Loading...
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * High-level sync()-related operations
4 */
5
6#include <linux/blkdev.h>
7#include <linux/kernel.h>
8#include <linux/file.h>
9#include <linux/fs.h>
10#include <linux/slab.h>
11#include <linux/export.h>
12#include <linux/namei.h>
13#include <linux/sched.h>
14#include <linux/writeback.h>
15#include <linux/syscalls.h>
16#include <linux/linkage.h>
17#include <linux/pagemap.h>
18#include <linux/quotaops.h>
19#include <linux/backing-dev.h>
20#include "internal.h"
21
22#define VALID_FLAGS (SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE| \
23 SYNC_FILE_RANGE_WAIT_AFTER)
24
25/*
26 * Write out and wait upon all dirty data associated with this
27 * superblock. Filesystem data as well as the underlying block
28 * device. Takes the superblock lock.
29 */
30int sync_filesystem(struct super_block *sb)
31{
32 int ret = 0;
33
34 /*
35 * We need to be protected against the filesystem going from
36 * r/o to r/w or vice versa.
37 */
38 WARN_ON(!rwsem_is_locked(&sb->s_umount));
39
40 /*
41 * No point in syncing out anything if the filesystem is read-only.
42 */
43 if (sb_rdonly(sb))
44 return 0;
45
46 /*
47 * Do the filesystem syncing work. For simple filesystems
48 * writeback_inodes_sb(sb) just dirties buffers with inodes so we have
49 * to submit I/O for these buffers via sync_blockdev(). This also
50 * speeds up the wait == 1 case since in that case write_inode()
51 * methods call sync_dirty_buffer() and thus effectively write one block
52 * at a time.
53 */
54 writeback_inodes_sb(sb, WB_REASON_SYNC);
55 if (sb->s_op->sync_fs) {
56 ret = sb->s_op->sync_fs(sb, 0);
57 if (ret)
58 return ret;
59 }
60 ret = sync_blockdev_nowait(sb->s_bdev);
61 if (ret)
62 return ret;
63
64 sync_inodes_sb(sb);
65 if (sb->s_op->sync_fs) {
66 ret = sb->s_op->sync_fs(sb, 1);
67 if (ret)
68 return ret;
69 }
70 return sync_blockdev(sb->s_bdev);
71}
72EXPORT_SYMBOL(sync_filesystem);
73
74static void sync_inodes_one_sb(struct super_block *sb, void *arg)
75{
76 if (!sb_rdonly(sb))
77 sync_inodes_sb(sb);
78}
79
80static void sync_fs_one_sb(struct super_block *sb, void *arg)
81{
82 if (!sb_rdonly(sb) && !(sb->s_iflags & SB_I_SKIP_SYNC) &&
83 sb->s_op->sync_fs)
84 sb->s_op->sync_fs(sb, *(int *)arg);
85}
86
87/*
88 * Sync everything. We start by waking flusher threads so that most of
89 * writeback runs on all devices in parallel. Then we sync all inodes reliably
90 * which effectively also waits for all flusher threads to finish doing
91 * writeback. At this point all data is on disk so metadata should be stable
92 * and we tell filesystems to sync their metadata via ->sync_fs() calls.
93 * Finally, we writeout all block devices because some filesystems (e.g. ext2)
94 * just write metadata (such as inodes or bitmaps) to block device page cache
95 * and do not sync it on their own in ->sync_fs().
