Loading...
1// SPDX-License-Identifier: GPL-2.0+
2/******************************************************************************
3 * speedtch.c - Alcatel SpeedTouch USB xDSL modem driver
4 *
5 * Copyright (C) 2001, Alcatel
6 * Copyright (C) 2003, Duncan Sands
7 * Copyright (C) 2004, David Woodhouse
8 *
9 * Based on "modem_run.c", copyright (C) 2001, Benoit Papillault
10 ******************************************************************************/
11
12#include <asm/page.h>
13#include <linux/device.h>
14#include <linux/errno.h>
15#include <linux/firmware.h>
16#include <linux/kernel.h>
17#include <linux/module.h>
18#include <linux/moduleparam.h>
19#include <linux/slab.h>
20#include <linux/stat.h>
21#include <linux/timer.h>
22#include <linux/types.h>
23#include <linux/usb/ch9.h>
24#include <linux/workqueue.h>
25
26#include "usbatm.h"
27
28#define DRIVER_AUTHOR "Johan Verrept, Duncan Sands <duncan.sands@free.fr>"
29#define DRIVER_DESC "Alcatel SpeedTouch USB driver"
30
31static const char speedtch_driver_name[] = "speedtch";
32
33#define CTRL_TIMEOUT 2000 /* milliseconds */
34#define DATA_TIMEOUT 2000 /* milliseconds */
35
36#define OFFSET_7 0 /* size 1 */
37#define OFFSET_b 1 /* size 8 */
38#define OFFSET_d 9 /* size 4 */
39#define OFFSET_e 13 /* size 1 */
40#define OFFSET_f 14 /* size 1 */
41
42#define SIZE_7 1
43#define SIZE_b 8
44#define SIZE_d 4
45#define SIZE_e 1
46#define SIZE_f 1
47
48#define MIN_POLL_DELAY 5000 /* milliseconds */
49#define MAX_POLL_DELAY 60000 /* milliseconds */
50
51#define RESUBMIT_DELAY 1000 /* milliseconds */
52
53#define DEFAULT_BULK_ALTSETTING 1
54#define DEFAULT_ISOC_ALTSETTING 3
55#define DEFAULT_DL_512_FIRST 0
56#define DEFAULT_ENABLE_ISOC 0
57#define DEFAULT_SW_BUFFERING 0
58
59static unsigned int altsetting = 0; /* zero means: use the default */
60static bool dl_512_first = DEFAULT_DL_512_FIRST;
61static bool enable_isoc = DEFAULT_ENABLE_ISOC;
62static bool sw_buffering = DEFAULT_SW_BUFFERING;
63
64#define DEFAULT_B_MAX_DSL 8128
65#define DEFAULT_MODEM_MODE 11
66#define MODEM_OPTION_LENGTH 16
67static const unsigned char DEFAULT_MODEM_OPTION[MODEM_OPTION_LENGTH] = {
68 0x10, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
69};
70
71static unsigned int BMaxDSL = DEFAULT_B_MAX_DSL;
72static unsigned char ModemMode = DEFAULT_MODEM_MODE;
73static unsigned char ModemOption[MODEM_OPTION_LENGTH];
74static unsigned int num_ModemOption;
75
76module_param(altsetting, uint, S_IRUGO | S_IWUSR);
77MODULE_PARM_DESC(altsetting,
78 "Alternative setting for data interface (bulk_default: "
79 __MODULE_STRING(DEFAULT_BULK_ALTSETTING) "; isoc_default: "
80 __MODULE_STRING(DEFAULT_ISOC_ALTSETTING) ")");
81
82module_param(dl_512_first, bool, S_IRUGO | S_IWUSR);
83MODULE_PARM_DESC(dl_512_first,
84 "Read 512 bytes before sending firmware (default: "
85 __MODULE_STRING(DEFAULT_DL_512_FIRST) ")");
86
87module_param(enable_isoc, bool, S_IRUGO | S_IWUSR);
88MODULE_PARM_DESC(enable_isoc,
89 "Use isochronous transfers if available (default: "
90 __MODULE_STRING(DEFAULT_ENABLE_ISOC) ")");
91
92module_param(sw_buffering, bool, S_IRUGO | S_IWUSR);
93MODULE_PARM_DESC(sw_buffering,
94 "Enable software buffering (default: "
95 __MODULE_STRING(DEFAULT_SW_BUFFERING) ")");
96
97module_param(BMaxDSL, uint, S_IRUGO | S_IWUSR);
98MODULE_PARM_DESC(BMaxDSL,
99 "default: " __MODULE_STRING(DEFAULT_B_MAX_DSL));
100
101module_param(ModemMode, byte, S_IRUGO | S_IWUSR);
102MODULE_PARM_DESC(ModemMode,
103 "default: " __MODULE_STRING(DEFAULT_MODEM_MODE));
104
105module_param_array(ModemOption, byte, &num_ModemOption, S_IRUGO);
106MODULE_PARM_DESC(ModemOption, "default: 0x10,0x00,0x00,0x00,0x20");
107
108#define INTERFACE_DATA 1
109#define ENDPOINT_INT 0x81
110#define ENDPOINT_BULK_DATA 0x07
111#define ENDPOINT_ISOC_DATA 0x07
112#define ENDPOINT_FIRMWARE 0x05
113
114struct speedtch_params {
115 unsigned int altsetting;
116 unsigned int BMaxDSL;
117 unsigned char ModemMode;
118 unsigned char ModemOption[MODEM_OPTION_LENGTH];
119};
120
121struct speedtch_instance_data {
122 struct usbatm_data *usbatm;
123
124 struct speedtch_params params; /* set in probe, constant afterwards */
125
126 struct timer_list status_check_timer;
127 struct work_struct status_check_work;
128
129 unsigned char last_status;
130
131 int poll_delay; /* milliseconds */
132
133 struct timer_list resubmit_timer;
134 struct urb *int_urb;
135 unsigned char int_data[16];
136
137 unsigned char scratch_buffer[16];
138};
139
140/***************
141** firmware **
142***************/
143
144static void speedtch_set_swbuff(struct speedtch_instance_data *instance, int state)
145{
146 struct usbatm_data *usbatm = instance->usbatm;
147 struct usb_device *usb_dev = usbatm->usb_dev;
148 int ret;
149
150 ret = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0),
151 0x32, 0x40, state ? 0x01 : 0x00, 0x00, NULL, 0, CTRL_TIMEOUT);
152 if (ret < 0)
153 usb_warn(usbatm,
154 "%sabling SW buffering: usb_control_msg returned %d\n",
155 state ? "En" : "Dis", ret);
156 else
157 usb_dbg(usbatm, "speedtch_set_swbuff: %sbled SW buffering\n", state ? "En" : "Dis");
158}
159
160static void speedtch_test_sequence(struct speedtch_instance_data *instance)
161{
162 struct usbatm_data *usbatm = instance->usbatm;
163 struct usb_device *usb_dev = usbatm->usb_dev;
164 unsigned char *buf = instance->scratch_buffer;
165 int ret;
166
167 /* URB 147 */
168 buf[0] = 0x1c;
169 buf[1] = 0x50;
170 ret = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0),
171 0x01, 0x40, 0x0b, 0x00, buf, 2, CTRL_TIMEOUT);
172 if (ret < 0)
173 usb_warn(usbatm, "%s failed on URB147: %d\n", __func__, ret);
174
175 /* URB 148 */
176 buf[0] = 0x32;
177 buf[1] = 0x00;
178 ret = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0),
179 0x01, 0x40, 0x02, 0x00, buf, 2, CTRL_TIMEOUT);
180 if (ret < 0)
181 usb_warn(usbatm, "%s failed on URB148: %d\n", __func__, ret);
182
183 /* URB 149 */
184 buf[0] = 0x01;
185 buf[1] = 0x00;
186 buf[2] = 0x01;
187 ret = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0),
188 0x01, 0x40, 0x03, 0x00, buf, 3, CTRL_TIMEOUT);
189 if (ret < 0)
190 usb_warn(usbatm, "%s failed on URB149: %d\n", __func__, ret);
191
192 /* URB 150 */
193 buf[0] = 0x01;
194 buf[1] = 0x00;
195 buf[2] = 0x01;
196 ret = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0),
197 0x01, 0x40, 0x04, 0x00, buf, 3, CTRL_TIMEOUT);
198 if (ret < 0)
199 usb_warn(usbatm, "%s failed on URB150: %d\n", __func__, ret);
200
201 /* Extra initialisation in recent drivers - gives higher speeds */
202
203 /* URBext1 */
204 buf[0] = instance->params.ModemMode;
205 ret = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0),
206 0x01, 0x40, 0x11, 0x00, buf, 1, CTRL_TIMEOUT);
207 if (ret < 0)
208 usb_warn(usbatm, "%s failed on URBext1: %d\n", __func__, ret);
209
210 /* URBext2 */
211 /* This seems to be the one which actually triggers the higher sync
212 rate -- it does require the new firmware too, although it works OK
213 with older firmware */
214 ret = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0),
215 0x01, 0x40, 0x14, 0x00,
216 instance->params.ModemOption,
217 MODEM_OPTION_LENGTH, CTRL_TIMEOUT);
218 if (ret < 0)
219 usb_warn(usbatm, "%s failed on URBext2: %d\n", __func__, ret);
220
221 /* URBext3 */
222 buf[0] = instance->params.BMaxDSL & 0xff;
223 buf[1] = instance->params.BMaxDSL >> 8;
224 ret = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0),
225 0x01, 0x40, 0x12, 0x00, buf, 2, CTRL_TIMEOUT);
226 if (ret < 0)
227 usb_warn(usbatm, "%s failed on URBext3: %d\n", __func__, ret);
228}
229
230static int speedtch_upload_firmware(struct speedtch_instance_data *instance,
231 const struct firmware *fw1,
232 const struct firmware *fw2)
