Loading...
1/* SPDX-License-Identifier: GPL-2.0 */
2#ifndef __HEAD_BOOKE_H__
3#define __HEAD_BOOKE_H__
4
5#include <asm/ptrace.h> /* for STACK_FRAME_REGS_MARKER */
6#include <asm/kvm_asm.h>
7#include <asm/kvm_booke_hv_asm.h>
8#include <asm/thread_info.h> /* for THREAD_SHIFT */
9
10#ifdef __ASSEMBLY__
11
12/*
13 * Macros used for common Book-e exception handling
14 */
15
16#define SET_IVOR(vector_number, vector_label) \
17 li r26,vector_label@l; \
18 mtspr SPRN_IVOR##vector_number,r26; \
19 sync
20
21#if (THREAD_SHIFT < 15)
22#define ALLOC_STACK_FRAME(reg, val) \
23 addi reg,reg,val
24#else
25#define ALLOC_STACK_FRAME(reg, val) \
26 addis reg,reg,val@ha; \
27 addi reg,reg,val@l
28#endif
29
30/*
31 * Macro used to get to thread save registers.
32 * Note that entries 0-3 are used for the prolog code, and the remaining
33 * entries are available for specific exception use in the event a handler
34 * requires more than 4 scratch registers.
35 */
36#define THREAD_NORMSAVE(offset) (THREAD_NORMSAVES + (offset * 4))
37
38#ifdef CONFIG_PPC_E500
39#define BOOKE_CLEAR_BTB(reg) \
40START_BTB_FLUSH_SECTION \
41 BTB_FLUSH(reg) \
42END_BTB_FLUSH_SECTION
43#else
44#define BOOKE_CLEAR_BTB(reg)
45#endif
46
47
48#define NORMAL_EXCEPTION_PROLOG(trapno, intno) \
49 mtspr SPRN_SPRG_WSCRATCH0, r10; /* save one register */ \
50 mfspr r10, SPRN_SPRG_THREAD; \
51 stw r11, THREAD_NORMSAVE(0)(r10); \
52 stw r13, THREAD_NORMSAVE(2)(r10); \
53 mfcr r13; /* save CR in r13 for now */\
54 mfspr r11, SPRN_SRR1; \
55 DO_KVM BOOKE_INTERRUPT_##intno SPRN_SRR1; \
56 andi. r11, r11, MSR_PR; /* check whether user or kernel */\
57 LOAD_REG_IMMEDIATE(r11, MSR_KERNEL); \
58 mtmsr r11; \
59 mr r11, r1; \
60 beq 1f; \
61 BOOKE_CLEAR_BTB(r11) \
62 /* if from user, start at top of this thread's kernel stack */ \
63 lwz r11, TASK_STACK - THREAD(r10); \
64 ALLOC_STACK_FRAME(r11, THREAD_SIZE); \
651 : subi r11, r11, INT_FRAME_SIZE; /* Allocate exception frame */ \
66 stw r13, _CCR(r11); /* save various registers */ \
67 stw r12,GPR12(r11); \
68 stw r9,GPR9(r11); \
69 mfspr r13, SPRN_SPRG_RSCRATCH0; \
70 stw r13, GPR10(r11); \
71 lwz r12, THREAD_NORMSAVE(0)(r10); \
72 stw r12,GPR11(r11); \
73 lwz r13, THREAD_NORMSAVE(2)(r10); /* restore r13 */ \
74 mflr r10; \
75 stw r10,_LINK(r11); \
76 mfspr r12,SPRN_SRR0; \
77 stw r1, GPR1(r11); \
78 mfspr r9,SPRN_SRR1; \
79 stw r1, 0(r11); \
80 mr r1, r11; \
81 rlwinm r9,r9,0,14,12; /* clear MSR_WE (necessary?) */\
82 COMMON_EXCEPTION_PROLOG_END trapno
83
84.macro COMMON_EXCEPTION_PROLOG_END trapno
85 stw r0,GPR0(r1)
86 lis r10, STACK_FRAME_REGS_MARKER@ha /* exception frame marker */
87 addi r10, r10, STACK_FRAME_REGS_MARKER@l
88 stw r10, STACK_INT_FRAME_MARKER(r1)
89 li r10, \trapno
90 stw r10,_TRAP(r1)
91 SAVE_GPRS(3, 8, r1)
92 SAVE_NVGPRS(r1)
93 stw r2,GPR2(r1)
94 stw r12,_NIP(r1)
95 stw r9,_MSR(r1)
96 mfctr r10
97 mfspr r2,SPRN_SPRG_THREAD
98 stw r10,_CTR(r1)
99 tovirt(r2, r2)
100 mfspr r10,SPRN_XER
101 addi r2, r2, -THREAD
102 stw r10,_XER(r1)
103 addi r3,r1,STACK_INT_FRAME_REGS
104.endm
105
106.macro prepare_transfer_to_handler
107#ifdef CONFIG_PPC_E500
108 andi. r12,r9,MSR_PR
109 bne 777f
110 bl prepare_transfer_to_handler
111777:
112#endif
113.endm
114
115.macro SYSCALL_ENTRY trapno intno srr1
116 mfspr r10, SPRN_SPRG_THREAD
117#ifdef CONFIG_KVM_BOOKE_HV
118BEGIN_FTR_SECTION
119 mtspr SPRN_SPRG_WSCRATCH0, r10
120 stw r11, THREAD_NORMSAVE(0)(r10)
121 stw r13, THREAD_NORMSAVE(2)(r10)
122 mfcr r13 /* save CR in r13 for now */
123 mfspr r11, SPRN_SRR1
124 mtocrf 0x80, r11 /* check MSR[GS] without clobbering reg */
125 bf 3, 1975f
126 b kvmppc_handler_\intno\()_\srr1
1271975:
128 mr r12, r13
129 lwz r13, THREAD_NORMSAVE(2)(r10)
130FTR_SECTION_ELSE
131 mfcr r12
132ALT_FTR_SECTION_END_IFSET(CPU_FTR_EMB_HV)
133#else
134 mfcr r12
135#endif
136 mfspr r9, SPRN_SRR1
137 BOOKE_CLEAR_BTB(r11)
138 mr r11, r1
139 lwz r1, TASK_STACK - THREAD(r10)
140 rlwinm r12,r12,0,4,2 /* Clear SO bit in CR */
141 ALLOC_STACK_FRAME(r1, THREAD_SIZE - INT_FRAME_SIZE)
142 stw r12, _CCR(r1)
143 mfspr r12,SPRN_SRR0
144 stw r12,_NIP(r1)
145 b transfer_to_syscall /* jump to handler */
146.endm
147
148/* To handle the additional exception priority levels on 40x and Book-E
149 * processors we allocate a stack per additional priority level.