96 */
97void ksys_sync(void)
98{
99 int nowait = 0, wait = 1;
100
101 wakeup_flusher_threads(WB_REASON_SYNC);
102 iterate_supers(sync_inodes_one_sb, NULL);
103 iterate_supers(sync_fs_one_sb, &nowait);
104 iterate_supers(sync_fs_one_sb, &wait);
105 sync_bdevs(false);
106 sync_bdevs(true);
107 if (unlikely(laptop_mode))
108 laptop_sync_completion();
109}
110
111SYSCALL_DEFINE0(sync)
112{
113 ksys_sync();
114 return 0;
115}
116
117static void do_sync_work(struct work_struct *work)
118{
119 int nowait = 0;
120
121 /*
122 * Sync twice to reduce the possibility we skipped some inodes / pages
123 * because they were temporarily locked
124 */
125 iterate_supers(sync_inodes_one_sb, &nowait);
126 iterate_supers(sync_fs_one_sb, &nowait);
127 sync_bdevs(false);
128 iterate_supers(sync_inodes_one_sb, &nowait);
129 iterate_supers(sync_fs_one_sb, &nowait);
130 sync_bdevs(false);
131 printk("Emergency Sync complete\n");
132 kfree(work);
133}
134
135void emergency_sync(void)
136{
137 struct work_struct *work;
138
139 work = kmalloc(sizeof(*work), GFP_ATOMIC);
140 if (work) {
141 INIT_WORK(work, do_sync_work);
142 schedule_work(work);
143 }
144}
145
146/*
147 * sync a single super
148 */
149SYSCALL_DEFINE1(syncfs, int, fd)
150{
151 struct fd f = fdget(fd);
152 struct super_block *sb;
153 int ret, ret2;
154
155 if (!f.file)
156 return -EBADF;
157 sb = f.file->f_path.dentry->d_sb;
158
159 down_read(&sb->s_umount);
160 ret = sync_filesystem(sb);
161 up_read(&sb->s_umount);
162
163 ret2 = errseq_check_and_advance(&sb->s_wb_err, &f.file->f_sb_err);
164
165 fdput(f);
166 return ret ? ret : ret2;
167}
168
169/**
170 * vfs_fsync_range - helper to sync a range of data & metadata to disk
171 * @file: file to sync
172 * @start: offset in bytes of the beginning of data range to sync
173 * @end: offset in bytes of the end of data range (inclusive)
174 * @datasync: perform only datasync
175 *
176 * Write back data in range @start..@end and metadata for @file to disk. If
177 * @datasync is set only metadata needed to access modified file data is
178 * written.
179 */
180int vfs_fsync_range(struct file *file, loff_t start, loff_t end, int datasync)
181{
182 struct inode *inode = file->f_mapping->host;
183
184 if (!file->f_op->fsync)
185 return -EINVAL;
186 if (!datasync && (inode->i_state & I_DIRTY_TIME))
187 mark_inode_dirty_sync(inode);
188 return file->f_op->fsync(file, start, end, datasync);
189}
190EXPORT_SYMBOL(vfs_fsync_range);
191
192/**
193 * vfs_fsync - perform a fsync or fdatasync on a file
194 * @file: file to sync
195 * @datasync: only perform a fdatasync operation
196 *
197 * Write back data and metadata for @file to disk. If @datasync is
198 * set only metadata needed to access modified file data is written.
199 */
200int vfs_fsync(struct file *file, int datasync)
201{
202 return vfs_fsync_range(file, 0, LLONG_MAX, datasync);
203}
204EXPORT_SYMBOL(vfs_fsync);
205
206static int do_fsync(unsigned int fd, int datasync)
207{
208 struct fd f = fdget(fd);
209 int ret = -EBADF;
210
211 if (f.file) {
212 ret = vfs_fsync(f.file, datasync);
213 fdput(f);
214 }
215 return ret;
216}
217
218SYSCALL_DEFINE1(fsync, unsigned int, fd)
219{
220 return do_fsync(fd, 0);
221}
222
223SYSCALL_DEFINE1(fdatasync, unsigned int, fd)
224{
225 return do_fsync(fd, 1);
226}
227
228int sync_file_range(struct file *file, loff_t offset, loff_t nbytes,
229 unsigned int flags)
230{
231 int ret;
232 struct address_space *mapping;
233 loff_t endbyte; /* inclusive */
234 umode_t i_mode;
235
236 ret = -EINVAL;
237 if (flags & ~VALID_FLAGS)
238 goto out;
239
240 endbyte = offset + nbytes;
241
242 if ((s64)offset < 0)
243 goto out;
244 if ((s64)endbyte < 0)
245 goto out;
246 if (endbyte < offset)
247 goto out;
248
249 if (sizeof(pgoff_t) == 4) {
250 if (offset >= (0x100000000ULL << PAGE_SHIFT)) {
251 /*
252 * The range starts outside a 32 bit machine's
253 * pagecache addressing capabilities. Let it "succeed"
254 */
255 ret = 0;
256 goto out;
257 }
258 if (endbyte >= (0x100000000ULL << PAGE_SHIFT)) {
259 /*
260 * Out to EOF
261 */
262 nbytes = 0;
263 }
264 }
265
266 if (nbytes == 0)
267 endbyte = LLONG_MAX;
268 else
269 endbyte--; /* inclusive */
270
271 i_mode = file_inode(file)->i_mode;
272 ret = -ESPIPE;
273 if (!S_ISREG(i_mode) && !S_ISBLK(i_mode) && !S_ISDIR(i_mode) &&
274 !S_ISLNK(i_mode))
275 goto out;
276
277 mapping = file->f_mapping;
278 ret = 0;
279 if (flags & SYNC_FILE_RANGE_WAIT_BEFORE) {
280 ret = file_fdatawait_range(file, offset, endbyte);
281 if (ret < 0)
282 goto out;
283 }
284
285 if (flags & SYNC_FILE_RANGE_WRITE) {
286 int sync_mode = WB_SYNC_NONE;
287
288 if ((flags & SYNC_FILE_RANGE_WRITE_AND_WAIT) ==
289 SYNC_FILE_RANGE_WRITE_AND_WAIT)
290 sync_mode = WB_SYNC_ALL;
291
292 ret = __filemap_fdatawrite_range(mapping, offset, endbyte,
293 sync_mode);
294 if (ret < 0)
295 goto out;
296 }
297
298 if (flags & SYNC_FILE_RANGE_WAIT_AFTER)
299 ret = file_fdatawait_range(file, offset, endbyte);
300
301out:
302 return ret;
303}
304
305/*
306 * ksys_sync_file_range() permits finely controlled syncing over a segment of
307 * a file in the range offset .. (offset+nbytes-1) inclusive. If nbytes is
308 * zero then ksys_sync_file_range() will operate from offset out to EOF.