233{
234 unsigned char *buffer;
235 struct usbatm_data *usbatm = instance->usbatm;
236 struct usb_device *usb_dev = usbatm->usb_dev;
237 int actual_length;
238 int ret = 0;
239 int offset;
240
241 usb_dbg(usbatm, "%s entered\n", __func__);
242
243 buffer = (unsigned char *)__get_free_page(GFP_KERNEL);
244 if (!buffer) {
245 ret = -ENOMEM;
246 usb_dbg(usbatm, "%s: no memory for buffer!\n", __func__);
247 goto out;
248 }
249
250 if (!usb_ifnum_to_if(usb_dev, 2)) {
251 ret = -ENODEV;
252 usb_dbg(usbatm, "%s: interface not found!\n", __func__);
253 goto out_free;
254 }
255
256 /* URB 7 */
257 if (dl_512_first) { /* some modems need a read before writing the firmware */
258 ret = usb_bulk_msg(usb_dev, usb_rcvbulkpipe(usb_dev, ENDPOINT_FIRMWARE),
259 buffer, 0x200, &actual_length, 2000);
260
261 if (ret < 0 && ret != -ETIMEDOUT)
262 usb_warn(usbatm, "%s: read BLOCK0 from modem failed (%d)!\n", __func__, ret);
263 else
264 usb_dbg(usbatm, "%s: BLOCK0 downloaded (%d bytes)\n", __func__, ret);
265 }
266
267 /* URB 8 : both leds are static green */
268 for (offset = 0; offset < fw1->size; offset += PAGE_SIZE) {
269 int thislen = min_t(int, PAGE_SIZE, fw1->size - offset);
270 memcpy(buffer, fw1->data + offset, thislen);
271
272 ret = usb_bulk_msg(usb_dev, usb_sndbulkpipe(usb_dev, ENDPOINT_FIRMWARE),
273 buffer, thislen, &actual_length, DATA_TIMEOUT);
274
275 if (ret < 0) {
276 usb_err(usbatm, "%s: write BLOCK1 to modem failed (%d)!\n", __func__, ret);
277 goto out_free;
278 }
279 usb_dbg(usbatm, "%s: BLOCK1 uploaded (%zu bytes)\n", __func__, fw1->size);
280 }
281
282 /* USB led blinking green, ADSL led off */
283
284 /* URB 11 */
285 ret = usb_bulk_msg(usb_dev, usb_rcvbulkpipe(usb_dev, ENDPOINT_FIRMWARE),
286 buffer, 0x200, &actual_length, DATA_TIMEOUT);
287
288 if (ret < 0) {
289 usb_err(usbatm, "%s: read BLOCK2 from modem failed (%d)!\n", __func__, ret);
290 goto out_free;
291 }
292 usb_dbg(usbatm, "%s: BLOCK2 downloaded (%d bytes)\n", __func__, actual_length);
293
294 /* URBs 12 to 139 - USB led blinking green, ADSL led off */
295 for (offset = 0; offset < fw2->size; offset += PAGE_SIZE) {
296 int thislen = min_t(int, PAGE_SIZE, fw2->size - offset);
297 memcpy(buffer, fw2->data + offset, thislen);
298
299 ret = usb_bulk_msg(usb_dev, usb_sndbulkpipe(usb_dev, ENDPOINT_FIRMWARE),
300 buffer, thislen, &actual_length, DATA_TIMEOUT);
301
302 if (ret < 0) {
303 usb_err(usbatm, "%s: write BLOCK3 to modem failed (%d)!\n", __func__, ret);
304 goto out_free;
305 }
306 }
307 usb_dbg(usbatm, "%s: BLOCK3 uploaded (%zu bytes)\n", __func__, fw2->size);
308
309 /* USB led static green, ADSL led static red */
310
311 /* URB 142 */
312 ret = usb_bulk_msg(usb_dev, usb_rcvbulkpipe(usb_dev, ENDPOINT_FIRMWARE),
313 buffer, 0x200, &actual_length, DATA_TIMEOUT);
314
315 if (ret < 0) {
316 usb_err(usbatm, "%s: read BLOCK4 from modem failed (%d)!\n", __func__, ret);
317 goto out_free;
318 }
319
320 /* success */
321 usb_dbg(usbatm, "%s: BLOCK4 downloaded (%d bytes)\n", __func__, actual_length);
322
323 /* Delay to allow firmware to start up. We can do this here
324 because we're in our own kernel thread anyway. */
325 msleep_interruptible(1000);
326
327 if ((ret = usb_set_interface(usb_dev, INTERFACE_DATA, instance->params.altsetting)) < 0) {
328 usb_err(usbatm, "%s: setting interface to %d failed (%d)!\n", __func__, instance->params.altsetting, ret);
329 goto out_free;
330 }
331
332 /* Enable software buffering, if requested */
333 if (sw_buffering)
334 speedtch_set_swbuff(instance, 1);
335
336 /* Magic spell; don't ask us what this does */
337 speedtch_test_sequence(instance);
338
339 ret = 0;
340
341out_free:
342 free_page((unsigned long)buffer);
343out:
344 return ret;
345}
346
347static int speedtch_find_firmware(struct usbatm_data *usbatm, struct usb_interface *intf,
348 int phase, const struct firmware **fw_p)
349{
350 struct device *dev = &intf->dev;
351 const u16 bcdDevice = le16_to_cpu(interface_to_usbdev(intf)->descriptor.bcdDevice);
352 const u8 major_revision = bcdDevice >> 8;
353 const u8 minor_revision = bcdDevice & 0xff;
354 char buf[24];
355
356 sprintf(buf, "speedtch-%d.bin.%x.%02x", phase, major_revision, minor_revision);
357 usb_dbg(usbatm, "%s: looking for %s\n", __func__, buf);
358
359 if (request_firmware(fw_p, buf, dev)) {
360 sprintf(buf, "speedtch-%d.bin.%x", phase, major_revision);
361 usb_dbg(usbatm, "%s: looking for %s\n", __func__, buf);
362
363 if (request_firmware(fw_p, buf, dev)) {
364 sprintf(buf, "speedtch-%d.bin", phase);
365 usb_dbg(usbatm, "%s: looking for %s\n", __func__, buf);
366
367 if (request_firmware(fw_p, buf, dev)) {
368 usb_err(usbatm, "%s: no stage %d firmware found!\n", __func__, phase);
369 return -ENOENT;
370 }
371 }
372 }
373
374 usb_info(usbatm, "found stage %d firmware %s\n", phase, buf);
375
376 return 0;
377}
378
379static int speedtch_heavy_init(struct usbatm_data *usbatm, struct usb_interface *intf)
380{
381 const struct firmware *fw1, *fw2;
382 struct speedtch_instance_data *instance = usbatm->driver_data;
383 int ret;
384
385 if ((ret = speedtch_find_firmware(usbatm, intf, 1, &fw1)) < 0)
386 return ret;
387
388 if ((ret = speedtch_find_firmware(usbatm, intf, 2, &fw2)) < 0) {
389 release_firmware(fw1);
390 return ret;
391 }
392
393 if ((ret = speedtch_upload_firmware(instance, fw1, fw2)) < 0)
394 usb_err(usbatm, "%s: firmware upload failed (%d)!\n", __func__, ret);
395
396 release_firmware(fw2);
397 release_firmware(fw1);
398
399 return ret;
400}
401
402
403/**********
404** ATM **
405**********/
406
407static int speedtch_read_status(struct speedtch_instance_data *instance)
408{
409 struct usbatm_data *usbatm = instance->usbatm;
410 struct usb_device *usb_dev = usbatm->usb_dev;
411 unsigned char *buf = instance->scratch_buffer;
412 int ret;
413
414 memset(buf, 0, 16);
415
416 ret = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0),
417 0x12, 0xc0, 0x07, 0x00, buf + OFFSET_7, SIZE_7,
418 CTRL_TIMEOUT);
419 if (ret < 0) {
420 atm_dbg(usbatm, "%s: MSG 7 failed\n", __func__);
421 return ret;
422 }
423
424 ret = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0),
425 0x12, 0xc0, 0x0b, 0x00, buf + OFFSET_b, SIZE_b,
426 CTRL_TIMEOUT);
427 if (ret < 0) {
428 atm_dbg(usbatm, "%s: MSG B failed\n", __func__);
429 return ret;
430 }
431
432 ret = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0),
433 0x12, 0xc0, 0x0d, 0x00, buf + OFFSET_d, SIZE_d,
434 CTRL_TIMEOUT);
435 if (ret < 0) {
436 atm_dbg(usbatm, "%s: MSG D failed\n", __func__);
437 return ret;
438 }
439
440 ret = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0),
441 0x01, 0xc0, 0x0e, 0x00, buf + OFFSET_e, SIZE_e,
442 CTRL_TIMEOUT);
443 if (ret < 0) {
444 atm_dbg(usbatm, "%s: MSG E failed\n", __func__);
445 return ret;
446 }
447
448 ret = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0),
449 0x01, 0xc0, 0x0f, 0x00, buf + OFFSET_f, SIZE_f,
450 CTRL_TIMEOUT);
451 if (ret < 0) {
452 atm_dbg(usbatm, "%s: MSG F failed\n", __func__);
453 return ret;
454 }
455
456 return 0;
457}
458
459static int speedtch_start_synchro(struct speedtch_instance_data *instance)
460{
461 struct usbatm_data *usbatm = instance->usbatm;
462 struct usb_device *usb_dev = usbatm->usb_dev;
463 unsigned char *buf = instance->scratch_buffer;
464 int ret;
465
466 atm_dbg(usbatm, "%s entered\n", __func__);
467
468 memset(buf, 0, 2);
469
470 ret = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0),
471 0x12, 0xc0, 0x04, 0x00,
472 buf, 2, CTRL_TIMEOUT);
473
474 if (ret < 0)
475 atm_warn(usbatm, "failed to start ADSL synchronisation: %d\n", ret);
476 else
477 atm_dbg(usbatm, "%s: modem prodded. %d bytes returned: %02x %02x\n",