150 *
151 * On 40x critical is the only additional level
152 * On 44x/e500 we have critical and machine check
153 *
154 * Additionally we reserve a SPRG for each priority level so we can free up a
155 * GPR to use as the base for indirect access to the exception stacks. This
156 * is necessary since the MMU is always on, for Book-E parts, and the stacks
157 * are offset from KERNELBASE.
158 *
159 * There is some space optimization to be had here if desired. However
160 * to allow for a common kernel with support for debug exceptions either
161 * going to critical or their own debug level we aren't currently
162 * providing configurations that micro-optimize space usage.
163 */
164
165#define MC_STACK_BASE mcheckirq_ctx
166#define CRIT_STACK_BASE critirq_ctx
167
168/* only on e500mc */
169#define DBG_STACK_BASE dbgirq_ctx
170
171#ifdef CONFIG_SMP
172#define BOOKE_LOAD_EXC_LEVEL_STACK(level) \
173 mfspr r8,SPRN_PIR; \
174 slwi r8,r8,2; \
175 addis r8,r8,level##_STACK_BASE@ha; \
176 lwz r8,level##_STACK_BASE@l(r8); \
177 addi r8,r8,THREAD_SIZE - INT_FRAME_SIZE;
178#else
179#define BOOKE_LOAD_EXC_LEVEL_STACK(level) \
180 lis r8,level##_STACK_BASE@ha; \
181 lwz r8,level##_STACK_BASE@l(r8); \
182 addi r8,r8,THREAD_SIZE - INT_FRAME_SIZE;
183#endif
184
185/*
186 * Exception prolog for critical/machine check exceptions. This is a
187 * little different from the normal exception prolog above since a
188 * critical/machine check exception can potentially occur at any point
189 * during normal exception processing. Thus we cannot use the same SPRG
190 * registers as the normal prolog above. Instead we use a portion of the
191 * critical/machine check exception stack at low physical addresses.
192 */
193#define EXC_LEVEL_EXCEPTION_PROLOG(exc_level, trapno, intno, exc_level_srr0, exc_level_srr1) \
194 mtspr SPRN_SPRG_WSCRATCH_##exc_level,r8; \
195 BOOKE_LOAD_EXC_LEVEL_STACK(exc_level);/* r8 points to the exc_level stack*/ \
196 stw r9,GPR9(r8); /* save various registers */\
197 mfcr r9; /* save CR in r9 for now */\
198 stw r10,GPR10(r8); \
199 stw r11,GPR11(r8); \
200 stw r9,_CCR(r8); /* save CR on stack */\
201 mfspr r11,exc_level_srr1; /* check whether user or kernel */\
202 DO_KVM BOOKE_INTERRUPT_##intno exc_level_srr1; \
203 BOOKE_CLEAR_BTB(r10) \
204 andi. r11,r11,MSR_PR; \
205 LOAD_REG_IMMEDIATE(r11, MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)); \
206 mtmsr r11; \
207 mfspr r11,SPRN_SPRG_THREAD; /* if from user, start at top of */\
208 lwz r11, TASK_STACK - THREAD(r11); /* this thread's kernel stack */\
209 addi r11,r11,THREAD_SIZE - INT_FRAME_SIZE; /* allocate stack frame */\
210 beq 1f; \
211 /* COMING FROM USER MODE */ \
212 stw r9,_CCR(r11); /* save CR */\
213 lwz r10,GPR10(r8); /* copy regs from exception stack */\
214 lwz r9,GPR9(r8); \
215 stw r10,GPR10(r11); \
216 lwz r10,GPR11(r8); \
217 stw r9,GPR9(r11); \
218 stw r10,GPR11(r11); \
219 b 2f; \
220 /* COMING FROM PRIV MODE */ \
2211: mr r11, r8; \
2222: mfspr r8,SPRN_SPRG_RSCRATCH_##exc_level; \
223 stw r12,GPR12(r11); /* save various registers */\
224 mflr r10; \
225 stw r10,_LINK(r11); \
226 mfspr r12,SPRN_DEAR; /* save DEAR and ESR in the frame */\
227 stw r12,_DEAR(r11); /* since they may have had stuff */\
228 mfspr r9,SPRN_ESR; /* in them at the point where the */\
229 stw r9,_ESR(r11); /* exception was taken */\
230 mfspr r12,exc_level_srr0; \
231 stw r1,GPR1(r11); \
232 mfspr r9,exc_level_srr1; \
233 stw r1,0(r11); \
234 mr r1,r11; \
235 rlwinm r9,r9,0,14,12; /* clear MSR_WE (necessary?) */\
236 COMMON_EXCEPTION_PROLOG_END trapno
237
238#define SAVE_xSRR(xSRR) \
239 mfspr r0,SPRN_##xSRR##0; \
240 stw r0,_##xSRR##0(r1); \
241 mfspr r0,SPRN_##xSRR##1; \
242 stw r0,_##xSRR##1(r1)
243
244
245.macro SAVE_MMU_REGS
246#ifdef CONFIG_PPC_E500
247 mfspr r0,SPRN_MAS0
248 stw r0,MAS0(r1)
249 mfspr r0,SPRN_MAS1
250 stw r0,MAS1(r1)
251 mfspr r0,SPRN_MAS2
252 stw r0,MAS2(r1)
253 mfspr r0,SPRN_MAS3
254 stw r0,MAS3(r1)
255 mfspr r0,SPRN_MAS6
256 stw r0,MAS6(r1)
257#ifdef CONFIG_PHYS_64BIT
258 mfspr r0,SPRN_MAS7
259 stw r0,MAS7(r1)
260#endif /* CONFIG_PHYS_64BIT */
261#endif /* CONFIG_PPC_E500 */
262#ifdef CONFIG_44x
263 mfspr r0,SPRN_MMUCR
264 stw r0,MMUCR(r1)
265#endif
266.endm
267
268#define CRITICAL_EXCEPTION_PROLOG(trapno, intno) \
269 EXC_LEVEL_EXCEPTION_PROLOG(CRIT, trapno+2, intno, SPRN_CSRR0, SPRN_CSRR1)
270#define DEBUG_EXCEPTION_PROLOG(trapno) \
271 EXC_LEVEL_EXCEPTION_PROLOG(DBG, trapno+8, DEBUG, SPRN_DSRR0, SPRN_DSRR1)
272#define MCHECK_EXCEPTION_PROLOG(trapno) \
273 EXC_LEVEL_EXCEPTION_PROLOG(MC, trapno+4, MACHINE_CHECK, \
274 SPRN_MCSRR0, SPRN_MCSRR1)
275
276/*
277 * Guest Doorbell -- this is a bit odd in that uses GSRR0/1 despite
278 * being delivered to the host. This exception can only happen
279 * inside a KVM guest -- so we just handle up to the DO_KVM rather
280 * than try to fit this into one of the existing prolog macros.
