Linux Audio

Check our new training course

Yocto / OpenEmbedded training

Feb 10-13, 2025
Register
Loading...
Note: File does not exist in v6.8.
  1/*
  2 * P1024 RDB Device Tree Source stub (no addresses or top-level ranges)
  3 *
  4 * Copyright 2012 Freescale Semiconductor Inc.
  5 *
  6 * Redistribution and use in source and binary forms, with or without
  7 * modification, are permitted provided that the following conditions are met:
  8 *     * Redistributions of source code must retain the above copyright
  9 *       notice, this list of conditions and the following disclaimer.
 10 *     * Redistributions in binary form must reproduce the above copyright
 11 *       notice, this list of conditions and the following disclaimer in the
 12 *       documentation and/or other materials provided with the distribution.
 13 *     * Neither the name of Freescale Semiconductor nor the
 14 *       names of its contributors may be used to endorse or promote products
 15 *       derived from this software without specific prior written permission.
 16 *
 17 *
 18 * ALTERNATIVELY, this software may be distributed under the terms of the
 19 * GNU General Public License ("GPL") as published by the Free Software
 20 * Foundation, either version 2 of that License or (at your option) any
 21 * later version.
 22 *
 23 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
 24 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
 25 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 26 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
 27 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
 28 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 29 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
 30 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 32 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 33 */
 34
 35&lbc {
 36	nor@0,0 {
 37		#address-cells = <1>;
 38		#size-cells = <1>;
 39		compatible = "cfi-flash";
 40		reg = <0x0 0x0 0x1000000>;
 41		bank-width = <2>;
 42		device-width = <1>;
 43
 44		partition@0 {
 45			/* This location must not be altered  */
 46			/* 256KB for Vitesse 7385 Switch firmware */
 47			reg = <0x0 0x00040000>;
 48			label = "NOR Vitesse-7385 Firmware";
 49			read-only;
 50		};
 51
 52		partition@40000 {
 53			/* 256KB for DTB Image */
 54			reg = <0x00040000 0x00040000>;
 55			label = "NOR DTB Image";
 56		};
 57
 58		partition@80000 {
 59			/* 3.5 MB for Linux Kernel Image */
 60			reg = <0x00080000 0x00380000>;
 61			label = "NOR Linux Kernel Image";
 62		};
 63
 64		partition@400000 {
 65			/* 11MB for JFFS2 based Root file System */
 66			reg = <0x00400000 0x00b00000>;
 67			label = "NOR JFFS2 Root File System";
 68		};
 69
 70		partition@f00000 {
 71			/* This location must not be altered  */
 72			/* 512KB for u-boot Bootloader Image */
 73			/* 512KB for u-boot Environment Variables */
 74			reg = <0x00f00000 0x00100000>;
 75			label = "NOR U-Boot Image";
 76			read-only;
 77		};
 78	};
 79
 80	nand@1,0 {
 81		#address-cells = <1>;
 82		#size-cells = <1>;
 83		compatible = "fsl,p1020-fcm-nand",
 84				 "fsl,elbc-fcm-nand";
 85		reg = <0x1 0x0 0x40000>;
 86
 87		partition@0 {
 88			/* This location must not be altered  */
 89			/* 1MB for u-boot Bootloader Image */
 90			reg = <0x0 0x00100000>;
 91			label = "NAND U-Boot Image";
 92			read-only;
 93		};
 94
 95		partition@100000 {
 96			/* 1MB for DTB Image */
 97			reg = <0x00100000 0x00100000>;
 98			label = "NAND DTB Image";
 99		};
100
101		partition@200000 {
102			/* 4MB for Linux Kernel Image */
103			reg = <0x00200000 0x00400000>;
104			label = "NAND Linux Kernel Image";
105		};
106
107		partition@600000 {
108			/* 4MB for Compressed Root file System Image */
109			reg = <0x00600000 0x00400000>;
110			label = "NAND Compressed RFS Image";
111		};
112
113		partition@a00000 {
114			/* 15MB for JFFS2 based Root file System */
115			reg = <0x00a00000 0x00f00000>;
116			label = "NAND JFFS2 Root File System";
117		};
118
119		partition@1900000 {
120			/* 7MB for User Writable Area */
121			reg = <0x01900000 0x00700000>;
122			label = "NAND Writable User area";
123		};
124	};
125};
126
127&soc {
128	spi@7000 {
129		flash@0 {
130			#address-cells = <1>;
131			#size-cells = <1>;
132			compatible = "spansion,m25p80";
133			reg = <0>;
134			spi-max-frequency = <40000000>;
135
136			partition@0 {
137				/* 512KB for u-boot Bootloader Image */
138				reg = <0x0 0x00080000>;
139				label = "SPI U-Boot Image";
140				read-only;
141			};
142
143			partition@80000 {
144				/* 512KB for DTB Image */
145				reg = <0x00080000 0x00080000>;
146				label = "SPI DTB Image";
147			};
148
149			partition@100000 {
150				/* 4MB for Linux Kernel Image */
151				reg = <0x00100000 0x00400000>;
152				label = "SPI Linux Kernel Image";
153			};
154
155			partition@500000 {
156				/* 4MB for Compressed RFS Image */
157				reg = <0x00500000 0x00400000>;
158				label = "SPI Compressed RFS Image";
159			};
160
161			partition@900000 {
162				/* 7MB for JFFS2 based RFS */
163				reg = <0x00900000 0x00700000>;
164				label = "SPI JFFS2 RFS";
165			};
166		};
167	};
168
169	i2c@3000 {
170		rtc@68 {
171			compatible = "dallas,ds1339";
172			reg = <0x68>;
173		};
174	};
175
176	usb@22000 {
177		phy_type = "ulpi";
178	};
179
180	usb@23000 {
181		status = "disabled";
182	};
183
184	mdio@24000 {
185		phy0: ethernet-phy@0 {
186			interrupts = <3 1 0 0>;
187			reg = <0x0>;
188		};
189		phy1: ethernet-phy@1 {
190			interrupts = <2 1 0 0>;
191			reg = <0x1>;
192		};
193		phy2: ethernet-phy@2 {
194			interrupts = <1 1 0 0>;
195			reg = <0x2>;
196		};
197	};
198
199	mdio@25000 {
200		tbi0: tbi-phy@11 {
201			reg = <0x11>;
202			device_type = "tbi-phy";
203		};
204	};
205
206	mdio@26000 {
207		tbi1: tbi-phy@11 {
208			reg = <0x11>;
209			device_type = "tbi-phy";
210		};
211	};
212
213	ethernet@b0000 {
214		phy-handle = <&phy2>;
215		phy-connection-type = "rgmii-id";
216	};
217
218	ethernet@b1000 {
219		phy-handle = <&phy0>;
220		tbi-handle = <&tbi0>;
221		phy-connection-type = "sgmii";
222	};
223
224	ethernet@b2000 {
225		phy-handle = <&phy1>;
226		phy-connection-type = "rgmii-id";
227	};
228};