478 __func__, ret, buf[0], buf[1]);
479
480 return ret;
481}
482
483static void speedtch_check_status(struct work_struct *work)
484{
485 struct speedtch_instance_data *instance =
486 container_of(work, struct speedtch_instance_data,
487 status_check_work);
488 struct usbatm_data *usbatm = instance->usbatm;
489 struct atm_dev *atm_dev = usbatm->atm_dev;
490 unsigned char *buf = instance->scratch_buffer;
491 int down_speed, up_speed, ret;
492 unsigned char status;
493
494#ifdef VERBOSE_DEBUG
495 atm_dbg(usbatm, "%s entered\n", __func__);
496#endif
497
498 ret = speedtch_read_status(instance);
499 if (ret < 0) {
500 atm_warn(usbatm, "error %d fetching device status\n", ret);
501 instance->poll_delay = min(2 * instance->poll_delay, MAX_POLL_DELAY);
502 return;
503 }
504
505 instance->poll_delay = max(instance->poll_delay / 2, MIN_POLL_DELAY);
506
507 status = buf[OFFSET_7];
508
509 if ((status != instance->last_status) || !status) {
510 atm_dbg(usbatm, "%s: line state 0x%02x\n", __func__, status);
511
512 switch (status) {
513 case 0:
514 atm_dev_signal_change(atm_dev, ATM_PHY_SIG_LOST);
515 if (instance->last_status)
516 atm_info(usbatm, "ADSL line is down\n");
517 /* It may never resync again unless we ask it to... */
518 ret = speedtch_start_synchro(instance);
519 break;
520
521 case 0x08:
522 atm_dev_signal_change(atm_dev, ATM_PHY_SIG_UNKNOWN);
523 atm_info(usbatm, "ADSL line is blocked?\n");
524 break;
525
526 case 0x10:
527 atm_dev_signal_change(atm_dev, ATM_PHY_SIG_LOST);
528 atm_info(usbatm, "ADSL line is synchronising\n");
529 break;
530
531 case 0x20:
532 down_speed = buf[OFFSET_b] | (buf[OFFSET_b + 1] << 8)
533 | (buf[OFFSET_b + 2] << 16) | (buf[OFFSET_b + 3] << 24);
534 up_speed = buf[OFFSET_b + 4] | (buf[OFFSET_b + 5] << 8)
535 | (buf[OFFSET_b + 6] << 16) | (buf[OFFSET_b + 7] << 24);
536
537 if (!(down_speed & 0x0000ffff) && !(up_speed & 0x0000ffff)) {
538 down_speed >>= 16;
539 up_speed >>= 16;
540 }
541
542 atm_dev->link_rate = down_speed * 1000 / 424;
543 atm_dev_signal_change(atm_dev, ATM_PHY_SIG_FOUND);
544
545 atm_info(usbatm,
546 "ADSL line is up (%d kb/s down | %d kb/s up)\n",
547 down_speed, up_speed);
548 break;
549
550 default:
551 atm_dev_signal_change(atm_dev, ATM_PHY_SIG_UNKNOWN);
552 atm_info(usbatm, "unknown line state %02x\n", status);
553 break;
554 }
555
556 instance->last_status = status;
557 }
558}
559
560static void speedtch_status_poll(struct timer_list *t)
561{
562 struct speedtch_instance_data *instance = from_timer(instance, t,
563 status_check_timer);
564
565 schedule_work(&instance->status_check_work);
566
567 /* The following check is racy, but the race is harmless */
568 if (instance->poll_delay < MAX_POLL_DELAY)
569 mod_timer(&instance->status_check_timer, jiffies + msecs_to_jiffies(instance->poll_delay));
570 else
571 atm_warn(instance->usbatm, "Too many failures - disabling line status polling\n");
572}
573
574static void speedtch_resubmit_int(struct timer_list *t)
575{
576 struct speedtch_instance_data *instance = from_timer(instance, t,
577 resubmit_timer);
578 struct urb *int_urb = instance->int_urb;
579 int ret;
580
581 atm_dbg(instance->usbatm, "%s entered\n", __func__);
582
583 if (int_urb) {
584 ret = usb_submit_urb(int_urb, GFP_ATOMIC);
585 if (!ret)
586 schedule_work(&instance->status_check_work);
587 else {
588 atm_dbg(instance->usbatm, "%s: usb_submit_urb failed with result %d\n", __func__, ret);
589 mod_timer(&instance->resubmit_timer, jiffies + msecs_to_jiffies(RESUBMIT_DELAY));
590 }
591 }
592}
593
594static void speedtch_handle_int(struct urb *int_urb)
595{
596 struct speedtch_instance_data *instance = int_urb->context;
597 struct usbatm_data *usbatm = instance->usbatm;
598 unsigned int count = int_urb->actual_length;
599 int status = int_urb->status;
600 int ret;
601
602 /* The magic interrupt for "up state" */
603 static const unsigned char up_int[6] = { 0xa1, 0x00, 0x01, 0x00, 0x00, 0x00 };
604 /* The magic interrupt for "down state" */
605 static const unsigned char down_int[6] = { 0xa1, 0x00, 0x00, 0x00, 0x00, 0x00 };
606
607 atm_dbg(usbatm, "%s entered\n", __func__);
608
609 if (status < 0) {
610 atm_dbg(usbatm, "%s: nonzero urb status %d!\n", __func__, status);
611 goto fail;
612 }
613
614 if ((count == 6) && !memcmp(up_int, instance->int_data, 6)) {
615 del_timer(&instance->status_check_timer);
616 atm_info(usbatm, "DSL line goes up\n");
617 } else if ((count == 6) && !memcmp(down_int, instance->int_data, 6)) {
618 atm_info(usbatm, "DSL line goes down\n");
619 } else {
620 int i;
621
622 atm_dbg(usbatm, "%s: unknown interrupt packet of length %d:", __func__, count);
623 for (i = 0; i < count; i++)
624 printk(" %02x", instance->int_data[i]);
625 printk("\n");
626 goto fail;
627 }
628
629 int_urb = instance->int_urb;
630 if (int_urb) {
631 ret = usb_submit_urb(int_urb, GFP_ATOMIC);
632 schedule_work(&instance->status_check_work);
633 if (ret < 0) {
634 atm_dbg(usbatm, "%s: usb_submit_urb failed with result %d\n", __func__, ret);
635 goto fail;
636 }
637 }
638
639 return;
640
641fail:
642 int_urb = instance->int_urb;
643 if (int_urb)
644 mod_timer(&instance->resubmit_timer, jiffies + msecs_to_jiffies(RESUBMIT_DELAY));
645}
646
647static int speedtch_atm_start(struct usbatm_data *usbatm, struct atm_dev *atm_dev)
648{
649 struct usb_device *usb_dev = usbatm->usb_dev;
650 struct speedtch_instance_data *instance = usbatm->driver_data;
651 int i, ret;
652 unsigned char mac_str[13];
653
654 atm_dbg(usbatm, "%s entered\n", __func__);
655
656 /* Set MAC address, it is stored in the serial number */
657 memset(atm_dev->esi, 0, sizeof(atm_dev->esi));
658 if (usb_string(usb_dev, usb_dev->descriptor.iSerialNumber, mac_str, sizeof(mac_str)) == 12) {
659 for (i = 0; i < 6; i++)
660 atm_dev->esi[i] = (hex_to_bin(mac_str[i * 2]) << 4) +
661 hex_to_bin(mac_str[i * 2 + 1]);
662 }
663
664 /* Start modem synchronisation */
665 ret = speedtch_start_synchro(instance);
666
667 /* Set up interrupt endpoint */
668 if (instance->int_urb) {
669 ret = usb_submit_urb(instance->int_urb, GFP_KERNEL);
670 if (ret < 0) {
671 /* Doesn't matter; we'll poll anyway */
672 atm_dbg(usbatm, "%s: submission of interrupt URB failed (%d)!\n", __func__, ret);
673 usb_free_urb(instance->int_urb);
674 instance->int_urb = NULL;
675 }
676 }
677
678 /* Start status polling */
679 mod_timer(&instance->status_check_timer, jiffies + msecs_to_jiffies(1000));
680
681 return 0;
682}
683
684static void speedtch_atm_stop(struct usbatm_data *usbatm, struct atm_dev *atm_dev)
685{
686 struct speedtch_instance_data *instance = usbatm->driver_data;
687 struct urb *int_urb = instance->int_urb;
688
689 atm_dbg(usbatm, "%s entered\n", __func__);
690
691 del_timer_sync(&instance->status_check_timer);
692
693 /*
694 * Since resubmit_timer and int_urb can schedule themselves and
695 * each other, shutting them down correctly takes some care
696 */
697 instance->int_urb = NULL; /* signal shutdown */
698 mb();
699 usb_kill_urb(int_urb);
700 del_timer_sync(&instance->resubmit_timer);
701 /*
702 * At this point, speedtch_handle_int and speedtch_resubmit_int
703 * can run or be running, but instance->int_urb == NULL means that
704 * they will not reschedule
705 */
706 usb_kill_urb(int_urb);
707 del_timer_sync(&instance->resubmit_timer);
708 usb_free_urb(int_urb);
709
710 flush_work(&instance->status_check_work);
711}
712
713static int speedtch_pre_reset(struct usb_interface *intf)
714{
715 return 0;
716}
717
718static int speedtch_post_reset(struct usb_interface *intf)
719{
720 return 0;
721}
722
723
724/**********
725** USB **
726**********/
727
728static const struct usb_device_id speedtch_usb_ids[] = {
729 {USB_DEVICE(0x06b9, 0x4061)},