309 *
310 * The flag bits are:
311 *
312 * SYNC_FILE_RANGE_WAIT_BEFORE: wait upon writeout of all pages in the range
313 * before performing the write.
314 *
315 * SYNC_FILE_RANGE_WRITE: initiate writeout of all those dirty pages in the
316 * range which are not presently under writeback. Note that this may block for
317 * significant periods due to exhaustion of disk request structures.
318 *
319 * SYNC_FILE_RANGE_WAIT_AFTER: wait upon writeout of all pages in the range
320 * after performing the write.
321 *
322 * Useful combinations of the flag bits are:
323 *
324 * SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE: ensures that all pages
325 * in the range which were dirty on entry to ksys_sync_file_range() are placed
326 * under writeout. This is a start-write-for-data-integrity operation.
327 *
328 * SYNC_FILE_RANGE_WRITE: start writeout of all dirty pages in the range which
329 * are not presently under writeout. This is an asynchronous flush-to-disk
330 * operation. Not suitable for data integrity operations.
331 *
332 * SYNC_FILE_RANGE_WAIT_BEFORE (or SYNC_FILE_RANGE_WAIT_AFTER): wait for
333 * completion of writeout of all pages in the range. This will be used after an
334 * earlier SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE operation to wait
335 * for that operation to complete and to return the result.
336 *
337 * SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE|SYNC_FILE_RANGE_WAIT_AFTER
338 * (a.k.a. SYNC_FILE_RANGE_WRITE_AND_WAIT):
339 * a traditional sync() operation. This is a write-for-data-integrity operation
340 * which will ensure that all pages in the range which were dirty on entry to
341 * ksys_sync_file_range() are written to disk. It should be noted that disk
342 * caches are not flushed by this call, so there are no guarantees here that the
343 * data will be available on disk after a crash.
344 *
345 *
346 * SYNC_FILE_RANGE_WAIT_BEFORE and SYNC_FILE_RANGE_WAIT_AFTER will detect any
347 * I/O errors or ENOSPC conditions and will return those to the caller, after
348 * clearing the EIO and ENOSPC flags in the address_space.
349 *
350 * It should be noted that none of these operations write out the file's
351 * metadata. So unless the application is strictly performing overwrites of
352 * already-instantiated disk blocks, there are no guarantees here that the data
353 * will be available after a crash.