281 */
282#define GUEST_DOORBELL_EXCEPTION \
283 START_EXCEPTION(GuestDoorbell); \
284 mtspr SPRN_SPRG_WSCRATCH0, r10; /* save one register */ \
285 mfspr r10, SPRN_SPRG_THREAD; \
286 stw r11, THREAD_NORMSAVE(0)(r10); \
287 mfspr r11, SPRN_SRR1; \
288 stw r13, THREAD_NORMSAVE(2)(r10); \
289 mfcr r13; /* save CR in r13 for now */\
290 DO_KVM BOOKE_INTERRUPT_GUEST_DBELL SPRN_GSRR1; \
291 trap
292
293/*
294 * Exception vectors.
295 */
296#define START_EXCEPTION(label) \
297 .align 5; \
298label:
299
300#define EXCEPTION(n, intno, label, hdlr) \
301 START_EXCEPTION(label); \
302 NORMAL_EXCEPTION_PROLOG(n, intno); \
303 prepare_transfer_to_handler; \
304 bl hdlr; \
305 b interrupt_return
306
307#define CRITICAL_EXCEPTION(n, intno, label, hdlr) \
308 START_EXCEPTION(label); \
309 CRITICAL_EXCEPTION_PROLOG(n, intno); \
310 SAVE_MMU_REGS; \
311 SAVE_xSRR(SRR); \
312 prepare_transfer_to_handler; \
313 bl hdlr; \
314 b ret_from_crit_exc
315
316#define MCHECK_EXCEPTION(n, label, hdlr) \
317 START_EXCEPTION(label); \
318 MCHECK_EXCEPTION_PROLOG(n); \
319 mfspr r5,SPRN_ESR; \
320 stw r5,_ESR(r11); \
321 SAVE_xSRR(DSRR); \
322 SAVE_xSRR(CSRR); \
323 SAVE_MMU_REGS; \
324 SAVE_xSRR(SRR); \
325 prepare_transfer_to_handler; \
326 bl hdlr; \
327 b ret_from_mcheck_exc
328
329/* Check for a single step debug exception while in an exception
330 * handler before state has been saved. This is to catch the case
331 * where an instruction that we are trying to single step causes
332 * an exception (eg ITLB/DTLB miss) and thus the first instruction of
333 * the exception handler generates a single step debug exception.
334 *
335 * If we get a debug trap on the first instruction of an exception handler,
336 * we reset the MSR_DE in the _exception handler's_ MSR (the debug trap is
337 * a critical exception, so we are using SPRN_CSRR1 to manipulate the MSR).
338 * The exception handler was handling a non-critical interrupt, so it will
339 * save (and later restore) the MSR via SPRN_CSRR1, which will still have
340 * the MSR_DE bit set.