730 {}
731};
732
733MODULE_DEVICE_TABLE(usb, speedtch_usb_ids);
734
735static int speedtch_usb_probe(struct usb_interface *, const struct usb_device_id *);
736
737static struct usb_driver speedtch_usb_driver = {
738 .name = speedtch_driver_name,
739 .probe = speedtch_usb_probe,
740 .disconnect = usbatm_usb_disconnect,
741 .pre_reset = speedtch_pre_reset,
742 .post_reset = speedtch_post_reset,
743 .id_table = speedtch_usb_ids
744};
745
746static void speedtch_release_interfaces(struct usb_device *usb_dev,
747 int num_interfaces)
748{
749 struct usb_interface *cur_intf;
750 int i;
751
752 for (i = 0; i < num_interfaces; i++) {
753 cur_intf = usb_ifnum_to_if(usb_dev, i);
754 if (cur_intf) {
755 usb_set_intfdata(cur_intf, NULL);
756 usb_driver_release_interface(&speedtch_usb_driver, cur_intf);
757 }
758 }
759}
760
761static int speedtch_bind(struct usbatm_data *usbatm,
762 struct usb_interface *intf,
763 const struct usb_device_id *id)
764{
765 struct usb_device *usb_dev = interface_to_usbdev(intf);
766 struct usb_interface *cur_intf, *data_intf;
767 struct speedtch_instance_data *instance;
768 int ifnum = intf->altsetting->desc.bInterfaceNumber;
769 int num_interfaces = usb_dev->actconfig->desc.bNumInterfaces;
770 int i, ret;
771 int use_isoc;
772
773 usb_dbg(usbatm, "%s entered\n", __func__);
774
775 /* sanity checks */
776
777 if (usb_dev->descriptor.bDeviceClass != USB_CLASS_VENDOR_SPEC) {
778 usb_err(usbatm, "%s: wrong device class %d\n", __func__, usb_dev->descriptor.bDeviceClass);
779 return -ENODEV;
780 }
781
782 data_intf = usb_ifnum_to_if(usb_dev, INTERFACE_DATA);
783 if (!data_intf) {
784 usb_err(usbatm, "%s: data interface not found!\n", __func__);
785 return -ENODEV;
786 }
787
788 /* claim all interfaces */
789
790 for (i = 0; i < num_interfaces; i++) {
791 cur_intf = usb_ifnum_to_if(usb_dev, i);
792
793 if ((i != ifnum) && cur_intf) {
794 ret = usb_driver_claim_interface(&speedtch_usb_driver, cur_intf, usbatm);
795
796 if (ret < 0) {
797 usb_err(usbatm, "%s: failed to claim interface %2d (%d)!\n", __func__, i, ret);
798 speedtch_release_interfaces(usb_dev, i);
799 return ret;
800 }
801 }
802 }
803
804 instance = kzalloc(sizeof(*instance), GFP_KERNEL);
805
806 if (!instance) {
807 ret = -ENOMEM;
808 goto fail_release;
809 }
810
811 instance->usbatm = usbatm;
812
813 /* module parameters may change at any moment, so take a snapshot */
814 instance->params.altsetting = altsetting;
815 instance->params.BMaxDSL = BMaxDSL;
816 instance->params.ModemMode = ModemMode;
817 memcpy(instance->params.ModemOption, DEFAULT_MODEM_OPTION, MODEM_OPTION_LENGTH);
818 memcpy(instance->params.ModemOption, ModemOption, num_ModemOption);
819 use_isoc = enable_isoc;
820
821 if (instance->params.altsetting)
822 if ((ret = usb_set_interface(usb_dev, INTERFACE_DATA, instance->params.altsetting)) < 0) {
823 usb_err(usbatm, "%s: setting interface to %2d failed (%d)!\n", __func__, instance->params.altsetting, ret);
824 instance->params.altsetting = 0; /* fall back to default */
825 }
826
827 if (!instance->params.altsetting && use_isoc)
828 if ((ret = usb_set_interface(usb_dev, INTERFACE_DATA, DEFAULT_ISOC_ALTSETTING)) < 0) {
829 usb_dbg(usbatm, "%s: setting interface to %2d failed (%d)!\n", __func__, DEFAULT_ISOC_ALTSETTING, ret);
830 use_isoc = 0; /* fall back to bulk */
831 }
832
833 if (use_isoc) {
834 const struct usb_host_interface *desc = data_intf->cur_altsetting;
835 const __u8 target_address = USB_DIR_IN | usbatm->driver->isoc_in;
836
837 use_isoc = 0; /* fall back to bulk if endpoint not found */
838
839 for (i = 0; i < desc->desc.bNumEndpoints; i++) {
840 const struct usb_endpoint_descriptor *endpoint_desc = &desc->endpoint[i].desc;
841
842 if ((endpoint_desc->bEndpointAddress == target_address)) {
843 use_isoc =
844 usb_endpoint_xfer_isoc(endpoint_desc);
845 break;
846 }
847 }
848
849 if (!use_isoc)
850 usb_info(usbatm, "isochronous transfer not supported - using bulk\n");
851 }
852
853 if (!use_isoc && !instance->params.altsetting)
854 if ((ret = usb_set_interface(usb_dev, INTERFACE_DATA, DEFAULT_BULK_ALTSETTING)) < 0) {
855 usb_err(usbatm, "%s: setting interface to %2d failed (%d)!\n", __func__, DEFAULT_BULK_ALTSETTING, ret);
856 goto fail_free;
857 }
858
859 if (!instance->params.altsetting)
860 instance->params.altsetting = use_isoc ? DEFAULT_ISOC_ALTSETTING : DEFAULT_BULK_ALTSETTING;
861
862 usbatm->flags |= (use_isoc ? UDSL_USE_ISOC : 0);
863
864 INIT_WORK(&instance->status_check_work, speedtch_check_status);
865 timer_setup(&instance->status_check_timer, speedtch_status_poll, 0);
866 instance->last_status = 0xff;
867 instance->poll_delay = MIN_POLL_DELAY;
868
869 timer_setup(&instance->resubmit_timer, speedtch_resubmit_int, 0);
870
871 instance->int_urb = usb_alloc_urb(0, GFP_KERNEL);
872
873 if (instance->int_urb)
874 usb_fill_int_urb(instance->int_urb, usb_dev,
875 usb_rcvintpipe(usb_dev, ENDPOINT_INT),
876 instance->int_data, sizeof(instance->int_data),
877 speedtch_handle_int, instance, 16);
878 else
879 usb_dbg(usbatm, "%s: no memory for interrupt urb!\n", __func__);
880
881 /* check whether the modem already seems to be alive */
882 ret = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0),
883 0x12, 0xc0, 0x07, 0x00,
884 instance->scratch_buffer + OFFSET_7, SIZE_7, 500);
885
886 usbatm->flags |= (ret == SIZE_7 ? UDSL_SKIP_HEAVY_INIT : 0);
887
888 usb_dbg(usbatm, "%s: firmware %s loaded\n", __func__, usbatm->flags & UDSL_SKIP_HEAVY_INIT ? "already" : "not");
889
890 if (!(usbatm->flags & UDSL_SKIP_HEAVY_INIT))
891 if ((ret = usb_reset_device(usb_dev)) < 0) {
892 usb_err(usbatm, "%s: device reset failed (%d)!\n", __func__, ret);
893 goto fail_free;
894 }
895
896 usbatm->driver_data = instance;
897
898 return 0;
899
900fail_free:
901 usb_free_urb(instance->int_urb);
902 kfree(instance);
903fail_release:
904 speedtch_release_interfaces(usb_dev, num_interfaces);
905 return ret;
906}
907
908static void speedtch_unbind(struct usbatm_data *usbatm, struct usb_interface *intf)
909{
910 struct usb_device *usb_dev = interface_to_usbdev(intf);
911 struct speedtch_instance_data *instance = usbatm->driver_data;
912
913 usb_dbg(usbatm, "%s entered\n", __func__);
914
915 speedtch_release_interfaces(usb_dev, usb_dev->actconfig->desc.bNumInterfaces);
916 usb_free_urb(instance->int_urb);
917 kfree(instance);
918}
919
920
921/***********
922** init **
923***********/
924
925static struct usbatm_driver speedtch_usbatm_driver = {
926 .driver_name = speedtch_driver_name,
927 .bind = speedtch_bind,
928 .heavy_init = speedtch_heavy_init,
929 .unbind = speedtch_unbind,
930 .atm_start = speedtch_atm_start,
931 .atm_stop = speedtch_atm_stop,
932 .bulk_in = ENDPOINT_BULK_DATA,
933 .bulk_out = ENDPOINT_BULK_DATA,
934 .isoc_in = ENDPOINT_ISOC_DATA
935};
936
937static int speedtch_usb_probe(struct usb_interface *intf, const struct usb_device_id *id)
938{
939 return usbatm_usb_probe(intf, id, &speedtch_usbatm_driver);
940}
941
942module_usb_driver(speedtch_usb_driver);
943
944MODULE_AUTHOR(DRIVER_AUTHOR);
945MODULE_DESCRIPTION(DRIVER_DESC);
946MODULE_LICENSE("GPL");
1/******************************************************************************
2 * speedtch.c - Alcatel SpeedTouch USB xDSL modem driver
3 *
4 * Copyright (C) 2001, Alcatel
5 * Copyright (C) 2003, Duncan Sands
6 * Copyright (C) 2004, David Woodhouse
7 *
8 * Based on "modem_run.c", copyright (C) 2001, Benoit Papillault
9 *
10 * This program is free software; you can redistribute it and/or modify it
11 * under the terms of the GNU General Public License as published by the Free
12 * Software Foundation; either version 2 of the License, or (at your option)
13 * any later version.