354 */
355int ksys_sync_file_range(int fd, loff_t offset, loff_t nbytes,
356 unsigned int flags)
357{
358 int ret;
359 struct fd f;
360
361 ret = -EBADF;
362 f = fdget(fd);
363 if (f.file)
364 ret = sync_file_range(f.file, offset, nbytes, flags);
365
366 fdput(f);
367 return ret;
368}
369
370SYSCALL_DEFINE4(sync_file_range, int, fd, loff_t, offset, loff_t, nbytes,
371 unsigned int, flags)
372{
373 return ksys_sync_file_range(fd, offset, nbytes, flags);
374}
375
376#if defined(CONFIG_COMPAT) && defined(__ARCH_WANT_COMPAT_SYNC_FILE_RANGE)
377COMPAT_SYSCALL_DEFINE6(sync_file_range, int, fd, compat_arg_u64_dual(offset),
378 compat_arg_u64_dual(nbytes), unsigned int, flags)
379{
380 return ksys_sync_file_range(fd, compat_arg_u64_glue(offset),
381 compat_arg_u64_glue(nbytes), flags);
382}
383#endif
384
385/* It would be nice if people remember that not all the world's an i386
386 when they introduce new system calls */
387SYSCALL_DEFINE4(sync_file_range2, int, fd, unsigned int, flags,
388 loff_t, offset, loff_t, nbytes)
389{
390 return ksys_sync_file_range(fd, offset, nbytes, flags);
391}
1/*
2 * High-level sync()-related operations
3 */
4
5#include <linux/kernel.h>
6#include <linux/file.h>
7#include <linux/fs.h>
8#include <linux/slab.h>
9#include <linux/export.h>
10#include <linux/namei.h>
11#include <linux/sched.h>
12#include <linux/writeback.h>
13#include <linux/syscalls.h>
14#include <linux/linkage.h>
15#include <linux/pagemap.h>
16#include <linux/quotaops.h>
17#include <linux/backing-dev.h>
18#include "internal.h"
19
20#define VALID_FLAGS (SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE| \
21 SYNC_FILE_RANGE_WAIT_AFTER)
22
23/*
24 * Do the filesystem syncing work. For simple filesystems
25 * writeback_inodes_sb(sb) just dirties buffers with inodes so we have to
26 * submit IO for these buffers via __sync_blockdev(). This also speeds up the
27 * wait == 1 case since in that case write_inode() functions do
28 * sync_dirty_buffer() and thus effectively write one block at a time.
29 */
30static int __sync_filesystem(struct super_block *sb, int wait)
31{
32 if (wait)
33 sync_inodes_sb(sb);
34 else
35 writeback_inodes_sb(sb, WB_REASON_SYNC);
36
37 if (sb->s_op->sync_fs)
38 sb->s_op->sync_fs(sb, wait);
39 return __sync_blockdev(sb->s_bdev, wait);
40}
41
42/*
43 * Write out and wait upon all dirty data associated with this
44 * superblock. Filesystem data as well as the underlying block
45 * device. Takes the superblock lock.
46 */
47int sync_filesystem(struct super_block *sb)
48{
49 int ret;
50
51 /*
52 * We need to be protected against the filesystem going from
53 * r/o to r/w or vice versa.
54 */
55 WARN_ON(!rwsem_is_locked(&sb->s_umount));
56
57 /*
58 * No point in syncing out anything if the filesystem is read-only.
59 */
60 if (sb->s_flags & MS_RDONLY)
61 return 0;
62
63 ret = __sync_filesystem(sb, 0);
64 if (ret < 0)
65 return ret;
66 return __sync_filesystem(sb, 1);
67}
68EXPORT_SYMBOL_GPL(sync_filesystem);
69
70static void sync_inodes_one_sb(struct super_block *sb, void *arg)
71{
72 if (!(sb->s_flags & MS_RDONLY))
73 sync_inodes_sb(sb);
74}
75
76static void sync_fs_one_sb(struct super_block *sb, void *arg)
77{
78 if (!(sb->s_flags & MS_RDONLY) && sb->s_op->sync_fs)
79 sb->s_op->sync_fs(sb, *(int *)arg);
80}
81
82static void fdatawrite_one_bdev(struct block_device *bdev, void *arg)
83{
84 filemap_fdatawrite(bdev->bd_inode->i_mapping);
85}
86
87static void fdatawait_one_bdev(struct block_device *bdev, void *arg)
88{
89 filemap_fdatawait(bdev->bd_inode->i_mapping);
90}
91
92/*
93 * Sync everything. We start by waking flusher threads so that most of
94 * writeback runs on all devices in parallel. Then we sync all inodes reliably
95 * which effectively also waits for all flusher threads to finish doing
96 * writeback. At this point all data is on disk so metadata should be stable
97 * and we tell filesystems to sync their metadata via ->sync_fs() calls.
98 * Finally, we writeout all block devices because some filesystems (e.g. ext2)
99 * just write metadata (such as inodes or bitmaps) to block device page cache
100 * and do not sync it on their own in ->sync_fs().