341 */
342#define DEBUG_DEBUG_EXCEPTION \
343 START_EXCEPTION(DebugDebug); \
344 DEBUG_EXCEPTION_PROLOG(2000); \
345 \
346 /* \
347 * If there is a single step or branch-taken exception in an \
348 * exception entry sequence, it was probably meant to apply to \
349 * the code where the exception occurred (since exception entry \
350 * doesn't turn off DE automatically). We simulate the effect \
351 * of turning off DE on entry to an exception handler by turning \
352 * off DE in the DSRR1 value and clearing the debug status. \
353 */ \
354 mfspr r10,SPRN_DBSR; /* check single-step/branch taken */ \
355 andis. r10,r10,(DBSR_IC|DBSR_BT)@h; \
356 beq+ 2f; \
357 \
358 lis r10,interrupt_base@h; /* check if exception in vectors */ \
359 ori r10,r10,interrupt_base@l; \
360 cmplw r12,r10; \
361 blt+ 2f; /* addr below exception vectors */ \
362 \
363 lis r10,interrupt_end@h; \
364 ori r10,r10,interrupt_end@l; \
365 cmplw r12,r10; \
366 bgt+ 2f; /* addr above exception vectors */ \
367 \
368 /* here it looks like we got an inappropriate debug exception. */ \
3691: rlwinm r9,r9,0,~MSR_DE; /* clear DE in the CDRR1 value */ \
370 lis r10,(DBSR_IC|DBSR_BT)@h; /* clear the IC event */ \
371 mtspr SPRN_DBSR,r10; \
372 /* restore state and get out */ \
373 lwz r10,_CCR(r11); \
374 lwz r0,GPR0(r11); \
375 lwz r1,GPR1(r11); \
376 mtcrf 0x80,r10; \
377 mtspr SPRN_DSRR0,r12; \
378 mtspr SPRN_DSRR1,r9; \
379 lwz r9,GPR9(r11); \
380 lwz r12,GPR12(r11); \
381 mtspr SPRN_SPRG_WSCRATCH_DBG,r8; \
382 BOOKE_LOAD_EXC_LEVEL_STACK(DBG); /* r8 points to the debug stack */ \
383 lwz r10,GPR10(r8); \
384 lwz r11,GPR11(r8); \
385 mfspr r8,SPRN_SPRG_RSCRATCH_DBG; \
386 \
387 PPC_RFDI; \
388 b .; \
389 \
390 /* continue normal handling for a debug exception... */ \
3912: mfspr r4,SPRN_DBSR; \
392 stw r4,_ESR(r11); /* DebugException takes DBSR in _ESR */\
393 SAVE_xSRR(CSRR); \
394 SAVE_MMU_REGS; \
395 SAVE_xSRR(SRR); \
396 prepare_transfer_to_handler; \
397 bl DebugException; \
398 b ret_from_debug_exc
399
400#define DEBUG_CRIT_EXCEPTION \
401 START_EXCEPTION(DebugCrit); \
402 CRITICAL_EXCEPTION_PROLOG(2000,DEBUG); \
403 \
404 /* \
405 * If there is a single step or branch-taken exception in an \
406 * exception entry sequence, it was probably meant to apply to \
407 * the code where the exception occurred (since exception entry \
408 * doesn't turn off DE automatically). We simulate the effect \
409 * of turning off DE on entry to an exception handler by turning \
410 * off DE in the CSRR1 value and clearing the debug status. \
411 */ \
412 mfspr r10,SPRN_DBSR; /* check single-step/branch taken */ \
413 andis. r10,r10,(DBSR_IC|DBSR_BT)@h; \
414 beq+ 2f; \
415 \
416 lis r10,interrupt_base@h; /* check if exception in vectors */ \
417 ori r10,r10,interrupt_base@l; \
418 cmplw r12,r10; \
419 blt+ 2f; /* addr below exception vectors */ \
420 \
421 lis r10,interrupt_end@h; \
422 ori r10,r10,interrupt_end@l; \
423 cmplw r12,r10; \
424 bgt+ 2f; /* addr above exception vectors */ \
425 \
426 /* here it looks like we got an inappropriate debug exception. */ \
4271: rlwinm r9,r9,0,~MSR_DE; /* clear DE in the CSRR1 value */ \
428 lis r10,(DBSR_IC|DBSR_BT)@h; /* clear the IC event */ \
429 mtspr SPRN_DBSR,r10; \
430 /* restore state and get out */ \
431 lwz r10,_CCR(r11); \
432 lwz r0,GPR0(r11); \
433 lwz r1,GPR1(r11); \
434 mtcrf 0x80,r10; \
435 mtspr SPRN_CSRR0,r12; \
436 mtspr SPRN_CSRR1,r9; \
437 lwz r9,GPR9(r11); \
438 lwz r12,GPR12(r11); \
439 mtspr SPRN_SPRG_WSCRATCH_CRIT,r8; \
440 BOOKE_LOAD_EXC_LEVEL_STACK(CRIT); /* r8 points to the debug stack */ \
441 lwz r10,GPR10(r8); \
442 lwz r11,GPR11(r8); \
443 mfspr r8,SPRN_SPRG_RSCRATCH_CRIT; \
444 \
445 rfci; \
446 b .; \
447 \
448 /* continue normal handling for a critical exception... */ \
4492: mfspr r4,SPRN_DBSR; \
450 stw r4,_ESR(r11); /* DebugException takes DBSR in _ESR */\
451 SAVE_MMU_REGS; \
452 SAVE_xSRR(SRR); \
453 prepare_transfer_to_handler; \
454 bl DebugException; \
455 b ret_from_crit_exc
456
457#define DATA_STORAGE_EXCEPTION \
458 START_EXCEPTION(DataStorage) \
459 NORMAL_EXCEPTION_PROLOG(0x300, DATA_STORAGE); \
460 mfspr r5,SPRN_ESR; /* Grab the ESR and save it */ \
461 stw r5,_ESR(r11); \
462 mfspr r4,SPRN_DEAR; /* Grab the DEAR */ \
463 stw r4, _DEAR(r11); \
464 prepare_transfer_to_handler; \
465 bl do_page_fault; \
466 b interrupt_return
467
468/*
469 * Instruction TLB Error interrupt handlers may call InstructionStorage
470 * directly without clearing ESR, so the ESR at this point may be left over
471 * from a prior interrupt.
472 *
473 * In any case, do_page_fault for BOOK3E does not use ESR and always expects
474 * dsisr to be 0. ESR_DST from a prior store in particular would confuse fault
475 * handling.