14 *
15 * This program is distributed in the hope that it will be useful, but WITHOUT
16 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
17 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
18 * more details.
19 *
20 * You should have received a copy of the GNU General Public License along with
21 * this program; if not, write to the Free Software Foundation, Inc., 59
22 * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
23 *
24 ******************************************************************************/
25
26#include <asm/page.h>
27#include <linux/device.h>
28#include <linux/errno.h>
29#include <linux/firmware.h>
30#include <linux/kernel.h>
31#include <linux/module.h>
32#include <linux/moduleparam.h>
33#include <linux/slab.h>
34#include <linux/stat.h>
35#include <linux/timer.h>
36#include <linux/types.h>
37#include <linux/usb/ch9.h>
38#include <linux/workqueue.h>
39
40#include "usbatm.h"
41
42#define DRIVER_AUTHOR "Johan Verrept, Duncan Sands <duncan.sands@free.fr>"
43#define DRIVER_VERSION "1.10"
44#define DRIVER_DESC "Alcatel SpeedTouch USB driver version " DRIVER_VERSION
45
46static const char speedtch_driver_name[] = "speedtch";
47
48#define CTRL_TIMEOUT 2000 /* milliseconds */
49#define DATA_TIMEOUT 2000 /* milliseconds */
50
51#define OFFSET_7 0 /* size 1 */
52#define OFFSET_b 1 /* size 8 */
53#define OFFSET_d 9 /* size 4 */
54#define OFFSET_e 13 /* size 1 */
55#define OFFSET_f 14 /* size 1 */
56
57#define SIZE_7 1
58#define SIZE_b 8
59#define SIZE_d 4
60#define SIZE_e 1
61#define SIZE_f 1
62
63#define MIN_POLL_DELAY 5000 /* milliseconds */
64#define MAX_POLL_DELAY 60000 /* milliseconds */
65
66#define RESUBMIT_DELAY 1000 /* milliseconds */
67
68#define DEFAULT_BULK_ALTSETTING 1
69#define DEFAULT_ISOC_ALTSETTING 3
70#define DEFAULT_DL_512_FIRST 0
71#define DEFAULT_ENABLE_ISOC 0
72#define DEFAULT_SW_BUFFERING 0
73
74static unsigned int altsetting = 0; /* zero means: use the default */
75static bool dl_512_first = DEFAULT_DL_512_FIRST;
76static bool enable_isoc = DEFAULT_ENABLE_ISOC;
77static bool sw_buffering = DEFAULT_SW_BUFFERING;
78
79#define DEFAULT_B_MAX_DSL 8128
80#define DEFAULT_MODEM_MODE 11
81#define MODEM_OPTION_LENGTH 16
82static const unsigned char DEFAULT_MODEM_OPTION[MODEM_OPTION_LENGTH] = {
83 0x10, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
84};
85
86static unsigned int BMaxDSL = DEFAULT_B_MAX_DSL;
87static unsigned char ModemMode = DEFAULT_MODEM_MODE;
88static unsigned char ModemOption[MODEM_OPTION_LENGTH];
89static unsigned int num_ModemOption;
90
91module_param(altsetting, uint, S_IRUGO | S_IWUSR);
92MODULE_PARM_DESC(altsetting,
93 "Alternative setting for data interface (bulk_default: "
94 __MODULE_STRING(DEFAULT_BULK_ALTSETTING) "; isoc_default: "
95 __MODULE_STRING(DEFAULT_ISOC_ALTSETTING) ")");
96
97module_param(dl_512_first, bool, S_IRUGO | S_IWUSR);
98MODULE_PARM_DESC(dl_512_first,
99 "Read 512 bytes before sending firmware (default: "
100 __MODULE_STRING(DEFAULT_DL_512_FIRST) ")");
101
102module_param(enable_isoc, bool, S_IRUGO | S_IWUSR);
103MODULE_PARM_DESC(enable_isoc,
104 "Use isochronous transfers if available (default: "
105 __MODULE_STRING(DEFAULT_ENABLE_ISOC) ")");
106
107module_param(sw_buffering, bool, S_IRUGO | S_IWUSR);
108MODULE_PARM_DESC(sw_buffering,
109 "Enable software buffering (default: "
110 __MODULE_STRING(DEFAULT_SW_BUFFERING) ")");
111
112module_param(BMaxDSL, uint, S_IRUGO | S_IWUSR);
113MODULE_PARM_DESC(BMaxDSL,
114 "default: " __MODULE_STRING(DEFAULT_B_MAX_DSL));
115
116module_param(ModemMode, byte, S_IRUGO | S_IWUSR);
117MODULE_PARM_DESC(ModemMode,
118 "default: " __MODULE_STRING(DEFAULT_MODEM_MODE));
119
120module_param_array(ModemOption, byte, &num_ModemOption, S_IRUGO);
121MODULE_PARM_DESC(ModemOption, "default: 0x10,0x00,0x00,0x00,0x20");
122
123#define INTERFACE_DATA 1
124#define ENDPOINT_INT 0x81
125#define ENDPOINT_BULK_DATA 0x07
126#define ENDPOINT_ISOC_DATA 0x07
127#define ENDPOINT_FIRMWARE 0x05
128
129struct speedtch_params {
130 unsigned int altsetting;
131 unsigned int BMaxDSL;
132 unsigned char ModemMode;
133 unsigned char ModemOption[MODEM_OPTION_LENGTH];
134};
135
136struct speedtch_instance_data {
137 struct usbatm_data *usbatm;
138
139 struct speedtch_params params; /* set in probe, constant afterwards */
140
141 struct timer_list status_check_timer;
142 struct work_struct status_check_work;
143
144 unsigned char last_status;
145
146 int poll_delay; /* milliseconds */
147
148 struct timer_list resubmit_timer;
149 struct urb *int_urb;
150 unsigned char int_data[16];
151
152 unsigned char scratch_buffer[16];
153};
154
155/***************
156** firmware **
157***************/
158
159static void speedtch_set_swbuff(struct speedtch_instance_data *instance, int state)
160{
161 struct usbatm_data *usbatm = instance->usbatm;
162 struct usb_device *usb_dev = usbatm->usb_dev;
163 int ret;
164
165 ret = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0),
166 0x32, 0x40, state ? 0x01 : 0x00, 0x00, NULL, 0, CTRL_TIMEOUT);
167 if (ret < 0)
168 usb_warn(usbatm,
169 "%sabling SW buffering: usb_control_msg returned %d\n",
170 state ? "En" : "Dis", ret);
171 else
172 usb_dbg(usbatm, "speedtch_set_swbuff: %sbled SW buffering\n", state ? "En" : "Dis");
173}
174
175static void speedtch_test_sequence(struct speedtch_instance_data *instance)
176{
177 struct usbatm_data *usbatm = instance->usbatm;
178 struct usb_device *usb_dev = usbatm->usb_dev;
179 unsigned char *buf = instance->scratch_buffer;
180 int ret;
181
182 /* URB 147 */
183 buf[0] = 0x1c;
184 buf[1] = 0x50;
185 ret = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0),
186 0x01, 0x40, 0x0b, 0x00, buf, 2, CTRL_TIMEOUT);
187 if (ret < 0)
188 usb_warn(usbatm, "%s failed on URB147: %d\n", __func__, ret);
189
190 /* URB 148 */
191 buf[0] = 0x32;
192 buf[1] = 0x00;
193 ret = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0),
194 0x01, 0x40, 0x02, 0x00, buf, 2, CTRL_TIMEOUT);
195 if (ret < 0)
196 usb_warn(usbatm, "%s failed on URB148: %d\n", __func__, ret);
197
198 /* URB 149 */
199 buf[0] = 0x01;
200 buf[1] = 0x00;
201 buf[2] = 0x01;
202 ret = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0),
203 0x01, 0x40, 0x03, 0x00, buf, 3, CTRL_TIMEOUT);
204 if (ret < 0)
205 usb_warn(usbatm, "%s failed on URB149: %d\n", __func__, ret);
206
207 /* URB 150 */
208 buf[0] = 0x01;
209 buf[1] = 0x00;
210 buf[2] = 0x01;
211 ret = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0),
212 0x01, 0x40, 0x04, 0x00, buf, 3, CTRL_TIMEOUT);
213 if (ret < 0)
214 usb_warn(usbatm, "%s failed on URB150: %d\n", __func__, ret);
215
216 /* Extra initialisation in recent drivers - gives higher speeds */
217
218 /* URBext1 */
219 buf[0] = instance->params.ModemMode;
220 ret = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0),
221 0x01, 0x40, 0x11, 0x00, buf, 1, CTRL_TIMEOUT);
222 if (ret < 0)
223 usb_warn(usbatm, "%s failed on URBext1: %d\n", __func__, ret);
224
225 /* URBext2 */
226 /* This seems to be the one which actually triggers the higher sync
227 rate -- it does require the new firmware too, although it works OK
228 with older firmware */
229 ret = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0),
230 0x01, 0x40, 0x14, 0x00,
231 instance->params.ModemOption,
232 MODEM_OPTION_LENGTH, CTRL_TIMEOUT);
233 if (ret < 0)
234 usb_warn(usbatm, "%s failed on URBext2: %d\n", __func__, ret);
235
236 /* URBext3 */
237 buf[0] = instance->params.BMaxDSL & 0xff;
238 buf[1] = instance->params.BMaxDSL >> 8;
239 ret = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0),
240 0x01, 0x40, 0x12, 0x00, buf, 2, CTRL_TIMEOUT);
241 if (ret < 0)
