	switch (which) {
295	case IOBASE_BRIDGE_NUMBER:
296		return (long)hose->first_busno;
297	case IOBASE_MEMORY:
298		return (long)hose->mem_offset[0];
299	case IOBASE_IO:
300		return (long)hose->io_base_phys;
301	case IOBASE_ISA_IO:
302		return (long)isa_io_base;
303	case IOBASE_ISA_MEM:
304		return (long)isa_mem_base;
305	}
306
307	return result;
308}
309
310