476 */
477#define INSTRUCTION_STORAGE_EXCEPTION \
478 START_EXCEPTION(InstructionStorage) \
479 NORMAL_EXCEPTION_PROLOG(0x400, INST_STORAGE); \
480 li r5,0; /* Store 0 in regs->esr (dsisr) */ \
481 stw r5,_ESR(r11); \
482 stw r12, _DEAR(r11); /* Set regs->dear (dar) to SRR0 */ \
483 prepare_transfer_to_handler; \
484 bl do_page_fault; \
485 b interrupt_return
486
487#define ALIGNMENT_EXCEPTION \
488 START_EXCEPTION(Alignment) \
489 NORMAL_EXCEPTION_PROLOG(0x600, ALIGNMENT); \
490 mfspr r4,SPRN_DEAR; /* Grab the DEAR and save it */ \
491 stw r4,_DEAR(r11); \
492 prepare_transfer_to_handler; \
493 bl alignment_exception; \
494 REST_NVGPRS(r1); \
495 b interrupt_return
496
497#define PROGRAM_EXCEPTION \
498 START_EXCEPTION(Program) \
499 NORMAL_EXCEPTION_PROLOG(0x700, PROGRAM); \
500 mfspr r4,SPRN_ESR; /* Grab the ESR and save it */ \
501 stw r4,_ESR(r11); \
502 prepare_transfer_to_handler; \
503 bl program_check_exception; \
504 REST_NVGPRS(r1); \
505 b interrupt_return
506
507#define DECREMENTER_EXCEPTION \
508 START_EXCEPTION(Decrementer) \
509 NORMAL_EXCEPTION_PROLOG(0x900, DECREMENTER); \
510 lis r0,TSR_DIS@h; /* Setup the DEC interrupt mask */ \
511 mtspr SPRN_TSR,r0; /* Clear the DEC interrupt */ \
512 prepare_transfer_to_handler; \
513 bl timer_interrupt; \
514 b interrupt_return
515
516#define FP_UNAVAILABLE_EXCEPTION \
517 START_EXCEPTION(FloatingPointUnavailable) \
518 NORMAL_EXCEPTION_PROLOG(0x800, FP_UNAVAIL); \
519 beq 1f; \
520 bl load_up_fpu; /* if from user, just load it up */ \
521 b fast_exception_return; \
5221: prepare_transfer_to_handler; \
523 bl kernel_fp_unavailable_exception; \
524 b interrupt_return
525
526#endif /* __ASSEMBLY__ */
527#endif /* __HEAD_BOOKE_H__ */
1#ifndef __HEAD_BOOKE_H__
2#define __HEAD_BOOKE_H__
3
4#include <asm/ptrace.h> /* for STACK_FRAME_REGS_MARKER */
5#include <asm/kvm_asm.h>
6#include <asm/kvm_booke_hv_asm.h>
7
8/*
9 * Macros used for common Book-e exception handling
10 */
11
12#define SET_IVOR(vector_number, vector_label) \
13 li r26,vector_label@l; \
14 mtspr SPRN_IVOR##vector_number,r26; \
15 sync
16
17#if (THREAD_SHIFT < 15)
18#define ALLOC_STACK_FRAME(reg, val) \
19 addi reg,reg,val
20#else
21#define ALLOC_STACK_FRAME(reg, val) \
22 addis reg,reg,val@ha; \
23 addi reg,reg,val@l
24#endif
25
26/*
27 * Macro used to get to thread save registers.
28 * Note that entries 0-3 are used for the prolog code, and the remaining
29 * entries are available for specific exception use in the event a handler
30 * requires more than 4 scratch registers.
31 */
32#define THREAD_NORMSAVE(offset) (THREAD_NORMSAVES + (offset * 4))
33
34#define NORMAL_EXCEPTION_PROLOG(intno) \
35 mtspr SPRN_SPRG_WSCRATCH0, r10; /* save one register */ \
36 mfspr r10, SPRN_SPRG_THREAD; \
37 stw r11, THREAD_NORMSAVE(0)(r10); \
38 stw r13, THREAD_NORMSAVE(2)(r10); \
39 mfcr r13; /* save CR in r13 for now */\
40 mfspr r11, SPRN_SRR1; \
41 DO_KVM BOOKE_INTERRUPT_##intno SPRN_SRR1; \
42 andi. r11, r11, MSR_PR; /* check whether user or kernel */\
43 mr r11, r1; \
44 beq 1f; \
45 /* if from user, start at top of this thread's kernel stack */ \
46 lwz r11, THREAD_INFO-THREAD(r10); \
47 ALLOC_STACK_FRAME(r11, THREAD_SIZE); \
481 : subi r11, r11, INT_FRAME_SIZE; /* Allocate exception frame */ \
49 stw r13, _CCR(r11); /* save various registers */ \
50 stw r12,GPR12(r11); \
51 stw r9,GPR9(r11); \
52 mfspr r13, SPRN_SPRG_RSCRATCH0; \
53 stw r13, GPR10(r11); \
54 lwz r12, THREAD_NORMSAVE(0)(r10); \
55 stw r12,GPR11(r11); \
56 lwz r13, THREAD_NORMSAVE(2)(r10); /* restore r13 */ \
57 mflr r10; \
58 stw r10,_LINK(r11); \
59 mfspr r12,SPRN_SRR0; \
60 stw r1, GPR1(r11); \
61 mfspr r9,SPRN_SRR1; \
62 stw r1, 0(r11); \
63 mr r1, r11; \
64 rlwinm r9,r9,0,14,12; /* clear MSR_WE (necessary?) */\
65 stw r0,GPR0(r11); \
66 lis r10, STACK_FRAME_REGS_MARKER@ha;/* exception frame marker */ \
67 addi r10, r10, STACK_FRAME_REGS_MARKER@l; \
68 stw r10, 8(r11); \
69 SAVE_4GPRS(3, r11); \
70 SAVE_2GPRS(7, r11)
71
72/* To handle the additional exception priority levels on 40x and Book-E
73 * processors we allocate a stack per additional priority level.
74 *
75 * On 40x critical is the only additional level
76 * On 44x/e500 we have critical and machine check
77 * On e200 we have critical and debug (machine check occurs via critical)
78 *
79 * Additionally we reserve a SPRG for each priority level so we can free up a
80 * GPR to use as the base for indirect access to the exception stacks. This
81 * is necessary since the MMU is always on, for Book-E parts, and the stacks
82 * are offset from KERNELBASE.
83 *
84 * There is some space optimization to be had here if desired. However
85 * to allow for a common kernel with support for debug exceptions either
86 * going to critical or their own debug level we aren't currently
87 * providing configurations that micro-optimize space usage.