242 usb_warn(usbatm, "%s failed on URBext3: %d\n", __func__, ret);
243}
244
245static int speedtch_upload_firmware(struct speedtch_instance_data *instance,
246 const struct firmware *fw1,
247 const struct firmware *fw2)
248{
249 unsigned char *buffer;
250 struct usbatm_data *usbatm = instance->usbatm;
251 struct usb_device *usb_dev = usbatm->usb_dev;
252 int actual_length;
253 int ret = 0;
254 int offset;
255
256 usb_dbg(usbatm, "%s entered\n", __func__);
257
258 if (!(buffer = (unsigned char *)__get_free_page(GFP_KERNEL))) {
259 ret = -ENOMEM;
260 usb_dbg(usbatm, "%s: no memory for buffer!\n", __func__);
261 goto out;
262 }
263
264 if (!usb_ifnum_to_if(usb_dev, 2)) {
265 ret = -ENODEV;
266 usb_dbg(usbatm, "%s: interface not found!\n", __func__);
267 goto out_free;
268 }
269
270 /* URB 7 */
271 if (dl_512_first) { /* some modems need a read before writing the firmware */
272 ret = usb_bulk_msg(usb_dev, usb_rcvbulkpipe(usb_dev, ENDPOINT_FIRMWARE),
273 buffer, 0x200, &actual_length, 2000);
274
275 if (ret < 0 && ret != -ETIMEDOUT)
276 usb_warn(usbatm, "%s: read BLOCK0 from modem failed (%d)!\n", __func__, ret);
277 else
278 usb_dbg(usbatm, "%s: BLOCK0 downloaded (%d bytes)\n", __func__, ret);
279 }
280
281 /* URB 8 : both leds are static green */
282 for (offset = 0; offset < fw1->size; offset += PAGE_SIZE) {
283 int thislen = min_t(int, PAGE_SIZE, fw1->size - offset);
284 memcpy(buffer, fw1->data + offset, thislen);
285
286 ret = usb_bulk_msg(usb_dev, usb_sndbulkpipe(usb_dev, ENDPOINT_FIRMWARE),
287 buffer, thislen, &actual_length, DATA_TIMEOUT);
288
289 if (ret < 0) {
290 usb_err(usbatm, "%s: write BLOCK1 to modem failed (%d)!\n", __func__, ret);
291 goto out_free;
292 }
293 usb_dbg(usbatm, "%s: BLOCK1 uploaded (%zu bytes)\n", __func__, fw1->size);
294 }
295
296 /* USB led blinking green, ADSL led off */
297
298 /* URB 11 */
299 ret = usb_bulk_msg(usb_dev, usb_rcvbulkpipe(usb_dev, ENDPOINT_FIRMWARE),
300 buffer, 0x200, &actual_length, DATA_TIMEOUT);
301
302 if (ret < 0) {
303 usb_err(usbatm, "%s: read BLOCK2 from modem failed (%d)!\n", __func__, ret);
304 goto out_free;
305 }
306 usb_dbg(usbatm, "%s: BLOCK2 downloaded (%d bytes)\n", __func__, actual_length);
307
308 /* URBs 12 to 139 - USB led blinking green, ADSL led off */
309 for (offset = 0; offset < fw2->size; offset += PAGE_SIZE) {
310 int thislen = min_t(int, PAGE_SIZE, fw2->size - offset);
311 memcpy(buffer, fw2->data + offset, thislen);
312
313 ret = usb_bulk_msg(usb_dev, usb_sndbulkpipe(usb_dev, ENDPOINT_FIRMWARE),
314 buffer, thislen, &actual_length, DATA_TIMEOUT);
315
316 if (ret < 0) {
317 usb_err(usbatm, "%s: write BLOCK3 to modem failed (%d)!\n", __func__, ret);
318 goto out_free;
319 }
320 }
321 usb_dbg(usbatm, "%s: BLOCK3 uploaded (%zu bytes)\n", __func__, fw2->size);
322
323 /* USB led static green, ADSL led static red */
324
325 /* URB 142 */
326 ret = usb_bulk_msg(usb_dev, usb_rcvbulkpipe(usb_dev, ENDPOINT_FIRMWARE),
327 buffer, 0x200, &actual_length, DATA_TIMEOUT);
328
329 if (ret < 0) {
330 usb_err(usbatm, "%s: read BLOCK4 from modem failed (%d)!\n", __func__, ret);
331 goto out_free;
332 }
333
334 /* success */
335 usb_dbg(usbatm, "%s: BLOCK4 downloaded (%d bytes)\n", __func__, actual_length);
336
337 /* Delay to allow firmware to start up. We can do this here
338 because we're in our own kernel thread anyway. */
339 msleep_interruptible(1000);
340
341 if ((ret = usb_set_interface(usb_dev, INTERFACE_DATA, instance->params.altsetting)) < 0) {
342 usb_err(usbatm, "%s: setting interface to %d failed (%d)!\n", __func__, instance->params.altsetting, ret);
343 goto out_free;
344 }
345
346 /* Enable software buffering, if requested */
347 if (sw_buffering)
348 speedtch_set_swbuff(instance, 1);
349
350 /* Magic spell; don't ask us what this does */
351 speedtch_test_sequence(instance);
352
353 ret = 0;
354
355out_free:
356 free_page((unsigned long)buffer);
357out:
358 return ret;
359}
360
361static int speedtch_find_firmware(struct usbatm_data *usbatm, struct usb_interface *intf,
362 int phase, const struct firmware **fw_p)
363{
364 struct device *dev = &intf->dev;
365 const u16 bcdDevice = le16_to_cpu(interface_to_usbdev(intf)->descriptor.bcdDevice);
366 const u8 major_revision = bcdDevice >> 8;
367 const u8 minor_revision = bcdDevice & 0xff;
368 char buf[24];
369
370 sprintf(buf, "speedtch-%d.bin.%x.%02x", phase, major_revision, minor_revision);
371 usb_dbg(usbatm, "%s: looking for %s\n", __func__, buf);
372
373 if (request_firmware(fw_p, buf, dev)) {
374 sprintf(buf, "speedtch-%d.bin.%x", phase, major_revision);
375 usb_dbg(usbatm, "%s: looking for %s\n", __func__, buf);
376
377 if (request_firmware(fw_p, buf, dev)) {
378 sprintf(buf, "speedtch-%d.bin", phase);
379 usb_dbg(usbatm, "%s: looking for %s\n", __func__, buf);
380
381 if (request_firmware(fw_p, buf, dev)) {
382 usb_err(usbatm, "%s: no stage %d firmware found!\n", __func__, phase);
383 return -ENOENT;
384 }
385 }
386 }
387
388 usb_info(usbatm, "found stage %d firmware %s\n", phase, buf);
389
390 return 0;
391}
392
393static int speedtch_heavy_init(struct usbatm_data *usbatm, struct usb_interface *intf)
394{
395 const struct firmware *fw1, *fw2;
396 struct speedtch_instance_data *instance = usbatm->driver_data;
397 int ret;
398
399 if ((ret = speedtch_find_firmware(usbatm, intf, 1, &fw1)) < 0)
400 return ret;
401
402 if ((ret = speedtch_find_firmware(usbatm, intf, 2, &fw2)) < 0) {
403 release_firmware(fw1);
404 return ret;
405 }
406
407 if ((ret = speedtch_upload_firmware(instance, fw1, fw2)) < 0)
408 usb_err(usbatm, "%s: firmware upload failed (%d)!\n", __func__, ret);
409
410 release_firmware(fw2);
411 release_firmware(fw1);
412
413 return ret;
414}
415
416
417/**********
418** ATM **
419**********/
420
421static int speedtch_read_status(struct speedtch_instance_data *instance)
422{
423 struct usbatm_data *usbatm = instance->usbatm;
424 struct usb_device *usb_dev = usbatm->usb_dev;
425 unsigned char *buf = instance->scratch_buffer;
426 int ret;
427
428 memset(buf, 0, 16);
429
430 ret = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0),
431 0x12, 0xc0, 0x07, 0x00, buf + OFFSET_7, SIZE_7,
432 CTRL_TIMEOUT);
433 if (ret < 0) {
434 atm_dbg(usbatm, "%s: MSG 7 failed\n", __func__);
435 return ret;
436 }
437
438 ret = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0),
439 0x12, 0xc0, 0x0b, 0x00, buf + OFFSET_b, SIZE_b,
440 CTRL_TIMEOUT);
441 if (ret < 0) {
442 atm_dbg(usbatm, "%s: MSG B failed\n", __func__);
443 return ret;
444 }
445
446 ret = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0),
447 0x12, 0xc0, 0x0d, 0x00, buf + OFFSET_d, SIZE_d,
448 CTRL_TIMEOUT);
449 if (ret < 0) {
450 atm_dbg(usbatm, "%s: MSG D failed\n", __func__);
451 return ret;
452 }
453
454 ret = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0),
455 0x01, 0xc0, 0x0e, 0x00, buf + OFFSET_e, SIZE_e,
456 CTRL_TIMEOUT);
457 if (ret < 0) {
458 atm_dbg(usbatm, "%s: MSG E failed\n", __func__);
459 return ret;
460 }
461
462 ret = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0),
463 0x01, 0xc0, 0x0f, 0x00, buf + OFFSET_f, SIZE_f,
464 CTRL_TIMEOUT);
465 if (ret < 0) {
466 atm_dbg(usbatm, "%s: MSG F failed\n", __func__);
467 return ret;
468 }
469
470 return 0;
471}
472
473static int speedtch_start_synchro(struct speedtch_instance_data *instance)
474{
475 struct usbatm_data *usbatm = instance->usbatm;
476 struct usb_device *usb_dev = usbatm->usb_dev;
477 unsigned char *buf = instance->scratch_buffer;
478 int ret;
479
480 atm_dbg(usbatm, "%s entered\n", __func__);
481
482 memset(buf, 0, 2);
483
484 ret = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0),