101 */
102SYSCALL_DEFINE0(sync)
103{
104 int nowait = 0, wait = 1;
105
106 wakeup_flusher_threads(0, WB_REASON_SYNC);
107 iterate_supers(sync_inodes_one_sb, NULL);
108 iterate_supers(sync_fs_one_sb, &nowait);
109 iterate_supers(sync_fs_one_sb, &wait);
110 iterate_bdevs(fdatawrite_one_bdev, NULL);
111 iterate_bdevs(fdatawait_one_bdev, NULL);
112 if (unlikely(laptop_mode))
113 laptop_sync_completion();
114 return 0;
115}
116
117static void do_sync_work(struct work_struct *work)
118{
119 int nowait = 0;
120
121 /*
122 * Sync twice to reduce the possibility we skipped some inodes / pages
123 * because they were temporarily locked
124 */
125 iterate_supers(sync_inodes_one_sb, &nowait);
126 iterate_supers(sync_fs_one_sb, &nowait);
127 iterate_bdevs(fdatawrite_one_bdev, NULL);
128 iterate_supers(sync_inodes_one_sb, &nowait);
129 iterate_supers(sync_fs_one_sb, &nowait);
130 iterate_bdevs(fdatawrite_one_bdev, NULL);
131 printk("Emergency Sync complete\n");
132 kfree(work);
133}
134
135void emergency_sync(void)
136{
137 struct work_struct *work;
138
139 work = kmalloc(sizeof(*work), GFP_ATOMIC);
140 if (work) {
141 INIT_WORK(work, do_sync_work);
142 schedule_work(work);
143 }
144}
145
146/*
147 * sync a single super
148 */
149SYSCALL_DEFINE1(syncfs, int, fd)
150{
151 struct fd f = fdget(fd);
152 struct super_block *sb;
153 int ret;
154
155 if (!f.file)
156 return -EBADF;
157 sb = f.file->f_dentry->d_sb;
158
159 down_read(&sb->s_umount);
160 ret = sync_filesystem(sb);
161 up_read(&sb->s_umount);
162
163 fdput(f);
164 return ret;
165}
166
167/**
168 * vfs_fsync_range - helper to sync a range of data & metadata to disk
169 * @file: file to sync
170 * @start: offset in bytes of the beginning of data range to sync
171 * @end: offset in bytes of the end of data range (inclusive)
172 * @datasync: perform only datasync
173 *
174 * Write back data in range @start..@end and metadata for @file to disk. If
175 * @datasync is set only metadata needed to access modified file data is
176 * written.
177 */
178int vfs_fsync_range(struct file *file, loff_t start, loff_t end, int datasync)
179{
180 if (!file->f_op->fsync)
181 return -EINVAL;
182 return file->f_op->fsync(file, start, end, datasync);
183}
184EXPORT_SYMBOL(vfs_fsync_range);
185
186/**
187 * vfs_fsync - perform a fsync or fdatasync on a file
188 * @file: file to sync
189 * @datasync: only perform a fdatasync operation
190 *
191 * Write back data and metadata for @file to disk. If @datasync is
192 * set only metadata needed to access modified file data is written.
193 */
194int vfs_fsync(struct file *file, int datasync)
195{
196 return vfs_fsync_range(file, 0, LLONG_MAX, datasync);
197}
198EXPORT_SYMBOL(vfs_fsync);
199
200static int do_fsync(unsigned int fd, int datasync)
201{
202 struct fd f = fdget(fd);
203 int ret = -EBADF;
204
205 if (f.file) {
206 ret = vfs_fsync(f.file, datasync);
207 fdput(f);
208 }
209 return ret;
210}
211
212SYSCALL_DEFINE1(fsync, unsigned int, fd)
213{
214 return do_fsync(fd, 0);
215}
216
217SYSCALL_DEFINE1(fdatasync, unsigned int, fd)
218{
219 return do_fsync(fd, 1);
220}
221
222/*
223 * sys_sync_file_range() permits finely controlled syncing over a segment of
224 * a file in the range offset .. (offset+nbytes-1) inclusive. If nbytes is
225 * zero then sys_sync_file_range() will operate from offset out to EOF.
226 *
227 * The flag bits are:
228 *
229 * SYNC_FILE_RANGE_WAIT_BEFORE: wait upon writeout of all pages in the range
230 * before performing the write.
231 *
232 * SYNC_FILE_RANGE_WRITE: initiate writeout of all those dirty pages in the
233 * range which are not presently under writeback. Note that this may block for
234 * significant periods due to exhaustion of disk request structures.
235 *
236 * SYNC_FILE_RANGE_WAIT_AFTER: wait upon writeout of all pages in the range
237 * after performing the write.