88 */
89
90#define MC_STACK_BASE mcheckirq_ctx
91#define CRIT_STACK_BASE critirq_ctx
92
93/* only on e500mc/e200 */
94#define DBG_STACK_BASE dbgirq_ctx
95
96#define EXC_LVL_FRAME_OVERHEAD (THREAD_SIZE - INT_FRAME_SIZE - EXC_LVL_SIZE)
97
98#ifdef CONFIG_SMP
99#define BOOKE_LOAD_EXC_LEVEL_STACK(level) \
100 mfspr r8,SPRN_PIR; \
101 slwi r8,r8,2; \
102 addis r8,r8,level##_STACK_BASE@ha; \
103 lwz r8,level##_STACK_BASE@l(r8); \
104 addi r8,r8,EXC_LVL_FRAME_OVERHEAD;
105#else
106#define BOOKE_LOAD_EXC_LEVEL_STACK(level) \
107 lis r8,level##_STACK_BASE@ha; \
108 lwz r8,level##_STACK_BASE@l(r8); \
109 addi r8,r8,EXC_LVL_FRAME_OVERHEAD;
110#endif
111
112/*
113 * Exception prolog for critical/machine check exceptions. This is a
114 * little different from the normal exception prolog above since a
115 * critical/machine check exception can potentially occur at any point
116 * during normal exception processing. Thus we cannot use the same SPRG
117 * registers as the normal prolog above. Instead we use a portion of the
118 * critical/machine check exception stack at low physical addresses.
119 */
120#define EXC_LEVEL_EXCEPTION_PROLOG(exc_level, intno, exc_level_srr0, exc_level_srr1) \
121 mtspr SPRN_SPRG_WSCRATCH_##exc_level,r8; \
122 BOOKE_LOAD_EXC_LEVEL_STACK(exc_level);/* r8 points to the exc_level stack*/ \
123 stw r9,GPR9(r8); /* save various registers */\
124 mfcr r9; /* save CR in r9 for now */\
125 stw r10,GPR10(r8); \
126 stw r11,GPR11(r8); \
127 stw r9,_CCR(r8); /* save CR on stack */\
128 mfspr r11,exc_level_srr1; /* check whether user or kernel */\
129 DO_KVM BOOKE_INTERRUPT_##intno exc_level_srr1; \
130 andi. r11,r11,MSR_PR; \
131 mfspr r11,SPRN_SPRG_THREAD; /* if from user, start at top of */\
132 lwz r11,THREAD_INFO-THREAD(r11); /* this thread's kernel stack */\
133 addi r11,r11,EXC_LVL_FRAME_OVERHEAD; /* allocate stack frame */\
134 beq 1f; \
135 /* COMING FROM USER MODE */ \
136 stw r9,_CCR(r11); /* save CR */\
137 lwz r10,GPR10(r8); /* copy regs from exception stack */\
138 lwz r9,GPR9(r8); \
139 stw r10,GPR10(r11); \
140 lwz r10,GPR11(r8); \
141 stw r9,GPR9(r11); \
142 stw r10,GPR11(r11); \
143 b 2f; \
144 /* COMING FROM PRIV MODE */ \
1451: lwz r9,TI_FLAGS-EXC_LVL_FRAME_OVERHEAD(r11); \
146 lwz r10,TI_PREEMPT-EXC_LVL_FRAME_OVERHEAD(r11); \
147 stw r9,TI_FLAGS-EXC_LVL_FRAME_OVERHEAD(r8); \
148 stw r10,TI_PREEMPT-EXC_LVL_FRAME_OVERHEAD(r8); \
149 lwz r9,TI_TASK-EXC_LVL_FRAME_OVERHEAD(r11); \
150 stw r9,TI_TASK-EXC_LVL_FRAME_OVERHEAD(r8); \
151 mr r11,r8; \
1522: mfspr r8,SPRN_SPRG_RSCRATCH_##exc_level; \
153 stw r12,GPR12(r11); /* save various registers */\
154 mflr r10; \
155 stw r10,_LINK(r11); \
156 mfspr r12,SPRN_DEAR; /* save DEAR and ESR in the frame */\
157 stw r12,_DEAR(r11); /* since they may have had stuff */\
158 mfspr r9,SPRN_ESR; /* in them at the point where the */\
159 stw r9,_ESR(r11); /* exception was taken */\
160 mfspr r12,exc_level_srr0; \
161 stw r1,GPR1(r11); \
162 mfspr r9,exc_level_srr1; \
163 stw r1,0(r11); \
164 mr r1,r11; \
165 rlwinm r9,r9,0,14,12; /* clear MSR_WE (necessary?) */\
166 stw r0,GPR0(r11); \
167 SAVE_4GPRS(3, r11); \
168 SAVE_2GPRS(7, r11)
169
170#define CRITICAL_EXCEPTION_PROLOG(intno) \
171 EXC_LEVEL_EXCEPTION_PROLOG(CRIT, intno, SPRN_CSRR0, SPRN_CSRR1)
172#define DEBUG_EXCEPTION_PROLOG \
173 EXC_LEVEL_EXCEPTION_PROLOG(DBG, DEBUG, SPRN_DSRR0, SPRN_DSRR1)
174#define MCHECK_EXCEPTION_PROLOG \
175 EXC_LEVEL_EXCEPTION_PROLOG(MC, MACHINE_CHECK, \
176 SPRN_MCSRR0, SPRN_MCSRR1)
177
178/*
179 * Guest Doorbell -- this is a bit odd in that uses GSRR0/1 despite
180 * being delivered to the host. This exception can only happen
181 * inside a KVM guest -- so we just handle up to the DO_KVM rather
182 * than try to fit this into one of the existing prolog macros.
183 */
184#define GUEST_DOORBELL_EXCEPTION \
185 START_EXCEPTION(GuestDoorbell); \
186 mtspr SPRN_SPRG_WSCRATCH0, r10; /* save one register */ \
187 mfspr r10, SPRN_SPRG_THREAD; \
188 stw r11, THREAD_NORMSAVE(0)(r10); \
189 mfspr r11, SPRN_SRR1; \
190 stw r13, THREAD_NORMSAVE(2)(r10); \
191 mfcr r13; /* save CR in r13 for now */\
192 DO_KVM BOOKE_INTERRUPT_GUEST_DBELL SPRN_GSRR1; \
193 trap
194
195/*
196 * Exception vectors.