485 0x12, 0xc0, 0x04, 0x00,
486 buf, 2, CTRL_TIMEOUT);
487
488 if (ret < 0)
489 atm_warn(usbatm, "failed to start ADSL synchronisation: %d\n", ret);
490 else
491 atm_dbg(usbatm, "%s: modem prodded. %d bytes returned: %02x %02x\n",
492 __func__, ret, buf[0], buf[1]);
493
494 return ret;
495}
496
497static void speedtch_check_status(struct work_struct *work)
498{
499 struct speedtch_instance_data *instance =
500 container_of(work, struct speedtch_instance_data,
501 status_check_work);
502 struct usbatm_data *usbatm = instance->usbatm;
503 struct atm_dev *atm_dev = usbatm->atm_dev;
504 unsigned char *buf = instance->scratch_buffer;
505 int down_speed, up_speed, ret;
506 unsigned char status;
507
508#ifdef VERBOSE_DEBUG
509 atm_dbg(usbatm, "%s entered\n", __func__);
510#endif
511
512 ret = speedtch_read_status(instance);
513 if (ret < 0) {
514 atm_warn(usbatm, "error %d fetching device status\n", ret);
515 instance->poll_delay = min(2 * instance->poll_delay, MAX_POLL_DELAY);
516 return;
517 }
518
519 instance->poll_delay = max(instance->poll_delay / 2, MIN_POLL_DELAY);
520
521 status = buf[OFFSET_7];
522
523 if ((status != instance->last_status) || !status) {
524 atm_dbg(usbatm, "%s: line state 0x%02x\n", __func__, status);
525
526 switch (status) {
527 case 0:
528 atm_dev_signal_change(atm_dev, ATM_PHY_SIG_LOST);
529 if (instance->last_status)
530 atm_info(usbatm, "ADSL line is down\n");
531 /* It may never resync again unless we ask it to... */
532 ret = speedtch_start_synchro(instance);
533 break;
534
535 case 0x08:
536 atm_dev_signal_change(atm_dev, ATM_PHY_SIG_UNKNOWN);
537 atm_info(usbatm, "ADSL line is blocked?\n");
538 break;
539
540 case 0x10:
541 atm_dev_signal_change(atm_dev, ATM_PHY_SIG_LOST);
542 atm_info(usbatm, "ADSL line is synchronising\n");
543 break;
544
545 case 0x20:
546 down_speed = buf[OFFSET_b] | (buf[OFFSET_b + 1] << 8)
547 | (buf[OFFSET_b + 2] << 16) | (buf[OFFSET_b + 3] << 24);
548 up_speed = buf[OFFSET_b + 4] | (buf[OFFSET_b + 5] << 8)
549 | (buf[OFFSET_b + 6] << 16) | (buf[OFFSET_b + 7] << 24);
550
551 if (!(down_speed & 0x0000ffff) && !(up_speed & 0x0000ffff)) {
552 down_speed >>= 16;
553 up_speed >>= 16;
554 }
555
556 atm_dev->link_rate = down_speed * 1000 / 424;
557 atm_dev_signal_change(atm_dev, ATM_PHY_SIG_FOUND);
558
559 atm_info(usbatm,
560 "ADSL line is up (%d kb/s down | %d kb/s up)\n",
561 down_speed, up_speed);
562 break;
563
564 default:
565 atm_dev_signal_change(atm_dev, ATM_PHY_SIG_UNKNOWN);
566 atm_info(usbatm, "unknown line state %02x\n", status);
567 break;
568 }
569
570 instance->last_status = status;
571 }
572}
573
574static void speedtch_status_poll(unsigned long data)
575{
576 struct speedtch_instance_data *instance = (void *)data;
577
578 schedule_work(&instance->status_check_work);
579
580 /* The following check is racy, but the race is harmless */
581 if (instance->poll_delay < MAX_POLL_DELAY)
582 mod_timer(&instance->status_check_timer, jiffies + msecs_to_jiffies(instance->poll_delay));
583 else
584 atm_warn(instance->usbatm, "Too many failures - disabling line status polling\n");
585}
586
587static void speedtch_resubmit_int(unsigned long data)
588{
589 struct speedtch_instance_data *instance = (void *)data;
590 struct urb *int_urb = instance->int_urb;
591 int ret;
592
593 atm_dbg(instance->usbatm, "%s entered\n", __func__);
594
595 if (int_urb) {
596 ret = usb_submit_urb(int_urb, GFP_ATOMIC);
597 if (!ret)
598 schedule_work(&instance->status_check_work);
599 else {
600 atm_dbg(instance->usbatm, "%s: usb_submit_urb failed with result %d\n", __func__, ret);
601 mod_timer(&instance->resubmit_timer, jiffies + msecs_to_jiffies(RESUBMIT_DELAY));
602 }
603 }
604}
605
606static void speedtch_handle_int(struct urb *int_urb)
607{
608 struct speedtch_instance_data *instance = int_urb->context;
609 struct usbatm_data *usbatm = instance->usbatm;
610 unsigned int count = int_urb->actual_length;
611 int status = int_urb->status;
612 int ret;
613
614 /* The magic interrupt for "up state" */
615 static const unsigned char up_int[6] = { 0xa1, 0x00, 0x01, 0x00, 0x00, 0x00 };
616 /* The magic interrupt for "down state" */
617 static const unsigned char down_int[6] = { 0xa1, 0x00, 0x00, 0x00, 0x00, 0x00 };
618
619 atm_dbg(usbatm, "%s entered\n", __func__);
620
621 if (status < 0) {
622 atm_dbg(usbatm, "%s: nonzero urb status %d!\n", __func__, status);
623 goto fail;
624 }
625
626 if ((count == 6) && !memcmp(up_int, instance->int_data, 6)) {
627 del_timer(&instance->status_check_timer);
628 atm_info(usbatm, "DSL line goes up\n");
629 } else if ((count == 6) && !memcmp(down_int, instance->int_data, 6)) {
630 atm_info(usbatm, "DSL line goes down\n");
631 } else {
632 int i;
633
634 atm_dbg(usbatm, "%s: unknown interrupt packet of length %d:", __func__, count);
635 for (i = 0; i < count; i++)
636 printk(" %02x", instance->int_data[i]);
637 printk("\n");
638 goto fail;
639 }
640
641 if ((int_urb = instance->int_urb)) {
642 ret = usb_submit_urb(int_urb, GFP_ATOMIC);
643 schedule_work(&instance->status_check_work);
644 if (ret < 0) {
645 atm_dbg(usbatm, "%s: usb_submit_urb failed with result %d\n", __func__, ret);
646 goto fail;
647 }
648 }
649
650 return;
651
652fail:
653 if ((int_urb = instance->int_urb))
654 mod_timer(&instance->resubmit_timer, jiffies + msecs_to_jiffies(RESUBMIT_DELAY));
655}
656
657static int speedtch_atm_start(struct usbatm_data *usbatm, struct atm_dev *atm_dev)
658{
659 struct usb_device *usb_dev = usbatm->usb_dev;
660 struct speedtch_instance_data *instance = usbatm->driver_data;
661 int i, ret;
662 unsigned char mac_str[13];
663
664 atm_dbg(usbatm, "%s entered\n", __func__);
665
666 /* Set MAC address, it is stored in the serial number */
667 memset(atm_dev->esi, 0, sizeof(atm_dev->esi));
668 if (usb_string(usb_dev, usb_dev->descriptor.iSerialNumber, mac_str, sizeof(mac_str)) == 12) {
669 for (i = 0; i < 6; i++)
670 atm_dev->esi[i] = (hex_to_bin(mac_str[i * 2]) << 4) +
671 hex_to_bin(mac_str[i * 2 + 1]);
672 }
673
674 /* Start modem synchronisation */
675 ret = speedtch_start_synchro(instance);
676
677 /* Set up interrupt endpoint */
678 if (instance->int_urb) {
679 ret = usb_submit_urb(instance->int_urb, GFP_KERNEL);
680 if (ret < 0) {
681 /* Doesn't matter; we'll poll anyway */
682 atm_dbg(usbatm, "%s: submission of interrupt URB failed (%d)!\n", __func__, ret);
683 usb_free_urb(instance->int_urb);
684 instance->int_urb = NULL;
685 }
686 }
687
688 /* Start status polling */
689 mod_timer(&instance->status_check_timer, jiffies + msecs_to_jiffies(1000));
690
691 return 0;
692}
693
694static void speedtch_atm_stop(struct usbatm_data *usbatm, struct atm_dev *atm_dev)
695{
696 struct speedtch_instance_data *instance = usbatm->driver_data;
697 struct urb *int_urb = instance->int_urb;
698
699 atm_dbg(usbatm, "%s entered\n", __func__);
700
701 del_timer_sync(&instance->status_check_timer);
702
703 /*
704 * Since resubmit_timer and int_urb can schedule themselves and
705 * each other, shutting them down correctly takes some care
706 */
707 instance->int_urb = NULL; /* signal shutdown */
708 mb();
709 usb_kill_urb(int_urb);
710 del_timer_sync(&instance->resubmit_timer);
711 /*
712 * At this point, speedtch_handle_int and speedtch_resubmit_int
713 * can run or be running, but instance->int_urb == NULL means that
714 * they will not reschedule
715 */
716 usb_kill_urb(int_urb);
717 del_timer_sync(&instance->resubmit_timer);
718 usb_free_urb(int_urb);
719
720 flush_work(&instance->status_check_work);
721}
722
723static int speedtch_pre_reset(struct usb_interface *intf)
724{
725 return 0;