238 *
239 * Useful combinations of the flag bits are:
240 *
241 * SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE: ensures that all pages
242 * in the range which were dirty on entry to sys_sync_file_range() are placed
243 * under writeout. This is a start-write-for-data-integrity operation.
244 *
245 * SYNC_FILE_RANGE_WRITE: start writeout of all dirty pages in the range which
246 * are not presently under writeout. This is an asynchronous flush-to-disk
247 * operation. Not suitable for data integrity operations.
248 *
249 * SYNC_FILE_RANGE_WAIT_BEFORE (or SYNC_FILE_RANGE_WAIT_AFTER): wait for
250 * completion of writeout of all pages in the range. This will be used after an
251 * earlier SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE operation to wait
252 * for that operation to complete and to return the result.
253 *
254 * SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE|SYNC_FILE_RANGE_WAIT_AFTER:
255 * a traditional sync() operation. This is a write-for-data-integrity operation
256 * which will ensure that all pages in the range which were dirty on entry to
257 * sys_sync_file_range() are committed to disk.
258 *
259 *
260 * SYNC_FILE_RANGE_WAIT_BEFORE and SYNC_FILE_RANGE_WAIT_AFTER will detect any
261 * I/O errors or ENOSPC conditions and will return those to the caller, after
262 * clearing the EIO and ENOSPC flags in the address_space.
263 *
264 * It should be noted that none of these operations write out the file's
265 * metadata. So unless the application is strictly performing overwrites of
266 * already-instantiated disk blocks, there are no guarantees here that the data
267 * will be available after a crash.
268 */
269SYSCALL_DEFINE4(sync_file_range, int, fd, loff_t, offset, loff_t, nbytes,
270 unsigned int, flags)
271{
272 int ret;
273 struct fd f;
274 struct address_space *mapping;
275 loff_t endbyte; /* inclusive */
276 umode_t i_mode;
277
278 ret = -EINVAL;
279 if (flags & ~VALID_FLAGS)
280 goto out;
281
282 endbyte = offset + nbytes;
283
284 if ((s64)offset < 0)
285 goto out;
286 if ((s64)endbyte < 0)
287 goto out;
288 if (endbyte < offset)
289 goto out;
290
291 if (sizeof(pgoff_t) == 4) {
292 if (offset >= (0x100000000ULL << PAGE_CACHE_SHIFT)) {
293 /*
294 * The range starts outside a 32 bit machine's
295 * pagecache addressing capabilities. Let it "succeed"
296 */
297 ret = 0;
298 goto out;
299 }
300 if (endbyte >= (0x100000000ULL << PAGE_CACHE_SHIFT)) {
301 /*
302 * Out to EOF
303 */
304 nbytes = 0;
305 }
306 }
307
308 if (nbytes == 0)
309 endbyte = LLONG_MAX;
310 else
311 endbyte--; /* inclusive */
312
313 ret = -EBADF;
314 f = fdget(fd);
315 if (!f.file)
316 goto out;
317
318 i_mode = file_inode(f.file)->i_mode;
319 ret = -ESPIPE;
320 if (!S_ISREG(i_mode) && !S_ISBLK(i_mode) && !S_ISDIR(i_mode) &&
321 !S_ISLNK(i_mode))
322 goto out_put;
323
324 mapping = f.file->f_mapping;
325 if (!mapping) {
326 ret = -EINVAL;
327 goto out_put;
328 }
329
330 ret = 0;
331 if (flags & SYNC_FILE_RANGE_WAIT_BEFORE) {
332 ret = filemap_fdatawait_range(mapping, offset, endbyte);
333 if (ret < 0)
334 goto out_put;
335 }
336
337 if (flags & SYNC_FILE_RANGE_WRITE) {
338 ret = filemap_fdatawrite_range(mapping, offset, endbyte);
339 if (ret < 0)
340 goto out_put;
341 }
342
343 if (flags & SYNC_FILE_RANGE_WAIT_AFTER)
344 ret = filemap_fdatawait_range(mapping, offset, endbyte);
345
346out_put:
347 fdput(f);
348out:
349 return ret;
350}
351
352/* It would be nice if people remember that not all the world's an i386
353 when they introduce new system calls */
354SYSCALL_DEFINE4(sync_file_range2, int, fd, unsigned int, flags,
355 loff_t, offset, loff_t, nbytes)
356{
357 return sys_sync_file_range(fd, offset, nbytes, flags);
358}