197 */
198#define START_EXCEPTION(label) \
199 .align 5; \
200label:
201
202#define EXCEPTION(n, intno, label, hdlr, xfer) \
203 START_EXCEPTION(label); \
204 NORMAL_EXCEPTION_PROLOG(intno); \
205 addi r3,r1,STACK_FRAME_OVERHEAD; \
206 xfer(n, hdlr)
207
208#define CRITICAL_EXCEPTION(n, intno, label, hdlr) \
209 START_EXCEPTION(label); \
210 CRITICAL_EXCEPTION_PROLOG(intno); \
211 addi r3,r1,STACK_FRAME_OVERHEAD; \
212 EXC_XFER_TEMPLATE(hdlr, n+2, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \
213 NOCOPY, crit_transfer_to_handler, \
214 ret_from_crit_exc)
215
216#define MCHECK_EXCEPTION(n, label, hdlr) \
217 START_EXCEPTION(label); \
218 MCHECK_EXCEPTION_PROLOG; \
219 mfspr r5,SPRN_ESR; \
220 stw r5,_ESR(r11); \
221 addi r3,r1,STACK_FRAME_OVERHEAD; \
222 EXC_XFER_TEMPLATE(hdlr, n+4, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \
223 NOCOPY, mcheck_transfer_to_handler, \
224 ret_from_mcheck_exc)
225
226#define EXC_XFER_TEMPLATE(hdlr, trap, msr, copyee, tfer, ret) \
227 li r10,trap; \
228 stw r10,_TRAP(r11); \
229 lis r10,msr@h; \
230 ori r10,r10,msr@l; \
231 copyee(r10, r9); \
232 bl tfer; \
233 .long hdlr; \
234 .long ret
235
236#define COPY_EE(d, s) rlwimi d,s,0,16,16
237#define NOCOPY(d, s)
238
239#define EXC_XFER_STD(n, hdlr) \
240 EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, NOCOPY, transfer_to_handler_full, \
241 ret_from_except_full)
242
243#define EXC_XFER_LITE(n, hdlr) \
244 EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, NOCOPY, transfer_to_handler, \
245 ret_from_except)
246
247#define EXC_XFER_EE(n, hdlr) \
248 EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, COPY_EE, transfer_to_handler_full, \
249 ret_from_except_full)
250
251#define EXC_XFER_EE_LITE(n, hdlr) \
252 EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, COPY_EE, transfer_to_handler, \
253 ret_from_except)
254
255/* Check for a single step debug exception while in an exception
256 * handler before state has been saved. This is to catch the case
257 * where an instruction that we are trying to single step causes
258 * an exception (eg ITLB/DTLB miss) and thus the first instruction of
259 * the exception handler generates a single step debug exception.
260 *
261 * If we get a debug trap on the first instruction of an exception handler,
262 * we reset the MSR_DE in the _exception handler's_ MSR (the debug trap is
263 * a critical exception, so we are using SPRN_CSRR1 to manipulate the MSR).
264 * The exception handler was handling a non-critical interrupt, so it will
265 * save (and later restore) the MSR via SPRN_CSRR1, which will still have
266 * the MSR_DE bit set.
267 */
268#define DEBUG_DEBUG_EXCEPTION \
269 START_EXCEPTION(DebugDebug); \
270 DEBUG_EXCEPTION_PROLOG; \
271 \
272 /* \
273 * If there is a single step or branch-taken exception in an \
274 * exception entry sequence, it was probably meant to apply to \
275 * the code where the exception occurred (since exception entry \
276 * doesn't turn off DE automatically). We simulate the effect \
277 * of turning off DE on entry to an exception handler by turning \
278 * off DE in the DSRR1 value and clearing the debug status. \
279 */ \
280 mfspr r10,SPRN_DBSR; /* check single-step/branch taken */ \
281 andis. r10,r10,(DBSR_IC|DBSR_BT)@h; \
282 beq+ 2f; \
283 \
284 lis r10,interrupt_base@h; /* check if exception in vectors */ \
285 ori r10,r10,interrupt_base@l; \
286 cmplw r12,r10; \
287 blt+ 2f; /* addr below exception vectors */ \
288 \
289 lis r10,interrupt_end@h; \
290 ori r10,r10,interrupt_end@l; \
291 cmplw r12,r10; \
292 bgt+ 2f; /* addr above exception vectors */ \
293 \
294 /* here it looks like we got an inappropriate debug exception. */ \
2951: rlwinm r9,r9,0,~MSR_DE; /* clear DE in the CDRR1 value */ \
296 lis r10,(DBSR_IC|DBSR_BT)@h; /* clear the IC event */ \
297 mtspr SPRN_DBSR,r10; \
298 /* restore state and get out */ \
299 lwz r10,_CCR(r11); \
300 lwz r0,GPR0(r11); \
301 lwz r1,GPR1(r11); \
302 mtcrf 0x80,r10; \
303 mtspr SPRN_DSRR0,r12; \
304 mtspr SPRN_DSRR1,r9; \
305 lwz r9,GPR9(r11); \
306 lwz r12,GPR12(r11); \
307 mtspr SPRN_SPRG_WSCRATCH_DBG,r8; \
308 BOOKE_LOAD_EXC_LEVEL_STACK(DBG); /* r8 points to the debug stack */ \
309 lwz r10,GPR10(r8); \
310 lwz r11,GPR11(r8); \
311 mfspr r8,SPRN_SPRG_RSCRATCH_DBG; \
312 \
313 PPC_RFDI; \
314 b .; \
315 \
316 /* continue normal handling for a debug exception... */ \
3172: mfspr r4,SPRN_DBSR; \
318 addi r3,r1,STACK_FRAME_OVERHEAD; \