726}
727
728static int speedtch_post_reset(struct usb_interface *intf)
729{
730 return 0;
731}
732
733
734/**********
735** USB **
736**********/
737
738static struct usb_device_id speedtch_usb_ids[] = {
739 {USB_DEVICE(0x06b9, 0x4061)},
740 {}
741};
742
743MODULE_DEVICE_TABLE(usb, speedtch_usb_ids);
744
745static int speedtch_usb_probe(struct usb_interface *, const struct usb_device_id *);
746
747static struct usb_driver speedtch_usb_driver = {
748 .name = speedtch_driver_name,
749 .probe = speedtch_usb_probe,
750 .disconnect = usbatm_usb_disconnect,
751 .pre_reset = speedtch_pre_reset,
752 .post_reset = speedtch_post_reset,
753 .id_table = speedtch_usb_ids
754};
755
756static void speedtch_release_interfaces(struct usb_device *usb_dev,
757 int num_interfaces)
758{
759 struct usb_interface *cur_intf;
760 int i;
761
762 for (i = 0; i < num_interfaces; i++)
763 if ((cur_intf = usb_ifnum_to_if(usb_dev, i))) {
764 usb_set_intfdata(cur_intf, NULL);
765 usb_driver_release_interface(&speedtch_usb_driver, cur_intf);
766 }
767}
768
769static int speedtch_bind(struct usbatm_data *usbatm,
770 struct usb_interface *intf,
771 const struct usb_device_id *id)
772{
773 struct usb_device *usb_dev = interface_to_usbdev(intf);
774 struct usb_interface *cur_intf, *data_intf;
775 struct speedtch_instance_data *instance;
776 int ifnum = intf->altsetting->desc.bInterfaceNumber;
777 int num_interfaces = usb_dev->actconfig->desc.bNumInterfaces;
778 int i, ret;
779 int use_isoc;
780
781 usb_dbg(usbatm, "%s entered\n", __func__);
782
783 /* sanity checks */
784
785 if (usb_dev->descriptor.bDeviceClass != USB_CLASS_VENDOR_SPEC) {
786 usb_err(usbatm, "%s: wrong device class %d\n", __func__, usb_dev->descriptor.bDeviceClass);
787 return -ENODEV;
788 }
789
790 if (!(data_intf = usb_ifnum_to_if(usb_dev, INTERFACE_DATA))) {
791 usb_err(usbatm, "%s: data interface not found!\n", __func__);
792 return -ENODEV;
793 }
794
795 /* claim all interfaces */
796
797 for (i = 0; i < num_interfaces; i++) {
798 cur_intf = usb_ifnum_to_if(usb_dev, i);
799
800 if ((i != ifnum) && cur_intf) {
801 ret = usb_driver_claim_interface(&speedtch_usb_driver, cur_intf, usbatm);
802
803 if (ret < 0) {
804 usb_err(usbatm, "%s: failed to claim interface %2d (%d)!\n", __func__, i, ret);
805 speedtch_release_interfaces(usb_dev, i);
806 return ret;
807 }
808 }
809 }
810
811 instance = kzalloc(sizeof(*instance), GFP_KERNEL);
812
813 if (!instance) {
814 usb_err(usbatm, "%s: no memory for instance data!\n", __func__);
815 ret = -ENOMEM;
816 goto fail_release;
817 }
818
819 instance->usbatm = usbatm;
820
821 /* module parameters may change at any moment, so take a snapshot */
822 instance->params.altsetting = altsetting;
823 instance->params.BMaxDSL = BMaxDSL;
824 instance->params.ModemMode = ModemMode;
825 memcpy(instance->params.ModemOption, DEFAULT_MODEM_OPTION, MODEM_OPTION_LENGTH);
826 memcpy(instance->params.ModemOption, ModemOption, num_ModemOption);
827 use_isoc = enable_isoc;
828
829 if (instance->params.altsetting)
830 if ((ret = usb_set_interface(usb_dev, INTERFACE_DATA, instance->params.altsetting)) < 0) {
831 usb_err(usbatm, "%s: setting interface to %2d failed (%d)!\n", __func__, instance->params.altsetting, ret);
832 instance->params.altsetting = 0; /* fall back to default */
833 }
834
835 if (!instance->params.altsetting && use_isoc)
836 if ((ret = usb_set_interface(usb_dev, INTERFACE_DATA, DEFAULT_ISOC_ALTSETTING)) < 0) {
837 usb_dbg(usbatm, "%s: setting interface to %2d failed (%d)!\n", __func__, DEFAULT_ISOC_ALTSETTING, ret);
838 use_isoc = 0; /* fall back to bulk */
839 }
840
841 if (use_isoc) {
842 const struct usb_host_interface *desc = data_intf->cur_altsetting;
843 const __u8 target_address = USB_DIR_IN | usbatm->driver->isoc_in;
844
845 use_isoc = 0; /* fall back to bulk if endpoint not found */
846
847 for (i = 0; i < desc->desc.bNumEndpoints; i++) {
848 const struct usb_endpoint_descriptor *endpoint_desc = &desc->endpoint[i].desc;
849
850 if ((endpoint_desc->bEndpointAddress == target_address)) {
851 use_isoc =
852 usb_endpoint_xfer_isoc(endpoint_desc);
853 break;
854 }
855 }
856
857 if (!use_isoc)
858 usb_info(usbatm, "isochronous transfer not supported - using bulk\n");
859 }
860
861 if (!use_isoc && !instance->params.altsetting)
862 if ((ret = usb_set_interface(usb_dev, INTERFACE_DATA, DEFAULT_BULK_ALTSETTING)) < 0) {
863 usb_err(usbatm, "%s: setting interface to %2d failed (%d)!\n", __func__, DEFAULT_BULK_ALTSETTING, ret);
864 goto fail_free;
865 }
866
867 if (!instance->params.altsetting)
868 instance->params.altsetting = use_isoc ? DEFAULT_ISOC_ALTSETTING : DEFAULT_BULK_ALTSETTING;
869
870 usbatm->flags |= (use_isoc ? UDSL_USE_ISOC : 0);
871
872 INIT_WORK(&instance->status_check_work, speedtch_check_status);
873 init_timer(&instance->status_check_timer);
874
875 instance->status_check_timer.function = speedtch_status_poll;
876 instance->status_check_timer.data = (unsigned long)instance;
877 instance->last_status = 0xff;
878 instance->poll_delay = MIN_POLL_DELAY;
879
880 init_timer(&instance->resubmit_timer);
881 instance->resubmit_timer.function = speedtch_resubmit_int;
882 instance->resubmit_timer.data = (unsigned long)instance;
883
884 instance->int_urb = usb_alloc_urb(0, GFP_KERNEL);
885
886 if (instance->int_urb)
887 usb_fill_int_urb(instance->int_urb, usb_dev,
888 usb_rcvintpipe(usb_dev, ENDPOINT_INT),
889 instance->int_data, sizeof(instance->int_data),
890 speedtch_handle_int, instance, 16);
891 else
892 usb_dbg(usbatm, "%s: no memory for interrupt urb!\n", __func__);
893
894 /* check whether the modem already seems to be alive */
895 ret = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0),
896 0x12, 0xc0, 0x07, 0x00,
897 instance->scratch_buffer + OFFSET_7, SIZE_7, 500);
898
899 usbatm->flags |= (ret == SIZE_7 ? UDSL_SKIP_HEAVY_INIT : 0);
900
901 usb_dbg(usbatm, "%s: firmware %s loaded\n", __func__, usbatm->flags & UDSL_SKIP_HEAVY_INIT ? "already" : "not");
902
903 if (!(usbatm->flags & UDSL_SKIP_HEAVY_INIT))
904 if ((ret = usb_reset_device(usb_dev)) < 0) {
905 usb_err(usbatm, "%s: device reset failed (%d)!\n", __func__, ret);
906 goto fail_free;
907 }
908
909 usbatm->driver_data = instance;
910
911 return 0;
912
913fail_free:
914 usb_free_urb(instance->int_urb);
915 kfree(instance);
916fail_release:
917 speedtch_release_interfaces(usb_dev, num_interfaces);
918 return ret;
919}
920
921static void speedtch_unbind(struct usbatm_data *usbatm, struct usb_interface *intf)
922{
923 struct usb_device *usb_dev = interface_to_usbdev(intf);
924 struct speedtch_instance_data *instance = usbatm->driver_data;
925
926 usb_dbg(usbatm, "%s entered\n", __func__);
927
928 speedtch_release_interfaces(usb_dev, usb_dev->actconfig->desc.bNumInterfaces);
929 usb_free_urb(instance->int_urb);
930 kfree(instance);
931}
932
933
934/***********
935** init **
936***********/
937
938static struct usbatm_driver speedtch_usbatm_driver = {
939 .driver_name = speedtch_driver_name,
940 .bind = speedtch_bind,
941 .heavy_init = speedtch_heavy_init,
942 .unbind = speedtch_unbind,
943 .atm_start = speedtch_atm_start,
944 .atm_stop = speedtch_atm_stop,
945 .bulk_in = ENDPOINT_BULK_DATA,
946 .bulk_out = ENDPOINT_BULK_DATA,
947 .isoc_in = ENDPOINT_ISOC_DATA
948};
949
950static int speedtch_usb_probe(struct usb_interface *intf, const struct usb_device_id *id)
951{
952 return usbatm_usb_probe(intf, id, &speedtch_usbatm_driver);
953}
954
955module_usb_driver(speedtch_usb_driver);
956
957MODULE_AUTHOR(DRIVER_AUTHOR);
958MODULE_DESCRIPTION(DRIVER_DESC);
959MODULE_LICENSE("GPL");
960MODULE_VERSION(DRIVER_VERSION);