319 EXC_XFER_TEMPLATE(DebugException, 0x2008, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), NOCOPY, debug_transfer_to_handler, ret_from_debug_exc)
320
321#define DEBUG_CRIT_EXCEPTION \
322 START_EXCEPTION(DebugCrit); \
323 CRITICAL_EXCEPTION_PROLOG(DEBUG); \
324 \
325 /* \
326 * If there is a single step or branch-taken exception in an \
327 * exception entry sequence, it was probably meant to apply to \
328 * the code where the exception occurred (since exception entry \
329 * doesn't turn off DE automatically). We simulate the effect \
330 * of turning off DE on entry to an exception handler by turning \
331 * off DE in the CSRR1 value and clearing the debug status. \
332 */ \
333 mfspr r10,SPRN_DBSR; /* check single-step/branch taken */ \
334 andis. r10,r10,(DBSR_IC|DBSR_BT)@h; \
335 beq+ 2f; \
336 \
337 lis r10,interrupt_base@h; /* check if exception in vectors */ \
338 ori r10,r10,interrupt_base@l; \
339 cmplw r12,r10; \
340 blt+ 2f; /* addr below exception vectors */ \
341 \
342 lis r10,interrupt_end@h; \
343 ori r10,r10,interrupt_end@l; \
344 cmplw r12,r10; \
345 bgt+ 2f; /* addr above exception vectors */ \
346 \
347 /* here it looks like we got an inappropriate debug exception. */ \
3481: rlwinm r9,r9,0,~MSR_DE; /* clear DE in the CSRR1 value */ \
349 lis r10,(DBSR_IC|DBSR_BT)@h; /* clear the IC event */ \
350 mtspr SPRN_DBSR,r10; \
351 /* restore state and get out */ \
352 lwz r10,_CCR(r11); \
353 lwz r0,GPR0(r11); \
354 lwz r1,GPR1(r11); \
355 mtcrf 0x80,r10; \
356 mtspr SPRN_CSRR0,r12; \
357 mtspr SPRN_CSRR1,r9; \
358 lwz r9,GPR9(r11); \
359 lwz r12,GPR12(r11); \
360 mtspr SPRN_SPRG_WSCRATCH_CRIT,r8; \
361 BOOKE_LOAD_EXC_LEVEL_STACK(CRIT); /* r8 points to the debug stack */ \
362 lwz r10,GPR10(r8); \
363 lwz r11,GPR11(r8); \
364 mfspr r8,SPRN_SPRG_RSCRATCH_CRIT; \
365 \
366 rfci; \
367 b .; \
368 \
369 /* continue normal handling for a critical exception... */ \
3702: mfspr r4,SPRN_DBSR; \
371 addi r3,r1,STACK_FRAME_OVERHEAD; \
372 EXC_XFER_TEMPLATE(DebugException, 0x2002, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), NOCOPY, crit_transfer_to_handler, ret_from_crit_exc)
373
374#define DATA_STORAGE_EXCEPTION \
375 START_EXCEPTION(DataStorage) \
376 NORMAL_EXCEPTION_PROLOG(DATA_STORAGE); \
377 mfspr r5,SPRN_ESR; /* Grab the ESR and save it */ \
378 stw r5,_ESR(r11); \
379 mfspr r4,SPRN_DEAR; /* Grab the DEAR */ \
380 EXC_XFER_LITE(0x0300, handle_page_fault)
381
382#define INSTRUCTION_STORAGE_EXCEPTION \
383 START_EXCEPTION(InstructionStorage) \
384 NORMAL_EXCEPTION_PROLOG(INST_STORAGE); \
385 mfspr r5,SPRN_ESR; /* Grab the ESR and save it */ \
386 stw r5,_ESR(r11); \
387 mr r4,r12; /* Pass SRR0 as arg2 */ \
388 li r5,0; /* Pass zero as arg3 */ \
389 EXC_XFER_LITE(0x0400, handle_page_fault)
390
391#define ALIGNMENT_EXCEPTION \
392 START_EXCEPTION(Alignment) \
393 NORMAL_EXCEPTION_PROLOG(ALIGNMENT); \
394 mfspr r4,SPRN_DEAR; /* Grab the DEAR and save it */ \
395 stw r4,_DEAR(r11); \
396 addi r3,r1,STACK_FRAME_OVERHEAD; \
397 EXC_XFER_EE(0x0600, alignment_exception)
398
399#define PROGRAM_EXCEPTION \
400 START_EXCEPTION(Program) \
401 NORMAL_EXCEPTION_PROLOG(PROGRAM); \
402 mfspr r4,SPRN_ESR; /* Grab the ESR and save it */ \
403 stw r4,_ESR(r11); \
404 addi r3,r1,STACK_FRAME_OVERHEAD; \
405 EXC_XFER_STD(0x0700, program_check_exception)
406
407#define DECREMENTER_EXCEPTION \
408 START_EXCEPTION(Decrementer) \
409 NORMAL_EXCEPTION_PROLOG(DECREMENTER); \
410 lis r0,TSR_DIS@h; /* Setup the DEC interrupt mask */ \
411 mtspr SPRN_TSR,r0; /* Clear the DEC interrupt */ \
412 addi r3,r1,STACK_FRAME_OVERHEAD; \
413 EXC_XFER_LITE(0x0900, timer_interrupt)
414
415#define FP_UNAVAILABLE_EXCEPTION \
416 START_EXCEPTION(FloatingPointUnavailable) \
417 NORMAL_EXCEPTION_PROLOG(FP_UNAVAIL); \
418 beq 1f; \
419 bl load_up_fpu; /* if from user, just load it up */ \
420 b fast_exception_return; \
4211: addi r3,r1,STACK_FRAME_OVERHEAD; \
422 EXC_XFER_EE_LITE(0x800, kernel_fp_unavailable_exception)
423
424#ifndef __ASSEMBLY__
425struct exception_regs {
426 unsigned long mas0;
427 unsigned long mas1;
428 unsigned long mas2;
429 unsigned long mas3;
430 unsigned long mas6;
431 unsigned long mas7;
432 unsigned long srr0;
433 unsigned long srr1;
434 unsigned long csrr0;
435 unsigned long csrr1;
436 unsigned long dsrr0;
437 unsigned long dsrr1;
438 unsigned long saved_ksp_limit;
439};
440
441/* ensure this structure is always sized to a multiple of the stack alignment */
442#define STACK_EXC_LVL_FRAME_SIZE _ALIGN_UP(sizeof (struct exception_regs), 16)
443
444#endif /* __ASSEMBLY__ */
445#endif /* __HEAD_BOOKE_H__ */